百晓学者学者目录

张松

博导、教授，沈阳工业大学

精选作品

期刊论文

2025

合金元素Nb对激光熔覆铁基合金组织及性能的影响

梁旭东，张松，王莉，吴臣亮，霍凤萍

《沈阳工业大学学报》

2025

304不锈钢表面激光熔覆铁基合金组织及抗空蚀性能

金峰，张松，王莉，吴臣亮，霍莎

《沈阳工业大学学报》

2025

Effect of Cr/V ratio on the microstructure evolution and tensile behavior of a high-vanadium high-speed steel

Zhengyu Du, Xipeng Tao, Xinguang Wang, He Li, Rui Zhang, Rui Zhang, Zijian Zhou, Song Zhang, Rashad Ahmed Al-Hammadi, Yizhou Zhou, Chuanyong Cui

Materials Science and Engineering A

DOI

2025

Modulating Heat Input to Optimize Corrosion Resistance of Nickel–Aluminum Bronze Manufactured by Cold Metal Transfer Additive Manufacturing

Renjie Huo, Zheying Wang, Mingsheng Wang, Rui Wang, Song Zhang, Chunhua Zhang, Chengliang Wu, Haitao Chen, Chen Hui Jiang

Materials

DOI

2025

Effect of Tempering Temperature on the Microstructure, Mechanical, and Wear Failure Behaviors of a Novel High‐Vanadium High‐Speed Steel

R. Zhang, R. Zhang, Xipeng Tao, Xinguang Wang, Rui Zhang, Rui Zhang, Zijian Zhou, C.H. Zhang, Song Zhang, Xiaofeng Sun, Yizhou Zhou, Chuanyong Cui

steel research international

DOI

2025

Low cycle fatigue behaviors and deformation mechanisms of the [011] oriented fourth-generation Nickel-based single crystal superalloy at 1000 °C

Shida Huo, Yuhang Dai, Xinguang Wang, Zihao Tan, Zhaoyang Liang, Yanfei Liu, Yongmei Li, Xipeng Tao, Yan Tao, Chunhua Zhang, Song Zhang, Jinguo Li, Yizhou Zhou, Xiaofeng Sun

Intermetallics

DOI

2025

Normalizing temperature dependence on microstructure, mechanical and wear properties of a novel high‑vanadium high-speed steel

Dingchen Wang, Xipeng Tao, Xinguang Wang, Rui Zhang, Zijian Zhou, Song Zhang, C.H. Zhang, Xiaofeng Sun, Yizhou Zhou, Chuanyong Cui

Materials Characterization

DOI

2025

Effect of orientation on the stress rupture properties of a Ru-containing fourth-generation single crystal superalloy at 1140 ℃

Q.Y. Guan, Y.M. Li, X.G. Wang, Zihao Tan, Y. Mu, X.P. Tao, C.H. Zhang, Song Zhang, J.D. Liu, Jinguo Li, Y. Zhou, X.F. Sun

Materials Today Communications

DOI

2025

Effect of laser energy density on the microstructure and performance of homogeneous-material laser cladding repair layers for TA15 titanium alloy

Tianyuan Zhao, Zheying Wang, Hao Wu, Mingsheng Wang, C.L. Wu, C.H. Zhang, Song Zhang, Haitao Chen

Materials Science and Technology

DOI

2024

Creep anisotropy of a low-cost third generation single crystal superalloy at 760 °C and 1120 °C

Q.Y. Guan, Y.M. Li, X.G. Wang, Zhaojun Chu, Zihao Tan, Z.Y. Liang, X.P. Tao, Yanhong Yang, J.L. Liu, Jide Liu, Chipeng Zhang, Song Zhang, Jinguo Li, Y. Zhou, Xiaojuan Sun

Materials Science and Engineering A

DOI

2024

Effect of Main Arc Current on Microstructure and Cavitation Resistance of NiCrBSi-WC Alloy Coating Prepared by Plasma Transfer Arc Welding

G. X. Zhou, Tong Zhao, M. S. Wang, C. L. Wu, Song Zhang, C.H. Zhang, H.T. Chen, Jianmin Chen

Journal of Thermal Spray Technology

DOI

2024

Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels

Tingting Xu, Tao Wang, M.S. Wang, Song Zhang, C.H. Zhang, C.L. Wu, Xiangyu Sun, H.T. Chen, Jie Chen

Materials Science and Engineering A

DOI

2024

Study on microstructure and cavitation corrosion resistance of 304 stainless steel after surface rolling

G.X. Zhou, Tianshuo Zhao, Z.Y. Wang, Song Zhang, C.L. Wu, C.H. Zhang, H.T. Chen

Materials Chemistry and Physics

DOI

2024

Iso-Material Manufactured 17-4PH Stainless Steel to Enhance the Nano-indentation, Corrosion, and Cavitation Erosion Behavior

Dan Yu, Ruzhuan Wang, C. L. Wu, Song Zhang, C.H. Zhang, H.T. Chen, X. P. Tao

Journal of Materials Engineering and Performance

DOI

2024

Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures

Shida Huo, Xinguang Wang, Zihao Tan, Yongmei Li, Yan Tao, Chunhua Zhang, Song Zhang, Xipeng Tao, Yunling Du, Yanhong Yang, Jide Liu, Jinlai Liu, Jinguo Li, Yizhou Zhou, Xiaofeng Sun

Intermetallics

DOI

2024

Dependence of molybdenum content on the cavitation corrosion synergy and wear failure of laser cladded CoCrFeNiMnMo high entropy alloy coatings

Dingchen Wang, Xipeng Tao, Song Zhang, Xinguang Wang, C.L. Wu, C.H. Zhang, Haitao Chen, Xiaofeng Sun, Yizhou Zhou

Engineering Failure Analysis

DOI

2024

Effect of Ta on Tensile Behavior and Deformation Mechanism of a Nickel-Based Single Crystal Superalloy

Mingtao Ge, Xinguang Wang, Yongmei Li, Zihao Tan, Xipeng Tao, Yanhong Yang, Liang Wang, Chunhua Zhang, Song Zhang, Yizhou Zhou, Xiaofeng Sun

Acta Metallurgica Sinica (English Letters)

DOI

2024

Influence of various heat treatment processes behavior of a novel maraging steel coating process on the microstructure, nanoindentation pattern, and wear

Tingting Xu, Tao Wang, Ruzhuan Wang, Song Zhang, C.H. Zhang, C.L. Wu, X.Y. Sun, H.T. Chen, Jie Chen

Surface and Coatings Technology

DOI

2024

Effects of heat treatment on the nano-indentation, corrosion and cavitation erosion behavior of 17-4PH stainless steel by laser surface melting

Dan Yu, C.L. Wu, Song Zhang, C.H. Zhang, H.T. Chen, X.P. Tao

Surface and Coatings Technology

DOI

2024

Microstructure, tribological property and high temperature tensile property of Co-Cr-Ni-W alloy parts fabricated by laser directed energy deposition

Yanping Huang, Hui Wu, Tingting Xu, R. Wang, Song Zhang, C.H. Zhang, C.L. Wu, H.T. Chen

Surface and Coatings Technology

DOI

2024

Study on Microstructure and Fatigue Properties of A473M Stainless Steel Strengthened by Surface Rolling

G. X. Zhou, C.H. Zhang, Lujia Wang, C. L. Wu, Song Zhang, H.T. Chen

Journal of Materials Engineering and Performance

DOI

2024

Mechanical properties and corrosion resistance of laser cladding iron-based coatings with two types of NbC reinforcement

H.F. Zhang, Song Zhang, Hao Wu, R. Wang, C.H. Zhang, C.L. Wu, Juzhao Chen, H.T. Chen

Surface and Coatings Technology

DOI

2024

Effect of aging treatment on the microstructure and tribological properties of a new maraging steel manufactured by laser directed energy deposition

Yong Du, Tingting Xu, Song Zhang, C.L. Wu, C.H. Zhang, Xiangyu Sun, H.T. Chen, Jun Chen

Materials Characterization

DOI

2024

Iso-material manufacturing of 304 stainless steel: Microstructure, corrosion-cavitation erosion synergistic behaviour

Bosheng Cao, Chengliang Wu, Li Wang, Song Zhang, Chunhua Zhang, Xueying Sun

Materials Science and Technology

DOI

2023

Development and characterization of a novel maraging steel fabricated by laser additive manufacturing

Tingting Xu, Song Zhang, Yong Du, C.L. Wu, C.H. Zhang, Xiangyu Sun, H.T. Chen, Jie Chen

Materials Science and Engineering A

DOI

2023

Effects of Dual‐Phase Region Quenching Treatment on Microstructure and Mechanical Properties of 24CrNiMo Low‐Alloy Steel Prepared by Selective Laser Melting

Xue Cui, Tao Wang, Li Sheng Wang, Song Zhang, Chunhua Zhang, Chengliang Wu, Weian Zong, Xueying Sun, Haitao Chen

steel research international

DOI

2023

Comparative Study on the Microstructure, Wear Behavior, and Corrosion Performance of Iron-Based and Cobalt-Based Coatings Fabricated by Laser Cladding

F. Jin, Song Zhang, C. L. Wu, C.H. Zhang, Xiankai Sun, Xuefeng Bai

Journal of Materials Engineering and Performance

DOI

2023

Low cycle fatigue behavior and microstructure evolution of a fourth-generation single crystal superalloy at 800 °C

Zhi‐Shan Liang, Zihao Tan, C.H. Zhang, Song Zhang, X.P. Tao, X.G. Wang, S.M. Abbas Jafri, Z.W. Shi, Yanhong Yang, Jide Liu, J.L. Liu, Jinguo Li, Yuduo Zhou, Xiaojuan Sun

Materials Characterization

DOI

2023

Cavitation erosion and corrosion-cavitation synergism behaviour of CoCrFeNiMnTi x high entropy alloy coatings prepared by laser cladding

D. C. Wang, C. L. Wu, Song Zhang, C.H. Zhang, D.X. Zhang, Xiaolin Sun

Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control

DOI

2023

Influence of scanning speed on the microstructure, nanoindentation characteristics and tribological behavior of novel maraging steel coatings by laser cladding

Tingting Xu, Song Zhang, Lei Wang, Yong Du, C.L. Wu, C.H. Zhang, Xiangyu Sun, H.T. Chen, Jie Chen

Materials Characterization

DOI

2023

Effect of Austempering Temperature on Microstructure and Deformation Behavior of Selective Laser Melting 24CrNiMo-Steel

F. Z. Wang, C.H. Zhang, Z. Y. Wang, X. Cui, Song Zhang, J. Chen

Journal of Materials Engineering and Performance

DOI

2023

An investigation on wear and cavitation erosion-corrosion characteristics of the TiC modified Fe-based composite coating via laser cladding

H.F. Zhang, L. Wang, Song Zhang, C.L. Wu, C.H. Zhang, Xiaolin Sun, J. Chen

Journal of Materials Research and Technology

DOI

2023

Effect of residual stress and phase constituents on corrosion-cavitation erosion behavior of 304 stainless steel by iso-material manufacturing of laser surface melting

B.S. Cao, C.L. Wu, L. Wang, Song Zhang, C.H. Zhang, Xu Sun

Journal of Materials Research and Technology

DOI

2023

Effect of synergistic cavitation erosion-corrosion on cavitation damage of CoCrFeNiMn high entropy alloy layer by laser cladding

Tong Gang Zhao, L. Wang, Song Zhang, C.H. Zhang, X.Y. Sun, H.T. Chen, X.L. Bai, C.L. Wu

Surface and Coatings Technology

DOI

2023

Corrosion and cavitation erosion behaviors of laser clad FeNiCoCr high-entropy alloy coatings with different types of TiC reinforcement

Hao Wu, L. Wang, Song Zhang, C.L. Wu, C.H. Zhang, Xiaodong Sun

Surface and Coatings Technology

DOI

2023

Influence of Ta + Al on the microstructure evolution of two Ru-containing Ni-based single crystal superalloys deposited with γ′ + β NiAl coating at extremely high temperature

M.T. Ge, Y.M. Li, Zihao Tan, X.P. Tao, Yanhong Yang, Jide Liu, J.L. Liu, M.K. Zou, C.H. Zhang, Song Zhang, X.G. Wang, Jinguo Li, Yuduo Zhou, Xiaojuan Sun

Surface and Coatings Technology

DOI

2023

Wear and corrosion of CoCrFeNiMnTi x high entropy alloy coatings by laser cladding

D.C. Wang, C.L. Wu, Song Zhang, C.H. Zhang, D.X. Zhang, X.Y. Sun

Materials Science and Technology

DOI

2023

Design, fabrication, microstructure and properties of in-situ synthesized TiC reinforced stainless steel matrix composite coating by laser cladding

H.F. Zhang, L. Wang, Song Zhang, C.L. Wu, C.H. Zhang, Xiaolin Sun

Materials Characterization

DOI

2023

Microstructural Evolution and Properties of Novel Ferritic Stainless Steel–Mox Prepared by Laser Melting Deposition

H.F. Zhang, Song Zhang, C. L. Wu, C.H. Zhang, Xuefeng Bai, Xiankai Sun, J. Chen

Journal of Thermal Spray Technology

DOI

2023

Research Progress on Mechanical Properties of 3D Printed Biomedical Titanium Alloys

Ying Hao Sun, Wenchao Hu, Chengliang Wu, Hai Kuang, Jie Wang, Song Zhang, Tingting Yan, Qiang Wang

Journal of Materials Engineering and Performance

DOI

2023

Microstructure and corrosion behaviour of WC-Co coating fabricated by plasma arc welding

H.F. Zhang, Song Zhang, C. L. Wu, C.H. Zhang, Xuefeng Bai, Xiankai Sun, J. Chen

Materials Science and Technology

DOI

2023

Modulating Surface Machining to Optimize Work Hardening and Corrosion Behavior in 304 Austenitic Stainless Steel

C. L. Wu, Tong Gang Zhao, Song Zhang, Z. Y. Wang, C.H. Zhang, J. Z. Tan

Journal of Materials Engineering and Performance

DOI

2023

Effect of Ni and Fe elements on microstructure and high temperature oxidation behavior of laser cladding aluminum bronze coating

F. Jin, Tingting Yin, Song Zhang, Chunyan Wu, C.H. Zhang, J. Chen

Materials Chemistry and Physics

DOI

2022

Characterisation of heat-treated gradient alloy steel fabricated by laser melting deposition

Xiaofeng Liang, Song Zhang, Z.Y. Wang, C.H. Zhang, D.X. Zhang, C.L. Wu

Materials Science and Technology

DOI

2022

Effect of Rolling on Microstructure Evolution and Plastic Deformation Behavior of A473M Martensitic Stainless Steel

Fengzhen Wang, C.H. Zhang, Zheying Wang, Chengliang Wu, Song Zhang, Dongxue Zhang

steel research international

DOI

2022

Microstructure and fatigue behavior of 24CrNiMo low alloy steel prepared by selective laser melting

X. Cui, Song Zhang, Z.Y. Wang, C.H. Zhang, C.L. Ni, C.L. Wu

Materials Science and Engineering A

DOI

2022

Effect of laser energy density on microstructural evolution and wear resistance of modified aluminum bronze coatings fabricated by laser cladding

Tingting Yin, Song Zhang, Z.Y. Wang, C.H. Zhang, Y. Liu, J. Chen

Materials Chemistry and Physics

DOI

2022

Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior

C.L. Wu, Tingting Xu, Z.Y. Wang, C.H. Zhang, Song Zhang, C.L. Ni, D.X. Zhang

Ceramics International

DOI

2022

Phase evolution, microstructure, microhardness and corrosion performance of CoCrFeNiNb x high entropy alloy coatings on 316 stainless steel fabricated by laser cladding

H. Wu, Song Zhang, Z. Y. Wang, C.H. Zhang, D.X. Zhang, H. T. Chen, C. L. Wu

Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control

DOI

2022

A test method for the normal interface bonding strength of laser cladding

Ming Nie, Song Zhang, Z. Y. Wang, C.H. Zhang, H.T. Chen, Jianxun Chen

Materials Science and Technology

DOI

2022

Effect of Energy Density on the Defects, Microstructure, and Mechanical Properties of Selective-Laser-Melted 24CrNiMo Low-Alloy Steel

F. Z. Wang, C.H. Zhang, X. Cui, Feng Zhou, Song Zhang, H.T. Chen, J. Chen

Journal of Materials Engineering and Performance

DOI

2022

Effects of Heat Treatment on Microstructure and Wear Behavior of Modified Aluminum Bronze Coatings Fabricated by Laser Cladding

Tingting Yin, Song Zhang, Feng Zhou, Ran Huo, C.H. Zhang, J. Chen

Journal of Materials Engineering and Performance

DOI

2022

Microstructure and corrosion behaviour of WC/NiCrBSi coatings by vacuum cladding

H.F. Zhang, C.H. Zhang, Z.Y. Wang, X. Cui, Song Zhang, H.T. Chen

Materials Science and Technology

DOI

2021

Development of a novel method for measuring the interfacial bonding strength of laser cladding coatings

Ming Nie, Song Zhang, Z.Y. Wang, H.F. Zhang, C.H. Zhang, H.T. Chen

Optics & Laser Technology

DOI

2021

New studies on wear and corrosion behavior of laser cladding FeNiCoCrMox high entropy alloy coating: The role of Mo

Hao Wu, Song Zhang, Z.Y. Wang, C.H. Zhang, H.T. Chen, J. Chen

International Journal of Refractory Metals and Hard Materials

DOI

2021

Effect of laser power on microstructure and interfacial bonding strength of laser cladding 17-4PH stainless steel coatings

Ming Nie, Song Zhang, Z.Y. Wang, C.H. Zhang, H.T. Chen, J. Chen

Materials Chemistry and Physics

DOI

2021

Microstructure evolution and properties of in-situ TiC reinforced titanium matrix composites coating by plasma transferred arc welding (PTAW)

Tong Gang Zhao, Song Zhang, Feng Zhou, H.F. Zhang, C.H. Zhang, J. Chen

Surface and Coatings Technology

DOI

2021

A comparison on microstructure features of 24CrNiMo low alloy steel prepared by selective laser melting and laser melting deposition

X. Cui, Song Zhang, C.H. Zhang, J. Chen, J.B. Zhang, Shiming Dong

Vacuum

DOI

2021

Novel Gradient Alloy Steel with Quasi‐Continuous Ratios Fabricated by Selective Laser Melting: Microstructure and Corrosion Behavior

Xu Wang, Chun Hua Zhang, Feng Zhou, Song Zhang, Jiang Chen, Jing Bo Zhang

steel research international

DOI

2021

Microstructural, electrochemical and wear-corrosion characterization of TC4-5Cu alloy fabricated by selective laser melting

Jiajun Chen, C.H. Zhang, Feng Zhou, Song Zhang, H.T. Chen, Qiang Wang

Journal of Alloys and Compounds

DOI

2021

Additive manufacturing of novel ferritic stainless steel by selective laser melting: Role of laser scanning speed on the formability, microstructure and properties

P.F. Jiang, C.H. Zhang, Song Zhang, J.B. Zhang, J. Chen, H.T. Chen

Optics & Laser Technology

DOI

2021

Comparative study on the cavitation erosion behavior of two different rolling surfaces on 304 stainless steel

Z.X. Li, Lian-min ZHANG, A.L. Ma, J.X. Hu, Song Zhang, Enobong Felix Daniel, Yugui Zheng

Tribology International

DOI

2021

Novel gradient alloy steel with quasi-continuous ratios fabricated by SLM: Material microstructure and wear mechanism

X. Wang, C.H. Zhang, X. Cui, Song Zhang, J. Chen, J.B. Zhang

Materials Characterization

DOI

2021

Additive manufacturing of 24CrNiMo low alloy steel by selective laser melting: Influence of volumetric energy density on densification, microstructure and hardness

X. Cui, Song Zhang, C.H. Zhang, J. Chen, J.B. Zhang, Shiming Dong

Materials Science and Engineering A

DOI

2020

高性能梯度功能材料激光增材制造研究现状及展望

崔雪，张松，张春华，吴臣亮，王强，董世运

《材料工程》

2020

Understanding the roles of deformation-induced martensite of 304 stainless steel in different stages of cavitation erosion

L.M. Zhang, Zhiming Li, J.X. Hu, A.L. Ma, Song Zhang, Enobong Felix Daniel, Aniefiok Joseph Umoh, H.X. Hu, Yugui Zheng

Tribology International

DOI

2020

Microstructure evolution, wear behavior, and corrosion performance of alloy steel gradient material fabricated by direct laser deposition

P.F. Jiang, C.H. Zhang, Song Zhang, J.B. Zhang, J. Chen, Y. Liu

Journal of Materials Research and Technology

DOI

2020

Formability, Microstructure and Properties of CxCrNiV Low-Alloy Steel Fabricated by Laser Melting Deposition

Mingsai Zhang, Song Zhang, X. Cui, C.H. Zhang, Jiajing Chen, J.B. Zhang

Journal of Materials Engineering and Performance

DOI

2020

Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying

P.F. Jiang, C.H. Zhang, Song Zhang, J.B. Zhang, J. Chen, Y. Liu

Materials Chemistry and Physics

DOI

2020

Effects of stress-relief heat treatment on the microstructure and fatigue property of a laser additive manufactured 12CrNi2 low alloy steel

X. Cui, Song Zhang, C. Wang, C.H. Zhang, J. Chen, J.B. Zhang

Materials Science and Engineering A

DOI

2020

Effect of Heat Treatment on Microstructural Evolution and Tribological Characteristic of a Laser Melting Deposited 12CrNi2V Low‐Alloy Steel

Xu Tang, Song Zhang, Xue Cui, Chunhua Zhang, Yu Liu, Jingbo Zhang

steel research international

DOI

2020

Effect of Temper on Deformation and Mechanical Behaviors of Laser Melt-Deposited 12CrNi2 Low-Alloy Steel

Zhiming Li, Song Zhang, X. Cui, C.H. Zhang, Juzhao Chen, J. B. Zhang

Journal of Materials Engineering and Performance

DOI

2020

Microstructure and properties of a novel wear- and corrosion-resistant stainless steel fabricated by laser melting deposition

Yurou Han, Chunhua Zhang, Xue Cui, Song Zhang, Jiang Chen, Shiyun Dong, Adil Othman Abdullah

Journal of materials research/Pratt's guide to venture capital sources

DOI

2020

Scanning velocity influence on microstructure evolution and mechanical properties of laser melting deposited 12CrNi2 low alloy steel

Yanlong Xu, C.H. Zhang, Song Zhang, Ruiqing Qiao, Jia-Wei Zhang, Adil Othman Abdullah

Vacuum

DOI

2020

Design and characterization of selective laser‐melted Ti6Al4V–5Cu alloy for dental implants

Weian Zong, Song Zhang, Chunhua Zhang, Ling Ren, Qiang Wang

Materials and Corrosion

DOI

2020

The formability and microstructure evolution of 24CrNiMo alloy steel fabricated by selective laser melting

Ying Han, C.H. Zhang, X. Cui, Song Zhang, J.B. Zhang, Y. Liu

Vacuum

DOI

2020

Microstructure and Properties of CeO2-Modified FeCoCrAlNiTi High-Entropy Alloy Coatings by Laser Surface Alloying

P. F. Jiang, C.H. Zhang, C. L. Wu, Song Zhang, Jingwen Zhang, Adil Othman Abdullah

Journal of Materials Engineering and Performance

DOI

2020

Microstructure and mechanical behavior of additive manufactured Cr–Ni–V low alloy steel in different heat treatment

X. Wang, C.H. Zhang, X. Cui, Song Zhang, J. Chen, J.B. Zhang

Vacuum

DOI

2020

Microstructure features of 24CrNiMo alloy steel fabricated by laser additive manufacturing

Yunhua Xu, Chunhua Zhang, Zhang Song, QIAO Rui-qing, ZHANG Jing-bo

DOAJ (DOAJ: Directory of Open Access Journals)

DOI

2020

Research status and prospect of laser additive manufacturing technology for high performance gradient functional materials

Xue Cui, Zhang Song, Chunhua Zhang, WU Chen-liang, Qiang Wang, 董世运

DOAJ (DOAJ: Directory of Open Access Journals)

DOI

2019

Microstructure and corrosion behaviors of FeCrNiBSiMox stainless steel fabricated by laser melting deposition

Jiawan Chen, Chunhua Zhang, Xue Cui, Song Zhang, Jiang Chen, Jingbo Zhang

Materials and Corrosion

DOI

2019

Microstructure and fatigue behavior of a laser additive manufactured 12CrNi2 low alloy steel

X. Cui, Song Zhang, C. Wang, C.H. Zhang, J. Chen, J.B. Zhang

Materials Science and Engineering A

DOI

2019

Preparation and Characterization of In Situ Carbide Particle Reinforced Fe-Based Gradient Materials by Laser Melt Deposition

Weian Zong, Song Zhang, Chunhua Zhang, Chengliang Wu, Jingbo Zhang, Yu Liu, Adil Othman Abdullah

Coatings

DOI

2019

The impact of powder oxygen content on formability of 12CrNi2 alloy steel fabricated by laser melting deposition

X. Cui, Song Zhang, C.H. Zhang, C. L. Wu, J.B. Zhang, Y. Liu, Adil Othman Abdullah

Powder Metallurgy

DOI

2019

Microstructure and wear resistance of in situ synthesized particle-reinforced novel stainless steel by laser melting deposition

C Wang, C.H. Zhang, Song Zhang, C L Wu, J B Zhang, Y Liu, X X Pu

Materials Research Express

DOI

2019

Design, preparation, microstructure and properties of novel wear-resistant stainless steel-base composites using laser melting deposition

Xingzhang Li, C.H. Zhang, Song Zhang, C.L. Wu, J.B. Zhang, H.T. Chen, Adil Othman Abdullah

Vacuum

DOI

2019

Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition

C.L. Wu, Song Zhang, C.H. Zhang, J.B. Zhang, Yougen Liu, J. Chen

Optics & Laser Technology

DOI

2019

Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

Xingzhang Li, C.H. Zhang, Song Zhang, C.L. Wu, Y. Liu, J.B. Zhang, M. Babar Shahzad

Optics & Laser Technology

DOI

2018

Monel合金表面激光熔覆Ni基稀土合金空蚀性能

张松，武世奇，崔文东，何斯文，张春华，关锰

《稀有金属材料与工程》

2018

A high strength low alloy steel fabricated by direct laser deposition

Qiang Wang, Song Zhang, Chunhua Zhang, Jian‐Qiang Wang, M. Babar Shahzad, Haitao Chen, Jiang Chen

Vacuum

DOI

2018

Thermal stability and corrosion resistance in a novel nickle aluminum bronze coating by laser cladding

X P Tao, Song Zhang, Chunyan Wu, C.H. Zhang, Jingwen Zhang, Y Liu

Materials Research Express

DOI

2018

Effects of V and Cr on Laser Cladded Fe-Based Coatings

Haiyang Wang, Song Zhang, Chunhua Zhang, Chengliang Wu, Jingbo Zhang, Adil Othman Abdullah

Coatings

DOI

2018

Effect of Nb addition on microstructure and corrosion resistance of novel stainless steels fabricated by direct laser metal deposition

S Q Wu, C.H. Zhang, Song Zhang, Q Wang, Y Liu, Adil Othman Abdullah

Materials Research Express

DOI

2018

Phase evolution and wear resistance of in situ synthesized V8C7 particles reinforced Fe-based coating by laser cladding

C. Wang, Song Zhang, C.H. Zhang, C.L. Wu, J.B. Zhang, Adil Othman Abdullah

Optics & Laser Technology

DOI

2018

Effect of Fe and Ni contents on microstructure and wear resistance of aluminum bronze coatings on 316 stainless steel by laser cladding

X.P. Tao, Song Zhang, C.H. Zhang, C.L. Wu, J. Chen, Adil Othman Abdullah

Surface and Coatings Technology

DOI

2018

Formation mechanism and phase evolution of in situ synthesizing TiC-reinforced 316L stainless steel matrix composites by laser melting deposition

C.L. Wu, Song Zhang, C.H. Zhang, J.B. Zhang, Yong Liu

Materials Letters

DOI

2017

WxC增强镍基合金等离子堆焊层组织与空蚀性能

刘舜尧，张松，崔文东，张春华，吴臣亮，孙足来

《焊接学报》

2017

堆焊电流对镍基合金等离子堆焊层组织及性能的影响

崔文东，王爽，张松，谭俊哲，关锰，刘凯

《焊接》

2017

高能脉冲类激光熔覆镍基合金层的组织及性能

张松，李丹，崔文东，谭俊哲，关锰

《沈阳工业大学学报》

2017

类激光熔覆Stellite合金沉积层的组织及磨损性能

张春华，丁燕燕，关锰，谭俊哲，张松

《沈阳工业大学学报》

2017

Effect of Ni content on stainless steel fabricated by laser melting deposition

H. Zhang, C.H. Zhang, Qiang Wang, C.L. Wu, Song Zhang, J. Chen, Adil Othman Abdullah

Optics & Laser Technology

DOI

2017

Functionally Graded Stainless Steel Fabricated by Direct Laser Deposition: Anisotropy of Mechanical Properties and Hardness

Qiang Wang, Song Zhang, Chunhua Zhang, Chengliang Wu, Ling Ren, Jianqiang Wang, Chen Hui Jiang

Acta Metallurgica Sinica (English Letters)

DOI

2017

Effect of Cr 3 C 2 content on 316L stainless steel fabricated by laser melting deposition

Shangan Wang, Song Zhang, C.H. Zhang, C.L. Wu, J. Chen, M. Babar Shahzad

Vacuum

DOI

2017

In situ synthesised WC-reinforced Co-based alloy layer by vacuum cladding

X. P. Tao, Song Zhang, C. L. Wu, C.H. Zhang, J. Chen, Adil Othman Abdullah

Surface Engineering

DOI

2017

Multi-layer functional graded stainless steel fabricated by laser melting deposition

C.H. Zhang, H. Zhang, C.L. Wu, Song Zhang, Zhuangweici Sun, Shiyun Dong

Vacuum

DOI

2017

Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X 0.5 coatings on cp Cu by laser high-entropy alloying

C.L. Wu, Song Zhang, C.H. Zhang, Junshuai Chen, Shiyun Dong

Optics & Laser Technology

DOI

2017

Microstructure evolution and EBSD analysis of a graded steel fabricated by laser additive manufacturing

Qiang Wang, Song Zhang, Chunhua Zhang, Chengliang Wu, Jianqiang Wang, Jiang Chen, Zulai Sun

Vacuum

DOI

2017

Phase evolution and properties in laser surface alloying of FeCoCrAlCuNi high-entropy alloy on copper substrate

C.L. Wu, Song Zhang, C.H. Zhang, H. Zhang, Shiyun Dong

Surface and Coatings Technology

DOI

2017

Cavitation erosion and erosion-corrosion resistance of austenitic stainless steel by plasma transferred arc welding

Song Zhang, Shangan Wang, C.L. Wu, C.H. Zhang, Mengxiang Guan, J.Z. Tan

Engineering Failure Analysis

DOI

2016

不锈钢表面FeCoCrAlCuNiMox激光高熵合金化层的相演变

吴臣亮，张松，张春华，关锰，谭俊哲

《金属学报》

2016

铁基非晶态合金涂层表面耐磨损及耐腐蚀性能

赵国强，张松

《稀有金属材料与工程》

2016

Phase evolution and cavitation erosion-corrosion behavior of FeCoCrAlNiTi x high entropy alloy coatings on 304 stainless steel by laser surface alloying

C.L. Wu, Song Zhang, C.H. Zhang, H. Zhang, Shiyun Dong

Journal of Alloys and Compounds

DOI

2016

Laser cladding of NiCrSiB on Monel 400 to enhance cavitation erosion and corrosion resistance

Chunhua Zhang, Chengliang Wu, Song Zhang, Yong‐Feng Jia, Meng Guan, Junzhe Tan, Bin Lin

Rare Metals

DOI

2016

Microstructure and Property of Fe-Based Alloy Modified Layer on 304 Stainless Steel by High-Energy Pulse Laser-Like Cladding (HPLC)

C.H. Zhang, Y.F. Jia, Mengxiang Guan, C.L. Wu, Jibo Tan, Song Zhang

Materials science forum

DOI

2016

Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance

Song Zhang, C.L. Wu, C.H. Zhang, Mengxiang Guan, J.Z. Tan

Optics & Laser Technology

DOI

2015

316L不锈钢表面激光熔覆钴基合金组织及锌蚀机理

张春华，刘杰，吴臣亮，张松，关锰，谭俊哲

《焊接学报》

2014

SCH13钢表面微弧火花沉积Stellite合金

张松，伊俊振，吴臣亮，张春华，王明生，谢玉江，谭俊哲

《焊接学报》

2014

铁单元素基合金表面激光高熵合金化涂层的制备

张松，吴臣亮，王超，伊俊振，张春华

《金属学报》

2014

FexCoCrAlCu/Q235激光合金化层组织及性能研究

张松，吴臣亮，伊俊振，王超，张春华，关锰，谭俊哲

《中国激光》

2014

Synthesis and characterization of FeCoCrAlCu high-entropy alloy coating by laser surface alloying

Song Zhang, C.L. Wu, Jiang Yi, C.H. Zhang

Surface and Coatings Technology

DOI

2014

Phase evolution characteristics of FeCoCrAlCuVxNi high entropy alloy coatings by laser high-entropy alloying

Song Zhang, C.L. Wu, C.H. Zhang

Materials Letters

DOI

2014

Laser Cladding of Co-Based Alloy on 316 Stainless Steel

Song Zhang, Chen Wu, Jie Liu, Chun Hua Zhang, Jun Zhe Tan

Advanced materials research

DOI

2013

Monel合金表面激光熔覆镍基合金的组织及摩擦磨损性能

张松，周磊，郝玉喜，张春华，王东生，王茂才

《焊接学报》

2013

Effects of Laser Melting Treatment on Cavitation Erosion of 17-4PH Steel

Song Zhang, Xu Bian, Yu Hang Ren, Chao Wang, Chun Hua Zhang

Advanced materials research

DOI

2012

Preparation of Ni-Base Alloy Coatings on Monel Alloy by Laser Cladding

Chun Hua Zhang, Yu Xi Hao, Lin Qi, Fang Hu, Song Zhang, Mao Cai Wang

Advanced materials research

DOI

2011

Fabrication of NiTi Alloy Coating on 2Cr13 Stainless Steel by Laser Cladding

Chun Hua Zhang, Shuang Li, Lin Qi, Yu Hang Ren, Song Zhang, Mao Cai Wang

Advanced materials research

DOI

2011

Study on Wear and Corrosion Properties of Ti6Al4V Alloy by Laser Gas Nitriding

Chun Hua Zhang, Li Tang, Fang Hu, Song Zhang, H.C. Man

Advanced materials research

DOI

2011

Electrochemical Corrosion Behavior of Laser Gas Nitrided Layer on the NiTi Shape Memory Alloy in Hank’s Solution

Song Zhang, Hu Jiao Tang, Fang Hu, Chun Hua Zhang, H.C. Man, Qiao Qian Zhang

Advanced materials research

DOI

2010

爆炸喷涂WC-12Co/MoS2复合涂层的摩擦磨损性能

张松，张开祥，胡方，张春华，颜永根

《焊接学报》

2010

SCH13钢表面激光熔覆CoNiCrAlY合金

张松，王明生，张开祥，张春华，颜永根

《焊接学报》

2008

NiTi形状记忆合金在蒸馏水介质中的微动磨损特性

张松，张春华，张卓，韩忠，王强，张扬

《稀有金属材料与工程》

2008

激光反应合成TiCp/Ti复合材料涂层机理分析

张松，关祥楠，张春华，吴维，王茂才

《焊接学报》

2008

耐热钢表面激光熔覆Co基合金涂层的高温性能

张松，张春华，王明生，王茂才，刘常升

《腐蚀科学与防护技术》

2008

激光熔凝处理对NiTi形状记忆合金微动磨损性能的影响

张春华，张卓，张松，韩忠，文效忠

《焊接学报》

2008

Fretting wear behavior of laser surface melted NiTi shape memory alloy

Chunhua Zhang, Zhuo Zhang, Song Zhang, Zhong Han, H.C. Man

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2007

激光熔覆技术的研究进展

李晓薇，张春华，张松，刘常升

《激光杂志》

2007

6061铝合金表面激光熔覆温度场的仿真模拟

张春华，张宁，张松，刘常升，Man H C

《沈阳工业大学学报》

2007

6061铝合金表面激光熔覆温度场的模拟与验证

张松，张春华，张宁，于莉丽，刘常升，Man H C

《焊接学报》

2007

Laser surface modification of titanium alloy used as biomaterial

Chun Hua Zhang, Song Zhang, Wang Qiang, H.C. Man, Chang Sheng Liu

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2007

Effect of laser gas nitriding for biological activities on NiTi alloy

Song Zhang, Chun Hua Zhang, Qiang Wang, H.C. Man, Chang Sheng Liu

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2006

激光表面改性对NiTi形状记忆合金腐蚀行为的影响

张松，王强，张春华，文效忠

《材料研究学报》

2006

H13钢表面激光熔覆NiFeBSi-Si3N4合金的组织及腐蚀性能

张春华，张松，张宁，H.C.Man

《金属热处理》

2006

Microstructure and electrochemical corrosion behavior of laser gladded NiFeBSi-Si3N4alloy on H13 steel surface

Chun Hua Zhang, Song Zhang, Ning Zhang, H.C. Man

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2006

Laser gas nitriding modified on NiTi shape memory alloy

Song Zhang, Chun Hua Zhang, Qiang Wang, H.C. Man, Chang Sheng Liu

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2005

6061Al合金表面激光熔覆Ni基合金的组织及性能

张春华，张松，文効忠，刘常升，才庆魁

《稀有金属材料与工程》

2005

NiTi合金表面激光原位反应合成TiN增强金属基复合材料涂层

张春华，张松，文效忠，刘常升，才庆魁

《复合材料学报》

2005

医用NiTi形状记忆合金表面改性

张春华，王强，张松，曾军

《金属热处理》

2005

NiTi形状记忆合金激光气体氮化层组织及磨损性能

张松，张春华，王强，文效忠，朱圣龙，才庆魁

《稀有金属材料与工程》

2005

热作模具钢表面激光熔覆StelliteX-40钴基合金

张春华，张松，李春彦，张希川，刘常升，才庆魁

《焊接学报》

2005

Microstructure and were performance of the laser gas nitrided NiTi shape memory alloy

Song Zhang, Chunhua Zhang, Qiang Wang, H.C. Man, Shenglong Zhu, Qingkui Cai

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2005

Microstructure and performance of a laser cladding of Ni-based alloy on 6061 aluminium alloy

Chunhua Zhang, Song Zhang, H.C. Man, Changsheng Liu, Qingkui Cai

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2005

Microstructure and wear-resistance of in-situ synthetic intermetallic compound modification coating formed on Al alloy substrate by laser alloying

Song Zhang, Chun Hua Zhang, H.C. Man, Chang Sheng Liu, Qing Cai

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2004

Laser gas nitriding of Ti6Al4V alloy

Chun Hua Zhang, Song Zhang, H.C. Man, Chang Sheng Liu, Qing Kui Cai

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2003

AA6061Al合金表面Si3N4激光熔覆层的空泡腐蚀性能

张松，张春华，文効忠，刘常升，吴维，王茂才

《中国激光》

2002

铝合金表面激光熔覆NiCrBSi的空泡腐蚀性能

张松，张春华，刘常升，文効忠

《稀有金属材料与工程》

2002

TiC/Ti复合材料激光熔覆层的冲击磨粒磨损性能

张松，张春华，张松，吴维(山文)，王茂才，张春华，刘常升，李诗卓，李曙

《金属学报》

2002

综述激光熔覆材料的若干问题

李春彦，张松，康煜平，刘常升

《激光杂志》

2002

铝合金表面激光熔覆SiC颗粒增强表层金属基复合材料的组织及空泡腐蚀性能

张松，张春华，张录廷，文効忠，吴维旻，王茂才

《材料工程》

2002

Cavitation Erosion Behaviour on Aluminium Alloy by Using Laser Surface Cladding of NiCrBSi

Song Zhang, Chunhua Zhang, Changsheng Liu, H.C. Man

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2001

激光熔覆钴基合金组织及其抗腐蚀性能

张松，张春华，孙泰礼，文効忠，吴维，王茂才

《中国激光》

2001

Ti6Al4V表面激光熔覆原位自生TiC颗粒增强钛基复合材料及摩擦磨损性能

张松，张春华，吴维，王茂才

《金属学报》

2001

2Cr13钢表面激光熔覆Co基合金组织及其性能

张松，张春华，文効忠，吴维，王茂才

《稀有金属材料与工程》

2001

铝合金表面激光熔覆原位自生TiC增强金属基复合材料涂层

张松，康煜平，文効忠，吴维，王茂才

《稀有金属材料与工程》

2001

钛合金表面激光熔覆原位生成TiC增强复合涂层

张松，张春华，康煜平，吴维山又，王茂才，文効忠

《中国有色金属学报》

2001

Mechanism of in-situ formation of TiC particle reinforced Ti-based composite coating induced by laser melting

Song Zhang, C.H. Zhang, Yuping Kang, Wei Wu, M. C. Wang, H.C. Man

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

2001

An in-situ formed TiC particle reinforcement composite coating induced by laser cladding on aluminium alloy

Song Zhang, Yuping Kang, H.C. Man, WU Weitao, Maocai Wang

PolyU Institutional Research Archive (Hong Kong Polytechnic University)

1999

多次辐照条件下YAG脉冲激光熔敷层开裂敏感性研究

张松，陈江，王茂才，吴维

《中国激光》

1999

激光熔覆TiC/Ti复合材料的组织及摩擦学性能

张松，王茂才，吴维，毕红运，李诗卓，李曙

《摩擦学学报(中英文)》

DOI

1992

钇对激光熔覆钴基合金组织和高温腐蚀性能的影响

张松，颜永根，朱荆璞，王茂才，吴维韬

《中国稀土学报》

研究方向

激光增材制造及再制造

此主页由公开资料整理，尚未经学者本人认领。