Gui-Rong Yang, Wen-Ming Song, Zhaoxia Pan, Ying Ma, Yuan Hao (2022). The Initial Corrosion Behavior of 20# Steel under the CO2/Aqueous Solution Gas–Liquid Two-Phase Bubble Flow Condition. Coatings.DOI
郝远（2021）. 科技期刊应注意正确使用“黏”“粘”. 《编辑学报》.
郝远（2021）. 与编辑出版学研究有关的基金项目有哪些? 《编辑学报》.
Teng-Da Di, Xinyi Liang, F. Niu, Chen-Chen Song, Da-Fan Shu, Yuan Hao, G. Ma, Dong-Jiang Wu (2021). Microstructure and properties of FeCoNiCrAl high-entropy alloy coating by directed laser deposition. International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).DOI
Gui-Rong Yang, Zhaoxia Pan, Zheng Zhang, Wen-Ming Song, Ying Ma, Yuan Hao (2021). Mesoscopic transformation at initial corrosion stage of 20# steel in aqueous solution under gas–liquid two-phase stratified flow condition.DOI
Zhen Li, Zhang-Zhi Shi, Yuan Hao, Hua-Fang Li, Hai-Jun Zhang, Xue-Feng Liu, Lu-Ning Wang (2020). Insight into role and mechanism of Li on the key aspects of biodegradable ZnLi alloys: Microstructure evolution, mechanical properties, corrosion behavior and cytotoxicity. Materials Science and Engineering C: Materials for Biological Applications.DOI
Gui-Rong Yang, Wen-Ming Song, Zi-Bo Zhu, Ying Ma, Yuan Hao (2020). Effect of liquid flow velocity on corrosion behavior of 20# steel at initial stage under gas-liquid two-phase plug flow condition.DOI
郝远（2019）. 具体物质的符号及其状态可用作量符号的下标吗? 《编辑学报》.
郝远（2019）. 不执行推荐性标准的后果很严重. 《编辑学报》.
郝远（2019）. 用“～”连接的数值范围一定要从小到大吗? 《编辑学报》.
郝远（2019）. “36 g/100 g H2O”的表示是错误的. 《编辑学报》.
郝远（2019）. 怎样著录采用著者-出版年制的电子资源中的“出版年”? 《编辑学报》.
郝远（2019）. 正确使用二进制倍数词头. 《编辑学报》.
郝远（2019）. 期刊析出文章作参考文献的转页码需要著录吗? 《编辑学报》.
郝远 (2019). 4 ft 8.5 in≠4.85 ft. 《编辑学报》.
Gui-Rong Yang, Wen-Ming Song, Fu-Qiang Wang, Ying Ma, Yuan Hao (2019). Corrosion behavior of 20# steel in aqueous CO2 solution under stratified gas-liquid two-phase flow condition. Anti-Corrosion Methods and Materials.DOI
Yu-Xia Yin, Chao-gang Zhou, Yan-Ping Shi, Zhang-Zhi Shi, Tian-Heng Lu, Yuan Hao, Cheng-Hu Liu, Xin Wang, Hai-Jun Zhang, Lu-Ning Wang (2019). Hemocompatibility of biodegradable Zn-0.8 wt% (Cu, Mn, Li) alloys. Materials Science and Engineering C: Materials for Biological Applications.DOI
Zhen Li, Zhang-Zhi Shi, Yuan Hao, Hua-Fang Li, Xue-Feng Liu, Alex A. Volinsky, Hai-Jun Zhang, Lu-Ning Wang (2019). High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents. Journal of Materials Science & Technology.DOI
Gui-Rong Yang, Wen-Ming Song, Fu-Qiang Wang, Ying Ma, Yuan Hao (2018). The corrosion behavior in CO2 medium of 20# steel under the (CO2/aqueous solution) gas-liquid two-phase stratified flow condition. Materials Research Express.DOI
Gui-Rong Yang, Wen-Ming Song, Jian Li, Fu-Qiang Wang, Ying Ma, Yuan Hao (2018). The microstructure and three-point bending behavior of Ni–Co/WC composite cladding coating.DOI
Wen-Ming Song, Gui-Rong Yang, Bing-Bing Liao, Jian Li, Ying Ma, Yuan Hao (2018). Effect of Cl− Concentration on the Corrosion Behavior of 16Mn Steel in Saturated H2S/CO2 Solution. Journal of Wuhan University of Technology-Mater. Sci. Ed..DOI
Xiao-feng Huang, Yu Zhang, Feng-Bin Guo, Jian-chang Yang, Ying Ma, Yuan Hao (2018). Effects of heat treatment on microstructure and mechanical properties of Mg-6Zn-4Sm-0.4Zr alloy. China Foundry.DOI
Yu Zhang, Xiao-feng Huang, Zhen-Duo Ma, Ya Li, Feng-Bin Guo, Jian-chang Yang, Ying Ma, Yuan Hao（2017）. 鋳放しMg‐6Znマグネシウム合金のミクロ組織と機械的性質に及ぼすAl含有量の影響【Powered by NICT】.
Yu Zhang, Xiao-feng Huang, Ya Li, Zhenduo Ma, Ma Ying, Yuan Hao (2017). Effects of samarium addition on as-cast microstructure, grain refinement and mechanical properties of Mg-6Zn-0.4Zr magnesium alloy.DOI
Yu Zhang, Xiao-feng Huang, Ying Ma, Ti-Jun Chen, Yuan Hao (2017). Effects of Sm addition on microstructural evolution of Mg-6Zn-0.4Zr alloy during semi-solid isothermal heat treatment. China Foundry.DOI
Yu Zhang, Xiao-feng Huang, Ying Ma, Ti-Jun Chen, Yuan-Dong Li, Yuan Hao (2017). Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy. China Foundry.DOI
Yu Zhang, Xiao-feng Huang, Zhenduo Ma, Ya Li, Feng-Bin Guo, Jian-chang Yang, Ying Ma, Yuan Hao (2017). The influences of Al content on the microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloys.DOI
Hai-Rong Dong, Ying Ma, Sheng Wang, Xiao-Xi Zhao, Huixia Guo, Yuan Hao (2017). Effect of Growth Rate on Microstructure and Corrosion Resistance of Micro-arc Oxidation Coatings on Magnesium Alloy.DOI
Xiao-Mei Luo, Guang-Li Bi, Jing Jiang, Ming Li, Rongguang Li, Yuan-Dong Li, Ma Ying, Yuan Hao (2016). Compressive anisotropy of extruded Mg–Dy–Zn alloy sheet.DOI
Guang-Li Bi, Jing Jiang, Fan Zhang, Da-Qing Fang, Yuan-Dong Li, Ma Ying, Yuan Hao (2016). Microstructure evolution and corrosion properties of Mg-Dy-Zn alloy during cooling after solution treatment.DOI
Pu-Bo Li, Ti-Jun Chen, Ying Ma, Yuan Hao, Ren-Guo Guan (2016). Microstructural Evolution during Partial Remelting of a 2024 Aluminum Alloy Prepared by Cold Pressing Ball-Milled Alloy Powders.DOI
Ti Chen, Da-Hao Zhang, W. Wang, Ying Ma, Yuan Hao (2016). Effects of Nd or Zr Addition on Microstructure and Mechanical Properties of As-Cast Mg-Zn-Y Alloy.DOI
Gui-Rong Yang, Chao-Peng Huang, Wen-Ming Song, Jian Li, Jin-jun Lu, Ying Ma, Yuan Hao (2016). Microstructure characteristics of Ni/WC composite cladding coatings. International Journal of Minerals, Metallurgy, and Materials.DOI
Ti-Jun Chen, Da-Hao Zhang, W. Wang, Ying Ma, Yuan Hao (2015). Effects of Sn and Ca on the microstructure and mechanical properties of Mg–Zn–Y–Nd–Zr alloys.DOI
Gui-Rong Yang, Chao-Peng Huang, Wen-Ming Song, Ying Ma, Yuan Hao (2015). The Effect of Graphite Content on the Wear Behavior of Ni/WC/G Composite Coating.DOI
Guang-Li Bi, Yuan-Dong Li, Xiao-feng Huang, Ti-Jun Chen, J. Lian, Zhong-Hao Jiang, Ying Ma, Yuan Hao (2015). Deformation behavior of an extruded Mg–Dy–Zn alloy with long period stacking ordered phase.DOI
Guang-Li Bi, Yuan-Dong Li, Xiao-feng Huang, Ti-Jun Chen, Ying Ma, Yuan Hao (2015). Dry sliding wear behavior of an extruded Mg–Dy–Zn alloy with long period stacking ordered phase.DOI
Ti-Jun Chen, Hui Guo, Ying Ma, Yuan Hao (2015). Effects of Reheating Temperature and Time on the Microstructure and Mechanical Properties of Thixoforged ZW21 Alloy.DOI
Ti-Jun Chen, X. Li, Haibin Guo, Yuan Hao (2015). Microstructure and crystal growth direction of Al–Cu alloy.DOI
邢博，郝远，李元东，马颖，陈体军（2013）. 自孕育法制备AZ31镁合金半固态流变成形组织(英文). Transactions of Nonferrous Metals Society of China.
Wen-Ming Song, Gui-Rong Yang, Yuan Hao, Yu-Fu Zhang (2013). The Corrosion Failure Analysis of Plate Pipe for Plate Heat Exchanger.DOI
Gui-Rong Yang, Wen-Ming Song, Ying Ma, Yuan Hao (2013). The Effect of Heat Treatment on Microstructure and Performance of Die Forging Copper.DOI
Su-Qing Zhang, Ti-Jun Chen, Ying Ma, Yuan-Dong Li, Yuan Hao (2013). Formation and Evolution of Liquid Pools Entrapped within Primary Particles of In Situ Mg2Si/AM60B Composite with Fine-Grains during Partial Remelting.DOI
Kai Feng, Xiao-feng Huang, Ying Ma, Ti-Jun Chen, Yuan Hao (2013). Microstructure evolution of ZA72 magnesium alloy during partial remelting.
B. Xing, Yuan Hao, Yuan-Dong Li, Ying Ma, Ti-Jun Chen (2013). Microstructure control of AZ31 alloy by self-inoculation method for semisolid rheocasting.DOI
Yu-Fu Zhang, Ying Ma, Yuan Hao, Hui Guo, Wen-Ming Song (2013). The Corrosion Behavior of 07/09Cr2AlMoRE Used for Petro-Chemical Equipment.DOI
Hao Yuan (2013). Non-dendritic microstructure evolution process and mechanism of ZA74 magnesium alloy. The Chinese Journal of Nonferrous Metals.
Kai Feng, Yuan Hao, Feng-Yun Yan, Ying Ma, Xiao-feng Huang (2012). Sm, Nd and Y composite enhanced magnesium alloy and fusion casting process of Sm, Nd and Y composite enhanced magnesium alloy.
Huixia Guo, Ying Ma, Jing-Song Wang, Yu-Shun Wang, Hai-Rong Dong, Yuan Hao (2012). Corrosion behavior of micro-arc oxidation coating on AZ91D magnesium alloy in NaCl solutions with different concentrations.DOI
B. Xing, Y.-D. Li, Ying Ma, T.-J. Chen, Yuan Hao (2012). Preparation of non-dendritic microstructure of AM60 alloy for rheoforming using self-inoculation method.DOI
Ti-Jun Chen, Rui-Quan Wang, Hai-Jun Huang, Ying Ma, Yuan Hao (2012). Grain refining technique of AM60B magnesium alloy by MgCO3.DOI
Ti-Jun Chen, Rui-Quan Wang, Ying Ma, Yuan Hao (2012). Effects of processing parameters on microstructure and ultimate tensile strength of thixoformed AM60B magnesium alloy.DOI
Hao Yuan (2012). Effect of heat-treatment technology on microstructure and mechanical properties of ZC63 magnesium alloy. Cailiao rechuli xuebao.
Gui-Rong Yang, Wen-Ming Song, Xian-Ming Sun, Ying Ma, Yuan Hao (2011). The Corrosion Behavior of Ni-P/SiC Composite Coating.DOI
Ya-Ming Li, Hong-Jun Liu, Yuan Hao (2011). Effect of Cooling Rate on Microstructure and Properties of Heat-Treated Fe3Al Intermetallics.DOI
Le Shen, Ti-Jun Chen, Ying Ma, Mingwei Liu, Yuan Hao (2011). Modification of In-situ Mg2Si/AM60B Magnesium Matrix Composites with MgCO3 and Sr.
Yuan-Dong Li, B. Xing, Ying Ma, Ti-Jun Chen, Yuan Hao (2011). Prepartion of Semisolid AM60 Alloy by Novel Self-Inoculation Method.DOI
Yuan-Dong Li, Jin-Song Wang, Yuan Hao, Yue-Zhou Ma, Ying Ma (2011). Preparation method for composite film on titanium alloy surface and solution formula thereof.
Ti-Jun Chen, Rui-Quan Wang, Ying Ma, Yuan Hao (2011). Semisolid microstructure evolution of AZ91D magnesium alloy refined by Al-Ti-B.DOI
Gui-Rong Yang, Wen-Ming Song, Ying Ma, Yuan Hao (2011). The Effect of Preheating Temperature on the Microstructure and Properties of Copper by the Liquid Die Forging Technology.DOI
Gui-Rong Yang, Wen-Ming Song, Ying Ma, Jin-jun Lu, Yuan Hao, Yuan-Dong Li, Hai-Tang Wang (2011). Microstructure of Ni / WC surface composite layer on gray iron substrate.DOI
Ti-Jun Chen, Xiang-Dong Jiang, Ying Ma, Rui-Quan Wang, Yuan Hao (2011). Grain refinement of AZ91D magnesium alloy by MgCO3.DOI
Hai-Jun Huang, Ti-Jun Chen, Ying Ma, Yuan-Dong Li, Yuan Hao (2011). Effect of Heat Treatment on Thixoformed AM60B Alloy.DOI
Ya-Ming Li, Hong-Jun Liu, Yuan Hao (2011). EFFECT OF COOLING RATE ON MICROSTRUCTURE AND PROPERTIES OF Fe3Al INTERMETALLICS.DOI
Wei-Xue Li, Jie. Zhu, Yuan Hao, Jian-Feng Dai, Qing Wang (2011). a Shear-Lag Model for Carbon Nanotube-Reinforced Magnesium Matrix Composites.DOI
Gui-Rong Yang, Wen-Ming Song, Ying Ma, Yuan Hao (2011). The Microstructure of Ni-Based Surface Infiltrated Layer on Cast Steel Substrate.DOI
Gui-Rong Yang, Ying Ma, Yuan Hao, Yuan-Dong Li, Wen-Ming Song, Xian-Ming Sun (2011). Microstructure of Fe-Cr Surface Infiltrated Composite Layer on Gray Iron Substrate.DOI
Ti-Jun Chen, W.-B. Lu, Ying Ma, Huan Huang, Yuan Hao (2011). Semisolid microstructure of AM60B magnesium alloy refined by SiC particles.DOI
Hai-Jun Huang, Ti-Jun Chen, Ying Ma, Yuan Hao (2011). Microstructural evolution during solution treatment of thixoformed AM60B Mg alloy.DOI
Gui-Rong Yang, Wen-Ming Song, Ying Ma, Yuan Hao (2011). The Bending Behavior of Surface Composite Layer Ni/WC Fabricated through Vacuum Infiltration Casting.DOI
Jin-Song Wang, Yuan Hao, Yue-Zhou Ma, Ying Ma (2011). Preparation method of composite film on surface of metallic material and solution composition for preparation method.
Jin-Song Wang, Yu-Shun Wang, Yuan Hao, Yue-Zhou Ma, Ying Ma, Xiao-feng Huang (2011). Preparation method of composite film on surface of magnesium alloy and solution formula for preparation method.
Jin-Song Wang, Yuan Hao, Ti-Jun Chen, Xue-Ying Chen, Yue-Zhou Ma, Ying Ma (2011). Preparation method of composite film on surface of steel and solution formula for preparation method.
Hao Yuan (2011). Effect of mixing ways on primary silicon of hypereutectic Al-Si alloys during controlled diffusion solidification. The Chinese Journal of Nonferrous Metals.
Hao Yuan (2011). Research on Microstructure of Thixoformed AM60B Alloy.
Gui-Rong Yang, Xian-Ming Sun, You-He Zhou, Wen-Ming Song, Ying Ma, Jin-jun Lu, Yuan Hao (2010). The Research on Wear Performance at Elevated Temperature of Ni-Based Infiltrated Layer.DOI
B. Xing, Yuan-Dong Li, Ying Ma, Ti-Jun Chen, Yuan Hao (2010). Microstructure of partially remelted billet of AM60 alloy prepared with self-inoculation method.DOI
Yuan Hao, Ti-Jun Chen, Ying Ma, Yuan-Dong Li, Feng-Yun Yan, Xiao-feng Huang (2010). SOME KEY ISSUES AND ACCESSES TO THE APPLICATION OF MAGNESIUM ALLOYS.DOI
Ti-Jun Chen, Zhan-ming Zhu, Yuan-Dong Li, Ying Ma, Yuan Hao (2010). Friction stir processing of thixoformed AZ91D magnesium alloy and fabrication of Al-rich surface.DOI
Ti-Jun Chen, Ying Ma, Rui-Quan Wang, Yuan-Dong Li, Yuan Hao (2010). Microstructural evolution during partial remelting of AM60B magnesium alloy refined by MgCO3.DOI
B. Xing, Yuan-Dong Li, Ying Ma, Yuan Hao, D. Apelian (2010). Commercial AM60 alloy for semisolid processing: Effects of continuous rheoconversion process on microstructure.DOI
Ming Chen, Yue-Zhou Ma, Yuan Hao (2010). Local arc discharge mechanism and requirements of power supply in micro-arc oxidation of magnesium alloy.DOI
Yuan-Dong Li, D. Apelian, B. Xing, Ying Ma, Yuan Hao (2010). Commercial AM60 alloy for semisolid processing: Alloy optimization and thermodynamic analysis.DOI
Xiao-Ping Zheng, Pei-Feng Zhang, Fa-Shen Li, Yuan Hao (2010). A study of magnetostriction, spin reorientation, and Mössbauer spectra of Tb0.3Dy0.6Pr0.1(Fe1−xAlx)1.95 alloys with substitution of Fe by Al.DOI
Ti-Jun Chen, Jian Li, Yuan Hao (2010). Microstructures and corrosion properties of casting in situ Al3Ti-Al composites.DOI
Ya-Ming Li, Hong-Jun Liu, Bin Xie, Yuan Hao (2010). Influence of Cooling Method on High Temperature Oxidation of Cast Fe3Al Alloy at 950.DEG.C.
Gui-Rong Yang, Wen-Ming Song, Xian-Ming Sun, Ying Ma, Jin-jun Lu, Yuan Hao, Yuan-Dong Li, Hai-Tang Wang (2010). The High Temperature Property of Ni/WC Infiltrated Composite Layer on Cast Iron Substrate.DOI
Tijun Chen, Zhan-ming ZHU, Ying Ma, Yuandong Li, Hao Yuan (2010). Friction stir processing of thixoformed AZ91D magnesium alloy and fabrication of surface composite reinforced by SiCps. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
Hao Yuan (2010). Effect of Co on As-Cast Structure and Properties of K4169 Superalloy. Rejiagong gongyi.
Hao Yuan (2010). Microstructure and Properties of Fe_3Al Intermetallic Compounds Prepared by Water Glass Sand Casting. Rejiagong gongyi.
Hao Yuan (2010). Effect of Heat Treatment on the Microstructure and Properties of Zn-11%Al-8%Cu-Mg Alloy. Rejiagong gongyi.
Hao Yuan (2010). Effect of addition of rare earth elements on the microstructure and properties of Zn-11Al-8Cu-Mg alloy. Chinese Journal of Stereology and Image Analysis.
Hao Yuan (2010). Microstructure and Properties of Fe_3Al Alloy Solidified in Permanent Mould. Cailiao kexue yu gongcheng xuebao.
Hao Yuan (2010). Effect of cobalt on solidification microstructure and segregation of K4169 superalloy. Shenyang Gongye Daxue xuebao.
Ti-Jun Chen, Ying Ma, Bing Li, Yuan-Dong Li, Yuan Hao (2009). Effects of processing parameters on wear behaviors of thixoformed AZ91D magnesium alloys.
Ti-Jun Chen, Cheng-Ren Yuan, M.-F. Fu, Ying Ma, Yuan-Dong Li, Yuan Hao (2009). Friction and wear properties of casting in-situ silicon particle reinforced ZA 27 composites.
Pei-Feng Zhang, Xiao-Ping Zheng, Fa-Shen Li, Yuan Hao (2009). Magnetism， magetostriction， and M?ssbauer effect studies of Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95 alloys.DOI
Ti-Jun Chen, Yuan Hao, Jun Sun (2009). Formation of Liquid Pools Entrapped within Solid Grains of ZA27 Alloys during Partial Remelting.
Wei‐Xue Li, Sumei Hu, Hao Yuan, Jianfeng Dai, Qing Wang, Yingge Xu (2009). HYDROGEN STORAGE PROPERTY OF Mg - Ni - TiO 2- CNTs COMPOSITES. International Journal of Modern Physics B.DOI
Hao Yuan (2009). Surface Modification Technology Research on 45~# Steel Liquid-phase Infiltration Plasma Electrolytic Saturation. New Technology & New Process.
Hao Yuan (2009). Research of Corrosion Resistance on Ni-P Gradient Coating on 45 Steel Surface. New Technology & New Process.
Chi Cao, Wang-Sheng Qian, Hong-Jun Liu, Yuan Hao (2008). Effect of Recycle Material Proportion on Microstructures and Mechanical Properties of Zinc Alloy.
Zhi-Yuan Liu, P. La, Li Zeng, Wei-Guo Wang, Yuan Hao (2008). High-aluminum heat-resistant steel for furnace tube.
Wei-Ling Lu, Ti-Jun Chen, Ying Ma, Wei-Jun Xu, Jian Yang, Yuan Hao (2008). Effects of increase extent of voltage on wear and corrosion resistance of micro-arc oxidation coatings on AZ91D alloy.DOI
Gui-Rong Yang, Wen-Ming Song, Jin-jun Lu, Yuan Hao, Ying Ma (2008). Three-point bending behavior of surface composite Al2O3/Ni on bronze substrate produced by vacuum infiltration casting.DOI
Hao Yuan (2008). Research and Development Prospects of Equal Channel Angular Pressing (ECAP) of Magnesium Alloys. Cailiao daobao.
Hao Yuan (2008). Microstructure Evolution of AZ91D Magnesium Alloy by Equal Channel Angular Pressing During Semi-Solid Isothermal Heat Treatment.
Hao Yuan (2008). Plasma Electrolytic Deposition Technology and Its Development. Cailiao daobao.
Hao Yuan (2008). Preparation of In-situ Al_3Ti_p/Al Composite and Its Tensile Properties. Rejiagong gongyi.
Hao Yuan (2008). Effect of Aluminum on Microstructure of HP40 Alloy.
Hao Yuan (2008). Research and Development of New Magnesium Alloy ZW21. Rejiagong gongyi.
Hao Yuan (2008). Development of the Technologies for Semi-solid Slurry Fabrication. Cailiao daobao.
Gui-Rong Yang, Wen-Ming Song, Jin-jun Lu, Yuan Hao, Ya-Ming Li, Ying Ma (2006). Surface composite fabrication using Fe-based alloying powder through infiltration casting technique on copper substrate.DOI
Ying Ma, Wei-Jun Xu, Ti-Jun Chen, Yuan-Dong Li, Wei-Ao Hou, Wei-Ling Lv, Yuan Hao (2006). Method for producing arc differential oxide ceramic layer on Mg metal surface.
Gui-Rong Yang, Wen-Ming Song, Jin-jun Lu, Yuan Hao, Ya-Ming Li, Ying Ma (2006). Microstructure of surface composite Al2O3/Ni on copper substrate produced by vacuum infiltration casting.DOI
Gui-Rong Yang, Yuan Hao, Wen-Ming Song, Ying Ma (2006). Effects of some parameters on formation and structure of infiltrated (surface) layer prepared by vacuum infiltration casting technique.DOI
Gui-Rong Yang, Yuan Hao, Wen-Ming Song, Ying Ma (2005). An investigation of the structure and properties of infiltrated layer on the surface of copper alloy.DOI
Xiao-Ping Zheng, Pei-Feng Zhang, Duo-Wang Fan, Fa-Shen Li, Yuan Hao (2005). A structural, magnetostrictive and Mössbauer study of Tb0.3Dy0.7(Fe0.9T0.1)1.95 alloys.DOI
杨贵荣，郝远，宋文明，马颖 (2005). Effect of some parameters of formation on surface graphite-bronze composite layer prepared by vacuum infiltration casting technique. 《材料研究与应用》.
Ying Ma, Hong-Jun Liu, Yuan Hao, Feng-Yun Yan (2005). Competitive growth of grains in ZA alloys during continuous casting with heated mould.DOI
Hao Yuan (2005). Effects of Al and Cu on Decomposition Rates of α' and β Phases in Zn-Al Alloys. Rejiagong gongyi.
Hao Yuan (2005). Effects of Aging Treatment on Microstructures and Mechanical Properties of Thixoformed AZ91D Magnesium Alloy. Rejiagong gongyi.
Hao Yuan (2005). Study and Development of SSP Die-casting Thixomolding of Magnesium Alloys. Rejiagong gongyi.
Hao Yuan (2004). Characterization of Microstructure of Permanent Mold Cast Zinc Alloy ZA27.
Jun Yang, P. La, Wei-min Liu, Yuan Hao (2004). Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting.DOI
Ti-Jun Chen, Yuan Hao, Jun Sun (2004). Microstructural evolution and phase transformations of mechanically stirred non-dendritic ZA27 alloy during partial remelting.DOI
Ying Ma, Yuan-Dong Li, Ti-Jun Chen, Yong-Zheng Liang, Feng-Yun Yan, Yuan Hao (2004). Method in use for treating surface of workpiece in magnesium alloy.
陈体军，郝远，孙军 (2003). Compressive deformation of semi-solid SiCp/ZA27 composites. Transactions of Nonferrous Metals Society of China.
Ti-Jun Chen, Yuan Hao, Jun Sun (2003). Effects of Compression Parameters on Deformation Behaviors of Semi-Solid ZA27 Alloys.DOI
Ming Ying, Hao Yuan, Feng Yun Yan, Hong Jun Liu, Chang‐Min Suh (2003). Fabrication of ZA Alloy Rods by Continuous Casting with Heated Mold. International Journal of Modern Physics B.DOI
Hao Yuan (2003). Microstructural Evolution of SiC_p/ZA27 Composite During Pre-deformation-Semisolid Isothermal Heat Treatment. Rejiagong gongyi.