百晓学者学者目录

张立军

同济大学

精选作品

期刊论文

2026

某轻型商用车同轴电驱动桥低阶次噪声研究

徐小翔，曾小春，张立军，王毅，曹进选，颜盟，李克成

《汽车工艺师》

DOI

2026

DrivAer模型底部区域流动及表面气动声学特性研究

贺银芝，陈亦乐，张永锋，张立军，杨志刚

《同济大学学报(自然科学版)》

2026

High-frequency estimation of tri-axial tire forces for intelligent tires using fused time and frequency domain data

Yujie Zhao, Dejian Meng, Lijun Zhang, Haoxiang Yang, 毕欣

Measurement

DOI

2026

A novel triaxial tire forces estimation method for intelligent tires using multilayer perceptron

Dejian Meng, Haoxiang Yang, Birui Li, Lijun Zhang

Measurement

DOI

2026

Uncertainty propagation and its mechanism of friction-induced brake squeal based on perturbation method

Dejian Meng, Jiaming Liang, Wenbo Li, Lijun Zhang, Birui Li

Journal of Vibration and Control

DOI

2026

Hybrid reinforcement learning-model predictive control framework for full-band (0–500 Hz) vibro-acoustic optimization in active suspension systems

Zhehui Zhu, Dejian Meng, Ye Han, Siqi Chen, Lijun Zhang

Expert Systems with Applications

DOI

2025

高速工况下汽车侧窗脉动压力激励特性

姜祖啸，张立军，邢鹏

《同济大学学报(自然科学版)》

2025

Nonlinear dynamic modeling and analysis of steering brake squeal considering the deflection effect of friction pairs

Dejian Meng, CHENGXUE GUAN, Wenbo Li, Jiaming Liang, Lijun Zhang

Nonlinear Dynamics

DOI

2025

Jet noise reduction and mechanism analysis for rearview mirrors and A-pillars

Qiliang Li, Z.D. An, Yu Yang Shao, Jiabin Pang, Lijun Zhang, Qingyang Wang

Physics of Fluids

DOI

2025

Aerodynamic noise optimization at the front side window area of DrivAer model based on firefly algorithm

Yinzhi He, Yiwei Zhang, Wuzhou Yu, Zaixiu Jiang, Lijun Zhang, Reinhard Blumrich, Jochen Wiedemann

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2025

Modelling and analysis for friction induced steering brake squeal considering three-dimensional nonlinear contact characteristics

Dejian Meng, Jiaming Liang, Wenbo Li, Lijun Zhang, Birui Li

Mechanical Systems and Signal Processing

DOI

2025

Correlated Beamforming Based on Deconvolution Methods for Identified Vehicle Exterior Wind Noise Sources and Interior Noise

Yinzhi He, Henghao Shen, Yu Ching Wu, Lijun Zhang, Zhigang Yang, Reinhard Blumrich, Jochen Wiedemann

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2025

Evaluation of vibration comfort for vehicle seats with extensive backrest angles based on road tests

Jianfeng Wu, Lijun Zhang, Dejian Meng, Yan Tang, Wenbo Li, Kaikun Pei

Journal of Mechanical Science and Technology

DOI

2025

Simulation analysis of the dynamics characteristics of battery electric vehicle transmission system under impact condition

Lijun Zhang, Zituo Wang, Dejian Meng, Birui Li

Journal of Vibration and Control

DOI

2024

A novel approach to analyzing thermoelastic behavior of brake disc under the combined action of thermal and mechanical loads

Dejian Meng, Xiangxin Zeng, Lijun Zhang, Birui Li

Mechanical Systems and Signal Processing

DOI

2024

Active Control of Road Impulse Noise Based on Modified Error-constrained FNxLMS

Lijun Zhang, Zifei Wang, Dejian Meng, Xiongfei Pi

International Conference on Information Communication and Signal Processing (ICICSP)

DOI

2024

Wavelet Packet Energy Proportion-Based Early Warning for the Failure of Lithium-Ion Batteries

Zhehui Zhu, Lijun Zhang, Hang Wu, Siqi Chen, Xuezhe Wei, Haifeng Dai

IEEE Transactions on Transportation Electrification

DOI

2024

A prediction method for convective heat transfer coefficients of brake discs based on small samples combined wind tunnel tests and CFD simulations

Lijun Zhang, Lingqiu Jia, Dejian Meng, Jiaming Liang

International Conference on Mechanical, Electronics and Electrical and Automation Control (METMS)

DOI

2024

Analysis of Vibration Characteristics of High-Speed Reducer for Pure Electric Vehicles

Lijun Zhang, Yujie Wang, Dejian Meng, Wenbo Li

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2023

Matching and Optimization Design of Electric Drive Assembly Mounting System of Electric Vehicle

Lijun Zhang, Yifan Wang, Dejian Meng, Dengcheng Liu, Xiao Ming Zhou

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2023

An investigation of initial topography on thermoelastic behavior of brake disc under thermal load

Hu Ling, Dejian Meng, Lijun Zhang, Birui Li

Mechanical Systems and Signal Processing

DOI

2023

Ride Comfort Analysis of Seated Occupants Based on an Integrated Vehicle-Human Dynamic Model

Jianfeng Wu, Lijun Zhang, Dejian Meng

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2023

A Novel Speed Control Strategy for Electric Vehicles with Optimal Energy Consumption under Multiple Constraints

Lijun Zhang, Xianhua Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2022

A hybrid feedforward/feedback multi-channel active control system with optimization for cancelling road noise inside a vehicle cabin

Shuai Zhang, Lijun Zhang, Dejian Meng, Xiyu Zhang

Applied Acoustics

DOI

2022

Modeling and Evaluation of SiC Inverters for EV Applications

Hui Su, Lijun Zhang, Dejian Meng, Yisu Li, Han Na, Yuxin Xia

Energies

DOI

2022

A study of the influence of heterogeneous friction coefficient and heterogeneous contact stiffness on the generation of squeal

Wenbo Li, Lijun Zhang, Cunman Zhang, Dejian Meng, Pengfei He

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2022

Time-varying characteristics of friction squeal and the influence of heterogeneous friction and contact characteristics based on transient simulation

Wenbo Li, Lijun Zhang, Cunman Zhang, Dejian Meng, Pengfei He

Applied Acoustics

DOI

2022

Nonlinear overall annoyance level modeling and interior sound quality prediction for pure electric vehicle with extreme gradient boosting algorithm

Yanqin Wang, Shuai Zhang, Dejian Meng, Lijun Zhang

Applied Acoustics

DOI

2022

Analysis and active control of torsional vibration in range extender with internal combustion engine

Dejian Meng, Hanyang Liu, Lijun Zhang, Jie Xu

Journal of Vibration and Control

DOI

2022

Parameter Analysis and Optimization of Road Noise Active Control System

Xiongfei Pi, Dejian Meng, Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2022

A Hybrid Model for Predicting Steering Brake Squeal Based on Multibody Dynamics and Finite Element Methods

Lijun Zhang, Yongchao Dong, Dejian Meng, Wenbo Li

Shock and Vibration

DOI

2022

A dual sampling-rate active noise equalization algorithm for active sound quality control of vehicle interior noise

Shuai Zhang, Lijun Zhang, Dejian Meng

Proceedings of meetings on acoustics

DOI

2021

Investigation on Brake Disc Deformation Under Asymmetric Mechanical Loads

Dejian Meng, Yongsheng Tong, Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2021

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

Cheng Cao, Dejian Meng, Ye Zhao, Yuan Shu, Menghao Zhang, Lijun Zhang

Journal of Physics Conference Series

DOI

2021

A Method for Quantifying Automobile Brake Creep Groan Intensity Based on Friction‐Induced Vibration and Noise

Lijun Zhang, Jianfeng Wu, Dejian Meng

Shock and Vibration

DOI

2020

Active and Passive Control of Torsional Vibration in Vehicle Hybrid Powertrain System

Lijun Zhang, Shijuan Zhang, Dejian Meng, Jie Xu

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2019

面向车内噪声控制的次级通路建模与验证

张希玉，张立军，孟德建

《汽车工程》

DOI

2019

Transient Dynamic Analysis of Vehicle Brake Creep Groan

Dejian Meng, Liangliang Shen, Lijun Zhang, Gang S. Chen

Journal of Vibration Engineering & Technologies

DOI

2019

Performance Testing and Analysis of Multi-Channel Active Control System for Vehicle Interior Noise Using Adaptive Notch Filter

Lijun Zhang, Xiyu Zhang, Dejian Meng

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2019

Sensing and Quantifying a New Mechanism for Vehicle Brake Creep Groan

Dejian Meng, Lijun Zhang, Xiaotian Xu, Yousef Sardahi, Gang S. Chen

Shock and Vibration

DOI

2018

基于声能量传递分析的空腔阻隔结构布置方案设计

牛胜福，张立军，赵英龙，孟德建，曹诚，陈阳，马扎根，余卓平

《振动与冲击》

2018

基于有限元法的汽车盘式制动器蠕动颤振建模与分析

张立军，徐杰，孟德建，余卓平

《汽车工程》

2018

底盘角系统制动颤振多体动力学建模与分析

张立军，闫国明，孟德建，余卓平

《同济大学学报(自然科学版)》

2018

典型工况与工作模式下混联式混合传动系统振动分析

孟德建，陈文龙，张立军，余卓平

《同济大学学报(自然科学版)》

2018

Robust Design of Active Vehicle Interior Noise Control System Based on Adaptive Notch Filter

Yinglong Zhao, Lijun Zhang, Dejian Meng, Pinjie Zhang

Lecture notes in electrical engineering

DOI

2018

A Study on the Relationship Among Several Friction-Induced Instability Mechanisms Based on Multi-point Contact Nonlinear Dynamical Friction-Induced Vibration Model

Lijun Zhang, Zhuang Zhang, Dejian Meng

Lecture notes in electrical engineering

DOI

2018

Capacity Allocation of Driving System and Braking System for Distributed Drive Electric Vehicle

Dejian Meng, Zhuoyu Li, Lijun Zhang

Lecture notes in electrical engineering

DOI

2018

Study on Brake Disc Dynamics under Asymmetric Thermal Loads

Dejian Meng, Jialin Liu, Jingyi Zhang, Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2018

Fast Prediction of Disc Brake Squeal Uncertainty Based on Perturbation Concept

Wenbo Li, Lijun Zhang, Dejian Meng

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2018

Influence of Heterogeneous Contact Stiffness and Heterogeneous Friction Coefficient on Frictional Squeal

Lijun Zhang, Wenbo Li, Dejian Meng

Shock and Vibration

DOI

2018

Experimental Study on Transient Characteristics and Key Factors of Vehicle Brake Groan

Lijun Zhang

Journal of Mechanical Engineering

DOI

2017

基于道路试验的制动器蠕动颤振客观测量与主观评价

张立军，黄健，孟德建，张频捷

《振动与冲击》

2017

分布式驱动电动汽车驱制动系统容量分配方法

张立军，李濯宇，孟德建

《汽车工程学报》

2017

Influences of Initial DTV on Thermomechnical Coupling in Disc Brake System

Dejian Meng, Ziyi Wang, Lijun Zhang, Zhuoping Yu

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2017

Transient Analysis of a Flexible Pin-on-Disk System and Its Application to the Research Into Time-Varying Squeal

Lijun Zhang, Jun Jie Wu, Dejian Meng

Journal of vibration and acoustics

DOI

2017

Analysis of Friction-Induced Vibration Leading to Brake Squeal Using a Three Degree-of-Freedom Model

Hongming Lyu, Stephen James Walsh, Guangxiong Chen, Lijun Zhang, Kuncai Qian, Lei Wang

Tribology Letters

DOI

2017

A Transient Dynamic Model of Brake Corner and Subsystems for Brake Creep Groan Analysis

Dejian Meng, Lijun Zhang, Jie Xu, Zhuoping Yu

Shock and Vibration

DOI

2016

通风盘制动器盘-块接触位置变化对尖叫复模态分析的影响

张立军，孟德建，孙俊刚

《汽车工程》

2016

车身侧围空腔阻隔结构隔声性能的建模与验证

牛胜福，张立军，孟德建，何臻，曹诚，徐雪莹，陈阳

《汽车工程》

2016

车身侧围空腔阻隔结构对低频结构噪声影响的仿真分析

张立军，宋然，孟德建

《汽车技术》

2016

汽车盘式制动器蠕动颤振试验与理论分析

张立军，张频捷，孟德建

《汽车工程》

2016

Brake Judder Analysis Based on the Rigid-Flexible Coupling Model of Brake Corner

Mingzhuo Li, Dejian Meng, Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2016

Influences of Pad Backplate on Thermo-Mechnical Coupling in Disc Brake

Dejian Meng, Lijun Zhang, Zhuoping Yu

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2015

面向制动尖叫抑制的制动盘稳健性设计

张立军，庞明，唐传骏，孟德健，余卓平

《汽车工程学报》

2015

摆臂橡胶件对汽车平顺性和悬架运动学影响的研究

韩海兰，李刚，张立军

《汽车实用技术》

2015

A Study on the Bench Test of Friction-Induced Hot Spots in Disc Brake

Cheng Ruan, Lijun Zhang, Dejian Meng

SAE International journal of commercial vehicles

DOI

2015

A dynamic model for brake pedal feel analysis in passenger cars

Dejian Meng, Lijun Zhang, Zhuoping Yu

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2015

A Reduced-Order Model for Complex Modes of Brake Squeal Model and Its Application to a Flexible Pin-on-Disc System

Lijun Zhang, Jun Jie Wu, Dejian Meng

Mathematical Problems in Engineering

DOI

2014

附加拾振传感器对轻质扁平结构模态试验结果的影响分析

董明哲，张立军，应华飞，余卓平

《汽车工程学报》

2014

乘用车制动踏板感觉台架试验研究

孟德建，张立军，余卓平

《汽车工程》

2014

汽车前挡风玻璃结构模态的有限元建模与分析

张立军，孙俊刚，孟德建，刁坤

《汽车工程学报》

2014

The Influence of Vacuum Booster Design Parameters on Brake Pedal Feel

Lijun Zhang, Cheng Ruan, Dejian Meng

SAE International Journal of Passenger Cars - Mechanical Systems

DOI

2014

Mechanism Study on Time-Varying Characteristics of Frictional Squeal in Pin-on-Disc System

Kun Diao, Lijun Zhang, Dejian Meng

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2014

Study on Statistical Analysis of Uncertainty of Disc Brake Squeal

Kun Diao, Lijun Zhang, Dejian Meng

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2014

Prediction of Temperature Field Inside Lithium-Ion Battery Based on Similarity Theory

Lijun Zhang, Hongzheng Cheng, Kun Diao, Cheng Ruan

SAE International journal of passenger cars. Electronic and electrical systems

DOI

2013

制动盘厚薄差对ABS性能的负面影响及控制方法

张立军，黄平宇

《汽车工程》

2013

电动汽车动力电池振动与冲击问题研究综述

张立军，陈华杰，刁坤，阮丞

《电源技术》

2013

制动盘弹性模量对制动尖叫影响的仿真分析

张立军，唐传骏，庞明，孟德健，余卓平

《汽车工程学报》

2013

汽车制动尖叫的稳健性设计综述

张立军，唐传骏，庞明，孟德健，余卓平

《汽车工程学报》

2013

悬架橡胶件对汽车平顺性影响的仿真与实验研究

张立军，陈双，李刚

《汽车工程》

2013

混合动力轿车纯电动模式起步时纵向抖振的试验研究与控制

张立军，郑鹏，孟德建，邓海燕，张舟云

《汽车工程》

2013

提高制动尖叫复模态有限元模型预测精度的方法

刁坤，张立军，孟德建，余卓平

《汽车工程》

2013

Method of electric powertrain matching for battery-powered electric cars

Guobao Ning, Lu Xiong, Lijun Zhang, Zhuoping Yu

Chinese Journal of Mechanical Engineering

DOI

2012

Impact of Contact Pressure Distribution on Break Squeal of Drum Brake

Lijun Zhang, Ming Hua Pang, Dejian Meng, Kun Diao

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2012

Transfer path analysis and control of vehicle structure-borne noise induced by the powertrain

Rong Guo, Shan Qiu, Qin-lin Yu, Hong Zhou, Lijun Zhang

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2012

Interior structure-borne noise reduction by controlling the automotive body panel vibration

Rong Guo, Lijun Zhang, Jing Yi Zhao, Hong Liang Zhou

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2011

主动悬架平顺性和侧倾姿态综合控制策略

陈双，宗长富，张立军，尹刚

《吉林大学学报(工学版)》

2011

半挂汽车列车操纵稳定性的正交仿真分析

张立军，张晓维，马斌

《辽宁工业大学学报(自然科学版)》

2011

电驱动动力总成悬置系统的非线性特性研究

王建，张立军，余卓平

《上海汽车》

2011

电动车动力传动系统的扭转特性研究

王建，梁锐，张立军

《上海汽车》

2010

一种新的橡胶衬套半经验动力学模型

于增亮，张立军，罗鹰

《汽车技术》

2010

基于ADAMS和MATLAB的主动悬架控制联合仿真研究

薛盛兴，张立军，张庆文

《辽宁工业大学学报(自然科学版)》

2010

Experimental Investigation into Friction Induced Noise of Automotive Wiper System

Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2010

Applicability of Different Loudness Models to Time-Varying Sound in Vehicle

Lijun Zhang

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2010

2A32 Simulation and Analysis of Dynamic Characteristics of In-wheel Motor and Tire System

Min Qian, Lijun Zhang

The Proceedings of the Symposium on the Motion and Vibration Control

DOI

2010

3A12 A Novel Empirical Model of Rubber Bushing in Automotive Suspension System

YU Zeng-liang, Lijun Zhang, Zhuoping Yu

The Proceedings of the Symposium on the Motion and Vibration Control

DOI

2010

Nonlinear Dynamic Characteristics of Powertrain Mounting System with Piecewise-linearity Rubber Mounts of Fuel Cell Vehicle

Lijun Zhang

2009

燃料电池轿车电机总成的振动阶次特征分析

王建，张立军，余卓平，梁锐

《汽车工程》

2009

基于道路和台架的制动器振动噪声试验方法研究

余卓平，孟德建，张立军

《汽车技术》

2009

燃料电池轿车电动动力总成悬置系统动态特性分析

王珣，张立军，王建

《汽车技术》

2009

轮毂电机驱动电动微型车车内噪声道路试验分析

于增亮，张立军，孙北

《上海汽车》

2009

混合动力汽车用发动机起动振动与噪声特性初步研究

张立军，叶荫，余卓平

《汽车技术》

2008

复合制动系统制动力协调分配方法仿真研究

余卓平，张元才，徐乐，张立军，熊璐

《汽车技术》

2008

汽车转鼓试验非线性动力学特性与影响因素分析

张乐祎，张立军，徐倜凡，张健

《汽车技术》

2008

非均匀盘式制动器热机耦合特性试验研究

张立军，司杨，余卓平

《汽车技术》

2008

四轮轮毂电机驱动电动汽车扭矩分配控制

余卓平，姜炜，张立军

《同济大学学报(自然科学版)》

2008

Torque Distribution Control for Four Wheel In-Wheel-Motor Electric Vehicle

Lijun Zhang

Journal of Tongji University

2008

Stability Control of Four In-Wheel-Motor Drive Electric Vehicle by Control Allocation

Lijun Zhang

Jisuanji fangzhen

2007

汽车底盘集成控制综述

姜炜，余卓平，张立军

《汽车工程》

2007

基于车辆状态识别的AFS与ESP协调控制研究

高晓杰，余卓平，张立军

《汽车工程》

2007

集成底盘控制系统的控制构架研究

高晓杰，余卓平，张立军

《汽车工程》

2007

悬架橡胶件对汽车平顺性影响的多体动力学分析

张立军，李刚

《农业机械学报》

2007

Brake Judder Induced Steering Wheel Vibration: Experiment, Simulation and Analysis

Lijun Zhang, Guobao Ning, Zhuoping Yu

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2006

盘式制动器制动抖动现象机理研究

李莉，尹东晓，张立军

《汽车工程》

2006

制动抖动引起的转向盘振动传递途径分析

高晓杰，余卓平，张立军

《汽车工程》

2006

路面附着系数估算技术发展现状综述

余卓平，左建令，张立军

《汽车工程》

2006

机械式前轮主动转向系统的原理与应用

高晓杰，余卓平，张立军，蒋励

《汽车工程》

2006

用于车辆稳定性控制的直接横摆力矩及车轮变滑移率联合控制研究

余卓平，高晓杰，张立军

《汽车工程》

2006

制动引起转向盘抖动的传递途径试验研究

宁国宝，张立军，尹东晓，余卓平

《汽车工程》

2006

Application of Co-simulation Technology in Vehicle Stability Control Programming

Lijun Zhang

Jisuanji fangzhen

2005

车辆非匀速行驶时路面随机输入的时频研究

张立军，张天侠

《汽车工程》

2005

基于SIMPACK的汽车平顺性仿真和悬架匹配技术研究

李刚，张立军，张宇，王树军，张丽英

《辽宁工业大学学报(自然科学版)》

2005

电动助力转向系统的技术发展趋势

余卓平，孟涛，陈慧，张立军

《汽车技术》

2005

电动助力转向控制策略研究及试验验证

孟涛，余卓平，陈慧，张立军，陈晖

《汽车技术》

2005

汽车液压减振器热-机耦合特性试验研究

张立军，余卓平，阳鹏

《汽车技术》

2005

盘式制动器制动抖动问题概述

余卓平，尹东晓，张立军，宁国宝

《汽车工程》

2005

减振器的神经网络建模

刘树伟，张立军

《辽宁工业大学学报(自然科学版)》

2005

电液复合制动匹配研究

余卓平，熊璐，张立军

《汽车工程》

2005

车用电制动器(EMB)样机设计

熊璐，余卓平，张立军

《汽车技术》

2004

电动汽车电动轮驱动系统开发现状与趋势

顾云青，张立军

《汽车工程学报》

2004

汽车平顺性非线性模拟分析及软件实现

王岩松，耿艾莉，张立军

《沈阳工业大学学报》

2004

SY6480轻型客车平顺性试验及评价

张立军，陈学文，朱博

《辽宁工程技术大学学报(自然科学版)》

2004

基于小波变换的四轮车辆非平稳振动时频研究

王岩松，耿艾莉，张立军

《汽车工程》

2004

混合动力汽车的研究现状及面临的挑战

阳鹏，余卓平，张立军

《汽车工程学报》

2003

汽车空调用压缩机的振动和噪声分析

黄锁成，靳晓雄，张立军

《汽车技术》

2003

基于神经网络的轻型客车悬架参数的优化

段敏，张立军，石晶，王岩松，耿艾莉

《汽车工程》

2003

汽车筒式液压减振器噪声问题研究动态

张立军，余卓平，靳晓雄

《汽车工程》

2002

轿车车内噪声控制方法研究

张立军，靳晓雄，余卓平，周鋐

《汽车工程》

2002

汽车空调压缩机引起的车内噪声试验研究

张立军，靳晓雄，黄锁成，傅强，杨虎

《汽车工程》

2002

轿车车内噪声源识别的道路试验方法

张立军，靳晓雄，周宏，余卓平，夏小岩

《汽车工程》

2002

汽车空调压缩机的动力学频谱分析和振动分析

黄锁成，靳晓雄，张立军

《上海汽车》

2002

汽车电制动系统(BBW)现状和前景

熊璐，余卓平，张立军

《上海汽车》

2001

汽车多工况平顺性优化初探

韩忠浩，符朝兴，张立军

《现代机械》

2001

发动机振动引起的车内噪声控制研究

张立军，周鋐，余卓平，靳晓雄

《振动、测试与诊断》

2001

汽车用电流变液器件现状与展望

张立军，余卓平

《汽车工程学报》

2000

汽车整车及零部件试验模态分析测试技术

张立军，余卓平，靳晓雄，周宏

《汽车工程学报》

2000

车辆车厢内噪声自适应有源控制

李径定，方卓毅，张立军，罗智中

《汽车技术》

1999

悬架中的橡胶支承及其静、动刚度特性试验研究

温强，余卓平，张立军，张建强，吴良寿

《上海汽车》

1998

质子燃料电池电动汽车的关键技术

李径定，罗智中，张立军

《汽车技术》

1998

汽车前后悬架固有频率的匹配研究

张立军，段敏，何辉

《汽车工程》

1994

钢板弹簧新的计算方法及其在设计中的应用

张立军，何辉，郁工瑞

《汽车工程》

1992

支承销式双向自动增力制动器制动效能因数的计算

张立军

《汽车技术》

1990

用回归分析法研究气制动阀的特性

张立军

《汽车技术》

会议论文

2025

基于高分辨率MEMS麦克风阵列的汽车标模流声分离实验研究

李献生，张天驰，陈羽，赵亚轩，张立军

《2025中国汽车工程学会汽车空气动力学分会学术年会会议论文集》

DOI

2022

基于多通道无延迟子带滤波算法的车内道路噪声主动控制

高赟海，张立军，孟德建，张帅

《2022中国汽车工程学会年会论文集（4）》

DOI

2021

电动车动力传动系统低速抖振分析与控制方法

张立军，王天民，孟德建，徐杰

《2021中国汽车工程学会年会论文集（4）》

DOI

2020

基于XGBoost的电动汽车车内噪声声品质预测

张立军，牛婉，孟德建

《2020中国汽车工程学会年会论文集（4）》

2018

非对称热载荷作用下制动盘温度与变形特性研究

张立军，张竞一，孟德建

《2018中国汽车工程学会年会》

2018

内燃机式增程器扭转振动的建模与分析

张立军，阚毅然，孟德建，余卓平

《2018中国汽车工程学会年会》

2017

乘用车独立悬架侧倾中心设定方法

杨凯，冯红晶，张立军

《第19届亚太汽车工程年会暨2017中国汽车工程学会年会论文集》

2016

汽车制动器摩擦振动自锁-滑动理论分析

张立军，刘理，孟德建

《2016中国汽车工程学会年会暨展览会》

2016

永磁同步电机电磁振动多场耦合建模与分析

张立军，方杰，王心坚，孟德建

《2016中国汽车工程学会年会暨展览会》

2016

基于层次分析法的制动踏板感觉评价方法

张立军，徐亮亮，孟德建

《2016中国汽车工程学会年会暨展览会》

2015

增程器轴系扭转振动阶次成因分析

张立军，罗科，程洪正，孟德建，马晓枫

《2015中国汽车工程学会年会论文集（Volume1）》

2015

盘式制动器活塞-制动背板接触方式对制动尖叫的影响

张立军，殷建波，孟德建，阮丞

《2015中国汽车工程学会年会论文集（Volume4）》

2014

基于平移-扭转模型的行星齿轮系统固有振动特性仿真分析

韩政达，马晓枫，朱文栋，张立军，程洪正，孟德建

《2014中国汽车工程学会年会》

2014

单纵臂式悬架-轮边电驱动系统的有限元建模与静力学分析

杨骏豪，张立军，陈辛波

《2014中国汽车工程学会年会论文集》

2013

悬架非线性对汽车平顺性影响的仿真分析

周妍，张立军

《面向未来的汽车与交通——2013中国汽车工程学会年会论文集精选》

2013

摩擦衬片开槽方式对盘式制动器摩擦尖叫的影响

张立军，陈前银，刁坤，孟德建，余卓平

《面向未来的汽车与交通——2013中国汽车工程学会年会论文集精选》

2013

磁流变液减振器阻尼力预测模型及结构影响分析

张立军，陈飞

《2013中国汽车工程学会年会;面向未来的汽车与交通——2013中国汽车工程学会年会》

2013

抑制非簧载质量振动的混合阻尼控制

张立军，刘昌斌

《2013中国汽车工程学会年会;面向未来的汽车与交通——2013中国汽车工程学会年会》

2013

基于纯扭转模型的行星齿轮系统固有振动特性仿真分析

张立军，朱文栋

《2013中国汽车工程学会年会;面向未来的汽车与交通——2013中国汽车工程学会年会》

2013

制动盘的约束模态与自由模态对比分析

张立军，唐传骏，庞明，孟德健，余卓平

《2013中国汽车工程学会年会;面向未来的汽车与交通——2013中国汽车工程学会年会》

2011

摩擦特性对汽车刮水器动力学特性影响

张立军，吴运明

《2011中国汽车工程学会年会论文集》

2011

悬架减振器与车身间间隙对汽车平顺性的影响

张立军，应华飞

《2011中国汽车工程学会年会论文集》

2011

汽车关门声声品质评价方法的研究

王长山，张立军

《2011中国汽车工程学会年会论文集》

2010

汽车制动盘热翘曲与影响因素仿真分析

陈璐，张立军，孟德建，刁昆，余卓平

《2010中国汽车工程学会年会论文集》

2010

悬架减振器与车身之间间隙检测方法研究

张立军，唐扬扬

《2010中国汽车工程学会年会论文集》

2009

基于多刚体和多柔体方法的汽车悬架振动特性研究

丁利，于增亮，张立军，余卓平

《2009中国汽车工程学会年会论文集》

2009

汽车刮水器摩擦特性试验分析

张立军，王小博

《2009中国汽车工程学会年会论文集》

2009

汽车关门振动与噪声特性试验分析

张立军，于佳

《2009中国汽车工程学会年会》

2009

基于单点接触模型的制动抖动分析

张立军，权循宇

《2009中国汽车工程学会年会》

2009

电动车动力总成悬置系统瞬态振动ADAMS仿真分析

杨晓凤，张立军

《2009中国汽车工程学会年会论文集》

2007

电动车复合制动系统相关问题分析

张元才，余卓平，张立军，熊璐

《2007中国汽车工程学会年会》

2007

制动抖动引起的转向盘振动现象试验与理论分析

张立军，宁国宝，余卓平

《2007中国汽车工程学会年会论文集》

预印本

2026

Policy Optimality Measurement for Multi-Vehicle Decision-Making: From Extrinsic Indicators to Intrinsic Quality

Ye Han, Lijun Zhang, Dejian Meng

arXiv preprint

2025

A Differentiated Reward Method for Reinforcement Learning based Multi-Vehicle Cooperative Decision-Making Algorithms

Ye Han, Lijun Zhang, Dejian Meng, Zhuang Zhang

arXiv preprint

2025

Hybrid Differential Reward: Combining Temporal Difference and Action Gradients for Efficient Multi-Agent Reinforcement Learning in Cooperative Driving

Ye Han, Lijun Zhang, Dejian Meng, Zhuang Zhang

arXiv preprint

2025

Topology Enhanced MARL for Multi-Agent Cooperative Decision-Making of CAVs

Ye Han, Lijun Zhang, Dejian Meng, Zhuang Zhang

arXiv preprint

2024

SPformer: A Transformer Based DRL Decision Making Method for Connected Automated Vehicles

Ye Han, Lijun Zhang, Dejian Meng, Xingyu Hu, Yixia Lu

arXiv preprint

DOI

2024

GITSR: Graph Interaction Transformer-based Scene Representation for Multi Vehicle Collaborative Decision-making

Xingyu Hu, Lijun Zhang, Dejian Meng, Ye Han, Lisha Yuan

arXiv preprint

2023

Vehicle Trajectory Prediction based Predictive Collision Risk Assessment for Autonomous Driving in Highway Scenarios

Dejian Meng, Wei Xiao, Lijun Zhang, Zhuang Zhang, Zihao Liu

arXiv preprint

书籍章节

2020

Experimental Study on Mechanism of Cavity Filler Block to Reduce Interior Noise

Dejian Meng, Ziyi Wang, Lijun Zhang

Lecture notes in electrical engineering

DOI

2014

Modeling and Analysis of Torsional Vibration on Engine-generator System of Hybrid Electric Vehicle

Xiaofeng Ma, Ke Luo, Lijun Zhang, Hongzheng Cheng, Dejian Meng

Lecture notes in electrical engineering

DOI

2012

Thermal Modeling and Effects of Electrode Configuration on Thermal Behaviour of a LiFePO4 Battery

Cheng Ruan, Kun Diao, Huajie Chen, Yan Zhou, Lijun Zhang

Lecture notes in electrical engineering

DOI

研究方向

汽车振动噪声与智能控制车辆系统动力学智能控制电动汽车动力系统集成与控制

此主页由公开资料整理，尚未经学者本人认领。