周小杰｜长沙理工大学｜学者主页

2026

基于改进重建网络的镁合金激光焊缝缺陷检测

唐昆，彭海滨，朱勇建，张航，曾钢，肖宏超，周小杰，唐伟东，张明军，毛聪

《中国机械工程》

2026

Tensile properties at various temperatures of the extruded and aged Mg-9Y-xZn alloys with or without the abnormal C texture component

Xiaojie Zhou, Yu Liu, Ming Li, Xian-zheng Lu, Xiaoming Chen, Yixuan Zhu, Gang Zeng, Ying-Chun Wan, Zhiman Chen, Jian Zhang

Journal of Alloys and Compounds

DOI

2026

Effect of Zn content on hot workability and hardness of Mg-9Y-xZn alloys

Jiaxin Deng, Xiaojie Zhou, Ruizhi Zhang, Lei Zhang, Yucai Zhang, Yue Wang, Zhuo Deng, Jiangjiang Li, Xian-zheng Lu

Journal of Materials Research and Technology

DOI

2026

Deformation behavior and corrosion resistance of bio-inspired porous Ti-6Al-4V implants fabricated by selective laser melting

Xian-zheng Lu, Zhi-Zhou Guo, Xiaojie Zhou, Jian Zhang, Xiaoming Chen, Xiao-Tong Pang, Yan Li, Chiping Lai, Luenchow Chan

Powder Technology

DOI

2026

Effects of Nd Content and Aging Treatment on Microstructure and Mechanical Properties of As-extruded Mg–9Gd–3Y–xNd–0.5Zr Alloys

Xianzheng Lu, Shenye He, Xiaolong Cui, Xiaojie Zhou, Jian Zhang, Xiaomin Chen, Ming Li, Yiran Cao, Chiping Lai, Luenchow Chan

Metals and Materials International

DOI

2026

Influence of deformation mechanisms in coarse and fine grains on the work hardening and fracture behavior of a bimodal-structured Mg-Gd-Y-Zn-Zr alloy

Ming Zhang Li, Xiaojie Zhou, Xu Wang, ShengXiong Tang, Yuanchun Huang, Yongcheng Lin, Jiang Zhang, Xianzheng Lu, Xiaomin Chen

Materials Characterization

DOI

2025

Fe/FeCo-MOF衍生改性碳材料对MgH2储氢性能的影响及机理

林凌峰，张健，李悦，周小杰，吉希希，卢先正，徐琦，李佳豪

《中国有色金属学报》

2025

基于主动半监督学习的镁合金激光焊接表面缺陷识别

唐昆，黄钊，朱勇建，张航，曾钢，肖宏超，周小杰，唐伟东，张明军，毛聪

《中国激光》

2025

挤压比对AZ42合金板材显微组织和力学性能的影响（英文）

肖淞珂，周小杰，曾钢，肖宏超，康心锴，卢先正，陈小敏，张健

Transactions of Nonferrous Metals Society of China

2025

Effect of process parameters on mechanical properties and corrosion resistance of Ti–6Al–4V alloys prepared by selective laser melting

Xian-zheng Lu, Wei Zou, Xiaojie Zhou, Jian Zhang, Xiaoming Chen, Xiao-Tong Pang, Wing-Yuk Ip, Chiping Lai, Luenchow Chan, Yi Wang

Journal of Materials Research and Technology

DOI

2025

Achievement of high strength Mg-9Al-0.9Ca alloys with moderate ductility by one-step extrusion after pre-deformation treatment

Lixin Wang, Weiying Huang, Xiaojie Zhou, Yonggang Tong, Qing-Hang Wang, Wei Chen, Li-Bo Zhou, Jian Chen, Zhen-Yu Xiao

Materials Today Communications

DOI

2024

Effect of Zn Content and Homogenization Treatment on Mechanical Properties and Corrosion Behavior of Mg-9Y-xZn Alloys

Rui-Zhi Zhang, Xiaojie Zhou, Ming Li, Xian-zheng Lu, Xiaoming Chen, Xiao-Tong Pang, Jiahao Li, Jian Zhang

Metals and Materials International

DOI

2024

Effect of rotational-die ECAP parameters on microstructure and mechanical properties of Mg97Y2Zn alloys

Xiaojie Zhou, Songke Xiao, Miao Li, Ya-Nan Wang, Xian-zheng Lu, Zijian Chen, Zihang Guo, Hong-Chao Xiao, Jing Guo

Journal of Materials Research and Technology

DOI

2024

The Effect of Extrusion Ratio on the Discharge and Corrosion Behavior of Mg-3Al-2.8Y-0.7Mn Alloy

Weiying Huang, Gen Liu, Pengfei Wu, Cong Li, Yan-Jie Ren, Jian Chen, Chuang Li, W. Qiu, Xiaojie Zhou, Yonggang Tong

Journal of materials engineering and performance (Print)

DOI

2024

Synergistic Improvement of Mechanical and Corrosion Properties of Mg-9.1Y-1.8Zn Alloys by Hot Extrusion

Xian-zheng Lu, Zijian Chen, X. Zou, Jian Zhang, Yu Tu, Xiaojie Zhou, Xiaoming Chen, Chiping Lai, Luenchow Chan, Gang Zeng

Metals and Materials International

DOI

2024

Effects of extrusion temperature on the microstructure and mechanical properties of low-alloyed Mg-Bi-Ca-Mn alloy

Weiying Huang, Yong-Heng Su, Kefu Gan, Jian Chen, Wei Qiu, Xiaojie Zhou, Qiang Yu, Liang Liang, Wei Chen, Li-Bo Zhou

Intermetallics (Barking)

DOI

2024

Effect of ECAP temperature and deformation route on mechanical properties of pre-extruded Mg-5Gd-3Y-1Zn-0.5Zr alloys

Xiaojie Zhou, H. Xia, Jian Zhang, Gang Zeng, Xian-zheng Lu, Xiaoming Chen, Xiao-Tong Pang, Jiahao Li, Jing Guo

Journal of Materials Science & Technology

DOI

2024

Experimental study of low–cycle fatigue behavior in a Mg–Y–Zn alloy with initial LPSO phase

Xiaomin Chen, Bi-Cheng Xiao, Y.C. Lin, Xiaojie Zhou

Materials Science and Engineering A

DOI

2023

Interaction of dynamic precipitation and dynamic recrystallization of a Mg-4Sn-3Al-1Zn alloy during hot compression

Wei Sun, Yangchao Deng, Hongyi Zhan, Xiaojie Zhou, Yuan Yao, Wenyuan Liu, G. Zeng

Journal of Alloys and Compounds

DOI

2023

Revealing the hot deformation behavior of AZ42 Mg alloy by using 3D hot processing map based on a novel NGO-ANN model

Mengtao Ning, Xiaoming Chen, Yong-Cheng Lin, Hong-Wei Hu, Xiaojie Zhou, Jian Zhang, Xian-zheng Lu, You Wu, Jian Chen, Qiang Shen

Journal of Materials Research and Technology

DOI

2023

Investigation on microstructural and microhardness evolution of GH4698 superalloy under transiently varying strain rates

Xiao-Min Chen, Mengtao Ning, Hongru Hu, Yong-Cheng Lin, Xiaojie Zhou, Jian Zhang, Xian-zheng Lu, You Wu

Materials Science & Engineering: A

DOI

2023

Tailoring microstructural evolution and fracture damage behavior of a Mg–Y–Zn alloy during hot tensile deformation

Xiaomin Chen, Yufeng Lu, Mengtao Ning, Xiaojie Zhou, Jian Chen

Materials Science and Engineering A

DOI

2023

Microstructure and mechanical properties of the Mg98.5Zn0.5RE1 (RE=Gd and/or Y) alloys processed by equal channel angular pressing

Xiaojie Zhou, Zihang Guo, Yu Tu, Yi Wang, Jian Zhang, Gang Zeng, Xianzheng Lu, Xiaomin Chen, Yaru Liu

Journal of Materials Research and Technology

DOI

2023

Microstructure and Mechanical Properties of Superlight Mg-10Li-3Al-3Zn Cabins Fabricated by Multi-directional Forging, Die Forging, and Annealing

Gang Zeng, Hairan Li, Chao Cao, Xiaojie Zhou, Xinkai Kang, Hongchao Xiao, Xianzheng Lu

Journal of Materials Engineering and Performance

DOI

2022

基于镍基固溶体催化的氢化镁储氢性能（英文）

张健，何柳，姚远，周小杰，蒋礼坤，彭平

Transactions of Nonferrous Metals Society of China

2022

Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y–1Zn-0.5Zr alloy

Xiaojie Zhou, Xiaodong Yang, Xianzheng Lu, Jian Zhang, Shilun Yu, Xiaomin Chen, Liwei Lu

Materials Science and Engineering A

DOI

2022

Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion

Xiaodong Yang, Xiaojie Zhou, Shilun Yu, Jian Zhang, Xianzheng Lu, Xiaomin Chen, Liwei Lu, Weiying Huang, Yaru Liu

Materials Science and Engineering A

DOI

2022

High strength-ductility synergy and low anisotropy of Mg-4.5Al-2.6Zn-0.3Mn alloy sheet achieved by annealing after rolling

Daibo Zhu, Qin Zeng, Chao Cao, Yang Liu, Xiaojie Zhou, Gang Zeng, Chenbo Li

Materials Letters

DOI

2022

Tunable mechanical and degradation properties of biodegradable Mg–Y–Zn alloys via Zn content regulation

Xianzheng Lu, Xianjun Zou, Xiaojie Zhou, Jian Zhang, Jian Zhang, Xiaomin Chen, Jiacheng Zhang, Jiacheng Zhang, Chiping Lai, Luenchow Chan, Taobo Hu

Journal of Materials Research and Technology

DOI

2022

Hot Compression Behavior and Workability of Mg-5Gd-3Y-2Zn-0.5Zr Alloy with Long-Period Stacking Ordered Phases

Xiaodong Yang, Baolong Liu, Xiaojie Zhou, Weiying Huang, Liwei Lu, Xianzheng Lu, Yaru Liu

Journal of Materials Engineering and Performance

DOI

2020

A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior

Xiaojie Zhou, Yuan Yao, Jian Zhang, Xiaomin Chen, Weiying Huang, Jing Pan, Haoran Wang, Maopeng Weng

Journal of Material Science and Technology

DOI

2020

Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy

Xiaojie Zhou, Wenying Xiong, Gang Zeng, Hongchao Xiao, Jian Zhang, Xianzheng Lu, Xiaomin Chen

Materials Science and Engineering A

DOI

2020

Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases

Xiaojie Zhou, Yuan Yao, Jian Zhang, Xianzheng Lu, Ke Wei Xu, Hang Liu, Zhuojun Wu

Materials Science and Engineering A

DOI

2020

Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation

Lei Liu, Xiaojie Zhou, Shilun Yu, Jian Zhang, Xianzheng Lu, Xin Shu, Zaijun Su

Journal of Magnesium and Alloys

DOI

2019

Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment

Xiaojie Zhou, Jian Zhang, Xiaomin Chen, Xu Zhang, Mengjia Li

Journal of Alloys and Compounds

DOI

2018

Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases

Xiaojie Zhou, Chuming Liu, Yonghao Gao, Shunong Jiang, Zhiyong Chen

Journal of Materials Engineering and Performance

DOI

2011

AZ31镁合金板材低温双向反复弯曲变形及退火过程的组织演化

张雷，杨续跃，霍庆欢，田放，张玉晶，周小杰，陈佳

《金属学报》

精选作品

期刊论文

基于改进重建网络的镁合金激光焊缝缺陷检测

Tensile properties at various temperatures of the extruded and aged Mg-9Y-xZn alloys with or without the abnormal C texture component

Effect of Zn content on hot workability and hardness of Mg-9Y-xZn alloys

Deformation behavior and corrosion resistance of bio-inspired porous Ti-6Al-4V implants fabricated by selective laser melting

Effects of Nd Content and Aging Treatment on Microstructure and Mechanical Properties of As-extruded Mg–9Gd–3Y–xNd–0.5Zr Alloys

Influence of deformation mechanisms in coarse and fine grains on the work hardening and fracture behavior of a bimodal-structured Mg-Gd-Y-Zn-Zr alloy

Fe/FeCo-MOF衍生改性碳材料对MgH2储氢性能的影响及机理

基于主动半监督学习的镁合金激光焊接表面缺陷识别

挤压比对AZ42合金板材显微组织和力学性能的影响（英文）

Effect of process parameters on mechanical properties and corrosion resistance of Ti–6Al–4V alloys prepared by selective laser melting

Achievement of high strength Mg-9Al-0.9Ca alloys with moderate ductility by one-step extrusion after pre-deformation treatment

Effect of Zn Content and Homogenization Treatment on Mechanical Properties and Corrosion Behavior of Mg-9Y-xZn Alloys

Effect of rotational-die ECAP parameters on microstructure and mechanical properties of Mg97Y2Zn alloys

The Effect of Extrusion Ratio on the Discharge and Corrosion Behavior of Mg-3Al-2.8Y-0.7Mn Alloy

Synergistic Improvement of Mechanical and Corrosion Properties of Mg-9.1Y-1.8Zn Alloys by Hot Extrusion

Effects of extrusion temperature on the microstructure and mechanical properties of low-alloyed Mg-Bi-Ca-Mn alloy

Effect of ECAP temperature and deformation route on mechanical properties of pre-extruded Mg-5Gd-3Y-1Zn-0.5Zr alloys

Experimental study of low–cycle fatigue behavior in a Mg–Y–Zn alloy with initial LPSO phase

Interaction of dynamic precipitation and dynamic recrystallization of a Mg-4Sn-3Al-1Zn alloy during hot compression

Revealing the hot deformation behavior of AZ42 Mg alloy by using 3D hot processing map based on a novel NGO-ANN model

Investigation on microstructural and microhardness evolution of GH4698 superalloy under transiently varying strain rates

Tailoring microstructural evolution and fracture damage behavior of a Mg–Y–Zn alloy during hot tensile deformation

Microstructure and mechanical properties of the Mg98.5Zn0.5RE1 (RE=Gd and/or Y) alloys processed by equal channel angular pressing

Microstructure and Mechanical Properties of Superlight Mg-10Li-3Al-3Zn Cabins Fabricated by Multi-directional Forging, Die Forging, and Annealing

基于镍基固溶体催化的氢化镁储氢性能（英文）

Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y–1Zn-0.5Zr alloy

Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion

High strength-ductility synergy and low anisotropy of Mg-4.5Al-2.6Zn-0.3Mn alloy sheet achieved by annealing after rolling

Tunable mechanical and degradation properties of biodegradable Mg–Y–Zn alloys via Zn content regulation

Hot Compression Behavior and Workability of Mg-5Gd-3Y-2Zn-0.5Zr Alloy with Long-Period Stacking Ordered Phases

A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior

Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy

Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases

Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation

Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment

Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases

AZ31镁合金板材低温双向反复弯曲变形及退火过程的组织演化

会议论文

时效对Mg-7Al-0.4Zn-0.2Re挤压棒材显微组织及力学性能的影响

预印本

A High-Strength Rare-Earth Free Mg–Bi-Based Alloy Via Low-Temperature Extrusion

研究方向