梁忠伟｜广州大学｜学者主页

2026

平衡曲轴-轴承系统功耗与振动的轴承间隙优化设计策略

覃哲，梁忠伟，金斌

《润滑与密封》

2026

基于CFD的高速电主轴气隙风摩损耗

赵海宁，王同海，赵川，徐方超，杨文华，李博，梁忠伟，孙凤

《西南交通大学学报》

2026

Atomistic mechanism of Ni strengthening and friction reduction in (AlCoCrFe)1-x(Ni)x HEAs: Dislocation locking and stacking fault synergy

Wei Li, Zongbi Huang, Jiaqi Xie, Yubo Hua, Jiaqi Du, Gongbin Tang, Zhongwei Liang

Materials & Design

DOI

2026

Molecular dynamics-assisted machine learning for designing CoCrFeNiTi high-entropy alloys with exceptional strength-ductility synergy

Maoli Yang, Xi Liao, Jiafeng Chen, Zhitao Cheng, Xuezhe Yu, Zhongwei Liang, Fuchuan Huang, Gongbin Tang

Intermetallics

DOI

2026

Ultrasonic Strengthening of the Mechanical Properties of AZ31B Magnesium Alloy via Ti/SiC Powder Infiltration and Microstructural Refinement

Zhongwei Liang, Qizhao Zhong, Yunqi Zhong, Yanjun Chen, Zhuan Zhao, Lingli Jiang

Advanced Engineering Materials

DOI

2026

Facile preparation of Cr/CrN particle-reinforced layer on 18CrNiMo7–6 steel for enhanced wear resistance

Gongbin Tang, Yiting Pan, Shaoyang Li, Haobing Hu, Meicong Wang, Yifan Lin, Zhongwei Liang

Surface and Coatings Technology

DOI

2026

Effect of Cu on tribological behavior and oxidation layer evolution of CoCrFeNi high-entropy alloy via SLM

Zhongwei Liang, Xuezhe Yu, Jiafeng Chen, Zhitao Cheng, Qiang Li, Guibin Tan, Xing Huang, Gongbin Tang

Tribology International

DOI

2026

Enhanced wear resistance of 20CrMnTi steel by ultrasonic shot grinding peening with an AlN-modified layer

Gongbin Tang, Yubo Hua, Jinfeng Yang, Wu Guo, Jiafeng Chen, Xiaoli Chen, Fenghong Gao, Zhitao Cheng, Xuelian Xie, Jinxin Xue, Zhongwei Liang

Applied Surface Science

DOI

2026

Wear resistance improvement of 9Cr18Mo steel by warm–cool ultrasonic shot peening

Jinrui Xiao, Lilin Zhang, Sentao Diao, Liang Xu, Xincheng Xie, Zhongwei Liang

Journal of Manufacturing Processes

DOI

2026

Study on the reprinting properties of pure titanium powder after selective laser melting under nitrogen gas

Yunmian Xiao, Pengwei Deng, Jialin Gao, Zibin Liu, Haoyang Lei, Changhui Song, Chaozhan Chen, Zhongwei Liang

Materials Science and Engineering A

DOI

2026

SiC induced in-situ modification: Microstructure and properties of fine-grained SiC/GH3536 Ni-superalloy composites fabricated by laser powder bed fusion

Zhongwei Liang, Pengwei Deng, Yunmian Xiao, Zhongwei Yan, Junfei Huang, Chaozhan Chen, Chaozhan Chen, Zhuan Zhao, Jie Chen, Zibin Liu, Changhui Song

Journal of Alloys and Compounds

DOI

2026

Composite layer formation on AZ91D magnesium alloy via temperature-assisted ultrasonic shot peening for enhanced wear resistance

Jinrui Xiao, Liang Xu, Sentao Diao, Xincheng Xie, Lilin Zhang, Zhongwei Liang

Ultrasonics

DOI

2026

Mo2N coating for improved wear resistance of 42CrMo alloy via ultrasonic strengthening grinding

Jinsheng Cui, Feng Gao, Gongbin Tang, Yipin Zhang, Wu Guo, Xuelian Xie, Zhongwei Liang

Tribology International

DOI

2026

Enhanced high–temperature oxidation resistance of Inconel 718 alloy by fabricating a Cr2O3/Al2O3 coating through ultrasonic strengthening grinding process

Baligasima Patrick, Zhe Qin, Zhuan Zhao, Pei He, Zhongwei Liang, Zi-Yu Tao, Yanjun Chen, Si-Jie Hu, Yongjun Cao

Applications of Surface Science

DOI

2026

Laser Texturing Synergized with AlCrN Coating Drives High-Temperature Tribological Enhancement of IN718 Nickel-Based Superalloy

Zhongwei Liang, Lei Hu, Zhuan Zhao, Yunqi Zhong, Sijie Hu, Zishan Yang, Qizhao Zhong

Wear

DOI

2026

Fabrication of Gradient Structure and Al-Ce Coating for Enhanced Corrosion Resistance of 7075 Aluminum Alloy.

Zhongwei Liang, Sentao Diao, Jinrui Xiao, Bai-Ming Hu, Xu Liang, Lilin Zhang

Langmuir

DOI

2025

镍基合金GH4169微动摩擦磨损特性研究

谢根牙，周琰，李志鹏，林凡，杨光，梁忠伟

《机电工程技术》

2025

TC11钛合金表面TiN颗粒强化层组织与性能分析

梁忠伟，林子顺，唐荟，李天羿，张宇鹏，BALIGASIMA Patrick

《航空制造技术》

DOI

2025

超声加工磨粒冲击仿真与实验研究

黄卫清，黄开杰，吴佳伦，安大伟，梁忠伟

《压电与声光》

2025

Improved wear resistance of Ti-6Al-4 V alloy by fabricating a SiC/Co composite layer through ultrasonic strengthening grinding process

Zhongwei Liang, Wenhao Dou, Zhuan Zhao, Luo Ran, Anqi Lin, Tao Zou, Yunqi Zhong, Wenfeng Ding, Qun Lei

Results in Engineering

DOI

2025

Surface modification of 304 stainless steel by ultrasonic strengthening grind process with Al2O3-MoS2-WC hybrid ceramic particles for wear resistance enhancement

Zhongwei Liang, Pei He, Zhuan Zhao, Yunqi Zhong, Zhenyan Li, Mei-Cong Wang

Surface & Coatings Technology

DOI

2025

Superior wear performance of titanium alloys from TiN coatings and ultrafine-grained gradient structures

Xiujie Chen, Zi-Shun Lin, Ke Xiao, Yanfeng Han, Wenfeng Ding, Tianyi Li, Feifei Yuan, S. Fang, Zhongwei Liang, Liangchi Zhang

Surface & Coatings Technology

DOI

2025

Improving the resistance to high-temperature oxidation of 254SMo super-austenitic stainless steel welds using ultrasonic shot peening-induced gradient nanostructures.

Xin-Cheng Xie, Zhixiang Zou, Mingchao Chen, Jinrui Xiao, Zhongwei Liang, Jiayi Chen

Ultrasonics

DOI

2025

Effect of Cu content on microstructure and high-temperature oxidation behaviors of AlCu CoCrFeNi2.1 high-entropy alloys manufactured by laser directed energy deposition

Zhaoyang Liu, Jiawei Liu, Xiaokang Fan, Tao Zou, Zhongwei Liang

Journal of Materials Research and Technology

DOI

2025

Adaptive neural network preset time fault tolerant control of omnidirectional mobile robot with input saturation based on state constraints

Jia-Jian Liang, Zhongwei Liang, Zhiwen Su, Jia-Qiao Liang, Xinan Zeng, Li Deng, Weipeng Zhang, Tao Zou, Yang Yuan

Nonlinear dynamics

DOI

2024

基于超声强化研磨加工的GH4099合金耐磨服役性能提升研究

刘晓初，唐荟，林子顺，谢智铭，殷浚彬，梁忠伟

《机电工程技术》

2024

基于超声强化改性研磨时长的AlCoCrFeNi2.1共晶高熵合金组织和力学性能影响研究

殷浚彬，梁忠伟，刘朝阳，张博森，唐荟，谢智铭

《机电工程技术》

2024

基于上位机的工业机器人磨头工具坐标系自动标定技术研究

梁忠伟，谢智铭，梁家健，张卫鹏，唐荟，殷浚彬

《机电工程技术》

2024

不同温度下柔性刷丝HVOF涂层摩擦磨损及氧化行为研究

周琰，李志鹏，梁忠伟，牛少鹏，邓畅光，周亮，朱旻昊

《表面技术》

2024

强化改性研磨时间对12Cr17Mn6Ni5N钢表层特性及拉伸性能的影响

何鹏，谢鑫成，陈嘉懿，张宇鹏，邹涛，萧金瑞，梁忠伟

《表面技术》

2024

超声振动超精密车削Ti6Al4V的表面质量研究

李东炜，梁忠伟，孔早慧

《机床与液压》

2024

Effect of annealing heat treatment on the microstructure and mechanical properties of laser directed energy deposited CrMnFeCoNi high entropy alloy

Zhao-Yang Liu, Tao Zou, Zhongwei Liang, Xiao-Chu Liu, Zhi-Yuan Liu, Yao Li

Journal of Materials Research and Technology

DOI

2024

Enhancing the tensile performance of 12Cr17Mn6Ni5N steel weld joints through strengthened grinding process-induced gradient structures

Xin-Cheng Xie, P. He, Jiayi Chen, Tao Zou, Yu-Peng Zhang, Jinrui Xiao, Zhongwei Liang

Journal of Materials Research and Technology

DOI

2024

Ultrasonic strengthening grinding process induces α-Al2O3 adhesion to improve high temperature oxidation resistance of TA15 alloy

Zhuan Zhao, Hui Tang, Jinrui Xiao, Xiao-Chu Liu, Wen-Feng Ding, Zhongwei Liang

Surface & Coatings Technology

DOI

2024

Improving the corrosion resistance of aluminum alloy welds through powder-ball combined ultrasonic shot peening

Xin-Cheng Xie, Yu Ye, Zhixiang Zou, Yuan-Dong Mo, Zhongwei Liang, Gong-Bin Tang

Journal of Materials Processing Technology

DOI

2024

Wear resistance of Cronidur 30 steel enhanced by optimizing the strengthened grinding process (SGP) parameters using a Box-Behnken design (BBD) method

Zhuan Zhao, Wei-Long Chen, Xin-Cheng Xie, Teng Ma, Shanshan Huang, Jinrui Xiao, Zhongwei Liang

Journal of Manufacturing Processes

DOI

2024

Tribological and mechanical properties improvement of G20CrNiMo alloy via fabricating gradient composite layer through ultrasonic strengthening grinding process

Jinrui Xiao, Bo-Sen Zhang, Yu-Jie Lin, Hui Tang, Zhongwei Liang, Xin-Cheng Xie

Materials Today Communications

DOI

2024

Mechanical property improvement of wire-arc additive manufactured 06Cr19Ni9 steel based on ultrasonic strengthening grinding process

Jinrui Xiao, Yiteng Zhang, Xin-Cheng Xie, Wen-Feng Ding, Zhuan Zhao, Zhongwei Liang

Journal of Materials Research and Technology

DOI

2024

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Zhaoyang Liu, Xiao-Chu Liu, Tao Zou, Ya-Fei Wang, Jinrui Xiao, Zhongwei Liang

Journal of Materials Research and Technology

DOI

2024

Gradient hardening of Ni-based superalloy K403 for enhanced thermal fatigue resistance

Gong-Bin Tang, Shiyuan Li, Jinfeng Yang, Xin-Yu Zhou, Rong-Bin She, Dong-Wei Li, Tao Zou, Jingwen Wang, Zhongwei Liang

Surface & Coatings Technology

DOI

2023

强化研磨对GCr15轴承钢耐蚀性的影响

吴俊，梁忠伟，刘晓初，吴子轩，范立维

《轴承》

2023

AlN和BN纳米颗粒含量对IR3环氧树脂黏度及复合材料力学性能的影响

吴垄峰，梁忠伟，方志春，邹涛，张宇鹏，信纪军，王维，李来风

《机械工程材料》

2023

射流冲击强化改性研磨对G30Cr15MoN轴承钢表面性能的影响

梁忠伟，黄珊珊，刘晓初，范立维，何森

《轴承》

2023

Improvement of the high-temperature oxidation resistance of 254SMo using ultrasonic strengthening grinding

Jiayi Chen, Xin-Cheng Xie, Tao Zou, Yu-Peng Zhang, Hai-Yan Wang, Zhongwei Liang

Journal of Materials Research and Technology

DOI

2023

Enhancement of high-temperature fatigue properties of 310S stainless steel welded joints by strengthened grinding process inducing gradient structure

Xin-Cheng Xie, Di Yu, Jiayi Chen, Zhongwei Liang, Jingwen Wang

Engineering Failure Analysis

DOI

2023

Improved wear resistance of 440C steel ball via ultrasonic strengthening grinding process

Jinrui Xiao, Yiteng Zhang, Zhuan Zhao, Xin-Cheng Xie, Zhongwei Liang

Journal of Materials Processing Technology

DOI

2023

Enhancing Tribological Properties of 18CrNiMo7-6 through Grain Refinement incorporating Al2O3 particles

Shao-Rong Li, Gong-Bin Tang, Tao Zou, Jingwen Wang, Zixin Ou, Hairui Lin, Fenghua Su, Zhongwei Liang

Tribology International

DOI

2023

Simultaneous fabrication of Ti-MoS2 self-lubricating coatings and gradient structures to improve the wear resistance of AZ91D alloys

Xiujie Chen, Xin-Cheng Xie, Tao Zou, Yu-Peng Zhang, Zhongwei Liang

Surface & Coatings Technology

DOI

2022

强化研磨喷射压力对GCr15轴承钢应力腐蚀性能的影响

刘晓初，耿晨，阮毅，梁忠伟，冯文康，范立维，吴子轩，吴俊

《机电工程技术》

2022

光栅尺被动隔振系统建模与仿真分析

邓宏光，陈新度，王晗，梁忠伟

《机械设计与制造》

2022

基于正态分布的GCr15轴承钢强化研磨残余应力场数值模拟

范立维，梁忠伟，刘晓初，吴俊，吴子轩，耿晨，谢鑫成

《表面技术》

2021

强化研磨加工中喷射角度对GCr15轴承钢耐摩擦腐蚀性能的影响

刘晓初，吴子轩，梁忠伟，吴俊，范立维，耿晨，谢鑫成，黄伟锋，危珊

《机电工程技术》

2021

强化研磨对轴承套圈表面耐蚀性的影响

萧金瑞，梁忠伟，黄建枫，高伟林，刘晓初，陈宥丞

《表面技术》

DOI

2021

基于随机碰撞的GCr15钢强化研磨表面粗糙度数值模拟

刘晓初，刘镇，梁忠伟，黄建枫，高伟林，萧金瑞

《表面技术》

DOI

2020

轴承钢强化研磨的仿真及实验

郝晓斌，刘镇，康军辉，梁忠伟

《机电工程技术》

2020

强化研磨加工中喷射角度对GCr15轴承钢板塑性变形的影响

刘晓初，段伟建，梁忠伟，廖俊杰，萧金瑞

《工具技术》

2020

强化研磨微纳加工参数对轴承套圈滚道表面硬度的影响

萧金瑞，刘晓初，梁忠伟，黄建枫，高伟林

《精密成形工程》

2019

强化研磨喷射角度对GCr15轴承钢加工的影响

梁忠伟，廖俊捷，刘晓初，陈宥丞，萧金瑞

《工具技术》

2018

钢珠损伤对轴承套圈强化研磨加工表面粗糙度和硬度的影响

萧金瑞，刘晓初，梁忠伟，萧仲敏

《表面技术》

2017

轴承钢丸直径配比对强化研磨内圈沟道面硬度及形貌的影响

刘晓初，温溢恒，梁忠伟，廖少棚，姬武勋

《机床与液压》

2017

基于PLC的轴承强化研磨机控制系统设计

萧金瑞，刘晓初，梁忠伟，刘长红，唐睿智

《机床与液压》

2016

基于CDIO模式的广东省研究生论坛创新组织研究——以2015年广东省机械工程及智能装备研究生学术论坛(广州大学)为例

梁忠伟，刘晓初

《学理论》

2015

基于正交实验的空调换热器流场模拟及性能分析

梁忠伟，周俊辉，刘晓初

《广州大学学报(自然科学版)》

2015

轴承研磨机加工流场的参数优化及实验分析

廖少棚，梁忠伟，刘晓初，周俊辉，谢碧洪

《机床与液压》

2015

基于强化研磨的轴承套圈表面“油囊”研究

梁忠伟，温溢恒，刘晓初，王豪

《机电信息》

2014

轴承强化研磨加工时间对沟道表面残余压应力的影响

谢碧洪，刘晓初，梁忠伟，陈胜，萧金瑞，张建文

《机电工程技术》

2014

基于ANSYSCFX的一种气压式送料罐优化设计

谢碧洪，梁忠伟，刘晓初，萧金瑞，黄骏，陈志斌

《机床与液压》

2009

基于最大类间方差法与Mahalanobis距离的IC芯片彩色图像多阈值分割技术研究

梁忠伟

《组合机床与自动化加工技术》

2007

基于灰度直方图拟合曲线的数字图像多阈值分割技术研究

梁忠伟，叶邦彦，彭锐涛，徐兰英

《现代制造工程》

DOI

2007

基于图像区域像素二阶中心矩的集成电路芯片图像拼接技术

梁忠伟，叶邦彦，徐兰英，彭锐涛

《现代制造工程》

DOI

2006

集成电路芯片机器视觉检测技术研究

梁忠伟

精选作品

期刊论文

平衡曲轴-轴承系统功耗与振动的轴承间隙优化设计策略

基于CFD的高速电主轴气隙风摩损耗

Atomistic mechanism of Ni strengthening and friction reduction in (AlCoCrFe)1-x(Ni)x HEAs: Dislocation locking and stacking fault synergy

Molecular dynamics-assisted machine learning for designing CoCrFeNiTi high-entropy alloys with exceptional strength-ductility synergy

Ultrasonic Strengthening of the Mechanical Properties of AZ31B Magnesium Alloy via Ti/SiC Powder Infiltration and Microstructural Refinement

Facile preparation of Cr/CrN particle-reinforced layer on 18CrNiMo7–6 steel for enhanced wear resistance

Effect of Cu on tribological behavior and oxidation layer evolution of CoCrFeNi high-entropy alloy via SLM

Enhanced wear resistance of 20CrMnTi steel by ultrasonic shot grinding peening with an AlN-modified layer

Wear resistance improvement of 9Cr18Mo steel by warm–cool ultrasonic shot peening

Study on the reprinting properties of pure titanium powder after selective laser melting under nitrogen gas

SiC induced in-situ modification: Microstructure and properties of fine-grained SiC/GH3536 Ni-superalloy composites fabricated by laser powder bed fusion

Composite layer formation on AZ91D magnesium alloy via temperature-assisted ultrasonic shot peening for enhanced wear resistance

Mo2N coating for improved wear resistance of 42CrMo alloy via ultrasonic strengthening grinding

Enhanced high–temperature oxidation resistance of Inconel 718 alloy by fabricating a Cr2O3/Al2O3 coating through ultrasonic strengthening grinding process

Laser Texturing Synergized with AlCrN Coating Drives High-Temperature Tribological Enhancement of IN718 Nickel-Based Superalloy

Fabrication of Gradient Structure and Al-Ce Coating for Enhanced Corrosion Resistance of 7075 Aluminum Alloy.

镍基合金GH4169微动摩擦磨损特性研究

TC11钛合金表面TiN颗粒强化层组织与性能分析

超声加工磨粒冲击仿真与实验研究

Improved wear resistance of Ti-6Al-4 V alloy by fabricating a SiC/Co composite layer through ultrasonic strengthening grinding process

Surface modification of 304 stainless steel by ultrasonic strengthening grind process with Al2O3-MoS2-WC hybrid ceramic particles for wear resistance enhancement

Superior wear performance of titanium alloys from TiN coatings and ultrafine-grained gradient structures

Improving the resistance to high-temperature oxidation of 254SMo super-austenitic stainless steel welds using ultrasonic shot peening-induced gradient nanostructures.

Effect of Cu content on microstructure and high-temperature oxidation behaviors of AlCu CoCrFeNi2.1 high-entropy alloys manufactured by laser directed energy deposition

Adaptive neural network preset time fault tolerant control of omnidirectional mobile robot with input saturation based on state constraints

基于超声强化研磨加工的GH4099合金耐磨服役性能提升研究

基于超声强化改性研磨时长的AlCoCrFeNi2.1共晶高熵合金组织和力学性能影响研究

基于上位机的工业机器人磨头工具坐标系自动标定技术研究

不同温度下柔性刷丝HVOF涂层摩擦磨损及氧化行为研究

强化改性研磨时间对12Cr17Mn6Ni5N钢表层特性及拉伸性能的影响

超声振动超精密车削Ti6Al4V的表面质量研究

Effect of annealing heat treatment on the microstructure and mechanical properties of laser directed energy deposited CrMnFeCoNi high entropy alloy

Enhancing the tensile performance of 12Cr17Mn6Ni5N steel weld joints through strengthened grinding process-induced gradient structures

Ultrasonic strengthening grinding process induces α-Al2O3 adhesion to improve high temperature oxidation resistance of TA15 alloy

Improving the corrosion resistance of aluminum alloy welds through powder-ball combined ultrasonic shot peening

Wear resistance of Cronidur 30 steel enhanced by optimizing the strengthened grinding process (SGP) parameters using a Box-Behnken design (BBD) method

Tribological and mechanical properties improvement of G20CrNiMo alloy via fabricating gradient composite layer through ultrasonic strengthening grinding process

Mechanical property improvement of wire-arc additive manufactured 06Cr19Ni9 steel based on ultrasonic strengthening grinding process

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Gradient hardening of Ni-based superalloy K403 for enhanced thermal fatigue resistance

强化研磨对GCr15轴承钢耐蚀性的影响

AlN和BN纳米颗粒含量对IR3环氧树脂黏度及复合材料力学性能的影响

射流冲击强化改性研磨对G30Cr15MoN轴承钢表面性能的影响

Improvement of the high-temperature oxidation resistance of 254SMo using ultrasonic strengthening grinding

Enhancement of high-temperature fatigue properties of 310S stainless steel welded joints by strengthened grinding process inducing gradient structure

Improved wear resistance of 440C steel ball via ultrasonic strengthening grinding process

Enhancing Tribological Properties of 18CrNiMo7-6 through Grain Refinement incorporating Al2O3 particles

Simultaneous fabrication of Ti-MoS2 self-lubricating coatings and gradient structures to improve the wear resistance of AZ91D alloys

强化研磨喷射压力对GCr15轴承钢应力腐蚀性能的影响

光栅尺被动隔振系统建模与仿真分析

基于正态分布的GCr15轴承钢强化研磨残余应力场数值模拟

强化研磨加工中喷射角度对GCr15轴承钢耐摩擦腐蚀性能的影响

强化研磨对轴承套圈表面耐蚀性的影响

基于随机碰撞的GCr15钢强化研磨表面粗糙度数值模拟

轴承钢强化研磨的仿真及实验

强化研磨加工中喷射角度对GCr15轴承钢板塑性变形的影响

强化研磨微纳加工参数对轴承套圈滚道表面硬度的影响

强化研磨喷射角度对GCr15轴承钢加工的影响

钢珠损伤对轴承套圈强化研磨加工表面粗糙度和硬度的影响

轴承钢丸直径配比对强化研磨内圈沟道面硬度及形貌的影响

基于PLC的轴承强化研磨机控制系统设计

基于CDIO模式的广东省研究生论坛创新组织研究——以2015年广东省机械工程及智能装备研究生学术论坛(广州大学)为例

基于正交实验的空调换热器流场模拟及性能分析

轴承研磨机加工流场的参数优化及实验分析

基于强化研磨的轴承套圈表面“油囊”研究

轴承强化研磨加工时间对沟道表面残余压应力的影响

基于ANSYSCFX的一种气压式送料罐优化设计

基于最大类间方差法与Mahalanobis距离的IC芯片彩色图像多阈值分割技术研究

基于灰度直方图拟合曲线的数字图像多阈值分割技术研究

基于图像区域像素二阶中心矩的集成电路芯片图像拼接技术

集成电路芯片机器视觉检测技术研究

预印本

Enhanced Tribological Performance of AlN-Coated 20CrMnTi Steel from Gradient-Aligned Dislocations and an Al2O3-Rich Oxide Film

研究方向