彭向和

期刊论文

1. 李传颖，付涛，彭向和（2026）. (HfNbTaTiZr)C高熵碳化物Σ5{310}[001]晶界的稳定性及对其力学行为的影响. 《物理学报》.
2. 沈绪，付涛，王世怡，胡浩，翁莎缘，彭向和（2026）. 复杂应力状态下单硼化铬的力学响应及微结构演化的第一性原理研究. 《物理学报》.
3. Chuan-Ying Li, Tao Fu, Hao Hu, Lanxi Feng, Xiaohu Yao, Xiang-He Peng (2026). Twin Boundary Energetics and Deformation: From Binary to High-Entropy Carbides. International Journal of Mechanical Sciences.DOI
4. Chuan-Ying Li, Tao Fu, Xiang-He Peng (2026). Stability of Σ5{310}[001]Grain Boundary in (HfNbTaTiZr)C High-Entropy Carbide and Its Implications for Mechanical Performance. Acta Physica Sinica.DOI
5. Xu Shen, Tao Fu, Shi-Yi Wang, Hao Hu, Sha-Yuan Weng, Xiang-He Peng (2026). First-principles study on the mechanical response and structural evolution of chromium monoboride under complex stress states. Acta Physica Sinica.DOI
6. Mengye Duan, Taozhi Tian, Sha-Yuan Weng, Lingbao Hu, Hao Hu, Xiang-He Peng, Tao Fu (2026). Effects of grain boundaries in nanocrystalline Ta and prediction of grain size-dependent critical strength. European Journal of Mechanics. A, Solids.DOI
7. Lingbao Hu, Sha-Yuan Weng, Hao Hu, Mengye Duan, Xiang-He Peng, Tao Fu (2026). Shear-induced boron-layer reconstruction and non-collinear slip in WB2. Extreme Mechanics Letters.DOI
8. Shi-Yi Wang, Tao Fu, Mengye Duan, Hao Hu, Xu Shen, Lingbao Hu, Sha-Yuan Weng, Xiang-He Peng (2026). Stacking fault stabilization and strengthening mechanisms in CoCrNi alloys. CrysteEngComm.DOI
9. Ziyu Chen, Haitao Li, Henggao Xiang, Xianghe Peng (2026). Microscopic mechanisms of Mn concentration gradients on the impact resistance of CoCrFeNiMn high-entropy alloys. Physica B Condensed Matter.DOI
10. Man Luo, Haitao Li, Shangwei Song, Henggao Xiang, Xianghe Peng (2026). Molecular dynamics simulation on irradiation damage and post-irradiation creep behavior of CoCrFeMnNi. Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms.DOI
11. Lingbao Hu, Shayuan Weng, Xianghe Peng, Tao Fu (2026). Boron-layer topology, bonding, and mechanical behavior in WB 2 polymorphs. Physical review. B./Physical review. B.DOI
12. Lingbao Hu, Tao Fu, Xu Shen, Chuan-Ying Li, Hao Hu, Shi-Yi Wang, De-Qiang Yin, Xiang-He Peng (2025). Normal Stress-Dependent Shear Behavior of Typical Cubic Covalent Crystals. Journal of Physical Chemistry C.DOI
13. Tao Fu, Chuan-Ying Li, Hao Hu, Mengye Duan, Sha-Yuan Weng, Xiang-He Peng (2025). Deformation modes of diamond using first-principles calculations: Uniform versus local deformation. Diamond and related materials.DOI
14. Chuan-Ying Li, Tao Fu, Hao Hu, Sha-Yuan Weng, Xiang-He Peng (2025). Two Negatives Make a Positive: Understanding Strength Insensitivity to Point Defects in (HfNbTaTiZr)C High-Entropy Carbide Ceramic. ACS Applied Materials and Interfaces.DOI
15. Taozhi Tian, Tao Fu, Mengye Duan, Hao Hu, Chuan-Ying Li, Xiang Chen, Xiang-He Peng (2025). Deformation behavior and yield strength prediction of [112] oriented NbMoTaW refractory high entropy alloy nanowires. CrysteEngComm.DOI
16. Xu Shen, Tao Fu, Chuan-Ying Li, Hao Hu, Shi-Yi Wang, Lingbao Hu, De-Qiang Yin, Xiang-He Peng (2025). Mechanical Behavior and Deformation Mechanisms of CrB 4 Subjected to Compressive-Shear Loadings. Journal of Physical Chemistry C.DOI
17. Tao Fu, Chuan-Ying Li, Xule Li, Hao Hu, Xiang-He Peng (2025). Effects of feature sizes on Cu/CoCrFeNi polycrystalline metallic multilayers. Journal of Materials Research and Technology.DOI
18. Ya-Li Xiao, Xianghe Peng (2024). Mechanical Responses and Deformation Mechanisms of Low-cost High-entropy Alloy AlCrFe2Ni2 with Heterogeneous Structure Subjected to High Strain Rate Deformation. International Journal of Applied Mechanics.DOI
19. Hao Hu, Tao Fu, Shi-Yi Wang, Chuan-Ying Li, Sha-Yuan Weng, De-Qiang Yin, Xiang-He Peng (2024). Multi-element Segregation Strengthening and Doping Softening of S5 (210) [001] Symmetrically Tilted Grain Boundary in Ni-based Bicrystal. International journal of plasticity.DOI
20. Zhi-Wen Bai, Tao Fu, Hao Hu, Wen-Shan Yu, Xiang-He Peng (2024). Automated identification of stacking faults and twin boundaries in face-centered cubic crystal. Computational materials science.DOI
21. Chuan-Ying Li, Tao Fu, Xu Shen, Hao Hu, Sha-Yuan Weng, De-Qiang Yin, Xiang-He Peng (2024). Mechanical response and grain boundary behavior of (HfNbTaTiZr)C high-entropy carbide ceramics and its constituent binary carbides. Surfaces and Interfaces.DOI
22. Yang Pan, Tao Fu, Mengye Duan, Chuan-Ying Li, Hao Hu, Xiang-He Peng (2024). Tension–Compression Asymmetry of BCC NbMoTaW in High Entropy Alloy Nanowires. ACS Applied Nano Materials.DOI
23. Tao Fu, Chuan-Ying Li, Hao Hu, Xiang-He Peng (2024). Mean field homogenization schemes using averages of stress, strain and strain energy density and applications. Mechanics of materials (Print).DOI
24. Fuli Guo, Chuan-Ying Li, Tao Fu, Xiang-He Peng (2024). Theoretical Prediction of Strengthening in Nanocrystalline Cu with Multi-Element Grain Boundary Segregation Decoration. Materials.DOI
25. Hao Hu, Tao Fu, Chuan-Ying Li, Mengye Duan, De-Qiang Yin, Sha-Yuan Weng, Xiang-He Peng (2024). Orientation-related and temperature-dependent continuous grain boundary migration in multi-principal element alloys. Mechanics of materials (Print).DOI
26. Menghan Yin, Mengye Duan, Tao Fu, Jie Wang, Sha-Yuan Weng, Xiangdong Chen, Xiang-He Peng (2024). Effects of heat treatment parameters and grain sizes on mechanical response of amorphous/crystalline CuZr composites. Mechanics of materials (Print).DOI
27. Shangwei Song, Haitao Li, Xianghe Peng (2024). Role of Fe/Mn elements tuning in the shock dynamics of CoCrNi-based alloy. International Journal of Mechanical Sciences.DOI
28. Chuanying Li, Tao Fu, Hao Hu, Mengye Duan, Shayuan Weng, Xianghe Peng (2024). Designing the mechanical behavior of (HfTiZr)1−x(NbTa)xC high-entropy carbide ceramics. Physical review. B./Physical review. B.DOI
29. Ya-Li Xiao, Xianghe Peng (2023). Design of lightweight Ti3Zr1.5NbV refractory high-entropy alloys with superior mechanical properties. Journal of Materials Research and Technology.DOI
30. Pinhui Lv, Richu Wang, C. Peng, Z. Cai, Yan Feng, Xianghe Peng (2023). The evolution of precipitates and mechanical properties in rapidly solidified 2195 Al–Cu–Li alloy during thermal exposure. Journal of Materials Research and Technology.DOI
31. Ya-Li Xiao, Xianghe Peng (2023). A refractory medium-entropy alloy with ultrahigh specific yield strengths for elevated-temperature applications. Applied Physics Letters.DOI
32. Chuan-Ying Li, Tao Fu, Xule Li, Hao Hu, Xiang-He Peng (2023). Reply to “Comment on ‘Effects of shear methods on shear strengths and deformation modes of two typical transition metal carbides and their unification’”. Physical review B.DOI
33. Xule Li, Tao Fu, Chuan-Ying Li, Hao Hu, Xiang-He Peng (2023). Effect of layer thickness on mechanical properties of Cu/CoCrFeNi nanolaminates: Implications from a quantitative flow stress model. Journal of Materials Research and Technology.DOI
34. Hao Hu, Tao Fu, Chuan-Ying Li, Xiang-He Peng (2023). Temperature- and internal structural size-dependent strength of nanotwinned face-centered cubic metals. Journal of Materials Research and Technology.DOI
35. Shangwei Song, Haitao Li, Peiwen Liu, Mengye Duan, Xianghe Peng (2023). Dynamic shock response of high-entropy alloy with elemental anomaly distribution. International Journal of Mechanical Sciences.DOI
36. Chuanying Li, Tao Fu, Xule Li, Hao Hu, Xianghe Peng (2023). Effects of shear methods on shear strengths and deformation modes of two typical transition metal carbides and their unification. Physical review. B./Physical review. B.DOI
37. Yake Xiao, Xiangpeng Chang, Xianghe Peng (2023). Achieving a balance between mechanical properties at room and elevated temperatures of lightweight NiAlFeCrMoV high-entropy alloy. International Journal of Refractory Metals and Hard Materials.DOI
38. Mengye Duan, Tao Fu, Yang Pan, Xuyang Liu, Xianghe Peng (2023). Stacking fault strengthening in CoCrFeMnNi high-entropy alloy. Applied Physics Letters.DOI
39. Yang Zhuang, Haitao Li, Shangwei Song, Xianghe Peng (2022). Mechanism analysis of the carrier viscosity effect on shear stress of magnetorheological fluids. Soft Matter.DOI
40. Yake Xiao, Xiangpeng Chang, Xianghe Peng (2022). Low-density NiAlFeCrMoV eutectic high-entropy alloys with excellent mechanical and wear properties. Journal of Materials Research and Technology.DOI
41. Mengru Zhang, Tao Fu, Zhouyu Fang, Shayuan Weng, Xianghe Peng (2022). Feature size coupling effect of nanolaminated graphene/copper composites. International Journal of Mechanical Sciences.DOI
42. Chuanying Li, Tao Fu, Hao Hu, Xianghe Peng (2022). Mechanical properties and their sensitivity to point defects: ( HfNbTaTiZr ) C high-entropy carbide. Physical review. B./Physical review. B.DOI
43. Yake Xiao, Xiangpeng Chang, Xianghe Peng, Tao Fu (2022). Heterogeneous structure induced excellent mechanical and wear properties in Co-free FeCrAlNi medium-entropy alloys. Journal of Materials Research and Technology.DOI
44. Yake Xiao, Xianghe Peng, Tao Fu (2022). L21-strengthened body-centered-cubic high-entropy alloy with excellent mechanical properties. Intermetallics.DOI
45. Qihao Liang, Shayuan Weng, Tao Fu, Sen Hu, Xianghe Peng (2022). Dislocation reaction-based formation mechanism of stacking fault tetrahedra in FCC high-entropy alloy. Materials Chemistry and Physics.DOI
46. Yake Xiao, Xianghe Peng, Tao Fu (2022). A novel high-entropy alloy with multi-scale precipitates and excellent mechanical properties fabricated by spark plasma sintering. Advanced Powder Technology.DOI
47. Zhiwen Bai, Tao Fu, Shayuan Weng, Yinbo Zhao, Xianghe Peng (2022). Deformation characteristics of nanolayered dual-phase CrCoNi medium-entropy alloy nanowires. Materials Today Communications.DOI
48. Hao Hu, Tao Fu, Chuanying Li, Shayuan Weng, Yinbo Zhao, Xiang Chen, Xianghe Peng (2022). Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins. Physical review. B./Physical review. B.DOI
49. Tao Fu, Hao Hu, Sen Hu, Qihao Liang, Shayuan Weng, Yinbo Zhao, Xiang Chen, Xianghe Peng (2022). Twin boundary migration and reactions with stacking fault tetrahedron in Cu and CoCrCuFeNi high-entropy alloy. Journal of Materials Research and Technology.DOI
50. Sen Hu, Tao Fu, Qihao Liang, Shayuan Weng, Xiang Chen, Yinbo Zhao, Xianghe Peng (2022). Formation and Anisotropic Mechanical Behavior of Stacking Fault Tetrahedron in Ni and CoCrFeNiMn High-Entropy Alloy. Frontiers in Materials.DOI
51. Wei Li, Xianghe Peng, Alfonso H.W. Ngan, Jaafar A. El‐Awady (2021). Surface energies and relaxation of NiCoCr and NiFe X ( X = Cu, Co or Cr) equiatomic multiprincipal element alloys from first principles calculations. Modelling and Simulation in Materials Science and Engineering.DOI
52. Shayuan Weng, Zhouyu Fang, Yinbo Zhao, Tao Fu, Xianghe Peng (2021). Molecular Dynamics Studies on Size Effects in Laminated Polycrystalline Graphene/Copper Composites: Implications for Mechanical Behavior. ACS Applied Nano Materials.DOI
53. Xiang Chen, Shayuan Weng, Yue Xing, Tao Fu, Xianghe Peng (2021). Effects of Anisotropy and In-Plane Grain Boundary in Cu/Pd Multilayered Films with Cube-on-Cube and Twinned Interface. Nanoscale Research Letters.DOI
54. 陈翔，陈伟，赵洋，禄盛，金晓清，彭向和（2020）. 考虑塑性变形和相变耦合效应的NiTiNb记忆合金管接头装配性能模拟. 《金属学报》.
55. Bo Yang, Xianghe Peng, Yinbo Zhao, Deqiang Yin, Tao Fu, Cheng Huang (2020). Superior mechanical and thermal properties than diamond: Diamond/lonsdaleite biphasic structure. Journal of Material Science and Technology.DOI
56. Xianghe Peng, Lu Li (2020). STATE OF THE ART OF CONSTITUTIVE RELATIONS OF HYPERELASTIC MATERIALS 1).DOI
57. Xiang Chen, Wei Chen, Ying Ma, Yang Zhao, Congying Deng, Xianghe Peng, Tao Fu (2020). Tension-Compression asymmetry of single-crystalline and nanocrystalline NiTi shape memory alloy: An atomic scale study. Mechanics of Materials.DOI
58. Shayuan Weng, Yue Xing, Tao Fu, Xiang Chen, Xuesong Long, Xianghe Peng (2020). Incipient plasticity and dislocation loop evolution in rock-salt vanadium nitride. Ceramics International.DOI
59. Zengrui Song, Xianghe Peng, Shan Tang, Tao Fu (2020). A homogenization scheme for elastoplastic composites using concept of Mori-Tanaka method and average deformation power rate density. International Journal of Plasticity.DOI
60. Shayuan Weng, Huiming Ning, Tao Fu, Ning Hu, Shu Wang, Kaiyan Huang, Xianghe Peng, Hang Jerry Qi, Cheng Yan (2019). Anisotropic and asymmetric deformation mechanisms of nanolaminated graphene/Cu composites. Nano Materials Science.DOI
61. Shayuan Weng, Xiang Chen, Yue Xing, Tao Fu, Xianghe Peng (2019). Inapparent Strengthening Effect of Twin Interface in Cu/Pd Multilayered Films with a Large Lattice Mismatch. Nanomaterials.DOI
62. Xuesong Long, Xianghe Peng, Tao Fu (2019). Extension of micromechanics model and micro-macro description to shape memory effect of NiTi SMAs. International Journal of Solids and Structures.DOI
63. Shayuan Weng, Tao Fu, Xianghe Peng, Xiang Chen (2019). Anisotropic Phase Transformation in B2 Crystalline CuZr Alloy. Nanoscale Research Letters.DOI
64. Bo Yang, Xianghe Peng, Sha Sun, Cheng Huang, Deqiang Yin, Xiang Chen, Tao Fu (2019). Detwinning Mechanism for Nanotwinned Cubic Boron Nitride with Unprecedented Strength: A First-Principles Study. Nanomaterials.DOI
65. 付涛，彭向和，黄橙，杨波，赵胤伯（2018）. 纳晶氮化钒尺寸效应的分子动力学模拟研究. 《2018年全国固体力学学术会议摘要集（上）》.
66. 杨波，彭向和，黄橙，尹德强，付涛（2018）. 纳米孪晶金刚石强韧化机理研究. 《2018年全国固体力学学术会议摘要集（上）》.
67. 黄橙，彭向和，付涛，杨波（2018）. 孪晶立方氮化硼在纳米压痕下的力学特性与微观机理研究. 《2018年全国固体力学学术会议摘要集（上）》.
68. 陈翔，陈伟，马莹，付涛，金晓清，彭向和（2018）. 热力耦合作用下形状记忆合金管接头装配特性的数值模拟研究. 《2018年全国固体力学学术会议摘要集（下）》.
69. 黄春阳，唐山，彭向和（2017）. 超弹性薄膜与可压缩基底双层结构表面失稳分析. 《力学学报》.
70. 王新筑，周雄，朱炳杰，彭向和（2017）. 金属泡沫复合材料夹芯结构的压痕响应实验. 《国防科技大学学报》.
71. 赵胤伯，黄橙，罗龙京，冯超，李腾飞，付涛，彭向和（2017）. 硬质陶瓷薄膜涂层力学特性研究进展. 《固体力学学报》.
72. Xiang Chen, Sheng Fu Lu, Yang Zhao, Tao Fu, Cheng Huang, Xianghe Peng (2017). Molecular dynamic simulation on nano-indentation of NiTi SMA. Materials Science and Engineering A.DOI
73. Yinbo Zhao, Cheng Huang, Longjing Luo, Chao Qing Feng, Tengfei Li, Tao Fu, Xianghe Peng (2017). Progress in study of mechanical properties of hard ceramics thin film coatings.
74. 唐山，郭田福，彭向和（2016）. 压力敏感材料中的空洞长大研究及其在页岩及高分子材料中的应用（英文）. 《计算力学学报》.
75. 郑恒伟，彭向和，丁剑平，田祖安（2016）. 陶瓷颗粒增强复合材料细观力学模型. 《中国陶瓷》.
76. 李期斌，唐启忠，刘朝，彭铁锋，张晓敏，彭向和，黄橙，付涛，赵胤伯，冯超（2016）. 铜/金纳米涂层在温度梯度下的分子动力学模拟. 《工程热物理学报》.
77. 郑恒伟，彭向和，田祖安，郑安节（2016）. 陶瓷增强功能梯度材料等效特性细观力学模型发展与分析. 《中国陶瓷》.
78. 王新筑，周雄，朱炳杰，彭向和（2016）. 金属泡沫断裂韧性的试验研究. 《国防科技大学学报》.
79. Xuesong Long, Xianghe Peng, Tao Fu, S. Tang, Ning Hu (2016). A micro-macro description for pseudoelasticity of NiTi SMAs subjected to nonproportional deformations. International Journal of Plasticity.DOI
80. Hengwei Zheng, Xianghe Peng, Kaizhi Huang, Anjie Zheng (2016). Research on shakedown analysis for functionally graded material plate under thermomechanical loading. Journal of Thermal Stresses.DOI
81. 韩佳，彭向和，陈翔，陈斌（2015）. 一种修正的形状记忆合金本构模型数值算法及应用. 《应用力学学报》.
82. 杨昌棋，魏榛，马树明，周子源，陈校生，彭向和（2015）. 新型超高温陶瓷力学性能测试系统的开发. 《中国力学大会-2015》.
83. Xianghe Peng, Shan Tang, Ning Hu, Jing Tao Han (2015). Determination of the Eshelby tensor in mean-field schemes for evaluation of mechanical properties of elastoplastic composites. International Journal of Plasticity.DOI
84. Shan Tang, Ying Li, Wing Kam Liu, Ning Hu, Xianghe Peng, Zaoyang Guo (2015). Tensile Stress-Driven Surface Wrinkles on Cylindrical Core–Shell Soft Solids. Journal of Applied Mechanics.DOI
85. Shan Tang, Steven M. Greene, Wing Kam Liu, Xianghe Peng, Zaoyang Guo (2015). Variable Chain Confinement in Polymers With Nanosized Pores and Its Impact on Instability. Journal of Applied Mechanics.DOI
86. Chen Xiang, Xianghe Peng, Bin Chen, Jia Han, Zhongmin Zeng, Ning Hu (2015). Experimental investigation on transformation, reorientation and plasticity of Ni47Ti44Nb9SMA under biaxial thermal–mechanical loading. Smart Materials and Structures.DOI
87. Shan Tang, Yang Yang, Xianghe Peng, Wing Kam Liu, Xiaoxu Huang, Khalil I. Elkhodary (2015). A semi-numerical algorithm for instability of compressible multilayered structures. Computational Mechanics.DOI
88. 唐山，李颖，Wing Kam Liu，彭向和，郭早阳（2014）. 空洞高分子材料屈曲的分子链约束效应的计算研究. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
89. 曾忠敏，彭向和（2014）. 计及相变与塑性的NiTi形状记忆合金循环伪弹性特性描述. 《应用数学和力学》.
90. 赵春伟，彭向和，史旭东（2014）. 磁流变液微结构的实验观测. 《功能材料》.
91. Ziyuan Zhou, Xianghe Peng, Zhen Wei (2014). A Thermo‐Chemo‐Mechanical Model for the Oxidation of Zirconium Diboride. Journal of the American Ceramic Society.DOI
92. Deqiang Yin, Yi Yang, Xianghe Peng, Yi Qin, Zhongchang Wang (2014). Tensile and fracture process of the TiN/VN interface from first principles. Ceramics International.DOI
93. Huiming Ning, Yuan Li, Ning Hu, Yanping Cao, Cheng Yan, Takesi Azuma, Xianghe Peng, Liangke Wu, Jinhua Li, Leilei Li (2014). Improvement of the mode II interface fracture toughness of glass fiber reinforced plastics/aluminum laminates through vapor grown carbon fiber interleaves. Science and Technology of Advanced Materials.DOI
94. Bin Hu, Ning Hu, Leilei Li, Weiguo Li, Shan Tang, Yuan Li, Xianghe Peng, Atsushi Homma, Yaolu Liu, Liangke Wu, Huiming Ning (2014). Tomographic reconstruction of damage images in hollow cylinders using Lamb waves. Ultrasonics.DOI
95. Deqiang Yin, Yi Yang, Xianghe Peng, Yi Qin, Zhongchang Wang (2014). Microstructure and mechanical property of TiN/AlN multilayered coatings: The impact of AlN thickness. Physica E Low-dimensional Systems and Nanostructures.DOI
96. Xiang Chen, Xianghe Peng, Bin Chen, Jia Han, Zhongmin Zeng, Ning Hu (2014). Experimental investigation to thermal–mechanical behavior of Ni47Ti44Nb9 SMA under pure tension and pure torsion. Journal of Alloys and Compounds.DOI
97. Shan Tang, M. Steven Greene, Xianghe Peng, Wing Kam Liu, Zao Yang Guo (2014). Chain confinement drives the mechanical properties of nanoporous polymers. Europhysics Letters (EPL).DOI
98. JunPing Huang, Xianghe Peng, Xianzhi Hu (2014). The first principles investigation of ferrite magnetic response with mismatch stress. Science China Physics Mechanics and Astronomy.DOI
99. Weiguo Li, Xueliang Shen, Xianghe Peng (2014). A Constitutive Description for Shape Memory Alloys with the Growth of Martensite Band. Materials.DOI
100. Zaoyang Guo, Haitao Li, Qiang Wan, Xianghe Peng, Jing A. Wen (2014). A Model to Describe the Magnetomechanical Behavior of Martensite in Magnetic Shape Memory Alloy. Advances in Condensed Matter Physics.DOI
101. Tingyi Xu, Xianghe Peng, Junlian Jiang, Xiaoxing Zhang, Guobing Wei (2014). Microstructure and mechanical properties of Mg–Li–Al based alloy with yttrium addition. Materials Research Innovations.DOI
102. 彭向和（2013）. 一种基于微结构损伤的尺度效应分析方法. 《中国力学大会——2013论文摘要集》.
103. 彭向和（2013）. 基于自洽和Mori-Tanaka混合方法的颗粒增强复合材料有效特性分析(英文). 《重庆大学2013复合材料力学研讨会摘要集》.
104. 孙虎，彭向和，李海涛，赵春伟（2013）. 基于Maxwell-Rivlin-Ericksen理论的MRM本构关系的算法探究. 《计算力学学报》.
105. 王新筑，彭向和，郭早阳（2013）. 泡沫铝准静态压痕响应的数值模拟. 《机械工程材料》.
106. Tiger Sun, Xianghe Peng, Chao Feng, Haitao Li (2013). Investigation of improving life of cable-stayed bridge with the magnetorheogical damper. 13th International Conference on Fracture（ICF13）.
107. Xinzhu Wang, Xianghe Peng, Zaoyang Guo (2013). Investigation on fracture toughness of Al foam. 13th International Conference on Fracture（ICF13） Abstract Book.
108. Xianghe Peng, Ning Hu, Xuesong Long, Hengwei Zheng (2013). Extension of combined self-consistent and Mori-Tanaka approach to evaluation of elastoplastic property of particulate composites. Acta Mechanica Solida Sinica.DOI
109. Tiger Sun, Xianghe Peng, Jingzhi Li, Chao Qing Feng (2013). Testing device and experimental investigation to influencing factors of Magnetorheological fluid. International Journal of Applied Electromagnetics and Mechanics.DOI
110. Tiger Sun, Shu Ping Jiao, Xianghe Peng, Chang Xing Xu, Jing Zhi Li (2013). Mechanics Modeling upon Nano-MRM for Treatment of Intracranial Aneurysm. Advanced materials research.DOI
111. Xianghe Peng, Min Mei Chen, Jun Wang (2013). A Constitutive Model for Shape Memory Alloys Involving Transformation, Reorientation and Plasticity. Key engineering materials.DOI
112. Alamusi Alamusi, Yuan Li, Ning Hu, Liangke Wu, Weifeng Yuan, Xianghe Peng, Bin Gu, Christiana Chang, Yaolu Liu, Huiming Ning, Jinhua Li, Surina, Satoshi Atobe, Hisao Fukunaga (2013). Temperature-dependent piezoresistivity in an MWCNT/epoxy nanocomposite temperature sensor with ultrahigh performance. Nanotechnology.DOI
113. 陈斌，彭向和，王军，王沪毅（2012）. 形状记忆合金单晶细观本构关系的一种相变动力学模型及算法. 《固体力学学报》.
114. 赵春伟，彭向和（2012）. 基于有限元计算的磁流变液特性分析及其与基于磁偶极子模型结果的比较. 《功能材料》.
115. Chunwei Zhao, Xianghe Peng (2012). A micro-macro description for magnetorheological fluids based on enhanced magnetic dipole model. 23rd International Congress of Theoretical and Applied Mechanics.
116. Xinzhu Wang, Xianghe Peng, Zaoyang Guo (2012). Quasi-static indentation tests on closed-cell Al foam. Abstract Book of 23rd International Congress of Theoretical and Applied Mechanics.
117. Hu Sun, Tiger Sun, Shu Ping Jiao, Chang Xing Xu, Xianghe Peng (2012). Manufacture and Research on a Kind of Double-Channel MRFs Testing Equipment. Advanced materials research.DOI
118. Linwei Cao, Xianghe Peng, Wanbin Zhang (2012). A Micromechanics-Based Model for the Effect of Coupled Damage and Pore Pressure in Rock-Like Materials under Triaxial Tension.DOI
119. Ning Hu, Jinhua Li, Yindi Cai, Cheng Yan, Yajun Zhang, Jinghao Qiu, Kanako Sakai, Yaolu Liu, Xianghe Peng, Bo Yan (2012). Locating Delamination in Composite Laminated Beams Using the A0Lamb Mode. Mechanics of Advanced Materials and Structures.DOI
120. Xianghe Peng, Bin Chen, Xiang Chen, Jun Wang, Huyi Wang (2012). A constitutive model for transformation, reorientation and plastic deformation of shape memory alloys. Acta Mechanica Solida Sinica.DOI
121. Deqiang Yin, Xianghe Peng, Yi Qin, Zhongchang Wang (2012). Impact of residual stress on the adhesion and tensile fracture of TiN/CrN multi-layered coatings from first principles. Physica E Low-dimensional Systems and Nanostructures.DOI
122. Haitao Li, Xianghe Peng (2012). Simulation for the Microstructure and Rheology in Bidisperse Magnetorheological Fluids. Journal of Computers.DOI
123. Deqiang Yin, Xianghe Peng, Yi Qin, Zhongchang Wang (2012). Adhesion, atomic structure, and bonding variation at TiN/VN interface by chemical segregation. Surface and Interface Analysis.DOI
124. Hu Sun, Xianghe Peng (2012). Magnetorheological Materials Theory United in Energy. Applied Mechanics and Materials.DOI
125. 易成建，彭向和，孙虎（2011）. 基于有限元方法的磁流变液微结构磁化及宏观力学特性分析. 《功能材料》.
126. 彭向和，陈斌，王军，王沪毅（2011）. 计及重取向与塑性变形的SMA本构模型. 《塑性力学新进展——2011年全国塑性力学会议论文集》.
127. 尹林茂，范智超，孟媛，易成建，彭向和（2011）. 静磁场下磁流变液微结构演化的实验研究. 《西南大学学报(自然科学版)》.
128. 李海涛，彭向和（2011）. 杆形颗粒磁流变液的剪切屈服应力模型. 《功能材料》.
129. 熊晨熙，彭向和，易成建（2011）. 采用油酸和月桂酸改进磁流变液稳定性的实验研究. 《功能材料》.
130. Ning Hu, Xianghe Peng, Yuan Li, Senyuan Liu, Y. Liu (2011). Interfacial Property in Nano-materials due to Van Der Waals and Electrostatic Coulombic Interactions.
131. Deqiang Yin, Xianghe Peng, Yi Qin, Jiling Feng, Zhongchang Wang (2011). Quantifying adhesion energy of mechanical coatings at atomistic scale. Applied Surface Science.DOI
132. Wei Guo Li, Xianghe Peng, Wenli Pi (2011). A Constitutive Description for Shape Memory Alloys with Phase Transformation Microstructure. Applied Mechanics and Materials.DOI
133. Deqiang Yin, Xianghe Peng, Yi Qin, Zhongchang Wang (2011). PREDICTION OF RESIDUAL STRESS IN MULTILAYERED COATINGS WITH A LINEARLY ELASTIC MODEL INCORPORATING DENSITY FUNCTIONAL THEORY CALCULATIONS. Journal of Multiscale Modelling.DOI
134. Haitao Li, Xianghe Peng (2011). Study on Microstructure and Mechanical Behavior of Magnetorheological Fluids with Mixed Particles. Advanced materials research.DOI
135. Haitao Li, Xianghe Peng (2011). Conventional Plasticity Constitutive Model for Shape Memory Alloys. Advanced materials research.DOI
136. Xianghe Peng (2011). Experimental Investigation of the Evolution of Microstructure in Magnetorheological Fluids under a Static Magnetic Field. Journal of Southwest University.
137. Xianghe Peng (2011). Research of Load Cell with Low-Torque/High-Tensile Traction. Chuangan jishu xuebao.
138. Yuan Li, Yaolu Liu, Xianghe Peng, Cheng Yan, Sen Liu, Ning Hu (2011). Pull-out simulations on interfacial properties of carbon nanotube-reinforced polymer nanocomposites. Computational Materials Science.DOI
139. 曹林卫，彭向和，任中俊，杨春和，李银平（2010）. 三轴压缩下层状盐岩体细观损伤本构模型. 《岩石力学与工程学报》.
140. 李海涛，彭向和，易成建（2010）. 附着颗粒对磁流变液偶极子链力学特性的影响. 《重庆大学学报》.
141. 李海涛，彭向和（2010）. 磁流变液铁磁颗粒的动力学分析. 《重庆大学学报》.
142. 易成建，彭向和，贾延杰，李海涛（2010）. 基于OpenMP的磁流变液并行数值模拟. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）论文集》.
143. 曹林卫，彭向和，杨春和（2010）. 基于屈服接近度概念的尾矿坝静力稳定性分析及其与强度折减系数法的对比. 《西安建筑科技大学学报(自然科学版)》.
144. 黄均平，彭向和（2010）. 基于能量统一格式的多尺度有限元法. 《计算机辅助工程》.
145. Deqiang Yin, Xianghe Peng, Yi Qin, Zhongchang Wang (2010). Electronic property and bonding configuration at the TiN(111)/VN(111) interface. Journal of Applied Physics.DOI
146. YI Cheng-jian, Xianghe Peng, Chunwei Zhao (2010). A magnetic-dipoles-based micro–macro constitutive model for MRFs subjected to shear deformation. Rheologica Acta.DOI
147. Xianghe Peng, Wenli Pi, Jing Hong Fan (2010). A Microstructure-Damage-Based Description for the Size Effect of the Constitutive Behavior of Pearlitic Steels. International Journal of Damage Mechanics.DOI
148. Xianghe Peng (2010). Dynamic analysis on ferromagnetic particles of magnetorheological fluids. Journal of Chongqing University. English Edition.
149. 陈斌，袁权，彭向和，范镜泓（2009）. 胫骨生物陶瓷复合材料的微结构增韧机理. 《稀有金属材料与工程》.
150. 万玲，彭向和，郭开元，吴剑（2009）. 泥岩蠕变行为试验研究. 《2009年度海峡两岸工程力学研讨会论文集》.
151. 彭向和，胡宁，龙血松（2009）. 颗粒增强复合材料有效性质分析的自洽和Mori-Tanaka混合方法. 《现代数学和力学(MMM-XI)：第十一届全国现代数学和力学学术会议论文集》.
152. 陈斌，孙士涛，彭向和，范镜泓（2009）. 文哈贝壳多级微结构特征及螺旋交叉微结构的韧性机制. 《稀有金属材料与工程》.
153. 任中俊，彭向和，胡宁，刘小会（2009）. 深埋椭圆形片状裂纹的偏折扩展. 《力学学报》.
154. 任中俊，彭向和，胡宁，杨春和（2009）. 三轴压缩下岩石/混凝土的三维细观损伤模型. 《应用数学和力学》.
155. 陈斌，彭向和，范镜泓，孙士涛，罗吉（2009）. 考虑相变的热弹塑性本构方程及其应用. 《物理学报》.
156. 陈斌，彭向和，孙士涛，权国政，罗吉（2009）. 基于孔洞体胞模型铸造镁合金ML308的本构方程. 《物理学报》.
157. Ning Hu, Y. Liu, Yuanli LI, Xianghe Peng, Bo Yan (2009). Optimal Excitation Frequency of Lamb Waves for Delamination Detection in CFRP Laminates. Journal of Composite Materials.DOI
158. Xianghe Peng, Ning Hu, Huimin Zheng, H. Fukunaga (2009). Evaluation of mechanical properties of particulate composites with a combined self-consistent and Mori–Tanaka approach. Mechanics of Materials.DOI
159. Xianghe Peng, Hengwei Zheng, Ning Hu, Chenhao Fang (2009). Static and kinematic shakedown analysis of FG plate subjected to constant mechanical load and cyclically varying temperature change. Composite Structures.DOI
160. Xianghe Peng, Ning Hu, Hengwei Zheng, Chenhao Fang (2009). Analysis of shakedown of FG bree plate subjected to coupled thermal-mechanical loadings. Acta Mechanica Solida Sinica.DOI
161. Bin Chen, Xianghe Peng, Shi Tao Sun, Ji Rong Luo (2009). Microstructure and Toughness Mechanism of Shank Bone. Materials science forum.DOI
162. Bin Chen, Shi Tao Sun, Xianghe Peng (2009). Toughness Analysis of Cannon Bone Based on Microstructural Model. Materials science forum.DOI
163. 陈斌，彭向和，孙士涛，季金苟，陈松（2008）. 胫骨羟基磷灰石片交叉微结构研究. 《稀有金属材料与工程》.
164. 陈斌，彭向和，孙士涛，季金苟，陈松（2008）. 丽文哈贝壳螺旋微结构研究. 《稀有金属材料与工程》.
165. 张晓敏，严波，彭向和，张培源（2008）. 偶应力理论的等效量定义. 《应用力学学报》.
166. 张晓敏，彭向和，张培源（2008）. 温度梯度介质的偶应力理论——多相固体混合物的热失配. 《应用力学学报》.
167. 任中俊，彭向和，万玲，杨春和（2008）. 三轴加载下盐岩蠕变损伤特性的研究. 《应用力学学报》.
168. 易成建，彭向和，李海涛（2008）. 静磁场下磁流变液微结构形态稳定性分析. 《功能材料》.
169. 李海涛，彭向和，黄尚廉（2008）. 基于偶极子理论的磁流变液链化机理模拟研究. 《功能材料》.
170. 陈斌，孙士涛，彭向和（2008）. 胫骨羟基磷灰石片平行纳米结构. 《功能材料与器件学报》.
171. 陈斌，孙士涛，彭向和（2008）. 蛤蜊贝壳霰石片纤维交错纳米结构. 《功能材料与器件学报》.
172. Bin Chen, Xianghe Peng, Jinghong Fan, Shitao Sun (2008). Constitutive model for casting magnesium alloy involving spherical void evolution. Transactions of Nonferrous Metals Society of China.DOI
173. 陈斌，孙士涛，权国政，彭向和（2008）. 蛤蜊贝壳交叉铺层微结构研究. 《第十五届全国高技术陶瓷学术年会摘要集》.
174. 孙士涛，陈斌，权国政，彭向和（2008）. 胫骨螺旋微结构研究. 《第十五届全国高技术陶瓷学术年会摘要集》.
175. Bin Chen, Shi Tao Sun, Xianghe Peng (2008). Hydroxyapatite-Sheet Microstructure of Shinbone. Key engineering materials.DOI
176. Bin Chen, Shi Tao Sun, Xianghe Peng, Jinghong Fan (2008). Investigation on Screwy Microstructure of Solid-Trough Shell. Key engineering materials.DOI
177. Jian Qiang Zhou, Xianghe Peng, Yi Qin (2008). A coupled thermal–mechanical analysis of a mold-billet system during continuous casting. The International Journal of Advanced Manufacturing Technology.DOI
178. Zhongjun Ren, Xianghe Peng, Chunhe Yang (2008). Micromechanical Damage Model for Rocks and Concretes Subjected to Coupled Tensile and Shear Stresses. Acta Mechanica Solida Sinica.DOI
179. Bin Chen, Xianghe Peng, Shitao Sun, Jinghong Fan (2008). Hydroxyapatite-Sheet Parallel Microstructure of Shinbone. Journal of Bionic Engineering.DOI
180. Bin Chen, Xianghe Peng, J. H. Fan, Shitao Sun (2008). Lambdoidal Reinforced Microstructure of Mactridae Shell. Key engineering materials.DOI
181. Bin Chen, Xianghe Peng, Shi Tao Sun (2008). Enhanced Mechanism of Fracture Toughness in Cannon Bone. Key engineering materials.DOI
182. Xuesong Long, Xianghe Peng, Wenli Pi (2008). A microstructure-based analysis of cyclic plasticity of pearlitic steels with Hill’s self-consistent scheme incorporating general anisotropic Eshelby tensor. Acta Mechanica Sinica.DOI
183. Bin Chen, Xianghe Peng, Shitao Sun (2008). Investigation to nano corkscrew structure in Lucanidae cuticle. IEEE International Conference on Nano/Micro Engineered and Molecular Systems.DOI
184. Xianghe Peng (2008). Intersectant nanostructure of clam's shell. Gongneng cailiao yu qijian xuebao.
185. Xianghe Peng (2008). Parallel nanostructure of a shankbone. Gongneng cailiao yu qijian xuebao.
186. Bin Chen, Xianghe Peng, Shitao Sun (2008). Investigation to the nano crossed structure of Chamidae shell. IEEE International Conference on Nano/Micro Engineered and Molecular Systems.DOI
187. 陈斌，蒋晓梅，孙士涛，彭向和（2007）. 胫骨的层状微结构研究. 《稀有金属材料与工程》.
188. 黄均平，彭向和（2007）. 基于内时大变形弹塑性本构模型的镦粗热力耦合分析. 《固体力学学报》.
189. 陈斌，彭向和，范镜泓（2007）. 金龟子壳几丁质纤维增强微结构及分叉纤维的研究. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
190. 李卫国，彭向和，方岱宁，皮文丽（2007）. 计及相变微结构演化的形状记忆合金本构描述. 《固体力学学报》.
191. 陈斌，吴晓金，吴新燕，彭向和，范镜泓（2007）. 贝壳的层状微结构与仿生陶瓷/聚合物复合材料的研究. 《全国首届青年复合材料学术交流会论文集》.
192. 皮文丽，彭向和（2007）. 基于微结构损伤的珠光体材料本构行为研究. 《力学学报》.
193. 彭向和，皮文丽（2007）. 基于微结构损伤的珠光体钢特性及尺度效应描述. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（上）》.
194. 曹林卫，彭向和，李晓红，杨春和（2007）. 脉冲水射流破岩的数值模拟研究. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
195. 周家勇，彭向和（2007）. 板坯连铸过程包含相变的三维瞬态热传导数值模拟. 《材料与冶金学报》.
196. 曹林卫，彭向和，李德，吕振江，高翔（2007）. 变形场和渗流场耦合作用下的尾矿坝静力稳定性分析. 《土木与环境工程学报(中英文)》.
197. 陈斌，彭向和，范镜泓，孙士涛 (2007). Effect of heating-rate on failure temperature of pre-loaded brass H62. Transactions of Nonferrous Metals Society of China.
198. 陈斌，彭向和，范镜泓，孙士涛 (2007). Nonclassical constitutive model involving void evolution of casting magnesium alloy. Transactions of Nonferrous Metals Society of China.
199. B. Chen, Xianghe Peng, Jing Hong Fan, Shi Tao Sun (2007). A viscous-elastoplastic constitutive equation incorporating phase transformation with the application to the residual stress analysis for welding process. Journal of Materials Processing Technology.DOI
200. Bin Chen, Xianghe Peng, Shi Tao Sun (2007). Research on the Curving Aragonite Sheets in Clam’s Shell. Key engineering materials.DOI
201. Bin Chen, Xianghe Peng, Shi Tao Sun (2007). Investigation to the Cross Microstructure of Hydroxyapatite Sheets of a Cannon Bone. Key engineering materials.DOI
202. Bin Chen, Xianghe Peng, Shitao Sun (2007). Investigation to isogonic nano-chitin-fiber structure in Lucanidae cuticle. IEEE Conference on Nanotechnology (IEEE NANO).DOI
203. Xiang Guo Zeng, Qing Wang, Jing Hong Fan, Zhan Hua Gao, Xianghe Peng (2007). A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application. Materials science forum.DOI
204. Bin Chen, Xianghe Peng, Xin Wu (2007). Lambdoidal Layup of Aragonite Sheets in Conch Shell. Key engineering materials.DOI
205. Bin Chen, Xianghe Peng, Jinghong Fan (2007). Research of the Herringbone Microstructure of Rufescens’s Shell. Key engineering materials.DOI
206. Bin Chen, Xianghe Peng, Xin Wu (2007). Sheet-Layer Microstructure and Toughness Mechanism of Shinbone. Key engineering materials.DOI
207. Bin Chen, Xianghe Peng, Jinghong Fan (2007). Observation on Hydrophilidae Cuticle and Analysis of Maximum Pullout Force of Branched Fiber. Key engineering materials.DOI
208. B. Chen, Xiaoyong Wu, Xianghe Peng (2007). Finite element analysis of ring strain sensor. Sensors and Actuators A Physical.DOI
209. Hu Si, Xianghe Peng, Xiaohua Li (2007). A Micromechanical Model for Magnetorheological Fluids. Journal of Intelligent Material Systems and Structures.DOI
210. Bin Chen, Xin Wu, Xianghe Peng (2007). Research on the Layered Microstructure of Shankbone. Key engineering materials.DOI
211. Bin Chen, Xianghe Peng, Xin Wu (2007). Research of Herringbone Structure of Fragum Unedo Shell. Key engineering materials.DOI
212. Xianghe Peng (2007). Three-dimensional numerical simulation of transient heat transfer with phase change during continuous casting process of slab. Cailiao yu yejin xuebao.
213. Bin Chen, Xianghe Peng, Shitao Sun (2007). Investigation to the herringbone nano-aragonite-sheet microstructure of Chamidae shell. IEEE Conference on Nanotechnology (IEEE NANO).DOI
214. 张晓敏，彭向和（2006）. 热力耦合问题的本构方程. 《重庆大学学报》.
215. 曾祥国，李建军，郑恒伟，李渊，范镜泓，彭向和（2006）. 镁合金AM50断裂力学参量的有限元计算和验证. 《重庆大学学报》.
216. 龙血松，彭向和（2006）. 结晶器铜板温度及变形场的有限元分析. 《钢铁》.
217. 尹益辉，陈裕泽，彭向和（2006）. 金属力学性能的温升率效应研究概述. 《强激光与粒子束》.
218. 李卫国，彭向和（2006）. 考虑微缺陷形状的细片层状珠光体钢的损伤本构模型. 《应用力学学报》.
219. 杨磊，彭向和，李卫国（2006）. 镁合金塑性-蠕变交互作用的损伤本构模型. 《重庆大学学报》.
220. 李海涛，彭向和，陈伟民（2006）. 磁流变液流变特性的数值模拟分析. 《功能材料》.
221. 周家勇，彭向和，苏鹤州，王远，龙血松（2006）. 板坯连铸结晶器冷却铜板的温度场分析及结构优化. 《中国冶金》.
222. 陈斌，彭向和，曾祥国，吴新燕，孙士涛 (2006). Constitutive description of casting aluminum alloy based on cylindrical void-cell model. Transactions of Nonferrous Metals Society of China.
223. 张晓敏，彭向和，张培源（2006）. 热力藕合问题的交替算法. 《爆炸与冲击》.
224. Xianghe Peng, Yi Qin, R. Balendra (2006). A numerical investigation to the strategies of the localised heating for micro-part stamping. International Journal of Mechanical Sciences.DOI
225. Bin Chen, Xianghe Peng, Congzhong Cai, Q. Dong (2006). Research on the Hybrid Fiber-Reinforced Microstructure of Chafer Cuticle. Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena.DOI
226. B. Chen, Xianghe Peng, Congzhong Cai, J. H. Fan, Xin Wu (2006). Circumcolumnar microstructure of Tumblebug cuticle and biomimetic application. Materials Science and Engineering B.DOI
227. B. Chen, Xianghe Peng, Congzhong Cai, Hongwei Niu, Xin Wu (2006). Helicoidal microstructure of Scarabaei cuticle and biomimetic research. Materials Science and Engineering A.DOI
228. Bohao Chen, Xianghe Peng, Jing Hong Fan, Shuo Chen (2006). An elastoplastic constitutive description based on an ellipsoidal void model. Materials Science and Engineering A.DOI
229. Xianghe Peng (2006). Constitutive Equations for Thermo-mechanical Coupling Problems. Journal of Chongqing University. English Edition.
230. Bin Chen, Xianghe Peng (2006). Research of Helicoidal Layup of Clam Shell. JSME International Journal Series C.DOI
231. Xianghe Peng (2006). FEM Analysis of Thermal and Deformation Fields in Mould Copper. Ironmaking & Steelmaking Processes Products and Applications.
232. 万玲，彭向和，杨春和，郭开元（2005）. 泥岩蠕变行为的实验研究及其描述. 《岩土力学》.
233. 司鹄，彭向和，陈伟民（2005）. 分析磁流变流体屈服应力微观力学模型. 《应用力学学报》.
234. 彭向和，杨运民，陈裕泽，尹益辉（2005）. 高温升率下LY12铝合金拉伸破坏及其机理的研究. 《固体力学学报》.
235. 李卫国，彭向和，皮文丽（2005）. 细片层状微结构珠光体材料损伤本构关系. 《重庆大学学报》.
236. 张晓敏，张培源，彭向和（2005）. 三相有限延迟型非Fourier介质热力耦合传播模式和群速度. 《应用力学学报》.
237. 彭向和，李海涛（2005）. 从微观到宏观:磁流变液响应特性的数值模拟. 《中国力学学会学术大会'2005论文摘要集（上）》.
238. 李卫国，彭向和（2005）. 具有片层状结构珠光体团的有限元分析. 《重庆大学学报》.
239. 黄均平，彭向和，秦义（2005）. 基于内时大变形弹塑性本构模型的回弹和二次屈服分析. 《应用力学学报》.
240. 李海涛，彭向和，陈伟民（2005）. 基于链化分析的磁流变液剪切屈服应力模型. Chinese Journal of Chemical Physics.
241. Xianghe Peng, H. Li, W. Chen (2005). A comprehensive description for shape memory alloys with a two-phase mixture model incorporating the conventional theory of plasticity.DOI
242. Xianghe Peng, Xiaoxing Zhang, Jing Hong Fan, B. Chen (2005). Effect of heating-rate on the thermomechanical behavior of aluminum alloy LY12 and a phenomenological description. International Journal of Solids and Structures.DOI
243. Xianghe Peng, Yawei Qin, X. Zhang (2005). A constitutive model for the metals subjected to thermomechanical loading with fast heating during heating-assisted forming. Journal of Materials Processing Technology.DOI
244. B. Chen, Xianghe Peng, Jing Hong Fan, Shuo Chen (2005). A constitutive description for casting aluminum alloy A104 based on the analysis of cylindrical and spherical void models. International Journal of Plasticity.DOI
245. Bin Chen, Xianghe Peng, Jinghong Fan (2005). Research on the Parallel Arrangement of Aragonite Sheets in Clam's Shell. Key engineering materials.DOI
246. Bin Chen, Xianghe Peng, Jing Hong Fan (2005). Round-Hole-Fiber Distribution in Hydrophilidae Cuticle and Biomimetic Research. Key engineering materials.DOI
247. B. Chen, Xianghe Peng, Jianguo Wang, Xiaozhi Wu (2005). Experiment and analysis of the fiber shape of curculionidae cuticle. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
248. Bohao Chen, Xianghe Peng, Jianguo Wang, X. Wu (2005). Experiment and analysis on the aragonite layer of clam shell. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
249. Bin Chen, Xianghe Peng, Jinghong Fan, Wanlu Wang (2005). RESEARCH ON THE NANOMETER DENDRITIC FIBERS IN DORBEETLE CUTICLE. International Journal of Modern Physics B.DOI
250. BIN CHEN, Xianghe Peng, Jinghong Fan, Wanlu Wang (2005). RESEARCH OF THE NANOMETER HELICOIDAL LAYUP OF RUFESCENS SHELL. International Journal of Modern Physics B.DOI
251. Bin Chen, Xianghe Peng, Jinghong Fan, Songlin Chen (2005). Constitutive Relation of Casting Aluminum Alloy A101 Involving Void Evolution. MATERIALS TRANSACTIONS.DOI
252. 彭向和，曾祥国，贺岩松（2004）. 国际非均匀材料力学会议(ICHMM)简介. 《力学进展》.
253. 陈斌，董勤军，吴晓金，彭向和，范镜泓（2004）. 蛤蜊壳的层状微结构与陶瓷/聚合物复合材料的仿生研究. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
254. 张培源，张晓敏，严波，彭向和（2004）. 裂尖曲率对裂纹前缘塑性区的影响. 《应用力学学报》.
255. 皮文丽，彭向和（2004）. 塑性耗散功的强化描述及其应用. 《重庆大学学报》.
256. 李海涛，彭向和，黄尚廉（2004）. 形状记忆合金的一种基于经典塑性理论的两相混合本构模型. 《固体力学学报》.
257. 万玲，彭向和（2004）. 岩石黏弹塑性损伤本构模型. 《科技、工程与经济社会协调发展——中国科协第五届青年学术年会论文集》.
258. 陈斌，吴晓金，吴新燕，彭向和，范镜泓（2004）. 金龟子外甲壳的螺旋纤维管道微结构. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
259. Bohao Chen, Jianguo Wang, Xianghe Peng, Congzhong Cai, Xiaozhi Wu (2004). NANOMETER CHITIN FIBER AND LAYUP OF THE CHAFER CUTICLE. International Journal of Nanoscience.DOI
260. B. Chen, Xianghe Peng, Jianguo Wang, Jing Hong Fan, Xiaozhi Wu (2004). Investigation of fiber configurations of chafer cuticle by SEM, mechanical modeling and test of pullout forces. Computational Materials Science.DOI
261. B. Chen, Xianghe Peng, Jianguo Wang, X Wu (2004). Spiry-layup model of Rutelidae cuticle. Computational Materials Science.DOI
262. Bohao Chen, Xianghe Peng, Jianguo Wang, Xueyan Wu (2004). An elastoplastic constitutive description for casting magnesium alloy ZL305. Computational Materials Science.DOI
263. Y. Liu, Xianghe Peng, Yi Qin (2004). FE simulation for concurrent design and manufacture of automotive sheet-metal parts. Journal of Materials Processing Technology.DOI
264. Xianghe Peng, Yi Qin, R. Balendra (2004). Analysis of laser-heating methods for micro-parts stamping applications. Journal of Materials Processing Technology.DOI
265. Bohao Chen, Xianghe Peng, Jianguo Wang, Xiaozhi Wu (2004). Laminated microstructure of Bivalva shell and research of biomimetic ceramic/polymer composite. Ceramics International.DOI
266. Bin Chen, Xianghe Peng, Jinghong Fan (2004). Round-Hole-Fiber Distribution in Insect Cuticle and Biomimetic Research. JSME International Journal Series C.DOI
267. Bin Chen, Xianghe Peng, Jinghong Fan, Zhengyuan Gao, X. Wu (2004). The Spiry Layup of Insect Cuticle and Biomimetic Design(Biomimetics & Innovative Design). The Proceedings of the Asian Pacific Conference on Biomechanics emerging science and technology in biomechanics.DOI
268. 黄淑容，彭向和，秦义（2003）. 实心试件大变形扭转试验的有限元模拟. 《重庆大学学报》.
269. 万玲，彭向和，杨运民，陈裕泽，尹益辉，陈刚（2003）. 温度及温升率历史对H62及1Cr18Ni9Ti力学性能的影响. 《材料工程》.
270. 张晓敏，张培源，彭向和（2003）. 初应力位形上小的变形问题. 《工程力学》.
271. 司鹄，彭向和（2003）. 磁流变流体的磁流变效应. 《重庆大学学报》.
272. 张培源，张晓敏，严波，彭向和（2003）. 血管的应力和零应力位形. 《应用力学学报》.
273. 刘绘新，张鹏，陈斌，彭向和（2003）. 塔里木软岩层蠕变规律实验研究. 《西部探矿工程》.
274. Xianghe Peng, Jing Hong Fan (2003). Analysis for polycrystal nonproportional cyclic plasticity with a dissipated energy based rule for cross-hardening. International Journal of Solids and Structures.DOI
275. Jianjun Wang, Runfang Li and, Xianghe Peng (2003). Survey of nonlinear vibration of gear transmission systems. Applied Mechanics Reviews.DOI
276. 司鹄，彭向和（2002）. 电流变流体的本构模型. 《重庆大学学报》.
277. 司鹄，彭向和（2002）. 磁流变材料的流变性能研究. 《材料科学与工程学报》.
278. 杨运民，王军，彭向和（2002）. 一种双相材料的应变等效非局部本构模型. 《重庆大学学报》.
279. 杨运民，陈裕泽，尹益辉，彭向和，王军（2002）. 温升率对预载LY12试件热破坏影响的实验研究. 《强激光与粒子束》.
280. Bin Chen, Zhan Hua Gao, Xianghe Peng, Jing Hong Fan, Changwan Cai (2002). Micro-Macro Combined Study for a Porous Constitutive Model Based on the Analysis of a Cylindrical Void. Key engineering materials.DOI
281. B. Chen, Weiguo Li, Xianghe Peng (2002). A microvoid evolution law involving change of void shape and micro/macroscopic analysis for damaged materials. Journal of Materials Processing Technology.DOI
282. B. Chen, Xianghe Peng, W. Wang, Junqian Zhang, R. Zhang (2002). Research on the microstructure of insect cuticle and the strength of a biomimetic preformed hole composite. Micron.DOI
283. Xianghe Peng, Jintu Fan, J. Zeng (2002). Microstructure-based description for the mechanical behavior of single pearlitic colony. International Journal of Solids and Structures.DOI
284. Xianghe Peng, Jing Hong Fan, Yuanlong Yang (2002). A microstructure-based description for cyclic plasticity of pearlitic steel with experimental verification. International Journal of Solids and Structures.DOI
285. 陈斌，彭向和，杨运民，王军，陈裕泽，尹益辉，陈刚（2001）. 不同温升率下预载H62黄铜破坏的实验研究. 《金属学报》.
286. 王军，彭向和，杨运民（2001）. 两种PD3钢轨钢的低周疲劳比较. 《重庆大学学报》.
287. 司鹄，彭向和（2001）. 磁流变材料的粘塑性模型. 《重庆大学学报》.
288. 常建，杨运民，彭向和，黄尚廉（2001）. 一种磁流变液流变特性测试装置的研究. 《仪器仪表学报》.
289. 杨运民，彭向和，陈裕泽，尹益辉，陈刚（2000）. 温升率对LY12铝合金拉伸响应特性的影响. 《金属学报》.
290. 盛光敏，范镜泓，彭向和（2000）. PD3钢轨钢接触疲劳裂纹扩展行为研究. 《金属学报》.
291. 彭向和，韩勇，黄尚廉（2000）. 形状记忆合金拟弹性行为的热力学描述. 《应用力学学报》.
292. 陈斌，彭向和，范镜泓（2000）. 生物自然复合材料的结构特征及仿生复合材料的研究. 《复合材料学报》.
293. 彭向和，曾俊，盛光敏，高芝晖（2000）. 细片层珠光体团的塑性响应特性. 《重庆大学学报》.
294. 高芝晖，杨杰，彭向和，曾祥国（2000）. 氢降低金属滞后开裂断裂韧性的定量描述. 《重庆大学学报》.
295. 盛光敏，范镜泓，彭向和（2000）. 工艺状态和应力水平对PD3钢轨钢接触疲劳寿命的影响. 《金属学报》.
296. 彭向和，曾祥国（2000）. 一种非经典滑移模型及其应用. 《固体力学学报》.
297. Xianghe Peng, Christian Meyer (2000). A continuum damage mechanics model for concrete reinforced with randomly distributed short fibers. Computers & Structures.DOI
298. Xianghe Peng (2000). EFFECT OF HEATING SPEED ON MECHANICAL PROP- ERTIES OF LY12 ALUMINUM ALLOYS. Acta Metallurgica Sinica.
299. Xianghe Peng (2000). INFLUENCE OF TECHNICAL STATES AND STRESS LEVELS ON CONTACT FATIGUE LIFE OF PD3 RAIL STEEL. Acta Metallurgica Sinica.
300. Xianghe Peng (2000). INVESTIGATION OF CONTACT FATIGUE CRACK GROWTH BEHAVIORS FOR PD3 RAIL STEEL. Acta Metallurgica Sinica.
301. 杨运民，彭向和（1999）. 内时本构方程材料常数简易确定方法. 《力学与实践》.
302. 盛光敏，范镜泓，彭向和，籍可槟，苏世怀，柯晓涛（1999）. PD3钢轨钢接触疲劳变形组织的TEM观察. 《钢铁》.
303. 杨运民，彭向和，陈元强（1999）. 含预成型孔复合材料层合板的强度分析. 《复合材料学报》.
304. 杨运民，彭向和，张晓敏（1999）. 一种基于有限元方法的破坏生长模型. 《重庆大学学报》.
305. 彭向和，韩勇，黄尚廉（1999）. SMA 伪弹性和形状记忆特性的描述. 《重庆大学学报》.
306. Bi Zhang, Xianghe Peng (1999). Grinding Damage Prediction for Ceramics via CDM Model. Journal of Manufacturing Science and Engineering.DOI
307. 陈斌，彭向和，王军，梁锡昌（1998）. 生物复合材料及仿生复合材料的研究. 《第三届中国功能材料及其应用学术会议论文集》.
308. 彭向和，曾祥国，范镜泓（1998）. 一种非经典晶体塑性本构模型及其应用. 《应用数学和力学》.
309. 盛光敏，范镜泓，彭向和，蒋斌，籍可槟，苏世怀，柯晓涛（1998）. PD3钢轨钢接触疲劳行为研究. 《钢铁》.
310. 彭向和，高芝晖，曾祥国（1998）. O形密封环的弹塑性大变形和循环松弛分析. 《重庆大学学报》.
311. 杨运民，彭向和，陈元强（1998）. 含预成型孔复合材料单层板的一种设计方法. 《重庆大学学报》.
312. 彭向和，陈斌（1998）. SMA形状记忆行为的描述. 《第三届中国功能材料及其应用学术会议》.
313. 陈斌，高芝晖，彭向和（1998）. 损伤弹塑性大变形本构方程. 《西南交通大学学报》.
314. 彭向和，曾祥国，范镜泓 (1998). A NONCLASSICAL CONSTITUTIVE MODEL FOR CRYSTALPLASTICITY AND ITS APPLICATION. Applied Mathematics and Mechanics(English Edition).
315. Xianghe Peng, X. Zeng, Jing Hong Fan (1998). A physically based description for coupled plasticity and creep deformation. International Journal of Solids and Structures.DOI
316. 彭向和，曾祥国（1997）. 蠕变-塑性交互作用的一种本构模型. 《应用力学学报》.
317. 陈斌，高芝晖，彭向和，范镜泓（1997）. 新的空洞型损伤演化律及损伤弹塑性大变形有限元描述. 《内蒙古工业大学学报(自然科学版)》.
318. Xianghe Peng, X. Zeng, Jing Hong Fan (1997). On a nonclassical constitutive theory of crystal plasticity. Mechanics Research Communications.DOI
319. Xianghe Peng, Jing Hong Fan, X. Zeng (1996). Analysis for plastic buckling of thin-walled cylinders via non-classical constitutive theory of plasticity. International Journal of Solids and Structures.DOI
320. 彭向和，陈元强，曾祥国 (1995). ENDOCHRONIC ANALYSIS FOR COMPRESSIVE BUCKLING OF THIN－WALLED CYLINDERS IN YIELD REGION. Applied Mathematics and Mechanics(English Edition).
321. Xianghe Peng, Alan R. S. Ponter (1994). A constitutive law for a class of two-phase materials with experimental verification. International Journal of Solids and Structures.DOI
322. 彭向和（1993）. 考虑材料强化的塑性安定性分析. 《应用力学学报》.
323. 高芝晖，彭向和，黄晨光（1993）. 弹塑性大变形分析的一种热力学相容的本构模型. 《重庆大学学报》.
324. 彭向和，高芝晖，马鸣图，颜在先（1993）. 16Mn钢非比例循环塑性的研究. 《金属学报》.
325. Xianghe Peng, Jing Hong Fan (1993). A numerical approach for nonclassical plasticity. Computers & Structures.DOI
326. Xianghe Peng, Alan R. S. Ponter (1993). Extremal properties of endochronic plasticity, part I: Extremal path of the constitutive equation without a yield surface. International Journal of Plasticity.DOI
327. Xianghe Peng, Alan R. S. Ponter (1993). Extremal properties of endochronic plasticity, part II: Extremal path of the constitutive equation with a yield surface and application. International Journal of Plasticity.DOI
328. 彭向和，范镜泓（1992）. 积分型内时本构方程的增量形式及其应用. 《重庆大学学报》.
329. 彭向和，范镜泓，马鸣图（1992）. 金属材料非比例循环塑性的本构描述. 《重庆大学学报》.
330. 彭向和（1992）. 一类双相钢循环特性的研究. 《重庆大学学报》.
331. 彭向和，高芝晖，范镜泓 (1992). CONSTITUTIVE MODELLING OF NONPROPORTIONAL CYCLIC PLASTICITY. Acta Mechanica Sinica.

书籍章节

1. Xianghe Peng (2015). A MICRO-MACRO MODEL FOR CONSTITUTIVE BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS AND APPLICATIONS. IMPERIAL COLLEGE PRESS eBooks.DOI
2. Xianghe Peng, Ning Hu, Hengwei Zheng, Chenhao Fang (2010). A comprehensive analysis for the shakedown of a Bree plate made of functionally graded materials. Acta Mechanica.DOI
3. Zhongjun Ren, Xianghe Peng, Ning Hu, Chunhe Yang (2009). A micromechanical damage model for rocks and concretes under triaxial compression. Applied Mathematics and Mechanics.DOI
4. Xianghe Peng, Huanhuan Li (2006). Numerical Simulation of the Microstructure of Magnetorheological Fluids in Magnetic Fields. Springer eBooks.DOI