百晓学者学者目录

王富耻

北京理工大学材料学院

个人简介

王富耻,北京理工大学材料学院教授,长期从事金属学及金属工艺、材料科学、武器工业与军事技术研究,代表性工作包括静液挤压钨合金的显微组织与力学性能、装甲用镁合金抗弹性能表征体系探讨、等离子喷涂ZrC涂层耐烧蚀性能与机理研究、弹靶作用过程中陶瓷基复合材料的表面驻留行为等。

精选作品

期刊论文

  1. Rui An, Yang-Wei Wang, Jia-Wei Bao, B. Jiang, Huan-Wu Cheng, Xing-Wang Cheng, Fuchi Wang (2024). Predicting ballistic resistance based on the mechanical properties of armored ceramics. Journal of Materials Research and Technology.DOI
  2. Jia-Wei Bao, Yang-Wei Wang, Xing-Wang Cheng, Fuchi Wang, Huan-Wu Cheng (2023). Ballistic properties of silicon carbide ceramic under weak support conditions. Journal of Materials Research and Technology.DOI
  3. Rui An, Yangwei Wang, Qiang Fu, Yan Tan, Huanwu Cheng, Xingwang Cheng, Fuchi Wang (2022). Study on parameter acquisition and optimization methods of JH-2 constitutive model for ceramic. International Journal of Impact Engineering.DOI
  4. Zhichao Liu, Zhihua Nie, Xianjin Ning, Xiuchen Zhao, Xiaodong Yu, Fuchi Wang, Chengwen Tan (2021). Mechanical response and microstructural evolution of Ni-27 W alloys during uniaxial tension. Journal of Alloys and Compounds.DOI
  5. Jiawei Bao, Yangwei Wang, Rui An, Huanwu Cheng, Fuchi Wang (2021). Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates. Defence Technology.DOI
  6. Yonghua Shen, Yangwei Wang, Zhaopu Yan, Xingwang Cheng, Qunbo Fan, Fuchi Wang, Cheng Miao (2021). Experimental and Numerical Investigation of the Effect of Projectile Nose Shape on the Deformation and Energy Dissipation Mechanisms of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Composite. Materials.DOI
  7. Nan Jin, Fuchi Wang, Yangwei Wang, Bowen Zhang, Huanwu Cheng, Hongmei Zhang (2021). Corrigendum to “Failure and energy absorption characteristics of four lattice structures under dynamic loading” [Mater. Design 169 (2019) 107655]. Materials & Design.DOI
  8. Yonghua Shen, Yangwei Wang, Shaofeng Du, Zhikun Yang, Huanwu Cheng, Fuchi Wang (2021). Effects of the adhesive layer on the multi-hit ballistic performance of ceramic/metal composite armors. Journal of Materials Research and Technology.DOI
  9. Dujun Luo, Yangwei Wang, Fuchi Wang, Huanwu Cheng, Bowen Zhang, Zongjia Li (2021). Influence of cover thickness on the ballistic performance of silicon carbide subjected to large-scale tungsten projectiles. Ceramics International.DOI
  10. 文康,李和章,马壮,高丽红,王富耻,李文智(2020). 光斑尺寸对连续激光辐照铝合金温度响应影响研究. 《中国光学(中英文)》.
  11. Faisal Nazeer, Zhuang Ma, Lihong Gao, Abdul Malik, Sehreish Abrar, Fuchi Wang, Hezhang Li (2020). Effect of graphite mesh sizes on thermo-mechanical properties of Cu-GF composites. Vacuum.DOI
  12. Chen Ma, Zhuang Ma, Lihong Gao, Taotao Wu, Fuchi Wang, Hatsuo Ishida (2020). Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation. Journal of Materials Science.DOI
  13. Liang Wang, Tangqing Cao, Xudong Liu, Benpeng Wang, Ke Jin, Yao-Jian Liang, Lu Wang, Fuchi Wang, Yang Ren, Jun Liang, Yunfei Xue (2020). A novel stress-induced martensitic transformation in a single-phase refractory high-entropy alloy. Scripta Materialia.DOI
  14. Jiawei Bao, Yangwei Wang, Rui An, Bowen Zhang, Huanwu Cheng, Fuchi Wang (2020). The Effect of Interlayer Materials on Ceramic Damage in SiC/Al Composite Structure. Materials.DOI
  15. Faisal Nazeer, Zhuang Ma, Lihong Gao, Sehreish Abrar, Abdul Malik, Muhammad Abubaker Khan, Fuchi Wang, Hezhang Li (2020). Higher mechanical and thermal properties of Cu-rGO composites. Vacuum.DOI
  16. Weiye Xu, Lihong Gao, Chen Ma, Zhuang Ma, Taotao Wu, Alexandr Alexandrovich Rogachev, Fuchi Wang (2020). Design and preparation of composite coatings with increased reflectivity under high-energy continuous wave laser ablation. Ceramics International.DOI
  17. Qian Xiao, Yao-Jian Liang, Qi Chen, Gang Sha, Wenjun Lu, Wenqi Guo, Lu Wang, Fuchi Wang, Hongnian Cai, Yunfei Xue (2020). Towards stronger high-entropy alloy by nanoprecipitation-hardened ultrafine-/nano-grains. Materials Science and Engineering A.DOI
  18. Shijie Sun, Yanbo Liu, Zhuang Ma, Fuchi Wang, Shizhen Zhu, Jiayi Guo, Changqing Hong (2020). Effect of powder pre-oxidation on the microstructure and ablation resistance of ZrB2–SiC coating. Journal of Alloys and Compounds.DOI
  19. Zhiyu Hu, Zhaohui Zhang, Xingwang Cheng, Fuchi Wang, Yifan Zhang, Shenglin Li (2020). A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications. Materials & Design.DOI
  20. Dujun Luo, Yangwei Wang, Fuchi Wang, Huanwu Cheng, Bowen Zhang, Yuman Zhu (2020). The influence of metal cover plates on ballistic performance of silicon carbide subjected to large-scale tungsten projectile. Materials & Design.DOI
  21. Wenzhi Li, Lihong Gao, Zhuang Ma, Yanbo Liu, Fuchi Wang, Jiawei Wang, Lijun Wang, Hezhang Li (2020). Effect of Ni content on high power laser ablation behavior of coatings sprayed by Ni covering graphite/SiO2 powders. Journal of Material Science and Technology.DOI
  22. Shangcheng Zhou, Lu Wang, Yao-Jian Liang, Yichao Zhu, Ruizhi Jian, Benpeng Wang, Liang Wang, Yunfei Xue, Fuchi Wang, Hongnian Cai, Yang Ren (2020). A strategy to achieve high-strength WNiFe composite-like alloys with low W content by laser melting deposition. Materials & Design.DOI
  23. 郑超,朱秀荣,辛海鹰,邵志文,王欢,彭华新,程兴旺,王富耻(2019). 厚度和层间界面对Ti6Al4V钛合金抗弹性能的影响. 《稀有金属材料与工程》.
  24. 司先锋,马壮,高丽红,王富耻,朱时珍,刘玲,柳彦博(2019). 等离子喷涂沉积Al2O3-SiO2涂层的光学性能. 《硅酸盐学报》.DOI
  25. Yuman Zhu, Dujun Luo, Zongjia Li, Yangwei Wang, Huanwu Cheng, Fuchi Wang, Tao Chen (2019). Effect of sintering temperature on the mechanical properties and microstructures of pressureless-sintered B4C/SiC ceramic composite with carbon additive. Journal of Alloys and Compounds.DOI
  26. Faisal Nazeer, Zhuang Ma, Lihong Gao, Abdul Malik, Muhammad Abubaker Khan, Sehrish Abrar, Bilal Ahmed, Fuchi Wang, Hezhang Li (2019). Effect of graphene on thermal and mechanical properties of copper-titanium carbide composites. Vacuum.DOI
  27. Shijie Sun, Zhuang Ma, Yanbo Liu, Ling Liu, Fuchi Wang, Xingtao Luan (2019). Ablation mechanism and properties of SiO2 modified ZrB2-SiC coatings fabricated on C/C composites via plasma spraying technology. Surface and Coatings Technology.DOI
  28. Wenzhi Li, Yinjun Gao, Zhuang Ma, Lihong Gao, Chenghua Wei, Fuchi Wang, Taotao Wu, Lijun Wang, Hezhang Li (2019). Comparison thermochemical and thermophysical performances analysis in laser processing by dynamic heat-matter diffusion coupling simulation and corresponding experiment validation. Ceramics International.DOI
  29. Zhiming Yang, Jinxu Liu, Fuchi Wang, Shukui Li, Xinya Feng (2019). Effect of fiber hybridization on mechanical performances and impact behaviors of basalt fiber/UHMWPE fiber reinforced epoxy composites. Composite Structures.DOI
  30. Dujun Luo, Yangwei Wang, Fuchi Wang, Huanwu Cheng, Yu Zhu (2019). Ballistic Behavior of Oblique Ceramic Composite Structure against Long-Rod Tungsten Projectiles. Materials.DOI
  31. Xuan Liu, Gang Sha, Qinli Wu, Yao-Jian Liang, Jiating Huang, Ke Jin, Yunfei Xue, Benpeng Wang, Linjing Wang, Lu Wang, Fuchi Wang, Qunbo Fan, Zhenhai Xia (2019). Phase stability of an high-entropy Al-Cr-Fe-Ni-V alloy with exceptional mechanical properties: First-principles and APT investigations. Computational Materials Science.DOI
  32. Zhiyu Hu, Zhaohui Zhang, Xingwang Cheng, Fuchi Wang, Yifan Zhang, Qi Song, Shi-Pan Yin, Hao Wang, Xianyu Li (2019). Strain induced additional growth and high integrity of TiB-whiskers in titanium matrix composite: intrinsic mechanisms and superior strengthening effects. Materials Research Express.DOI
  33. Faisal Nazeer, Zhuang Ma, Lihong Gao, Abdul Malik, Muhammad Abubaker Khan, Fuchi Wang, Hezhang Li (2019). Excellent mechanical properties of copper-graphite composites with the addition of tantalum alloying element. Vacuum.DOI
  34. Faisal Nazeer, Zhuang Ma, Lihong Gao, Abdul Malik, Muhammad Abubaker Khan, Fuchi Wang, Hezhang Li (2019). Effect of processing routes on mechanical and thermal properties of copper–graphene composites. Materials Science and Technology.DOI
  35. Chen Ma, Zhuang Ma, Lihong Gao, Yanbo Liu, Taotao Wu, Fuchi Wang, Hatsuo Ishida (2019). Ablation behavior of boron-modified phenolic resin irradiated by high-energy continuous-wave laser and its evolution of carbon structure. Materials & Design.DOI
  36. Faisal Nazeer, Zhuang Ma, Lihong Gao, Muhammad Abubaker Khan, Abdul Malik, Fuchi Wang, Hezhang Li (2019). Effect of particle size on mechanical and anisotropic thermal conductivity of copper-reduced graphene oxide composites. Results in Physics.DOI
  37. Nan Jin, Fuchi Wang, Yangwei Wang, Bowen Zhang, Huanwu Cheng, Hongmei Zhang (2019). Effect of structural parameters on mechanical properties of Pyramidal Kagome lattice material under impact loading. International Journal of Impact Engineering.DOI
  38. Chen Ma, Zhuang Ma, Lihong Gao, Taotao Wu, Fuchi Wang, Hatsuo Ishida (2019). Zirconium carbide-modified polymer-matrix composites with improved reflectivity under high-energy laser ablation. Ceramics International.DOI
  39. Wenzhi Li, Lihong Gao, Zhuang Ma, Fuchi Wang, Taotao Wu, Lijun Wang, Hezhang Li (2019). Multi-synergy ablative effects of laminated SiO2–graphite/SiO2/Cu composite irradiated by high power laser. Ceramics International.DOI
  40. Chen Ma, Zhuang Ma, Lihong Gao, Yanbo Liu, Hezhang Li, Yuwei Lv, Fuchi Wang (2019). Ablation behavior of glass fiber reinforced polybenzoxazine composites irradiated by high energy continuous-wave laser. Materials Research Express.DOI
  41. Yuman Zhu, Fuchi Wang, Yangwei Wang, Huanwu Cheng, Dujun Luo, Yanzhe Zhao (2019). Mechanical properties and microstructure evolution of pressureless-sintered B4C–SiC ceramic composite with CeO2 additive. Ceramics International.DOI
  42. Feng Xu, Shizhen Zhu, Zhuang Ma, Hezhang Li, Jiawei Wang, Taotao Wu, Fuchi Wang (2019). Ablation behavior of inorganic particle-filled polybenzoxazine composite coating irradiated by high-intensity continuous laser. Ceramics International.DOI
  43. Ying Li, Chengwen Tan, Xiaodong Yu, Zhihua Nie, Xiuchen Zhao, Jianmin Han, Shenpo Yuan, Mingyu Zhao, Chuanbin Guo, Fuchi Wang (2019). Evolution of β Mg17Al12 in Mg Al Zn Ag alloy over time. Materials Science and Engineering A.DOI
  44. Huilin Zhao, Xianjin Ning, Chengwen Tan, Xiaodong Yu, Zhihua Nie, Xinjun Sun, Yan Cui, Zenglin Yang, Fuchi Wang, Hongnian Cai (2019). Influence of Al12Mg17 Additive on Performance of Cold-Sprayed Ni-Al Reactive Material. Journal of Thermal Spray Technology.DOI
  45. Nan Jin, Fuchi Wang, Yangwei Wang, Bowen Zhang, Huanwu Cheng, Hongmei Zhang (2019). Failure and energy absorption characteristics of four lattice structures under dynamic loading. Materials & Design.DOI
  46. Faisal Nazeer, Zhuang Ma, Yitong Xie, Lihong Gao, Abdul Malik, Muhammad Abubaker Khan, Fuchi Wang, Hezhang Li (2019). A novel fabrication method of copper–reduced graphene oxide composites with highly aligned reduced graphene oxide and highly anisotropic thermal conductivity. RSC Advances.DOI
  47. 朱静波,王扬卫,王富耻,罗度均(2018). 界面改性对SiC/Al双连通复合材料力学性能的影响. 《稀有金属材料与工程》.
  48. 周上程,张鹏,薛云飞,王富耻,王鲁,曹堂清,谈震,程宝元,王本鹏(2018). 气雾化制备Al0.6CoCrFeNi高熵合金粉体的显微组织演变(英文). Transactions of Nonferrous Metals Society of China.
  49. 孔静,马壮,高丽红,柳彦博,韦成华,王立君,王富耻(2018). La1-xSrxTiO3+δ陶瓷涂层抗激光烧蚀性能研究. 《现代技术陶瓷》.
  50. Shangcheng Zhou, Yao-Jian Liang, Yichao Zhu, Ruizhi Jian, Benpeng Wang, Yunfei Xue, Lu Wang, Fuchi Wang (2018). High entropy alloy: A promising matrix for high-performance tungsten heavy alloys. Journal of Alloys and Compounds.DOI
  51. Faisal Nazeer, Zhuang Ma, Lihong Gao, Fuchi Wang, Muhammad Abubaker Khan, Abdul Malik (2018). Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites. Composites Part B Engineering.DOI
  52. Chen Ma, Zhuang Ma, Lihong Gao, Yanbo Liu, Taotao Wu, Lijun Wang, Chenghua Wei, Fuchi Wang (2018). Preparation and characterization of coatings with anisotropic thermal conductivity. Materials & Design.DOI
  53. Wenzhi Li, Lihong Gao, Yanbo Liu, Zhuang Ma, Fuchi Wang, Hezhang Li (2018). Preparation, modification and characterization of plasma sprayed graphite/SiO2 powder and related coating. Ceramics International.DOI
  54. Yao-Jian Liang, Linjing Wang, Yuren Wen, Bao-yuan CHENG, Qinli Wu, Tangqing Cao, Qian Xiao, Yunfei Xue, Gang Sha, Yandong Wang, Yang Ren, Xiaoyan Li, Lu Wang, Fuchi Wang, Hongnian Cai (2018). High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys. Nature Communications.DOI
  55. Zhiyu Hu, Zhao-Hui Zhang, Xingwang Cheng, Qi Song, Shi-Pan Yin, Hao Wang, Fuchi Wang (2018). Microstructure evolution and tensile properties of Ti-(AlxTiy) core-shell structured particles reinforced aluminum matrix composites after hot-rolling/heat-treatment. Materials Science and Engineering A.DOI
  56. Chen Ma, Zhuang Ma, Lihong Gao, Yanbo Liu, Taotao Wu, Yongxiang Zhu, Fuchi Wang (2018). Laser ablation behavior of flake graphite and SiO2 particle-filled hyperbranched polycarbosilane matrix composite coatings. Ceramics International.DOI
  57. Chen Ma, Zhuang Ma, Lihong Gao, Yanbo Liu, Jiawei Wang, Mingying Song, Fuchi Wang, Hatsuo Ishida (2018). Laser ablation behavior of nano-copper particle-filled phenolic matrix nanocomposite coatings. Composites Part B Engineering.DOI
  58. Shangcheng Zhou, Peng ZHANG, Yunfei Xue, Fuchi Wang, Lu Wang, Tangqing Cao, Zhen Tan, Bao-yuan CHENG, Ben-peng WANG (2018). Microstructure evolution of Al0.6CoCrFeNi high entropy alloy powder prepared by high pressure gas atomization. Transactions of Nonferrous Metals Society of China.DOI
  59. Wenzhi Li, Fuchi Wang, Zhuang Ma, Dong An, Yanbo Liu, Lihong Gao (2018). Laser Damage Resistant Properties of Plasma Sprayed Ni-Coated Coatings Irradiated by High-Power Continuous Laser. Science of Advanced Materials.DOI
  60. Jiayi Zheng, Song Wang, Lihong Gao, Zhuang Ma, Fuchi Wang (2018). First-principles calculations of crystal structure, electronic structure and optical properties of Ba2RETaO6 (RE = Y, La, Pr, Sm, Gd). Journal of Materials Science.DOI
  61. Wenzhi Li, Jing Kong, Taotao Wu, Lihong Gao, Zhuang Ma, Yanbo Liu, Fuchi Wang, Chenghua Wei, Lijun Wang (2018). Characterization, optical properties and laser ablation behavior of epoxy resin coatings reinforced with high reflectivity ceramic particles. Materials Research Express.DOI
  62. Huicong Zhang, Xiaodong Yu, Zhihua Nie, Chengwen Tan, Fuchi Wang, Huaijian Cai, Ying Li, Fang Wang, Hongnian Cai (2018). Microstructure and growth mechanism of tungsten carbide coatings by atmospheric CVD. Surface and Coatings Technology.DOI
  63. Ying Li, Jianmin Han, Chengwen Tan, Chuanbin Guo, Junyi Yue, Fuchi Wang, Mingyu Zhao, Xifan Mei, Chunmei Dai (2018). Tantalum coating prepared by APCVD and in-vivo biological evaluation. Surface Engineering.DOI
  64. Huilin Zhao, Chengwen Tan, Xiaodong Yu, Xianjin Ning, Zhihua Nie, Hongnian Cai, Fuchi Wang, Yan Cui (2018). Enhanced reactivity of Ni-Al reactive material formed by cold spraying combined with cold-pack rolling. Journal of Alloys and Compounds.DOI
  65. Shijie Sun, Zhuang Ma, Yanbo Liu, Ling Liu, Fuchi Wang, Jiayi Guo (2018). Induction plasma spheroidization of ZrB2-SiC powders for plasma-spray coating. Journal of the European Ceramic Society.DOI
  66. Chao Zheng, Xiurong Zhu, Haiying Xin, Zhiwen Shao, Huan Wang, Hua-Xin Peng, Xingwang Cheng, Fuchi Wang (2018). Failure Mode of Ductile Hole Formation in Thick Ti–6Al–4V Targets Having Equiaxed and Lamellar Microstructures. Springer eBooks.DOI
  67. 刘玲,王富耻,马壮,孙英超(2017). NiCrCoAlY粘结层表面等离子喷涂(La0.4Sm0.5Yb0.1)2-Zr2O7涂层的热性能研究(英文). 《稀有金属材料与工程》.
  68. 余东辉,范群波,王富耻,夏雨萌,穆啸楠(2017). 铸造态钛合金力学性能及抗弹性能研究. 《稀有金属材料与工程》.
  69. 高举斌,王扬卫,王富耻,孙见卓(2017). 弹靶作用过程中陶瓷基复合材料的表面驻留行为. 《航空制造技术》.
  70. 马琛,马壮,高丽红,王富耻(2017). 激光对鳞片石墨改性酚醛树脂涂层的损伤机理. 《中国光学(中英文)》.
  71. 李文智,马壮,高丽红,王富耻,王立君,韦成华(2017). CaCO3涂层激光烧蚀性能初步探究. 《中国材料进展》.
  72. 朱锦鹏,马壮,高丽红,柳彦博,王富耻,刘玲,朱时珍(2017). 基于等离子喷涂的反射型激光防护涂层研究. 《中国光学(中英文)》.
  73. Hao Wang, Yan-Bo Liu, Xianjin Ning, Quansheng Wang, Fuchi Wang, Dong Chen (2017). The influence of milling parameters on the characteristics of milled and spray-dried NiCoCrAlY–Al2O3 composite powders.DOI
  74. Ling Liu, Wang Fu-chi, Zhuang Ma, Yingchao Sun (2017). Thermal Properties of Plasma-Sprayed (La 0.4 Sm 0.5 Yb 0.1 ) 2 -Zr 2 O 7 Coatings on NiCrCoAlY Bond Coats. 《稀有金属材料与工程》.DOI
  75. Ran Shi, Zhihua Nie, Qunbo Fan, Fuchi Wang, Yu Wei Zhou, Xin Liu (2017). Correlation between dislocation-density-based strain hardening and microstructural evolution in dual phase TC6 titanium alloy. Materials Science and Engineering A.DOI
  76. Jiayi Zheng, Song Wang, Lihong Gao, Zhuang Ma, Fuchi Wang, Junsheng Wang (2017). Theoretical and experimental studies of Ba 2 SmTaO 6 on crystal structure, electronic structure and optical properties. Journal of Materials Chemistry C.DOI
  77. Jinpeng Zhu, Zhuang Ma, Yinjun Gao, Lihong Gao, Vladimir Pervak, Lijun Wang, Chenghua Wei, Fuchi Wang (2017). Ablation Behavior of Plasma-Sprayed La1–xSrxTiO3+δ Coating Irradiated by High-Intensity Continuous Laser. ACS Applied Materials & Interfaces.DOI
  78. Yu Ren, Zhiyong Xue, Xiaodong Yu, Chengwen Tan, Fuchi Wang, Hongnian Cai (2017). Spall strength and fracture behavior of Ti–10V–2Fe–3Al alloy during one-dimensional shock loading. International Journal of Impact Engineering.DOI
  79. Zhiyu Hu, Xingwang Cheng, Shenglin Li, Hongmei Zhang, Hu Wang, Zhaohui Zhang, Fuchi Wang (2017). Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites. Journal of Alloys and Compounds.DOI
  80. Feng Xu, Zhuang Ma, Hezhang Li, Lihong Gao, Fuchi Wang (2017). Ablation properties of inorganic filler modified benzoxazine composite coating irradiated by high-intensity continuous laser. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  81. Yu Ren, Xiaodong Yu, Chengwen Tan, Fuchi Wang, Hongnian Cai (2017). Shock-induced phase transitions and its effect on the spall fracture behavior of a metastable β titanium alloy. Materials Science and Engineering A.DOI
  82. Jingbo Zhu, Fuchi Wang, Yangwei Wang, Bowen Zhang, Lu Wang (2017). Interfacial structure and stability of a co-continuous SiC/Al composite prepared by vacuum-pressure infiltration. Ceramics International.DOI
  83. Ran Shi, Guoju Li, Yumeng Xia, Qunbo Fan, Fuchi Wang, Hongmei Zhang, Xingwang Cheng (2017). Microstructural characterization of an α+β type Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy during recrystallization annealing. Journal of Alloys and Compounds.DOI
  84. Lili Ma, Lu Wang, Zhihua Nie, Fuchi Wang, Yunfei Xue, Jinlian Zhou, Tangqing Cao, Yandong Wang, Yang Ren (2017). Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron-based high-energy X-ray diffraction. Acta Materialia.DOI
  85. Hao Wang, Yanbo Liu, Xianjin Ning, Quansheng Wang, Fuchi Wang, Dong Chen (2017). Oxidation of Ni-based single crystal after grit-blasting during exposure at high temperature. Materials at High Temperatures.DOI
  86. Ying Li, Xiaodong Yu, Chengwen Tan, Fuchi Wang, Honglei Ma, Jintao Yue (2017). Porous tungsten prepared by atmospheric-pressure chemical vapor deposition with WF6 and its characterization. AIP conference proceedings.DOI
  87. 徐一博,王扬卫,王富耻,张博文,罗度均(2016). 陶瓷骨架特征对SiC3D/Al复合材料性能的影响. 《第十九届全国高技术陶瓷学术年会摘要集》.
  88. 孔静,高丽红,马壮,王富耻,岳礼坳(2016). 陶瓷涂层的抗激光烧蚀性能研究. 《第十九届全国高技术陶瓷学术年会》.
  89. 李文智,韦成华,高丽红,马壮,王富耻,吴涛涛(2016). 散射光信号与石墨-二氧化硅激光辐照烧蚀阈值的关系. 《中国光学(中英文)》.
  90. Zhiyu Hu, Xingwang Cheng, Zhao-Hui Zhang, Hu Wang, Shenglin Li, Г. Ф. Корзникова, Д. В. Гундеров, Fuchi Wang (2016). The influence of defect structures on the mechanical properties of Ti-6Al-4V alloys deformed by high-pressure torsion at ambient temperature. Materials Science and Engineering A.DOI
  91. Wenzhi Li, Lihong Gao, Zhuang Ma, Fuchi Wang (2016). Ablation behavior of graphite/SiO2 composite irradiated by high-intensity continuous laser. Journal of the European Ceramic Society.DOI
  92. Lili Ma, Cheng Li, Yiling Jiang, Jinlian Zhou, Lu Wang, Fuchi Wang, Tangqing Cao, Yunfei Xue (2016). Cooling rate-dependent microstructure and mechanical properties of Al Si0.2CrFeCoNiCu1− high entropy alloys. Journal of Alloys and Compounds.DOI
  93. Jinpeng Zhu, Zhuang Ma, Lihong Gao, Yanbo Liu, Fuchi Wang (2016). Influence of microstructure on the optical property of plasma-sprayed Al, Cu, and Ag coatings. Materials & Design.DOI
  94. Zhipeng Huang, Lihong Gao, Yangwei Wang, Fuchi Wang (2016). Erratum to: Determination of the Johnson-Cook Constitutive Model Parameters of Materials by Cluster Global Optimization Algorithm. Journal of Materials Engineering and Performance.DOI
  95. Jingbo Zhu, Yangwei Wang, Fuchi Wang, Qunbo Fan (2016). Effect of Ductile Agents on the Dynamic Behavior of SiC3D Network Composites. Applied Composite Materials.DOI
  96. Zhipeng Huang, Lihong Gao, Yangwei Wang, Fuchi Wang (2016). Determination of the Johnson-Cook Constitutive Model Parameters of Materials by Cluster Global Optimization Algorithm. Journal of Materials Engineering and Performance.DOI
  97. Wang Hu, Zhao-Hui Zhang, Zhiyu Hu, Fuchi Wang, Shenglin Li, Elena Korznikov, Xiuchen Zhao, Ying Liu, Zhenfeng Liu, Zhe Kang (2016). Synergistic strengthening effect of nanocrystalline copper reinforced with carbon nanotubes. Scientific Reports.DOI
  98. Qi Wang, Fuchi Wang, Xingwang Cheng (2016). Electrochemical performance of aluminum niobium oxide as anode for lithium‐ion batteries. Rare Metals.DOI
  99. Chao Zheng, Fuchi Wang, Xingwang Cheng, Jinxu Liu, Tengteng Liu, Zhengxin Zhu, Kaiwen Yang, Meiqi Peng, Dan Jin (2016). Capturing of the propagating processes of adiabatic shear band in Ti–6Al–4V alloys under dynamic compression. Materials Science and Engineering A.DOI
  100. Song Wang, Miao Jiang, Lihong Gao, Zhuang Ma, Fuchi Wang (2016). Theoretical and Experimental Studies on the Crystal Structure, Electronic Structure and Optical Properties of SmTaO4. Materials.DOI
  101. 潘媚娟,王富耻,马壮,王扬卫(2015). 界面改性对新型SiC3D/环氧树脂复合材料力学性能的影响. 《稀有金属材料与工程》.
  102. 李荣婷,范群波,王富耻,高瑞华(2015). 一种新型近β钛合金Ti684动态力学性能与抗弹性能的研究. 《稀有金属材料与工程》.
  103. 文波,马壮,柳彦博,王富耻,才鸿年(2015). 等离子喷涂ZrC涂层耐烧蚀性能与机理研究. 《稀有金属材料与工程》.
  104. 高瑞华,范群波,王富耻,张毅鹏,霍利瑞,裴传虎(2015). 钛合金装甲材料动态压缩力学性能及其抗弹能力关系. 《稀有金属材料与工程》.
  105. 范金娟,常振东,陶春虎,王富耻(2015). Si/莫来石/Er2SiO5环境障涂层的高温氧化行为. 《中国有色金属学报》.
  106. 沈艳波,于晓东,谭成文,王富耻,马红磊,才鸿年(2015). 化学气相沉积钨显微组织缺陷的形成与控制. 《中国有色金属学报》.
  107. Jinpeng Zhu, Lihong Gao, Zhuang Ma, Yanbo Liu, Fuchi Wang (2015). Optical property of La1−Sr TiO3+ coatings deposited by plasma spraying technique. Applied Surface Science.DOI
  108. Fuchi Wang, Zhaohui Zhang, Yongjun Sun, Ying Liu, Zhiyu Hu, Hu Wang, Alexander V. Korznikov, Elena Aleksandrovna Korznikova, Zhenfeng Liu, S. Osamu (2015). Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites. Carbon.DOI
  109. Liaoyu Xue, Fuchi Wang, Zhuang Ma, Yangwei Wang (2015). Effects of surface-oxidation modification and heat treatment on silicon carbide 3D/AlCu 5 MgTi composites during vacuum-pressure infiltration. Applied Surface Science.DOI
  110. Jintao Liu, Qunbo Fan, Hongnian Cai, Fuchi Wang (2015). Underlying mechanism of periodical adiabatic shear bands generated in Ti–6Al–4V target by projectile impact. Materials & Design.DOI
  111. Linlin Wang, Qunbo Fan, Yanbo Liu, Guoju Li, Hongmei Zhang, Quansheng Wang, Fuchi Wang (2015). Simulation of damage and failure processes of thermal barrier coatings subjected to a uniaxial tensile load. Materials & Design.DOI
  112. Yumeng Luo, Jinxu Liu, Xingwang Cheng, Shukui Li, Fuchi Wang, Wenwen Guo (2015). Adiabatic shear banding of hot‐rolling Ti–6Al–4V alloy subjected to dynamic shearing and uniaxial dynamic compression. Rare Metals.DOI
  113. Chao Zheng, Fuchi Wang, Xingwang Cheng, Jinxu Liu, FU Ke-qin, Tengteng Liu, Zhengxin Zhu, Kaiwen Yang, Meiqi Peng, Dan Jin (2015). Failure mechanisms in ballistic performance of Ti–6Al–4V targets having equiaxed and lamellar microstructures. International Journal of Impact Engineering.DOI
  114. Lihong Gao, Zhuang Ma, Fuchi Wang, Wenzhi Li (2015). Reflectivity and laser irradiation of plasma sprayed Al coating. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  115. Wenzhi Li, Zhuang Ma, Lihong Gao, Fuchi Wang (2015). Preparation and Electrical Properties of La0.9Sr0.1TiO3+δ. Materials.DOI
  116. Shirui Yang, Chengwen Tan, Xiaodong Yu, Kexue Liu, Zhankao Wang, Yandong Wang, Honglei Ma, Fuchi Wang, Hongnian Cai (2015). A study of CVD growth kinetics and morphological evolution of rhenium from ReCl5. Surface and Coatings Technology.DOI
  117. Liaoyu Xue, Fuchi Wang, Zhuang Ma, Yangwei Wang (2015). The effect of surface oxidized modification on the mechanical properties of SiC3D/Al. Applied Surface Science.DOI
  118. Ling Liu, Yinghua Wang, Zhuang Ma, Fuchi Wang, Mingming Zhu (2015). Preparation and thermophysical properties of Yb-doped Ba2DyAlO5 ceramics. Materials Letters.DOI
  119. 潘媚娟,马壮,王扬卫,王富耻(2014). 三维网络陶瓷骨架增强树脂基复合材料的制备及力学性能研究. 《第十八届全国高技术陶瓷学术年会》.
  120. 薛辽豫,王富耻,王扬卫,马壮,王皓(2014). 合金元素对SiC/Al双连通复合材料力学性能的影响. 《稀有金属材料与工程》.
  121. 李淑华,沈大为,祖媛媛,曲长征,王富耻,冯顺山(2014). 2A06铝合金表面微弧氧化陶瓷层摩擦学特性. 《稀有金属材料与工程》.
  122. Fuchi Wang, Xu Zhang, Yangwei Wang, Lu Wang, Zhuang Ma, Qunbo Fan (2014). Damage characteristic of interpenetrating phase composites under dynamic loading. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  123. 范金娟,常振东,陶春虎,王富耻(2014). Si/Mullite/Er2SiO5新型环境障涂层的1350℃氧化行为. 《材料工程》.
  124. Linlin Wang, Qunbo Fan, Guoju Li, Hongmei Zhang, Fuchi Wang (2014). Experimental observation and numerical simulation of SiC3D/Al interpenetrating phase composite material subjected to a three-point bending load. Computational Materials Science.DOI
  125. Zhenfeng Liu, Zhao-Hui Zhang, Ji-Fang Lu, Alexander V. Korznikov, Elena Aleksandrovna Korznikova, Fuchi Wang (2014). Effect of sintering temperature on microstructures and mechanical properties of spark plasma sintered nanocrystalline aluminum. Materials & Design (1980-2015).DOI
  126. Guoju Li, Xu Zhang, Qunbo Fan, Linlin Wang, Hongmei Zhang, Fuchi Wang, Yangwei Wang (2014). Simulation of damage and failure processes of interpenetrating SiC/Al composites subjected to dynamic compressive loading. Acta Materialia.DOI
  127. Lihong Gao, Zhuang Ma, Song Wang, Fuchi Wang, Cai Ping Yang (2014). Structural and Optical Properties of La1−xSrxTiO3+δ. Materials.DOI
  128. LI Rong-ting, Qunbo Fan, Ruihua Gao, Li Rui Huo, Fuchi Wang, Yangwei Wang (2014). Effects of dynamic mechanical properties on the ballistic performance of a new near-β titanium alloy Ti684. Materials & Design (1980-2015).DOI
  129. Fuchi Wang, Xu Zhang, Yangwei Wang, Qunbo Fan, Guoju Li (2014). Damage evolution and distribution of interpenetrating phase composites under dynamic loading. Ceramics International.DOI
  130. Chao Zheng, Fuchi Wang, Xingwang Cheng, FU Ke-qin, Jinxu Liu, Yufeng Wang, Tengteng Liu, Zhengxin Zhu (2014). Effect of microstructures on ballistic impact property of Ti–6Al–4V targets. Materials Science and Engineering A.DOI
  131. Bo Wen, Zhuang Ma, Yanbo Liu, Fuchi Wang, Hongnian Cai, Lihong Gao (2014). Supersonic flame ablation resistance of W/ZrC coating deposited on C/SiC composites by atmosphere plasma spraying. Ceramics International.DOI
  132. Kai Sun, Xiaodong Yu, Chengwen Tan, Honglei Ma, Fuchi Wang, Hongnian Cai (2014). Influence of adiabatic shear bands intersection on the ballistic impact of Ti–6Al–4V alloys with three microstructures. Materials Science and Engineering A.DOI
  133. Wei-chen ZHAI, Zhao-hui ZHANG, Fuchi Wang, Xiang-Bo Shen, Shu-Kui Lee, Lu Wang (2014). Effect of Si content on microstructure and properties of Si/Al composites. Transactions of Nonferrous Metals Society of China.DOI
  134. Fuchi Wang, Wenqi Guo, Jinxu Liu, Shukui Li, Jingyi Zhou (2014). Microstructural evolution and grain refinement mechanism of pure tungsten under explosive loading condition. International Journal of Refractory Metals and Hard Materials.DOI
  135. Zhaohui Zhang, Zhen-Feng Liu, Ji-Fang Lu, Xiang-Bo Shen, Fuchi Wang, Yandong Wang (2014). The sintering mechanism in spark plasma sintering – Proof of the occurrence of spark discharge. Scripta Materialia.DOI
  136. Qiu-Rong Yang, Jinxu Liu, Shukui Li, Fuchi Wang, Tengteng Wu (2014). Fabrication and mechanical properties of Cu-coatedwoven carbon fibers reinforced aluminum alloy composite. Materials & Design (1980-2015).DOI
  137. 李淑华,沈大为,孙凯,谭成文,王富耻,冯顺山(2013). Ti-6Al-4V合金弹着点及其周围组织变化与损伤. 《稀有金属材料与工程》.
  138. 李淑华,沈大为,孙凯,谭成文,王富耻,冯顺山(2013). Ti-6Al-4V合金两次侵彻弹着点损伤及组织演化. 《稀有金属材料与工程》.
  139. 张朝晖,神祥博,王富耻,魏赛,李树奎,才鸿年(2013). 放电等离子烧结TiB/Ti-1.5Fe-2.25Mo复合材料的微观组织与力学性能(英文). Transactions of Nonferrous Metals Society of China.
  140. 杨彩,王富耻,马壮,卢林(2013). 放电等离子烧结制备LaTiO3的反应过程研究. 《人工晶体学报》.
  141. Wei Shen, Qunbo Fan, Fuchi Wang, Zhuang Ma (2013). The influence of defects on the effective Young's modulus of a defective solid. Chinese Physics B.DOI
  142. Liu Jintao, Cai Hongnian, Wang Fu-chi, Fan Qunbo (2013). Multiscale Numerical Simulation of the Shaped Charge Jet Generated from Tungsten-Copper Powder Liner. Journal of Physics Conference Series.DOI
  143. Guoju Li, Fan Qunbo, Wu Zheng, Xu Zhang, Wang Yangwei, Wang Fu-chi (2013). Modeling the Dynamic Damage Process of the SiC3d/Al Interpenetrating Phase Composites. Journal of Physics Conference Series.DOI
  144. LI Bo-wen, Zhuang Ma, Wang Yangwei, Wang Fu-chi (2013). The influencing mechanism of modification layer on the performance of SiC3D/Al multi-function gradient composite. Journal of Physics Conference Series.DOI
  145. Ruihua Gao, Fan Qunbo, Wang Fu-chi (2013). Numerical Simulation in relation to Adiabatic Shearing Behaviors in Titanium Alloy. Journal of Physics Conference Series.DOI
  146. Kai Sun, Xiaodong Yu, Chengwen Tan, Honglei Ma, Fuchi Wang, Hongnian Cai (2013). Effect of microstructure on adiabatic shear band bifurcation in Ti–6Al–4V alloys under ballistic impact. Materials Science and Engineering A.DOI
  147. Yanwei Lv, Xiaodong Yu, Fuchi Wang, Chengwen Tan, Yang Qi-fa, Jianping Zheng, Zhendong Wang, Hongnian Cai (2013). Vapor phase epitaxy of monocrystal tungsten coatings. Journal of Crystal Growth.DOI
  148. Lu Lin, Fuchi Wang, Zhuang Ma, Qunbo Fan (2013). Anisotropic effect of splat interface on thermal conductivity of plasma sprayed YSZ coating. Surface and Coatings Technology.DOI
  149. Zhao-hui ZHANG, Xiang-Bo Shen, Fuchi Wang, Sai Nan Wei, Shukui Li, Hongnian Cai (2013). Microstructure characteristics and mechanical properties of TiB/Ti-1.5Fe-2.25Mo composites synthesized in situ using SPS process. Transactions of Nonferrous Metals Society of China.DOI
  150. Yu Ren, Fuchi Wang, Chengwen Tan, Shuyou Wang, Xiaodong Yu, Jianwei Jiang, Hongnian Cai (2013). Effect of shock-induced martensite transformation on the postshock mechanical response of metastable β titanium alloys. Journal of Alloys and Compounds.DOI
  151. Lin Lu, Fuchi Wang, Zhuang Ma (2013). Laser irradiation effect on plasma sprayed YSZ coating. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  152. Yu Ren, Fuchi Wang, Chengwen Tan, Shuyou Wang, Xiaodong Yu, Jianwei Jiang, Honglei Ma, Hongnian Cai (2013). Shock-induced mechanical response and spall fracture behavior of an extra-low interstitial grade Ti–6Al–4V alloy. Materials Science and Engineering A.DOI
  153. Zhao-Hui Zhang, Long Hao Qi, Xiang-Bo Shen, Fuchi Wang, Shu-Kui Lee (2013). Microstructure and mechanical properties of bulk carbon nanotubes compacted by spark plasma sintering. Materials Science and Engineering A.DOI
  154. Lin Lu, Zhuang Ma, Fuchi Wang, Yanbo Liu (2013). Friction and wear behaviors of Al 2 O 3 –13 wt%TiO 2 coatings. Rare Metals.DOI
  155. 张旭,王富耻,王扬卫,王鲁,韩晶(2012). 冲击载荷下三维连通陶瓷-金属复合材料的动态响应. 《第十七届全国高技术陶瓷学术年会》.
  156. 张帆,郝敏,谭成文,于晓东,王富耻,才鸿年(2012). Mg-Gd-Y与AZ31两种变形镁合金的冲击波响应. 《稀有金属》.
  157. 熊盼,王扬卫,王富耻,高举斌,王鲁(2012). 约束应力对SiC/Al复合材料动态硬度的影响. 《第十七届全国高技术陶瓷学术年会》.
  158. 韩晶,朱时珍,王扬卫,徐强,马壮,张旭,王富耻(2012). SiC骨架/Al复合材料恒应变率下SHPB压缩性能研究. 《第十七届全国高技术陶瓷学术年会摘要集》.
  159. 刘玲,马壮,王富耻,朱时珍,徐强(2012). 复杂稀土锆酸盐陶瓷的结构及其介电性能研究(英文). 《稀有金属材料与工程》.
  160. 张志金,于晓东,王扬卫,王富耻,李凯,栾志强(2012). 发泡条件对炭泡沫孔泡结构的影响. 《北京理工大学学报》.
  161. 杨杰,李树奎,王富耻(2012). 以气凝胶为夹层的复合结构抗弹性能研究. 《兵工学报》.
  162. 成志芳,王富耻,苏龙江,马壮(2012). 等离子喷涂Al2O3-13%TiO2涂层的组织结构与性能分析. 《实验技术与管理》.
  163. 卢林,王富耻,马壮,曹玄(2012). 孔隙特征对等离子喷涂YSZ涂层的热传导各向异性的影响. 《第十七届全国高技术陶瓷学术年会》.
  164. 郭启雯,才鸿年,王富耻,张洪梅,杨春,程建(2012). 材料数据库系统在选材评价中的综合应用研究. 《材料工程》.
  165. 杨彩,王富耻,马壮(2012). SPS烧结制备LaTiO 3 过程中的相转变. 《第十七届全国高技术陶瓷学术年会》.
  166. 文波,马壮,柳彦博,王富耻,才鸿年(2012). 石墨基体表面等离子喷涂陶瓷涂层的耐烧蚀性能. 《第十七届全国高技术陶瓷学术年会》.
  167. 高举斌,王扬卫,王富耻,韩国锋(2012). 中间夹层对陶瓷金属复合装甲抗弹性能的影响研究. 《第十七届全国高技术陶瓷学术年会》.
  168. 李淑华,沈大为,祖媛媛,王富耻,冯顺山,尹玉军,曲长征(2012). Al-Cu-Mg合金表面微弧氧化陶瓷层磨损性能研究. 《第十七届全国高技术陶瓷学术年会摘要集》.
  169. Shen Wei, Wang Fu-chi, Fan Qunbo, Zhuang Ma (2012). Lifetime prediction of plasma-sprayed thermal barrier coating systems. Surface and Coatings Technology.DOI
  170. Zhaohui Zhang, Xiang-Bo Shen, Chao Zhang, Sai Nan Wei, Shu-Kui Lee, Fuchi Wang (2012). A new rapid route to in-situ synthesize TiB–Ti system functionally graded materials using spark plasma sintering method. Materials Science and Engineering A.DOI
  171. Yu Ren, Fuchi Wang, Shuyou Wang, Chengwen Tan, Xiaodong Yu, Jianwei Jiang, Hongnian Cai (2012). Mechanical response and effects of β-to-α" phase transformation on the strengthening of Ti–10V–2Fe–3Al during one-dimensional shock loading. Materials Science and Engineering A.DOI
  172. Fuchi Wang, Dongmei Huo, Shukui Li, Qunbo Fan (2012). Inducing TiAl3 in titanium alloys by electric pulse heat treatment improves mechanical properties. Journal of Alloys and Compounds.DOI
  173. Sai Nan Wei, Zhao-Hui Zhang, Fuchi Wang, Xiang-Bo Shen, Hongnian Cai, Shu-Kui Lee, Lu Wang (2012). Effect of Ti content and sintering temperature on the microstructures and mechanical properties of TiB reinforced titanium composites synthesized by SPS process. Materials Science and Engineering A.DOI
  174. Chen Chen, Yunfei Xue, Lu Wang, Xingwang Cheng, Fuchi Wang, Zhengbin Wang, Haifeng Zhang, Aiming Wang (2012). Effect of Temperature on the Dynamic Mechanical Behaviors of Zr‐Based Metallic Glass Reinforced Porous Tungsten Matrix Composite. Advanced Engineering Materials.DOI
  175. Sai Nan Wei, Zhao-Hui Zhang, Xiang-Bo Shen, Fuchi Wang, Mingyan Sun, Rui Liang Yang, Shu-Kui Lee (2012). Simulation of temperature and stress distributions in functionally graded materials synthesized by a spark plasma sintering process. Computational Materials Science.DOI
  176. 李淼,徐强,朱时珍,王鲁,王富耻(2011). Hf6Ta2O17材料的合成和热膨胀性能. 《稀有金属材料与工程》.
  177. 张帆,张可翔,谭成文,于晓东,马红磊,王富耻,才鸿年(2011). 等径角挤压处理后的Mg-Gd-Y-Zr合金的微观组织和力学性能(英文). Transactions of Nonferrous Metals Society of China.
  178. 文波,马壮,王富耻,柳彦博,王全胜(2011). 石墨基体等离子喷涂TiC涂层耐烧蚀性能研究. 《北京理工大学学报》.
  179. 郭启雯,才鸿年,王富耻,李仲平,陈祥宝,程兴旺(2011). 材料体系数据库系统技术框架构建研究(英文). 《稀有金属材料与工程》.
  180. 杨杰,李树奎,王富耻(2011). 气凝胶复合材料抗弹性能的研究. 《北京理工大学学报》.
  181. 倪川皓,王富耻,徐强,马壮,王扬卫(2011). 超高速碰撞下体心立方纯铁的变形孪晶. 《北京理工大学学报》.
  182. 张帆,谭成文,于晓东,马红磊,王富耻,才鸿年(2011). 应变率对Mg-Gd-Y合金断裂机制的影响. 《稀有金属》.
  183. 倪川皓,徐强,杨素媛,王富耻(2011). 超高速碰撞AZ31镁合金和纯铁靶板弹坑底部超细晶形成机制. 《稀有金属》.
  184. 张红松,时蕾,杨树森,徐强,王富耻,王全胜(2011). 高能等离子喷涂Sm2Zr2O7热障涂层及其热冲击性能. 《材料热处理学报》.DOI
  185. 郭启雯,才鸿年,王富耻,张洪梅(2011). 材料适用性评价模型构建研究. 《材料工程》.
  186. 张静,谭成文,任宇,于晓东,马红磊,王富耻,才鸿年(2011). Ti-6Al-4V合金中的绝热剪切断裂(英文). Transactions of Nonferrous Metals Society of China.
  187. 倪川皓,徐强,王富耻(2011). 超高速碰撞下纯铁靶板晶粒的细化过程(英文). Transactions of Nonferrous Metals Society of China.
  188. 任宇,谭成文,张静,王富耻(2011). Taylor杆冲击条件下Ti-6Al-4V合金的动态断裂(英文). Transactions of Nonferrous Metals Society of China.
  189. 张静,谭成文,任宇,王富耻,才鸿年(2011). 电子束焊接Ti-6Al-4V合金的准静态和动态拉伸行为(英文). Transactions of Nonferrous Metals Society of China.
  190. 张帆,谭成文,张蓬勃,王富耻,才鸿年(2011). Mg-Gd-Y-Zr合金中析出相的异常粗化行为(英文). 《2011中国材料研讨会论文摘要集》.
  191. Yu Ren, Chengwen Tan, Jing Zhang, Fuchi Wang (2011). Dynamic fracture of Ti-6Al-4V alloy in Taylor impact test. Transactions of Nonferrous Metals Society of China.DOI
  192. Jing Zhang, Chengwen Tan, Yu Ren, Fuchi Wang, Hongnian Cai (2011). Quasi-static and dynamic tensile behaviors in electron beam welded Ti-6Al-4V alloy. Transactions of Nonferrous Metals Society of China.DOI
  193. Shen Wei, Wang Fu-chi, Fan Qunbo, Zhuang Ma (2011). Effects of defects on the effective thermal conductivity of thermal barrier coatings. Applied Mathematical Modelling.DOI
  194. Wang Fu-chi (2011). Research on the Anti-Bullet Properties of Aerogel Composite Materials. Transactions of Beijing Institute of Technology.
  195. Yunfei Xue, Lu Wang, Xingwang Cheng, Fuchi Wang, Huanwu Cheng, Haifeng Zhang, Aiming Wang (2011). Strain rate dependent plastic mutation in a bulk metallic glass under compression. Materials & Design (1980-2015).DOI
  196. Zhao-Hui Zhang, Xiang-Bo Shen, Fuchi Wang, Shu-Kui Lee, Qunbo Fan, Mao‐Sheng Cao (2011). Low-temperature densification of TiB2 ceramic by the spark plasma sintering process with Ti as a sintering aid. Scripta Materialia.DOI
  197. Jing Zhang, Chengwen Tan, Yu Ren, Xiaodong Yu, Honglei Ma, Fuchi Wang, Hongnian Cai (2011). Adiabatic shear fracture in Ti-6Al-4V alloy. Transactions of Nonferrous Metals Society of China.DOI
  198. Fan Zhang, Kexiang Zhang, Chengwen Tan, Xiaodong Yu, Honglei Ma, Fuchi Wang, Hongnian Cai (2011). Microstructure and mechanical properties of Mg-Gd-Y-Zr alloy processed by equal channel angular pressing. Transactions of Nonferrous Metals Society of China.DOI
  199. Dongmei Huo, Shukui Li, Qunbo Fan, Fuchi Wang (2011). Effects of electric pulse heat treatment on microstructures and dynamic deformation behaviors of Ti6441 alloys. Materials Science and Engineering A.DOI
  200. Yanwei Lv, Xiaodong Yu, Chengwen Tan, Honglei Ma, Jianping Zheng, Fuchi Wang, Hongnian Cai (2011). Deposition temperature effects on tungsten single-crystal layer by chemical vapor transport. Journal of Crystal Growth.DOI
  201. Zhaohui Zhang, Xiang-Bo Shen, Fuchi Wang, Shu-Kui Lee (2011). A New Rapid Route for In Situ Synthesizing Monolithic TiB Ceramic. Journal of the American Ceramic Society.DOI
  202. Xiang-Bo Shen, Zhaohui Zhang, Sai Nan Wei, Fuchi Wang, Shu-Kui Lee (2011). Microstructures and mechanical properties of the in situ TiB–Ti metal–matrix composites synthesized by spark plasma sintering process. Journal of Alloys and Compounds.DOI
  203. Chuan-hao NI, Qiang Xu, Fuchi Wang (2011). Grain refinement process of pure iron target under hypervelocity impact. Transactions of Nonferrous Metals Society of China.DOI
  204. Hamza Cheloui, Zhaohui Zhang, Xiang-Bo Shen, Fuchi Wang, Shu-Kui Lee (2011). Microstructure and mechanical properties of TiB–TiB2 ceramic matrix composites fabricated by spark plasma sintering. Materials Science and Engineering A.DOI
  205. Ling Liu, Fuchi Wang, Zhuang Ma, Qiang Xu, Shige Fang (2011). Thermophysical Properties of (Mg x La 0.5−x Sm 0.5 ) 2 (Zr 0.7 Ce 0.3 ) 2 O 7−x (x=0, 0.1, 0.2, 0.3) Ceramic for Thermal Barrier Coatings. Journal of the American Ceramic Society.DOI
  206. 刘玲,徐强,朱时珍,王富耻(2010). 溶胶-凝胶法制备稀土锆酸盐陶瓷的结构及介电性能. 《稀有金属材料与工程》.
  207. 陈志永,才鸿年,王富耻,谭成文,胡韶华,京方程(2010). 热轧TB2钛合金织构多晶板动态压缩性能的各向异性. 《稀有金属材料与工程》.
  208. 孙坤,程兴旺,自兴发,刘瑞明,王富耻(2010). Ti-5Al-2.5Sn合金绝热剪切带的形成机制. 《稀有金属材料与工程》.
  209. 王迎春,李树奎,王富耻,罗鸿志(2010). 放电等离子烧结温度对钨合金的组织及动态力学性能的影响. 《稀有金属材料与工程》.
  210. 孙红婵,李树奎,于小东,谭成文,王富耻(2010). 化学气相沉积高纯钨的择优取向与性能研究. 《稀有金属材料与工程》.
  211. 关丽雅,郑秀华,王富耻,李树奎(2010). 电铸Cu的显微组织、晶粒取向和晶界结构. 《北京理工大学学报》.
  212. 沈伟,范群波,王富耻,马壮(2010). 基于涂层显微组织图片的拉伸实验有限元数值模拟. 《北京理工大学学报》.
  213. 王扬卫,于晓东,王璀轶,高举斌,王富耻(2010). 准脆性SiCp/Al复合材料SHPB实验中入射波整形技术. 《北京理工大学学报》.
  214. 胡欣,王扬卫,高举斌,于晓东,王富耻(2010). 约束应力对AD95陶瓷弹击损伤特征的影响. 《北京理工大学学报》.
  215. 王会珍,李云凯,李树奎,王富耻(2010). 83钢回火温度与力学性能的关系. 《材料热处理学报》.DOI
  216. 杨杰,李树奎,王富耻,闫丽丽,霍咚梅(2010). 玻璃纤维增强气凝胶防护性能的研究. 《北京理工大学学报》.
  217. 神祥博,张朝晖,王富耻,李树奎(2010). 放电等离子烧结法制备TiB陶瓷刀具材料的显微结构和力学性能. 《模具制造》.
  218. 张朝晖,罗杰,黄橙骋,王富耻,李树奎(2010). TiB-TiB2陶瓷复合材料的放电等离子烧结致密化. 《北京理工大学学报》.
  219. 卢林,马壮,王富耻,柳彦博(2010). 等离子喷涂纳米和微米Al2O3-TiO2涂层摩擦磨损性能研究. 《北京理工大学学报》.
  220. 张朝晖,陈焕德,王富耻,李树奎(2010). 93钨合金的稀土改性机理. 《北京理工大学学报》.
  221. 周正,王鲁,贺定勇,柳彦博,王富耻(2010). 超音速火焰喷涂Fe基非晶合金涂层的腐蚀与磨损性能研究. 《第八届全国表面工程学术会议暨第三届青年表面工程学术论坛论文集(四)》.
  222. 王扬卫,马壮,于晓东,王富耻,胡欣(2010). 几种典型材料的动态硬度研究. 《材料工程》.
  223. 刘玲,王富耻,马壮,徐强,房师阁(2010). (Mg 0.05 La 0.45 Sm 0.5 ) 2 (Zr 0.7 Ce 0.3 ) 2 O 6.95 陶瓷的制备与导热性能研究. 《第十六届全国高技术陶瓷学术年会摘要集》.
  224. 杨杰,李树奎,闫丽丽,王富耻(2010). 二氧化硅气凝胶的防爆震性能及机理研究. 《物理学报》.
  225. 沈伟,范群波,王富耻,马壮,杨学文(2010). 基于数字图像处理技术的等离子喷涂氧化锆涂层热导率影响因素有限元研究. 《无机材料学报》.
  226. Jie Yang, Shukui Li, Yumeng Luo, Lili Yan, Fuchi Wang (2010). Compressive properties and fracture behavior of ceramic fiber-reinforced carbon aerogel under quasi-static and dynamic loading. Carbon.DOI
  227. Zhao-Hui Zhang, Fuchi Wang, Jie Luo, Shu-Kui Lee, Lu Wang (2010). Microstructures and mechanical properties of spark plasma sintered Al–SiC composites containing high volume fraction of SiC. Materials Science and Engineering A.DOI
  228. Yangwei Wang, Fuchi Wang, Xiaodong Yu, Zhuang Ma, Jubin Gao, Kang Xiao-peng (2010). Effect of interlayer on stress wave propagation in CMC/RHA multi-layered structure. Composites Science and Technology.DOI
  229. Zhao-hui Zhang, Xiang-Bo Shen, Sai Wen, Jie Luo, Shu-Kui Lee, Fuchi Wang (2010). In situ reaction synthesis of Ti–TiB composites containing high volume fraction of TiB by spark plasma sintering process. Journal of Alloys and Compounds.DOI
  230. Jie Yang, Shukui Li, Lili Yan, Jinxu Liu, Fuchi Wang (2010). Compressive behaviors and morphological changes of resorcinol–formaldehyde aerogel at high strain rates. Microporous and Mesoporous Materials.DOI
  231. Yunfei Xue, Lu Wang, Huanwu Cheng, Fuchi Wang, Haifeng Zhang, Aiming Wang (2010). Dynamic Tensile Property of Zr-based Metallic Glass/Porous W Phase Composite. Journal of Material Science and Technology.DOI
  232. Shen Wei, Wang Fu-chi, Fan Qunbo, Zhuang Ma, Yang Xue-wen (2010). Finite element simulation of tensile bond strength of atmospheric plasma spraying thermal barrier coatings. Surface and Coatings Technology.DOI
  233. Shen Wei, Wang Fu-chi, Fan Qunbo, Hua Dan, Zhuang Ma (2010). Proposal of new expressions for effects of splat interfaces and defects on effective properties of thermal barrier coatings. Surface and Coatings Technology.DOI
  234. Wang Fu-chi (2010). Effect of Confined Stress on Impact Damage of Ceramic AD95. Transactions of Beijing Institute of Technology.
  235. Wang Fu-chi (2010). Effect of tempering temperature on mechanical properties of 83 steel. Cailiao rechuli xuebao.
  236. Wang Fu-chi (2010). Incidence Pulse Shaping Techniques for Testing Quasi-Brittle SiC_p/Al Composites with SHPB. Transactions of Beijing Institute of Technology.
  237. 张红松,胡仁喜,徐强,王富耻,刘玲(2009). La2O3,CeO2掺杂Sm2Zr2O7陶瓷制备及热物理性能. 《稀有金属材料与工程》.
  238. 张志金,王扬卫,于晓东,王富耻,李凯,栾志强(2009). 三维网络SiC多孔陶瓷增强铝基复合材料的制备. 《稀有金属材料与工程》.
  239. 高丽红,王富耻,马壮,柳彦博,李东荣,沈立娜(2009). Al2O3的能带结构和光学函数的关系. 《稀有金属材料与工程》.
  240. 李淼,徐强,王富耻(2009). Ce元素掺杂Sm2Zr2O7材料的合成和热膨胀性能. 《稀有金属材料与工程》.
  241. 徐强,刘笑笑,刘玲,朱时珍,王富耻(2009). 碳纳米管对Sm2Zr2O7热障涂层陶瓷无压烧结致密化的影响. 《稀有金属材料与工程》.
  242. 胡欣,王富耻,王扬卫,于晓东,马壮(2009). 约束应力对AD95陶瓷动态硬度的影响. 《稀有金属材料与工程》.
  243. 关丽雅,郑秀华,王富耻,李树奎(2009). 电流密度对电铸铜晶粒组织的影响. 《稀有金属材料与工程》.
  244. 吴园园,谭成文,杨勇彪,王富耻,才鸿年(2009). 高应变率下AZ31B镁合金力学行为各向异性. 《稀有金属材料与工程》.
  245. 孙坤,王富耻,程兴旺,苗普,赵双赞(2009). TC6钛合金不同组织绝热剪切带的形成机理. 《稀有金属材料与工程》.
  246. 张志金,王富耻,于晓东,王扬卫,巩延亮,李凯,栾志强(2009). 网络陶瓷增强金属复合材料的研究现状. 《材料导报》.
  247. 张静,谭成文,刘新芹,王富耻,才鸿年(2009). Ti-6Al-4V合金绝热剪切带的演化. 《稀有金属》.
  248. 杨素媛,才鸿年,王富耻(2009). 动态加载条件下细晶镁合金的组织特征及形成机制. 《北京理工大学学报》.
  249. 孙坤,王富耻,程兴旺,苗普,赵双赞(2009). TC6钛合金绝热剪切带不同发展阶段的精细结构. 《稀有金属材料与工程》.
  250. 刘玲,徐强,王富耻,李涛(2009). 反应介质对单分散二氧化硅微球的影响. 《稀有金属材料与工程》.
  251. 杨勇彪,王富耻,谭成文,才鸿年(2009). 冲击加载条件下AZ31B镁合金变形孪晶的微观特征. 《兵工学报》.
  252. 胡欣,王富耻,王扬卫,于晓东(2009). 穿甲过程中的Dwell现象. 《材料导报》.
  253. 王扬卫,于晓东,王富耻,马壮,韩国峰(2009). Si3N4p/Al复合材料动态压缩性能研究. 《特种铸造及有色合金》.
  254. 李淑华,王富耻,谭成文,陈志勇(2009). 工业纯钛TA2剪切带中微观组织的演变. 《材料科学与工艺》.
  255. 陈志永,才鸿年,王富耻,谭成文,詹从堃,刘楚明(2009). 冷轧Cu板动态压缩力学性能各向异性的研究. 《金属学报》.
  256. Zhang Hongsong, Kun Sun, Qiang Xu, Fuchi Wang, Ling Liu (2009). Thermal conductivity of (Sm1–xLax)2Zr2O7 (x=0, 0.25, 0.5, 0.75 and 1) oxides for advanced thermal barrier coatings. Journal of Rare Earths.DOI
  257. 沈伟,范群波,王富耻,马壮(2009). 基于显微组织图片的涂层热导率有限元计算研究. 《人工晶体学报》.
  258. 关丽雅,郑秀华,王富耻,李树奎,吕广庶(2009). 电铸铜微观组织与织构的研究. 《电镀与涂饰》.
  259. 杨勇彪,王富耻,谭成文,才鸿年(2009). 高应变率加载下AZ31镁合金板材变形局域化各向异性. 《南京大学学报(自然科学)》.
  260. 郭启雯,才鸿年,王富耻,程兴旺,王舒迟,范群波(2009). 材料适用性评价指标体系构建研究. 《材料工程》.
  261. Zheng Zhou, Lu Wang, Fuchi Wang, Yanbo Liu (2009). Formation and corrosion behavior of Fe-based amorphous metallic coatings prepared by detonation gun spraying. Transactions of Nonferrous Metals Society of China.DOI
  262. Zhao-Hui Zhang, Fuchi Wang, Jie Luo, Shu-Kui Lee, Lu Wang (2009). Processing and characterization of fine-grained monolithic SiC ceramic synthesized by spark plasma sintering. Materials Science and Engineering A.DOI
  263. Jie Yang, Shukui Li, Lili Yan, Dongmei Huo, Fuchi Wang (2009). Dynamic compressive properties and failure mechanism of glass fiber reinforced silica hydrogel. Materials Science and Engineering A.DOI
  264. Fuchi Wang, Zhao-hui Zhang, Jie Luo, Chengcheng Huang, Shu-Kui Lee (2009). A novel rapid route for in situ synthesizing TiB–TiB2 composites. Composites Science and Technology.DOI
  265. Zhang Hongsong, Kun Sun, Qiang Xu, Fuchi Wang, Ling Liu, Yuan Wei, Xiaoge Chen (2009). Thermophysical properties of Sm 2 (Zr 1− x Ce x ) 2 O 7 ceramics. Rare Metals.DOI
  266. Hong-song Zhang, Kun Sun, Qiang Xu, Fuchi Wang, Ling Liu (2009). Preparation and Thermal Conductivity of Sm2(Zr0.6Ce0.4)2O7 Ceramic. Journal of Materials Engineering and Performance.DOI
  267. Shen Wei, Fan Qunbo, Wang Fu-chi, Zhuang Ma (2009). Modeling of micro-crack growth during thermal shock based on microstructural images of thermal barrier coatings. Computational Materials Science.DOI
  268. Fan Qunbo, Wang Fu-chi, Lu Wang, Zhuang Ma (2009). Microstructure-Based Prediction of Properties for Thermal Barrier Coatings. Thermal spray.DOI
  269. Fan Qunbo, Feng Zhang, Wang Fu-chi, Lu Wang (2009). Molecular dynamics calculation of thermal expansion coefficient of a series of rare-earth zirconates. Computational Materials Science.DOI
  270. Wang Fu-chi (2009). Microstructure of Fine-Magnesium and Its Mechanism of Formation Under Dynamic Loading Condition. Transactions of Beijing Institute of Technology.
  271. 王扬卫,于晓东,王富耻,马壮,张维官(2008). 无压浸渗制备Si3N4/AlN-Al复合材料的力学性能. 《特种铸造及有色合金》.DOI
  272. 刘笑笑,徐强,才鸿年,严振宇,王富耻(2008). Sm 2 Zr 2 O 7 -碳纳米管复合材料的制备与韧性. 《第十五届全国高技术陶瓷学术年会摘要集》.
  273. 王扬卫,王富耻,王璀轶,于晓东,马壮(2008). 颗粒增强铝基复合材料高应变率行为. 《第十五届全国复合材料学术会议》.
  274. 王扬卫,张维官,田擎东,王一鸣,王富耻(2008). 挤压铸造B4Cp/2024Al复合材料力学性能研究. 《特种铸造及有色合金》.
  275. 刘玲,徐强,朱时珍,张红松,王富耻(2008). (Gd0.4Sm0.5Yb0.1)2Zr2O7粉体的共沉淀及sol-gel合成. 《稀有金属材料与工程》.
  276. 翟华嶂,安晓强,曹传宝,王富耻,才鸿年(2008). MgO单晶一维纳米结构的制备与表征. 《稀有金属材料与工程》.
  277. 程兴旺,孙坤,王富耻(2008). Ti-15Mo-3Al-2.7Nb-0.2Si钛合金绝热剪切带的微观结构演化. 《稀有金属材料与工程》.
  278. 孙坤,程兴旺,王富耻,苗普,赵双赞(2008). 组织及应变率对TC6钛合金绝热剪切敏感性的影响. 《稀有金属材料与工程》.
  279. 刘新芹,谭成文,张静,胡阳光,陈志永,王富耻,才鸿年(2008). 应力状态对Ti-6Al-4V绝热剪切敏感性的影响. 《稀有金属材料与工程》.
  280. 谭成文,刘新芹,陈志永,马红磊,王富耻,才鸿年(2008). Ti-6Al-4V合金绝热剪切敏感性与临界破碎速度关系研究. 《稀有金属材料与工程》.
  281. 王迎春,李树奎,王富耻(2008). 内爆炸载荷下钨含量对W-Ni-Fe高密度合金圆筒膨胀过程的影响. 《稀有金属材料与工程》.
  282. 于晓东,王扬卫,王富耻,邹优锐,高举斌(2008). 挤压铸造制备高体积含量SiCp/2024Al复合材料. 《材料工程》.
  283. 杨勇彪,王富耻,谭成文,吴园园,才鸿年(2008). 不同取样方向AZ31B镁合金应变率效应. 《兵工学报》.
  284. 郝桂亮,徐强,朱时珍,王富耻(2008). ZrO2对ZrB2-SiC复合材料中ZrB2生长机制的影响. 《兵工学报》.
  285. 王扬卫,于晓东,王富耻,张维官,马壮(2008). 热处理温度对Si3N4p/Al复合材料组织和性能的影响. 《材料热处理学报》.DOI
  286. 张红松,李振军,徐强,王富耻,王全胜,刘玲(2008). 大气等离子喷涂Sm2Zr2O7热障涂层的微观组织. 《材料热处理学报》.DOI
  287. 周正,王鲁,王富耻,程焕武,张海峰,徐赛华,王一鸣(2008). Fe基非晶合金涂层的微结构与性能研究. 《北京理工大学学报》.
  288. 张志金,王富耻,于晓东,邹优锐,李凯,栾志强(2008). 炭泡沫中Si含量对碳化硅多孔陶瓷组织和性能的影响. 《北京理工大学学报》.
  289. 周正,王鲁,王富耻,张海峰,程焕武,柳彦博,徐赛华(2008). Y对Fe50-xMo14Cr15C15B6Yx非晶合金非晶形成能力及耐腐蚀性能的影响. 《北京理工大学学报》.
  290. 姚志涛,王迎春,程兴旺,李树奎,王富耻(2008). Y2O3对93W-4.9Ni-2.1Fe合金力学性能及断裂过程的影响. 《兵器材料科学与工程》.
  291. 杨勇彪,王富耻,谭成文,才鸿年(2008). 镁合金动态力学行为研究进展. 《兵器材料科学与工程》.
  292. 陈晓鸽,张红松,徐强,王富耻,刘玲(2008). (Sm 0.5 La 0.5 ) 2 Zr 2 O 7 陶瓷材料的热物理性能. 《2008全国功能材料科技与产业高层论坛论文集》.
  293. 徐强,朱时珍,郝桂亮,刘璇,王富耻(2008). ZrB 2 -SiC复合材料界面非晶层的形成机理. 《第十五届全国复合材料学术会议论文集(上册)》.
  294. 王扬卫,王璀轶,于晓东,马壮,王富耻(2008). 70vol%SiCp/2024Al复合材料动态压缩性能和损伤特征研究. 《第十五届全国高技术陶瓷学术年会摘要集》.
  295. 张志金,王富耻,于晓东,王扬卫,李凯,栾志强(2008). 三维连通SiC多孔陶瓷增强铝基复合材料的制备. 《第十五届全国高技术陶瓷学术年会摘要集》.
  296. 李涛,徐强,刘玲,王富耻(2008). Sm 2 Zr 2 O 7 /SiO 2 复合材料的制备及介电性能研究. 《第十五届全国高技术陶瓷学术年会摘要集》.
  297. 严振宇,徐强,刘玲,刘笑笑,王富耻(2008). 热压烧结Sm 2 Zr 2 O 7 /SiC复合材料及其断裂韧性的研究. 《第十五届全国高技术陶瓷学术年会摘要集》.
  298. 刘璇,徐强,朱时珍,郝桂亮,王富耻(2008). B 4 C添加对ZrB 2 -SiC基超高温复合材料微观组织和力学性能的影响. 《第十五届全国高技术陶瓷学术年会摘要集》.
  299. 王扬卫,王璀轶,于晓东,马壮,王富耻(2008). 准脆性50vol%SiCp/Al复合材料SHPB实验中入射波整形技术. 《第十五届全国高技术陶瓷学术年会摘要集》.
  300. Yongbiao Yang, Fuchi Wang, Chengwen Tan, Yuanyuan Wu, Hongnian Cai (2008). Plastic deformation mechanisms of AZ31 magnesium alloy under high strain rate compression. Transactions of Nonferrous Metals Society of China.DOI
  301. Lin Hai-Bo, Cao Mao-Sheng, Yuan Jie, Dawei Wang, Quan-Liang Zhao, Wang Fu-chi (2008). Enhanced mechanical behaviour of lead zirconate titanate piezoelectric composites incorporating zinc oxide nanowhiskers. Chinese Physics B.DOI
  302. 张志金,王富耻,于晓东,邹优锐,李凯,栾志强(2008). SiC涂层对泡沫炭高温抗氧化性能的影响. 《表面技术》.
  303. 王富耻(2008). 静液挤压技术 = Hydrostatic Extrusion. 《国防工业出版社》.
  304. 张红松,陈晓鸽,徐强,王富耻,刘玲(2008). 热障涂层用氧化物稳定的ZrO2陶瓷材料研究现状. 《中国陶瓷》.
  305. Xinqin Liu, Chengwen Tan, Jing Zhang, Fuchi Wang, Hongnian Cai (2008). Correlation of adiabatic shearing behavior with fracture in Ti-6Al-4V alloys with different microstructures. International Journal of Impact Engineering.DOI
  306. Zhijin Zhang, Fuchi Wang, Xiaodong Yu, Yangwei Wang, Yinghui Yan, Kai Li, Zhiqiang Luan (2008). Porous Silicon Carbide Ceramics Produced by a Carbon Foam Derived from Mixtures of Mesophase Pitch and Si Particles. Journal of the American Ceramic Society.DOI
  307. Xinqin Liu, Chengwen Tan, Jing Zhang, Yangguang Hu, Honglei Ma, Fuchi Wang, Hongnian Cai (2008). Influence of microstructure and strain rate on adiabatic shearing behavior in Ti–6Al–4V alloys. Materials Science and Engineering A.DOI
  308. Haibo Lin, Mao‐Sheng Cao, Quan-Liang Zhao, Xiaoling Shi, Dawei Wang, Fuchi Wang (2008). Mechanical reinforcement and piezoelectric properties of nanocomposites embedded with ZnO nanowhiskers. Scripta Materialia.DOI
  309. Zhang Hongsong, Qiang Xu, Wang Fu-chi, Ling Liu, Wei Yuan, Chen Xiaoge (2008). Preparation and thermophysical properties of (Sm0.5La0.5)2Zr2O7 and (Sm0.5La0.5)2 (Zr0.8Ce0.2)2O7 ceramics for thermal barrier coatings. Journal of Alloys and Compounds.DOI
  310. Fan Qunbo, Wang Fu-chi, Huiling Zhang, Zhang Feng (2008). Study of ZrO2 phase structure and electronic properties. Molecular Simulation.DOI
  311. Fan Qunbo, Feng Zhang, Wang Fu-chi, Huiling Zhang (2008). Prediction of the intrinsic thermal conductivity of phonons in dielectric and semiconductor materials based on the density of the lattice vibration energy. Molecular Simulation.DOI
  312. Zhang Zhaohui, Wang Fu-chi, Lin Wang, Shukui Li, S. Osamu (2008). Sintering mechanism of large-scale ultrafine-grained copper prepared by SPS method. Materials Letters.DOI
  313. Ling Liu, Qiang Xu, Wang Fu-chi, Zhang Hongsong (2008). Thermophysical Properties of Complex Rare‐Earth Zirconate Ceramic for Thermal Barrier Coatings. Journal of the American Ceramic Society.DOI
  314. Wang Fu-chi (2008). Influence of Y_2O_3 on the mechanical properties and fracture process of 93W-4.9Ni-2.1Fe alloy. Ordnance Material Science and Engineering.
  315. Wang Fu-chi (2008). Effect of ZrO_2 on Growth Mechanism of ZrB_2 in ZrB_2-SiC Composites. Acta Armamentarii.
  316. Wang Fu-chi (2008). Development of Investigation on Intergranular Glass Films in High Temperature Ceramics and Composites. Cailiao daobao.
  317. Wang Fu-chi (2008). Three-Dimensional Simulation of Plasma Jet and Particle Groups in Plasma Spraying. 《北京理工大学学报:英文版》.
  318. 孙坤,赵双赞,程兴旺,王富耻(2007). 应变率及TC6钛合金的不同组织对其动态力学性能的影响. 《2007年全国博士生学术论坛(材料科学与工程学科)论文集》.
  319. 张朝晖,苗凯,王玮洁,王富耻(2007). 稀土含量对高密度钨合金性能的影响. 《稀有金属材料与工程》.
  320. 解峰,李云凯,李树奎,王富耻(2007). Al,Si,Sn,Zn合金元素对W-Ni-Mn烧结致密的影响. 《稀有金属材料与工程》.
  321. 谭成文,孙红婵,于晓东,李树奎,王富耻,才鸿年(2007). 冲击加载条件下化学气相沉积高纯钨的塑性变形机制. 《稀有金属材料与工程》.
  322. 王琳,王富耻,张朝晖,廖秋尽(2007). SPS法制备微米烧结铜及其微观组织演变规律. 《稀有金属材料与工程》.
  323. 程兴旺,王富耻,李树奎,王鲁(2007). 不同头部形状长杆弹侵彻过程的数值模拟. 《兵工学报》.
  324. 王扬卫,王富耻,于晓东,马壮(2007). 梯度陶瓷金属装甲复合材料研究进展. 《兵工学报》.
  325. 李玉秋,李云凯,李树奎,王富耻(2007). Ni-Mn合金制备工艺与显微组织的研究. 《稀有金属材料与工程》.
  326. 朱时珍,徐强,冯超,赵俊峰,曹建岭,王富耻(2007). ZrB2-20%SiC超高温陶瓷抗热震性能研究. 《稀有金属材料与工程》.
  327. 谭成文,杨素媛,陈志永,王富耻,才鸿年(2007). 镁合金表面电弧喷涂纯铝的界面特性研究. 《材料热处理学报》.DOI
  328. 李东荣,王富耻,马壮,王全胜,柳彦博,周芳集(2007). TiO2涂层激光热冲击损伤机理研究. 《稀有金属材料与工程》.
  329. 李淑华,王富耻,谭成文,陈志永,孙智(2007). 预变形TA2剪切带中微观组织的演变. 《稀有金属材料与工程》.
  330. 王扬卫,于晓东,王富耻,马壮,康晓鹏(2007). 无压浸渗制备Si3N4/Al复合材料的反应浸渗机理. 《稀有金属材料与工程》.
  331. 曹建岭,徐强,朱时珍,王富耻,赵俊峰,倪川浩,冯超(2007). 烧结温度对ZrB2-SiC超高温陶瓷致密化的影响. 《稀有金属材料与工程》.
  332. 王全胜,王富耻,柳彦博,李轶昳,马壮(2007). 等离子喷涂纳米Al2O3-13%TiO2涂层组织与性能. 《稀有金属材料与工程》.
  333. 张红松,王富耻,徐强,刘玲(2007). 用X-射线衍法研究Sm2Zr2O7形成机制. 《稀有金属材料与工程》.
  334. 王扬卫,于晓东,王富耻,马壮,王璀轶(2007). 界面反应对铝熔体与Si3N4多孔陶瓷界面的润湿作用. 《稀有金属材料与工程》.
  335. 徐强,朱时珍,倪川浩,曹建岭,赵俊峰,冯超,王富耻(2007). SiC陶瓷的SPS烧结机理研究. 《稀有金属材料与工程》.
  336. 李淑华,王富耻,张红松(2007). AZ91D镁合金微等离子体氧化陶瓷层的耐腐蚀性研究. 《稀有金属材料与工程》.
  337. 张慧玲,范群波,王富耻,张锋,张红松(2007). 稀土锆酸盐焦绿石相结构的第一原理计算. 《稀有金属材料与工程》.
  338. 范群波,马壮,王富耻,王鲁(2007). 功能梯度热障涂层隔热与应力缓和的组合设计. 《稀有金属材料与工程》.
  339. 徐强,王富耻,朱时珍,张红松,刘玲,万春磊,瞿志学,潘伟(2007). 空位对Sm2Zr2O7陶瓷热膨胀系数的影响. 《稀有金属材料与工程》.
  340. 刘玲,徐强,王富耻,张红松(2007). (Gd0.4Sm0.5Yb0.1)2Zr2O7陶瓷的合成与导热性能研究. 《稀有金属材料与工程》.
  341. 朱时珍,付云雷,徐强,方总涛,王富耻(2007). SiC粒径对ZrB 2 -SiC复合材料抗氧化性能的影响. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
  342. 王迎春,姚志涛,程兴旺,吴复尧,王富耻(2007). Y2O3对钨合金微观组织与性能的影响. 《北京理工大学学报》.
  343. 范群波,王鲁,王富耻(2007). 等离子喷涂过程中喷枪出口处基本参量的预测方法. 《北京理工大学学报》.
  344. 熊兰天,金海波,曹茂盛,王富耻,李仲平(2007). 烧蚀条件下SiO2/SiO2复合材料中防潮剂的演变行为研究. 《材料工程》.
  345. 谭成文,郭冠伟,王潇屹,王富耻,才鸿年(2007). AZ31镁合金表面液相渗铝的工艺与性能. 《中国有色金属学报》.
  346. 孙智,苏铁健,李淑华,王富耻(2007). 高应变率下工业纯钛TA2变形与失效研究. 《兵器材料科学与工程》.
  347. 李丹,王鲁,王富耻,张海峰(2007). 钨丝/锆基非晶合金中钨丝微观动态变形特征. 《兵器材料科学与工程》.
  348. 简中华,马壮,王富耻,曹素红(2007). 热喷涂铜基W涂层工艺性能研究. 《兵器材料科学与工程》.
  349. 李淑华,王富耻,谭成文,张红松,陈志永(2007). 锻态电磁纯铁的剪切带和微观组织分析. 《兵器材料科学与工程》.
  350. 张红松,王富耻,马壮,王全胜,冼文锋,成志芳(2007). 等离子喷涂ZrO2热障涂层的热冲击性能. 《机械工程材料》.
  351. 谭成文,李珊珊,周终强,郑秀华,王富耻,才鸿年(2007). 镁/铝层状复合材料的扩散连接制备及界面特性. 《特种铸造及有色合金》.
  352. 于晓东,王扬卫,王富耻,张弛,纪涛(2007). 颗粒尺寸对SiCp/2024Al复合材料性能的影响. 《特种铸造及有色合金》.
  353. 李珊珊,郑秀华,谭成文,张磊,王富耻,才鸿年(2007). Al/Mg层状复合材料动态压缩行为及影响因素. 《特种铸造及有色合金》.
  354. A.L. Fan, Shukui Li, Wenhuai Tian, Fuchi Wang (2007). Comparison of microstructures in electroformed and spin-formed copper liners of shaped charge undergone high-strain-rate deformation. Transactions of Nonferrous Metals Society of China.DOI
  355. Qunbo Fan, Lu Wang, Fuchi Wang (2007). Numerical simulation of temperature and velocity fields in plasma spray. Journal of Central South University of Technology.DOI
  356. Zhao-Hui Zhang, Fuchi Wang, Lin Wang, Shukui Li (2007). Ultrafine-grained copper prepared by spark plasma sintering process. Materials Science and Engineering A.DOI
  357. Zhiyong Chen, Hongnian Cai, Saiyi Li, Xinming Zhang, Fuchi Wang, Chengwen Tan (2007). Analysis of crystallographic twinning and slip in fcc crystals under plane strain compression. Materials Science and Engineering A.DOI
  358. Qunbo Fan, Lu Wang, Fuchi Wang, Quansheng Wang (2007). Modeling of composite coatings in plasma spraying. Surface and Coatings Technology.DOI
  359. Chengwen Tan, Shanna Xu, Lu Wang, Zhiyong Chen, Fuchi Wang, Hongnian Cai (2007). Effect of temperature on mechanical behavior of AZ31 magnesium alloy. Transactions of Nonferrous Metals Society of China.DOI
  360. Fan Qunbo, Wang Fu-chi, Lu Wang (2007). Study of Flying Particles in Plasma Spraying. Journal of Materials Engineering and Performance.DOI
  361. Li Xiang, Zhai Fei-Fei, Ying Liu, Cao Mao-Sheng, Wang Fu-chi, Zhang Xi-Xiang (2007). Synthesis and photoluminescence study on ZnO nano-particles. Chinese Physics.DOI
  362. Fan Qunbo, Lu Wang, Wang Fu-chi (2007). Modeling influence of basic operation parameters on plasma jet. Journal of Materials Processing Technology.DOI
  363. 于晓东,王扬卫,王富耻 (2007). Effect of particle size on mechanical properties of SiCp/5210 Al metal matrix composite. Transactions of Nonferrous Metals Society of China.
  364. Wang Fu-chi (2007). Study on deformation and failure of TA2 under compressive load at high strain rate. Ordnance Material Science and Engineering.
  365. Wang Fu-chi (2007). Numerical calculations of adiabatic shearing localization of steel projectile impacting concrete. Baozha yu chongji.
  366. Wang Fu-chi (2007). Effects of Y_2O_3 on the Microstructure and Mechanical Properties of Tungsten Alloys. Transactions of Beijing Institute of Technology.
  367. Wang Fu-chi (2007). Prediction Methods of Basic Parameters at the Nozzle Exit in Plasma Spraying. Transactions of Beijing Institute of Technology.
  368. 王富耻,才鸿年 谭成文 王富耻 陈志勇(2006). 装甲用镁合金抗弹性能表征体系探讨. 《中国工程科学》, Vol. 8, No. 2.下载原文
  369. 张朝晖,苗凯,王富耻(2006). 稀土元素La,Ce对93WNiFe合金力学性能的影响. 《北京理工大学学报》.
  370. 王琳,王富耻,张朝晖,廖秋尽(2006). SPS法制备高密度烧结铜的工艺研究. 《稀有金属》.
  371. 曾家庆,王迎春,李树奎,王富耻(2006). 爆炸加载下钨合金破片分布的试验研究. 《兵器材料科学与工程》.
  372. 刘娜,才鸿年,王鲁,兰山,王富耻,张海峰(2006). 三维连通网状SiC陶瓷/Zr基非晶复合材料单轴压缩性能研究. 《哈尔滨工业大学学报》.
  373. 杨艳波,王富耻,马壮(2006). 碳/碳复合材料抗烧蚀涂层工艺与性能研究. 《新技术新工艺》.
  374. 刘娜,才鸿年,王鲁,邵长星,张海峰,王富耻,兰山(2006). Zr基非晶合金准静态压缩下的多重剪切带行为. 《北京理工大学学报》.
  375. 王琳,王富耻,张朝晖,廖秋尽(2006). 烧结压力对铜粉放电等离子烧结的影响规律. 《北京理工大学学报》.
  376. 马壮,曹素红,王富耻,柳彦博,肖雄(2006). 基体表面粗糙度对HVOF喷涂WC-Co粒子变形的影响. 《北京理工大学学报》.
  377. 马壮,曹素红,王富耻,王全胜(2006). 不锈钢基体温度对NiCrCoAlY和ZrO2涂层颗粒变形的影响. 《复合材料学报》.
  378. 王扬卫,王富耻,于晓东,李俊涛(2006). 无压浸渗制备Si3N4/Al复合材料的界面反应研究. 《航空材料学报》.
  379. 程兴旺,王富耻,李树奎,袁慎坡(2006). 新型自锐化钨合金材料研究. 《稀有金属材料与工程》.
  380. 王迎春,王富耻,李树奎(2006). 钨含量对钨合金动态剪切性能的影响. 《稀有金属材料与工程》.
  381. 张朝晖,廖秋尽,程荆卫,王富耻(2006). 双金属复合材料固相结合数值仿真研究. 《材料工程》.
  382. 王迎春,梁锦辉,李树奎,王富耻(2006). 钨合金性能对爆炸加载下断裂模式的影响. 《兵工学报》.
  383. 宋顺成,李国斌,才鸿年,王富耻(2006). 战斗部对混凝土先侵彻后爆轰的数值模拟. 《兵工学报》.
  384. 王琳,王富耻,张朝晖,廖秋尽(2006). 微米级铜粉的SPS烧结工艺研究. 《2006年全国功能材料学术年会专辑》.
  385. 曹茂盛,张亮,李金刚,侯志灵,王富耻(2006). 硅树脂/二氧化硅高温相变及介电性能研究. 《材料科学与工艺》.
  386. Zhiyong Chen, Hongnian Cai, Xinming Zhang, Fuchi Wang, Chengwen Tan (2006). Analysis for twinning and slip in face-centered cubic crystals under axisymmetric co-deformation. Science China Technological Sciences.DOI
  387. Zhao-Hui Zhang, Fuchi Wang, Shukui Li, Lu Wang (2006). Deformation characteristics of the 93W–4.9Ni–2.1Fe tungsten heavy alloy deformed by hydrostatic extrusion. Materials Science and Engineering A.DOI
  388. Yajie Xu, Chuanbao Cao, Zhuo Chen, Jie Li, Fuchi Wang, Hongnian Cai (2006). Preparation of Novel Saw-Toothed and Riblike α-Si3N4 Whiskers. The Journal of Physical Chemistry B.DOI
  389. Wang Fu-chi (2006). Study on high-temperature transformation and dielectric properties of silicon resin/silicon dioxide composite. Materials Science and Technology.
  390. Wang Fu-chi (2006). Fragment distribution of tungsten alloy under explosive loading. Ordnance Material Science and Engineering.
  391. Wang Fu-chi (2006). Influence of Rare Earth Elements La and Ce on the Mechanical Properties of Alloy 93WNiFe. Transactions of Beijing Institute of Technology.
  392. Wang Fu-chi (2006). Numerical Simulation to the Process of Solid Phase Bonding for Cu/Al Bimetal Composite by Hydrostatic Extrusion. Cailiao gongcheng.
  393. Wang Fu-chi (2006). The Effect of Tungsten Heavy Alloy Properties on Fracture Mode Under Explosive Loading. Acta Armamentarii.
  394. 王扬卫,王富耻,于晓东,陈海东(2005). 一种新型氮化铝基复合材料的弹击损伤特征研究. 《兵工学报》.
  395. 张朝晖,李能新,王富耻,李树奎,程荆卫(2005). 钨基高密度合金的静液挤压形变强化研究. 《稀有金属材料与工程》.
  396. 张朝晖,苗凯,王富耻(2005). 钨合金力学性能的温度响应. 《北京理工大学学报》.
  397. 张朝晖,王富耻,周新平,张恒(2005). 纤维增强树脂基复合材料点接触弹流润滑研究. 《北京理工大学学报》.
  398. 苏铁健,王富耻,李树奎,王鲁(2005). 合金钢的热导率计算. 《北京理工大学学报》.
  399. 张朝晖,王扬卫,王富耻(2005). 静液挤压93W合金变形与断裂研究. 《稀有金属材料与工程》.
  400. 范群波,王鲁,王富耻(2005). 等离子喷涂过程中飞行颗粒熔化状态的数值仿真. 《兵工学报》.
  401. 苏铁健,王超,李树奎,王富耻(2005). 钢的强导比与绝热剪切敏感性关系的研究. 《兵器材料科学与工程》.
  402. 刘美芬,张朝晖,李树奎,王富耻(2005). 压缩变形对钨渗铜合金微观组织及性能的影响. 《兵器材料科学与工程》.
  403. 陈海东,王扬卫,王富耻,于晓东(2005). 无压浸渗制备Si3N4/Al复合材料的工艺与抗弹性能研究. 《兵器材料科学与工程》.
  404. 黄小婷,王富耻,马壮,王全胜(2005). 碳纤维增强聚酰亚胺复合材料表面梯度涂层制备与组织性能研究. 《材料工程》.
  405. Wang Fu-chi (2005). Mechanical Properties of 90 Tungsten Alloy at Different Temperatures. Journal of Beijing Institute of Technology.
  406. Wang Fu-chi (2005). Simulation of Melted State of Particles in Plasma Spray. Acta Armamentarii.
  407. 王迎春,王富耻,李树奎(2004). 93W和98W钨合金静爆条件下的破碎特性. 《兵工学报》.
  408. 程兴旺,王富耻,李树奎,王鲁(2004). 钨合金空心弹体垂直侵彻过程研究. 《第九届材料科学与合金加工学术会议专刊论文集》.
  409. 王富耻,王琳,李树奎,王鲁(2004). 空心侵彻弹侵彻金属靶板的细观损伤行为研究. 《兵工学报》.
  410. 谭成文,王富耻,李树奎,苏铁建(2004). 绝热剪切带内微孔洞演化规律研究. 《兵工学报》.
  411. 王扬卫,王富耻,李俊涛,于晓东(2004). 无压浸渗制备梯度Si 3 N 4 /Al复合材料. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
  412. 程兴旺,王富耻,王鲁,李树奎(2004). 钨合金壳体侵彻混凝土靶板过程壳体应变的实验测试. 《兵工学报》.
  413. 于晓东,王扬卫,李轶轶,李璐华,王富耻(2004). 挤压铸造Al 2 O 3 /Al金属基复合材料界面反应与性能研究. 《中国科协第五届青年学术年会》.
  414. 王扬卫,王富耻,于晓东(2004). 无压浸渗制备Si 3 N 4 /Al复合材料的动态性能研究. 《科技、工程与经济社会协调发展——中国科协第五届青年学术年会论文集》.
  415. 刘新芹,王富耻,王琳,路永胜(2004). 钢中绝热剪切带的动态损伤演化. 《兵器材料科学与工程》.
  416. 张彤,孟庆元,王富耻(2004). 层合结构压电器件的机电耦合效应. 《应用力学学报》.
  417. 苏铁健,李晓蔓,李树奎,王富耻,张朝晖(2004). 微量元素和回火工艺对1.25Cr-0.5Mo钢抗氢蚀能力的影响. 《金属热处理》.
  418. 苏铁健,谭成文,李树奎,王富耻(2004). 三种压力容器用钢的抗氢蚀能力及其服役寿命估算. 《机械工程材料》.
  419. 谭成文,王富耻,刘远宏,苏铁健,李树奎(2004). 材料绝热剪切敏感性表征及测试方法研究. 《北京理工大学学报》.
  420. 孙明,王鲁,程焕武,姚佳浩,王富耻,李树奎,张海峰,王宏民(2004). 退火工艺对钨丝/锆基非晶合金复合材料动态力学性能及断裂模式的影响. 《兵器材料科学与工程》.
  421. 苏铁健,王富耻,李树奎,王鲁(2004). 钢的热导率与化学成分和温度的关系. 《兵器材料科学与工程》.
  422. Zhiyong Chen, Xinming Zhang, Chuming Liu, Hongnian Cai, Fuchi Wang (2004). Computer Simulation of Rolling Textures Evolution of Pure Aluminum with Initial Texture. MATERIALS TRANSACTIONS.DOI
  423. Fan Qunbo, Lu Wang, Wang Fu-chi (2004). 3D simulation of the plasma jet in thermal plasma spraying. Journal of Materials Processing Technology.DOI
  424. Lu Wang, Fan Qunbo, Wang Fu-chi, Wang Quansheng (2004). Numerical Simulation of Plasma-Sprayed Functionally Graded Coatings. Thermal spray.DOI
  425. Wang Fu-chi, Fan Qunbo, Lu Wang, Wang Quansheng (2004). Numerical Simulation of a Multi-Component Reacting Plasma Jet in Plasma Spraying. Thermal spray.DOI
  426. Wang Fu-chi (2004). Hydrogen-attack Resistance of Several Steels for Pressure Vessels and Estimation of Their Service Life. Materials for Mechanical Engineering.
  427. 范群波,王鲁,王富耻(2003). 等离子喷涂金属/陶瓷颗粒的瞬态碰撞压力研究. 《北京理工大学学报》.
  428. 范群波,王鲁,王富耻(2003). 等离子喷涂过程中金属与陶瓷颗粒倾斜入射的数值模拟. 《材料科学与工程学报》.
  429. 王鲁,王富耻,程焕武,李树奎,才鸿年,胡壮麒,张海峰(2003). 钨丝/锆基非晶合金复合材料的动态力学特性. 《北京理工大学学报》.
  430. 成志芳,吕广庶,王富耻,马壮,沈金文(2003). 功能梯度热障涂层热震裂纹的形成和扩展. 《北京理工大学学报》.
  431. 苏铁健,李树奎,王富耻(2003). 热处理对0.14C-1.25Cr-0.5Mo钢的抗氢蚀能力的影响. 《特殊钢》.
  432. 张朝晖,王富耻,李树奎(2003). 钨丝集束复合材料穿甲弹芯穿甲过程的数值模拟研究. 《稀有金属材料与工程》.
  433. 谭成文,王富耻,李树奎,王鲁(2003). 内爆炸加载条件下圆筒的膨胀、破裂规律研究. 《爆炸与冲击》.
  434. 王琳,王富耻,王鲁,才鸿年,李树奎(2003). 贝氏体钢和35CrMnSi空心弹体侵彻金属靶板的比较研究. 《兵工学报》.
  435. 谭成文,王富耻,李树奎(2003). 绝热剪切变形局部化研究进展及发展趋势. 《兵器材料科学与工程》.
  436. 王迎春,李树奎,王富耻(2003). 爆炸加载条件下高密度钨合金破碎性的实验研究. 《兵器材料科学与工程》.
  437. 程兴旺,王富耻,王鲁,李树奎(2002). 垂直侵彻钢靶过程中钨合金壳体破坏机理研究. 《稀有金属材料与工程》.
  438. 王琳,王富耻,王鲁,李树奎(2002). 空心弹体垂直侵彻混凝土靶板的应变测试研究. 《北京理工大学学报》.
  439. 李树奎,王富耻,郭启雯,刘三江(2002). 钨合金圆筒爆破试验破片分布的统计分析. 《兵器材料科学与工程》.
  440. 李树奎,杨卓越,王富耻,才鸿年(2002). 爆破圆管管壁内分界面形成规律初探. 《兵器材料科学与工程》.
  441. 范群波,王鲁,王富耻(2002). 等离子喷涂熔融颗粒撞击基体过程的数值模拟. 《机械工程材料》.
  442. 张朝晖,王富耻,李树奎(2002). 钨合金的静液挤压变形强化. 《兵工学报》.
  443. 王琳,王富耻,王鲁,才鸿年(2001). 空心弹体侵彻金属靶板的数值模拟和实验研究. 《兵器材料科学与工程》.
  444. 王富耻,张朝晖,李树奎(2001). 不同型线凹模钨合金静液挤压过程数值仿真研究. 《兵工学报》.
  445. 王鲁,王富耻,范群波,刘国权(2001). 金属/陶瓷颗粒与接触面的热相互作用数值仿真研究. 《兵工学报》.
  446. 杨卓越,王富耻,王鲁,李树奎(2001). 钢管爆炸条件下绝热剪切带的作用和精细结构. 《北京理工大学学报》.
  447. 李树奎,张朝晖,王富耻,陈倩(2001). 易碎型钨合金动态拉伸强度测试方法研究. 《北京理工大学学报》.
  448. 张朝晖,王富耻,李树奎(2001). 静液挤压钨合金的显微组织与力学性能. 《中国有色金属学报》.
  449. 杨卓越,王富耻,李树奎,王鲁(2001). 爆炸加载条件下工业纯铁的冶金效应. 《材料科学与工艺》.
  450. 杨卓越,杨道明,王富耻(2001). 内部爆炸加载条件下钢管变形与破碎研究. 《材料科学与工艺》.
  451. Zhang Zhaohui, Wang Fu-chi (2001). Research on the deformation strengthening mechanism of a tungsten heavy alloy by hydrostatic extrusion. International Journal of Refractory Metals and Hard Materials.DOI
  452. Wang Fu-chi (2001). Deformation and fragmentation of explosively loaded steel tubes. Materials Science and Technology.
  453. 王富耻,王鲁,吕广庶(2000). 金属陶瓷功能梯度材料的颗粒界面断裂能量释放率与临界颗粒尺寸的研究. 《复合材料学报》.
  454. 李雪利,王鲁,王富耻,刘国权(2000). ZrO 2 -NiCrAl系功能梯度材料分维数与力学性能的关系. 《第一届国际机械工程学术会议》.
  455. 王富耻,王鲁,吕广庶(2000). 金属陶瓷功能梯度热障涂层瞬态热负荷下的破坏分析. 《兵工学报》.
  456. 张朝晖,王富耻,李树奎,程兴旺(2000). 高比重钨合金的静液挤压强化. 《兵器材料科学与工程》.
  457. 张朝晖,王富耻,李树奎(2000). 静液挤压过程中的润滑研究. 《北京理工大学学报》.
  458. 张朝晖,王富耻,李树奎(2000). 钨合金静液挤压过程应力应变场数值模拟. 《北京理工大学学报》.
  459. 王鲁,吕广庶,王富耻,范天佑(1999). 功能梯度热障涂层热负荷下的有限元分析. 《兵工学报》.
  460. 王全胜,王富耻(1999). 等离子喷涂层的力学性能研究. 《宇航材料工艺》.
  461. 王迎春,王富耻,黄国华,李树奎(1998). W-Ni-Cu合金的气孔率对动态力学性能的影响. 《兵器材料科学与工程》.
  462. 王富耻,王迎春,黄国华,李树奎(1998). 碳含量对W-Ni-Fe系合金析出相及动态力学性能的影响. 《粉末冶金技术》.
  463. 李强,雷廷权,王富耻,欧阳家虎,杨德庄,周玉(1998). 激光熔覆TiC颗粒增强Ni-Cr-B-Si-C合金复合涂层的微观组织. 《中国有色金属学报》.
  464. 李强,王富耻,雷廷权,陈彦斌,欧阳家虎,杨德庄(1998). 激光熔覆Ni-Cr-B-Si-C合金的组织及其摩擦磨损特性. 《中国有色金属学报》.
  465. 杨卓越,王富耻,李树奎(1998). 静拉伸载荷下93W合金缺口效应和断裂特征研究. 《兵器材料科学与工程》.
  466. 王鲁,吕广庶,王富耻,张丽华,范天佑(1998). 功能梯度材料的基体与颗粒界面热应力研究. 《北京理工大学学报》.
  467. 吴兵,王富耻(1992). 铝锂合金超塑性研究发展概况. 《兵器材料科学与工程》.
  468. 王富耻,张吉人(1987). 5CrMnMo钢超塑性变形后的电镜分析. 《兵器材料科学与工程》.
  469. 王富耻,张吉人(1986). 5CrMnMo钢超塑性变形特性的研究. 《材料科学与工艺》.

此主页由公开资料整理,尚未经学者本人认领。