姜凤阳｜西安工程大学｜学者主页

2026

500 ℃退火保温时间对工业纯钽表面氧化层生长及综合性能的影响

楚仁宇，姜凤阳，思芳，王俊勃，刘江南，卢俊煌，马亚明，王梓安

《稀有金属与硬质合金》

DOI

2026

Effect of Ti3AlC2 Particle Size on the Properties of Ag/Ti3AlC2 Electrical Contact Materials

Suxing Chen, Songtao Liu, Jiangnan Liu, Fengyang Jiang, Fang Si, Yaming Ma, Zian Wang, Xiaoqi Ma, Junbo Wang

Journal of Materials Engineering and Performance

DOI

2026

Effect of holding time on the microstructure and properties of FeCrMnNiCu0.2Si0.4 high-entropy alloy

Weiwang Sun, Chunfang Ma, Fengyang Jiang, Fang Si, Junbo Wang, Gengen Ye, Zian Wang, Yamin Ma

Materials Chemistry and Physics

DOI

2026

The influence of morphology of ZnO on the properties of Ag/ZnO electrical contact material

Songtao Liu, Enkang Zhang, Fang Si, Fengyang Jiang, Haojie Zhang, Zinan Zhang, Haiyun Hou, Junbo Wang

Micro and Nanostructures

DOI

2026

Microstructure regulation and magnetic property enhancement of NdFeB/SmPrCo composite magnets via Nano-cu grain-boundary doping

Fang Si, Caiyin You, Hangjian Wang, Fengyang Jiang, Junbo Wang

Journal of Magnetism and Magnetic Materials

DOI

2025

服役条件对高熵合金摩擦磨损性能影响的研究进展

艾根根，姜凤阳，思芳，刘江南，卫娜，王俊勃

《金属功能材料》

DOI

2025

不同固溶时间下Ti2AlNb基合金组织转变机制及力学性能

卢俊煌，姜凤阳，思芳，杜予晅，王俊勃，刘江南，陈金坤

《稀有金属与硬质合金》

DOI

2025

铜添加量对GCr15钢组织和耐腐蚀性能的影响

楚玉敏，姜凤阳，思芳，董利军，史迎建，刘江南，王俊勃

《机械工程材料》

2025

复合添加Zr、Sc对AlFeSi合金铸态组织和力学性能的影响

王豹，姜凤阳，王俊勃，许鸿捷，思芳，杨敏鸽，刘江南

《热加工工艺》

2025

工艺条件对高熵合金耐蚀性能影响的研究进展

思芳，艾根根，姜凤阳，刘江南，卫娜，王俊勃

《材料开发与应用》

DOI

2025

热时效对GCr15钢制高精度直线导轨组织演变及残余应力的影响

李超，姜凤阳，王俊勃，史迎建，思芳，崔刚，王茜

《热加工工艺》

2025

合金成分对高熵合金摩擦磨损性能影响的研究进展

艾根根，姜凤阳，思芳，刘江南，卫娜，王俊勃

《热加工工艺》

2025

The influence mechanism of morphology of SnO2 on the arc erosion resistance of Ag/SnO2 contact material

Songtao Liu, Chenyu Fang, Junbo Wang, Fang Si, Haiyun Hou, Fengyang Jiang, Suxing Chen, Jun Wang

Journal of Alloys and Compounds

DOI

2024

轧制变形量对AlFeSi0.2Sc0.2Zr合金组织与性能的影响

刘建江，刘松涛，姜凤阳，思芳，王俊勃，刘江南，王恒荣

《机械工程材料》

2024

合金成分对高熵合金涂层耐磨性影响的研究进展

姜凤阳，艾根根，思芳，刘江南，卫娜，王俊勃

《中国表面工程》

2024

退火工艺对高锰TWIP钢组织及耐蚀性能的影响

艾根根，姜凤阳，思芳，刘江南，卫娜，王俊勃

《金属热处理》

2024

SPS烧结时间对Ti2AlNb合金组织与力学性能的影响

陈金坤，姜凤阳，思芳，杜予晅，王俊勃，刘江南

《钛工业进展》

2024

二次烧结温度对放电等离子烧结制备Ti2AlNb合金显微组织和力学性能的影响

陈金坤，姜凤阳，思芳，杜予晅，王俊勃，刘江南，王恒荣

《稀有金属与硬质合金》

2024

合金成分对高熵合金及其涂层耐腐蚀性能影响的研究进展

艾根根，姜凤阳，思芳，刘江南，卫娜，王俊勃

《热加工工艺》

2024

稀土Y对GCr15钢微观组织和摩擦磨损性能的影响

姜凤阳，楚玉敏，思芳，董利军，史迎建，刘江南，王俊勃

《稀有金属与硬质合金》

2024

烧结温度对SPS制备Ti2AlNb组织与拉伸性能的影响

王恒荣，姜凤阳，思芳，杜予晅，王俊勃，刘江南，刘建江

《稀有金属与硬质合金》

2023

放电等离子烧结制备Ti2AlNb及其室温力学性能的研究

窦博，刘松涛，姜凤阳，思芳，吴天栋，王俊勃，刘江南，董玺

《稀有金属与硬质合金》

2023

工艺条件对高熵合金及其涂层摩擦磨损性能影响的研究进展

艾根根，姜凤阳，思芳，刘江南，卫娜，王俊勃

《材料导报》

2023

球磨时间对RGO-Ni/Cu粉体形貌及复合材料性能的影响

闫贞，姜凤阳，付翀，王金龙，刘鑫，张思瑶

《粉末冶金工业》

2023

退火工艺对FeCrMnNiAl0.1高熵合金显微组织及力学性能的影响

郭宝昌，姜凤阳，王俊勃，刘江南，刘浪浪

《金属热处理》

2023

时效处理对20Cr渗碳钢制高速直线导轨组织及性能影响

王俊勃，王茜，姜凤阳，董利军，史迎建，思芳，崔刚，李超

《西安工程大学学报》

2022

轧制变形对高熵合金微观组织和力学性能的影响

梅金娜，姜凤阳，卫娜，刘浪浪，思芳，刘松涛，王俊勃，刘江南

《金属热处理》

2022

Effect of Heat Treatment on Microstructure, Tensile Properties and High-Temperature Corrosion Resistance of the FeCrMnNi High Entropy Alloy

Zhen Cai, Na Wei, Yaolei Han, Fang Si, Lei Mi, Chenhui Zhang, Xiaohua Liu, Fengyang Jiang, Tiandong Wu

Metals

DOI

2022

Effect of Annealing Temperatures on Phase Stability, Mechanical Properties, and High-Temperature Steam Corrosion Resistance of (FeNi)67Cr15Mn10Al5Ti3 Alloy

Zhen Cai, Fengyang Jiang, Na Wei, Lei Mi, Chenhui Zhang, Xiaohua Liu, Fang Si, Tiandong Wu

Metals

DOI

2021

An even-load-distribution design for composite bolted joints using a novel circuit model and neural network

Cheng Qiu, Yu-Lin Han, Logesh Shanmugam, Fengyang Jiang, Zhi-Dong Guan, S. Du, Jing-Lei Yang

Composite structures

DOI

2021

Study on Prediction of Compression Performance of Composite Laminates After Impact Based on Convolutional Neural Networks

Fengyang Jiang, Zhi-Dong Guan, Xiao-Dong Wang, Zeng-Shan Li, R. Tan, Cheng Qiu

Applied Composite Materials

DOI

2020

A method of predicting visual detectability of low-velocity impact damage in composite structures based on logistic regression model

Fengyang Jiang, Zhi-Dong Guan, Zeng-Shan Li, Xiao-Dong Wang

DOI

2019

预制体浸渗法制备苎麻纤维织物SiC/Cu复合材料

张娇娇，王俊勃，马万鹏，黄健，姜凤阳，胡泽涛

《应用化工》

2019

预制体浸渗法苎麻纤维遗态Al2O3-Cu制备工艺对性能的影响

李笑然，王俊勃，胡新煜，姜凤阳，王蒙

《应用化工》

2019

预制体浸渗法苎麻纤维织物遗态结构Al2O3-Cu复合材料的制备及其性能研究

李笑然，王俊勃，胡新煜，姜凤阳，王蒙

《化工新型材料》

2019

Experimental and Numerical Investigation of Curve Section Stringer/skin Runout Under Tensile Load

Yao Wang, Zhi-Dong Guan, Xiao-Dong Wang, Fengyang Jiang, Xiaodong Liu

International Conference on Mechanical and Aerospace Engineering

DOI

2019

Cure Kinetics Characterization of Epoxy Resin by Piecewise Model Fitting Method

Xiaodong Liu, Zhi-Dong Guan, Xiao-Dong Wang, Yao Wang, Fengyang Jiang

International Conference on Mechanical and Aerospace Engineering

DOI

2018

苎麻织物遗态陶瓷及其Cu基复合材料的制备与研究

姜凤阳

《西北工业大学》

2017

Experimental Study on Relaxation Behavior of Composite laminates Impact Damages

Fengyang Jiang, Zhi-Dong Guan, Zeng-Shan Li, Jia Zeng

2010

Preparation and characterization of AgSnO2/Cu contact material by supersonic plasma spraying

Chong Fu, Fengyang Jiang, Zhimin Du, Junbo Wang, Minge Yang, Bailing Jiang

International Conference on Mechanic Automation and Control Engineering

DOI

精选作品

期刊论文

500 ℃退火保温时间对工业纯钽表面氧化层生长及综合性能的影响

Effect of Ti3AlC2 Particle Size on the Properties of Ag/Ti3AlC2 Electrical Contact Materials

Effect of holding time on the microstructure and properties of FeCrMnNiCu0.2Si0.4 high-entropy alloy

The influence of morphology of ZnO on the properties of Ag/ZnO electrical contact material

Microstructure regulation and magnetic property enhancement of NdFeB/SmPrCo composite magnets via Nano-cu grain-boundary doping

服役条件对高熵合金摩擦磨损性能影响的研究进展

不同固溶时间下Ti2AlNb基合金组织转变机制及力学性能

铜添加量对GCr15钢组织和耐腐蚀性能的影响

复合添加Zr、Sc对AlFeSi合金铸态组织和力学性能的影响

工艺条件对高熵合金耐蚀性能影响的研究进展

热时效对GCr15钢制高精度直线导轨组织演变及残余应力的影响

合金成分对高熵合金摩擦磨损性能影响的研究进展

The influence mechanism of morphology of SnO2 on the arc erosion resistance of Ag/SnO2 contact material

轧制变形量对AlFeSi0.2Sc0.2Zr合金组织与性能的影响

合金成分对高熵合金涂层耐磨性影响的研究进展

退火工艺对高锰TWIP钢组织及耐蚀性能的影响

SPS烧结时间对Ti2AlNb合金组织与力学性能的影响

二次烧结温度对放电等离子烧结制备Ti2AlNb合金显微组织和力学性能的影响

合金成分对高熵合金及其涂层耐腐蚀性能影响的研究进展

稀土Y对GCr15钢微观组织和摩擦磨损性能的影响

烧结温度对SPS制备Ti2AlNb组织与拉伸性能的影响

放电等离子烧结制备Ti2AlNb及其室温力学性能的研究

工艺条件对高熵合金及其涂层摩擦磨损性能影响的研究进展

球磨时间对RGO-Ni/Cu粉体形貌及复合材料性能的影响

退火工艺对FeCrMnNiAl0.1高熵合金显微组织及力学性能的影响

时效处理对20Cr渗碳钢制高速直线导轨组织及性能影响

轧制变形对高熵合金微观组织和力学性能的影响

Effect of Heat Treatment on Microstructure, Tensile Properties and High-Temperature Corrosion Resistance of the FeCrMnNi High Entropy Alloy

Effect of Annealing Temperatures on Phase Stability, Mechanical Properties, and High-Temperature Steam Corrosion Resistance of (FeNi)67Cr15Mn10Al5Ti3 Alloy

An even-load-distribution design for composite bolted joints using a novel circuit model and neural network

Study on Prediction of Compression Performance of Composite Laminates After Impact Based on Convolutional Neural Networks

A method of predicting visual detectability of low-velocity impact damage in composite structures based on logistic regression model

预制体浸渗法制备苎麻纤维织物SiC/Cu复合材料

预制体浸渗法苎麻纤维遗态Al2O3-Cu制备工艺对性能的影响

预制体浸渗法苎麻纤维织物遗态结构Al2O3-Cu复合材料的制备及其性能研究

Experimental and Numerical Investigation of Curve Section Stringer/skin Runout Under Tensile Load

Cure Kinetics Characterization of Epoxy Resin by Piecewise Model Fitting Method

苎麻织物遗态陶瓷及其Cu基复合材料的制备与研究

Experimental Study on Relaxation Behavior of Composite laminates Impact Damages

Preparation and characterization of AgSnO2/Cu contact material by supersonic plasma spraying

研究方向