王建军｜东北大学｜学者主页

2026

Advancements in novel gas atomization techniques for metal powders in additive manufacturing

Guang Yang, Jun Xie, Hao Wu, Yuejiao Ma, Jianjun Wang, Jingjing Liang, Jinguo Li

Powder Technology

DOI

2025

通过深冷处理耦合高温快速回火显著提高超细贝氏体钢性能

王建军，孙东云，张玉杰，苏瑛龙，杨志南，冯晓勇，张福成

《钢铁》

DOI

2025

Formation mechanisms of the mixed-grain structures in 20CrNiMo steel during warm forging and subsequent heat treatment

Bo Li, Gang Lu, Xutao Huang, Wenxin Wang, Xi Wang, Yujie Liu, Sixin Zhao, Jianjun Wang

Journal of Materials Science

DOI

2025

Electropulsing-enhanced dissolution of Laves phase and tensile properties in laser additively manufactured 718Plus alloy

Zhipeng Zhang, Jide Liu, Jingdong Guo, Jinchao Ma, Xinguang Wang, Yizhou Zhou, Jianjun Wang, Jinguo Li

Materials Science and Engineering A

DOI

2025

Electropulsing-induced high-density annealing twins: A novel strategy to enhance ductility in additively manufactured 718Plus alloy

Zhipeng Zhang, Jide Liu, Xinyi Luo, Jiacheng Yan, Jingdong Guo, Jinchao Ma, Chongwei Zhu, Xinguang Wang, Yizhou Zhou, Jianjun Wang, Jinguo Li

Journal of Material Science and Technology

DOI

2025

Tailoring the strength and self-lubricating properties of wear-resistant steel based on martensite-induced graphitization

Xi Wang, Xutao Huang, Xutao Huang, Gang Lu, Wenxin Wang, Wenxin Wang, Bo Li, Yujie Liu, Jianjun Wang

Materials Today Communications

DOI

2024

Refinement of cast microstructure of A517 steel by addition of TiB2

Guofang Liang, Yingang Liu, Xianliang Yang, Qiyang Tan, Tao Wu, Jianjun Wang, Andrej Atrens, Zhi-qiang Tian, Mingxing Zhang

Journal of Iron and Steel Research International

DOI

2024

Revealing the mechanism of ductility discrepancy between two 2205 duplex stainless steels containing layered and island austenite through in-situ experiment

Wenxin Wang, Wenxin Wang, Gang Lu, Haitao Huang, Haitao Huang, Yu-Jie Liu, Jianjun Wang, Chunming Liu

Materials Science and Engineering A

DOI

2024

Experimental and theoretical studies on a Mg2InRE-type prismatic precipitate plate in a series of Mg-In-RE ternary alloys

Q.Y. Huang, J.S. Chen, Cui-cui Ji, Jianjun Wang, B.Z. Sun

Materials Letters

DOI

2024

Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting

Shuancheng Meng, Minqiang Gao, Yan Liu, Yang Li, Huan Ma, Jiehua Li, Jianjun Wang, Renguo Guan

Journal of Material Science and Technology

DOI

2024

Achieving superior strength-ductility synergy of 2205 duplex stainless steel via dual-heterogeneous structure design

Wenxin Wang, Xi Wang, Gang Lu, Xi Wang, Bo Li, Yujie Liu, Jianjun Wang, Chunming Liu

Journal of Material Science and Technology

DOI

2023

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Ying Yuan, Jianjun Wang, Jie Wei, W.Y. Chen, Haile Yan, Nan Jia

Journal of Alloys and Compounds

DOI

2023

Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of the Brazed Joint of a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy

Zhipeng Zhang, Jide Liu, Chongwei Zhu, Yuyu Huang, Xinguang Wang, Yizhou Zhou, Jianjun Wang, Jinguo Li

Materials

DOI

2023

Dynamic recrystallization and constitutive equation of 15Cr-10Mn-Ni-N steel under hot deformation

Yan Qing Wang, Y.F. Shen, Nan Jia, Jianjun Wang, W.Y. Xue

Materials Today Communications

DOI

2023

Grain refinement of A517 steel by inoculation with Al–5Ti–B master alloy

Guofang Liang, Yingang Liu, Xianliang Yang, Andrej Atrens, Tao Wu, Zhiqiang Tian, Qiyang Tan, Yu Jun Yin, Jianjun Wang, Mingxing Zhang

Materials Chemistry and Physics

DOI

2023

Ferrite-austenite synergistic deformation behavior in a 2205 duplex stainless steel containing equiaxed austenite domains

Wenxin Wang, Jianjun Wang, Qiang Wang, Xutao Huang, Gang Lu, Yujie Liu, Chunming Liu

Materials Characterization

DOI

2022

Accelerated biocorrosion of stainless steel in marine water via extracellular electron transfer encoding gene phzH of Pseudomonas aeruginosa

Enze Zhou, Mingxing Zhang, Ye Huang, Huabing Li, Jianjun Wang, Guangming Jiang, Cheng‐Ying Jiang, Dake Xu, Qiang Wang, Fuhui Wang

Water Research

DOI

2022

Direct microbial electron uptake as a mechanism for stainless steel corrosion in aerobic environments

Enze Zhou, Feng Li, Dawei Zhang, Dake Xu, Zhong Li, Ru Jia, Yuting Jin, Hao Song, Huabing Li, Qiang Wang, Jianjun Wang, Xiaogang Li, Tingyue Gu, Axel M. Homborg, J.M.C. Mol, Jessica A. Smith, Fuhui Wang, Derek R. Lovley

Water Research

DOI

2022

Precipitation of Ti2Al phases at lamellar interfaces in a high-Nb-containing TiAl alloy during thermal exposure

Dongxu Li, Guoying Zhang, Gang Lu, Yujie Liu, Jianjun Wang, Chunming Liu

Journal of Material Science and Technology

DOI

2021

Antibacterial activities of a novel Cu‐bearing high‐entropy alloy against multi‐drug‐resistant Acinetobacter baumannii and Staphylococcus aureus

Enze Zhou, Guangyu Ren, Yun-Ling Sun, Yongqiang Fan, Yi Yang, Mingyue Sun, Dake Xu, Yiping Lu, Jianjun Wang, Huabing Li, Fuhui Wang

Rare Metals

DOI

2021

Enhanced high-temperature age-hardening behavior and mechanical properties of Al–Mg–Si alloys via microalloying with Cd

Gang Lu, Bo Sun, Jianjun Wang, Yujie Liu, Chunming Liu

Materials Science and Engineering A

DOI

2021

On the two-dimensional prismatic platelet in the aged In-microalloyed Mg–Nd alloys

Ye Tian, Jianjun Wang, Q.Y. Huang, J.X. Ren, B.Z. Sun, L.R. Liu

Materials Letters

DOI

2021

High-temperature age-hardening behavior of Al–Mg–Si alloys with varying Sn contents

Gang Lu, Bo Sun, Jianjun Wang, Yujie Liu, Chunming Liu

Journal of Materials Research and Technology

DOI

2021

High-resolution multiscale modeling of mechanical behavior of cold-drawn pearlitic steels

Xutao Huang, Jianjun Wang, Sixin Zhao, Zan Yao, Chunming Liu

Journal of Materials Research and Technology

DOI

2020

Tailoring cementite precipitation and mechanical properties of quenched and tempered steel by nickel partitioning between cementite and ferrite

F.-C. An, Jianjun Wang, Shijin Zhao, C.M. Liu

Materials Science and Engineering A

DOI

2020

The significant impact of introducing nanosize precipitates and decreased effective grain size on retention of high toughness of simulated heat affected zone (HAZ)

Jianjun Wang, Y.F. Shen, W.Y. Xue, Nan Jia, R.D.K. Misra

Materials Science and Engineering A

DOI

2020

Optimizing high-temperature oxidation behaviors of high-Nb-containing TiAl alloys by addition of boron

Dongxu Li, Guoying Zhang, Gang Lu, Jianjun Wang, Chunming Liu

Corrosion Science

DOI

2020

Effect of heating rate during solution treatment on the bendability of Al–Mg–Si alloys

Gang Lu, Jianjun Wang, Yujie Liu, Chunming Liu

Materials Science and Engineering A

DOI

2020

Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening

Zhongkai Li, Xiaotian Fang, Yanfei Wang, Ping Jiang, Jianjun Wang, C.M. Liu, Xiaolei Wu, Yuntian T. Zhu, C.C. Koch

Materials Science and Engineering A

DOI

2020

Investigation on vanadium carbide transformations in M23C6 carbide by experimental observation and crystallographic analysis

F.-C. An, Jianjun Wang, S.X. Zhao, Guo Ding Yuan, C.M. Liu

Materials Characterization

DOI

2020

Incompleteness of bainite transformation in quenched and tempered steel under continuous cooling conditions

F.-C. An, Sixin Zhao, X.-K. Xue, Jianjun Wang, Guo Ding Yuan, C.M. Liu

Journal of Materials Research and Technology

DOI

2020

WITHDRAWN: Methanogenic archaea and sulfate reducing bacteria induce severe corrosion of steel pipelines after hydrostatic testing

Enze Zhou, Jianjun Wang, Masoumeh Moradi, Huabing Li, Dake Xu, Yuntian Lou, Jinheng Luo, Lifeng Li, Yulei Wang, Zhenguo Gary Yang, Fuhui Wang, Jessica A. Smith

Journal of Material Science and Technology

DOI

2019

热压缩过程中2205双相不锈钢的组织演变和软化机制

吴天海，王建军，张影，李花兵，范光伟，刘春明

《材料研究学报》

2019

Multistage serrated flow behavior of a medium-manganese high-carbon steel

Jie Chen, Y. Zhang, Jianjun Wang, C.M. Liu, S.X. Zhao

Journal of Iron and Steel Research International

DOI

2019

Precipitation process of vanadium carbide in M23C6 by atomic-scale configuration analysis

F.-C. An, Y. Zhang, Jianjun Wang, S.X. Zhao, Guo Ding Yuan, C.M. Liu

Journal of Materials Science

DOI

2019

Twin boundary bending during tensile deformation and its temperature dependence

Jie Chen, Jianjun Wang, Guo Ding Yuan, C.M. Liu

Materials Science and Engineering A

DOI

2019

Evolution of deformation twins with strain rate in a medium-manganese wear-resistant steel Fe–8Mn–1C–1.2Cr–0.2V

Jie Chen, Jianjun Wang, H. Zhang, W.G. Zhang, C.M. Liu

Journal of Iron and Steel Research International

DOI

2019

Enhancing the bake-hardening responses of a pre-aged Al-Mg-Si alloy by trace Sn additions

Gang Lu, Shuai Nie, Jianjun Wang, Ying Zhang, Tianhai Wu, Yujie Liu, Chunming Liu

Journal of Material Science and Technology

DOI

2018

Effect of heat input on austenite microstructural evolution of simulated heat affected zone in 2205 duplex stainless steel

Tianhai Wu, Jianjun Wang, Huabing Li, Zhouhua Jiang, Chunming Liu, Hong-yang Zhang

Journal of Iron and Steel Research International

DOI

2018

Reformation Behavior of Austenite in 2205 Duplex Stainless Steel with Rapid Heat Treatment

Tianhai Wu, Jianjun Wang, Huabing Li, Zhouhua Jiang, Chunming Liu, Hongyang Zhang

steel research international

DOI

2016

2205双相不锈钢TIG焊接头组织及力学性能

李国平，王建军，吴天海，温艳慧，李花兵，刘春明

《材料研究学报》

2016

埋弧焊热输入对2205 DSS焊接接头组织及力学性能的影响

王建军，王杨，吴天海，李国平，姜周华，刘春明

《材料热处理学报》

2016

Effects of Nb and V on Microstructural Evolution, Precipitation Behavior and Tensile Properties in Hot-rolled Mo-bearing Steel

Fuming Liu, Jianjun Wang, Yujie Liu, R.D.K. Misra, Chunming Liu

Journal of Iron and Steel Research International

DOI

2013

Materials Science & Engineering A

Xin-Yan Yue, Jianjun Wang, Xiu-Mei Li, H. Ru

2013

Structure–mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling

Jun Ping Hu, Linxiu Du, Jianjun Wang, Hui Xie, Cairu Gao, R.D.K. Misra

Materials Science and Engineering A

DOI

2013

Effect of V on intragranular ferrite nucleation of high Ti bearing steel

Jun Ping Hu, Linxiu Du, Jianjun Wang

Scripta Materialia

DOI

2013

High toughness in the intercritically reheated coarse-grained (ICRCG) heat-affected zone (HAZ) of low carbon microalloyed steel

Jun Ping Hu, Linxiu Du, Jianjun Wang, Hui Xie, Cairu Gao, R.D.K. Misra

Materials Science and Engineering A

DOI

2013

Microstructures and Mechanical Properties of a New As-Hot-Rolled High-Strength DP Steel Subjected to Different Cooling Schedules

Jun Ping Hu, Linxiu Du, Jianjun Wang, Cairu Gao, Tong-Zi Yang, An-Yang Wang, R.D.K. Misra

Metallurgical and Materials Transactions A

DOI

2013

Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V–N high strength steel

Jun Ping Hu, Linxiu Du, Jianjun Wang, Cairu Gao

Materials Science and Engineering A

DOI

2012

Effect of cooling procedure on microstructures and mechanical properties of hot rolled Nb–Ti bainitic high strength steel

Jun Ping Hu, Linxiu Du, Jianjun Wang

Materials Science and Engineering A

DOI

2011

新型无Ni高N奥氏体不锈钢的低温变形行为

徐明舟，王建军，刘春明

《金属学报》

2011

氮对新型无镍高氮奥氏体不锈钢塑性流变行为的影响

徐明舟，王立军，王建军，刘春明

《材料与冶金学报》

2010

应变速率对18Cr-12Mn-0.55N高氮奥氏体不锈钢塑性流变行为的影响

徐明舟，王建军，王立军，崔文芳，刘春明

《材料与冶金学报》

2010

18%Cr-12%Mn-0.55%N高氮奥氏体不锈钢低温性能与组织稳定性

徐明舟，王立军，王建军，刘春明

《东北大学学报(自然科学版)》

2010

00Cr17高纯铁素体不锈钢热塑性的研究

张辉，王建军，刘春明

《材料科学与工艺》

2002

00Cr30Mo2铁素体不锈钢475℃脆性的研究

刘春明，崔文芳，王建军，林仁荣

《钢铁》

2001

微量碳在钢铁材料细晶强化中的作用

刘春明，王建军，林仁荣，崔文芳，白玉光

《材料科学与工艺》

2000

奥氏体不锈钢冲击力学性能及冲击诱发相变实验研究

宋顺成，丁桂保，田时雨，王建军

《兵器材料科学与工程》

精选作品

期刊论文

Advancements in novel gas atomization techniques for metal powders in additive manufacturing

通过深冷处理耦合高温快速回火显著提高超细贝氏体钢性能

Formation mechanisms of the mixed-grain structures in 20CrNiMo steel during warm forging and subsequent heat treatment

Electropulsing-enhanced dissolution of Laves phase and tensile properties in laser additively manufactured 718Plus alloy

Electropulsing-induced high-density annealing twins: A novel strategy to enhance ductility in additively manufactured 718Plus alloy

Tailoring the strength and self-lubricating properties of wear-resistant steel based on martensite-induced graphitization

Refinement of cast microstructure of A517 steel by addition of TiB2

Revealing the mechanism of ductility discrepancy between two 2205 duplex stainless steels containing layered and island austenite through in-situ experiment

Experimental and theoretical studies on a Mg2InRE-type prismatic precipitate plate in a series of Mg-In-RE ternary alloys

Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting

Achieving superior strength-ductility synergy of 2205 duplex stainless steel via dual-heterogeneous structure design

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of the Brazed Joint of a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy

Dynamic recrystallization and constitutive equation of 15Cr-10Mn-Ni-N steel under hot deformation

Grain refinement of A517 steel by inoculation with Al–5Ti–B master alloy

Ferrite-austenite synergistic deformation behavior in a 2205 duplex stainless steel containing equiaxed austenite domains

Accelerated biocorrosion of stainless steel in marine water via extracellular electron transfer encoding gene phzH of Pseudomonas aeruginosa

Direct microbial electron uptake as a mechanism for stainless steel corrosion in aerobic environments

Precipitation of Ti2Al phases at lamellar interfaces in a high-Nb-containing TiAl alloy during thermal exposure

Antibacterial activities of a novel Cu‐bearing high‐entropy alloy against multi‐drug‐resistant Acinetobacter baumannii and Staphylococcus aureus

Enhanced high-temperature age-hardening behavior and mechanical properties of Al–Mg–Si alloys via microalloying with Cd

On the two-dimensional prismatic platelet in the aged In-microalloyed Mg–Nd alloys

High-temperature age-hardening behavior of Al–Mg–Si alloys with varying Sn contents

High-resolution multiscale modeling of mechanical behavior of cold-drawn pearlitic steels

Tailoring cementite precipitation and mechanical properties of quenched and tempered steel by nickel partitioning between cementite and ferrite

The significant impact of introducing nanosize precipitates and decreased effective grain size on retention of high toughness of simulated heat affected zone (HAZ)

Optimizing high-temperature oxidation behaviors of high-Nb-containing TiAl alloys by addition of boron

Effect of heating rate during solution treatment on the bendability of Al–Mg–Si alloys

Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening

Investigation on vanadium carbide transformations in M23C6 carbide by experimental observation and crystallographic analysis

Incompleteness of bainite transformation in quenched and tempered steel under continuous cooling conditions

WITHDRAWN: Methanogenic archaea and sulfate reducing bacteria induce severe corrosion of steel pipelines after hydrostatic testing

热压缩过程中2205双相不锈钢的组织演变和软化机制

Multistage serrated flow behavior of a medium-manganese high-carbon steel

Precipitation process of vanadium carbide in M23C6 by atomic-scale configuration analysis

Twin boundary bending during tensile deformation and its temperature dependence

Evolution of deformation twins with strain rate in a medium-manganese wear-resistant steel Fe–8Mn–1C–1.2Cr–0.2V

Enhancing the bake-hardening responses of a pre-aged Al-Mg-Si alloy by trace Sn additions

Effect of heat input on austenite microstructural evolution of simulated heat affected zone in 2205 duplex stainless steel

Reformation Behavior of Austenite in 2205 Duplex Stainless Steel with Rapid Heat Treatment

2205双相不锈钢TIG焊接头组织及力学性能

埋弧焊热输入对2205 DSS焊接接头组织及力学性能的影响

Effects of Nb and V on Microstructural Evolution, Precipitation Behavior and Tensile Properties in Hot-rolled Mo-bearing Steel

Materials Science & Engineering A

Structure–mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling

Effect of V on intragranular ferrite nucleation of high Ti bearing steel

High toughness in the intercritically reheated coarse-grained (ICRCG) heat-affected zone (HAZ) of low carbon microalloyed steel

Microstructures and Mechanical Properties of a New As-Hot-Rolled High-Strength DP Steel Subjected to Different Cooling Schedules

Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V–N high strength steel

Effect of cooling procedure on microstructures and mechanical properties of hot rolled Nb–Ti bainitic high strength steel

新型无Ni高N奥氏体不锈钢的低温变形行为

氮对新型无镍高氮奥氏体不锈钢塑性流变行为的影响

应变速率对18Cr-12Mn-0.55N高氮奥氏体不锈钢塑性流变行为的影响

18%Cr-12%Mn-0.55%N高氮奥氏体不锈钢低温性能与组织稳定性

00Cr17高纯铁素体不锈钢热塑性的研究

00Cr30Mo2铁素体不锈钢475℃脆性的研究

微量碳在钢铁材料细晶强化中的作用

奥氏体不锈钢冲击力学性能及冲击诱发相变实验研究

研究方向