孟祥雨｜吉林农业大学｜学者主页

2026

送粉速度对65Mn钢旋耕刀激光熔覆Fe60涂层裂纹的影响

杨丹，潘笑冉，赵婧琦，张月，马敬岚，孟祥雨

《吉林农业大学学报》

DOI

2026

气力集排式排肥系统分肥装置与文丘里管参数优化

于志强，孟祥雨，黄东岩，杨琦，姜峰，王建峰，王增辉

《吉林农业大学学报》

2026

基于多传感信息融合的打捆机打结装置电气化控制方法

杨琦，孟祥雨，于志强，梁银凤，刘洋，佟佳龙，王增辉

《吉林农业大学学报》

2026

Architectural control of strength and toughness in interpenetrating Cu/Cr3C2 composites via direct ink writing and melt infiltration

Shuai-Shuai Li, Rui‐Fen Guo, Xiang‐Yu Meng, Ping Shen

Engineering Failure Analysis

DOI

2026

Regulating microstructure and quasi-static/dynamic failure in architected AZ51/Al2O3 composites via topology–interface synergy

Tong Che, Xiang‐Yu Meng, Xing-Long Huang, He Ma, Rui‐Fen Guo, Ping Shen

Materials Science and Engineering A

DOI

2025

旋耕刀表面激光熔覆铁基合金的工艺参数、组织与性能优化

孟祥雨，郭志康，赵婧琦，张月，杨丹

《金属热处理》

DOI

2025

Bio-inspired gradient-heterogeneous Al/Al2O3 composites: Strength–toughness synergistic design and fracture mechanisms

Tian‐Hao Xu, Xiang‐Yu Meng, Song Shen, Song Shen, Guo-Chao Mo, Ping Shen

Composites Part A Applied Science and Manufacturing

DOI

2025

3D printed reciprocal architectures for enhanced strength–toughness synergy in Al/Al2O3 composites

Jie Yang, Jin Dong Zhou, Xiang‐Yu Meng, Shuaishuai Li, Ping Shen

Materials Science and Engineering A

DOI

2025

Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration

Song Shen, Xiang‐Yu Meng, Tian‐Hao Xu, He Ma, Guo‐Chao Mo, Rui‐Fen Guo, Ping Shen

Journal of the American Ceramic Society

DOI

2025

Anisotropy and damage tolerance in zigzag-structured Al/Al2O3 composites fabricated via 3D printing and pressure infiltration

Xiang‐Yu Meng, Dong-Xu Zhao, Shuaishuai Li, Dan Yang, Tong Che, Ping Shen

Ceramics International

DOI

2024

3D printing and near-net shaping of laminated Cr3C2/Cu composites: Enhanced strength, toughness, and anisotropy

Shuaishuai Li, Xiang‐Yu Meng, Rui‐Fen Guo, Ping Shen

Composites Part B Engineering

DOI

2024

Fabrication and characterization of SiC-reinforced magnesium-matrix composites with honeycomb structures and anisotropic properties

Tong Che, Xiang‐Yu Meng, Tao Yu, Rui‐Fen Guo, Ping Shen

Ceramics International

DOI

2024

Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance

Mingyue Jiang, Xiang‐Yu Meng, Jin Dong Zhou, Zhenyu Wei, Haifeng Zhang, Ping Shen

Additive manufacturing

DOI

孟祥雨

精选作品

期刊论文

送粉速度对65Mn钢旋耕刀激光熔覆Fe60涂层裂纹的影响

气力集排式排肥系统分肥装置与文丘里管参数优化

基于多传感信息融合的打捆机打结装置电气化控制方法

Architectural control of strength and toughness in interpenetrating Cu/Cr3C2 composites via direct ink writing and melt infiltration

Regulating microstructure and quasi-static/dynamic failure in architected AZ51/Al2O3 composites via topology–interface synergy

旋耕刀表面激光熔覆铁基合金的工艺参数、组织与性能优化

Bio-inspired gradient-heterogeneous Al/Al2O3 composites: Strength–toughness synergistic design and fracture mechanisms

3D printed reciprocal architectures for enhanced strength–toughness synergy in Al/Al2O3 composites

Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration

Anisotropy and damage tolerance in zigzag-structured Al/Al2O3 composites fabricated via 3D printing and pressure infiltration

3D printing and near-net shaping of laminated Cr3C2/Cu composites: Enhanced strength, toughness, and anisotropy

Fabrication and characterization of SiC-reinforced magnesium-matrix composites with honeycomb structures and anisotropic properties

Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance

研究方向