孙丰瑞

期刊论文

1. Fengrui Sun, Kebin Yang, Xinbo Qin, Weibing Wu, Yizhong Lu (2025). Achieving highly efficient electrocatalytic hydrogen evolution with Co-doped MoS2 nanosheets. Nanoscale Horizons.DOI
2. Cheng-Xiang Li, Fengrui Sun, Xinbo Qin, Kebin Yang, Weibing Wu (2024). A general strategy for Ni0–NiOOH hybrid catalyst of high hydrogen evolution activity. International journal of hydrogen energy.DOI
3. Xinbo Qin, Weiqiang Chen, Fengrui Sun, Kebin Yang, Weibing Wu (2024). Enhanced adhesion strength of copper metallization on silicon heterojunction solar cell due to improved electrochemical reduction uniformity of ITO. Solar Energy Materials and Solar Cells.DOI
4. 夏少军，陈林根，孙丰瑞（2019）. 广义辐射传热有热漏换热过程■耗散最小化. 《工程热物理学报》.
5. 石瀚楠，谢志辉，孙丰瑞，陈林根，冯辉君（2019）. 树状脉管圆盘热沉的传热分析与构形设计. 《工程热物理学报》.
6. 王亮，谢志辉，孙丰瑞，陈林根（2019）. 基于多物理场耦合计算的正六边形微通道热沉构形研究. 《中国科学:技术科学》.
7. Susu Qiu, Zemin Ding, Lingen Chen, Fankai Meng, Fengrui Sun (2019). Optimal performance region of energy selective electron cooling devices consisting of three reservoirs. The European Physical Journal Plus.DOI
8. 王亮，谢志辉，王刚，冯辉君，孙丰瑞（2018）. 工质回流式微通道圆盘热沉的热有效性构形研究. 《节能》.
9. 倪何，覃海波，金家善，孙丰瑞（2018）. 基于差异演化和残差修正的离心泵特性辨识与汽蚀分析. 《上海交通大学学报》.
10. 王亮，谢志辉，孙丰瑞，陈林根（2018）. 高热流密度回流式圆盘热沉构形设计中的应力-形变分析. 《节能》.
11. Shaojun Xia, Lingen Chen, Fengrui Sun (2018). Entropy generation minimisation for heat exchangers with heat leakage. International Journal of Ambient Energy.DOI
12. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2018). Progress of constructal theory in China over the past decade. International Journal of Heat and Mass Transfer.DOI
13. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2018). Constructal operation cost minimization for in-line cylindrical pin-fin heat sinks. International Journal of Heat and Mass Transfer.DOI
14. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2018). Influences of external heat transfer and Thomson effect on the performance of TEG-TEC combined thermoelectric device. Science China Technological Sciences.DOI
15. Hannan Shi, Zhihui Xie, Lingen Chen, Fengrui Sun (2018). Constructal optimization for line-to-line vascular based on entropy generation minimization principle. International Journal of Heat and Mass Transfer.DOI
16. Lei Zhang, Lingen Chen, Shaojun Xia, Chao Wang, Fengrui Sun (2018). Entropy Generation Minimization for Reverse Water Gas Shift (RWGS) Reactors. Entropy.DOI
17. Yuehong Bi, Lingen Chen, Zemin Ding, Fengrui Sun (2018). Performance Optimization of Irreversible Air Heat Pumps Considering Size Effect. Journal of Thermal Science.DOI
18. Zhixiang Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2018). Optimization of the power, efficiency and ecological function for an air-standard irreversible Dual-Miller cycle. Frontiers in Energy.DOI
19. Lingen Chen, Chao Wang, Shaojun Xia, Fengrui Sun (2018). Thermodynamic analyses and optimizations of extraction process of CO2 from acidic seawater by using hollow fiber membrane contactor. International Journal of Heat and Mass Transfer.DOI
20. Zhixiang Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2018). Thermodynamic optimization for an air-standard irreversible Dual-Miller cycle with linearly variable specific heat ratio of working fluid. International Journal of Heat and Mass Transfer.DOI
21. Lingen Chen, Lei Zhang, Shaojun Xia, Fengrui Sun (2018). Entropy generation minimization for CO2 hydrogenation to light olefins. Energy.DOI
22. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2018). Influences of the Thomson Effect on the Performance of a Thermoelectric Generator-Driven Thermoelectric Heat Pump Combined Device. Entropy.DOI
23. 张磊，陈林根，夏少军，王超，孙丰瑞（2017）. CO2加氢合成低碳烯烃反应热力学分析. 《工程热物理学报》.
24. 尤江，陈林根，吴志祥，孙丰瑞（2017）. 包含多变过程的Dual-Miller循环有限时间热力学分析. 《节能》.
25. 冯元力，陈林根，孟凡凯，孙丰瑞（2017）. 汤姆逊效应对热电发电机驱动热电制冷机装置性能的影响. 《节能》.
26. 张凯，秦晓勇，陈林根，孙丰瑞（2017）. 热阻、热漏和内不可逆性对两级吸收式制冷循环性能的影响. 《太阳能学报》.
27. 陈林根，王俊华，孙丰瑞（2017）. 高炉余能余热驱动Brayton热电联产循环的密度性能. 《电力与能源》.
28. 谢志辉，范旭东，孙丰瑞，王刚（2017）. 强迫对流冷却圆柱体离散热源的构形优化研究. 《工程热物理学报》.
29. 王超，陈林根，夏少军，宋汉江，孙丰瑞（2017）. 中空纤维膜接触器脱出CO2过程熵产率最小化. 《工程热物理学报》.
30. 吴志祥，陈林根，戈延林，孙丰瑞（2017）. 工质非线性变比热比内可逆Dual-Miller循环功率、效率和生态学函数优化. 《电力与能源》.
31. 刘长鑫，谢志辉，孙丰瑞（2017）. 以热损失最小为目标的焦炉工序分析与优化. 《钢铁研究》.
32. 刘长鑫，谢志辉，孙丰瑞（2017）. 钢铁生产流程铁素流网络建模与仿真. 《钢铁研究》.
33. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2017). Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect. Journal of Non-Equilibrium Thermodynamics.DOI
34. Jiang You, Lingen Chen, Zhixiang Wu, Fengrui Sun (2017). Thermodynamic performance of Dual-Miller cycle (DMC) with polytropic processes based on power output, thermal efficiency and ecological function. Science China Technological Sciences.DOI
35. Lingen Chen, Shaojun Xia, Fengrui Sun (2017). Entropy generation minimization for isothermal crystallization processes with a generalized mass diffusion law. International Journal of Heat and Mass Transfer.DOI
36. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2017). Exergy analysis and optimization of coking process. Energy.DOI
37. Lingen Chen, Zemin Ding, Junle Zhou, Wenhua Wang, Fengrui Sun (2017). Thermodynamic performance optimization for an irreversible vacuum thermionic generator. The European Physical Journal Plus.DOI
38. Zhixiang Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2017). Power, efficiency, ecological function and ecological coefficient of performance of an irreversible Dual-Miller cycle (DMC) with nonlinear variable specific heat ratio of working fluid. The European Physical Journal Plus.DOI
39. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2017). Constructal design for helm-shaped fin with internal heat sources. International Journal of Heat and Mass Transfer.DOI
40. Lingen Chen, Kang Ma, Yanlin Ge, Fengrui Sun (2017). MINIMUM ENTROPY GENERATION PATH FOR LIGHT-DRIVEN ENGINE WITH [A]-[B] SYSTEM AND HEAT TRANSFER LAW. Environmental Engineering and Management Journal.DOI
41. 张磊，陈林根，孙丰瑞（2016）. 基于概率方法的化学反应驱动热机有限时间热力学分析. 《中国科学:技术科学》.
42. 熊兵，陈林根，孟凡凯，孙丰瑞（2016）. 烧结烟气余热驱动圆筒式两级热电发电装置热力学分析与优化. 《中国科学:技术科学》.
43. 丁泽民，陈林根，王文华，孙丰瑞（2016）. 闭式中冷回热燃气轮机循环经济性能优化. 《热力透平》.
44. 秦晓勇，陈林根，孙丰瑞（2016）. 基于分析的不可逆变温热源四温位吸收式热变换器循环生态学性能. 《太阳能学报》.
45. 伍文君，陈林根，谢志辉，孙丰瑞（2016）. 基于高导热材料非均匀分布的体点导热构形优化. 《中国科学:技术科学》.
46. 范旭东，谢志辉，孙丰瑞，杨爱波（2016）. 变物性条件下基于(火积)理论的圆柱体热源构形研究. 《工程热物理学报》.
47. 沈勋，陈林根，夏少军，孙丰瑞（2016）. 竖罐式和环冷式烧结矿冷却过程的数值模拟. 《中国科学:技术科学》.
48. 张子煜，秦晓勇，陈林根，孙丰瑞（2016）. 以降低能耗为目标的高炉炼铁工序的优化. 《钢铁研究》.
49. 刘泽淼，谢志辉，张泽龙，孙丰瑞（2016）. 焦化工序能耗及二氧化碳排放量计算与参数影响. 《钢铁研究》.
50. 倪栋梁，陈林根，张泽龙，孙丰瑞（2016）. 中冷后回热式布雷顿-逆布雷顿联合循环性能优化". 《热力透平》.
51. 吴志祥，陈林根，戈延林，孙丰瑞（2016）. 工质非线性变比热比不可逆Dual-Miller循环生态学目标函数优化. 《节能》.
52. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Thermal performance analysis of non-uniform height rectangular fin based on constructal theory and entransy theory. Science China Technological Sciences.DOI
53. Chunli Fan, Lin Zhang, Jia Wendou, Yang Li, Fengrui Sun (2016). INVERSE IDENTIFICATION OF EFFECTIVE THERMAL CONDUCTIVITY BASED ON SURFACE TEMPERATURE MEASUREMENT: AN ANALYSIS OF EFFECTING FACTORS. Heat Transfer Research.DOI
54. Lingen Chen, Xun Shen, Shaojun Xia, Fengrui Sun (2016). Thermodynamic analyses for recovering residual heat of high-temperature basic oxygen gas (BOG) by the methane reforming with carbon dioxide reaction. Energy.DOI
55. Shaojun Xia, Lingen Chen, Fengrui Sun (2016). Maximum cycle work output optimization for generalized radiative law Otto cycle engines. The European Physical Journal Plus.DOI
56. Shaojun Xia, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Entransy dissipation minimization for generalized heat exchange processes. Science China Technological Sciences.DOI
57. Lingen Chen, Aibo Yang, Zhihui Xie, Fengrui Sun (2016). Constructal entropy generation rate minimization for cylindrical pin-fin heat sinks. International Journal of Thermal Sciences.DOI
58. Chao Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2016). Comparison of air-standard rectangular cycles with different specific heat models. Applied Thermal Engineering.DOI
59. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal entransy dissipation rate minimization of a rectangular body with nonuniform heat generation. Science China Technological Sciences.DOI
60. Huijun Feng, Lingen Chen, Xiong Liu, Zhihui Xie, Fengrui Sun (2016). Generalized constructal optimization of strip laminar cooling process based on entransy theory. Science China Technological Sciences.DOI
61. Shaojun Xia, Lingen Chen, Fengrui Sun (2016). Optimization of equimolar reverse constant-temperature mass-diffusion process for minimum entransy dissipation. Science China Technological Sciences.DOI
62. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal design for a rectangular body with nonuniform heat generation. The European Physical Journal Plus.DOI
63. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Constructal heat transfer rate maximization for cylindrical pin-fin heat sinks. Applied Thermal Engineering.DOI
64. Junle Zhou, Lingen Chen, Zemin Ding, Fengrui Sun (2016). Analysis and optimization with ecological objective function of irreversible single resonance energy selective electron heat engines. Energy.DOI
65. Xiong Liu, Lingen Chen, Huijun Feng, Xiaoyong Qin, Fengrui Sun (2016). Constructal design of a blast furnace iron-making process based on multi-objective optimization. Energy.DOI
66. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2016). Optimization for sintering proportioning based on energy value. Applied Thermal Engineering.DOI
67. Junle Zhou, Lingen Chen, Zemin Ding, Fengrui Sun (2016). Exploring the optimal performances of irreversible single resonance energy selective electron refrigerators. The European Physical Journal Plus.DOI
68. Youhong Yu, Zemin Ding, Lingen Chen, Wenhua Wang, Fengrui Sun (2016). Power and efficiency optimization for an energy selective electron heat engine with double-resonance energy filter. Energy.DOI
69. Xiong Liu, Huijun Feng, Lingen Chen, Xiaoyong Qin, Fengrui Sun (2016). Hot metal yield optimization of a blast furnace based on constructal theory. Energy.DOI
70. Yanlin Ge, Lingen Chen, Fengrui Sun (2016). Progress in Finite Time Thermodynamic Studies for Internal Combustion Engine Cycles. Entropy.DOI
71. Lingen Chen, Dongliang Ni, Zelong Zhang, Fengrui Sun (2016). Exergetic performance optimization for new combined intercooled regenerative Brayton and inverse Brayton cycles. Applied Thermal Engineering.DOI
72. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal designs for insulation layers of steel rolling reheating furnace wall with convective and radiative boundary conditions. Applied Thermal Engineering.DOI
73. Xiong Liu, Lingen Chen, Huijun Feng, Fengrui Sun (2016). Constructal design for blast furnace wall based on the entransy theory. Applied Thermal Engineering.DOI
74. Shuwen Gong, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Constructal optimization of cylindrical heat sources with forced convection based on entransy dissipation rate minimization. Science China Technological Sciences.DOI
75. Chao Wang, Lingen Chen, Shaojun Xia, Fengrui Sun (2016). Maximum production rate optimization for sulphuric acid decomposition process in tubular plug-flow reactor. Energy.DOI
76. Lingen Chen, Fankai Meng, Fengrui Sun (2016). Thermodynamic analyses and optimization for thermoelectric devices: The state of the arts. Science China Technological Sciences.DOI
77. Chao Wang, Lingen Chen, Shaojun Xia, Fengrui Sun (2016). Optimal Concentration Configuration of Consecutive Chemical Reaction A ⇔ B ⇔ C for Minimum Entropy Generation. Journal of Non-Equilibrium Thermodynamics.DOI
78. 杨博，陈林根，孙丰瑞（2015）. 不可逆回热布雷顿CCHP装置FTT建模. 《热科学与技术》.
79. 刘雄，陈林根，冯辉君，孙丰瑞（2015）. 基于(火积)耗散率最小的高炉炉墙构形优化. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
80. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 动力锂离子电池热特性数值仿真与分析. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
81. 范旭东，谢志辉，孙丰瑞，陈林根（2015）. 线-线脉管微通道热沉的对流传热特性. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
82. 冯辉君，陈林根，谢志辉，孙丰瑞（2015）. 基于(火积)耗散率最小的T-Y形肋片构形优化. 《工程热物理学报》.
83. 王俊华，陈林根，戈延林，孙丰瑞（2015）. 不可逆简单MCBC在不同优化目标下的性能比较. 《热力透平》.
84. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 如何评价余热回收技术？ 《中国冶金报》.
85. 沈勋，陈林根，夏少军，孙丰瑞（2015）. 钢铁流程能耗分析及节能技术的研究进展. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
86. 张泽龙，陈林根，杨博，戈延林，孙丰瑞（2015）. 高炉渣余热驱动空气布雷顿循环热力学分析. 《中国冶金》.
87. 王超，陈林根，夏少军，孙丰瑞（2015）. 连续化学反应ABC最小熵产生优化. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
88. 王文华，陈林根，丁泽民，杨博，孙丰瑞（2015）. 恒温热源闭式燃气轮机中冷循环性能优化. 《工程热物理学报》.
89. 丁泽民，陈林根，王文华，孙丰瑞（2015）. 三类微型能量转换系统有限时间热力学性能优化的研究进展. 《中国科学:技术科学》.
90. 张泽龙，陈林根，王文华，戈延林，孙丰瑞（2015）. 回收熔渣余热的空气中冷布雷顿循环的热力学分析. 《钢铁研究》.
91. 张凯，陈林根，秦晓勇，孙丰瑞（2015）. 包含多变过程的不可逆普适往复式循环有限时间热力学分析. 《节能》.
92. 陈砚桥，倪何，曾凡明，孙丰瑞（2015）. 流体网络在线性能评估与故障诊断方法. 《海军工程大学学报》.
93. 夏少军，陈林根，孙丰瑞（2015）. 传热规律和热漏对换热过程熵产生最小化的影响. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
94. 刘长鑫，谢志辉，孙丰瑞，陈林根（2015）. 转炉炼钢工序的铁素流系统动力学分析. 《中国冶金》.
95. 丁泽民，陈林根，孙丰瑞（2015）. 不可逆半导体固态热离子制冷器性能分析和优化. 《热科学与技术》.
96. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 钢铁工业余热回收技术的评价指标体系. 《中国冶金》.
97. 贾文抖，范春利，孙丰瑞，杨立（2015）. 基于红外测温的内部点热源的识别. 《红外与激光工程》.
98. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Constructal optimization for leaf-like body based on maximization of heat transfer rate. International Communications in Heat and Mass Transfer.DOI
99. Huijun Feng, Lingen Chen, Xiong Liu, Zhihui Xie, Fengrui Sun (2015). Constructal optimization of a sinter cooling process based on exergy output maximization. Applied Thermal Engineering.DOI
100. Zemin Ding, Lingen Chen, Yanlin Ge, Fengrui Sun (2015). Performance optimization of total momentum filtering double-resonance energy selective electron heat pump. Physica A Statistical Mechanics and its Applications.DOI
101. Lei Zhang, Lingen Chen, Fengrui Sun (2015). Power optimization of chemically driven heat engine based on first and second order reaction kinetic theory and probability theory. Physica A Statistical Mechanics and its Applications.DOI
102. Xudong Fan, Zhihui Xie, Fengrui Sun, Lingen Chen (2015). Convective heat transfer characteristics of line-to-line vascular microchannel heat sink with temperature-dependent fluid properties. Applied Thermal Engineering.DOI
103. Chunli Fan, Hailiang Wang, Lin Zhang, Yang Li, Fengrui Sun (2015). A fake defect phenomenon in defect detection of thermographic NDT: a three-dimensional numerical analysis. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
104. Xiong Liu, Lingen Chen, Xiaoyong Qin, Fengrui Sun (2015). Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows. Energy.DOI
105. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entropy generation rate minimization for asymmetric vascular networks in a disc-shaped body. International Journal of Heat and Mass Transfer.DOI
106. Shuwen Gong, Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Constructal optimization of cylindrical heat sources surrounded with a fin based on minimization of hot spot temperature. International Communications in Heat and Mass Transfer.DOI
107. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Thermal efficiency maximization for H- and X-shaped heat exchangers based on constructal theory. Applied Thermal Engineering.DOI
108. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for “+” shaped high conductivity pathways over a square body. International Journal of Heat and Mass Transfer.DOI
109. Wenjun Wu, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Improvement of constructal tree-like network for “volume-point” heat conduction with variable cross-section conducting path and without the premise of optimal last-order construct. International Communications in Heat and Mass Transfer.DOI
110. Zelong Zhang, Lingen Chen, Bo Lun Yang, Yanlin Ge, Fengrui Sun (2015). Thermodynamic analysis and optimization of an air Brayton cycle for recovering waste heat of blast furnace slag. Applied Thermal Engineering.DOI
111. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for gas-turbine blade based on minimization of maximum thermal resistance. Applied Thermal Engineering.DOI
112. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). “Volume-point” mass transfer constructal optimization based on flow resistance minimization with cylindrical element. International Journal of Heat and Mass Transfer.DOI
113. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for X-shaped hot water network over a rectangular area. Applied Thermal Engineering.DOI
114. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for solid–gas reactors with heat and mass transfer in a disc-shaped body. International Journal of Heat and Mass Transfer.DOI
115. Xiaoyong Qin, Lingen Chen, Yanlin Ge, Fengrui Sun (2015). Thermodynamic modeling and performance analysis of the variable-temperature heat reservoir absorption heat pump cycle. Physica A Statistical Mechanics and its Applications.DOI
116. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for helm-shaped fin with inner heat sources. Science China Technological Sciences.DOI
117. Lingen Chen, Bo Lun Yang, Xun Shen, Zhihui Xie, Fengrui Sun (2015). Thermodynamic optimization opportunities for the recovery and utilization of residual energy and heat in China's iron and steel industry: A case study. Applied Thermal Engineering.DOI
118. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal optimization for a single tubular solid oxide fuel cell. Journal of Power Sources.DOI
119. Zemin Ding, Lingen Chen, Wenhua Wang, Yanlin Ge, Fengrui Sun (2015). Exploring the operation of a microscopic energy selective electron engine. Physica A Statistical Mechanics and its Applications.DOI
120. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). “Disc-point” heat and mass transfer constructal optimization for solid–gas reactors based on entropy generation minimization. Energy.DOI
121. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2015). System dynamics analysis on characteristics of iron-flow in sintering process. Applied Thermal Engineering.DOI
122. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entropy generation rate minimization for X-shaped vascular networks. International Journal of Thermal Sciences.DOI
123. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for triangular heat trees at micro and nanoscales. International Journal of Heat and Mass Transfer.DOI
124. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for a disc-shaped area based on minimum flow time of a flow system. International Journal of Heat and Mass Transfer.DOI
125. Lingen Chen, Xiaohui Wu, Qinghua Xiao, Yanlin Ge, Fengrui Sun (2015). LOCAL STABILITY OF A GENERALIZED IRREVERSIBLE CARNOT ENGINE WORKING AT THE MAXIMUM ECOLOGICAL FUNCTION. Environmental Engineering and Management Journal.DOI
126. Lingen Chen, Zemin Ding, Yanlin Ge, Fengrui Sun (2015). PERFORMANCE ANALYSIS FOR AN IRREVERSIBLE COMBINED THERMIONIC-THERMOELECTRIC GENERATOR WITH FINITE RATE HEAT TRANSFER. Environmental Engineering and Management Journal.DOI
127. 陈林根，杨博，谢志辉，王文华，孙丰瑞（2014）. 转炉煤气驱动开式燃气轮机CCHP装置FTT建模与优化. 《中国冶金》.
128. 熊兵，陈林根，戈延林，孙丰瑞（2014）. 包含多变过程的内可逆Otto循环有限时间热力学分析. 《电力与能源》.
129. 杨博，陈林根，戈延林，孙丰瑞（2014）. 开式回热燃气轮机热电冷联产装置性能优化. 《热力透平》.
130. 王文华，陈林根，戈延林，孙丰瑞（2014）. 开式燃气轮机中冷回热再热循环功率和效率优化. 《热力透平》.
131. 王文华，陈林根，丁泽民，杨博，孙丰瑞（2014）. 钢铁厂高炉煤气燃气轮机循环热力分析. 《热力透平》.
132. 夏少军，陈林根，孙丰瑞（2014）. 等摩尔双向等温传质过程积耗散最小化. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
133. 王超，陈林根，戈延林，孙丰瑞（2014）. 考虑工质非线性变比热时内可逆矩形循环性能分析. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
134. 秦晓勇，陈林根，孙丰瑞（2014）. 基于火用分析的不可逆吸收式热泵循环生态学目标及其性能. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
135. 孟凡凯，陈林根，孙丰瑞（2014）. 一种空冷式冲渣水余热热电发电装置及性能分析. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
136. Bing Xiong, Lingen Chen, Fankai Meng, Fengrui Sun (2014). Modeling and performance analysis of a two-stage thermoelectric energy harvesting system from blast furnace slag water waste heat. Energy.DOI
137. Xiaohui Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2014). Local stability of a non-endoreversible Carnot refrigerator working at the maximum ecological function. Applied Mathematical Modelling.DOI
138. Bo Lun Yang, Lingen Chen, Yanlin Ge, Fengrui Sun (2014). Exergy Performance Optimization of an Irreversible Closed Intercooled Regenerative Brayton Cogeneration Plant. Arabian Journal for Science and Engineering.DOI
139. Shaojun Xia, Lingen Chen, Fengrui Sun (2014). Endoreversible modeling and optimization of multistage isothermal chemical engines under linear mass transfer law via Hamilton–Jacobi–Bellman theory. International Journal of Low-Carbon Technologies.DOI
140. Huijun Feng, Lingen Chen, Zhihui Xie, Zemin Ding, Fengrui Sun (2014). Generalized constructal optimization for the secondary cooling process of slab continuous casting based on entransy theory. Science China Technological Sciences.DOI
141. Aibo Yang, Lingen Chen, Shaojun Xia, Fengrui Sun (2014). The optimal configuration of reciprocating engine based on maximum entransy loss. Chinese Science Bulletin.DOI
142. Zhihui Xie, Lingen Chen, Fengrui Sun (2014). Constructal optimization for an insulating wall combining heat flow, strength and volume. International Communications in Heat and Mass Transfer.DOI
143. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2014). Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions. Chinese Science Bulletin.DOI
144. Fankai Meng, Lingen Chen, Fengrui Sun, Bo Lun Yang (2014). Thermoelectric power generation driven by blast furnace slag flushing water. Energy.DOI
145. Huijun Feng, Lingen Chen, Zhihui Xie, Zemin Ding, Fengrui Sun (2014). Generalized constructal optimization for solidification heat transfer process of slab continuous casting based on heat loss rate. Energy.DOI
146. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2014). Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall. International Communications in Heat and Mass Transfer.DOI
147. Bo Lun Yang, Lingen Chen, Yanlin Ge, Fengrui Sun (2014). Exergy performance analyses of an irreversible two-stage intercooled regenerative reheated closed Brayton CHP plant. International Journal of Exergy.DOI
148. Yan LIU, Yuemin WANG, Longxiang ZHU, Fengrui Sun (2014). Optimal Design of Electromagnetic Acoustic Transducer Used to Generate Lamb Wave. DOAJ (DOAJ: Directory of Open Access Journals).
149. 陈林根，杨博，谢志辉，王文华，孙丰瑞（2013）. 转炉余能余热驱动开式燃气轮机CCHP装置FTT建模与优化. 《高等学校工程热物理第十届全国学术会议》.
150. 张泽龙，陈林根，戈延林，孙丰瑞（2013）. 焦炉煤气驱动的回热式燃气轮机装置热力学分析. 《高等学校工程热物理第十届全国学术会议》.
151. 张万里，陈林根，孙丰瑞（2013）. 开式双轴燃气轮机循环的热力学优化. 《热力透平》.
152. 杨博，陈林根，王文华，戈延林，孙丰瑞（2013）. 高炉余能余热驱动内可逆回热布雷顿循环热电冷联产装置的最优性能. 《燃气轮机技术》.
153. 王俊华，陈林根，孙丰瑞（2013）. 高炉余能余热驱动内可逆中冷回热Brayton热电联产循环经济性能分析. 《燃气轮机技术》.
154. 张泽龙，陈林根，孙丰瑞（2013）. 回热式布雷顿-两平行逆布雷顿联合循环第一定律分析与优化. 《燃气轮机技术》.
155. 丁泽民，陈林根，戈延林，孙丰瑞（2013）. 不可逆双谐振通道能量选择性电子制冷机热力学性能优化. 《热科学与技术》.
156. 刘雄，陈林根，秦晓勇，戈延林，孙丰瑞（2013）. 内可逆矩形循环有限时间热力学分析. 《节能》.
157. 杨博，陈林根，孙丰瑞（2013）. 高炉余能余热驱动不可逆中冷回热燃气轮机热电联产装置的经济性能研究. 《节能》.
158. 张泽龙，陈林根，戈延林，孙丰瑞（2013）. 焦炉煤气驱动回热式燃气轮机装置热力学分析. 《钢铁研究》.
159. 吴晓辉，陈林根，戈延林，孙丰瑞（2013）. 内可逆化学机最大功率时的局域稳定性分析. 《海军工程大学学报》.
160. Longxiang Zhu, Yuemin Wang, Fengrui Sun (2013). Single torsional guided wave excitation in pipes by frequency selection using magnetostrictive sensor technology. IEEE International Conference on Electronic Measurement & Instruments.DOI
161. Fengrui Sun (2013). Analysis and optimization of power and efficiency performances of endoreversible Lenoir cycle with constant-temperature heat reservoirs. Journal of Thermal Science and Technology.
162. Fengrui Sun (2013). Local stability analysis of endoreversible chemical engine working at maximum power output. Journal of Naval University of Engineering.
163. Fengrui Sun (2013). Exergoeconomic performance analysis for an endoreversible closed Brayton cycle combined cooling,heating and power generation plant driven by residual energy and heat of blast furnace. Energy Conservation Technology.
164. Fengrui Sun (2013). Optimal Exergy Performances of An Endoreversible Regenerative Brayton Cycle CCHP Plant Driven by Residual Energy and Heat of Blast Furnace. Gas Turbine Technology.
165. Fengrui Sun (2013). Exergoeconomic performance investigation of an irreversible intercooled regenerative gas turbine heat and power cogeneration plant driven by residual energy and heat of blast furnace. Energy Conservation Technology.
166. Fankai Meng, Lingen Chen, Fengrui Sun (2013). Effects of thermocouples’ physical size on the performance of the TEG–TEH system. International Journal of Low-Carbon Technologies.DOI
167. Zemin Ding, Lingen Chen, Fengrui Sun (2013). Heating load and COP optimization of a double resonance energy selective electron (ESE) heat pump. International Journal of Low-Carbon Technologies.DOI
168. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2013). Constructal optimization for “disc-point” heat conduction at micro and nanoscales. International Journal of Heat and Mass Transfer.DOI
169. Lingen Chen, Qinghua Xiao, Zhihui Xie, Fengrui Sun (2013). Constructal entransy dissipation rate minimization for tree-shaped assembly of fins. International Journal of Heat and Mass Transfer.DOI
170. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2013). Constructal Optimization for Tree-Shaped Fluid Networks in a Disc-Shaped Area Subjected to the Surface Area Constraint. Arabian Journal for Science and Engineering.DOI
171. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2013). “Disc-point” mass transfer Constructal optimizations with Darcy and Hagen–Poiseuille flows in porous media. Applied Mathematical Modelling.DOI
172. Junhua Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2013). Power and power density analyzes of an endoreversible modified variable-temperature reservoir Brayton cycle with isothermal heat addition. International Journal of Low-Carbon Technologies.DOI
173. Zhihui Xie, Lingen Chen, Fengrui Sun (2013). Constructal entropy generation rate minimization of line-to-line vascular networks with convective heat transfer. International Journal of Thermal Sciences.DOI
174. Wenhua Wang, Lingen Chen, Fengrui Sun (2013). Thermodynamic optimization of a triple-shaft open intercooled, recuperated gas turbine cycle. Part 2: power and efficiency optimization. International Journal of Low-Carbon Technologies.DOI
175. Lingen Chen, Wenhua Wang, Fengrui Sun (2013). Thermodynamic optimization of a triple-shaft open intercooled-recuperated gas turbine cycle. Part 1: description and modeling. International Journal of Low-Carbon Technologies.DOI
176. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2013). Constructal optimization of a disc-shaped body with cooling channels for specified power pumping. International Journal of Low-Carbon Technologies.DOI
177. L. Chen, Shaojun Xia, Fengrui Sun (2013). Maximum power output of multistage irreversible heat engines under a generalized heat transfer law by using dynamic programming. Scientia Iranica.DOI
178. Junhua Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2013). Ecological performance analysis of an endoreversible modified Brayton cycle. International Journal of Sustainable Energy.DOI
179. Zelong Zhang, Lingen Chen, Fengrui Sun (2013). Performance optimisation for two classes of combined regenerative Brayton and inverse Brayton cycles. International Journal of Sustainable Energy.DOI
180. 贺星，刘永葆，孙丰瑞（2012）. 基于改进Levenberg-Marquardt算法的燃气轮机特性拟合优化. 《海军工程大学学报》.
181. 王文华，陈林根，孙丰瑞（2012）. 具有空气冷却的中冷回热循环三轴燃气轮机热力学建模和性能优化. 《热科学与技术》.
182. 王文华，陈林根，戈延林，孙丰瑞（2012）. 燃气轮机循环有限时间热力学研究新进展. 《热力透平》.
183. Zhihui Xie, L G Chen, Fengrui Sun (2012). Constructal design of conducting body cooled by open cavity. Journal of the Energy Institute.DOI
184. Fengrui Sun (2012). Optimal fitting of gas turbine performance based on improved Levenberg-Marquardt method. Journal of Naval University of Engineering.
185. Fengrui Sun (2012). Thermodynamic modeling and performance optimization for intercooled-regenerated cycle triple-shaft gas turbine with air cooling. Journal of Thermal Science and Technology.
186. Fengrui Sun (2012). Geometry Identification of Fixed-depth Internal Heat Sources in Three-dimensional Test-piece Based on Surface Temperature Measurement. Infrared.
187. Fengrui Sun (2012). Experimental Research of the Aluminum Foil Influence on the Insulation Performance. Journal of Wuhan University of Technology-Mater Sci Ed.
188. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). Constructal optimization for H-shaped multi-scale heat exchanger based on entransy theory. Science China Technological Sciences.DOI
189. Xiaoyong Qin, Lingen Chen, Yanlin Ge, Fengrui Sun (2012). Finite Time Thermodynamic Studies on Absorption Thermodynamic Cycles: A State-of-the-Art Review. Arabian Journal for Science and Engineering.DOI
190. Yanlin Ge, Lingen Chen, Fengrui Sun (2012). Ecological Optimization of an Irreversible Otto Cycle. Arabian Journal for Science and Engineering.DOI
191. Lingen Chen, Kang Ma, Yanlin Ge, Fengrui Sun (2012). Optimal Configuration of a Bimolecular, Light-Driven Engine for Maximum Ecological Performance. Arabian Journal for Science and Engineering.DOI
192. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). “Volume-Point” Mass Transfer Constructal Optimization Based on Triangular Element. Arabian Journal for Science and Engineering.DOI
193. Yan Liu, Yuemin Wang, Chuanjun Shen, Fengrui Sun (2012). Matching Pursuit and Time Reversal Technique for Damage Detection Using Lamb Wave. International Conference on Control Engineering and Communication Technology.DOI
194. Xiaohui Wu, Lei Chen, Y. Ge, Fengrui Sun (2012). Local stability of an endoreversible heat pump with linear phenomenological heat transfer law working in an ecological regime. Scientia Iranica.DOI
195. Bo Lun Yang, Lingen Chen, Yanlin Ge, Fengrui Sun (2012). Finite-time exergoeconomic performance of a real intercooled regenerated gas turbine cogeneration plant. Part 2: heat conductance distribution and pressure ratio optimization. International Journal of Low-Carbon Technologies.DOI
196. Lingen Chen, Wenjun Wu, Fengrui Sun (2012). Constructal re-optimization of heat conduction with the triangular elemental area. International Journal of Low-Carbon Technologies.DOI
197. W. Zhang, Lei Chen, Fengrui Sun (2012). Thermodynamic optimization principle for open inverse Brayton cycle (refrigeration/heat pump cycle). Scientia Iranica.DOI
198. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle. Science China Technological Sciences.DOI
199. Yan Liu, Yuemin Wang, Chuanjun Shen, Fengrui Sun (2012). Damage detection for plate-like structure based on Lamb wave and time reversal theory. International Congress on Image and Signal Processing (CISP).DOI
200. Lingen Chen, Qinghua Xiao, Zhihui Xie, Fengrui Sun (2012). T-shaped assembly of fins with constructal entransy dissipation rate minimization. International Communications in Heat and Mass Transfer.DOI
201. Lingen Chen, Wanli Zhang, Fengrui Sun (2012). Thermodynamic optimization of an open cycle of an externally fired micro gas turbine. Part 2: Performance optimization. International Journal of Low-Carbon Technologies.DOI
202. Liang Chen, Fankai Meng, Fengrui Sun (2012). Maximum power and efficiency of an irreversible thermoelectric generator with a generalized heat transfer law. Scientia Iranica.DOI
203. Lingen Chen, Kang Ma, Yanlin Ge, Fengrui Sun (2012). Optimisation for forced cool-down processes with minimum cooling fluid mass. International Journal of Sustainable Energy.DOI
204. Shaojun Xia, L. Chen, Fengrui Sun (2012). Entransy dissipation minimization for one-way isothermal mass transfer processes with a generalized mass transfer law. Scientia Iranica.DOI
205. Z. Zhang, L. Chen, Fengrui Sun (2012). Energy performance optimization of combined Brayton and two parallel inverse Brayton cycles with regeneration before the inverse cycles. Scientia Iranica.DOI
206. Lingen Chen, Kang Ma, Fengrui Sun (2012). Optimal Paths for a Light-Driven Engine with [A]=[B] Reacting System and Generalized Radiative Heat Transfer Law. International Journal of Chemical Reactor Engineering.DOI
207. X. Liu, L. Chen, Y. Ge, Feng Wu, Fengrui Sun (2012). Fundamental optimal relation of a spin 1/2 quantum Brayton heat engine with multi-irreversibilities. Scientia Iranica.DOI
208. Y Ge, L Chen, Fengrui Sun (2012). Optimal path of piston motion of irreversible Otto cycle for minimum entropy generation with radiative heat transfer law. Journal of the Energy Institute.DOI
209. L. Chen, Shaoyuan Wei, Fengrui Sun (2012). The area-point constructal entransy dissipation rate minimization for a discrete variable cross-section conducting path. International Journal of Low-Carbon Technologies.DOI
210. W Zhang, L Chen, Fengrui Sun (2012). Thermodynamic optimisation for open regenerated inverse Brayton cycle (refrigeration/heat pump cycle). Journal of the Energy Institute.DOI
211. Lingen Chen, Fankai Meng, Yanlin Ge, Fengrui Sun (2012). Optimum variables selection of thermoelectric generator-driven thermoelectric refrigerator at different source temperature. International Journal of Ambient Energy.DOI
212. Xiaowei Liu, Lingen Chen, Yanlin Ge, Feng Wu, Fengrui Sun (2012). Fundamental optimal relation of a generalised irreversible quantum Carnot heat pump with harmonic oscillators. International Journal of Ambient Energy.DOI
213. Yuemin Wang, Longxiang Zhu, Chuanjun Shen, Fengrui Sun (2012). A theoretical computation model of magnetostrictive guided waves NDT output signals in ferromagnetic cylinder. IEEE International Conference on Information Science and Technology (ICIST).DOI
214. Bo Lun Yang, Lingen Chen, Fengrui Sun, Chih Wu (2012). Exergetic performance optimization of an endoreversible intercooled regenerated Brayton cogeneration plant. Part 2: Exergy output rate and exergy efficiency optimization. International Journal of Ambient Energy.DOI
215. Zemin Ding, Lingen Chen, Fengrui Sun (2012). Performance Analysis and Optimization of a Single-Barrier Solid-State Thermionic Refrigerator With External Heat Transfer. Heat Transfer Engineering.DOI
216. Lingen Chen, Chang Xin Liu, Fengrui Sun (2012). Performance of irreversible Meletis–Georgiou vane rotary engine cycle with variable specific heats of working fluid. International Journal of Sustainable Energy.DOI
217. Huijun Feng, Lingen Chen, Fengrui Sun (2012). “Volume-point” heat conduction constructal optimization based on entransy dissipation rate minimization with three-dimensional cylindrical element and rectangular and triangular elements on microscale and nanoscale. Science China Technological Sciences.DOI
218. Lingen Chen, Zelong Zhang, Fengrui Sun (2012). Thermodynamic Modeling for Open Combined Regenerative Brayton and Inverse Brayton Cycles with Regeneration before the Inverse Cycle. Entropy.DOI
219. Chunli Fan, Mingxin Zhang, Shuangxi Hu, Yang Li, Fengrui Sun (2012). Identification of Plate Surface Geometry: A Numerical and Experimental Study. Numerical Heat Transfer Part B Fundamentals.DOI
220. Yan Liu, Chuanjun Shen, Yuemin Wang, Fengrui Sun (2012). Guided Wave NDT Signal Recognition with Orthogonal Matching Pursuit Based on Modified Evolutionary Programming. AASRI Procedia.DOI
221. 马康，陈林根，孙丰瑞（2011）. 辐射传热定律下外燃机最大输出功优化. 《热能动力工程》.
222. 刘畅，陈林根，孙丰瑞（2011）. 内可逆工质恒比热Meletis-Georgiou循环有限时间热力学建模与性能优化. 《热力透平》.
223. 王文华，陈林根，孙丰瑞（2011）. 具有空气冷却的简单循环燃气轮机热力学建模和性能优化:(I)建模. 《热力透平》.
224. 杨博，陈林根，孙丰瑞（2011）. 恒温热源不可逆中冷回热布雷顿热电联产装置的火用经济性能优化. 《热能动力工程》.
225. 王俊华，陈林根，孙丰瑞（2011）. 再热Brayton循环效率特性分析. 《热能动力工程》.
226. Chuanjun Shen, Yuemin Wang, Zhou Fang-jun, Fengrui Sun (2011). Guided wave signal recognition by matching pursuit based on evolutionary programming algorithm. International Conference on Image Analysis and Signal Processing.DOI
227. Yuemin Wang, Longxiang Zhu, Luo Fan, Fengrui Sun (2011). Guided waves modes identification in pipes detection by application of the matching pursuit method. IEEE International Conference on Electronic Measurement & Instruments.DOI
228. Chuanjun Shen, Yuemin Wang, Zhou Fang-jun, Fengrui Sun (2011). Pipe defect sizing with matching pursuit based on modified dynamic differential evolution algorithm to recognize guided wave signal. IEEE International Conference on Electronic Measurement & Instruments.DOI
229. Shuangxi Hu, Wei Kou, Fan Chunli, Yang Li, Fengrui Sun, Wang Yanwu (2011). Steady temperature profile of skin under millimeter waves. IEEE International Conference on Computing, Control and Industrial Engineering.DOI
230. Yuemin Wang, Shen Lihua, Chuanjun Shen, Fengrui Sun (2011). Theoretical and experimental research on controlling guided waves propagation direction in pipes. IEEE International Conference on Electronic Measurement & Instruments.DOI
231. Zhou Fang-jun, Wang Yuemin, Chuanjun Shen, Fengrui Sun (2011). Numerical calculation of guided wave disperse curve in helix wire based on semi-analytical finite element method. IEEE International Conference on Electronic Measurement & Instruments.DOI
232. Shuangxi Hu, Fan Chunli, Wei Kou, Yang Li, Fengrui Sun, Deng Doudou (2011). Heating of rat skin by high power millimeter waves.DOI
233. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal optimization for “disc-to-point” heat conduction without the premise of optimized last-order construct. International Journal of Thermal Sciences.DOI
234. Fengrui Sun (2011). Constructal optimization of H-shaped vasculature with convective heat transfer based on minimization of entropy generation rate. Journal of Thermal Science and Technology.
235. Fengrui Sun (2011). Analytical solution of three dimensional "volume-point" heat conduction constructal optimization based on maximum thermal resistance minimization with circular high conductivity channel. Journal of Thermal Science and Technology.
236. Fengrui Sun (2011). Finite-Time Thermodynamic Modeling and Optimization of Endoreversible Meletis-Georgiou Cycle with Constant Specific Heat of Working Fluid. Thermal Turbine.
237. Fengrui Sun (2011). Thermodynamic Modeling and Performance Optimization for Simple-Cycle Gas Turbine with Air Cooling:(II) Optimizations. Thermal Turbine.
238. Huijun Feng, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for leaf-like fins. Science China Technological Sciences.DOI
239. Dan Xia, Lingen Chen, Fengrui Sun (2011). Unified Description of Isothermal Endoreversible Chemical Cycles with Linear Mass Transfer Law. International Journal of Chemical Reactor Engineering.DOI
240. Chang Liu, Lingen Chen, Fengrui Sun (2011). Influence of variable specific heats of working fluid on performance of an endoreversible Meletis–Georgiou cycle. International Journal of Ambient Energy.DOI
241. Hailiang Wang, Chunli Fan, Fengrui Sun (2011). Fake-Defect Phenomenon in Themographic Nondestructive Inspection of Inner-Plate Surface. Journal of Thermophysics and Heat Transfer.DOI
242. Shuangxi Hu, Chunli Fan, Yang Li, Fengrui Sun, Wei Kou (2011). A thermal model for heating of rat skin by millimeter waves.DOI
243. Zemin Ding, Lingen Chen, Fengrui Sun (2011). Modeling and performance analysis of energy selective electron (ESE) engine with heat leakage and transmission probability. Science China Physics Mechanics and Astronomy.DOI
244. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Engine performance improved by controlling piston motion: Linear phenomenological law system Diesel cycle. International Journal of Thermal Sciences.DOI
245. Fankai Meng, Liang Chen, Fengrui Sun (2011). Performance Prediction and Irreversibility Analysis of a Thermoelectric Refrigerator with Finned Heat Exchanger. Acta Physica Polonica A.DOI
246. Lingen Chen, Bo Lun Yang, Fengrui Sun, Chih Wu (2011). Exergetic performance optimisation of an endoreversible intercooled regenerated Brayton cogeneration plant. Part 1: thermodynamic model and parametric analysis. International Journal of Ambient Energy.DOI
247. D. Xia, L. Chen, Fengrui Sun (2011). Endoreversible Four-Reservoir Chemical Potential Transformer with Diffusive Mass Transfer Law. Acta Physica Polonica A.DOI
248. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for a heat generating volume cooled by forced convection. Chinese Science Bulletin.DOI
249. Yuehong Bi, Guozhen Xie, Lingen Chen, Fengrui Sun (2011). Heating load density optimization of an irreversible simple Brayton cycle heat pump coupled to counter-flow heat exchangers. Applied Mathematical Modelling.DOI
250. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for heat conduction based on a tapered element. Chinese Science Bulletin.DOI
251. Lingen Chen, Huijun Feng, Fengrui Sun (2011). Exergoeconomic performance optimization for a combined cooling, heating and power generation plant with an endoreversible closed Brayton cycle. Mathematical and Computer Modelling.DOI
252. Lingen Chen, Zemin Ding, Fengrui Sun (2011). Model of a total momentum filtered energy selective electron heat pump affected by heat leakage and its performance characteristics. Energy.DOI
253. Lingen Chen, TU You-ming, Fengrui Sun (2011). Exergetic efficiency optimization for real regenerated air refrigerators. Applied Thermal Engineering.DOI
254. Lingen Chen, Yanlin Ge, Fengrui Sun, Chih Wu (2011). Finite-time thermodynamic modelling and analysis for an irreversible Miller cycle. International Journal of Ambient Energy.DOI
255. Shaojun Xia, L. Chen, Fengrui Sun (2011). Endoreversible Modeling and Optimization of a Multistage Heat Engine System with a Generalized Heat Transfer Law via Hamilton-Jacobi-Bellman Equations and Dynamic Programming. Acta Physica Polonica A.DOI
256. Kang Ma, Lingen Chen, Fengrui Sun, Chih Wu (2011). Finite-time exergoeconomic performance analysis and optimisation for generalised irreversible combined heat pump cycles. International Journal of Ambient Energy.DOI
257. Huijun Feng, Lingen Chen, Fengrui Sun, Chih Wu (2011). Heating load and COP optimisations for a universal steady flow endoreversible heat pump model. International Journal of Ambient Energy.DOI
258. Zemin Ding, Lingen Chen, Fengrui Sun (2011). Performance optimization of a total momentum filtered energy selective electron (ESE) heat engine with double resonances. Mathematical and Computer Modelling.DOI
259. Lingen Chen, Zhihui Xie, Fengrui Sun (2011). Multiobjective constructal optimization of an insulating wall combining heat flow, strength and weight. International Journal of Thermal Sciences.DOI
260. Lingen Chen, Shaojun Xia, Fengrui Sun (2011). Optimizing piston velocity profile for maximum work output from a generalized radiative law Diesel engine. Mathematical and Computer Modelling.DOI
261. Fankai Meng, Lingen Chen, Fengrui Sun (2011). A numerical model and comparative investigation of a thermoelectric generator with multi-irreversibilities. Energy.DOI
262. Shuhuan Wei, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation minimization of round tube heat exchanger cross-section. International Journal of Thermal Sciences.DOI
263. Huijun Feng, Lingen Chen, Fengrui Sun (2011). Exergoeconomic optimal performance of an irreversible closed Brayton cycle combined cooling, heating and power plant. Applied Mathematical Modelling.DOI
264. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Hamilton-Jacobi-Bellman equations and dynamic programming for power-optimization of a multistage heat engine system with generalized convective heat transfer law. Chinese Science Bulletin.DOI
265. Jun Li, Lingen Chen, Fengrui Sun, Chih Wu (2011). Ecological performance of an endoreversible Carnot refrigerator with complex heat transfer law. International Journal of Ambient Energy.DOI
266. Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2011). Exergoeconomic performance of an endoreversible Carnot refrigerator with complex heat transfer law. International Journal of Ambient Energy.DOI
267. Xiaowei Liu, Lingen Chen, Feng Wu, Fengrui Sun (2011). Fundamental optimal relation of an irreversible quantum Carnot heat pump with spin-1/2 systems. Mathematical and Computer Modelling.DOI
268. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal design for a steam generator based on entransy dissipation extremum principle. Science China Technological Sciences.DOI
269. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Entransy dissipation minimization for a class of one-way isothermal mass transfer processes. Science China Technological Sciences.DOI
270. Zhihui Xie, Lingen Chen, Fengrui Sun (2011). Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization. Science China Technological Sciences.DOI
271. Lingen Chen, Shaojun Xia, Fengrui Sun (2011). Maximum Power Output of Multistage Continuous and Discrete Isothermal Endoreversible Chemical Engine System with Linear Mass Transfer Law. International Journal of Chemical Reactor Engineering.DOI
272. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for “disc-to-point” heat conduction. Chinese Science Bulletin.DOI
273. Wenhua Wang, Lingen Chen, Fengrui Sun (2011). Ecological optimisation of an irreversible-closed ICR gas turbine cycle. International Journal of Exergy.DOI
274. Yanlin Ge, Lingen Chen, Fengrui Sun (2011). Optimal paths of piston motion of irreversible diesel cycle for minimum entropy generation. Thermal Science.DOI
275. Lingen Chen, Zemin Ding, Fengrui Sun (2011). Optimum performance analysis of Feynman's engine as cold and hot ratchets. Journal of Non-Equilibrium Thermodynamics.DOI
276. 贺星，孙丰瑞（2010）. 布雷顿与斯特林联合循环的热力学性能优化. 《华北电力大学学报(自然科学版)》.
277. 贺星，孙丰瑞（2010）. 航空燃气轮机推力功势效率研究. 《热能动力工程》.
278. 张国立，杨立，孙丰瑞，张健（2010）. 管内插入网状肋强化换热的数值研究. 《动力工程学报》.
279. 丁泽民，陈林根，孙丰瑞（2010）. 空间周期性温度场中布朗热泵的热力学特性. 《中国科学:物理学 力学 天文学》.
280. 张万里，陈林根，孙丰瑞（2010）. 开式微型燃气轮机外燃循环的功率和效率优化. 《热力透平》.
281. 舒礼伟，陈林根，孙丰瑞（2010）. 不可逆反渗透分离过程的性能分析. 《热能动力工程》.
282. 倪何，程刚，孙丰瑞（2010）. 太阳能驱动的联合卡诺热机循环生态学性能研究. 《太阳能学报》.
283. 肖航，倪何，程刚，孙丰瑞（2010）. 船用蒸汽轮机键合图建模与仿真研究. 《系统仿真技术》.
284. 贺星，孙丰瑞，刘永葆，黄树红（2010）. 基于功势的燃气轮机广义效率研究. 《航空动力学报》.
285. Zhihui Xie, Lingen Chen, Fengrui Sun (2010). Geometry optimization of T-shaped cavities according to constructal theory. Mathematical and Computer Modelling.DOI
286. Ni He, Gang Cheng, Guo‐Qing Zhu, Fengrui Sun (2010). Study on Bond Graph-based Modeling Method of Thermo-fluid Network. Jisuanji fangzhen.
287. Fengrui Sun (2010). Finite time exergoeconomic performance analysis of combined Carnot heat engine cycle with heat resistance,heat leakages,internal irreversibility and supplemental combustion. Journal of Thermal Science and Technology.
288. Fengrui Sun (2010). Bond Graph-based Modeling and Simulation of Marine Steam Turbine. System Simulation Technology.
289. Fengrui Sun (2010). Study of the Thrust Work-potential Efficiency of an Aero Gas Turbine. Journal of Engineering for Thermal Energy and Power.
290. Qinghua Xiao, Lingen Chen, Fengrui Sun (2010). Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins. Science China Technological Sciences.DOI
291. Lingen Chen, Xuxian Kan, Fengrui Sun, Feng Wu, Fangzhong Guo (2010). Ecological performance optimization of a thermoacoustic heat engine. Redalyc (Universidad Autónoma del Estado de México).
292. Shaojun Xia, Lingen Chen, Fengrui Sun (2010). Finite-time exergy with a finite heat reservoir and generalized radiative heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
293. Lingen Chen, Huijun Feng, Fengrui Sun (2010). Heating load, COP, exergy loss rate, exergy output rate and ecological optimizations for a class of generalized irreversible universal heat pump cycles. Redalyc (Universidad Autónoma del Estado de México).
294. YU You-hong, Fengrui Sun (2010). Thermoeconomics cost modeling of marine gas turbine generating unit.DOI
295. Wei Kou, Fengrui Sun, Yang Li, Lingen Chen (2010). Application of BCC Algorithm and RBFNN in Identification of Defect Parameters.DOI
296. Shuhuan Wei, Lingen Chen, Fengrui Sun (2010). Constructal complex-objective optimization of electromagnet based on magnetic induction and maximum temperature difference. Redalyc (Universidad Autónoma del Estado de México).
297. Zhihui Xie, Lingen Chen, Fengrui Sun (2010). Constructal optimization of twice Y-shaped assemblies of fins by taking maximum thermal resistance minimization as objective. Science China Technological Sciences.DOI
298. Zemin Ding, Lingen Chen, Fengrui Sun (2010). Performance characteristic of energy selective electron (ESE) refrigerator with filter heat conduction. Redalyc (Universidad Autónoma del Estado de México).
299. Huijun Feng, Lingen Chen, Fengrui Sun (2010). Optimal ratios of the piston speeds for a finite speed endoreversible Carnot heat engine cycle. Redalyc (Universidad Autónoma del Estado de México).
300. Qinghua Xiao, Lingen Chen, Fengrui Sun (2010). Constructal entransy dissipation rate and flow-resistance minimizations for cooling channels. Science China Technological Sciences.DOI
301. Ni He, Gang Chen, Fengrui Sun (2010). The convergence strategies and pause matter for evolutionary modeling.
302. Lingen Chen, Dan Xia, Fengrui Sun (2010). Ecological Optimization of Generalized Irreversible Chemical Engines. International Journal of Chemical Reactor Engineering.DOI
303. Lingen Chen, Shaojun Xia, Fengrui Sun (2010). Maximum efficiency of an irreversible heat engine with a distributed working fluid and linear phenomenological heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
304. Zemin Ding, Lingen Chen, Fengrui Sun (2010). Power and efficiency performances of a micro thermal Brownian heat engine with and without external forces. Brazilian Journal of Physics.DOI
305. Lingen Chen, Zemin Ding, Fengrui Sun (2010). Performance analysis of a vacuum thermionic refrigerator with external heat transfer. Journal of Applied Physics.DOI
306. Kang Ma, Lingen Chen, Fengrui Sun (2010). Optimal paths for a light-driven engine with a linear phenomenological heat transfer law. Science China Chemistry.DOI
307. Yuehong Bi, Lingen Chen, Fengrui Sun (2010). Exergetic efficiency optimization for an irreversible heat pump working on reversed Brayton cycle. Pramana.DOI
308. Jun Li, Lingen Chen, Fengrui Sun (2010). Fundamental optimal relation of a generalized irreversible Carnot heat pump with complex heat transfer law. Pramana.DOI
309. 贺星，孙丰瑞，张仁兴（2009）. 基于推力功势的航空燃气轮机故障性能研究. 《航空动力学报》.
310. 贺星，孙丰瑞，刘永葆，余又红（2009）. 基于Hopfield神经网络的燃气轮机可靠性分配. 《华中科技大学学报(自然科学版)》.
311. 陶桂生，陈林根，孙丰瑞（2009）. 实际回热式布雷顿热电联产装置的经济性能——Ⅰ.循环模型与参数分析. 《燃气轮机技术》.
312. 贺星，刘永葆，孙丰瑞（2009）. 基于燃气马力的燃气轮机性能退化. 《华中科技大学学报(自然科学版)》.
313. 贺星，孙丰瑞，刘永葆，周密（2009）. 基于热力学第二定律的燃气轮机故障性能研究. 《燃气轮机技术》.
314. 余又红，刘永葆，孙丰瑞（2009）. 基于热经济学的舰船发电机组配置优化. 《海军工程大学学报》.
315. 刘晓威，陈林根，孙丰瑞（2009）. 线性唯象传热定律下广义不可逆卡诺热机的频率特性. 《热能动力工程》.
316. 宋汉江，陈林根，孙丰瑞（2009）. 辐射传热时活塞式气缸中加热气体的最大膨胀功. 《海军工程大学学报》.
317. 马康，陈林根，孙丰瑞（2009）. 广义不可逆联合制冷循环有限时间经济性分析与优化. 《太阳能学报》.
318. 李俊，陈林根，孙丰瑞（2009）. 内可逆正反向两热源循环复杂传热规律下的优化关系. 《太阳能学报》.
319. 陶桂生，陈林根，孙丰瑞（2009）. 内可逆四热源吸收式制冷机生态学最优性能. 《太阳能学报》.
320. 陶桂生，陈林根，孙丰瑞（2009）. 实际回热式布雷顿热电联产装置的火用经济性能——Ⅱ.热导率分配与压比优化. 《燃气轮机技术》.
321. 孟凡凯，陈林根，孙丰瑞（2009）. 热电发电机驱动热电制冷机联合系统最优性能. 《工程热物理学报》.
322. 陶桂生，陈林根，孙丰瑞（2009）. 内可逆回热式燃气轮机热电联产装置的(火用)经济性能优化. 《工程热物理学报》.
323. 陶桂生，陈林根，孙丰瑞（2009）. 不可逆闭式布雷顿热电联产装置经济性能优化. 《热能动力工程》.
324. 贺星，孙丰瑞，周密，刘永葆，余又红（2009）. 效率在燃气轮机气路故障诊断中的应用研究. 《燃气涡轮试验与研究》.
325. 贺星，孙丰瑞（2009）. 基于神经网络的燃气轮机可靠性预计研究. 《燃气轮机技术》.
326. Lingen Chen, Shaojun Xia, Fengrui Sun (2009). Optimal paths for minimizing entropy generation during heat transfer processes with a generalized heat transfer law. Journal of Applied Physics.DOI
327. Fengrui Sun (2009). Study on Effect of KH-RT Model on High Pressure Spray Characteristics Simulation. Jisuanji fangzhen.
328. Fengrui Sun (2009). A research of gas turbine reliability forecasting based on neural networks. Gas Turbine Technology.
329. Fengrui Sun (2009). Maximum expansion work of heated gas inside a cylinder with a piston and radiative heat transfer. Journal of Naval University of Engineering.
330. Fengrui Sun (2009). Application of Fuzzy Tuning to Load Control of Marine Steam Power Plant. Jisuanji fangzhen.
331. Fengrui Sun (2009). Relationship between Frequency Selection and Pipe Characteristics for Guided Waves NDT.
332. Fengrui Sun (2009). New Analysis of Close-contact Melting Inside a Cylinder Tube with Non-isothermal Wall. Yingyong jichu yu gongcheng kexue xuebao.
333. Fengrui Sun (2009). Influence of Contact Resistance on Stator Thermal Field of Asynchronous Motor. Small & Special Electrical Machines.
334. Fengrui Sun (2009). Dynamic Mathematic Model and Simulation for a Certain Type Naval Deaerator. Jisuanji fangzhen.
335. Zhihui Xie, Lingen Chen, Fengrui Sun (2009). Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective. Science China Technological Sciences.DOI
336. Xiaowei Liu, Lingen Chen, Feng Wu, Fengrui Sun (2009). Ecological optimization of an irreversible harmonic oscillators Carnot heat engine. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
337. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Maximum power output of a class of irreversible non-regeneration heat engines with a non-uniform working fluid and linear phenomenological heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
338. Yuansong Zhao, Wenzhen Chen, Fengrui Sun (2009). Effects of convection and density difference on contact melting around a cylinder. Energy Conversion and Management.DOI
339. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Optimization for entransy dissipation minimization in heat exchanger. 《中国科学通报：英文版》.DOI
340. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Optimal configuration of a finite mass reservoir isothermal chemical engine for maximum work output with linear mass transfer law. Redalyc (Universidad Autónoma del Estado de México).
341. Kang Ma, Lingen Chen, Fengrui Sun (2009). Profit rate performance optimization for a generalized irreversible combined refrigeration cycle. Sadhana.DOI
342. Shuhuan Wei, Lingen Chen, Fengrui Sun (2009). Constructal multidisciplinary optimization of electromagnet based on entransy dissipation minimization. Science China Technological Sciences.DOI
343. Yuehong Bi, Tingwei Guo, Liang Zhang, Lingen Chen, Fengrui Sun (2009). Entropy generation minimization for charging and discharging processes in a gas-hydrate cool storage system. Applied Energy.DOI
344. Lingen Chen, Fankai Meng, Fengrui Sun (2009). Effect of heat transfer on the performance of a thermoelectric heat pump driven by a thermoelectric generator. Redalyc (Universidad Autónoma del Estado de México).
345. Liwei Shu, Lingen Chen, Fengrui Sun (2009). The minimum heat consumption for heat-driven binary separation processes with linear phenomenological heat transfer law. Science China Chemistry.DOI
346. Xuan Chen, Yang Li, Fengrui Sun (2009). Research of infrared stealth criterion of targets based on signal-to-noise ratio. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
347. Chunli Fan, Fengrui Sun, Li Yang (2009). Simple Numerical Method for Multidimensional Inverse Identification of Heat Flux Distribution. Journal of Thermophysics and Heat Transfer.DOI
348. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Maximum power configuration for multireservoir chemical engines. Journal of Applied Physics.DOI
349. Lingen Chen, Shuhuan Wei, Fengrui Sun (2009). Constructal entransy dissipation minimization of an electromagnet. Journal of Applied Physics.DOI
350. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). The optimal path of piston motion for Otto cycle with linear phenomenological heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
351. Chunli Fan, Fengrui Sun, Yang Li (2009). A quantitative identification technique for a two‐dimensional subsurface defect based on surface temperature measurement. Heat Transfer-Asian Research.DOI
352. Jun Li, Lingen Chen, Fengrui Sun (2009). Optimal configuration for a finite high-temperature source heat engine cycle with the complex heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
353. Yuansong Zhao, Wenzhen Chen, Fengrui Sun (2009). Study on Contact Melting Inside an Elliptical Tube With Nonisothermal Wall. ASME Journal of Heat and Mass Transfer.DOI
354. Lingen Chen, Hanjiang Song, Fengrui Sun, Shengbing Wang (2009). Optimal configuration of heat engines for maximum efficiency with generalized radiative heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
355. Yuehong Bi, Lingen Chen, Fengrui Sun (2009). Exergy-based ecological optimization for an endoreversible variable-temperature heat reservoir air heat pump cycle. Redalyc (Universidad Autónoma del Estado de México).
356. Chunli Fan, Fengrui Sun, Li Yang (2009). A simple method for inverse estimation of surface temperature distribution on a flat plate. Inverse Problems in Science and Engineering.DOI
357. Chunli Fan, Fengrui Sun, Yang Li (2009). Conductivity-Based Scheme for Identification of an Inner Pipe Boundary from Temperature Measurements. Journal of Thermophysics and Heat Transfer.DOI
358. 孟凡凯，陈林根，孙丰瑞（2008）. 热电发电机驱动热电热泵联合循环热力学分析. 《热能动力工程》.
359. 余又红，孙丰瑞，刘永葆（2008）. 基于动态仿真的COGAG装置负荷效率特性分析. 《船舶工程》.
360. 胡继敏，金家善，孙丰瑞（2008）. 涡轮增压机组的功率平衡计算方法. 《海军工程大学学报》.
361. 李俊，陈林根，孙丰瑞（2008）. 线性唯象传热规律下复杂系统的热力学优化. 《热能动力工程》.
362. 陈业初，王文华，陈林根，孙丰瑞（2008）. 中冷回热燃气轮机循环换热器热导率最优分配——生态学性能优化. 《燃气轮机技术》.
363. Chunli Fan, Fengrui Sun, Yang Li (2008). A new computational scheme on quantitative inner pipe boundary identification based on the estimation of effective thermal conductivity. Journal of Physics D Applied Physics.DOI
364. Fengrui Sun (2008). Study on a method of echo signal processing for guided waves nondestructive testing of pipes. Journal of Naval University of Engineering.
365. Fengrui Sun (2008). Study on the Application of Inverse Heat Conduction Problem on the Temperature Field of Motor. Laser & Infrared.
366. Fengrui Sun (2008). Inverse Heat Conduction Problem of Inherent Defect Based on the Levenberg-Marquardt Method. Guangdian gongcheng.
367. Fengrui Sun (2008). Simulated visualization of guided wave propagation in pipes. Journal of Naval University of Engineering.
368. Chunli Fan, Fengrui Sun, Yang Li (2008). An Algorithm Study on Inverse Identification of Interfacial Configuration in a Multiple Region Domain. ASME Journal of Heat and Mass Transfer.DOI
369. Chunli Fan, Fengrui Sun, Li Yang (2008). A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement. Chinese Journal of Chemical Engineering.DOI
370. Lihua Shen, Yuemin Wang, Fengrui Sun (2008). Study on feasibility of pressure pipe guided wave NDT based on magnetostrictive effect. Proceedings/Proceedings - IEEE Ultrasonics Symposium.DOI
371. Hanjiang Song, Lingen Chen, Fengrui Sun (2008). Optimal configuration of a class of endoreversible heat engines for maximum efficiency with radiative heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
372. Shuhuan Wei, Lingen Chen, Fengrui Sun (2008). “Volume-Point” heat conduction constructal optimization with entransy dissipation minimization objective based on rectangular element. Science China Technological Sciences.DOI
373. Wenzhen Chen, Yuansong Zhao, Lei Luo, Fengrui Sun (2008). Unified Formulation for Contact Melting Inside Symmetric Enclosure. Journal of Thermophysics and Heat Transfer.DOI
374. Miao Gong, Wenzhen Chen, Yuansong Zhao, Bo Zhu, Fengrui Sun (2008). Analysis of contact melting around a horizontal elliptical cylinder heat source. Progress in Natural Science Materials International.DOI
375. 余又红，王义，孙丰瑞，张仁兴（2007）. 舰用中冷回热燃气轮机装置动态性能分析. 《海军工程大学学报》.
376. 张万里，陈林根，孙丰瑞（2007）. 一类广义不可逆普适热机循环的生态学性能. 《燃气轮机技术》.
377. 余又红，孙丰瑞，刘永葆（2007）. 舰用燃气轮机的热经济性分析. 《燃气轮机技术》.
378. 王文华，陈林根，孙丰瑞（2007）. 恒温热源不可逆闭式中冷回热燃气轮机循环的生态学优化. 《动力工程学报》.
379. 秦晓勇，陈林根，何琳，孙丰瑞（2007）. 吸收式热力循环有限时间热力学研究的进展. 《制冷》.
380. 秦晓勇，陈林根，何琳，孙丰瑞（2007）. 吸收式热变换器循环热力学模型及优化应用. 《太阳能学报》.
381. 王剑平，杨自春，孙丰瑞，陈国兵，杨毅（2007）. 舰用锅炉炉膛性能优化设计研究. 《舰船科学技术》.
382. 陈文振，刘镇，陈志云，刘峰，孙丰瑞（2007）. 水平圆管内相变材料接触熔化分析. 《太阳能学报》.
383. 倪何，程刚，孙丰瑞（2007）. 某型船用汽轮机本体模块化建模和仿真. 《船舶工程》.
384. 戈延林，陈林根，孙丰瑞（2007）. 多孔介质发动机再热循环有限时间热力学分析. 《热科学与技术》.
385. Fengrui Sun (2007). Modular modeling and simulation for a certain type marine steam turbine. Ship Engineering.
386. Fengrui Sun (2007). Study on Surface Thermal Character of Fore-and-aft Crack Defect in the Weld. Laser & Infrared.
387. Fengrui Sun (2007). Numerical simulation of infrared nondestructive testing based on transient heating with high energy. Guangdian gongcheng.
388. Fengrui Sun (2007). Experimental Study and Model Modification on High Pressure Common Rail Fuel Spray Characteristics. Vehicle Engine.
389. Wenzhen Chen, Yuansong Zhao, Fengrui Sun, Zhiyun Chen, Miao Gong (2007). Analysis of ΔT driven contact melting of phase change material around a horizontal cylinder. Energy Conversion and Management.DOI
390. Hanjiang Song, Lingen Chen, Fengrui Sun (2007). Optimal expansion of a heated working fluid for maximum work output with generalized radiative heat transfer law. Journal of Applied Physics.DOI
391. Chunli Fan, Fengrui Sun, Yang Li (2007). An algorithm study on the identification of a pipeline's irregular inner boundary based on thermographic temperature measurement. Measurement Science and Technology.DOI
392. Feng Wu, Lingen Chen, Shuang Ying Wu, Fengrui Sun (2007). Thermodynamic performance of a laser cryocooler. The Journal of Chemical Physics.DOI
393. Wenzhen Chen, Bo Zhu, Zhiyun Chen, Haofeng Li, Fengrui Sun (2007). New analysis of contact melting of phase change material around a hot sphere. Heat and Mass Transfer.DOI
394. 周圣兵，陈林根，孙丰瑞（2006）. 基于三角形单元体的构形理论经济学研究. 《热能动力工程》.
395. 龚建政，李伟，孙丰瑞，张仁兴（2006）. 乌克兰UGT25000燃气轮机试验运行经验及技术改进措施. 《热能动力工程》.
396. 戈延林，陈林根，孙丰瑞（2006）. 工质变比热条件下内燃机循环普适特性. 《工程热物理学报》.
397. 倪何，孙丰瑞，陈林根（2006）. 具有热阻和热漏的再热布雷顿循环性能分析. 《燃气轮机技术》.
398. 舒礼伟，陈林根，孙丰瑞（2006）. 传热传质过程和设备的有限时间热力学优化. 《热能动力工程》.
399. 倪何，孙丰瑞，陈林根（2006）. 具有热阻、热漏和内不可逆性的联合卡诺热机生态学优化. 《海军工程大学学报》.
400. 余又红，王义，孙丰瑞，戴明强（2006）. 中冷回热循环燃气轮机动态仿真研究. 《计算机仿真》.
401. Fengrui Sun (2006). Study of numerical method determining inner temperature rise of asynchronous motor based on thermographic measurement. Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University.
402. Fengrui Sun (2006). PERFORMANCE OF AN ABSORPTION HEAT-TRANSFORMER WITH DIFFERENT HEAT TRANSFER LAW. Chinese Journal of Mechanical Engineering.
403. Fengrui Sun (2006). Temperature Rise Estimation in Squirrel-Cage Induction Motor Based on Inverse Heat Conduction Analysis. Dianzi qijian.
404. Fengrui Sun (2006). Economics Study of Configuration Theory Based on Triangular Elements. Journal of Engineering for Thermal Energy and Power.
405. Fengrui Sun (2006). Efficiency Optimization of a Real Closed Intercooled Regenerated Gas Turbine Cycle. Proceedings of the CSEE.
406. Fengrui Sun (2006). Finite-time Thermodynamic Optimization of Heat and Mass Transfer Process and Relevant Equipment. Journal of Engineering for Thermal Energy and Power.
407. Fengrui Sun (2006). Study on Nondestructive Identification of Heat Source. Infrared Technology.
408. Fengrui Sun (2006). Study on the Surface Temperature Rise of Asynchronous Motor. Laser & Infrared.
409. Fengrui Sun (2006). Performance Analysis for a Combined Camot and Rankine Heat Engine Cycle with Heat Resistance,Heat Leakage and Supplemental Combustion. Turbine Technology.
410. Fengrui Sun (2006). Numerical Simulation Research of Infrared Nondestructive Testing on the Resistive and Capacitive Defects Inside Material. Laser & Infrared.
411. Hanjiang Song, Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2006). Optimal configuration of a class of endoreversible heat engines with linear phenomenological heat transfer law [q∝Δ(T−1)]. Journal of Applied Physics.DOI
412. Feng Wu, Lingen Chen, Shuang Ying Wu, Fengrui Sun, Chih Wu (2006). Performance of an irreversible quantum Carnot engine with spin 1∕2. The Journal of Chemical Physics.DOI
413. Lei Chen, J. Wang, Fengrui Sun, Chun‐Mei Wu (2006). Power density optimisation of an endoreversible closed variable-temperature heat reservoir intercooled regenerated Brayton cycle. International Journal of Ambient Energy.DOI
414. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu, Fangzhong Guo (2006). Optimization criteria for an irreversible quantum Brayton engine with an ideal Bose gas. Journal of Applied Physics.DOI
415. Chunli Fan, Fengrui Sun, Lijun Yang (2006). Investigation on nondestructive evaluation of pipelines using infrared thermography.DOI
416. Chunli Fan, Fengrui Sun, Yang Li (2006). A general quantitative identification algorithm of subsurface defect for infrared thermography.DOI
417. 戈延林，陈林根，孙丰瑞（2005）. 工质变比热和传热损失对Diesel循环性能的影响. 《海军工程大学学报》.
418. 王文华，陈林根，孙丰瑞（2005）. 燃气轮机中冷循环功率和功率密度优化比较. 《热科学与技术》.
419. 秦晓勇，陈林根，孙丰瑞（2005）. 不可逆吸收式热泵循环的基本优化关系及性能分析. 《太阳能学报》.
420. 秦晓勇，陈林根，孙丰瑞（2005）. 内可逆四热源吸收式热变换器的基本优化关系及其性能分析. 《太阳能学报》.
421. 王剑平，周国义，孙丰瑞（2005）. 大气温度对涡轮增压机组性能影响的分析. 《燃气轮机技术》.
422. 王文华，陈林根，孙丰瑞（2005）. 内可逆闭式中冷回热布雷顿循环效率优化. 《海军工程大学学报》.
423. 李军，陈林根，孙丰瑞（2005）. 两级热电热机的有限时间热力学分析. 《热能动力工程》.
424. 王俊华，陈林根，孙丰瑞（2005）. 变温热源内可逆中冷回热布雷顿循环功率密度分析. 《燃气轮机技术》.
425. 余又红，王义，孙丰瑞，张仁兴（2005）. 回热循环燃气轮机中回热器的动态特性研究. 《海军工程大学学报》.
426. Fengrui Sun (2005). Efficiency optimization of an endoreversible closed intercooled regenerated Brayton cycle. Journal of Naval University of Engineering.
427. Fengrui Sun (2005). Ecological Optimization for Irreversible Carnot Pump. Journal of Jiangsu Teachers University of Technology.
428. Fengrui Sun (2005). Study of Defects in the Inner Wall of Cylinder-shaped Equipment by Means of Infrared Thermal Diagnosis. Infrared Technology.
429. Fengrui Sun (2005). Study on Effect of Defect to Computation of Inner Surface Temperature Based on Infrared Temperature Measurement. Infrared Technology.
430. Xinzhen Qin, Lei Chen, Fengrui Sun, Chuansong Wu (2005). Performance of an endoreversible four-heat-reservoir absorption heat-transformer with a generalized heat transfer law. International Journal of Ambient Energy.DOI
431. Lei Chen, Shangbo Zhou, Fengrui Sun, Chun‐Mei Wu (2005). Performance optimisation for an irreversible variable-temperature heat reservoir air refrigerator. International Journal of Ambient Energy.DOI
432. Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2005). Effect of heat transfer on the performance of two-stage semiconductor thermoelectric refrigerators. Journal of Applied Physics.DOI
433. Wenzhen Chen, Haofeng Li, Ming Gao, Zhen Liu, Fengrui Sun (2005). The pressure melting of ice around a horizontal elliptical cylinder. Heat and Mass Transfer.DOI
434. J. Zhou, Lei Chen, Fengrui Sun, Chuansong Wu (2005). Optimal power output and entropy generation rate for an endoreversible Carnot cycle using a linear phenomenological heat transfer law. International Journal of Ambient Energy.DOI
435. Xinzhen Qin, L. Chen, Fengrui Sun, Chuansong Wu (2005). Compromise optimization between heating load and entropy production rate for endoreversible absorption heat pumps. International Journal of Ambient Energy.DOI
436. 王文华，陈林根，孙丰瑞（2004）. 内可逆闭式中冷回热布雷顿循环功率效率特性. 《海军工程大学学报》.
437. 王文华，陈林根，孙丰瑞（2004）. 开式燃气轮机中冷循环热力学优化. 《机械工程学报》.
438. 王文华，陈林根，孙丰瑞（2004）. 恒温热源不可逆闭式中冷回热燃气轮机循环的功率和效率. 《太阳能学报》.
439. 周建平，陈林根，孙丰瑞（2004）. 广义不可逆卡诺热机的生态学最优性能. 《太阳能学报》.
440. 李军，陈林根，孙丰瑞（2004）. 广义不可逆卡诺热机的有限时间(火用)经济性能分析. 《太阳能学报》.
441. 周圣兵，陈林根，孙丰瑞（2004）. 构形理论:广义热力学优化的新方向之一. 《热科学与技术》.
442. 李军，陈林根，孙丰瑞（2004）. 两级热电热泵的有限时间热力学分析. 《热科学与技术》.
443. 范春利，曲伟，孙丰瑞，马同泽（2004）. 重力对微槽平板热管传热性能的影响. 《热能动力工程》.
444. 秦晓勇，陈林根，孙丰瑞（2004）. 内可逆四热源吸收式热泵生态学最优性能. 《热能动力工程》.
445. 罗俊，陈林根，孙丰瑞（2004）. 给定通流部分形状时多级轴流压气机效率优化. 《燃气轮机技术》.
446. 王文华，陈林根，孙丰瑞（2004）. 恒温热源条件下不可逆闭式中冷回热布雷顿循环的功率优化. 《燃气轮机技术》.
447. 李军，陈林根，孙丰瑞（2004）. 两级热电制冷机的有限时间热力学分析. 《低温工程》.
448. Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimum design of a subsonic axial-flow compressor stage. Applied Energy.DOI
449. Chunli Fan, Fengrui Sun, Yang Li, Lingen Chen, Wei Qu, Tongze Ma (2004). Experimental Investigation of Flat Miniature Heat Pipes with Three Kinds of Micro Grooves. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
450. Fengrui Sun, Tongze Ma (2004). The Influence of Gravitation on the Heat Transfer Performance of Micro-grooved Flat-plate Heat Pipes. Journal of Engineering for Thermal Energy and Power.
451. Fengrui Sun (2004). Diagnostic Availability Research of Infrared Fault Diagnosis of Machine and Electric Device. Mechanical & Electrical Engineering Magazine.
452. Fengrui Sun (2004). Constructal theory: One of new orientations of general thermodynamics optimization. Journal of Thermal Science and Technology.
453. Fengrui Sun (2004). The Influence of Heat Resistance, Heat Leak and Internal Irreversibility on the Performance of a Four-Heat-Reservoir Absorption Refrigeration Cycle.
454. Fengrui Sun (2004). Efficiency Optimization for an Irreversible Closed Intercooled Regenerated Brayton Cycle. Gas Turbine Experiment and Research.
455. Fengrui Sun (2004). Efficiency Optimization of an Axial Flow Multistage Compressor for the Fixed Configuration of the Flow Path. Gas Turbine Technology.
456. Fengrui Sun (2004). Optimum Allocation of Heat Exchanger Area of a Thermoelectric Heat Pump. Refrigeration.
457. Fengrui Sun (2004). Ecological Optimal Performance of Endoreversible Four-heat-source Absorption Type of Heat Pumps. Journal of Engineering for Thermal Energy and Power.
458. Fengrui Sun (2004). The Effect of Heat Transfer Law on the Performance of an Endoreversible Four-heat-reservoir Absorption Heat-transformer. Low Temperature and Specialty Gases.
459. Lingen Chen, Zhu Xiaoqin, Fengrui Sun, Chih Wu (2004). Ecological optimization for generalized irreversible Carnot refrigerators. Journal of Physics D Applied Physics.DOI
460. Lingen Chen, Xiaoyong Qin, Fengrui Sun, Chih Wu (2004). Irreversible absorption heat-pump and its optimal performance. Applied Energy.DOI
461. Yanlin Ge, Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermodynamic simulation of performance of an Otto cycle with heat transfer and variable specific heats of working fluid. International Journal of Thermal Sciences.DOI
462. Yanlin Ge, Lingen Chen, Fengrui Sun, Chih Wu (2004). Reciprocating heat-engine cycles. Applied Energy.DOI
463. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal performance of a generalized irreversible Carnot-engine. Applied Energy.DOI
464. Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermoelectric-generator with linear phenomenological heat-transfer law. Applied Energy.DOI
465. Fengrui Sun, Xiaoyong Qin, Lingen Chen, Chih Wu (2004). Optimization between heating load and entropy-production rate for endoreversible absorption heat-transformers. Applied Energy.DOI
466. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermo-economic optimization of an endoreversible four-heat-reservoir absorption-refrigerator. Applied Energy.DOI
467. Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermo-economics for endoreversible heat-engines. Applied Energy.DOI
468. Lingen Chen, Jun Luo, Fengrui Sun, Chih Wu (2004). Optimized efficiency axial-flow compressor. Applied Energy.DOI
469. Mengquan Tan, Lingen Chen, Jin Jia-shan, Fengrui Sun, Chih Jung Wu (2004). Bond-graph-based fault-diagnosis for a marine condensate–booster–feedwater system. Applied Energy.DOI
470. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Frequency-dependent performance of an endoreversible Carnot engine with a linear phenomenological heat-transfer law. Applied Energy.DOI
471. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2004). Power optimization of an irreversible closed intercooled regenerated brayton cycle coupled to variable-temperature heat reservoirs. Applied Thermal Engineering.DOI
472. W. Wang, Lei Chen, Fengrui Sun, Chuansong Wu (2004). Heat transfer effect on the performance of an endoreversible closed intercooled regenerated Brayton cycle. International Journal of Ambient Energy.DOI
473. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2004). Power optimization of an endoreversible closed intercooled regenerated Brayton cycle. International Journal of Thermal Sciences.DOI
474. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2004). The influence of heat resistance and heat leak on the performance of a four-heat-reservoir absorption refrigerator with heat transfer law of Q∝Δ(T−1). International Journal of Thermal Sciences.DOI
475. Lingen Chen, Tong Zheng, Fengrui Sun, Chih Wu (2004). Optimal Cooling Load and COP Relationship of a Four-Heat-Reservoir Endoreversible Absorption Refrigeration Cycle. Entropy.DOI
476. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal Performance of an Endoreversible Four-Heat-Reservoir Absorption Heat-Transformer. Open Systems & Information Dynamics.DOI
477. Youhong Yu, Lingen Chen, Fengrui Sun, Chih Wu (2004). Matlab/Simulink-based simulation for digital-control system of marine three-shaft gas-turbine. Applied Energy.DOI
478. Liwei Shu, Lingen Chen, Jin Jia-shan, Jun Yu, Fengrui Sun, Chih Wu (2004). Functional reliability simulation for a power-station's steam-turbine. Applied Energy.DOI
479. Lingen Chen, Ye Li, Fengrui Sun, Chih Wu (2004). Power optimization of open-cycle regenerator gas-turbine power-plants. Applied Energy.DOI
480. Lingen Chen, Fengrui Sun, Chih Wu (2004). Maximum-profit performance for generalized irreversible Carnot-engines. Applied Energy.DOI
481. Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal performance of an irreversible dual-cycle. Applied Energy.DOI
482. 王文华，陈林根，孙丰瑞（2003）. 闭式内可逆中冷回热布雷顿循环的功率优化. 《热能动力工程》.
483. 郑彤，陈林根，孙丰瑞（2003）. 线性唯象传热定律下不可逆四热源制冷循环最优性能. 《太阳能学报》.
484. 陈文振，李光华，朱波，孙丰瑞（2003）. 围绕椭圆柱温差驱动的有限长接触熔化. 《太阳能学报》.
485. 余又红，孙丰瑞，张仁兴（2003）. 基于MATLAB的面向对象的燃气轮机动态仿真研究. 《燃气轮机技术》.
486. 余又红，张仁兴，孙丰瑞（2003）. 基于Matlab/Simulink的燃气轮机数控仿真研究. 《海军工程大学学报》.
487. 王文华，陈林根，孙丰瑞（2003）. 摩擦对双压内燃机循环性能的影响. 《内燃机工程》.
488. 李军，陈林根，孙丰瑞（2003）. 线性唯象传热规律下热机内可逆热经济学研究. 《海军工程大学学报》.
489. Fengrui Sun (2003). Investigations on heat transfer and fluid flow over banks of staggered tubes using the finite element method. Energy Research and Information.
490. Fengrui Sun (2003). Thermo-economic optimization of absorption refrigeration cycle with endo-reversible four-heat-reservoir. Journal of Thermal Science and Technology.
491. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2003). RETRACTED: Effect of Heat Leak and Finite Thermal Capacity on the Optimal Configuration of a Two-Heat-Reservoir Heat Engine for Another Linear Heat Transfer Law. Entropy.DOI
492. Lingen Chen, Yuehong Bi, Fengrui Sun, Chih Wu (2003). Performance Optimization of a Combined Heat Pump Cycle. Open Systems & Information Dynamics.DOI
493. Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimal allocation of heat-exchanger area for refrigeration and air-conditioning plants. Applied Energy.DOI
494. Lingen Chen, Xiaoqin Zhu, Fengrui Sun, Chih Wu (2003). Optimal configuration and performance for a generalized Carnot cycle assuming the heat-transfer law Q∝(ΔT). Applied Energy.DOI
495. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). An absorption heat-transformer and its optimal performance. Applied Energy.DOI
496. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2003). Cooling-load density optimization for a regenerated air refrigerator. Applied Energy.DOI
497. Lingen Chen, Wenhua Wang, Fengrui Sun, Chih Wu (2003). Closed intercooled regenerator Brayton-cycle with constant-temperature heat-reservoirs. Applied Energy.DOI
498. X. Zhu, Lei Chen, Fengrui Sun, Chuansong Wu (2003). The ecological optimisation of a generalised irreversible Carnot engine for a generalised heat transfer law. International Journal of Ambient Energy.DOI
499. L. Chen, Tong Zheng, Fengrui Sun, Chuansong Wu (2003). The power and efficiency characteristics for an irreversible Otto cycle. International Journal of Ambient Energy.DOI
500. Lingen Chen, Jianping Zhou, Fengrui Sun, Chih Wu (2003). Ecological optimization for generalized irreversible Carnot engines. Applied Energy.DOI
501. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2003). Theoretical optimization of a regenerated air refrigerator. Journal of Physics D Applied Physics.DOI
502. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimization for a steam turbine stage efficiency using a genetic algorithm. Applied Thermal Engineering.DOI
503. Jun Luo, Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator. Energy Conversion and Management.DOI
504. Tong Zheng, L. Chen, Fengrui Sun, Chuansong Wu (2003). Performance of a four-heat- reservoir absorption refrigerator with heat resistance and heat leak. International Journal of Ambient Energy.DOI
505. L. Chen, Junlin Zheng, Fengrui Sun, Chuansong Wu (2003). Power density analysis and optimisation for an irreversible closed variable-temperature heat reservoir simple Brayton cycle. International Journal of Ambient Energy.DOI
506. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2003). Performance analysis for an irreversible variable temperature heat reservoir closed intercooled regenerated Brayton cycle. Energy Conversion and Management.DOI
507. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). The universal power and efficiency characteristics for irreversible reciprocating heat engine cycles. European Journal of Physics.DOI
508. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2003). Power, power density and efficiency optimization for a closed cycle helium turbine nuclear power plant. Energy Conversion and Management.DOI
509. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2003). Performance optimization of an irreversible four-heat-reservoir absorption refrigerator. Applied Energy.DOI
510. 周圣兵，陈林根，孙丰瑞（2002）. 导热规律服用q∝（ΔT）n广义不可逆卡诺热机的最优性能. 《热能动力工程》.
511. 余又红，孙丰瑞，张仁兴（2002）. 燃气轮机实际简单循环熵产分析. 《海军工程大学学报》.
512. 陈文振，孙丰瑞（2002）. 考虑摩擦时Otto循环功率效率特性新析. 《内燃机学报》.
513. 陈林根，孙丰瑞（2002）. 热力学优化理论的研究进展. 《武汉工程大学学报》.
514. 李大鹏，焦增庚，孙丰瑞（2002）. 横掠不同型式光滑管束流动的热力学分析和比较. 《能源研究与信息》.
515. 李晔，陈林根，孙丰瑞，张仁兴（2002）. 具有压降不可逆性的回热式燃气轮机循环热力学优化. 《燃气轮机技术》.
516. 李大鹏，焦增庚，孙丰瑞（2002）. 波纹板换热器板间流动与传热的有限元计算分析. 《燃气轮机技术》.
517. 郑彤，陈林根，孙丰瑞（2002）. 另一类线性传热时热漏和有限热源对两热源热机最优构型的影响. 《海军工程大学学报》.
518. 刘云生，孙丰瑞，张仁兴，刘永葆（2002）. 燃气轮机的实时仿真及数据预处理. 《海军工程大学学报》.
519. 王文华，陈林根，孙丰瑞（2002）. 摩擦对空气标准Dual循环性能的影响. 《海军工程大学学报》.
520. 郑彤，陈林根，孙丰瑞（2002）. 不可逆Dual循环的功率效率特性. 《内燃机学报》.
521. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2002). Cooling Load Density Optimization of an Irreversible Simple Brayton Refrigerator. Open Systems & Information Dynamics.DOI
522. Lingen Chen, Jianzheng Gong, Fengrui Sun, Chih Wu (2002). Heat transfer effect on the performance of MHD power plant. Energy Conversion and Management.DOI
523. Xiaoqin Zhu, Lingen Chen, Fengrui Sun, Chih Wu (2002). The Optimal Performance of a Carnot Heat Pump under the Condition of Mixed Heat Resistance. Open Systems & Information Dynamics.DOI
524. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2002). Preliminary design optimization of a steam generator. Energy Conversion and Management.DOI
525. Feng Wu, Chih Wu, Lingen Chen, Fengrui Sun (2002). Performance characteristics of a magnetic Stirling cooler This article is a U.S. Government work and is in the public domain in the U.S.A. International Journal of Energy Research.DOI
526. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2002). Optimal Configuration and Performance of Heat Engines with Heat Leak and Finite Heat Capacity. Open Systems & Information Dynamics.DOI
527. Junlin Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2002). Powers and efficiency performance of an endoreversible Braysson cycle. International Journal of Thermal Sciences.DOI
528. Lingen Chen, Jianzheng Gong, Fengrui Sun, Chih Wu (2002). Effect of heat transfer on the performance of thermoelectric generators. International Journal of Thermal Sciences.DOI
529. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2002). The effect of friction on the performance of an air standard dual cycle. Exergy An International Journal.DOI
530. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2002). Power, power density and efficiency optimization of an endoreversible Braysson cycle. Exergy An International Journal.DOI
531. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2002). Performance comparison of an endoreversible closed variable temperature heat reservoir Brayton cycle under maximum power density and maximum power conditions. Energy Conversion and Management.DOI
532. Lingen Chen, Junxing Lin, Jun Luo, Fengrui Sun, Chih Wu (2002). Friction effect on the characteristic performance of Diesel engines. International Journal of Energy Research.DOI
533. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2002). Performance comparison of an irreversible closed Brayton cycle under maximum power density and maximum power conditions. Exergy An International Journal.DOI
534. Lingen Chen, Ye Li, Fengrui Sun, Chih Wu (2002). Optimal performance of an irreversible absorption refrigerator. Exergy An International Journal.DOI
535. Jun Luo, Lingen Chen, Fengrui Sun, Chih Wu (2002). Optimum Allocation of Heat Exchanger Inventory of Irreversible Air Refrigeration Cycles. Physica Scripta.DOI
536. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2002). Cooling load density characteristics of an endoreversible variable-temperature heat reservoir air refrigerator. International Journal of Energy Research.DOI
537. Feng Wu, Chih Wu, Lingen Chen, Fengrui Sun (2002). Performance characteristics of a magnetic Stirling cooler. International Journal of Energy Research.DOI
538. 陈林根，孙丰瑞（2001）. 有限时间热力学研究的一些进展. 《海军工程大学学报》.
539. 罗俊，陈林根，孙丰瑞，倪宁（2001）. 给定轴向分速时轴流压气机级性能的解析优化. 《燃气轮机技术》.
540. 刘云生，孙丰瑞，张仁兴（2001）. 航改型舰用燃气轮机的分析. 《燃气轮机技术》.
541. 蔡琦，陈文振，孙丰瑞（2001）. 热力系统可靠性分析的问题与对策. 《热能动力工程》.
542. 陈文振，蔡琦，孙丰瑞（2001）. 围绕J=1/2,2水平椭圆柱的有限长接触熔化. 《海军工程大学学报》.
543. 陈文振，孙丰瑞（2001）. 考虑摩擦时Diesel循环功率效率特性新析. 《海军工程大学学报》.
544. 陈林根，吴晏，孙丰瑞（2001）. 燃气轮机循环有限时间热力学分析:理论和应用. 《燃气轮机技术》.
545. 管维荣，张仁兴，孙丰瑞（2001）. 分析在设计舰用燃气轮机中间冷却器中的应用. 《海军工程大学学报》.
546. 郑军林，陈林根，孙丰瑞，王厚铿（2001）. 变温热源回热式布雷顿循环的功率密度特性. 《推进技术》.
547. 郑军林，陈林根，孙丰瑞，贾野（2001）. 变温热源内可逆布雷顿循环功率密度优化. 《推进技术》.
548. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2001). Performance of heat-transfer irreversible regenerated Brayton refrigerators. Journal of Physics D Applied Physics.DOI
549. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Optimum distribution of heat exchanger inventory for power density optimization of an endoreversible closed Brayton cycle. Journal of Physics D Applied Physics.DOI
550. Lingen Chen, Chih Wu, Fengrui Sun (2001). Effect of heat transfer law on the finite-time exergoeconomic performance of a Carnot refrigerator. Exergy An International Journal.DOI
551. Junlin Zheng, Fengrui Sun, Lingen Chen, Chih Wu (2001). Exergy analysis for a Braysson cycle. Exergy An International Journal.DOI
552. Xiaoqin Zhu, Lingen Chen, Fengrui Sun, Chih Wu (2001). Optimum Performance of a Generalized Irreversible Carnot Heat Pump with a Generalized Heat Transfer Law. Physica Scripta.DOI
553. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power Density Analysis for a Regenerated Closed Brayton Cycle. Open Systems & Information Dynamics.DOI
554. Lingen Chen, Junling Zheng, Fengrui Sun, Chih Wu (2001). Power Density Optimization for an Irreversible Regenerated Closed Brayton Cycle. Physica Scripta.DOI
555. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power Density Optimization for an Irreversible Closed Brayton Cycle. Open Systems & Information Dynamics.DOI
556. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2001). Cooling Load Density Analysis and Optimization for an Endoreversible Air Refrigerator. Open Systems & Information Dynamics.DOI
557. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power density analysis and optimization of a regenerated closed variable-temperature heat reservoir Brayton cycle. Journal of Physics D Applied Physics.DOI
558. Junlin Zheng, Lei Chen, Fengrui Sun, Chuansong Wu (2001). Power density analysis of an endoreversible closed Brayton cycle. International Journal of Ambient Energy.DOI
559. Feng Wu, Lingen Chen, Chih Wu, Fengrui Sun, Yonghong Zhu (2001). Optimization of irreversible magnetic Stirling cryocoolers. International Journal of Engineering Science.DOI
560. 胡家顺，孙丰瑞，陈林根（2000）. T>T0燃料电池的最小熵产率优化. 《电站系统工程》.
561. 蔡琦，陈文振，孙丰瑞（2000）. 热力设备可靠性分析的问题与对策. 《海军工程大学学报》.
562. 寇蔚，杨立，孙丰瑞（2000）. 燃气轮机实际循环中回热器的“”效率分析. 《燃气轮机技术》.
563. 李大鹏，焦增庚，孙丰瑞（2000）. 波纹形翅片板翅表面的热力学分析和比较. 《燃气轮机技术》.
564. 郑军林，陈林根，孙丰瑞（2000）. 恒温热源条件下内不可逆布雷顿循环的功率密度特性. 《燃气轮机技术》.
565. 李大鹏，焦增庚，孙丰瑞（2000）. 圆管和扁管内部流动的热力学分析. 《热能动力工程》.
566. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu (2000). Finite-time exergoeconomic performance bound for a quantum Stirling engine. International Journal of Engineering Science.DOI
567. 陈林根，倪宁，孙丰瑞（1999）. 具有热阻、热漏和内部耗散的联合制冷机性能. 《海军工程大学学报》.
568. 陈林根，孙丰瑞，倪宁（1999）. 具有热阻、热漏和内不可逆性的联合热机性能. 《热能动力工程》.
569. 李大鹏，焦增庚，孙丰瑞（1999）. 管状表面绝热层设计的热力学优化. 《太阳能学报》.
570. 吴锋，陈林根，孙丰瑞（1999）. 不可逆Otto发动机的热力学优化. 《电站系统工程》.
571. 李大鹏，焦增庚，孙丰瑞（1999）. 管内与管外传热强化的热力学评价. 《电站系统工程》.
572. Lingen Chen, Ning Ni, Chih Wu, Fengrui Sun (1999). Performance analysis of a closed regenerated Brayton heat pump with internal irreversibilities. International Journal of Energy Research.DOI
573. Lingen Chen, Yuehong Bi, Fengrui Sun, Chih Wu (1999). A generalized model of a combined refrigeration cycle and its performance. International Journal of Thermal Sciences.DOI
574. Junxing Lin, Lingen Chen, Chih Wu, Fengrui Sun (1999). Finite-time thermodynamic performance of a Dual cycle. International Journal of Energy Research.DOI
575. Lingen Chen, Chih Wu, Fengrui Sun, Shui Cao (1999). Maximum profit performance of a three-heat-reservoir heat pump. International Journal of Energy Research.DOI
576. Lingen Chen, Ning Ni, Gang Cheng, Fengrui Sun, Chih Wu (1999). Performance analysis for a real closed regenerated Brayton cycle via methods of finite-time thermodynamics. International Journal of Ambient Energy.DOI
577. Ning Ni, Lingen Chen, Chih Wu, Fengrui Sun (1999). Performance analysis for endoreversible closed regenerated Brayton heat pump cycles. Energy Conversion and Management.DOI
578. Lingen Chen, Fengrui Sun, Chih Wu (1999). Effect of heat transfer law on the performance of a generalized irreversible Carnot engine. Journal of Physics D Applied Physics.DOI
579. Feng Wu, Lingen Chen, Chih Wu, Fengrui Sun, Qing Li (1999). Optimum performance of an irreversible Stirling cryocooler. International Journal of Ambient Energy.DOI
580. 陈林根，孙丰瑞，ＷｕＣｈｉｈ（1998）. 有限时间热力学理论和应用的发展现状. 《物理学进展》.
581. 陈林根，倪宁，孙丰瑞（1998）. 恒温热源实际闭式燃气轮机回热循环性能的有限时间热力学分析. 《发电设备》.
582. 陈林根，孙丰瑞，郑军林（1998）. 质漏对联合循环化学发动机性能的影响. 《海军工程大学学报》.
583. 李大鹏，孙丰瑞（1998）. 横掠不同形状单管的熵产分析及热力学性能比较. 《电站系统工程》.
584. 吴锋，孙丰瑞，陈林根（1998）. 太阳能-风能转换的内可逆双热机模型. 《太阳能学报》.
585. 吴锋，朱永红，陈林根，孙丰瑞（1998）. 不可逆涡喷发动机的热力学优化. 《汕头大学学报(自然科学版)》.
586. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu, Peiqun Hua (1998). Optimum performance parameters for a quantum Carnot heat pump with spin-1/2. Energy Conversion and Management.DOI
587. Lingen Chen, Fengrui Sun, Chih Wu (1998). Performance of chemical engines with a mass leak. Journal of Physics D Applied Physics.DOI
588. Feng Wu, Lingen Chen, Chih Wu, Fengrui Sun (1998). Optimum performance of irreversible stirling engine with imperfect regeneration. Energy Conversion and Management.DOI
589. Feng Wu, Lei Chen, Fengrui Sun, Chuansong Wu, Yonghong Zhu (1998). Performance and optimization criteria for forward and reverse quantum Stirling cycles. Energy Conversion and Management.DOI
590. Lingen Chen, Fengrui Sun, Ning Ni, Chih Wu (1998). Optimal configuration of a class of two-heat-reservoir refrigeration cycles. Energy Conversion and Management.DOI
591. Lingen Chen, Chih Wu, Fengrui Sun, Shui Cao (1998). Heat transfer effects on the net work output and efficiency characteristics for an air-standard Otto cycle. Energy Conversion and Management.DOI
592. Chih Wu, Lingen Chen, Fengrui Sun (1998). Effect ZOF heat transfer law on finite-time exergoeconomic performance of carnot heat pump. Energy Conversion and Management.DOI
593. Chih Wu, Lingen Chen, Fengrui Sun (1998). Optimization of steady flow heat pumps. Energy Conversion and Management.DOI
594. Lingen Chen, Junxing Lin, Fengrui Sun, Chih Wu (1998). Efficiency of an Atkinson engine at maximum power density. Energy Conversion and Management.DOI
595. Lingen Chen, Fengrui Sun, Chih Wu (1998). Optimal expansion of a heated working fluid with phenomenological heat transfer. Energy Conversion and Management.DOI
596. Lingen Chen, Chih Wu, Fengrui Sun (1998). Cooling load versus COP characteristics for an irreversible air refrigeration cycle. Energy Conversion and Management.DOI
597. Lingen Chen, Chih Wu, Fengrui Sun (1998). Influence of internal heat leak on the performance of refrigerators. Energy Conversion and Management.DOI
598. Lingen Chen, Chih Wu, Fengrui Sun (1998). Optimization of specific rate of heat pumping in combined heat pump cycles. Energy Conversion and Management.DOI
599. Chih Wu, Lingen Chen, Fengrui Sun, Shui Cao (1998). Optimal collector temperature for solar-driven heat pumps. Energy Conversion and Management.DOI
600. 陈林根，林俊兴，孙丰瑞（1997）. 最大功率密度输出时 Atkinson 热机的效率. 《内燃机学报》.
601. 李大鹏，孙丰瑞（1997）. 几种流动型式换热器与逆流式换热器的热力学性能比较. 《电站系统工程》.
602. 吴锋，孙丰瑞，陈林根（1997）. 谐振子系统量子卡诺热泵的最佳特性参数. 《热能动力工程》.
603. 孙丰瑞，陈林根，薛蒙，郁军，刘九七（1997）. 舰艇蒸汽压缩空调装置最小传热面积优化. 《船舶工程》.
604. 陈林根，曹水，孙丰瑞（1997）. 回热式空气制冷循环的有限时间热力学分析. 《制冷》.
605. 陈林根，倪宁，孙丰瑞（1997）. 热阻和内不可逆性对实际闭式燃气轮机回热循环性能的影响(续). 《电站系统工程》.
606. 陈林根，倪宁，孙丰瑞（1997）. 布雷顿和卡诺热机循环性能比较(Ⅰ)定常态流恒温热源循环. 《推进技术》.
607. 牛克华，陈林根，倪宁，孙丰瑞（1997）. 具有等熵压缩、膨胀过程的回热式布雷顿热泵循环有限时间热力学性能. 《海军工程大学学报》.
608. 吴锋，孙丰瑞，陈林根，华佩群（1997）. 经典极限下量子卡诺制冷机有限时间热力学性能界限和优化准则. 《低温与特气》.
609. 陈林根，倪宁，孙丰瑞（1997）. 热阻和内不可逆性对空气热泵循环性能的影响. 《太阳能学报》.
610. 吴锋，孙丰瑞，陈林根（1997）. 燃料电池发电厂火用经济最佳效率、功率和运行温度. 《电站系统工程》.
611. 朱克华，陈林根，孙丰瑞（1997）. 空气标准奥托循环的有限时间热力学分析. 《电站系统工程》.
612. 陈林根，孙丰瑞（1997）. 闭式燃气轮机回热循环功率和效率新公式. 《燃气涡轮试验与研究》.
613. 吴锋，孙丰瑞，陈林根，朱永红（1997）. 正反向量子斯特林循环有限时间热力学性能界限和优化准则. 《海军工程大学学报》.
614. Lingen Chen, Fengrui Sun, Chih Wu, Jun Yu (1997). Performance characteristic of isothermal chemical engines. Energy Conversion and Management.DOI
615. Lingen Chen, Fengrui Sun, Chih Wu (1997). Exergeo-economic performance bound and optimisation criteria for heat engines. International Journal of Ambient Energy.DOI
616. Chih Wu, Lingen Chen, Fengrui Sun (1997). Finite-Time Thermodynamic Performance for a Class of Irreversible Heat Pumps. ASME Turbo Asia Conference.DOI
617. Fengrui Sun, Wenzhen Chen, Lingen Chen, Chih Wu (1997). Optimal performance of an endoreversible Carnot heat pump. Energy Conversion and Management.DOI
618. Lingen Chen, Fengrui Sun, Chih Wu (1997). Influence of internal heat leak on the power versus efficiency characteristics of heat engines. Energy Conversion and Management.DOI
619. Lingen Chen, Chih Wu, Fengrui Sun (1997). Heat pump performance with internal heat leak. International Journal of Ambient Energy.DOI
620. Lingen Chen, Fengrui Sun, Chih Wu, Jianzheng Gong (1997). Maximum power of a•combined-cycle isothermal chemical engine. Applied Thermal Engineering.DOI
621. Lingen Chen, Chih Wu, Fengrui Sun (1997). Steady flow combined refrigeration cycle performance with heat leak. Applied Thermal Engineering.DOI
622. Lingen Chen, Fengrui Sun, Chih Wu, Robert L. Kiang (1997). Theoretical analysis of the performance of a regenerative closed Brayton cycle with internal irreversibilities. Energy Conversion and Management.DOI
623. Lingen Chen, Chih Wu, Fengrui Sun (1997). Optimal coefficient of performance and heating load relationship of a three-heat-reservoir endoreversible heat pump. Energy Conversion and Management.DOI
624. Lingen Chen, Fengrui Sun, Chih Wu, Robert L. Kiang (1997). A generalized model of a real refrigerator and its performance. Applied Thermal Engineering.DOI
625. Lingen Chen, Fengrui Sun, Chih Wu (1997). Influence of heat transfer law on the performance of a Carnot engine. Applied Thermal Engineering.DOI
626. Chih Wu, Lingen Chen, Fengrui Sun (1997). Optimization of solar absorption refrigerator. Applied Thermal Engineering.DOI
627. Lingen Chen, Chih Wu, Fengrui Sun (1997). Heat transfer effect on the specific heating load of heat pumps. Applied Thermal Engineering.DOI
628. 孙丰瑞，郭立峰，王子义，陈林根，陈文振（1996）. 核动力蒸汽装置性能分析和优化的三种有限时间热力学方法. 《核动力工程》.
629. 李大鹏，孙丰瑞，王少明（1996）. 冷凝器系统的分析及新的性能评价系数. 《太阳能学报》.
630. 金晓昌，吴锋，孙丰瑞，陈林根（1996）. E目标下量子卡诺热机有限时间热力学性能界限. 《电站系统工程》.
631. 林俊兴，陈林根，孙丰瑞（1996）. 传热对空气标准内燃机循环性能的影响. 《电站系统工程》.
632. Lingen Chen, Fanming Zeng, Fengrui Sun, Chih Wu (1996). Heat-transfer effects on net work and/or power as functions of efficiency for air-standard diesel cycles. Energy.DOI
633. Lingen Chen, Chih Wu, Fengrui Sun (1996). Heat transfer effect on the specific cooling load of refrigerators. Applied Thermal Engineering.DOI
634. Chih Wu, Lingen Chen, Fengrui Sun (1996). Effect of the heat transfer law on the finite-time, exergoeconomic performance of heat engines. Energy.DOI
635. Chih Wu, Lingen Chen, Fengrui Sun (1996). Performance analysis of solar three-heat-reservoir cooling systems. Energy Conversion and Management.DOI
636. Chih Wu, Lingen Chen, Fengrui Sun (1996). Optimisation of steady flow refrigeration cycles. International Journal of Ambient Energy.DOI
637. Chih Wu, Lingen Chen, Fengrui Sun, Wenzhen Chen (1996). General performance characteristics of a finite-speed Carnot refrigerator. Applied Thermal Engineering.DOI
638. Lingen Chen, Fengrui Sun, Chih Wu (1996). Optimum collector temperature for solar heat engines. International Journal of Ambient Energy.DOI
639. Chih Wu, Lingen Chen, Fengrui Sun (1996). Performance of a regenerative Brayton heat engine. Energy.DOI
640. 陈林根，孙丰瑞，彭义恒（1995）. 高效亚音轴流压气机级几何参数最佳选择. 《航空动力学报》.
641. 陈林根，孙丰瑞（1995）. 回热对闭式燃气轮机循环性能的影响. 《船舶工程》.
642. Lingen Chen, Fengrui Sun, Wenzhen Chen (1995). Optimization of the specific rate of refrigeration in combined refrigeration cycles. Energy.DOI
643. 陈文振，孙丰瑞，周猛，陈林根，陈少棠（1994）. 混合热阻条件下不可逆卡诺热机的优化性能. 《兵工学报》.
644. 孙丰瑞，陈文振，陈林根，赖锡棉（1993）. 热电发电机优化的有限时间热力学准则. 《工程热物理学报》.
645. 陈林根，孙丰瑞，陈文振（1993）. 论定常态流热机的比功率优化. 《燃气轮机技术》.
646. 陈林根，陈少堂，孙丰瑞，陈文振（1993）. 一类与传热定律无关的内可逆热机最优构型. 《燃气轮机技术》.
647. 陈林根，孙丰瑞，陈文振（1993）. 热漏对热机功率效率特性的影响. 《海军工程大学学报》.
648. 陈林根，孙丰瑞，陈文振（1993）. 化学反应驱动热机的功率优化. 《海军工程大学学报》.
649. 孙丰瑞，陈林根，陈文振（1993）. 内可逆卡诺热泵的生态学优化性能. 《海军工程大学学报》.
650. 陈林根，孙丰瑞，陈文振（1993）. 定常态变温热源制冷机的有限时间热力学优化. 《低温与超导》.
651. 陈林根，孙丰瑞，陈文振（1993）. 关于CA效率、不可逆热机和有限时间热力学发展. 《热能动力工程》.
652. 陈林根，孙丰瑞，陈文振（1993）. 闭式燃气轮机的最大功率输出. 《船舶工程》.
653. 曹水，陈林根，孙丰瑞，陈文振（1992）. 线性唯象定律系统太阳能热机和吸收式太阳能热泵的优化. 《太阳能学报》.
654. 陈林根，孙丰瑞，陈文振（1992）. 能量系统有限时间热力学的现状和展望. 《力学进展》.
655. 陈林根，孙丰瑞，陈文振，唐开元，陈少棠（1992）. 热力循环的有限时间(火用)经济品质因素. 《热能动力工程》.
656. 陈林根，孙丰瑞，陈文振（1992）. 朗肯循环装置的有限时间热力学优化. 《汽轮机技术》.
657. 陈文振，孙丰瑞，陈林根（1992）. 过程速率有限对卡诺制冷机制冷系数与利润率间关系的影响. 《海军工程大学学报》.
658. 陈林根，孙丰瑞，陈文振（1991）. 卡诺热机的最佳利润与效率间的关系. 《热能动力工程》.
659. 陈林根，孙丰瑞，陈文振（1991）. 太阳能动力装置集热器最佳工作温度. 《太阳能学报》.
660. 孙丰瑞，陈林根，陈文振（1991）. 二热源机的全息热效率与利润率谱. 《内燃机学报》.
661. 陈林根，孙丰瑞，唐开元，陈文振，陈少棠（1991）. 传热规律对卡诺热泵有限时间(火用)经济最优性能的影响. 《海军工程大学学报》.
662. 陈林根，孙丰瑞，陈文振（1991）. q∝△(T-1)传热时三热源热泵的最优性能普遍关系. 《海军工程大学学报》.
663. 孙丰瑞，陈文振，陈林根（1991）. Q∝Tn时不可逆卡诺热泵的最优性能. 《海军工程大学学报》.
664. 陈林根，孙丰瑞，陈文振（1991）. 太阳能热机的有限时间热力学优化准则. 《热能动力工程》.
665. 陈林根，孙丰瑞，陈文振（1990）. 非线性传热情况下内可逆三热源热泵的最佳供热系数与供热率间的关系. 《太阳能学报》.
666. 陈林根，孙丰瑞，陈文振（1990）. q（T,Tw）=α（1/Tw-1/T）传热情况下卡诺热泵的最佳供热系数与供热率间的关系. 《热能动力工程》.
667. 陈文振，孙丰瑞，陈林根（1990）. 关于有限时间热力学的最小熵产生最大值原则. 《海军工程大学学报》.
668. 孙丰瑞，陈文振，陈林根（1990）. 二源间反向内可逆卡诺循环全谱分析及最佳参数的选择. 《海军工程大学学报》.
669. 孙丰瑞，陈林根，陈文振（1989）. 热源间定常态能量转换热机有限时间热力学分析和评估. 《热能动力工程》.
670. 陈林根，孙丰瑞，陈文振（1989）. 热机有限时间热力学:理论和应用. 《热能动力工程》.
671. 孙丰瑞，赖锡棉（1988）. 热源间热机的“全息”热效率—功率谱. 《热能动力工程》.

书籍章节

1. Shaojun Xia, Lingen Chen, Fengrui Sun (2010). Entransy dissipation minimization for liquid-solid phase change processes. Science China Technological Sciences.DOI