丰镇平

期刊论文

1. 杨星，龙泽，梁云山，张梦馨，丰镇平（2026）. 燃气轮机透平替代冷却工质：过去、现在与未来. 《推进技术》.
2. 汪翔宇，陈显赟，刘梦琪，丰镇平（2026）. 机动载荷下振动对涡轮叶尖气热特性影响. 《航空学报》.
3. 肖俊峰，闫昱彤，高松，何伟，林梅，王秋旺，丰镇平（2026）. 多形态狭缝型槽道结构的叶片前缘气膜冷却特性研究. 《西安交通大学学报》.
4. 王志多，王志豪，张文豪，李若诚，汪翔宇，丰镇平（2026）. 燃烧室出流影响下的高压涡轮气热机理及设计研究综述. 《推进技术》.
5. 梁云山，龙泽，张梦馨，杨星，丰镇平（2026）. 带肋通道中纳米气溶胶相变传热特性及强化机理研究. 《工程热物理学报》.
6. 陶永，张韦馨，刘钊，丰镇平（2026）. 涡轮叶顶气热性能智能预测与优化方法. 《工程热物理学报》.
7. 阮有钢，丰镇平（2026）. 气膜冷却气热耦合伴随优化方法研究. 《推进技术》.
8. 汪翔宇，许瑶，徐孟娟，刘钊，丰镇平（2026）. 张角凹坑气膜孔对双层壁气膜冷却特性的影响. 《西安交通大学学报》.
9. Mengxin Zhang, Ze Long, Chaozong Hu, Yunshan Liang, Xing Yang, Feng Zhenping (2026). Aero-thermal comparisons of advanced coolant mediums in a turbine double-wall-cooled vane. Applied Thermal Engineering.DOI
10. Yi Wang, Jialong Li, Qingsong Hu, Xinyu Lv, Xiangyu Wang, Zhenping Feng (2026). TPMS-enabled compound cooling design for enhanced conjugate heat transfer in turbine vane applications. International Communications in Heat and Mass Transfer.DOI
11. Chenxi Lu, Zhao Liu, Yixuan Lu, Zhenping Feng (2026). Aerothermal and film cooling performance of non-axisymmetric endwall contoured by pressure distribution: An experimental and numerical investigation. International Journal of Heat and Fluid Flow.DOI
12. Ruocheng Li, Zi Wang, Wenhao Zhang, Zi Wang, Bei Zhang, Liangliang Wang, X B Wang, Zhenping Feng (2026). Improving film cooling performance of turbine nozzle guide vane leading-edge using conical holes under non-uniform inflow conditions. International Communications in Heat and Mass Transfer.DOI
13. Yunshan Liang, Xing Yang, Mengxin Zhang, Zhigang Wang, Zhenping Feng (2026). An experimental and numerical study of gas-solid aerosol heat transfer in a turbine blade internal cooling channel with V-shaped ribs. The Aeronautical Journal.DOI
14. Yu Song, Liangliang Wang, Zhiduo Wang, Zhao Liu, Zhenping Feng (2026). Non-intrusive polynomial chaos expansion investigation in cascade aerothermal uncertainty quantification. International Journal of Mechanical Sciences.DOI
15. Yong Tao, Mengjuan Xu, Zhao Liu, Zhenping Feng (2026). Comparative Generative Adversarial Network-Based Multiobjective Optimization of Aerothermal Performance for an Asymmetric Cavity Bottom Squealer Tip With Two Strategies: Fluid-Only Versus Conjugate Heat Transfer Models. Journal of Turbomachinery.DOI
16. Yong Tao, Yuhui Han, Zhao Liu, Zhenping Feng (2026). Experimental Investigation on the Effects of Mainstream Reynolds Number and Turbulence Intensity on Heat Transfer Coefficient, Adiabatic Film Cooling Effectiveness, and Overall Cooling Effectiveness in a Blade Squealer Tip. Journal of Turbomachinery.DOI
17. Weiqi Li, Liming Song, Zhi Tao, Jun Li, Zhenping Feng (2026). Aerothermal squealer tip optimization via direct manipulation of free form deformation method. Aerospace Science and Technology.DOI
18. Guohuang Cai, J H Li, Zheng Huang, Xing Yang, Yue Wang, Jiaxu Yao, Zhenping Feng (2026). An experimental and numerical study on particle deposition in a U-shaped ribbed cooling channel under high-temperature conditions. International Journal of Heat and Mass Transfer.DOI
19. Kun Xiao, Chenhao He, Juan He, Zhenping Feng (2026). Experimental and numerical investigation on flow and heat transfer characteristics of swirl cooling with ribs. International Journal of Turbo and Jet Engines.DOI
20. Yong Tao, Zhao Liu, Zhenping Feng (2026). A multi-strategy optimization comparison of aerothermal performance for an asymmetric cavity bottom squealer tip using a generative adversarial network-based surrogate model. Aerospace Science and Technology.DOI
21. Huihui Helen Wang, Xiying Niu, Qinghua DENG, Zhenping Feng (2026). A novel multi-jet impingement drainage cooling: unsteady dynamics and heat transfer mechanisms using large eddy simulation. Applied Thermal Engineering.DOI
22. Huihui Helen Wang, Yiyi Chen, Qinghua DENG, Xiying Niu, Zhenping Feng (2026). Effects of film extraction on unsteady flow dynamics and heat transfer of novel impingement drainage cooling by large eddy simulation. International Journal of Heat and Mass Transfer.DOI
23. 李鑫，王杰，陶志，宋立明，丰镇平（2025）. 全气膜涡轮级环境下非轴对称端壁气热耦合特性研究. 《风机技术》.DOI
24. 李若诚，张文豪，王志多，王志豪，王一，丰镇平（2025）. 攻角非定常波动对导叶端壁气膜冷却特性影响的数值研究. 《中南大学学报(自然科学版)》.
25. 蔡海扬，吴航，杨星，丰镇平（2025）. 基于空气幕冷却的涡轮端壁改进冷却结构的高温数值验证. 《推进技术》.DOI
26. 胡朝棕，杨星，丰镇平（2025）. 燃气轮机双层壁叶片表面颗粒污染物的非稳态沉积特性. 《推进技术》.
27. 杨克峰，高尚鸿，汪翔宇，刘钊，丰镇平（2025）. 扰流柱肋对透平叶片尾缘劈缝通道气热特性的影响. 《动力工程学报》.DOI
28. 包林焌，许瑶，刘钊，丰镇平（2025）. 涡轮导叶双层壁冷却结构设计的管网耦合计算方法研究. 《推进技术》.DOI
29. 王一，汪翔宇，李家龙，胡青松，丰镇平（2025）. 多孔介质扰流柱对双层壁冷却系统性能影响的数值研究. 《西安交通大学学报》.
30. 刘如一，刁安娜，迟志男，张帅钊，邓清华，李军，丰镇平（2025）. 超临界二氧化碳向心透平流动损失分解及损失特性研究. 《西安交通大学学报》.
31. 刘昱栋，刘钊，陶永，石龑，丰镇平（2025）. 带挡板结构的平面叶栅凹槽叶顶气膜冷却特性. 《西安交通大学学报》.
32. 汪翔宇，高尚鸿，丰镇平（2025）. 涡轮叶片的热流固耦合数值方法研究及应用. 《西安交通大学学报》.
33. 龙泽，杨星，丰镇平（2025）. 燃气透平带肋U型通道中纳米气溶胶对流传热特性及机理. 《热能动力工程》.DOI
34. 刘洲洋，廖健鑫，邓清华，李军，丰镇平（2025）. 工质与叶轮传热对超临界二氧化碳向心透平气动性能与流动特性的作用机制. 《西安交通大学学报》.
35. K. Xiao, Chenhao He, Zhenping Feng (2025). Flow and conjugated heat transfer characteristics of swirl-rib-film composite cooling in gas turbine leading-edge. Thermal Science and Engineering Progress.DOI
36. Guoying Yang, Jianxin Liao, Qinghua Deng, Haocheng Wang, Jun Li, Feng Zhenping (2025). Loss Assessment Method of Fluid Curtain–Labyrinth Seals and Action Mechanism of Key Parameters on Seal Performance in a Turbine Rotor Tip. Journal of Fluids Engineering.DOI
37. Min Wang, Zhao Liu, Zhe Min Jia, Feng Zhenping (2025). Numerical Investigation on Influence of Midpassage Gap Leakage on Ingestion and Flow Characteristics in the Downstream Wheelspace of the 1.5-Stage Turbine. Journal of Engineering for Gas Turbines and Power.DOI
38. Huihui Helen Wang, Qinghua Deng, Feng Zhenping (2025). Heat Transfer Enhancement in Double-Wall Blade Suction Side Using Large Eddy Simulation.DOI
39. Yuhui Han, Zhao Liu, Yong Tao, Yudong Liu, Zhenping Feng (2025). Numerical investigation on film cooling and aerodynamic performance of squealer tip with curved film holes. International Communications in Heat and Mass Transfer.DOI
40. Yu Song, Zhao Liu, Zhenping Feng (2025). Interaction and combined cooling effects of mid-passage gap leakage with blade coolant in suction side and corner cooling. Physics of Fluids.DOI
41. Yu Song, Zhao Liu, Yuhui Han, Weixin Zhang, Zhenping Feng (2025). Corrigendum to ‘Cooperative optimization of cooling units arrangement on gas turbine endwall with generating adversarial network-based surrogate models’ [Energy 323 (2025) 135809]. Energy.DOI
42. Yong Tao, Zhao Liu, Zhenping Feng (2025). Aerothermal performance optimization of uncooled asymmetric cavity bottom blade squealer tip with generative adversarial network-based surrogate model. Energy.DOI
43. Xinyu Lv, Qingsong Hu, Yi Wang, Xiangyu Wang, Zhenping Feng (2025). Investigation of aerothermal coupling of double-wall cooling structure for turbine guide-vane suction surface with varying film plate thicknesses. International Communications in Heat and Mass Transfer.DOI
44. Qingsong Hu, Zhenping Feng, Shanghong Gao, Kefeng Yang, Yi Wang, Xiangyu Wang, Xiangyu Wang (2025). Study on a novel target rectifier featuring anisotropic flow resistance for enhancing double-wall cooling. Applied Thermal Engineering.DOI
45. Xiangyu Wang, Yizhen Xing, Kefeng Yang, Zhihao Wang, Xing Yang, Zhenping Feng (2025). Development of a dual motion model and its application to investigate the unsteady conjugate heat transfer characteristics of blade tip interacted by casing film cooling. Physics of Fluids.DOI
46. Ruocheng Li, Liangliang Wang, Zhiduo Wang, Bei Zhang, Xiaoben Du, Jinze Li, Xiangyu Wang, Zhenping Feng (2025). Uncertainty Quantification for Aerothermal Characteristics of HP Turbine Vanes Under Combined Hot-Streak and Turbulence Intensity Effects. Aerospace Research Communications.DOI
47. Ze Long, Xing Yang, Zhenping Feng (2025). Heat transfer enhancement by micro-particle-laden flows inside a ribbed cooling passage of gas turbine blades. International Journal of Heat and Mass Transfer.DOI
48. Shanghong Gao, Kefeng Yang, Xiangyu Wang, Yi Wang, Qingsong Hu, Zhao Liu, Zhenping Feng (2025). Optimization on aerothermal characteristics of gas turbine vanes under various stacking structures based on deep-leaning surrogate model. Aerospace Science and Technology.DOI
49. Peng Chu, Yongfeng Sui, Bin Dai, Jibing Lan, Wenyang Shao, Binbin Xue, Xiliang Xu, Zhenping Feng (2025). Film Cooling Performance and Superposition Method of an Actual Turbine Vane at High Freestream Turbulence. Aerospace.DOI
50. Yong Tao, Zhao Liu, Yuhui Han, Yudong Liu, Zhenping Feng (2025). An investigation on aerothermal performance of squealer tip with baffle arranged above film holes—Part Ⅱ: Aerodynamic performance. International Journal of Heat and Fluid Flow.DOI
51. Yong Tao, Zhao Liu, Yuhui Han, Yudong Liu, Zhenping Feng (2025). An investigation on aerothermal performance of squealer tip with baffle arranged above film holes—Part Ⅰ: Film cooling performance. International Journal of Heat and Fluid Flow.DOI
52. Zhao Liu, Zhe Min Jia, Yao Xu, Zhenping Feng (2025). Experimental and Numerical Investigation on Cooling and Aerodynamic Performance of Turbine Blade Ribbed Squealer Tip. Journal of Thermal Science.DOI
53. Bing Tang, Jianxin Liao, Zhuobin Zhao, Qinghua Deng, Jun Li, Zhenping Feng (2025). Windage and Leakage Losses in Impeller Back Gap and Labyrinth Seal Cavities of Supercritical CO2 Centrifugal Compressors. Applied Sciences.DOI
54. Yongkeun Song, Zhao Liu, Yuhui Han, Weixin Zhang, Zhenping Feng (2025). Cooperative optimization of cooling units arrangement on gas turbine endwall with generating adversarial network-based surrogate models. Energy.DOI
55. Yu Song, Zhao Liu, Yuqiang Ding, Zhenping Feng (2025). Investigation on the cooling characteristic of turbine endwall with mid-passage gap misalignment. Thermal Science and Engineering Progress.DOI
56. Xing Yang, Zihan Hao, Zhenping Feng (2025). Influences of Particulate Deposition on Vane Trailing-Edge Film Cooling: Adiabatic and Overall Cooling Effectiveness. Journal of Turbomachinery.DOI
57. Xing Yang, Zihan Hao, Zhenping Feng (2025). Evaluation of Particulate Deposition Effects on Film Cooling Using Conjugate Heat Transfer Methods: An Experimental and Numerical Study. Journal of Thermal Science and Engineering Applications.DOI
58. Yu Song, Zhao Liu, Weixin Zhang, Yixuan Lu, Zhenping Feng (2025). Comprehensive evaluation of phantom cooling design on turbine blade endwall with typical cooling layout. Aerospace Science and Technology.DOI
59. 伍赫，郝子晗，杨星，丰镇平（2024）. 颗粒物沉积与平板气膜冷却耦合效应的数值研究. 《航空动力学报》.
60. 包林焌，刘钊，张韦馨，丰镇平（2024）. 气膜抽吸作用下透平叶片冲击冷却的一维管网计算方法研究. 《西安交通大学学报》.
61. 罗培森，邓清华，徐凯颖，王辉辉，丰镇平（2024）. 燃气透平冲击冷却的射流孔形状优化方法及验证. 《西安交通大学学报》.
62. 丰镇平（2024）. 燃气轮机装置. 《机械工业出版社》.
63. 胡朝棕，郝子晗，杨星，丰镇平（2024）. 进口热斑影响下的燃气涡轮颗粒物沉积特性. 《热能动力工程》.
64. 高尚鸿，汪翔宇，张韦馨，杨克峰，丰镇平（2024）. 数据驱动在透平叶片冷却设计中的应用进展. 《动力工程学报》.DOI
65. 刘钊，王敏，丰镇平（2024）. 燃气轮机透平转静盘腔内流动与传热研究进展. 《中国电机工程学报》.
66. 宋宇，刘钊，杨星，丰镇平（2024）. 透平叶栅风影冷却研究进展. 《推进技术》.
67. 丰镇平，刘钊，陆熠璇，张韦馨，谢晔航，丁玉强，宋宇（2024）. 燃气透平叶栅端壁冷却研究进展. 《动力工程学报》.DOI
68. 丰镇平，袁新（2024）. 特约主编寄语. 《动力工程学报》.
69. 刘钊，孙睿，樊远航，丰镇平（2024）. 燃气透平榫头/榫槽装配间隙流动与换热特性研究. 《西安交通大学学报》.
70. 吴航，杨星，刘钊，丰镇平（2024）. 多级冲击冷却流动与换热特性数值研究. 《工程热物理学报》.
71. 高尚鸿，张韦馨，杨克峰，汪翔宇，丰镇平（2024）. 应用不同深度学习代理模型的灯笼型扰流柱通道换热性能分布预测方法比较. 《西安交通大学学报》.
72. 包林焌，刘钊，张韦馨，丰镇平（2024）. 燃气透平叶片前缘冲击/气膜复合冷却的管网耦合方法研究. 《西安交通大学学报》.
73. 吴航，杨星，蔡海扬，刘钊，丰镇平（2024）. 延伸冲击-扇形气膜孔复合结构耦合换热实验与数值研究. 《西安交通大学学报》.
74. K. Xiao, Xiandi Zhao, Juan He, Zhaokai Ma, Zhenping Feng (2024). Conjugated heat transfer characteristics of ribbed-swirl cooling in turbine blade under rotation condition. International Journal of Turbo & Jet-Engines.DOI
75. Hang Wu, Xing Yang, Zhao Liu, Zhenping Feng (2024). Comparisons between forward- and backward-inclined film injection over an effusion wall with internal jet-array impingement: Cooling effectiveness, heat transfer, and analytical model. Applied Thermal Engineering.DOI
76. Huihui Helen Wang, Qinghua Deng, Zhenping Feng (2024). Flow and heat transfer characteristics of a novel jet impingement cooling with multi-layer drainage channels at blade leading edge. International Communications in Heat and Mass Transfer.DOI
77. Zhao Liu, Weixin Zhang, Yixuan Lu, Yu Song, Zhenping Feng (2024). Effects of Spline Mid-Passage Gap on Turbine Endwall Film Cooling Characteristics. Heat Transfer Engineering.DOI
78. Xing Yang, Zihan Hao, Zhenping Feng (2024). Experimental characterization of particulate deposition on turbine vane leading-edge models with various showerhead cooling geometries. International Journal of Thermal Sciences.DOI
79. Yixuan Lu, Zhao Liu, Jing Ye, Zhenping Feng (2024). Experimental and numerical investigation into the effects of spline mid-passage gap on endwall film cooling performance and aerodynamic characteristics. International Journal of Heat and Fluid Flow.DOI
80. Qinghua Deng, Anqi Liu, Jun Li, Zhenping Feng (2024). A review on supercritical CO2 and CO2-based mixture in power cycle. Energy Conversion and Management.DOI
81. Zhuobin Zhao, Jianxin Liao, Qinghua Deng, Jun Li, Zhenping Feng (2024). Flow mechanism and back gap windage loss of a sCO2 radial inflow turbine with impeller scallops. The Journal of Supercritical Fluids.DOI
82. Zhiduo Wang, Zhihao Wang, Wenhao Zhang, Ruocheng Li, Yi Wang, Liangliang Wang, Zhenping Feng (2024). Experimental and numerical studies on hot streak transportation and attenuation in a 1.5-stage turbine. Physics of Fluids.DOI
83. Yi Wang, Jialong Li, Kefeng Yang, Hang Wu, Qingsong Hu, Xiangyu Wang, Zhenping Feng (2024). Conjugate heat transfer effects of tri-periodic minimal surfaces on cooling performance in turbine internal cooling channels. International Journal of Heat and Mass Transfer.DOI
84. Chaozong Hu, Xing Yang, Yichen Huang, Zhenping Feng (2024). Contaminant dust effects on mist cooling in ribbed U-shaped channels of gas turbine blades. Applied Thermal Engineering.DOI
85. Xing Yang, Hang Wu, Zhenping Feng (2024). Conjugate Heat Transfer Validation of an Optimized Film Cooling Configuration for a Turbine Vane Endwall. Journal of Turbomachinery.DOI
86. Hang Wu, Xing Yang, Zhao Liu, Zhenping Feng (2024). Experimental Heat Transfer and Cooling Effectiveness over an Effusion Wall with Internal Jet-Array Impingement: Influence of Hole Arrangement. Proceedings.DOI
87. Zhenhui Lian, Xiangyu Wang, Xing Yang, Hang Wu, Zhenping Feng (2024). Aerodynamic Performance Analysis of a Novel Geometry-variable Turbine Guide Vane with a Fixed Angle of Attack. Proceedings.DOI
88. Shanghong Gao, Kefeng Yang, Weixin Zhang, Qingsong Hu, Xiangyu Wang, Zhao Liu, Zhenping Feng (2024). Study of Optimization Method based on Deep Learning for Flow and Heat Transfer Characteristics within Lantern-shaped Pin Fin Channel. Proceedings.DOI
89. Kefeng Yang, Xiangyu Wang, Shanghong Gao, Zhenping Feng (2024). Effect of Streamwise Spacing on the Flow and Heat Transfer of Lantern-shaped Pin Fins in a Rectangular Channel. Proceedings.DOI
90. Song Jin Yu, Zhao Liu, Weixin Zhang, Yuqiang Ding, Zhenping Feng (2024). Experimental and numerical investigation on middle passage gap leakage with different mass flow rate and injection angle on turbine endwall. International Journal of Heat and Fluid Flow.DOI
91. Yu Song, Zhao Liu, Yehang Xie, Zhenping Feng (2024). Effects of rim seal exit geometry on the cooling characteristics of turbine endwall and blade suction side. Thermal Science and Engineering Progress.DOI
92. Yu Song, Zhao Liu, Weixin Zhang, Yu‐Qiang Ding, Zhenping Feng (2024). Experimental investigation on cooling performance and heat transfer characteristics of the ribbed endwall with upstream leakage. International Communications in Heat and Mass Transfer.DOI
93. Weiqi Li, Zhi Tao, Liming Song, Jun Li, Zhenping Feng (2024). Aerothermal Optimization and Sensitivity Analysis of a Turbine Rotor Tip With a Circumferential Casing Groove Configuration.DOI
94. Cunxi Li, Liming Song, Zhendong Guo, Zhao Yang, Jun Li, Zhenping Feng (2024). Generative Model Based Parameterization for More Efficient Aerodynamic Optimization of Non-Axisymmetric Endwall.DOI
95. Feng Li, Zhao Liu, Yong Tao, Weixin Zhang, Zhenping Feng (2024). A conjugate study on the application of combined impingement and film cooling for a turbine blade tip. Applied Thermal Engineering.DOI
96. Yong Tao, Zhao Liu, Yudong Liu, Weixin Zhang, Zhenping Feng (2024). An investigation on film cooling and aerodynamic performance of squealer blade tip with inclined cavity bottom. International Journal of Heat and Fluid Flow.DOI
97. Zhe Min Jia, Feng Li, Weixin Zhang, Zhao Liu, Zhenping Feng (2024). Experimental and Numerical Evaluation of the Film Cooling Characteristics of the Multicavity Tip With Inclined Film Holes. ASME Journal of Heat and Mass Transfer.DOI
98. Yi Wang, Qingsong Hu, Kefeng Yang, Xing Yang, Xiangyu Wang, Zhenping Feng (2024). A conjugate heat transfer investigation of outer-wall cooling performance in double-wall vane pressure side. Numerical Heat Transfer Part A Applications.DOI
99. Yi Wang, Wenhao Zhang, Ruocheng Li, Zhiduo Wang, Zhihao Wang, Zhenping Feng (2024). Study on effects of inlet nonuniformities on aerothermal performance of NGV pressure side with different film cooling designs. Numerical Heat Transfer Part A Applications.DOI
100. Zhuobin Zhao, Qinghua Deng, Jun Li, Zhenping Feng (2024). Influence of Scallops on Windage Loss and Flow Characteristics in Disk-Type Gap. Journal of Fluids Engineering.DOI
101. Huihui Helen Wang, Xiying Niu, Qinghua Deng, Zhenping Feng (2024). Action Mechanism of Film Extraction on Channel Impingement Cooling for Blade Leading Edge Using Large Eddy Simulation. Journal of Turbomachinery.DOI
102. Weixin Zhang, Zhao Liu, Song Jin Yu, Yixuan Lu, Zhenping Feng (2024). Optimization of Discrete Film Hole Arrangement on a Turbine Endwall With Middle Passage Gap. ASME Journal of Heat and Mass Transfer.DOI
103. Guoying Yang, Gang Yin, Pengfei Zhang, Qinghua Deng, Jun Li, Zhenping Feng (2024). Comparative assessment of aerodynamic losses in turbine stages with supercritical carbon dioxide and steam. The Journal of Supercritical Fluids.DOI
104. Weixin Zhang, Zhao Liu, Yu Song, Yixuan Lu, Zhenping Feng (2024). An investigation on implementation of generating adversarial network-based surrogate models for prediction of turbine endwall film cooling effectiveness. Engineering Applications of Artificial Intelligence.DOI
105. Weiqi Li, Zhi Tao, Liming Song, Jun Li, Zhenping Feng (2024). Effects of the circumferential casing groove configuration on aerothermal performance of a transonic turbine stage. International Journal of Thermal Sciences.DOI
106. Huihui Helen Wang, Qinghua Deng, Zhenping Feng (2024). Heat Transfer and Flow Characteristics of Channel Impingement Cooling Structure at Leading Edge Inside Turbine Blades Using Large Eddy Simulation. ASME Journal of Heat and Mass Transfer.DOI
107. Xing Yang, Zihan Hao, Zhenping Feng (2024). Experimental assessment of film cooling from cylindrical holes subject to particulate deposition. Experimental Thermal and Fluid Science.DOI
108. Xing Yang, Qiang Zhao, Hang Wu, Zhenping Feng (2024). An Active Phantom Cooling Concept for Turbine Endwall Cooling From Pressure-Surface Film Coolant Injection. ASME Journal of Heat and Mass Transfer.DOI
109. Hang Wu, Xing Yang, Qiang Zhao, Zhenping Feng (2024). Improving Turbine Endwall Overall Cooling Effectiveness Using Curtain Cooling and Redistributed Film-Hole Layouts: An Experimental and Computational Study. Journal of Thermal Science and Engineering Applications.DOI
110. Juan He, Qinghua Deng, Jun Li, Zhenping Feng (2024). Effect of Crossflow-to-Jet Temperature Ratio on Heat Transfer and Flow of Impingement Cooling. International Journal of Gas Turbine Propulsion and Power Systems.DOI
111. 杨国英，邓清华，徐伯洲，张永海，李军，丰镇平（2023）. 二氧化碳和水蒸气在叶栅通道内的流动特性对比. 《热力发电》.
112. 胡乐豪，邓清华，刘洲洋，李军，丰镇平（2023）. 超临界二氧化碳迷宫密封内摩擦损失数值研究及流动特性分析. 《西安交通大学学报》.
113. 刘钊，张韦馨，谢晔航，丁玉强，丰镇平（2023）. 装配间隙泄漏流对透平端壁冷却影响的实验研究. 《西安交通大学学报》.
114. 李玮琪，陶志，宋立明，李军，丰镇平（2023）. 机匣周向槽对跨声速涡轮叶顶泄漏流结构和气动特性影响的研究. 《推进技术》.
115. 王辉辉，牛夕莹，邓清华，丰镇平（2023）. 具有新型双层壁结构的透平叶片流热耦合研究. 《热能动力工程》.
116. 郭振东，成辉，陈云，蒋首民，宋立明，李军，丰镇平（2023）. 融合相似性原理的涡轮叶型流场预测方法研究. 《力学学报》.
117. 王志多，秦康，吴兴，齐文娇，张庆尧，丰镇平（2023）. 顺–逆向组合气膜孔在涡轮导叶端壁上的应用研究. 《工程热物理学报》.
118. 郝子晗，杨星，丰镇平（2023）. 高压涡轮动叶机匣颗粒物沉积效应的非定常数值研究. 《工程热物理学报》.
119. 郭振东，李存晰，宋立明，李军，丰镇平（2023）. 采用知识迁移加速的智能气动设计优化方法. 《西安交通大学学报》.
120. 贾哲，李冯，张韦馨，刘钊，石䶮，丰镇平（2023）. 平面叶栅多凹槽叶顶倾斜圆柱孔气膜冷却与气动特性研究. 《西安交通大学学报》.
121. 杨星，赵强，吴航，丰镇平（2023）. 利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究. 《西安交通大学学报》.
122. 刘钊，丁玉强，谢晔航，张韦馨，丰镇平（2023）. 气膜孔布置对透平端壁冷却和气动性能影响的研究. 《西安交通大学学报》.
123. 汪祺能，宋立明，郭振东，李军，丰镇平（2023）. 采用动态交互作用分析的叶轮机械优化算法研究. 《西安交通大学学报》.
124. 郑鹏飞，李祥晟，丰镇平（2023）. 结合系统辨识的甲烷掺氢预混火焰热声稳定性研究. 《西安交通大学学报》.
125. 肖坤，董光辰，丰镇平（2023）. 异侧多级旋流冷却结构对横流抑制及强化传热的影响. 《西安交通大学学报》.
126. Liu-Xi Cai, Yao He, Jiawei Yao, Yanfang Hou, Shun-sen Wang, Zhenping Feng (2023). Multiobjective Optimization Study On the Aerodynamic Performance and Anti-Erosion Characteristics of a Single-Stage Dusty Flue Gas Turbine. Journal of Engineering For Gas Turbines and Power.DOI
127. Xing Yang, Hang Wu, Zihan Hao, Zhenping Feng (2023). Assessment of a virtual boundary concept for efficient modeling of turbine film cooling. Numerical Heat Transfer Part A Applications.DOI
128. Weixin Zhang, Zhao Liu, Yu Song, Yixuan Lu, Zhenping Feng (2023). Prediction of multi-physics field distribution on gas turbine endwall using an optimized surrogate model with various deep learning frames. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
129. Xu Yao, Zhao Liu, Rui Sun, Zhenping Feng (2023). Numerical Study on the Flow and Heat Transfer Characteristics in Mortise and Tenon Gap under Rotating Conditions. Energies.DOI
130. Yixuan Lu, Zhao Liu, Weixin Zhang, Yuqiang Ding, Zhenping Feng (2023). Experimental and Numerical Investigations into the Effects of Rim Seal Structure on Endwall Film Cooling and Flow Field Characteristics. Energies.DOI
131. Qineng Wang, Liming Song, Zhendong Guo, Jun Li, Zhenping Feng (2023). A Novel Multi-Fidelity Surrogate for Efficient Turbine Design Optimization. Journal of Turbomachinery.DOI
132. Yougang Ruan, Zhenping Feng (2023). Study on continuous adjoint-based optimization method for internal cooling structures in turbine blades with conjugate heat transfer. Numerical Heat Transfer Part B Fundamentals.DOI
133. Zhao Liu, Yu Song, Yixuan Lu, Weixin Zhang, Zhenping Feng (2023). Numerical Study of Endwall Modification with Micro-Scale Ribs in a Turbine Cascade. Applied Sciences.DOI
134. Weixin Zhang, Yehang Xie, Yuqiang Ding, Zhao Liu, Zhenping Feng (2023). Effect of upstream slot leakage on turbine endwall film cooling characteristics. International Journal of Thermal Sciences.DOI
135. Xing Yang, Qiang Zhao, Hang Wu, Zhenping Feng (2023). Film cooling effectiveness from upstream purge slots of a turbine vane endwall: Experiment, modeling, and correlation. International Journal of Heat and Mass Transfer.DOI
136. Zihan Hao, Xing Yang, Zhenping Feng (2023). Particulate Deposition Effects in Film Cooling Holes. Proceedings.DOI
137. Yi Wang, Qingsong Hu, Xiangyu Wang, Zhenping Feng (2023). Conjugate Heat Transfer Characteristics of Narrow Channels in Double-Wall Cooling System with Variable-Size Pin Fins and Film Holes. Proceedings.DOI
138. Zhendong Guo, Zijun Zhang, Yun Chen, Guangjian Ma, Liming Song, Jun Li, Zhenping Feng (2023). An efficient surrogate-assisted differential evolution algorithm for turbomachinery cascades optimization with more than 100 variables. Aerospace Science and Technology.DOI
139. Kefeng Yang, Xiangyu Wang, Shanghong Gao, Qingsong Hu, Zhenping Feng (2023). Study on flow and heat transfer characteristics in rectangular channels with lantern-shaped pin fin array: Part II—Global sensitivity analysis and optimization. Numerical Heat Transfer Part A Applications.DOI
140. Zhuobin Zhao, Qinghua Deng, Lehao Hu, Jun Li, Zhenping Feng (2023). Skin-Friction Coefficient Model Verification and Flow Characteristics Analysis in Disk-Type Gap for Radial Turbomachinery. Applied Sciences.DOI
141. Feng Li, Zhao Liu, Yong Tao, Weixin Zhang, Zhenping Feng (2023). An experimental and numerical study on the blade tip conjugate heat transfer performance. Applied Thermal Engineering.DOI
142. Kefeng Yang, Yongfeng Sui, Xiangyu Wang, Zhenping Feng (2023). Study on flow and heat transfer characteristics in rectangular channels with lantern-shaped pin fin array: Part I- effect of sphere diameter. Numerical Heat Transfer Part A Applications.DOI
143. Qineng Wang, Liming Song, Zhendong Guo, Jun Li, Zhenping Feng (2023). A Novel Multi-Fidelity Surrogate for Turbomachinery Design Optimization.DOI
144. Qingsong Hu, Yi Wang, Kefeng Yang, Shanghong Gao, Xiangyu Wang, Zhenping Feng (2023). Study on Anti-Crossflows Characteristics of Jet Shape and Inclination in Multiple Jet Impingement Cooling.DOI
145. Guoying Yang, Rui Yang, Qinghua Deng, Bozhou Xu, Jun Li, Zhenping Feng (2023). Numerical Investigation of Flow Characteristics in a Supercritical Carbon Dioxide Turbine for 20 Megawatt Brayton Cycle.DOI
146. Zhuobin Zhao, Qinghua Deng, Lehao Hu, Jun Li, Zhenping Feng (2023). Windage Loss and Flow Characteristics in Back Gap of Radial Inflow Impellers With Steam Medium.DOI
147. Lehao Hu, Qinghua Deng, Zhouyang Liu, Jun Li, Zhenping Feng (2023). Model of skin friction coefficient in a supercritical CO2 turbine-alternator-compressor unit. The Journal of Supercritical Fluids.DOI
148. Feng Li, Zhao Liu, Zhenping Feng (2023). Experimental and computational assessment into the heat transfer for the blade multicavity tips. Applied Thermal Engineering.DOI
149. Zihan Hao, Xing Yang, Zhenping Feng (2023). Unsteady modeling of particle deposition effects on aerodynamics and heat transfer in turbine stator passages with mesh morphing. International Journal of Thermal Sciences.DOI
150. Hang Wu, Xing Yang, Yongqiang Wu, Zhenping Feng (2023). Experimental decoupled-analysis of overall cooling effectiveness for a turbine endwall with internal and external cooling configurations. Applied Thermal Engineering.DOI
151. Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng (2023). Impingement heat transfer enhancement in crossflow by a skewed twisted rib pair for simplified leading edge structure. Numerical Heat Transfer Part A Applications.DOI
152. Xing Yang, Florian Seibold, Zhenping Feng, Bernhard Weigand (2023). Partial Blockage Effects on Turbine Internal Swirl Cooling due to Particle Deposition. Proceedings of ... European Conference on Turbomachinery Fluid Dynamics & Thermodynamics.DOI
153. 邓清华，王辉辉，何伟，丰镇平（2022）. 气膜抽吸与叶片前缘内部壁面射流的作用机制. 《西安交通大学学报》.
154. 杨星，吴永强，吴航，赵强，丰镇平（2022）. 涡轮端壁内部点阵冷却结构的流热耦合研究. 《西安交通大学学报》.
155. 李冯，贾哲，张韦馨，刘钊，石䶮，丰镇平（2022）. 透平动叶多凹槽叶顶气膜冷却特性的研究. 《西安交通大学学报》.
156. 叶绿，陈显赟，汪翔宇，丰镇平（2022）. 燃气透平叶片尾缘内部冷却通道流动与换热特性研究. 《热能动力工程》.
157. 邓清华，胡乐豪，赵奕萌，杨国英，李军，丰镇平（2022）. 轴类间隙内摩擦损失模型验证及流动特性分析. 《西安交通大学学报》.
158. 霍东方，张子健，何娟，邓清华，李军，丰镇平（2022）. 燃气轮机湿压缩技术研究进展及应用综述. 《燃气轮机技术》.
159. 吴航，杨星，赵强，武斌，丰镇平（2022）. 延伸冲击孔冲击冷却流动与换热特性的数值研究. 《推进技术》.DOI
160. 胡乐豪，邓清华，杨国英，李军，丰镇平（2022）. 轴类转静间隙内CO2流动特性及摩擦损失研究. 《工程热物理学报》.
161. Juan He, Qinghua Deng, K. Xiao, Zhenping Feng (2022). Heat transfer distribution of single oblique jet impingement in crossflow under different inlet conditions. International Journal of Turbo & Jet-Engines.DOI
162. Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng (2022). Heat transfer enhancement by V-shaped protrusions on jet plate under different crossflow conditions. International Communications in Heat and Mass Transfer.DOI
163. Huihui Helen Wang, Qinghua Deng, Wei Feng He, Zhenping Feng (2022). Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge. Journal of Turbomachinery.DOI
164. Lehao Hu, Qinghua Deng, Zhouyang Liu, Jun Li, Zhenping Feng (2022). Effects of Surface Roughness on Windage Loss and Flow Characteristics in Shaft-Type Gap with Critical CO2. Applied Sciences.DOI
165. Xing Yang, Zihan Hao, Florian Seibold, Zhenping Feng, Phillip M. Ligrani, Bernhard Weigand (2022). Particulate Deposition Effects on Internal Swirl Cooling of Turbine Blades. Journal of Engineering for Gas Turbines and Power.DOI
166. Feng Li, Weixin Zhang, Zhao Liu, Zhenping Feng (2022). Heat Transfer Characteristics of the Multicavity Tips at Different Turbulence Levels. ASME Journal of Heat and Mass Transfer.DOI
167. Weixin Zhang, Feng Li, Yehang Xie, Yuqiang Ding, Zhao Liu, Zhenping Feng (2022). Experimental and numerical investigations of discrete film holes cooling performance on a blade endwall with mid-passage gap leakage. International Journal of Heat and Mass Transfer.DOI
168. Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng (2022). Impingement Heat Transfer Enhancement in Crossflow by V-Shaped Protrusion Vortex Generator. Heat Transfer Engineering.DOI
169. Lehao Hu, Qinghua Deng, Jun Li, Zhenping Feng (2022). Model improvement for shaft-type windage loss with CO2. The Journal of Supercritical Fluids.DOI
170. Kun Xiao, Juan He, Pengfei Zheng, Zhenping Feng (2022). Effects of circumferential ribs on suppressing cross-flow and enhancing heat transfer in swirl cooling. International Journal of Thermal Sciences.DOI
171. Zihan Hao, Xing Yang, Xiangyu Wang, Zhenping Feng (2022). Unsteady simulations of deposition in a rotor passage of the first-stage turbine for an aero-engine. Journal of the Global Power and Propulsion Society.DOI
172. Feng Li, Zhe Min Jia, Weixin Zhang, Zhao Liu, Zhenping Feng (2022). Investigation into the film cooling performance of multi-cavity tips with different cavity depths. International Journal of Thermal Sciences.DOI
173. Xing Yang, Qiang Zhao, Hang Wu, Zhenping Feng (2022). Investigations on Cooling Hole Patterns Over a Turbine Endwall for Improving Cooling Effectiveness.DOI
174. Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng (2022). Crossflow Effect on Heat Transfer and Flow Characteristics of Simplified Double Wall Cooling Structure.DOI
175. Lehao Hu, Qinghua Deng, Zhigang Li, Jun Li, Zhenping Feng (2022). Windage Loss and Flow Characteristics in Impeller Back Clearance of sCO2 Centrifugal Compressor.DOI
176. Kun Xiao, Juan He, Zhenping Feng (2022). Heat Transfer Enhancement of Swirl Cooling by Different Crossflow Diverters.DOI
177. Xing Yang, Florian Seibold, Zhenping Feng, Bernhard Weigand (2022). Effects of blade lean on internal swirl cooling at turbine blade leading edges. International Journal of Heat and Mass Transfer.DOI
178. Feng Li, Weixin Zhang, Zhe Min Jia, Zhao Liu, Zhenping Feng (2022). Experimental study about the tip phantom cooling with different cooling-hole configurations on the blade-surface. International Journal of Heat and Mass Transfer.DOI
179. Feng Li, Zhe Min Jia, Haifeng Wang, Zhao Liu, Zhenping Feng (2022). Experimental and Numerical Investigations Into the Blade Tip Phantom Cooling Performance. Journal of Engineering for Gas Turbines and Power.DOI
180. Zhiduo Wang, Zhenping Feng, Xiaobo Zhang, Jingbo Peng, Fei Zhang, Xing Yun Wu (2022). Improving cooling performance and robustness of NGV endwall film cooling design using micro-scale ribs considering incidence effects. Energy.DOI
181. Weixin Zhang, Feng Li, Zhe Min Jia, Zhao Liu, Zhenping Feng, Yi Zhang (2022). Experimental study on performance verification test of optimized film cooling holes in a linear cascade. Applied Thermal Engineering.DOI
182. Zhigang Li, Zhuocong Li, Jun Li, Zhenping Feng (2022). Static and Rotordynamic Characteristics for Two Types of Novel Hole-Pattern Seals Operating in Supercritical CO2 Turbomachinery. Journal of Engineering for Gas Turbines and Power.DOI
183. Zhiduo Wang, Zhihao Wang, Zhenping Feng (2022). Influence of Combustor Exit Conditions on Cooling Performance of NGV Endwall with Double Row Cooling Holes. Proceedings.DOI
184. Zihan Hao, Xing Yang, Xiangyu Wang, Zhenping Feng (2022). URANS Simulations of Deposition in a Rotor Passage of the First-Stage Turbine for an Aero-Engine. Proceedings.DOI
185. Guo Zhendong, Sun Wei, Liming Song, Jun Li, Zhenping Feng (2022). Generative Transfer Optimization for Aerodynamic Design. Proceedings.DOI
186. Zhansheng Liu, Junfeng Xiao, Song Gao, Yuanyuan Li, Feilong Yu, Jingyao Duan, Zhenping Feng (2022). Design Optimization of the Convergent Passage Profile of a High-Load Turbine Vane Endwall. Proceedings.DOI
187. Xing Yang, Hang Wu, Zhenping Feng (2022). Experimental and Numerical Investigations of Extended Jet Effects on Multiple-Jet Impingement Heat Transfer Characteristics. Journal of Thermal Science and Engineering Applications.DOI
188. Xing Yang, Yongqiang Wu, Qiang Zhao, Zhenping Feng (2022). Study on film cooling for aero-engine turbine endwalls with various small-scale surface structures. Aerospace Science and Technology.DOI
189. Li Feng, Zhe Min Jia, Weixin Zhang, Zhao Liu, Zhenping Feng (2022). Experimental comparisons of film cooling performance for the multi-cavity tips at two different tip gaps. International Journal of Heat and Mass Transfer.DOI
190. Xing Yang, Hang Wu, Zhenping Feng (2022). Jet Impingement Heat Transfer Characteristics with Variable Extended Jet Holes under Strong Crossflow Conditions. Aerospace.DOI
191. Qinghua Deng, Huihui Helen Wang, Wei Feng He, Zhenping Feng (2022). Cooling Characteristic of a Wall Jet for Suppressing Crossflow Effect under Conjugate Heat Transfer Condition. Aerospace.DOI
192. Kun Xiao, Juan He, Zhenping Feng (2022). Effects of Variable Jet Nozzle Angles on Cross-Flow Suppression and Heat Transfer Enhancement of Swirl Chamber. Journal of Thermal Science.DOI
193. Kun Xiao, Juan He, Zhenping Feng (2022). EFFECTS OF TRAPEZOIDAL SWIRL CHAMBER ON CROSS-FLOW SUPPRESSION AND HEAT TRANSFER ENHANCEMENT IN TURBINE BLADE LEADING-EDGE SWIRL COOLING. Heat Transfer Research.DOI
194. 阮有钢，刘战胜，丰镇平（2021）. 基于伴随方法的叶片冷却通道导热优化研究. 《工程热物理学报》.
195. 刘钊，贾哲，张志欣，丰镇平（2021）. 透平动叶前缘冲击-气膜复合冷却与旋流-气膜复合冷却的热流耦合对比研究. 《西安交通大学学报》.
196. 邓清华，何伟，张亮，彭傲然，赵卓斌，丰镇平（2021）. 翅片式弯头流动调整器的整流特性. 《西安交通大学学报》.
197. 杨国英，邓清华，何伟，丰镇平（2021）. 圆形截面双扭管内流动稳定性和均匀性评估. 《西安交通大学学报》.
198. 张韦馨，刘战胜，杨星，刘钊，丰镇平（2021）. 射流角和质量流量比对涡轮端壁气膜冷却特性的影响. 《西安交通大学学报》.
199. 肖坤，何娟，丰镇平（2021）. 交叉扭转椭圆前缘冲击腔抑制横流及强化换热机理研究. 《工程热物理学报》.
200. 张志欣，李冯，刘钊，丰镇平（2021）. 气膜孔角度对动叶前缘冲击/气膜复合冷却的影响. 《工程热物理学报》.
201. 杨星，郝子晗，丰镇平（2021）. 考虑进口旋流的涡轮静叶流动传热的颗粒物沉积效应. 《西安交通大学学报》.
202. Xing Yang, Qiang Zhao, Zhenping Feng (2021). Experimental evaluation of cooling effectiveness from novel film holes over turbine endwalls with inlet swirl. International Journal of Thermal Sciences.DOI
203. Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng (2021). Heat Transfer Enhancement of Impingement Cooling by Different Crossflow Diverters. ASME Journal of Heat and Mass Transfer.DOI
204. Feng Li, Haifeng Wang, Zhao Liu, Zhenping Feng, Yan Shi (2021). Comparisons of blade tip phantom cooling effectiveness for two tip structures with three tip clearances. Applied Thermal Engineering.DOI
205. Wenhao Zhang, Zhiduo Wang, Zhihao Wang, Ruocheng Li, Zhenping Feng (2021). Study on heat transfer characteristics of NGVs influenced by non-reacting lean burn combustor simulator flow. International Journal of Thermal Sciences.DOI
206. Juan He, Qinghua Deng, Zhenping Feng (2021). Heat transfer enhancement of impingement cooling with corrugated target surface. International Journal of Thermal Sciences.DOI
207. Zhihao Wang, Zhiduo Wang, Wenhao Zhang, Zhenping Feng (2021). Numerical study on unsteady film cooling performance of turbine rotor considering influences of inlet non-uniformities and upstream coolant. Aerospace Science and Technology.DOI
208. Xing Yang, Zihan Hao, Zhenping Feng (2021). An experimental study on turbine vane Leading-Edge film cooling with deposition. Applied Thermal Engineering.DOI
209. Juan He, Qinghua Deng, Zhenping Feng (2021). Film Cooling Performance Enhancement by Upstream V-shaped Protrusion/Dimple Vortex Generator. International Journal of Heat and Mass Transfer.DOI
210. Xing Yang, Zihan Hao, Zhenping Feng (2021). Particle deposition patterns on high-pressure turbine vanes with aggressive inlet swirl. Chinese Journal of Aeronautics.DOI
211. Xing Yang, Qiang Zhao, Hang Wu, Zihan Hao, Zhenping Feng (2021). Heat transfer measurements of a turbine endwall with engine-representative freestream turbulence and inlet swirl. Experimental Heat Transfer.DOI
212. Juan He, Qinghua Deng, Zhenping Feng (2021). Conjugate Heat Transfer Characteristics of Double Wall Cooling With Gradient Diameter of Film and Impingement Holes.DOI
213. Juan He, Qinghua Deng, Zhenping Feng (2021). Jet Impingement Heat Transfer Enhancement With Different Crossflow Diverter Shapes.DOI
214. Feng Li, Zhao Liu, Zhenping Feng (2021). Film Cooling and Aerodynamic Performance on Multi-Cavity Squealer Tip of a Turbine Blade.DOI
215. Yougang Ruan, Zhenping Feng (2021). Adjoint Based Heat Conduction Optimization of Struts Parameters Within Hollow Blade.DOI
216. Jie Wang, Chao Zhang, Xuebin Liu, Liming Song, Jun Li, Zhenping Feng (2021). Experimental Investigation and Optimal Design on the Film Cooling Performance of Fan-Shaped Hole With Vortex Generator Fed by Crossflow.DOI
217. Kun Xiao, Juan He, Zhenping Feng (2021). Film Cooling Effectiveness Enhancement Using Multi-Longitudinal Vortex Generated by Alternating Elliptical Film Holes.DOI
218. Zhi Fang, Zhigang Li, Jun Li, Zhenping Feng (2021). Static and Rotordynamic Characteristics for Two Novel Hole-Pattern Annular Liquid Seals With Circumferentially- /Axially- Oblique Hole Cavities.DOI
219. Fang Li, Shunsen Wang, Liu-xi Cai, Zhenping Feng (2021). Multi-Parameter Optimization to Improve the Erosion Resistance of Coating by FE Simulation.DOI
220. Zhigang Li, Zhuocong Li, Jun Li, Zhenping Feng (2021). Leakage and Rotordynamic Characteristics for Three Types of Annular Gas Seals Operating in Supercritical CO2 Turbomachinery. Journal of Engineering for Gas Turbines and Power.DOI
221. Kun Xiao, Jing He, Zhenping Feng (2021). Effects of alternating elliptical chamber on jet impingement heat transfer in vane leading edge under different cross-flow conditions. The Aeronautical Journal.DOI
222. Z. Hao, Xing Yang, Zhenping Feng (2021). Unsteady simulations of migration and deposition of fly-ash particles in the first-stage turbine of an aero-engine. The Aeronautical Journal.DOI
223. Wei Feng He, Qinghua Deng, Guoying Yang, Zhenping Feng (2021). Effects of Turning Angle and Turning Internal Radius on Channel Impingement Cooling for a Novel Internal Cooling Structure. Journal of Turbomachinery.DOI
224. Xing Yang, Qiang Zhao, Zhenping Feng (2021). Investigation and Application of Bio-Inspired Microscale Structures to Turbine Endwall for Enhancing Film Cooling Performance. Journal of Thermal Science and Engineering Applications.DOI
225. Kun Xiao, Juan He, Zhenping Feng (2021). Study on Flow and Heat Transfer Characteristics of a New-Proposed Alternating Elliptical U-Channel in the Midchord Region of Gas Turbine Blade. Journal of Engineering for Gas Turbines and Power.DOI
226. F Li, Z Liu, Zhenping Feng (2021). Impact of blade leading edge film coolant on the blade tip phantom cooling. IOP Conference Series Materials Science and Engineering.DOI
227. Zhigang Li, Zhi Fang, Jun Li, Zhenping Feng (2021). Static and Rotordynamic Characteristics for Two Types of Novel Mixed Liquid Damper Seals With Hole-Pattern/Pocket-Textured Stator and Helically Grooved Rotor. Journal of Engineering for Gas Turbines and Power.DOI
228. Qinghua Deng, Weilun Zhou, Wei Feng He, Juan He, Zhenping Feng (2021). COMPREHENSIVE VALIDATION OF A DECOUPLED ANALYSIS METHOD FOR A GAS TURBINE COMPOSITE COOLING STRUCTURE. Heat Transfer Research.DOI
229. Xing Yang, Qiang Zhao, Zhenping Feng (2021). TURBINE VANE ENDWALL FILM COOLING CONSIDERING FLOW NONUNIFORMITIES AND COOLANT INJECTION FROM UPSTREAM COMBUSTORS. Heat Transfer Research.DOI
230. Lv Ye, Xing Yang, Xianyun Chen, Zhenping Feng, Bengt Ake Sunden (2021). EFFECTS OF VARIOUS COOLANTS ON FLOW AND HEAT TRANSFER CHARACTERISTICS IN A ROUND-TIP PIN-FINNED INTERNAL CHANNEL. Heat Transfer Research.DOI
231. 杨星，郝子晗，丰镇平（2020）. 颗粒污染物在涡轮中的沉积效应. 《航空动力》.
232. 邓清华，胡乐豪，石志昊，丰镇平（2020）. 进汽参数对拉伐尔喷管中水蒸气自发凝结的影响. 《西安交通大学学报》.
233. 杨星，汪翔宇，丰镇平（2020）. 涡轮叶片综合冷却有效度评价指标研究. 《工程热物理学报》.
234. 肖坤，何娟，刘钊，丰镇平（2020）. 交叉扭转椭圆气膜孔冷却机理研究. 《工程热物理学报》.
235. 何娟，邓清华，高铁瑜，丰镇平（2020）. 周向角和直径比对切向双旋流冷却流动与传热特性的作用机理. 《西安交通大学学报》.
236. Bin Wu, Xing Yang, Zhao Liu, Zhenping Feng (2020). Effects of novel turning vanes on pressure loss and tip-wall heat transfer in an idealized U-bend channel. International Communications in Heat and Mass Transfer.DOI
237. Xing Yang, Qiang Zhao, Zhansheng Liu, Zhao Liu, Zhenping Feng (2020). Film Cooling Patterns over an Aircraft Engine Turbine Endwall with Slot Leakage and Discrete Hole Injection. International Journal of Heat and Mass Transfer.DOI
238. Feng Li, Zhao Liu, Zhenping Feng (2020). Turbine Blade Tip and Casing Phantom Cooling from Blade-Surface Film Coolant. Journal of Thermophysics and Heat Transfer.DOI
239. Juan He, Qinghua Deng, Weilun Zhou, Wei Feng He, Tieyu Gao, Zhenping Feng (2020). Conjugate Heat Transfer Characteristics of Double Wall Cooling on a Film Plate With Gradient Thickness.DOI
240. Fang Li, Shunsen Wang, Juan Di, Zhenping Feng (2020). Effect of Initial Surface Roughness on Water Erosion Resistance of Last Stage Blade Substrate of Steam Turbine.DOI
241. Zhansheng Liu, Kefeng Yang, Zhenping Feng (2020). Aero-Thermal Coupled Design Optimization of a Turbine Vane and the Effect on Heat Load of Endwall.DOI
242. Bin Wu, Xing Yang, Zhao Liu, Zhenping Feng (2020). Effect of Ribs on Heat Transfer and Pressure Drop in a U-Bend Channel With Double-Layer, Dome-Shaped Turning Vanes.DOI
243. Zhansheng Liu, Kefeng Yang, Xing Yang, Zhao Liu, Zhenping Feng (2020). Optimization of Fan-Shaped Film Cooling Holes for Enhancing Cooling Effectiveness Under Variable Coolant Inlet Pressure Ratios.DOI
244. Wenhao Zhang, Zhihao Wang, Zhiduo Wang, Zhenping Feng (2020). Study on Film Cooling Performance Improvement of NGV Leading Edge Subject to Distortion Profiles of Low NOx Combustor.DOI
245. Qiang Zhao, Xing Yang, Zhenping Feng (2020). Effects of Rim Seal Geometries on Aerodynamic Performance and Rotor Platform Cooling in a One-Stage Turbine.DOI
246. Zhi Fang, Zhigang Li, Jun Li, Zhenping Feng (2020). Numerical Investigation on the Static and Rotordynamic Characteristics for Two Types of Novel Mixed Helical Groove Seals.DOI
247. Kun Xiao, Juan He, Zhenping Feng (2020). Study on Flow and Heat Transfer Characteristics of a New-Proposed Alternating Elliptical U-Channel.DOI
248. Xing Yang, Zhansheng Liu, Qiang Zhao, Zhao Liu, Zhenping Feng, Terrence W. Simon (2020). Comparisons of Endwall Overall Effectiveness From Two Film Hole Distribution Patterns at Low and High Exit Mach Numbers. Journal of Turbomachinery.DOI
249. Zhao Liu, Feng Li, Zhixin Zhang, Zhenping Feng, Terrence W. Simon (2020). Conjugate Heat Transfer Predictions on Combined Impingement and Film Cooling of a Blade Leading Edge Model. Heat Transfer Engineering.DOI
250. Zhigang Li, Zhi Fang, Jun Li, Zhenping Feng (2020). Numerical Modeling of Static and Rotordynamic Characteristics for Three Types of Helically Grooved Liquid Annular Seals. Journal of vibration and acoustics.DOI
251. 邓清华，胡乐豪，李军，丰镇平（2019）. 大型发电技术发展现状及趋势. 《热力透平》.DOI
252. 邓清华，颜晓江，丰镇平（2019）. 基于多能互补的分布式能源系统实验教学平台. 《实验技术与管理》.DOI
253. 陶志，郭振东，李琛玺，宋立明，李军，丰镇平（2019）. 基于Kriging的不确定性量化及鲁棒性优化的研究. 《工程热物理学报》.
254. 邓清华，胡乐豪，李军，丰镇平（2019）. 超临界二氧化碳发电技术现状及挑战. 《热力透平》.DOI
255. 曹杨，张鹏飞，丰镇平（2019）. 基于定涡黏性连续伴随的叶栅气热优化方法研究. 《工程热物理学报》.
256. 肖坤，汪翔宇，丰镇平（2019）. 交叉扭转椭圆冷却通道流动和换热研究. 《工程热物理学报》.
257. 李琛玺，郭振东，宋立明，李军，丰镇平（2019）. 凹槽状叶顶气膜孔优化设计与知识挖掘. 《推进技术》.DOI
258. 阮有钢，刘战胜，高春，丰镇平（2019）. 燃气透平U型通道内部流动换热多目标优化. 《工程热物理学报》.
259. 韩万龙，王月明，丰镇平，李红智，姚明宇，张一帆（2019）. 超临界二氧化碳涡轮叶栅端壁附面层分层流动现象研究. 《热力发电》.DOI
260. 王志多，牟善聪，王志豪，丰镇平（2019）. 进口旋流对热斑和端壁槽缝泄漏流迁移影响的研究. 《工程热物理学报》.
261. Weilun Zhou, Qinghua Deng, Wei Feng He, Juan He, Zhenping Feng (2019). Conjugate heat transfer analysis for composite cooling structure using a decoupled method. International Journal of Heat and Mass Transfer.DOI
262. Xing Yang, Zhansheng Liu, Qiang Zhao, Zhao Liu, Zhenping Feng, Fushui Guo, Liang Ding (2019). Measurements of detailed heat transfer characteristics on a high-pressure turbine vane endwall with coolant injection. Experimental Thermal and Fluid Science.DOI
263. Xing Yang, Zhenping Feng, Terrence W. Simon (2019). Conjugate heat transfer modeling of a turbine vane endwall with thermal barrier coatings. The Aeronautical Journal.DOI
264. Chao Zhang, Jie Wang, Xin Luo, Liming Song, Jun Li, Zhenping Feng (2019). Experimentally measured effects of height and location of the vortex generator on flow and heat transfer characteristics of the flat-plate film cooling. International Journal of Heat and Mass Transfer.DOI
265. Wei Feng He, Qinghua Deng, Juan He, Tieyu Gao, Zhenping Feng (2019). Effects of Jetting Orifice Geometry Parameters and Channel Reynolds Number on Bended Channel Cooling for a Novel Internal Cooling Structure.DOI
266. Xing Yang, Qiang Zhao, Zhao Liu, Zhenping Feng, Terrence W. Simon (2019). Controlling Leakage Flows Over a Rotor Blade Tip Using Air-Curtain Injection: Part I — Aero-Thermal Performance of Rotor Tips.DOI
267. Chao Zhang, Jie Wang, Xin Luo, Liming Song, Jun Li, Zhenping Feng (2019). Experimental Investigation on the Flat-Plate Film Cooling Enhancement Using the Vortex Generator Downstream for the Cylindrical Hole and Fan-Shaped Hole Configurations.DOI
268. Qiang Zhao, Xing Yang, Zhao Liu, Zhenping Feng, Terrence W. Simon (2019). Controlling Leakage Flows Over a Rotor Blade Tip Using Air-Curtain Injection: Part II — Rotor Casing Film Cooling.DOI
269. Zhigang Li, Zhi Fang, Jun Li, Zhenping Feng (2019). Numerical Comparison of Static and Rotordynamic Characteristics for a Grooved-Stator/Smooth-Rotor and a Smooth-Stator/Grooved-Rotor Liquid Annular Seals.DOI
270. Zhi Fang, Zhigang Li, Jun Li, Zhenping Feng (2019). Numerical Investigations on the Static and Rotordynamic Characteristics of Hole-Pattern Seals With Annular or Pocket Grooves on Seal Stator.DOI
271. Xing Yang, Zhansheng Liu, Qiang Zhao, Zhao Liu, Zhenping Feng, Fushui Guo, Liang Ding, Terrence W. Simon (2019). Conjugate heat transfer measurements and predictions for the vane endwall of a high-pressure turbine with upstream purge flow. International Journal of Heat and Mass Transfer.DOI
272. Xing Yang, Zhao Liu, Zhansheng Liu, Zhenping Feng, Terrence W. Simon (2019). Turbine platform phantom cooling from airfoil film coolant, with purge flow. International Journal of Heat and Mass Transfer.DOI
273. Wanlong Han, Yifan Zhang, Hongzhi Li, Mingyu Yao, Yueming Wang, Zhenping Feng, Dong Zhou, Guangju Dan (2019). Aerodynamic design of the high pressure and low pressure axial turbines for the improved coal-fired recompression SCO2 reheated Brayton cycle. Energy.DOI
274. Qinghua Deng, Yu Jiang, Zhifeng Hu, Jun Li, Zhenping Feng (2019). Condensation and expansion characteristics of water steam and carbon dioxide in a Laval nozzle. Energy.DOI
275. Wanlong Han, Yueming Wang, Zhenping Feng, Hongzhi Li, Mingyu Yao, Yifan Zhang (2019). Study on Flow Characteristics of a Turbulent Boundary Layer and Vortex Structure of High Pressure Guide Vanes in SCO2 Turbines. Journal of Thermal Science.DOI
276. Lv Ye, Xing Yang, Bengt Ake Sunden, Zhenping Feng (2019). Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel. Numerical Heat Transfer Part A Applications.DOI
277. Wenjiao Qi, Qinghua Deng, Zhinan Chi, Lehao Hu, Qi Yuan, Zhenping Feng (2019). Influence of Disc Tip Geometry on the Aerodynamic Performance and Flow Characteristics of Multichannel Tesla Turbines. Energies.DOI
278. Wei Feng He, Qinghua Deng, Weilun Zhou, Tieyu Gao, Zhenping Feng (2019). Film cooling and aerodynamic performances of a turbine nozzle guide vane with trenched cooling holes. Applied Thermal Engineering.DOI
279. Xing Yang, Zhenping Feng, Terrence W. Simon (2019). Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew. Proceedings of ... European Conference on Turbomachinery Fluid Dynamics & Thermodynamics.DOI
280. 邓清华，蒋宇，李军，丰镇平（2018）. 超临界CO2动力循环实验关键技术研究:动力部件. 《热力透平》.
281. 邓清华，蒋宇，李军，丰镇平（2018）. 超临界CO2动力循环实验关键技术研究:循环方案. 《热力透平》.
282. 李琛玺，武晓龙，祝培源，宋立明，李军，丰镇平（2018）. 低压缸气动优化设计与数据挖掘（英文）. 《风机技术》.
283. 卢娟，丰镇平（2018）. 全三维轴流式透平叶栅离散伴随气动优化设计. 《燃气涡轮试验与研究》.
284. 韩万龙，丰镇平，王月明，李红智，周东，但光局，郭必敏（2018）. 超临界二氧化碳高压涡轮气动设计及性能. 《哈尔滨工业大学学报》.
285. 杨星，王岩，丰镇平（2018）. 1.5级透平动叶端壁泄漏流换热与冷却研究. 《工程热物理学报》.
286. 范小军，杜长河，周源远，李亮，丰镇平（2018）. 复合冲击和复合旋流冷却特性的对比研究. 《工程热物理学报》.
287. Wenjiao Qi, Qinghua Deng, Yu Jiang, Qi Yuan, Zhenping Feng (2018). Disc Thickness and Spacing Distance Impacts on Flow Characteristics of Multichannel Tesla Turbines. Energies.DOI
288. Zhendong Guo, Hongyan Bu, Liming Song, Jun Li, Zhenping Feng (2018). Experimental test of a 3D parameterized vane cascade with non-axisymmetric endwall. Aerospace Science and Technology.DOI
289. Xing Yang, Zhansheng Liu, Qiang Zhao, Zhao Liu, Zhenping Feng, Fushui Guo, Liang Ding, Terrence W. Simon (2018). Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling. Applied Thermal Engineering.DOI
290. Qinghua Deng, Shuai Shao, Lei Fu, Luan Haifeng, Zhenping Feng (2018). An Integrated Design and Optimization Approach for Radial Inflow Turbines—Part I: Automated Preliminary Design. Applied Sciences.DOI
291. Qinghua Deng, Shuai Shao, Lei Fu, Luan Haifeng, Zhenping Feng (2018). An Integrated Design and Optimization Approach for Radial Inflow Turbines—Part II: Multidisciplinary Optimization Design. Applied Sciences.DOI
292. Xing Yang, Zhao Liu, Zhansheng Liu, Terrence W. Simon, Zhenping Feng (2018). Endwall Film Cooling Performance for a First-Stage Guide Vane With Upstream Combustor Walls and Inlet Injection. Journal of Thermal Science and Engineering Applications.DOI
293. Zhiduo Wang, Dian Wang, Zhihao Wang, Zhenping Feng (2018). Heat transfer analyses of film-cooled HP turbine vane considering effects of swirl and hot streak. Applied Thermal Engineering.DOI
294. Wenjiao Qi, Qinghua Deng, Yu Jiang, Zhenping Feng, Qi Yuan (2018). Aerodynamic performance and flow characteristics analysis of Tesla turbines with different nozzle and outlet geometries. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
295. Zhansheng Liu, Xing Yang, Chun Yan Gao, Zhao Liu, Zhenping Feng (2018). Aero-Thermal Coupled Design Optimization of the Non-Axisymmetric Endwall for a Gas Turbine Blade.DOI
296. Bin Wu, Xing Yang, Lv Ye, Zhao Liu, Yu Jiang, Qiang Zhao, Zhenping Feng (2018). Flow and Heat Transfer Characteristics in Models of Turbine Blade Tip-Walls With Three Kinds of Turning Vanes.DOI
297. Xiangyu Wang, Kun Xiao, Zhenping Feng (2018). Study on Cooling Characteristics of an Internal Cooling Structure With a Sloping Sheet for Gas Turbine Blade.DOI
298. Jörg Starzmann, Fiona R. Hughes, Sebastian Schuster, Alexander John White, Jan Halama, Vladimír Hric, Michal Kolovratník, Hoon Lee, Libor Sova, M. Šťastný, Marius Grübel, Markus Schatz, Damian M. Vogt, Yogini Patel, Giteshkumar Patel, Teemu Turunen-Saaresti, В. Г. Грибин, В. А. Тищенко, I. Yu. Gavrilov, Changhyun Kim, Jehyun Baek, Xiao-Ming Wu, Jiandao Yang, Sławomir Dykas, Włodzimierz Wróblewski, Satoru Yamamoto, Zhenping Feng, Liang Li (2018). Results of the International Wet Steam Modeling Project. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
299. Xing Yang, Zhao Liu, Zhansheng Liu, Zhenping Feng, Terrence W. Simon (2018). Combustor Wall Coolant Discharge Effects on Turbine Vane Endwall Curtain Cooling. Journal of Thermophysics and Heat Transfer.DOI
300. 陶志，祝培源，宋立明，李军，丰镇平（2017）. 三角形涡发生器综合换热性能全局优化和知识挖掘. 《推进技术》.
301. 王志多，王典，张文豪，王志豪，丰镇平（2017）. 进口总压不均匀性对燃气透平端壁气热特性影响的研究. 《推进技术》.
302. 祝培源，陶志，宋立明，李军，丰镇平（2017）. 间隙射流对端壁冷却和传热特性影响的研究. 《推进技术》.
303. 祝培源，宋立明，李军，丰镇平（2017）. 间隙位置和几何对端壁冷却性能的影响. 《航空学报》.
304. 黄琰，晏鑫，何坤，李军，丰镇平（2017）. 压力面侧小翼结构对凹槽叶顶冷却传热性能的影响. 《西安交通大学学报》.
305. 杜长河，范小军，李亮，丰镇平（2017）. 旋转半径和叶片安装角对动叶旋流冷却流动和传热特性的影响. 《西安交通大学学报》.
306. 李琛玺，王静，宋立明，李军，丰镇平（2017）. 高压比离心叶轮气动强度多学科优化与知识挖掘. 《西安交通大学学报》.
307. 张超，宋英杰，宋立明，李军，丰镇平（2017）. 涡发生器高度对气膜冷却性能影响的实验研究. 《西安交通大学学报》.
308. 杜长河，范小军，李亮，丰镇平（2017）. 抽吸孔对旋流和冲击冷却流动传热特性的影响. 《西安交通大学学报》.
309. 张峰，王新军，李军，丰镇平（2017）. 肋片-凹槽通道内的流动与换热特性数值研究. 《工程热物理学报》.
310. 杨星，刘钊，刘战胜，丰镇平（2017）. 端壁错位对端壁泄漏流冷却的影响研究. 《工程热物理学报》.
311. 杨星，刘钊，刘战胜，丰镇平（2017）. 端壁通道间隙对端壁泄漏流冷却的影响. 《工程热物理学报》.
312. 宋英杰，张超，宋立明，李军，丰镇平（2017）. 射流角与吹风比影响涡发生器强化气膜冷却性能的实验研究. 《推进技术》.
313. Qinghua Deng, Deng-Hui Wang, Hong-Ling Zhao, W.-T. Huang, S. Shao, Zhenping Feng（2017）. 多目的最適化を用いた超臨界CO_2再圧縮Braytonサイクルの性能に関する研究【Powered by NICT】.
314. Lei Fu, Zhenping Feng, Guojun Li (2017). Investigation on design flow of a millimeter-scale radial turbine for micro gas turbine. Microsystem Technologies.DOI
315. Zhigang Li, Jun Li, Zhenping Feng (2017). Numerical Investigation on the Leakage and Static Stability Characteristics of Pocket Damper Seals at High Eccentricity Ratios. Journal of Engineering for Gas Turbines and Power.DOI
316. Lei Fu, Zhenping Feng, Guojun Li (2017). Discussions on problem analysis and solutions of a micro turbine test. Microsystem Technologies.DOI
317. Peiyuan Zhu, Liming Song, Jun Li, Zhenping Feng (2017). Effects of upstream slot geometry on the endwall aerothermal performance of a gas turbine blade under different ejection angle conditions. International Journal of Heat and Mass Transfer.DOI
318. Liming Song, Zhendong Guo, Jun Li, Zhenping Feng (2017). Optimization and Knowledge Discovery of a Three-Dimensional Parameterized Vane with Nonaxisymmetric Endwall. Journal of Propulsion and Power.DOI
319. Xing Yang, Zhao Liu, Zhansheng Liu, Zhenping Feng, Terrence W. Simon (2017). Influence of Discharge from Combustor Walls on Curtain Cooling for a First-Stage Turbine Vane Endwall. AIAA/SAE/ASEE Joint Propulsion Conference (JPC).DOI
320. Weilun Zhou, Qinghua Deng, Wei Feng He, Zhenping Feng (2017). Effects of Hole Pitch to Diameter Ratio P/D of Impingement and Film Hole on Laminated Cooling Effectiveness.DOI
321. Chenxi Li, Zhendong Guo, Liming Song, Jun Li, Zhenping Feng (2017). Design Optimization of a 3D Parameterized Vane Cascade With Non-Axisymmetric Endwall Based on a Modified EGO Algorithm and Data Mining Techniques.DOI
322. Lv Ye, Zhao Liu, Chun Yan Gao, Xing Yang, Zhenping Feng (2017). Numerical Study on Heat Transfer Performance of a New-Proposed Pin-Fin in an Internal Channel.DOI
323. Y.D. Song, Zhendong Guo, Liming Song, Jun Li, Zhenping Feng (2017). Knowledge-Based Aero-Thermal Multi-Disciplinary Design Optimization of a High Temperature Blade.DOI
324. Zhenlin Wang, Xiangsheng Li, Zhenping Feng (2017). Interaction Between Precessing Vortex Core and Thermoacoustic Coupling in a Lab-Scale Lean Premixed Gas Turbine Combustor: Numerical Simulation Studies.DOI
325. Minyan Yin, Jun Li, Liming Song, Zhenping Feng (2017). Numerical Investigations of the Long Blade Performance Using RANS Solution and FEA Method Coupled With One-Way and Two-Way Fluid-Structure Interaction Models.DOI
326. Mingyan Yin, Jun Li, Liming Song, Bin Li, Gangyun Zhong, Xiaoping Fan, Qi Guo Sun, Zhenping Feng (2017). Aerodynamic Optimization Design of Last Stage Long Blade for Steam Turbine Using Self-Adaptive Differential Evolution Algorithms and RANS Solutions. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines.DOI
327. Lei Fu, Zhenping Feng, Guojun Li (2017). Experimental investigation on overall performance of a millimeter-scale radial turbine for micro gas turbine. Energy.DOI
328. Yu Yang, Zhenping Feng, Runda Lin (2017). A prediction method of temperature distribution and thermal stress for the throttle turbine rotor and its application. Thermal Science.DOI
329. Xing Yang, Zhao Liu, Zhansheng Liu, Zhenping Feng (2017). INTERACTIONS OF COMBUSTOR WALL AND FILM COOLING ON ENDWALL FOR A FIRST-STAGE VANE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
330. Zhao Liu, Jun Li, Zhenping Feng, Terrence W. Simon (2017). A NUMERICAL STUDY ON THE EFFECTS OF NUMBER OF JETS ON SWIRL COOLING OF A GAS TURBINE BLADE LEADING EDGE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
331. 张元桥，李彬，杨建道，史立群，李军，丰镇平（2016）. 末级长叶片透平级气动性能的数值研究. 《热力透平》.
332. 丰镇平，赵航，张汉桢，邓清华（2016）. 超临界二氧化碳动力循环系统及关键部件研究进展. 《热力透平》.
333. 邵帅，邓清华，丰镇平（2016）. 向心透平初始设计自动进化寻优方法与变工况性能预测模型. 《工程热物理学报》.
334. 杜昆，李军，宋立明，丰镇平（2016）. 跨音速涡轮静叶上端壁结构对动叶顶部气动换热特性的影响. 《工程热物理学报》.
335. 刘兆方，王志多，丰镇平（2016）. 燃气透平进口旋流对热斑迁移及动叶热负荷影响的研究. 《工程热物理学报》.
336. 王志多，张文豪，刘兆方，张辰，丰镇平（2016）. 存在热斑及总压梯度时静叶正弯对透平级气热特性的影响. 《工程热物理学报》.
337. 张鹏飞，卢娟，丰镇平（2016）. 基于定涡黏性假设的连续伴随优化方法研究. 《工程热物理学报》.
338. 宋英杰，郭振东，宋立明，李军，丰镇平（2016）. 显著变量识别与高温叶片多学科设计优化方法. 《推进技术》.
339. 黄雯婷，赵航，邓清华，丰镇平（2016）. 超临界CO2部分预冷循环特性分析及优化研究. 《工程热物理学报》.
340. 李志刚，李军，丰镇平（2016）. 进口防旋板对孔型密封非定常气流激振特性的影响. 《西安交通大学学报》.
341. 杜长河，范小军，李亮，丰镇平（2016）. 喷射角度和喷嘴数对旋流冷却流动与传热特性的影响. 《西安交通大学学报》.
342. Liang Li, Xiaoming Wu, Jiandao Yang, Zhenping Feng (2016). Effects of location,shape and width of a suction slot on the water removal performance of a hollow stator blade. Wet Steam Conference 2016 Proceedings.DOI
343. Qinghua Deng, Dongqi Wang, Hao Feng Zhao, Wenge Huang, Shuai Shao, Zhenping Feng (2016). Study on performances of supercritical CO2 recompression Brayton cycles with multi-objective optimization. Applied Thermal Engineering.DOI
344. Zhao Liu, Jun Li, Zhenping Feng, Terrence Simon (2016). Numerical study on the effect of jet spacing on the Swirl flow and heat transfer in the turbine airfoil leading edge region. Numerical Heat Transfer Part A Applications.DOI
345. Pengfei Zhang, Juan Lu, Liming Song, Zhenping Feng (2016). Study on continuous adjoint optimization with turbulence models for aerodynamic performance and heat transfer in turbomachinery cascades. International Journal of Heat and Mass Transfer.DOI
346. Zhiduo Wang, Dian Wang, Zhaofang Liu, Zhenping Feng (2016). Numerical analysis on effects of inlet pressure and temperature non-uniformities on aero-thermal performance of a HP turbine. International Journal of Heat and Mass Transfer.DOI
347. Zhigang Li, Jun Li, Zhenping Feng (2016). Labyrinth Seal Rotordynamic Characteristics Part II: Geometrical Parameter Effects. Journal of Propulsion and Power.DOI
348. Zhigang Li, Jun Li, Zhenping Feng (2016). Labyrinth Seal Rotordynamic Characteristics Part I: Operational Conditions Effects. Journal of Propulsion and Power.DOI
349. Weilun Zhou, Qinghua Deng, Zhenping Feng (2016). Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part A — Effects of Surface Curvature.DOI
350. Changhe Du, Liang Li, XiuXiu Chen, Xiaojun Fan, Zhenping Feng (2016). Numerical Study on Effects of Jet Nozzle Angle and Number on Vortex Cooling Behavior for Gas Turbine Blade Leading Edge.DOI
351. Wenjiao Qi, Qinghua Deng, Zhenping Feng, Qi Yuan (2016). Influence of Disc Spacing Distance on the Aerodynamic Performance and Flow Field of Tesla Turbines. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines.DOI
352. Qinghua Deng, Weilun Zhou, Zhenping Feng (2016). Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part B — Effects of Film Hole Incline Angle.DOI
353. Xing Yang, Zhao Liu, Zhansheng Liu, Bin Wu, Zhenping Feng (2016). Influence of Jet Impingement Configurations and Aerothermal Variables on Film Cooling.DOI
354. Peiyuan Zhu, Yong Gang Yan, Liming Song, Jun Li, Zhenping Feng (2016). Uncertainty Quantification of Heat Transfer for a Highly Loaded Gas Turbine Blade Endwall Using Polynomial Chaos.DOI
355. Zhiduo Wang, Wenhao Zhang, Zhaofang Liu, Chen Zhang, Zhenping Feng (2016). Numerical Study on Aero-Thermal Performance of HP Turbine Endwalls Under Influence of Hot Streak and High Mainstream Turbulence.DOI
356. Jun Li, Bin Li, Liming Song, Zhenping Feng (2016). Multidisciplinary Optimization Design of Long Blade Turbine Stage Based on Parallel Self-Adaptive Multi-Objective Differential Evolution Algorithm. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines.DOI
357. Mingyan Yin, Chen Yang, Liu Meng, Wei Ping Yan, Zhuhai Zhong, Jun Li, Zhenping Feng (2016). Numerical Analysis on the Swirl Flows in the Exhaust Hood of Steam Turbine and Optimization Design. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines.DOI
358. Jun Li, Wenhao Huo, Zhenping Feng (2016). Investigation on the Effect of Cooling Hole Structure on the Steam Cooling Performance of the Intermediate Pressure Turbine Stages. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines.DOI
359. Zhao Liu, Xing Yang, Jun Li, Zhenping Feng, Terrence W. Simon (2016). Effect of Bleed Position and Bleed Angle on Impingement Cooling of a Spherical-Dimpled Surface.DOI
360. Lv Ye, Zhao Liu, Xiangyu Wang, Zhenping Feng (2016). Numerical Study on Flow and Heat Transfer of a Cooled First Stage Vane of a Gas Turbine.DOI
361. Hang Zhao, Qinghua Deng, Wenting Huang, Dian Wang, Zhenping Feng (2016). Thermodynamic and Economic Analysis and Multi-objective Optimization of Supercritical CO2 Brayton Cycles. Journal of Engineering for Gas Turbines and Power.DOI
362. 石慧，李亮，丰镇平（2015）. 污垢沉积影响叶片表面换热的研究. 《航空动力学报》.
363. 谢永慧，张明辉，周琴，张荻，丰镇平（2015）. 透平复杂阻尼结构叶片强度与振动特性优化研究. 《热力透平》.
364. 张鹏飞，丰镇平（2015）. 基于Spalart-Allmaras模型的全湍流伴随系统研究. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
365. 杜长河，李亮，丰镇平（2015）. 叶片蒸汽冷却耦合换热特性的数值研究. 《动力工程学报》.
366. 赵航，邓清华，黄雯婷，郑宽宽，丰镇平（2015）. 超临界二氧化碳离心压缩机叶顶两相流动研究. 《工程热物理学报》.
367. 郭振东，宋立明，李军，李国君，丰镇平（2015）. 基于子元模型的全局优化与设计空间知识挖掘方法. 《推进技术》.
368. 杜长河，李森，李亮，丰镇平（2015）. 叶片前缘旋流蒸汽冷却流动和传热的数值研究. 《西安交通大学学报》.
369. 齐文娇，邓清华，丰镇平，袁奇（2015）. 盘式透平数值方法验证及流动特性分析. 《工程热物理学报》.
370. 王志多，刘兆方，丰镇平（2015）. 不同湍流模型对燃气透平静叶及动叶叶顶传热预测精度的研究. 《工程热物理学报》.
371. 刘战胜，杨星，邵帅，刘钊，丰镇平（2015）. 基于神经网络的平板气膜孔冷却性能分析及优化研究. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
372. 杜长河，范小军，李亮，丰镇平（2015）. 喷嘴长宽比和雷诺数对旋流冷却流动与传热特性的影响. 《西安交通大学学报》.
373. 赵航，邓清华，王典，丰镇平（2015）. 超临界二氧化碳离心压缩机应力数值分析. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
374. 刘兆方，王志多，丰镇平（2015）. 叶栅通道内热斑迁移受动静干涉和叶顶间隙高度影响的研究. 《工程热物理学报》.
375. 宋英杰，聂俊，郭振东，宋立明，李军，丰镇平（2015）. 高温叶片换热性能不确定性量化. 《工程热物理学报》.
376. 王昌叶，刘钊，叶绿，丰镇平（2015）. 叶片冲击/气膜复合冷却的数值研究. 《工程热物理学报》.
377. 郑宽宽，赵航，丰镇平（2015）. 超临界二氧化碳离心压气机内部流动特性分析. 《工程热物理学报》.
378. Zhiduo Wang, Zhaofang Liu, Zhenping Feng (2015). Influence of Mainstream Turbulence Intensity on Heat Transfer Characteristics of a High Pressure Turbine Stage With Inlet Hot Streak. Journal of Turbomachinery.DOI
379. Zhigang Li, Jun Li, Zhenping Feng (2015). Numerical Comparison of Rotordynamic Characteristics for a Fully Partitioned Pocket Damper Seal and a Labyrinth Seal With High Positive and Negative Inlet Preswirl. Journal of Engineering for Gas Turbines and Power.DOI
380. Xing Yang, Zhao Liu, Zhansheng Liu, Zhansheng Liu, Zhansheng Liu, Zhenping Feng (2015). Numerical analysis on effects of coolant swirling motion on film cooling performance. International Journal of Heat and Mass Transfer.DOI
381. Zhao Liu, Jun Li, Zhenping Feng, Terrence Simon (2015). Numerical study on the effect of jet nozzle aspect ratio and jet angle on swirl cooling in a model of a turbine blade leading edge cooling passage. International Journal of Heat and Mass Transfer.DOI
382. Hanzhen Zhang, Hang Zhao, Qinghua Deng, Zhenping Feng (2015). Aerothermodynamic Design and Numerical Investigation of Supercritical Carbon Dioxide Turbine. Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy.DOI
383. Hang Zhao, Qinghua Deng, Hanzhen Zhang, Zhenping Feng (2015). The Influence of Tip Clearance on Supercritical CO2 Centrifugal Compressor Performance. Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy.DOI
384. Pengfei Zhang, Juan Lu, Zhiduo Wang, Liming Song, Zhenping Feng (2015). Adjoint-Based Optimization Method With Linearized SST Turbulence Model and a Frozen Gamma-Theta Transition Model Approach for Turbomachinery Design.DOI
385. Bo Qiu, Jun Li, Zhenping Feng (2015). Investigation of Conjugate Heat Transfer in Brush Seals Using Porous Media Approach Under Local Thermal Non-Equilibrium Conditions.DOI
386. Zhendong Guo, Liming Song, Jun Li, Guojun Li, Zhenping Feng (2015). Research on Meta-Model Based Global Design Optimization and Data Mining Methods.DOI
387. Zhaofang Liu, Zhiduo Wang, Zhenping Feng (2015). Effects of Inlet Swirl on Hot Streak Migration Across Tip Clearance and Heat Transfer on Rotor Blade Tip.DOI
388. Xing Yang, Zhao Liu, Zhenping Feng (2015). Effect of Film Extraction on Impingement Heat Transfer Characteristics of Jet Arrays on Spherical-Dimpled Surfaces.DOI
389. Zhiduo Wang, Zhaofang Liu, Zhenping Feng (2015). Influence of Mainstream Turbulence Intensity on Heat Transfer Characteristics of a HP Turbine Stage With Inlet Hot Streak.DOI
390. Zhigang Li, Jun Li, Zhenping Feng (2015). Comparisons of Rotordynamic Characteristics Predictions for Annular Gas Seals Using the Transient Computational Fluid Dynamic Method Based on Different Single-Frequency and Multifrequency Rotor Whirling Models. Journal of Tribology.DOI
391. Lei Fu, Zhenping Feng, Guojun Li, Qinghua Deng, Yan Shi, Tieyu Gao (2015). Experimental validation of an integrated optimization design of a radial turbine for micro gas turbines. Journal of Zhejiang University. Science A.DOI
392. Xing Yang, Zhao Liu, Zhenping Feng (2015). Numerical Evaluation of Novel Shaped Holes for Enhancing Film Cooling Performance. ASME Journal of Heat and Mass Transfer.DOI
393. 马群毅，邓清华，丰镇平（2014）. 基于座头鲸胸鳍结节的仿生透平叶片内流特性研究. 《高等学校工程热物理第二十届全国学术会议论文集——热流体力学专辑》.
394. 谢永慧，常姣姣，张明辉，张荻，丰镇平（2014）. 大功率汽轮机高温叶片蠕变特性数值研究. 《热力透平》.
395. 文柯淞，杨建道，杨锐，史立群，李军，丰镇平（2014）. 超超临界二次再热高压缸流热耦合特性研究. 《热力透平》.
396. 丰镇平，王志多，刘兆方（2014）. 燃气透平进口热斑迁移及其影响机制研究进展. 《中国电机工程学报》.
397. 宋英杰，余广霖，宋立明，李军，丰镇平（2014）. 高温叶片流热固耦合分析及多目标多学科设计优化. 《工程热物理学报》.
398. 晏鑫，李军，丰镇平（2014）. 孔型阻尼密封非定常气流激振特性的研究. 《工程热物理学报》.
399. 刘钊，杨星，丰镇平（2014）. 燃气轮机透平叶片传热和冷却研究:气膜冷却. 《热力透平》.
400. 杨星，刘钊，丰镇平（2014）. 燃气轮机透平叶片传热和冷却研究:端壁冷却. 《热力透平》.
401. 何坤，晏鑫，李军，丰镇平（2014）. 燃气透平叶栅端壁传热特性的数值研究. 《工程热物理学报》.
402. 刘娜，刘钊，丰镇平（2014）. U型通道内部流动与换热的数值研究. 《工程热物理学报》.
403. 李彬，宋立明，李军，丰镇平（2014）. 长叶片透平级多学科多目标优化设计. 《西安交通大学学报》.
404. 陶加银，高庆，宋立明，晏鑫，李军，丰镇平（2014）. 基于附加示踪变量法的涡轮轮缘密封非定常封严特性研究. 《工程热物理学报》.
405. Zhao Liu, Jun Li, Zhenping Feng (2014). Numerical Study of Swirl Cooling in a Turbine Blade Leading-Edge Model. Journal of Thermophysics and Heat Transfer.DOI
406. Zhigang Li, Jun Li, Zhenping Feng (2014). Numerical Investigations on the Leakage and Rotordynamic Characteristics of Pocket Damper Seals—Part I: Effects of Pressure Ratio, Rotational Speed, and Inlet Preswirl. Journal of Engineering for Gas Turbines and Power.DOI
407. Zhigang Li, Jun Li, Zhenping Feng (2014). Numerical Investigations on the Leakage and Rotordynamic Characteristics of Pocket Damper Seals—Part II: Effects of Partition Wall Type, Partition Wall Number, and Cavity Depth. Journal of Engineering for Gas Turbines and Power.DOI
408. Hang Zhao, Qinghua Deng, Kuankuan Zheng, Hanzhen Zhang, Zhenping Feng (2014). Numerical Investigation on the Flow Characteristics of a Supercritical CO2 Centrifugal Compressor.DOI
409. Hanzhen Zhang, Shuai Shao, Hang Zhao, Zhenping Feng (2014). Thermodynamic Analysis of a SCO2 Part-Flow Cycle Combined With an Organic Rankine Cycle With Liquefied Natural Gas as Heat Sink.DOI
410. Hao Sun, Jun Li, Liming Song, Zhenping Feng (2014). Non-Axisymmetric Turbine Endwall Aerodynamic Optimization Design: Part I — Turbine Cascade Design and Experimental Validations.DOI
411. Hao Sun, Liming Song, Jun Li, Zhenping Feng (2014). Non-Axisymmetric Turbine Endwall Aerodynamic Optimization Design: Part II — Turbine Stage Design and Unsteady Flow Characteristics Analysis.DOI
412. Zhendong Guo, Zhiming Zhou, Liming Song, Jun Li, Zhenping Feng (2014). Aerodynamic Analysis and Multi-Objective Optimization Design of a High Pressure Ratio Centrifugal Impeller.DOI
413. Liu-xi Cai, Shun-sen Wang, Juan Di, Jing-ru Mao, Zhenping Feng, Junjie Zhang, Ya-tao Xu (2014). Study of Erosion Characteristics of Solid Particles in the First Reheat Stage Blades of a Supercritical Steam Turbine.DOI
414. Y.D. Song, Zhendong Guo, Liming Song, Jun Li, Zhenping Feng (2014). Multi-Objective and Multi-Disciplinary Optimization of Gas Turbine Blade Profile and Cooling System Using Conjugate Heat Transfer Analysis.DOI
415. Zhao Liu, Lv Ye, Zhenping Feng (2014). Numerical Study of Impingement and Film Composite Cooling on Blade Leading Edge.DOI
416. Jiandao Yang, Taowen Chen, Jun Li, Zhenping Feng (2014). Aerodynamic Optimization Design of Exhaust Hood Diffuser for Steam Turbine With Three-Dimensional Reynolds-Averaged Navier-Stokes Solutions.DOI
417. Qing Hong Gao, Jun Li, Zhenping Feng (2014). Effects of Coolant Injection Configuration on the Cooling Performance of Gas Turbine Stage Using CFD and Conjugate Heat Transfer Method.DOI
418. Zhao Liu, Lv Ye, Changyee Wang, Zhenping Feng (2014). Numerical simulation on impingement and film composite cooling of blade leading edge model for gas turbine. Applied Thermal Engineering.DOI
419. Xin Yan, Kun He, Jun Li, Zhenping Feng (2014). Numerical techniques for computing nonlinear dynamic characteristic of rotor-seal system. Journal of Mechanical Science and Technology.DOI
420. Xin Yan, Jun Li, Kun He, Zhenping Feng, Yizhi Fan, Xianyou Shang (2014). Investigations on water condensation in the main steam pipe of a pressurized water reactor nuclear power station: Part I – Experimental tests. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
421. 李浦，袁奇，高进，刘昕，丰镇平（2013）. 周向拉杆转子轮盘端面齿接触应力分析. 《热力透平》.
422. 李军，李志刚，晏鑫，宋立明，丰镇平，江生科，范小平，李熙斌，王建录（2013）. 汽轮机排汽缸性能分析和气动设计的研究进展. 《热力透平》.
423. 时和双，邵帅，邓清华，丰镇平，程凯，彭泽瑛（2013）. 汽轮机末两级非定常流动的数值研究. 《高等学校工程热物理第十届全国学术会议》.
424. 张辰，卢娟，陈红梅，丰镇平（2013）. 四级工业透平叶栅的三维级环境气动优化. 《高等学校工程热物理第十届全国学术会议》.
425. 丰镇平，厉海涛，宋立明，李颖晨（2013）. 基于控制理论的透平叶栅气动反设计优化. 《中国科学:技术科学》.
426. 邵帅，邓清华，时和双，丰镇平，程凯，彭泽瑛（2013）. 不同容积流量下汽轮机低压缸末三级定常流动数值研究. 《西安交通大学学报》.
427. 卢娟，张朝磊，丰镇平（2013）. 离散伴随气动优化设计方法的紊流扩展. 《西安交通大学学报》.
428. 孙皓，宋立明，李军，丰镇平（2013）. 非轴对称端壁透平级气动性能的数值研究. 《西安交通大学学报》.
429. 霍文浩，晏鑫，李军，丰镇平（2013）. 超超临界汽轮机高压缸旁路冷却系统冷却特性研究. 《西安交通大学学报》.
430. 霍文浩，晏鑫，李军，丰镇平（2013）. 超超临界汽轮机高压缸旁路冷却系统流动特性的研究. 《西安交通大学学报》.
431. 袁奇，高进，李浦，刘洋，丰镇平（2013）. 重型燃气轮机转子结构及动力学特性研究综述. 《热力透平》.
432. 刘钊，杨星，丰镇平（2013）. 燃气轮机透平叶片传热和冷却研究:内部冷却. 《热力透平》.
433. 文柯淞，杨建道，杨锐，史立群，李军，丰镇平（2013）. 超超临界二次再热中压缸流热耦合特性研究. 《中国动力工程学会透平专业委员会2013年学术研讨会》.
434. 程凯，王恭义，余德启，丰镇平，由小川（2013）. 汽轮机长叶片有损寿命预测. 《能源高效清洁利用及新能源技术——2012动力工程青年学术论坛暨第五届青年学术年会》.
435. 厉海涛，丰镇平（2013）. 基于连续伴随方法的轴流式透平叶栅气动优化设计. 《能源高效清洁利用及新能源技术——2012动力工程青年学术论坛暨第五届青年学术年会》.
436. 邱波，李军，丰镇平（2013）. 考虑刷丝变形的刷式密封摩擦热效应研究. 《工程热物理学报》.
437. 宋立明，郭振东，李军，丰镇平（2013）. 小展弦比调节级三维多目标气动优化设计. 《工程热物理学报》.
438. Feng Zhenping (2013). Contact Stress Analysis of Curvic Coupling of Circumferential Tie Rotor. Thermal Turbine.
439. Xin Yan, Lijie Lei, Jun Li, Zhenping Feng (2013). Effect of Bending and Mushrooming Damages on Heat Transfer Characteristic in Labyrinth Seals.DOI
440. Zhao Liu, Jun Li, Zhenping Feng (2013). Numerical Study on the Effect of Jet Slot Height on Flow and Heat Transfer of Swirl Cooling in Leading Edge Model for Gas Turbine Blade.DOI
441. Qinghua Deng, Wenjiao Qi, Zhenping Feng (2013). Improvement of a Theoretical Analysis Method for Tesla Turbines.DOI
442. Shuai Shao, Qinghua Deng, Heshuang Shi, Zhenping Feng, Kai Cheng, Zeying Peng (2013). Numerical Investigation on Flow Characteristics of Low Pressure Exhaust Hood Under Off-Design Conditions for Steam Turbines.DOI
443. Shuai Shao, Qinghua Deng, Zhenping Feng (2013). Aerodynamic Optimization of the Radial Inflow Turbine for a 100kW-Class Micro Gas Turbine Based on Metamodel-Semi-Assisted Method.DOI
444. Jun Li, Zhigang Li, Zhenping Feng (2013). Effects of the Last Stage Rotor Tip Leakage Flow on the Aerodynamic Performance of the Exhaust Hood for Steam Turbines.DOI
445. Liu-xi Cai, Shun-sen Wang, Lei Zhang, Jing-ru Mao, Zhenping Feng, Junjie Zhang, Ya-tao Xu (2013). Influence of Oxide Particle Size on the Erosion of the Control Stage Nozzle in a Supercritical Steam Turbine.DOI
446. Wenhao Huo, Jun Li, Jiandao Yang, Liqun Shi, Zhenping Feng (2013). Numerical Investigations on the Cooling Performance of the Internal Bypass Cooling System of the Ultra-Supercritical Steam Turbines Using CFD and Conjugate Heat Transfer Method.DOI
447. Pengfei Zhang, Haitao Li, Zhenping Feng (2013). Study and Verification of Continuous Adjoint System for Aerodynamic Optimization in Turbomachinery Cascades.DOI
448. Juan Lu, Chaolei Zhang, Zhenping Feng (2013). Aerodynamic Optimization and Inverse Design of 2D and 3D Turbine Cascades Using the Discrete Adjoint Method.DOI
449. Zhaofang Liu, Zhao Liu, Zhenping Feng (2013). Unsteady Analysis on the Effects of Tip Clearance Height on Hot Streak Migration Across Rotor Blade Tip Clearance.DOI
450. 石䶮，丰镇平（2012）. 一级半轴流式透平级内部若干非定常流动现象的试验研究. 《热力透平》.
451. 谢永慧，马丹丹，张荻，丰镇平（2012）. 汽轮机叶片枞树型叶根轮缘优化研究. 《热力透平》.
452. 程凯，王恭义，彭泽瑛，阳虹，何阿平，丰镇平（2012）. 运用现代CAE工具开发大容量汽轮机的关键部件——末级长叶片. 《热力透平》.
453. 孙皓，李军，李国君，丰镇平（2012）. 非轴对称端壁造型技术在透平中的应用和发展. 《热力透平》.
454. 李志刚，李军，丰镇平（2012）. 高转速袋型阻尼密封泄漏的特性. 《航空动力学报》.
455. 李军，李志刚，晏鑫，宋立明，丰镇平，江生科，范小平，李熙斌，王建录（2012）. 大功率汽轮机低压排汽缸性能分析和气动设计的研究进展. 《中国动力工程学会透平专业委员会2012年学术研讨会》.
456. 谢永慧，张明辉，周琴，张荻，丰镇平（2012）. 透平机械叶根轮缘结构优化研究进展. 《中国动力工程学会透平专业委员会2012年学术研讨会》.
457. 李志刚，李军，丰镇平（2012）. 袋型阻尼密封转子动力特性的多频单向涡动预测模型. 《西安交通大学学报》.
458. 蔡柳溪，王顺森，毛靖儒，丰镇平，张俊杰，徐亚涛（2012）. 静叶斜置对高参数汽轮机再热后第一级叶栅冲蚀的影响. 《西安交通大学学报》.
459. 孙皓，宋立明，李军，丰镇平（2012）. 小展弦比叶栅非轴对称端壁造型及气动性能的数值研究. 《西安交通大学学报》.
460. 晏鑫，李军，丰镇平（2012）. 蜂窝密封内耦合传热特性的研究. 《工程热物理学报》.
461. 柴秀妮，李亮，陈群飞，丰镇平（2012）. 非平衡凝结流线曲率法通流程序开发及应用. 《工程热物理学报》.
462. 李怀志，邓清华，付雷，任平，丰镇平（2012）. 向心透平级叶轮内三维复杂流动的数值研究. 《工程热物理学报》.
463. 张朝磊，卢娟，丰镇平（2012）. 基于离散伴随方法的透平叶栅反设计. 《工程热物理学报》.
464. 张朝磊，厉海涛，丰镇平（2012）. 基于离散伴随方法的透平叶栅气动优化设计. 《工程热物理学报》.
465. 晏鑫，李军，丰镇平（2012）. 迷宫密封传热特性的数值研究. 《西安交通大学学报》.
466. 邱波，李军，陈春新，丰镇平（2012）. 基于CFD和FEM方法的刷式密封传热特性研究. 《工程热物理学报》.
467. Feng Zhenping (2012). Application and Development of the Non-Axisymmetrical Endwall Contouring in the Turbomachinery. Thermal Turbine.
468. Feng Zhenping (2012). Leakage flow of pocket damper seal at high rotational speed. Journal of Aerospace Power.
469. Zhenping Feng, Haitao Li, Liming Song, YingChen Li (2012). Aerodynamic inverse design optimization for turbine cascades based on control theory. Science China Technological Sciences.DOI
470. Jin Gao, Qi Yuan, Pu Li, Zhenping Feng, Hongtao Zhang, Zhiqiang Lv (2012). Effects of Bending Moments and Pretightening Forces on the Flexural Stiffness of Contact Interfaces in Rod-Fastened Rotors. Journal of Engineering for Gas Turbines and Power.DOI
471. Zhigang Li, Jun Li, Xin Yan, Zhenping Feng (2012). Numerical investigations on the leakage flow characteristics of pocket damper labyrinth seals. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
472. Zhigang Li, Jun Li, Xin Yan, Zhenping Feng, Hiroharu OHYAMA, Ming Zhang (2012). Investigations on the Flow Pattern and Aerodynamic Performance of Last Stage and Exhaust Hood for Large Power Steam Turbines.DOI
473. Jun Li, Bo Qiu, Shengke Jiang, Xianglin Kong, Zhenping Feng (2012). Experimental and Numerical Investigations on the Leakage Flow Characteristics of the Labyrinth Brush Seal. Volume 4: Heat Transfer, Parts A and B.DOI
474. Jun Li, Jiandao Yang, Liqun Shi, Rui Yang, Zhenping Feng (2012). Analytical Investigations on the Contact Force Between Bristle Packs and Shaft Surface of Brush Seals. Volume 4: Heat Transfer, Parts A and B.DOI
475. Xin Yan, Yizhi Fan, Xianyou Shang, Kun He, Jun Li, Zhenping Feng (2012). Theoretical Investigations on Water Condensation in Main Steam Pipe. Volume 4: Heat Transfer, Parts A and B.DOI
476. Jun Li, Zhigang Li, Zhenping Feng (2012). Investigations on the Rotordynamic Coefficients of Pocket Damper Seals Using the Multi-Frequency, One-Dimensional, Whirling Orbit Model and RANS Solutions.DOI
477. Wenhao Huo, Jun Li, Xin Yan, Zhenping Feng (2012). Numerical Investigations on the Steam Cooling Performance of the First Two Middle Pressure Turbine Stages for Ultra-Supercritical Steam Turbines. Volume 4: Heat Transfer, Parts A and B.DOI
478. 晏鑫，李军，丰镇平（2011）. 蜂窝密封内流动传热及转子动力特性的研究进展. 《力学进展》.
479. 李少军，李军，龚存忠，丰镇平（2011）. 一级半透平级叶片型线的气动优化设计研究. 《汽轮机技术》.
480. 阳虹，杨建道，李军，晏鑫，何阿平，丰镇平（2011）. 汽轮机调节级气动性能分析和结构优化设计. 《热力透平》.
481. 李军，孙皓，李彬，晏鑫，宋立明，丰镇平，孙奇，钟刚云，江生科，吴其林，王为民（2011）. 透平机械高负荷叶片和大焓降级的研究进展. 《热力透平》.
482. 王顺森，毛靖儒，丰镇平，张俊杰，徐亚涛（2011）. 高参数汽轮机喷嘴防治颗粒冲蚀技术研究. 《热力透平》.
483. 赵晶金，刘钊，丰镇平，余小兵（2011）. 新型反对称涡气膜冷却结构设计及其数值研究. 《工程热物理学报》.
484. 霍文浩，祁明旭，李军，丰镇平（2011）. 超临界汽轮机中压透平级流动传热特性研究. 《西安交通大学学报》.
485. 陈春新，邱波，李军，丰镇平（2011）. 刷式密封迟滞特性的数值研究. 《西安交通大学学报》.
486. 付雷，丰镇平（2011）. 毫米级微型燃气轮机系统设计原则与可实现性循环分析. 《西安交通大学学报》.
487. 李志刚，郎骥，李军，丰镇平（2011）. 迷宫密封泄漏特性的试验研究. 《西安交通大学学报》.
488. 刘钊，丰镇平，宋立明（2011）. 实际叶片前缘冲击冷却流动和换热的数值研究. 《西安交通大学学报》.
489. 李少军，李军，龚存忠，丰镇平（2011）. 考虑叶顶泄漏的透平级非定常气动性能研究. 《动力工程学报》.
490. 谢永慧，马丹丹，张荻，丰镇平（2011）. 基于三维接触有限元方法的透平叶片枞树型叶根轮缘优化研究. 《中国动力工程学会透平专业委员会2011年学术研讨会论文集》.
491. 孙皓，李军，李国君，丰镇平（2011）. 非轴对称端壁造型技术在透平机械中的应用和发展. 《中国动力工程学会透平专业委员会2011年学术研讨会论文集》.
492. 李亮，王华，游玮，丰镇平（2011）. 核电汽轮机汽水分离再热器的发展现状. 《中国动力工程学会透平专业委员会2011年学术研讨会论文集》.
493. 谢永慧，邓实，张荻，丰镇平，漆小兵，赵世全，王为民（2011）. 基于热流固耦合分析的重型燃气轮机透平高压叶片寿命研究. 《热力透平》.
494. Feng Zhenping (2011). Design Principle and Cycle Analysis of Millimeter-Scale Micro-Turbine. Xi'an Jiaotong Daxue xuebao.
495. Feng Zhenping (2011). Aerodynamic Optimization Design of the Blade Profile in One and Half Turbine Stage. Turbine Technology.
496. Lei Fu, Yan Shi, Qinghua Deng, Huai Li, Zhenping Feng (2011). Integrated Optimization Design for a Radial Turbine Wheel of a 100 kW-Class Microturbine. Journal of Engineering for Gas Turbines and Power.DOI
497. Zhao Liu, Zhenping Feng (2011). Numerical simulation on the effect of jet nozzle position on impingement cooling of gas turbine blade leading edge. International Journal of Heat and Mass Transfer.DOI
498. Jun Li, Hao Sun, Jinshan Wang, Zhenping Feng (2011). Numerical investigations on the steady and unsteady leakage flow and heat transfer characteristics of rotor blade squealer tip. Journal of Thermal Science.DOI
499. Xin Yan, J Li, Zhenping Feng (2011). Effects of sealing clearance and stepped geometries on discharge and heat transfer characteristics of stepped labyrinth seals. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
500. Zhao Liu, Zhenping Feng, Liming Song (2011). Numerical Study on Flow and Heat Transfer Characteristics of Swirl Cooling on Leading Edge Model of Gas Turbine Blade.DOI
501. Chaolei Zhang, Zhenping Feng (2011). Aerodynamic Shape Design Optimization for Turbomachinery Cascade Based on Discrete Adjoint Method.DOI
502. Zhigang Li, Jun Li, Zhenping Feng, Jiandao Yang, Rui Yang, Liqun Shi (2011). Numerical Investigations on the Leakage Flow Characteristics of Pocket Damper Seals.DOI
503. Haitao Li, Liming Song, Pengfei Zhang, Zhenping Feng (2011). Inverse Problem for Isentropic Mach-Number on Blade Wall in Aerodynamic Shape Design of Turbomachinery Cascades by Using Adjoint Method.DOI
504. 谢永慧，邓实，张荻，丰镇平（2010）. 汽轮机转子焊接的三维有限元数值模型研究. 《热力透平》.
505. 李军，孙皓，罗常，宋立明，丰镇平，钟刚云，吴其林，王建录，王为民（2010）. 轴流透平机械通流部分泄漏流动及控制技术研究进展. 《热力透平》.
506. 石龑，李少军，李军，丰镇平（2010）. 动叶栅倒角对透平级气动性能的影响. 《航空动力学报》.
507. 李军，王金山，蒋勇，丰镇平（2010）. 凹槽状动叶顶部非定常气膜冷却性能的研究. 《西安交通大学学报》.
508. 谢永慧，邓实，张荻，丰镇平，漆小兵，赵世全，王为民（2010）. 重型燃气轮机透平高压叶片热流固耦合及概率寿命研究. 《中国动力工程学会透平专业委员会2010年学术研讨会》.
509. 孙皓，薛志恒，李军，丰镇平（2010）. 低雷诺数对透平叶片间隙泄漏流动影响的研究. 《西安交通大学学报》.
510. 秦重阳，李亮，柴秀妮，吴联为，丰镇平（2010）. 湿蒸汽透平级内汽液两相流动特性的研究. 《中国动力工程学会透平专业委员会2010年学术研讨会论文集》.
511. 阳虹，杨建道，李军，晏鑫，何阿平，丰镇平（2010）. 大功率汽轮机喷嘴配汽调节级全三维气动性能和结构优化设计的研究. 《中国动力工程学会透平专业委员会2010年学术研讨会论文集》.
512. 李军，孙皓，李彬，晏鑫，宋立明，丰镇平，孙奇，钟刚云，江生科，吴其林，王为民（2010）. 高负荷叶片和大焓降级在叶轮机械通流部分设计和优化中应用的研究进展. 《中国动力工程学会透平专业委员会2010年学术研讨会论文集》.
513. 王顺森，毛靖儒，丰镇平（2010）. 高参数汽轮机调节级喷嘴防治颗粒冲蚀技术及其优化机制. 《中国动力工程学会透平专业委员会2010年学术研讨会论文集》.
514. 李军，刘立军，李国君，丰镇平（2010）. 空化数对离心泵水力性能影响的数值研究. 《工程热物理学报》.
515. 陈春新，李军，丰镇平（2010）. 刷式密封刷丝束与转子接触力的数值研究. 《西安交通大学学报》.
516. 厉海涛，宋立明，丰镇平（2010）. 复杂约束环境下基于控制理论的透平叶栅气动优化. 《工程热物理学报》.
517. 李志刚，李军，丰镇平（2010）. 迷宫密封泄漏特性影响因素的研究. 《西安交通大学学报》.
518. Feng Zhenping (2010). Study on Numerical Model for Welding Process of Steam Turbine Rotor Based on Three-Dimensional Finite Element Method. Thermal Turbine.
519. Yan Shi, Jun Li, Zhenping Feng (2010). Influence of Rotor Blade Fillets on Aerodynamic Performance of Turbine Stage.DOI
520. Zhao Liu, Zhenping Feng, Liming Song (2010). Numerical Study of Flow and Heat Transfer of Impingement Cooling on Model of Turbine Blade Leading Edge. Volume 4: Heat Transfer, Parts A and B.DOI
521. Chaolei Zhang, Qinghua Deng, Zhenping Feng (2010). Study on Aerodynamic Redesign of a High Pressure Ratio Centrifugal Compressor.DOI
522. Liang Li, Yu Li, Lianwei Wu, Wei You, Jun Li, Zhenping Feng (2010). Numerical Study on Condensing Flow in Low Pressure Cylinder of a 300MW Steam Turbine.DOI
523. Jun Li, Yangzi Huang, Zhigang Li, Zhenping Feng, Hong Yang, Jiandao Yang, Liqun Shi (2010). Effects of Clearances on the Leakage Flow Characteristics of Two Kinds of Brush Seals and Referenced Labyrinth Seal. Volume 4: Heat Transfer, Parts A and B.DOI
524. Chang Jie Luo, Liming Song, Jun Li, Zhenping Feng, Shouhong Cao, Zhihua Wu, Qilin Wu (2010). Numerical Study of Internal Flow Fields in Steam Turbine Stages With Balance Holes.DOI
525. Xin Yan, Jun Li, Zhenping Feng (2010). Effects of Inlet Preswirl and Cell Diameter and Depth on Honeycomb Seal Characteristics. Journal of Engineering for Gas Turbines and Power.DOI
526. 邓清华，牛久芳，丰镇平（2009）. 向心涡轮叶轮顶部间隙泄漏流动特性研究. 《中国科学:技术科学》.
527. 李军，晏鑫，丰镇平，江生科，孔祥林，孙奇，王建录，王为民（2009）. 透平机械阻尼密封技术及其转子动力特性研究进展. 《热力透平》.
528. 晏鑫，李军，丰镇平（2009）. 预旋对蜂窝密封和迷宫密封内流动传热特性影响. 《航空动力学报》.
529. 付雷，邓清华，丰镇平（2009）. 微型向心透平级速比与DN值的最优选择. 《西安交通大学学报》.
530. 李军，孙皓，罗常，宋立明，丰镇平，钟刚云，吴其林，王建录，王为民（2009）. 轴流透平机械通流部分泄漏流动及其控制技术研究进展. 《2009年中国动力工程学会透平专业委员会研讨会》.
531. 杨佃亮，丰镇平，余小兵（2009）. 凹槽叶顶非定常间隙泄漏流动和传热的数值研究. 《工程热物理学报》.
532. 罗常，宋立明，李军，丰镇平（2009）. 叶轮机械叶栅多目标多学科设计优化算法. 《工程热物理学报》.
533. 厉海涛，宋立明，李颖晨，丰镇平（2009）. 基于控制理论和N-S方程的二维叶栅气动优化算法. 《工程热物理学报》.
534. 张朝磊，邓清华，丰镇平（2009）. 级环境下离心压气机扩压器叶片气动优化设计. 《西安交通大学学报》.
535. 石龑，李少军，邓清华，李军，丰镇平（2009）. 透平级轴向间隙对非定常流动干涉影响的研究. 《西安交通大学学报》.
536. 谢永慧，蓝吉兵，张荻，丰镇平，吴其林，钟刚云，王建录（2009）. 透平级三维粘性非定常流动和气流激振力的研究. 《动力工程学报》.
537. 王顺森，毛靖儒，刘观伟，丰镇平（2009）. 透平叶栅二次流瞬态特性试验及动力学分析. 《西安交通大学学报》.
538. 付雷，石，邓清华，丰镇平（2009）. 毫米级微型透平的气动优化设计研究. 《西安交通大学学报》.
539. 晏鑫，李军，丰镇平（2009）. Bulk Flow方法分析孔型密封转子动力特性的有效性. 《西安交通大学学报》.
540. 罗常，宋立明，李军，丰镇平，曹守洪，巫志华，牛久芳，吴其林（2009）. 透平级通流部分的气动优化设计研究. 《2009年中国动力工程学会透平专业委员会研讨会》.
541. 李亮，徐小波，李瑜，柴秀妮，秦重阳，丰镇平，钟刚云，巫志华，吴其林，王建录，王为民（2009）. 汽轮机内非平衡凝结理论的工业应用研究. 《2009年中国动力工程学会透平专业委员会研讨会》.
542. 吴晓明，李国君，李亮，丰镇平（2009）. 湿蒸汽凝结流中自激振荡模式的数值模拟. 《动力工程学报》.
543. 赵晓燕，李祥晟，丰镇平（2009）. 燃气轮机低热值合成气燃烧室内三维湍流流动的数值模拟研究. 《动力工程学报》.
544. 晏鑫，李军，丰镇平（2009）. 孔型气体密封转子的动力特性研究. 《动力工程学报》.
545. 晏鑫，蒋玉娥，李军，丰镇平（2009）. 迷宫密封转子动力学特性的数值模拟. 《热能动力工程》.
546. 石䶮，邓清华，李军，丰镇平（2009）. 一级半轴流式透平的非定常流动干涉与时序效应. 《动力工程学报》.
547. Feng Zhenping (2009). Analysis and Optimal Selection of Stage Velocity Ratio and DN-Value for Micro Radial Turbine. Xi'an Jiaotong Daxue xuebao.
548. Feng Zhenping (2009). Influence of Axial Clearance on Unsteady Flow Interaction in Turbine Stage. Xi'an Jiaotong Daxue xuebao.
549. Feng Zhenping (2009). Interaction and Clocking Effect of Unsteady Flow in a One and a Half Axial-flow Turbine Stage. Journal of Power Engineering.
550. Feng Zhenping (2009). Numerical Simulation of Self-excited Oscillation Patterns in Wet Steam Flow with Condensation. Journal of Power Engineering.
551. Feng Zhenping (2009). Influence of inlet preswirl on discharge and heat transfer characteristics of honeycomb and smooth labyrinth seals. Journal of Aerospace Power.
552. Feng Zhenping (2009). Aerodynamic Design and Optimization of a Radial Inflow Millimeter-Scale Turbine. Xi'an Jiaotong Daxue xuebao.
553. Lei Fu, Yan Hui Shi, Qinghua Deng, Zhenping Feng (2009). Aerodynamic Design and Numerical Investigation on Overall Performance of a Microradial Turbine With Millimeter-Scale. Journal of Engineering for Gas Turbines and Power.DOI
554. Liming Song, Chang Luo, Jun Li, Zhenping Feng (2009). Aerodynamic optimization of axial turbomachinery blades using parallel adaptive range differential evolution and Reynolds-averaged Navier-Stokes solutions. International Journal for Numerical Methods in Biomedical Engineering.DOI
555. Xin Yan, Jun Li, Liming Song, Zhenping Feng (2009). Investigations on the Discharge and Total Temperature Increase Characteristics of the Labyrinth Seals With Honeycomb and Smooth Lands. Journal of Turbomachinery.DOI
556. Chang Jie Luo, Liming Song, Jun Li, Zhenping Feng (2009). Multiobjective Optimization Approach to Multidisciplinary Design of a Three-Dimensional Transonic Compressor Blade.DOI
557. Hao Sun, Jun Li, Zhenping Feng (2009). Effects of Tip Clearance on Unsteady Flow Characteristics in an Axial Turbine Stage.DOI
558. Dianliang Yang, Zhenping Feng, Xiaobing Yu (2009). Investigation of Film Cooling Effectiveness on Squealer Tip of a Gas Turbine Blade.DOI
559. Haitao Li, Liming Song, Yingchen Li, Zhenping Feng (2009). 2D Viscous Aerodynamic Shape Design Optimization for Turbine Blades Based on Adjoint Method.DOI
560. 李军，晏鑫，宋立明，邓清华，丰镇平，江生科，孔祥林，孙奇，王建录，王为民（2008）. 透平机械密封技术研究进展. 《热力透平》.
561. 宋立明，罗常，李军，丰镇平（2008）. 基于全局气动优化方法的跨声速叶栅气动优化. 《航空动力学报》.
562. 李亮，李瑜，吴晓明，陈红梅，李国君，丰镇平，江生科，孔祥林，孙奇，钟刚云，巫志华，吴其林，王建录，王为民（2008）. 汽轮机中湿蒸汽两相凝结流动研究. 《热力透平》.
563. 黄斌，刘练波，许世森，丰镇平（2008）. 燃煤电站CO2捕集与处理技术的现状与发展. 《电力设备》.
564. 杨佃亮，丰镇平（2008）. 叶顶形状对动叶顶部流动和传热的影响研究. 《西安交通大学学报》.
565. 杨佃亮，丰镇平（2008）. 非定常叶顶间隙泄漏流动和换热的数值研究. 《工程热物理学报》.
566. 李海朋，刘钊，丰镇平（2008）. 两种波纹板通道内的流动及换热比较. 《工程热物理学报》.
567. 晏鑫，李军，丰镇平（2008）. 高速旋转光滑面迷宫密封内流动和传热特性的研究. 《动力工程学报》.
568. 罗常，宋立明，李军，丰镇平（2008）. 三维跨音速叶栅自动气动优化设计. 《工程热物理学报》.
569. 李军，刘立军，李国君，丰镇平（2008）. 基于汽相/液相界面跟踪方法的弯管内空化流动的数值预测. 《工程热物理学报》.
570. 杨佃亮，丰镇平（2008）. 叶顶凹槽对燃气透平动叶气动性能及叶顶传热的影响. 《西安交通大学学报》.
571. 晏鑫，李军，宋立明，丰镇平（2008）. 蜂窝面迷宫密封内流动和总温升特性的研究. 《西安交通大学学报》.
572. 王顺森，毛靖儒，刘观伟，丰镇平（2008）. 透平叶栅二次流瞬态特性的新测试方法. 《西安交通大学学报》.
573. 谢永慧，蓝吉兵，张荻，丰镇平，吴其林，钟刚云，王建录（2008）. 汽轮机级三维粘性非定常流动及气流激振力研究进展. 《中国动力工程学会透平专业委员会2008年学术研讨会》.
574. 高锐，袁奇，高进，丰镇平（2008）. 燃气轮机拉杆转子有限元模型研究及临界转速计算. 《中国动力工程学会透平专业委员会2008年学术研讨会》.
575. 邓清华，倪平，丰镇平（2008）. 微型燃气轮机向心透平的性能试验. 《动力工程学报》.
576. 晏鑫，李军，丰镇平（2008）. 预旋对迷宫密封内流动传热特性影响的研究. 《热能动力工程》.
577. 李颖晨，丰镇平（2008）. 应用控制理论的叶栅气动反设计. 《工程热物理学报》.
578. Guanwei Liu, Shunsen Wang, Hui Guo, Jing-ru Mao, Zhenping Feng, Xiaowei Xiang (2008). Investigation on Flow Characteristics and Stability of Control Valves for Steam Turbines.DOI
579. Di Zhang, Yonghui Xie, Zhenping Feng (2008). An Investigation on Dynamic Characteristics of a High Speed Rotor With Complex Structure for Microturbine Test Rig.DOI
580. Dianliang Yang, Xiaobing Yu, Zhenping Feng (2008). Investigation of Leakage Flow and Heat Transfer in a Gas Turbine Blade Tip With Emphasis on the Effect of Rotation. Volume 4: Heat Transfer, Parts A and B.DOI
581. Xin Yan, Jun Li, Liming Song, Zhenping Feng (2008). Investigations on the Discharge and Total Temperature Increase Characteristics of the Labyrinth Seals With Honeycomb and Smooth Lands. Volume 4: Heat Transfer, Parts A and B.DOI
582. Yingchen Li, Zhenping Feng (2008). Three-Dimensional Aerodynamic Design of Turbine Blades Using the Adjoint Method.DOI
583. Xiaoming Wu, Liangxing Li, Guojun Li, Feng Zhenping (2008). Numerical investigation of the effect of inlet condition on self‐excited oscillation of wet steam flow in a supersonic turbine cascade. International Journal for Numerical Methods in Fluids.DOI
584. Qi Yuan, Rui Gao, Zhenping Feng, Jianlu Wang (2008). Analysis of Dynamic Characteristics of Gas Turbine Rotor Considering Contact Effects and Pre-Tightening Force.DOI
585. 宋立明，李军，丰镇平，罗常（2007）. 基于多目标优化的透平叶栅变工况设计方法. 《航空动力学报》.
586. 谢永慧，韩永强，刘象拯，丰镇平（2007）. 透平机械叶轮叶片三维参数化造型及六面体网格生成方法研究. 《机械强度》.
587. 巫志华，李亮，丰镇平 (2007). Study of steady and unsteady wet steam condensing flows in a turbine stage. Journal of Pharmaceutical Analysis.
588. 李军，晏鑫，丰镇平，江生科，孔祥林，孙奇，王建录（2007）. 基于多孔介质模型的刷式密封泄漏流动特性研究. 《西安交通大学学报》.
589. 李军，晏鑫，丰镇平（2007）. 刷式密封泄漏流动特性影响因素的研究. 《热能动力工程》.
590. 杨佃亮，丰镇平（2007）. 凹槽对动叶顶部流动和换热的影响. 《工程热物理学报》.
591. 李亮，丰镇平，李国君（2007）. 透平级内动静干涉对凝结特性影响的数值研究. 《工程热物理学报》.
592. 吴晓明，李亮，李国君，丰镇平（2007）. 基于双流体模型的湿蒸气凝结流动三维数值模拟. 《热能动力工程》.
593. 李祥晟，丰镇平（2007）. 燃气轮机燃烧室振荡被动控制方法的数值研究. 《动力工程学报》.
594. 李军，吕强，丰镇平，钟钢云，吴其林（2007）. 汽轮机动叶顶部间隙泄漏流动特性的数值模拟. 《动力工程学报》.
595. 李军，孙奇，晏鑫，孔祥林，江生科，王建录，丰镇平（2007）. 前加载和后加载叶片气动性能的数值研究. 《动力工程学报》.
596. 吕强，李军，李国君，丰镇平（2007）. 动叶围带顶部泄漏流动对透平级气动性能影响的数值研究. 《工程热物理学报》.
597. 王顺森，刘观伟，毛靖儒，丰镇平（2007）. 微粒撞击高参数汽轮机调节级喷嘴壁面特性研究. 《工程热物理学报》.
598. 王顺森，毛靖儒，刘观伟，丰镇平（2007）. 透平叶栅内涡系非定常演化及损失探讨. 《中国动力工程学会透平专业委员会2007年学术研讨会》.
599. 王顺森，刘观伟，毛靖儒，郭辉，马迅，丰镇平（2007）. 汽轮机喷嘴固粒冲蚀模化试验系统及测试方法. 《中国电机工程学报》.
600. 谢永慧，张荻，丰镇平（2007）. 汽轮机特大型末级长叶片强度振动研究进展. 《中国动力工程学会透平专业委员会2007年学术研讨会论文集》.
601. 李祥晟，丰镇平（2007）. 燃气轮机燃烧室自激励振荡燃烧的模拟和控制. 《中国动力工程学会透平专业委员会2007年学术研讨会论文集》.
602. 丰镇平，宋立明，罗常，李军（2007）. 叶轮机械三维叶栅气动优化设计系统. 《中国动力工程学会透平专业委员会2007年学术研讨会论文集》.
603. 丰镇平，李颖晨（2007）. 叶轮机械叶栅气动反问题研究及其新进展. 《中国动力工程学会透平专业委员会2007年学术研讨会论文集》.
604. 丰镇平，杨佃亮，余小兵（2007）. 燃气轮机叶栅通道中的传热和冷却研究. 《中国动力工程学会透平专业委员会2007年学术研讨会论文集》.
605. 孙奇，李军，孔祥林，江生科，王建录，丰镇平（2007）. 后加载和高负荷前加载叶型气动性能的试验研究. 《西安交通大学学报》.
606. 吴晓明，李国君，丰镇平，李亮（2007）. SST k-ω-kp两相湍流模型及其在湿蒸汽凝结流动数值模拟中的应用. 《西安交通大学学报》.
607. 李军，刘立军，李国君，丰镇平（2007）. 离心泵叶轮内空化流动的数值预测. 《工程热物理学报》.
608. 巫志华，李亮，丰镇平（2007）. 低压汽轮机三维叶栅通道内湿蒸汽两相流动的数值模拟与分析. 《工程热物理学报》.
609. 李颖晨，丰镇平（2007）. 透平叶栅三维粘性气动反问题的控制理论方法. 《工程热物理学报》.
610. 刘观伟，王顺森，毛靖儒，丰镇平（2007）. 汽轮机叶片材料抗固粒冲蚀磨损能力的试验研究. 《工程热物理学报》.
611. 李祥晟，丰镇平（2007）. 燃料空气供给条件对热声不稳定燃烧影响的研究. 《工程热物理学报》.
612. 宋立明，李军，丰镇平，罗常（2007）. 三维跨音速压气机叶栅多目标气动优化设计. 《工程热物理学报》.
613. 李颖晨，杨佃亮，高志明，丰镇平（2007）. 透平叶栅三维形状反问题研究. 《工程热物理学报》.
614. Jun Yin, G Li, Zhenping Feng (2007). Effects of shape factors on flow and heat transfer in corrugated-undulated channels with sinusoidal waves. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
615. Dianliang Yang, Zhenping Feng (2007). Tip Leakage Flow and Heat Transfer Predictions for Turbine Blades.DOI
616. Qinghua Deng, Jiufang Niu, Zhenping Feng (2007). Tip Leakage Flow in Radial Inflow Rotor of a Microturbine With Varying Blade-Shroud Clearance.DOI
617. Qinghua Deng, Jiufang Niu, Jing-ru Mao, Zhenping Feng (2007). Experimental and Numerical Investigation on Overall Performance of a Radial Inflow Turbine for 100kW Mircoturbine.DOI
618. Yingchen Li, Zhenping Feng (2007). Aerodynamic Design of Turbine Blades by Using Adjoint-Based Method and N-S Equation.DOI
619. Shunsen Wang, Guanwei Liu, Jing-ru Mao, Zhenping Feng (2007). Experimental Investigation on the Solid Particle Erosion in the Control Stage Nozzles of Steam Turbine.DOI
620. Jun Li, Xin Yan, Guojun Li, Zhenping Feng (2007). Effects of Pressure Ratio and Sealing Clearance on Leakage Flow Characteristics in the Rotating Honeycomb Labyrinth Seal.DOI
621. Feng Zhenping (2007). A Study of the Influence of Brush-type Seals on Leaking Steam Flow Characteristics. Journal of Engineering for Thermal Energy and Power.
622. Feng Zhenping (2007). Numerical Study on Methods of Passive Control of Thermoacoustic Oscillations in Gas-Turbine Combustors. Journal of Power Engineering.
623. 李祥晟，丰镇平（2006）. 燃烧室内自激励振荡燃烧的数值研究. 《燃烧科学与技术》.
624. 杨佃亮，李颖晨，丰镇平（2006）. 超音速喷嘴叶栅造型设计及数值分析. 《工程热物理学报》.
625. 巫志华，李亮，丰镇平（2006）. 三维湿蒸汽自发凝结流动的数值模拟. 《动力工程学报》.
626. 肖俊峰，朱宝田，丰镇平，张永海（2006）. 具有温度场的冷却叶片振动特性计算方法研究. 《燃气轮机技术》.
627. 邓清华，毛靖儒，倪平，丰镇平（2006）. 微型燃气轮机向心透平性能试验装置与测量系统. 《动力工程学报》.
628. 李军，刘立军，丰镇平（2006）. 数值模拟两相汽蚀流动的新模型和算法. 《计算物理》.
629. 杨佃亮，李颖晨，丰镇平（2006）. 三角B-B曲面在非结构网格生成中的应用. 《工程热物理学报》.
630. 梁红侠，王秋旺，王军伟，黄自鹏，罗来勤，丰镇平（2006）. 微型燃气轮机CW原表面回热器流动与换热的试验研究. 《工程热物理学报》.
631. 李军，刘立军，丰镇平（2006）. 附着空化流动下离心泵水力性能数值预测. 《西安交通大学学报》.
632. 张兄文，李军，李国君，丰镇平（2006）. 管式SOFC热电特性的三维数值研究. 《热能动力工程》.
633. 李军，晏鑫，陈中凯，丰镇平（2006）. 高速旋转的汽轮机隔板密封内流体流动的模拟. 《动力工程学报》.
634. 张宏伟，陶文铨，何雅玲，丰镇平（2006）. 再生冷却推力室耦合传热数值模拟. 《航空动力学报》.
635. 李军，刘立军，丰镇平（2006）. 基于界面跟踪方法的汽蚀模型和算法的有效性验证. 《工程热物理学报》.
636. 邓清华，牛久芳，丰镇平（2006）. 叶轮顶部间隙对向心透平总体性能影响的研究. 《工程热物理学报》.
637. 张宏伟，陶文铨，何雅玲，丰镇平（2006）. 液体火箭发动机燃烧室液膜冷却数值研究. 《西安交通大学学报》.
638. 李祥晟，丰镇平（2006）. 贫油预混燃烧室燃烧稳定性的数值研究. 《西安交通大学学报》.
639. 巫志华，郭歌，李亮，丰镇平（2006）. 一种用于真实气体流动的数值计算方法. 《西安交通大学学报》.
640. 李亮，程代京，丰镇平，李国君（2006）. 汽轮机湿蒸汽级中凝结流动的三维数值分析. 《工程热物理学报》.
641. 李军，刘立军，丰镇平（2006）. 附着空化流动的模型和算法. 《西安交通大学学报》.
642. Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng (2006). Cycle analysis of an integrated solid oxide fuel cell and recuperative gas turbine with an air reheating system. Journal of Power Sources.DOI
643. Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng (2006). Dynamic modeling of a hybrid system of the solid oxide fuel cell and recuperative gas turbine. Journal of Power Sources.DOI
644. Xiongwen Zhang, Guojun Li, Jun Li, Zhenping Feng (2006). Numerical study on electric characteristics of solid oxide fuel cells. Energy Conversion and Management.DOI
645. Jun Li, Lijun Liu, Zhenping Feng (2006). Numerical prediction of the hydrodynamic performance of a centrifugal pump in cavitating flows. Communications in Numerical Methods in Engineering.DOI
646. Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng (2006). Development of a control-oriented model for the solid oxide fuel cell. Journal of Power Sources.DOI
647. Jixiang Yin, Guojun Li, Zhenping Feng (2006). Effects of Intersection Angles on Flow and Heat Transfer in Corrugated-Undulated Channels With Sinusoidal Waves. ASME Journal of Heat and Mass Transfer.DOI
648. Yingchen Li, Dianliang Yang, Zhenping Feng (2006). Inverse Problem in Aerodynamic Shape Design of Turbomachinery Blades.DOI
649. Qiuwang Wang, Liang Hong-xia, Xie Gong-nan, Zeng Min, Luo Laiqin, Feng Zhenping (2006). Genetic Algorithm Optimization for Primary Surfaces Recuperator of Microturbine. Journal of Engineering for Gas Turbines and Power.DOI
650. Jun Li, Xin Yan, Zhenping Feng (2006). Effects of Pressure Ratio and Fin Pitch on Leakage Flow Characteristics in High Rotating Labyrinth Seals.DOI
651. Liang Li, Zhenping Feng, Guojun Li (2006). Study on Effects of Spontaneous Condensation on Performance of Low Pressure Stages in a Steam Turbine.DOI
652. D. J. Zhang, Qiuwang Wang, Min Zeng, L. Q. Luo, Fan Wu, Zhenping Feng (2006). CFD Optimization of Gas Inlet Configuration for 100kW Microturbine Recuperator. Volume 5: Marine; Microturbines and Small Turbomachinery; Oil and Gas Applications; Structures and Dynamics, Parts A and B.DOI
653. Jintao Huang, Yue Chen, Zhenping Feng (2006). Multi-Objective Optimization and Performance Analysis of BCHP Systems Using Genetic Algorithms. Volume 4: Cycle Innovations; Electric Power; Industrial and Cogeneration; Manufacturing Materials and Metallurgy.DOI
654. Liangxing Li, Sun Xiuling, Guojun Li, Feng Zhenping (2006). Numerical investigation on the self-excited oscillation of wet steam flow in a supersonic turbine cascade. Progress in Natural Science Materials International.DOI
655. Feng Zhenping (2006). Numerical study on coupled heat transfer of thrust chamber with regenerative cooling. Journal of Aerospace Power.
656. Feng Zhenping (2006). RESEARCH ON THE LEAKAGE FLOW CHARACTERISTICS IN THE STEPPED LABYRINTH SEAL. Chinese Journal of Mechanical Engineering.
657. Feng Zhenping (2006). Numerical Simulation of 3D Wet Steam Flow with Spontaneous Condensation. Journal of Power Engineering.
658. Feng Zhenping (2006). Simulation of Flow Within Stepped Labyrinth Seals of Diaphragm in Steam Turbine Under High Rotating Speed Conditions. Journal of Power Engineering.
659. 黄锦涛，丰镇平，袁劲松（2005）. 分布式冷热电联供系统经济性分析. 《沈阳工程学院学报(自然科学版)》.
660. 陈红梅，李亮，丰镇平，李国君（2005）. 透平级中自发凝结及叶栅中非均质凝结流动的初步研究. 《工程热物理学报》.
661. 张兄文，李国君，李军，丰镇平（2005）. 高温燃料电池/燃气轮机混合循环发电技术. 《燃气轮机技术》.
662. 岳晨，黄锦涛，丰镇平（2005）. 基于负荷曲线的楼宇冷热电联供系统性能研究. 《中国动力工程学会第三届青年学术年会论文集》.
663. 李国君，阴继翔，丰镇平（2005）. CC型通道波纹相对节距对流动与换热特性的影响. 《动力工程学报》.
664. 李军，李国君，丰镇平（2005）. 汽轮机光轴迷宫式隔板汽封内部流场的数值模拟. 《动力工程学报》.
665. 宋立明，李军，丰镇平（2005）. ARDE算法及其在三维叶栅气动优化设计中的应用. 《工程热物理学报》.
666. 巫志华，李亮，丰镇平（2005）. 湿蒸汽两相流动问题的耦合求解. 《工程热物理学报》.
667. 宋立明，李军，丰镇平（2005）. 跨音速透平扭叶片的气动优化设计研究. 《西安交通大学学报》.
668. 阴继翔，李国君，丰镇平（2005）. 交错波纹板原表面换热器通道内对流换热的数值研究. 《西安交通大学学报》.
669. 祁明旭，丰镇平（2005）. 透平动叶顶部间隙流的表现形式及其对透平性能的影响. 《西安交通大学学报》.
670. 祁明旭，丰镇平（2005）. 透平动叶顶部间隙流的端壁二次流结构研究. 《西安交通大学学报》.
671. 邓清华，牛久芳，丰镇平（2005）. 微型燃机向心透平叶轮顶部间隙流动的数值模拟. 《西安交通大学学报》.
672. 阴继翔，李国君，丰镇平（2005）. 两种波纹通道内周期性充分发展对流换热的数值研究. 《热能动力工程》.
673. 邓清华，丰镇平（2005）. 微型燃气轮机向心透平导向器的流场分析与设计研究. 《西安交通大学学报》.
674. Qiuwang Wang, Hao Liang, L. Q. Luo, J. W. Wang, Zhu Ping Huang, Zhenping Feng, Z.Q. Chen (2005). Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator With Cross-Wavy Primary Surface Channels.DOI
675. Liming Song, Zhenping Feng, Jun Li (2005). Shape Optimization of Turbine Stage Using Adaptive Range Differential Evolution and Three-Dimensional Navier-Stokes Solver.DOI
676. Hao Liang, Qiuwang Wang, L. Q. Luo, Zhenping Feng (2005). Numerical Simulation of Gas Flow and Heat Transfer in Cross-Wavy Primary Surface Channel for Microtubine Recuperators.DOI
677. Jun Li, Guojun Li, Zhenping Feng, Lijun Liu (2005). Multiobjective Optimization Approach to Turbomachinery Blades Design.DOI
678. Yonghui Xie, Qinghua Deng, Di Zhang, Zhenping Feng (2005). Strength Design and Numerical Analysis of Radial Inflow Turbine Impeller for a 100kW Microturbine.DOI
679. Jintao Huang, Zhenping Feng, Yue Chen, Li Liu (2005). Operation Modes and Economic Performance Study of 100kW Microturbine Building Cooling, Heating and Power Systems.DOI
680. Jixiang Yin, Guojun Li, Zhenping Feng (2005). Effects of Corrugation Angle on Flow and Heat Transfer in Cross Corrugation Channels With Sinusoidal Waves.DOI
681. Jun Li, Qinghua Deng, Zhenping Feng (2005). Numerical Investigations of the Flow Characteristics in the Straight-Through Honeycomb Seal.DOI
682. Liangxing Li, Sun Xiuling, Feng Zhenping, Guojun Li (2005). Transonic flow of moist air around and NACA 0012 airfoil with non-equilibrium condensation. Progress in Natural Science Materials International.DOI
683. Feng Zhenping (2005). COMPARISON OF THE FLOW CHARACTERISTICS FOR THE HONEYCOMB AND LABYRINTH SEAL USING NUMERICAL SIMULATION. Proceedings of the CSEE.
684. Feng Zhenping (2005). Aerodynamic Optimization Design of Cascade Airfoil Using Hybrid Evolutionary Algorithms. Mechanical Science and Technology.
685. 梁红侠，王秋旺，彭波涛，罗来勤，丰镇平（2004）. 微型燃气轮机回热器换热表面的对比研究. 《工程热物理学报》.
686. 刘莉，黄锦涛，丰镇平（2004）. 100 kW微型燃机冷热电联产的经济性分析. 《工程热物理学报》.
687. 阴继翔，李国君，丰镇平（2004）. 不同相位差正弦型波纹通道内流动与换热特性的数值研究. 《西安交通大学学报》.
688. 张文普，丰镇平（2004）. 燃气轮机环形燃烧室内燃烧流动的数值模拟. 《动力工程学报》.
689. 黄锦涛，丰镇平，刘莉（2004）. 微型燃气轮机冷热电联产系统运行模式研究. 《热力发电》.
690. 李军，任斌，丰镇平（2004）. 基于复合进化算法和Navier-Stokes方程求解技术的透平叶栅气动优化设计. 《热能动力工程》.
691. 宋立明，丰镇平，李军，刘莉（2004）. 基于椭圆型方程的扭叶片造型方法的研究. 《工程热物理学报》.
692. 陈红梅，李亮，丰镇平，李国君（2004）. 一维喷管中湿蒸汽非均质凝结流动的研究. 《工程热物理学报》.
693. Feng Zhenping (2004). HYDRODYNAMIC OPTIMIZATION DESIGN OF LOW SOLIDITY VANED DIFFUSER FOR A CENTRIFUGAL PUMP USING GENETIC ALGORITHMS.
694. Feng Zhenping (2004). MULTIOBJECTIVE OPTIMIZATION DESIGN OFA COMPRESSOR AIRFOIL USING EVOLUTIONARYALGORITHMS. Proceedings of the CSEE.
695. 李亮，丰镇平，李国君（2003）. 出气边形状对叶栅中凝结流动影响机理的数值研究. 《工程热物理学报》.
696. 张文普，丰镇平（2003）. 微型燃气轮机燃烧室性能的数值研究. 《燃气轮机技术》.
697. 张文普，丰镇平（2003）. 级间分离的流场及热流分析研究. 《推进技术》.
698. 祁明旭，丰镇平，KANGShun，HIRSCHCharles（2003）. 动静干涉效应对轴流透平级气动性能的影响. 《工程热物理学报》.
699. 王玉璋，赵亚芳，丰镇平，王永泓（2003）. 后加载技术在极小展弦比叶栅中的应用. 《热能动力工程》.
700. 张文普，丰镇平（2002）. 燃气轮机技术的发展与应用. 《燃气轮机技术》.
701. 李亮，丰镇平，李国君（2002）. 平面叶栅中的湿蒸汽两相凝结流动数值模拟. 《工程热物理学报》.
702. 丰镇平，刘晓勇，张永海，刘莉（2002）. 微型燃气轮机热力系统的设计分析. 《工程热物理学报》.
703. 李亮，李国君，丰镇平（2001）. 湿蒸汽两相流动的数值方法及其在喷管中的应用. 《西安交通大学学报》.
704. 祁明旭，丰镇平，刘晓勇（2001）. 复杂通道内非结构网格的生成方法. 《西安交通大学学报》.
705. 李亮，丰镇平，李国君（2001）. 一维喷管中存在自发凝结的跨音速湿蒸汽两相流动数值模拟. 《工程热物理学报》.
706. 童彤，丰镇平，罗国熙，郑心伟（2001）. 基于面向对象的透平级设计优化专家系统的研究. 《热能动力工程》.
707. 童彤，丰镇平，闻雪友（2001）. 两种算法在透平级的多目标优化设计中的应用. 《热能动力工程》.
708. 祁明旭，丰镇平（2001）. 非结构网格的生成及新型数据类型的应用. 《工程热物理学报》.
709. 丰镇平（2000）. 先进微型燃气轮机技术进展及其在我国的研发应用前景. 《中国科协2000年学术年会》.
710. 祁明旭，刘斌，丰镇平（2000）. 一种新的无矩阵运算的高效差分格式. 《工程热物理学报》.
711. 童彤，丰镇平（2000）. 基于遗传算法的透平级多目标优化设计. 《工程热物理学报》.
712. Guojun Li, Zhenping Feng, Mou-Jin Zhang, Liang Li (2000). A k- ɛ turbulence model considering compressibility in three-dimensional transonic turbulent flow calculation. Journal of Thermal Science.DOI
713. Feng Zhenping (2000). A NEW KIND OF HIGH EFFICIENT NON-MATRIX CALCULATION DIFFERENTIAL SCHEME. Journal of Engineering Thermophysics.
714. 童彤，丰镇平，孟庆集（1999）. 模拟退火算法在透平叶栅多目标优化设计中的应用. 《西安交通大学学报》.
715. 李国君，丰镇平，徐克鹏，沈祖达（1999）. 可压缩κ-ω方程紊流模型及其应用. 《工程热物理学报》.
716. 常建忠，丰镇平，李国君，沈祖达（1998）. 不同负冲角工况下透平叶栅二次流的数值模拟及分析. 《工程热物理学报》.
717. 李国君，丰镇平，沈祖达（1998）. 喷管不足膨胀冲击喷流的数值研究. 《西安交通大学学报》.
718. 常建忠，丰镇平，沈祖达（1998）. 大负冲角下叶栅二次流特性的可视化实验研究. 《西安交通大学学报》.
719. 黄伟东，孙弼，丰镇平（1998）. 汽轮机排汽缸扩压管几何形状对气动性能影响的分析. 《动力工程学报》.
720. 李军，丰镇平，沈祖达（1998）. 透平跨音速叶栅正反混合问题优化设计的研究. 《动力工程学报》.
721. 叶芳，丰镇平（1998）. 径流式透平叶轮的—元无量纲设计和优化. 《燃气轮机技术》.
722. 丰镇平，沈祖达（1997）. 径流式涡轮前、后弯叶轮特性的数值分析和试验研究. 《内燃机工程》.
723. 常建忠，李军，沈祖达，丰镇平（1997）. 叶轮机械中减小二次流损失有效技术研究. 《汽轮机技术》.
724. 常建忠，丰镇平，沈祖达，李军，向志军，程武敏（1997）. 适合于叶轮机械叶栅流场显示的两种可视化技术研究. 《汽轮机技术》.
725. 丰镇平，沈祖达（1997）. 一种适用于车用增压器涡轮的前弯后掠式叶轮. 《内燃机学报》.
726. 李军，丰镇平，常建忠，沈祖达（1997）. 透平叶栅C型网格生成技术的研究. 《西安交通大学学报》.
727. 丰镇平，李军，沈祖达（1997）. 遗传算法及其在透平机械优化设计中的应用. 《燃气轮机技术》.
728. Jun Li, Zhenping Feng, Jianzhong Chang, Zuda Shen (1997). Aerodynamic optimum design of transonic turbine cascades using Genetic Algorithms. Journal of Thermal Science.DOI
729. Liejin Guo, Zhenping Feng, X.J. Chen, Nancy H. Thomas (1996). Experimental investigation of forced convective boiling flow instabilities in horizontal helically coiled tubes. Journal of Thermal Science.DOI
730. 丰镇平，沈祖达，赵剑兵（1992）. 高原车用增压器离心式压气机特性的修正转换及其探讨. 《内燃机学报》.
731. 沈祖达，丰镇平，李文学，徐进峰（1991）. 小功率向心透平叶轮内部流动及其分离特性的研究. 《西安交通大学学报》.
732. 沈祖达，丰镇平，徐进峰（1990）. 车用增压器变截面无叶蜗壳和涡轮气动性能的研究. 《内燃机学报》.
733. 丰镇平，徐进峰，沈祖达（1990）. 向心透平叶轮进口型线的改型分析. 《工程热物理学报》.
734. 沈祖达，丰镇平，侯小军（1986）. 可变截面涡轮增压器特性及其匹配的试验研究. 《内燃机工程》.
735. Feng Zhenping, Zuda Shen, Xiang Yimin (1985). Experimental Investigation on Aerodynamic Characteristics of a Variable Area Nozzleless Volute.DOI

书籍章节

1. Xiaoming Wu, Liang Li, Guojun Li, Zhenping Feng (2007). Numerical Simulation of Wet Steam Condensing Flow Based on a Two-fluid model. Springer eBooks.DOI
2. Jun Li, Xin Yan, Qiang Lv, Yonghui Xie, Zhenping Feng (2007). The Effect of the Shrouded Rotor Blade Tip Leakage Flow on the Aerodynamic Performance of a One and Half Turbine Stage. Springer eBooks.DOI
3. Xin Yan, Jun Li, Yonghui Xie, Zhenping Feng, Gangyun Zhong, Qilin Wu, Jianlu Wang (2007). Computational Fluid Dynamics Analysis Approach to the Aerodynamic Performance of a Nozzle Controlling Stage for a 600MW Steam Turbine. Springer eBooks.DOI