雷洪

期刊论文

1. 张爽，赵岩，孙乙力，游皓宇，秦宏伟，雷洪（2026）. 钢包号的智能识别. 《炼钢》.
2. 孙乙力，雷洪，李泽奇，姜媛馨，张晗，赵岩（2026）. 基于注意力门控双头U-Net的板坯结晶器流场快速预测. 《金属学报》.
3. 莫瑷玮，张爽，雷洪，余翔，郭金溥，马毓（2026）. 钢包号的多目标智能识别. 《工业加热》.
4. Shifu Chen, Z. G. Chen, Hong Lei, Pengfei Wu (2026). Gas–Liquid Flow Dynamics in Single-Snorkel Refining Furnaces: A Combined Physical and Numerical Study. JOM.DOI
5. Lei Zhang, Shifu Chen, Hong Lei, Haoyu Ling (2026). Transient Coupled Modeling of Multiphase Flow and Decarburization Kinetics in RH with Ladle Bottom-Blowing. Metals.DOI
6. Yili Sun, Hong Lei, Changyou Ding, Yuanxin Jiang, Haoyu You, Yan Zhao (2026). AUNet-CFD: Rapid Surrogate Modeling for Isothermal Single-Phase Flow in a Tundish with a Dam. Metallurgical and Materials Transactions B.DOI
7. Hao-Yu You, Hong Lei, Han Zhang, Shuang Zhang, Yuan-Xin Jiang, Yi-Li Sun (2026). Bubble expansion behavior in Ruhrstahl-Heraeus degasser. Vacuum.DOI
8. Shifu Chen, Zhengzheng Chen, Bin Yang, Han Zhang, Hong Lei (2026). Research on fluid flow and heat transfer in electromagnetic induction heating RH. Case Studies in Thermal Engineering.DOI
9. Changyou Ding, Hong Lei, Han Zhang, Yili Sun, Yuanxin Jiang (2026). A New Analysis Method for Flow Field and Inclusion Behavior in a Tundish With Channel‐Type Induction Heater. steel research international.DOI
10. Yuanxin Jiang, Hong Lei, Yili Sun, Denghui Li, Tianyu Zhang, Meng Qu (2026). Mechanistic and Data-Driven Hybrid Model for RH Decarburization Process. JOM.DOI
11. 吾塔，赵亮，雷洪（2025）. 基于微合金化与控轧工艺的Q350光伏支架钢成分设计与性能优化. 《新疆钢铁》.DOI
12. 曾帅，姜媛馨，张晗，孙乙力，罗洪杰，雷洪（2025）. RH真空精炼的发展现状和展望. 《炼钢》.
13. 李兴达，赵岩，张红伟，何江一，韩信，雷洪（2025）. 不同电流模式下电渣重熔的电磁特性. 《材料与冶金学报》.DOI
14. 陈从俊，张开，雷洪（2025）. 电磁搅拌辊下连铸机内磁场、流场和凝固行为. 《工业加热》.
15. 李登辉，赵岩，雷洪，范佳（2025）. RH终点钢液碳质量分数的智能预测. 《东北大学学报(自然科学版)》.
16. Jingyue Liang, Shifu Chen, Bin Yang, Yuanyou Xiao, Hu Dai, Pengfei Wu, Hong Lei (2025). Analysis of electromagnetic environment characteristics in RH with electromagnetic induction heating. Journal of Materials Research and Technology.DOI
17. Han Zhang, Hong Lei, Changyou Ding, Yan Zhao, Denghui Li, Tianyu Zhang (2025). Relation Between RTD Curve and Inclusion Removal in the Tundish. Metallurgical and Materials Transactions B.DOI
18. Yili Sun, Hong Lei, Changyou Ding, Haoyu You, Qiang Li, Yan Zhao (2025). Generative Flow Field in the Tundish by UNet-CFD Architecture with LEI Dataset. Metallurgical and Materials Transactions B.DOI
19. Han Zhang, Hong Lei, Yuanxin Jiang, Yili Sun, Shuai Zeng, Shifu Chen (2025). Prediction of Multiphase Flow in Ruhrstahl–Heraeus (RH) Reactor. Materials.DOI
20. 董士虎，张红伟，吕文朋，雷洪，王强（2024）. 基于界面追踪-动网格技术模拟凝固收缩下Fe-C合金宏观偏析. 《金属学报》.
21. 张倩玉，陈艳华，丛郁锬，雷洪，杜官本，席雪冬（2024）. 蔗糖改性小桐子蛋白胶黏剂性能研究. 《西南林业大学学报(自然科学)》.
22. 张秀香，曲广煦，王亚东，雷洪，卢秉军（2024）. 气保焊丝用热轧盘条ER50-6“毛刺”原因分析. 《金属世界》.
23. 张俊，雷洪（2024）. 生物质基胶黏剂的研究进展. 《中国人造板》.
24. 赵岩，雷洪（2024）. 混铁车内衬优化后铁水温度变化分析. 《冶金能源》.
25. 何江一，赵岩，吕璞，雷洪（2024）. 电渣重熔过程熔滴演化的数值模拟分析. 《中国冶金》.
26. Shifu Chen, Bin Yang, Yuanyou Xiao, Hong Lei (2024). Inclusion Transfer Phenomenon under Unsteady Multiphase Flow during Rheinstahl–Heraeus Vacuum Treatment Process. steel research international.DOI
27. Bin Yang, Shifu Chen, Hong Lei, Dazhao Gou (2024). Numerical Simulation of Multi-physics Characteristics in Tundish with Channel Induction Heating. Metallurgical and Materials Transactions B.DOI
28. Bin Yang, Hong Lei, Dazhao Gou (2024). Numerical Simulation of Inclusion Collision Growth and Removal in a Tundish with Intermittent Induction Heating. JOM.DOI
29. Changyou Ding, Hong Lei, Han Zhang, Yuanyou Xiao, Yan Zhao, Zongshu Zou (2024). New Understanding on Relationship Between RTD Curve and Inclusion Behavior in the Tundish. Metallurgical and Materials Transactions B.DOI
30. Hongwei Zhang, Hong Lei, Yuanyou Xiao, Guocheng Wang, Daxian Zhang (2024). Atomic-scale nucleation pathways of MgAl2O4 particle in molten steel. Computational and Theoretical Chemistry.DOI
31. Yuanyou Xiao, Lei Cao, Guocheng Wang, Ximin Zang, Hong Lei, Hongwei Zhang, Daxian Zhang (2024). Effect of Cooling Conditions on the Size and Morphology Evolution of MgAl2O4 Inclusions in Al‐Deoxidized Steel Coupling with Mg Treatment. steel research international.DOI
32. 柴宝堂，雷洪，徐猛，赵岩（2023）. 基于BP神经网络的RH精炼终点钢液温度预测. 《炼钢》.
33. 侯汉闯，雷洪，陈士富，杨滨，张晗，丁长友（2023）. 电磁软接触方坯连铸凝固过程夹杂物碰撞长大行为. 《炼钢》.
34. 席雪冬，张倩玉，陈实，曹龙，杜官本，雷洪（2023）. 非异氰酸酯聚氨酯合成原理及应用研究进展. 《林业工程学报》.
35. 陈艳华，丛郁锬，徐高翔，雷洪，席雪冬，杜官本（2023）. 氧化法制备小桐子蛋白胶黏剂及其交联改性研究. 《西南林业大学学报(自然科学)》.
36. 邓雪，ZHANG Bengang，LIANG Jiankun，LI Lifen，吴志刚，雷洪 (2023). The Crosslinking Mechanism of Camellia Oleifera Protein Adhesive with Amine Resins by13C-NMR and ESI-MS. Journal of Wuhan University of Technology(Materials Science).
37. 徐猛，雷洪，何江一，韩信，王兴华，王燕斌（2023）. 利用改进XGBoost预测RH精炼终点钢水温度. 《材料与冶金学报》.
38. 曹龙，LIANG Jiankun，ZHANG Qiaoyan，XI Xuedong，吴志刚，雷洪 (2023). Crosslinking Mechanism of Soy Protein-based Adhesives based on Glyoxal and a Compound of Protein Model. Journal of Wuhan University of Technology(Materials Science).
39. 徐猛，刘娟娟，雷洪，李强，张秀香（2023）. 基于鲸鱼算法优化BP神经网络的结晶器液面波动的预测. 《冶金自动化》.
40. 雷洪，赵岩（2023）. 电磁冶金学中的电磁问题. 《中国冶金教育》.
41. Yuanyou Xiao, Lei Cao, Guocheng Wang, Hong Lei, Zhuo Zhao, Yi Ren (2023). Nanoscale nucleation and growth of MgAl2O4 inclusion in Al-Mg deoxidized steel. Journal of Alloys and Compounds.DOI
42. Changyou Ding, Hong Lei, Han Zhang, Meng Xu, Yan Zhao, Qiang Li (2023). New insight into relationship between casting speed and inclusion removal in the tundish. Journal of Materials Research and Technology.DOI
43. Han Zhang, Hong Lei, Changyou Ding, Shifu Chen, Yuanyou Xiao, Qiang Li (2023). Two-Way PBM–Euler Model for Gas and Liquid Flow in the Ladle. Materials.DOI
44. Hong Lei, Juanjuan Liu, Guofeng Tang, Hongwei Zhang, Z.D. Jiang, Pu Lv (2023). Deep Insight into Mold Level Fluctuation During Casting Different Steel Grades. JOM.DOI
45. 陈艳华，丛郁锬，杜官本，董春雷，雷洪，万辉（2022）. 正交胶合木生产工艺研究进展. 《四川林业科技》.
46. 陈实，席雪冬，宋佳璇，练仕官，雷洪（2022）. 山梨醇基非异氰酸酯聚氨酯胶黏剂的制备与表征. 《林业工程学报》.
47. 宋佳璇，田珩，雷洪，徐高翔，王镜淞，普蕾，陈庆（2022）. 纳米二氧化锰改性脲醛树脂胶黏剂试验. 《林业工程学报》.
48. 丛郁锬，陈艳华，席雪冬，杜官本，徐高翔，雷洪（2022）. 多胺基聚合物改性室温固化型MUF树脂胶黏剂. 《林业工程学报》.
49. 普蕾，雷洪，田珩，操晟晨，张玉鹏，劳永林，陈保森（2022）. 乙二醛-尿素-甲醛树脂耐水性研究. 《中国胶粘剂》.
50. Changyou Ding, Hong Lei, Shifu Chen, Han Zhang, Yan Zhao, Zongshu Zou (2022). Challenge of Residence Time Distribution Curve in Tundish for Continuous Casting of Steel. steel research international.DOI
51. Han Zhang, Hong Lei, Changyou Ding, Shifu Chen, Hong Niu, Bin Yang (2022). Deep Insight into the Pinch Effect in a Tundish with Channel‐Type Induction Heater. steel research international.DOI
52. Bin Yang, Kun Liu, Hong Lei, Peng Han (2022). Structure optimization of continuous casting tundish with channel-type induction heating using mathematical modeling. High Temperature Materials and Processes.DOI
53. Lei Fang, Tianyu Liu, Yahe Huang, Weiqin Wu, Wei Feng, Hong Lei (2022). Numerical Simulation for Magnetohydrodynamic Flow and Solidification in an Ultra-wide Slab Continuous Caster with Electromagnetic Stirring Roller. ISIJ International.DOI
54. Shifu Chen, Hong Lei, Qiang Li, Changyou Ding, Weixue Dou, Lishan Chang (2022). Effect of Nonequilibrium Decarburization on Inclusion Transfer During Single Snorkel RH Vacuum Refining. JOM.DOI
55. 冯苗苗，张红伟，邵景霞，李铁，雷洪，王强（2021）. 耦合热力学相变路径预测Fe-C包晶合金宏观偏析. 《金属学报》.
56. 战东平，杨永坤，姜周华，雷洪（2021）. 加热过程钢中夹杂物演变的研究进展. 《钢铁》.DOI
57. Bin Yang, Hong Lei, Yingshi Xu, Kun Liu, Peng Han (2021). Numerical Investigation of Flow Characteristics of Molten Steel in the Tundish with Channel Induction Heating. Metals.DOI
58. Shifu Chen, Hong Lei, Hanchuang Hou, Changyou Ding, Han Zhang, Yan Zhao (2021). Collision-coalescence among inclusions with bubble attachment and transport in molten steel of RH. Journal of Materials Research and Technology.DOI
59. Chunlei Wu, Xiaoming Liu, Qiang Wang, Ming Yuan He, Xiaowei Zhu, Dewei Li, Lijia Zhao, Hong Lei (2021). Macrosegregation Prediction by Evaluating Liquid Level Fluctuation in Round Billet Continuous Casting with Electromagnetic Nozzle Swirling Flow. Metallurgical and Materials Transactions B.DOI
60. Changyou Ding, Hong Lei, Hong Niu, Han Zhang, Bin Yang, Qiang Li (2021). Effects of Tracer Solute Buoyancy on Flow Behavior in a Single-Strand Tundish. Metallurgical and Materials Transactions B.DOI
61. Shifu Chen, Hong Lei, Meng Wang (2021). Interaction between CO–Ar–Molten Steel Flow and Decarburization Reaction in Rheinstahl–Heraeus. steel research international.DOI
62. Chunlei Wu, Dewei Li, Xiaowei Zhu, Hong Shi, Xiaoming Liu, Lijia Zhao, Hong Lei, Qiang Wang (2021). Experimental Study of Macrostructure and Segregation by a Novel Electromagnetic Nozzle Swirling Flow Combined with Electromagnetic Stirring in Continuous Casting. Metallurgical and Materials Transactions B.DOI
63. Changyou Ding, Hong Lei, Hong Niu, Han Zhang, Bin Yang, Yan Zhao (2021). Effects of Salt Tracer Volume and Concentration on Residence Time Distribution Curves for Characterization of Liquid Steel Behavior in Metallurgical Tundish. Metals.DOI
64. Shifu Chen, Hong Lei, Meng Wang, Changyou Ding, Weixue Dou, Lishan Chang (2021). Turbulent flow with nonequilibrium chemical reaction in single snorkel RH. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
65. Weixian Wang, Hongwei Zhang, Keiji Nakajima, Hong Lei, Guofeng Tang, Xinghua Wang, Wangzhong Mu, Maofa Jiang (2021). Prediction of Final Solidification Position in Continuous Casting Bearing Steel Billets by Slice Moving Method Combined with Kobayashi Approximation and Considering MnS and Fe3P Precipitation. ISIJ International.DOI
66. 蹇玉兰，吴志刚，曹龙，张本刚，雷洪，徐高翔（2020）. 聚乙二醇改性三聚氰胺-尿素-甲醛树脂的研究. 《西南林业大学学报(自然科学)》.
67. 李钢，雷洪（2020）. 八钢高线生产Ф12.5mm 82B工艺分析. 《新疆钢铁》.
68. 张晛韦，张红伟，雷洪，王强（2020）. 球墨铸铁离异共晶凝固组织生长模拟. 《钢铁研究学报》.DOI
69. Weixian Wang, Shifu Chen, Hong Lei, Hongwei Zhang, Hongjin Xiong, Maofa Jiang (2020). Inclusion Behavior in a Curved Bloom Continuous Caster with Mold Electromagnetic Stirring. Metals.DOI
70. Hong Lei, Yuanyou Xiao, Guocheng Wang, Hongwei Zhang, Wei Jin, Lifeng Zhang (2020). Thermodynamic insight into the growth of nanoscale inclusion of Al-deoxidation in Fe–O–Al melt. Scientific Reports.DOI
71. Chunlei Wu, Qiang Wang, Dewei Li, Xiaowei Zhu, Baigang Jin, Lianyu Wang, Hong Lei (2020). Macrosegregation under new flow pattern and temperature distribution induced by electromagnetic swirling flow in nozzle during continuous casting of square billet. Journal of Materials Research and Technology.DOI
72. H W Zhang, Shaowei Zhang, Y C Wang, Y Z Hao, M Miao, Keiji Nakajima, Hong Lei, Q Wang, Jin He (2020). Cellular automaton modelling of M7C3 carbide growth during solidification of Fe-C-Cr alloy. IOP Conference Series Materials Science and Engineering.DOI
73. 吴春雷，李德伟，朱晓伟，王强，Oleksandr Tretiak，雷洪（2019）. 电磁旋流水口连铸技术对小方坯凝固组织形貌和宏观偏析的影响. 《金属学报》.
74. 梁坚坤，李利芬，吴志刚，雷洪，张本刚，王璇（2019）. 蓝藻蛋白基胶黏剂的制备与应用. 《西南林业大学学报(自然科学)》.
75. 李钢，陈海军，雷洪，李果（2019）. ∮12mm30MnSi盘条的研制. 《新疆有色金属》.DOI
76. Shifu Chen, Hong Lei, Meng Wang, Bin Yang, Weixue Dou, Lishan Chang, Hongwei Zhang (2019). Ar-CO-liquid steel flow with decarburization chemical reaction in single snorkel refining furnace. International Journal of Heat and Mass Transfer.DOI
77. Yuanyou Xiao, Guocheng Wang, Hong Lei, Seetharaman Sridhar (2019). Formation pathways for MgO·Al2O3 inclusions in iron melt. Journal of Alloys and Compounds.DOI
78. Bin Yang, Hong Lei, Yan Zhao, Guocheng Xing, Hongwei Zhang (2019). Quasi-Symmetric Transfer Behavior in an Asymmetric Two-Strand Tundish with Different Turbulence Inhibitor. Metals.DOI
79. Hong Lei, Bin Yang, Qian Bi, Yuanyou Xiao, Shifu Chen, Changyou Ding (2019). Numerical Simulation of Collision-Coalescence and Removal of Inclusion in Tundish with Channel Type Induction Heating. ISIJ International.DOI
80. Shifu Chen, Hong Lei, Meng Wang, Bin Yang, Lijun Dai, Yan Zhao (2019). Two-way coupling calculation for multiphase flow and decarburization during RH refining. Vacuum.DOI
81. Yuanyou Xiao, Hong Lei, Hongwei Zhang, Guocheng Wang, Qi Wang, Wei Jin (2019). Structural evolution of calcia during calcium deoxidation in Fe–O–Ca melt. Physical Chemistry Chemical Physics.DOI
82. Yuanyou Xiao, Hong Lei, Bin Yang, Yang Zhao, Qi Wang, Guocheng Wang (2019). Thermodynamic insight into the growth of calcia inclusions at the nanoscale: the case of Fe–O–Ca melt. RSC Advances.DOI
83. Lei Cao, Guocheng Wang, Yang Zhao, Seetharaman Sridhar, Hong Lei (2019). MgAl2O4 Inclusion Agglomeration on the Surface of Liquid Steel. Metallurgical and Materials Transactions B.DOI
84. Hongwei Zhang, Keiji Nakajima, Mengmeng Su, Shaoshao Gao, Hong Lei, Qiang Wang, Jicheng He (2019). Prediction of Carbide Precipitation Using A Combined Partial Equilibrium - Para-Equilibrium - Lever Rule Approximation in Automobile Gear Materials. IOP Conference Series Materials Science and Engineering.DOI
85. Yuanyou Xiao, Hong Lei, Bin Yang, Guocheng Wang, Qi Wang, Wei Jin (2019). Thermodynamic Modelling on Nanoscale Growth of Magnesia Inclusion in Fe-O-Mg Melt. Metals.DOI
86. 张本刚，席雪冬，吴志刚，雷洪，杜官本，王辉（2018）. 处理单宁改性脲醛树脂性能研究. 《西南林业大学学报(自然科学)》.
87. Qianren Tian, Guocheng Wang, Deli Shang, Hong Lei, Xinghu Yuan, Qi Wang, Jing Li (2018). In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel. Metallurgical and Materials Transactions B.DOI
88. Yang Zhao, Guocheng Wang, Deli Shang, Hong Lei, Qi Wang, Lei Cao (2018). Mechanisms on Superfine Alumina Inclusions Formation by Al‐Deoxidation Reaction for liquid Iron. steel research international.DOI
89. Bin Yang, Hong Lei, Qian Bi, Jimin Jiang, Hongwei Zhang, Yan Zhao, Jianan Zhou (2018). Fluid Flow and Heat Transfer in a Tundish with Channel Type Induction Heating. steel research international.DOI
90. Bin Yang, Hong Lei, Qian Bi, Jimin Jiang, Hongwei Zhang, Yan Zhao, Jianan Zhou (2018). Electromagnetic Conditions in a Tundish with Channel Type Induction Heating. steel research international.DOI
91. Yuanyou Xiao, Hong Lei, Bin Yang, Guocheng Wang, Qi Wang, Wei Jin (2018). Nucleation and growth for magnesia inclusion in Fe–O–Mg melt. RSC Advances.DOI
92. Bin Yang, Hong Lei, Qian Bi, Yuanyou Xiao, Yan Zhao (2018). Numerical Simulation of Collision-Coalescence and Removal of Inclusions in a Tundish. JOM.DOI
93. Hongwei Zhang, Keiji Nakajima, Mengmeng Su, Hiroyuki Shibata, Peter Hedström, Weixian Wang, Hong Lei, Qiang Wang, Pär G. Jönsson, Jicheng He (2018). Prediction of Influences of Co, Ni, and W Elements on Carbide Precipitation Behavior in Fe–C–V–Cr–Mo Based High Speed Steels. steel research international.DOI
94. Hong Lei, Jimin Jiang, Bin Yang, Yan Zhao, Hongwei Zhang, Weixian Wang, Guiwen Dong (2018). Mathematical Model for Collision–Coalescence Among Inclusions in the Bloom Continuous Caster with M-EMS. Metallurgical and Materials Transactions B.DOI
95. 曹明，雷洪，李涛洪，郭东亮，梁坚坤，杜官本（2017）. 三乙酸甘油酯对酚醛树脂固化的影响. 《林业工程学报》.
96. 王璇，吴志刚，雷洪，董霁莹，赵成丽，杜官本（2017）. 大豆蛋白基胶黏剂主要性能与表征方法动态研究. 《西南林业大学学报(自然科学)》.
97. 吴志刚，席雪冬，雷洪，杜官本，张本刚，王璇，王洪艳（2017）. 单宁-大豆蛋白胶黏剂基胶合板等离子体改性研究. 《西南林业大学学报(自然科学)》.
98. 梁坚坤，李涛洪，曹明，雷洪，杜官本（2017）. 糠醇与甲醛在酸碱介质中的ESI-MS分析. 《西南林业大学学报(自然科学)》.
99. 吴志刚，席雪冬，曹明，雷洪，吴志敏，杜官本（2017）. 固化剂对高浓度甲醛制备的低摩尔UF树脂性能的影响. 《中南林业科技大学学报》.
100. 曹明，吴志刚，杜官本，雷洪，郭秀华，张本刚（2017）. 高浓度甲醛和大豆蛋白增强低摩尔脲醛树脂研究. 《中南林业科技大学学报》.
101. Dian‐Qiao Geng, Hong Lei, Jicheng He (2017). Decarburization and Inclusion Removal Process in Single Snorkel Vacuum Degasser. High Temperature Materials and Processes.DOI
102. Jianan Zhou, Jian‐bo Xie, Bao Wang, Hong Lei, Hua Zhang, Hongwei Ni (2017). Heat Transfer of Steel in a Slab Tundish with Vacuum Chamber. ISIJ International.DOI
103. 郝海霞，吴志刚，雷洪，席雪冬，杜官本（2016）. 3种处理方式对小桐子蛋白基胶黏剂的影响. 《西南林业大学学报(自然科学)》.
104. 吴志刚，雷洪，唐棣，席雪冬，曹明，沈高丽，杜官本（2016）. 小桐子蛋白基胶黏剂的改性研究. 《西南林业大学学报(自然科学)》.
105. 席雪冬，雷洪，杜官本，张倩玉，程志泳，林港，李斌（2016）. 单宁改性室温固化型MUF树脂性能研究. 《西南林业大学学报(自然科学)》.
106. 王璇，吴志刚，雷洪，席雪冬，曹明，熊文，杜官本（2016）. 大豆蛋白标签胶交联改性研究. 《西部林业科学》.
107. 吴志刚，杜官本，雷洪，王辉，席雪冬，曹明，廖晶晶（2016）. 新型酚醛树脂改性大豆蛋白基胶黏剂的研究. 《林产化学与工业》.
108. 雷洪（2016）. 集中式真空清扫技术在株冶集团直铅基夫赛特炉厂房的应用. 《湖南有色金属》.
109. 席雪冬，吴志刚，雷洪，杜官本，曹明，王洪艳（2016）. 冷固型三聚氰胺-尿素-甲醛树脂胶粘剂的研制. 《西部林业科学》.
110. 吴志刚，杜官本，雷洪，席雪冬，曹明，郭秀华（2016）. UFC和大豆蛋白制备环保脲醛树脂. 《林业工程学报》.
111. 廖晶晶，周晓剑，杜官本，王辉，雷洪，王洪艳（2016）. 聚酰胺-胺添加比例对超支化聚合物改性脲醛树脂的影响. 《林业工程学报》.
112. 陈洪民，雷洪，蒋计民，耿佃桥（2016）. 单管RH精炼过程钢液流场的水模型实验. 《钢铁研究学报》.
113. 王璇，吴志刚，王辉，雷洪，郭秀华，岳秀，杜官本（2016）. UFC制备MUF树脂胶接性能评价. 《福建林业科技》.
114. 吴志刚，梁坚坤，席雪冬，曹明，熊文，雷洪，杜官本（2016）. 交联剂-多羟甲基酚的制备. 《西部林业科学》.
115. Jianan Zhou, Jian‐bo Xie, Bao Wang, Hong Lei (2016). New insight into investigation of thermal transfer of molten steel inside a ladle with vacuum shell. Journal of Thermal Analysis and Calorimetry.DOI
116. Hongxia Li, Qiang Wang, Jiawei Jiang, Hong Lei, Zhancheng Guo, Jicheng He (2016). Analysis of Factors Affecting Free Surface Vortex Formation during Steel Teeming. ISIJ International.DOI
117. 刘达，雷洪，王天龙，张红伟（2015）. 关于1873K下铁液中铝脱氧平衡热力学的讨论. 《材料与冶金学报》.
118. 代传民，雷洪，毕乾，耿佃桥，陈洪民，赵岩（2015）. 通道式感应加热中间包的数值模拟. 《炼钢》.
119. 刘达，雷洪，王天龙，张红伟（2015）. 1873K下钢液中钛脱氧平衡的热力学分析. 《工业加热》.
120. 吕帅，耿佃桥，勾大钊，雷洪，赫冀成（2015）. 钢包底吹RH内气液流场的离散相模拟. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
121. Hong Lei (2015). New Insight into Combined Model and Revised Model for RTD Curves in a Multi-strand Tundish. Metallurgical and Materials Transactions B.DOI
122. Dian‐Qiao Geng, Jin-Xing Zheng, Kai Wang, Ping Wang, Ruquan Liang, Haitao Liu, Hong Lei, Jicheng He (2015). Simulation on Decarburization and Inclusion Removal Process in the Ruhrstahl–Heraeus (RH) Process with Ladle Bottom Blowing. Metallurgical and Materials Transactions B.DOI
123. Dian‐Qiao Geng, Xin Zhang, Xing‐An Liu, Ping Wang, Haitao Liu, Hong‐Min Chen, Chuan‐Min Dai, Hong Lei, Jicheng He (2014). Simulation on Flow Field and Mixing Phenomenon in Single Snorkel Vacuum Degasser. steel research international.DOI
124. Hongxia Li, Qiang Wang, Hong Lei, Jiawei Jiang, Zhancheng Guo, Jicheng He (2014). Mechanism Analysis of Free-Surface Vortex Formation during Steel Teeming. ISIJ International.DOI
125. Hong Lei, Yan Zhao, Dian‐Qiao Geng (2014). Mathematical Model for Cluster-Inclusion’s Collision-Growth in Inclusion Cloud at Continuous Casting Mold. ISIJ International.DOI
126. 代传民，刘敏，王天龙，陈洪民，耿佃桥，张红伟，雷洪（2013）. 三流梯形中间包控流装置优化的水模型研究. 《第十七届（2013年）全国炼钢学术会议论文集（A卷）》.
127. 杜官本，雷洪，PIZZI Antonio（2013）. PF和PUF树脂分子结构对比研究. 《林产化学与工业》.
128. 雷洪，杜官本，吴志刚，何瑞军（2013）. 甲醛和SDBS对碱降解改性大豆蛋白胶的影响. 《林业工程学报》.
129. 吴志刚，雷洪，杜官本（2012）. 大豆蛋白的碱处理研究. 《林业工程学报》.
130. 雷洪，杜官本（2012）. 生物质木材胶黏剂的研究进展. 《林业工程学报》.
131. 宋飞，雷洪，杜官本（2012）. 树脂型甲醛捕捉剂对脲醛树脂性能的影响. 《林业工程学报》.
132. 张俊，杜官本，雷洪，王洪艳（2012）. 空气介质阻挡放电等离子体对云南松单板表面的处理工艺. 《西南林业大学学报(自然科学)》.
133. 赵岩，雷洪，周骏，陈海耿，孙中强，邢国成（2012）. 侧孔长水口两流非对称中间包流场优化. 《钢铁》.
134. D-Q Geng, Hong Lei, J-C He (2012). Simulation on flow field and mixing phenomenon in RH degasser with ladle bottom blowing. Ironmaking & Steelmaking Processes Products and Applications.DOI
135. Dian‐Qiao Geng, Hong Lei, Jicheng He (2012). Effect of Traveling Magnetic Field on Flow, Mixing, Decarburization and Inclusion Removal during RH Refining Process. ISIJ International.DOI
136. Hong Lei (2012). Similarity of Mold Metallurgy. JOM.DOI
137. Hong Lei, Jicheng He (2012). Nucleation and Growth Kinetics of MgO in Molten Steel. Journal of Material Science and Technology.DOI
138. 雷洪，杜官本，Pizzi A，周晓剑（2011）. 乙二醛对蛋白基胶黏剂结构及性能的影响. 《西南林业大学学报(自然科学)》.
139. 王豫东，徐韬，狄明军，雷洪，徐栋，吴军，韩彤，于挥（2010）. 八钢板坯连铸中包浸入式水口结构的优化. 《新疆钢铁》.
140. 耿佃桥，雷洪，刘芳，赫冀成（2010）. VD真空精炼脱氢和脱氮过程的三维数值模拟. 《钢铁研究学报》.
141. 雷洪，赫冀成（2010）. 钢液中夹杂物动力学行为的数学模型. 《过程工程学报》.
142. 陈国军，雷洪，耿佃桥，韩代，陈健，赫冀成（2010）. 湍流控制器对异型中间包夹杂物去除的影响. 《炼钢》.
143. 雷洪，赵岩，鲍家琳，刘承军，陈海耿，赫冀成（2010）. 多流连铸中间包停留时间分布曲线总体分析方法. 《金属学报》.
144. 雷洪，张红伟，陈芝会，王恩刚，赫冀成（2010）. 连铸结晶器内钢液流动、凝固和夹杂物的分布. 《钢铁》.
145. 耿佃桥，雷洪，赫冀成，黄健，李秉强（2010）. 不同底吹位置对VD精炼脱碳过程的影响. 《钢铁》.
146. 杜官本，王思群，雷洪（2010）. 薄型中密度纤维板过压缩工艺研究. 《北京林业大学学报》.
147. Dian‐Qiao Geng, Hong Lei, Jicheng He (2010). Optimization of mixing time in a ladle with dual plugs. International Journal of Minerals Metallurgy and Materials.DOI
148. Hong Lei, Keiji Nakajima, Ji-Cheng He (2010). Mathematical Model for Nucleation, Ostwald Ripening and Growth of Inclusion in Molten Steel. ISIJ International.DOI
149. Dian‐Qiao Geng, Hong Lei, Jicheng He (2010). Numerical Simulation for Collision and Growth of Inclusions in Ladles Stirred with Different Porous Plug Configurations. ISIJ International.DOI
150. Hongwei Zhang, Keiji Nakajima, Hong Lei, Jicheng He (2010). Restrictions of Physical Properties on Solidification Microstructures of Al-based Binary Alloys by Cellular Automaton. ISIJ International.DOI
151. 耿佃桥，雷洪，赫冀成，黄健，李秉强（2009）. 浸渍管中心间距对RH精炼过程混合特性的影响. 《第七届(2009)中国钢铁年会论文集（上）》.
152. 耿佃桥，雷洪，赫冀成（2009）. 影响RH循环流量的行波磁场工艺参数分析. 《钢铁》.
153. 耿佃桥，雷洪，赫冀成（2009）. 不同工艺因素对RH精炼夹杂物去除过程的影响. 《钢铁》.
154. 雷洪，杜官本，PIZZI Antonio，李琴，赵伟刚，方群（2009）. 苯酚-尿素-甲醛共缩聚树脂结构形成比较. 《林产化学与工业》.
155. 雷洪，杜官本，PIZZI Antonio，赵伟刚，李琴，方群，赵超超（2009）. 碱性环境下苯酚-尿素-甲醛共缩聚树脂结构形成研究. 《林产化学与工业》.
156. 杜官本，雷洪，赵伟刚，方群，赵超超（2009）. 尿素用量对苯酚-尿素-甲醛共缩聚树脂的影响. 《北京林业大学学报》.
157. 杜官本，雷洪，A.Pizzi（2009）. 脲醛树脂固化过程的热机械性能分析. 《北京林业大学学报》.
158. 耿佃桥，雷洪，赫冀成（2009）. RH装置内夹杂物聚合与去除的三维数值模拟. 《钢铁研究学报》.
159. Dian‐Qiao Geng, Hong Lei, Jicheng He (2009). Numerical Simulation of the Multiphase Flow in the Rheinsahl–Heraeus (RH) System. Metallurgical and Materials Transactions B.DOI
160. Hong Lei, Hao Zhang, J-H He (2009). Flow, Solidification, and Solute Transport in a Continuous Casting Mold with Electromagnetic Brake. Chemical Engineering & Technology.DOI
161. Hong Lei, Dian‐Qiao Geng, Jicheng He (2009). A Continuum Model of Solidification and Inclusion Collision-growth in the Slab Continuous Casting Caster. ISIJ International.DOI
162. 雷洪，赫冀成（2008）. 连铸结晶器内簇状夹杂物分形生长的Monte-Carlo模拟. 《金属学报》.
163. 韩文锋，雷洪，张志仁（2008）. 八钢650机组轧制弹扁的生产组织优化. 《新疆钢铁》.
164. 耿佃桥，雷洪，赫冀成（2008）. 不同浸渍管参数下RH装置内钢液流动行为. 《钢铁》.
165. 陈芝会，王恩刚，雷洪，赫冀成（2008）. 电磁制动下结晶器内流体流动行为的数值研究. 《钢铁》.
166. 雷洪，赫冀成（2007）. 板坯连铸机内钢液流动和夹杂物碰撞长大行为. 《金属学报》.
167. Hong Lei, Guang Xu, J. He (2007). Magnetic Field, Flow Field and Inclusion Collision Growth in a Continuous Caster with EMBR. Chemical Engineering & Technology.DOI
168. Hong Lei, Jicheng He (2007). Numerical Simulation for Collision and Aggregation of Inclusions in a Slab Continuous Caster. steel research international.DOI
169. 杜官本，雷洪，方群（2006）. PMUF共缩聚树脂制备过程中分子结构变化特征的研究. 《北京林业大学学报》.
170. Hong Lei, Jicheng He (2006). A dynamic model of alumina inclusion collision growth in the continuous caster. Journal of Non-Crystalline Solids.DOI
171. 陈跃军，雷洪，王建英（2005）. 生产HRB335高速线材工艺优化. 《2005中国钢铁年会论文集（第3卷）》.
172. 陈跃军，雷洪，孙怀安（2005）. 八钢铌微合金化生产HRB400钢筋实践. 《新疆钢铁》.
173. 雷洪，李晶，傅杰（2004）. 小转炉+LF+CC生产弹簧钢的试验研究. 《炼钢》.
174. 刘青，查晓燕，贺东风，陈东奎，吴晓东，田乃媛，赵平，蒋立新，雷洪，柯善良（2003）. 炼钢厂的计算机辅助生产调度系统. 《中国金属学会2003中国钢铁年会论文集（3）》.
175. 雷洪，金永丽，朱苗勇，赫冀成（2002）. 连铸结晶器内电磁制动过程的数值模拟. 《钢铁研究学报》.
176. 雷洪，朱苗勇，赫冀成（2000）. 连铸结晶器内卷渣过程的数学模型. 《金属学报》.
177. 雷洪，朱苗勇，邱同榜，骆忠汉（2000）. 板坯连铸结晶器流场优化. 《炼钢》.
178. 雷洪，许海虹，朱苗勇，干勇，刘新，倪满森，刘家奇（1999）. 高速连铸结晶器内卷渣机理及其控制研究. 《钢铁》.
179. 樊俊飞，张清朗，朱苗勇，雷洪，王文忠（1998）. 六流T形连铸中间包内控流装置优化的水模研究. 《钢铁》.
180. 雷洪，朱苗勇，汪湿泉，许海虹，王文忠，樊俊飞，弁济宁（1998）. 水口吹氩对结晶器弯月面波动的影响. 《中国有色金属学报》.
181. 孙怀安，雷洪（1994）. H08A铝镇静焊条钢增硅原因初步分析. 《新疆钢铁》.