赵国群

2026

工业纯钛激光冲击温渐进成形实验研究

《中国激光》

2026

一种新型Al-Mg-Si-Cu-Mn合金的热变形行为及组织演变(英文)

Transactions of Nonferrous Metals Society of China

2026

Deformation mechanism and strain rate dependent constitutive model of cold-drawn 2A10 aluminum alloy

Journal of Alloys and Compounds

DOI

2026

Tailoring dual heterointerface structure in continuously extruded Al/steel/CF hybrid composites: Towards enhanced interfacial bonding performance

Composites Part B: Engineering

DOI

2026

Enhancing the ultrasonic welding stability of unidirectional and woven CF/LMPAEK composites through tailoring interfacial resin content

Composites Science And Technology

DOI

2026

Surface reshaping mechanism of 2024-T351 aluminum alloy in laser shock polishing

Optics & Laser Technology

DOI

2026

Significant Enhancement of Interfacial Strength of Overmolded CF/PEEK Components via Co-Consolidation with an LM-PAEK Interlayer

Composites Part B: Engineering

DOI

2026

Environmental Durability and Degradation Behavior of CF/PEI Adhesive Joints under Hygrothermal Aging and Aviation Fluid Exposure Conditions

Composites Science And Technology

DOI

2026

Thermo-forging CF/PPS rivet for joining CF/PEEK composite and TC4 titanium alloy structures

Composites Part B: Engineering

DOI

2026

Towards robust ultrasonic welding of CF/PEEK composite to aluminum hybrid joints

Composites Science And Technology

DOI

2026

Environmental durability and moisture diffusion behavior of co-cure bonded CF/epoxy-CF/LMPAEK hybrid joints

Composites Part B: Engineering

DOI

2026

Deformation behavior and failure mechanism under nonlinear continuous deformation path: an experimental and modeling study

International Journal of Plasticity

DOI

2026

Effects of Fe rust deposits on the corrosion behavior of Al-Zn-Mg-Cu alloy

Corrosion Science

DOI

2026

An asymmetric yield criterion for plasticity modeling of metal sheets considering shear and near-plane strain tension

Journal of Materials Research and Technology

DOI

2026

In-situ micropillar compression coupled with post-deformation TEM reveals local interphase deformation pathways associated with an interfacial transition zone in additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy

International Journal of Plasticity

DOI

2026

Grain-scale plastic deformation characteristics and corresponding local plasticity effects in Mg-Y-Nd-Zr-Gd alloys: A multi-strategy in situ experimental study

Journal of Magnesium and Alloys

DOI

2026

Corrigendum to “Strain-induced dynamic evolution of the T1 phase and its influence on recrystallization behavior” [Acta Materialia 308 (2026) 122032]

Acta Materialia

DOI

2026

Aging precipitation and corrosion resistance of peripheral coarse grained layer and matrix in Al-7.2Zn-1.9Mg-2Cu extruded profiles under multi-stage aging treatments

Materials & Design

DOI

2026

Numerical study on stress distribution and failure behavior in the riveted joint of CF/PEEK composite and 2A12 aluminum alloy

Composite Structures

DOI

2026

A new yield criterion for yield behavior modeling of lightweight alloy sheets in a wide stress state range

Acta Mechanica

DOI

2026

Linking extrusion-induced deformation heterogeneity to quenching sensitivity in Al-Li alloy extrusion profiles

Journal of Materials Processing Technology

DOI

2026

Tailoring phase transformation temperatures and functional properties through laser-based powder bed fusion: A pathway to functionally graded NiTi shape memory alloys

Additive manufacturing

DOI

2026

Mechanical degradation and corrosion behavior of low-frequency vibration assisted riveted CFRP/Al joints

Engineering Failure Analysis

DOI

2026

Ductility enhancement mechanism of stress-aged Al-Zn-Mg-Cu alloy considering the role of precipitation free zone

Journal of Material Science and Technology

DOI

2026

Microstructure and mechanical study of Al-Si3N4/ 6063 Al laminated composite fabricated by porthole die co-extrusion and forging

Materials Science and Engineering A

DOI

2026

Study on the reduction of quenching residual stress in 7055 aluminum alloy extruded profiles: Synergistic effect of pre-stretch and two-stage stress relaxation aging

Materials Today Communications

DOI

2026

Underlying mechanisms of deformation, microstructure and properties of ultra-high-strength 7034 aluminum alloy after rapid heating

Materials Science and Engineering A

DOI

2026

Surface engineering of carbon nanotubes via in-situ crosslinking: Tailoring rheology and crystallization for multifunctional PLA foams with ultrahigh expansion

Composites Part B Engineering

DOI

2026

Grain size dependent unloading anelastic behavior and multi-scale model of AA6061 aluminum alloy

Journal of Materials Research and Technology

DOI

2026

On the mechanism of plastic deformation and microstructure evolution of solution-treated 2050 Al-Li alloy subjected to rapid heating process

Journal of Alloys and Compounds

DOI

2026

Heterogeneous abnormal grain growth behaviors and corresponding deformation mechanisms of Mg alloy profile investigated through in-situ and quasi-in-situ characterizations

Acta Materialia

DOI

2026

Tension-driven large elastocaloric effect in laser-based powder bed fusion fabricated NiTi shape memory alloys

Scripta Materialia

DOI

2026

Synergistic enhancement effect of cryo-pre-straining and precipitation in mechanical properties of an Al–Cu–Li alloy by pre-ACR and ageing

Journal of Materials Research and Technology

DOI

2026

A flexible green strategy to prepare polytetrafluoroethylene nanofibrous membranes with tailored structure for high-performance filtration applications

Journal of Membrane Science

DOI

2026

Overcoming Strength-Ductility Trade-off in Fully Biodegradable Polylactic Acid/Elastomer Composites: Synergistic in Situ Topological Fibrillation and Supercritical CO 2 -Induced Nanocrystals

Macromolecules

DOI

2026

Thermoplastic polyurethane foams with sandwich gradient cellular structure derived by a novel prefoaming-assisted microcellular foaming strategy

Chemical Engineering Journal

DOI

2026

Strain-induced dynamic evolution of the T1 phase and its influence on recrystallization behavior

Acta Materialia

DOI

2026

Direct recycling of Al-Li alloy machining chips into sheets with excellent mechanical properties via a double-sided friction stir consolidation process

Journal of Materials Processing Technology

DOI

2026

In situ investigation of the activation characteristics of basal slip systems in Mg-Y-Nd-Zr-Gd alloy: From the perspective of Schmid's law and plasticity transfer

Journal of Magnesium and Alloys

DOI

2026

Heterogeneous precipitation evolution and dislocation accumulation in CNT/2024Al composites with dual heterostructure

International Journal of Plasticity

DOI

2026

Multifaceted Janus Textile Simultaneously Achieving Self-Sustainable Thermal Management, Perception, and Protection

Nano-Micro Letters

DOI

2026

Achieving Crack‐Free Laser Powder Bed Fusion of Al x FeCoCrNi Alloys With B2‐Decorated Substructures via Low‐Al In Situ Alloying

Rare Metals

DOI

2025

共固化阻尼薄膜夹嵌复合材料研究进展

《高分子材料科学与工程》

DOI

2025

科研成果转化为虚拟仿真实验的设计与实现

《实验科学与技术》

2025

嵌入式共接枝芳纶纤维增强羧基聚碳酸酯阻尼复合材料界面性能

《高分子学报》

2025

The development of advanced low‐melt polyaryl‐ether‐ketone (LM‐PAEK) composite adhesive joints with good hygrothermal and chemical resistance

Polymer Composites

DOI

2025

Ultrasonic Welding of Thermoplastic Composites with Woven Mesh Energy Directors: Enhanced Strength and Hygrothermal Resistance

Journal of Materials Research and Technology

DOI

2025

Optimized microstructure evolution and interfacial enhancement of the CF/Al composite fabricated by interfacial diffusion induced infiltration process

Journal of Alloys and Compounds

DOI

2025

Enhancing composite joint performance through co-cure joining with structured low-melt polyaryletherketone (LMPAEK) meshes

Thin-walled structures

DOI

2025

Enhancing the uniformity and strength of ultrasonically welded CF/epoxy-CF/PEI joints upon tailoring the structure of the energy director

Composites Part B: Engineering

DOI

2025

Eliminating the adverse effects of substrate misalignment in ultrasonic welding of CF/epoxy composites using structured energy directors

Journal of Materials Research and Technology

DOI

2025

Enhancing Ultrasonic Welding Joints of CF/PEEK Composites and Aluminum via Pre‐Deposition of a PEEK Layer Onto the Metal Substrate

Polymer Composites

DOI

2025

High-efficiency ultrasonic welding of CF/epoxy joints with enhanced strength upon tailoring the energy director structure

Composites. Part A, Applied science and manufacturing

DOI

2025

Enhancing welding-line uniformity and joint strength of ultrasonically welded CF/epoxy-CF/PEI hybrid joints using variable-flexibility energy directors

Journal of Manufacturing Processes

DOI

2025

An integrated stamp forming and injection overmolding process for thermoplastic composite components: Enhancing overmolding interface

Journal of Manufacturing Processes

DOI

2025

Corrigendum to “Enhancing the fracture toughness of aerospace-grade carbon fibre/epoxy composites by interlaying surface-activated low-melt polyaryletherketone (LMPAEK) meshes” [Composites Part B 287 (2024) 111824]

Composites Part B: Engineering

DOI

2025

Towards ultrasonic welding of robust thermoplastic composite joints without the use of energy directors

Composites Part B: Engineering

DOI

2025

Developments and future prospects of welding technology for carbon fiber thermoplastic composites

Composites Part B: Engineering

DOI

2025

In-situ reaction interface strengthening derived strong PLA/ESO/CNTs composites with outstanding photo-induced shape memory performance

Chemical Engineering Journal

DOI

2025

Quasi-in-situ investigation of heterogeneous recrystallization behavior in cryogenic multi-directional forged Al-Zn-Mg-Cu alloys

Materials Today Communications

DOI

2025

Exploring Impact of Die Structure on Peripheral Coarse Grain Formation and Mechanical Properties of 2195 Al–Cu–Li Alloy Extrusion Plates

Metallurgical and Materials Transactions A

DOI

2025

A novel pre-foaming strategy to manipulate carbon dioxide adsorption and desorption behavior for achieving low-density TPU foams

Journal of CO2 Utilization

DOI

2025

A novel synergistic enhancement for UHMWPE foam via HDPE homologous reinforcement and MWCNTs-induced “window-broken” effect for advanced biphasic separation and heating insulation

Advanced Composites and Hybrid Materials

DOI

2025

High‐Thermal Conductivity Aluminum Alloy Mold Inserts: Improving Injection Efficiency and Mechanical Properties of ABS Molded Parts

Polymers for Advanced Technologies

DOI

2025

Low-energy forest dislocation in dual-heterostructured CNT/2024Al composites and its effect on mechanical properties

International Journal of Plasticity

DOI

2025

Atomic Kinetic Monte Carlo Simulations Reveal Solute-Vacancy Dynamics in Aluminum and Their Governing Role in Precipitation Aging

Journal of Phase Equilibria and Diffusion

DOI

2025

Effects of Aluminum Alloy and Steel Molds on the Productivity, Mechanical Properties, and Surface Quality of Semicrystalline PP Molded Parts

ACS Applied Polymer Materials

DOI

2025

Lightweight and flexible poly(ether-mb-amide)/carbon fiber foam with manipulating microphase separation and sandwich structure for outstanding electromagnetic interference shielding application

Chemical Engineering Journal

DOI

2025

Ultra-expanded microcellular shape memory polymer foams via supercritical foaming for recyclable oil absorption and improved thermal insulation

Advanced Industrial and Engineering Polymer Research

DOI

2025

Formation and evolution mechanisms of the peripheral coarse-grain layer in Al-Zn-Mg-Cu alloy extrusion profile: Synergistic effects of strain, stored energy, and grain boundary

Journal of Material Science and Technology

DOI

2025

Tailored Electro–Magnetic–Porous Multigradient Nanoarchitectonics for Absorption‐Dominated Electromagnetic Interference Shielding and Adaptive Multifunctionality

Advanced Science

DOI

2025

Investigation on the effect of stress relaxation aging on the reduction of quenching residual stress in 7055 aluminum alloy profiles

Materials Characterization

DOI

2025

A through-process model for predicting the precipitation evolution and mechanical property of stress-aged Al-Zn-Mg-Cu alloy

International Journal of Plasticity

DOI

2025

Energy-saving low-frequency vibration-assisted riveting process for joining high-strength metallic structures with enhanced performance

Journal of Cleaner Production

DOI

2025

Heterogeneous strain-driven dynamic recrystallization behavior of Mg–Y-Nd-Zr-Gd alloy: A quasi in-situ investigation

Journal of Materials Research and Technology

DOI

2025

Atomic-Scale mechanisms of Lithium-Induced grain boundary embrittlement in aluminum alloys: A First-Principles study

Computational Materials Science

DOI

2025

Regulation of high-temperature microstructure evolution and recrystallization by pre-strain accumulation in Al–Zn–Mg–Cu alloys

Journal of Materials Research and Technology

DOI

2025

Regulating interface structure and shear performance of extruded NiTi fiber reinforced Al-based composites via heat treatments

Composites Part B Engineering

DOI

2025

Green construction of highly tunable micro-nano porous polymers based on polymethylmethacrylate /polyvinylidene fluoride self-assembly system and ultra-low pressure CO2 foaming

Journal of CO2 Utilization

DOI

2025

Novel multi-axis differential velocity sideways extrusion process for 3D curved profiles: Feasibility and forming mechanisms studies

International Journal of Machine Tools and Manufacture

DOI

2025

Design and optimization of cruciform tension and shear specimen for forming limit acquisition

Journal of Materials Processing Technology

DOI

2025

Pore‐Gradient, Flexible, and Fully‐Degradable Foam with Outstanding Noise Absorption and Thermal Insulation

Advanced Functional Materials

DOI

2025

Low cycle fatigue behavior and cyclic deformation mechanism of 2195 Al-Li alloy at low temperatures

Journal of Material Science and Technology

DOI

2025

Innovative crosslinking and foaming Strategies for Advancing biodegradable composite foams: Enhancing Foamability, Flexibility, and thermal insulation

Materials & Design

DOI

2025

Tailoring the transformation behavior and functionalities of NiTi alloy achieved by L‐PBF in‐situ alloying using NiTi and Ni powder mixture

Rare Metals

DOI

2025

Enhancing thermal stability of laser-powder bed fusion fabricated FeCoCrNi-Al alloy by introducing Al element segregation using in-situ alloying

Journal of Material Science and Technology

DOI

2025

Thermoplastic polyester elastomer foams with tailored morphology and mechanical performance achieved by manipulating microphase-separated structure

Chemical Engineering Journal

DOI

2025

Fatigue crack propagation behavior of 2195 Al-Li alloy plate at low temperature

International Journal of Fatigue

DOI

2025

Formation mechanism and prediction model for peripheral coarse grain of high-strength aluminum alloy thermoplastic forming component: A case study on 2195 Al-Li alloy extrusion profile

Journal of Materials Processing Technology

DOI

2025

Laser-Induced Superhydrophobic Polymer Surface for Droplet Manipulation, Controllable Light-Driven Actuator, and Underwater Motion Monitoring

ACS Applied Materials & Interfaces

DOI

2025

Multifunctional Janus-Structured Polytetrafluoroethylene-Carbon Nanotube-Fe3O4/MXene Membranes for Enhanced EMI Shielding and Thermal Management

Nano-Micro Letters

DOI

2025

Research on the anisotropy of microstructure, mechanical properties, and residual stress of 7055 aluminum alloy profile with complex section

Materials Characterization

DOI

2025

Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy

Materials Science and Engineering A

DOI

2025

Crevice–galvanic coupling corrosion behavior and mechanism of QC-10 aluminum alloy in chloride-containing solutions

Journal of Material Science and Technology

DOI

2025

A robust modeling framework for predicting nanovoid structures and energetics in FCC metals

Acta Materialia

DOI

2025

Recent progress in functional applications of polymer foams

Journal of Materials Chemistry A

DOI

2025

In-situ tailoring the microstructure and properties of dual phase high entropy alloys with molten pool element mixing modulation by altering laser parameters in laser-powder bed fusion

Additive manufacturing

DOI

2024

铝合金型材挤压弯曲一体化成形技术研究进展

《塑性工程学报》

2024

中国塑性成形技术和装备30年的重大突破与进展

《塑性工程学报》

2024

热塑性聚合物微孔发泡原理与技术

《科学出版社》

2024

基于冷喷涂工艺的Mg-Zn-Al-Sn-Mn合金防腐Al涂层制备（英文）

Transactions of Nonferrous Metals Society of China

2024

铝中小空位团簇稳定性的第一性原理研究（英文）

Transactions of Nonferrous Metals Society of China

2024

产学研融合的快速热循环注塑虚拟仿真实验教学课程建设与实践

《高分子通报》

2024

Ultrasonic welding of CF/epoxy‐CF/PEI joints with enhanced vibration transfer efficiency and optimized welding quality

Polymer Composites

DOI

2024

Significantly enhanced joint strength and fatigue life of aerospace composite joints by using novel PEEK/PPS woven meshes as joining agent

Thin-walled structures

DOI

2024

Effects of welding displacement and energy director thickness on the ultrasonic welding of epoxy-to-polyetherimide based hybrid composite joints

Composites Science And Technology

DOI

2024

Robust ultrasonically welded CF/PEI-CF/epoxy composite joints upon tailoring the thermoplastic resin thickness at the welding interface

Thin-walled structures

DOI

2024

Enhancing the fracture toughness of aerospace-grade carbon fibre/epoxy composites by interlaying surface-activated low-melt polyaryletherketone (LMPAEK) meshes

Composites Part B: Engineering

DOI

2024

Realizing ultrahigh strength and excellent stability of ultrasonically welded joints upon co-consolidating an extra resin layer (eRL) on the thermoplastic composites

Composites. Part A, Applied science and manufacturing

DOI

2024

Microstructure evolution and enhanced mechanical properties of CF/Mg composites with optimized fiber/matrix interfacial adhesion

Composites Part B: Engineering

DOI

2024

Advances and Future Prospects of Adhesive Bonding and Co-Consolidation Technologies for Aviation Carbon Fiber Thermoplastic Composites

Applied Composite Materials

DOI

2024

An efficient pre-foamed method to fabricate low density poly(ether-block-amide) foams

Journal of CO2 Utilization

DOI

2024

In-situ investigation of slip system activation, intergranular plasticity transfer, and deformation heterogeneity of Al-Zn-Mg-Cu alloy

Materials Science and Engineering A

DOI

2024

Cryogenic deformation behavior, constitutive modeling and microstructure evolution of solution-treated 2195 Al–Li alloy at high strain rates

Journal of Materials Research and Technology

DOI

2024

Deformation behavior, constitutive modeling and microstructure evolution of 2195 Al-Li alloy deformed at high strain rates and cryogenic temperatures

Materials & Design

DOI

2024

Advanced fabrication of ultra-high molecular weight polyethylene/ graphite nanoplates foam for enhanced oil–water separation and thermal insulation via a novel omnidirectional gas escape barrier mechanism

Chemical Engineering Journal

DOI

2024

Energetic and structural stability of vacancy clusters in Al under external stress conditions

Computational Materials Science

DOI

2024

Effect of cumulative plastic deformation on microstructure and strengthening mechanism of extruded Al-Zn-Mg-Cu alloy

Vacuum

DOI

2024

A novel in-situ fibrillation enhancement strategy to achieve super-elastic green foam with enhanced biodegradation

Journal of environmental chemical engineering

DOI

2024

Porous and Conductive Fiber Woven Textile for Multi‐Functional Protection, Personal Warmth, and Intelligent Motion/Temperature Perception

Advanced Functional Materials

DOI

2024

Cellulose nanofibers enabled strong and flexible plant-derived thermoplastic polyester elastomer foams for high-performance thermally insulating applications

International Journal of Biological Macromolecules

DOI

2024

Microcellular foaming-derived strong ultra-high molecular weight polyethylene/high-density polyethylene foams for thermally insulating and oil-water separating applications

Journal of environmental chemical engineering

DOI

2024

Hierarchical modification of bimodal grain structure in Al/Ti laminated composites for extraordinary strength-ductility synergy

Composites Part A Applied Science and Manufacturing

DOI

2024

Poly(caprolactone) Enabled Ultralight and Recyclable Poly(butylene adipate-co-terephthalate) Foams for Thermal Insulation Application

ACS Sustainable Chemistry & Engineering

DOI

2024

Chirality hierarchical transfer in homochiral polymer crystallization under high-pressure CO2

Nature Communications

DOI

2024

Investigation of constitutive models and microstructure evolution during hot deformation and solution treatment of Al–Zn–Mg–Cu alloy

Journal of Materials Research and Technology

DOI

2024

Flexible, Reliable, and Lightweight Multiwalled Carbon Nanotube/Polytetrafluoroethylene Membranes with Dual‐Nanofibrous Structure for Outstanding EMI Shielding and Multifunctional Applications (Small 24/2024)

Small

DOI

2024

Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling

International Journal of Plasticity

DOI

2024

Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding

International Journal of Plasticity

DOI

2024

Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy

Composites Part B Engineering

DOI

2024

Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles

Journal of Magnesium and Alloys

DOI

2024

Ultrafast-degradable and super-elastic PBAT/polybutylene succinate foam with stable cellular structure and enhanced thermal insulation

European Polymer Journal

DOI

2024

Microstructure characterization and solid welding mechanism of TiB2/6061Al composite profile fabricated by porthole die extrusion

Materials Characterization

DOI

2024

Effect of solution treatment on the microstructure, phase transformation behavior and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

International Journal of Extreme Manufacturing

DOI

2024

Low-frequency vibration assisted self-pierce riveting (LV-SPR) of carbon fiber reinforced composite and aluminum alloy

International Journal of Machine Tools and Manufacture

DOI

2024

Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys

International Journal of Plasticity

DOI

2024

Superhydrophobic nanofibrous polytetrafluoroethylene and composite membranes with tunable adhesion for micro-droplet manipulation, self-cleaning and oil/water separation

Journal of environmental chemical engineering

DOI

2024

First-principles study of stability of small vacancy clusters in aluminum

Transactions of Nonferrous Metals Society of China

DOI

2024

Tailoring the microstructure of Al/Ti laminated composite through hot press sintering process to achieve superior mechanical properties

Journal of Materials Processing Technology

DOI

2024

A method for fabricating polyvinylidene fluoride/poly methyl methacrylate/graphite nanoplates nanocomposites foams with high strength, large expansion ratio and outstanding heat insulation properties

Carbon

DOI

2024

Effects of strain and strain rate on dynamic recrystallization and solid-state welding behaviors of aluminum alloys

Journal of Materials Research and Technology

DOI

2024

A unified physically-based model describing complex unloading behavior in cold and hot deformation process of aluminum alloys

European Journal of Mechanics - A/Solids

DOI

2024

Super‐Elastic and Dimensionally Stable Polyether Block Amide Foams Fabricated by Microcellular Foaming with CO2&N2 as Co‐Blowing Agents

Macromolecular Materials and Engineering

DOI

2024

Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites

Journal of Materials Processing Technology

DOI

2024

Optimization design of porthole die and study on microstructures and mechanical properties for an Al–Li alloy hollow profile

Journal of Materials Research and Technology

DOI

2024

Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion

Thin-Walled Structures

DOI

2024

Flexible, Reliable, and Lightweight Multiwalled Carbon Nanotube/Polytetrafluoroethylene Membranes with Dual‐Nanofibrous Structure for Outstanding EMI Shielding and Multifunctional Applications

Small

DOI

2023

某铝合金T型材双模孔反向挤压变形分析及模孔位置优化

《锻压技术》

2023

一种盘式铝合金汽车轮毂锻造工艺设计及锻件组织力学性能分析

《塑性工程学报》

2023

超临界二氧化碳间歇式发泡工艺制备原位微纤增强聚丙烯泡沫

《高分子材料科学与工程》

2023

多向锻造对Al-Zn-Mg-Cu合金缺陷消除及微观组织的影响

《机械工程学报》

2023

一种新的耦合GTN模型以精确识别金属板料极限应变的三维M-K模型（英文）

Transactions of Nonferrous Metals Society of China

2023

2195铝锂合金的温热低周疲劳行为和疲劳寿命预测（英文）

Transactions of Nonferrous Metals Society of China

2023

“虚实结合”的锻造工艺实验设计与实践

《实验室科学》

2023

Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression: A quasi-in-situ study

Journal of Materials Science & Technology

DOI

2023

Strengthening and toughening mechanisms of tailored Al/Al-TiB2 laminated composites fabricated by hot press sintering process

Journal of Materials Processing Technology

DOI

2023

Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique

Materials & Design

DOI

2023

Deformation mechanism of as-extruded Al–Cu–Li alloy with heterogeneous fiber structure

Materials & Design

DOI

2023

Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure

Journal of Materials Research and Technology

DOI

2023

Suppressing abnormal grain growth and switching precipitation behaviors in ZK60 Mg profile by inducing pre-tension

Journal of Materials Science & Technology

DOI

2023

Nonlinear unloading-reloading behavior and macro/micro models during multi-pass cyclic hot compression of aluminum alloys

Materials Science & Engineering: A

DOI

2023

Experimental studies and modeling of strain rate- and temperature-dependent springback behavior of hot-deformed aluminum alloys

Journal of Materials Processing Technology

DOI

2023

Abnormal grain growth behavior and mechanism of 6005A aluminum alloy extrusion profile

Journal of Materials Science & Technology

DOI

2023

Investigation of microstructure evolution and mechanical properties of 2A10 aluminum alloy during ultrasonic vibration plastic forming

Journal of Materials Research and Technology

DOI

2023

A strategy to promote formability, production efficiency and mechanical properties of Al-Mg-Si alloy

Journal of Materials Research and Technology

DOI

2023

Microstructure and mechanical properties of longitudinal weld in 6005A aluminum alloy profile extruded by a porthole die

Journal of Materials Research and Technology

DOI

2023

The synergistic and interactive effects of slip systems and dynamic recrystallization on the weakening basal texture of Mg-Y-Nd-Zr-Gd magnesium alloy

Materials & Design

DOI

2023

Fabrication of Al/Al-TiB2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior

Journal of Manufacturing Processes

DOI

2023

Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites

Materials Characterization

DOI

2023

Effect of strain and dispersoids on abnormal grain growth, precipitation behavior and mechanical properties at longitudinal weld in Al-Li alloy profile

Journal of Materials Processing Technology

DOI

2023

Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy

Journal of Materials Research and Technology

DOI

2023

Enhanced interfacial microstructure evolution and mechanical properties of CF/Al–Mg composites with optimal interconnected coating

Journal of Materials Research and Technology

DOI

2023

A novel micro-rolling & incremental sheet forming hybrid process: Deformation behavior and microstructure evolution

Chinese Journal of Aeronautics

DOI

2023

The formation mechanisms and mechanical effects of lattice defects in carbon nanotube reinforced 2024Al composite

Composites Part B Engineering

DOI

2023

Hot deformation behavior and microstructure evolution model of 7055 aluminum alloy

Journal of Materials Research and Technology

DOI

2023

Effects of multi-directional forging on the microstructure and mechanical properties of TiB2 particulate reinforced 6061Al composite

Journal of Materials Research and Technology

DOI

2023

Robust, breathable, and chemical-resistant polytetrafluoroethylene (PTFE) films achieved by novel in-situ fibrillation strategy for high-performance triboelectric nanogenerators

Nano Research

DOI

2023

Environmentally-friendly, sustainable ScCO2-assisted fabrication of poly (lactic acid)/ramie fiber composite foams

Journal of Cleaner Production

DOI

2023

A new microcellular foaming strategy to develop structure-gradient thermoplastic polyurethane foams with enhanced elasticity

Materials & Design

DOI

2023

Real-microcellular poly(ether-block-amide)/carbon fiber foams with improved mechanical property and surface quality for high-performance electromagnetic interference shielding applications

Journal of Materials Research and Technology

DOI

2023

Low cycle fatigue behavior and fatigue life prediction of 2195 Al-Li alloy at warm temperatures

Transactions of Nonferrous Metals Society of China

DOI

2023

A novel macro-micro integrated incremental sheet forming process for fabricating parts with functional surface microfeatures

Journal of Materials Processing Technology

DOI

2023

High performance plant-derived thermoplastic polyester elastomer foams achieved by manipulating charging order of mixed blowing agents

International Journal of Biological Macromolecules

DOI

2023

Carbon fibre composite joints co-cured by advanced PEEK/PPS meshes with outstanding fracture toughness

Composites Science and Technology

DOI

2023

Study of the microstructure, foaming property and cyclic compression performance of poly(ether-block-amide) foams fabricated by supercritical CO2 foaming

The Journal of Supercritical Fluids

DOI

2023

High-elastic and strong hexamethylene diisocyanate (HDI)-based thermoplastic polyurethane foams derived by microcellular foaming with co-blowing agents

Journal of CO2 Utilization

DOI

2023

A novel three-dimensional M-K model by integrating GTN model for accurately identifying limit strains of sheet metal

Transactions of Nonferrous Metals Society of China

DOI

2023

Mechanically strong and heat-resistant waste poly (ethylene terephthalate) derived by carbon dioxide treatment at ambient temperature

Journal of Materials Research and Technology

DOI

2023

Structure-tunable poly(butylene adipate-co-terephthalate) foams with enhanced mechanical performance derived by microcellular foaming with carbon dioxide as blowing agents

Journal of CO2 Utilization

DOI

2023

Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion

Composites Science and Technology

DOI

2023

Combined effects of nanoparticle and stretch‐induced orientation on crystal structure and properties of UHMWPE / TiO2 composite microporous membranes

Polymer Composites

DOI

2023

Size effect on the microstructure, phase transformation behavior, and mechanical properties of NiTi shape memory alloys fabricated by laser powder bed fusion

Journal of Material Science and Technology

DOI

2023

Mechanical properties and structure of injection molded poly(hydroxybutyrate‐co‐hydroxyvalerate)/poly(butylene adipate‐co‐terephthalate) ( PHBV / PBAT ) blends

Journal of Applied Polymer Science

DOI

2023

On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Thin-Walled Structures

DOI

2023

Robust polytetrafluoroethylene (PTFE) nanofibrous membrane achieved by shear-induced in-situ fibrillation for fast oil/water separation and solid removal in harsh solvents

Chemical Engineering Journal

DOI

2023

The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics

Composites Communications

DOI

2023

Enhanced mechanical property of continuous carbon fiber/polyamide thermoplastic composites by combinational treatments of carbon fiber fabric

Composites Communications

DOI

2023

Citric acid modified semi-embedded silver nanowires/colorless polyimide transparent conductive substrates for efficient flexible perovskite solar cells

RSC Advances

DOI

2023

Investigation on hot deformation behavior and quenching precipitation mechanism of 2195 Al-Li alloy

Materials & Design

DOI

2023

A strain rate and temperature dependent model for describing nonlinear unloading stress-strain response after warm and hot compression deformation

Journal of Materials Processing Technology

DOI

2023

Study on the precipitation behavior of the hot deformed 2195 Al–Li alloy after online quenching and its relation to the age-hardening response

Vacuum

DOI

2023

Microcellular foaming enabled nanoporous thermoplastic polyurethane/multi-walled carbon nanotubes composites with enhanced electromagnetic interface shielding and mechanical performance

The Journal of Supercritical Fluids

DOI

2023

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties

Additive manufacturing

DOI

2022

科教融合建设挤压成形虚拟仿真“金课”的探索与实践

《中国多媒体与网络教学学报(上旬刊)》

2022

激光选区熔化2024改性AlSi10Mg合金

《中国有色金属学报》

2022

基于拓扑优化的锻造预成形设计研究

《塑性工程学报》

2022

铸态2196铝锂合金均匀化处理工艺

《塑性工程学报》

2022

材料成型及控制工程《专业实验》课程思政建设探索

《中国多媒体与网络教学学报(上旬刊)》

2022

互联网+背景下面向材料类复合型人才培养的实验教学改革与实践

《中国多媒体与网络教学学报(上旬刊)》

2022

高等工程教育虚拟仿真实验教学的分析与思考——基于278项国家级虚拟仿真实验教学项目的描述性研究

《实验技术与管理》

2022

Precipitation behavior and quenching sensitivity of 2196 Al-Li alloy extrusion profile

Journal of Materials Research and Technology

DOI

2022

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

Journal of Materials Processing Technology

DOI

2022

Effects of billet heating temperature and extrusion speed on the microstructures and mechanical properties of the longitudinal welds in aluminum alloy profiles with complex cross-section

Vacuum

DOI

2022

Modeling and optimization of laser shock hole-clinching using response surface methodology and genetic algorithm

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes

Journal of Materials Processing Technology

DOI

2022

Super-elastic and structure-tunable poly(ether-block-amide) foams achieved by microcellular foaming

Journal of CO2 Utilization

DOI

2022

Fabricating micro-dent on the surface of ultrafine-grained pure copper by laser-induced shock wave and its deformation behavior

The International Journal of Advanced Manufacturing Technology

DOI

2022

Ultra-elastic and super-insulating biomass PEBA nanoporous foams achieved by combining in-situ fibrillation with microcellular foaming

Journal of CO2 Utilization

DOI

2022

The development of high performance hybrid joints between epoxy composites and PEEK/PPS composites: The mode-II and mix mode-I/II fracture behaviour

Composite structures

DOI

2022

Experimental Study and Optimization on Solution and Artificial Aging of Cold-Rolled 2024 Al Alloy Sheet

Journal of materials engineering and performance (Print)

DOI

2022

Ultra-ductile and strong in-situ fibrillated PLA/PTFE nanocomposites with outstanding heat resistance derived by CO2 treatment

Composites. Part A, Applied science and manufacturing

DOI

2022

Microstructure and mechanical properties of Al0.3FeCoCrNi high entropy alloy processed by laser powder bed fusion using FeCoCrNi and Al powder mixture

Materials Science & Engineering: A

DOI

2022

Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy

Materials Science & Engineering: A

DOI

2022

Mechanical properties and microstructural evolution of the spray formed 2195 Al-Li alloy extruded sheet at warm temperatures

Journal of Materials Research and Technology

DOI

2022

Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite

Materials Science & Engineering: A

DOI

2022

Springback Behavior and Nonlinear Springback Models of Aluminum Alloys Under Hot Compressive Deformation

Social Science Research Network

DOI

2022

Cracking behavior and prediction criterion of spray-deposited 2195 Al–Li alloy extrusion profile

The International Journal of Advanced Manufacturing Technology

DOI

2022

Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy

Materials & Design

DOI

2022

Recycled carbon fibre mats for interlayer toughening of carbon fibre/epoxy composites

Materials & Design

DOI

2022

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

International journal of plasticity

DOI

2022

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p+TiB2p)/6061Al hybrid composite

Materials & Design

DOI

2022

Enhanced Foaming Behavior and Foam Mechanical Properties of Pmma by Compounding with Miscible Pla

Social Science Research Network

DOI

2022

On the fracture behaviour of aerospace-grade Polyether-ether-ketone composite-to-aluminium adhesive joints

Composites Communications

DOI

2022

Co-curing bonding of carbon fibre/epoxy composite joints with excellent structure integrity using carbon fibre/PEEK tapes

Composites Science And Technology

DOI

2022

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

Materials Science & Engineering: A

DOI

2022

Lightweight and strong polypropylene/talc/polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming

Materials & Design

DOI

2022

Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld

Journal of Magnesium and Alloys

DOI

2022

Microcellular injection molded lightweight, strong and thermally insulating PP/fibrillated-PTFE composite foams with enhanced surface appearance

Journal of Materials Research and Technology

DOI

2022

Development of ultralight, tough and hydrophobic polymethylmethacrylate/polyvinylidene fluoride shape memory foams for heat insulation applications

Materials & Design

DOI

2022

Fabrication, Optimization, and Mechanism Analysis of Graphene/Hexagonal Boron Nitride Stacked Film

METALLOFIZIKA I NOVEISHIE TEKHNOLOGII

DOI

2022

Die design and process optimization for aluminum flat tube profile with offset small channel

IOP Conference Series Materials Science and Engineering

DOI

2022

Micro/nano dual-scale porous surface structure of the Al alloys and improvement on the joint strength with carbon fiber reinforced PA 6 thermoplastic

Composites Part B Engineering

DOI

2022

Corrugated thermoplastic polyurethane foams with high mechanical strength fabricated by integrating fused filament fabrication and microcellular foaming using supercritical CO2

Journal of CO2 Utilization

DOI

2022

On the interlayer toughening of carbon fibre/epoxy composites using surface-activated ultra-thin PEEK films

Composite Structures

DOI

2022

Effect of Fe addition on the microstructure, transformation behaviour and superelasticity of NiTi alloys fabricated by laser powder bed fusion

Virtual and Physical Prototyping

DOI

2022

Research on the cyclic compression performance of polycarbonate-based thermoplastic polyurethane foams prepared by microcellular foaming

Journal of CO2 Utilization

DOI

2022

Co-cured carbon fibre/epoxy composite joints by advanced thermoplastic films with excellent structural integrity and thermal resistance

International Journal of Adhesion and Adhesives

DOI

2022

Interfacial bonding mechanism and length evaluation method of the longitudinal welds in the unsteady deformation process of porthole die extrusion of aluminum alloy profiles

Journal of Materials Research and Technology

DOI

2022

Lightweight, low-shrinkage and high elastic poly(butylene adipate-co-terephthalate) foams achieved by microcellular foaming using N2 & CO2 as co-blowing agents

Journal of CO2 Utilization

DOI

2022

Ultralight and hydrophobic PVDF/PMMA open-cell foams with outstanding heat-insulation and oil-adsorption performances fabricated by CO2 molten foaming

Journal of CO2 Utilization

DOI

2022

On the mix-mode fracture of carbon fibre/epoxy composites interleaved with various thermoplastic veils

Composites Communications

DOI

2022

Microcellular injection molded lightweight and tough poly (L-lactic acid)/in-situ polytetrafluoroethylene nanocomposite foams with enhanced surface quality and thermally-insulating performance

International Journal of Biological Macromolecules

DOI

2022

Structure-gradient thermoplastic polyurethane foams with enhanced resilience derived by microcellular foaming

The Journal of Supercritical Fluids

DOI

2022

Anti-shrinkage, high-elastic, and strong thermoplastic polyester elastomer foams fabricated by microcellular foaming with CO2 & N2 as blowing agents

Journal of CO2 Utilization

DOI

2022

Miscible polymethyl methacrylate/polylactide blend with enhanced foaming behavior and foam mechanical properties

Journal of CO2 Utilization

DOI

2022

Fabrication of Microcellular Injection‐Molded Polypropylene with Super High Expansion Ratio by Precision Mold Opening Technology

Macromolecular Materials and Engineering

DOI

2022

Strong PP/PTFE microfibril reinforced composites achieved by enhanced crystallization under CO2 environment

Polymer Testing

DOI

2022

Ultra-light, super-insulating, and strong polystyrene/carbon nanofiber nanocomposite foams fabricated by microcellular foaming

European Polymer Journal

DOI

2022

Surface treatment of multiwalled carbon nanotubes and the formation of the multiscale conductivity network in long carbon fiber reinforced polypropylene

Polymer Composites

DOI

2022

Flame‐retardant, thermal and mechanical properties of PLA /ramie fiber composites

Polymer Composites

DOI

2022

Effects of welding angle on microstructure and mechanical properties of longitudinal weld in 6063 aluminum alloy extrusion profiles

Journal of Materials Research and Technology

DOI

2021

固溶工艺对7055铝合金组织和性能的影响

《中南大学学报(自然科学版)》

2021

高压共轨锻件预制坯的形状优化设计

《锻压技术》

2021

单级和多级固溶处理对7055铝合金螺旋面型材显微组织和性能的影响（英文）

Transactions of Nonferrous Metals Society of China

2021

“三融合”构建汽车覆盖件成形实验教学平台的研究与实践

《实验科学与技术》

2021

基于工程能力全过程培养的锻造成形综合实验设计与实践

《实验科学与技术》

2021

基于工程教育专业认证的锻造缺陷分析虚拟仿真实验设计与实践

《实验室科学》

2021

科教融合建设优质虚拟仿真实验教学项目探索

《实验室科学》

2021

基于雨课堂的虚拟仿真实验教学模式设计与实践

《实验室研究与探索》

DOI

2021

工科科研实验室安全生产保障体系的构建与实施

《实验室科学》

2021

基于SolidWorks的跟踪剪切机虚拟仿真设计系统的开发与应用

《实验技术与管理》

DOI

2021

Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments

Journal of Alloys and Compounds

DOI

2021

Influence of strain, temperature, and strain rate on interfacial structure and strength of AZ31BMg/6063Al formed by plastic deformation bonding

DOI

2021

Classification and variation of fracture modes in laser shock hole-clinching

The International Journal of Advanced Manufacturing Technology

DOI

2021

Effects of solution and aging treatments on the microstructure and mechanical properties of cold rolled 2024 Al alloy sheet

DOI

2021

Precipitation Behavior and Strengthening Mechanism of Extruded 2196 Al-Cu-Li Alloy Plate during Multi-Step Age-Hardening Treatment

Journal of materials engineering and performance (Print)

DOI

2021

Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures

Composites Part B: Engineering

DOI

2021

Strengthening mechanism and anisotropy of mechanical properties of Si3N4p/Al-Mg-Si composites fabricated by sintering and extrusion

Materials & Design (1980-2015)

DOI

2021

Strong breathable membrane with excellent self‐cleaning, wave‐transparent, and heat dissipation performances

Journal of Applied Polymer Science

DOI

2021

Control of the structure and composition of nitrogen-doped carbon nanofoams derived from CO2 foamed polyacrylonitrile as anodes for high-performance potassium-ion batteries

DOI

2021

Nanocellular poly(ether-block-amide)/MWCNT nanocomposite films fabricated by stretching-assisted microcellular foaming for high-performance EMI shielding applications

DOI

2021

Facile Fabrication of Amphiphilic and Asymmetric Films with Excellent Deformability for Efficient and Stable Adsorption Applications

DOI

2021

Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends

The International Journal of Advanced Manufacturing Technology

DOI

2021

Biodegradable PLA/PBS open-cell foam fabricated by supercritical CO2 foaming for selective oil-adsorption

DOI

2021

Assessment of critical parameters on joint forming quality in laser shock hole-clinching based on finite element analysis

The International Journal of Advanced Manufacturing Technology

DOI

2021

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Composites Part B: Engineering

DOI

2021

Lightweight and strong glass fiber reinforced polypropylene composite foams achieved by mold-opening microcellular injection molding

DOI

2021

Design and multi‐objective optimization of the bumper beams prepared in long glass fiber‐reinforced polypropylene

Polymer Composites

DOI

2021

Numerical and experimental study on extrusion of ZK60 Mg alloy using billet with temperature gradient

DOI

2021

Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy

DOI

2021

Investigation on the α/δ Crystal Transition of Poly(l-lactic Acid) with Different Molecular Weights

Polymers

DOI

2021

Effect of the compatilizer and chemical treatments on the performance of poly(lactic acid)/ramie fiber composites

DOI

2021

Nonlinear anelastic behavior and unloading-reloading constitutive models of severe plastic compressive deformation

DOI

2021

Lightweight and flexible poly(ether-block-amide)/multiwalled carbon nanotube composites with porous structure and segregated conductive networks for electromagnetic shielding applications

DOI

2021

Fatigue delamination behaviour of carbon fibre/epoxy composites interleaved with thermoplastic veils

Composite structures

DOI

2021

Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment

DOI

2021

Microcellular PLA/PMMA foam fabricated by CO2 foaming with outstanding shape-memory performance

Journal of CO2 Utilization

DOI

2021

Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding

DOI

2021

Evaluation of friction reduction and frictionless stress in ultrasonic vibration forming process

DOI

2021

Anomalous stress-strain behavior of NiTi shape memory alloy close to the border of superelastic window

DOI

2021

An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet

Journal of materials engineering and performance (Print)

DOI

2021

Nanocellular TPU composite foams achieved by stretch-assisted microcellular foaming with low-pressure gaseous CO2 as blowing agent

Journal of CO2 Utilization

DOI

2021

Poly(ether‐block‐amide) membrane with deformability and adjustable surface hydrophilicity for water purification

Polymer Engineering and Science

DOI

2021

Fibrosis mechanism, crystallization behavior and mechanical properties of in-situ fibrillary PTFE reinforced PP composites

Materials & Design (1980-2015)

DOI

2021

Supercritical CO2 foaming strategy to fabricate nitrogen/oxygen co-doped bi-continuous nanoporous carbon scaffold for high-performance potassium-ion storage

DOI

2021

Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing

DOI

2021

Super High‐Expansion Poly(Lactic Acid) Foams with Excellent Oil‐Adsorption and Thermal‐Insulation Properties Fabricated by Supercritical CO2 Foaming

Advanced Sustainable Systems

DOI

2021

How does the pulsed laser turn into ‘force’?

DOI

2021

Atomistic simulation of microstructure evolution of NiTi single crystals in bending deformation

DOI

2021

Microstructure characterization and corrosion behavior of hollow ZK60 Mg profile containing longitudinal welds

Corrosion Science

DOI

2021

Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile

Journal of Materials Processing Technology

DOI

2021

Anisotropic springback models of FCC metal material under severe plastic compressive deformation

International Journal of Mechanical Sciences

DOI

2021

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Materials Science & Engineering: A

DOI

2021

Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization

DOI

2021

Meshless analysis of bi-directional functionally graded beam structures based on physical neutral surface

DOI

2021

3D hybrid mesh generation with an improved vertical stretch algorithm for geometric models with pinch-out features

Computational Geosciences

DOI

2021

Efficient thermomechanical analysis of functionally graded structures using the symmetric SPH method

DOI

2021

Lightweight, strong, flame-retardant PVDF/PMMA microcellular foams for thermal insulation fabricated by supercritical CO2 foaming

Composites Part B: Engineering

DOI

2021

Effects of abnormal grain growth at longitudinal weld on the aging behavior and mechanical properties of 2196 Al Cu Li alloy profile

DOI

2021

Relationship between pulsed laser energy and fracture mode in multiple-pulse laser shock bulging process

The International Journal of Advanced Manufacturing Technology

DOI

2021

Effects of re-solution and re-aging treatment on mechanical property, corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy

DOI

2021

Springback behavior and a new chord modulus model of copper alloy during severe plastic compressive deformation

DOI

2021

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Materials Characterization

DOI

2021

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Materials Science and Engineering A

DOI

2021

Effects of single- and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile

Transactions of Nonferrous Metals Society of China

DOI

2021

Effect of extrusion parameters on microstructure, texture and mechanical property anisotropy of spray deposited 2195 Al–Li alloy profile

Materials Science and Engineering A

DOI

2020

面向生产全过程的金属板料冲压成形综合实验设计与教学实践

《实验室研究与探索》

2020

人工时效对2A12铝板力学性能和强化相的影响

《金属学报》

2020

中间退火对Al-Mg-Si系铝合金汽车板组织和性能的影响

《金属热处理》

DOI

2020

变模温与型腔气体反压辅助微孔发泡注塑技术及其产品内外泡孔结构演变

《高分子材料科学与工程》

DOI

2020

产学研协同的塑料改性、加工与性能测试一体化综合实验设计与实践

《实验室研究与探索》

2020

“新工科”建设背景下传统工科专业实验教学改革探索——以材料成型及控制工程专业为例

《教育教学论坛》

2020

基于雨课堂和BOPPPS模型的有效教学模式探索——以“材料物理化学”课程为例

《高等工程教育研究》

2020

Numerical Simulation and Parameter Study of Radial Forging of Conical Tube

DOI

2020

Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding

Chemical Engineering Journal

DOI

2020

Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy

Journal of Materials Research and Technology

DOI

2020

Green fabrication method of layered and open-cell polylactide foams for oil-sorption via pre-crystallization and supercritical CO2-induced melting

DOI

2020

Controllable Phosphorylation Strategy for Free-Standing Phosphorus/Nitrogen Co-Functionalized Porous Carbon Monoliths as High-Performance Potassium Ion Battery Anodes.

ACS Nano

DOI

2020

Effects of heat treatment on the microstructure, texture and mechanical property anisotropy of extruded 2196 Al-Cu-Li alloy

Journal of Alloys and Compounds

DOI

2020

Effects of Pre-stretching and Aging Treatments on Microstructure, Mechanical Properties, and Corrosion Behavior of Spray-Formed Al-Li Alloy 2195

Journal of materials engineering and performance (Print)

DOI

2020

Hot Extrusion Processing of Al–Li Alloy Profiles and Related Issues: A Review

DOI

2020

Fabrication of high porosity Nanocellular polymer foams based on PMMA/PVDF blends

DOI

2020

Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy

DOI

2020

Influence of process parameters on forming quality of Cu-Fe joints by laser shock hole-clinching

The International Journal of Advanced Manufacturing Technology

DOI

2020

Modeling and simulation for the investigation of polymer film casting process using finite element method

Mathematics and Computers in Simulation

DOI

2020

Investigation on microstructure and mechanical properties of in-situ TiB2/Al–Cu–Mg composite profile fabricated by porthole die extrusion

Materials Science & Engineering: A

DOI

2020

Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process

DOI

2020

Investigation on the influence of fold conformation on PLLA lamellar splaying by film crystallization in supercritical CO2

DOI

2020

Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling

Materials Characterization

DOI

2020

Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die

Materials Characterization

DOI

2020

WITHDRAWN: Green Fabrication Method of Layered and Open-Cell Polylactide Foams for Oil-Sorption via Pre-Crystallization and Supercritical CO2-Induced Melting

Journal of Supercritical Fluids

DOI

2020

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation

DOI

2020

Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path

DOI

2020

Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves

DOI

2020

The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet

DOI

2020

Influence of isothermal and non-isothermal aging treatments on microstructure and properties of Al-Zn-Mg alloy helical profile

DOI

2020

Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy

Materials & Design (1980-2015)

DOI

2020

Effect of pulsed laser parameters on deformation inhomogeneity in laser shock incremental forming of pure copper foil

DOI

2020

Structural optimization and finite element analysis of poly-l-lactide acid coronary stent with improved radial strength and acute recoil rate.

Journal of Biomedical Materials Research. Part B - Applied biomaterials

DOI

2020

Effect of Heat Treatment Process on Microstructure of a New Metastable β Titanium Alloy

Materials Science Forum

DOI

2020

Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process

Journal of Materials Processing Technology

DOI

2020

Crystallization and Mechanical Properties of Glass Fiber Reinforced Polypropylene Composites Molded by Rapid Heat Cycle Molding

Fibers And Polymers

DOI

2020

Effects of solution treatment on the microstructure and mechanical properties of naturally aged EN AW 2024 Al alloy sheet

Journal of Alloys and Compounds

DOI

2020

The Effect of Stretching on UHWMPE Microporous Film by Thermally Induced Phase Separation Method

DOI

2020

Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles

DOI

2020

Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die

DOI

2020

Poly(l-lactic acid) Crystallization in Pressurized CO2: An In Situ Microscopic Study and a New Model for Secondary Nucleation in Supercritical CO2

DOI

2020

Mechanical joining behavior of Cu–Fe dissimilar metallic foils in laser shock clinching

The International Journal of Advanced Manufacturing Technology

DOI

2020

Laser shock induced incremental forming of pure copper foil and its deformation behavior

DOI

2020

Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting

DOI

2020

Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties

DOI

2020

Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions

Journal of Manufacturing Processes

DOI

2020

Bonding mechanism and mechanical properties of 2196 Al-Cu-Li alloy joined by hot compression deformation

DOI

2020

Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: A comparative study

DOI

2020

Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion

Journal of Materials Research and Technology

DOI

2020

Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging

DOI

2020

Review on the performances, foaming and injection molding simulation of natural fiber composites

DOI

2020

Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar

Materials & Design (1980-2015)

DOI

2020

Large cyclic deformability of microcellular TPU/MWCNT composite film with conductive stability, and electromagnetic interference shielding and self-cleaning performance

Composites Science and Technology

DOI

2019

Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate

Materials Science & Engineering: A

DOI

2019

One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile

Thin-walled structures

DOI

2019

Investigation on the growth of snowflake-shaped Poly(l-Lactic acid) crystal by in-situ high-pressure microscope

Polymer

DOI

2019

Investigation of the influence of pressurized CO2 on the crystal growth of poly(l-lactic acid) by using an in situ high-pressure optical system.

Soft Matter

DOI

2019

Green and tunable fabrication of graphene-like N-doped carbon on a 3D metal substrate as a binder-free anode for high-performance potassium-ion batteries

Journal of Materials Chemistry A

DOI

2019

Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process

Results in Physics

DOI

2019

Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling

Journal of Alloys and Compounds

DOI

2019

Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process

Journal of Materials Research

DOI

2019

Effects of dynamic mold temperature control on melt pressure, cellular structure, and mechanical properties of microcellular injection-molded parts: An experimental study

Cellular polymers

DOI

2019

Grain refinement and strength enhancing of hot extruded Mg alloy by application of electric pulse

Materials letters (General ed.)

DOI

2019

A green strategy to regulate cellular structure and crystallization of poly(lactic acid) foams based on pre-isothermal cold crystallization and CO2 foaming.

International Journal of Biological Macromolecules

DOI

2019

Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy

Journal of Materials Processing Technology

DOI

2019

Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding

European Polymer Journal

DOI

2019

Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy

Journal of Materials Science

DOI

2019

Strong and ductile poly (lactic acid) achieved by carbon dioxide treatment at room temperature

Journal of CO2 Utilization

DOI

2019

Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds

Materials Characterization

DOI

2019

Microstructures of longitudinal/transverse welds and back-end defects and their influences on the corrosion resistance and mechanical properties of aluminum alloy extrusion profiles

Journal of Materials Processing Technology

DOI

2019

Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming.

International Journal of Biological Macromolecules

DOI

2019

Optimization of roll forming process for high-strength V channel steels

The International Journal of Advanced Manufacturing Technology

DOI

2019

Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy

Results in Physics

DOI

2019

Evaluating the welding quality of longitudinal welds in a hollow profile manufactured by porthole die extrusion: Experiments and simulation

Journal of Manufacturing Processes

DOI

2019

Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy

DOI

2019

Investigation of the Rheological Behaviors of Polymeric Materials in the Film Casting Process through Multiscale Modeling and Simulation Method

Macromolecular Theory and Simulations

DOI

2019

Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195

Journal of Alloys and Compounds

DOI

2019

Novel Method of Fabricating Free-Standing and Nitrogen-Doped 3D Hierarchically Porous Carbon Monoliths as Anodes for High-Performance Sodium-Ion Batteries by Supercritical CO2 Foaming.

ACS Applied Materials and Interfaces

DOI

2019

Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2

Journal of Supercritical Fluids

DOI

2019

Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation

Journal of Alloys and Compounds

DOI

2019

Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment.

International Journal of Biological Macromolecules

DOI

2019

The integration of through-thickness normal stress and friction stress in the M-K model to improve the accuracy of predicted FLCs

International journal of plasticity

DOI

2019

Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195

Journal of Materials Research and Technology

DOI

2019

A comparative study on hot deformation and solid-state bonding behavior of aluminum alloys for the integration of solid-state joining and forming processes

The International Journal of Advanced Manufacturing Technology

DOI

2019

Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability

Polymer

DOI

2019

Microstructural evolution and its effect on mechanical properties of spray deposited 2195 alloy during porthole die extrusion process

Vacuum

DOI

2019

High-expansion polypropylene foam prepared in non-crystalline state and oil adsorption performance of open-cell foam.

Journal of Colloid and Interface Science

DOI

2019

Thermal‐Insulation, Electrical, and Mechanical Properties of Highly‐Expanded PMMA/MWCNT Nanocomposite Foams Fabricated by Supercritical CO 2 Foaming

Macromolecular materials and engineering (Print)

DOI

2019

Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate

Materials & Design (1980-2015)

DOI

2019

Structure-tunable thermoplastic polyurethane foams fabricated by supercritical carbon dioxide foaming and their compressive mechanical properties

Journal of Supercritical Fluids

DOI

2019

Fabrication of macroporous carbon monoliths with controllable structure via supercritical CO2 foaming of polyacrylonitrile

Journal of CO2 Utilization

DOI

2018

铝合金型材分流模挤压过程焊合行为的研究进展

《锻压技术》

DOI

2018

高速列车铝合金轴箱体锻造工艺设计及材料变形规律

《锻压技术》

2018

超声振动对渐进成形过程成形力的影响

《锻压技术》

2018

超临界流体辅助微孔发泡注塑技术及其熔体发泡行为

《机械工程学报》

2018

Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding

Chemical Engineering Journal

DOI

2018

Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets

DOI

2018

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Journal of Thermoplastic Composite Materials

DOI

2018

Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion

Journal of Alloys and Compounds

DOI

2018

Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications.

ACS Applied Materials and Interfaces

DOI

2018

Lightweight, super-elastic, and thermal-sound insulation bio-based PEBA foams fabricated by high-pressure foam injection molding with mold-opening

European Polymer Journal

DOI

2018

Meshless modeling of bending behavior of bi-directional functionally graded beam structures

Composites Part B: Engineering

DOI

2018

Lightweight and strong microcellular injection molded PP/talc nanocomposite

Composites Science And Technology

DOI

2018

Effect of extrusion speeds on the microstructure, texture and mechanical properties of high-speed extrudable Mg Zn Sn Mn Ca alloy

Vacuum

DOI

2018

Geometrically nonlinear bending analysis of functionally graded beam with variable thickness by a meshless method

DOI

2018

Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening

DOI

2018

Calculation method of spatial configuration of tube billet in roll forming process of a high strength steel drive shaft tube

DOI

2018

Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications

DOI

2018

Finite element simulation of three-dimensional viscoelastic flow at high Weissenberg number based on the log-conformation formulation

Mechanics of Time-Dependent Materials

DOI

2018

Research on temperature and pressure responses in the rapid mold heating and cooling method based on annular cooling channels and electric heating

DOI

2018

Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures

Journal of Alloys and Compounds

DOI

2018

Foaming Mechanism of Polypropylene in Gas-Assisted Microcellular Injection Molding

DOI

2018

Morphology Evolution and Elimination Mechanism of Bubble Marks on Surface of Microcellular Injection-Molded Parts with Dynamic Mold Temperature Control

DOI

2018

Correction: Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material.

Nanoscale

DOI

2018

Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing

Materials Science & Engineering: A

DOI

2018

Effect of preparation methods on electrical and electromagnetic interference shielding properties of PMMA/MWCNT nanocomposites

Polymer Composites

DOI

2018

Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity

DOI

2018

Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy

Journal of Materials Processing Technology

DOI

2018

Preform optimization and microstructure analysis on hot precision forging process of a half axle flange

DOI

2018

Effects of process parameters on thickness thinning and mechanical properties of the formed parts in incremental sheet forming

The International Journal of Advanced Manufacturing Technology

DOI

2018

A new core-back foam injection molding method with chemical blowing agents

DOI

2018

Application and analysis of spread die and flat container in the extrusion of a large-size, hollow, and flat-wide aluminum alloy profile

DOI

2018

Fabrication of high-expansion microcellular PLA foams based on pre-isothermal cold crystallization and supercritical CO2 foaming

Polymer degradation and stability

DOI

2018

Interfacial structure and bonding mechanism of weld seams during porthole die extrusion of aluminum alloy profiles

DOI

2018

Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process

Journal of Materials Processing Technology

DOI

2018

Suppressing shrinkage/warpage of PBT injection molded parts with fillers

DOI

2018

Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures

DOI

2018

Microstructure and Mechanical Properties of the As-Cast and As-Homogenized Mg-Zn-Sn-Mn-Ca Alloy Fabricated by Semicontinuous Casting

Materials

DOI

2017

LZ91 Mg-Li合金分流模挤压成形过程数值模拟与实验研究

DOI

2017

蓄能器外壳温冷复合挤压预成形设计

《精密成形工程》

2017

7×××系空心铝型材挤压横向焊缝的研究

《精密成形工程》

2017

三柱槽壳反挤压变形规律及提高反挤端面平齐度的凸模结构设计

《锻压技术》

2017

Experimental and numerical investigations on transverse weld of hollow aluminum profile during porthole extrusion process

DOI

2017

Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process

DOI

2017

Numerical and experimental investigations on polymer melt flow phenomenon in a vario‐thermal mold cavity

DOI

2017

Numerical investigation of three-dimensional fiber suspension flow by using finite volume method

Polymer Bulletin

DOI

2017

Study on the welding quality in the porthole die extrusion process of aluminum alloy profiles

DOI

2017

Investigation on longitudinal weld seams during porthole die extrusion process of high strength 7075 aluminum alloy

DOI

2017

A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance

DOI

2017

Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies

DOI

2017

Role of elastic strain energy in cell nucleation of polymer foaming and its application for fabricating sub-microcellular TPU microfilms

DOI

2017

Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique

DOI

2017

Influence of die geometric structure on flow balance in complex hollow plastic profile extrusion

DOI

2017

A review on the recent development of incremental sheet-forming process

DOI

2017

Transition from the hierarchical distribution to a homogeneous formation in injection molded isotactic polypropylene (iPP) with dynamic mold temperature control

DOI

2017

Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material.

Nanoscale

DOI

2017

Formation mechanism of porous structure in plastic parts injected by microcellular injection molding technology with variable mold temperature

DOI

2017

Ultra-tough and super thermal-insulation nanocellular PMMA/TPU

DOI

2017

Mechanical and Thermal Properties of ABS/PMMA/Potassium Titanate Whisker Composites

DOI

2017

Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam

DOI

2017

Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process

DOI

2017

Joining of 1060/6063 aluminum alloys based on porthole die extrusion process

DOI

2017

Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties

DOI

2017

Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds

DOI

2017

A method to improve dimensional accuracy and mechanical properties of injection molded polypropylene parts

DOI

2017

Investigation on bubble morphological evolution and plastic part surface quality of microcellular injection molding process based on a multiphase-solid coupled heat transfer model

DOI

2017

Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization

DOI

2017

Evolution of transverse weld during porthole extrusion of AA7N01 hollow profile

DOI

2017

Structural evolution of uniaxial tensile-deformed injection molded poly(ɛ-caprolactone)/hydroxyapatite composites

DOI

2016

Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles

DOI

2016

Formation mechanism and structural characteristics of unfoamed skin layer in microcellular injection-molded parts

DOI

2016

Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ε-caprolactone) blends.

Journal of The Mechanical Behavior of Biomedical Materials

DOI

2016

A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature

DOI

2016

Erratum to “State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process” [Mater. Des. 89 (2015) 737–48]

DOI

2016

Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition

Journal of materials engineering and performance (Print)

DOI

2016

Numerical and experimental investigation on thermo-mechanical behavior during transient extrusion process of high-strength 7 × × × aluminum alloy profile

The International Journal of Advanced Manufacturing Technology

DOI

2016

Material flow analysis and extrusion die modifications for an irregular and multitooth aluminum alloy radiator

DOI

2016

Corrigendum to “A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature” [Mater. Des., Volume 90, 15 January 2016, Pages 91–100]

DOI

2016

Optimization of porthole extrusion dies with the developed algorithm based on finite volume method

The International Journal of Advanced Manufacturing Technology

DOI

2016

Microcellular foaming injection molding technology capable of realizing high surface glossiness and high bubble density as well as mold

2016

Establishment of processing map and analysis of microstructure on multi-crystalline tungsten plastic deformation process at elevated temperature

DOI

2016

Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles

DOI

2016

Constitutive equation and processing maps of an Al–Mg–Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles

DOI

2016

高温での多結晶タングステンの塑性変形過程におよぼす微細構造のプロセシングマップと分析法の確立【Powered by NICT】

2016

Microcellular injection molded polylactic acid/poly (ε‐caprolactone) blends with supercritical CO2: Correlation between rheological properties and their foaming behavior

DOI

2016

Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing ribs

DOI

2015

一种三维表面网格自动生成方法

《计算力学学报》

2015

Bubble morphological evolution and surface defect formation mechanism in the microcellular foam injection molding process

DOI

2015

Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation

Journal of Mechanical Science and Technology

DOI

2015

Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process

DOI

2015

Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding

DOI

2015

Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections

DOI

2015

Effects of ram velocity on pyramid die extrusion of hollow aluminum profile

The International Journal of Advanced Manufacturing Technology

DOI

2015

Enhancing Nanofiller Dispersion Through Prefoaming and Its Effect on the Microstructure of Microcellular Injection Molded Polylactic Acid/Clay Nanocomposites

DOI

2015

Numerical Simulation and Experimental Study on Parameter Optimization of Cold Flanging Process of Pipe Tee

DOI

2015

Continuous modeling and simulation of flow-swell-crystallization behaviors of viscoelastic polymer melts in the hollow profile extrusion process

DOI

2015

Identification of friction coefficients and strain-compensated Arrhenius-type constitutive model by a two-stage inverse analysis technique

DOI

2015

Application of Ant Colony Algorithm in Optimal Preform Design of Forging Process

DOI

2015

Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States

Journal of materials engineering and performance (Print)

DOI

2015

Preform design in forging process of complex parts by using quasi-equipotential field and response surface methods

The International Journal of Advanced Manufacturing Technology

DOI

2015

Dedicated linear – Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys

DOI

2015

Investigation on phosphorus halogen‐free flame‐retardancy systems in short glass fiber‐reinforced PC/ABS composites under rapid thermal cycle molding process condition

DOI

2015

Investigation of the influence of the initial groove angle in the M–K model on limit strains and forming limit curves

DOI

2015

Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy

DOI

2015

The effect of high temperature annealing process on crystallization process of polypropylene, mechanical properties, and surface quality of plastic parts

DOI

2015

Effects of mold cavity temperature on surface quality and mechanical properties of nanoparticle‐filled polymer in rapid heat cycle molding

DOI

2015

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts

Journal of polymer research

DOI

2014

应力三轴度及轧辊凸度对93钨合金板材轧制损伤的影响

《材料工程》

2014

基于UG的复杂空心铝型材平面分流组合模CAD系统

《锻压技术》

2014

The Effects of Forming Parameters on Conical Ring Rolling Process

TheScientificWorldJournal

DOI

2014

Analysis and porthole die design for a multi-hole extrusion process of a hollow, thin-walled aluminum profile

The International Journal of Advanced Manufacturing Technology

DOI

2014

Finite element simulation of three-dimensional viscoelastic planar contraction flow with multi-mode FENE-P constitutive model

Polymer Bulletin

DOI

2014

Effects of Temperature and Strain Rate on the Forming Limit Curves of AA5086 Sheet

DOI

2014

Effect of mold temperature on motion behavior of short glass fibers in injection molding process

DOI

2014

Modeling and simulation of morphology variation during the solidification of polymer melts with amorphous and semi-crystalline phases

DOI

2014

The cell forming process of microcellular injection‐molded parts

DOI

2014

Numerical investigation of the crystallization and orientation behavior in polymer processing with a two-phase model

Computers and Chemical Engineering

DOI

2014

Die optimization design and experimental study of a large wallboard aluminum alloy profile used for high-speed train

The International Journal of Advanced Manufacturing Technology

DOI

2014