李光强

期刊论文

1. 李斌，李光强（2026）. 转炉低锰冶炼工艺实践. 《冶金信息导刊》.
2. 陈锦鹏，王豪杰，陈枨，田俊羽，李建立，李光强，王强（2026）. H13热作模具钢回火组织演变与力学性能调控. 《特殊钢》.
3. 伍伟，张志成，何英武，张涛，朱诚意，李光强（2026）. GCr15轴承钢精炼过程中钛含量控制及其对TiN类夹杂物特性的影响. 《炼钢》.
4. 赵梓文，贾琪，王强，朱诚意，李光强（2026）. 侧孔不对称型浸入式水口对连铸大方坯内夹杂物空间分布的影响. 《连铸》.DOI
5. 杨潮鑫，赵一将，黄记鹏，马江华，李光强（2026）. K2CO3对高磷鲕状赤铁矿球团氢还原-熔分过程的影响机理. 《武汉科技大学学报》.
6. Zirui Yan, Wan Zheng, Yichi Zhu, Daoyao Liu, Guangqiang Li, Jing Liu (2026). Thermal Deformation Control of Multiphase Composite Inclusions in Bearing Steel Treated by Ce‐Mg Combined Treatment. Steel Research International.DOI
7. Zhengyang Li, Guangqiang Li, 万响亮, Zhi Wang, Deng Xiangtao, Chengyang Hu (2026). Achieving superior toughness in austenitic high-manganese steel at extreme cryogenic temperatures via Al alloying. Journal of Materials Research and Technology.DOI
8. Qi Jia, Haojie Wang, Chang Liu, Zhiyuan Chen, Zhu He, Guangqiang Li, Wen Yan, Qiang Wang (2026). Magnetohydrodynamics flow, heat transfer, and solidification behavior of metallic components produced by innovative ESW-based 3D printing: Numerical analysis and experimental validation. International Journal of Thermal Sciences.DOI
9. H N Zhang, Jinshuai Zhang, Guangqiang Li, Xiangliang Wan, Sujuan Yuan, Wang HC, Mingfeng Hu, Zhinan Yang (2026). Inclusions Control of High-Mn Austenitic Cryogenic Steel Weld Metal Under Lanthanum Action. JOM.DOI
10. Ziwen Zhao, Qi Jia, Chang Liu, Zhen Qin, Wen Yan, Guangqiang Li, Qiang Wang (2026). Numerical Investigation of Inclusion‐Induced Stress in Continuously Cast Bloom During Soft Reduction. steel research international.DOI
11. Xiaohang Liu, C S Liu, Ai-Da Xiao, Wen Yan, Guangqiang Li, Zhu He, Qiang Wang (2026). Enhanced MF–GWO–RF algorithm for accurate slag eye area prediction in ladle refining. Journal of Iron and Steel Research International.DOI
12. Wei Wu, Qi Jia, Chang Liu, J T Li, Guangqiang Li, Cheng Chen, Wen Yan, Qiang Wang (2026). Aluminum Transfer Mechanism During 16MnNiV Steel Electroslag Remelting: A Transient 3D Coupled CFD Model and Experimental Validation. Metallurgical and Materials Transactions B.DOI
13. Yi-Jiang Zhao, Guangqiang Li, J Li, Jianghua Ma, Wen Yan, Y H Liu (2026). Preparation of phosphorous-rich iron via hydrogen reduction–melting separation of high-phosphorus oolitic hematite. Journal of Iron and Steel Research International.DOI
14. Yijiang Zhao, Guangqiang Li, Tianzhi Liang, Jianghua Ma, Wen Yan, Yu Liu (2026). Deep Iron-Phosphorus Separation in Hydrogen Reduction-Melting of High-phosphorus Oolitic Hematite. Metallurgical and Materials Transactions B.DOI
15. Zhengyang Li, Xiangliang Wan, Yongjie Zhang, Xiangtao Deng, Guangqiang Li (2026). Cryogenic hydrogen embrittlement of Fe-24Mn-0.5C-4Cr-5Al austenitic steel. Materials Science and Engineering A.DOI
16. Yifan Zhang, Jinshuai Zhang, Guangqiang Li, Xiangliang Wan, Shan Zhang, Mingfeng Hu, Zhinan Yang (2026). Achieving microstructure optimization and microsegregation improvement in high-Mn austenitic cryogenic steel weld metal via lanthanum addition. Materials Characterization.DOI
17. Zhengyang Li, Xiangliang Wan, Xiangtao Deng, Guangqiang Li (2026). Low-temperature hydrogen embrittlement of high manganese austenitic steel weld metal. Welding in the World.DOI
18. Jian-Zhen Zhai, Jun-Jie Huang, Hao-Jie Wang, Yijiang Zhao, Qiang Wang, Guangqiang Li (2026). Influence of solid–liquid multi-phase slag on desulfurization kinetics in secondary refining of silicon steel. Journal of Iron and Steel Research International.DOI
19. Hao-Jie Wang, Yu-Fei Chen, Junyu Tian, Fang-qin Dai, Guangqiang Li, Qiang Wang (2026). Refinement of carbides and improvement of ingot casting in H13 hot-work die steel through rare earth addition via mold-casting suspension: industrial trials and theoretical analysis. Journal of Iron and Steel Research International.DOI
20. Xuanqi Jiang, Deming Xu, Liguo Zhao, Guangqiang Li, Zhen Qin, Wen Yan, Qiang Wang (2026). Pre-rolling effects on microstructural evolution and mechanical properties of hot- and cold-rolled Q&P specimens: an experimental study. Journal of Materials Research and Technology.DOI
21. Chongsheng Ma, Yulong Cao, Zhongxin Zhang, Guangqiang Li, Zheng-Rong Zhao, Pei-Qi Zhou (2026). High-temperature dissolution behavior of carbides in DC53 steel during quenching process. Journal of Iron and Steel Research International.DOI
22. 潘佳，孙中强，刘晓航，李光强，王强（2025）. 基于自适应特征提取的转炉终点预测模型. 《钢铁研究学报》.
23. 黄记鹏，马江华，杨潮鑫，赵一将，刘昱，李光强（2025）. B2O3对高磷鲕状赤铁矿球团氢还原过程的影响. 《钢铁研究学报》.
24. 刘昱，周子丹，伍洋，张蓬朝，田雨丰，李光强（2025）. 转炉钢渣碳化处理的研究进展与展望. 《炼钢》.
25. 张蓬朝，李光强，胡可，朱丽琴，刘畅，刘昱（2025）. 精炼渣对钢中钛含量和洁净度的影响. 《钢铁》.DOI
26. 黄恩浩，曹玉龙，张赛康，马崇圣，张中心，李光强（2025）. DC53/42CrMo双金属复合过程界面组织演变. 《钢铁研究学报》.DOI
27. 刘晓航，潘佳，刘畅，贺铸，李光强，王强（2025）. 基于改进型随机森林算法的转炉终点成分实时预测模型开发. 《铸造技术》.
28. 聂忠赋，代威，贾琪，贺铸，李光强，王强（2025）. 基于POD正交分解和BPNN神经网络的钢包底吹精炼快速预测模型. 《钢铁研究学报》.
29. 张赛康，曹玉龙，张中心，马崇圣，李光强（2025）. DC53/42CrMo双金属复合材料的组织与性能. 《钢铁研究学报》.
30. 胡汉涛，李光强，马志刚，王强，刘昱，刘畅（2025）. RH精炼顶喷脱硫剂颗粒利用率的数值模拟. 《炼钢》.
31. 杨治争，张蓬朝，霍旭东，李光强，汪勇，刘昱（2025）. 温度和气氛对含Ni钢热处理过程氧化动力学和氧化膜特征的影响. 《武汉科技大学学报》.
32. 代威，聂忠赋，王强，李光强，贺铸（2025）. 基于d-POD和LSTM代理模型的复吹转炉速度场预测. 《钢铁研究学报》.
33. 王永康，刘畅，肖爱达，李光强，王强（2025）. 钢包底吹精炼过程渣眼形貌的数值模拟及无量纲化. 《钢铁研究学报》.
34. 李光强，朱诚意，刘畅，郑万（2025）. 钢液二次精炼脱硫的基础与应用进展. 《材料与冶金学报》.DOI
35. 刘晓航，史先菊，许德明，贺铸，李光强，王强（2025）. 基于决策树算法的焦炭CSR和CRI性能预测模型. 《烧结球团》.DOI
36. Shi‐qin Hu, Wan Zheng, Daoyao Liu, Zirui Yan, Guangqiang Li, Jing Liu, Feng Huang (2025). Inclusion Modification and Evolution during Reheating of Ca‐Treated Ti–Al–Mg Deoxidized High‐Strength Low‐Alloy Steels with Two Different Ti/Al Content Ratios. Steel Research International.DOI
37. Daoyao Liu, Wan Zheng, Shi‐qin Hu, Zirui Yan, Rongzhe Hu, Guangqiang Li, Feng Huang, Jing Liu (2025). Improvement of deep hydrogen traps induced by modified inclusions and optimized microstructure in pipeline steel with cerium treatment. International journal of hydrogen energy.DOI
38. Yanhui Hou, Zhi Ni, Guangqiang Li (2025). Effect of Alloy Elements Segregation on Bi Heterogeneous Nucleation and Local Corrosion Activity in 1215MS Steel with Added Bi. Steel Research International.DOI
39. Yichi Zhu, Wan Zheng, Zirui Yan, Daoyao Liu, Guangqiang Li, Jing Liu (2025). High-temperature evolution and deformation behavior of residual modified Al2O3 inclusions in Si-killed and Ce-treated GCr15 bearing steel. Journal of Materials Research and Technology.DOI
40. Libo Wang, Yishan Jiang, Chengyang Hu, Xiangliang Wan, Guangqiang Li (2025). Effect of heat input on microstructure evolution and fracture toughness of interlayer heat affected zone in ultra-high strength steel. Journal of Materials Research and Technology.DOI
41. Shiyi Peng, Yulong Cao, Lu Wang, Longchao Liu, Guangqiang Li (2025). Temperature Distribution and Element Migration of the Bimetallic Ingot’s Interfacial Zone Produced by Liquid–Solid Composite Casting. International Journal of Metalcasting.DOI
42. Yijiang Zhao, Guangqiang Li, Jianghua Ma, Yu Liu (2025). Interfacial reactions between magnesia refractory and hydrogen-reduced pellets of high-phosphorus oolitic hematite during melting. Ceramics International.DOI
43. Pei-qi Zhou, Yulong Cao, Li-mei Tang, Yu-fei Chen, Zhongxin Zhang, Guangqiang Li (2025). Precipitation behavior of carbides in new HWR0 steel for TBM cutter ring. Journal of Iron and Steel Research International.DOI
44. Jianzhen Zhai, Huang Junjie, Yijiang Zhao, Haojie Wang, Qiang Wang, Guangqiang Li (2025). Influence of slag composition on desulfurization and cleanliness of silicon steel. Journal of Materials Research and Technology.DOI
45. Zekun Xu, Yanhui Hou, Guangqiang Li (2025). Carbon's dual function in phase transformation and defect repair in FeCoCrNiAlTi high-entropy alloy coating. Carbon.DOI
46. Zhenjia Yang, Xin Chen, Zigui Luo, Qi Jin, Jian Wang, Zhaoyang Wu, Guangqiang Li, Xi’an Fan (2025). Design of 2D/2D heterostructures composed of flaky Fe powders and h-BN nanosheets for enhanced Fe SMCs. Journal of Alloys and Compounds.DOI
47. Yanhui Hou, Yangyao Huang, Guangqiang Li (2025). Mechanisms of core-shell construction, interface optimization, and energy level reconstruction for hydrogen embrittlement resistance of yttrium modified X80 pipeline steel. International Journal of Hydrogen Energy.DOI
48. Ke Hu, Guangqiang Li, Ruifeng Xu, Liqin Zhu, Yu Liu (2025). Dissolution behavior of Al2O3 in CaF2-CaO-Al2O3-La2O3 slag and interface characteristics. Ceramics International.DOI
49. Jianglong Chen, Yanhui Hou, Guangqiang Li (2025). Synergistic regulation of hydrogen trapping-diffusion at grain boundaries and interfacial hydrogen resistance in La₂O₃/Y-doped Cr₂O₃-based coatings. Surface and Coatings Technology.DOI
50. Zhe Chen, Wen Yan, Hao Li, Zun Xia, Guangqiang Li, Nan Li, Jinlong Yang (2025). Improved purification performance on molten steel of Al2O3-C based foam filter enhanced by microporous corundum-spinel powder. Ceramics International.DOI
51. Peiwang Liu, Yunming Gao, Qiang Wang, Guangqiang Li (2025). Effect of Applied Voltage on Wetting Behavior between CaO–SiO2–Al2O3(–MgO) Slag and Pt Substrate. Metallurgical and Materials Transactions B.DOI
52. Zekun Xu, Yanhui Hou, Guangqiang Li (2025). Identification of an (AlNi2)@(YNi3+Cr2O3+Hf) heterogeneous nano core–shell structure and triple oxide barrier in enhancing thermal stability in Fe18Co18Cr18Ni36Al9Y0.5Hf0.5 high-entropy coatings. Journal of Rare Earths.DOI
53. Xi’an Fan, Qi Jin, Zhenjia Yang, Wei Wu, Guangqiang Li, Zigui Luo (2025). High permeability and low magnetic loss of Fe–Si/BN soft magnetic composites with layered structure. Journal of Materials Science.DOI
54. Zhi Wang, Chengyang Hu, Hangyu Dong, Xiangliang Wan, Xiangtao Deng, Rui Ke, Guangqiang Li, Kaiming Wu (2025). Revealing the Synergistic Effects of Grain Refinement and Low Temperature on the Deformation Mechanisms of Cr–Mn–N Austenitic Stainless Steel. Metallurgical and Materials Transactions A.DOI
55. Xiaohang Liu, Yongkang Wang, Chang Liu, Aida Xiao, Guangqiang Li, Zhu He, Qiang Wang (2025). Enhancing Predictive Accuracy of Slag Eye Morphology in Ladle Refining: A Comparative Study of Machine Learning Algorithms. Metallurgical and Materials Transactions B.DOI
56. Haojie Wang, Xuanqi Jiang, Fangqin Dai, Xijie J. Wang, Guangqiang Li, Qiang Wang, Dandan Jiao (2025). Effect of Rare Earth Oxide-Containing Slag on the Formation of Inclusions and Carbides in H13 Tool Steel: Analyses of Slag-Steel Reactions and Their Thermodynamics. Metallurgical and Materials Transactions B.DOI
57. Xi’an Fan, Qi Jin, Zhenjia Yang, Zhaoyang Wu, Jian Wang, Guangqiang Li, Zigui Luo (2025). Effect of annealing temperature on magnetic properties of Fe-Si/BN soft magnetic composites with layered structure. Journal of Materials Science Materials in Electronics.DOI
58. Zhenjia Yang, Zigui Luo, Qi Jin, Jian Wang, Zhaoyang Wu, Guangqiang Li, Xi’an Fan (2025). Microstructure and magnetic properties of layered Fe soft magnetic composites with magnetic insulating layer. Journal of Materials Research and Technology.DOI
59. Wen Yan, Ying Liu, Ying Liu, Jin-wen Song, Guangqiang Li, Yu Liu, Guangqiang Li (2025). Filtration efficiency and purification mechanism of MgO-based ceramic filters on molten steel. Journal of Iron and Steel Research International.DOI
60. Yihui Ma, Yunming Gao, Chang Liu, Qiang Wang, Guangqiang Li (2025). Determination of density and surface tension of CaO-SiO2-FexO molten slag by pendant drop method. Metallurgical Research & Technology.DOI
61. A. Abadías Llamas, Jean‐Pierre Birat, Geoffrey Alan Brooks, Ichiro Daigo, Pietro Guj, R.C. Gupta, Eiki Kasai, Guangqiang Li, Pu Li, Hiroyuki Matsuura, Dong Joon Min, Taichi Murakami, Seiji Nomura, William John Rankin, Markus Andreas Reuter, M. Akbar Rhamdhani, Seshadri Seetharaman, M. Shahabuddin, Hong Yong Sohn, Il Sohn, Koji Tokuda, Shigeru Ueda, Mei Zhang (2025). Contributors. Elsevier eBooks.DOI
62. 张嘉欣，李光强，张蓬朝，田雨丰，刘昱（2024）. 转炉碳磷氧化转折温度的热力学模型. 《炼钢》.
63. 王智慧，吴雷，姜懿珊，张弦，万响亮，李光强，吴开明（2024）. 形变强化和逆相变细晶强化对Fe-18Cr-8Ni钢耐腐蚀性能的影响. 《中国腐蚀与防护学报》.
64. 王强，贾琪，聂忠赋，刘畅，贺铸，李光强（2024）. 连铸过程电磁搅拌近实时预测模型的开发. 《第十二届中国金属学会青年学术年会暨首届〝碳中和〞冶金青年科学家沙龙论文集（一）》.DOI
65. 刘晓航，王肸杰，刘畅，贺铸，李光强，王强（2024）. 基于BP神经网络的钢包渣眼演化行为的预测. 《钢铁研究学报》.
66. 刘昱，侯广亮，田雨丰，张嘉欣，李光强（2024）. 石灰和石灰石在炉渣中溶解脱磷的对比研究. 《钢铁研究学报》.
67. 孟泽，李光强，李腾飞，郑庆，曾斌，刘昱（2024）. Ce对75Cr1钢洁净度、组织与耐点蚀性能的影响. 《金属学报》.
68. 吴德进，王慧智，李光强，杨治争，刘昱（2024）. 微合金化对40Cr25Ni20Si2耐热钢性能影响的研究. 《铸造工程》.
69. 郑晓娜，朱诚意，刘玉龙，朱榕，李光强（2024）. 硫含量对无取向硅钢夹杂物特性及磁性能的影响. 《钢铁研究学报》.
70. 潘胡江，杨新明，李光强，杨治争，霍旭东（2024）. Ti微合金化对高锰钢组织和性能的影响. 《特殊钢》.
71. 曹玉龙，张赛康，汪秀秀，马崇圣，李光强（2024）. 加热温度对高钒高速钢中M2C碳化物分解转变行为的影响. 《特殊钢》.
72. Yan-Hui Hou, Zhi Ni, Guangqiang Li (2024). The Influence of Alloying Elements Segregation on Heterogeneous Nucleation of TiN on Al2O3 and Its Local Corrosion Resistance. Journal of Materials Research and Technology.DOI
73. Yan-Hui Hou, Jiang-Long Chen, Guangqiang Li (2024). Effect of Elements Segregation at α‐Fe/Al2O3 Interface on Microareas Corrosion Activity around Al2O3 Inclusions.DOI
74. Libo Wang, Yishan Jiang, Xiangliang Wan, Ming Zhong, Chengyi Zhu, Guangqiang Li (2024). Probing the synergistic effect Ni and Mo contents on microstructure–toughness relationship in super-high strength steel weld metals. Science and Technology of Welding & Joining.DOI
75. Libo Wang, Xiangliang Wan, Chengyang Hu, Guang Xu, Guangqiang Li (2024). High-temperature confocal laser scanning microscopy analysis of phase transformation of steels: a review. Journal of Iron and Steel Research International.DOI
76. Ru Sheng Lu, Bo Feng, Jing-shuai Wang, Guangqiang Li, Qiang Wang, Haichuan Wang (2024). Effects of slag and deoxidizers on recovery of Mn from high-sulfur electrolytic manganese metal scrap. Journal of Iron and Steel Research International.DOI
77. Yu Liu, Liqin Zhu, Pengzhao Zhang, Ke Hu, Guangqiang Li, Xijie J. Wang (2024). Compositional design of slag for homogenized rare earth treatment by slag-steel interaction under vacuum. Vacuum.DOI
78. Zhi-Zheng Yang, Pengzhao Zhang, Xudong Huo, Guangqiang Li, Yu Liu (2024). Oxidation Kinetics and Oxide Scale Characteristics of Ni‐Containing Steel at High Temperature under Air. steel research international.DOI
79. Jinshuai Zhang, Guangqiang Li, Xiangliang Wan, Honghong Wang, Yulong Cao, Mingfeng Hu (2024). Microstructure Evolution and Cryogenic Impact Toughness Changes in Ce‐Containing Novel Cryogenic High‐Mn Austenitic Steel Weld Metals under Different Heat Inputs. steel research international.DOI
80. Zhenjia Yang, Zigui Luo, Qi Jin, Xi’an Fan, Zhaoyang Wu, Jian Wang, Guangqiang Li (2024). A comparative study on the lamella effect and properties of atomized iron powder and reduced iron powder in Fe-based soft magnetic composites. Materials Science and Engineering B.DOI
81. Haojie Wang, Xuanqi Jiang, Xijie J. Wang, Guangqiang Li, Zhiyuan Chen, Fangqin Dai, Qiang Wang (2024). Investigation into Recycling of Iron Oxide Scale on H13 Steel by Low‐Temperature Carbothermal Reduction Method. steel research international.DOI
82. Yijiang Zhao, Jianghua Ma, Chaoxin Yang, Jipeng Huang, Yu Liu, He Zhu, Guangqiang Li (2024). Dephosphorization study on hydrogen reduction-melting separation of high-phosphorus oolitic hematite. Journal of Materials Research and Technology.DOI
83. Peiwang Liu, Yunming Gao, Xiaohang Liu, Qiang Wang, Guangqiang Li (2024). Effect of Applied Voltage on Melting and Wetting Behaviors of CaO-SiO2-MgO-Al2O3 slag on Alumina Substrate. Metals and Materials International.DOI
84. Pengzhao Zhang, Xudong Huo, Yijiang Zhao, Guangqiang Li, Xijie J. Wang, Yu Liu (2024). Comparative study on the cleanliness and compositional change of alloy steels processed by electroslag remelting and vacuum arc remelting. Ironmaking & Steelmaking Processes Products and Applications.DOI
85. Pengzhao Zhang, Ze Meng, Guangqiang Li, Chang Liu, Xijie J. Wang, Yu Liu (2024). Industrial Trials on the Cleanliness Improvement, Microstructure Refinement and Performance Enhancement of Rare‐Earth‐Treated 75Cr1 Steel. steel research international.DOI
86. Yihui Ma, Yunming Gao, Chang Liu, Guangqiang Li (2024). Effect of basicity on density, surface tension and structure of CaO-SiO2-Fe O molten slag. Journal of Non-Crystalline Solids.DOI
87. Zigui Luo, Qi Jin, Rui Wang, Zhenjia Yang, Zhaoyang Wu, Guangqiang Li, Xi’an Fan (2024). High-performance FeSiAl/(Al2O3-Ni) soft magnetic composites prepared by in situ synthesis method. Advanced Powder Technology.DOI
88. Yong Wang, Guangqiang Li, Zhan Zhang, Zhizheng Yang, Yan Hu, Yu Liu (2024). High-temperature oxidation behavior and subsurface phase transformation of high-Mn high-Al steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
89. Zigui Luo, Wei Te Wu, Qi Jin, Zhenjia Yang, Guangqiang Li, Yawei Li, Xi’an Fan (2024). Structural evolution mechanism and magnetic properties of soft magnetic composites transformed from FeSiAl/Co3O4 composites. Journal of Alloys and Compounds.DOI
90. Libo Wang, Chengyang Hu, Sibo Li, Xiangliang Wan, Ming Jun Zhong, Feng Hu, Songbo Zhou, Guangqiang Li, Kaiming Wu (2024). Grain Refinement Mechanism in the CGHAZ of Ultra-High-Strength Structural Steel: A Critical Analysis of the Impacts of Prior Austenite Grain and Cooling Rates. JOM.DOI
91. Zirui Yan, Wan Zheng, Huirong Zhang, Guo Zhao, Guangqiang Li, Jing Liu (2024). Aggregation behavior of Ce–Mg–Mn–O–S composite inclusions in silicon-killed bearing steel and their evolution during heat treatment. Journal of Rare Earths.DOI
92. Wangding Peng, Zhe Chen, Wen Yan, Junfeng Chen, Guangqiang Li, Nan Li (2024). Periclase-magnesium aluminate spinel ceramics filter with excellent purification efficiency on molten steel prepared from Mg(OH)2: Effect of fused MgO content. Journal of the European Ceramic Society.DOI
93. Zhe Chen, Wen Yan, Ying Liu, Guangqiang Li, Shaosong Hong, Nan Li (2024). Purification performance on molten steel of novel Al2O3-based ceramic filter prepared from microporous powder and nano-Al2O3 powder. Journal of Iron and Steel Research International.DOI
94. Wenke Liu, Ping Li, Qingwei Qin, Wei Zhao, Hailin Zhang, Yunwu Han, Feijie Wu, Qiang Zhang, Shili Zheng, Guangqiang Li (2024). Waste reduction and high value utilization of jarosite-alunite residue (JAR) produced from the recovery of spent lithium-ion battery. Hydrometallurgy.DOI
95. Wangding Peng, Zhe Chen, Wen Yan, Yu Liu, Guangqiang Li (2024). Impact of functional coatings on microstructure and properties of periclase-magnesium aluminate spinel ceramic filter and its purification capacity on molten steel. Ceramics International.DOI
96. Zekun Xu, Yanhui Hou, Nele Moelans, Guangqiang Li, Shilong Zhou (2024). High-throughput first-principles study on the effect of Ni segregation on the formation of Cr-depleted zone and corrosion resistance of S32205 duplex stainless steels. Journal of Materials Research and Technology.DOI
97. Xiaohang Liu, Qi Jia, Chang Liu, Aida Xiao, Guangqiang Li, Zhu He, Qiang Wang (2024). Metallurgical Mechanism Guided Machine Learning to Predict Slag Entrapment Behavior during Ladle Refining with Bottom Blowing. Metallurgical and Materials Transactions B.DOI
98. Songyuan Liu, Xiangliang Wan, Chengyang Hu, Yongjie Zhang, Rui Ke, Jun Ping Hu, Xiangtao Deng, Guangqiang Li, Kaiming Wu (2024). Probing the impact of grain size distribution on the deformation behavior in fine-grained austenitic stainless steel: A critical analysis of unimodal structure versus bimodal structure. Materials Science and Engineering A.DOI
99. Chang Liu, Guangmei Yang, Chong Wei Tan, Guangqiang Li, Wen Yan, Zhanmin Wang, Qiang Wang (2024). Numerical Understanding on Penetration and Corrosion Behavior of CaO–Al2O3–MeO Slag to Al2O3–MgO Refractory. Metallurgical and Materials Transactions B.DOI
100. Chong Wei Tan, Haojie Wang, Chang Liu, Wen Yan, Guangqiang Li, Qiang Wang (2024). Quantitative Assessment of Microporous MgO Castable Erosion and Corrosion Behaviors in Two Tundish Covering Fluxes. Metallurgical and Materials Transactions B.DOI
101. Yu-feng Tian, Guangqiang Li, Yongqian Li, Yu Liu (2024). Comparison study on hot state modification of converter slag by adding Al2O3 or SiO2. Journal of Iron and Steel Research International.DOI
102. Pengzhao Zhang, Guangqiang Li, Jiaxin Zhang, Xudong Huo, Yu Liu (2024). Effects of refining slag basicity and vacuum treatment on the cleanliness of bearing steel. Vacuum.DOI
103. Yuxin Cao, Ze Meng, Guangqiang Li, Cheng Yuan, Yong Wang, Wen Yan, Ao Huang, Yu Liu (2024). Effect of CeAlO3 refractories on the cleanliness of rare earth treated steel. Ceramics International.DOI
104. Chong Wei Tan, Guangqiang Li, Chang Liu, Aida Xiao, Zhu He, Qiang Wang (2024). Understanding of baffle effect of inserting a filter within a tundish via a water model experiment and numerical simulation. Metallurgical Research & Technology.DOI
105. Yigui Lao, Yunming Gao, Qiang Wang, Guangqiang Li (2024). Investigation on surface tension of CaF2–CaO–SiO2 (–MgO–Al2O3) melts. Metallurgical Research & Technology.DOI
106. 李斯博，万响亮，董志超，胡锋，周松波，杨叠，李光强，吴开明（2023）. 线能量对超高强度海工钢热影响区组织演变与韧性的影响. 《材料热处理学报》.
107. 胡明峰，李光强，张金帅，王红鸿，万响亮，曹玉龙（2023）. La含量对高锰奥氏体钢焊缝金属微观组织及力学性能的影响. 《武汉科技大学学报》.
108. 赵一将，李光强，孟泽，王肸杰，赵睿，刘昱（2023）. 不同铝含量的脱氧剂对钢液洁净度的影响. 《钢铁》.
109. 程远遥，赵刚，许德明，毛新平，李光强（2023）. 奥氏体化温度对Si-Mn钢热轧板淬火-配分处理后显微组织和力学性能的影响. 《金属学报》.
110. 李嘉维，李光强，曹玉龙，马崇圣（2023）. 电渣熔焊制备不锈钢/碳钢复合板的组织与性能研究. 《武汉科技大学学报》.
111. 吴志豪，贺铸，谭方关，肖爱达，李光强，王强（2023）. 基于神经网络的LF精炼炉炉衬蚀损预测模型. 《钢铁研究学报》.
112. 易礼伟，田雨丰，刘畅，贺铸，李光强，王强（2023）. 顶底复吹转炉石灰溶解行为的数值模拟. 《钢铁研究学报》.
113. 肖颖，朱诚意，刘玉龙，高洋，郭小龙，李光强（2023）. Nb含量对取向硅钢抑制剂析出行为和组织演变的影响. 《武汉科技大学学报》.
114. 孟泽，李光强，赵一将，郑庆，曾斌，刘昱（2023）. La-Ce处理对75Cr1钢夹杂物和耐蚀性影响的工业试验. 《钢铁》.
115. 张惠荣，郑万，刘鹏，张文文，李光强，刘静（2023）. 稀土及热处理对GCr15轴承钢中夹杂物特征的影响. 《炼钢》.
116. 陈江龙，侯延辉，李光强（2023）. 钢中Al 2 O 3 夹杂物周围合金元素偏聚对点蚀的影响. 《中国稀土学会2023学术年会、第十五届中国包头·稀土产业论坛摘要集》.DOI
117. 侯延辉，周世龙，李光强（2023）. 稀土La在锈层中的赋存状态及其对钢耐蚀性影响机理的研究. 《中国稀土学会2023学术年会、第十五届中国包头·稀土产业论坛摘要集》.DOI
118. 史先菊，李光强，刘畅，李军，赵毓伟，王强（2023）. 烧结用铁矿粉制粒性能影响因素的试验研究. 《烧结球团》.
119. Yanhui Hou, Ze-kun Xu, Shi-Long Zhou, Guangqiang Li (2023). Atomic-scale mechanism of effect of co-separation of elements at interface of ferrite and austenite on Cr-depleted zone of duplex stainless steel. Journal of Iron and Steel Research International.DOI
120. Ying Liu, Wen Yan, Zhe Chen, Junfeng Chen, Yu Liu, Guangqiang Li (2023). Preparation of high performance MgO ceramic filter and its interaction with molten steel: Effect of porous MgO powder. Journal of the European Ceramic Society.DOI
121. Qinyu He, Chengyi Zhu, Yulong Liu, Wen Yan, Xiangliang Wan, Guangqiang Li (2023). Effect of annealing temperature on the properties of phosphorus micro-alloyed non-oriented electrical steels. Journal of Materials Research and Technology.DOI
122. Yigui Lao, Yunming Gao, Cheng Yuan, Guangqiang Li (2023). Effect of Al Content in Steel on Interfacial Interaction between Molten Steel and MgO Substrate. steel research international.DOI
123. Ying Liu, Wen Yan, Zhe Chen, Junjie Yan, Qiang Wang, Guangqiang Li (2023). Effect of sintering atmosphere on microstructures and properties of synthesized microporous MgO refractory raw material. International Journal of Applied Ceramic Technology.DOI
124. Xijie J. Wang, Guangqiang Li, Yufei Chen, Qiang Wang, Yu Liu (2023). Industrial Trials on Preparation of Cerium‐Treated H13 Steel by Electroslag Remelting with Cerium‐Oxide Containing Slag. steel research international.DOI
125. Yanhui Hou, Zekun Xu, Guangqiang Li (2023). Effect of trace boron on corrosion resistance of rust layer of high-strength low-alloy steel in 3.5 wt.% NaCl solution. Journal of Iron and Steel Research International.DOI
126. Wendy Zhang, Wan Zheng, Guangqiang Li, Zirui Yan, Wen Yan, Zhenjiang Liang, Peng Liu (2023). Removal behavior of Al–Ti–O inclusions in aluminum deoxidized molten steel containing titanium by microporous magnesium foam ceramic filters. Journal of Materials Research and Technology.DOI
127. Qiang Wang, Chang Liu, Gong Cheng, Changgui Cheng, Zhu He, Guangqiang Li (2023). Numerical Understanding of Electromagnetic Influence on Fluctuation Behavior at Slag/Steel Interface During LF Refining Process. Metallurgical and Materials Transactions B.DOI
128. Wen Yan, Zhe Chen, Guangqiang Li, Shaosong Hong, Nan Li (2023). Preparation and enhanced mechanical properties of novel Al 2 O 3 ‐C ceramic filter reinforced by microporous powder and SiC whiskers. Journal of the American Ceramic Society.DOI
129. Ze Meng, Guangqiang Li, Cheng Yuan, Yijiang Zhao, Qing Zheng, Bin Zeng, Yu Liu (2023). Comparative study on interaction between rare earth oxide refractories and rare earth treated steel. Journal of Iron and Steel Research International.DOI
130. Qiang Wang, Chong Wei Tan, Chang Liu, Zhiyuan Chen, Wen Yan, Qiang Wang, Guangqiang Li (2023). Elaboration of A Coupled Numerical Model for Predicting Magnesia Refractory Damage Behavior in High-Temperature Reactor. Metallurgical and Materials Transactions B.DOI
131. Zigui Luo, Zhenjia Yang, Shangwei Jiang, Wei Wu, Guangqiang Li, Xi’an Fan (2023). High-performance Fe–Si soft magnetic composites with controllable silicate/nano-Fe composite coating. Journal of Materials Research and Technology.DOI
132. Chengjie He, Xiaoxiong Zhu, Chengyang Hu, Hangyu Dong, Xiangliang Wan, Enyong Liu, Guangqiang Li, Kaiming Wu (2023). Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off. JOM.DOI
133. Cheng Yuan, Guangqiang Li, Ze Meng, Yong shun Zou, Ao Huang, Wen Yan, Yu Liu (2023). Effect of Rare‐Earth Oxides Containing Refractories on the Cleanliness of Al‐Killed Steels. steel research international.DOI
134. Wangding Peng, Zhe Chen, Wen Yan, Junfeng Chen, Guangqiang Li, Yawei Li (2023). Microstructure and properties of ceramic filter containing porous MgO coating and its filtration of Al2O3 inclusions in molten steel. Ceramics International.DOI
135. Zhe Chen, Wen Yan, Guangqiang Li, Shaosong Hong, Nan Li (2023). Enhanced mechanical properties of novel Al2O3-based ceramic filter by using microporous corundum-spinel and nano-Al2O3 powders. Journal of the European Ceramic Society.DOI
136. Chengyang Hu, Chengjie He, Xiaoxiong Zhu, Hangyu Dong, Xiangliang Wan, Guangqiang Li, Kaiming Wu (2023). The significant role of bimodal lamellar heterostructure for Lüders deformation and TRIP effect in 18Cr–8Ni austenitic stainless steel. Materials Science and Engineering A.DOI
137. Rong Xia Zhu, Chengyi Zhu, Shuang Wu, Xiangliang Wan, Guangqiang Li (2023). Effect of CeO2 on microstructure and properties of Ni–Co-based coatings. Journal of Materials Research and Technology.DOI
138. Jingdong Huang, Guangqiang Li, Xiao Xiang Yang (2023). Correction: Chlorination of ZnFe2O4 by Molten MgCl2: Effect of Adding CaCl2. Journal of Sustainable Metallurgy.DOI
139. Yijiang Zhao, Guangqiang Li, Yang Wu, Cheng Yuan, Ze Meng, Xiaoxuan Deng, Yu Liu (2023). Corrosion behavior of Al2O3–C bricks in MnO-containing mold slag. Journal of Iron and Steel Research International.DOI
140. Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li, Liwang Wang, Ding Chen (2023). Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: The role of microporous magnesia. Materials & Design.DOI
141. Guang-mei Yang, Cheng Yuan, Chang Liu, Qiang Wang, Guangqiang Li, Yongshun Zou, Ao Huang (2023). Effect of MgO–Cr2O3 and MgO–MgAl2O4-based refractories on refractory–steel interface reaction and cleanliness of pipeline steel. Journal of Iron and Steel Research International.DOI
142. Jingdong Huang, Guangqiang Li, Xiao Xiang Yang (2023). Chlorination of ZnFe2O4 by Molten MgCl2: Effect of Adding CaCl2. Journal of Sustainable Metallurgy.DOI
143. Pengzhao Zhang, Guangqiang Li, Chengyi Zhu, Zhicheng Zhang, Yu Liu (2023). Thermodynamics on compositional design of slag for the Ti content control in bearing steel. Journal of Materials Research and Technology.DOI
144. Jiawei Li, Yulong Cao, Guangqiang Li, Chongsheng Ma, Zhouhua Jiang (2023). Study on the Interface of Stainless Steel/Carbon Steel Clad Plate Produced by Electroslag Fusion Welding. JOM.DOI
145. Ru Sheng Lu, Ran-ran Yu, Guangqiang Li, Yu Liu, Qiang Wang, Haichuan Wang (2023). Desulfurization of rejected electrolytic manganese metal by electroslag remelting furnace with a water-cooled electrode. Journal of Iron and Steel Research International.DOI
146. Chang Liu, Yu-feng Tian, Yongli Xiao, Yongqian Li, Yang Li, Guangqiang Li, Qiang Wang (2023). Numerical investigation of basic oxygen furnace slag modification with gas bottom-blowing and SiO2 modifier. Journal of Iron and Steel Research International.DOI
147. Yanhui Hou, Zekun Xu, Gang Xiong, Guangqiang Li (2023). Effects of Cu Content on Inclusions and Pitting Corrosion in S32205 Duplex Stainless Steel. steel research international.DOI
148. Ying Liu, Wen Yan, Yu Liu, Qiang Wang, Guangqiang Li, Nan Li (2023). Effect of α-Al2O3 content on microstructures, mechanical properties and purification efficiency on molten steel of MgO-based filters. Journal of the European Ceramic Society.DOI
149. Yunming Gao, Hucheng Zhang, Peiwang Liu, Qiang Wang, Guangqiang Li (2023). Effect of MgO on wetting and corrosion behaviour of corundum substrate by CaO–SiO 2 –MgO (–Al 2 O 3 ) slags. Ironmaking & Steelmaking Processes Products and Applications.DOI
150. Peng Liu, Wan Zheng, Guangqiang Li, Huirong Zhang, Wendy Zhang, Chunfeng Wang (2023). Hot Ductility Evolution Mechanism of Titanium‐Bearing Microalloyed Steels. steel research international.DOI
151. Junjie Yan, Wen Yan, Yajie Dai, Guangqiang Li, Xiao Wang, Yucheng Yin (2023). Evaluation of fracture behavior of lightweight magnesia‐based refractories via wedge splitting test along with acoustic emission detection. International Journal of Applied Ceramic Technology.DOI
152. Shaofei Li, Huajian Zhang, Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li, Liwang Wang (2023). Microstructural evolution during H2 corrosion of Al2O3–SiO2 based refractory aggregates. Ceramics International.DOI
153. Chang Liu, Kaiyu Peng, Qiang Wang, Guangqiang Li, Jujin Wang, Lifeng Zhang (2023). CFD Investigation of Melting Behaviors of Two Alloy Particles During Multiphase Vacuum Refining Process. Metallurgical and Materials Transactions B.DOI
154. Yu Liu, Pengzhao Zhang, Yufeng Tian, Yang Wu, Jiangping Rao, Zhi-Zheng Yang, Guangqiang Li (2023). Role of self-disintegrating effect produced by decomposition of limestone core on accelerating dissolution of lime in CaO–SiO 2 –FeO x slag. Ironmaking & Steelmaking Processes Products and Applications.DOI
155. Xiuyi Liu, Zhe Chen, Wen Yan, Jingran Wang, Sanbao Ma, Guangqiang Li (2023). A comparative study on lightweight and dense periclase-magnesium aluminate spinel refractories from industrial preparation. Journal of Alloys and Compounds.DOI
156. Zheng Han, Wen Yan, Junjie Yan, Zhe Chen, Xiao Wang, Guangqiang Li (2023). Microstructures and properties of novel lightweight refractory aggregates with microporous MgO@MgAl2O4 core-shell structures. Journal of the European Ceramic Society.DOI
157. Chong Wei Tan, Chang Liu, Lvping Fu, Wen Yan, Zhiyuan Chen, Guangqiang Li, Qiang Wang (2023). Slag Corrosion Behavior of Novel Lightweight Magnesia Castable in a High-Basicity Slag: Role of Micropores and Nanosized Zirconia. Metallurgical and Materials Transactions B.DOI
158. Xilin Zhang, Yunming Gao, Qiang Wang, Guangqiang Li (2023). Determination of Density and Surface Tension of CaO–SiO2–Al2O3 Molten Slag by Pendant Drop Method. Metallurgical and Materials Transactions B.DOI
159. Chongwen Wang, Wen Yan, Junjie Yan, Zhe Chen, Xiao Wang, Guangqiang Li (2023). Microstructure and strength of microporous MgO refractory aggregates with nano-sized pores. Journal of Asian Ceramic Societies.DOI
160. Libo Wang, Chengyang Hu, Xiangliang Wan, Songbo Zhou, Ran Wei, Chengyi Zhu, Guangqiang Li, Kaiming Wu (2023). Impacts of Nb on grain refinement in a simulated coarse-grained-heat-affected-zone of ultra-high-strength steels. Science and Technology of Welding & Joining.DOI
161. Yufeng Tian, Guangqiang Li, Yongqian Li, Tengfei Li, Cheng Yuan, Yu Liu (2023). Thermodynamics and Kinetics on Hot State Modification of BOF Slag by Adding SiO2. Metallurgical and Materials Transactions B.DOI
162. Tengfei Li, Guangqiang Li, Xijie J. Wang, Xiaoxuan Deng, Yu Liu (2023). Novel method on homogenized La treatment of GCr15 steel by the self-reaction of La2O3 containing slag and steel for vacuum electroslag remelting. Vacuum.DOI
163. Jinshuai Zhang, Guangqiang Li, Honghong Wang, Xiangliang Wan, Mingfeng Hu, Yulong Cao (2023). Achieving superior cryogenic impact toughness and sufficient tensile properties in a novel high-Mn austenitic steel weld metal via cerium addition. Journal of Materials Research and Technology.DOI
164. 陈磊，王德永，王慧华，屈天鹏，黄奥，李光强（2022）. 中间包微孔MgO耐火材料与钢液反应行为. 《钢铁研究学报》.
165. 张金帅，李光强，王红鸿，万响亮，胡明峰（2022）. 含铈超低温高锰钢焊缝金属的夹杂物演变及微观组织调控. 《中国稀土学会2022学术年会、第十四届中国包头·稀土产业论坛摘要集》.DOI
166. 陈牒斌，李光强，张战，黄世辉（2022）. 精炼渣和稀土Ce对Fe-30Mn-10Al-1.1C钢中非金属夹杂物的影响. 《武汉科技大学学报》.
167. 赵峥嵘，曹玉龙，万响亮，李光强（2022）. W3Mo4Cr5V6高速钢中碳化物的高温转变行为. 《武汉科技大学学报》.
168. 常茜萱，谭憧，刘畅，肖爱达，王强，李光强（2022）. 板坯连铸中间包内控流装置优化的物理和数值模拟. 《炼钢》.
169. 饶江平，杨治争，李光强，刘昱，袁纲，肖邦志（2022）. IF钢RH精炼理论研究与工艺优化. 《炼钢》.
170. 田雨丰，李光强，肖永力，刘昱（2022）. 残留CO2对石灰在转炉初渣中溶解的影响. 《钢铁》.
171. 肖颖，刘玉龙，黄罗翼，李光强，鄢文，朱诚意（2022）. 酸溶铝和铌含量对取向硅钢夹杂物特征的影响. 《钢铁研究学报》.
172. 刘畅，谭憧，杨光美，李光强，王强（2022）. CaO-Al 2 O 3 -SiO 2 熔渣对多孔MgO-Al 2 O 3 耐火材料渗透行为的数值模拟研究. 《第十八届全国耐火材料青年学术报告会论文集》.DOI
173. Wendy Zhang, Wan Zheng, Wen Yan, Guangqiang Li (2022). Formation mechanism of interface reaction layer between microporous magnesia refractories and molten steel and its effect on steel cleanliness. Journal of Iron and Steel Research International.DOI
174. Jinshuai Zhang, Guangqiang Li, Honghong Wang, Xiangliang Wan, Mingfeng Hu, Yulong Cao (2022). Evolution of inclusions in novel cryogenic high-Mn austenitic steel weld metal with cerium addition. Science and Technology of Welding & Joining.DOI
175. Jinshuai Zhang, Guangqiang Li, Honghong Wang, Xiangliang Wan, Mingfeng Hu, Yulong Cao (2022). Effect of cerium on microstructure and microsegregation behavior of novel cryogenic high-Mn austenitic steel weld metal. Materials Characterization.DOI
176. Yigui Lao, Guangqiang Li, Yunming Gao, Cheng Yuan (2022). Wetting and interfacial interaction of molten iron on MgO substrate under different oxygen partial pressures. Journal of Materials Research and Technology.DOI
177. Yanzhu Huo, Huazhi Gu, Ao Huang, Beiyue Ma, Liugang Chen, Guangqiang Li, Yawei Li (2022). Characterization and mechanism of dissolution behavior of Al2O3/MgO oxides in molten slags. Journal of Iron and Steel Research International.DOI
178. Qinyu He, Yulong Liu, Chengyi Zhu, Xiaohui Xie, Rong Xia Zhu, Guangqiang Li (2022). Effect of Phosphorus Content on Magnetic and Mechanical Properties of Non-Oriented Electrical Steel. Materials.DOI
179. Jinshuai Zhang, Guangqiang Li, Honghong Wang, Xiangliang Wan, Mingfeng Hu, Qingrun Meng (2022). The effect of non-metallic inclusions in refining microstructure and improving cryogenic toughness of novel high-Mn steel weld metals for LNG tanks. Welding in the World.DOI
180. Yong Wang, Yu Liu, Guangqiang Li, Chengyi Zhu, Yuxin Cao (2022). Effect of atmosphere on oxidation behavior of novel high Mn steel bearing Cr during heat treatment. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
181. Cheng Yuan, Yu Liu, Guangqiang Li, Yongshun Zou, Ao Huang (2022). Interaction between microporous magnesia castable and 38CrMoAl steel. Journal of Iron and Steel Research International.DOI
182. Qianlin Chen, Wen Yan, Junjie Yan, Stefan Schafföner, Zhe Chen, Sanbao Ma, Guangqiang Li (2022). Microstructures and strengths of microporous MgO–Al 2 O 3 ceramics from Al(OH) 3 and calcined magnesite. Journal of the American Ceramic Society.DOI
183. Lei Wu, Chengyang Hu, Rui Ke, Raja Devesh Kumar Misra, Ming Jun Zhong, Guangqiang Li, Deming Xu, Xiangliang Wan, Kaiming Wu (2022). Insights into the Plasticization Mechanism in Different 18Cr–8Ni Austenitic Stainless Steel: Study of the Phase Reverted Structure Versus Cold‐Deformed Structure. steel research international.DOI
184. Yulong Cao, Zhengrong Zhao, Xiangliang Wan, Guangqiang Li, Zhouhua Jiang, Yanwu Dong (2022). Carbide Characteristics of High Vanadium High-speed Steel Manufactured by Electroslag Remelting. ISIJ International.DOI
185. Yanhui Hou, Shilong Zhou, Guangqiang Li, Nele Moelans (2022). Study on the Occurrence State of Lanthanum in Rust Layer and Mechanism of Its Influence on Invasion State of Corrosion Atoms. steel research international.DOI
186. Jinshuai Zhang, Guangqiang Li, Honghong Wang, Xiangliang Wan, Mingfeng Hu, Qingrun Meng (2022). Microstructure, non-metallic inclusions and impact toughness of high-Mn cryogenic steel weld metal. Science and Technology of Welding & Joining.DOI
187. Yang Wu, Guangqiang Li, Fangguan Tan, Yawei Li, He Zhu (2022). Research on creep damage model of high alumina bricks. Ceramics International.DOI
188. Chengyi Zhu, Yulong Liu, Ying Xiao, Wen Yan, Guangqiang Li (2022). A New Review on Inclusion and Precipitate Control in Grain-Oriented Silicon Steels. JOM.DOI
189. Shihui Huang, Guangqiang Li, Zhan Zhang, Qingbiao Tan, Guoliang Zhu (2022). Effect of Cooling Rate on the Grain Morphology and Element Segregation Behavior of Fe-Mn-Al-C Low-Density Steel during Solidification. Processes.DOI
190. Yulong Liu, Chengyi Zhu, Luoyi Huang, Xinyuan Chen, Guangqiang Li (2022). Influence of Inclusions on Magnetic Properties of Al-Killed Non-oriented Silicon Steels. JOM.DOI
191. Yulong Cao, Chongsheng Ma, Zhouhua Jiang, Jiaqi Yan, Guangqiang Li (2022). Element Migration and Diffusion at the Bonding Interface of the Bimetallic Composite Billet Produced by the ESRC Method. Metallurgical and Materials Transactions B.DOI
192. Chang Liu, Aida Xiao, Zhu He, Wen Yan, Guangqiang Li, Qiang Wang (2022). Numerical Investigation on Motion and Removal of Inclusions in Continuous Casting Tundish with Multiorifice Filter. steel research international.DOI
193. Tengfei Li, Guangqiang Li, Yu Liu, Xijie J. Wang, Yufeng Tian (2022). Effect of MgO on the fluoride vaporization and crystallization of CaF2–CaO–Al2O3–(MgO) slag for vacuum electroslag remelting. Journal of Thermal Analysis and Calorimetry.DOI
194. Chang Liu, Guangqiang Li, Lifeng Zhang, Qiang Wang, Qiang Wang (2022). A Three-Dimensional Comprehensive Numerical Model of Ion Transport during Electro-Refining Process for Scrap-Metal Recycling. Materials.DOI
195. Hiroyuki Matsuura, Xiao Xiang Yang, Guangqiang Li, Zhangfu Yuan, Fumitaka Tsukihashi (2022). Recycling of ironmaking and steelmaking slags in Japan and China. International Journal of Minerals Metallurgy and Materials.DOI
196. Yu Liu, Jiangping Rao, Guangqiang Li, Zhan Zhang, Jianfeng Wang, Tingliang Dong (2022). Dissolution of Al2O3–C bricks in 45 wt% CaO-45 wt% SiO2-x wt% CaF2-(10-x) wt% Na2O slag. Ceramics International.DOI
197. Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li, Liwang Wang, Ding Chen (2022). Pore evolution of microporous magnesia aggregates with the introduction of nano-sized MgO. Ceramics International.DOI
198. Zhengrong Zhao, Yulong Cao, Xiangliang Wan, Jiawei Li, Guangqiang Li (2022). Effect of Cooling Rate on Carbide Characteristics of the High Vanadium High-speed Steel. ISIJ International.DOI
199. Qiang Wang, Shuyuan Jia, Fangguan Tan, Guangqiang Li, Degang Ouyang, Shanhe Zhu, Wei Hua Sun, He Zhu (2022). Response to “Discussion on “Numerical Study of Desulphurization Behavior During Kanbara Reactor Hot Metal Treatment””. Metallurgical and Materials Transactions B.DOI
200. Qiang Wang, Chang Liu, Liping Pan, Zhu He, Guangqiang Li, Qiang Wang (2022). Numerical Understanding on Refractory Flow-Induced Erosion and Reaction-Induced Corrosion Patterns in Ladle Refining Process. Metallurgical and Materials Transactions B.DOI
201. Xianju Shi, Chengzhi Li, Qiang Wang, Guangqiang Li, Zhang We, Zhengliang Xue (2022). Numerical study of the dynamic behaviour of iron ore particles during wet granulation process using discrete element method. Powder Technology.DOI
202. Yigui Lao, Guangqiang Li, Yunming Gao, Cheng Yuan (2022). Wetting and corrosion behavior of MgO substrates by CaO–Al2O3–SiO2–(MgO) molten slags. Ceramics International.DOI
203. Yufeng Tian, Yu Liu, Guangqiang Li, Yongqian Li, Zhan Zhang, Chong Wei Tan (2022). Dissolution behavior of partially calcined limestone with residual CO2 in converter slag. Journal of Materials Research and Technology.DOI
204. Yulong Cao, Zhengrong Zhao, Chongsheng Ma, Guangqiang Li (2022). Precipitation Behavior and Elemental Distribution of MC Carbides in High Carbon and Vanadium High-Speed Steel. Journal of Materials Engineering and Performance.DOI
205. 牛辰睿，李光强，曹玉龙，李嘉维（2021）. 高速钢/42CrMo复合铸锭界面结构与性能研究. 《武汉科技大学学报》.
206. 汪勇，黄罗翼，李光强，朱诚意（2021）. Nb含量对取向硅钢第二相粒子和性能的影响. 《武汉科技大学学报》.
207. 郑万，寇锦荣，陈小龙，陈利，周从锐，邓琛，李光强（2021）. 高速连铸结晶器卷渣缺陷的特征、演变及控制. 《炼钢》.
208. 王强，王芳，贺铸，李光强，李宝宽（2021）. 电渣重熔精炼过程数值模拟研究进展. 《钢铁研究学报》.DOI
209. 史先菊，王强，李光强，刘代飞，李军（2021）. 熔剂颗粒在烧结过程中的特征演变及影响. 《钢铁》.DOI
210. 王国伟，郑万，陈小龙，周从锐，熊良友，李光强（2021）. 连铸连轧卷板边部线状缺陷的形成机制. 《钢铁研究学报》.DOI
211. 杨恒，吴开明，王宇航，胡锋，侯廷平，李光强（2021）. 高强度海工钢中腐蚀活性夹杂物与耐海水腐蚀性能研究. 《钢铁研究学报》.
212. 梁震江，郑万，王君驰，王强，李光强（2021）. 过滤控流中间包流场及夹杂物去除的数值模拟. 《连铸》.DOI
213. 解晓辉，刘玉龙，李光强，陈新元，朱诚意（2021）. Ce-La合金化处理对取向硅钢夹杂物特征的影响. 《钢铁》.
214. Yunming Gao, Hucheng Zhang, Qiang Wang, Guangqiang Li (2021). Effect of applied voltage on wetting and corrosion of corundum refractory by CaO–SiO2–MgO molten slag. Ceramics International.DOI
215. Yuxin Cao, Xiangliang Wan, Feng Zhou, Yong Wang, Xinbin Liu, Kaiming Wu, Guangqiang Li (2021). Effect of Ce Content on Microstructure-Toughness Relationship in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels. Metals.DOI
216. Tengfei Li, Guangqiang Li, Zhan Zhang, Yu Liu, Xijie J. Wang (2021). Fluoride vaporization and crystallization of CaF2–CaO–Al2O3–(La2O3) slag for vacuum electroslag remelting. Vacuum.DOI
217. Junjie Yan, Wen Yan, Zhe Chen, Mithun Nath, Ning Liao, Guangqiang Li, Qiang Wang (2021). A strategy for controlling microstructure and mechanical properties of microporous spinel (MgAl2O4) aggregates from magnesite and Al(OH)3. Journal of Alloys and Compounds.DOI
218. Cheng Yuan, Yu Liu, Guangqiang Li, Yufeng Tian, Chong Wei Tan, Yongshun Zou, Ao Huang, Yawei Li (2021). Comparison study on effect of nano-sized Al2O3 addition on the corrosion resistance of microporous magnesia aggregates against tundish slag. Ceramics International.DOI
219. Ru Sheng Lu, Guangqiang Li, Chang Liu, Yunming Gao, Yufei Chen, Qiang Wang (2021). Effects of slag composition and additive type on desulfurization of rejected electrolytic manganese metal scrap by Na2O-containing electroslag. Journal of Iron and Steel Research International.DOI
220. Ru Sheng Lu, Guangqiang Li, Jie Li, Yufei Chen, Yunming Gao, Qiang Wang (2021). Effects of CaO Content and Magnesium Additive in Electroslag on Desulfurization of Rejected Electrolytic Manganese Metal Scrap. Metallurgical and Materials Transactions B.DOI
221. Cheng Yuan, Yu Liu, Guangqiang Li, Yongshun Zou, Ao Huang (2021). Adsorption mechanism of oxide inclusions by microporous magnesia aggregates in tundish. Ceramics International.DOI
222. Lijuan Su, Jifang Xu, Guangqiang Li, Chengyi Zhu (2021). Influences of deoxidation and VOD slag on the behavior of inclusions in Fe–21Cr ferrite stainless steel. Journal of Materials Research and Technology.DOI
223. Yulong Cao, Jiawei Li, Guangqiang Li, Yanwu Dong, Zhouhua Jiang (2021). Effect of Conductive Circuits on Bonding Quality of Bimetallic Composite Roll Produced by Electroslag Remelting Cladding. JOM.DOI
224. Yaping Cheng, Yu Zhang, Yuanyuan Li, Junfeng Chen, Junli Xiao, Yaowu Wei, Guangping Liu, Guangqiang Li, Shaowei Zhang, Nan Li (2021). Degradation behaviors of cement-free corundum-spinel castables in Ruhrstahl Heraeus refining ladle: Role of infiltrated steel. Ceramics International.DOI
225. Qiang Wang, Fangguan Tan, Zhu He, Guangqiang Li, Jianli Li (2021). Quantitative Evaluation of Slag Corrosion on MgO-C Refractory by Experimental and Numerical Simulation. JOM.DOI
226. Yongli Xiao, Yufeng Tian, Qiang Wang, Guangqiang Li (2021). Numerical Investigation of Lime Particle Motion in Steelmaking BOF Process. JOM.DOI
227. Qiang Wang, Chong Wei Tan, Ao Huang, Wen Yan, Huazhi Gu, Zhu He, Guangqiang Li (2021). Quantitative Characterization of Flow-Induced Erosion of Tundish Refractory Lining via Water Model Experiment and Numerical Simulation. Metallurgical and Materials Transactions B.DOI
228. Yong Wang, Guangqiang Li, Chengyi Zhu, Yang Gao, Yulong Liu, Yu Liu (2021). Role of Nb-bearing inhibitors in grain-oriented silicon steel manufactured by low-temperature slab reheating process. Ironmaking & Steelmaking Processes Products and Applications.DOI
229. Yulong Cao, Yanwu Dong, Guangqiang Li, Zhouhua Jiang, Zhengrong Zhao (2021). Solid-state phase transformation of ductile cast iron during electroslag remelting cladding. International Journal of Cast Metals Research.DOI
230. Junfeng Chen, Yaping Cheng, Yuanyuan Li, Junli Xiao, Yu Zhang, Guangping Liu, Yaowu Wei, Guangqiang Li, Shaowei Zhang, Nan Li (2021). Formation of ferrospinel layer at the corroded interface between Al 2 O 3 ‐spinel refractory and molten steel in RH refining ladle. Journal of the American Ceramic Society.DOI
231. Yulong Cao, Yanwu Dong, Zhouhua Jiang, Guangqiang Li, Zhengrong Zhao (2021). Characteristics of High Speed Steel/ductile Cast Iron Composite Roll Manufactured by Electroslag Remelting Cladding. ISIJ International.DOI
232. Wangding Peng, Zhe Chen, Wen Yan, Stefan Schafföner, Guangqiang Li, Yawei Li, Cangjian Jia (2021). Advanced lightweight periclase-magnesium aluminate spinel refractories with high mechanical properties and high corrosion resistance. Construction and Building Materials.DOI
233. Chong Wei Tan, Yu Liu, Guangqiang Li, Cheng Yuan, Yufeng Tian, Yongshun Zou, Ao Huang (2021). Corrosion Behavior of Lightweight MgO in High Basicity Tundish Slag. steel research international.DOI
234. Xijie J. Wang, Guangqiang Li, Yu Liu, Fang Wang, Qiang Wang (2021). Cerium Addition Effect on Modification of Inclusions, Primary Carbides and Microstructure Refinement of H13 Die Steel. ISIJ International.DOI
235. Ru Sheng Lu, Guangqiang Li, Yunming Gao, Chengbin Shi, Qiang Wang (2021). Investigation on Desulfurization of Rejected Electrolytic Manganese Metal Scrap: Experiment and Mathematical Modeling. Metallurgical and Materials Transactions B.DOI
236. Qiang Wang, Chong Wei Tan, Ao Huang, Wen Yan, Huazhi Gu, Zhu He, Guangqiang Li (2021). Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish. Metallurgical and Materials Transactions B.DOI
237. Qiang Wang, Shuyuan Jia, Fangguan Tan, Guangqiang Li, Degang Ouyang, Shanhe Zhu, Wei Hua Sun, Zhu He (2021). Numerical Study on Desulfurization Behavior During Kanbara Reactor Hot Metal Treatment. Metallurgical and Materials Transactions B.DOI
238. Yuxin Cao, Xiangliang Wan, Feng Zhou, Yu Shen, Yu Liu, Guangqiang Li, Kaiming Wu (2021). Impact of Mo content on the microstructure– toughness relationship in the coarse-grained heat-affected zone of high-strength low-alloy steels. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
239. Qiang Wang, Ru Sheng Lu, Fang Wang, Zhu He, Guangqiang Li (2021). Numerical Study of Evaporation Behavior of Molten Manganese Metal During Electroslag Recycling Process. Metallurgical and Materials Transactions B.DOI
240. Yuxin Cao, Xiangliang Wan, Feng Zhou, Hangyu Dong, Kaiming Wu, Guangqiang Li (2021). The critical influence of La content on the microstructure-toughness relationship in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Metallurgical Research & Technology.DOI
241. Yu Liu, Guangqiang Li, Qiang Wang, Ru Sheng Lu, Xijie J. Wang, Yufeng Tian (2021). Effect of slag composition on desulfurization during recycling rejected electrolytic manganese metal by electroslag remelting. Metallurgical Research & Technology.DOI
242. 刘昱，李光强，王肸杰，黄雪驰，王强，李宝宽（2020）. 真空电渣重熔过程中钢液净化的机理研究. 《第十届中国金属学会青年学术年会暨第四届辽宁青年科学家论坛会议指南》.DOI
243. 刘昱，田雨丰，李光强，李存林，肖永力，李永谦（2020）. 转炉钢渣炉内改质的研究进展及展望. 《2020年全国冶金能源环保技术交流会》.DOI
244. 朱诚意，黄罗翼，罗小燕，刘玉龙，汪勇，李光强（2020）. 钙处理对成品无取向硅钢夹杂物特性的影响. 《钢铁研究学报》.DOI
245. 闫学强，郑万，王国伟，鄢文，李光强（2020）. 微孔MgO耐火材料对钢液洁净度的影响. 《钢铁研究学报》.DOI
246. 曹玉龙，姜周华，董艳伍，李光强，赵峥嵘（2020）. 电渣复合法制备双金属复合轧辊的研究进展. 《特殊钢》.
247. 王强，卢汝，刘昱，李光强，杨永祥（2020）. 电解碎锰电渣重熔脱硫过程的数值模拟研究. 《第五届全国电磁冶金与强磁场材料科学年会》.DOI
248. Bo Feng, Guangqiang Li, Xiaoming Hu, Peihai Liu, Rusong Li, Yanglin Zhang, Yawei Li, Zhu He, Xi’an Fan (2020). Enhancement of thermoelectric performances of BiCuSeO through Y doping and grain refining. Journal of Materials Science Materials in Electronics.DOI
249. Yongshun Zou, Ao Huang, Runfeng Wang, Lvping Fu, Huazhi Gu, Guangqiang Li (2020). Slag corrosion-resistance mechanism of lightweight magnesia-based refractories under a static magnetic field. Corrosion Science.DOI
250. Muhan Wu, Ao Huang, Chen Guang Bai, Huazhi Gu, Guangqiang Li (2020). Corrosion Mechanisms of Different Refractory Aggregates in Contact with SiO2-MgO-Based Slag. Interceram - International Ceramic Review.DOI
251. Chengyang Hu, Xiangliang Wan, Kai Ming Wu, D.M. Xu, Guangqiang Li, Guang Xu, R.D.K. Misra (2020). On the impacts of grain refinement and strain-induced deformation on three-body abrasive wear responses of 18Cr–8Ni austenitic stainless steel. Wear.DOI
252. Qiang Wang, Ru Sheng Lu, Zhiyuan Chen, Guangqiang Li, Yongxiang Yang (2020). CFD and Experimental Investigation of Desulfurization of Rejected Electrolytic Manganese Metal in Electroslag Remelting Process. Metallurgical and Materials Transactions B.DOI
253. Xijie J. Wang, Guangqiang Li, Yu Liu, Qiang Wang, Zhao Zhang (2020). Role of slag on inclusions control and its effect on primary carbides in H13 steel. Metallurgical Research & Technology.DOI
254. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Microstructure evolution of roll core during the preparation of composite roll by electroslag remelting cladding technology. High Temperature Materials and Processes.DOI
255. Tianqing Li, Junfeng Chen, Junli Xiao, Yaowu Wei, Guangqiang Li, Shaowei Zhang, Nan Li (2020). Formation of liquid‐phase isolation layer on the corroded interface of MgO/Al 2 O 3 ‐SiC‐C refractory and molten steel: Role of SiC. Journal of the American Ceramic Society.DOI
256. Xijie J. Wang, Yu Liu, Guangqiang Li, Qiang Wang, Tengfei Li, Yuxin Cao (2020). Effect of Ce2O3 on the fluoride vaporization of CaF2–CaO–Al2O3-(Ce2O3) slag used for vacuum electroslag remelting. Vacuum.DOI
257. Yong Wang, Chengyi Zhu, Guangqiang Li, Yulong Liu, Yu Liu (2020). Influence of Nb Content on Precipitation, Grain Microstructure, Texture and Magnetic Properties of Grain-Oriented Silicon Steel. Materials.DOI
258. Junjie Yan, Wen Yan, Stefan Schafföner, Yajie Dai, Zhe Chen, Qiang Wang, Guangqiang Li, Cangjian Jia (2020). Effect of microporous magnesia aggregates on microstructure and properties of periclase-magnesium aluminate spinel castables. Ceramics International.DOI
259. Qiang Wang, Yu Liu, Ru Sheng Lu, Fang Wang, Zhu He, Guangqiang Li (2020). Influence of Electro-Emulsification on Desulfurization of Rejected Electrolytic Manganese Metal in Electroslag Remelting Process. Metallurgical and Materials Transactions B.DOI
260. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Interface Characteristics of GCr15/45 Carbon Steel Composite Billet Produced by Electroslag Remelting Cladding. MATERIALS TRANSACTIONS.DOI
261. Yang Gao, Xiaolong Guo, Yong Wang, Yulong Liu, Chengyi Zhu, Guangqiang Li (2020). Effect of Nb content on primary recrystallization microstructure, texture and magnetic properties of grain-oriented silicon steel manufactured by low-temperature slab reheating. Journal of Magnetism and Magnetic Materials.DOI
262. Yifan Huang, Zhe Chen, Wen Yan, Yajie Dai, Guangqiang Li, Qiang Wang, Nan Li, Yawei Li (2020). Microstructures and strengths of microporous MgO‐Al 2 O 3 refractory aggregates using two types of magnesite. International Journal of Applied Ceramic Technology.DOI
263. Muhan Wu, Ao Huang, Shuang Yang, Huazhi Gu, Lvping Fu, Guangqiang Li, Hongyuan Dong (2020). Corrosion mechanism of Al2O3–SiC–C refractory by SiO2–MgO-based slag. Ceramics International.DOI
264. Wan Zheng, Xueqiang Yan, Shan Xiong, Guowei Wang, Guangqiang Li (2020). Pitting corrosion behavior of cerium treated HSLA steel induced by sulfide inclusions in 3.5 wt% NaCl solution. Journal of Rare Earths.DOI
265. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Effect of Electrode Immersion Depth on the Electrical Resistance and Heat Generation in the Electroslag Remelting Process. JOM.DOI
266. Yanhui Hou, Jingru Wang, Linli Liu, Guangqiang Li, Dongyu Zhai (2020). Mechanism of pitting corrosion induced by inclusions in Al-Ti-Mg deoxidized high strength pipeline steel. Micron.DOI
267. H. H. Wang, Lingchao Meng, Qiang Guo Luo, Chaoyang Sun, Guangqiang Li, Xiangliang Wan (2020). Superior cryogenic toughness of high-Mn austenitic steel by welding thermal cycles: The role of grain boundary evolution. Materials Science and Engineering A.DOI
268. Qiang Wang, Shuyuan Jia, Fengsheng Qi, Guangqiang Li, Yawei Li, Tao Wang, Zhu He (2020). A CFD Study on Refractory Wear in RH Degassing Process. ISIJ International.DOI
269. Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li (2020). Fabrication and properties of in situ intergranular CaZrO3 modified microporous magnesia aggregates. Ceramics International.DOI
270. Qiang Wang, Yu Liu, Ao Huang, Wen Yan, Huazhi Gu, Guangqiang Li (2020). CFD investigation on influence of orifice geometry on micro-scale inclusion movement. Powder Technology.DOI
271. Zhe Chen, Wen Yan, Stefan Schafföner, Yajie Dai, Qiang Wang, Guangqiang Li (2020). A novel approach to lightweight alumina‐carbon refractories for flow control of molten steel. Journal of the American Ceramic Society.DOI
272. Yang Gao, Guang Xu, Xiaolong Guo, Guangqiang Li, Yong Wang (2020). Primary recrystallization characteristics and magnetic properties improvement of high permeability grain-oriented silicon steel by trace Cr addition. Journal of Magnetism and Magnetic Materials.DOI
273. Ao Huang, Yanzhu Huo, Juan Yang, Huazhi Gu, Guangqiang Li (2020). Computational Modeling and Prediction on Viscosity of Slags by Big Data Mining. Minerals.DOI
274. Yong Wang, Chengyi Zhu, Guangqiang Li, Yulong Liu, Yu Liu (2020). Effect of decarburisation and nitriding on the carbon content, precipitates, microstructure and texture of Nb-bearing grain-oriented silicon steel. Materials at High Temperatures.DOI
275. 汪勇，李光强，朱诚意，刘玉龙，刘昱（2019）. Nb对取向硅钢再加热过程组织演变和第二相粒子析出的影响. 《钢铁钒钛》.
276. 王金明，万响亮，王红鸿，李光强（2019）. 冷变形对高锰奥氏体钢组织以及力学性能的影响. 《材料热处理学报》.DOI
277. 万响亮，沈毓，李钰，成林，李光强，吴开明（2019）. 氧化物和C、Mn对低合金钢铁素体形核的影响. 《材料热处理学报》.DOI
278. 史先菊，李光强，李军，刘代飞（2019）. 高比例配用镜铁矿烧结技术研究. 《第十二届中国钢铁年会论文集——1.炼铁与原料》.DOI
279. 侯延辉，刘林利，李光强，李腾飞，刘昱（2019）. 钢中复合夹杂物/钢基体的电势差与电偶腐蚀的关系. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
280. Yanhui Hou, Tengfei Li, Guangqiang Li, Changgui Cheng (2019). Mechanism of Yttrium composite inclusions on the localized corrosion of pipeline steels in NaCl solution. Micron.DOI
281. Yu Liu, Yong Wang, Guangqiang Li, Huan Cai, Honghong Wang, Xiangliang Wan (2019). Oxidation Behavior and Subsurface Phase Transformation of Novel High Mn Cryogenic Steel during Heat Treatment. steel research international.DOI
282. Yu Liu, Xijie Wang, Guangqiang Li, Xuechi Huang, Qiang Wang, Baokuan Li (2019). Cleanliness improvement and microstructure refinement of ingot processed by vacuum electroslag remelting. Journal of Materials Research and Technology.DOI
283. Zigui Luo, Xi’an Fan, Wentao Hu, Fan Luo, Jian Wang, Zhaoyang Wu, Xin Liu, Guangqiang Li, Yawei Li (2019). Properties of Fe2SiO4/SiO2 coated Fe-Si soft magnetic composites prepared by sintering Fe-6.5wt%Si/Fe3O4 composite particles. Journal of Magnetism and Magnetic Materials.DOI
284. Jiangtao Qi, Wen Yan, Zhe Chen, Stefan Schafföner, Wenying Zhou, Guangqiang Li, Qiang Wang (2019). Preparation and characterization of microporous mullite-corundum refractory aggregates with high strength and closed porosity. Ceramics International.DOI
285. Qiang Wang, Yu Liu, Ao Huang, Wen Yan, Huazhi Gu, Guangqiang Li (2019). CFD Investigation of Effect of Multi-hole Ceramic Filter on Inclusion Removal in a Two-Strand Tundish. Metallurgical and Materials Transactions B.DOI
286. Yu Liu, Qiang Wang, Guangqiang Li, Jinshuai Zhang, Wen Yan, Ao Huang (2019). Role of graphite on the corrosion resistance improvement of MgO–C bricks to MnO-rich slag. Ceramics International.DOI
287. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Jianxin Yu, Guang Xu (2019). On the deformation mechanism of austenitic stainless steel at elevated temperatures: A critical analysis of fine-grained versus coarse-grained structure. Materials Science and Engineering A.DOI
288. Xijie J. Wang, Guangqiang Li, Yu Liu, Yulong Cao, Fang Wang, Qiang Wang (2019). Investigation of Primary Carbides in a Commercial-Sized Electroslag Remelting Ingot of H13 Steel. Metals.DOI
289. Xiaoming Hu, Jie Hu, Xi’ an Fan, Bo Feng, Zhao Pan, Peihai Liu, Yanglin Zhang, Rusong Li, Zhu He, Guangqiang Li, Yawei Li (2019). Artificial porous structure: An effective method to improve thermoelectric performance of Bi2Te3 based alloys. Journal of Solid State Chemistry.DOI
290. Wentao Hu, Xi’an Fan, Zigui Luo, Fan Luo, Guangqiang Li, Yawei Li, Jian Wang (2019). Microstructure and Magnetic Properties of Fe/ZrSiO4 Composites Prepared by Mechanical Milling and Spark Plasma Sintering. IEEE Transactions on Magnetics.DOI
291. Yongshun Zou, Huazhi Gu, Ao Huang, Lvping Fu, Guangqiang Li (2019). Fabrication and analysis of lightweight magnesia based aggregates containing nano-sized intracrystalline pores. Materials & Design.DOI
292. Bo Feng, Guangqiang Li, Xiaoming Hu, Peihai Liu, Rusong Li, Yanglin Zhang, Yawei Li, Zhu He, Xi’an Fan (2019). Improvement of thermoelectric and mechanical properties of BiCuSeO-based materials by SiC nanodispersion. Journal of Alloys and Compounds.DOI
293. Fan Luo, Xi’an Fan, Zigui Luo, Wentao Hu, Jian Wang, Zhaoyang Wu, Guangqiang Li, Yawei Li, Xin Liu (2019). Preparation and magnetic properties of FeSiAl-based soft magnetic composites with MnO/Al2O3 insulation layer. Journal of Magnetism and Magnetic Materials.DOI
294. Jianjian Liu, Chengyi Zhu, Guangqiang Li (2019). Effect of Graphene/Graphene Oxide on Wear Resistance and Thermal Conductivity of Co-Ni Coatings. JOM.DOI
295. Zigui Luo, Xi’an Fan, Wentao Hu, Fan Luo, Jian Wang, Zhaoyang Wu, Xin Liu, Guangqiang Li, Yawei Li (2019). Formation mechanism and enhanced magnetic properties of Fe–Si/Fe2SiO4 soft magnetic composites transformed from Fe-6.5 wt%Si/α-Fe2O3 core-shell composites. Journal of Alloys and Compounds.DOI
296. Yanhui Hou, Gang Xiong, Linli Liu, Guangqiang Li, Nele Moelans, Muxing Guo (2019). Effects of LaAlO3 and La2O2S inclusions on the initialization of localized corrosion of pipeline steels in NaCl solution. Scripta Materialia.DOI
297. Bo Feng, Guangqiang Li, Xiaoming Hu, Peihai Liu, Rusong Li, Yanglin Zhang, Yawei Li, Zhu He, Xi’an Fan (2019). Enhancement of the Thermoelectric Properties of BiCuSeO via In Doping and Powder Size Controlling. Journal of Electronic Materials.DOI
298. Bo Feng, Xingxing Jiang, Zhao Pan, Lei Hu, Xiaoming Hu, Peihai Liu, Yang Ren, Guangqiang Li, Yawei Li, Xi’an Fan (2019). Preparation, Structure, and enhanced thermoelectric properties of Sm-doped BiCuSeO oxyselenide. Materials & Design.DOI
299. Wenxuan Zhang, Ao Huang, Yongshun Zou, Huazhi Gu, Lvping Fu, Guangqiang Li (2019). Corrosion modeling of magnesia aggregates in contact with CaO–MgO–SiO 2 slags. Journal of the American Ceramic Society.DOI
300. Zigui Luo, Xi’an Fan, Wentao Hu, Fan Luo, Jian Wang, Zhaoyang Wu, Xin Liu, Guangqiang Li, Yawei Li (2019). High performance Fe-Si soft magnetic composites coated with novel insulating-magnetic-insulating (IMI) layer. Journal of Magnetism and Magnetic Materials.DOI
301. Yulong Cao, Xiangliang Wan, Yanhui Hou, Y. Liu, Mingming Song, Guangqiang Li (2019). Comparative study on the effect of Y content on grain refinement in the simulated coarse-grained heat-affected zone of X70 pipeline steels. Micron.DOI
302. Yifeng Liu, Lin Wu, J F Zhang, Shasha Shu, Jiaxin Liu, J H Xu, Guangqiang Li, Ya Nan Hu, Shuiming Cheng, Rui Zhang, Ling Tong (2019). Preparation and Properties of Chromium-Free Corrosion-Resistant Coatings for Oriented Silicon Steel. IOP Conference Series Materials Science and Engineering.DOI
303. Wenke Liu, Qingwei Qin, Dengqi Li, Guangqiang Li, Yinjie Cen, Jianyu Liang (2019). Lead recovery from spent lead acid battery paste by hydrometallurgical conversion and thermal degradation. Waste Management & Research The Journal for a Sustainable Circular Economy.DOI
304. Fan Luo, Xi’an Fan, Zigui Luo, Wentao Hu, Jian Wang, Zhaoyang Wu, Guangqiang Li, Yawei Li, Xin Liu (2019). Influences of Fe2O3 content on structure and magnetic performances of FeSiAl soft magnetic composites. Materials Research Express.DOI
305. Xiaolong Gan, Xiangliang Wan, Yongjie Zhang, Honghong Wang, Guangqiang Li, Guang Xu, Kaiming Wu (2019). Investigation of characteristic and evolution of fine-grained bainitic microstructure in the coarse-grained heat-affected zone of super-high strength steel for offshore structure. Materials Characterization.DOI
306. Fan Luo, Xi’an Fan, Zigui Luo, Wentao Hu, Jian Wang, Zhaoyang Wu, Guangqiang Li, Yawei Li, Xin Liu (2019). Microstructure, formation mechanism and magnetic properties of Fe1.82Si0.18@Al2O3 soft magnetic composites. Journal of Magnetism and Magnetic Materials.DOI
307. Beiyue Ma, Gao Zhi, Chang Su, Xinming Ren, Guangqiang Li, Qiang Zhu (2019). Recycling of coal ash for production of dense β‐Sialon/ZrN/ZrON‐based ceramics without sintering aids via pressureless sintering. International Journal of Applied Ceramic Technology.DOI
308. Zigui Luo, Xi’an Fan, Wentao Hu, Fan Luo, Guangqiang Li, Yawei Li, Jian Wang, Xin Liu (2019). Effect of sintering temperature on microstructure and magnetic properties for Fe-Si soft magnetic composites prepared by water oxidation combined with spark plasma sintering. Journal of Magnetism and Magnetic Materials.DOI
309. Qiang Wang, Yu Liu, Fang Wang, Yulong Cao, Guangqiang Li (2019). Study on Sulfur Transfer Behavior during Refining of Rejected Electrolytic Manganese Metal. Metals.DOI
310. Xiaoming Hu, Qiusheng Xiang, Dong Kong, Xi’an Fan, Bo Feng, Zhao Pan, Peihai Liu, Rusong Li, Guangqiang Li, Yawei Li (2019). The effect of Ni/Sn doping on the thermoelectric properties of BiSbTe polycrystalline bulks. Journal of Solid State Chemistry.DOI
311. Yuxin Cao, Xiangliang Wan, Yanhui Hou, Chenrui Niu, Yu Liu, Guangqiang Li (2019). In Situ Observation of Grain Refinement in the Simulated Heat‐Affected Zone of Al–Ti‐0.05% Ce‐Deoxidized Steel. steel research international.DOI
312. Qiang Wang, Guangqiang Li, Zhang We, Yongxiang Yang (2019). An Investigation of Carburization Behavior of Molten Iron for the Flash Ironmaking Process. Metallurgical and Materials Transactions B.DOI
313. Guiyuan Wu, Wen Yan, Stefan Schafföner, Yajie Dai, Bingqiang Han, Tianqing Li, Sanbao Ma, Nan Li, Guangqiang Li (2019). A comparative study on the microstructures and mechanical properties of a dense and a lightweight magnesia refractories. Journal of Alloys and Compounds.DOI
314. Qi Wang, X. -J. Wang, Guangqiang Li, Y. Liu (2019). Investigation on Band Segregate Formation during the Electroslag Remelting of H13 Die Steel. IOP Conference Series Materials Science and Engineering.DOI
315. Yulong Liu, Chengyi Zhu, Juan Jia, Yong Wang, Yu Liu, Guangqiang Li (2019). Effect of Normalizing Annealing Temperature on Precipitates and Texture of Nb-Cr-Bearing Decarburized Grain-Oriented Silicon Steels. Metals.DOI
316. Longchao Liu, Qiang Yue, Guangqiang Li, Kun Xu, J. Wang, Zhaoyang Wu, Xi’an Fan (2019). Influence of SiO2 insulation layers thickness distribution on magnetic behaviors of Fe-Si@SiO2 soft magnetic composites. Journal of Physics and Chemistry of Solids.DOI
317. Fan Luo, Xi’an Fan, Zigui Luo, Wentao Hu, Guangqiang Li, Yawei Li, Xin Liu, Jian Wang (2019). Ultra-low inter-particle eddy current loss of Fe3Si/Al2O3 soft magnetic composites evolved from FeSiAl/Fe3O4 core-shell particles. Journal of Magnetism and Magnetic Materials.DOI
318. Ao Huang, Yanzhu Huo, Juan Yang, Guangqiang Li (2019). Computational Simulation and Prediction on Electrical Conductivity of Oxide-Based Melts by Big Data Mining. Materials.DOI
319. Qiang Guo Luo, H. H. Wang, Guangqiang Li, Chaoyang Sun, D.H. Li, Xiangliang Wan (2019). On mechanical properties of novel high-Mn cryogenic steel in terms of SFE and microstructural evolution. Materials Science and Engineering A.DOI
320. Yulong Cao, Zhouhua Jiang, Yanwu Dong, Guangqiang Li, Zhiwen Hou, Qiang Wang (2019). Research on the bimetallic composite roll produced by a new electroslag cladding method: microstructure and property of the bonding interface. Ironmaking & Steelmaking Processes Products and Applications.DOI
321. Yuxin Cao, Guangqiang Li, Yanhui Hou, Nele Moelans, Muxing Guo (2019). DFT study on the mechanism of inclusion-induced initial pitting corrosion of Al-Ti-Ca complex deoxidized steel with Ce treatment. Physica B Condensed Matter.DOI
322. Yigui Lao, Yunming Gao, Fangjie Deng, Qiang Wang, Guangqiang Li (2019). Effects of basicity and CaF2 on the viscosity of CaF2–CaO–SiO2 slag for electroslag remelting process. Metallurgical Research & Technology.DOI
323. Yong Wang, Chengyi Zhu, Guangqiang Li, Yu Liu, Bowen Zhou (2019). The effect of Nb content on precipitates, microstructure and texture of grain oriented silicon steel. High Temperature Materials and Processes.DOI
324. Yu Liu, Zhao Zhang, Guangqiang Li, Yang Wu, Xijie J. Wang, Baokuan Li (2019). Effect of SiO2 containing slag for electroslag remelting on inclusion modification of 42CrMo steel. Metallurgical Research & Technology.DOI
325. 郑万，李天佑，王春锋，熊珊，李光强，朱诚意（2018）. 钙处理工艺的发展与展望. 《炼钢》.
326. 罗小燕，朱诚意，李光强，严哲锋，冯嘉鑫（2018）. 热装温度对无取向硅钢中夹杂物析出特性的影响. 《武汉科技大学学报》.
327. 刘昱，汪勇，李光强，王强，李宝宽，张钊（2018）. 电流强度对电渣重熔304不锈钢中夹杂物特征的影响. 《武汉科技大学学报》.
328. 王肸杰，王强，李光强，张钊，刘昱，赵栋（2018）. EAF+LF+VD+ESR工艺生产热作模具钢H13的洁净度. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
329. 汪瑞婷，李光强，王强，刘昱，李宝宽（2018）. 电渣重熔过程夹杂物运动行为的数值模拟. 《钢铁研究学报》.
330. Yang Gao, Guang Xu, Xiaolong Guo, Guangqiang Li (2018). Effect of Cr on secondary recrystallization behaviors in high permeability grain oriented silicon steel manufactured by low-temperature slab reheating. Journal of Magnetism and Magnetic Materials.DOI
331. Bowen Zhou, Ch. Zhu, Guangqiang Li, Zheng Zhi Luo, Y. Gao, Siqian Bao, J. Schneider (2018). Effect of Sulfur and Acid Soluble Aluminum Content on Precipitate and Microstructure of Grain-Oriented Silicon Steel. Archives of Metallurgy and Materials.DOI
332. Zigui Luo, Xi’an Fan, Wentao Hu, Fan Luo, Guangqiang Li, Yawei Li, Xin Liu, Jian Wang (2018). Controllable SiO2 insulating layer and magnetic properties for intergranular insulating Fe-6.5wt.%Si/SiO2 composites. Advanced Powder Technology.DOI
333. Bo Feng, Guangqiang Li, Zhao Pan, Xiaoming Hu, Peihai Liu, Zhu He, Yawei Li, Xi’an Fan (2018). Enhanced thermoelectric properties in BiCuSeO ceramics by Pb/Ni dual doping and 3D modulation doping. Journal of Solid State Chemistry.DOI
334. Xiaoming Hu, Xi’ an Fan, Chengpeng Jiang, Zhao Pan, Bo Feng, Peihai Liu, Guangqiang Li, Yawei Li (2018). Thermal stability of n-type zone-melting Bi2(Te, Se)3 alloys for thermoelectric generation. Materials Research Express.DOI
335. Yu Liu, Xiangliang Wan, Guangqiang Li, Yong Wang, Wan Zheng, Yanhui Hou (2018). Particle and microstructural characteristics in the coarse-grained heat-affected zone of Al–Ti–Ca complex deoxidized steels. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
336. Dongdong Xu, Xiangliang Wan, Jianxin Yu, Guang Xu, Guangqiang Li (2018). Effect of strain rate on microstructures and mechanical properties of Fe–18Cr–8Ni steel. Materials Science and Technology.DOI
337. Bo Feng, Guangqiang Li, Zhao Pan, Xiaoming Hu, Peihai Liu, Yawei Li, Zhu He, Xi’an Fan (2018). Enhanced thermoelectric performances in BiCuSeO oxyselenides via Er and 3D modulation doping. Ceramics International.DOI
338. Yu Shen, Xiangliang Wan, Yu Liu, Guangqiang Li, Zhengliang Xue, Kaiming Wu (2018). The significant impact of Ti content on microstructure–toughness relationship in the simulated coarse-grained heated-affected zone of high-strength low-alloy steels. Ironmaking & Steelmaking Processes Products and Applications.DOI
339. Bo Feng, Guangqiang Li, Zhao Pan, Yanhui Hou, Chengcheng Zhang, Chengpeng Jiang, Jie Hu, Qiusheng Xiang, Yawei Li, Zhu He, Xi’an Fan (2018). Effect of Ba and Pb dual doping on the thermoelectric properties of BiCuSeO ceramics. Data in Brief.DOI
340. Yu Liu, Zhao Zhang, Guangqiang Li, Qiang Wang, Baokuan Li (2018). Effect of Current on Segregation and Inclusions Characteristics of Dual Alloy Ingot Processed by Electroslag Remelting. High Temperature Materials and Processes.DOI
341. Yu Liu, Zhao Zhang, Guangqiang Li, Yang Wu, Deming Xu, Baokuan Li (2018). Investigation of fluoride vaporization from CaF2CaO Al2O3 slag for vacuum electroslag remelting. Vacuum.DOI
342. Bo Feng, Guangqiang Li, Zhao Pan, Xiaoming Hu, Peihai Liu, Yawei Li, Zhu He, Xi’an Fan (2018). Synergistic effects of Bi Deficiencies and Fe-doping on the thermoelectric properties and hardness of BiCuSeO ceramics. Journal of the Ceramic Society of Japan.DOI
343. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Jie Yu, Yongjie Zhang, Guang Xu (2018). The significant impact of cold deformation on structure-property relationship in phase reversion-induced stainless steels. Materials Characterization.DOI
344. Hongbo Hu, Yunming Gao, Yigui Lao, Qingwei Qin, Guangqiang Li, George Zheng Chen (2018). Yttria-Stabilized Zirconia Aided Electrochemical Investigation on Ferric Ions in Mixed Molten Calcium and Sodium Chlorides. Metallurgical and Materials Transactions B.DOI
345. Qiang Wang, Meijia Sun, Baokuan Li, Guangqiang Li, Jianping Peng (2018). Numerical modeling of effect of slot on bubble motion in aluminum electrolytic process. Transactions of Nonferrous Metals Society of China.DOI
346. Bo Feng, Guangqiang Li, Zhao Pan, Xiaoming Hu, Peihai Liu, Zhu He, Yawei Li, Xi’an Fan (2018). Enhanced thermoelectric performance in BiCuSeO oxyselenides via Ba/Te dual-site substitution and 3D modulation doping. Journal of Solid State Chemistry.DOI
347. Yu Liu, Guangqiang Li, Ruiting Wang, Qiang Wang, Yong Wang, Baokuan Li (2018). Prediction of surface oxidation weight gain on 7.8 wt% Cr-containing stainless steel electrode during electroslag remelting. Materials at High Temperatures.DOI
348. Deming Xu, Xiangliang Wan, Jianxin Yu, Guang Xu, Guangqiang Li (2018). Effect of Cold Deformation on Microstructures and Mechanical Properties of Austenitic Stainless Steel. Metals.DOI
349. Qing Yuan, Guang Xu, Sheng Liu, Man Liu, Haijiang Hu, Guangqiang Li (2018). Effect of Rolling Reduction on Microstructure and Property of Ultrafine Grained Low-Carbon Steel Processed by Cryorolling Martensite. Metals.DOI
350. Honghai Liu, W. Chang, Guangqiang Li, J. Kong, Yunlun Sun, Guanglong Jiang (2018). Thermal Mechanical Stress Analysis of Ladle Lining with Integral Brick Joint. Archives of Metallurgy and Materials.DOI
351. Jie Hu, Xi’an Fan, Chengpeng Jiang, Bo Feng, Qiusheng Xiang, Guangqiang Li, Zhu He, Yawei Li (2018). Introduction of porous structure: A feasible and promising method for improving thermoelectric performance of Bi2Te3 based bulks. Journal of Material Science and Technology.DOI
352. Bo Feng, Guangqiang Li, Zhao Pan, Xiaoming Hu, Peihi Liu, Yawei Li, Zhu He, Xi’an Fan (2018). Enhancing thermoelectric and mechanical performances in BiCuSeO by increasing bond covalency and nanostructuring. Journal of Solid State Chemistry.DOI
353. Yu Zhang, Junfeng Chen, Nan Li, Yaowu Wei, Bingqiang Han, Yaping Cao, Guangqiang Li (2018). The microstructure evolution and mechanical properties of MgO-C refractories with recycling Si/SiC solid waste from photovoltaic industry. Ceramics International.DOI
354. Qiang Wang, Ruiting Wang, Zhu He, Guangqiang Li, Baokuan Li, Huabing Li (2018). Numerical analysis of inclusion motion behavior in electroslag remelting process. International Journal of Heat and Mass Transfer.DOI
355. Yu Liu, Xiangliang Wan, Guangqiang Li, Yong Wang, Wan Zheng, Yanhui Hou (2018). Grain refinement in coarse-grained heat-affected zone of Al–Ti–Mg complex deoxidised steel. Science and Technology of Welding & Joining.DOI
356. Yu Liu, Xijie J. Wang, Guangqiang Li, Qiang Wang, Zhao Zhang, Baokuan Li (2018). Role of vacuum on cleanliness improvement of steel during electroslag remelting. Vacuum.DOI
357. Bo Feng, Guangqiang Li, Zhao Pan, Hu Xiaoming, Liu Peihai, Zhu He, Yawei Li, Xi’an Fan (2018). Effect of synthesis processes on the thermoelectric properties of BiCuSeO oxyselenides. Journal of Alloys and Compounds.DOI
358. Chengpeng Jiang, Xi’an Fan, Jie Hu, Bo Feng, Qiusheng Xiang, Guangqiang Li, Yawei Li, Zhu He (2018). Thermal Stability of Zone Melting p-Type (Bi, Sb)2Te3 Ingots and Comparison with the Corresponding Powder Metallurgy Samples. Journal of Electronic Materials.DOI
359. Y. Liu, Guangqiang Li, Xiangliang Wan, H. Gang, Kaiming Wu, Xiang Zhang (2018). Quantitative analysis of microstructure and impact toughness in the simulated coarse-grained heat-affected zone of Cu-bearing steels. Mechanics of Advanced Materials and Structures.DOI
360. Dongdong Xu, Xiangliang Wan, Jianxin Yu, Guang Xu, Guangqiang Li (2018). Effect of grain refinement on strain hardening and fracture in austenitic stainless steel. Materials Science and Technology.DOI
361. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Xianguang Zhang, Guang Xu, Kaiming Wu (2018). The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel. Materials Science and Engineering A.DOI
362. Bo Feng, Guangqiang Li, Zhao Pan, Yanhui Hou, Chengcheng Zhang, Chengpeng Jiang, Jie Hu, Qiusheng Xiang, Yawei Li, Zhu He, Xi’an Fan (2018). Effect of Ba and Pb dual doping on the thermoelectric properties of BiCuSeO ceramics. Materials Letters.DOI
363. Zhao Pan, Xingxing Jiang, Jun Chen, Lei Hu, Hajime Yamamoto, Linxing Zhang, Longlong Fan, Xi’an Fan, Yawei Li, Guangqiang Li, Yang Ren, Zheshuai Lin, Masaki Azuma, Xianran Xing (2018). Large spontaneous polarization in polar perovskites of PbTiO 3 –Bi(Zn 1/2 Ti 1/2 )O 3. Inorganic Chemistry Frontiers.DOI
364. 王强，汪瑞婷，刘昱，张钊，李光强，李宝宽（2017）. 电渣重熔钢液滴落过程中夹杂物运动行为的模拟研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
365. 曹羽鑫，李光强，侯延辉（2017）. 夹杂物不同晶面诱导点蚀机理与功函数的关系. 《第十一届中国钢铁年会论文集——S06.钢铁材料》.
366. 郑万，瞿勇，付学好，李光强，吴振华（2017）. 含钛高强钢中夹杂物析出行为研究. 《武汉科技大学学报》.
367. 郑万，付学好，瞿勇，熊珊，李光强，秦庆伟（2017）. Al-Mg/Ti-Mg脱氧钢中夹杂物诱发点蚀行为研究. 《武汉科技大学学报》.
368. 刘昱，卢汝，李光强，王力，张钊，杨治争，饶江平（2017）. 碱性中间包覆盖剂对钢水洁净度的影响. 《武汉科技大学学报》.
369. 王恒辉，李光强，马江华，胡钰鑫，赵栋（2017）. 高磷赤铁矿制备碳化铁的产物分离试验研究. 《武汉科技大学学报》.
370. 郑万，熊珊，李天佑，阮墨，李光强，薛正良（2017）. 夹杂物对低合金钢点蚀诱发敏感性的影响. 《炼钢》.
371. 瞿勇，郑万，付学好，李光强，吴振华（2017）. 钙处理钛合金化钢中TiN析出行为. 《钢铁研究学报》.
372. 赵栋，李光强，王恒辉，马江华，沈毓，秦庆伟（2017）. 高磷鲕状赤铁矿酸浸脱磷动力学. 《钢铁研究学报》.
373. 王力，李光强，刘昱，张钊，李亚伟，徐小峰（2017）. 不同碳含量的MgO-C耐火材料与超低碳钢液的相互作用. 《钢铁研究学报》.
374. 郑万，贺志鹏，李光强，屠浩，张战（2017）. RH喷吹参数对循环流量和均混时间影响的物理模拟. 《钢铁研究学报》.
375. 肖爱达，李光强，李昭东，张波（2017）. 高Ti微合金化低碳钢230mm连铸板坯断裂分析和工艺改善. 《特殊钢》.
376. Qiang Wang, Fengsheng Qi, Zhu He, Yawei Li, Guangqiang Li (2017). Effect of graphite content and heating temperature on carbon pick-up of ultra-low-carbon steel from magnesia-carbon refractory using CFD modelling. International Journal of Heat and Mass Transfer.DOI
377. Ping Xue, Guangqiang Li, Yongxiang Yang, Qin-wei Qin, Ming-xing Wei (2017). Recovery of valuable metals from waste diamond cutters through ammonia–ammonium sulfate leaching. International Journal of Minerals Metallurgy and Materials.DOI
378. Qiang Wang, Yu Liu, Guangqiang Li, Yunming Gao, Zhu He, Baokuan Li (2017). Predicting transfer behavior of oxygen and sulfur in electroslag remelting process. Applied Thermal Engineering.DOI
379. Zhao Pan, Jun Chen, Xingxing Jiang, Lei Hu, Runze Yu, Hajime Yamamoto, Takahiro Ogata, Yuichiro Hattori, Fangmin Guo, Xi’an Fan, Yawei Li, Guangqiang Li, Huazhi Gu, Yang Ren, Zheshuai Lin, Masaki Azuma, Xianran Xing (2017). Colossal Volume Contraction in Strong Polar Perovskites of Pb(Ti,V)O 3. Journal of the American Chemical Society.DOI
380. Junfeng Chen, Nan Li, Yaowu Wei, Bingqiang Han, Guangqiang Li, Wen Yan, Yu Zhang (2017). Synthesis of Si3N4/SiC reaction-bonded SiC refractories: The effects of Si/C molar ratio on microstructure and properties. Ceramics International.DOI
381. Lei Yuan, Beiyue Ma, Qiang Zhu, Zijing Wang, Guangqiang Li, Jingkun Yu (2017). Preparation and properties of MgAl2O4 based ceramics reinforced with rod-like microcrystallines by co-doping Sm2O3 and La2O3. Ceramics International.DOI
382. Qiusheng Xiang, Xi’an Fan, Xuewu Han, Chengcheng Zhang, Jie Hu, Bo Feng, Chengpeng Jiang, Guangqiang Li, Yawei Li, Zhu He (2017). Bi 2 Te 3 based bulks with high figure of merit obtained from cut waste fragments of cooling crystal rods. Materials Chemistry and Physics.DOI
383. Yu Liu, Guangqiang Li, Xiangliang Wan, Xianguang Zhang, Yu Shen, Kaiming Wu (2017). Toughness improvement by Zr addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Ironmaking & Steelmaking Processes Products and Applications.DOI
384. Qiang Wang, Yu Liu, Fang Wang, Guangqiang Li, Baokuan Li, Wenwei Qiao (2017). Numerical Study on the Effect of Electrode Polarity on Desulfurization in Direct Current Electroslag Remelting Process. Metallurgical and Materials Transactions B.DOI
385. Qiusheng Xiang, Xi’an Fan, Xuewu Han, Chengcheng Zhang, Jie Hu, Bo Feng, Chengpeng Jiang, Guangqiang Li, Yawei Li, Zhu He (2017). Preparation and optimization of thermoelectric properties of Bi2Te3 based alloys using the waste particles as raw materials from the cutting process of the zone melting crystal rods. Journal of Physics and Chemistry of Solids.DOI
386. Chengpeng Jiang, Xi’an Fan, Jie Hu, Bo Feng, Qiusheng Xiang, Guangqiang Li, Yawei Li, Zhu He (2017). Degraded thermal stability of p-type Bi2Te3-based polycrystalline bulks for thermoelectric power generation at service temperature of 473 K. Journal of Materials Science Materials in Electronics.DOI
387. Qiang Wang, Fang Wang, Guangqiang Li, Yunming Gao, Baokuan Li (2017). Simulation and experimental studies of effect of current on oxygen transfer in electroslag remelting process. International Journal of Heat and Mass Transfer.DOI
388. Jie Hu, Xi’an Fan, Chengcheng Zhang, Chengpeng Jiang, Bo Feng, Qiusheng Xiang, Guangqiang Li, Zhu He, Yawei Li (2017). The initial powder-refinement-induced donor-like effect and nonlinear change of thermoelectric performance for Bi 2 Te 3 -based polycrystalline bulks. Semiconductor Science and Technology.DOI
389. Beiyue Ma, Xinming Ren, Yue Yin, Lei Yuan, Zhan Zhang, Zhiqiang Li, Guangqiang Li, Qiang Zhu, Jingkun Yu (2017). Effects of processing parameters and rare earths additions on preparation of Al2O3-SiC composite powders from coal ash. Ceramics International.DOI
390. Yu Liu, Zhao Zhang, Guangqiang Li, Qiang Wang, Li Wang, Baokuan Li (2017). Evolution of Desulfurization and Characterization of Inclusions in Dual Alloy Ingot Processed by Electroslag Remelting. steel research international.DOI
391. Yu Liu, Zhao Zhang, Guangqiang Li, Qiang Wang, Li Wang, Baokuan Li (2017). Effect of Current on Structure and Macrosegregation in Dual Alloy Ingot Processed by Electroslag Remelting. Metals.DOI
392. Yu Liu, Guangqiang Li, Li Wang, Zhao Zhang (2017). Effect of the Tundish Gunning Materials on the Steel Cleanliness. High Temperature Materials and Processes.DOI
393. Chengcheng Zhang, Xi’ an Fan, Jie Hu, Chengpeng Jiang, Qiusheng Xiang, Guangqiang Li, Yawei Li, Zhu He (2017). Changing the Band Gaps by Controlling the Distribution of Initial Particle Size to Improve the Power Factor of N‐Type Bi2Te3 Based Polycrystalline Bulks. Advanced Engineering Materials.DOI
394. H. H. Wang, Guangqiang Li, Dong Nan Zhao, Jianghua Ma, J. Yang (2017). Dephosphorization of high phosphorus oolitic hematite by acid leaching and the leaching kinetics. Hydrometallurgy.DOI
395. Yu Liu, Guangqiang Li, Xiangliang Wan, Honghong Wang, Kaiming Wu, R.D.K. Misra (2017). The role of Cu and Al addition on the microstructure and fracture characteristics in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels with superior toughness. Materials Science and Technology.DOI
396. Bo Feng, Guangqiang Li, Yanhui Hou, Chengcheng Zhang, Chengpeng Jiang, Jie Hu, Qiusheng Xiang, Yawei Li, Zhu He, Xi’an Fan (2017). Enhanced thermoelectric properties of Sb-doped BiCuSeO due to decreased band gap. Journal of Alloys and Compounds.DOI
397. Jian Wang, Xi’an Fan, Zhaoyang Wu, Guangqiang Li (2017). Regulation and control of insulated layers for intergranular insulated Fe/SiO2 soft magnetic composites. Journal of Materials Science.DOI
398. Qiang Wang, Guangqiang Li, Yunming Gao, Zhu He, Baokuan Li (2017). A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process. Journal of Applied Electrochemistry.DOI
399. Dongdong Xu, Guangqiang Li, Xiangliang Wan, Renlong Xiong, Guang Xu, Kaiming Wu, Mahesh Chandra Somani, R.D.K. Misra (2017). Deformation behavior of high yield strength – High ductility ultrafine-grained 316LN austenitic stainless steel. Materials Science and Engineering A.DOI
400. Peng‐Ju Chen, Cheng-yi Zhu, Guangqiang Li, Yawen Dong, Zhicheng Zhang (2017). Effect of Sulphur Concentration on Precipitation Behaviors of MnS-containing Inclusions in GCr15 Bearing Steels after LF Refining. ISIJ International.DOI
401. Dong Nan Zhao, Guangqiang Li, Henghui Wang, Jianghua Ma (2017). Slag/Metal Separation from H2-Reduced High Phosphorus Oolitic Hematite. ISIJ International.DOI
402. Henghui Wang, Guangqiang Li, Jianghua Ma, Dong Nan Zhao (2017). The effect of methane decomposition on the formation and magnetic properties of iron carbide prepared from oolitic hematite. RSC Advances.DOI
403. Qiang Wang, Yu Liu, Zhu He, Guangqiang Li, Baokuan Li (2017). Numerical Analysis of Effect of Current on Desulfurization in Electroslag Remelting Process. ISIJ International.DOI
404. Bowen Zhang, Beiyue Ma, Qiang Zhu, Shiming Li, Yikun Chen, Jingkun Yu, Guangqiang Li (2017). In-situ formation and densification of MgAl2O4-Y3Al5O12 and MgAl2O4-MgNb2O6 ceramics via a single-stage SRS process. Science of Sintering.DOI
405. H. H. Wang, Guangqiang Li, J. H., Dong Nan Zhao (2017). The stability, characteristics and magnetic properties of iron carbide from an oolitic hematite. RSC Advances.DOI
406. Ruogu Hou, Chengyi Zhu, Guangqiang Li, Bowen Zhou, Juan Jia (2017). Effect of Niobium on Precipitates and Texture Evolution of Fe-3% Si Grain-oriented Electrical Steel Annealed Hot Band. ISIJ International.DOI
407. 陈鹏举，朱诚意，张志成，李光强，潘明旭（2016）. GCr15轴承钢LF精炼过程脱硫能力的热力学评价. 《钢铁研究学报》.
408. 万响亮，李光强，吴开明（2016）. 低合金高强钢针状铁素体组织特征和形成机理. 《钢铁研究学报》.
409. 万响亮，李光强，周博文，马江华（2016）. 奥氏体不锈钢晶粒细化对形变机制和力学性能的影响. 《材料工程》.
410. 肖爱达，李光强，谢世正，邓之勋（2016）. 不同As含量的Ti微合金化IF钢热轧板酸洗行为研究. 《武汉科技大学学报》.
411. 郑万，齐盼盼，沈星，姜玉龙，李光强，朱诚意（2016）. 低碳低硫钢中MnS析出行为分析. 《武汉科技大学学报》.
412. 杨雪萍，李光强，饶江平，杨治争（2016）. 板坯连铸结晶器吹氩工艺参数优化. 《武汉科技大学学报》.
413. 张力，张武，李光强（2016）. 动态氧化条件下含钛高炉熔渣中金属铁的聚集、长大与沉降行为. 《工程科学学报》.
414. 张力，张武，李光强（2016）. 动态氧化条件下含钛高炉熔渣中钙钛矿析出与长大机理. 《工程科学学报》.
415. Yu Liu, Zhao Zhang, Guangqiang Li, Qiang Wang, Li Wang, Baokuan Li (2016). The Structural Evolution and Segregation in a Dual Alloy Ingot Processed by Electroslag Remelting. Metals.DOI
416. Qiang Wang, Guangqiang Li, Zhu He, Baokuan Li (2016). A three-phase comprehensive mathematical model of desulfurization in electroslag remelting process. Applied Thermal Engineering.DOI
417. Chengpeng Jiang, Xi’an Fan, Zhenzhou Rong, Chengcheng Zhang, Guangqiang Li, Bo Feng, Jie Hu, Qiusheng Xiang (2016). Elemental Diffusion and Service Performance of Bi2Te3-Based Thermoelectric Generation Modules with Flexible Connection Electrodes. Journal of Electronic Materials.DOI
418. Xiangliang Wan, Bowen Zhou, Krishna Chaitanya Nune, Yue Li, Kaiming Wu, Guangqiang Li (2016). In-situ microscopy study of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by TiN particle. Science and Technology of Welding & Joining.DOI
419. J. Schneider, Guangqiang Li, Armin Franke, Bowen Zhou (2016). Evolution of microstructure at hot band annealing of ferritic FeSi steels. Journal of Magnetism and Magnetic Materials.DOI
420. Chengpeng Jiang, Xi’an Fan, Bo Feng, Jie Hu, Qiusheng Xiang, Guangqiang Li, Yawei Li, Zhu He (2016). Thermal stability of p-type polycrystalline Bi2Te3-based bulks for the application on thermoelectric power generation. Journal of Alloys and Compounds.DOI
421. Yue Yin, Beiyue Ma, Shiming Li, Bowen Zhang, Jingkun Yu, Zhan Zhang, Guangqiang Li (2016). Synthesis of Al2O3-SiC composite powders from coal ash in NaCl-KCl molten salts medium. Ceramics International.DOI
422. Qiang Wang, Zhu He, Guangqiang Li, Baokuan Li, Chengyi Zhu, Pengju Chen (2016). Numerical investigation of desulfurization behavior in electroslag remelting process. International Journal of Heat and Mass Transfer.DOI
423. Li Zhang, Wu Zhang, Juhua Zhang, Guangqiang Li (2016). Effects of additives on the phase transformation, occurrence state, and the interface of the Ti component in Ti-bearing blast furnace slag. International Journal of Minerals Metallurgy and Materials.DOI
424. Bowen Zhou, Chengyi Zhu, Guangqiang Li, Xiangliang Wan, J. Schneider (2016). Effect of Acid-Soluble Aluminum Content on Precipitates and Microstructure of Annealed Hot-Rolled Grain-Oriented Silicon Steel. steel research international.DOI
425. Cheng Zhang, Xi’ an Fan, Jie Hu, Cheng Peng Jiang, Bo Feng, Qiu Sheng Xiang, Guangqiang Li, Ya Wei Li (2016). The Effect of Porosity and Milling Induced Defects on the Thermoelectric Properties of p‐Type Bi2Te3‐Based Bulks. Advanced Engineering Materials.DOI
426. Yanhui Hou, Wan Zheng, Zhenhua Wu, Guangqiang Li, Nele Moelans, Muxing Guo, Babar Shahzad Khan (2016). Study of Mn absorption by complex oxide inclusions in Al Ti Mg killed steels. Acta Materialia.DOI
427. H. H. Wang, Guangqiang Li, Xiangliang Wan, H. H. Wang, Krishna Chaitanya Nune, Yue Li, Kaiming Wu (2016). Microstructural characteristics and impact toughness in YS690MPa steel weld metal for offshore structures. Science and Technology of Welding & Joining.DOI
428. Henghui Wang, Guangqiang Li, Jian Yang, Jianghua Ma, Babar Shahzad Khan (2016). The Behavior of Phosphorus During Reduction and Carburization of High-Phosphorus Oolitic Hematite with H2 and CH4. Metallurgical and Materials Transactions B.DOI
429. Zhinan Chai, Jun Ding, Chengji Deng, Hongxi Zhu, Guangqiang Li, Chao Yu (2016). Ni-catalyzed synthesis of hexagonal plate-like alpha silicon nitride from nitridation of Si powder in molten salt media. Advanced Powder Technology.DOI
430. Zhenzhou Rong, Xi’an Fan, Fan Yang, Xinzhi Cai, Xuewu Han, Guangqiang Li (2016). Microwave activated hot pressing: A new opportunity to improve the thermoelectric properties of ntype Bi 2 Te 3x Se x bulks. Materials Research Bulletin.DOI
431. Li Zhang, Wu Zhang, Juhua Zhang, Guangqiang Li (2016). Oxidation Kinetics and Oxygen Capacity of Ti-Bearing Blast Furnace Slag under Dynamic Oxidation Conditions. Metals.DOI
432. Xuewu Han, Xi’an Fan, Chengcheng Zhang, Xinzhi Cai, Zhenzhou Rong, Guangqiang Li (2016). Pushing the optimal ZT values of p-type Bi2−xSbxTe3 alloys to a higher temperature by expanding band gaps and suppressing intrinsic excitation. Journal of Materials Science Materials in Electronics.DOI
433. Qiang Wang, Zhu He, Guangqiang Li, Baokuan Li (2016). Numerical investigation on species transport in electroslag remelting dual alloy ingot. Applied Thermal Engineering.DOI
434. Jian Wang, Xi’an Fan, Zhaoyang Wu, Guangqiang Li (2016). Intergranular insulated Fe/SiO 2 soft magnetic composite for decreased core loss. Advanced Powder Technology.DOI
435. Luwei Pan, Fangqin Dai, Jianning Huang, Shuang Liu, Guangqiang Li (2016). Study of the effect of mineral matters on the thermal decomposition of Jimsar oil shale using TG–MS. Thermochimica Acta.DOI
436. Bowen Zhou, Guangqiang Li, Xiangliang Wan, Li Yu, Kaiming Wu (2016). In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation. Metals and Materials International.DOI
437. Guangqiang Li, Chengyi Zhu, Junying Zhang (2016). Education Programs and Activities in China for the Sustainability of Metallurgical Industry and their Perspective.DOI
438. Cheng-yi Zhu, Peng‐Ju Chen, Guangqiang Li, Xiao-yan Luo, Wan Zheng (2016). A Mathematical Model of Desulphurization Kinetics for Ultra-low-sulfur Steels Refining by Powder Injection during RH Processing. ISIJ International.DOI
439. Beiyue Ma, Yue Yin, Qiang Zhu, Yingying Zhai, Ying Li, Guangqiang Li, Jingkun Yu (2016). Slag Corrosion and Penetration Behaviors of MgAl2O4 and Al2O3 Based Refractories. Refractories and Industrial Ceramics.DOI
440. 万响亮，李光强，周博文，马江华，徐光（2015）. 微米/纳米复合结构奥氏体不锈钢形变机理及应变硬化行为. 《材料热处理学报》.
441. 张帆，李光强，万响亮，陈兆平（2015）. 超纯铁素体不锈钢中TiN的析出热力学和动力学研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
442. 万响亮，许德明，李光强（2015）. 晶粒细化对301LN奥氏体不锈钢形变机制和力学性能的影响. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
443. 潘丽萍，贺铸，李宝宽，李光强（2015）. 6.5%Si钢双辊薄带连铸布流水口结构优化的三维数值模拟. 《特殊钢》.
444. 王珺，李光强，杨雪萍，贺铸，李宝宽（2015）. 电渣重熔过程中渣成分变化及钢中氧含量预测. 《钢铁研究学报》.
445. Xi’an Fan, Zhaoyang Wu, Guangqiang Li, Jiaxing Wang, Z.D. Xiang, Zhang Hua Gan (2015). High resistivity and low core loss of intergranular insulated Fe–6.5 wt.%Si/SiO2 composite compacts. Materials & Design.DOI
446. Jun Ding, Hongxi Zhu, Guangqiang Li, Chengji Deng, Zhinan Chai (2015). Catalyst-assisted synthesis of α-Si3N4 in molten salt. Ceramics International.DOI
447. Xi’an Fan, Xin Cai, Xue Han, Cheng Zhang, Zhenzhou Rong, Fan Yang, Guangqiang Li (2015). Evolution of thermoelectric performance for (Bi,Sb)2Te3 alloys from cutting waste powders to bulks with high figure of merit. Journal of Solid State Chemistry.DOI
448. Bowen Zhou, Chengyi Zhu, Guangqiang Li, Yong Zheng Fu (2015). Effect of sulphur and acid soluble aluminium content on grain oriented silicon steel. Materials Science and Technology.DOI
449. Xi’an Fan, Jian Wang, Zhaoyang Wu, Guangqiang Li (2015). Core–shell structured FeSiAl/SiO2 particles and Fe3Si/Al2O3 soft magnetic composite cores with tunable insulating layer thicknesses. Materials Science and Engineering B.DOI
450. Jian Wang, Xi’an Fan, Zhaoyang Wu, Guangqiang Li (2015). Synthesis, microstructure and magnetic properties of Fe3Si0.7Al0.3@SiO2 core–shell particles and Fe3Si/Al2O3 soft magnetic composite core. Journal of Solid State Chemistry.DOI
451. B. Y. Ma, Yue Yin, Y. Li, G. Q. Liu, Weibo Huang, Zhixin Chen, Guangqiang Li, Jingkun Yu (2015). Facile synthesis of MgAl2O4 with high crystallinity from KCl–MgCl2 composite molten salts. Materials Research Innovations.DOI
452. Luwei Pan, Fangqin Dai, Guangqiang Li, Shuang Liu (2015). A TGA/DTA-MS investigation to the influence of process conditions on the pyrolysis of Jimsar oil shale. Energy.DOI
453. Jun Ding, Hongxi Zhu, Chengji Deng, Guangqiang Li, Kanglei Wang, Jianpeng Liu (2015). Preparation and characterisation of porous biomorphic SiC/C ceramic from molten salt. Ceramics International.DOI
454. Jianyi Zhang, Xi’an Fan, Lei Lü, Xiaoming Hu, Guangqiang Li (2015). Ferrites based infrared radiation coatings with high emissivity and high thermal shock resistance and their application on energy-saving kettle. Applied Surface Science.DOI
455. Zhenhua Wu, Wan Zheng, Guangqiang Li, Hiroyuki Matsuura, Fumitaka Tsukihashi (2015). Effect of Inclusions’ Behavior on the Microstructure in Al-Ti Deoxidized and Magnesium-Treated Steel with Different Aluminum Contents. Metallurgical and Materials Transactions B.DOI
456. Ping Xue, Guangqiang Li, Qingwei Qin (2015). Recovery of Copper from Slow Cooled Ausmelt Furnace Slag by Floatation.DOI
457. Xi’an Fan, Fan Yang, Zhenzhou Rong, Xinzhi Cai, Guangqiang Li (2015). Characterization and thermoelectric properties of Bi0.4Sb1.6Te3 nanostructured bulk prepared by mechanical alloying and microwave activated hot pressing. Ceramics International.DOI
458. Xi’an Fan, Zhenzhou Rong, Fan Yang, Xinzhi Cai, Xuewu Han, Guangqiang Li (2015). Effect of process parameters of microwave activated hot pressing on the microstructure and thermoelectric properties of Bi2Te3-based alloys. Journal of Alloys and Compounds.DOI
459. Zhaoyang Wu, Xi’an Fan, Guangqiang Li, Jiaxing Wang, Zhang Hua Gan (2015). Intergranular insulated Fe-6.5 wt% Si/SiO 2 composite compacts with tunable insulating layer thickness for low core loss applications. RSC Advances.DOI
460. Jiang Ping Rao, Guangqiang Li, Zhi Zheng Yang, Yan Feng Wang (2015). Reasearch and Application of Basic Tundish Covering Flux in Continuous Casting Process in WISCO. Advanced materials research.DOI
461. 王恒辉，万响亮，李光强，王红鸿，吴开明（2014）. 低合金高强度钢焊缝针状铁素体联锁组织与性能. 《材料热处理学报》.
462. 郑万，温正勇，李光强，吴胜利，姚增远（2014）. 颗粒粒度和形貌特征对保护渣强度的影响. 《武汉科技大学学报》.
463. 杨宏伟，李光强，周耀，朱诚意（2014）. 钢包渣改质对锰在渣-钢间分配的影响. 《钢铁研究学报》.
464. 朱诚意，吴炳新，张志成，李光强，潘明旭（2014）. 轴承钢生产过程中夹杂物控制的研究进展. 《机械工程材料》.
465. 周博文，李光强，朱诚意，郑建新，付勇，张峰（2014）. 抑制剂形成元素对取向硅钢中夹杂物析出行为及热轧组织的影响. 《钢铁钒钛》.
466. 杨宏伟，苏丽娟，李光强，陈兆平，皮朝辉，周耀（2014）. 精炼渣对SUS444铁素体不锈钢中夹杂物的影响. 《炼钢》.
467. Jun Ding, Hongxi Zhu, Guangqiang Li, Chengji Deng, Jun Li (2014). Growth of SiC nanowires on wooden template surface using molten salt media. Applied Surface Science.DOI
468. Fan Yang, Xi’ an Fan, Zhenzhou Rong, Xin Cai, Guangqiang Li (2014). Lattice Thermal Conductivity Reduction Due to In Situ-Generated Nano-Phase in Bi0.4Sb1.6Te3 Alloys by Microwave-Activated Hot Pressing. Journal of Electronic Materials.DOI
469. Zhaoyang Wu, Xi’an Fan, Jian Wang, Guangqiang Li, Zhanghua Gan, Zhan Zhang (2014). Core loss reduction in Fe–6.5 wt.%Si/SiO 2 core–shell composites by ball milling coating and spark plasma sintering. Journal of Alloys and Compounds.DOI
470. Lei Lü, Xi’an Fan, Jianyi Zhang, Xiaoming Hu, Guangqiang Li, Zhan Zhang (2014). Evolution of structure and infrared radiation properties for ferrite-based amorphous coating. Applied Surface Science.DOI
471. Zhenzhou Rong, Xi’an Fan, Fan Yang, Xinzhi Cai, Guangqiang Li (2014). Microwave activated hot pressing: A new consolidation technique and its application to fine crystal bismuth telluride based compounds. Powder Technology.DOI
472. Zhi Zheng Yang, Guangqiang Li, Jiang Ping Rao, Yan Feng Wang, Cheng Hong Huang, Hong Xia (2014). Research and Application of Basic Tundish Covering Flux. Advanced materials research.DOI
473. Zhaoyang Wu, Xi’an Fan, Guangqiang Li, Zhanghua Gan, Jian Wang, Zhan Zhang (2014). Evolution from amorphous to nanocrystalline and corresponding magnetic properties of Fe-Si-B-Cu-Nb alloys by melt spinning and spark plasma sintering. Materials Science and Engineering B.DOI
474. Xi’an Fan, Xinzhi Cai, Zhenzhou Rong, Fan Yang, Guangqiang Li, Zhanghua Gan (2014). Resistance pressing sintering: A simple, economical and practical technique and its application to p-type (Bi,Sb)2Te3 thermoelectric materials. Journal of Alloys and Compounds.DOI
475. Xian Hong Chen, Chen Yi Zhu, Li Deng, Guangqiang Li (2014). Precipitation Behavior of the Second Phase Particles in Grain Oriented Silicon Steel Slabs under Different Reheating Conditions. Advanced materials research.DOI
476. Xinzhi Cai, Xi’an Fan, Zhenzhou Rong, Fan Yang, Zhanghua Gan, Guangqiang Li (2014). Improved thermoelectric properties of Bi2Te3−xSexalloys by melt spinning and resistance pressing sintering. Journal of Physics D Applied Physics.DOI
477. Guangqiang Li, Muxing Guo (2014). Current Development of Slag Valorisation in China. Waste and Biomass Valorization.DOI
478. Zhao Hui Pi, Guangqiang Li, Xiao Yan, Zhan Zhang, Zhuo Zhao, Yong Xiang Yang (2014). An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys. Advanced materials research.DOI
479. Wan Zheng, Zhenhua Wu, Guangqiang Li, Zhan Zhang, Cheng-yi Zhu (2014). Effect of Al Content on the Characteristics of Inclusions in Al–Ti Complex Deoxidized Steel with Calcium Treatment. ISIJ International.DOI
480. Zhao Yang Wu, Guangqiang Li, Xi’an Fan, Yu Meng Xu, Zhan Zhang, Xiangliang Wan (2014). Microstructure and Properties of Fe-6.5wt%Si Alloys Cores with Core-Shell Structures Prepared by Mechanical Alloying and Spark Plasma Sintering Methods. Advanced materials research.DOI
481. Zhan Zhang, Guangqiang Li, Yong Xiang Yang, Yan Ping Xiao (2014). Thermodynamics of the Vitrified Bottom Ash Slag from Municipal Solid Waste Incinerators-Phase Relations of CaO-SiO2-Na2O Oxide System. Advanced materials research.DOI
482. Guangqiang Li, Heng Hui Wang, Jian Yang, Jiang Hua (2014). Preparation of Iron Carbide from High Phosphorus Oolitic Hematite. Advanced materials research.DOI
483. 袁纲，李光强，李永军，陈兆平（2013）. 钛稳定超纯铁素体不锈钢硅铝复合脱氧的试验研究. 《钢铁研究学报》.
484. 李鹏，李光强，郑万（2013）. Al-Ti脱氧对非调质钢中MnS析出行为及组织的影响. 《钢铁研究学报》.
485. 郑万，沈星，杨运超，李光强，卢凯，屠浩，朱诚意（2013）. 250t钢包吹氩夹杂物去除的水力学模拟. 《炼钢》.
486. Zhenhua Zhang, Y. Xiao, Jack H.L. Voncken, Yannian Yang, Rob Boom, N. Wang, Zongshu Zou, Guangqiang Li (2013). Phase equilibria in the CaO·SiO2Na2O·SiO2Na2O·Al2O3·6SiO2 system. Journal of the European Ceramic Society.DOI
487. Zhi Zheng Yang, Guangqiang Li, Cheng Hong Huang, Jin Fa Ding (2013). Mn Ore Smelting Reduction Based on Double Slag Operation in BOF. Advanced materials research.DOI
488. Guangqiang Li, Bo Wen Zhou, Juergen Schneider, Rudolf Kawalla (2013). Effect of Thermal Treatment after Hot Rolling on the Microstructure of Fe-2.4wt.%Si. Materials science forum.DOI
489. Guangqiang Li, Chengyi Zhu, Yongjun Li, Huang Xiongyuan, Min Chen (2013). The Effect of Na2O and K2O on the Partition Ratio of Phosphorus between CaO–SiO2–FetO–P2O5 Slag and Carbon‐Saturated Iron. steel research international.DOI
490. Feng Zhang, Guangqiang Li (2013). Control of Ultra Low Titanium in Ultra Low Carbon Al-Si Killed Steel. Journal of Iron and Steel Research International.DOI
491. Long Zhang, J. H. Zhang, Zhang We, Guangqiang Li (2013). Thermodynamic Analysis of Extraction of Synthetic Rutile from Modified Slag. Industrial & Engineering Chemistry Research.DOI
492. Xiao Jin Hong, Xi’an Fan, Zhao Yang Wu, Guoqiang Wang, Cheng Y. Zhu, Guangqiang Li, Yan Hui Hou (2013). Preparation and Microstructure Control of One-Dimension Core-Shell Heterostructure of Te/Bi, Te/Bi2Te3 by Microwave Assisted Chemical Synthesis. Materials science forum.DOI
493. 张峰，李光强，缪乐德，朱诚意（2012）. 化学成分体系对无取向硅钢夹杂物控制的影响. 《钢铁研究学报》.
494. 朱万军，区铁，李光强，王春锋，沈继胜（2012）. 低碳低硅铝镇静钢精炼过程硅含量控制分析. 《炼钢》.
495. 杨治争，李光强，饶江平，王延峰，彭著刚，洪霞（2012）. 热轧卷表面夹杂缺陷的分析与控制. 《武汉科技大学学报》.
496. 李永军，李光强，朱诚意，樊希安（2012）. 高磷铁矿碳热还原同步脱磷的实验研究. 《武汉科技大学学报》.
497. 张帆，李光强，李永军，刘赫莉，陈兆平（2012）. 超纯铁素体不锈钢中TiN夹杂析出的热力学分析. 《武汉科技大学学报》.
498. 李伟，李光强，苏丽娟，陈兆平（2012）. VOD精炼渣的熔化过程分析及成分优化. 《武汉科技大学学报》.
499. Cheng Zhu, Jian Xin Zheng, Guangqiang Li, Wan Zheng (2012). Effect of Titanium on the Precipitating Behavior of Inclusions and Corrosion Resistance of Niobium Stabilized 409 Ferrite Stainless Steel. Advanced materials research.DOI
500. Jun Wu, Taotao Li, Ting Qi, Qingwei Qin, Guangqiang Li, Bailin Zhu, Run Wu, Changsheng Xie (2012). Influence of Dopants on Electrical Properties of ZnO-V2O5 Varistors Deduced from AC Impedance and Variable-Temperature Dielectric Spectroscopy. Journal of Electronic Materials.DOI
501. Guangqiang Li (2012). Leaching kinetics for preparation of synthetic rutile. Cailiao yu yejin xuebao.
502. 李光强，傅杰 李光强 于月光 毛新平 方克明（2011）. 基于纳米铁碳析出物的钢综合强化机理. 《中国工程科学》, Vol. 13, No. 1.下载原文
503. 廖广府，陈敏，李光强，张浩，肖尊湖，苏风光（2011）. 210t顶底复吹转炉溅渣护炉模拟研究. 《过程工程学报》.
504. 张峰，吕学钧，王波，马志刚，张毅，李光强（2011）. 稀土处理无取向硅钢中夹杂物的控制. 《钢铁钒钛》.
505. 宋春晖，黄峰，刘静，李光强，秦庆伟（2011）. pH值对X120钢在模拟鹰潭酸性土壤溶液中电化学行为的影响. 《腐蚀与防护》.
506. 张峰，马长松，王波，马志刚，张毅，李光强（2011）. 采用稀土处理去除无取向硅钢中的夹杂物. 《第八届（2011）中国钢铁年会》.
507. 王建锋，邓深，饶江平，李光强，张峰（2011）. 铌钛及铌钒钛微合金钢的高温力学性能研究. 《炼钢》.
508. 陈敏，廖广府，李光强，袁纲，肖尊湖，苏风光（2011）. 210t顶底复吹转炉水模型实验研究. 《过程工程学报》.
509. 张峰，李光强，马长松，陈晓（2011）. 非稳态浇铸无取向电工钢板坯对成品铁损的影响. 《钢铁钒钛》.
510. 杨飞，李光强，宋宇（2011）. Mn-Si-Ti-Mg复合脱氧对钢中氧化物夹杂的影响. 《钢铁钒钛》.
511. Jun Wu, Ting Qi, Taotao T. Li, Qingwei Qin, Guangqiang Li, B.L. Zhu, Zhidong D. Xiang, Changsheng Xie (2011). The AC impedance and variable temperature dielectric spectroscopic analysis of MnO2 doped and un-doped ZnO–V2O5 ceramics. Journal of Materials Science Materials in Electronics.DOI
512. Li Zhang, Guangqiang Li, Wu Zhang (2011). Synthesis of rutile from high titania slag by pyrometallurgical route. Transactions of Nonferrous Metals Society of China.DOI
513. Jiang Ping Rao, Guangqiang Li, Zhi Zheng Yang (2011). Research and Application of New Oxygen Lance for BOF Steelmaking. Advanced materials research.DOI
514. Jie Fu, Guangqiang Li, Xinping Mao, Keming Fang (2011). Nanoscale Cementite Precipitates and Comprehensive Strengthening Mechanism of Steel. Metallurgical and Materials Transactions A.DOI
515. Jianfeng Wang, Guangqiang Li, Aida Xiao (2011). A Bainite-Ferrite Multi-Phase Steel Strengthened by Ti-Microalloying. MATERIALS TRANSACTIONS.DOI
516. Xi’an Fan, Guangqiang Li, Wei Zhong, Xingkai Duan, Junyou Yang (2011). Effect of Nanopowders Addition on the Thermoelectric Properties of n-Type Bi2Te3 Nanocomposites. Integrated ferroelectrics.DOI
517. 李光强，董训祥，张帆，朱诚意（2010）. 316L不锈钢的高压增氮与脱氧研究. 《武汉科技大学学报》.
518. 张峰，李光强，陈晓，庞春敏（2010）. 炼钢工艺和成分体系对B50A1300硅钢铁损的影响. 《武汉科技大学学报》.
519. 王晓明，李光强，张艳芳，肖溦，吕洁（2010）. H2-CO-CO2气氛中添加V2O3二步法制备碳化铁的动力学分析. 《武汉科技大学学报》.
520. 马骏，沈巧珍，阳方，李光强（2010）. 底吹氩钢包内三维流场的数值模拟. 《武汉科技大学学报》.
521. 王建锋，邓深，饶江平，李光强，张峰（2010）. 钛微合金化Q345E钢的试验研究. 《钢铁钒钛》.
522. 李光强（2010）. 钢铁冶金的环保与节能. 《冶金工业出版社》.
523. 王建锋，李光强，温德智，肖爱达，邓深（2010）. 600MPa级钛微合金化高强钢的组织与性能研究. 《武汉科技大学学报》.
524. 朱诚意，谢军，柯昌明，李光强，宋宇（2010）. 钛微合金化高强度耐候钢成分设计及熔炼. 《武汉科技大学学报》.
525. Jianfeng Wang, Guangqiang Li, Ai-Da Xiao, Fu Jie (2010). Nano-Scaled Fe3C Precipitates and Precipitation Strengthening in Hot Rolled Low Carbon High Strength Titanium Microalloyed Steel. Advanced materials research.DOI
526. Yan Hui Hou, Zhiyi Liu, Guangqiang Li, Qing Kun Xia (2010). Modeling of Thermal Exposure Effect on the Microstructure Evolution and Properties of High Cu/Mg Ratio Al-Cu-Mg-Ag Alloys. Advanced materials research.DOI
527. Guangqiang Li, Ai-Da Xiao, De Zhi Wen, Guo Hua Jiao, Bai Ping Zheng, Jie Fu (2010). Study on the Production of Ti Micro-Alloyed High Strength Hot Rolled Steel by CSP Process. Materials science forum.DOI
528. 肖爱达，李光强，温德智（2009）. 残余元素对涟钢CSP热冷轧卷质量的影响. 《世界钢铁》.
529. 张晟，李光强，杨治争，王俊杰，饶江平（2009）. 结晶器内钢液流速对IF钢宽板坯表层夹杂物分布的影响. 《武汉科技大学学报》.
530. 熊玮，李光强，陈兆平，蒋晓放，杨治争（2009）. 顶底复吹转炉内锰矿直接合金化的动力学模型. 《过程工程学报》.
531. 李光强，张丽琴，秦庆伟，董训祥，朱诚意（2009）. 氮含量和环境温度对316L不锈钢耐腐蚀性的影响. 《武汉科技大学学报》.
532. 肖爱达，温德智，焦国华，郑柏平，李光强，傅杰，陈建新（2009）. 涟钢CSP Ti微合金化高强度钢的生产工艺研究. 《第七届(2009)中国钢铁年会大会论文集(中)》.
533. 陈婷，徐光，李光强，肖爱达，罗丰（2009）. 钛微合金化X70管线钢动态CCT曲线研究. 《钢铁研究》.
534. 邹航，徐光，李光强，王建峰，甘晓龙（2009）. 钛微合金化X70管线钢热变形方程的建立. 《钢铁研究》.
535. 朱诚意，李光强，陈兆平，夏幸明，刘君，董训祥（2008）. 与CaO-FetO-SiO2-MnO-P2O5渣平衡的碳饱和铁中锰含量的预测. 《武汉科技大学学报》.
536. 杨治争，李光强，刘占增，张晟，周有预（2008）. SS400热轧板结疤缺陷的成因分析. 《武汉科技大学学报》.
537. 朱诚意，李光强，陈兆平，董训祥（2008）. 锰在渣/钢之间分配平衡的热力学评估. 《武汉科技大学学报》.
538. 董廷亮，李光强（2008）. 加压感应熔炼Fe-Cr-V系高氮钢及其铝脱氧. 《钢铁研究学报》.
539. 何强，李光强，吴仕慈，马江华（2008）. V2O3、Al2O3添加剂对碳化铁生成的影响. 《钢铁钒钛》.
540. 董廷亮，李光强（2008）. 氮在Fe-Cr-V液态高氮合金中的溶解行为. 《钢铁研究学报》.
541. 李光强，郭木星，张峰，朱诚意，Bart B，Patrick W（2008）. 高氮钢相变及重熔过程的在线观察. 《武汉科技大学学报》.
542. 程常桂，李光强，帅静，陈兆平，夏幸明（2008）. “三脱”预处理铁水温降机理模型的研究. 《钢铁》.
543. 贺道中，李光强（2008）. 含铝冷镦钢连铸塞棒结瘤分析和预防工艺措施. 《特殊钢》.
544. Hongwei Ni, Hang He, Guangqiang Li, Jing Liu (2008). Preparation of nanocrystalline 430L stainless steel by HEBM and SPS. Journal of Iron and Steel Research International.DOI
545. Cheng-yi Zhu, Guangqiang Li, Zhaoping Chen, Guojun Ma, Jun Liu (2008). Manganese Distribution Equilibrium between CaO–FetO–SiO2–MnO–P2O5–(Al2O3) Slags and Carbon Saturated Iron. ISIJ International.DOI
546. Guangqiang Li (2008). Dissolution Behavior of Nitrogen in Liquid Fe-Cr-V High Nitrogen Alloy. Gangtie yanjiu xuebao.
547. Guangqiang Li (2008). Pressurized Induction Melting of Fe-Cr-V High Nitrogen Steels and Its Deoxidation With Al. Gangtie yanjiu xuebao.
548. 陈兆平，朱诚意，夏幸明，李光强，刘君（2007）. 高Fe t O铁水脱锰Cao-Fe t O-SiO 2 -MnO-P 2 O 5 （-Al 2 O 3 或 MgO）渣与碳饱和铁中磷的分配平衡. 《2007中国钢铁年会论文集》.
549. 李光强，廖继勇（2007）. 烧结烟气脱硫脱硝技术的发展与应用现状. 《2007中国钢铁年会论文集》.
550. 张鑫，刘静，李光强，彭冰（2007）. 超细晶高氮奥氏体不锈钢的制备及其性能. 《机械工程材料》.
551. 彭冰，刘静，李光强，张鑫（2007）. 氮对超细晶奥氏体不锈钢组织和性能的影响. 《钢铁钒钛》.
552. Hong Wei Ni, Hang He, Guangqiang Li, Wei Ting Zhan, Da Qiang Cang, Zhai Dan (2007). Microstructure of 430L Stainless Steel Powders during High-Energy Ball Milling. Materials science forum.DOI
553. Jing Liu, Guangqiang Li, Bing Peng, Xin Zhang (2007). Effect of Nitrogen on Structure and Properties of Ultra-Fine Austenitic Stainless Steel. Journal of Iron and Steel Research International.DOI
554. Long Zhang, Long Zhang, L.N. Zhang, L.N. Zhang, M.Y. Wang, Guangqiang Li, Z. T. Sui (2007). Precipitation selectivity of perovskite phase from Ti-bearing blast furnace slag under dynamic oxidation conditions. Journal of Non-Crystalline Solids.DOI
555. Long Zhang, L. Zhang, L.N. Zhang, L.N. Zhang, M.Y. Wang, Guangqiang Li, Z. T. Sui (2007). Recovery of titanium compounds from molten Ti-bearing blast furnace slag under the dynamic oxidation condition. Minerals Engineering.DOI
556. 张鑫，刘静，李光强（2006）. 放电等离子烧结制备超细晶奥氏体不锈钢的研究. 《钢铁钒钛》.
557. 张鑫，刘静，李光强（2006）. 机械合金化制备超细晶高氮奥氏体不锈钢粉末的探讨. 《粉末冶金工业》.
558. 朱诚意，李光强，秦庆伟（2006）. 炼钢电弧炉炉尘处理工艺进展. 《过程工程学报》.
559. 隋智通，郭振中，张力，张林楠，王明玉，娄太平，李光强（2006）. 含钛高炉渣中钛组分的绿色分离技术. 《材料与冶金学报》.
560. 朱诚意，李光强，饶江平，彭其春（2006）. 连铸薄板坯的质量缺陷及其改善措施研究. 《上海金属》.
561. Li Zhang, Linnan Zhang, Mingyu Wang, Guangqiang Li, Sui Zhitong (2006). Dynamic Oxidation of the Ti-bearing Blast Furnace Slag. ISIJ International.DOI
562. Guangqiang Li, Jianghua Ma, Hongwei Ni, Qiaozhen Shen, Fumitaka Tsukihashi (2006). Influences of Oxide Additions on Formation Reaction of Iron Carbide at 1023 K. ISIJ International.DOI
563. Guangqiang Li (2006). Determining grain size of nano-crystalline stainless steel by XRD and TEM. Southern Metals.
564. Guangqiang Li (2006). PREPARATION OF ULTRAFINE HIGH-NITROGEN STAINLESS STEEL POWDER BY MECHANICAL ALLOYING. Powder Metallurgy Industry.
565. 李光强，朱诚意，张军颖（2005）. 钢水成分传感器应用进展. 《2005中国钢铁年会》.
566. 彭其春，杨成威，张细菊，张峰，李光强，邹卫军，周春泉，周鉴（2005）. 涟源钢铁公司CSP试生产Q235B钢质量分析. 《武汉科技大学学报》.
567. 李光强，张峰，朱诚意（2005）. 1473K,0.1MPa氮气氛中Fe-Cr-Mn系不锈钢的固态渗氮. 《武汉科技大学学报》.
568. 彭其春，杨成威，李光强，朱诚意，张峰，彭觉，赵黎明（2005）. 湘钢高Al2O3高炉渣粘度研究. 《武汉科技大学学报》.
569. 张峰，李光强，彭其春，朱诚意（2005）. 转炉大补炉后第一炉钢的脱磷探讨. 《材料与冶金学报》.
570. 彭其春，杨成威，李光强，邹卫军，王宝辉，温德智（2005）. 涟钢CSP生产线LF精炼夹杂物控制探讨. 《2005中国钢铁年会论文集（第3卷）》.
571. 朱伟中，顾克井，田勇，曹建平，贾庆贤，彭其春，李光强（2003）. 转炉出钢挡渣改进实践. 《钢铁研究》.
572. 李光强，张峰，张力，隋智通（2003）. 高温碳热还原进行转炉渣资源化的研究. 《材料与冶金学报》.
573. 张力，李光强，娄太平，隋智通（2002）. 高钛渣中钛组分的选择性富集与长大. 《金属学报》.
574. 张力，李光强，隋智通（2002）. 高钛渣氧化过程的动力学. 《中国有色金属学报》.
575. 李辽沙，李光强，娄太平，车荫昌，隋智通（2000）. 电动势法研究富钛渣中低价钛氧化过程动力学. 《金属学报》.
576. 李光强，刘颖，梁连科，隋智通（1999）. 铁液中Si及Al含量的快速测定. 《金属学报》.
577. 王淑兰，李光强，隋智通（1999）. 融熔Cu-S,Fe-S/CaO-SiO2-Al2O3体系界面脱硫反应动力学的阻抗谱分析. 《金属学报》.
578. 王淑兰，李光强，隋智通（1999）. 含Ti高炉渣冷却及析晶过程中电导率的变化. 《金属学报》.
579. 王淑兰，李光强，隋智通（1998）. 熔融Sn—S/ZnCl2-NaCl体系界面脱硫反应动力学的阻抗分析. 《金属学报》.

预印本

1. Jianzhen Zhai, Guangqiang Li, Siwei Ai, Yijiang Zhao, Wen Yan, Ao Huang, Yu Liu (2026). Novel sights on corrosion mechanism of MgO-MgO·Al2O3 by high Mn steel from the view of element vaporization. SSRN Electronic Journal.DOI
2. Haojie WANG, Jianghua Ma, Yang Li, Zhiyuan Chen, Fangqin Dai, Guangqiang Li, Qiang Wang (2025). Sustainable recycling of alloy steel mill scale via tailored slag refining: a low-carbon route for in-process resource recovery. SSRN Electronic Journal.DOI
3. Jun Wu, Yunming Gao, Qiang Wang, Guangqiang Li (2025). Effect of Applied Voltage on the Wetting Behavior of MgO–SiO2 Slag on Dense MgO Substrate. SSRN Electronic Journal.DOI
4. Qiang Wang, Qi Jia, Chang Liu, Zhiyuan Chen, Guangqiang Li, Yongxiang Yang (2024). Study on Multi-Physical Fields in a Submerged-Arc Furnace for Ferroalloy Production Using a Coupled 3d Numerical Model. SSRN Electronic Journal.DOI
5. Junjie Yan, Wen Yan, Yajie Dai, Shengli Jin, Guangqiang Li, Xiao Wang (2022). Investigation of Fracture Behavior of Lightweight Magnesia-Based Refractories Using Wedge Splitting Test with Digital Image Correlation and Acoustic Emission Methods. SSRN Electronic Journal.DOI

书籍章节

1. Zhenjia Yang, Xi’an Fan, Zigui Luo, Qi Jin, Jian Wang, Zhaoyang Wu, Yawei Li, Guangqiang Li (2024). Improvement of magnetic properties in lamellar Fe based soft magnetic composites by width-thickness ratio adjustment. Journal of Materials Science Materials in Electronics.DOI
2. Yu Liu, Yong Wang, Guangqiang Li, Yuan Cheng, Ru Sheng Lu, Baokuan Li (2019). Investigation on the structure, fluoride vaporization and crystallization behavior of CaF2–CaO–Al2O3–(SiO2) slag for electroslag remelting. Journal of Thermal Analysis and Calorimetry.DOI
3. Guangqiang Li (2019). Principles of Chemical Metallurgy of Titanium Microalloyed Steel. Springer eBooks.DOI