刘爱军｜合肥工业大学｜学者主页

2026

基于ProCAST的A356铝合金缸套金属型铸造工艺模拟与优化

樊雨成，杨维庆，王维一，杨中书，刘爱军

《金属加工(热加工)》

2026

基于混合式教学模式的金属熔焊实验教学改革研究

刘爱军，王岩，钟志宏，钟浪祥，舒霞

《中国现代教育装备》

2026

20CrNiMo钢渗碳齿轮不同应力比下弯曲疲劳性能研究

张瑞臣，冯显磊，刘爱军

《金属加工(热加工)》

2026

TC4钛合金细长轴超声振动车削力对比分析

刘爱军，邹书航，周知进

《制造技术与机床》

DOI

2026

金属陶瓷界面行为模拟计算研究进展

王旭，刘爱军，吴玉鹏，兰晏文，侯蓉，潘亚飞，党永丰

《粘接》

2026

基于PROS四维递进模式的实验教学设计与实践

黄露露，余翠平，张雪梅，钟浪祥，刘爱军，王岩

《实验科学与技术》

2026

The effect of activators on the microstructure and properties of 304 stainless steel TIG welds

Rui Tian, X F Wang, X F Wang, Aijun Liu

Journal of Physics Conference Series

DOI

2025

模具表面采用PVD制备多层硬化膜研究的进展

毛雨姗，刘宁，刘爱军

《热处理》

2024

四种典型球墨铸铁应变释放系数及其塑性修正研究

汪友路，钱冬冬，刘爱军，解明国，张学斌

《铸造》

2024

不同量Ta的添加对Ti(C,N)基金属陶瓷显微组织和力学性能的影响

陈浩，段平起，刘爱军，陈文琳，吴满意，刘宁

《热处理》

2024

冷轧和再结晶退火对Ta-2.5W合金组织和力学性能的影响

刘宁，徐潇敏，刘爱军，吴玉程

《材料热处理学报》

2023

一种中碳高强度合金钢的组织与性能研究

陶鹏，郑作福，陈谢军，刘爱军，刘宁

《热处理》

2023

一种中碳高强韧合金钢的组织与力学性能

陈谢军，刘宁，刘爱军，吴玉程

《材料热处理学报》

2023

Review of Green Supply-Chain Management Diffusion in the Context of Energy Transformation

Yan Xu, Aijun Liu, Zengxian Li, Jiaxin Li, Jiamin Xiong, Peng Fan

Energies

DOI

2023

Sustainability Assessment of Regional Transportation: An Innovative Fuzzy Group Decision-Making Model

Zengxian Li, Aijun Liu, Wen-Long Shang, Jiaxin Li, Hui-Yun Lu, H. Zhang

IEEE transactions on intelligent transportation systems (Print)

DOI

2022

单壁碳纳米管/7075铝合金复合材料的组织和力学性能研究

潘亚，刘宁，刘爱军，陈名海，徐文雷

《热加工工艺》

2022

Economic Boundary Analysis of Echelon Utilization of Retired Power Battery Considering Replacement Cost

Yali Wang, Ze Ye, Wen Wei, Y. Wu, Aijun Liu, Shuangfeng Dai

Frontiers in Energy Research

DOI

2022

Equilibrium Optimization with Multi-Energy-Efficiency-Grade Products: Government and Market Perspective

Qiuyun Zhu, Xiaoyang Zhou, Aijun Liu, C. Gao, Lei Xu, Fan Zhao, Ding Zhang, Benjamin Lev

Energies

DOI

2022

Pricing research for automotive supply chains considering low-carbon consumer preferences under a dual policy

Aijun Liu, Yun Yang, Jie Miao, Zengxian Li, Hui-Yun Lu, Feng Li

Kybernetes

DOI

2022

Green Product Pricing and Purchasing Strategies in a Two-Period Supply Chain considering Altruistic Preferences

Jie Miao, Aijun Liu, Zengxian Li, Shuailei Yuan

Discrete Dynamics in Nature and Society

DOI

2022

Supplier Evaluation Considering Green Production Based on Probabilistic Linguistic Information

Shuailei Yuan, Aijun Liu, Zengxian Li, Yun Yang, J. Liu, Yueh-chih Su

Energies

DOI

2022

A Combined Fuzzy Optimization Model for the Location of an Intelligent Energy-Efficient Manufacturing Industrial Park

Chufeng He, Aijun Liu, Lei Xu, Shuailei Yuan, Ming-Bao Cheng, Huan Wang, Fang Wang, Hui-Yun Lu, Xiaoxue Liu

Energies

DOI

2021

TiC含量对Ta-2.5W合金组织和力学性能的影响

刘宁，徐潇敏，刘爱军，吴玉程

《材料热处理学报》

DOI

2021

Improving bicycle sharing operations: A multi-criteria decision-making approach

Aijun Liu, Ruiyao Wang, J. Fowler, Xiaohui Ji

DOI

2020

CMT堆焊低合金钢的组织和性能及其冲击断裂行为

刘爱军，王国平，钟志宏，程继贵，刘宁

《焊接》

2020

四元高熵碳化物陶瓷的组织和性能研究

王达飞，刘宁，张晓玲，刘爱军

《热处理》

2020

热处理对含钪6061铝合金组织和力学性能的影响

刘宁，马力，刘爱军，张真，陈名海，吴玉程

《材料热处理学报》

DOI

2020

Research on the Intelligent Fault Diagnosis of Medical Devices Based on a DEMATEL-Fuzzy Concept Lattice

Xingru Guo, Aijun Liu, Xia Li, Yaxuan Xiao

International Journal of Fuzzy Systems

DOI

2020

Dual-Channel Global Closed-Loop Supply Chain Network Optimization Based on Random Demand and Recovery Rate

Aijun Liu, Yan Zhang, Senhao Luo, Jie Miao

International Journal of Environmental Research and Public Health

DOI

2020

A two-stage stochastic model for daily reserve in inventory management of Rh-negative red blood cells

Xingru Guo, Aijun Liu, Xia Li, Taoning Liu

Journal of Intelligent & Fuzzy Systems

DOI

2020

A supplier evaluation model based on customer demand in blockchain tracing anti-counterfeiting platform project management

Aijun Liu, Taoning Liu, Jian Mou, Ruiyao Wang

DOI

2019

中频感应淬火的S48C钢齿轮的弯曲疲劳性能研究

谢玲珍，王忠，冯显磊，张民，刘爱军，刘宁

《热处理》

2019

钽及钽合金的制备方法和力学性能研究

徐潇敏，刘宁，刘爱军，严骏

《热处理》

2019

不同材料不同工艺热处理的重载齿轮的弯曲疲劳性能研究

谢玲珍，王忠，冯显磊，张民，刘爱军，刘宁

《热处理》

2019

钢的热处理数值模拟技术的现状与发展

金妙，刘宁，刘爱军，李亨，李萌蘖

《热处理》

2019

浅议机体预埋钢管的铸造工艺设计及改进

刘爱军，张万钰

《中国铸造装备与技术》

2019

22CrMoH钢推土机齿轮弯曲疲劳寿命研究

董佳鸣，王忠，冯显磊，谢玲珍，张民，刘爱军，刘宁

《热处理》

2019

金属陶瓷颗粒尺寸与WC含量对双结构Ti(C,N)基金属陶瓷组织和性能的影响（英文）

刘爱军，刘宁

《稀有金属材料与工程》

2019

ZJH整铸机体工艺设计及其铸孔弯曲问题改进措施

刘爱军，姜周

《铸造技术》

DOI

2019

A fuzzy three-stage multi-attribute decision-making approach based on customer needs for sustainable supplier selection

Aijun Liu, Yaxuan Xiao, Hui-Yun Lu, Sang-Bing Tsai, Wei Song

DOI

2019

Research on the recycling of sharing bikes based on time dynamics series, individual regrets and group efficiency

Aijun Liu, Xiaohui Ji, Lei Xu, Hui-Yun Lu

Journal of Cleaner Production

DOI

2019

A GRA-Based Method for Evaluating Medical Service Quality

Aijun Liu, Xingru Guo, Taoning Liu, Yan Zhang, Sang-Bing Tsai, Qiuyun Zhu, Chao-Feng Hsu

IEEE Access

DOI

2019

The selection of 3PRLs on self-service mobile recycling machine: Interval-valued pythagorean hesitant fuzzy best-worst multi-criteria group decision-making

Aijun Liu, Xiaohui Ji, Hui-Yun Lu, Haiyang Liu

Journal of Cleaner Production

DOI

2019

A Consensus Model of Probabilistic Linguistic Preference Relations in Group Decision Making Based on Feedback Mechanism

Aijun Liu, H. Qiu, Hui-Yun Lu, Xingru Guo

IEEE Access

DOI

2019

Variance Risk Identification and Treatment of Clinical Pathway by Integrated Bayesian Network and Association Rules Mining

G. Du, Yinan Shi, Aijun Liu, Taoning Liu

Entropy

DOI

2019

The Evaluation Method of Low-Carbon Scenic Spots by Combining IBWM with B-DST and VIKOR in Fuzzy Environment

Aijun Liu, Taoning Liu, Xiaohui Ji, Hui-Yun Lu, Feng Li

International Journal of Environmental Research and Public Health

DOI

2019

An Innovative Model to Choose E-Commerce Suppliers

Aijun Liu, Yan Zhang, Hui-Yun Lu, Sang-Bing Tsai, Chao-Feng Hsu, Chien-Hung Lee

IEEE Access

DOI

2018

推土机齿轮弯曲疲劳试验机夹具的设计及热处理

王忠，冯显磊，谢玲珍，张民，刘爱军，刘宁

《热处理》

2018

不同材质的重载齿轮热处理后的疲劳性能研究

张民，王忠，冯显磊，谢玲珍，刘爱军，刘宁

《热处理》

2018

用作减摩添加剂的纳米六方氮化硼的研究进展

曹浩，刘宁，刘爱军

《热处理》

2018

放电等离子烧结的Ta-W合金的组织和性能研究

严骏，毕先磊，刘爱军，徐潇敏，刘宁，章桥新

《热处理》

2018

A novel method for determining the key customer requirements and innovation goals in customer collaborative product innovation

Fang Wang, Hua Li, Aijun Liu

Journal of Intelligent Manufacturing

DOI

2018

An empirical study of collaborative capacity evaluation and scheduling optimization for a CPD project

Xiao-Lei Wang, T. Ci, Sang-Bing Tsai, Aijun Liu, Quan Chen

PLoS ONE

DOI

2018

A Novel Approach Based on Kano Model, Interval 2-Tuple Linguistic Representation Model, and Prospect Theory for Apperceiving Key Customer Requirements

Aijun Liu, Qiuyun Zhu, Haiyang Liu, Hui-Yun Lu, Sang-Bing Tsai

Mathematical Problems in Engineering

DOI

2018

A Robust Predictive—Reactive Allocating Approach, Considering Random Design Change in Complex Product Design Processes

Jia-Fu Su, Meng Wei, Aijun Liu

International Journal of Computational Intelligence Systems

DOI

2018

Novel Method for Perceiving Key Requirements of Customer Collaboration Low-Carbon Product Design

Aijun Liu, Qiuyun Zhu, Xiaohui Ji, Hui-Yun Lu, Sang-Bing Tsai, Jiang-Tao Wang, Biru Liang

International Journal of Environmental Research and Public Health

DOI

2017

20CrMnTi钢齿轮疲劳寿命研究

张民，王忠，冯显磊，谢玲珍，刘爱军，刘宁

《热处理》

2017

40Cr钢汽车转向节锻造余热淬火的研究

朱腾，郑明玉，陈国强，廖辉，肖来斌，刘爱军，刘宁

《热处理》

2016

热加工对含钪6066铝合金组织和性能的影响

汤振齐，刘宁，陈天宝，刘爱军

《热处理》

2016

钪对6066铝合金组织和性能的影响及其时效工艺研究

汤振齐，刘宁，苏宇，刘爱军，陈天宝

《热处理》

2016

钨铌合金价电子结构参数统计值计算及性能研究

陈天宝，刘宁，刘爱军

《热处理》

2016

Collaborative Product Design for Tasks Sorting Based on Shortest Delivery

Xue-Dong Liang, Wenting Zhou, Aijun Liu, Hongmei Xue

Scientific Programming

DOI

2016

Impact of Personnel Flexibility on Job Shop Scheduling

Ren Lin, Guo-Hua Zhou, Aijun Liu, Hui-Yun Lu, Tonglei Li

Scientific Programming

DOI

2015

微量Sc对Al-Mg-Si-Cu合金组织和性能的影响

马力，刘宁，汤振齐，刘爱军，石俊，吴玉程

《热处理》

2015

热处理对DGJW20复合材料组织和性能的影响

李萍，刘宁，刘爱军，邓皇彬

《热处理》

2015

压制压力对纯钨显微组织和力学性能的影响

石俊，刘宁，刘爱军，苏宇，吴玉程，罗来马

《热处理》

2015

回火温度对YXR3模具钢组织和力学性能的影响

王前进，刘爱军，刘宁，周裕中，施卫兵，张俊

《热处理》

2015

YXR3钢模具早期失效分析

王前进，刘宁，刘爱军，叶德林，朱峰，施卫兵

《热处理》

2015

钨钼固溶体合金的价电子结构及其性能研究

苏宇，刘宁，汤振齐，刘爱军，陈天宝

《热处理》

2015

回火温度对电冶熔铸SiC-钢复合材料组织和性能的影响

刘爱军，刘宁，汪前进，李其龙

《热处理》

2015

Multi-objective dynamic fuzzy scheduling and its algorithm in product collaborative design considering emergency

Guo-Dong Yu, Yu Yang, Xi Zhao, Aijun Liu

Journal of Intelligent & Fuzzy Systems

DOI

2015

Joint optimization of complex product variant design responding to customer requirement changes

Guo-Dong Yu, Yu Yang, Aijun Liu

Journal of Intelligent & Fuzzy Systems

DOI

2014

回火对钢结硬质合金DGJW30组织和性能的影响

刘爱军，刘宁，张宏亮，陈新杰

《热处理》

2014

淬火温度对钢结硬质合金DGJW30组织和性能的影响

刘爱军，刘宁，陈新杰，张宏亮

《热处理》

2014

钼及钼合金研究的进展

石俊，刘宁，刘爱军，陈新杰，马力

《热处理》

2014

电冶熔铸WC钢结硬质合金断裂韧度研究

刘爱军，刘宁，陈新杰，马力，石俊

《热处理》

2014

浅议壁厚较大的柴油机试验台灰铁件的工艺设计与生产

王世明，刘爱军

《铸造设备与工艺》

2014

Task allocation optimization in collaborative customized product development based on double-population adaptive genetic algorithm

Beifang Bao, Yu Yang, Qian Chen, Aijun Liu, Jiali Zhao

Journal of Intelligent Manufacturing

DOI

2014

Selection Method of Customer Partners in Customer Collaborative Product Innovation

Fei Li, Yu Yang, Jianzhong Xie, Aijun Liu, Qian Chen

Journal of Intelligent Systems

DOI

2014

Task Allocation Optimization in Collaborative Customized Product Development Based on Adaptive Genetic Algorithm

Beifang Bao, Yu Yang, Aijun Liu, Jiali Zhao, Leiting Li

Journal of Intelligent Systems

DOI

2013

WC含量对Ti(C,N)基金属陶瓷抗热震性能的影响

张宏亮，刘宁，刘爱军，陈新杰

《热处理》

2013

电冶熔铸工艺制备的DGJW30复合材料的组织研究

李萍，刘爱军，刘宁，尤显卿

《热处理》

2012

渗硼对Ti(C,N)基金属陶瓷组织和性能的影响

詹斌，刘宁，李彬彬，刘爱军，唐慧兰

《材料热处理学报》

2012

16 PA6-280柴油机机架树脂砂铸造工艺及装备的研究

刘爱军

《大连交通大学》

2012

渗硼对Ti(C,N)基金属陶瓷抗热震性能的影响

詹斌，刘宁，李彬彬，唐慧兰，刘爱军

《热处理》

2012

Ni-Ti纤维的化学镀镍工艺研究

刘爱军，唐慧兰，李彬彬，詹斌，刘宁，赵永久

《热处理》

2012

TiC粉末粒度对Ti(C,N)基金属陶瓷组织及性能的影响

唐慧兰，刘宁，刘爱军，李彬彬，詹斌

《热处理》

2010

Fuzzy and Dynamic Flexible Job-Shop Scheduling with Multi-Object and Multi-Constraints

Aijun Liu, Yang Yu, Xue-Dong Liang, Yao Hao, Ming-Hua Zhu

DOI

2005

刹车毂裂纹产生原因分析及工艺改进

张子中，刘爱军，张昶

《金属热处理》

2003

火焰矫形对高速列车用铝合金焊接接头组织和性能的影响

姜澜，王炎金，刘爱军，魏绪钧

《材料热处理学报》

DOI

精选作品

期刊论文

基于ProCAST的A356铝合金缸套金属型铸造工艺模拟与优化

基于混合式教学模式的金属熔焊实验教学改革研究

20CrNiMo钢渗碳齿轮不同应力比下弯曲疲劳性能研究

TC4钛合金细长轴超声振动车削力对比分析

金属陶瓷界面行为模拟计算研究进展

基于PROS四维递进模式的实验教学设计与实践

The effect of activators on the microstructure and properties of 304 stainless steel TIG welds

模具表面采用PVD制备多层硬化膜研究的进展

四种典型球墨铸铁应变释放系数及其塑性修正研究

不同量Ta的添加对Ti(C,N)基金属陶瓷显微组织和力学性能的影响

冷轧和再结晶退火对Ta-2.5W合金组织和力学性能的影响

一种中碳高强度合金钢的组织与性能研究

一种中碳高强韧合金钢的组织与力学性能

Review of Green Supply-Chain Management Diffusion in the Context of Energy Transformation

Sustainability Assessment of Regional Transportation: An Innovative Fuzzy Group Decision-Making Model

单壁碳纳米管/7075铝合金复合材料的组织和力学性能研究

Economic Boundary Analysis of Echelon Utilization of Retired Power Battery Considering Replacement Cost

Equilibrium Optimization with Multi-Energy-Efficiency-Grade Products: Government and Market Perspective

Pricing research for automotive supply chains considering low-carbon consumer preferences under a dual policy

Green Product Pricing and Purchasing Strategies in a Two-Period Supply Chain considering Altruistic Preferences

Supplier Evaluation Considering Green Production Based on Probabilistic Linguistic Information

A Combined Fuzzy Optimization Model for the Location of an Intelligent Energy-Efficient Manufacturing Industrial Park

TiC含量对Ta-2.5W合金组织和力学性能的影响

Improving bicycle sharing operations: A multi-criteria decision-making approach

CMT堆焊低合金钢的组织和性能及其冲击断裂行为

四元高熵碳化物陶瓷的组织和性能研究

热处理对含钪6061铝合金组织和力学性能的影响

Research on the Intelligent Fault Diagnosis of Medical Devices Based on a DEMATEL-Fuzzy Concept Lattice

Dual-Channel Global Closed-Loop Supply Chain Network Optimization Based on Random Demand and Recovery Rate

A two-stage stochastic model for daily reserve in inventory management of Rh-negative red blood cells

A supplier evaluation model based on customer demand in blockchain tracing anti-counterfeiting platform project management

中频感应淬火的S48C钢齿轮的弯曲疲劳性能研究

钽及钽合金的制备方法和力学性能研究

不同材料不同工艺热处理的重载齿轮的弯曲疲劳性能研究

钢的热处理数值模拟技术的现状与发展

浅议机体预埋钢管的铸造工艺设计及改进

22CrMoH钢推土机齿轮弯曲疲劳寿命研究

金属陶瓷颗粒尺寸与WC含量对双结构Ti(C,N)基金属陶瓷组织和性能的影响（英文）

ZJH整铸机体工艺设计及其铸孔弯曲问题改进措施

A fuzzy three-stage multi-attribute decision-making approach based on customer needs for sustainable supplier selection

Research on the recycling of sharing bikes based on time dynamics series, individual regrets and group efficiency

A GRA-Based Method for Evaluating Medical Service Quality

The selection of 3PRLs on self-service mobile recycling machine: Interval-valued pythagorean hesitant fuzzy best-worst multi-criteria group decision-making

A Consensus Model of Probabilistic Linguistic Preference Relations in Group Decision Making Based on Feedback Mechanism

Variance Risk Identification and Treatment of Clinical Pathway by Integrated Bayesian Network and Association Rules Mining

The Evaluation Method of Low-Carbon Scenic Spots by Combining IBWM with B-DST and VIKOR in Fuzzy Environment

An Innovative Model to Choose E-Commerce Suppliers

推土机齿轮弯曲疲劳试验机夹具的设计及热处理

不同材质的重载齿轮热处理后的疲劳性能研究

用作减摩添加剂的纳米六方氮化硼的研究进展

放电等离子烧结的Ta-W合金的组织和性能研究

A novel method for determining the key customer requirements and innovation goals in customer collaborative product innovation

An empirical study of collaborative capacity evaluation and scheduling optimization for a CPD project

A Novel Approach Based on Kano Model, Interval 2-Tuple Linguistic Representation Model, and Prospect Theory for Apperceiving Key Customer Requirements

A Robust Predictive—Reactive Allocating Approach, Considering Random Design Change in Complex Product Design Processes

Novel Method for Perceiving Key Requirements of Customer Collaboration Low-Carbon Product Design

20CrMnTi钢齿轮疲劳寿命研究

40Cr钢汽车转向节锻造余热淬火的研究

热加工对含钪6066铝合金组织和性能的影响

钪对6066铝合金组织和性能的影响及其时效工艺研究

钨铌合金价电子结构参数统计值计算及性能研究

Collaborative Product Design for Tasks Sorting Based on Shortest Delivery

Impact of Personnel Flexibility on Job Shop Scheduling

微量Sc对Al-Mg-Si-Cu合金组织和性能的影响

热处理对DGJW20复合材料组织和性能的影响

压制压力对纯钨显微组织和力学性能的影响

回火温度对YXR3模具钢组织和力学性能的影响

YXR3钢模具早期失效分析

钨钼固溶体合金的价电子结构及其性能研究

回火温度对电冶熔铸SiC-钢复合材料组织和性能的影响

Multi-objective dynamic fuzzy scheduling and its algorithm in product collaborative design considering emergency

Joint optimization of complex product variant design responding to customer requirement changes

回火对钢结硬质合金DGJW30组织和性能的影响

淬火温度对钢结硬质合金DGJW30组织和性能的影响

钼及钼合金研究的进展

电冶熔铸WC钢结硬质合金断裂韧度研究

浅议壁厚较大的柴油机试验台灰铁件的工艺设计与生产

Task allocation optimization in collaborative customized product development based on double-population adaptive genetic algorithm