赵文良

2026

Design and multi-objective optimization of a novel axially-magnetized rotary-linear permanent magnet generator using grey relational analysis for integrated wind-wave energy conversion systems

Renewable Energy

DOI

2026

Robust Adaptive Control Barrier Function-Based Model Predictive Speed Control for PMSM Drives With Current Safety Guarantees

IEEE Transactions on Industrial Electronics

DOI

2026

Dynamics Analysis of Flexible Rotors in Ground‐Based Test Platform for Large‐Capacity Offshore Wind Turbines

IET Renewable Power Generation

DOI

2026

Dual Active-Resonance Capacitorless WPT System for Wide-Frequency Operation

IEEE Transactions on Industrial Electronics

DOI

2026

Turn-to-Turn Short Circuit Fault Diagnosis of Wind Turbine Generator System in Ground Test Platform Based on ConvNeXt-ViT Architecture

IEEE Transactions on Industrial Electronics

DOI

2026

Single-Loop Dual-Mode Model Predictive Control for Synchronous Motor Drives With Unified Speed–Current Optimization

IEEE Transactions on Power Electronics

DOI

2026

Optimization and performance analysis of a 2DoF rotary-linear PM machine with axially-separated windings for screw locking applications

Results in Engineering

DOI

2026

Three‐Zone Nonuniform Coil Geometry for Magnetic‐Field Uniformity and Robust Foreign‐Object Detection in EV Wireless Power Transfer

International Journal of Circuit Theory and Applications

DOI

2026

Torque Performance Improvement via Amplitude-Phase Collaborative Modulation From the Perspective of Excitation-Source Offset in Asymmetric Salient-Pole PMSMs

IEEE Transactions on Transportation Electrification

DOI

2026

Active-Resonance Receiver for Detuning-Tolerant Multi-Segment Wireless Power Transfer Systems

IEEE Journal of Emerging and Selected Topics in Power Electronics

DOI

2026

Analytical Model for Electromagnetic-Vibration Prediction in Inverter-Fed Synchronous Reluctance Motor

IEEE/ASME Transactions on Mechatronics

DOI

2026

Rapid Evaluation Method for Reliability of Interior Permanent Magnet Synchronous Motors

IEEE Transactions on Transportation Electrification

DOI

2026

Design and COPRAS-based multi-objective optimization of a two-degree-of-freedom rotary-linear permanent magnet generator for wave energy conversion

Ocean Engineering

DOI

2026

Enhancing wave energy conversion with a two-degree-of-freedom permanent magnet generator: Design and multi-objective optimization

Energy Sustainable Development/Energy for sustainable development

DOI

2025

基于磁场调制原理的双三相聚磁式永磁同步电机转矩性能分析

《中国电机工程学报》

2025

Fast Evaluation and Suppression of Electromagnetic Vibrations in Interior Permanent Magnet Synchronous Motors Based on Improved Subdivision Subdomain Models

IEEE transactions on energy conversion

DOI

2025

Research on Magnetic Field Prediction of Synchronous Reluctance Motor Considering Structure of Multilayer Flux Barrier and Saturation of Rotor Core

IEEE Transactions on Transportation Electrification

DOI

2025

An Enhanced Hybrid Subdomain Method Toward Electromagnetic-Thermal Performance Analysis of Synchronous Reluctance Motor

IEEE Transactions on Transportation Electrification

DOI

2025

Generalized Design and Optimization of the Surface-Mounted PMSM With Cost-Effective Magnet Configurations

IEEE transactions on energy conversion

DOI

2025

Calculation, Analysis, and Verification of Natural Frequencies of Stators With Unequal-Length Casings of Rotating Motors

IEEE Transactions on Transportation Electrification

DOI

2025

Low-Speed Sensorless Control of SynRM Using Hybrid Biaxial Pseudorandom High-Frequency Signal Injection Strategy for High-Frequency Torque Ripple and Electromagnetic Vibration Suppression

IEEE Transactions on Power Electronics

DOI

2025

Three-Dimensional Thermal and Stress Analysis of Synchronous Reluctance Motor by an Improved Hybrid Method

IEEE Transactions on Energy Conversion

DOI

2025

Vibration Suppression of Flux-Concentrated Phase-Group Centralized Winding PMSM With Auxiliary Stator Based on Magnetic Field Editing Approach

IEEE Transactions on Industrial Electronics

DOI

2025

Analysis and Improvement of Reliability of Surface-Mounted Permanent Magnet Synchronous Motors Based on Subdivision Subdomain Models

IEEE Transactions on Energy Conversion

DOI

2025

State Calculation, Analysis, and High-Precision Location Diagnostic Method for Irreversible Demagnetization in SPMSM

IEEE Transactions on Industrial Electronics

DOI

2025

Improved Leading-Angle Flux-Weakening Control for Surface-Inset Permanent Magnet Synchronous Motor Considering Asymmetric Rotor Effects

IEEE Transactions on Power Electronics

DOI

2025

Calculation of Natural Frequencies and Analysis of Vibration Characteristics of Stators of Electrical Machines Considering Radial Symmetric and Antisymmetric Modes

IEEE Transactions on Industrial Electronics

DOI

2025

Multiobjective Robust Optimisation Design for Nanocrystalline High‐Frequency Transformer Based on Multi‐Physical Field Considering Core Uncertainty

IET Electric Power Applications

DOI

2025

A Universal Semi-Analytical Method for Rapid Analysis and Calculation of Electromagnetic Vibrations in Surface-Mounted and Interior PMSMs

IEEE Transactions on Industry Applications

DOI

2025

Investigation of Sinusoidal Flux Linkage Effects in High-Speed Axial Flux Permanent Magnet Machines

IEEE Transactions on Industry Applications

DOI

2025

Three-Dimensional Thermal Network Modeling and Temperature Rise Prediction of Nanocrystalline High-Frequency Transformer

CES Transactions on Electrical Machines and Systems

DOI

2025

An upgraded hybrid subdomain method toward three-dimensional thermal performance of synchronous reluctance motor

International Journal of Thermal Sciences

DOI

2025

Investigation of a staggered dual-rotor wound field synchronous motor for offshore wind turbine full-scale testing platforms

Scientific Reports

DOI

2025

Single-Loop Coordinated Speed Control of Dual PMSM Systems Considering Load Sharing

DOI

2025

Circulating Current Suppression in Modular Multilevel Converters via Vector Resonance Control Approach

DOI

2025

Analytical Model for Eccentric IPMSM via a New Equivalent Transformation Method and Its Rotor Vibration Calculation Considering the Coupling Effect

IEEE Transactions on Transportation Electrification

DOI

2025

A Permanent Magnet Concentrated-Flux Synchronous Reluctance Motor With Torque Improvement for Autonomous Ship Propulsion

IEEE Transactions on Transportation Electrification

DOI

2025

A Review on Structural-Electromagnetic Aspects of Two-Degree-of-Freedom Rotary-Linear Motors for Automation Applications

IEEE/ASME Transactions on Mechatronics

DOI

2025

Calculation and Analysis for Multidimensional Natural Frequencies of Cylindrical Motors Based on Precise Analytical Model Considering Distinct Additional Ribs and Anisotropic Material Parameters

IEEE Transactions on Transportation Electrification

DOI

2025

High-Frequency Transformers Fault Diagnosis under Multi-Physical Field Coupling Based on Feature Learning

DOI

2025

Multi-Physical Field Optimization Design of High-Frequency Transformers Based on the NSGA-II Algorithm

DOI

2025

Interpolation-Based Torque Control Strategy for Torque Ripple Reduction in Flux-Concentrated PMSM With Auxiliary Stator

IEEE Journal of Emerging and Selected Topics in Power Electronics

DOI

2025

Optimization Design of Micro Permanent Magnet Synchronous Generator for Breeze Power Generation Based on Evolutionary Taguchi Method

International Conference on Green Energy and Applications (ICGEA)

DOI

2025

Design and Optimization of Low-Budget Yokeless and Segmented Armature Electrical Machine

SAE technical papers on CD-ROM/SAE technical paper series

DOI

2025

Zonal Multisegment WPT for High-Power Overhead Hoist Systems Based on Dual-Coupling H-Pickup

IEEE Transactions on Transportation Electrification

DOI

2024

Analytical Calculation of Slotless Axial Flux Permanent Magnet Motor With Sinusoidal Magnets for Torque Ripple Reduction

IEEE transactions on magnetics

DOI

2024

Optimal Design of Surface-Mounted Permanent Magnet Motor With Multi-Level Magnet Combination Using Analytical Method

IEEE transactions on magnetics

DOI

2024

Torsional Vibration Analysis and Optimization Design of the Surface PM Synchronous Machine With Reduced Torque Ripple

IEEE Transactions on Transportation Electrification

DOI

2024

Optimization Design of Interior Permanent Magnet Synchronous Motor With U-Shaped Rotor for Low-Level Torque Ripple and Electromagnetic Vibration

IEEE Transactions on Transportation Electrification

DOI

2024

Fast Calculation of Electromagnetic Vibration of Surface-Mounted PMSM Considering Teeth Saturation and Tangential Electromagnetic Force

IEEE transactions on industrial electronics (1982. Print)

DOI

2024

Optimization Design of Surface Permanent Magnet Synchronous Motor with Hybrid Magnets Using Analytical Method

IEEE Conference on Electromagnetic Field Computation

DOI

2024

Modelling and optimisation of the surface‐mounted permanent magnet machine with multi‐level array magnets

IET electric power applications

DOI

2024

Magnetic Field Analysis and Calculation of Slotless Axial Flux Permanent Magnet Motor with Sinusoidal Back EMF

IEEE Conference on Electromagnetic Field Computation

DOI

2024

Prediction of Post-Demagnetization Electromagnetic Performance for SPMSM Considering Rotor Eccentricity

IEEE Transactions on Transportation Electrification

DOI

2024

Analytical Design and Optimization of Surface-Mounted PMSMs with Equal-Thickness Air Gap

IEEE Conference on Electromagnetic Field Computation

DOI

2024

Rapid Prediction of Magnetic and Temperature Field Based on Hybrid Subdomain Method and Finite-Difference Method for the Interior Permanent Magnet Synchronous Motor

IEEE Transactions on Transportation Electrification

DOI

2024

Magnetic Field Calculation of the U-Shaped Interior Permanent-Magnet Synchronous Machine Considering the Parallel Magnetization and Bridge Saturation

IEEE transactions on industrial electronics (1982. Print)

DOI

2024

Flux Weakening Control Strategy for Asymmetric Surface Inset Permanent Magnet Synchronous Motors Based on Reoriented dq -Axis Reference Frame

IEEE Transactions on Industrial Electronics

DOI

2024

Electromagnetic Field Analysis and Diagnosis of Rotor Demagnetization and Eccentricity Faults in SPMSM

IEEE Transactions on Magnetics

DOI

2024

Modeling Dual-Saturation Effects and Torque Suppressed Self-Commissioning for Synchronous Reluctance Motor

IEEE Journal of Emerging and Selected Topics in Power Electronics

DOI

2024

Core Loss Calculation of Nanocrystalline High-Frequency Transformer Under Non-Sinusoidal Excitation

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2024

Design and Analysis of a Rotor-Coreless Multi-Disk Axial Flux Permanent Magnet Motor with Unaligned Permanent Magnets

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2024

Analytical Modeling and Optimization of Permanent Magnet Synchronous Machine With Hybrid Magnets

IEEE Transactions on Industry Applications

DOI

2024

Analysis of Parasitic Parameters and Winding Loss Characteristics of High-Frequency Transformer under Different Winding Structures

Journal of Physics Conference Series

DOI

2024

Improved Synchronous Space Vector Pulse Width Modulation Strategy for Three-Level With Common-Mode Voltage Suppression

IEEE Access

DOI

2023

Electromagnetic Vibration Characteristics of Inter-Turn Short Circuits in High Frequency Transformer

Electronics

DOI

2023

Permanent magnet assisted synchronous reluctance motor with asymmetric rotor for high torque performance

CES Transactions on Electrical Machines and Systems

DOI

2023

Study on the Winding Switching Process of Pole Changing LSPMSM

2023 IEEE 6th International Electrical and Energy Conference (CIEEC)

DOI

2023

Nonlinear Predictive Control of Interior Permanent Magnet Synchronous Machine with Extra Current Constraint

Energies

DOI

2023

Analysis of a High-Speed Axial Flux Permanent Magnet Synchronous Motor With Cost-Effective Hybrid Magnets

IEEE transactions on magnetics

DOI

2023

Cascaded Model Predictive Control for the Ferrite-Assisted Synchronous Reluctance Motor with Asymmetric Rotor Structure

2023 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

DOI

2023

Torque improvement of spoke-type permanent magnet motor with auxiliary stator using harmonic current control strategy

CES Transactions on Electrical Machines and Systems

DOI

2023

Model Predictive Control for Salient Pole Offset Surface Inset Permanent Magnet Synchronous Motor

2023 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

DOI

2023

Electromagnetic Force Waves Reduction of Surface-mounted Permanent Magnet Synchronous Motors Based on Segmented Magnetic Poles with Different Combinations of Pole-arc Coefficients

2023 IEEE 18th Conference on Industrial Electronics and Applications (ICIEA)

DOI

2023

Editorial: High quality and reliability of transformers

Frontiers in Energy Research

DOI

2023

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Processes

DOI

2023

Calculation of no‐load induced electromotive force of pole changing line‐start permanent magnet synchronous motor

IET electric power applications

DOI

2023

An Accurate Calculation Method of Natural Frequencies of the Radial-Flux Slotted Motors Considering End Covers

IEEE transactions on industrial electronics (1982. Print)

DOI

2023

Study on the Pole-slot Combination of Low Power Series Pole Changing Line Start Permanent Magnet Synchronous Motor

2023 IEEE 18th Conference on Industrial Electronics and Applications (ICIEA)

DOI

2023

Design and Analysis of Basic Model of High-speed Surface-mounted Permanent Magnet Synchronous Motors Based on Subdomain Method

Journal of Electrical Engineering and Technology

DOI

2023

Capacitance balance control strategy for three-phase four-switch open-winding permanent magnet synchronous motor

International Journal of Applied Electromagnetics and Mechanics

DOI

2023

Electromagnetic Vibration Reduction of Surface-Mounted Permanent Magnet Synchronous Motors Based on Eccentric Magnetic Poles

Journal of Electrical Engineering and Technology

DOI

2023

Analysis of a Double-Stator Rotary Linear Permanent Magnet Motor with Phase-Group Concentrated-Coil Windings

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2023

Analysis of Loss Characteristics and Parasitic Parameters of High-Frequency Transformer under Sinusoidal and Non-sinusoidal Excitation

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2023

Analytical Calculation of Magnetic Field for Permanent Magnet Synchronous Machine with Hybrid Magnets

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2023

Design and Optimization of Permanent-Magnet Fault-Tolerant Motors for Electric Aircraft Based on Multi-Objective Genetic Algorithm

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2023

Design of Low Voltage Ride-Through Control System for Doubly Fed Wind Power Generator

International Conference on Power System Technology (POWERCON)

DOI

2023

Analysis and Modeling of Low Voltage Ride Through for Permanent Magnet Direct-Drive Wind Turbines

International Conference on Power System Technology (POWERCON)

DOI

2022

基于IGBT选型的整流器、逆变器损耗计算新方法研究

《智慧电力》

2022

Control System for a Novel Dual-Rotor Permanent Magnet Synchronous Reluctance Motor Considering Torque Superposition

International Conference on Electrical Machines and Systems

DOI

2022

Design and Analysis of a Double-Stator Permanent Magnet Linear Motor Using Single-Sided Phase-Group Concentrated-Coil Windings

International Conference on Electrical Machines and Systems

DOI

2022

Electromagnetic-Thermal Coupling Analysis of Concentrated-Flux Permanent Magnet Synchronous Motor with Auxiliary Stator

International Conference on Electrical Machines and Systems

DOI

2022

Calculation of Stator Natural Frequencies of Electrical Machines Considering Complex Boundary Conditions

IEEE transactions on industry applications

DOI

2022

Analysis of a High-Speed Axial Flux Permanent Magnet Motor With Hybrid Magnets for Low Cost

IEEE Conference on Electromagnetic Field Computation

DOI

2022

Study on Pole-changing Starting Scheme for Line-start Permanent Magnet Synchronous Motor

2022 4th International Conference on Smart Power & Internet Energy Systems (SPIES)

DOI

2022

Optimal Design and Control of a Spoke-Type IPM Motor with Asymmetric Flux Barriers to Improve Torque Density

Symmetry

DOI

2022

Study on leakage magnetic field and magnetic field shielding for transformers

International Journal of Applied Electromagnetics and Mechanics

DOI

2022

Design and analysis of in-wheel motor with sinusoidal permanent magnet shape for electrical vehicles

International Journal of Applied Electromagnetics and Mechanics

DOI

2022

Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings

Journal of Electrical Engineering and Technology

DOI

2022

Magnetic Field Prediction of the Saturated Surface-Mounted Permanent Magnet Synchronous Machine With Rotor Eccentricity

IEEE transactions on industrial electronics (1982. Print)

DOI

2022

Optimization of Stator Slot Parameters for Electromagnetic Vibration Reduction of Permanent Magnet Synchronous Motors

IEEE Transactions on Transportation Electrification

DOI

2022

Design and analysis of dual-stator five-phase permanent magnet synchronous machine with concentrated-coil windings

Other Conferences

DOI

2021

表贴式永磁同步电机电磁激振力波计算与定子振动特性分析

《中国电机工程学报》

DOI

2021

非对称转子永磁辅助式同步磁阻电机优化设计

《导航与控制》

2021

Analysis of a Novel Surface-Mounted Permanent Magnet Motor With Hybrid Magnets for Low Cost and Low Torque Pulsation

IEEE transactions on magnetics

DOI

2021

Performance Improvement of Spoke-Type Interior Permanent Magnet Motors with Asymmetric Rotor Structures

International Conference on Electrical Machines and Systems

DOI

2021

Magnetic Field Calculation of the Eccentric Surface-mounted Permanent Magnet Machine

2021 13th International Symposium on Linear Drives for Industry Applications (LDIA)

DOI

2021

Operating Principle and Cogging Normal Force Analysis of a Novel Double-Sided Permanent Magnet Linear Synchronous Motor

2021 13th International Symposium on Linear Drives for Industry Applications (LDIA)

DOI

2021

Torsional vibration analysis of the surface‐mounted permanent magnet synchronous machine using analytical model considering flux harmonics

DOI

2021

Cogging torque reduction based on segmented skewing magnetic poles with different combinations of pole‐arc coefficients in surface‐mounted permanent magnet synchronous motors

IET electric power applications

DOI

2021

Design and Analysis of a Novel Dual-Stator Tubular Linear Machine with Split Teeth Structure

2021 13th International Symposium on Linear Drives for Industry Applications (LDIA)

DOI

2021

Calculation of Stator Natural Frequencies of Permanent Magnet Synchronous Motors Considering Complex Boundary Conditions

2021 13th International Symposium on Linear Drives for Industry Applications (LDIA)

DOI

2021

Design and Simulation of a Model Predictive Control System for a Novel Dual-Rotor Flux-Switching Permanent Magnet Motor

2021 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

DOI

2021

Design and Analysis of Low-Speed High-Torque Permanent Magnet Synchronous Machines for Industrial Agitators

International Conference on Electrical Machines and Systems

DOI

2021

Analysis and Reduction of Electromagnetic Force Waves of Permanent Magnet Synchronous Motors Considering Rotor Eccentricity

Journal of Electrical Engineering and Technology

DOI

2021

Calculation Method for Natural Frequencies of Stator of Permanent Magnet Synchronous Motors Based on Three-Dimensional Elastic Theory

IEEE transactions on energy conversion

DOI

2020

永磁同步电机转子偏心空载气隙磁场解析计算

《电机与控制学报》

2020

Design and Optimization of Hybrid Excitation Synchronous Machine Based on Multi-objective Genetic Algorithm

2020 IEEE 3rd Student Conference on Electrical Machines and Systems (SCEMS)

DOI

2020

Research on weakening measure of radial electromagnetic force waves in permanent magnet synchronous motors by inserting auxiliary slots

IET electric power applications

DOI

2020

Design and Optimization of a Novel Dual-Stator Flux-Switching Permanent Magnet Machine

2020 IEEE 3rd Student Conference on Electrical Machines and Systems (SCEMS)

DOI

2020

Study and design of dual stator permanent magnet machine with spoke-type configurations using phase-group concentrated-coil windings

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Reduction of Radial Electromagnetic Force Waves Based on PM Segmentation in SPMSMs

IEEE transactions on magnetics

DOI

2020

Optimal design of a surface-mounted permanent magnet motor with multi-grade ferrite magnets to reduce torque pulsations

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Unity power factor control of permanent magnet synchronous motor by using open winding configuration

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Electromagnetic force density calculation in surface‐mounted PM synchronous machine with rotor eccentricity by an equivalent transformation method

DOI

2020

Analysis of a Novel Hybrid Excitation Synchronous Motor with Asymmetric Rotor

2020 IEEE 3rd Student Conference on Electrical Machines and Systems (SCEMS)

DOI

2020

Design and analysis of a novel variable flux spoke-type motor for washing machines

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Analysis of the Synchronization Process and the Synchronization Capability for a Novel 6/8-Pole Changing LSPMSM

IEEE transactions on magnetics

DOI

2020

Study of transformer magnetic properties considering temperature influence of electrical steel sheet

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Optimization of PM-Assisted Synchronous Reluctance Motor with Asymmetric Rotor

2020 IEEE 1st China International Youth Conference on Electrical Engineering (CIYCEE)

DOI

2020

Optimization Analysis of Inherent Shaft Voltage in Line-Start Permanent Magnet Synchronous Motor

IEEE Conference on Electromagnetic Field Computation

DOI

2020

Multi-physics Analysis of Surface Inset Permanent Magnet Motors with Different Slot-Pole Combinations

2020 IEEE 3rd Student Conference on Electrical Machines and Systems (SCEMS)

DOI

2020

Design and Optimization of a Novel Dual-Rotors Flux-Switching Permanent-Magnet Machine

2020 IEEE 1st China International Youth Conference on Electrical Engineering (CIYCEE)

DOI

2020

Design and analysis of a high-performance surface inset permanent magnet motor with asymmetrical rotor

International Journal of Applied Electromagnetics and Mechanics

DOI

2019

Study on Shaft Voltage in Fractional Slot Permanent Magnet Machine With Different Pole and Slot Number Combinations

IEEE transactions on magnetics

DOI

2019

The Analysis and Calculation of Load Radial Electromagnetic Force of the Interior Permanent Magnet Synchronous Machine

International Conference on Electrical Machines and Systems

DOI

2019

Design and analysis of a novel hybrid-excited wound-rotor synchronous machine with high electromagnetic performance

International Journal of Applied Electromagnetics and Mechanics

DOI

2019

A Novel Dual-Rotor Permanent Magnet Synchronous Reluctance Machine with High Electromagnetic Performance

International Conference on Electrical Machines and Systems

DOI

2019

Study on the Protection and Energy Transmission Modes of One Phase Short Circuit to Ground in Inverters

International Conference on Performance Engineering

DOI

2019

Suppression of Torque Ripple of Synchronous Reluctance Motor by Optimizing Air-gap Magnetic Field

International Conference on Electrical Machines and Systems

DOI

2019

Design and analysis of a high-performance dual-rotor PM synchronous reluctance machine with toroidal windings

International Journal of Applied Electromagnetics and Mechanics

DOI

2019

A novel spoke-type IPM machine with surface-mounted magnets to improve torque characteristics

International Journal of Applied Electromagnetics and Mechanics

DOI

2019

Design and Analysis of a High-Performance Dual-Stator Spoke-Type Linear Machine Using Phase-Group Concentrated-Coil Windings

International Conference on Electrical Machines and Systems

DOI

2019

Performance Analysis on a Surface-mounted Permanent Magnet Synchronous Generator with Hybrid Excitation based on Equivalent Magnetic Circuit

International Conference on Electrical Machines and Systems

DOI

2018

A Novel Line-Start Permanent Magnet Synchronous Motor With 6/8 Pole Changing Stator Winding

IEEE transactions on energy conversion

DOI

2018

Analysis on a Novel Flux Adjustable Permanent Magnet Coupler With a Double-Layer Permanent Magnet Rotor

IEEE transactions on magnetics

DOI

2018

Flux-Switching Permanent Magnet Machine with Phase-Group Concentrated-Coil Windings and Cogging Torque Reduction Technique

Energies

DOI

2018

Research on Weakening Measures of Electromagnetic Force Waves of SPMSM

Asia-Pacific Magnetic Recording Conference

DOI

2018

Analysis of the Synchronization Process and the Synchronization Capability for a Novel 6/8 Pole Changing Line-Start Permanent Magnet Synchronous Motor

Asia-Pacific Magnetic Recording Conference

DOI

2018

The Method for Reducing Intrinsic Shaft Voltage by Suitable Selection of Pole-Arc Coefficient in Fractional-Slot Permanent-Magnet Synchronous Machines

IEEE transactions on magnetics

DOI

2018

Design and optimisation of a novel asymmetric rotor structure for a PM‐assisted synchronous reluctance machine

IET electric power applications

DOI

2018

A New Hybrid Permanent Magnet Synchronous Reluctance Machine With Axially Sandwiched Magnets for Performance Improvement

IEEE transactions on energy conversion

DOI

2018

Optimal Design and Experimental Test of a SPM Motor With Cost-Effective Magnet Utilization to Suppress Torque Pulsations

IEEE transactions on magnetics

DOI

2018

Design and Analysis of a High-Performance Outer Rotor Brushless DC Motor Using Loading Distribution Method for Range Hood Applications

International Conference on Electrical Machines and Systems

DOI

2018

Analysis on a Novel Flux Adjustable Permanent Magnet Eddy Current Coupler with a Double-layer Permanent Magnet Rotor

IEEE International Magnetics Conference

DOI

2018

Analysis on the Starting and Synchronization Capabilities for a Novel 6/8 Pole Changing Line-Start Permanent Magnet Synchronous Motor

IEEE International Magnetics Conference

DOI

2018

Electromagnetic Vibration Analysis of Surface-Mounted Permanent Magnet Synchronous Machine

IEEE International Magnetics Conference

DOI

2018

Optimal Design and Experimental Test of Surface-Mounted Permanent Magnet Motors with Cost-Effective Magnet Utilization to Suppress Torqu Pulsations

IEEE International Magnetics Conference

DOI

2017

基于晶闸管及IGBT的新型两电平逆变器

《电工技术学报》

2017

Optimal design of the wound field synchronous reluctance machines to improve torque by increasing saliency ratio

IEEE International Magnetics Conference

DOI

2017

Performance Comparison of Dual Airgap and Single Airgap Spoke-Type Permanent-Magnet Vernier Machines

IEEE transactions on magnetics

DOI

2017

Dual airgap stator- and rotor- permanent magnet machines with spoke-type configurations using phase-group concentrated-coil windings

European Conference on Cognitive Ergonomics

DOI

2017

Optimal Design of Wound Field Synchronous Reluctance Machines to Improve Torque by Increasing the Saliency Ratio

IEEE transactions on magnetics

DOI

2017

Research on shaft voltage in permanent magnet synchronous machine with sectionalized stators

International Conference on Electrical Machines and Systems

DOI

2017

Design and analysis of a novel PM-assisted synchronous reluctance machine with axially integrated magnets by finite element method

IEEE Conference on Electromagnetic Field Computation

DOI

2017

A novel cost-effective two-level inverter with combined use of thyristors and IGBTs

2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia)

DOI

2017

Design of a novel energy-saving contactor using two-phase magnetic material

DOI

2016

Design of a novel rotor structure for PM-assisted synchronous reluctance machines to improve torque characteristics

IEEE Conference on Electromagnetic Field Computation

DOI

2016

A Novel Technique for Two-Phase BLDC Motor to Avoid Demagnetization

IEEE transactions on magnetics

DOI

2016

Temperature Field Analysis of an Outer Rotor Brushless DC Motor for Range Hoods

2016

Design and Analysis of a Novel PM-Assisted Synchronous Reluctance Machine With Axially Integrated Magnets by the Finite-Element Method

IEEE transactions on magnetics

DOI

2016

トルク特性を改善するためのPM補助同期リラクタンス機の新しい回転子構造の設計【Powered by NICT】

2016

Performance comparison of dual airgap and single airgap spoke-type Vernier permanent magnet machines

IEEE Conference on Electromagnetic Field Computation

DOI

2016

Dual-stator, spoke-type ferrite permanent magnet motor with phase-group concentrated-coil windings using auxiliary inner stator

International Symposium on Power Electronics, Electrical Drives, Automation and Motion

DOI

2016

Development of flux switching PM machines with phase-group concentrated-coil windings for robot applications

IEEE Conference on Electromagnetic Field Computation

DOI

2016

Optimal design of spoke type motor to improve the torque constant and minimize torque ripple

DOI

2016

Cost-effective permanent magnet shape for reducing cogging torque and torque ripple in surface-mounted permanent magnet machines

DOI

2016

Dual rotor flux switching permanent magnet machines with phase-group concentrated-coil windings for high performance

DOI

2016

Optimal Design of a Spoke-type Permanent Magnet Motor with Phase-group Concentrated-coil Windings to Minimize Torque Pulsations

IEEE transactions on magnetics

DOI

2016

Asymmetrical Rotor Structures in PM-assisted Synchronous Reluctance Motor for High Torque Characteristics

2016

Optimal design of a cost-effective SPM motor to suppress torque pulsations using multi-grade permanent magnets

IEEE Conference on Electromagnetic Field Computation

DOI

2016

Development and test of a dual-stator, spoke-type ferrite permanent magnet motor with high torque performance for direct-drive applications

International Symposium on Power Electronics, Electrical Drives, Automation and Motion

DOI

2016

Analysis and experiment of transformer vibration and noise considering electrical steel sheet magnetostriction

DOI

2015

Torque pulsation minimization in spoke-type interior permanent magnet motors with skewing and sinusoidal permanent magnet configurations

IEEE International Magnetics Conference

DOI

2015

Dual-Stator Two-Phase Permanent Magnet Machines With Phase-Group Concentrated-Coil Windings for Torque Enhancement

IEEE transactions on magnetics

DOI

2015

Comparative Study of Dual-airgap Flux Switching and Spoke-type Interior Permanent Magnet Machines with Phase-group Concentrated-coil Windings

2015

Design of ultra-high speed axial flux permanent magnet machine with sinusoidal back-EMF

IEEE International Magnetics Conference

DOI

2015

A Novel Dual Airgap Ferrite Permanent Magnet Motor with Auxiliary Inner Stator fo In-Wheel Applications

2015

Optimal Design of a Novel Asymmetrical Rotor Structure to Obtain Torque and Efficiency Improvement in Surface Inset PM Motors

IEEE transactions on magnetics

DOI

2015

Design of Ultrahigh Speed Axial-Flux Permanent Magnet Machine With Sinusoidal Back EMF for Energy Storage Application

IEEE transactions on magnetics

DOI

2015

Performance Improvement of Ferrite-Assisted Synchronous Reluctance Machines Using Asymmetrical Rotor Configurations

IEEE transactions on magnetics

DOI

2015

Spoke-type Interior Permanent Magnet Motors with Asymmetrical Rotor Structures for High Torque Density

2015

Dual Airgap Stator- and Rotor-Permanent Magnet Machines With Spoke-Type Configurations Using Phase-Group Concentrated Coil Windings

IEEE transactions on industry applications

DOI

2015

A Novel Dual-Rotor, Axial Field, Fault-Tolerant Flux-Switching Permanent Magnet Machine With High-Torque Performance

IEEE transactions on magnetics

DOI

2014

Material-Efficient Permanent-Magnet Shape for Torque Pulsation Minimization in SPM Motors for Automotive Applications

IEEE transactions on industrial electronics (1982. Print)

DOI

2014

Design and Analysis of Novel 2-Phase Dual Stator Spoke-type Permanent Magnet Machines with High Torque Density

2014

Optimal Rotor Design of Ultra-high Speed Axial Flux Permanent Magnet Motor for Cogging Torque and Torque Ripple Minimization

2014

Optimal Design of a Novel V-Type Interior Permanent Magnet Motor with Assisted Barriers for the Improvement of Torque Characteristics

IEEE transactions on magnetics

DOI

2014

A Study on Design of Novel Asymmetrical Rotor Structures to Improve Torque Characteristics in Interior Permanent Magnet Synchronous Motors

2014

Comparison of 2-Phase Permanent Magnet Machines with Different Stator Configurations Equipped with Phase-group Concentrated-coil Windings

2014

Comparative Study on Novel Dual Stator Radial Flux and Axial Flux Permanent Magnet Motors With Ferrite Magnets for Traction Application

IEEE transactions on magnetics

DOI

2014

Design and Analysis of Novel Dual Rotor Axial Field Flux Switching Permanent Magnet Machines

2013

Design and analysis of a novel dual stator axial flux spoke-type ferrite permanent magnet machine

Annual Conference of the IEEE Industrial Electronics Society

DOI

2013

Torque Improvement of Surface Inset Permanent Magnet Machines by Asymmetrical Rotor Structure

2013

Novel Permanent Magnet Pole Shape for Reducing Cogging Torque and Generating Sinusoidal Back EMF in Surface-mounted PM Motors

2012

Novel Permanent Magnet Shape for Cogging Torque and Torque Ripple Minimization in Surface-Mounted PM Motors