贾振元

期刊论文

1. 马建伟，李冠霖，谢英豪，申原同，贾振元（2026）. 复杂曲面车削刀具轨迹轮廓偏差一致性控制方法. 《机械工程学报》.
2. Jian-wei Ma, Zhang Hui, Zhenyuan Jia, Qing-long Liu, Jia-liang Feng, Rui-qi Cao, Ying Yan (2026). The art of friction control: Advanced diamond-like carbon coating design for aerospace tribology. Friction.DOI
3. Xiaohang Hu, F J Wang, Gang Wei, Pengcheng Ju, Rao Fu, Zhenyuan Jia (2026). Micromechanical deformation mechanism and modeling of CF/PEEK cutting. International Journal of Mechanical Sciences.DOI
4. Jian-Wei Ma, Qian Zhang, Weinan Chen, Yong Wang, Shu-Mei Zhang, Jiaqi Shen, Guan-Lin Li, Zhenyuan Jia (2025). Optimized pose synchronization calibration method for multi-robot measurement and machining systems. Measurement.DOI
5. Hui-teng Yan, Jian-Wei Ma, Guan-Lin Li, Linyu Li, Ji-Zhi Yang, Zhenyuan Jia, W. Liu (2025). Deformation field reconstruction method for large-scale thin-walled spacecraft cabins with limited measurement points. Measurement.DOI
6. Jian-wei Ma, Hui-teng Yan, Yong Wang, Yao-wu Song, Linyu Li, Yunpeng Wang, Zhenyuan Jia (2025). Adaptive Tool Path Mapping and Planning Method for Non-Uniform Machining Allowances of Large-Scale Thin-Walled Cabin Brackets. International Journal of Precision Engineering and Manufacturing.DOI
7. Jian-wei Ma, Ziqi Zhou, Guanlin Li, Yihui Zhou, Zhenyuan Jia (2025). Surface functional structure design for enhanced mass transfer in wave rotor refrigerators: A miniature vortex bearing theory approach. International Communications in Heat and Mass Transfer.DOI
8. Gang Wei, Rao Fu, Pengcheng Ju, Xiaohang Hu, Zhenyuan Jia, Fuji Wang, Norbert Geier (2025). Cutting temperature prediction for carbon fiber-reinforced thermoplastic composites considering anisotropic-plastic features. International Journal of Mechanical Sciences.DOI
9. Fuji Wang, Xiaohang Hu, Rao Fu, Lei Ge, Pengcheng Ju, Zhenyuan Jia (2025). Theoretical analysis of cutting mechanisms for CF/epoxy and CF/PEEK considering their elasto-plastic properties. Composites Part A Applied Science and Manufacturing.DOI
10. Shu-mei Zhang, Jian-wei Ma, Qian Zhang, Zhi Li, Guanlin Li, Zhenyuan Jia (2025). A novel method for improving the accuracy of parallel robots based on efficient identification of kinematic parameters. Precision Engineering.DOI
11. Wenqi Wang, Wei Liu, Yang Liu, Yang Zhang, Zhenyuan Jia (2025). Precise 2D and 3D Hybrid Measurement of Drill Bits with Complex Geometries. Engineering.DOI
12. Jian-wei Ma, Xue-bao Tian, Ye Tao, Ziqi Zhou, Shuang Wang, Zhenyuan Jia (2025). Research on wear reduction of mid-convex type valve core based on simulation analysis: Design and application in spring-loaded check valve. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
13. 魏钢，王福吉，贾振元，鞠鹏程，胡晓杭，付饶（2024）. 虑及温度影响的CFRTP正交切削仿真与实验研究. 《复合材料学报》.
14. 贾振元（2024）. 高校推进教育科技人才一体化改革的着力点. 《中国高等教育》.
15. 贾振元（2024）. 高水平研究型大学服务高水平科技自立自强的使命、根基与能力提升. 《中国高等教育》.
16. Ma Jianwei, Guanlin Li, Hui-teng Yan, Song-hong-ze Wang, Ying-hao Xie, Zhenyuan Jia (2024). Non-interference slow tool servo turning method for complex surfaces with large undulation changes. Precision Engineering.DOI
17. Shouyan Guan, Fuji Wang, Hongquan Wang, Gongshuo Wang, Yajing Lei, Rao Fu, Zhenyuan Jia (2024). Enhancing planar compression performance of 3D printed continuous carbon fiber reinforced honeycomb sandwich structures using interleaved core paths. Journal of Manufacturing Processes.DOI
18. Jian-wei Ma, Zhi-Ben Yang, Song-Hong-Ze Wang, Yang-Xin Yuan, Zhenyuan Jia (2024). Novel numerical simulation method for quasi-continuous wave laser processing of carbon-carbon composites and its application in parameter inversion. Journal of Laser Applications.DOI
19. Jian-wei Ma, Hui Zhang, Ye Tao, Song-hong-ze Wang, Zhi-Ben Yang, Zhenyuan Jia (2023). New method of continuous-wave laser ablation for processing microgroove with variable cross-section. Optics & Laser Technology.DOI
20. Ziqi Zhou, Jian-wei Ma, Yanqiang Wang, Guoqing Hu, Yuwen Sun, Zhenyuan Jia (2023). A method to reduce the fluid mass transfer loss of rotating jet: A kind of microstructure design and research for wave rotor refrigerator. International Journal of Heat and Mass Transfer.DOI
21. Jianwei Ma, Yabin Shen, Shumei Zhang, Hui-teng Yan, Zhenyuan Jia (2023). A New Error Compensation Method for Delta Robots Combining Geometric Error Modeling With Spatial Interpolating. Journal of Mechanisms and Robotics.DOI
22. Qi Wang, Rao Fu, Fuji Wang, Chaoyang Luo, Jiankang Li, Zhenyuan Jia (2023). Effect of Temperature Distribution on Interfacial Bonding Process between CFRTP Composite and Aluminum Alloy during Laser Direct Joining. Applied Sciences.DOI
23. Jian-wei Ma, Tenglong Li, Zhenyuan Jia, Ye Tao, Wu-jiang Yu, Xue-bao Tian, Shuang Wang, Wei Liu (2023). An improved displacement adjustment method for overlarge deformation of valve at the cryogenic temperatures. Cryogenics.DOI
24. Binchao Yu, Wei LIU, Yanze Zhang, Dazhi Ma, Zhenyuan Jia, Yi Yue, Jiabo Zhang (2023). Accuracy evaluation for in-situ machining reference points binocular measurement based on credibility probability. Chinese Journal of Aeronautics.DOI
25. Feng-ze Qin, Zhenyuan Jia, Jiawei Li, Jian-wei Ma, Guanlin Li (2023). Toolpath planning method with the constraint of cutting force fluctuation in slow tool servo turning for complex curved surface parts. The International Journal of Advanced Manufacturing Technology.DOI
26. Xulin Wang, Jian-wei Ma, Zhenyuan Jia, Chuanheng Gui, Xiaoqian Qi, Wei Liu (2022). Nanosecond laser high-precision fabrication of microgrooves on TC4 surface: Morphology simulation and drag reduction performance of microgrooves. Journal of Laser Applications.DOI
27. Xulin Wang, Zhenyuan Jia, Jian-wei Ma, Dongxu Han, Xiaoqian Qi, Chuanheng Gui, Wei Liu (2022). Optimization of nanosecond laser processing for microgroove on TC4 surface by combining response surface method and genetic algorithm. Optical Engineering.DOI
28. Fuji Wang, Xinghai Jin, Xiaonan Wang, Zhenyuan Jia, Boyu Zhang (2022). Numerical Investigation on the Influences of Processing Conditions on Damage in the CFRTP Cutting Using a Novel Elastic–plastic Damage Model. Applied Composite Materials.DOI
29. Xulin Wang, Zhenyuan Jia, Jian-wei Ma, Dongxu Han, Xiaoqian Qi, Chuanheng Gui, Wei Liu (2022). Prediction method of radial heat-affected zone width in nanosecond pulsed laser ablation of TC4 titanium alloy. The International Journal of Advanced Manufacturing Technology.DOI
30. Feng-ze Qin, Jian-wei Ma, Zhenyuan Jia, Guanlin Li, Jianzhou Zhang (2022). Estimation and compensation for deviation of contour in slow tool servo precision turning for complicated curved surface. Journal of Mechanical Science and Technology.DOI
31. Xinyang Li, Zongjin Ren, Jun Zhang, Wei Liu, Zhenyuan Jia, Min Qian (2022). Development of a Shear-Type Dynamometer for High-Temperature Environment. IEEE Sensors Journal.DOI
32. Qi Wang, Zhenyuan Jia, Bo-yu Zhang, Rao Fu, Jing-Yuan Liu, Dong-zhi Han (2022). Study on interface temperature control of laser direct joining of CFRTP and aluminum alloy based on staged laser path planning. Optics & Laser Technology.DOI
33. Feng-ze Qin, Jian-wei Ma, Zhenyuan Jia, Guanlin Li, Jianzhou Zhang (2022). A Toolpath Generation Method under the Constraint of Interpolation Error in STS Precision Turning with PVT Interpolation. International Conference on Control and Robotics Engineering (ICCRE).DOI
34. Xulin Wang, Zhenyuan Jia, Jian-wei Ma, Dongxu Han, Chuanheng Gui, Xiaoqian Qi, Wei Liu (2022). Research on nanosecond laser processing of basic unit for ridge surface: forming condition of microgroove and micro-ridge structure on TC4 surface. Optical Engineering.DOI
35. Mengmeng Xi, Yongqing Wang, Haibo Liu, Haowei Xiao, Xu Li, He Li, Zhi Ding, Zhenyuan Jia (2022). Calibration of beam vector deviation for four-axis precision on-machine measurement using chromatic confocal probe. Measurement.DOI
36. Weiqi Luo, Wei Liu, Xikang Cheng, Yang Zhang, Zhenyuan Jia (2022). In Situ Magnetic Field Reconstruction and Torque Estimation for PMECCs. IEEE Transactions on Industrial Electronics.DOI
37. 贾振元，赖一楠，王福吉，陈明，李迎光，湛利华，顾伯洪，徐春广，林莉，段玉岗，叶鑫（2021）. 复合材料构件制造关键基础科学问题——第248期“双清论坛”学术综述. 《中国科学基金》.DOI
38. 刘敬元，王琦，韩东志，张博宇，贾振元，王福吉（2021）. CFRTP/Al非接触超声辅助激光连接工艺研究. 《纤维复合材料》.
39. Xulin Wang, Zhenyuan Jia, Jian-wei Ma, Wei Liu, Dongxu Han, Chuanheng Gui, Xiaoqian Qi (2021). Research on simulation of nanosecond pulsed laser processing for TC4 titanium alloy: A novel model simplification and correction method. Optics & Laser Technology.DOI
40. Jian-wei Ma, Xiao Hong Lu, Zhenyuan Jia, Guanlin Li, Ye Tao, Wei Liu (2021). Subregional Process Method With Variable Parameters Based on a Potential Field in Slow Tool Servo Machining for a Complex Curved Surface. Journal of Manufacturing Science and Engineering.DOI
41. Zhenyuan Jia, Jian Wang, Jian-wei Ma, Xulin Wang, Wenwen Jiang, Dongxu Han (2021). Nanosecond pulsed laser irradiation of metal for processing microgroove with vertical sidewalls. Journal of Laser Applications.DOI
42. Xiaonan Wang, Fuji Wang, Tianyu Gu, Zhenyuan Jia, Yu Shi (2021). Computational simulation of the damage response for machining long fibre reinforced plastic (LFRP) composite parts: A review. Composites Part A Applied Science and Manufacturing.DOI
43. Yu Bai, Zhenyuan Jia, Rao Fu, Jiaxuan Hao, Fuji Wang (2021). Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP. Composite Structures.DOI
44. Zhenyuan Jia, Xiaohong Lü, Kun Yang, Xvdong Sun, Steven Y. Liang (2021). Stability of micro-milling thin-walled part process. The International Journal of Advanced Manufacturing Technology.DOI
45. Zhenyuan Jia, Bing Liang, Wei Liu, Kun Liu, Jian-wei Ma (2021). 3D Microdisplacement Monitoring of Large Aircraft Assembly with Automated In Situ Calibration. Engineering.DOI
46. Qi Wang, Zhenyuan Jia, Bo-yu Zhang, Dun-lin Gao, Yue Ma, Jing-Yuan Liu (2021). Influence of processing parameters on joint shear performance in laser direct joining of CFRTP and aluminum alloy. Materials & Design.DOI
47. Bing Liang, Wei Liu, Kun Liu, Mengde Zhou, Yang Zhang, Zhenyuan Jia (2021). A Portable Noncontact Profile Scanning System for Aircraft Assembly. Engineering.DOI
48. 冯荻，梁冰，刘坤，姜昕彤，贾振元，刘巍（2020）. 基于应变监测的升降舵壁板变形重构方法. 《计测技术》.
49. 姜昕彤，梁冰，刘坤，冯荻，贾振元，刘巍（2020）. 面向复杂构件装配过程的工装应变预测模型. 《新技术新工艺》.DOI
50. 王帅飞，王福吉，栗盛开，王小鞑，贾振元（2020）. Al/CFRP叠层结构低频振动辅助钻削工艺研究. 《机电工程》.
51. Zhenyuan Jia, Xiaohong Lü, Han Gu, Feixiang Ruan, Steven Y. Liang (2020). Deflection prediction of micro-milling Inconel 718 thin-walled parts. Journal of Materials Processing Technology.DOI
52. Yongqing Wang, Mengmeng Xi, Haibo Liu, Zhi Ding, Wenhao Du, Xiangzhen Meng, Yanfei Sui, Jiawei Li, Zhenyuan Jia (2020). On-machine noncontact scanning of high-gradient freeform surface using chromatic confocal probe on diamond turning machine. Optics & Laser Technology.DOI
53. Jiaxuan Hao, Fuji Wang, Meng Zhao, Yu Bai, Zhenyuan Jia (2020). Drill bit with clip-edges based on the force control model for reducing the CFRP damage. Journal of Reinforced Plastics and Composites.DOI
54. Gongshuo Wang, Zhenyuan Jia, Fuji Wang, Chuanhe Dong, Bo Wu (2020). Additive Manufacturing of Continuous Carbon Fiber Reinforced Thermoplastic Composites: An Investigation on Process-Impregnation-Property Relationship. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation.DOI
55. Zhenyuan Jia, Yu Bai, Fuji Wang, Jiaxuan Hao (2020). Effect of tool wear on drilling unidirectional CFRP laminates in different fiber cutting angles. The International Journal of Advanced Manufacturing Technology.DOI
56. Xiaohong Lü, Zhenyuan Jia, Haixing Zhang, Jinhui Qiao, Yixuan Feng, Steven Y. Liang (2020). Simulation of micro-milling Inconel 718 considering scale effect. The International Journal of Advanced Manufacturing Technology.DOI
57. Jian-wei Ma, Guanlin Li, Xiao Hong Lu, Zhenyuan Jia, Feng-ze Qin, Zi-wen Qu (2020). Toolpath Regeneration in Subregional Contour-Parallel Processing Based on Isoscallop Method. IEEE/ASME Transactions on Mechatronics.DOI
58. Zhenyuan Jia, Chen Chen, Fuji Wang, Chong Zhang, Qi Wang, Jiaxuan Hao (2020). Experimental study on drilling temperature and hole quality in drilling of carbon fiber reinforced plastic/titanium stacks. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
59. Zhenyuan Jia, Chen Chen, Fuji Wang, Chong Zhang (2020). Analytical study of delamination damage and delamination-free drilling method of CFRP composite. Journal of Materials Processing Technology.DOI
60. Zhenyuan Jia, Chen Chen, Fuji Wang, Chong Zhang, Qi Wang (2020). Analytical model for delamination of CFRP during drilling of CFRP/metal stacks. The International Journal of Advanced Manufacturing Technology.DOI
61. Zhenyuan Jia, Chong Zhang, Fuji Wang, Rao Fu (2020). A mechanistic prediction model for thrust force and torque during drilling of CFRP/Ti stacks. The International Journal of Advanced Manufacturing Technology.DOI
62. Bing Liang, Wei Liu, Kun Liu, Mengde Zhou, Yang Zhang, Zhenyuan Jia (2020). A Displacement Field Perception Method for Component Digital Twin in Aircraft Assembly. Sensors.DOI
63. Jun Zhang, Jun Shao, Zongjin Ren, Xinyang Li, Zhenyuan Jia, Hengkun Shao (2020). High-accuracy calibration method based on piezoelectric dynamometer for large vector force. Australian Journal of Mechanical Engineering.DOI
64. 贾振元，肖军，湛利华，陈磊，张宇民，李刚，王福吉，高航，林莉（2019）. 大型航空复合材料承力构件制造关键技术. 《中国基础科学》.
65. 贾卫平，吴蒙华，贾振元，吴建辉，周绍安（2019）. 无掩模定域性电沉积-增材制造技术研究进展. 《稀有金属材料与工程》.
66. 贾卫平，吴蒙华，贾振元，周绍安，佐姗姗，俞维文（2019）. 磁场方向对脉冲电沉积制备Ni-ZrO2纳米复合镀层性能的影响. 《表面技术》.DOI
67. 付饶，贾振元，王福吉（2019）. CFRP低损伤钻削制孔关键技术研究. 《金属加工(冷加工)》.
68. 李辉，刘巍，张洋，张仁伟，周志龙，贾振元（2019）. 激光跟踪仪多基站转站精度模型与误差补偿. 《光学精密工程》.
69. 杨帆，王福吉，贾振元（2019）. CFRP/钛合金叠层钻削中的温度场计算研究. 《机电工程》.
70. Zhenyuan Jia, Chong Zhang, Fuji Wang, Rao Fu, Chen Chen (2019). An investigation of the effects of step drill geometry on drilling induced delamination and burr of Ti/CFRP stacks. Composite Structures.DOI
71. Fuji Wang, Boyu Zhang, Zhenyuan Jia, Xiang Zhao, Qi Wang (2019). Structural optimization method of multitooth cutter for surface damages suppression in edge trimming of Carbon Fiber Reinforced Plastics. Journal of Manufacturing Processes.DOI
72. Jian-wei Ma, Guangzhi He, Zhenyuan Jia, Xulin Wang, Jiacheng Wang (2019). Solution of maximum laser ablation depth based on dynamic energy distribution model. Materials and Manufacturing Processes.DOI
73. Xiaohong Lü, Zhenyuan Jia, Xinxin Wang, Yubo Liu, Mingyang Liu, Yixuan Feng, Steven Y. Liang (2019). Measurement and prediction of vibration displacement in micro-milling of nickel-based superalloy. Measurement.DOI
74. Xiaohong Lü, Zhenyuan Jia, Hua Wang, Yixuan Feng, Steven Y. Liang (2019). The effect of cutting parameters on micro-hardness and the prediction of Vickers hardness based on a response surface methodology for micro-milling Inconel 718. Measurement.DOI
75. Jian-wei Ma, Zhenyuan Jia, Feng-ze Qin, Dening Song, Wenwen Jiang, Siyu Chen (2019). A Five-Axis Dual NURBS Interpolator With Constant Speed at Feedrate-Sensitive Regions Under Axial Drive Constraints. Journal of Manufacturing Science and Engineering.DOI
76. Wei Liu, Hongtu Di, Yang Zhang, Yongkang Lu, Xikang Cheng, Jiacheng Cui, Zhenyuan Jia (2019). Automatic Detection and Segmentation of Laser Stripes for Industrial Measurement. IEEE Transactions on Instrumentation and Measurement.DOI
77. Mengde Zhou, Wei Liu, Linlin Tang, Zhuang Yao, Zhengquan Wen, Bing Liang, Zhenyuan Jia (2019). Multidimensional Vibration Suppression Method with Piezoelectric Control for Wind Tunnel Models. Sensors.DOI
78. Jun Zhang, Jun Shao, Zongjin Ren, Jing Yu, Xinyang Li, Zhenyuan Jia (2019). A High-Accuracy Calibration Method Using Sensor Sensitivity Difference for Piezoelectric Dynamometer. Journal of Dynamic Systems Measurement and Control.DOI
79. Xiaohong Lü, Zhenyuan Jia, Shengqian Liu, Kun Yang, Yixuan Feng, Steven Y. Liang (2019). Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle. Journal of Manufacturing Science and Engineering.DOI
80. Jiayan Zhang, Yu Tian, Zongjin Ren, Yu Han, Zhenyuan Jia (2019). Rotation Calibration Method for Thrust Based on Force Error Analysis. Experimental Techniques.DOI
81. Lei Wang, Zhenyuan Jia, Yuqin Zhu, Li Zhang (2019). Flow Field and Temperature Field of Water-Cooling-Type Magnetic Coupling. Chinese Journal of Mechanical Engineering.DOI
82. Mengde Zhou, Wei Liu, Zhuang Yao, Zhengquan Wen, Linlin Tang, Bing Liang, Xiao Li, Zhenyuan Jia (2019). Active Vibration Suppression of the Cantilever Sting for Wind Tunnel Models with Piezoelectric Control. IEEE/ASME International Conference on Advanced Intelligent Mechatronics.DOI
83. Bing Liang, Wei Liu, Xintong Jiang, Di Feng, Kun Liu, Mengde Zhou, Xiao Li, Zhenyuan Jia (2019). A Novel Automatic Calibration Method for Displacement Sensors Based on the Spatial Transformation Theory. IEEE/ASME International Conference on Advanced Intelligent Mechatronics.DOI
84. Wei Liu, Mengde Zhou, Zhengquan Wen, Zhuang Yao, Yu Liu, Shihong Wang, Xiaochun Cui, Xiaozhen Li, Bing LIANG, Zhenyuan Jia (2019). An active damping vibration control system for wind tunnel models. Chinese Journal of Aeronautics.DOI
85. Jun Zhang, Jun Shao, Zongjin Ren, Bing Wang, Hengkun Shao, Zhenyuan Jia (2019). Research on dimension coupling of piezoelectric three-component force unit based on sensor assembly error. Advances in Mechanical Engineering.DOI
86. Jun Zhang, Yu Tian, Zongjin Ren, Mei Hua, Zhenyuan Jia (2019). A novel variable force ratio test system for force measurement. Advances in Mechanical Engineering.DOI
87. Jun Zhang, Yu Han, Zongjin Ren, Jun Shao, Chuancun You, Zhenyuan Jia (2019). A New Calibration Method for Piezoelectric Testing System Based on Orthogonal Calibration Method. Journal of Dynamic Systems Measurement and Control.DOI
88. Jun Zhang, Yu Tian, Zongjin Ren, Xinlei Wang, Chuancun You, Zhenyuan Jia (2019). Thermal Force Uncertainty of Piezoelectric Dynamometer. IEEE Transactions on Instrumentation and Measurement.DOI
89. Yang Zhang, Wei Liu, Yongkang Lu, Hongtu Di, Xikang Cheng, Sitong Liu, Peng Gao, Fuji Wang, Zhenyuan Jia (2019). A 3D measurement method with accurate boundaries based on mutation feature detection of laser stripes. Measurement Science and Technology.DOI
90. Rao Fu, Zhenyuan Jia, Fuji Wang, Yan Jin, Dan Sun, De Cheng, Lujia Yang (2019). Cooling Process of Reverse Air Suctioning for Damage Suppression in Drilling CFRP Composites. Procedia CIRP.DOI
91. 王福吉，郭会彬，贾振元，马建伟，成德，胡海波（2018）. 玻璃纤维增强聚丙烯复合材料制孔损伤. 《复合材料学报》.
92. 孙晶，崔岩，刘新，孙伟，王永青，贾振元（2018）. 面向重大装备设计制造的协同育人培养体系构建. 《创新与创业教育》.
93. 鲁继文，刘巍，刘昱，贾振元，刘惟肖，张家昆，姜雨丰（2018）. 风洞模型支杆系统设计及振动主动控制. 《计测技术》.
94. 司立坤，马建伟，贾振元，崔岩，孙晶（2018）. 创新型实践课层次化教学模式探讨. 《实验室科学》.
95. 司立坤，马建伟，贾振元，刘鑫，王瑞利（2018）. 激光干涉仪测量机床精度的准直调节技巧. 《实验室科学》.
96. 刘惟肖，贾振元，刘昱，刘巍，姜雨丰，鲁继文，张家昆（2018）. 一种基于模糊自适应的速度反馈主动抑振方法. 《新技术新工艺》.
97. 张家昆，贾振元，刘昱，刘巍，刘惟肖，姜雨丰，鲁继文（2018）. 基于时滞LQR算法的风洞模型振动控制试验研究. 《新技术新工艺》.
98. 李士杰，刘巍，杨景豪，刘阳，贾振元（2018）. 基于三目极线约束的高精度基础矩阵求解方法. 《中国科技信息》.
99. 张致远，刘巍，张洋，逯永康，邸宏图，叶帆，贾振元（2018）. 基于非度量校正的大视场图像匹配参数标定法. 《光学学报》.
100. Jian-wei Ma, Dening Song, Zhenyuan Jia, Wen-Wen Jiang, Fuji Wang, Wei Liu (2018). An Equivalent-Plane Cross-Coupling Position Control for Contour-Accuracy Improvement in Three-Axis Free-Form Contour Following Tasks. Journal of Dynamic Systems Measurement and Control.DOI
101. Xiao Li, Wei Liu, Yi Pan, Bing Liang, Mengde Zhou, Hui Li, Fuji Wang, Zhenyuan Jia (2018). Monocular-vision-based contouring error detection and compensation for CNC machine tools. Precision Engineering.DOI
102. Xiaohong Lü, Furui Wang, Zhenyuan Jia, Steven Y. Liang (2018). The flank wear prediction in micro-milling Inconel 718. Industrial Lubrication and Tribology.DOI
103. Jian-wei Ma, Guo-qing Hu, Feng-ze Qin, Wei-wei Su, Zhenyuan Jia (2018). Optimization method of tool axis vector based on kinematical characteristics of rotary feed axis for curved surface machining. The International Journal of Advanced Manufacturing Technology.DOI
104. Zhenyuan Jia, Xiaoxuan Zhao, Jian-wei Ma, Siyu Chen, Feng-ze Qin, Zhao Liu (2018). Toolpath generation in sub-regional processing with constraint of constant scallop-height at boundary for complex curved surface. Precision Engineering.DOI
105. Zhenyuan Jia, Yu Bai, Fuji Wang, Jian-wei Ma, De Cheng, Zhongbiao Zhang (2018). Effect of drill flute direction on delamination at the exit in drilling Carbon Fiber Reinforced Plastic. Polymer Composites.DOI
106. Rao Fu, Zhenyuan Jia, Fuji Wang, Yan Jin, Dan Sun, Lujia Yang, De Cheng (2018). Drill-exit temperature characteristics in drilling of UD and MD CFRP composites based on infrared thermography. International Journal of Machine Tools and Manufacture.DOI
107. Fan Ye, Wei Liu, Yang Zhang, Peng Gao, Haiyang Zhao, Zhiguang Lan, Fan Yang, Zhenyuan Jia (2018). Profile measurement method of aviation part based on step boundary model. International Conference on Digital Image Processing.DOI
108. Xiaohong Lü, Haixing Zhang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang (2018). Cutting parameters optimization for MRR under the constraints of surface roughness and cutter breakage in micro-milling process. Journal of Mechanical Science and Technology.DOI
109. Zhenyuan Jia, Dening Song, Jian-wei Ma, Feng-ze Qin, Xulin Wang (2018). High-precision estimation and double-loop compensation of contouring errors in five-axis dual-NURBS toolpath following tasks. Precision Engineering.DOI
110. Xiaohong Lü, Hua Wang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang (2018). Coupled thermal and mechanical analyses of micro-milling Inconel 718. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
111. Fangyong Niu, Dongjiang Wu, Fan Lu, Gang Liu, Guangyi Ma, Zhenyuan Jia (2018). Microstructure and macro properties of Al2O3 ceramics prepared by laser engineered net shaping. Ceramics International.DOI
112. Jian-wei Ma, Dening Song, Zhenyuan Jia, Guo-qing Hu, Wei-wei Su (2018). Conversion method study from cutter-location points to nonuniform rational B-spline toolpath NC file for high-speed machining. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
113. Zhenyuan Jia, Dening Song, Jian-wei Ma, Xiaoxuan Zhao, Ning Zhang (2018). Real-Time Contour-Error Estimation Methods for Three-Dimensional Free-Form Parametric Curves in Contour-Following Tasks. International Journal of Precision Engineering and Manufacturing.DOI
114. Zhenyuan Jia, Chen Chen, Fuji Wang, Jian-wei Ma, Fan Yang (2018). Three-dimensional oblique cutting model for sub-surface damage analysis in CFRP/Ti stack composite machining. The International Journal of Advanced Manufacturing Technology.DOI
115. Jinghao Yang, Wei Liu, Renwei Zhang, Zhenyuan Jia, Fuji Wang, Shijie Li (2018). A method for measuring the thermal geometric parameters of large hot rectangular forgings based on projection feature lines. Machine Vision and Applications.DOI
116. Wei Liu, Xin Ma, Xiao Li, Yi Pan, Fuji Wang, Zhenyuan Jia (2018). A Novel Vision-Based Pose Measurement Method Considering the Refraction of Light. Sensors.DOI
117. Lei Wang, Zhenyuan Jia, Li Zhang (2018). Investigation on the accurate calculation of the temperature field of permanent magnet governor and the optimization method of heat conduction. Case Studies in Thermal Engineering.DOI
118. Jun Zhang, Yu Tian, Zongjin Ren, Jun Shao, Zhenyuan Jia (2018). A Novel Dynamic Method to Improve First-order Natural Frequency for Test Device. Measurement Science Review.DOI
119. Wei Liu, Bing Liang, Zhenyuan Jia, Di Feng, Xintong Jiang, Xiao Li, Mengde Zhou (2018). High-Accuracy Calibration Based on Linearity Adjustment for Eddy Current Displacement Sensor. Sensors.DOI
120. Bin Niu, Youliang Su, Rui Yang, Zhenyuan Jia (2018). RETRACTED: Micro-Macro-Mechanical Model and Material Removal Mechanism of Machining Carbon Fiber Reinforced Polymer. International Journal of Machine Tools and Manufacture.DOI
121. Xiaohong Lü, Zhenyuan Jia, Kun Yang, Peilin Shao, Feixiang Ruan, Yixuan Feng, Steven Y. Liang (2018). Analytical model of work hardening and simulation of the distribution of hardening in micro-milled nickel-based superalloy. The International Journal of Advanced Manufacturing Technology.DOI
122. Jun Zhang, Yu Tian, Zongjin Ren, Qingbing Chang, Zhenyuan Jia (2018). The calibration of force offset for rocket engine based on deep belief network. Measurement and Control.DOI
123. Xiao Li, Wei Liu, Yi Pan, Hui Li, Xin Ma, Zhenyuan Jia (2018). A monocular-vision-based contouring error detection method for CNC machine tools. IEEE International Instrumentation and Measurement Technology Conference.DOI
124. 仁伟 张，Wei Liu，Yongkang Lu，Yang Zhang，Jian-wei Ma，Zhenyuan Jia (2018). Local high precision 3D measurement based on line laser measuring instrument. Young Scientists Forum 2017.DOI
125. Haiyang Zhao, Yang Zhang, Zhiyuan Zhang, Hongtu Di, Bing Liang, Hongwen Xing, Zhenyuan Jia, Liu Wei (2018). High-precision binocular measuring method considering three-dimensional distortion. Young Scientists Forum 2017.DOI
126. Zhenyuan Jia (2018). The Research of Machining Mechanism of Carbon Fiber Reinforced Plastic. Journal of Mechanical Engineering.DOI
127. Xiaohong Lu, Hua Wang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang (2018). Effects of cutting parameters on temperature and temperature prediction in micro-milling of Inconel 718. International Journal of Nanomanufacturing.DOI
128. Lei Wang, Zhenyuan Jia, Li Zhang, Hao Liu (2018). Analysis of the Soft Starting of Adjustable Speed Asynchronous Magnetic Coupling Used in Belt Conveyor. Communications in computer and information science.DOI
129. Xiaohong Lu, Zhenyuan Jia, Hua Wang, Yixuan Feng, Steven Y. Liang (2018). Strain hardening properties and the relationship between strain and hardness of Inconel 718. International Journal of Manufacturing Research.DOI
130. 钱宝伟，刘巍，贾振元，付饶，白玉，何春伶（2017）. 双顶角钻头钻削CFRP复合材料的刀具磨损机制. 《复合材料学报》.
131. 王毅丹，王宣平，康仁科，孙健淞，贾振元，董志刚（2017）. 直刃尖刀超声辅助切割Nomex蜂窝芯切削力分析. 《机械工程学报》.
132. 王福吉，成德，贾振元，付饶（2017）. 冷却空气流向对CFRP制孔刀具磨损及孔质量影响的研究. 《第三届中国国际复合材料科技大会摘要集-分会场11-15》.
133. Fuji Wang, Xiaonan Wang, Zhenyuan Jia, Rao Fu, Yu Bai, Youliang Su (2017). NUMERICAL SIMULATION OF THE DRILLING OF CARBON FIBER REINFORCED PLASTICS ON THE MACROSCOPIC AND MICROSCOPIC SCALES. 《第二十一届国际复合材料大会论文集 专题六》.
134. Chong Zhang, Zhenyuan Jia, Fuji Wang, GuangJ ian Bi, Boyu Zhang, Junwei Yin (2017). DESIGN OF A NEW ONE-SHOT TOOL WITH DOUBLE MARGINS STRUCTURE IN DRILLING TITANIUM/COMPOSITE STACKS. 《第二十一届国际复合材料大会摘要集—专题六》.
135. Chen Chen, Zhenyuan Jia, Fuji Wang, Bin Niu, Fan Yang, Guangjian Bi (2017). THE EFFECT OF INTERACTION BETWEEN TITANIUM ALLOY AND CFRP ON THE INTERFACE DAMAGE IN CUTTING TI/CFRP STACK COMPOSITE. 《第二十一届国际复合材料大会论文集 专题一》.
136. 刘巍，张洋，高鹏，杨帆，兰志广，李晓东，贾振元，高航（2017）. 结合分层处理的激光光条亚像素中心提取方法. 《红外与激光工程》.
137. 徐鹏涛，刘阳，贾振元，樊超楠，刘巍（2017）. 激光器阵列调节装置及其控制系统设计. 《中南大学学报(自然科学版)》.
138. 郭东明，贾振元，杨睿，钱卫（2017）. 大型风洞气动弹性试验模型/支撑制造、感知与控制的科学问题. 《中国科学基金》.
139. 丁立超，刘巍，高鹏，贾振元（2017）. 应用显微视觉的跨尺度几何参数测量方法. 《机械设计与制造》.
140. 孙晶，刘新，王殿龙，孙伟，贾振元（2017）. 面向工程教育的毕业要求指标体系构建与实践. 《实验室科学》.
141. 赵凯，贾振元（2017）. 工程塑料复杂曲面零件表层跨尺度金属图案精密制造技术. 《金属加工(冷加工)》.
142. 赵海洋，张洋，兰志广，李汝鹏，刘巍，邢宏文，肖睿恒，贾振元（2017）. 基于点云三维重构的配合面装配间隙分析方法研究. 《计测技术》.
143. 刘巍，高鹏，张洋，杨帆，李晓东，兰志广，贾振元，高航（2017）. 面向大型零部件的三维形面高精度测量方法. 《红外与激光工程》.
144. Jian-wei Ma, Guo-qing Hu, Zhenyuan Jia, Ning Zhang, Fuji Wang (2017). Effect of geometric feature and cutting direction on variation of force and vibration in high-speed milling of TC4 curved surface. The International Journal of Advanced Manufacturing Technology.DOI
145. Kuo Liu, Te Li, Tiejun Li, Tiejun Li, Tiejun Li, Yu Liu, Yongqing Wang, Zhenyuan Jia (2017). Thermal behavior analysis of horizontal CNC lathe spindle and compensation for radial thermal drift error. The International Journal of Advanced Manufacturing Technology.DOI
146. Jian-wei Ma, Dening Song, Zhenyuan Jia, Guo-qing Hu, Wei-wei Su, Likun Si (2017). Tool-path planning with constraint of cutting force fluctuation for curved surface machining. Precision Engineering.DOI
147. Jian-wei Ma, Dening Song, Zhenyuan Jia, Ning Zhang, Guo-qing Hu, Wei-Wei Su (2017). Adaptive Pre-Compensation of the Contouring Error for High-Precision Parametric Curved Contour Following.DOI
148. Zhenyuan Jia, Jian-wei Ma, Dening Song, Fuji Wang, Wei Liu (2017). A review of contouring-error reduction method in multi-axis CNC machining. International Journal of Machine Tools and Manufacture.DOI
149. Dening Song, Jian-wei Ma, Zhenyuan Jia, Feng-ze Qin, Xiaoxuan Zhao (2017). Synergistic real-time compensation of tracking and contouring errors for precise parametric curved contour following systems. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
150. Xiaohong Lü, Haixing Zhang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang (2017). Floor surface roughness model considering tool vibration in the process of micro-milling. The International Journal of Advanced Manufacturing Technology.DOI
151. Fuji Wang, Baowei Qian, Zhenyuan Jia, De Cheng, Rao Fu (2017). Effects of cooling position on tool wear reduction of secondary cutting edge corner of one-shot drill bit in drilling CFRP. The International Journal of Advanced Manufacturing Technology.DOI
152. Xiaohong Lü, Xiaochen Hu, Zhenyuan Jia, Mingyang Liu, Song Fu Gao, Chenglin Qu, Steven Y. Liang (2017). Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718. The International Journal of Advanced Manufacturing Technology.DOI
153. Wei Liu, Xiao Li, Zhenyuan Jia, Hui Li, Xin Ma, Hongyue Yan, Jian-wei Ma (2017). Binocular-vision-based error detection system and identification method for PIGEs of rotary axis in five-axis machine tool. Precision Engineering.DOI
154. Wei Liu, Wei LIU, Xin Ma, Ling Chen, Zhenyuan Jia, Weixiao Liu, Weixiao Liu, Xiao Li, Jiakun Zhang, Jiwen Lu (2017). Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel. Chinese Journal of Aeronautics.DOI
155. Jian-wei Ma, Wei-wei Su, Zhenyuan Jia, Dening Song, Guo-qing Hu (2017). An optimization method of tool-path parameters for curved surface by construction of cutter location mesh units. The International Journal of Advanced Manufacturing Technology.DOI
156. Zhenyuan Jia, Lei Jin, Wei Liu, Zongjin Ren (2017). Influence of sheet roughness on the sensitivity of piezoelectric force sensors. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
157. Yang Zhang, Fan Yang, Wei Liu, Zhiyuan Zhang, Haiyang Zhao, Zhiguang Lan, Peng Gao, Zhenyuan Jia (2017). An improved measurement method for large aviation part based on spatial constraint calibration and compression extraction. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
158. Zhenyuan Jia, Dening Song, Jian-wei Ma, Xiaoxuan Zhao, WeiWei Su (2017). Adaptive estimation and nonlinear variable gain compensation of the contouring error for precise parametric curve following. Science China Technological Sciences.DOI
159. Jian-wei Ma, Zhenyuan Jia, Guangzhi He, Zhen Liu, Xiaoxuan Zhao, Feng-ze Qin (2017). Influence of cutting tool geometrical parameters on tool wear in high-speed milling of Inconel 718 curved surface. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
160. Xiaohong Lü, Zhenyuan Jia, Yanjun Lu, Yixuan Feng, Steven Y. Liang (2017). Predicting the surface hardness of micro-milled nickel-base superalloy Inconel 718. The International Journal of Advanced Manufacturing Technology.DOI
161. Xiaohong Lü, Furui Wang, Zhenyuan Jia, Likun Si, Yongqiang Weng (2017). Influence of feed per tooth on tool wear based on 3D finite element simulation in micro-milling of Inconel 718. Industrial Lubrication and Tribology.DOI
162. Xiaohong Lü, Haixing Zhang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang (2017). A New Method for the Prediction of Micro-Milling Tool Breakage.DOI
163. Xiaohong Lü, Hua Wang, Zhenyuan Jia, Likun Si, Steven Y. Liang (2017). Effects of Tool Nose Corner Radius and Main Cutting-Edge Radius on Cutting Temperature in Micro-Milling Inconel 718 Process.DOI
164. Wei Liu, Xiao Li, Zhenyuan Jia, Hongyue Yan, Xin Ma (2017). A three-dimensional triangular vision-based contouring error detection system and method for machine tools. Precision Engineering.DOI
165. Fuji Wang, Baowei Qian, Zhenyuan Jia, Rao Fu, De Cheng (2017). Secondary cutting edge wear of one-shot drill bit in drilling CFRP and its impact on hole quality. Composite Structures.DOI
166. Baowei Qian, Wei Liu, Zhenyuan Jia, Rao Fu, Yu Bai, Chunling He (2017). Wear mechanism of double point angle drill bit in drilling CFRP composites. Research Portal (Queen's University Belfast).DOI
167. Fuji Wang, Junwei Yin, Zhenyuan Jia, Bin Niu, Wei Liu (2017). A novel approach to evaluate the delamination extent after edge trimming of carbon-fiber-reinforced composites. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
168. Jian-wei Ma, Zhenyuan Jia, Dening Song, Wei-wei Su, Guo-qing Hu, Likun Si (2017). High-adaptable prediction method of flat-end milling force based on material properties for difficult-to-machine materials. The International Journal of Advanced Manufacturing Technology.DOI
169. Xiaohong Lü, Furui Wang, Zhenyuan Jia, Likun Si, Chi Zhang, Steven Y. Liang (2017). A modified analytical cutting force prediction model under the tool flank wear effect in micro-milling nickel-based superalloy. The International Journal of Advanced Manufacturing Technology.DOI
170. Fuji Wang, Junwei Yin, Jian-wei Ma, Zhenyuan Jia, Fan Yang, Bin Niu (2017). Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates. The International Journal of Advanced Manufacturing Technology.DOI
171. Jian-wei Ma, Zhen Liu, Zhenyuan Jia, Dening Song, Yuanyuan Gao, Likun Si (2017). Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface. The International Journal of Advanced Manufacturing Technology.DOI
172. Jian-wei Ma, Zhenyuan Jia, Dening Song, Fuji Wang, Likun Si (2017). Machining error reduction by combining of feed-speed optimization and toolpath modification in high-speed machining for parts with rapidly varied geometric features. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
173. Yang Zhang, Wei Liu, Zhiguang Lan, Zhiyuan Zhang, Fan Ye, Haiyang Zhao, Xiaodong Li, Zhenyuan Jia (2017). Global Measurement Method for Large-Scale Components Based on a Multiple Field of View Combination. Journal of Sensors.DOI
174. Yu Tian, Jun Zhang, Zongjin Ren, Wei Liu, Zhenyuan Jia, Qingbing Chang (2017). A novel calibration method based on Kirchhoff theory for piezoelectric dynamometer. Sensor Review.DOI
175. Jian-wei Ma, De-Ning Song, Yuanyuan Gao, Zhenyuan Jia (2017). Reduction of the Contouring Error in High-Feed-Speed Machining by Real-Time Tracking-Error Compensation.DOI
176. Shasha Wang, Zhenyuan Jia, Xiaohong Lü, Haixing Zhang, Chi Zhang, Steven Y. Liang (2017). Simultaneous optimization of fixture and cutting parameters of thin-walled workpieces based on particle swarm optimization algorithm. SIMULATION.DOI
177. Xiaohong Lu, Zhenyuan Jia, Xiaochen Hu, Wentao Wang (2017). Double position sensitive detectors (PSDs) based measurement system of trajectory tracking of a moving target. Engineering Computations.DOI
178. Xiaohong Lu, Zhenyuan Jia, Hua Wang, Xiaochen Hu, Guangjun Li, Likun Si (2017). Measurement-based modelling of cutting forces in micro-milling of Inconel 718. International Journal of Nanomanufacturing.DOI
179. 贾振元，何春伶，付饶，王福吉，王小楠，钱宝伟（2016）. 基于CFRP层合板钻削轴向力时变曲线的钻头几何形状分析. 《复合材料学报》.
180. 贾振元，宿友亮，张博宇，陈晨，王福吉（2016）. 基于径向基函数神经网络的CFRP切削力预测. 《复合材料学报》.
181. 刘巍，陈玲，马鑫，李肖，贾振元（2016）. 基于彩色图像的高速目标单目位姿测量方法. 《仪器仪表学报》.DOI
182. 高汉卿，贾振元，王福吉，宿友亮，朱浩杰（2016）. 基于细观仿真建模的CFRP细观破坏. 《复合材料学报》.
183. 贾振元（2016）. 建设“双一流”实验室支撑至关重要. 《实验室研究与探索》.
184. 刘巍，王亮，樊超楠，杨景豪，徐鹏涛，贾振元（2016）. 大型高温锻件在线视觉测量图像匹配方法. 《激光与红外》.
185. 杨帆，刘巍，张洋，高鹏，贾振元（2016）. 结合四角共线约束的大视场双目相机标定方法. 《光学学报》.
186. 贾振元，樊超楠，刘巍，杨景豪，徐鹏涛（2016）. 双目视觉测量中等匹配点的光条中心提取. 《光学精密工程》.
187. 杨景豪，刘巍，刘阳，王福吉，贾振元（2016）. 双目立体视觉测量系统的标定. 《光学精密工程》.
188. 贾振元，赵凯，刘巍，丁立超（2016）. 工程塑料表面金属覆层的激光定域精细去除. 《光学精密工程》.
189. 刘阳，刘巍，徐鹏涛，王灵丽，贾振元（2016）. 基于纯平移两视图几何的镜头畸变参数标定. 《光学精密工程》.
190. 樊超楠，刘巍，刘阳，王灵丽，贾振元（2016）. 激光辅助的大型回转类零件直径实时测量方法. 《红外与激光工程》.
191. 刘巍，李肖，马鑫，贾振元，陈玲，刘惟肖（2016）. 采用复合式靶标的近景大视场相机标定方法. 《红外与激光工程》.
192. 李晓东，刘巍，杨帆，张洋，高鹏，贾振元（2016）. 视觉测量中动态编码点的设计与检测. 《计测技术》.
193. Zhenyuan Jia, Dening Song, Jian-wei Ma, Guo-qing Hu, Wei-wei Su (2016). A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints. International Journal of Machine Tools and Manufacture.DOI
194. Youliang Su, Zhenyuan Jia, Bin Niu, Guangjian Bi (2016). Size effect of depth of cut on chip formation mechanism in machining of CFRP. Composite Structures.DOI
195. Jian-wei Ma, Yuanyuan Gao, Zhenyuan Jia, Dening Song, Likun Si (2016). Influence of spindle speed on tool wear in high-speed milling of Inconel 718 curved surface parts. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
196. Zhenyuan Jia, Youliang Su, Bin Niu, Yu Bai, Guangjian Bi (2016). Deterioration of polycrystalline diamond tools in milling of carbon-fiber-reinforced plastic. Journal of Composite Materials.DOI
197. Bin Niu, Youliang Su, Rui Yang, Zhenyuan Jia (2016). RETRACTED: Micro-macro-mechanical model and material removal mechanism of machining carbon fiber reinforced polymer. International Journal of Machine Tools and Manufacture.DOI
198. Chaonan Fan, Wei Liu, Pengtao Xu, Yang Liu, Jinghao Yang, Lingli Wang, Zhenyuan Jia (2016). Image processing in dimensional measurement for hot large forgings based on laser-aided binocular machine vision system. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
199. Zhenyuan Jia, Rao Fu, Bin Niu, Baowei Qian, Yu Bai, Fuji Wang (2016). Novel drill structure for damage reduction in drilling CFRP composites. International Journal of Machine Tools and Manufacture.DOI
200. Dening Song, Jian-wei Ma, Zhenyuan Jia, Yuanyuan Gao (2016). Estimation and compensation for continuous-path running trajectory error in high-feed-speed machining. The International Journal of Advanced Manufacturing Technology.DOI
201. Rao Fu, Zhenyuan Jia, Fuji Wang, Youliang Su, Junwei Yin, Bin Niu, Wei Liu (2016). Design of a new tool with intermittent-sawtooth structure for damage reduction in drilling of CFRP composites. Research Portal (Queen's University Belfast).
202. Fuda Ning, Weilong Cong, Zhenyuan Jia, Fuji Wang, Meng Zhang (2016). Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling: Effects of Process Parameters.DOI
203. Youliang Su, Fuji Wang, Zhenyuan Jia, Junwei Yin, Rao Fu, Bin Niu, Wei Liu (2016). Effect of the ratio of cutting depth to edge diameter on chip formation mechanism in machining of CFRPs.
204. Kai Zhao, Zhenyuan Jia, Yuanyuan Gao, Lichao Ding (2016). Experimental investigation and processing optimization for micro-milling of copper clad polyimide. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
205. Xin Ma, Wei Liu, Ling Chen, Li Xiao, Zhenyuan Jia, Zhiliang Shang (2016). Simulative technology for auxiliary fuel tank separation in a wind tunnel. Chinese Journal of Aeronautics.DOI
206. Zhenyuan Jia, Dening Song, Jian-wei Ma, Yuanyuan Gao (2016). Pre-compensation for continuous-path running trajectory error in high-speed machining of parts with varied curvature features. Chinese Journal of Mechanical Engineering.DOI
207. Xiaohong Lü, Zhenyuan Jia, Furui Wang, Guangjun Li, Likun Si, Lusi Gao (2016). Model of the instantaneous undeformed chip thickness in micro-milling based on tooth trajectory. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
208. Zhenyuan Jia, Youliang Su, Bin Niu, Boyu Zhang, Fuji Wang (2016). The interaction between the cutting force and induced sub-surface damage in machining of carbon fiber-reinforced plastics. Journal of Reinforced Plastics and Composites.DOI
209. Zhenyuan Jia, Rao Fu, Fuji Wang, Baowei Qian, Chunling He (2016). Temperature effects in end milling carbon fiber reinforced polymer composites. Polymer Composites.DOI
210. Xiaohong Lü, Zhenyuan Jia, Hua Wang, Likun Si, Yongyun Liu, Wenyi Wu (2016). Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy. Industrial Lubrication and Tribology.DOI
211. Zhenyuan Jia, Jie Ge, Jian-wei Ma, Yuanyuan Gao, Zhen Liu (2016). A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials. The International Journal of Advanced Manufacturing Technology.DOI
212. Xiaohong Lü, Zhenyuan Jia, Hua Wang, Xinxin Wang, Likun Si, Lusi Gao (2016). Stability analysis for micro-milling nickel-based superalloy process. The International Journal of Advanced Manufacturing Technology.DOI
213. Wei Liu, Lichao Ding, Kai Zhao, Xiao Li, Ling E. Wang, Zhenyuan Jia (2016). Precise positioning method for multi-process connecting based on binocular vision. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
214. Yang Liu, Yang Liu, Zhenyuan Jia, Wei Liu, Lingli Wang, Chaonan Fan, Pengtao Xu, Jinghao Yang, Kai Zhao (2016). An improved image acquisition method for measuring hot forgings using machine vision. Sensors and Actuators A Physical.DOI
215. Xiaohong Lü, Zhenyuan Jia, Hua Wang, Likun Si, Xinxin Wang (2016). Surface roughness prediction model of micro-milling Inconel 718 with consideration of tool wear. International Journal of Nanomanufacturing.DOI
216. Haibo Liu, Liang Zhao, Te Li, Hou Bo, Yongqing Wang, Yue Ma, Zhenyuan Jia (2016). Multi-point Clamping with Automatic Collision Avoidance for Aircraft Structural Parts Machining. Procedia Manufacturing.DOI
217. Zhenyuan Jia, Yuqin Chen, Wei Liu, Kai Zhao, Ling Wang, Xianming Tu (2016). The control system for precise five-axis laser/micro-milling machine tool. International Journal of Industrial and Systems Engineering.DOI
218. Wei Liu, Yang Zhang, Fan Yang, Peng Gao, Zhiguang Lan, Zhenyuan Jia, Hang Gao (2016). A Measurement Method for Large Parts Combining with Feature Compression Extraction and Directed Edge-Point Criterion. Sensors.DOI
219. Wei Liu, Wei Liu, Xin Ma, Zhenyuan Jia, Wenbo Lu, Zhengqu Wang, Ling Chen, Jiwen Lu, Weixiao Liu, Jiwen Lu (2016). An experimental system for release simulation of internal stores in a supersonic wind tunnel. Chinese Journal of Aeronautics.DOI
220. Zhenyuan Jia, Chunling He, Rao Fu, Fuji Wang, Xiaonan Wang, Baowei Qian (2016). Analysis of drilling bit geometry based on time varying curve of drilling thrust force for CFRP composite laminates.DOI
221. Yu Tian, Jun Zhang, Zongjin Ren, Wei Liu, Zhenyuan Jia, Yazhou Qi (2016). A novel piezoelectric dynamometer based on double-sensor for thermal compensation. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
222. Zhenyuan Jia, Lei Jin, Wei Liu, Zongjin Ren (2016). A Novel Strategy to Eliminate the Influence of Water Adsorption on Quartz Surfaces on Piezoelectric Dynamometers. Sensors.DOI
223. Wei Liu, Liang Wang, Zhenyuan Jia, Chaonan Fan, Jinghao Yang, Pengtao Xu, Lingli Wang, Liu Yang (2016). A suppression method of image noise for cylindrical objects based on vision sensors. Sensors and Actuators A Physical.DOI
224. Wei Liu, Xin Ma, Ling Chen, Jinghao Yang, Zhenyuan Jia (2016). A monocular vision 3D measurement method based on refraction of light. IEEE International Symposium on Industrial Electronics (ISIE).DOI
225. Jinghao Yang, Wei Liu, Chaonan Fan, Shijie Li, Fuji Wang, Zhenyuan Jia, Hongyue Yan, Xiao Li (2016). Improved calibration method of binocular vision measurement system for large hot forging. IEEE International Symposium on Industrial Electronics (ISIE).DOI
226. 刘巍，尚志亮，马鑫，张洋，李肖，贾振元（2015）. 基于彩色编码的副油箱风洞模型位姿测量方法. 《航空学报》.
227. 许强，马建伟，贾振元（2015）. 基于Open CASCADE的复杂曲面零件快速分割. 《制造业自动化》.
228. 贾振元，王灵丽，刘巍，刘阳，樊超楠（2015）. 互参考激光光条图像质量评价. 《光学精密工程》.
229. 刘巍，张驰，刘阳，王灵丽，樊超楠，贾振元（2015）. 高斯混合分布激光中心线提取方法. 《激光与红外》.
230. 刘巍，毕晓丹，贾振元，刘伟国（2015）. 风洞模型主动抑振器的设计与实验. 《光学精密工程》.
231. Jian-wei Ma, Fuji Wang, Zhenyuan Jia, Yuanyuan Gao (2015). Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface. Materials and Manufacturing Processes.DOI
232. Ji yun Qin, Zhenyuan Jia, Jian-wei Ma, Zongjin Ren, Dening Song (2015). An efficient 5-axis toolpath optimization algorithm for machining parts with abrupt curvature. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
233. Jian-wei Ma, Zhenyuan Jia, Fuji Wang, Yuanyuan Gao, Zhen Liu (2015). A new cutting force modeling method in high-speed milling of curved surface with difficult-to-machine material. The International Journal of Advanced Manufacturing Technology.DOI
234. Yuanyuan Gao, Jian-wei Ma, Zhenyuan Jia, Fuji Wang, Likun Si, Dening Song (2015). Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface. The International Journal of Advanced Manufacturing Technology.DOI
235. Zhenyuan Jia, Lingli Wang, Wei Liu, Jinghao Yang, Yang Liu, Chaonan Fan, Kai Zhao (2015). A field measurement method for large objects based on a multi-view stereo vision system. Sensors and Actuators A Physical.DOI
236. Xiaohong Lü, Zhenyuan Jia, Xinxin Wang, Guangjun Li, Zongjin Ren (2015). Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based superalloy. The International Journal of Advanced Manufacturing Technology.DOI
237. Zhenyuan Jia, Jinghao Yang, Wei Liu, Fuji Wang, Yang Liu, Lingli Wang, Chaonan Fan, Kai Zhao (2015). Improved camera calibration method based on perpendicularity compensation for binocular stereo vision measurement system. Optics Express.DOI
238. Xinxin Wang, Xiaohong Lü, Zhenyuan Jia, Wentao Wang, Fengchen Wang (2015). Control system for micro milling machine. International Journal of Industrial and Systems Engineering.DOI
239. Jian-wei Ma, Fuji Wang, Zhenyuan Jia, Li Wei (2015). A new planning method for sample points of free-form curved surface. International Journal of Computer Applications in Technology.DOI
240. Yang Zhang, Wei Liu, Xiaodong Li, Fan Yang, Peng Gao, Zhenyuan Jia (2015). Accuracy improvement in laser stripe extraction for large-scale triangulation scanning measurement system. Optical Engineering.DOI
241. Zhenyuan Jia, Yang Liu, Wei Liu, Chi Zhang, Jinghao Yang, Lingli Wang, Kai Zhao (2015). A spectrum selection method based on SNR for the machine vision measurement of large hot forgings. Optik.DOI
242. Wei Liu, Xin Ma, Xiao Li, Ling Chen, Yang Zhang, Xiaodong Li, Zhiliang Shang, Zhenyuan Jia (2015). High-precision pose measurement method in wind tunnels based on laser-aided vision technology. Chinese Journal of Aeronautics.DOI
243. Fuji Wang, Jian-wei Ma, Qiang Xu, Zhenyuan Jia, Yan-yu Yang (2015). Quick segmentation for complex curved surface with local geometric feature based on IGES and Open CASCADE. Advances in Engineering Software.DOI
244. Kai Zhao, Zhenyuan Jia, Wei Liu, Jian-wei Ma, Lichao Ding (2015). Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling. Materials and Manufacturing Processes.DOI
245. Zhenyuan Jia, Dongming Guo, Yuwen Sun (2015). Integrated measurement and machining technology of complex surfaces. Chinese Science Bulletin (Chinese Version).DOI
246. Xinxin Wang, LU Xiao-hong, Zhenyuan Jia, Guangjun Li, Wenyi Wu (2015). The application of micro-milling technology in the processing of micro-strip antenna. International Journal of Materials and Product Technology.DOI
247. 贾振元，高翼飞，任宗金，刘巍（2014）. 六维力压电天平研制与静态性能测试研究. 《大连理工大学学报》.
248. 贾振元，王福吉，王永青，郭东明（2014）. 多源约束面形再设计复杂曲面零件显式关联模型. 《机械工程学报》.
249. 刘巍，张洋，马鑫，尚志亮，贾振元（2014）. 基于双目视觉的转动惯量测量方法. 《仪器仪表学报》.DOI
250. 胡晓雄，贾育秦，贾振元，张为民（2014）. 6-PUS虚拟轴机床的运动学正解研究. 《组合机床与自动化加工技术》.
251. Wei Liu, Xin Ma, Zhenyuan Jia, Yang Zhang, Zhiliang Shang, Xiao Li (2014). Position and attitude measurement of high-speed isolates for hypersonic facilities. Measurement.DOI
252. Zhenyuan Jia, Liqi Zhao, Zongjin Ren, Fei Wang, Dong Li, Weilei Ji (2014). Investigation into Influence of Feed Speed on Surface Roughness in Wire Sawing. Materials and Manufacturing Processes.DOI
253. Kai Zhao, Zhenyuan Jia, Wei Liu, Jian-wei Ma, Ling Wang (2014). Material removal with constant depth in CNC laser milling based on adaptive control of laser fluence. The International Journal of Advanced Manufacturing Technology.DOI
254. Zhenyuan Jia, Ling Wang, Jian-wei Ma, Kai Zhao, Wei Liu (2014). Feed speed scheduling method for parts with rapidly varied geometric feature based on drive constraint of NC machine tool. International Journal of Machine Tools and Manufacture.DOI
255. Jian-wei Ma, Fuji Wang, Zhenyuan Jia, Qiang Xu, Yan-yu Yang (2014). Study of machining parameter optimization in high speed milling of Inconel 718 curved surface based on cutting force. The International Journal of Advanced Manufacturing Technology.DOI
256. Kai Zhao, Zhenyuan Jia, Jian-wei Ma, Wei Liu, Ling E. Wang (2014). Nanosecond multi-pulse laser milling for certain area removal of metal coating on plastics surface. Optics and Lasers in Engineering.DOI
257. Jian-wei Ma, Zhenyuan Jia, Fuji Wang, Fuda Ning (2014). Spindle Speed Selection for High-Speed Milling of Titanium Alloy Curved Surface. Materials and Manufacturing Processes.DOI
258. Zhenyuan Jia, Fuji Wang, Yongqing Wang, Dongming Guo (2014). Explicit correlation model of multi-source constraints for Re-design parts with complex curved surface. Chinese Journal of Mechanical Engineering.DOI
259. Fuda Ning, Fuji Wang, Zhenyuan Jia, Jian-wei Ma (2014). Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 718. International Journal of Machining and Machinability of Materials.DOI
260. Zhenyuan Jia, Kai Zhao, Wei Liu, Jian-wei Ma, Ling E. Wang (2014). Nanosecond pulsed laser processing circuits on the copper clad polyimide. International Journal of Machining and Machinability of Materials.DOI
261. Zhenyuan Jia, Xin Ma, Wei Liu, Wenbo Lu, Xiao Li, Ling Chen, Zhengqu Wang, Xiaochun Cui (2014). Pose Measurement Method and Experiments for High-Speed Rolling Targets in a Wind Tunnel. Sensors.DOI
262. Wei Liu, Zhenyuan Jia, Shangbo Zou, Lingxuan Zhang (2014). A real-time predictive control method of discharge state for micro-EDM based on calamities grey prediction theory. The International Journal of Advanced Manufacturing Technology.DOI
263. Wei Liu, Zhenyuan Jia, Shangbo Zou, Xinyi Zheng (2014). A New Measurement Method of Relative Volume Wear Ratio Based on Discharge Debris Composition Analysis in Micro-EDM. Advances in Mechanical Engineering.DOI
264. Zhenyuan Jia, Yifei Gao, Zongjin Ren, Wei Liu, Yongyan Shang, Shengnan Gao (2014). Research on the characteristics of a piezoelectric balance for the dynamic motion device. International Journal of Industrial and Systems Engineering.DOI
265. 刘巍，邹尚博，张玲瑄，贾振元（2013）. 难加工合金微细通道电火花加工工艺规律研究. 《大连理工大学学报》.
266. 贾振元，孙伟，王殿龙，段春争（2013）. 高等院校机械工程专业青年教师工程实践能力培养的探索和实践. 《教育教学论坛》.
267. 贾卫平，贾振元，苗斌，吴蒙华，吴承原（2013）. 垂直磁场作用下电沉积数值分析与实验. 《大连理工大学学报》.
268. 贾振元，王福吉，邹君，刘慧芳（2013）. 超磁致伸缩材料传感/执行器的原理与应用. 《振动、测试与诊断》.
269. 王殿龙，贾振元（2013）. 卓越工程师教育培养计划企业阶段的培养实践. 《教育教学论坛》.
270. 卢晓红，韩鹏卓，武文毅，李光俊，贾振元（2013）. 双环盘式刀库结构参数优化. 《组合机床与自动化加工技术》.
271. 王鑫鑫，卢晓红，贾振元，贾旭，李光俊，武文毅（2013）. 微铣削表面粗糙度预测模型的研究. 《新型工业化》.
272. Zhenyuan Jia, Jian-wei Ma, Fuji Wang, Yi-ming Ding (2013). Investigation of a measurement scheme based on IGES. Measurement.DOI
273. Zongjin Ren, Zhenyuan Jia, Jun Zhang, Yongyan Shang, Shengnan Gao (2013). Research on the Dynamic Error and Acceleration Compensation for the Piezoelectric Sensor. DOAJ (DOAJ: Directory of Open Access Journals).
274. Zhenyuan Jia, Yongyan Shang, Zongjin Ren, Yifei Gao, Shengnan GAO (2013). Research on the Structure and Signal Transmission of Rotary Piezoelectric Dynamometer. DOAJ (DOAJ: Directory of Open Access Journals).
275. Xiaohong Lü, Zhenyuan Jia, Shengnan Gao, Pengzhuo Han (2013). Failure Mode Effects and Criticality Analysis (FMECA) of Circular Tool Magazine and ATC. Journal of Failure Analysis and Prevention.DOI
276. Xinxin Wang, Xiaohong Lü, Zhenyuan Jia, Xv Jia, Guangjun Li, Wenyi Wu (2013). Research on the prediction model of micro-milling surface roughness. International Journal of Nanomanufacturing.DOI
277. Zhenyuan Jia, Yifei Gao, Zongjin Ren, Shengnan Gao, Yongyan Shang (2013). Design and calibration method for a novel six-component piezoelectric balance. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
278. Wei Liu, Xianming Tu, Zhenyuan Jia, Wenqiang Wang, Xin Ma, Xiaodan Bi (2013). An improved surface roughness measurement method for micro-heterogeneous texture in deep hole based on gray-level co-occurrence matrix and support vector machine. The International Journal of Advanced Manufacturing Technology.DOI
279. Zongjin Ren, Shengnan Gao, Zhenyuan Jia, Yongyan Shang, Yifei Gao (2013). Piezoelectric Sensor of Control Surface Hinge Moment. DOAJ (DOAJ: Directory of Open Access Journals).
280. Yifei Gao, Zongjin Ren, Zhenyuan Jia, Wei Liu (2013). A study on the dynamic six-component force measurement with wind loads. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
281. Zhenyuan Jia (2013). Research on Measure-redesign-machining Integration Manufacturing Method for Complicated Surface Parts with High Performance. Journal of Mechanical Engineering.DOI
282. 王邦国，贾振元，刘巍，刘双军，杜剑，贾兴华（2012）. 基于结构光的大锻件尺寸测量中光条纹中心线提取方法. 《大连理工大学学报》.
283. 王永青，刘海波，贾振元，陶冶（2012）. 基于活动标架理论的加工目标曲面再设计及刀位计算. 《机械工程学报》.
284. 高成秀，贾振元，卢晓红（2012）. 微铣加工关键技术研究现状与发展. 《组合机床与自动化加工技术》.
285. 刘巍，邹尚博，王一明，张玲王宣，贾振元（2012）. 深微孔电火花加工非电参数工艺规律研究. 《电加工与模具》.
286. Huifang Liu, Zhenyuan Jia, Fuji Wang, Fucai Zong (2012). Research on the constant output force control system for giant magnetostrictive actuator disturbed by external force. Mechatronics.DOI
287. Fuji Wang, Zhenyuan Jia, Wei Liu (2012). Study on characteristics of CU substrate giant magnetostrictive thin film based in the direction of hard magnetization axis. International Conference on Optoelectronics and Microelectronics.DOI
288. Wei Liu, Zhenyuan Jia, Fuji Wang, Xin Ma, Wenqiang Wang, Xinghua Jia, Di Song (2012). An improved online dimensional measurement method of large hot cylindrical forging. Measurement.DOI
289. Zhenyuan Jia (2012). Design and Realization of G-code Compiling for Micro-milling Machine NC System Based on PMAC. Modular Machine Tool & Automatic Manufacturing Technique.
290. Li Wei, Lingxuan Zhang, Wei Liu, Zhenyuan Jia, Anchao Li (2012). A new interpolation method of variable period and step size in micro-EDM milling based on square constraint. The International Journal of Advanced Manufacturing Technology.DOI
291. Yingjun Li, Guicong Wang, Jun Zhang, Zhenyuan Jia (2012). Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor for large-load robotic manipulator. Measurement.DOI
292. WEI LIU, XIUYAN ZHENG, Shuangjun Liu, Zhenyuan Jia (2012). A ROUGHNESS MEASUREMENT METHOD BASED ON GENETIC ALGORITHM AND NEURAL NETWORK FOR MICROHETEROGENEOUS SURFACE IN DEEP-HOLE PARTS. Journal of Circuits Systems and Computers.DOI
293. Lingxuan Zhang, Zhenyuan Jia, Wei Liu, Li Wei (2012). A study of electrode compensation model improvement in micro-electrical discharge machining milling based on large monolayer thickness. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
294. Zhenyuan Jia, Xiaohong Lu, Jiangyuan Yang, Defeng Jia (2011). Research on job-shop scheduling problem based on genetic algorithm. International Journal Of Production Research, Vol. 490, No. 12.DOI
295. 刘慧芳，贾振元，王福吉，葛春亚（2011）. 超磁致伸缩力传感器及其实验研究. 《大连理工大学学报》.
296. 王福吉，刘巍，贾振元，刘慧芳，赵显嵩（2011）. 超磁致伸缩薄膜悬臂梁静力学分析. 《大连理工大学学报》.
297. 王福吉，阳江源，贾振元，王威，卢晓红（2011）. 滚珠丝杠副非协调性接触特性研究. 《中国机械工程》.
298. 房庆华，张军，李映君，贾振元，钱敏（2011）. 轴用压电式六维大力值测力仪分载研究. 《仪器仪表学报》.DOI
299. 王林平，贾振元，王福吉，赵国凯（2011）. 综合作业调度问题基于可行域的遗传算法. 《大连理工大学学报》.
300. Fuji Wang, Zhenyuan Jia, Wei Liu, Huifang Liu, Xiansong Zhao (2011). Study of Giant Magnetostrictive Thin Films With Gas Sensitive Layer for Use as Gas Concentration Sensors. IEEE Sensors Journal.DOI
301. Lingxuan Zhang, Zhenyuan Jia, Wei Liu, Anchao Li (2011). A two-stage servo feed controller of micro-EDM based on interval type-2 fuzzy logic. The International Journal of Advanced Manufacturing Technology.DOI
302. Bo Wang, Wenlong Liu, Zhenyuan Jia, Xiao Hong Lu, Yi Sun (2011). Dimensional measurement of hot, large forgings with stereo vision structured light system. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
303. Huifang Liu, Zhenyuan Jia, Fuji Wang, Fucai Zong (2011). Study on the design method of giant magnetostrictive force sensor. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
304. Zhenyuan Jia, Xinyi Zheng, Fuji Wang, Wei Liu, Ming Zhou (2011). A progressive mapping method for classifying the discharging states in micro-electrical discharge machining. The International Journal of Advanced Manufacturing Technology.DOI
305. Jian-wei Ma, Fuji Wang, Zhenyuan Jia, Wei Liu (2011). Application of principal component analysis for mechanical coupling system modelling based on support vector machine. International Journal of Mechatronics and Automation.DOI
306. 贾振元，褚宏飞，刘巍，林盛，卢晓红（2010）. 基于Stewart结构六维大力传感器的性能分析及结构优化. 《仪器仪表学报》.DOI
307. 王永青，林盛，于雷，贾振元（2010）. 复合材料薄壁回转体零件锥度在机测量系统研究. 《大连理工大学学报》.
308. 贾振元，郑新毅，王福吉，刘巍（2010）. 微孔电火花加工极间工作液流动状态研究. 《大连理工大学学报》.
309. 王林平，贾振元，王福吉，孟凡斌（2010）. 含装配约束的作业调度问题及遗传解码算法. 《大连理工大学学报》.
310. 王福吉，贾振元，刘巍，赵建国（2010）. 具有气敏涂层的GMF静态磁机耦合模型及实验研究. 《大连理工大学学报》.
311. 林盛，刘巍，王永青，贾振元（2010）. 六维大力传感器测量原理研究. 《大连理工大学学报》.
312. 王福吉，赵国凯，贾振元，卢晓红，王林平（2010）. 基于可行域遗传算法的装配作业调度. 《计算机集成制造系统》.DOI
313. Zhenyuan Jia, Xiao-Hong Lu, Jiang-Yuan Yang (2010). Self-learning fuzzy control of scan tracking measurement in copying manufacture.DOI
314. Xiaohong Lü, Zhenyuan Jia, Fuji Wang (2010). Hardware circuit design of copying manufacturing oriented complete software type CNC system. International Conference on Computer Application and System Modeling.DOI
315. Zhenyuan Jia, Huifang Liu, Fuji Wang, Wei Liu, GE Chun-ya (2010). A novel magnetostrictive static force sensor based on the giant magnetostrictive material. Measurement.DOI
316. Wei Liu, Xiuyan Zheng, Xinghua Jia, Li Ping Fan, Shuangjun Liu, Zhenyuan Jia (2010). A measurement method for roughness of micro-heterogeneous surface in deep hole. International Conference on Intelligent Control and Information Processing.DOI
317. Wei Liu, Xinghua Jia, Fuji Wang, Zhenyuan Jia (2010). An in-pipe wireless swimming microrobot driven by giant magnetostrictive thin film. Sensors and Actuators A Physical.DOI
318. Zhenyuan Jia (2010). Characteristics Prediction Method of Electro-hydraulic Servo Valve Based on Rough Set and Adaptive Neuro-fuzzy Inference System. Chinese Journal of Mechanical Engineering.DOI
319. Wei Liu, Jian Ming Du, Bangguo Wang, Xinghua Jia, Shuangjun Liu, Zhenyuan Jia (2010). Field Calibration Method of Camera for Measuring the Dimensions of Large Forging. Lecture notes in computer science.DOI
320. Qiang Guo, Yuwen Sun, Feifei Xu, Zhenyuan Jia (2010). Prediction of Cutting Forces Integrated Run-Out Effect for Five-Axis Peripheral Milling with a Cylindrical Cutter. Lecture notes in computer science.DOI
321. Zhenyuan Jia (2010). Research on on-machine measurement system for taper of composite thin-walled revolution parts. Dalian Ligong Daxue xuebao.
322. Zhenyuan Jia (2010). Research on measuring principle of six-axis heavy force sensor. Dalian Ligong Daxue xuebao.
323. Zhenyuan Jia (2010). Experimental Study of Non-linear Vibration Characteristics of Bimorph Giant Magnetostrictive Thin Film Cantilever. New Technology & New Process.
324. Qin Xing, Jun Zhang, Min Qian, Zhenyuan Jia, Baoyuan Sun (2010). Design, calibration and error analysis of a piezoelectric thrust dynamometer for small thrust liquid pulsed rocket engines. Measurement.DOI
325. Zhenyuan Jia, Huifang Liu, Fuji Wang, GE Chun-ya (2010). Research on a novel force sensor based on giant magnetostrictive material and its model. Journal of Alloys and Compounds.DOI
326. Xiaohong Lu, Zhenyuan Jia, Fuji Wang (2010). Design and realization of complete software type copying manufacturing CNC system. International Conference on Computer Application and System Modeling.DOI
327. Wei Liu, Yingjun Li, Zhenyuan Jia, Jun Zhang, Min Qian (2010). Research on parallel load sharing principle of piezoelectric six-dimensional heavy force/torque sensor. Mechanical Systems and Signal Processing.DOI
328. Qin Xing, Jun Zhang, Min Qian, Zhenyuan Jia, Baoyuan Sun (2010). Thrust stand for low-thrust liquid pulsed rocket engines. Review of Scientific Instruments.DOI
329. Lingxuan Zhang, Zhenyuan Jia, Fuji Wang, Wei Liu (2010). A hybrid model using supporting vector machine and multi-objective genetic algorithm for processing parameters optimization in micro-EDM. The International Journal of Advanced Manufacturing Technology.DOI
330. 王林平，贾振元，王福吉，孟凡斌（2009）. 多产品综合作业调度问题及其求解. 《系统工程理论与实践》, No. 9.下载原文
331. 贾振元，卢晓红，王福吉，刘巍（2009）. 压磁式测力传感器线性度和灵敏度实验研究. 《仪表技术与传感器》.
332. 贾振元，卢晓红，王福吉，刘巍（2009）. 压磁式测力传感器重复特性实验. 《仪表技术与传感器》.
333. 贾振元，高升晖，王福吉，周明，刘巍（2009）. 电火花加工中电参数对放电状态影响规律及其建模. 《大连理工大学学报》.
334. Yingjun Li, Sun Bao-yuan, Jun Zhang, Min Qian, Zhenyuan Jia (2009). A novel parallel piezoelectric six-axis heavy force/torque sensor. Measurement.DOI
335. Yuwen Sun, Fei Yan Ren, Dongming Guo, Zhenyuan Jia (2009). Estimation and experimental validation of cutting forces in ball-end milling of sculptured surfaces. International Journal of Machine Tools and Manufacture.DOI
336. Xiaohong Lü, Zhenyuan Jia, Defeng Jia, Jiangyuan Yang (2009). Smoothing treatment and tool compensation of surface scan tracking measurement sampling data.DOI
337. Zhenyuan Jia, Huifang Liu, Fuji Wang (2009). Researches on the computer digital control system of giant magnetostrictive actuator. Mechatronics.DOI
338. Zhenyuan Jia, Lingxuan Zhang, Fuji Wang, Wei Liu (2009). A New Method for Discharge State Prediction of Micro-EDM Using Empirical Mode Decomposition. Journal of Manufacturing Science and Engineering.DOI
339. Zhenyuan Jia, Sheng Yao Lin, Wei Liu (2009). Measurement method of six-axis load sharing based on the Stewart platform. Measurement.DOI
340. Zhenyuan Jia, Bangguo Wang, Wei Liu, Yuwen Sun (2009). An improved image acquiring method for machine vision measurement of hot formed parts. Journal of Materials Processing Technology.DOI
341. Zhenyuan Jia, Xiaohong Lu, Fuji Wang, Wei Liu (2009). Research on the Key Technology of a Testing System of Piezomagnetic Force Transducer. Journal of Testing and Evaluation.DOI
342. Zhenyuan Jia, Jian-wei Ma, Fuji Wang, Wei Liu (2009). Characteristics forecasting of hydraulic valve based on grey correlation and ANFIS. Expert Systems with Applications.DOI
343. Yingjun Li, Jun Zhang, Zhenyuan Jia, Min Qian, Hanguang Li (2009). Research on force-sensing element's spatial arrangement of piezoelectric six-component force/torque sensor. Mechanical Systems and Signal Processing.DOI
344. Yuwen Sun, Jinting Xu, Dongming Guo, Zhenyuan Jia (2009). A unified localization approach for machining allowance optimization of complex curved surfaces. Precision Engineering.DOI
345. Yingjun Li, Jun Zhang, Zhenyuan Jia, Min Qian (2009). A novel piezoelectric 6-component heavy force/moment sensor for huge heavy-load manipulator's gripper. Mechanical Systems and Signal Processing.DOI
346. Lixin Cao, Zhenyuan Jia, Jian Liu (2009). Computation of medial axis and offset curves of curved boundaries in planar domains based on the Cesaro's approach. Computer Aided Geometric Design.DOI
347. 卢晓红，贾振元，刘弟新（2008）. 基于LP模式的车间内吊车调度系统研究. 《大连理工大学学报》.
348. 贾振元，王晓煜，王福吉（2008）. 超磁致伸缩执行器动力学模型及数值模拟. 《大连理工大学学报》.
349. 夏法锋，贾振元，吴蒙华，王帆，霍峰（2008）. 用人工神经网络优化Ni-纳米TiN复合镀层的超声-电沉积工艺. 《稀有金属材料与工程》.
350. Yingjun Li, Baoyuan Sun, Jun Zhang, Zhenyuan Jia, Min Qian (2008). Research on Piezoelectric Six-Dimensional Heavy Force Sensor with Four-Point Supporting Structure. Lecture notes in computer science.DOI
351. Xiaohong Lü, Zhenyuan Jia, Wei Liu, Fuji Wang (2008). Simulation study of multi-agent-based network manufacturing ASP system. IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI).DOI
352. Xiaohong Lü, Zhenyuan Jia, Fuji Wang, Wei Liu (2008). Key Technologies of ASP Based Collaborative Design. International Conference on Intelligent Computation Technology and Automation.DOI
353. Xiaohong Lu, Zhenyuan Jia, Fuji Wang, Wei Liu (2008). Queue Theory Based Algorithm for Material Lean Scheduling in Heavy Weight Parts Workshop. International Conference on Wireless Communications, Networking and Mobile Computing.DOI
354. Wei Liu, Zhenyuan Jia, Fuji Wang, Yongshun Zhang, Dongming Guo (2008). Geometrical nonlinear deformation model and its experimental study on bimorph giant magnetostrictive thin film. Frontiers of Mechanical Engineering in China.DOI
355. Linping Wang, Zhenyuan Jia, Fuji Wang (2008). Solving complete job shop scheduling problem using genetic algorithm. World Congress on Intelligent Control and Automation.DOI
356. Zhenyuan Jia (2008). Digital Measuring Technology on Complex Surface Hard Brittle Part. Manufacturing Technology & Machine Tool.
357. Sheng Yao Lin, Wei Liu, Yongqing Wang, Zhenyuan Jia, Fuji Wang (2008). A Novel Six-Axis Heavy Force Sensor. Lecture notes in computer science.DOI
358. Zhenyuan Jia (2008). Precision Grinding Parameters Optimization and Experimental Study of Rotary Part on High Speed Aircraft Based on GASA. Modular Machine Tool & Automatic Manufacturing Technique.
359. 王福吉，贾振元，赵建国，刘巍（2007）. 悬臂梁式超磁致伸缩薄膜驱动器动力学模型. 《2007年中国机械工程学会年会》.
360. 王永青，于雷，林盛，贾振元（2007）. 复合材料薄壁回转体零件锥度在机测量系统. 《2007年中国机械工程学会年会》.
361. 夏法锋，吴蒙华，贾振元，李智（2007）. 纳米TiN粒子在Ni-TiN复合镀层中的作用研究. 《金属热处理》.
362. 夏法锋，贾振元，吴蒙华，李智（2007）. 脉冲电沉积纳米Ni-TiN复合镀层. 《材料科学与工艺》.
363. 刘巍，张永顺，贾振元，王福吉，郭东明（2007）. GMF双层膜几何非线性变形模型及实验研究. 《大连理工大学学报》.
364. 王福吉，贾振元，王林平，刘巍（2007）. 车间作业排序的遗传算法解码方法研究. 《机械工程师》.
365. Xiaohong Lü, Zhenyuan Jia, Dixin Liu (2007). Modeling and Implementation of a Collaborative Design system Based on ASP Mod¿. IEEE International Conference on Automation and Logistics (ICAL).DOI
366. 江连会，贾振元，王东兴（2006）. 理想材料零件的数字喷射成形系统研究. 《大连理工大学学报》.
367. 卢晓红，贾振元，麻硕士，裴喜春（2006）. 虚拟数字信号处理仪的关键技术研究. 《仪器仪表学报》.
368. 徐道明，贾振元，郭东明（2006）. 理想材料零件实体模型自动添加支撑技术研究(英文). 《大连理工大学学报》.
369. 贾振元，卢晓红（2006）. 面向应用服务提供商服务的区域网络化制造系统. 《计算机集成制造系统》.
370. 张永顺，许良，张林燕，贾振元（2006）. 超磁致伸缩双面薄膜的动态驱动模型. 《哈尔滨工业大学学报》.
371. 卢晓红，麻硕士，贾振元（2006）. 虚拟波形发生器的研究与开发. 《仪器仪表学报》.DOI
372. Yuwen Sun, Zhenyuan Jia, Fei Yan Ren, Dongming Guo (2006). Adaptive feedrate scheduling for NC machining along curvilinear paths with improved kinematic and geometric properties. The International Journal of Advanced Manufacturing Technology.DOI
373. Yuwen Sun, Dongming Guo, Zhenyuan Jia (2006). Spiral cutting operation strategy for machining of sculptured surfaces by conformal map approach. Journal of Materials Processing Technology.DOI
374. Zhenyuan Jia, Wei Liu, Yongshun Zhang, Fuji Wang, Dongming Guo (2006). A nonlinear magnetomechanical coupling model of giant magnetostrictive thin films at low magnetic fields. Sensors and Actuators A Physical.DOI
375. Zhenyuan Jia, Xiaohong Lu, Dixin Liu (2006). The Research on Lean Rework and Balancing of the Cylinder Liner Production Line. World Congress on Intelligent Control and Automation.DOI
376. Zhenyuan Jia (2006). Biomimetic Swimming Micro Robot Driven by Giant Magnetostrictive Thin Films. Robot.
377. Zhenyuan Jia (2006). Dynamic drive model of double-faced giant magnetostrictive thin films. Ha'erbin gongye daxue xuebao.
378. Zhenyuan Jia (2006). BIOMIMETIC SWIMMING PRINCIPLE OF A MICRO ROBOT FISH USING GIANT MAGNETOSTMCTIVE THIN FILM AS CAUDAL FIN. Chinese Journal of Mechanical Engineering.
379. 季田，郭东明，贾振元，康仁科（2005）. 天线罩内廓曲面测量数据处理与重构研究. 《大连理工大学学报》.
380. 贾振元，张楠楠，王林平（2005）. 中小制造企业库存管理系统数据管理. 《智能制造》.
381. 贾振元，郭庭政，王林平（2005）. 面向中小制造企业多种BOM并行的构建和应用. 《智能制造》.
382. 于涛，贾振元，张桂荣，潘晓辉（2005）. 面向ASP模式的远程机械设计服务系统. 《制造业自动化》.
383. Dongxing Wang, Dongming Guo, Zhenyuan Jia, Hui-wen Leng (2005). Slicing of CAD models in color STL format. Computers in Industry.DOI
384. Dongxing Wang, Dongming Guo, Zhenyuan Jia, Jiang Lian-hui (2005). Thickening the colored regions in a color volume dataset. Computers & Graphics.DOI
385. Hao Ping, Dongming Guo, Renke Kang, Zhenyuan Jia (2005). A more general illumination model for surface reconstruction.DOI
386. Zhenyuan Jia (2005). Status and Prospects of Medical Micro Robots Driven by Exterior Magnetic Field. Robot.
387. 张生芳，郭东明，贾振元，康仁科，史爱峰（2004）. 天线罩制造中的电厚度测量技术. 《仪器仪表学报》.
388. 贾振元，王福吉，史纯，张永顺，郭丽莎（2004）. 超磁致伸缩微位移执行器控制系统研究. 《大连理工大学学报》.
389. Xing Yang, Zhenyuan Jia, Donguning Guo (2004). Study on giant magnetostrictive microdisplacement actuator having the function of sensing its displacement. World Congress on Intelligent Control and Automation.DOI
390. 贾振元，杨兴，郭东明，郭丽莎（2002）. 超磁致伸缩微位移执行器控制方法的研究. 《仪器仪表学报》.
391. 贾振元，宋莉，郭丽莎（2002）. 虚拟仪器的发展现状与特点. 《仪表技术》.
392. 郭东明，盛贤君，徐志祥，贾振元，王晓明（2002）. 导弹天线罩专用修磨机床控制系统研究. 《大连理工大学学报》.
393. 邹国林，郭东明，贾振元，刘顺福（2002）. 熔融沉积制造工艺参数的优化. 《大连理工大学学报》.
394. Zhenyuan Jia (2002). Research on Model of Extruding Filament and Compensation Method of Prototype Dimensions in FDM. Zhongguo jixie gongcheng.
395. 郭东明，贾振元，王晓明，康德纯，王立鼎，程耿东（2001）. 理想材料零件的数字化设计制造方法及内涵. 《机械工程学报》.
396. 白书清，李伯虎，谈凤奎，贾振元（2001）. 航天器现代集成制造系统研究. 《计算机集成制造系统》.
397. 贾振元，刘侃，刘顺福（2001）. 远程控制快速成型加工技术研究. 《大连理工大学学报》.
398. 杨兴，贾振元，郭东明，郭沛飞（2001）. 超磁致伸缩执行器驱动磁场理论分析与实验研究. 《大连理工大学学报》.
399. 高菲，贾振元，郭丽莎（2000）. 集成式相敏检波电路的研究. 《仪表技术》.
400. 郭东明，姚宝国，徐志祥，贾振元，王晓明（2000）. 天线罩几何参数测量控制系统研究. 《大连理工大学学报》.
401. 郭东明，王彤波，贾振元，赵福令（2000）. 电解珩磨加工电流控制技术及金属去除规律. 《大连理工大学学报》.
402. 姚宝国，徐志祥，王晓明，贾振元，郭东明（2000）. 天线罩几何参数测量仪软件系统研究. 《大连理工大学学报》.
403. 郭东明，王晓明，贾振元，徐志祥（2000）. 天线罩几何参数测量仪研究. 《机械工程学报》.
404. 贾振元，傅南红，王振国，郭丽莎（2000）. 凸轮轴变转速数控磨削方法的数学解析. 《大连理工大学学报》.
405. 郭东明，贾振元，赵福令，王彤波（1999）. 可控电解珩磨准稳态加工去除规律模型参数的确定. 《大连理工大学学报》.
406. 贾振元，卫国强，郭东明（1993）. 测头跟踪式大齿轮齿形误差在机测量系统的研究. 《大连理工大学学报》.
407. 郭东明，卫国强，贾振元（1993）. 可控电解珩磨加工机理及其电解液的加工特性. 《大连理工大学学报》.
408. 贾振元，卫国强（1992）. 大型齿轮齿距误差在机测量系统的研究. 《工具技术》.
409. 贾振元，卫国强，郭东明，刘欣，张元良（1992）. 测头控制跟踪驱动法在CNC齿轮测量仪中的应用. 《工具技术》.
410. 张元良，卫国强，刘欣，贾振元（1992）. 整数逼近循环比例驱动. 《工具技术》.
411. 刘欣，卫国强，张元良，贾振元，郭东明（1991）. 微型齿轮测量仪坐标法测量方案的探讨. 《工具技术》.
412. 郭东明，贾振元（1989）. 位移测量元件的微机精化补偿方法及其应用. 《大连理工大学学报》.

预印本

1. Yongquan Lin, Zhenyuan Jia, Rao Fu, Shiwei Zhang, Fuji Wang, Jun Jie Deng (2025). Double orientation integrated cutting tool wear for surface milling multi-directional CFRP with ball-end cutter. SSRN Electronic Journal.DOI
2. Jian-wei Ma, Hechen Sun, Hui-teng Yan, Hongyuan Zhang, Qiang Tao, Zhenyuan Jia, Wei Liu (2023). A machining partition method for local features with dimensional correlations of large cabin. Research Square.DOI