李志超｜山东科技大学｜学者主页

2026

温轧压下率对临界退火中锰钢Lüders带形成与力学行为的影响

马明，李清，杜晓明，李志超

《功能材料》

2026

Accurate state of health estimation of lithium-ion batteries based on deep learning and polarization features

Zhichao Li, Zhiguo Qu, Baobao Hu

Future Batteries

DOI

2026

Effects of Annealing Temperature on the Microstructure and Mechanical Properties of Warm‐Rolled Advanced High‐Strength Twinning‐Induced Plasticity Steel

Meiqing Cao, Wei Zhang, Kun Xie, Bowen Ye, Pengtao Chen, Yunlong Song, Zhichao Li

steel research international

DOI

2025

热基板Zn-Al-Mg镀层的组织与耐蚀性影响因素分析

李冰，王世豪，陈利伟，何涛，李志超，熊俊伟，张毅

《金属热处理》

DOI

2025

厚规格热基无花镀锌板表面缺陷研究及控制

王刚，李志超，门均磊，陈统，刘洪磊，常智乾，王野

《金属功能材料》

DOI

2025

Tailoring Heterogeneous Austenite Stability via Rapid Heating in Medium‐Mn Steel: Enabling Discontinuous Sustained Transformation‐Induced Plasticity

Ying Sun, Yingjian Jiao, Zhichao Li, Kun Xie, Lianfang He, Huiping Li

steel research international

DOI

2024

典型特殊制备技术对无取向电工钢织构的影响规律

金宇晨，李志超

《材料工程》

2024

Experimental investigation and numerical analysis on pool boiling heat transfer of heated steel balls in deionized water

Lidan Ning, Hongli Hou, Xiaowen Liu, Yaxing Sun, Lianfang He, Zhichao Li, Huiping Li

International Communications in Heat and Mass Transfer

DOI

2024

Research on the Dynamic Softening Mechanism of Dual‐Phase Structure During Warm Forming of Fe–8.5Mn–1.5Al Medium‐Manganese Steel

Xiuzheng Liu, Xiao‐Lin Li, Ying Sun, Hongli Hou, Huiping Li, Zhichao Li, Lianfang He

steel research international

DOI

2023

Thermal deformation behavior and microstructure evolution of Fe−8.5Mn−1.5Al light−weight medium manganese steel

Xiuzheng Liu, Ying Sun, Xiaoying Zhang, Huiping Li, Zhichao Li, Lianfang He

Journal of Materials Research and Technology

DOI

2023

Microstructure Evolution and Mechanical Properties of Light Medium Manganese Steel: Different Rolling Directions during Warm Stamping

Qiannan Li, Ying Sun, Huixin Zuo, Jinfeng Feng, Zhichao Li, Zhihui Cai, Lianfang He, Huiping Li

Journal of Materials Engineering and Performance

DOI

2023

Effect of Induction Quenching and Tempering Temperature on the Mechanical Properties and Microstructure Evolution of 45 Steel for Linear Guide

Ying Sun, Lianfang He, Yuyang Gao, Shuo Fang, Zhichao Li, Huiping Li

Journal of Materials Engineering and Performance

DOI

2023

Experimental study of bubble behaviors and heat transfer coefficient on hot steel balls during deionized water pool boiling

Lidan Ning, Yaxing Sun, Xiaowen Liu, Lianfang He, Zhichao Li, Huiping Li

Heat and Mass Transfer

DOI

2023

Microstructure–Mechanical Property Relationship and Austenite Stability in Transformation-Induced Plasticity Steels: Effects of Quenching and Partitioning Processing and Quenching and Tempering Treatments

Huixin Zuo, Jinfeng Feng, Ying Sun, Qiannan Li, Zhichao Li, Devesh K. Misra, Lianfang He, Huiping Li

Journal of Materials Engineering and Performance

DOI

2023

Effect of the Rate and Temperature of Hot Deformation on Strain Resistance of Duplex Stainless Steel

Zhichao Li, Jing Bo Wu, Qiannan Li, Xinjing Li, Lianfang He, Huiping Li, Zhihui Cai

Metal Science and Heat Treatment

DOI

2023

Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation

Qiannan Li, Huixin Zuo, Jinfeng Feng, Ying Sun, Zhichao Li, Lianfang He, Huiping Li

Materials Technology

DOI

2023

Effect of Q&P and Q&T Treatments on the Stability of Austenite and Mechanical Properties of Steel 0.2% C – 8.5% Mn – 3.0% Al

Zhichao Li, Xinjing Li, Yanjie Mou, Devesh K. Misra, Xin Zhang, Lianfang He, Huiping Li

Metal Science and Heat Treatment

DOI

2022

改善09MnNi容器钢低温冲击韧性的机理

宁博，李志超，武会宾，张丙军，黄曼丽，丁超

《材料研究学报》

2022

Optimization of Induction Hardening for Sprocket Based on Numerical Simulation and Experiment Design

Ying Sun, Lianfang He, Zhichao Li, Huiping Li

Journal of Materials Engineering and Performance

DOI

2022

Research on the heat transfer characteristics of air-atomized water spray cooling by experiment and inverse heat conduction method

Lidan Ning, Shuncun Luo, Zhichao Li, Lianfang He, Huiping Li

Heat and Mass Transfer

DOI

2021

高锰钢高速压缩时γ→ε-M和ε-M→α′-M的相变特征

王丽娜，李志超，武晓龙，马丹丹，杨平

《材料工程》

2021

亚温淬火对09MnNiDR容器钢板组织及断裂性能的影响

张丙军，谢章龙，席连云，李志超，宁博

《金属热处理》

2021

Wetting layer evolution and interfacial heat transfer in water-air spray cooling process of hot metallic surface

Lidan Ning, Liping Zou, Zhichao Li, Huiping Li

Thermal Science

DOI

2021

Evaluation of interfacial heat transfer coefficient based on the experiment and numerical simulation in the air-cooling process

Liping Zou, Lidan Ning, Xiaowei Wang, Zhichao Li, Lianfang He, Huiping Li

Heat and Mass Transfer

DOI

2021

Elevation of Impact Toughness of Medium-Manganese Trip-Steel 0.2% C – 6% Mn – 3% Al Due to Evolution of Microstructure Under Heat Treatment

Yanjie Mou, Xinjing Li, Zhichao Li, Devesh K. Misra, Zhihui Cai, Lianfang He, Huiping Li

Metal Science and Heat Treatment

DOI

2021

The significance of microstructural evolution on governing impact toughness of Fe-0.2C-6Mn-3Al medium-Mn TRIP steel studied by a novel heat treatment

Zhichao Li, Xinjing Li, Yanjie Mou, Zhihui Cai, Devesh K. Misra, Xin Zhang, Huiping Li

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2020

低温容器用07MnNiMoDR钢的热处理优化

姜在伟，吴俊平，张仪杰，宁博，李志超

《金属热处理》

DOI

2020

The Significance of Austenite/Ferrite/Martensite Ratio on Governing Impact Toughness of Fe-0.2C-6Mn-1.5Al Medium-Mn Transformation-Induced Plasticity Steel Studied by a Novel Heat Treatment

Zhichao Li, Yanjie Mou, Xinjing Li, Devesh K. Misra, Lianfang He, Huiping Li

Journal of Materials Engineering and Performance

DOI

2020

The Significance of Microstructure Evolution on Governing Impact Toughness of Fe–0.2C–8.5Mn–3Al Medium‐Mn TRIP Steel Studied by a Novel Heat Treatment

Zhichao Li, Yanjie Mou, Xinjing Li, Devesh K. Misra, Hua Ding, Lianfang He, Huiping Li

steel research international

DOI

2019

Design of an Effective Heat Treatment Involving Intercritical Hardening for High Strength/High Elongation of 0.2C–3Al–(6–8.5)Mn–Fe TRIP Steels: Microstructural Evolution and Deformation Behavior

Yanjie Mou, Zhichao Li, Xiaoteng Zhang, Devesh K. Misra, Lianfang He, Huiping Li

Metals

DOI

2019

Bonding of Zr44Ti11Cu10Ni10Be25 bulk metallic glass and AZ31B magnesium alloy by hot staking extrusion

Weilu Zhou, Huiping Li, Zhichao Li, Xibin Zhu, Lianfang He

Vacuum

DOI

2019

Estimated temperature-dependent interfacial heat transfer coefficient during gas cooling based on firefly algorithm and finite element method

Xiaowei Wang, Huiping Li, Lianfang He, Zhichao Li, Zhaozhi Wang

Heat and Mass Transfer

DOI

2019

Analysis of Phase Transformation and Mechanical Properties of 55CrMo Steel during Induction Hardening

Huiping Li, Weilu Zhou, Haijuan Liu, Zhichao Li, Lianfang He

Journal of Testing and Evaluation

DOI

2018

Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map

Zhiqiang Wu, Yubo Tang, Wei Chen, Liwei Lu, Eric Li, Zhichao Li, Hua Ding

Vacuum

DOI

2018

Effect of Ti substitution on the hardness and electrochemical property of laser clad Zr-Al-Co (Ti) amorphous-nanocrystalline coating

Yumei Wu, Chunzhi Zhang, Pengyuan Qiu, Zhichao Li, Huiping Li, Canming Wang

Materials Research Express

DOI

2018

Effects of Heating and Quenching Processing Parameters on Phase Transformation of 55CrMo Steel

Haijuan Liu, Huiping Li, Zhichao Li, Lianfang He

Journal of Materials Engineering and Performance

DOI

2018

Evaluation of multi-objective inverse heat conduction problem based on particle swarm optimization algorithm, normal distribution and finite element method

Xiaowei Wang, Huiping Li, Lianfang He, Zhichao Li

International Journal of Heat and Mass Transfer

DOI

2018

Numerical simulation of hot blanking for boron steel B1500HS based on ductile fracture criterion

Huiping Li, Hongli Hou, Zhichao Li, Lianfang He, Xiaowei Wang

The International Journal of Advanced Manufacturing Technology

DOI

2018

Estimation of interfacial heat transfer coefficient in inverse heat conduction problems based on artificial fish swarm algorithm

Xiaowei Wang, Huiping Li, Zhichao Li

Heat and Mass Transfer

DOI

2017

Fe-8/11Mn-4Al-0.2C钢的力学性能及应变硬化行为

蔡志辉，李志超，才博，丁桦

《东北大学学报(自然科学版)》

2017

Fabrication of Zr-based bulk metallic glass/aluminum alloy multi-materials by stacking extrusion

Rui Jiang, Huiping Li, Zhichao Li, Lianfang He

Vacuum

DOI

2016

高温退火工艺对CGO硅钢Goss织构及磁性能的影响

党宁，张文康，李志超，孙强

《金属热处理》

2016

含铜CGO硅钢高温退火过程中的织构演变规律

党宁，张文康，李志超，孙强

《金属热处理》

2016

CGO硅钢初次再结晶组织及织构演变规律

孙强，李志超，米振莉，党宁

《材料工程》

2016

0.20mm CGO硅钢高温退火Goss晶粒起源及异常长大行为研究

党宁，李志超，唐荻，张文康，孙强

《材料工程》

2016

无取向硅钢铸坯展宽研究

赤小浩，刘建华，李志超，李康伟

《铸造技术》

2016

W600无取向硅钢的动态相变对织构和析出相的影响

米振莉，孙强，李志超，林瑞民

《材料热处理学报》

2015

硅铝合金材料在不同凝固条件下凝固组织分析

李志超，卢印举

《铸造技术》

DOI

2014

GCr15钢连续冷却过程中的相变和组织演变

张小垒，李辉，徐士新，李志超，米振莉

《金属热处理》

2013

连续退火温度对高硅双相钢组织及性能影响

米振莉，段路昭，李志超，江海涛，代乐乐

《钢铁》

2013

不同焊接方法对TWIP钢焊后热影响区组织和性能的影响

米振莉，杨林，李志超，江海涛

《焊接学报》

2013

典型金属材料在淡化海水中的腐蚀性能

李超，李志超，吴恒，张波

《腐蚀与防护》

2012

控轧控冷TRIP钢的微观相组成及其与力学性能的关系

米振莉，陈美芳，李志超，江海涛，张明明

《工程科学学报》

2012

2000年以来取向硅钢的研究进展

李志超，唐荻，党宁，米振莉

《金属热处理》

2012

卷取温度对Ti-IF钢板组织及性能的影响

成小军，贾友生，李志超，彭伟，周春泉

《金属热处理》

2012

湿H2气氛下CGO硅钢初次再结晶织构演变行为

李志超，党宁，唐荻，米振莉，范东亮

《金属热处理》

精选作品

期刊论文

温轧压下率对临界退火中锰钢Lüders带形成与力学行为的影响

Accurate state of health estimation of lithium-ion batteries based on deep learning and polarization features

Effects of Annealing Temperature on the Microstructure and Mechanical Properties of Warm‐Rolled Advanced High‐Strength Twinning‐Induced Plasticity Steel

热基板Zn-Al-Mg镀层的组织与耐蚀性影响因素分析

厚规格热基无花镀锌板表面缺陷研究及控制

Tailoring Heterogeneous Austenite Stability via Rapid Heating in Medium‐Mn Steel: Enabling Discontinuous Sustained Transformation‐Induced Plasticity

典型特殊制备技术对无取向电工钢织构的影响规律

Experimental investigation and numerical analysis on pool boiling heat transfer of heated steel balls in deionized water

Research on the Dynamic Softening Mechanism of Dual‐Phase Structure During Warm Forming of Fe–8.5Mn–1.5Al Medium‐Manganese Steel

Thermal deformation behavior and microstructure evolution of Fe−8.5Mn−1.5Al light−weight medium manganese steel

Microstructure Evolution and Mechanical Properties of Light Medium Manganese Steel: Different Rolling Directions during Warm Stamping

Effect of Induction Quenching and Tempering Temperature on the Mechanical Properties and Microstructure Evolution of 45 Steel for Linear Guide

Experimental study of bubble behaviors and heat transfer coefficient on hot steel balls during deionized water pool boiling

Microstructure–Mechanical Property Relationship and Austenite Stability in Transformation-Induced Plasticity Steels: Effects of Quenching and Partitioning Processing and Quenching and Tempering Treatments

Effect of the Rate and Temperature of Hot Deformation on Strain Resistance of Duplex Stainless Steel

Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation

Effect of Q&P and Q&T Treatments on the Stability of Austenite and Mechanical Properties of Steel 0.2% C – 8.5% Mn – 3.0% Al

改善09MnNi容器钢低温冲击韧性的机理

Optimization of Induction Hardening for Sprocket Based on Numerical Simulation and Experiment Design

Research on the heat transfer characteristics of air-atomized water spray cooling by experiment and inverse heat conduction method

高锰钢高速压缩时γ→ε-M和ε-M→α′-M的相变特征

亚温淬火对09MnNiDR容器钢板组织及断裂性能的影响

Wetting layer evolution and interfacial heat transfer in water-air spray cooling process of hot metallic surface

Evaluation of interfacial heat transfer coefficient based on the experiment and numerical simulation in the air-cooling process

Elevation of Impact Toughness of Medium-Manganese Trip-Steel 0.2% C – 6% Mn – 3% Al Due to Evolution of Microstructure Under Heat Treatment

The significance of microstructural evolution on governing impact toughness of Fe-0.2C-6Mn-3Al medium-Mn TRIP steel studied by a novel heat treatment

低温容器用07MnNiMoDR钢的热处理优化

The Significance of Austenite/Ferrite/Martensite Ratio on Governing Impact Toughness of Fe-0.2C-6Mn-1.5Al Medium-Mn Transformation-Induced Plasticity Steel Studied by a Novel Heat Treatment

The Significance of Microstructure Evolution on Governing Impact Toughness of Fe–0.2C–8.5Mn–3Al Medium‐Mn TRIP Steel Studied by a Novel Heat Treatment

Design of an Effective Heat Treatment Involving Intercritical Hardening for High Strength/High Elongation of 0.2C–3Al–(6–8.5)Mn–Fe TRIP Steels: Microstructural Evolution and Deformation Behavior

Bonding of Zr44Ti11Cu10Ni10Be25 bulk metallic glass and AZ31B magnesium alloy by hot staking extrusion

Estimated temperature-dependent interfacial heat transfer coefficient during gas cooling based on firefly algorithm and finite element method

Analysis of Phase Transformation and Mechanical Properties of 55CrMo Steel during Induction Hardening

Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map

Effect of Ti substitution on the hardness and electrochemical property of laser clad Zr-Al-Co (Ti) amorphous-nanocrystalline coating

Effects of Heating and Quenching Processing Parameters on Phase Transformation of 55CrMo Steel

Evaluation of multi-objective inverse heat conduction problem based on particle swarm optimization algorithm, normal distribution and finite element method

Numerical simulation of hot blanking for boron steel B1500HS based on ductile fracture criterion

Estimation of interfacial heat transfer coefficient in inverse heat conduction problems based on artificial fish swarm algorithm

Fe-8/11Mn-4Al-0.2C钢的力学性能及应变硬化行为

Fabrication of Zr-based bulk metallic glass/aluminum alloy multi-materials by stacking extrusion

高温退火工艺对CGO硅钢Goss织构及磁性能的影响

含铜CGO硅钢高温退火过程中的织构演变规律

CGO硅钢初次再结晶组织及织构演变规律

0.20mm CGO硅钢高温退火Goss晶粒起源及异常长大行为研究

无取向硅钢铸坯展宽研究

W600无取向硅钢的动态相变对织构和析出相的影响

硅铝合金材料在不同凝固条件下凝固组织分析

GCr15钢连续冷却过程中的相变和组织演变

连续退火温度对高硅双相钢组织及性能影响

不同焊接方法对TWIP钢焊后热影响区组织和性能的影响

典型金属材料在淡化海水中的腐蚀性能

控轧控冷TRIP钢的微观相组成及其与力学性能的关系

2000年以来取向硅钢的研究进展

卷取温度对Ti-IF钢板组织及性能的影响

湿H2气氛下CGO硅钢初次再结晶织构演变行为

会议论文

退火温度对1.3% Si无取向硅钢成品板磁性能的影响

微观组织与织构特征对无取向硅最终成品板磁性能的影响

Ti微合金化Q345B的夹杂物分析

回火温度对马氏体合金钢性能和组织的影响

EBSD分析中伪对称性的影响及其克服

书籍章节

Superior strength-ductility synergy in lightweight medium-Mn steel with laminated heterogeneous microstructure