李嘉宁｜山东建筑大学｜学者主页

2026

Al/FRP共固化材料铣削与钻削对比试验研究

石文天，李嘉宁，马通，李杰，卢晓红，李建，杨益琳，王林

《机械工程学报》

2026

高温富水环境注浆材料优选及结石体力学性能时间效应试验研究

张纪云，李嘉宁，王树仁，余永强，范利丹，曹运兴，张新生，白二虎，郭聪，刘炳臣

《材料导报》

2026

多材料激光粉末床熔融增材制造与创新设计研究（特邀）

熊宇奇，熊玮，叶泽玖，Shamoon Al Islam，李嘉宁，陈维聪，刘志颖，陈乔雨，Thomas KVAN，韩光超，郝亮

《中国激光》

2026

光子晶体材料性能的演进:从结构色到多光学模态发光

王昌兴，岳艺凡，杜国立，宁雅云，谢岳池，李嘉宁，唐学瑾，杨森，卢学刚

《中国科学:物理学力学天文学》

2026

Laser Powder Bed Fusion of FCC–BCC Composite Lattice Porous Scaffolds: Synergistic Optimization of Residual Stress, Surface Quality, and Mechanical Properties

Haozhe Cheng, Shu-Bo Xu, Xinyi Zhang, Xue Yang, Hailong Ma, Renhui Liu, Jianing Li

Journal of materials engineering and performance (Print)

DOI

2026

Influence of Laser Powder Bed Fusion Parameters on Surface Characteristics and Mechanical Properties of 316L Porous Bone Scaffolds

Shu-Bo Xu, Yanrui Wang, Tianhua Li, Xinyi Zhang, Ying Zhao, Yue-Fei Pan, Jianing Li, Ai-Jun Tang

Advanced Engineering Materials

DOI

2025

纳米纤维素基底的Ti3C2TxMXene复合膜的性能优化

宁豪宇，向雯婷，李嘉宁，刘彩平，何坚

《功能材料》

2025

22CrMo齿轮钢连续冷却相变规律及其在热轧生产工艺中的应用

孙雪娇，路峰，方金林，董丙成，李嘉宁

《金属热处理》

DOI

2025

Experimental Study on Surface Integrity and Wear Resistance of 20CrNiMo Steel by Multi-pass Ultrasonic Surface Rolling Processing

Shu-Bo Xu, Li-Yun Li, Kangwei Sun, Renhui Liu, Shengliang Wang, Jianing Li, Weihai Zhang, Wenming Wang

Journal of materials engineering and performance (Print)

DOI

2025

Preparation of Negative Poisson's Ratio 316L Stainless Steel Porous Bone Scaffolds Based on Finite Element Analysis and 3D Printing Technology

Shu-Bo Xu, Xue Yang, Xin-Zhi Hu, Hailong Ma, Jianing Li, Guo-Cheng Ren

Materials Research

DOI

2025

Study on the Organizational Properties of High-Entropy Alloy Coatings Laser Clad on H13 Steel Surface

Shu-Bo Xu, Shengliang Wang, Yuan Fang, Wenlin Li, Hailong Ma, Yue-Fei Pan, Jianing Li, Wenming Wang

Journal of materials engineering and performance (Print)

DOI

2025

Study on the effect of ultrasonic rolling on the microstructure and fatigue properties of A03600 aluminum alloy

Renhui Liu, Shu-Bo Xu, Chen Xu, Kangwei Sun, Xiaoyu Ju, Xue Yang, Yue-Fei Pan, Jianing Li, Guo-Cheng Ren, Lindong Wang

Journal of Alloys and Compounds

DOI

2025

Parameters analysis and process optimization of shell precision thermoforming

Haozhe Cheng, Shu-Bo Xu, Kangwei Sun, Shengliang Wang, Yue-Fei Pan, Hailong Ma, Guo-Cheng Ren, Jianing Li, Zhongkui Zhao

International Journal for Simulation and Multidisciplinary Design Optimization

DOI

2025

Parametric modeling and simulation analysis of porous materials prepared by 3D printing technology

Tianhua Li, Hailong Ma, Shu-Bo Xu, Renhui Liu, Yue-Fei Pan, Guo-Cheng Ren, Jianing Li, Zhongkui Zhao

International Journal for Simulation and Multidisciplinary Design Optimization

DOI

2025

Effect of ni content on mechanical properties and corrosion resistance of WC-Co-Ni cemented carbides

Shu-Bo Xu, Hui Xue, Hailong Ma, Siyu Sun, Yue-Fei Pan, Jianing Li, Guo-Cheng Ren

Processing and Application of Ceramics

DOI

2024

FeCrAl铁素体不锈钢高温氧化行为

邱国兴，李嘉宁，李琦，白冲，杨永坤，李小明

《金属功能材料》

2024

Surface Properties and Fatigue Behavior of 6061 Aluminum Alloy by Multi-pass Ultrasonic Surface Rolling Process

Xiquan Ma, Ruilan Gao, Shu-Bo Xu, Kangwei Sun, Xin-Zhi Hu, Meng Wang, Jianing Li

Journal of materials engineering and performance (Print)

DOI

2024

Effect of Multi-pass Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of GCr15 Steel

Xiquan Ma, Shu-Bo Xu, Xianmeng Xue, Xianhua Zhao, Yue-Fei Pan, Jianing Li, Wei Zheng

Journal of materials engineering and performance (Print)

DOI

2024

Dependences of the defect, microstructure and properties of 15-5PH martensitic stainless steel on the laser powder bed fusion process parameters

Bin Chen, Jianing Li, Zheng-Hua Huang, Binbin Zhao, Feng Chen, Zhi-Qiao Yan, Jian-Ye Liu, Wenjun Qi, Liu-Hui Niu

Materials Science & Engineering: A

DOI

2024

Design, analysis and optimization of porous titanium alloys scaffolds by using additive manufacture

Xue Yang, Xiujuan Song, Guoliang Zhang, Shu-Bo Xu, Wenming Wang, Kangwei Sun, Xiquan Ma, Siyu Sun, Yue-Fei Pan, Jianing Li, Guo-Cheng Ren, Weihai Zhang

International Journal for Simulation and Multidisciplinary Design Optimization

DOI

2024

Heat Treatment-Induced Microstructural Transformations and Strengthening Mechanisms in Laser Powder Bed Fusioned 15-5PH Stainless Steel

Bin Chen, Zhenghua Huang, Bo Li, Jianing Li, Jian-Ye Liu, Liu-Hui Niu

Journal of Materials Research and Technology

DOI

2024

Effect of Heat Treatment Cooling Method on the Organization and Properties of 316L Negative Re-entrant Hexagonal Honeycomb Porous Bone Scaffolds by Selective Laser Melting

Xin-Zhi Hu, Shu-Bo Xu, Xiquan Ma, Guo-Cheng Ren, Jianing Li

Journal of materials engineering and performance (Print)

DOI

2024

Effects of Heat Treatment on the Mechanical and Corrosion Resistance Properties of 316L NRHH Porous Bone Scaffolds by Selective Laser Melting

Xin-Zhi Hu, Shu-Bo Xu, Xiaoyu Ju, Xiquan Ma, Jianing Li, Guo-Cheng Ren

Metallurgical and Materials Transactions. A

DOI

2024

Modelling analysis and optimisation of porous structural scaffolds for human bones

Hui Xue, Xiujuan Song, Guoliang Zhang, Shu-Bo Xu, Weihai Zhang, Siyu Sun, Yue-Fei Pan, Jianing Li, Guo-Cheng Ren

International Journal for Simulation and Multidisciplinary Design Optimization

DOI

2024

Optimization of ZL104 Properties and Microstructure Study After Ultrasonic Rolling

Renhui Liu, Shu-Bo Xu, Kangwei Sun, Xiaoyu Ju, Weihai Zhang, Xue Yang, Yue-Fei Pan, Jianing Li, Guo-Cheng Ren

Materials Research

DOI

2024

Effect of Ultrasonic Surface Rolling on the Microstructure and Corrosion Properties of Gear Steel 20CrNiMo After Carburizing

Kangwei Sun, Shu-Bo Xu, Xiquan Ma, Renhui Liu, Xiaoyu Ju, Jianing Li, Yue-Fei Pan, Wenming Wang

Journal of materials engineering and performance (Print)

DOI

2024

Effects of Process Parameters on the Microstructure and Properties of Selective Laser Melting 316L Negative Re-entrant Hexagonal Honeycomb Porous Bone Scaffolds

Xin-Zhi Hu, Shu-Bo Xu, Xiquan Ma, Guo-Cheng Ren, Jianing Li, Li-Li Huang, Wei Zheng

Journal of materials engineering and performance (Print)

DOI

2023

激光精密制造先进多物相化复合材料研究及应用

李嘉宁，徐连勇，张曌

《中国铸造装备与技术》

2023

Finite Element Analysis and Surface Performance Study of High-Speed Precision Bearing Ultrasonic Surface Rolling Processing

Xianmeng Xue, Shu-Bo Xu, Yue-Fei Pan, Wei Zheng, Juan Han, Jianing Li

Journal of materials engineering and performance (Print)

DOI

2023

Effect of Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of 6061 Aluminum Alloy

Xiquan Ma, Weihai Zhang, Shu-Bo Xu, Kangwei Sun, Xin-Zhi Hu, Guo-Cheng Ren, Jianing Li, Xianhua Zhao, Fei Gao

Materials Research

DOI

2022

The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy

Zhi-Yun Ye, Cuiqin Li, Zheng Huang, Hao Luo, Feng Chen, Zhi-Qiao Yan, Jianing Li, Chun-Jie Xu, Zhong-Min Zhang

Journal of Materials Science

DOI

2022

Mechanism Study of the Effect of Selective Laser Melting Energy Density on the Microstructure and Properties of Formed Renewable Porous Bone Scaffolds

Sen Zhang, Shubo Xu, Yue-Fei Pan, Jianing Li, Ting-Ting Li

Metals

DOI

2022

Optimization of Structural and Processing Parameters for Selective Laser Melting of Porous 316L Bone Scaffolds

Shubo Xu, Sen Zhang, Guocheng Ren, Yue-Fei Pan, Jianing Li

Materials

DOI

2021

HS-SPME and GC-MS for the analysis of odorous constituents from heat-treated rubberwood and the chemical change of heat-treated rubberwood by XPS analysis

Tongtong Li, Guanjun Li, Jianing Li, Xiaowen Li, Min Li, Yachao Li

Wood Science And Technology，Vol. 550, No. 2

DOI

2021

氢气热处理诱导Ti3C2TxMXene的结构及特征元素演变行为研究

徐仕翀，李嘉宁，刘润，刘诗语，耿悦，王艺璇，刘淼，鲁铭

《吉林师范大学学报(自然科学版)》

DOI

2020

Characterization of the effluents condensated by volatile organic compounds during heat-treated rubberwood process

Tongtong Li, Guanjun Li, Jianing Li, Xiaowen Li, Quanji Lu, Min Li

Journal Of Wood Science，Vol. 66, No. 1

DOI

2020

激光及电弧增材制造技术研究进展

张丽炜，李嘉宁，刘立强，王晓临

《山东建筑大学学报》

2020

Influence of Interfacial Inter-metallic Compounds on the Electrical Characterization of Cu/Al Joints Produced by Flash Welding and Diffusion Brazing

Xue-Gang Wang, D.-Z. Xing, Jianing Li, Xin-geng Li

Materials Research

DOI

2019

复合材料激光增材制造技术及应用

李嘉宁

《化学工业出版社》

2019

Co50Fe50/Al2O3纳米复合材料结构的穆斯堡尔谱学研究

徐仕翀，王明水，谢艾玲，李嘉宁，党子佳，刘佳琪，党俊峰

《吉林师范大学学报(自然科学版)》

DOI

2014

Cu对TA15-2钛合金表面Stellite 12基激光合金化涂层组织结构及耐磨性的影响

李嘉宁，巩水利，王娟，单飞虎，李怀学，吴冰

《金属学报》

2013

非晶-纳米晶增强激光涂层的物理与表面性能(英文)

巩水利，李嘉宁

《稀有金属材料与工程》

2013

激光熔覆Fe3Al基复合涂层对纯Ti的表面强化（英文）

李嘉宁，巩水利，代建辉，李怀学，锁红波，蒋帅，丁立，李大成

《稀有金属材料与工程》

精选作品

期刊论文

Al/FRP共固化材料铣削与钻削对比试验研究

高温富水环境注浆材料优选及结石体力学性能时间效应试验研究

多材料激光粉末床熔融增材制造与创新设计研究（特邀）

光子晶体材料性能的演进:从结构色到多光学模态发光

Laser Powder Bed Fusion of FCC–BCC Composite Lattice Porous Scaffolds: Synergistic Optimization of Residual Stress, Surface Quality, and Mechanical Properties

Influence of Laser Powder Bed Fusion Parameters on Surface Characteristics and Mechanical Properties of 316L Porous Bone Scaffolds

纳米纤维素基底的Ti3C2TxMXene复合膜的性能优化

22CrMo齿轮钢连续冷却相变规律及其在热轧生产工艺中的应用

Experimental Study on Surface Integrity and Wear Resistance of 20CrNiMo Steel by Multi-pass Ultrasonic Surface Rolling Processing

Preparation of Negative Poisson's Ratio 316L Stainless Steel Porous Bone Scaffolds Based on Finite Element Analysis and 3D Printing Technology

Study on the Organizational Properties of High-Entropy Alloy Coatings Laser Clad on H13 Steel Surface

Study on the effect of ultrasonic rolling on the microstructure and fatigue properties of A03600 aluminum alloy

Parameters analysis and process optimization of shell precision thermoforming

Parametric modeling and simulation analysis of porous materials prepared by 3D printing technology

Effect of ni content on mechanical properties and corrosion resistance of WC-Co-Ni cemented carbides

FeCrAl铁素体不锈钢高温氧化行为

Surface Properties and Fatigue Behavior of 6061 Aluminum Alloy by Multi-pass Ultrasonic Surface Rolling Process

Effect of Multi-pass Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of GCr15 Steel

Dependences of the defect, microstructure and properties of 15-5PH martensitic stainless steel on the laser powder bed fusion process parameters

Design, analysis and optimization of porous titanium alloys scaffolds by using additive manufacture

Heat Treatment-Induced Microstructural Transformations and Strengthening Mechanisms in Laser Powder Bed Fusioned 15-5PH Stainless Steel

Effect of Heat Treatment Cooling Method on the Organization and Properties of 316L Negative Re-entrant Hexagonal Honeycomb Porous Bone Scaffolds by Selective Laser Melting

Effects of Heat Treatment on the Mechanical and Corrosion Resistance Properties of 316L NRHH Porous Bone Scaffolds by Selective Laser Melting

Modelling analysis and optimisation of porous structural scaffolds for human bones

Optimization of ZL104 Properties and Microstructure Study After Ultrasonic Rolling

Effect of Ultrasonic Surface Rolling on the Microstructure and Corrosion Properties of Gear Steel 20CrNiMo After Carburizing

Effects of Process Parameters on the Microstructure and Properties of Selective Laser Melting 316L Negative Re-entrant Hexagonal Honeycomb Porous Bone Scaffolds

激光精密制造先进多物相化复合材料研究及应用

Finite Element Analysis and Surface Performance Study of High-Speed Precision Bearing Ultrasonic Surface Rolling Processing

Effect of Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of 6061 Aluminum Alloy

The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy

Mechanism Study of the Effect of Selective Laser Melting Energy Density on the Microstructure and Properties of Formed Renewable Porous Bone Scaffolds

Optimization of Structural and Processing Parameters for Selective Laser Melting of Porous 316L Bone Scaffolds

HS-SPME and GC-MS for the analysis of odorous constituents from heat-treated rubberwood and the chemical change of heat-treated rubberwood by XPS analysis

氢气热处理诱导Ti3C2TxMXene的结构及特征元素演变行为研究

Characterization of the effluents condensated by volatile organic compounds during heat-treated rubberwood process

激光及电弧增材制造技术研究进展

Influence of Interfacial Inter-metallic Compounds on the Electrical Characterization of Cu/Al Joints Produced by Flash Welding and Diffusion Brazing

复合材料激光增材制造技术及应用

Co50Fe50/Al2O3纳米复合材料结构的穆斯堡尔谱学研究

Cu对TA15-2钛合金表面Stellite 12基激光合金化涂层组织结构及耐磨性的影响

非晶-纳米晶增强激光涂层的物理与表面性能(英文)

激光熔覆Fe3Al基复合涂层对纯Ti的表面强化（英文）