周晓光｜东北大学｜学者主页

2025

新时代徽学学科体系的建构

周晓光

《华中师范大学学报(人文社会科学版)》，Vol. 64, No. 3

下载原文

2025

热轧钢材组织性能预测——从物理模型到人机混合智能的发展与展望

吴思炜，周晓光，刘振宇，王国栋

《东北大学学报(自然科学版)》

2025

多道次变形条件下V-N微合金钢的流变应力模型

周晓光，赵金帆，姜珊，曹光明

《东北大学学报(自然科学版)》

2025

Nb微合金钢的流变应力模型

张欣瑶，王斯乔，李明杰，张欣悦，周晓光

《轧钢》

2025

Enhanced Ductility of Ferrite/Bainite Dual‐Phase Steel through the Volume Fraction Increase of Effective Ferrite

Yongling Shao, Xiaoguang Zhou, Yuqi Mao, Qiming Jiang, Zhenyu Liu, Guangming Cao, Siwei Wu

steel research international

DOI

2025

Modelling strain-induced precipitation kinetics of Nb (C, N) by symbolic regression machine learning

Zhiwei Gao, Siwei Wu, Xin Li, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu

Journal of Materials Research and Technology

DOI

2024

热轧钢材组织演变和力学性能预测——半经验模型、机器学习到工业大模型

刘振宇，吴思炜，丛津功，梁亮，周晓光，曹光明

《轧钢》

DOI

2024

ESP工艺下DP600热轧双相钢铁素体相变模型

周晓光，马鑫，姜珊，刘振宇

《东北大学学报(自然科学版)》

2024

Dynamic Deep Learning to Predict Mechanical Properties of High-Strength Low-Alloy Steels

Yang Cao, Siwei Wu, Shuai Tang, Guangming Cao, Chengde Zhang, Peter Hedström, Xiaoguang Zhou, Zhenyu Liu

Metallurgical and Materials Transactions A

DOI

2024

Advanced Lightweight Structural Materials for Automobiles: Properties, Manipulation, and Perspective

Honghe Guo, Xiaoguang Zhou, Zhenyu Liu

Science of Advanced Materials

DOI

2023

社会动员视域下民国旅外徽州人办报实践与乡土社会互动

杨龙飞，周晓光

《现代传播（中国传媒大学学报）》，Vol. 45, No. 1

下载原文

2023

融合物理冶金学与机器学习的组织性能预测及热轧工艺优化

李鑫，周晓光，曹光明，崔春圆，吴思炜，刘振宇

《冶金自动化》

2023

Machine Learning Complex Interactions Among Recovery, Precipitation, and Recrystallization for Nb Micro-Alloyed Steels

Xin Li, Qiming Jiang, Xiaoguang Zhou, Guangming Cao, Guodong Wang, Zhenyu Liu

Metals and Materials International

DOI

2023

Austenite Grain Growth and its Equation in the Austenitizing Process for 700 MPa Grade High-Strength Steel

Xiaoguang Zhou, Xin Li, Caiyou Zeng, Siwei Wu, Zhenyu Liu

Transactions of the Indian Institute of Metals

DOI

2023

Machine learning interphase precipitation behavior of Ti micro-alloyed steel guided by physical metallurgy principle

Xin Shane Li, Qiming Jiang, Xiaoguang Zhou, Siwei Wu, Guangming Cao, Zhenyu Liu

Journal of Materials Research and Technology

DOI

2023

Physical Metallurgy Guided Machine Learning for Strain‐Induced Precipitation of Nb (C, N) Based on the Orthogonalized Small Data

Xin Li, Qiming Jiang, Chunyuan Cui, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu

steel research international

DOI

2023

Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and its Extrapolation to Static Softening Kinetics

Xin Li, Qiming Jiang, Xiaoguang Zhou, Siwei Wu, Guangming Cao, Zhenyu Liu

Journal of Materials Engineering and Performance

DOI

2023

The Prediction of the Mechanical Properties for Hot-Rolled Nb Micro-Alloyed Dual-Phase Steel Based on Microstructure Characteristics

Xin Li, Xiaoguang Zhou, Qiming Jiang, Zhenyu Liu

JOM

DOI

2022

税制变革、基层行政与近代徽州茶叶贸易

王灿，周晓光

《安徽大学学报(哲学社会科学版)》，Vol. 46, No. 6

下载原文

2022

板带热轧过程耦合机器学习及生产过程多目标优化

刘振宇，周晓光，曹光明，吴思炜，王国栋

《轧钢》

DOI

2022

The coupling machine learning for microstructural evolution and rolling force during hot strip rolling of steels

Chunyuan Cui, Guangming Cao, Xin Li, Zhiwei Gao, Xiaoguang Zhou, Zhenyu Liu

Journal of Materials Processing Technology

DOI

2021

晚清茶税与徽茶外销"问题"

盛海生，周晓光

《中国社会经济史研究》，No. 4

下载原文 DOI

2021

徽州谱牒中"溢真"现象的文本解读——以新安东关济阳江氏宗族为中心

周晓光，江一方

《安徽大学学报(哲学社会科学版)》，Vol. 45, No. 1

下载原文 DOI

2021

ESP工艺下低碳钢奥氏体演变行为

周晓光，王铎，张东航，刘振宇

《东北大学学报(自然科学版)》

2021

Modeling of the Dynamic Recrystallization of Ti Microalloyed High‐Strength Steel

Xiaoguang Zhou, Xixiang Wang, Xin Li, Zhenyu Liu

steel research international

DOI

2021

Hot deformation behavior of C276 superalloy in shifted strain rate compression: Experiments and cellular automaton modelling

Chi Zhang, Yanxin Du, Liwen Zhang, Chen Jin, Xiaoguang Zhou, Fei Li

Journal of Alloys and Compounds

DOI

2021

Controlled Rolling of X80 Pipeline Steel in the Austenite Recrystallization Temperature Region and Its Effect on the Microstructure and Mechanical properties

Xiaoguang Zhou, Hua Long Li, Qiyuan Chen, Zhenyu Liu

steel research international

DOI

2021

Reductions of Intergranular Corrosion Resistance and Wear Resistance in a Ni-Cr-Mo-Based Superalloy by Aging-Treatment-Induced Precipitation

Pengyan Zhang, Chi Zhang, Xiaoguang Zhou, Zhenyi Huang

Metals

DOI

2021

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

Xin Shane Li, Xiaoguang Zhou, Guangming Cao, Shaohua Xu, Yong Wang, Zhenyu Liu

Metallurgical and Materials Transactions A

DOI

2020

明代军解研究

周晓光，刘永晋

《安徽大学学报(哲学社会科学版)》，Vol. 44, No. 1

下载原文 DOI

2020

Crystal Plasticity Analysis of the Relation between Micro‐Texture and Surface Ridging for a 21%Cr Ferritic Stainless Steel

Chi Zhang, Yujie Xu, Liwen Zhang, Xiaoguang Zhou

steel research international

DOI

2019

冷却工艺参数对海洋工程用H型钢组织性能的影响

董春宇，赵宪明，周晓光，赵景莉

《东北大学学报(自然科学版)》

2019

Comparisons of Different Data-Driven Modeling Techniques for Predicting Tensile Strength of X70 Pipeline Steels

Siwei Wu, Jia-kuan Ren, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu, Jian Yang

Transactions of the Indian Institute of Metals

DOI

2018

元代以前皖江流域佛教发展的时空特征及其原因初探——以寺院为中心

罗冰，周晓光

《江汉论坛》，No. 6

下载原文

2018

Ti微合金化汽车大梁钢510L的组织性能

陈其源，周晓光，刘振宇，吴思炜

《东北大学学报(自然科学版)》

2018

Ti微合金化汽车大梁钢510L动态再结晶行为

周晓光，陈其源，刘振宇，吴思炜

《东北大学学报(自然科学版)》

2018

Optimal design of hot rolling process for C-Mn steel by combining industrial data-driven model and multi-objective optimization algorithm

Siwei Wu, Xiaoguang Zhou, Jia-kuang Ren, Guangming Cao, Zhenyu Liu, Shi Nai-an

Journal of Iron and Steel Research International

DOI

2018

High‐Dimensional Data‐Driven Optimal Design for Hot Strip Rolling of Microalloyed Steel

Siwei Wu, Xiaoguang Zhou, Guangming Cao, Naian Shi, Zhenyu Liu

steel research international

DOI

2017

Ti微合金化Q390高强钢热变形行为研究

周晓光，郭洪河，蒋小冬，刘振宇

《东北大学学报(自然科学版)》

2017

Precipitation behavior of Ti in high strength steels

Siwei Wu, Zhenyu Liu, Xiaoguang Zhou, Hao Chun Yang, Guodong Wang

Journal of Central South University

DOI

2017

Development of Constitutive Models for Extrapolative Prediction of Nb–Ti Micro Alloyed Steel

Siwei Wu, Xiaoguang Zhou, Qiyuan Chen, Jia-kuan Ren, Guangming Cao, Zhenyu Liu

steel research international

DOI

2017

High Dimensional Data-driven Optimal Design for Hot Strip Rolling of C–Mn Steels

Siwei Wu, Guangming Cao, Xiaoguang Zhou, Naian Shi, Zhenyu Liu

ISIJ International

DOI

2016

基于大数据的C-Mn钢数据预处理及神经网络模型

吴思炜，曹光明，周晓光，刘振宇

《东北大学学报(自然科学版)》

2016

The improvement on constitutive modeling of Nb-Ti micro alloyed steel by using intelligent algorithms

Siwei Wu, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu, Guodong Wang

Materials & Design

DOI

2016

Determination of no-recrystallization temperature for a Nb-bearing steel

Hao Yang, Xiaoguang Zhou, Zhenyu Liu, Guodong Wang

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2016

Effect of Cooling Process on Microstructure and Mechanical Properties of X100 Pipeline Steel

Xiaoguang Zhou, Caiyou Zeng, Hao Chun Yang, Liangyu Ma, Zhenyu Liu, Di Wu, Guodong Wang

steel research international

DOI

2015

论明代中后期徽州一条鞭法的实施——以《新安蠹状》为中心

周晓光，王灿

《东北农业大学学报：社会科学版》，No. 1

下载原文

2015

徽州文书的归户整理与宗族史研究

周晓光

《安徽史学》，No. 6

下载原文

2015

论徽州家谱谱传的价值——以《新安商山吴氏宗祠谱传》为例

周晓光

《安徽大学学报(哲学社会科学版)》，No. 6

下载原文

2015

论明清徽州文化的阶段性发展

周晓光

《江汉论坛》，No. 1

下载原文

2015

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Hao Dong Yang, Zhenyu Liu, Xiaoguang Zhou, Guodong Wang

steel research international

DOI

2015

Precipitation behavior of Nb in steel under ultra fast cooling conditions

Xiaoguang Zhou, Meng Wang, Zhenyu Liu, Hao Dong Yang, Di Wu, Guodong Wang

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2014

Upgrade Rolling Based on Ultra Fast Cooling Technology for C-Mn Steel

Xiaoguang Zhou, Zhenyu Liu, Sheng-yong Song, Di Wu, Guodong Wang

Journal of Iron and Steel Research International

DOI

2013

分段冷却模式下热轧双相钢的组织演变及力学性能

利成宁，袁国，周晓光，王国栋

《东北大学学报(自然科学版)》

2013

Precipitation behavior of nanoscale cementite in 0.17% carbon steel during ultra fast cooling (UFC) and thermomechanical treatment (TMT)

Bin Wang, Zhenyu Liu, Xiaoguang Zhou, Guodong Wang, R.D.K. Misra

Materials Science and Engineering A

DOI

2013

Improvement of Hole-Expansion Property for Medium Carbon Steels by Ultra Fast Cooling After Hot Strip Rolling

Bin Wang, Zhenyu Liu, Xiaoguang Zhou, Guodong Wang

Journal of Iron and Steel Research International

DOI

2013

EFFECT OF COOLING PATH ON THE HOLE--EXPANSION PROPERTY OF MEDIUM CARBON STEEL

Bin WANG, Zhenyu Liu, Xiaoguang Zhou, Guodong Wang

Acta Metallurgica Sinica

DOI

2012

超快冷对X80管线钢屈强比的影响

周晓光，卢敏，刘振宇，王国栋

《东北大学学报(自然科学版)》

2012

EH36船板钢的动态再结晶和变形抗力

杨浩，周晓光，刘振宇，王国栋

《东北大学学报(自然科学版)》

2011

超快速冷却对中碳钢组织和性能的影响

王斌，周晓光，刘振宇，王国栋

《东北大学学报(自然科学版)》

2010

明清徽州民间的众存祀会

周晓光

《安徽师范大学学报：社会科学版》，No. 2

下载原文

2010

清代徽州传统学术文化中心地类型分析

周晓光

《安徽史学》，No. 5

下载原文

2010

控制冷却对C-Mn钢力学性能的影响

周晓光，刘振宇，吴迪，王国栋

《东北大学学报(自然科学版)》

2010

Cooling process of high strength and low yield ratio steel plates for buildings

Jian Kang, Zhaodong Wang, Wang Guo-dong, Guo Ding Yuan, Xiaoguang Zhou

Cailiao rechuli xuebao

2010

Study on the Production Process of 780MPa Grade Steel Plates With Low Yield Ratio for High-Rise Buildings

Xiaoguang Zhou

Ironmaking & Steelmaking Processes Products and Applications

2008

TRIP钢在连续冷却过程中的相变行为

朱丽娟，吴迪，赵宪明，周晓光

《东北大学学报(自然科学版)》

2008

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Xiaoguang Zhou, Zhenyu Liu, Xiangqian Yuan, Di Wu, Guodong Wang, Xianghua Liu

Journal of Iron and Steel Research International

DOI

2008

Phase Transformation Behavior of Low-Carbon Si-Mn TRIP Steel During Continuous Cooling

Xiaoguang Zhou

Journal of Northeastern University

2007

利玛窦传播西学的文化适应策略——以《坤舆万国全图》为中心

梅晓娟，周晓光

《安徽师范大学学报：社会科学版》，Vol. 35, No. 6

下载原文

2007

薄板坯连铸连轧过程中的静态软化行为

周晓光，刘振宇，吴迪，王国栋

《东北大学学报(自然科学版)》

2007

薄板坯连轧过程中输送辊对带钢温度场的影响

邓天勇，吴迪，许云波，周晓光

《东北大学学报(自然科学版)》

2006

徽州传统学术文化的传播及其特点

周晓光

《安徽师范大学学报：社会科学版》，Vol. 34, No. 6

下载原文

2006

评《徽州文书》的整理与出版

周晓光

《安徽史学》，No. 5

下载原文

2006

Modeling of Incubation Time for Austenite to Ferrite Phase Transformation

Xiaoguang Zhou, Zhenyu Liu, Di Wu, Wei Wang, Sihai Jiao

Journal of Iron and Steel Research International

DOI

2005

徽州学术文化理念的历史变迁

周晓光

《安徽师范大学学报：社会科学版》，Vol. 33, No. 3

下载原文

2005

中厚板热轧过程中的温度场模拟

周晓光，吴迪，赵忠，王平吉

《东北大学学报(自然科学版)》

2004

试论朱熹在徽州的理学教育活动及其影响

周晓光

《华东师范大学学报(教育科学版)》，Vol. 22, No. 3

下载原文

2003

张海鹏与安徽地方文化史研究

周晓光

《安徽师范大学学报：社会科学版》，Vol. 31, No. 5

下载原文

2003

明代中后期心学在徽州的传播和影响

周晓光

《安徽史学》，No. 5

下载原文

2001

徽州盐商个案研究:《二房赀产清簿》剖析

周晓光

《中国史研究》，No. 1

下载原文

2000

清代徽商与茶叶贸易

周晓光

《安徽师范大学学报：社会科学版》，Vol. 28, No. 3

下载原文

1997

新安理学源流考

周晓光

《中国文化研究》，No. 2

下载原文

1995

再现一代枭雄的完整形象──评余同元著《张献忠》

张海鹏，周晓光

《中国史研究动态》，No. 8

下载原文

1994

论新安理学家程大昌

周晓光

《安徽师范大学学报：社会科学版》，No. 3

下载原文

1989

中国商业史学会第二届年会讨论述要

周晓光

《安徽师范大学学报：社会科学版》，No. 1

下载原文

1988

试论新安理学向皖派经学的转变

周晓光

《安徽师范大学学报：社会科学版》，No. 4

下载原文

精选作品

期刊论文

新时代徽学学科体系的建构

热轧钢材组织性能预测——从物理模型到人机混合智能的发展与展望

多道次变形条件下V-N微合金钢的流变应力模型

Nb微合金钢的流变应力模型

Enhanced Ductility of Ferrite/Bainite Dual‐Phase Steel through the Volume Fraction Increase of Effective Ferrite

Modelling strain-induced precipitation kinetics of Nb (C, N) by symbolic regression machine learning

热轧钢材组织演变和力学性能预测——半经验模型、机器学习到工业大模型

ESP工艺下DP600热轧双相钢铁素体相变模型

Dynamic Deep Learning to Predict Mechanical Properties of High-Strength Low-Alloy Steels

Advanced Lightweight Structural Materials for Automobiles: Properties, Manipulation, and Perspective

社会动员视域下民国旅外徽州人办报实践与乡土社会互动

融合物理冶金学与机器学习的组织性能预测及热轧工艺优化

Machine Learning Complex Interactions Among Recovery, Precipitation, and Recrystallization for Nb Micro-Alloyed Steels

Austenite Grain Growth and its Equation in the Austenitizing Process for 700 MPa Grade High-Strength Steel

Machine learning interphase precipitation behavior of Ti micro-alloyed steel guided by physical metallurgy principle

Physical Metallurgy Guided Machine Learning for Strain‐Induced Precipitation of Nb (C, N) Based on the Orthogonalized Small Data

Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and its Extrapolation to Static Softening Kinetics

The Prediction of the Mechanical Properties for Hot-Rolled Nb Micro-Alloyed Dual-Phase Steel Based on Microstructure Characteristics

税制变革、基层行政与近代徽州茶叶贸易

板带热轧过程耦合机器学习及生产过程多目标优化

The coupling machine learning for microstructural evolution and rolling force during hot strip rolling of steels

晚清茶税与徽茶外销"问题"

徽州谱牒中"溢真"现象的文本解读——以新安东关济阳江氏宗族为中心

ESP工艺下低碳钢奥氏体演变行为

Modeling of the Dynamic Recrystallization of Ti Microalloyed High‐Strength Steel

Hot deformation behavior of C276 superalloy in shifted strain rate compression: Experiments and cellular automaton modelling

Controlled Rolling of X80 Pipeline Steel in the Austenite Recrystallization Temperature Region and Its Effect on the Microstructure and Mechanical properties

Reductions of Intergranular Corrosion Resistance and Wear Resistance in a Ni-Cr-Mo-Based Superalloy by Aging-Treatment-Induced Precipitation

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

明代军解研究

Crystal Plasticity Analysis of the Relation between Micro‐Texture and Surface Ridging for a 21%Cr Ferritic Stainless Steel

冷却工艺参数对海洋工程用H型钢组织性能的影响

Comparisons of Different Data-Driven Modeling Techniques for Predicting Tensile Strength of X70 Pipeline Steels

元代以前皖江流域佛教发展的时空特征及其原因初探——以寺院为中心

Ti微合金化汽车大梁钢510L的组织性能

Ti微合金化汽车大梁钢510L动态再结晶行为

Optimal design of hot rolling process for C-Mn steel by combining industrial data-driven model and multi-objective optimization algorithm

High‐Dimensional Data‐Driven Optimal Design for Hot Strip Rolling of Microalloyed Steel

Ti微合金化Q390高强钢热变形行为研究

Precipitation behavior of Ti in high strength steels

Development of Constitutive Models for Extrapolative Prediction of Nb–Ti Micro Alloyed Steel

High Dimensional Data-driven Optimal Design for Hot Strip Rolling of C–Mn Steels

基于大数据的C-Mn钢数据预处理及神经网络模型

The improvement on constitutive modeling of Nb-Ti micro alloyed steel by using intelligent algorithms

Determination of no-recrystallization temperature for a Nb-bearing steel

Effect of Cooling Process on Microstructure and Mechanical Properties of X100 Pipeline Steel

论明代中后期徽州一条鞭法的实施——以《新安蠹状》为中心

徽州文书的归户整理与宗族史研究

论徽州家谱谱传的价值——以《新安商山吴氏宗祠谱传》为例

论明清徽州文化的阶段性发展

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Precipitation behavior of Nb in steel under ultra fast cooling conditions

Upgrade Rolling Based on Ultra Fast Cooling Technology for C-Mn Steel

分段冷却模式下热轧双相钢的组织演变及力学性能

Precipitation behavior of nanoscale cementite in 0.17% carbon steel during ultra fast cooling (UFC) and thermomechanical treatment (TMT)

Improvement of Hole-Expansion Property for Medium Carbon Steels by Ultra Fast Cooling After Hot Strip Rolling

EFFECT OF COOLING PATH ON THE HOLE--EXPANSION PROPERTY OF MEDIUM CARBON STEEL

超快冷对X80管线钢屈强比的影响

EH36船板钢的动态再结晶和变形抗力

超快速冷却对中碳钢组织和性能的影响

明清徽州民间的众存祀会

清代徽州传统学术文化中心地类型分析

控制冷却对C-Mn钢力学性能的影响

Cooling process of high strength and low yield ratio steel plates for buildings

Study on the Production Process of 780MPa Grade Steel Plates With Low Yield Ratio for High-Rise Buildings

TRIP钢在连续冷却过程中的相变行为

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Phase Transformation Behavior of Low-Carbon Si-Mn TRIP Steel During Continuous Cooling

利玛窦传播西学的文化适应策略——以《坤舆万国全图》为中心

薄板坯连铸连轧过程中的静态软化行为

薄板坯连轧过程中输送辊对带钢温度场的影响

徽州传统学术文化的传播及其特点

评《徽州文书》的整理与出版

Modeling of Incubation Time for Austenite to Ferrite Phase Transformation

徽州学术文化理念的历史变迁

中厚板热轧过程中的温度场模拟

试论朱熹在徽州的理学教育活动及其影响

张海鹏与安徽地方文化史研究