王鸿雨｜大连海事大学｜学者主页

期刊论文

2026

Review of the forming progress and challenges of carbon-resin composite bipolar plates and their flow field

Qianyuan Guo, Haoyang Sun, Jiayi Li, Hongyu Wang, Xiangkun Ma

Energy Materials

DOI

2025

Enhancement of mass and heat transfer performance in proton exchange membrane electrolysis cell through proportional distribution pattern of orthogonally sinusoidal structure optimization in serpentine flow fields

Dehui Yang, Hongyu Wang, Jinyan Han, Xinyu Wang, Peijian Lin, Naibao Huang

International Journal of Hydrogen Energy

DOI

2025

Effect of Nb doping on ICR and electrochemical corrosion behavior of Ti-Si-C bipolar composite coatings

Yu Wang, Deming Yang, Weiqiang Gao, Hongyu Wang, Ying Fu, Naibao Huang

Journal of Alloys and Compounds

DOI

2024

基于3种驱动方式的镁合金覆盖件柔性砂模拉深试验与仿真研究

韩昕宇，王鸿雨，吕关想，王欣雨

《模具工业》

2024

Preparation and Performance of Conductive Ti4O7 Coatings on SS316L Bipolar Plates

Zhongjie Zhao, Deming Yang, Weiqiang Gao, Hongyu Wang, Ying Fu, Naibao Huang

Journal of Thermal Spray Technology

DOI

2024

Research on AZ31 magnesium alloy tee joint tube with lateral hole by hot extrusion forming with sand mandrel limited by stainless steel gasket

Shi Shengnan, Hongyu Wang, Yuanyuan Li, Sun Jun-cai, Huang Naibao, Jie Sun, Zhang Shunhu

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2024

Effect of Ti3SiC2 concentration on corrosion resistance and ICR in bipolar plates composite ceramic coatings

Weiqiang Gao, Deming Yang, Zhongjie Zhao, Hongyu Wang, Ying Fu, Naibao Huang

Surface and Coatings Technology

DOI

2024

Numerical and experimental study on designs and performances of multi-serpentine flow field with bend-area block for proton exchange membrane fuel cell

Peijian Lin, Guoling Zhang, Dehui Yang, Yang Katie Zhao, Hongyu Wang, Guogang Yang, Shian Li, Juncai Sun

Fuel

DOI

2024

Simulation Research on the Performance of PEMEC with Single Channel Flow Field Established by Orthogonally Sinusoidal Function with Different Amplitudes and Angular Frequencies

Dehui Yang, Hongyu Wang, Yuanyuan Li, Liu Menghan, Jinyan Han, Naibao Huang

International Journal of Energy Research

DOI

2023

Design of a Novel Multidimensional Forced-Convections Flow Channel with Both Blockages and Under-Rib Channels for PEMFC

Peijian Lin, Hongyu Wang, Guodong Wang, Jirui Li, Guogang Yang, Shian Li, Juncai Sun

Journal of Energy Engineering

DOI

2023

Research on Different Design of Plane Flow Fields about Intersection Node in PEMFC

Jirui Li, Hongyu Wang, Juncai Sun, Peijian Lin, Guodong Wang, Hao Lv, Deming Yang

Journal of Energy Engineering

DOI

2022

基于有限元仿真的航空发动机叶片辊轧成形过程参数优化

王国栋，王鸿雨，蒋磊，腾飞，孙俊才，孔祥伟

《锻压技术》

DOI

2022

Research about two‐step channel with lateral narrowing structures in the flow mass transfer of proton exchange membrane fuel cell

J.R. Li, Hongyu Wang, Peijian Lin, G.D. Wang, Juncai Sun, Dehui Yang

Fuel Cells

DOI

2020

Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC

Jiefu Shi, Pengchao Zhang, Yuetong Han, Hongyu Wang, Xinyu Wang, Yingshui Yu, Juncai Sun

International Journal of Hydrogen Energy

DOI

2020

Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell

Pengchao Zhang, Chunmiao Hao, Yuetong Han, Fengming Du, Hongyu Wang, Xinyu Wang, Juncai Sun

Surface and Coatings Technology

DOI

2019

Investigation of diffusion alloying time on electrochemical behavior and conductivity of Nb-modified AISI 430 SS as PEMFC bipolar plate

Fupeng Cheng, Jinglong Cui, Shuai Xu, Hongyu Wang, Pengchao Zhang, Juncai Sun

Anti-Corrosion Methods and Materials

DOI

2018

对称及非对称材料加工变形解析方法研究

王鸿雨

《东北大学》

2017

Dynamic matrix predictive control for a hydraulic looper system in hot strip mills

尹方辰，孙杰，彭文，王鸿雨，杨晶，张殿华

Journal of Central South University

2015

基于铅轧实验宽展公式中的名义摩擦因数（英文）

王鸿雨，胡玉昆，高锋，赵德文，张殿华

Transactions of Nonferrous Metals Society of China

2015

Analysis and prediction of fishtail during V-H hot rolling process

李旭，王鸿雨，丁敬国，徐久晶，张殿华

Journal of Central South University

2014

粗轧过程立轧余弦狗骨函数模型轧制力及形状的解析与验证

王鸿雨

《东北大学》

预印本

2020

Shape and Position Design of Two-Step Micro-Channel on Plate During Rubber Pad Forming Process Based on Simulation

Fei Teng, Hongyu Wang, Guodong Wang, Lei Jiang, Jirui Li, Shengnan Shi, Juncai Sun, Jie Sun

DOI

王鸿雨

精选作品

期刊论文

Review of the forming progress and challenges of carbon-resin composite bipolar plates and their flow field

Enhancement of mass and heat transfer performance in proton exchange membrane electrolysis cell through proportional distribution pattern of orthogonally sinusoidal structure optimization in serpentine flow fields

Effect of Nb doping on ICR and electrochemical corrosion behavior of Ti-Si-C bipolar composite coatings

基于3种驱动方式的镁合金覆盖件柔性砂模拉深试验与仿真研究

Preparation and Performance of Conductive Ti4O7 Coatings on SS316L Bipolar Plates

Research on AZ31 magnesium alloy tee joint tube with lateral hole by hot extrusion forming with sand mandrel limited by stainless steel gasket

Effect of Ti3SiC2 concentration on corrosion resistance and ICR in bipolar plates composite ceramic coatings

Numerical and experimental study on designs and performances of multi-serpentine flow field with bend-area block for proton exchange membrane fuel cell

Simulation Research on the Performance of PEMEC with Single Channel Flow Field Established by Orthogonally Sinusoidal Function with Different Amplitudes and Angular Frequencies

Design of a Novel Multidimensional Forced-Convections Flow Channel with Both Blockages and Under-Rib Channels for PEMFC

Research on Different Design of Plane Flow Fields about Intersection Node in PEMFC

基于有限元仿真的航空发动机叶片辊轧成形过程参数优化

Research about two‐step channel with lateral narrowing structures in the flow mass transfer of proton exchange membrane fuel cell

Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC

Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell

Investigation of diffusion alloying time on electrochemical behavior and conductivity of Nb-modified AISI 430 SS as PEMFC bipolar plate

对称及非对称材料加工变形解析方法研究

Dynamic matrix predictive control for a hydraulic looper system in hot strip mills

基于铅轧实验宽展公式中的名义摩擦因数（英文）

Analysis and prediction of fishtail during V-H hot rolling process

粗轧过程立轧余弦狗骨函数模型轧制力及形状的解析与验证

预印本

Shape and Position Design of Two-Step Micro-Channel on Plate During Rubber Pad Forming Process Based on Simulation

研究方向