谷诤巍｜吉林大学｜学者主页

2026

基于响应面法铝合金激光切割工艺优化与性能

李欣，李万国，郭强，谷诤巍，王俊元

《吉林大学学报(工学版)》

2026

Research progress on strengthening mechanisms and application of high-performance cold-work tool and die steels

Wenbiao Zhang, Zhengwei Gu, Hong-Yu Yang, Bai–Xin Dong, Fang Chang, Bin-Bin Wang, Huixia Xu, Shuaishuai Wang, Lin Liu, Shi–Li Shu, Deli Chen, Hai-Feng Luo, Xiao-Yu Ni, Jun Liu, Feng Qiu, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

Effect of ceramic particles on microstructure and mechanical properties of aluminium alloy resistance spot-welded joints

Yuting Lu, Jing Chen, Wanguo Li, Mei-Jie Jia, Xin Li, Zhengwei Gu

Materials & Design

DOI

2025

A study on superplastic gas bulging forming process of industrial 5083 aluminum alloy

Li-na Yi, Zhengwei Gu, Yi Li, Guo-Qing Sun

Materials Today Communications

DOI

2024

Damage behavior and performance analysis of Al5083 alloy in superplastic bulging

Li-na Yi, Zhengwei Gu, Ge Yu, Xin Li, Zi-Ming Tang, Ya-Fu Zhao

Engineering Failure Analysis

DOI

2024

Effect of Plate Thickness on the Laser-Welded Microstructure and Mechanical Properties of 22MnB5 Hot-Forming Steel

Kaixuan Sang, Xin Li, Yu Zhang, Li-na Yi, Jing Chen, Yuting Lu, Zhengwei Gu

Materials

DOI

2024

Hot Deformation Behavior and Microstructure Evolution Mechanisms of Ti6Al4V Alloy under Hot Stamping Conditions

Mingjia Qu, Zhengwei Gu, Xin Li, Li-na Yi, Yi Li, Ge Yu, Ya-Fu Zhao

Materials

DOI

2024

Finite Element Simulation and Microstructural Evolution Investigation in Hot Stamping Process of Ti6Al4V Alloy Sheets

Mingjia Qu, Zhengwei Gu, Xin Li, Jianbo Wang, Ge Yu, Li-na Yi

Materials

DOI

2024

Finite element simulation investigation of warping deformation during baking temperature cycle of dissimilar materials sandwich adhesive bonded structures of car body

Qidi Han, Xin Li, Ge Yu, Fan Dong, Zhengwei Gu

Mechanics of Advanced Materials and Structures

DOI

2023

间接热成形中预成形量对零件成形质量的影响

汤梓铭，谷诤巍，李义，李欣，于歌

《锻压技术》

DOI

2023

Investigation of Damage Model in Superplastic Condition for Aluminum Alloy

Li-na Yi, Zhengwei Gu, Zi-Ming Tang, Ge Yu, Hong-Rui Chen, Xin Li

Social Science Research Network

DOI

2023

Investigation of the Hot Stamping-in-Die Quenching Composite Forming Process of 5083 Aluminum Alloy Skin

Li-na Yi, Ge Yu, Zi-Ming Tang, Xin Li, Zhengwei Gu

Materials

DOI

2023

Microstructural evolution during superplastic deformation of commercial Al5083 alloy

Li-na Yi, Ge Yu, Zi-Ming Tang, Mingjia Qu, Xin Li, Zhengwei Gu

Materials Characterization

DOI

2023

Study on the Effect of the Pre-Forming of 22MnB5 Steel in Indirect Hot Stamping

Zi-Ming Tang, Zhengwei Gu, Yi Li, Xin Li, Ge Yu, Li-na Yi

Materials

DOI

2023

Optimization of Solution Heat Treatment Processes for AA7075-H18 Alloy Sheets

Gang Wang, Xin Li, Ge Yu, Jian J. Zhang, Wei Yan, Zhengwei Gu

Journal of materials engineering and performance (Print)

DOI

2022

7075-H18铝合金板材的淬火敏感性与等温转变行为

王刚，谷诤巍，李欣，于歌

《材料工程》

2022

Precipitates evolution of the AA7075-H18 alloy sheet during the application of the solution heat treatment process

Gang Wang, Zhengwei Gu, Ge Yu, Xin Li

Materials letters (General ed.)

DOI

2022

Theoretical Investigation of Forming Process of Aluminum Alloy Rail Vehicle Side Window

Zhengwei Gu, Hong-Rui Chen, Li-na Yi, Zi-Ming Tang, Meng-xiang Wang, Ge Yu

Materials

DOI

2022

Hot deformation characteristics and processing maps of AA7075-H18 alloy sheet under hot forming process conditions

Gang Wang, Xin Li, Ge Yu, Zhengwei Gu

Materials letters (General ed.)

DOI

2021

动车组变曲率L型截面铝合金门立柱拉弯精度控制

徐虹，刘猛，国志鹏，邹玉杰，卢睿，谷诤巍，程秀明

《哈尔滨工业大学学报》

2021

Effect of Incremental Shrinking Process on Mechanical Properties and Microstructure of Alloy through Electron Backscatter Diffraction Analysis

Zhengwei Gu, Yu-Sheng Li, Zi-Ming Tang, Ge Yu

Journal of Physics, Conference Series

DOI

2021

Investigation of the two-stage SPF process of aluminum alloy door frames

Li Yi, Xin Li, Yi Li, Ge Yu, Zi-Ming Tang, Zhengwei Gu

Journal of Materials Research and Technology

DOI

2021

Investigation of heat transfer between 22MnB5 and KDAHP1 hot work tool steel

Zi-Ming Tang, Zhengwei Gu, Gang Wang, Yu-Ting Han, Li-na Yi, Meng Xu, Yu-Sheng Li, Wenliang Hou, Ge Yu

Materials Science and Technology

DOI

2021

Quantitative Research on the Effect of Natural Aging on the Mechanical Properties and Bake Hardening Properties of AA6014 Alloy within Six Months

Zhengwei Gu, Yuting Han, Ziming Tang, Lingling Yi, Ge Yu

Metals

DOI

2020

AZ31镁合金双曲率方杯拉深成形的有限元分析及工艺优化

徐虹，张平宇，李园魁，黄钰，谷诤巍

《吉林大学学报(工学版)》

DOI

2020

轨道车辆窗下补强板冲压成形模拟

谷诤巍，陈琳，赵立辉，徐虹，李欣，于歌

《吉林大学学报(工学版)》

DOI

2020

Investigation on Fracture of a 6014-T4 Aluminum Alloy Sheet in the Flanging and Hemming Process Based on Numerical and Experimental Methods

Zhengwei Gu, Gang Wang, Ge Yu

Metals

DOI

2020

General Research on the Process of the Indirect Hot Stamping Ultra-High-Strength Steel

Zi-Ming Tang, Zhengwei Gu, Xin Li, Li-Juan Zhu, Hong Xu, Ge Yu

Metals

DOI

2019

汽车前地板成形有限元数值模拟

李欣，孙延朋，王丹，陈军绪，谷诤巍，徐虹

《吉林大学学报(工学版)》

DOI

2019

手刹固定板冲压成形数值模拟

李欣，王丹，陈军绪，孙延朋，谷诤巍，徐虹

《吉林大学学报(工学版)》

2019

Numerical analysis and experimental investigation of surface defects in die hemming process

Gang Wang, Zhengwei Gu, Hong Xu, Ge Yu

International Journal of Material Forming

DOI

2019

Stretch bending defect control of L-section SUS301L stainless-steel components with variable contour curvatures

Zhengwei Gu, Lei Jia, Xin Li, Li-Juan Zhu, Hong Xu, Ge Yu

Journal of Iron and Steel Research International

DOI

2019

Finite element simulation and experimental investigations of cold stamping forming defect of A588-A thick weathering steel bogie lower cover

Zhengwei Gu, Shi-Zhong Li, Lihui Zhao, Li-Juan Zhu, Ge Yu

The International Journal of Advanced Manufacturing Technology

DOI

2019

Research on Lightweight Design and Indirect Hot Stamping Process of the New Ultra-High Strength Steel Seat Bracket

Ziming Tang, Zhengwei Gu, Lei Chen Jia, Xin Li, Lijuan Zhu, Hong Xu, Ge Yu

Metals

DOI

2018

角型截面不锈钢型材拉弯成形起皱缺陷控制

谷诤巍，贾磊

《锻压技术》

2017

超高强度防撞梁热冲压成形工艺优化

吕萌萌，谷诤巍，徐虹，李欣

《吉林大学学报(工学版)》

2017

宽翼边U型截面不锈钢型材拉弯成形缺陷控制

谷诤巍，张文学，吕萌萌，王伟，徐虹，李欣

《吉林大学学报(工学版)》

2017

中国标准动车组前端三维蒙皮件冲压成形

谷诤巍，吕萌萌，张文学，雷娇娇，徐虹

《吉林大学学报(工学版)》

2017

双相钢DP780在循环加载-卸载过程中的非弹性回复行为及其微观机理

徐虹，刘亚楠，于婷，谷诤巍，李湘吉，张志强

《吉林大学学报(工学版)》

2016

超高强钢热成形淬火阶段的工艺参数优化

谷诤巍，吕萌萌，赵立辉，徐虹，李欣，陆冠含

《吉林大学学报(工学版)》

2016

数控拉弯工艺中型材变形量的影响因素

谷诤巍，吕萌萌，李欣，徐虹

《吉林大学学报(工学版)》

2016

Heat transfer coefficient evolution of boron steel during hot forming die quenching

Zhengwei Gu, Meng-Meng Lv, Guang-Hong Lu, H. Xu, X. Li

DOI

2016

Z断面ステンレス鋼プロフィルの引張り曲げ【Powered by NICT】

Zhengwei Gu, Meng-Meng Lu, Xin Li, Hong Xu

2016

数控拉弯プロセスにおけるプロファイル変形量の影響因子を検討した。【JST・京大機械翻訳】

Zhengwei Gu, Lyu Mengmeng, Xin Li, Hong Xu

2016

Stretch bending defects control of L-section aluminum components with variable curvatures

Zhengwei Gu, Meng-Meng Lv, Xin Li, Hong Xu

DOI

2016

Stretch Bending of Z-section Stainless Steel Profile

Zhengwei Gu, Meng-Meng Lu, Xin Li, Hong Xu

DOI

2016

Optimal Design for Cooling System of Hot Stamping Dies

Meng-Meng Lv, Zhengwei Gu, Xin Li, Hong Xu

DOI

2015

热成形淬火过程模具/板料界面接触热阻的测量计算方法概述

徐虹，杨秀臣，谷诤巍，李欣，张志强，兰博

《锻压技术》

DOI

2015

超高强度钢热成形过程中的接触热阻

徐虹，张眸睿，谷诤巍，李欣，吕萌萌，兰博

《塑性工程学报》

2015

压边力对铝合金矩形盒拉深成形质量影响的研究

谷诤巍，兰博，徐虹，李欣，魏海波，杨秀臣

《汽车工艺与材料》

2015

防撞梁热冲压模具冷却系统的数值分析及优化

谷诤巍，陆冠含，李欣，房欢欢，徐虹

《吉林大学学报(工学版)》

2015

Effect of Contact Pressure during Quenching on Microstructures and Mechanical Properties of Hot-stamping Parts

Zhengwei Gu, Meng-Meng Lu, Guang-Hong Lu, Xin Li, Hong Xu

DOI

2015

ホットスタンピング部品の微細構造と機械的性質に及ぼす焼入時の接触面圧の影響【Powered by NICT】

Zhengwei Gu, Meng-Meng Lu, Guang-Hong Lu, Xin Li, Hong Xu

2014

基于PAM-STAMP的车门防撞梁热冲压成形数值模拟

徐虹，张眸睿，谷诤巍，于婷，沈永波

《热加工工艺》

2014

热冲压成形中的先进加热技术及设备

徐虹，张眸睿，谷诤巍，李欣，朱丽娟，吕萌萌，张志强

《锻压技术》

DOI

2014

顶端板拉深回弹控制与影响因素分析

徐虹，仝晓辉，谷诤巍，于婷

《模具工业》

2014

模具间隙对复杂截面纵梁件成形回弹的影响研究

郑勇福，徐虹，于婷，谷诤巍，张眸睿，卢睿，吕萌萌

《模具工业》

2014

22MnB5热成形钢板钨极氩弧焊接性能

李欣，王刚，陆冠含，谷诤巍，徐虹

《吉林大学学报(工学版)》

2014

基于材料性能梯度分布法提高轿车B柱耐撞性

谷诤巍，贾迎婷，徐虹，李欣

《汽车工艺与材料》

2014

Modeling of Microstructure Evolution in 22MnB5 Steel during Hot Stamping

Li-Juan Zhu, Zhengwei Gu, Hong Xu, Yi Lu, J. Chao

DOI

2014

Investigation on Hot Stamping Process for Door Beam of Ultra-High Strength Steel

Hong Xu, Mou-Rui Zhang, Zhengwei Gu, Xin Li

2013

超高强钢热冲压硬化机理

朱丽娟，谷诤巍，吕义，徐虹

《吉林大学学报(工学版)》

2013

侧立柱冲压成形截面开口尺寸精度控制方法研究

徐虹，马东，谷诤巍，李欣

《模具工业》

2013

Mechanism of hot stamping hardening for ultra-high strength steel

Zhengwei Gu

2012

基于CAE的后纵梁加强板轻量化研究

徐虹，夏丁，谷诤巍，赵忠民

《汽车技术》

2012

角型截面铝型材拉弯成形工艺模拟研究

谷诤巍，赵立辉，徐虹，崔波

《电加工与模具》

2012

铝型材弯曲成形截面畸变缺陷控制方法研究

谷诤巍，吕萌萌，卢睿，徐勇，朱丽娟

《汽车工艺与材料》

2012

超高强度钢与低合金钢的激光搭接焊性能

谷诤巍，于思彬，韩立军，孟佳，徐虹

《吉林大学学报(工学版)》

2012

激光焊接速度对超高强度钢焊缝微观组织和显微硬度的影响

谷诤巍，于思彬，韩立军，孟佳，沈永波，徐虹

《吉林大学学报(工学版)》

2012

Influence of Welding Speed on Microstructures and Properties of Ultra-high Strength Steel Sheets in Laser Welding

Zhengwei Gu, Sibin Yu, Li-Jun Han, Xin Li, Hong Xu

DOI

2011

超高强度钢车门防撞梁冷冲压数值模拟研究

徐虹，吕萌萌，赵立辉，谷诤巍

《汽车工艺与材料》

2011

22MnB5钢热冲压高温防氧化涂层

徐虹，孟佳，谷诤巍，崔波

《汽车技术》

2011

超高强钢热成形奥氏体化加热参数的优化

谷诤巍，孟佳，李欣，徐虹，于思彬，沈永波

《吉林大学学报(工学版)》

2011

汽车超高强钢防撞梁热成形试验

徐虹，沈永波，谷诤巍，孟佳，于思彬，李欣

《吉林大学学报(工学版)》

2011

Method for locally heating and forming high-strength steel

Xiao-Hui Tong, Hong Xu, Yong Shen, Zhengwei Gu, Sheng Zheng

2011

Microstructures and Properties of Ultra-high Strength Steel by Laser Welding

Zhengwei Gu, Sibin Yu, Li-Jun Han, J. Meng, Hong Xu, Zheng-Lin Zhang

DOI

2011

Study on microstructure and properties of hot stamping door anti-impact beam

Xu Hong, Shen Yong-bo, Jia Meng, Xin Li, Zhengwei Gu

Duanya jishu

2010

超高强淬火钢板中频点焊接头组织与断口形貌

韩立军，谷诤巍，张正林

《焊接学报》

2010

帽形截面冷冲压件的回弹分析及补偿

谷诤巍，蔡中义，徐虹，张正林，张志强

《清华大学学报(自然科学版)》

2010

超高强度钢板冲压件的激光点焊性能

谷诤巍，张正林，于鸣，韩立军，沈永波

《吉林大学学报(工学版)》

2010

高强度钢板冷冲压成形数值模拟研究

谷诤巍，徐勇，程万军，单忠德，姜超

《汽车工艺与材料》

2009

拉弯成形的数值分析与工艺优化

谷诤巍，蔡中义，徐虹

《吉林大学学报(工学版)》

2009

基于位移控制的型材2D张臂式拉弯加载轨迹设计及数控代码生成

金朝海，周贤宾，谷诤巍，赵亚夫

《塑性工程学报》

2009

基于摄动法的拉弯成形工艺分析

谷诤巍，蔡中义，徐虹

《清华大学学报(自然科学版)》

2009

超高强度钢与微合金钢点焊接头的组织与性能

谷诤巍，张正林，李欣，韩立军，徐虹

《吉林大学学报(工学版)》

2009

超高强度钢板中频点焊力学性能

谷诤巍，张正林，韩立军，徐虹，李欣

《吉林大学学报(工学版)》

2009

基于PS2F软件的型材拉弯成形工艺研究

谷诤巍，徐虹，赵立辉，崔波

《电加工与模具》

2009

超高强度钢板冲压件热成形工艺

谷诤巍，姜超，单忠德，徐虹

《汽车工艺与材料》

2009

轨道车辆侧柱成形缺陷数值分析

谷诤巍，赵立辉，徐虹，张志强

《模具工业》

2009

汽车高强度钢板冲压件热成形技术研究

谷诤巍，单忠德，徐虹，姜超

《模具工业》

2009

Intermediate Frequency Spot Welding Performance Investigation of Precision Ultra-high Strength Quenching Steel Plate

Zhengwei Gu, Z.-L. Zhang, Li-Jun Han, Hong Xu

DOI

2008

中频点焊技术在一汽大众焊装车身制造中的应用与发展

韩立军，张正林，谷诤巍

《金属加工(热加工)》

2008

TRAJECTORY DESIGN OF JAWS FOR DISPLACEMENT CONTROLLED PROFILE 2D STRETCH-WRAP BENDING

Chao-Hai Jin, X.-B. Zhou, Zhengwei Gu, Ya-Fu Zhao

2007

轨道车辆车体侧立柱冲压成形工艺研究

谷诤巍，王锋，刘志泰，赵亚夫

《机车车辆工艺》

2007

轨道车辆不锈钢车顶弯梁拉弯成形技术

王锋，谷诤巍，刘玉梅，刘志泰，赵亚夫

《机车车辆工艺》

2006

不锈钢型材拉弯成形工艺模拟研究

谷诤巍，刘化民，刘玉梅，刘志泰，郑勇福

《模具工业》

2006

发动机连杆裂解工艺与装备

谷诤巍，姚卫国

《制造技术与机床》

2006

圆锥齿轮闭塞冷锻后的性能变化规律研究

刘化民，谷诤巍，程万军，黄良驹

《锻压装备与制造技术》

2006

Simulation of stretch bending forming process of stainless section steel

Zhengwei Gu

2005

Fracture splitting technology of automobile engine connecting rod

Zhengwei Gu, S. Yang, S. Ku, Y. Zhao, X. Dai

DOI

2003

发动机连杆裂解加工工艺

谷诤巍

《新技术新工艺》

2001

内燃机连杆制造最新技术与发展趋势

寇淑清，金文明，谷诤巍，杨慎华

《内燃机工程》

2001

体积成形数值模拟边界接触摩擦与滑动约束处理

寇淑清，金文明，谷诤巍

《锻压装备与制造技术》

2001

薄壳成型技术

谷诤巍，付沛福

《合成树脂及塑料》

2000

发动机连杆裂解加工新技术

杨慎华，寇淑清，谷诤巍，金文明，赵勇

《哈尔滨工业大学学报》

1999

汽车变截面板簧精密成形自动化装置研究

杨慎华，谷诤巍，寇淑清，付沛福

《锻压装备与制造技术》

精选作品

期刊论文

基于响应面法铝合金激光切割工艺优化与性能

Research progress on strengthening mechanisms and application of high-performance cold-work tool and die steels

Effect of ceramic particles on microstructure and mechanical properties of aluminium alloy resistance spot-welded joints

A study on superplastic gas bulging forming process of industrial 5083 aluminum alloy

Damage behavior and performance analysis of Al5083 alloy in superplastic bulging

Effect of Plate Thickness on the Laser-Welded Microstructure and Mechanical Properties of 22MnB5 Hot-Forming Steel

Hot Deformation Behavior and Microstructure Evolution Mechanisms of Ti6Al4V Alloy under Hot Stamping Conditions

Finite Element Simulation and Microstructural Evolution Investigation in Hot Stamping Process of Ti6Al4V Alloy Sheets

Finite element simulation investigation of warping deformation during baking temperature cycle of dissimilar materials sandwich adhesive bonded structures of car body

间接热成形中预成形量对零件成形质量的影响

Investigation of Damage Model in Superplastic Condition for Aluminum Alloy

Investigation of the Hot Stamping-in-Die Quenching Composite Forming Process of 5083 Aluminum Alloy Skin

Microstructural evolution during superplastic deformation of commercial Al5083 alloy

Study on the Effect of the Pre-Forming of 22MnB5 Steel in Indirect Hot Stamping

Optimization of Solution Heat Treatment Processes for AA7075-H18 Alloy Sheets

7075-H18铝合金板材的淬火敏感性与等温转变行为

Precipitates evolution of the AA7075-H18 alloy sheet during the application of the solution heat treatment process

Theoretical Investigation of Forming Process of Aluminum Alloy Rail Vehicle Side Window

Hot deformation characteristics and processing maps of AA7075-H18 alloy sheet under hot forming process conditions

动车组变曲率L型截面铝合金门立柱拉弯精度控制

Effect of Incremental Shrinking Process on Mechanical Properties and Microstructure of Alloy through Electron Backscatter Diffraction Analysis

Investigation of the two-stage SPF process of aluminum alloy door frames

Investigation of heat transfer between 22MnB5 and KDAHP1 hot work tool steel

Quantitative Research on the Effect of Natural Aging on the Mechanical Properties and Bake Hardening Properties of AA6014 Alloy within Six Months

AZ31镁合金双曲率方杯拉深成形的有限元分析及工艺优化

轨道车辆窗下补强板冲压成形模拟

Investigation on Fracture of a 6014-T4 Aluminum Alloy Sheet in the Flanging and Hemming Process Based on Numerical and Experimental Methods

General Research on the Process of the Indirect Hot Stamping Ultra-High-Strength Steel

汽车前地板成形有限元数值模拟

手刹固定板冲压成形数值模拟

Numerical analysis and experimental investigation of surface defects in die hemming process

Stretch bending defect control of L-section SUS301L stainless-steel components with variable contour curvatures

Finite element simulation and experimental investigations of cold stamping forming defect of A588-A thick weathering steel bogie lower cover

Research on Lightweight Design and Indirect Hot Stamping Process of the New Ultra-High Strength Steel Seat Bracket

角型截面不锈钢型材拉弯成形起皱缺陷控制

超高强度防撞梁热冲压成形工艺优化

宽翼边U型截面不锈钢型材拉弯成形缺陷控制

中国标准动车组前端三维蒙皮件冲压成形

双相钢DP780在循环加载-卸载过程中的非弹性回复行为及其微观机理

超高强钢热成形淬火阶段的工艺参数优化

数控拉弯工艺中型材变形量的影响因素

Heat transfer coefficient evolution of boron steel during hot forming die quenching

Z断面ステンレス鋼プロフィルの引張り曲げ【Powered by NICT】

数控拉弯プロセスにおけるプロファイル変形量の影響因子を検討した。【JST・京大機械翻訳】

Stretch bending defects control of L-section aluminum components with variable curvatures

Stretch Bending of Z-section Stainless Steel Profile

Optimal Design for Cooling System of Hot Stamping Dies

热成形淬火过程模具/板料界面接触热阻的测量计算方法概述

超高强度钢热成形过程中的接触热阻

压边力对铝合金矩形盒拉深成形质量影响的研究

防撞梁热冲压模具冷却系统的数值分析及优化

Effect of Contact Pressure during Quenching on Microstructures and Mechanical Properties of Hot-stamping Parts

ホットスタンピング部品の微細構造と機械的性質に及ぼす焼入時の接触面圧の影響【Powered by NICT】

基于PAM-STAMP的车门防撞梁热冲压成形数值模拟

热冲压成形中的先进加热技术及设备

顶端板拉深回弹控制与影响因素分析

模具间隙对复杂截面纵梁件成形回弹的影响研究

22MnB5热成形钢板钨极氩弧焊接性能

基于材料性能梯度分布法提高轿车B柱耐撞性

Modeling of Microstructure Evolution in 22MnB5 Steel during Hot Stamping

Investigation on Hot Stamping Process for Door Beam of Ultra-High Strength Steel

超高强钢热冲压硬化机理

侧立柱冲压成形截面开口尺寸精度控制方法研究

Mechanism of hot stamping hardening for ultra-high strength steel

基于CAE的后纵梁加强板轻量化研究

角型截面铝型材拉弯成形工艺模拟研究

铝型材弯曲成形截面畸变缺陷控制方法研究

超高强度钢与低合金钢的激光搭接焊性能

激光焊接速度对超高强度钢焊缝微观组织和显微硬度的影响

Influence of Welding Speed on Microstructures and Properties of Ultra-high Strength Steel Sheets in Laser Welding

超高强度钢车门防撞梁冷冲压数值模拟研究

22MnB5钢热冲压高温防氧化涂层

超高强钢热成形奥氏体化加热参数的优化

汽车超高强钢防撞梁热成形试验

Method for locally heating and forming high-strength steel

Microstructures and Properties of Ultra-high Strength Steel by Laser Welding

Study on microstructure and properties of hot stamping door anti-impact beam

超高强淬火钢板中频点焊接头组织与断口形貌