郁舒阳｜南通大学｜学者主页

2026

基于SPH的花岗岩高精度建模方法及矿物尺度裂纹扩展规律研究

周宇，钟露露，郁舒阳，梁秦源，吕文俊，韩观胜，唐琼琼，李博，伍法权

《岩石力学与工程学报》

2026

基于离散单元法的曲形裂隙-隧洞组合结构破裂规律研究

肖艾，孙屹，朱振宇，王思瑶，郁舒阳

《南通大学学报(自然科学版)》

2026

Experimental and Numerical Investigation on the Mechanical Behavior and Fracture Mechanisms of Bolted Stratified Rock Mass with Different Bedding Inclinations

Wenhui Sun, Yu Zhou, Faquan Wu, Shuyang Yu

Rock Mechanics and Rock Engineering

DOI

2026

Investigating the Interacting Mechanisms of Precast Intersecting Cracks in Concrete: Insights from the Simulations Based on Discrete Element Method

Yuexing Yu, Wenxin Li, Zhiwei Sun, Liang Liu, Zhiyong Zhang, Runlin Luo, Xianzheng Zhu, Shuyang Yu

Materials

DOI

2026

Experimental and numerical investigations on compression-shear fracture behavior and asperity shearing mechanisms of 3D printed rock like specimens with fissure–hole and sawtooth joints

Yuanhao Di, Shuyang Yu, Yifei Li, Xianzheng Zhu, Zhengyang Su, Jiajie Li

Transportation Geotechnics

DOI

2026

Fracture evolution of 3D-printed straight-wall arched tunnel models with localized overbreaks: Coupled effects of geometry and angular position

Wenbing Zhang, Yuzhi Ma, Lei Gan, Mingchao Li, Danda Shi, Yuhui He, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

CPU-accelerated parallel SPH method for modelling 3D rock hydraulic fracturing problems and its applications

Qingyu Zhang, ZhangLei Wu, Kaibo Yang, Yuchuan Wang, Yifei Li, Shuyang Yu

Scientific Reports

DOI

2026

Employing sand 3D printing technology and DEM to investigate the fracture mechanisms of array fissured tunnel specimens

Lei Zhang, Yifei Li, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Study on failure mechanism of circular tunnel with void in lining crown: Vision-based experiment and discrete element modeling

Jiajie Li, Yinuo Yin, Kai Liu, Shuyang Yu, Qiuyi Wang, Rongchen Gu, 姚业鑫

Theoretical and Applied Fracture Mechanics

DOI

2026

Numerical Simulation of Crack Propagation in Concrete with Prefabricated Array Fractures Based on the Discrete Element Method

Haiying Mao, Jun Zhen, Zuodong Zhou, Yaohui He, Xianzheng Zhu, Wenbing Zhang, Shuyang Yu

Materials

DOI

2026

Investigation on the propagation characteristics of tensile cracks crossing prefabricated flaws with rock-like samples based on the semi-circular bending test

J Huang, Xiaoli Liu, Shuyang Yu, Hesi Xu

Engineering Fracture Mechanics

DOI

2026

Failure mechanisms of straight-wall arched tunnel models with localized overbreak: Stress redistribution, fracture-mode transition and DIC-SPH evidence

Wenbing Zhang, Yuhui He, Shuyang Yu, Mingchao Li, Lei Gan, Danda Shi, Jiayi Fang

Engineering Failure Analysis

DOI

2026

Crack tip creep behaviors of UHPC under diverse loading modes: experimental characterization and nonlinear prediction model based on OM-DIC technique

Guo Yang, Jintao He, Shuyang Yu, Jie Yang, Qian Cao, Yifei Li, Wen Xu

Theoretical and Applied Fracture Mechanics

DOI

2026

Experimental and numerical study on mechanical responses of 3D-printed rock-like specimens with coupled serrated joints and central hole

Zhenyu Zhu, Shuyang Yu, Yu Zhou, Faquan Wu

Theoretical and Applied Fracture Mechanics

DOI

2026

Failure process and mechanism of tunnel-flaw structures under dynamic disturbance: insights from 3D-printed models and DEM-FDM simulations

Yu Zhou, Jiacheng Zhang, Bin Xu, Fang Zhang, Qinyuan Liang, Qiongqiong Tang, Fangyue Yan, Libo Zheng, Faquan Wu, Shuyang Yu

Engineering Failure Analysis

DOI

2026

Investigation on the Crack Propagation of Edge-Fissured Slope-Shaped Specimens: Coupling Effects of Bedding Planes and Edge Fissures

Hesi Xu, Jun Yu, Jun Yu, Yifei Li, Xianzheng Zhu, Zhengyang Su, Shuyang Yu

Transportation Geotechnics

DOI

2026

Research on the mechanical properties and fracture mechanisms of tunnel specimens containing V-shaped fissures

Hesi Xu, Yifei Li, Jun Yu, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Investigating the Thermal Cracking Processes of a Concrete Disk Considering the Influences of Aggregates and Pores: A Numerical Study Based on DEM

Song Hu, Xianzheng Zhu, Jian Shi, Yifei Li, Shuyang Yu

Materials

DOI

2026

Effects of pre-existing fissure properties on the failure mechanisms of gravity dam-shaped specimens: Insights from 3D printing experiments and DEM simulations

Hesi Xu, Yifei Li, Lei Ge, Jun Yu, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Advanced Experimental Technology, Theory and Numerical Methods in Geomaterials and Concrete Materials

Wenhui Sun, Yifei Li, Runyu Liu, Shuyang Yu

Materials

DOI

2026

Investigations on the fracture mechanisms of sand 3D printed rock-like specimens considering bedding and fissure inclinations

Xingyu Tao, Yifei Li, Lei Wu, Jun Yu, Xianzheng Zhu, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Integration of sand-based 3D Printing, DIC and PFC simulation: unraveling fracture behaviors of Twin-tunnel models with V-shaped fissure networks

Wenhui Sun, Yu Zhou, Faquan Wu, Xiaojian Cao, Shuyang Yu

Engineering Failure Analysis

DOI

2026

Investigating the coupled failure mechanisms of rock-like specimens containing multiple fissure configurations: a combined DIC and DEM study

Zhenyu Zhu, Wensheng Liang, Lidong Ni, Jian Shi, Xianzheng Zhu, Yifei Li, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Cracking Mechanisms of Mesoscale Concrete Models Containing Single and Double Fissures Based on DEM

Jinfang Zhang, Yi Sun, Gongye Sun, Yifei Li, Shuyang Yu

Materials

DOI

2026

Fracture mechanisms of rock-like specimens containing double resin-infilled fissures under three-point bending loading: Sand-based 3D printing experiments and discrete element numerical simulations

Wenhui Sun, Yifei Li, Xiaodong Ge, Xiaojian Cao, Xianzheng Zhu, Haizhou Zhou, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Coupling effects of bedding and rock bridge inclination on the failure behavior of 3D printed layered sandstone specimens

Xingyu Tao, Shuyang Yu, Jun Yu, Yifei Li, Shan Zhao, Jiajie Li

Theoretical and Applied Fracture Mechanics

DOI

2026

Failure morphologies in grouted and ungrouted double fissured specimens: experiments and SPH simulations

Ting Jiang, Jilin Wang, Mengyao Shen, Wenbing Zhang, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Using a meshless method to investigate the effects of confining pressure on the hydraulic fracturing processes of hydraulic tunnels

Haichen Zhang, Yanran Shi, Juan José Benito Mu, Ruifu Hao, Dunzhe Qi, Wei Li, Bufan Zhang, Shuyang Yu

Scientific Reports

DOI

2026

Exploring the coupling fracture mechanisms of joints and fissures based on sand 3D printing experiments and DEM simulations

Zhenyu Zhu, Yifei Li, Lidong Ni, Xianzheng Zhu, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2026

Investigating the Thermal Failure Mechanisms of Teeth: Insights from an Improved Thermal–Mechanical-Damage Coupling Meshless Numerical Method

Shuyang Yu, Xiangyu Wang, Li Ma, Yifei Li, Weidong Yin, Hao Zheng, Hui Chen

Arabian Journal for Science and Engineering

DOI

2026

Effects of adjacent cavity configuration on progressive failure of straight-wall arched tunnel models: SPH simulations and experiments

Peng Wang, Xiaohui Chen, Shihua Zhang, Junkun Tan, Shuyang Yu, Wenbing Zhang

Computational Particle Mechanics

DOI

2026

Investigating the cracking mechanisms of V-shaped fissured rock-like specimens under compression-shear loading: sand 3D printing experiments and DEM simulations

Wenhui Sun, Shuyang Yu, Yi-Fei Li, Xiaojian Cao

Theoretical and applied fracture mechanics (Print)

DOI

2026

Fracture behavior and evolution mechanism of granular-structured marble with prefabricated cracks under three-point bending

Qiang Zhang, Hesi Xu, J. Yu, Shuyang Yu, Tao Zhang, Bo-Han Zhang, Bei Zhang

Theoretical and applied fracture mechanics (Print)

DOI

2026

Influence of fissure inclination on the mechanical behavior and crack evolution of asymmetric twin tunnels: Insights from 3D printing, DIC, and PFC2D simulation

Wenhui Sun, Wensheng Liang, Yi-Fei Li, Xian-Zheng Zhu, Bojing Xu, Shuyang Yu

Theoretical and applied fracture mechanics (Print)

DOI

2026

Studies on the progressive fracturing mechanisms of tunnel specimens containing X-shaped ice-filled/unfilled fissures

Xiao-Hui Chen, Xiang-Yang Xu, Shuyang Yu, Guangyang Xu, Xi Wang, Wenkai Wang

Theoretical and applied fracture mechanics (Print)

DOI

2026

Effects of fissure geometry on mechanical response and failure patterns of 3D-printed teeth under compression via DIC and DEM

Zhenyu Zhu, Yi-Fei Li, Jiu-Hao Dai, Shuyang Yu, Yanbing Su

Materials & Design

DOI

2026

Crack propagation mechanisms in rock-like samples with a serrated joint and double fissures under compression-shear loading

Yuanhao Di, Yi-Fei Li, Qiang Liu, Xian-Zheng Zhu, Zheng-Yang Su, Shuyang Yu

Theoretical and applied fracture mechanics (Print)

DOI

2026

Porosity and Fissure Inclination Co-regulated Trabecular Bone Failure: A DEM-Based Meso-scale Analysis of Crack Initiation, Propagation, and Mechanism

Runyu Liu, Yi-Fei Li, Xian-Zheng Zhu, Shuyang Yu

The Arabian journal for science and engineering

DOI

2026

Mechanical characteristics and fracture properties of 3D-printed twin-tunnel models containing pre-existing cracks with various inclination angles

Wenhui Sun, Yi-Fei Li, Wang-Ping Qian, Xian-Zheng Zhu, Zheng-Yang Su, Jiang Xu, Shuyang Yu

Theoretical and applied fracture mechanics (Print)

DOI

2026

From experiment to simulation: probing the crack propagation mechanisms of S-shaped fissures in rock-like specimens via sand 3D printing and DEM modelling

Zhenyu Zhu, Shuyang Yu, Yi-Fei Li, Runyu Liu

Theoretical and applied fracture mechanics (Print)

DOI

2026

Failure mechanisms of intermittent fissure specimens under compression-shear loading: Sand 3D printing experiments and DEM simulation

Zhenyu Zhu, Yi-Fei Li, Lei Zhang, Shuyang Yu

Theoretical and applied fracture mechanics (Print)

DOI

2026

Investigating the mechanical properties and crack propagation Laws of rock-like samples: Coupling effects of layer angles and fissures angles

Yuanhao Di, Wensheng Liang, Yi-Fei Li, Peng-Xu Qian, Jian Shi, Shuyang Yu

Theoretical and applied fracture mechanics (Print)

DOI

2025

力学性质可控的透明类岩试样制备方法：孔隙率调控途径及其影响

周宇，马喜洋，郁舒阳，韩观胜，唐琼琼，李博，伍法权

《岩石力学与工程学报》

2025

Study on the Influence of Tunnel Inclination Angle and Offset Distance on Its Mechanical Properties and Fracture Mechanisms

Hesi Xu, Shuyang Yu, Jun Yu, Y. Li

Rock Mechanics and Rock Engineering

DOI

2025

Fracture behaviors of bedded rock-like specimens with pre-existing flaws under three-point bending: An integrated experimental and numerical study

Wenhui Sun, Zhenggang Duan, Yifei Li, Xiaojian Cao, Shuyang Yu

Theoretical and Applied Fracture Mechanics

DOI

2025

Investigating the Cracking Processes and Bearing Performance of Fissured Concrete SCB Specimens via DEM-Based Mesoscopic Modeling Considering Fissure Angle, Aggregate Content and Porosity

Qinrong Li, Suyi Liu, Yifei Li, Min Qiu, Ruitong Zhang, Cheng Chen, Shuyang Yu

Materials

DOI

2025

Research on the hydraulic fracturing processes of side-fissured concrete: meshless crack morphology simulations and cracking mechanisms discussion

Ting Xin Jiang, Jilin Wang, Ding Nie, Wenbing Zhang, Shuyang Yu

Computers & Structures

DOI

2025

Investigating the crack propagation processes of grouted / ungrouted fissured tunnel specimens using 3D printing technology and SPH simulation method

Shuyang Yu, Yifei Li, Yuan Gao, Gongye Sun, Henrui Liu

Construction and Building Materials

DOI

2025

Numerical Simulation of Tunnel Boring Machine (TBM) Disc Cutter Rock Breaking Based on Discrete Element Method

Liang Liu, Zhili Yang, Wenxin Li, Panfei Liu, Fanbao Meng, Haibo Ma, Yuexing Yu, Ruitong Zhang, Min Qiu, Xingyu Tao, Shuyang Yu

Processes

DOI

2025

Experimental Investigation on the Frost Resistance and Service Life Prediction of Basalt Fiber-Reinforced Concrete

Chuan Zhao, Guoxin Jiang, Junli Guo, Xin Zhang, Zelong Ma, Chunyi Zhuang, Wenbing Zhang, Shuyang Yu

Fibers

DOI

2025

Investigating the Frost Cracking Mechanisms of Water-Saturated Fissured Rock Slopes Based on a Meshless Model

Chunhui Guo, Feixiang Zeng, Han Shao, Wenbing Zhang, Bufan Zhang, Wei Li, Shuyang Yu

Water

DOI

2025

Failure Mechanisms of Basalt Fiber Concrete Under Splitting Tensile Tests and DEM Simulations

Linlin Jiang, Chuan Zhao, Shaoxiong Zhang, Min Qiu, Ruitong Zhang, Yifei Li, Wenbing Zhang, Shuyang Yu

Buildings

DOI

2025

Study on Mesoscopic Evolution Mechanism and Influencing Factors of Concrete Blasting Damage Based on PFC

Xueying Hu, Shuyang Yu, Yifei Li, Yihan Tang, Ying Sun, Pingping Gu

Buildings

DOI

2025

Investigating the Double-Fissure Interactions of Hydraulic Concrete Under Three-Point Bending: A Simulation Study Using an Improved Meshless Method

Hua Zhang, Yanran Shi, Dong Niu, Yongqiang Xin, Dunzhe Qi, Bufan Zhang, Wei Li, Shuyang Yu

Buildings

DOI

2025

Mechanical performance and crack propagation characteristics of the recycled concrete using fractal gradation

Hui Jiang, Hao Sui, Fufu Zou, Shuyang Yu, Wangping Qian, Liu Bo, Yanming Liu, Yuan Fei Gao

Construction and Building Materials

DOI

2025

Research on the Influencing mechanisms of ice-filled fissures on the failure processes of tunnel specimens

Xueying Hu, Shuyang Yu, Yifei Li, Runyu Liu, Jun Yu

Theoretical and Applied Fracture Mechanics

DOI

2025

Investigations on visible frost cracking mechanisms of transparent rock-like specimens: 3D printing based experiments and thermo-hydro-mechanical-damage coupling meshless numerical modelling

Shuyang Yu, Yu Zhou, Xueying Hu, Xing Ma, Yifei Li

Engineering Fracture Mechanics

DOI

2025

Investigating the frost cracking of offshore wind power concrete piles using an improved meshless numerical method

Cong Hu, Taicheng Li, Haiying Mao, Jianfeng Xue, Haotian Chang, Zhaoqing Fu, Wenbing Zhang, Shuyang Yu

Computational Particle Mechanics

DOI

2025

Meshless numerical simulation on Frost cracking of rock masses containing random fissures under water-ice phase change

Wenwei Zhu, Xingyi Yang, Bin Liu, Xuejiao Han, Shuyang Yu

Scientific Reports

DOI

2025

A meshless SPH method for simulating hydraulic fracturing processes in meso-structured concrete

Shuyang Yu, Yifei Li, Chong Liu, Zilin Liang

Journal of Building Engineering

DOI

2025

Simulation of the Mesoscale Cracking Processes in Concrete Under Tensile Stress by Discrete Element Method

Zhenyu Zhu, Bintang Mas Mediamartha, Shuyang Yu, Yifei Li, Jian Zhi Xu, Pingping Gu

Materials

DOI

2025

Using sand 3D printing, digital image processing technology and DEM to investigate rock hole-fissure interaction mechanisms

Zhenyu Zhu, Mengyao Jiang, Shuyang Yu, Yifei Li

Theoretical and Applied Fracture Mechanics

DOI

2025

Three-Dimensional Printing Experiments and Particle-Based Meshless Numerical Investigations on the Failure Modes of Tunnel-Lining Structures Containing Fissures

Shuyang Yu, Zhongqing Chen, Yifei Li, Wei Li, Bufan Zhang

Buildings

DOI

2025

Numerical Simulation of Freezing-Induced Crack Propagation in Fractured Rock Masses Under Water–Ice Phase Change Using Discrete Element Method

Hesi Xu, Brian Putsikai, Shuyang Yu, Jun Yu, Yifei Li, Pingping Gu

Buildings

DOI

2025

Investigating the tensile cracking mechanisms of rock masses containing random fissures from the perspective of meshless numerical method

Jinyu Chen, Yi Sun, Wei Li, Bufan Zhang, Shuyang Yu

Frontiers in Earth Science

DOI

2025

Cracking mechanisms of fissure-hole specimens under compression-shear conditions: insights from sand 3D printing technology and DEM simulations

Zhenyu Zhu, Mengyao Jiang, Shuyang Yu, Yifei Li

Theoretical and Applied Fracture Mechanics

DOI

2025

Study on the interaction mechanisms between the fissure arrays and circular tunnels by physical experiment and meshless numerical method

Xueying Hu, Shibing Huang, Shuyang Yu, Yifei Li, Xiangyu Wang

Theoretical and Applied Fracture Mechanics

DOI

2025

Exploring the elliptic fissure cracking mechanisms from the perspective of sand 3D printing technology and Meshfree numerical strategy

Shuyang Yu, Xueying Hu, Zilin Liang

International Journal of Solids and Structures

DOI

2025

Investigations on the failure processes of tunnel models containing weak layers based on A novel tunnel-layer 3D printing technology and DEM

Qiang Zhang, Shuyang Yu, J. Yu, Yi-Fei Li, Zhenyu Zhu, Hesi Xu

Theoretical and applied fracture mechanics (Print)

DOI

2025

Effects of cavity locations and numbers on the failure mechanisms of 3D printing horseshoe-shaped tunnel specimens: Experiments and numerical simulations

Hesi Xu, J. Yu, Shuyang Yu, Runyu Liu, Yi-Fei Li

Theoretical and applied fracture mechanics (Print)

DOI

2025

Investigating the interaction mechanisms between fissures and layers of SCB specimens using a novel layer 3D printing technology and DEM

Qiang Zhang, Shuyang Yu, J. Yu, Yi-Fei Li, Hesi Xu, Qingfu Huang

Theoretical and applied fracture mechanics (Print)

DOI

2025

Effects of fissure inclination and spacing on crack evolution and mechanical behavior of 3D-printed horseshoe tunnel models: Experiments and SPH simulations

Wen-Bing Zhang, Yu-Hui He, Shuyang Yu, Ming-Chao Li, Dan-Da Shi, Hongwei Zhang

Theoretical and applied fracture mechanics (Print)

DOI

2025

Insights into fracture modes of 3D sand-printed rock-like models with T-shaped crossed fissures

Siyao Wang, Shuyang Yu, Xueying Hu, Yihao Chen, Yu-Chen Shi, Zilin Liang, Xiao-Yong Yang

Natural Hazards

DOI

2024

基于SPH方法的土体干缩开裂数值模拟研究

吴进财，孙屹，毕朝达，郁舒阳

《水电能源科学》

2024

Effects of fissure properties on the tunnel damage evolutions:Insights from DIC-based 3D printing experiments and meshless numerical simulations

Shuyang Yu, Jing Wang, Yuan Gao, Wenhui Sun, Jieyu Lu, Runyu Liu, Yue Shi

Tunnelling and Underground Space Technology

DOI

2024

How Will Concrete Piles for Offshore Wind Power Be Damaged Under Seawater Erosion? Insights from a Chemical-Damage Coupling Meshless Method

Caihong Wu, Bo Chen, Hao Wang, Jialin Dai, Shenghua Fan, Shuyang Yu

Materials

DOI

2024

Insights into the frost cracking mechanisms of concrete by using the coupled thermo-hydro-mechanical-damage meshless method

Shuyang Yu, Shibing Huang, Yifei Li, Zilin Liang

Theoretical and Applied Fracture Mechanics

DOI

2024

Investigations on the fracture mechanisms of Z-shaped fissured rock-like specimens

Xueying Hu, Shibing Huang, Shuyang Yu, Yifei Li, Jinguo Dong

Theoretical and Applied Fracture Mechanics

DOI

2024

Experimental investigation on the temperature-dependent shear strength of frozen coarse-grained soil-rock interfaces by considering three-dimensional roughness

Yonglong Yang, Shibing Huang, Shuyang Yu, Haowei Cai, Jiawei Zhai

Transportation Geotechnics

DOI

2024

Investigating the Mechanical Characteristics and Fracture Morphologies of Basalt Fiber Concrete: Insights from Uniaxial Compression Tests and Meshless Numerical Simulations

Chuan Zhao, Guoxin Jiang, Junli Guo, Shuyang Yu, Zelong Ma, Chunyi Zhuang, Youbin Lei, Zilin Liang

Materials

DOI

2024

Numerical Analysis on the Excavation Damage Evolutions of Layered Tunnels: Investigations on the Influences of Confining Pressure and Layer Angles

Wangping Qian, Tang Xu, Shuyang Yu, Xing Li, Yuexin Chen

Materials

DOI

2024

Particle flow simulation of crack propagation and penetration in Brazilian disc under uniaxial compression

Zhenyu Zhu, Hesi Xu, Shuyang Yu, Jun Yu, Bei Zhang

Rock mechanics letters.

DOI

2024

Effects of folded fissure properties on tunnel model failure: Experiments and numerical simulations

Siyao Wang, Shuyang Yu, Xueying Hu, Bokai Yang

Engineering Fracture Mechanics

DOI

2024

Modelling the blast cracking processes of rock masses using a total lagrange meshless method

Siyao Wang, Shuyang Yu, Zongkuan Ren

Case Studies in Construction Materials

DOI

2024

Influences of Pre-Existing Fissure Angles and Bridge Angles on Concrete Tensile Failure Characteristics: Insights from Meshless Numerical Simulations

Cong Hu, Taicheng Li, Zhaoqing Fu, Haiying Mao, Siyao Wang, Zilin Liang, Shuyang Yu

Materials

DOI

2024

A total Lagrange meshless method for modeling the concrete damage evolutions under blast loading

Shuyang Yu, Yuan Gao

Computational Particle Mechanics

DOI

2024

Effects of fissure locations on the crack propagation morphologies of 3D printing tunnel models: Experiments and numerical simulations

Xueying Hu, Shuyang Yu, Peng Ying, Jinguo Dong

Theoretical and Applied Fracture Mechanics

DOI

2024

Experimental and meshless numerical simulation on the crack propagation processes of marble SCB specimens

Xueying Hu, Shuyang Yu, Yuan Gao, Jun Yu, Jinguo Dong

Engineering Fracture Mechanics

DOI

2024

Experimental and Meshless Numerical Simulations on the Crack Propagation of Semi-Circular Bending Specimens Containing X-Shaped Fissures Under Three-Point Bending

Haiying Mao, Cong Hu, Jianfeng Xue, Taicheng Li, Haotian Chang, Zhaoqing Fu, Wenhui Sun, Jieyu Lu, Jing Wang, Shuyang Yu

Materials

DOI

2024

Modeling the Hydraulic Fracturing Processes in Shale Formations Using a Meshless Method

Ziru Xiang, Shuyang Yu, Xiangyu Wang

Water

DOI

2024

Metal intrusion enhanced deep learning-based high temperature deterioration analysis of rock materials

Yuan Fei Gao, Zixuan Yu, Shuyang Yu, Hao Sui, Feng Tian, Yanming Liu

Engineering Geology

DOI

2024

Modeling the rock frost cracking processes using an improved ice – Stress – Damage coupling method

Shuyang Yu, Xuhua Ren, Jixun Zhang

Theoretical and Applied Fracture Mechanics

DOI

2024

Effects of fissure length and angle on the fracture modes of 3D printed teeth model: Insights from DIC-based fracture tests and meshless numerical simulations

Shuyang Yu, Li Ma, Yuan Fei Gao, Hao Zheng, Xueying Hu, Runyu Liu, Yue Shi, Weidong Yin

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2023

Effects of graphene oxide on shearing performance of C–S–H composites: a molecular dynamics study

Weiqiang Chen, Shuaijie Lu, Shuyang Yu, Gong Chen, Ziheng Wang, Yuan Gao

Journal of Materials Science

DOI

2023

Microscopic mechanical analysis of K0 of granular soils with particle size distribution and rolling resistance effects

Tao Zhang, Sui Wang, Sui Wang, Shuyang Yu, Zhaohua Sun, Chuanfeng Fang, Shuren Wang, Shuren Wang

Computational Particle Mechanics

DOI

2023

Numerical Simulation Analysis of Fracture Propagation in Rock Based on Smooth Particle Hydrodynamics

Xuhua Ren, Hui Zhang, Jixun Zhang, Shuyang Yu, Semaierjiang Maimaitiyusupu

Materials

DOI

2023

Using an improved SPH algorithm to simulate thermo-hydro-mechanical-damage coupling problems in rock masses

Shuyang Yu, Xuhua Ren, Jixun Zhang

Case Studies in Thermal Engineering

DOI

2023

Hydraulic fracturing modelling of glutenite formations using an improved form of SPH method

Shuyang Yu, Yu Chun Zhou, Jie Yang, Weiqiang Chen

Geoenergy Science and Engineering

DOI

2023

Shear Damage Simulations of Rock Masses Containing Fissure-Holes Using an Improved SPH Method

Shuyang Yu, Xuekai Yang, Xuhua Ren, Jixun Zhang, Yuan Gao, Tao Zhang

Materials

DOI

2023

Simulating the chemical-mechanical-damage coupling problems of cement-based materials using an improved smoothed particle hydrodynamics method

Shuyang Yu, Xuhua Ren, Jixun Zhang, Zhaohua Sun

Case Studies in Construction Materials

DOI

2023

Numerical simulation on the excavation damage of Jinping deep tunnels based on the SPH method

Shuyang Yu, Xuhua Ren, Jixun Zhang, Zhaohua Sun

Geomechanics and Geophysics for Geo-Energy and Geo-Resources

DOI

2022

An Improved Form of SPH Method for Simulating the Thermo-Mechanical-Damage Coupling Problems and Its Applications

Shuyang Yu, Xuhua Ren, Jixun Zhang, Zhaohua Sun

Rock Mechanics and Rock Engineering

DOI

2022

A meshless method for modeling the microscopic drying shrinkage cracking processes of concrete and its applications

Shuyang Yu, Zhaohua Sun, Wangping Qian, Jun Yu, Jie Yang

Engineering Fracture Mechanics

DOI

2022

Numerical investigation and experimental study on fracture processes of central flawed sandstone Brazilian discs

Shuyang Yu, Jun Yu, Zhaohua Sun, Chenhui Zhu, Jie Yang

International Journal of Solids and Structures

DOI

2022

An improved meshless method for modeling the mesoscale cracking processes of concrete containing random aggregates and initial defects

Shuyang Yu, Zhaohua Sun, Jun Yu, Jie Yang, Chenhui Zhu

Construction and Building Materials

DOI

2022

An improved Smoothed Particle Hydrodynamics (SPH) method for modelling the cracking processes of teeth and its applications

Shuyang Yu, Zhaohua Sun, Xuhua Ren, Jixun Zhang, Jun Yu, Wenbing Zhang

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2021

基于孔压-应力耦合下考虑渗透系数各向异性对库水位骤降边坡的影响

戚海棠，郁舒阳，任旭华，张继勋

《石河子大学学报(自然科学版)》

DOI

2021

An improved form of smoothed particle hydrodynamics method for crack propagation simulation applied in rock mechanics

Shuyang Yu, Xuhua Ren, Jixun Zhang, Haijun Wang, Zhaohua Sun

International Journal of Mining Science and Technology

2021

An Improved Smoothed Particle Hydrodynamics Method and Its Application in Rock Hydraulic Fracture Modelling

Shuyang Yu, Xuhua Ren, Jixun Zhang, Haijun Wang, Zhaohua Sun

Rock Mechanics and Rock Engineering

DOI

2021

An Improved Form of 2D SPH Method for Modeling the Excavation Damage of Tunnels Containing Random Fissures

Xuhua Ren, Shuyang Yu, Jixun Zhang, Haijun Wang, Zhaohua Sun

Geofluids

DOI

2021

Numerical simulation on the stability of rock slope based on an improved SPH Method

Shuyang Yu, Xuhua Ren, Jixun Zhang, Haijun Wang, Zhaohua Sun, Yu Chun Zhou

Journal of Mountain Science

DOI

2021

Numerical Analysis of the Hydraulic Fracturing of Pressure Tunnel Lining Based on the 2P-IKSPH Method

Shuyang Yu, Xuhua Ren, Haijun Wang, Jixun Zhang, Zhaohua Sun

Mathematical Problems in Engineering

DOI

2021

An Improved Form of SPH Method and Its Numerical Simulation Study on the Rock Crack Propagation Containing Fissures and Holes

Xuhua Ren, Shuyang Yu, Haijun Wang, Jixun Zhang, Zhaohua Sun

Arabian Journal for Science and Engineering

DOI

2020

基于3D-ILC含60°平行双内裂纹脆性巴西圆盘断裂特性

王海军，张珂，任然，汤雷，郁舒阳

《工程科学与技术》

DOI

2020

不同降雨类型对边坡稳定性影响的研究

蔡欣育，任旭华，张继勋，郁舒阳

《三峡大学学报(自然科学版)》

DOI

2019

圆盘内裂纹扩展断裂试验及数值模拟研究

张珂，任旭华，张继勋，王海军，郁舒阳，贾悦

《水电能源科学》

2019

基于3D-ILC单轴拉伸双平行内裂纹扩展规律研究

郁舒阳，王海军，任然，汤雷，钟凌伟，张志韬，汤子璇

《岩土工程学报》

2019

基于3D-ILC含不同角度内裂纹圆盘断裂特性研究

王海军，张九丹，任然，汤雷，郁舒阳，钟凌伟，张珂

《岩土工程学报》

2019

基于3D-ILC三点弯脆性固体内裂纹扩展规律及破坏特征研究

王海军，李汉章，任然，汤雷，郁舒阳，张志韬

《岩石力学与工程学报》

DOI

2019

凤亭河水库黏土心墙坝库水位变动渗流特性分析

李林，冯明珲，朱化鹏，何令祖，郁舒阳，马明瑞

《华北水利水电大学学报(自然科学版)》

DOI

2019

基于3D-ILC球体45°三维双内裂纹复合断裂研究

张珂，王海军，任然，汤雷，郁舒阳，刘鑫娜，顾浩

《岩土力学》

DOI

2019

库水位变动对心墙坝渗流特性影响及防渗措施研究

马明瑞，张继勋，郁舒阳，钟萍

《三峡大学学报(自然科学版)》

DOI

2018

深厚覆盖层住宅工程渗控有限元分析

郁舒阳，张胜伟，杨兆兵，张继勋

《三峡大学学报(自然科学版)》

2018

降雨类型对浅层深层滑坡渗流及稳定性的影响

郁舒阳，张继勋，任旭华，杨兆兵

《水电能源科学》

2018

考虑土工膜缺陷的面膜坝渗透稳定性分析

张继勋，郁舒阳，胡南雄，杨兆兵

《长江科学院院报》

2017

基于Fredlund&Xing参数下不同雨型边坡渗透稳定性分析

郁舒阳，张继勋，王军磊，王天兴，朱文炜，胡南雄

《三峡大学学报(自然科学版)》

精选作品

期刊论文

基于SPH的花岗岩高精度建模方法及矿物尺度裂纹扩展规律研究

基于离散单元法的曲形裂隙-隧洞组合结构破裂规律研究

Experimental and Numerical Investigation on the Mechanical Behavior and Fracture Mechanisms of Bolted Stratified Rock Mass with Different Bedding Inclinations

Investigating the Interacting Mechanisms of Precast Intersecting Cracks in Concrete: Insights from the Simulations Based on Discrete Element Method

Experimental and numerical investigations on compression-shear fracture behavior and asperity shearing mechanisms of 3D printed rock like specimens with fissure–hole and sawtooth joints

Fracture evolution of 3D-printed straight-wall arched tunnel models with localized overbreaks: Coupled effects of geometry and angular position

CPU-accelerated parallel SPH method for modelling 3D rock hydraulic fracturing problems and its applications

Employing sand 3D printing technology and DEM to investigate the fracture mechanisms of array fissured tunnel specimens

Study on failure mechanism of circular tunnel with void in lining crown: Vision-based experiment and discrete element modeling

Numerical Simulation of Crack Propagation in Concrete with Prefabricated Array Fractures Based on the Discrete Element Method

Investigation on the propagation characteristics of tensile cracks crossing prefabricated flaws with rock-like samples based on the semi-circular bending test

Failure mechanisms of straight-wall arched tunnel models with localized overbreak: Stress redistribution, fracture-mode transition and DIC-SPH evidence

Crack tip creep behaviors of UHPC under diverse loading modes: experimental characterization and nonlinear prediction model based on OM-DIC technique

Experimental and numerical study on mechanical responses of 3D-printed rock-like specimens with coupled serrated joints and central hole

Failure process and mechanism of tunnel-flaw structures under dynamic disturbance: insights from 3D-printed models and DEM-FDM simulations

Investigation on the Crack Propagation of Edge-Fissured Slope-Shaped Specimens: Coupling Effects of Bedding Planes and Edge Fissures

Research on the mechanical properties and fracture mechanisms of tunnel specimens containing V-shaped fissures

Investigating the Thermal Cracking Processes of a Concrete Disk Considering the Influences of Aggregates and Pores: A Numerical Study Based on DEM

Effects of pre-existing fissure properties on the failure mechanisms of gravity dam-shaped specimens: Insights from 3D printing experiments and DEM simulations

Advanced Experimental Technology, Theory and Numerical Methods in Geomaterials and Concrete Materials

Investigations on the fracture mechanisms of sand 3D printed rock-like specimens considering bedding and fissure inclinations

Integration of sand-based 3D Printing, DIC and PFC simulation: unraveling fracture behaviors of Twin-tunnel models with V-shaped fissure networks

Investigating the coupled failure mechanisms of rock-like specimens containing multiple fissure configurations: a combined DIC and DEM study

Cracking Mechanisms of Mesoscale Concrete Models Containing Single and Double Fissures Based on DEM

Fracture mechanisms of rock-like specimens containing double resin-infilled fissures under three-point bending loading: Sand-based 3D printing experiments and discrete element numerical simulations

Coupling effects of bedding and rock bridge inclination on the failure behavior of 3D printed layered sandstone specimens

Failure morphologies in grouted and ungrouted double fissured specimens: experiments and SPH simulations

Using a meshless method to investigate the effects of confining pressure on the hydraulic fracturing processes of hydraulic tunnels

Exploring the coupling fracture mechanisms of joints and fissures based on sand 3D printing experiments and DEM simulations

Investigating the Thermal Failure Mechanisms of Teeth: Insights from an Improved Thermal–Mechanical-Damage Coupling Meshless Numerical Method

Effects of adjacent cavity configuration on progressive failure of straight-wall arched tunnel models: SPH simulations and experiments

Investigating the cracking mechanisms of V-shaped fissured rock-like specimens under compression-shear loading: sand 3D printing experiments and DEM simulations

Fracture behavior and evolution mechanism of granular-structured marble with prefabricated cracks under three-point bending

Influence of fissure inclination on the mechanical behavior and crack evolution of asymmetric twin tunnels: Insights from 3D printing, DIC, and PFC2D simulation

Studies on the progressive fracturing mechanisms of tunnel specimens containing X-shaped ice-filled/unfilled fissures

Effects of fissure geometry on mechanical response and failure patterns of 3D-printed teeth under compression via DIC and DEM

Crack propagation mechanisms in rock-like samples with a serrated joint and double fissures under compression-shear loading

Porosity and Fissure Inclination Co-regulated Trabecular Bone Failure: A DEM-Based Meso-scale Analysis of Crack Initiation, Propagation, and Mechanism

Mechanical characteristics and fracture properties of 3D-printed twin-tunnel models containing pre-existing cracks with various inclination angles

From experiment to simulation: probing the crack propagation mechanisms of S-shaped fissures in rock-like specimens via sand 3D printing and DEM modelling

Failure mechanisms of intermittent fissure specimens under compression-shear loading: Sand 3D printing experiments and DEM simulation

Investigating the mechanical properties and crack propagation Laws of rock-like samples: Coupling effects of layer angles and fissures angles

力学性质可控的透明类岩试样制备方法：孔隙率调控途径及其影响

Study on the Influence of Tunnel Inclination Angle and Offset Distance on Its Mechanical Properties and Fracture Mechanisms

Fracture behaviors of bedded rock-like specimens with pre-existing flaws under three-point bending: An integrated experimental and numerical study

Investigating the Cracking Processes and Bearing Performance of Fissured Concrete SCB Specimens via DEM-Based Mesoscopic Modeling Considering Fissure Angle, Aggregate Content and Porosity

Research on the hydraulic fracturing processes of side-fissured concrete: meshless crack morphology simulations and cracking mechanisms discussion

Investigating the crack propagation processes of grouted / ungrouted fissured tunnel specimens using 3D printing technology and SPH simulation method

Numerical Simulation of Tunnel Boring Machine (TBM) Disc Cutter Rock Breaking Based on Discrete Element Method

Experimental Investigation on the Frost Resistance and Service Life Prediction of Basalt Fiber-Reinforced Concrete

Investigating the Frost Cracking Mechanisms of Water-Saturated Fissured Rock Slopes Based on a Meshless Model

Failure Mechanisms of Basalt Fiber Concrete Under Splitting Tensile Tests and DEM Simulations

Study on Mesoscopic Evolution Mechanism and Influencing Factors of Concrete Blasting Damage Based on PFC

Investigating the Double-Fissure Interactions of Hydraulic Concrete Under Three-Point Bending: A Simulation Study Using an Improved Meshless Method

Mechanical performance and crack propagation characteristics of the recycled concrete using fractal gradation

Research on the Influencing mechanisms of ice-filled fissures on the failure processes of tunnel specimens

Investigations on visible frost cracking mechanisms of transparent rock-like specimens: 3D printing based experiments and thermo-hydro-mechanical-damage coupling meshless numerical modelling

Investigating the frost cracking of offshore wind power concrete piles using an improved meshless numerical method

Meshless numerical simulation on Frost cracking of rock masses containing random fissures under water-ice phase change

A meshless SPH method for simulating hydraulic fracturing processes in meso-structured concrete

Simulation of the Mesoscale Cracking Processes in Concrete Under Tensile Stress by Discrete Element Method

Using sand 3D printing, digital image processing technology and DEM to investigate rock hole-fissure interaction mechanisms

Three-Dimensional Printing Experiments and Particle-Based Meshless Numerical Investigations on the Failure Modes of Tunnel-Lining Structures Containing Fissures

Numerical Simulation of Freezing-Induced Crack Propagation in Fractured Rock Masses Under Water–Ice Phase Change Using Discrete Element Method

Investigating the tensile cracking mechanisms of rock masses containing random fissures from the perspective of meshless numerical method

Cracking mechanisms of fissure-hole specimens under compression-shear conditions: insights from sand 3D printing technology and DEM simulations

Study on the interaction mechanisms between the fissure arrays and circular tunnels by physical experiment and meshless numerical method

Exploring the elliptic fissure cracking mechanisms from the perspective of sand 3D printing technology and Meshfree numerical strategy

Investigations on the failure processes of tunnel models containing weak layers based on A novel tunnel-layer 3D printing technology and DEM

Effects of cavity locations and numbers on the failure mechanisms of 3D printing horseshoe-shaped tunnel specimens: Experiments and numerical simulations

Investigating the interaction mechanisms between fissures and layers of SCB specimens using a novel layer 3D printing technology and DEM

Effects of fissure inclination and spacing on crack evolution and mechanical behavior of 3D-printed horseshoe tunnel models: Experiments and SPH simulations

Insights into fracture modes of 3D sand-printed rock-like models with T-shaped crossed fissures

基于SPH方法的土体干缩开裂数值模拟研究

Effects of fissure properties on the tunnel damage evolutions:Insights from DIC-based 3D printing experiments and meshless numerical simulations

How Will Concrete Piles for Offshore Wind Power Be Damaged Under Seawater Erosion? Insights from a Chemical-Damage Coupling Meshless Method

Insights into the frost cracking mechanisms of concrete by using the coupled thermo-hydro-mechanical-damage meshless method

Investigations on the fracture mechanisms of Z-shaped fissured rock-like specimens