文光华

期刊论文

1. Yanke Xu, Ping Tang, Fuxian Xie, Guanghua Wen, Qiuping Li, Qiang Liu (2026). Investigation on the Mechanism of the Effect of Na 2 CO 3 on Carbon Black Dispersion Behavior in Continuous Casting Mold Flux. steel research international.DOI
2. Aihua Zhao, Zibing Hou, Zhanpeng Xie, Qiuping Li, Qiang Liu, Ping Tang, Guanghua Wen (2026). Study on Thermal Control Stability of Mold Flux Based on Residual Characteristics of Cooling Water Temperature Difference in Continuous Casting Molds. Metallurgical and Materials Transactions B.DOI
3. Yanke Xu, Ping Tang, Bingzhou He, Guanghua Wen, Qiang Liu (2026). Dispersion Behavior of Carbon Black with Different pH Values in Slurry-Based Continuous Casting Mold Flux Preparation. Metallurgical and Materials Transactions B.DOI
4. Qiuping Li, Guanghua Wen, Ping Tang, Zibing Hou, Qiang Liu (2026). Influence of Al 2 O 3 on Element Migration and Crystallization Fractionation in Mold Slag Film by Soret Effect Driven. Journal of the American Ceramic Society.DOI
5. Zhiqiang Peng, Zibing Hou, Shuxian Xu, Ping Tang, Guanghua Wen (2026). Characterization of the formation of slag rims of mold powder during hypo-peritectic steel continuous casting based on full-sectional microstructures. International Journal of Minerals Metallurgy and Materials.DOI
6. 杨浩岩，李秋平，文光华，程朋，陈远清，刘洋（2025）. 镀铜钢丝测量结晶器液渣层厚度的特征及判断方法. 《炼钢》.
7. 程朋，文光华，李秋平，陈远清，李成斌，刘洋（2025）. 结晶器液渣层厚度对大方坯表面质量的影响. 《炼钢》.
8. Qiuping Li, Zerong Duan, Guanghua Wen, Ping Tang, Zibing Hou (2025). Effects of fluorides on NaF pore formation and heat control of mold slag films. Materials Chemistry and Physics.DOI
9. Peng Cheng, Qiuping Li, Zerong Duan, Guanghua Wen, Ping Tang, Zibing Hou, Bingzhou He (2025). Kinetics of MnO2-catalyzed combustion of carbonaceous materials in mold flux. Fuel.DOI
10. Qiuping Li, Peng Cheng, Guanghua Wen, Ping Tang, Zibing Hou, Xinyun Mo (2025). Influence of Al2O3 on Crystallization Behavior of Mold Slag Film Based on Soret Effect. ˜The œminerals, metals & materials series.DOI
11. 侯自兵，郭东伟，彭治强，文光华（2024）. 连铸方坯拉坯方向凝固行为与偏析控制研究进展. 《钢铁》.
12. 李强，张康晖，马建超，文光华，周健，韩富年（2024）. SWRH72BCr钢连铸坯表层网状渗碳体的形成和预防. 《上海金属》.
13. Qiuping Li, Zhe Wang, Zerong Duan, Haoyan Yang, Guanghua Wen, Ping Tang, Zibing Hou (2024). Kinetic Study of NaF Gas Formation During Mold Flux Melting Based on Different Fluorides by Experimental and Computational Methods. steel research international.DOI
14. Fuhang Chen, Guanghua Wen, Peng Cheng, Ping Tang, Zibing Hou (2024). Simulation of the Effect of Flux Layer Thickness on the Melting Behavior of Mold Fluxes Based on the Copper Bath Method. Metallurgical and Materials Transactions B.DOI
15. Qiuping Li, Guanghua Wen, Ping Tang, Yanke Xu (2024). Effects of Fluorides on NaF Vaporization during Mold Powder Melting by Thermodynamic Equilibrium Calculation. steel research international.DOI
16. Qiuping Li, Guanghua Wen, Fuhang Chen, Ping Tang, Zibing Hou, Xinyun Mo (2024). Irregular initial solidification by mold thermal monitoring in the continuous casting of steels: A review. International Journal of Minerals Metallurgy and Materials.DOI
17. Fuhang Chen, Guanghua Wen, Haoyan Yang, Ping Tang, Zibing Hou (2024). Formation of nepheline in the heating process of mould fluxes and its effect on sintering behaviour. Ironmaking & Steelmaking Processes Products and Applications.DOI
18. 侯自兵，郭坤辉，易凯，彭治强，郭中傲，文光华（2023）. 基于大区域碳浓度分布预测的连铸坯低倍组织精细化评级系统. 《第十四届中国钢铁年会论文集—4.炼钢与连铸》.DOI
19. 郭东伟，侯自兵，郭坤辉，张福利，曾子航，文光华（2023）. 连铸方坯中心线凝固行为波动现象及变化规律. 《钢铁》.
20. Zhiqiang Peng, Zibing Hou, Kai Yi, Kunhui Guo, Dongwei Guo, Guanghua Wen (2023). Correlation between longitudinal crack occurrence and mold heat transfer in continuous casting based on process data mining. Journal of Iron and Steel Research International.DOI
21. Fuhang Chen, Guanghua Wen, Ping Tang, Youyu Lu, Haoyan Yang (2023). Effect of Shape Parameters on the Melting Behavior of Hollow Granular Mold Flux for Continuous Casting. Metallurgical and Materials Transactions B.DOI
22. Fei Zhang, Funian Han, Youyu Lu, Guanghua Wen, Liang Yu, Ping Tang, Zibing Hou (2023). Morphology and structure characterization of hollow granule mold powder for continuous casting. Journal of Materials Research and Technology.DOI
23. Funian Han, Guanghua Wen, Ping Tang, Fuhang Chen (2023). Catalytic Effect of Iron Oxide on the Combustion of Carbonaceous Materials in Mold Flux for Continuous Casting. Metallurgical and Materials Transactions B.DOI
24. Fei Zhang, Youyu Lu, Shaoyan Zhu, Funian Han, Guanghua Wen, Ping Tang, Zibing Hou (2023). Mathematical model and numerical investigation of the influence of spray drying parameters on granule sizes of mold powder. Particuology.DOI
25. Fuhang Chen, Guanghua Wen, Ping Tang, Zibing Hou, Youyu Lu, Peng Cheng, Qingmao Kong (2023). Optimization of Mold Powders for High‐Nitrogen Stainless Steel Based on Mold Thermocouple Temperature Variation. steel research international.DOI
26. Fuhang Chen, Guanghua Wen, Ping Tang, Qu Fu (2023). Test Method of Mold Powder Melting Rate Based on Copper Bath and Its Application. ˜The œminerals, metals & materials series.DOI
27. Liang Yu, Shaopeng Gu, Guanghua Wen, Chunhua Ran, Funian Han, Zhe Wang (2023). A Comprehensive Investigation on the Sintering Behavior of CaO–SiO2–CaF2–Al2O3 Slags System. ˜The œminerals, metals & materials series.DOI
28. 侯自兵，柳前，江少奇，彭治强，郭东伟，文光华（2022）. 基于大数据挖掘的低碳钢连铸工艺参数优化. 《钢铁研究学报》.
29. 何鹏，唐萍，漆鑫，付灈，文光华（2022）. 固定功率下铁水搅拌喷吹脱硫桨的直径与转速优化研究. 《炼钢》.
30. 文光华，陈富杭，蒋文波，侯自兵，唐萍（2022）. 连铸结晶器“自适应保护渣”理论及应用. 《工程科学学报》.
31. Fei Zhang, Funian Han, Youyu Lu, Guanghua Wen, Shaopeng Gu, Zhe Wang, Ping Tang (2022). Experimental study and numerical simulation of the influence of ball milling parameters on granule sizes of mold powder. Powder Technology.DOI
32. Funian Han, Guanghua Wen, Fei Zhang, Zhe Wang, Liang Yu (2022). Effect of Microstructure on the Granule Strength of Hollow Granulated Mold Fluxes for Continuous Casting. steel research international.DOI
33. Funian Han, Liang Yu, Guanghua Wen, Youyu Lu, Lu Zhang, Shaopeng Gu (2022). Comprehensive Understanding of the Role of Carbon Black in the Sintering and Melting Behavior of Mold Flux. ISIJ International.DOI
34. Funian Han, Liang Yu, Guanghua Wen, Xingfang Wang, Fei Zhang, Jiaqi Jia, Shaopeng Gu (2022). The effect of composition segregation of mold powder produced by spray granulation on the sintering performance. Journal of Materials Research and Technology.DOI
35. Funian Han, Liang Yu, Guanghua Wen, Jun Guo, Chunhua Ran, Shaopeng Gu (2022). Effect of Na2O on the sintering and melting behavior of CaO-SiO2-CaF2 slag. Journal of Materials Research and Technology.DOI
36. Fuhang Chen, Guanghua Wen, Ping Tang, Liang Yu, Funian Han (2022). The role of carbonaceous materials in mold powder and influence on melting behavior. Journal of Thermal Analysis and Calorimetry.DOI
37. Fei Zhang, Youyu Lu, Funian Han, Guanghua Wen, Shaopeng Gu, Ping Tang (2022). Effect of ball-milling parameters on the rheological properties of mold powder slurry. Ceramics International.DOI
38. 蒋文波，文光华，江婧，唐萍（2021）. 保护渣渣圈形成长大机理及影响因素研究现状. 《连铸》.DOI
39. Liang Yu, Wenbo Jiang, Shaopeng Gu, Ping Tang, Zhe Wang, Guanghua Wen (2021). Investigation in CaO–SiO 2 –CaF 2 –C slags during the sintering and melting process. Ironmaking & Steelmaking Processes Products and Applications.DOI
40. Zhe Wang, Liang Yu, Guanghua Wen, Feng Liu, Fanmao Wang, Mansoor Barati (2021). A combined computational-experimental study on the effect of Na2O on the fluoride volatilization in molten slags. Journal of Molecular Liquids.DOI
41. Zhe Wang, Shuheng Huang, Yue Yu, Guanghua Wen, Ping Tang, Zibing Hou (2021). Comprehensive understanding of the microstructure and volatilization mechanism of fluorine in silicate melt. Chemical Engineering Science.DOI
42. Zhe Wang, Guanghua Wen, Qiang Liu, Ping Tang, Wenbo Jiang, Shuheng Huang (2021). A Comprehensive Investigation on the Microstructure and Thermal Conductivity of CaO-Al2O3 Based Mold Slags: Equilibrium Molecular Dynamics Simulations. Metallurgical and Materials Transactions B.DOI
43. Xiang Li, Ping Tang, Jing Jiang, Qu Fu, Guanghua Wen (2021). Control of Zinc-containing Dust Agglomerates in Basic Oxygen Furnace Flue Gas Cleaning System. ISIJ International.DOI
44. Xiang Li, Ping Tang, Qu Fu, Peng He, Guanghua Wen (2021). Strength and Bonding Mechanism of Nonhydraulic Cementitious Binders: Reutilization of MgO in Basic Oxygen Furnace Dust. Metallurgical and Materials Transactions B.DOI
45. Shaopeng Gu, Liang Yu, Guanghua Wen, Ping Tang, Zhe Wang, Zhubing Gao (2021). Qualitative, Quantitative and Mechanism Research of Volatiles in the Most Commonly Used CaO–SiO2–CaF2–Na2Ο Slag During Casting Process. Transactions of the Indian Institute of Metals.DOI
46. Fuhang Chen, Ping Tang, Guanghua Wen, Liang Yu, Shaopeng Gu (2021). Dissolution Rate and Interfacial Behaviors of Alumina Particle in Molten Slag Studied by Single Hot Thermocouple Technique. ISIJ International.DOI
47. Dachao Fu, Guanghua Wen, Xueqin Zhu, Junli Guo, Ping Tang (2021). Modification for prediction model of austenite grain size at surface of microalloyed steel slabs based on in situ observation. Journal of Iron and Steel Research International.DOI
48. 付达超，文光华，刘耀宗，唐萍（2020）. 10B21冷镦钢连铸小方坯表面异常振痕成因分析及控制. 《连铸》.DOI
49. Shaopeng Gu, Liang Yu, Guanghua Wen, Ping Tang, Zhe Wang, Wenbo Jiang (2020). A Novel Method for Evaluating the Combustion Characteristics of Carbon Materials and Mold Fluxes. steel research international.DOI
50. Zhe Wang, Shuheng Huang, Guanghua Wen, Qiang Liu, Ping Tang (2020). Thermal conductivity prediction and structure-property relationship of CaO-SiO2-Al2O3 ternary system: A combination of molecular dynamics simulations and machine learning. Journal of Molecular Liquids.DOI
51. Shaopeng Gu, Guanghua Wen, Junli Guo, Ping Tang, Qiang Liu (2020). Structure Evolution and Crystallization Behavior of CaO–SiO2-Based Slags with Varying Carbon. Transactions of the Indian Institute of Metals.DOI
52. Shaopeng Gu, Guanghua Wen, Junli Guo, Zhe Wang, Ping Tang, Zibing Hou (2020). Effect of Al2O3 on non-Newtonian property and its relation to structure of mold fluxes during shear stress field at 1573 K. Journal of Non-Crystalline Solids.DOI
53. Xiang Li, Ping Tang, Peng He, Xueqin Zhu, Guanghua Wen (2020). Study on Binder of Cold-Bonded Pellets Containing Basic Oxygen Furnace Dust Based on Hydration Mechanism of Magnesium Potassium Phosphate Cementitious Material. Metallurgical and Materials Transactions B.DOI
54. Zhe Wang, Shuheng Huang, Guanghua Wen, Wenbo Jiang, Ping Tang (2020). Computational Insight into the Thermal Conductivity of CaO-SiO2-Al2O3-MgO-Na2O Melts. Metallurgical and Materials Transactions B.DOI
55. Dongwei Guo, Zibing Hou, Jianghai Cao, Zhongao Guo, Yi Chang, Guanghua Wen (2020). Prediction of maximum carbon element content in continuous casting billets of 82B cord steel based on statistics of extreme values method. Journal of Iron and Steel Research International.DOI
56. Shaopeng Gu, Guanghua Wen, Junli Guo, Zhe Wang, Ping Tang, Qiang Liu (2020). Effect of Shear Stress on Heat Transfer Behavior of Non-Newtonian Mold Fluxes for Peritectic Steels Slab Casting. ISIJ International.DOI
57. Xiang Li, Ping Tang, Xueqin Zhu, Pengpeng Qin, Guanghua Wen (2020). Hydration and Crystallization Behavior of MgO in Cold-Bonded Pellets Containing Basic Oxygen Furnace Dust. Metallurgical and Materials Transactions B.DOI
58. Zhe Wang, Shuheng Huang, Guanghua Wen, Wenbo Jiang, Fuhang Chen, Ping Tang (2020). Effects of temperature on the thermal conductivity of amorphous CaO–SiO 2 –Al 2 O 3 slags: a computational insight. Physical Chemistry Chemical Physics.DOI
59. 周振宇，唐萍，侯自兵，文光华（2019）. w（SiO2）/w（V2O3）对含钒炉渣熔化温度及黏度的影响. 《钢铁研究学报》.DOI
60. 郭军力，文光华，符姣姣，唐萍，谷少鹏（2019）. 基于表面粗糙度对连铸钢碳当量计算方法的判断. 《钢铁》.DOI
61. 郭军力，文光华，符姣姣，唐萍，侯自兵，谷少鹏（2019）. 冷却速率对包晶钢凝固过程中包晶转变收缩的影响. 《金属学报》.
62. 曹江海，侯自兵，郭东伟，常毅，文光华，唐萍（2019）. 模具钢电渣重熔铸坯凝固组织形貌的分形特征. 《钢铁研究学报》.DOI
63. 周振宇，唐萍，周遵传，侯自兵，文光华（2019）. 200t提钒复吹转炉氧枪喷头优化. 《钢铁》.DOI
64. 陈富杭，唐萍，文光华，谷少鹏（2019）. 基于热丝法的保护渣溶解Al 2 O 3 动力学研究新方法. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
65. 侯自兵，郭中傲，郭东伟，曹江海，常毅，文光华（2019）. 利用碳钢铸坯组织灰度图获取C含量分布的方法. 《钢铁研究学报》.DOI
66. 文光华，杨昌霖，唐萍（2019）. 连铸结晶器内渣膜形成及传热的研究现状. 《工程科学学报》.DOI
67. Zhe Wang, Guanghua Wen, Qiang Liu, Shuheng Huang, Ping Tang, Liang Yu (2019). Estimating the thermal conductivity of CaO–Al2O3–SiO2 slags by equilibrium molecular dynamics simulations. Journal of Non-Crystalline Solids.DOI
68. Zhe Wang, Guanghua Wen, Ping Tang, Zibing Hou, Shaopeng Gu (2019). Novel Method for Determining the Interfacial Properties of Melt Slags Based on Single Hot Thermocouple Technique. ISIJ International.DOI
69. Junli Guo, Guanghua Wen, Ping Tang, Jiaojiao Fu, Shaopeng Gu (2019). Analysis of Crack Susceptibility of Peritectic Steels Based on Surface Roughness. steel research international.DOI
70. Shaopeng Gu, Guanghua Wen, Changlin Yang, Junli Guo, Ping Tang, Qiang Liu (2019). Investigation on Thermal Conductivity and Solidification Process of Molten Slags by Using Copper Finger Dip Test. Transactions of the Indian Institute of Metals.DOI
71. Junli Guo, Guanghua Wen (2019). Influence of Alloy Elements on Cracking in the Steel Ingot during Its Solidification. Metals.DOI
72. Zhenyu Zhou, Ping Tang, Zibing Hou, Guanghua Wen (2019). Melting and Crystallization Behaviors of Modified Vanadium Slag for Maintenance of MgO–C Refractory Lining in BOF. ISIJ International.DOI
73. Zhe Wang, Ping Tang, Guanghua Wen, Qiang Liu (2019). Effect of F− Replacing O2− on Crystallization Behavior of CaO–SiO2–Al2O3 Continuous Casting Mold Flux. ISIJ International.DOI
74. Shaopeng Gu, Guanghua Wen, Zequan Ding, Junli Guo, Ping Tang, Qiang Liu (2019). Effect of Bubbles on Crystallization Behavior of CaO–SiO2 Based Slags. Metals.DOI
75. 王哲，唐萍，米晓希，胡泉，陆逸帆，文光华（2018）. CaF2对CaO-SiO2-Al2O3渣系保护渣结晶行为的影响. 《钢铁》.
76. 侯自兵，徐瑞，常毅，曹江海，文光华，唐萍（2018）. 高碳钢连铸方坯拉坯方向偏析C元素分布的时间序列波动特征. 《金属学报》.
77. 朱先飞，文光华，蒲大志（2018）. 连铸保护渣固态渣膜表面粗糙度影响因素研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
78. 侯自兵，曹江海，郭东伟，常毅，文光华，唐萍（2018）. 基于分形理论的模具钢电渣重熔铸坯的凝固组织形貌特征研究. 《2018年（第二十届）全国炼钢学术会议》.
79. 朱先飞，文光华，蒲大志，唐萍，付达超（2018）. 稳态导热下连铸保护渣固态渣膜有效导热系数的研究. 《连铸》.
80. Dazhi Pu, Guanghua Wen, Dachao Fu, Ping Tang, Junli Guo (2018). Study of the Effect of Carbon on the Contraction of Hypo-Peritectic Steels during Initial Solidification by Surface Roughness. Metals.DOI
81. Shaopeng Gu, Guanghua Wen, Zequan Ding, Ping Tang, Qiang Liu (2018). Effect of Shear Stress on Isothermal Crystallization Behavior of CaO-Al2O3-SiO2-Na2O-CaF2 Slags. Materials.DOI
82. Zhenyu Zhou, Ping Tang, Zibing Hou, Guanghua Wen (2018). Investigation of the End-Point Temperature Control Based on the Critical Temperature of Vanadium Oxidation During the Vanadium Extraction Process in BOF. Transactions of the Indian Institute of Metals.DOI
83. Junli Guo, Guanghua Wen, Dazhi Pu, Ping Tang (2018). A Novel Approach for Evaluating the Contraction of Hypo-Peritectic Steels during Initial Solidification by Surface Roughness. Materials.DOI
84. 黄挺，文光华，白彬文，唐萍，高金星（2017）. 连铸保护渣中离子浸出机制及其对水质的影响. 《钢铁研究学报》.
85. 赵国际，文光华，盛光敏（2017）. 快速凝固对Sn-8Zn-3Bi合金特性及高温时效钎料/铜焊点结构演变的影响（英文）. Transactions of Nonferrous Metals Society of China.
86. 侯自兵，郭东伟，曹江海，常毅，唐萍，文光华（2017）. 过热度对82B帘线钢连铸方坯碳偏析程度的影响及机理研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
87. 苗胜田，文光华，唐萍（2017）. 无氟含钛保护渣表面粗糙度研究. 《山西冶金》.
88. 孙启浩，文光华，朱先飞，唐萍（2017）. 保护渣固态渣膜传导及辐射耦合传热特性研究. 《连铸》.
89. 唐萍，高金星，文光华（2017）. 连铸结晶器保护渣研究进展及趋势. 《炼钢》.
90. 苗胜田，岳杰，文光华，唐萍（2017）. 无氟连铸结晶器保护渣结晶矿相研究. 《山西冶金》.
91. 余亮，文光华，朱先飞，唐萍（2017）. 基于差热分析对CaO-SiO2-Al2O3系保护渣结晶动力学的研究. 《炼钢》.
92. 贾成橙，唐萍，米晓希，文光华，刘强，侯自兵（2017）. 高温激光共聚焦显微镜在熔渣与钢润湿性能研究中的应用. 《炼钢》.
93. 余亮，文光华，唐萍，杨昌霖（2017）. 利用TEC方法定量分析连铸保护渣结晶比. 《东北大学学报(自然科学版)》.
94. Changlin Yang, Guanghua Wen, Xianfei Zhu, Ping Tang (2017). A multivariate linear regression method based on an improved rate equation to determine parameters of nonisothermal crystallization kinetics. Thermochimica Acta.DOI
95. Jiang Liu, Guanghua Wen, Ping Tang (2017). Study of Ferrite During Refinement of Prior Austenite Grains in Microalloyed Steel Continuous Casting. Metallurgical and Materials Transactions B.DOI
96. Changlin Yang, Guanghua Wen, Qihao Sun, Ping Tang (2017). Investigation of the coupled conductive and radiative heat transfer of molten slag in a cylindrical enclosure based on the zonal method. International Journal of Heat and Mass Transfer.DOI
97. Changlin Yang, Guanghua Wen, Xianfei Zhu, Ping Tang (2017). In situ observation and numerical simulation of bubble behavior in CaO-SiO2 based slag during isothermal and nonisothermal processes. Journal of Non-Crystalline Solids.DOI
98. Changlin Yang, Guanghua Wen, Qihao Sun, Ping Tang (2017). Evolution of Temperature and Solid Slag Film During Solidification of Mold Fluxes. Metallurgical and Materials Transactions B.DOI
99. 刘江，文光华，唐萍（2016）. 微合金钢连铸坯横裂纹研究现状. 《钢铁研究学报》.
100. 奚超超，文光华，刘江，许松，孙兴洪（2016）. KR铁水脱硫罐内流场优化模拟. 《炼钢》.
101. 高金星，文光华，黄挺，孙启浩，唐萍，刘强（2016）. CaO-SiO2-Al2O3渣系连铸保护渣结构的拉曼光谱研究. 《光谱学与光谱分析》.
102. 付孝锦，文光华（2016）. 高铝钢连铸结晶器保护渣研究概况. 《内江师范学院学报》.
103. Guoji Zhao, Guanghua Wen, Guangmin Sheng, Yanxia Jing (2016). Effects of rapid solidification process and 0.1%Pr/Nd addition on characteristics of Sn−9Zn solder alloy and interfacial properties of Cu/solder/Cu joints. Journal of Central South University.DOI
104. 潘银虎，文光华，周海，唐萍，侯自兵（2016）. 重钢80t转炉终点炉渣成分控制研究. 《炼钢》.
105. 文光华，许松，奚超超，刘江，唐萍，孙兴洪（2016）. KR法铁水脱硫剂利用技术研究进展. 《炼钢》.
106. 付孝锦，文光华，唐萍（2016）. w（CaO）/w（Al2O3）对高铝TRIP钢保护渣熔化及流动性能的影响. 《炼钢》.
107. Jinxing Gao, Guanghua Wen, Ting Huang, Binwen Bai, Ping Tang, Qiang Liu (2016). Effect of slag-steel reaction on the structure and viscosity of CaO-SiO2-based mold flux during high-Al steel casting. Journal of Non-Crystalline Solids.DOI
108. Jinxing Gao, Guanghua Wen, Ting Huang, Binwen Bai, Ping Tang, Qiang Liu (2016). Effect of Al Speciation on the Structure of High‐Al Steels Mold Fluxes Containing Fluoride. Journal of the American Ceramic Society.DOI
109. Jinxing Gao, Guanghua Wen, Ting Huang, Ping Tang (2016). The Structure and the Crystallization Behaviour of the CaO‐SiO 2 ‐Al 2 O 3 ‐Based Mold Flux for High‐A1 Steels Casting.DOI
110. Changlin Yang, Guanghua Wen, Ping Tang, Chaochao Xi, Qihao Sun (2016). Quantification of crystalline fraction of solid slag film using X-ray powder diffraction. Powder Diffraction.DOI
111. Jinxing Gao, Guanghua Wen, Ting Huang, Ping Tang, Qiang Liu (2016). Effects of the composition on the structure and viscosity of the CaO–SiO2-based mold flux. Journal of Non-Crystalline Solids.DOI
112. Jinxing Gao, Guanghua Wen, Ting Huang, Ping Tang (2016). The Structure and The Crystallization Behaviour of The CaO-SiO2-Al2O3-Based Mold Flux for High-Al Steels Casting. Springer eBooks.DOI
113. 王伟，侯自兵，陈晗，邓刚，文光华，唐萍（2015）. CLSM-HT实验钢样凝固组织形貌的特征研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
114. 唐萍，罗琳青，文光华，刘江（2015）. 基于激光共聚焦显微镜模拟微合金钢连铸过程中第二相的析出行为. 《工程科学学报》.
115. 黎建全，周明佳，李云峰，侯自兵，唐萍，文光华（2015）. 连铸二冷模式对微合金钢板坯角部表层组织的影响. 《炼钢》.
116. 文光华，高金星，陈力源，杨昌霖，唐萍，梅峰，施春月（2015）. 低氟含钛结晶器保护渣结晶及传热性能研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
117. 周振宇，唐萍，文光华，刘强（2015）. 基于热丝法对CaO-SiO2-Al2O3保护渣结晶性能与凝固分数的研究. 《东北大学学报(自然科学版)》.
118. 高金星，文光华，唐萍，陈力源，杨昌霖（2015）. Al2O3对连铸保护渣中氟浸出的影响. 《工程科学学报》.
119. 樊安源，文光华，李敬想，唐萍（2015）. 钢包长水口内小气泡形成的研究现状与展望. 《炼钢》.
120. 文光华，王哲，张铨，胡泉，陆逸帆，杨昌霖（2015）. 基于DSC的连铸保护渣固体渣膜结晶比定量化分析. 《重庆大学学报》.
121. Jiang Liu, Guanghua Wen, Yunfeng Li, Ping Tang (2015). A Model Estimating the Slab Corner Transverse Cracking Susceptibility of Microalloyed Steel Based on Microstructure. MATERIALS TRANSACTIONS.DOI
122. Changlin Yang, Guanghua Wen, Ping Tang (2015). Non‐Isothermal Crystallization Kinetics of Mold Fluxes Containing Li2O for High Aluminum Steel Casting. steel research international.DOI
123. Jiang Liu, Guanghua Wen, Yunfeng Li, Ping Tang, Linqing Luo (2015). Effect of γ→α Phase Transformation on Refining Austenite Grains of Microalloyed Steel in Continuous Casting by Simulation. High Temperature Materials and Processes.DOI
124. Jinxing Gao, Guanghua Wen, Qihao Sun, Ping Tang, Qiang Liu (2015). The Influence of Na2O on the Solidification and Crystallization Behavior of CaO-SiO2-Al2O3-Based Mold Flux. Metallurgical and Materials Transactions B.DOI
125. Lejun Zhou, Wanlin Wang, Boxun Lu, Guanghua Wen, Jian Jun Yang (2015). Effect of basicity and B2O3 on viscosity, melting and crystallization behaviors of low fluorine mold fluxes for casting medium carbon steels. Metals and Materials International.DOI
126. 卢叶，唐萍，文光华，彭情亮，刘丙岗（2014）. 透气砖布置和吹氩流量对钢包内钢液流动行为的影响. 《钢铁研究学报》.
127. 刘江，文光华，唐萍，李云峰（2014）. 微合金钢初始凝固中奥氏体开始长大的温度. 《东北大学学报(自然科学版)》.
128. 刘奇，谭文奉，周振宇，黄雅萍，唐萍，文光华（2014）. CaO/Al2O3比对高铝钢连铸保护渣凝固结晶行为的影响. 《过程工程学报》.
129. 陈树军，唐萍，程军猛，文光华，施春月，阮晓明（2014）. IF钢铸坯表层大型夹杂物分析. 《第十八届（2014年）全国炼钢学术会议论文集——S01：大会报告篇》.
130. Jinxing Gao, Guanghua Wen, Qi Liu, Wenfeng Tan, Ping Tang (2014). Effect of Al2O3 on the fluoride volatilization during melting and ion release in water of mold flux. Journal of Non-Crystalline Solids.DOI
131. Yunfeng Li, Guanghua Wen, Ping Tang, Jianquan Li, Cheng-li Xiang (2014). Effect of Slab Subsurface Microstructure Evolution on Transverse Cracking of Microalloyed Steel during Continuous Casting. Journal of Iron and Steel Research International.DOI
132. Liangyu Chen, Guanghua Wen, C. L. Yang, Feng Jiao Mei, Chunbao Shi, Ping Tang (2014). Development of low-fluoride and titanium-bearing mould fluxes for medium carbon peritectic steel slab casting. Ironmaking & Steelmaking Processes Products and Applications.DOI
133. Zibing Hou, Guanghua Wen, Ping Tang, Guoguang Cheng (2014). Periodicity of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet by Using Singular Spectrum Analysis. Metallurgical and Materials Transactions B.DOI
134. Xiaoxiao Fu, Guanghua Wen, Qiang Liu, Ping Tang, LI Ju-zhong, Wei Li (2014). Development and Evaluation of CaO–SiO 2 Based Mould Fluxes for Casting High Aluminum TRIP Steel. steel research international.DOI
135. Y. Li, Guanghua Wen, Lan E Luo, Junming Liu, Ping Tang (2014). Study of austenite grain size of microalloyed steel by simulating initial solidification during continuous casting. Ironmaking & Steelmaking Processes Products and Applications.DOI
136. 彭情亮，唐萍，文光华，刘炳宇，李具中（2013）. LF热态钢渣循环利用炉渣成分控制. 《钢铁》.
137. 刘奇，周振宇，谭文奉，黄雅萍，唐萍，文光华（2013）. CaO/Al 2 O 3 比对高铝钢连铸保护渣凝固结晶行为的影响. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
138. 陈树军，唐萍，文光华，阮晓明，施春月（2013）. 电磁制动对IF钢铸坯表层夹杂物的影响. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
139. 刘丙岗，文光华，唐萍，罗琳青，阮晓明，施春月（2013）. IF钢铸坯皮下小气泡分布. 《工程科学学报》.
140. 张宇斌，文光华，于雄，唐萍（2013）. 高铝奥氏体无磁钢20Mn23Al2V板坯连铸结晶器保护渣的研究. 《特殊钢》.
141. Xiaoxiao Fu, Guanghua Wen, Ping Tang, Qiwei Liu, Zongyan Zhou (2013). Effects of CaO/Al 2 O 3 ratio on crystallisation behaviour of CaO–Al 2 O 3 based mould fluxes for high aluminium TRIP steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
142. Qiwei Liu, Guanghua Wen, J. Li, Xiaoxiao Fu, Ping Tang, W. Li (2013). Development of mould fluxes based on lime–alumina slag system for casting high aluminium TRIP steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
143. Wei Luo, Bo Yan, X. Lu, Guanghua Wen (2013). Improvement of water slot design for beam blank casting mould. Ironmaking & Steelmaking Processes Products and Applications.DOI
144. 罗伟，严波，熊跃兴，文光华，徐海伦（2012）. 异型坯结晶器与铸坯热力耦合数值模拟. 《材料科学与工艺》.
145. 郭秋实，文光华，程维玮，王端军，孔凡杰（2012）. 齿轮钢矩形坯皮下裂纹的成因. 《钢铁研究学报》.
146. 毕经汉，唐萍，文光华，丁铃，苏刚（2012）. 异钢种连浇工艺参数对交接坯长度的影响. 《钢铁钒钛》.
147. 徐海伦，文光华，孙维，汪开忠，马春武（2012）. 连铸异型坯结晶器铜板冷却水缝优化设计. 《炼钢》.
148. 罗伟，严波，熊跃兴，文光华，徐海伦（2012）. 连铸异型坯凝固过程的三维仿真分析. 《系统仿真学报》.DOI
149. 别程程，丁琳，苏刚，文光华，毕经汉（2012）. 重钢新区3#连铸机衔接坯预测模型的建立和应用. 《2012年全国炼钢—连铸生产技术会》.
150. 苗胜田，文光华，唐萍（2012）. 连铸结晶器内含钛无氟保护渣固态渣膜再结晶研究. 《特殊钢》.
151. Jiao Li, Guanghua Wen, Ping Tang, Mingmei Zhu, Jianjun Gao, Liu Hai-lan (2012). Fluid Flow and Inclusion Motion in a Multi-Heat Teeming Tundish for Heavy Steel Ingot. Journal of Iron and Steel Research International.DOI
152. Fanjun Ma, Guanghua Wen, Wanlin Wang (2012). Effect of Cooling Rates on the Second‐Phase Precipitation and Proeutectoid Phase Transformation of a Nb–Ti Microalloyed Steel Slab. steel research international.DOI
153. Guanghua Wen, Yongfeng Huang, Ping Tang, Mingmei Zhu (2012). Improvement of tundish shape and optimization of flow control devices for sequence casting heavy steel ingots. International Journal of Minerals Metallurgy and Materials.DOI
154. 李云峰，文光华，唐萍，黎建全，张君详，向成礼（2011）. 冷却模式对板坯连铸微合金钢角部表层组织的影响. 《第八届（2011）中国钢铁年会论文集》.
155. 罗伟，严波，熊跃兴，文光华，徐海伦（2011）. 异型坯连铸结晶器传热行为的数值模拟研究. 《钢铁》.
156. 杨波，唐萍，文光华，于雄（2011）. 高铝TRIP钢连铸过程中保护渣中Al2O3含量的变化对渣膜传热的影响. 《中国有色金属学报》.
157. 孙维，汪开忠，文光华，徐海伦，汤寅波，唐萍（2011）. 异型坯连铸二冷工艺优化研究. 《钢铁》.
158. 于雄，文光华，唐萍，王欢（2011）. B2O3对高铝钢连铸保护渣理化性能的影响. 《重庆大学学报》.
159. 郭秋实，文光华，唐萍，李菊艳（2011）. 铸坯表层原奥氏体晶粒大小预测. 《连铸》.
160. 文光华，黄永锋，唐萍，祝明妹（2011）. 钢包长水口形状对中间包内钢液流动特性的影响. 《重庆大学学报》.
161. 杨波，唐萍，文光华，朱辛白，于雄（2011）. 结晶器保护渣渣膜结构的模拟研究. 《过程工程学报》.
162. 翟卫江，胡道峰，王端军，张悦，唐萍，文光华（2011）. 南钢45号钢铸坯质量控制研究. 《连铸》.
163. 黄永锋，文光华，唐萍，祝明妹，张宁（2011）. 中间包湍流控制器结构优化的水力学模拟. 《炼钢》.
164. 李菊艳，文光华，唐萍，黎建全，向成礼（2011）. 攀钢板坯连铸机不同断面铸坯角部横裂纹分析. 《工程科学学报》.
165. Wei Luo, Bo Yan, Yixin Xiong, Guanghua Wen, Heng Xu (2011). Improvement to secondary cooling scheme for beam blank continuous casting. Ironmaking & Steelmaking Processes Products and Applications.DOI
166. J Li, Guanghua Wen, Ping Tang, Minghui Zhu (2011). Study on geometric dimension design of multiheat teeming tundish for heavy steel ingots. Ironmaking & Steelmaking Processes Products and Applications.DOI
167. Zuotai Zhang, Guanghua Wen, Yingyi Zhang (2011). Crystallization behavior of F-free mold fluxes. International Journal of Minerals Metallurgy and Materials.DOI
168. Xiong Yu, Guanghua Wen, Ping Tang, Fanjun Ma, Huan Wang (2011). Behavior of Mold Slag Used for 20Mn23Al Nonmagnetic Steel During Casting. Journal of Iron and Steel Research International.DOI
169. 杜亚伟，文光华，唐萍，张建春，汪宁（2010）. 基于ANSYS的模铸高碳钢凝固过程温度场数值模拟. 《材料科学与工程学报》.
170. 王欢，唐萍，文光华，林小琴，任广平（2010）. 碳质材料对结晶器保护渣熔融特性的影响. 《钢铁研究学报》.
171. 张宁，唐萍，文光华，祝明妹（2010）. 圆筒形布流系统对双辊薄带连铸熔池的影响. 《热加工工艺》.
172. 李菊艳，文光华，唐萍，郭秋实（2010）. Q345B钢板坯角部横裂纹成因分析. 《钢铁钒钛》.
173. 黄光东，文光华，唐萍，祝明妹，黎建全，朱义才（2010）. 方圆坯六流中间包控流装置的数值模拟与现场试验. 《钢铁钒钛》.
174. 张宁，唐萍，祝明妹，文光华，马范军（2010）. 镁合金双辊薄带连铸机布流系统研究. 《材料导报》.
175. 韦江林，唐萍，文光华，祝明妹，高建军，刘海澜（2010）. VD炉钢包底吹氩的物理模拟. 《钢铁研究》.
176. 王欢，唐萍，文光华，于雄（2010）. 高铝钢非反应性连铸保护渣的研究. 《钢铁钒钛》.
177. Hai-lun Xu, Guanghua Wen, Wei Sun, Kaizhong Wang, Bo Yan (2010). Analysis of thermal behavior for beam blank continuous casting mold. Journal of Iron and Steel Research International.DOI
178. Fanjun Ma, Guanghua Wen, Ping Tang, Guodong Xu, Feng Mei, Wanlin Wang (2010). Effect of Cooling Rate on the Precipitation Behavior of Carbonitride in Microalloyed Steel Slab. Metallurgical and Materials Transactions B.DOI
179. Z.T. Zhang, Guanghua Wen, Junlin Liao, S. Sridhar (2010). Observations of Crystallization in Mold Slags with Varying Al2O3/SiO2 Ratio. steel research international.DOI
180. Xin Xia Qi, Guanghua Wen, Ping Tang (2010). Viscosity and Viscosity Estimate Model of Fluoride-Free and Titanium-Bearing Mold Fluxes. Journal of Iron and Steel Research International.DOI
181. Xiong Yu, Guanghua Wen, Ping Tang, Bo Yang (2010). Characteristics of heat flux through slag film of mold slag used for high Al-TRIP steel casting. Journal of Iron and Steel Research International.DOI
182. Heng Xu, Guanghua Wen, Wenwen Sun, K. Z. Wang, Bo Yan, Wei Luo (2010). Thermal behaviour of moulds with different water channels and their influence on quality in continuous casting of beam blanks. Ironmaking & Steelmaking Processes Products and Applications.DOI
183. F. J. Ma, Guanghua Wen, Pingmei Tang, Xiang‐Long Yu, J. Y. Li, Guodong Xu, F. Mei (2010). In situ observation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
184. H. G. Ryu, Z. T. Zhang, Jung‐Wook Cho, Guanghua Wen, S. Sridhar (2010). Crystallization Behaviors of Slags through a Heat Flux Simulator. ISIJ International.DOI
185. 马范军，文光华，唐萍，徐国栋，梅峰（2009）. 冷却速度对含铌、钛微合金钢铸坯表层组织结构的影响. 《工程科学学报》.
186. 职建军，文光华（2009）. 厚板连铸结晶器保护渣性能评估. 《第七届(2009)中国钢铁年会论文集（上）》.
187. 孙维，汪开忠，文光华，唐萍，刘慧（2009）. 耐候钢异型坯连铸结晶器保护渣性能优化研究. 《钢铁》.
188. 吴浩方，陈志平，文光华，徐海伦（2009）. 板坯连铸结晶器内水口结瘤对钢液流动行为的影响. 《钢铁》.
189. 陈志平，朱苗勇，文光华，江中块（2009）. 连铸板坯浸入式水口吹氩工艺研究. 《钢铁》.
190. 余杰，唐萍，杨浩，文光华，胡道峰，张悦，马军，马俊（2009）. 45#钢小方坯铸坯质量控制研究. 《钢铁钒钛》.
191. F. J. Ma, Guanghua Wen, Ping Tang, X. Yu, J. Y. Li, Guodong Xu, F. Mei (2009). Causes of transverse corner cracks in microalloyed steel in vertical bending continuous slab casters. Ironmaking & Steelmaking Processes Products and Applications.DOI
192. X. Yu, Guanghua Wen, Ping Tang, Haowei Wang (2009). Investigation on viscosity of mould fluxes during continuous casting of aluminium containing TRIP steels. Ironmaking & Steelmaking Processes Products and Applications.DOI
193. Hui Liu, Guanghua Wen, Ping Tang (2009). Crystallization Behaviors of Mold Fluxes Containing Li2O Using Single Hot Thermocouple Technique. ISIJ International.DOI
194. 徐海伦，文光华，唐萍，陈志平，韩乃川（2008）. 板坯连铸结晶器内吹氩参数优化. 《钢铁研究学报》.
195. 顾武安，唐萍，文光华，祝明妹，苍大强（2008）. 大方坯连铸四孔浸入式水口的应用研究. 《钢铁》.
196. Xin Xia Qi, Guanghua Wen, Ping Tang (2008). Investigation on heat transfer performance of fluoride-free and titanium-bearing mold fluxes. Journal of Non-Crystalline Solids.DOI
197. Guanghua Wen, Hui Liu, Ping Tang (2008). CCT and TTT diagrams to characterize crystallization behavior of mold fluxes. Journal of Iron and Steel Research International.DOI
198. Ping Tang, Chu-shao Xu, Guanghua Wen, Zhao Yan-hong, Xin Xia Qi (2008). Heat flux through slag film and its crystallization behavior. Journal of Iron and Steel Research International.DOI
199. Ping Tang, Yangyang Yu, Guanghua Wen, Mingmei Zhu, Liang Zhou, Yiju Long, Qing Liang (2008). Study on the optimization of the combined blown converter process in Chongqing Iron and Steel Company. International Journal of Minerals Metallurgy and Materials.DOI
200. Zuotai Zhang, Guanghua Wen, Ping Tang, Seetharaman Sridhar (2008). The Influence of Al2O3/SiO2 Ratio on the Viscosity of Mold Fluxes. ISIJ International.DOI
201. 余亮，唐萍，文光华，胡兵，何维祥（2007）. 重钢80t钢包烘烤制度的研究. 《2007中国钢铁年会论文集》.
202. 顾武安，杨文中，杨素波，文光华（2007）. 攀钢六流大方坯连铸中间包控流装置研制和应用研究. 《2007中国钢铁年会》.
203. 罗高强，唐萍，文光华，陈志平，倪修华（2007）. 梅山2号板坯连铸低碳钢铸坯质量研究. 《钢铁》.
204. Mingmei Zhu, Guanghua Wen, Ping Tang, Yufeng Wang (2007). Dissymmetric flow phenomenon in a multistrand tundish. International Journal of Minerals Metallurgy and Materials.DOI
205. Yufeng Wang, Guanghua Wen, Ping Tang, Mingmei Zhu, Yuanqing Chen, Weizhao Song (2007). Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish. International Journal of Minerals Metallurgy and Materials.DOI
206. Guanghua Wen, Seetharaman Sridhar, Ping Tang, Xin Qi, Yongqing Liu (2007). Development of Fluoride-free Mold Powders for Peritectic Steel Slab Casting. ISIJ International.DOI
207. Hiroyuki Matsuura, Cong Wang, Guanghua Wen, Seetharaman Sridhar (2007). The Transient Stages of Inclusion Evolution During Al and/or Ti Additions to Molten Iron. ISIJ International.DOI
208. 王宇峰，文光华，漆鑫，唐向东，杨素波（2006）. 板坯中间包底部高度及控流装置设计. 《2006中国金属学会青年学术年会论文集》.
209. 王宇峰，文光华，唐萍，宋维兆，王新成（2006）. 弹簧钢洁净化生产工艺研究. 《钢铁》.
210. 陈远清，文光华，祝明妹，唐萍，杨素波，张龙超，解明科（2006）. 四流大方坯连铸中间包的物理模拟研究. 《钢铁钒钛》.
211. 杜恒科，文光华，唐萍（2006）. 宽板坯结晶器保护渣的开发. 《钢铁钒钛》.
212. 刘永庆，唐萍，文光华，张明熹（2006）. 结晶器含钛无氟保护渣的粘度和熔化特性. 《中国有色金属学报》.
213. 黄社清，茆勇，潘远望，文光华（2006）. CSP中间包水模实验优化研究. 《钢铁研究》.
214. 刘著，唐萍，文光华，祝明妹（2006）. B2O3在稀土钢连铸保护渣中作用机制的研究. 《稀有金属》.
215. 苗胜田，文光华，唐萍，张明熹（2006）. 无氟连铸结晶器保护渣的结晶性能. 《钢铁研究学报》.
216. 贾碧，施金良，文光华，唐萍，吴云君，贺丰雷，李家庆（2006）. 基于热丝法的连铸保护渣的结晶过程. 《钢铁研究学报》.
217. 祝明妹，文光华，唐萍，顾武安，杨素波（2006）. 大方坯连铸结晶器四孔伸入式水口研究. 《2006中国金属学会青年学术年会论文集》.
218. 靳星，文光华，唐萍，齐彦峰（2006）. 连铸二冷喷嘴喷雾特性测试系统开发. 《2006中国金属学会青年学术年会论文集》.
219. 杜恒科，文光华，唐萍，姚永宽，耿建林，王桂玲，张悦（2006）. 宽板坯结晶器中碳钢保护渣研究. 《中国冶金》.
220. 林国强，唐萍，孔凡杰，漆鑫，王金干，文光华（2005）. 南钢方坯连铸结晶器振动参数优化的研究. 《钢铁》.
221. 文光华，唐萍，李书成，何宇明，赵正平，张建国（2005）. 无氟板坯连铸结晶器保护渣的研究. 《钢铁》.
222. 唐萍，文光华，徐楚韶，洪兵雄，陈国江，王进步，李伟峰（2005）. 集装箱板钢薄板坯连铸用结晶器保护渣. 《钢铁研究学报》.
223. 薛伟锋，文光华，唐萍，何宇明，陈文满，赵正平（2005）. 板坯连铸结晶器内保护渣模拟方法的研究. 《钢铁研究》.
224. 孔凡杰，林国强，李祥，王金干，唐萍，漆鑫，文光华（2005）. 南(京)钢电炉厂小方坯表面质量的研究. 《钢铁研究》.
225. 文光华，梅峰，胡道峰，马骏，马军，李翔（2005）. 南钢板坯三角区裂纹形成因素分析及控制. 《钢铁》.
226. 唐萍，文光华，漆鑫，陈浩，周建，黄鼎，龙贻菊，胡兵，潘永忠（2004）. LF埋弧精炼渣的研究. 《钢铁》.
227. 唐萍，文光华，薛伟锋，熊银成，龙贻菊，何宏侠，赵知祥（2004）. 铁水喷粉脱硫工艺参数优化的研究. 《钢铁研究》.
228. 苏振江，文光华，唐萍，漆鑫，顾武安，赵克文，宋国菊（2004）. 多流中间包内钢液流动规律模拟研究. 《钢铁钒钛》.
229. 文光华，唐萍，韩志伟，梅峰，阮晓明，张立，李皓（2003）. 宝钢1930板坯铸机二冷喷嘴布置方式对铸坯质量的影响. 《钢铁》.
230. 梅峰，文光华，唐萍，贾宁晨，胡道峰，李翔，马军，张悦（2003）. 南钢板坯三角区裂纹的成因及分析. 《钢铁钒钛》.
231. 唐萍，文光华，王中丙，范胜标，张振彪，李书成，李红（2003）. CSP薄板坯连铸低碳钢结晶器保护渣的研究. 《钢铁》.
232. 文光华，唐萍，祝明妹，苏振江，顾武安，赵克文，宋国菊（2002）. 六流大方坯连铸中间包选型和控流装置研究. 《钢铁钒钛》.
233. 文光华，唐萍，苏振江，顾武安，赵克文，宋国菊（2002）. 大方坯连铸结晶器伸入式水口结构类型研究. 《钢铁钒钛》.
234. 唐萍，文光华，薛伟峰，龙怡菊，熊银成，何宏侠（2002）. 重钢铁水喷粉脱硫工艺参数研究. 《重庆金属学会钢铁年会》.
235. 文光华，祝明妹，何俊范，丁培道，王纪元（2001）. 双辊薄带连铸熔池液面波动及流体混合特征模拟研究. 《2001中国钢铁年会论文集（上卷）》.
236. 韩志伟，唐萍，文光华（2001）. 板坯连铸二冷计算机仿真通用软件的开发及应用. 《2001中国钢铁年会论文集（上卷）》.
237. 文光华，祝明妹，何俊范，李刚，韩志伟，丁培道（2000）. 双辊薄带连铸熔池液面波动物理模拟. 《金属学报》.
238. 马范军，文光华，李刚（2000）. 板坯连铸结晶器内钢液流动数值模拟. 《金属学报》.
239. 唐萍，文光华，熊银成，朱斌，龙怡菊，赵知祥，何宏侠（2000）. 镁包芯丝铁水脱硫研究. 《钢铁钒钛》.
240. 马范军，文光华，李刚，赵克文，宋国菊，王军，赵启成（1999）. 攀钢板坯连铸结晶器内流场的水力学模拟研究. 《钢铁钒钛》.
241. 文光华，迟景灏，王谦，王雨，李刚，何宇明，付彬，陈文满，朱斌（1999）. 亚包晶钢连铸板坯表面纵裂纹的研究. 《钢铁钒钛》.
242. 文光华，迟景灏，王谦，王雨，李刚，何宇明，付彬，陈文满，朱斌（1999）. 中碳亚包晶钢连铸板坯表面质量的研究. 《1999中国钢铁年会论文集（上）》.
243. 文光华（1998）. 薄板坯连铸结晶器内腔形状的优化. 《钢铁》.
244. 文光华，王水波，赵克文（1998）. 攀钢板坯连铸机二冷喷嘴热态特性的测定. 《钢铁钒钛》.
245. 文光华，迟景灏，黄云飞（1997）. 连铸机二冷喷嘴冷态和热态特性的实验研究. 《钢铁研究》.
246. 李刚，文光华，殷汝军，邵明天（1997）. 板坯连铸结晶器浸入式水口水力学模拟研究. 《1997中国钢铁年会论文集（下）》.
247. 文光华，李刚，张建春（1997）. 高速板坯连铸结晶器内钢液流动及传热过程的数值模拟. 《1997中国钢铁年会论文集（下）》.
248. 文光华，高家锐（1992）. 间歇式炉使用高速燃烧器的炉内传热机理研究. 《钢铁》.

书籍章节

1. Zhe Wang, Guanghua Wen, Wenbo Jiang, Ping Tang, Shuheng Huang (2021). In-Situ Quantitative Study of Heat Transfer Performance of Mold Flux by Using Double Hot Thermocouple Technology. ˜The œminerals, metals & materials series.DOI
2. Xiang Li, Ping Tang, Xueqin Zhu, Pengpeng Qin, Guanghua Wen (2020). Study on Cracking Control of Cold Bonded Pellets Containing Converter Dust Based on Nonhydraulic Hardening Principle. ˜The œminerals, metals & materials series.DOI
3. Fuhang Chen, Ping Tang, Guanghua Wen, Shaopeng Gu (2020). A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique. ˜The œminerals, metals & materials series.DOI
4. Zhe Wang, Guanghua Wen, Ping Tang, Zibing Hou (2019). A Novel Method of Surface Tension Test for Melt Slags Based on Hot Thermocouple Technique. ˜The œminerals, metals & materials series.DOI