郭俊卿｜河南科技大学｜学者主页

2026

直写成型金属微粒悬浮液流变特性及动力粘度研究

郭恒锐，郭俊卿，陈拂晓，皇涛，相楠

《塑性工程学报》

2026

316L不锈钢微粒直写成型稳定区间研究

黄明强，郭俊卿，相楠，陈拂晓，张信民

《塑性工程学报》

2026

Suppressing the Bending Springback of TA15 Titanium Alloy through a Current-Assisted Heat Treatment

Guoxin Pang, Zhu-Bin He, Ming-Hao Li, Yan-Chao Jiang, Xue-Wen Chen, Junqing Guo, Nan Xiang, Hai-Rui Zhang, Guo-Qing Chen

Journal of materials engineering and performance (Print)

DOI

2026

Achieving good strength-ductility synergy by architecting a three-level hierarchical near alpha titanium alloy with <0001> micro-texture

Hai-Rui Zhang, Fei-Yan Chen, Chu Cheng, Pei Liu, Jing-Zhao Yang, Yanchao Jiang, Meng Zhang, Nan Xiang, Guoxin Pang, Ying Zhang, Junqing Guo, De-Liang Zhang

Journal of Alloys and Compounds

DOI

2026

A novel composite punch design for current-assisted bending forming

Guo-Xing Pang, Guo-Qing Chen, Ming-Hao Li, Xue-Wen Chen, Junqing Guo, Nan Xiang, Yan-Chao Jiang, Hai-Rui Zhang

International Journal of Material Forming

DOI

2025

高压冷喷涂铁颗粒碰撞变形行为及组织性能

魏慧霞，郭俊卿，相楠，张信民

《塑性工程学报》

2025

TA15钛合金电流辅助V型弯曲成形工艺研究

庞国鑫，张宝，李明浩，祖宇飞，李细锋，付雪松，周文龙，郭俊卿，相楠，陈国清

《塑性工程学报》

2025

Effect of billet temperature on deformation heat and forming quality of magnesium alloy wheel produced by backward extrusion

Yan-Chao Jiang, Ya-Tong Zhu, Xue-Wen Chen, Qichi Le, Xi Yang, Hai-Rui Zhang, Junqing Guo, Tong Wang

The International Journal of Advanced Manufacturing Technology

DOI

2025

The Impact of Pulse Current on the Deformation and Damage Behavior of Cu/Al Layered Composites

Tao Huang, Mu Qiao, Bing-Hui Xing, Siliang Yan, Nan Xiang, Junqing Guo, Liang Huang, Wenjing Zhang

JOM

DOI

2025

Influence of die differential temperature settings on magnesium alloy wheels formed by backward extrusion

Yan-Chao Jiang, Qichi Le, Hai-Rui Zhang, Nan Xiang, Junqing Guo, Chenglin Li, Qingfei Hao, Xuewen Chen, Wen-Yi Hu, Qiyu Liao

Thermal Science and Engineering Progress

DOI

2025

Simulation on Deformation Heat and Microstructure of Magnesium Alloy Wheels with Varying Rim Wall Thicknesses Formed by Back Extrusion

Yan-Chao Jiang, Nan Xiang, Hai-Rui Zhang, Qichi Le, Qiyu Liao, Junqing Guo, Xuewen Chen

Journal of materials engineering and performance (Print)

DOI

2025

Suppression of self-corrosion in Mg-7Al-2Zn alloy by rolling-annealing and La alloying

Bo Wang, Shizhong An, Shizhong An, Wuhui Li, Guangjian Wang, Junqing Guo

Materials Today Communications

DOI

2024

5.5Al-AFA耐热钢高温蠕变行为研究

郭俊卿，刘玲，孙红英，田德阳，陈拂晓

《塑性工程学报》

2024

Mg-Gd-Y-Zn-Zr镁合金的LPSO相演化及其强化机制

张林林，郭俊卿，董帅，皇涛，陈拂晓

《塑性工程学报》

2024

商用MB1和MB8镁合金在NaCl溶液中的电化学性能

王博，安士忠，郭俊卿，纪运广，李志强

《中国腐蚀与防护学报》

2024

基于响应面法的镁合金轮毂等温成形过渡区折叠缺陷的预测

李富猛，郭俊卿，陈拂晓，相楠

《精密成形工程》

2024

Dislocation motion induced by pulse current in Ti/Al bimetal composite observed by in-situ TEM

Tao Huang, Bing-Hui Xing, Ke-Xing Song, Nan Xiang, Liu-Jie Xu, Liang Huang, Junqing Guo, Xiubo Yang

Materials Characterization

DOI

2024

Effects of electrical pulse on metal deformation behaviors

Tao Huang, Fan Yang, Bing-Hui Xing, Ke-Xing Song, Nan Xiang, Yan-Min Zhang, Xue-Wen Chen, Junqing Guo

Materials Research Express

DOI

2024

Phase Transformation, Microstructural Evolution and Tensile Properties of a TiH2-Based Powder Metallurgy Pure Titanium

H.R. Zhang, Cong Wang, Junqing Guo, Wuhui Li, Chu Chun Cheng, Nan Xiang, Tao Huang, H.Z. Niu, D. L. Zhang, Fuxiao Chen

Metals

DOI

2024

Improved Discharge Performance of AZ72-0.05La Alloy Anode via Refining Mg17Al12 Phase

Junqing Guo, Bo Wang, Shizhong An

Metals

DOI

2024

Creep deformation and damage behavior of an alumina-forming austenitic alloy strengthened by intermetallic compounds

Ling Liu, Benjamín Girón-Palomares, Fuxiao Chen, Hongying Sun, Junqing Guo

Intermetallics

DOI

2024

Real-time and selective control of shell deformation based on dynamic and subregional pressure response of flexible dies under magnetic field

Nan Xiang, Haoran Wang, Pengyi Wang, Tao Huang, Junqing Guo, Yaoli Wang, Fuxiao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2023

电流辅助成形中位错演化行为研究进展

肖志涛，皇涛，邢兵辉，陈拂晓，宋克兴，郭俊卿，张彦敏

《塑性工程学报》

2023

固体颗粒介质成形工艺进展

刘骥飞，郭俊卿，相楠，陈拂晓，皇涛，裴彦博

《热加工工艺》

2023

Fe-30Ni-15Cr-0.6Nb-3Al-2Mo-3.5Cu奥氏体耐热钢高温蠕变行为

郭俊卿，田德阳，孙红英，陈拂晓，刘玲

《塑性工程学报》

2023

3Al AFA钢的高温拉伸变形行为

刘玲，陈拂晓，孙红英，郭俊卿，相楠

《塑性工程学报》

2023

直写成型中金属微粒悬浮液相分离数值模拟研究

郭俊卿，郭恒锐，陈拂晓，相楠

《塑性工程学报》

2023

基于界面影响区特征的铜/铝复合板损伤行为研究

蒋经轩，皇涛，陈拂晓，郭晓晓，郭俊卿，相楠，邢兵辉，肖志涛

《精密成形工程》

2023

Characterization of Microstructure and Tensile Properties of a New Alumina-Forming Austenitic Alloy at High Temperatures

Ling Liu, Fuxiao Chen, Hongying Sun, Junqing Guo, Nan Xiang, Tao Huang

Journal of Materials Engineering and Performance

DOI

2023

Interfacial Bonding and Fracture Behaviors of AZ63 Magnesium Alloy Sheet Processed by Accumulative Roll Bonding

Junqing Guo, Wanting Sun, Nan Xiang, Fuxiao Chen

Materials

DOI

2023

Dynamic strain aging behavior of an advanced alumina-forming austenite stainless steel based on Fe–30Ni–15Cr–3.5Al

Ling Liu, Fuxiao Chen, Hongying Sun, Junqing Guo, Nan Xiang, Tao Huang

Journal of Materials Research and Technology

DOI

2023

Thermal and non-thermal effects of Cu/Al laminated composite during electrically assisted tension

Tao Huang, Binghui Xing, Kexing Song, Liujie Xu, Siliang Yan, Nan Xiang, Junqing Guo, Xuebin Zhang, Liang Huang

Materials Science and Engineering A

DOI

2023

Inhibiting plastic tensile instability of non-symmetric thin-walled shell component via increasing regional metal inflow based on heterogeneous pressure-carrying medium

Nan Xiang, Yi-quan Shu, Pengyi Wang, Menghan Yang, Haoran Wang, Tao Huang, Junqing Guo, Fuxiao Chen

Chinese Journal of Aeronautics

DOI

2023

Numerical investigation of controllable non-uniform deformation of tailor-welded blanks using heterogeneous pressure-carrying medium

Yi-quan Shu, Nan Xiang, Haoran Wang, Meng-han Yang, Pengyi Wang, Tao Huang, Junqing Guo, Fuxiao Chen

Thin-Walled Structures

DOI

2023

A novel layered finite element model for predicting the damage behavior of metal laminated composite

Tao Huang, Yanbo Pei, Fuxiao Chen, Kun Wang, Junqing Guo, Binghui Xing, Nan Xiang, Kexing Song

Composite Structures

DOI

2023

Regional control of sheet metal formability via establishing differentiated pressure field using heterogeneous elastomers in flexible die forming process

Yi-quan Shu, Nan Xiang, Haoran Wang, Meng-han Yang, Pengyi Wang, Tao Huang, Guo Jun-qing, Fuxiao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2022

加载工况对弹性模成形过程中轻合金薄板成形性的影响

许东方，温光磊，王志飞，林永健，相楠，郭俊卿

《锻压技术》

2022

Fe-15Cr-27Ni-4Al-2Mo-0.6Nb奥氏体耐热钢的热变形行为

樊翠林，孙红英，陈拂晓，刘玲，郭俊卿，相楠

《塑性工程学报》

2022

固体颗粒介质的侧压力预测模型及实验

刘骥飞，郭俊卿，相楠，陈拂晓，侯成龙，张文雅

《塑性工程学报》

2022

金属粉末注射成形技术及其数值模拟

侯成龙，郭俊卿，陈拂晓，皇涛

《粉末冶金技术》

2022

Research Progress of Alumina-Forming Austenitic Stainless Steels: A Review

Ling Liu, Cuilin Fan, Hongying Sun, Fuxiao Chen, Junqing Guo, Tao Huang

Materials

DOI

2022

Optimized shape calibration process using flexible dies for annular and rectangular corners with small radius of thin-walled shell components

Yi-quan Shu, Nan Xiang, Haoran Wang, Pengyi Wang, Tao Huang, Zhi-fei Wang, Yong-jian Lin, Guo Jun-qing

The International Journal of Advanced Manufacturing Technology

DOI

2022

Increased sheet-forming capability via controlling in-plane stress state of the sheet metal using hetero-structured flexible dies

Nan Xiang, Tao Huang, Pengyi Wang, Lihuang Zheng, Guo Jun-qing, Xiuhua Guo, Fuxiao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2021

镁合金汽车轮毂低压铸造工艺进展

郭俊卿，樊翠林，陈拂晓

《铸造》

2021

Improved forming accuracy through controlling localized sheet metal deformation in the friction-assisted stretch bending process

Nan Xiang, Yi-quan Shu, Pengyi Wang, Tao Huang, Xiuhua Guo, Junqing Guo, Xuewen Chen, Fuxiao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2020

不同应力状态下Ti-Al层状复合板各向异性行为研究

宋卓，皇涛，陈拂晓，郭俊卿，裴彦博，高琰，钟时雨

《塑性工程学报》

2020

Influence of the Anisotropy on the Microstructure and Mechanical Properties of Ti/Al Laminated Composites

Tao Huang, Zhuo Fei Song, Fuxiao Chen, Junqing Guo, Yanbo Pei, Binghui Xing, Nan Xiang, Kexing Song

Materials

DOI

2020

Microstructure and fracture mechanism of Ti/Al layered composite fabricated by explosive welding

Yanbo Pei, Tao Huang, Fuxiao Chen, Bo Pang, Junqing Guo, Nan Xiang, Zhuo Fei Song, Yi Zhang

Vacuum

DOI

2020

Microstructure and corrosion behaviors of AZ63 magnesium alloy fabricated by accumulative roll bonding process

Yanbo Pei, Yunwei Gui, Tao Huang, Fuxiao Chen, Junqing Guo, Shiyu Zhong, Zhuo Fei Song

Materials Research Express

DOI

2019

Ti-Al层状复合板Ⅱ型层间断裂关键参量研究

王锟，皇涛，陈拂晓，詹梅，郭俊卿，李艳阳，裴彦博

《塑性工程学报》

2019

累积叠轧工艺对AZ63镁合金耐蚀性能的影响

于孟华，郭俊卿，陈拂晓，皇涛，钟时雨

《塑性工程学报》

2019

材料参数波动对钛-铝-不锈钢复合板V型弯曲回弹的影响

李艳阳，皇涛，郭俊卿，王锟，宋卓

《锻压技术》

DOI

2019

Wall Thinning Characteristics of Ti-3Al-2.5V Tube in Numerical Control Bending Process

皇涛，王锟，詹梅，郭俊卿，陈学文，陈拂晓，宋克兴

Journal of Shanghai Jiaotong University(Science)

2019

钛-铝层状复合板冷塑性变形过程损伤演化行为

皇涛，王锟，陈拂晓，郭俊卿，陈学文，宋克兴

《河南科技大学学报(自然科学版)》

2019

Establishment of Constitutive Relationships for Laminated Composites Considering the Variation of the Microhardness with the Strain in the Heterostructure Layers and Bonding Regions

Tao Huang, Mei Zhan, Yanbo Pei, Nan Xiang, Yang Fangfang, Yanyang Li, Junqing Guo, Xuewen Chen, Fuxiao Chen

JOM

DOI

2019

In-situ observation of crack evolution in Ti/Al laminated composite

Yanbo Pei, Tao Huang, Fuxiao Chen, Mei Zhan, Junqing Guo, Zhuo Fei Song, Luge Bai

Composite Interfaces

DOI

2018

TA18高强钛管数控弯曲成形截面扁化研究（英文）

皇涛，杨方方，詹梅，郭俊卿，陈学文，陈拂晓，宋克兴

《稀有金属材料与工程》

2018

AZ63镁合金累积叠轧界面结合机制的研究

郭俊卿，丁祎，陈拂晓，皇涛，张信民

《塑性工程学报》

2018

异质金属层状复合板分层应力-应变关系研究

杨方方，皇涛，陈拂晓，詹梅，郭俊卿，王锟，李艳阳，陈学文

《塑性工程学报》

2018

LA91超塑性变形力学性能研究

宋昊飞，郭俊卿，皇涛，詹梅，颜炎，陈拂晓

《塑性工程学报》

2018

Section Flattening in Numerical Control Bending Process of TA18 High Strength Tube

Huang Tao, Yang Fangfang, Zhan Mei, Guo Junqing, Chen Xuewen, Chen Fuxiao, Song Kexing

《稀有金属材料与工程》

DOI

2017

TA1纯钛板成形极限图测定及应用

梁鹏飞，陈拂晓，郭俊卿，皇涛

《塑性工程学报》

2017

AZ63镁合金累积叠轧界面焊合条件研究

丁祎，陈拂晓，郭俊卿，皇涛

《塑性工程学报》

2016

工业纯钛TA1薄板杯突试验及其数值模拟

梁鹏飞，陈拂晓，郭俊卿

《锻压技术》

2016

轧制参数对钢球螺旋孔型斜轧工艺的影响

辛选荣，王乐伟，郭俊卿，张彦敏

《锻压技术》

2016

基于Ta过渡层的钛与不锈钢电阻点焊

邱然锋，侯龙龙，李丹，石红信，郭俊卿

《电焊机》

2016

AZ41M镁合金动态再结晶组织演变模拟

蔡志伟，陈拂晓，郭俊卿，马凤杰

《材料热处理学报》

2016

Dynamic recrystallization behavior and hot workability of AZ41M magnesium alloy during hot deformation

Zhiwei Cai, Fuxiao Chen, Fengjie Ma, Junqing Guo

Journal of Alloys and Compounds

DOI

2015

AZ41M镁合金动态再结晶临界条件

蔡志伟，陈拂晓，郭俊卿

《中国有色金属学报》

2015

AZ41M镁合金热变形行为及本构方程

蔡志伟，陈拂晓，郭俊卿

《材料热处理学报》

2015

Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strain

Zhiwei Cai, Fuxiao Chen, Junqing Guo

Journal of Alloys and Compounds

DOI

2014

Reflection on the “Excellent Engineers Training Plan” Practical Teaching Establishment of Material Forming and Control Engineering Specialty

Ranfeng Qiu, Fuxiao Chen, Keke Zhang, Junqing Guo

Advances in intelligent systems research/Advances in Intelligent Systems Research

DOI

2013

硅颗粒增强铝基复合材料增强体分布均匀性研究

宁晓兵，杨永顺，杨茜，郭俊卿，陈超群

《铸造技术》

2013

4032铝合金的高温压缩变形行为及本构方程

陈强，陈拂晓，杨永顺，郭俊卿

《热加工工艺》

2013

镁合金变截面曲管塑性成形工艺参数研究

郭俊卿，董朝阁，李金才，周兰，杨雪梅，曹盛昌

《机床与液压》

2013

4032铝合金热加工图及热变形机理研究

陈强，刘华平，陈拂晓，杨永顺，郭俊卿

《锻压装备与制造技术》

2012

粉末冶金工艺对4A11铝合金致密度的影响

杨永顺，冯科，郭俊卿，尹甜甜

《锻压技术》

2012

中间退火对Cu-15Fe-0.15Zr原位复合材料性能的影响

郭俊卿，杨合，刘平，贾淑果，黄华

《塑性工程学报》

2012

AZ31B镁合金热压缩变形的组织变化与变形机制

陈拂晓，郭俊卿，孙付涛

《塑性工程学报》

2012

ZK60镁合金板材成形性能试验

程文杰，陈拂晓，郭俊卿

《塑性工程学报》

2012

Research on the formability of ZK60 magnesium alloy sheet

Guo Jun-qing

Suxing gongcheng xuebao

2011

准双曲面齿轮主动轮精锻的数值模拟

王建华，陈拂晓，邓效忠，王建伟，郭俊卿

《锻压技术》

2011

镁合金汽车轮毂塑性成形研究

杨永顺，郭俊卿，陈拂晓

《锻压技术》

2011

重载汽车变速箱滑动拨块挤压成形的数值模拟

杨永顺，杨栋栋，郭俊卿

《热加工工艺》

2011

AZ31B镁合金热压缩力学行为与本构方程建立

陈拂晓，郭云汉，郭俊卿，孙付涛

《锻压技术》

2011

AZ80A镁合金动态再结晶研究

杨永顺，杨明，郭俊卿

《热加工工艺》

2011

准双曲面齿轮制造技术

王建华，陈拂晓，邓效忠，高振山，郭俊卿

《锻压技术》

2011

Hypoid gear manufacturing technology

Guo Junqing

Duanya jishu

2011

Research on Dynamic Recrystallization of AZ80A Alloy

Guo Jun-qing

Rejiagong gongyi

2010

镁合金轮毂的塑性成形技术

殷银银，杨永顺，郭俊卿

《热加工工艺》

2010

气压浸渗法制备Al2O3（sf）/Al复合材料的缺陷分析

赵文侠，杨永顺，郭俊卿，冯科

《热加工工艺》

2010

镁合金轮毂等温挤压与胀形工艺研究

殷银银，杨永顺，郭俊卿

《锻压技术》

2010

Notice of Retraction: Numerical simulation and experiment on precision forging of driven spiral bevel gear

Junqing Guo, Fuxiao Chen, Wenjuan Wang, Jingze Zheng, Tao Huang

International Conference on Computer Application and System Modeling

DOI

2010

Notice of Retraction: Superplasticity prediction and application of albronze based on artificial neural network

Junqing Guo, Fuxiao Chen, Yongshun Yang, Hejun Li

International Conference on Natural Computation (ICNC)

DOI

2009

活塞的挤压缺陷分析及工艺的数值优化

党利，杨永顺，郭俊卿

《锻压技术》

2009

螺旋伞齿轮精锻工艺研究现状与发展趋势

皇涛，陈拂晓，郭俊卿，郑建设

《热加工工艺》

2008

摩托赛车活塞挤压工艺分析及数值模拟

党利，杨永顺，郭俊卿，张轲，李书科

《热加工工艺》

2008

轴承保持架超塑成形中的损伤模拟

刘肖震，陈拂晓，郭俊卿

《河南科技大学学报(自然科学版)》

2008

直齿轮超塑挤压过程仿真与实验研究

郭俊卿，陈拂晓

《热加工工艺》

2008

铅黄铜超塑性能的人工神经网络预测

郭俊卿，陈拂晓，李合军，杨永顺

《热加工工艺》

2008

摩托车活塞挤压工艺分析与模具设计

党利，杨永顺，郭俊卿，张轲，李书科

《模具工业》

2008

Predictive model of superplastic properties of aluminum bronze and of the superplastic extrusion test

Fuxiao Chen, Hejun Li, Junqing Guo, Yongshun Yang

Materials Science and Engineering A

DOI

2007

Damage Simulation in Super-plastic Forming Process for Bearing Cage

Guo Jun-qing

Metal Hotworking Technology

2005

Design of the Drawing Die for the Tractor Body Metal Sheets Based on UG Software

Guo Junqing

Manufacturing Technology & Machine Tool

2005

Creation of Standard Parts Library in UG

Guo Junqing

Manufacturing Technology & Machine Tool

2004

The Establishment of 3D Parameterized Standard Parts Library Based on UG

Guo Junqing

China Metal Forming Equipment & Manufacturing Technology

2003

圆柱直齿轮超塑挤压的试验研究

陈拂晓，郭俊卿，杨永顺

《热加工工艺》

精选作品

期刊论文

直写成型金属微粒悬浮液流变特性及动力粘度研究

316L不锈钢微粒直写成型稳定区间研究

Suppressing the Bending Springback of TA15 Titanium Alloy through a Current-Assisted Heat Treatment

Achieving good strength-ductility synergy by architecting a three-level hierarchical near alpha titanium alloy with <0001> micro-texture

A novel composite punch design for current-assisted bending forming

高压冷喷涂铁颗粒碰撞变形行为及组织性能

TA15钛合金电流辅助V型弯曲成形工艺研究

Effect of billet temperature on deformation heat and forming quality of magnesium alloy wheel produced by backward extrusion

The Impact of Pulse Current on the Deformation and Damage Behavior of Cu/Al Layered Composites

Influence of die differential temperature settings on magnesium alloy wheels formed by backward extrusion

Simulation on Deformation Heat and Microstructure of Magnesium Alloy Wheels with Varying Rim Wall Thicknesses Formed by Back Extrusion

Suppression of self-corrosion in Mg-7Al-2Zn alloy by rolling-annealing and La alloying

5.5Al-AFA耐热钢高温蠕变行为研究

Mg-Gd-Y-Zn-Zr镁合金的LPSO相演化及其强化机制

商用MB1和MB8镁合金在NaCl溶液中的电化学性能

基于响应面法的镁合金轮毂等温成形过渡区折叠缺陷的预测

Dislocation motion induced by pulse current in Ti/Al bimetal composite observed by in-situ TEM

Effects of electrical pulse on metal deformation behaviors

Phase Transformation, Microstructural Evolution and Tensile Properties of a TiH2-Based Powder Metallurgy Pure Titanium

Improved Discharge Performance of AZ72-0.05La Alloy Anode via Refining Mg17Al12 Phase

Creep deformation and damage behavior of an alumina-forming austenitic alloy strengthened by intermetallic compounds

Real-time and selective control of shell deformation based on dynamic and subregional pressure response of flexible dies under magnetic field

电流辅助成形中位错演化行为研究进展

固体颗粒介质成形工艺进展

Fe-30Ni-15Cr-0.6Nb-3Al-2Mo-3.5Cu奥氏体耐热钢高温蠕变行为

3Al AFA钢的高温拉伸变形行为

直写成型中金属微粒悬浮液相分离数值模拟研究

基于界面影响区特征的铜/铝复合板损伤行为研究

Characterization of Microstructure and Tensile Properties of a New Alumina-Forming Austenitic Alloy at High Temperatures

Interfacial Bonding and Fracture Behaviors of AZ63 Magnesium Alloy Sheet Processed by Accumulative Roll Bonding

Dynamic strain aging behavior of an advanced alumina-forming austenite stainless steel based on Fe–30Ni–15Cr–3.5Al

Thermal and non-thermal effects of Cu/Al laminated composite during electrically assisted tension

Inhibiting plastic tensile instability of non-symmetric thin-walled shell component via increasing regional metal inflow based on heterogeneous pressure-carrying medium

Numerical investigation of controllable non-uniform deformation of tailor-welded blanks using heterogeneous pressure-carrying medium

A novel layered finite element model for predicting the damage behavior of metal laminated composite

Regional control of sheet metal formability via establishing differentiated pressure field using heterogeneous elastomers in flexible die forming process

加载工况对弹性模成形过程中轻合金薄板成形性的影响

Fe-15Cr-27Ni-4Al-2Mo-0.6Nb奥氏体耐热钢的热变形行为

固体颗粒介质的侧压力预测模型及实验

金属粉末注射成形技术及其数值模拟

Research Progress of Alumina-Forming Austenitic Stainless Steels: A Review

Optimized shape calibration process using flexible dies for annular and rectangular corners with small radius of thin-walled shell components

Increased sheet-forming capability via controlling in-plane stress state of the sheet metal using hetero-structured flexible dies

镁合金汽车轮毂低压铸造工艺进展

Improved forming accuracy through controlling localized sheet metal deformation in the friction-assisted stretch bending process

不同应力状态下Ti-Al层状复合板各向异性行为研究

Influence of the Anisotropy on the Microstructure and Mechanical Properties of Ti/Al Laminated Composites

Microstructure and fracture mechanism of Ti/Al layered composite fabricated by explosive welding

Microstructure and corrosion behaviors of AZ63 magnesium alloy fabricated by accumulative roll bonding process

Ti-Al层状复合板Ⅱ型层间断裂关键参量研究

累积叠轧工艺对AZ63镁合金耐蚀性能的影响

材料参数波动对钛-铝-不锈钢复合板V型弯曲回弹的影响

Wall Thinning Characteristics of Ti-3Al-2.5V Tube in Numerical Control Bending Process

钛-铝层状复合板冷塑性变形过程损伤演化行为

Establishment of Constitutive Relationships for Laminated Composites Considering the Variation of the Microhardness with the Strain in the Heterostructure Layers and Bonding Regions

In-situ observation of crack evolution in Ti/Al laminated composite

TA18高强钛管数控弯曲成形截面扁化研究（英文）

AZ63镁合金累积叠轧界面结合机制的研究

异质金属层状复合板分层应力-应变关系研究

LA91超塑性变形力学性能研究

Section Flattening in Numerical Control Bending Process of TA18 High Strength Tube

TA1纯钛板成形极限图测定及应用

AZ63镁合金累积叠轧界面焊合条件研究

工业纯钛TA1薄板杯突试验及其数值模拟

轧制参数对钢球螺旋孔型斜轧工艺的影响

基于Ta过渡层的钛与不锈钢电阻点焊

AZ41M镁合金动态再结晶组织演变模拟

Dynamic recrystallization behavior and hot workability of AZ41M magnesium alloy during hot deformation

AZ41M镁合金动态再结晶临界条件

AZ41M镁合金热变形行为及本构方程

Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strain

Reflection on the “Excellent Engineers Training Plan” Practical Teaching Establishment of Material Forming and Control Engineering Specialty

硅颗粒增强铝基复合材料增强体分布均匀性研究

4032铝合金的高温压缩变形行为及本构方程

镁合金变截面曲管塑性成形工艺参数研究

4032铝合金热加工图及热变形机理研究

粉末冶金工艺对4A11铝合金致密度的影响

中间退火对Cu-15Fe-0.15Zr原位复合材料性能的影响