许晓静

期刊论文

1. Zian Li, Yu Li, Deli Kong, Xiaojing Xu (2026). Effect of Zr Microalloying on the Proprieties of Highly-Alloyed Al-10.68Zn-3Mg-1.06Cu Alloy. Journal of materials engineering and performance (Print).DOI
2. Qingshan Zhou, Deli Kong, Xiaojing Xu (2026). Stepwise stabilization of low-melting constituents enables grain refinement and overburning suppression in highly alloyed Al–Zn–Mg–Cu alloys. Canadian Metallurgical Quarterly.DOI
3. Qingshan Zhou, Deli Kong, Xiaojing Xu (2026). Synergistic regulation of Mg(Zn,Cu)2 phases and Al3(Sc,Zr) dispersoids for enhancing mechanical properties of high-alloyed Al-Zn-Mg-Cu-Zr-Ti-Sc alloy. Materials Science and Engineering A.DOI
4. Deli Kong, Xiaojing Xu, Siyuan Yin (2026). Overcoming the limitations of conventional solution treatment: synergistic property enhancement of high-alloyed Al-Zn-Mg-Cu alloys via Low-Temperature Pre-Treatment. Vacuum.DOI
5. Tian Han, Xiaojing Xu, Qing Wang (2026). The influence of SiCp content on the bimodal grain structure in aluminum matrix composites and its effect on properties. Vacuum.DOI
6. Yunjie Liu, Yu Li, Deli Kong, Xiaojing Xu (2026). Effect of Heat Treatment on the Microstructure and Overall Performance of 7xxx Series Aluminum Alloy Welding Wire-Deposited Components. Journal of Materials Engineering and Performance.DOI
7. Qingshan Zhou, Deli Kong, Xiaojing Xu, Siyuan Yin (2026). Synergistic effects of Sc and Er co‑addition on microstructure evolution and mechanical properties of a high-alloyed Al–Zn–Mg–Cu-Zr-Ti alloy. Journal of Alloys and Compounds.DOI
8. Xizhou Kai, Jun Zhu, Yuhui Wang, Yanjie Peng, Anjun Shi, Ran Tao, Gang Chen, Xiaojing Xu, Yutao Zhao (2026). Electromagnetic-ultrasonic assisted fabrication of (ZrB2 + B4C)/6061Al composites: A route to homogeneous microstructure and enhanced mechanical properties. Materials Characterization.DOI
9. Deli Kong, Xiaojing Xu, Can Li, Qingshan Zhou (2026). Effect of Deep Cryogenic Treatment Time on the Microstructure, Mechanical Properties, and Corrosion Resistance of High-Alloyed Al–Zn–Mg–Cu Alloys. Protection of Metals and Physical Chemistry of Surfaces.DOI
10. Tian Han, Xiaojing Xu, Ling Huang (2026). Tailoring precipitates and grain boundary phases via aging: Enhancing plasticity and corrosion resistance of powder-metallurgy SiCp/Al-Zn-Mg composites. Vacuum.DOI
11. Tian Han, Xiaojing Xu (2026). Effect of bimodal grain structure and heterogeneous SiC p distribution on friction properties of ultrahigh-strength aluminum matrix composites. Canadian Metallurgical Quarterly.DOI
12. Yu Li, Can Li, Deli Kong, Xiaojing Xu (2026). Novel Solution Treatments for Microstructure and Property Regulation of Ultra-High-Strength Highly Alloyed Al-Zn-Mg-Cu-Zr-Sc Aluminum Alloys. Journal of Materials Engineering and Performance.DOI
13. 孙智伟，周青山，许晓静，刘乐乐（2025）. Mg含量对Al-6.5Si-5.5Cu-xMg-0.2Zr-0.01Sr-0.06Ti-0.2Ce合金微观组织和力学性能的影响. 《热加工工艺》.
14. 李晨，罗耘天，周青山，韩梦楠，沙少辉，许晓静（2025）. Ce元素含量对高合金化Al-Zn-Mg-Cu-Zr-Ti合金显微组织和耐腐蚀性的影响（英文）. Transactions of Nonferrous Metals Society of China.
15. C. Ai, Kaiwen Li, Xiaojing Xu, Y. Ru, Heng Zhang, Shu-Suo Li, S. Gong, Hanwei Jiang, Min Guo, Taiwen Huang, Lin Liu (2025). Effects of substituting Mo for W and temperature on γ/γ′ lattice misfits of second generation Ni based single crystal superalloys. Intermetallics (Barking).DOI
16. Qing Xu, S. Qu, Xiaojing Xu, Cheng-Long Zhao, C. Ai, Y. Ru, Heng Zhang, Shu-Suo Li, S. Gong, Min Guo, Taiwen Huang, Lin Liu (2025). Effects of Ta addition on microstructure, compression and wear properties of CoCrNiTa medium entropy alloys. Intermetallics (Barking).DOI
17. Qingshan Zhou, Deli Kong, Xiaojing Xu, Siyuan Yin (2025). Effect of rare-earth (Er-La) composite addition on the microstructure and properties of a highly alloyed Al-Zn-Mg-Cu-Zr-Ti aluminum alloy. Vacuum.DOI
18. Qingshan Zhou, Deli Kong, Tao Wei, Xiaojing Xu (2025). Effect of 0.15 wt.% La addition on the microstructure and properties of high alloyed Al–Zn–Mg–Cu–Zr alloys. Canadian Metallurgical Quarterly.DOI
19. Tian Han, Xiaojing Xu, Shuaidi Li (2025). Enhancement of Mechanical Properties and Corrosion Resistance in SiCw Reinforced Al–Zn–Mg–Cu Composites via Controlled Aging Treatments. Protection of Metals and Physical Chemistry of Surfaces.DOI
20. Tian Han, Xiaojing Xu, Qingshan Zhou, Can Li, Guocheng Xu, Yongzhong Fu (2025). Stir-casting manufactured SiCp reinforced aluminum matrix composite with ultrahigh strength and excellent corrosion resistance: Matrix, microstructure and properties. Journal of Materials Research and Technology.DOI
21. Chen Li, Yuntian Luo, Qingshan Zhou, Mengnan Han, Shaohui Sha, Xiaojing Xu (2025). Effect of Ce element content on microstructure and corrosion resistance of highly-alloyed Al−Zn−Mg−Cu−Zr−Ti alloy. Transactions of Nonferrous Metals Society of China.DOI
22. Jianming Wu, Xiaojing Xu, Xu Zhang, Yuntian Luo, Shuaidi Li, Lin Huang (2024). Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiCp Hybrid Reinforced 6061 Aluminum Matrix Composites. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
23. 怯喜周，单颖，彭艳杰，王宇慧，陈刚，许晓静（2024）. 氮化硼颗粒增强铝基复合材料研究进展. 《铸造技术》.
24. 张帅，许晓静，张超（2024）. 压缩预载纤维金属层板高速冲击损伤分析. 《材料科学与工程学报》.
25. 韩爱民，赵启亮，许晓静，李灿，周玉华，韩天（2024）. 增强体对Fe-C-Cu系粉末冶金组织及摩擦性能的影响. 《粉末冶金工业》.
26. 刘乐乐，孙智伟，许晓静，洪志恒（2024）. 稀土La、Ce和Y对Al-6.5Si-5.5Cu-0.2Zr-0.01Sr-0.06Ti-0.2RE合金组织和力学性能的影响. 《热加工工艺》.
27. Qingshan Zhou, Xiaojing Xu, Can Li, Tian Han (2024). Improving the mechanical properties and corrosion resistance of a highly alloyed Al–Zn–Mg–Cu alloy through pre-treatment at 350°C prior to multi-stage solution treatment. Journal of Materials Research and Technology.DOI
28. Qingshan Zhou, Tian Han, Siyuan Yin, Cheng Tan, Xiaojing Xu (2024). Effect of Heating Rates and Solid Solution Time on Microstructure and Properties of Hot-Pressed 7085 Aluminum Alloy. Protection of Metals and Physical Chemistry of Surfaces.DOI
29. Qingshan Zhou, Xiaojing Xu, Siyuan Yin, Tian Han (2024). A novel strategy to enhance the mechanical properties and corrosion resistance of ultra-high strength Al-Zn-Mg-Cu alloy: Pre-recovery Multi-Stage Solution Treatment (P-MST). Materials Science and Engineering A.DOI
30. Tao Wei, Xiaojing Xu, Bin Zhang, Guoning Bao, Lele Liu, Shuaidi Li, Jianming Wu (2024). Effect of T6 and T6I4 Aging Treatments on Microstructure and Compressive Properties of Aluminum Metal Matrix Composites Reinforced by SiCw Via Squeeze Casting. Metal Science and Heat Treatment.DOI
31. Tao Wei, Xiaojing Xu, Bin Zhang, Guoning Bao, Lele Liu, Shuaidi Li, Jianming Wu (2024). The effect of T6 and T6I4 aging treatment on microstructure and compressive properties of Aluminum metal matrix composites reinforced by SiCw via squeeze casting. Металловедение и термическая обработка металлов.DOI
32. Can Li, Xiaojing Xu, Xin Yan (2024). Effect of B4Cp Volume Fraction on Microstructure and Properties of B4Cp/SiCp Hybrid Reinforced 2000 Series Aluminum Matrix Composites. Protection of Metals and Physical Chemistry of Surfaces.DOI
33. Qin Wang, Qingshan Zhou, Lele Liu, Xiaojing Xu (2024). Effect of Aging Treatment Temperature on Microstructure and Properties of Al-9.3Si-0.41Mg-0.2Zr-0.01Sr-0.08Ti-0.2Ce Cast Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
34. Vitus Mwinteribo Tabie, Jamal-Deen Kukurah, Jianwei Li, Anthony Akayeti, James Kwasi Quaisie, Xiaojing Xu (2024). Microstructure and properties of in situ TiC-reinforced Ti750 composite prepared by SPS. World Journal of Engineering.DOI
35. Guocheng Xu, Yuntian Luo, Qingshan Zhou, Guoning Bao, Xiaojing Xu (2024). Effect of pre-recovery solid solution treatment on microstructure and comprehensive properties of Al-11.0Zn-3.0Mg-1.0Cu-0.2Zr-0.16Ti-0.15Er-0.15La alloy. Canadian Metallurgical Quarterly.DOI
36. Hui Yao, Xiaojing Xu, Yuntian Luo, Tian Han, Qingshan Zhou (2024). Microstructure and properties of a HIP manufactured SiCp reinforced high alloyed Al–Zn–Mg–Cu–Zr–Ti aluminum matrix composite. Journal of Materials Research and Technology.DOI
37. Can Li, Xiaojing Xu, Qingshan Zhou, Zhiwei Sun (2024). Effect of Multistage Solid Solution Treatment on Microstructure and Properties of Al-6.5Si-5.5Cu-0.2Zr-0.01Sr-0.06Ti-0.2Y Alloy. Journal of Materials Engineering and Performance.DOI
38. Hui Yao, Xiaojing Xu, Rikai Zhang, Peng Zhang, Zhiwei Sun, Hao Wang (2023). Effect of Ti and Ce Microalloy on Microstructure and Properties of Al-Si-Cu-Zr-Sr Cast Aluminum Alloy. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
39. Hui Yao, Xiaojing Xu, Chengbin Cai, Chen Li, Fenghua Chen, Yangguang Liu, Yishui Xiao (2023). Comparative Assessment on Microstructure and Properties of in-situ TiC + Ti5Si3 Reinforced Ti-Al-Sn-Zr Matrix Composites by Spark Plasma Sintering and Argon Protected Sintering. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
40. Fenghua Chen, Xiaojing Xu, Yangguang Liu, Chaoxing Hu, Bin Cao, Xiang Bai (2023). Effect of Solution-ECAP-Aging Treatment on the Microstructure and Properties of TB8 Titanium Alloy. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
41. Guoning Bao, Xiaojing Xu, Yinqun Hua, Bin Zhang, Tao Wei, Zhiheng Hong, Lele Liu, Mengnan Han, Shaohui Sha (2023). Microstructure and Mechanical Properties of Al-11.3Zn-3.2Mg-1.3Cu-0.2Zr-0.1Sr-xTi Extruded Aluminum Alloy with Different Aging Process. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
42. Shuaidi Li, Xiaojing Xu, Xiang Bai, Bin Cao (2023). Hot Corrosion Resistance of TB8 Titanium Alloy after ECAP and Heat Treatment. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
43. 怯喜周，王宇慧，彭艳杰，杨子易，陈刚，许晓静（2023）. 原位纳米ZrB2颗粒增强7085铝合金的微观组织与力学性能研究. 《铸造技术》.DOI
44. 位佳，金啸鹏，许晓静（2023）. 固溶制度对Al-5.6Cu-1.7Mg-0.2Zr-0.1Sr-0.6Ti合金挤压材组织性能的影响. 《山东科学》.
45. 樊曙天，范一凡，许晓静，王佳琪（2023）. 钛合金Ti750切削力和刀具磨损试验. 《江苏大学学报(自然科学版)》.
46. Xin Yan, Xiaojing Xu, Qingjun Liu, Shuaidi Li, Jicun Ren (2023). Effect of Solution Treatment on Microstructure and Properties of Hybrid Reinforced 2124 Aluminum Matrix Composites by B4Cp/SiCp. Protection of Metals and Physical Chemistry of Surfaces.DOI
47. Jianwei Li, Siyuan Yin, Qingshan Zhou, Tian Han, Xiaojing Xu (2023). Microstructure and properties of Al-11.0Zn-3.1 Mg-1.22Cu-0.1Sr-0.2Zr-0.1Ti-0.45Ce with strength over 800 MPa under interrupted aging. Journal of materials research/Pratt's guide to venture capital sources.DOI
48. Siyuan Yin, Qingshan Zhou, Yishui Xiao, Lin Huang, Xiaojing Xu (2023). Influence of Equal Channel Angular Extrusion and Heat Treatment on High Temperature Oxidation Resistance of Ti555 Alloy. Protection of Metals and Physical Chemistry of Surfaces.DOI
49. Vitus Mwinteribo Tabie, James Kwasi Quaisie, Jianwei Li, Philip Yamba, Xiaojing Xu (2023). THE INFLUENCE OF CERAMIC PARTICLES ON THE CORROSION PROPERTIES OF NOVEL TI750 MATRIX ALLOY. European Journal of Materials Science and Engineering.DOI
50. Jinpeng Ye, Siyuan Yin, Xiaojing Xu (2023). Effects of Different Zn/Mg Ratio and Ti Content on Hot Extruded 7xxx series Aluminum Alloy. Protection of Metals and Physical Chemistry of Surfaces.DOI
51. Chen Li, Hongbo Wei, Xiaojing Xu, Qingshan Zhou, Mengnan Han, Shaohui Sha (2023). Microstructure and Mechanical Properties of a Highly Alloyed Al–Zn–Mg–Cu–Zr Alloy Under T6I4 and T6R6I4 Agings. Metals and Materials International.DOI
52. Jicun Ren, Zhiheng Hong, Qingshan Zhou, Xiaojing Xu, Siyuan Yin (2023). Effect of Aging Treatment Temperature on Microstructure and Properties of Al-Si-Mg Cast Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
53. Xin Yan, Xiaojing Xu, Qingshan Zhou, Zhiwei Sun (2023). Effect of Solid Solution System on the Properties of Al-6.5Si-5.5Cu-0.2Zr-0.01Sr-0.06Ti-0.2Ce Alloy in the Aging State. Journal of Materials Engineering and Performance.DOI
54. Chen Li, Qingshan Zhou, Mengnan Han, Shaohui Sha, Yuntian Luo, Xiaojing Xu (2023). Effect of rare earth element Er on the microstructure and properties of highly alloyed Al-Zn-Mg-Cu-Zr-Ti alloy. Journal of Alloys and Compounds.DOI
55. Xiaojing Xu, Tian Han, Qingshan Zhou, Tao Wei, Guoning Bao, Hui Yao, Mengnan Han, Shaohui Sha (2023). Effect of Ce and Y on Microstructures and Properties of Al-11.0Zn-3.1Mg-1.22Cu-0.1Sr-0.2Zr-0.1Ti Alloy. Journal of Materials Engineering and Performance.DOI
56. Jinming Ru, Guoqing Gao, Jun Hua Cheng, Jianwei Li, Yuhua Zhou, Xiaojing Xu, Jucai Du (2023). Influence of Graphene Contents on Microstructure and High Temperature Oxidation Behavior of GNPs/Ti β21S Composites. High Temperature Corrosion of Materials.DOI
57. Xiaojing Xu, Tian Han, Qingshan Zhou, Siyuan Yin, Chen Li, Mengnan Han (2023). Effect of T6I4 with different aging time on microstructure and properties of high strength aluminum alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
58. Chaoxing Hu, Jie Zhang, Shuaidi Li, Tao Wei, Guoning Bao, Mengru Jia, Qingshan Zhou, Xiaojing Xu (2023). Effect of plastic deformation treatment on microstructure and comprehensive properties of SiC w reinforced 2000 series aluminium matrix composites. Canadian Metallurgical Quarterly.DOI
59. 陈汉辉，陈瑞芳，许晓静，王天伦，张劲松，张可人，黄鹏，范佳丽（2022）. Mn含量对6000系铝合金组织和性能的影响. 《热加工工艺》.
60. Jianwei Li, Ren Peng, Jinming Ru, Jianhua Wu, Kaixiang Zhou, Yongxin Yan, Xiaojing Xu, Yuhua Zhou (2022). Effects of Chromium Carbide Coatings on Microstructure and Thermal Conductivity of Mg/Diamond Composites Prepared by Squeeze Casting. Materials.DOI
61. Xiang Bai, Xiaojing Xu, Yangguang Liu, Bin Cao, Chaoxing Hu, Fenghua Chen (2022). High Temperature Oxidation Resistance of TB8 Titanium Alloy after Equal Channel Angular Pressing and Heat Treatment. Journal of Materials Engineering and Performance.DOI
62. Yuntian Luo, Yuan Zhuang, Chen Li, Xiaojing Xu (2022). Effects of Cu and Ti Contents on Microstructure and Properties of Al-8.8Zn-2.2Mg-xCu-0.2Zr-0.1Sr-yTi Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
63. Vitus Mwinteribo Tabie, James Kwasi Quaisie, Jianwei Li, Philip Yamba, Xiaojing Xu (2022). Microstructure and mechanical properties of particle reinforced high-temperature titanium composites. The European Physical Journal Applied Physics.DOI
64. Tao Wei, Ruifang Chen, Xiaojing Xu, Hongbo Wei, Guoning Bao, Lele Liu (2022). Effect of Interrupted Aging–Retrogression Re-Aging Treatment on the Microstructure and Properties of Al-Zn-Mg-Cu Alloy. Journal of Materials Engineering and Performance.DOI
65. Zhiheng Hong, Hao Wang, Xiaojing Xu, Lele Liu (2022). Effect of Mg Content on the Microstructure and Comprehensive Properties of Al-5Si-5.3Cu-0.3Sr-0.2Zr-0.2Y-0.06Ti-xMg Alloy. Journal of Materials Engineering and Performance.DOI
66. Qingshan Zhou, Chen Li, Tianlun Wang, Xiaojing Xu, Yuntian Luo (2022). Effect of various multi-stage solution treatments on the microstructure and properties of cold-extruded Al–9.74Zn–2.59 Mg–0.94Cu–0.2Zr–0.83Ti alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
67. Lin Huang, Xiaojing Xu, Yishui Xiao, Shuaidi Li, Yuntian Luo, Jianming Wu (2022). High-Temperature Corrosion Resistance of Ti-555 Titanium Alloy after Equal Channel Angular Pressing and Heat Treatment. Journal of Materials Engineering and Performance.DOI
68. Vitus Mwinteribo Tabie, Xiaojing Xu, Majeed Koranteng Osman, Jianwei Li (2022). Oxidation performance of particle-reinforced Ti750 matrix composites. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications.DOI
69. Yuntian Luo, Tianci Zhang, Chen Li, Shuaidi Li, Jianming Wu, Lin Huang, Xiaojing Xu (2022). Effect of re−sintering temperature on compact microstructure and compressive properties of SiC and Ti reinforced aluminum matrix composites by powder metallurgy. Canadian Metallurgical Quarterly.DOI
70. Yuntian Luo, Yuan Zhuang, Chen Li, Shuaidi Li, Guoning Bao, Tao Wei, Shaohui Sha, Xiaojing Xu (2022). Microstructure and Properties of T6I4 Aged 700-MPa-Grade Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
71. 王月美，阮鸿雁，许晓静，汝金明（2021）. Cu含量对Ti-8Si系合金抗腐蚀性能的影响. 《热加工工艺》.
72. 张可人，许晓静，张洁（2021）. 多级固溶时效对7×××系超高强冷挤压铝合金组织性能的影响. 《金属热处理》.DOI
73. Shutian Fan, Jiaqi Wang, Xiaojing Xu, Yifan Fan, Xiaokang Wang (2021). Experimental study on machining properties of a high-strength composite material with Ti-555 titanium alloy matrix. Ferroelectrics.DOI
74. Xizhou Kai, Lin Hai Wu, Yanjie Peng, Zhanqiu Tan, Guirong Li, Gang Chen, Xiaojing Xu, Zhiqiang Li, Yutao Zhao (2021). Effects of Zr element on the microstructure and mechanical properties of B4C/Al composites fabricated by melt stirring method. Composites Part B Engineering.DOI
75. Xiaojing Xu, Jialong Du, Kaiyu Luo, Mingxin Peng, Fei Xing, Lulu Wu, Jian Lü (2021). Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing. Surface and Coatings Technology.DOI
76. Jianwei Li, Ren Peng, Kaixiang Zhou, Jindong Huang, Jinming Ru, Yuhua Zhou, Xiaojing Xu (2021). Effects of heat treatment and carbon nanotubes content on microstructure and mechanical properties of CNTs/Ti–Mo–Nb–Al–Si composites. Applied Physics A.DOI
77. Bin Cao, Xiaojing Xu, Chong Li, Rikai Zhang, Qingjun Liu, Xu Zhang, Hao Chen, Xiang Bai, Chaoxing Hu (2021). High-temperature oxidation behavior of TiC and TiC + TiB reinforced TB8 matrix composites prepared by spark plasma sintering. Applied Physics A.DOI
78. Hao Wang, Xiaojing Xu, Yangguang Liu, Chengbin Cai, Zhiwei Sun, Mengnan Han, Shaohui Sha, Vitus Mwinteribo Tabie (2021). Effect of SiC Content on Hot Corrosion Resistance of TiC and Ti5Si3 Reinforced Ti-Al-Sn-Zr Titanium Matrix Composites. Journal of Materials Engineering and Performance.DOI
79. Guoqing Gao, Jinming Ru, Jun Hua Cheng, Jianwei Li, Yuhua Zhou, Xiaojing Xu, Jucai Du (2021). Microstructure and Oxidation Resistance of Graphene/Ti-Al-Sn-Zr-Nb-Mo-Si Composites Prepared by Spark Plasma Sintering. Journal of Materials Engineering and Performance.DOI
80. Chen Li, Xiaojing Xu, Rikai Zhang, Xiaopeng Jin, Peng Zhang, Hongbo Wei, Yuan Zhuang (2021). Effect of Forging on Microstructure and Properties of Al-9Si-5Cu-0.2Zr-0.1Sr-0.16Ti-0.1Ce Cast Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
81. Hao Wang, Xiaojing Xu, Yangguang Liu, Saifu Wang, Zhiwei Sun, Mengnan Han, Shaohui Sha (2021). Hardness and Oxidation Resistance of In Situ Synthesized Multi-phase (TiB + TiC + Ti5Si3) Hybrid-Reinforced Ti555-Type Titanium Matrix Composites. Journal of Materials Engineering and Performance.DOI
82. Vitus Mwinteribo Tabie, Xiaojing Xu, Li jian Wei, Xiaodong Shi (2021). The Effect of Zirconium and Yttrium Oxide on the Microstructure and Mechanical Properties of Ti-Si-Zr Based Composites. ES Materials & Manufacturing.DOI
83. 韦宏博，许晓静，朱亮亮，汪洋，吴华锋，朱劲松（2020）. 冷挤压对高合金化7000系铝合金抗腐蚀性能的影响. 《金属热处理》.
84. 刘阳光，许晓静，宋振华，汪洋，朱亮亮，朱劲松（2020）. 氧化镧添加剂和盐浴共渗温度对TC4钛合金硼氧共渗组织与性能的影响. 《金属热处理》.DOI
85. 汝金明，王月美，阮红雁，周玉华，许晓静，李建伟（2020）. SPS制备Ti-18Mo-xSi合金的高温氧化行为研究. 《稀有金属材料与工程》.
86. Yongzhong Fu, Yuan Zhuang, Xiaojing Xu, Rikai Zhang, Peng Zhang, Hongbo Wei, Xiaopeng Jin, Zheng Liu, Bin Zhang, Jing Bo Wu, Xingbiao Sun (2020). Mechanical Properties and Corrosion Resistance of an Al-Zn-Mg-Cu Aluminum Matrix Composite with In Situ Synthesis of Al3Zr and ZrB2 by Mixed Salt Reaction. Journal of Materials Engineering and Performance.DOI
87. Yangguang Liu, Xiaojing Xu, Yishui Xiao, Saifu Wang, Shihao Ju (2020). Effect of B4Cp content on microstructure and the high-temperature oxidation behavior of Ti-5.4Al-4.03Mo-3.93V-2.37Cr-0.01Zr composites. Materials Research Express.DOI
88. Yangguang Liu, Xiaojing Xu, Yishui Xiao, Tianqing Niu, Vitus Mwinteribo Tabie, Chong Li, Chen Li (2020). High-Temperature Oxidation Behavior of Al-Modified Boronized Coating Prepared on Ti-6Al-4V by Thermal Diffusion. Journal of Materials Engineering and Performance.DOI
89. Yanhu Zhang, Hao Fu, Xinwei Wang, Hongyu Liang, Julius Caesar Puoza, Jinghu Ji, Xijun Hua, Xiaojing Xu, Yonghong Fu (2020). Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature. Coatings.DOI
90. Jinming Ru, Guoqing Gao, Jun Hua Cheng, Yuhua Zhou, Xiaojing Xu, Jucai Du, Jianwei Li (2020). Microstructure and oxidation behaviour of graphene nanoplatelets / titanium composites prepared by spark plasma sintering. Materials Chemistry and Physics.DOI
91. Xiaojing Xu, Xiaopeng Jin, Zheng Ping Liu, Bin Zhang, Rikai Zhang, Yuan Zhuang, Peng Zhang, Hongbo Wei (2020). Influence of large amount Zn on mechanical properties and corrosion resistance of 5083 hot rolled aluminum alloy. Applied Physics A.DOI
92. Xiaojing Xu, Peng Zhang, Rikai Zhang, Xiaopeng Jin, Yuan Zhuang, Hongbo Wei, Bin Zhang, Zheng Liu, Keren Zhang (2020). Effect of multi-stage solution on microstructure and properties of Al–10.5Zn–2.05Mg–1.02Cu–0.2Zr–0.923Ti alloy extrusion. Applied Physics A.DOI
93. Xiaojing Xu, Qingjun Liu, Qiang Mao, Ze Chao Jiang, Tianci Zhang, Hao Chen, Xu Zhang, Donghui Du (2020). Effect of extrusion-ECA integrated large strain technology on microstructure and properties of 7075 aluminum alloy. Applied Physics A.DOI
94. Xiaojing Xu, Haifei Lu, Kaiyu Luo, Jianhua Yao, Lin Xu, Jinzhong Lu, Yongfeng Lu (2020). Mechanical properties and electrochemical corrosion resistance of multilayer laser cladded Fe-based composite coatings on 4Cr5MoSiV1 steel. Journal of Materials Processing Technology.DOI
95. Xiaojing Xu, Hao Chen, Ze Chao Jiang, Vitus Mwinteribo Tabie, Qingjun Liu, Xu Zhang, Qiang Mao, Xiaoyu Zhang (2020). Parameter optimization of extrusion-Bc ECA technology and its effect on microstructure and properties of 7075 aluminum alloy. Applied Physics A.DOI
96. Xiaojing Xu, Yangguang Liu, Vitus Mwinteribo Tabie, Chengbin Cai, Yishui Xiao, Xu Zhang, Chong Li, Ze Chao Jiang, Qingjun Liu, Hao Chen (2020). High-temperature oxidation resistance of a Ti–Al–Sn–Zr titanium matrix composites reinforced with in situ TiC and Ti5Si3 fabricated by powder metallurgy. Applied Physics A.DOI
97. Vitus Mwinteribo Tabie, Chong Li, Saifu Wang, Jianwei Li, Xiaojing Xu (2020). Mechanical properties of near alpha titanium alloys for high-temperature applications - a review. Aircraft Engineering and Aerospace Technology.DOI
98. Xiaojing Xu, Xiaopeng Jin, Zheng Liu, Bin Zhang, Rikai Zhang, Yuan Zhuang, Peng Zhang, Hongbo Wei (2020). Microstructure and properties of a new Al–Cu–Mg–Zn–Zr–Ti heat resistant aluminum alloy. Materials Research Express.DOI
99. Jinming Ru, Ya Wang, Yuemei Wang, Xiaojing Xu (2020). Microstructure, phase composition and oxidation behavior of porous Ti-Si-Mo intermetallic compounds fabricated by reactive synthesis. High Temperature Materials and Processes.DOI
100. Weiwei Song, Xiaojing Xu, Shengrong Liu, Jiafei Pu, Hongfeng Wang (2020). Metallographic organization and tensile properties of FSSP-modified H62 copper alloy surface. Advanced Composites Letters.DOI
101. Hao Chen, Zhi Wang, Xiaojing Xu, Vitus Mwinteribo Tabie, Ze Chao Jiang, Qiang Mao, Hao Wang, Qingjun Liu, Xu Zhang, Yangguang Liu, Yishui Xiao (2020). Effect of solid solution heat treatment following age hardening on microstructure and mechanical properties of 7000 series power aluminum alloy. Materials Research Express.DOI
102. Chen Li, Xiaojing Xu, Hanhui Chen, Vitus Mwinteribo Tabie, Jie Cai, Yangguang Liu, Zheng Liu, Ching‐Tun Peng (2020). Effect of Zn/Mg Ratio on Microstructure and Properties of Cold Extruded Al-xZn-2.4Mg-0.84Cu-0.2Zr-0.25Ti Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
103. 张晓宇，许晓静，杜东辉，刘志刚，童浩，蔡成彬（2019）. 锻造对30CrNi2MoV钢在亚温淬火下组织与性能的影响. 《材料科学与工艺》.
104. 张进松，许晓静，张洁，张冲，王天伦，陈汉辉，张可人（2019）. Zn、Mg对5A06型铝合金热轧材性能的影响. 《金属热处理》.
105. 王浩，许晓静，朱宸煜，黄晶（2019）. 化学镀Ni-Sn-P复合镀层的耐腐蚀性能. 《热加工工艺》.DOI
106. 王浩，许晓静，朱宸煜，朱金鑫（2019）. Zr对Al-8.8Zn-2.3Mg-1.8Cu-(0.38～0.57)Zr高强轧制铝合金组织和性能的影响. 《热加工工艺》.DOI
107. Qingjun Liu, Ruifang Chen, Xiaojing Xu, Qiang Mao, Ze Chao Jiang, Tianci Zhang, Hao Chen, Xu Zhang, Yangguang Liu, Yishui Xiao (2019). Effect of pre-recovery and aging treatment on anisotropy of microstructure and properties of Al–7.0Zn–1.41Mg–1.50Cu–0.14Zr–0.023 Sr alloy. Materials Research Express.DOI
108. Yangguang Liu, Jinming Ru, Ze Chao Jiang, Vitus Mwinteribo Tabie, Chong Li, Hao Chen, Xiaojing Xu (2019). Microstructure and oxidation resistance of a Ti–Mo–Nb–Al–Si titanium matrix composite reinforced with in situ TiC prepared by powder metallurgy. Applied Physics A.DOI
109. Xiaopeng Jin, Xiaojing Xu, Zheng Liu, Bin Zhang, Rikai Zhang, Yuan Zhuang, Peng Zhang, Hongbo Wei (2019). Effect of pre-recovery heat treatment on microstructure and mechanical properties of cold extruded 2219–0.89Ti aluminum alloy. Materials Research Express.DOI
110. Hongbo Wei, Xiaojing Xu, Zheng Liu, Bin Zhang, Xiaopeng Jin, Rikai Zhang, Peng Zhang, Yuan Zhuang (2019). Effect of Zn/Mg ratio on the microstructure and properties of Al-xZn-2.0Mg-1.0Cu-0.2Zr-yTi ultrahigh-strength aluminum alloy extrusion. Materials Research Express.DOI
111. Yangguang Liu, Xiaojing Xu, Vitus Mwinteribo Tabie, Chong Li, Ze Chao Jiang, Qingjun Liu, Yishui Xiao, Xu Zhang (2019). Hot corrosion resistance of a Ti–Mo–Nb–Al–Si titanium matrix composites reinforced with in-situ TiC prepared by powder metallurgy. Materials Research Express.DOI
112. Yongzhong Fu, Yuan Zhuang, Xiaojing Xu, Jinsong Zhang, Zheng Liu, Bin Zhang, Xiaopeng Jin, Rikai Zhang, Peng Zhang, Hongbo Wei (2019). Effect of Ti content and hot/cold extrusion on microstructure and properties of 2219 heat-resistant aluminum alloy. Materials Research Express.DOI
113. Yong Zhong Fu, Ze Chao Jiang, Vitus Mwinteribo Tabie, Xiaojing Xu, Qingjun Liu, Hao Chen, Qiang Mao, Tianci Zhang, Donghui Du (2019). Anisotropy of microstructure and properties of Al-10.22 Zn-2.87 Mg-1.2 Cu-0.213 Zr alloy. Materials Research Express.DOI
114. Vitus Mwinteribo Tabie, Xiaodong Shi, Jianwei Li, Chengbin Cai, Xiaojing Xu (2019). Tribological Properties of Ti–4Si–xZr–yY2O3/5TiO2 Composites Prepared by High-Energy Milling, Cold Pressing and Sintering. International Journal of Precision Engineering and Manufacturing.DOI
115. Xiaojing Xu, Qiang Mao, Ze Chao Jiang, Vitus Mwinteribo Tabie, Tianci Zhang, Weijie Jia, Chengyu Zhu, Hao Wang (2019). Effect of multi-stage solution and aging process on microstructure and properties of Al-11.2Zn-3.0Mg-1.3Cu-0.2Zr aluminum alloy extrusion. Materials Letters.DOI
116. Weiwei Song, Dunwen Zuo, Xiaojing Xu, Hongfeng Wang, Shengrong Liu (2019). Electrochemical Corrosion Performance of FSSP-Modified Copper Alloy Surface. International Journal of Electrochemical Science.DOI
117. Xiaojing Xu, Zheng Ping Liu, Bin Zhang, Hanhui Chen, Jinsong Zhang, Tianlun Wang, Keren Zhang, Jie Zhang, Peng Huang (2019). Effect of Mn content on microstructure and properties of 6000 series aluminum alloy. Applied Physics A.DOI
118. Vitus Mwinteribo Tabie, Xiaojing Xu, Ze Chao Jiang, Zhang Xiaoyu, Chong Li, Saifu Wang, Yangguang Liu (2019). Effect of extrusion-Bc ECA integration technology on microstructure and properties of Al–Zn–Mg–Cu–Zr alloy. Materials Research Express.DOI
119. Xiaojing Xu, Chong Li, Saifu Wang, Vitus Mwinteribo Tabie, Zhigang Liu, Tianci Zhang (2019). Microstructural evolution and mechanical properties of Al–Zn–Mg–Cu alloy processed by integrated extrusion and equal channel angular pressing (iECAP) and heat treatment. Materials Research Express.DOI
120. Jinming Ru, Yuemei Wang, Yuhua Zhou, Ze Chao Jiang, Xiaojing Xu, Jianwei Li (2019). Effect of Si on the Microstructure and Oxidation Resistance of Ti-Mo Alloys. JOM.DOI
121. Weiwei Song, Xiaojing Xu, Liu Shengrong, Pu Jiafei, Xiaole Ge (2019). Effect on the Wear Resistance of Copper Alloy Surface Modification Layer by FSSP Implanting W Particles. MATERIALS TRANSACTIONS.DOI
122. Ze Chao Jiang, Xiaojing Xu, Hao Chen, Qingjun Liu, Xu Zhang, Kai Xiang Zhou, Jing Huang (2019). Effect of submicron Sn and heat treatment temperature on corrosion resistance of Ni-P composite coatings. Materials Research Express.DOI
123. Zheng Liu, Xiaojing Xu, Bin Zhang, Hanhui Chen, Tianlun Wang, Jinsong Zhang, Keren Zhang, Jie Zhang, Fan Yang (2019). Effect of Mn element on microstructure and properties of 7000 series ultra high strength rolled aluminum alloy. Materials Research Express.DOI
124. Lijie Zuo, Bing Ye, Jian Xiang Feng, Xiaojing Xu, Xiangyang Kong, Haiyan Jiang (2019). Effect of δ-Al3CuNi phase and thermal exposure on microstructure and mechanical properties of Al-Si-Cu-Ni alloys. Journal of Alloys and Compounds.DOI
125. Qian Zhu, Chao Zhang, Jose Luis Curiel-Sosa, Tinh Quoc Bui, Xiaojing Xu (2019). Finite element simulation of damage in fiber metal laminates under high velocity impact by projectiles with different shapes. Composite Structures.DOI
126. Xiaojing Xu, Yangguang Liu, Vitus Mwinteribo Tabie, Yang Song, Chengbin Cai, Yishui Xiao, Hao Chen, Qingjun Liu, Xu Zhang, Chong Li, Saifu Wang, Ze Chao Jiang (2019). Effect of La2O3 on resistance to high-temperature oxidation and corrosion of aluminized and aluminum-chrome coating. Materials Research Express.DOI
127. Xiaojing Xu, Ze Chao Jiang, Vitus Mwinteribo Tabie, Qiang Mao, Tianci Zhang, Hao Chen, Qingjun Liu, Xu Zhang, Yangguang Liu, Yishui Xiao, Hao Wang (2019). Effect of SiCw volume fraction and cold pressure on microstructure and mechanical properties of aluminum matrix composites. Materials Research Express.DOI
128. Xiaojing Xu, Chong Li, Vitus Mwinteribo Tabie, Saifu Wang, Chengbin Cai, Yangguang Liu, Yishui Xiao, Shuoming Huang (2019). Microstructure and properties of Ti-Al-Sn-Zr-Nb-Si matrix composite reinforced with in-situ TiC and Ti5Si3 prepared by powder metallurgy. Materials Research Express.DOI
129. Qingjun Liu, Xiaojing Xu, Ze Chao Jiang, Chenyu Zhu, Tianci Zhang, Qiang Mao, Hao Chen, Xu Zhang (2019). Effect of solution and aging system on microstructure and mechanical properties of 7000 series aluminum alloy produced by powder metallurgy. Materials Research Express.DOI
130. Saifu Wang, Xiaojing Xu, Chong Li, Chengbin Cai, Shihao Ju, Huang Jindong, Wang Chengsong, Qing Ding (2019). Effect of pre-recovery on microstructure and properties of rolled Al-12.51Zn-2.85Mg-2.83Cu-0.18Zr-0.06Sr aluminum alloy. Materials Research Express.DOI
131. Chong Li, Xiaojing Xu, Saifu Wang, Vitus Mwinteribo Tabie, Yang Song, Tianci Zhang, Yangguang Liu (2019). High-temperature oxidation and hot corrosion behavior of the Cr-modified aluminide coating obtained by a Thermal Diffusion process. Materials Research Express.DOI
132. Tianlun Wang, Xiaojing Xu, Jie Zhang, Hanhui Chen, Chenyu Zhu, Jinsong Zhang, Keren Zhang (2019). Effect of Mg on microstructure and properties of 6000 series high strength and high ductility aluminum alloy. Materials Research Express.DOI
133. Xiaojing Xu, Ze Chao Jiang, Qiang Mao, Tianci Zhang, Donghui Du, Chenyu Zhu, Hao Wang (2019). Effect of multi-stage solution and aging process on microstructure and properties of Al–10.7Zn–2.8Mg–1.2Cu–0.2Zr aluminum alloy extrusion materials. Materials Research Express.DOI
134. Chengbin Cai, Xiaojing Xu, Jindong Huang, Shi-hao Ju, Qing Ding, Cheng-song Wang (2019). Effect of pre-recovery on microstructure and properties of rolled Al-12.18Zn-3.31Mg-1.43Cu-0.20Zr-0.04Sr aluminum alloy. International Journal of Minerals Metallurgy and Materials.DOI
135. Ze Chao Jiang, Xiaojing Xu, Chenyu Zhu, Qiang Mao, Tianci Zhang, Hao Wang, Weijie Jia (2019). Anisotropy of microstructure and properties of high strength hot-extruded processed aluminum alloy. Materials Research Express.DOI
136. Bin Zhang, Xiaojing Xu, Zheng Liu, Jie Zhang, Yuan Zhuang, Peng Zhang, Rikai Zhang, Hongbo Wei, Xiaopeng Jin, Tianlun Wang (2019). Effect of Zn/Mg ratio on T6 state microstructure and properties of Al-xZn-2.6Mg-0.94Cu-0.2Zr-0.8Ti cold extruded aluminum alloy. Materials Research Express.DOI
137. Qiang Mao, Xiaojing Xu, Ze Chao Jiang, Chenyu Zhu, Tianci Zhang, Qingjun Liu, Hao Chen, Xu Zhang (2019). Effect of SiCp volume fraction on microstructure and properties of powder metallurgy SiCp reinforced aluminum matrix composites. Materials Research Express.DOI
138. Xu Zhang, Xiaojing Xu, Ze Chao Jiang, Qiang Mao, Tianci Zhang, Hao Chen, Qingjun Liu, Hao Wang (2019). Effect of SiCw volume fraction on microstructure and properties of SiCw/Al composite fabricated by hot isostatic pressing-hot pressing. Materials Research Express.DOI
139. Xiaojing Xu, Zheng Liu, Jie Zhang, Tianlun Wang, Bin Zhang (2019). Effect of Ti content on microstructure and properties of Al-9.9Zn-2.6Mg-0.91Cu-0.2Zr-xTi aluminum alloy. Materials Research Express.DOI
140. Xiaojing Xu, Ze Chao Jiang, Vitus Mwinteribo Tabie, Tianqing Niu, Qiang Mao, Tianci Zhang, Hao Wang, Chenyu Zhu (2019). Effect of surface boroaluminizing on thermal corrosion behavior of TC4 (Ti-6AL-4V) titanium alloy. Materials Research Express.DOI
141. Hongyu Liang, Meijuan Xu, Yongfeng Bu, Beibei Chen, Yanhu Zhang, Yonghong Fu, Xiaojing Xu, Junyan Zhang (2019). Confined interlayer water enhances solid lubrication performances of graphene oxide films with optimized oxygen functional groups. Applied Surface Science.DOI
142. Vitus Mwinteribo Tabie, Xiaodong Shi, Jianwei Li, Chengbin Cai, Chong Li, Xiaojing Xu (2019). High temperature oxidation and corrosion resistances of Ti-4Si-xZr-yY2O3/5TiO2 composites prepared by high-energy milling and cold pressed sintering. Materials Research Express.DOI
143. Chong Li, Xiaojing Xu, Saifu Wang, Chengbin Cai, Shi-hao Ju, Jindong Huang, Yang Song (2019). Microstructure and properties of Al and Al-Cr coatings on nickel-based superalloy GH625 by a thermal diffusion process. Materials Research Express.DOI
144. Jie Cai, Chengzuan Gao, Peng Lv, Conglin Zhang, Qingfeng Guan, Jinzhong Lu, Xiaojing Xu (2019). Hot corrosion behaviour of thermally sprayed CoCrAlY coating irradiated by high-current pulsed electron beam. Journal of Alloys and Compounds.DOI
145. 刘庆辉，许晓静，戈晓岚，吴桂兰，仲奕颖，何星华，韩天，陈洋（2018）. 添加Cu对Ti-16.28Si合金高温抗氧化行为的影响. 《稀有金属材料与工程》.
146. 丁清，许晓静，张景玉，徐驰，陈洋，汪成松，朱金鑫，杨帆（2018）. 预回复对Al-10.78Zn-2.78Mg-2.59Cu-0.22Zr-0.047Sr铝合金组织与性能的影响. 《稀有金属材料与工程》.
147. 戈晓岚，韩天，许晓静，刘庆辉，吴刘军，仲奕颖（2018）. Ti-8Si-xZr-yY2O3合金的摩擦磨损性能研究. 《稀有金属材料与工程》.
148. 许晓静，赵建吉，谈成，张香丽，杨帆，朱金鑫（2018）. 不同形变储能超高强铝合金在不同速度升温过程中的微结构演变. 《稀有金属材料与工程》.
149. 黄鹏，许晓静，崔熙贵，贾伟杰，杜东辉，张冲（2018）. 升温速率和固溶时间对超高强铝合金挤压材组织性能的影响. 《铸造技术》.
150. 张晓宇，许晓静，陈瑞芳，杜东辉，童浩，刘志刚，黄锦栋（2018）. 锻造加工对30CrNi2MoV钢在空冷回火下的组织与性能的影响. 《锻压技术》.
151. 张晓宇，许晓静，陈瑞芳，徐驰，刘志刚，童浩（2018）. 二次热压缩对Al-13.0Zn-3.16Mg-2.8Cu-0.2Zr-0.07Sr合金组织和性能的影响. 《轻合金加工技术》.
152. 张冲，许晓静，张洁，黄鹏，杜东辉，贾伟杰（2018）. 固溶升温速率对Al-10.78Zn-2.78Mg-2.59Cu铝合金组织与性能的影响. 《机械工程材料》.
153. 张福豹，许晓静，刘志刚，居志兰，金宇阳（2018）. 固溶前预变形对6013型铝合金晶粒取向和组织性能的影响. 《金属热处理》.
154. 史小冬，许晓静，汝金明，赵倩，王亚（2018）. Ti-8.0Si-1.4Zr-xY2O3合金的热腐蚀性能. 《材料保护》.
155. 许晓静，贾伟杰，黄鹏，杜东辉，张冲，张景玉（2018）. 不同时效工艺处理Al-Zn-Mg-Cu铝合金的各向异性. 《金属热处理》.
156. 何志盛，许晓静，韩天，张洁，郑刚，杨松（2018）. Ti-6Al-4V合金的盐浴硼氧共渗. 《金属热处理》.
157. 张晓宇，许晓静，杜东辉，童浩，刘志刚，居士浩（2018）. 锻造加工对30CrNi2MoV钢在低温长时间回火下组织与性能的影响. 《有色金属(中英文)》.
158. 赵倩，许晓静，汝金明，史小冬，王亚（2018）. Cu含量对(Ti-8Si)-xCu合金摩擦磨损性能的影响. 《粉末冶金材料科学与工程》.
159. 许晓静，刘志刚，陈洋，童浩，张晓宇，贾伟杰（2018）. 预回复对7085铝合金各向组织与性能的影响. 《金属热处理》.
160. 韩天，许晓静，戈晓岚，仲奕颖，刘庆辉，陈婷卓（2018）. Ti-8Si-1.4Zr-xY2O3合金高温氧化行为的研究. 《稀有金属》.DOI
161. 许晓静，杨帆，赵建吉，朱金鑫，丁清，汪成松（2018）. 升温速率与固溶时间对超高强铝合金挤压材组织性能的影响. 《稀有金属》.DOI
162. Xiaojing Xu, Chenyu Zhu, Hao Wang, Weijie Jia, Donghui Du, Chengbin Cai, Tianlun Wang (2018). Effect of Zn/Mg and Cu/Mg on microstructure and properties of Al-xZn-3.0Mg-yCu-0.2Zr rolled aluminum alloy. Materials Research Express.DOI
163. Chenyu Zhu, Xiaojing Xu, Hao Wang, Jixin Zhu, Fan Yang (2018). Effect of Mg on microstructure and properties of Al-8.95Zn-(1.9 ∼ 2.6)Mg-1.18Cu-0.44Zr rolled aluminum alloy. Materials Research Express.DOI
164. Fubao Zhang, Xiaojing Xu, Zhigang Liu, Zhilan Ju, Yuyang Jin (2018). Microstructures and Mechanical Properties of Rolled 6013 Type Aluminum Alloy. International Symposium on Mechanical Engineering and Material Science (ISMEMS).DOI
165. Hongyu Liang, Yongfeng Bu, Yanhu Zhang, Xiaojing Xu, Junyan Zhang (2018). Conversion of organic films into fluorine-containing onion carbon as anti-adhesion solid lubricants. Materials Letters.DOI
166. 徐琳，丁建宁，许晓静，何远清，雷小春（2017）. 纯钛材与大变形纯钛材微弧氧化-水热合成复合陶瓷膜层的细胞相容性研究. 《稀有金属材料与工程》.
167. 王亚，汝金明，周玉华，许晓静，刘庆辉，王月美，史晓东（2017）. Cu元素对Ti-16.28Si合金在900℃下氧化机制的影响. 《钛工业进展》.
168. 张景玉，许晓静，阮鸿雁，卢予东（2017）. 回复态超纯铝大变形组织与强化机理的研究. 《热加工工艺》.
169. 徐驰，许晓静，马文海，董小飞，卢予东，郭云飞（2017）. 回复态Al-1.5%Mg单相合金大变形组织与强化机制. 《稀有金属》.DOI
170. 吴刘军，许晓静，陈婷卓，朱利华（2017）. 球磨冷压烧结制备TNZS基生物材料的摩擦学性能. 《稀有金属材料与工程》.
171. 许晓静，朱金鑫，郭云飞，马文海，王子路（2017）. 固溶-冷变形-时效工艺下超高强Al-Zn-Mg-Cu系铝合金的组织及性能. 《稀有金属材料与工程》.
172. 张景玉，许晓静，阮鸿雁，马文海，王子路，郭云飞（2017）. 热机械处理对Al-10.78Zn-2.78Mg-2.59Cu-0.22Zr-0.047Sr铝合金固溶时效态组织及力学性能的影响. 《稀有金属材料与工程》.
173. 朱利华，吴刘军，许晓静，陈婷卓（2017）. 粉末冶金制备TNZS基生物材料的体外组织相容性. 《稀有金属材料与工程》.
174. 戈晓岚，仲奕颖，许晓静，陶俊，刘庆辉，吴桂兰，何星华（2017）. TC4钛合金表面激光合金化Ti-Al-Nb涂层的研究. 《稀有金属材料与工程》.
175. 朱利华，吴刘军，许晓静，陈婷卓（2017）. 粉末冶金制备TNZS基生物材料的组成、结构和性能. 《稀有金属材料与工程》.
176. 吴桂兰，许晓静，戈晓岚，陶俊，刘庆辉，仲奕颖，何星华（2017）. TC4钛合金表面激光合金化制备Ti-Si涂层. 《稀有金属材料与工程》.
177. 徐琳，丁建宁，许晓静，何远清，雷小春（2017）. 钛基表面TiO2-HA生物陶瓷膜层的血液相容性研究. 《稀有金属材料与工程》.
178. 许晓静，王子路，陆文俊，郭云飞，马文海，陈洋，徐驰，张景玉（2017）. 固溶-大变形-时效下7085铝合金的强化机理. 《稀有金属材料与工程》.
179. 何星华，许晓静，戈晓岚，陶俊，仲奕颖，刘庆辉，吴桂兰（2017）. TC4钛合金表面激光熔覆含La2O3的F101镍基涂层. 《稀有金属材料与工程》.
180. 许晓静，蒋伟，邓平安，张香丽，谈成，孙良省，范亚洲（2017）. 预回复对Al-11.5Zn-3.5Mg-2.3Cu-0.24Zr挤压材固溶-T652组织与性能的影响. 《稀有金属材料与工程》.
181. 许晓静，徐琳，牛小丫，丁建宁，朱利华（2017）. 纯钛材与大变形纯钛材微弧氧化膜层的力学性能研究. 《稀有金属材料与工程》.
182. 徐琳，丁建宁，许晓静，李伯全，杜明星（2017）. 大变形纯钛微弧氧化膜层的生物摩擦学性能. 《稀有金属材料与工程》.
183. 宋娓娓，许晓静（2017）. FSSP制备SiC/H62铜合金组织及磨损性能分析. 《功能材料》.
184. 丁清，许晓静，汪成松，朱金鑫，杨帆，黄晶（2017）. Sc微合金化纯铝大变形组织与强化机制. 《稀有金属》.
185. 杜东辉，许晓静，张晓宇，贾伟杰，张冲，黄鹏（2017）. 常规奥氏体化后后续热处理对35CrNi3MoV钢组织与性能的影响. 《材料热处理学报》.
186. 许晓静，汪成松，郭云飞，丁清，黄晶，朱金鑫，杨帆（2017）. 固溶-冷变形-预回复对Al-13.01Zn-3.16Mg-2.8Cu-0.204Zr-0.0757Sr铝合金组织与性能的影响. 《材料热处理学报》.
187. 韩天，许晓静，戈晓岚，刘庆辉，吴桂兰，仲奕颖（2017）. 铁的添加方式对TC4钛合金盐浴硼氧共渗的影响. 《材料热处理学报》.
188. 许晓静，汪成松，丁清，陈洋，徐驰，黄晶，朱金鑫，杨帆（2017）. 热压缩-ECAP-热压缩-预回复-固溶-时效下7085铝合金组织性能及各向异性. 《材料热处理学报》.
189. 杨松，韩天，许晓静，阮鸿雁，戈晓岚，何志盛，刘庆辉（2017）. TD处理42CrMo合金钢制备多孔碳化钒(VC)层. 《粉末冶金材料科学与工程》.
190. Weiwei Song, Xiaojing Xu, Dunwen Zuo, Jianli Wang, Gang Wang (2017). Effect of Processing Parameters and Temperature on Sliding Wear of H62 Copper Alloy Modified by Friction Stir Surface Processing. Materials Science.DOI
191. Xiaojing Xu, Weijie Jia, Cheng Tan, Donghui Du, Peng Huang, Chong Zhang (2017). Microstructure evolution of 7085 aluminum alloy with different initial deformation energy storage in fast and slow heating process. Materials Research Express.DOI
192. 徐琳，丁建宁，许晓静，李伯全，牛小丫（2016）. TA2表面微弧氧化-水热合成复合陶瓷膜层结构及其表面能分析. 《稀有金属材料与工程》.
193. 张香丽，许晓静，凌智勇，蒋伟，谈成，赵建吉（2016）. 预变形对超高强铝合金挤压材组织性能的影响. 《中国有色金属学报》.
194. 陈洋，许晓静，陆文俊，王子路，徐驰，张景玉（2016）. 固溶—大变形—时效下7085铝合金的晶间腐蚀和剥落腐蚀. 《稀有金属》.
195. 张香丽，许晓静，凌智勇，吴瑶，孙良省，范亚洲（2016）. 含锆锶Al-Zn-Mg-Cu系高强铝合金热处理工艺的优化. 《稀有金属》.
196. 谈成，许晓静，范亚洲，赵建吉，张香丽，陈洋（2016）. 双级时效对超高强铝合金Al-12.26Zn-2.96Mg-2.49Cu-0.183Zr-0.0673Sr挤压材组织与力学性能的影响. 《热加工工艺》.
197. 张超，周晔欣，杨志贤，许晓静（2016）. 三维四向编织复合材料界面损伤机理数值分析. 《复合材料学报》.
198. 徐驰，许晓静，郭云飞，马文海，王子路，陈洋（2016）. 热机械加工对Al-13.0Zn-3.16Mg-2.8Cu-0.2Zr-0.07Sr合金组织与性能的影响. 《材料热处理学报》.
199. 许晓静，朱金鑫，杨帆，丁清，汪成松，韩天（2016）. 预回复工艺对7085铝合金组织与性能的影响. 《材料热处理学报》.
200. 杨帆，许晓静，邓平安，朱金鑫，丁清，汪成松（2016）. T76时效对超高强铝合金力学性能与抗腐蚀性能的影响. 《材料热处理学报》.
201. 赵建吉，许晓静，陈洋，孙良省，谈成，张香丽（2016）. 预变形对超高强铝合金Al-Zn-Mg-Cu-Zr-Sr组织与性能的影响. 《稀有金属》.
202. 许晓静，朱金鑫，杨帆，丁清，汪成松，黄晶（2016）. 压缩大变形对7085铝合金固溶-时效组织性能的影响. 《材料热处理学报》.
203. 徐琳，丁建宁，杜明星，许晓静，吴刘军，牛小丫（2016）. 小牛血清润滑下钛基多孔陶瓷膜层的摩擦学性能. 《材料热处理学报》.
204. Weiwei Song, Xiaojing Xu, Dunwen Zuo, Jianli Wang (2016). Study on the corrosion of copper alloy by friction stir surface processing. Anti-Corrosion Methods and Materials.DOI
205. Jie Cai, Peng Lv, Qingfeng Guan, Xiaojing Xu, Jinzhong Lu, Zhiping Wang, Zhiyong Han (2016). Thermal Cycling Behavior of Thermal Barrier Coatings with MCrAlY Bond Coat Irradiated by High-Current Pulsed Electron Beam. ACS Applied Materials & Interfaces.DOI
206. 谈成，许晓静，蒋伟，孙良省，张香丽，范亚洲，赵建吉（2015）. 预回复对固溶-T652处理超高强铝合金挤压材组织与性能的影响. 《中国有色金属学报》.
207. 张兵，许晓静，陈树东，蒋伟（2015）. 锆和锶对铸态镍铝青铜组织与性能的影响. 《材料热处理学报》.
208. 孙良省，许晓静，蒋伟，范亚洲（2015）. 预回复对Al-13.0Zn-3.16Mg-2.8Cu-0.2Zr-0.07Sr铝合金挤压材在T652态组织与性能的影响. 《材料热处理学报》.
209. 吴瑶，许晓静，张振强，张允康，邓平安，孙良省（2015）. 预回复退火2099铝锂合金挤压材的组织和位错强化. 《稀有金属》.
210. 许晓静，陆文俊，蒋凌，卢予东，王子路，郭云飞（2015）. 轧制驱动ECA大应变加工及后续热处理对5052铝合金力学性能与晶体取向的影响. 《稀有金属》.
211. 徐琳，丁建宁，许晓静，牛小丫，李伯全，程广贵（2015）. 超细晶纯钛微弧氧化表面润湿性和耐腐蚀性能研究. 《稀有金属材料与工程》.
212. 莫纪平，程晓农，邓平安，许晓静，吴瑶，蒋伟（2015）. 多向压缩对7085铝合金挤压材组织和力学性能的影响. 《稀有金属材料与工程》.
213. 卢予东，许晓静，陆文俊，蒋凌，马文海，郭云飞，王子路（2015）. 轧制驱动-ECA大应变纯铝的强化机理. 《稀有金属材料与工程》.
214. 张香丽，许晓静，凌智勇，蒋伟（2015）. Al-10.78Zn-2.78Mg-2.59Cu-0.22Zr-0.047Sr铝合金挤压材的性能. 《材料研究学报》.
215. 范亚洲，许晓静，阮鸿雁，张允康，蒋伟，孙良省（2015）. 预回复工艺对7085铝合金挤压材微观组织与抗腐蚀性能的影响. 《材料热处理学报》.
216. 赵建吉，许晓静，谈成，张香丽，徐驰，陈洋（2015）. 强化固溶处理对7085铝合金组织与性能的影响. 《材料热处理学报》.
217. 郑刚，许晓静，宋振华，戈晓岚，刘庆辉，吴桂兰，仲奕颖（2015）. TC4钛合金盐浴硼氧共渗剂的成分. 《材料热处理学报》.
218. 张超，许希武，许晓静（2015）. 三维多向编织复合材料宏细观力学性能有限元分析研究进展. 《复合材料学报》.
219. 张兵，许晓静，蒋伟，范亚洲（2015）. 镍铝青铜化学镀镍磷合金和性能. 《热加工工艺》.
220. 范亚洲，许晓静，阮鸿雁（2015）. 强化固溶处理对含Sr 7085铝合金微观组织与力学性能的影响. 《热加工工艺》.
221. 陶俊，许晓静，戈晓岚，刘云辉，宋振华，何星华，吴桂兰（2014）. 氧化镧对TC4钛合金固体渗硼的影响. 《稀有金属材料与工程》.
222. 许晓静，蒋凌，陆文俊，卢予东，费震旦，成城（2014）. 轧制及后续热处理对5052铝合金拉伸性能与晶体取向的影响. 《稀有金属材料与工程》.
223. 徐琳，丁建宁，李伯全，许晓静，牛小丫（2014）. TA4微弧氧化陶瓷膜层的结构与性能研究. 《功能材料》.
224. 牛小丫，许晓静，盛新兰，张体峰，刘敏，朱利华（2014）. 超细晶纯钛阳极氧化表面性能研究. 《稀有金属材料与工程》.
225. 张福豹，许晓静，张允康，张振强，吴瑶（2014）. 反复镦压6013型铝合金的组织和性能. 《稀有金属材料与工程》.
226. 许晓静，张允康，邓平安，吴瑶，张振强，罗勇（2014）. 7085铝合金的淬透性. 《材料热处理学报》.
227. 王宏宇，程满，袁晓明，赵玉凤，许晓静（2014）. 强韧化65Mn钢低温稀土硼共渗层的组织和性能. 《材料热处理学报》.
228. 许晓静，张允康，邓平安，吴瑶，张振强，卢予东（2014）. 预回复退火对7085铝合金挤压材组织和性能的影响. 《材料热处理学报》.
229. 许晓静，吴瑶，张振强，邓平安，孙良省（2014）. 含Sr,Sc高锌2099铝锂合金的二级时效温度对腐蚀性能的影响. 《材料热处理学报》.
230. 邓平安，许晓静，莫纪平，蒋伟，程晓农，吴瑶（2014）. 多向压缩对7085铝合金挤压材组织和抗腐蚀性能的影响. 《材料热处理学报》.
231. 陆文俊，许晓静，卢予东，王子路，郭云飞，马文海（2014）. 后续热处理对轧制-ECA大应变纯铝组织及性能的影响. 《材料热处理学报》.
232. 魏建，许晓静，吴瑶，邓平安，范亚洲（2014）. 含Sr7085铝合金挤压棒材的时效处理. 《金属热处理》.
233. 吴桂兰，戈晓岚，许晓静，宋振华，陶俊，刘云辉，何星华（2014）. TC4钛合金表面氧化镧催渗渗硼工艺优化. 《金属热处理》.
234. 王子路，许晓静，陆文俊，卢予东，郭云飞，马文海（2014）. ECAP道次对Q235钢拉伸性能及位错强化的影响. 《热加工工艺》.
235. 郭云飞，许晓静，卢予东，陆文俊，马文海，王子路（2014）. 多道次工件间推挤式等通道转角大应变技术对应变均匀性的影响. 《热加工工艺》.
236. 马文海，许晓静，卢予东，成城，陆文俊，郭云飞，王子路（2014）. 大型工件间推挤式等通道转角大应变技术模具受力分析. 《热加工工艺》.
237. 蒋伟，许晓静，邓平安，吴瑶，孙良省（2014）. 含Sr的7085铝合金挤压材的各向断裂韧性. 《热加工工艺》.
238. 朱利华，许晓静，刘敏，牛小丫，陈婷卓（2014）. 微弧氧化对常规和超细TiNi合金表面性能的影响. 《中国有色金属学报》.
239. 许晓静，陈树东，潘励，魏建，侍国防（2014）. 锆微合金化铸态镍铝青铜的组织与性能. 《稀有金属》.
240. 宋振华，戈晓岚，许晓静，刘云辉，陶俊，吴桂兰（2014）. TC4钛合金固体渗硼催渗剂的研究. 《稀有金属》.
241. 吴瑶，许晓静，张振强，张允康，邓平安，孙良省（2014）. 多向锻造2099铝锂合金挤压材的组织和性能. 《稀有金属》.
242. 侍国防，许晓静，陈树东，魏建，潘励（2014）. 锶钛硼复合微合金化铸态锰黄铜组织与性能. 《有色金属(中英文)》.
243. 许晓静，刘敏，张体峰，凌智勇，盛新兰，陈丹（2013）. 超细晶TiNi表面磁控溅射CNx薄膜的纳米压痕与摩擦性能. 《稀有金属材料与工程》.
244. 陈康敏，艾世杰，许晓静（2013）. 固溶温度对6013铝合金组织和抗晶间腐蚀性能的影响. 《材料热处理学报》.
245. 魏建，许晓静，陈树东，侍国防（2013）. 含镁、锶、钛和硼铸态锰黄铜的组织与性能. 《铸造》.
246. 许晓静，朱利华，盛新兰，张体峰，刘敏，牛小丫（2013）. 电化学抛光和阳极氧化处理后TC4钛合金表面的生物活性. 《机械工程材料》.
247. 许晓静，陈树东，楚满军，潘励，魏建，侍国防（2013）. 钪、锆和锶复合微合金化铸态镍铝青铜的显微组织与性能. 《中国有色金属学报》.
248. 许晓静，张体峰，凌智勇，盛新兰，刘敏，牛小丫，朱利华（2013）. 超细晶TiNi合金电化学抛光表面的生物相容性. 《中国有色金属学报》.
249. 孙良省，许晓静，张振强，吴瑶，邓平安（2013）. 2099铝锂合金的淬透性研究. 《热加工工艺》.
250. 张福豹，许晓静，花国然，居志兰（2013）. 锶微合金化6013型铝合金的抗腐蚀性. 《热加工工艺》.
251. 刘云辉，许晓静，王宏宇，陈树东（2013）. 氧化锆对TC4钛合金固体渗硼的影响. 《热加工工艺》.
252. 胡华军，卞晓春，顾春卫，陆文俊，许晓静（2013）. 应用正火工艺消除35CrNi3MoV钢的组织遗传. 《热加工工艺》.
253. 陆文俊，许晓静，卢予东，费震旦，蒋凌（2013）. 大压下率对连轧驱动等通道转角大应变技术的影响. 《热加工工艺》.
254. 卢予东，许晓静，蒋凌，成城（2013）. 模具拐角对工件间推挤式等通道转角挤压技术的影响. 《热加工工艺》.
255. 邓平安，许晓静，张允康，张振强，吴瑶（2013）. Al-7.5Zn-1.5Mg-1.4Cu-0.15Zr 7085铝合金挤压材的热处理制度. 《热加工工艺》.
256. 张振强，许晓静，宋涛，张允康，罗勇，吴瑶，邓平安（2013）. 2099铝锂合金挤压材料组织与抗腐蚀性能的各向异性研究. 《热加工工艺》.
257. 许晓静，张允康，罗勇，张振强，宋涛，吴桂潮，吴瑶，邓平安，蒋凌（2013）. 7085铝合金强化固溶T7652处理后的拉伸与晶间腐蚀性能. 《稀有金属材料与工程》.
258. 张振强，许晓静，宋涛，张允康，罗勇，吴瑶，邓平安（2013）. 热机械加工对2099铝锂合金挤压材组织与抗腐蚀性能的影响. 《稀有金属材料与工程》.
259. 许晓静，盛新兰，张体峰，刘敏，牛小丫，朱利华（2013）. 超细晶纯钛材电化学抛光表面生物相容性研究. 《稀有金属材料与工程》.
260. 牛小丫，许晓静，盛新兰，张体峰，刘敏，朱利华（2013）. TA4电化学抛光和阳极氧化处理表面生物相容性的比较. 《功能材料》.
261. 艾世杰，陈康敏，许晓静，张福豹（2013）. 时效对锆-锶复合微合金化6013铝合金性能的影响. 《金属热处理》.
262. 吴瑶，许晓静，张振强，宋涛，张允康，罗勇，邓平安（2013）. 含锶钪2099铝锂合金的固溶处理. 《金属热处理》.
263. 胡华军，卞晓春，顾春卫，陆文俊，许晓静，王子路（2013）. 应用退火工艺消除35CrNi3MoV钢的组织遗传. 《金属热处理》.
264. 李桂荣，王宏明，申国庆，邵黎军，步小平，许晓静（2013）. 电磁场下离心复合制备高速钢轧辊和力学性能. 《复合材料科学与工程》.
265. 楚满军，许晓静，陈树东，潘励，魏建，伺国防（2013）. 锶钛硼复合微合金化铸态高锰铝青铜的组织与性能. 《有色金属(中英文)》.
266. 张振强，许晓静，宋涛，张允康，罗勇，吴瑶，邓平安（2013）. 2099铝锂合金挤压材的组织与力学性能. 《中国有色金属学报》.
267. 何星华，戈晓岚，许晓静，刘云辉，陶俊，宋振华（2013）. TC4钛合金表面氧化锆催渗渗硼工艺的优化. 《中国表面工程》.
268. Y.J. Chen, Yanjun Li, Xiaojing Xu, Jarle Hjelen, Hans J. Roven (2013). Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing. Materials Letters.DOI
269. Fengze Dai, Jian Lü, Y.K. Zhang, D.P. Wen, Luyang Zhang, Kaiyu Luo, Xiaojing Xu, L. Cai (2013). Effect of submicron SiC particle on friction and wear properties of copper matrix composites under oil-lubricated condition. Advanced Composite Materials.DOI
270. Jian Lü, J.S. Zhong, Kaiyu Luo, Luyang Zhang, H. Qi, M. Luo, Xiaojing Xu, Jianzhong Zhou (2013). Strain rate correspondence of fracture surface features and tensile properties in AISI304 stainless steel under different LSP impact time. Surface and Coatings Technology.DOI
271. Xiaojing Xu (2013). Effect of solid solution treatment temperature on microstructure and intergranular corrosion beharvior of 6013 aluminum alloy. Cailiao rechuli xuebao.
272. Xiaojing Xu (2013). Friction/Wear Properties of Magnetron Sputtered High-hard SiC Films on Ti6Al4V Alloy. Cailiao gongcheng.
273. 成城，许晓静，费震旦，蒋凌，罗勇（2012）. 200和400℃退火对ECAP形变40Cr钢拉伸性能与位错强化的影响. 《稀有金属材料与工程》.
274. 许晓静，宋涛，范真，张振强，罗勇，张允康，刘云辉（2012）. 含Sc 2099型铝锂合金的组织和位错强化. 《稀有金属材料与工程》.
275. 宋涛，许晓静，范真，罗勇，王彬，吴桂潮，张振强，张允康（2012）. 强化固溶处理对含Sr 2099型铝锂合金组织和位错强化的影响. 《稀有金属材料与工程》.
276. 罗勇，许晓静，吴桂潮，张允康，宋涛，王彬，张福豹，成城，费震旦（2012）. 强化固溶处理对7085铝合金晶间腐蚀和剥落腐蚀性能的影响. 《稀有金属材料与工程》.
277. 盛新兰，许晓静，张体峰，刘敏（2012）. 纳米晶Ti表面磁控溅射SiC薄膜在高载荷下的摩擦磨损性能. 《稀有金属材料与工程》.
278. 蒋凌，许晓静，费震旦，朱新董，成城（2012）. 摩擦与通道夹角对轧制驱动等通道转角大应变技术的影响. 《稀有金属材料与工程》.
279. 于春杭，邵红红，许晓静（2012）. 钛基材纳米化对TiO2薄膜力学性能影响研究. 《稀有金属材料与工程》.
280. 罗勇，许晓静，张允康，宋涛，王宏宇，张振强，张福豹，吴桂潮，吴瑶（2012）. 强化固溶对含Sr 7085型铝合金晶间腐蚀和剥落腐蚀性能的影响. 《航空材料学报》.
281. 许晓静，罗勇，张允康，宋涛，张振强，张福豹，吴桂潮，吴瑶（2012）. 强化固溶处理对含锶钪7085铝合金腐蚀性能的影响. 《材料热处理学报》.
282. 蒋凌，许晓静，费震旦，陆文俊，卢予东，成城（2012）. 异步轧制驱动的等通道转角大应变技术. 《热加工工艺》.
283. 罗勇，许晓静，张允康，张振强（2012）. 强化固溶处理对7075铝合金晶间腐蚀和剥落腐蚀性能的影响. 《热加工工艺》.
284. 张允康，许晓静，罗勇，吴桂潮，宋涛，张振强（2012）. Al-Zn-Mg-Cu系合金微合金化的研究现状与展望. 《热加工工艺》.
285. 李桂荣，王宏明，邵黎军，周军，周勤忠，许晓静（2012）. 脉冲磁场离心铸造高速钢轧辊及性能研究. 《铸造》.
286. 许晓静，朱利华，张体峰，凌智勇，盛新兰，刘敏，牛小丫（2012）. 不同阳极氧化时间下常规和超细晶TiNi合金的生物活性. 《中国表面工程》.
287. 宋涛，许晓静，范真，张振强，王彬，罗勇（2012）. 含锶钪2099型铝锂合金的晶间腐蚀和剥落腐蚀性能. 《稀有金属》.
288. 张振强，许晓静，宋涛，王彬，张允康，罗勇，吴桂潮（2012）. 强化固溶对含Sr2099型铝锂合金腐蚀性能的影响. 《材料热处理学报》.
289. 凌智勇，许晓静，张体峰，盛新兰，刘敏，牛小丫，朱利华（2012）. 电化学抛光时间对常规和超细晶TiNi合金生物活性的影响. 《功能材料》.
290. 王宏宇，赵玉凤，许晓静，沈清，吴志奎（2012）. 热处理对65Mn钢表面渗硼层组织和性能的影响. 《材料热处理学报》.
291. 许晓静，张允康，罗勇，张振强，宋涛，吴瑶，邓平安（2012）. 含Sr 7085铝合金挤压材的热处理制度. 《材料热处理学报》.
292. 张允康，许晓静，罗勇，宋涛，王宏宇，吴桂潮，张振强（2012）. 7075铝合金强化固溶T76处理后的拉伸与剥落腐蚀性能. 《稀有金属材料与工程》.
293. Xiaojing Xu, Qiong Wu, Shengkai Gong, Shusuo Li (2012). Effect of Cr and Re on the Oxidation Resistance of Ni 3 Al-base Single Crystal Alloy IC21 at 1100℃. 《中国材料大会2012第19分会场：高温合金论文集》.
294. Xiaojing Xu, Sheng Xin-lan, Zhang Tifeng, Min Liu, Xin Xi-ling (2012). Raman Spectrum and Friction Behaviors of Carbon-doped TiB2 Films Prepared by Magnetron Sputtering. Cailiao gongcheng.
295. 房士义，许晓静，周海，王彬，潘励，程晓农（2011）. 等通道转角变形与固溶处理对铸态7085铝合金微观组织的影响. 《机械设计与制造》.
296. 苗润生，许晓静（2011）. 600℃退火对等通道转角变形40Cr钢强度和位错强化的影响. 《金属热处理》.
297. 徐红星，程晓农，许晓静，宋刚，莫纪平（2011）. 超细亚晶粒铝合金的强化机理. 《江苏大学学报(自然科学版)》.
298. 许晓静，郝欣妮，陆树显，卓刘成，夏登福（2011）. 纳米晶体Ti表面磁控溅射SiC薄膜的干摩擦学性能. 《稀有金属材料与工程》.
299. 许晓静，王彬，吴桂潮，张福豹，宋涛，罗勇，程晓农（2011）. 锶微合金化高锌2099型铝合金抗晶间腐蚀及剥蚀性能. 《稀有金属材料与工程》.
300. 许晓静，吴桂潮，王彬，张福豹，罗勇，宋涛，成城，潘励，程晓农（2011）. 含Sr7085型铝合金的晶间腐蚀和剥落腐蚀性能. 《材料热处理学报》.
301. 于春杭，邵红红，许晓静，翟瑞（2011）. 纳米晶体钛基掺钽TiO2薄膜的摩擦磨损性能. 《材料研究学报》.
302. 王彬，许晓静，吴桂潮，张福豹，赵梓皓，房士义，潘励，张增雷（2011）. 等通道转角变形对铸态3003铝合金夹杂物的影响. 《材料科学与工程学报》.
303. 许晓静，郝欣妮，夏登福，陈丹，田琨，辛喜玲（2011）. 镁合金表面磁控溅射CNx/SiC双层膜的性能. 《机械工程材料》.
304. 许晓静，吴桂潮，王彬，张福豹，罗勇，宋涛，成城，潘励，程晓农（2011）. 7085铝合金固溶温度预热后的大应变变形强化. 《上海交通大学学报》.
305. 许晓静（2011）. 锶、锆复合微合金化对6013型铝合金组织和拉伸性能的影响. 《2011中国材料研讨会论文摘要集》.
306. 张福豹，许晓静，吴桂潮，王彬，罗勇，宋涛，程晓农（2011）. 锆微合金化6013型铝合金的抗晶间腐蚀性能. 《航空材料学报》.
307. 张增雷，许晓静，赵梓皓，成城（2011）. 连续ECAP大应变的数值模拟研究. 《机械设计与制造》.
308. Xiaojing Xu, WU Gui-chao, Wang Bin, Fubao Zhang, Luo Yong, Song Tao, Cheng Cheng, Pan Li, Xiaonong Cheng (2011). Sr addition on intergranular and exfoliation corrosion properties of 7085 aluminum alloy. Cailiao rechuli xuebao.
309. Xiaojing Xu (2011). Effect of 600 ℃ annealing on strength and dislocation strengthening of 40Cr steel processed by equal-channel angular pressing. Heat treatment of metals.
310. 于春杭，邵红红，许晓静，翟瑞（2010）. 纳米钛基TiO2薄膜生长特点和生物活性研究. 《功能材料》.
311. 郝欣妮，许晓静，夏登福，卓刘成，宗亮，王宏宇（2010）. 镁合金表面火焰喷涂及激光重熔Al-Si合金涂层的研究. 《航空材料学报》.
312. 赵光伟，邵红红，于春杭，许晓静，都红，翟瑞，郑倩文（2010）. 纳米晶体钛表面TiO2薄膜的制备及抗凝血性能. 《机械工程材料》.
313. 陈丹，许晓静，田琨，辛喜玲，于春杭，盛新兰（2010）. 钛合金表面磁控溅射TiB2-TiN复合薄膜的摩擦磨损性能. 《功能材料》.
314. 于春杭，邵红红，许晓静，翟瑞（2010）. 超细晶粒钛表面掺钽TiO2薄膜的微结构及血液相容性研究. 《功能材料》.
315. 张增雷，许晓静，赵梓皓，成城（2010）. 模具底部滑动对ECAP变形挤压载荷和应变的影响. 《热加工工艺》.
316. 许晓静，韦宝存，房士义，程晓农（2010）. 铝合金大厚板淬火残余应力数值分析. 《江苏大学学报(自然科学版)》.
317. 吴桂潮，许晓静，王彬，罗勇（2010）. 完全退火态40Cr钢ECAP加工后的拉伸性能. 《热加工工艺》.
318. 于春杭，邵红红，许晓静，翟瑞（2010）. Mg中间层对纳米钛表面TiO2薄膜微结构和动态凝血时间的影响. 《材料研究学报》.
319. 房士义，许晓静，周海，潘励，韦宝存，程晓农（2010）. 等通道转角变形对电解铝液直接生产6063铝合金组织的影响. 《机械设计与制造》.
320. 赵梓皓，许晓静，周海，朱新董（2010）. 多对轮驱动的CECA大应变技术的模拟. 《热加工工艺》.
321. Honghong Shao, Yu Chunhang, Xiaojing Xu, Ji Wang, Rui Zhai, Xiaojing Wang (2010). Influence of Ti nanocrystallization on microstructure, interface bonding, surface energy and blood compatibility of surface TiO2 films. Applied Surface Science.DOI
322. 许晓静，夏登福，卓刘成，郝欣妮，宗亮（2009）. 镁合金表面磁控溅射DLC/SiC薄膜的纳米压痕与摩擦磨损性能. 《稀有金属材料与工程》.
323. 夏登福，许晓静，卓刘成，郝欣妮，宗亮（2009）. 磁控溅射DLC/SiC/Ti多层膜对镁合金摩擦磨损性能的影响. 《航空材料学报》.
324. 程晓农，汝金明，莫纪平，许晓静（2009）. 固溶-大应变-后续热处理态AZ31镁合金的组织和性能. 《稀有金属材料与工程》.
325. 许晓静，夏登福，卓刘成，郝欣妮，宗亮（2009）. 镁合金表面磁控溅射SiC薄膜的摩擦磨损性能. 《江苏大学学报(自然科学版)》.
326. 许晓静，夏登福，卓刘成，郝欣妮，宗亮（2009）. 镁合金表面磁控溅射CNx/SiC/Ti多层膜的摩擦磨损性能. 《摩擦学学报(中英文)》.
327. 汪建敏，陆晋，李新城，程晓农，许晓静（2008）. 基于等通道角挤压工艺制备超细晶中碳钢. 《材料热处理学报》.DOI
328. 许晓静，卓刘成，郝欣妮，夏登福，陆树显，姜玉杰（2008）. 基材纳米晶体化对表面薄膜纳米压痕及膜基系统摩擦学行为的影响. 《2008年中国机械工程学会年会暨甘肃省学术年会文集》.
329. 汪建敏，周孔亢，陆晋，许晓静，姜银方（2008）. 层错能在剧烈剪切变形时对晶粒细化的影响. 《机械工程学报》.
330. Fei Zhou, Kangmin Chen, Meiling Wang, Xiaojing Xu, Hua Meng, Min Yu, Zhendong Dai (2008). Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air. Wear.DOI
331. Xiaojing Xu, Honghong Shao, Jianchang Gao, Kangmin Chen, Xiaonong Cheng (2008). Effect of SiC film on tensile properties of nanostructured Ti produced by compressive deformation at liquid-nitrogen temperature. Materials Science and Engineering A.DOI
332. 许晓静，王浩，姜玉杰，陆树显（2007）. 等通道转角变形提高板条马氏体钢强度的机理. 《2007中国钢铁年会》.
333. 许晓静，陆树显，姜玉杰，曹进琪（2007）. 钢、钛基材上火焰喷焊Ni基耐磨覆层的比较. 《材料热处理学报》.DOI
334. 许晓静，程晓农（2007）. 固溶-大变形-时效路线制备超高强度高塑性纳米结构铝合金. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会》.
335. 许晓静，卓刘成，陆树显，姜玉杰（2007）. 纳米结构钛673K氧化后的拉伸与摩擦性能. 《第六届中国功能材料及其应用学术会议论文集（5）》.
336. 许晓静，姜玉杰，陆树显，曹进琪，邵红红，高建昌（2007）. SiC薄膜对纳米结构Ti拉伸和摩擦性能的影响. 《稀有金属材料与工程》.
337. 张洁，许晓静，戴峰泽（2007）. 石墨对亚微米SiCp/Cu复合材料耐磨性能的影响. 《金属热处理》.
338. 王宏宇，许晓静，陈康敏，易东平（2007）. 镍基喷焊涂层与钛合金基体界面特征的研究. 《材料科学与工艺》.
339. 张洁，许晓静，戴峰泽（2007）. SiCp/Cu复合材料的真空钎焊. 《焊接学报》.
340. 许晓静，程晓农（2007）. 高强度、高应变速率超塑性铸锭铝合金AI-Cu-Mg-Ti-Sr. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会论文集》.
341. 陆晋，汪建敏，许晓静（2007）. SiCp尺寸及含量对SiCp/Cu基复合材料电学和力学性能的影响. 《热加工工艺》.
342. 程晓农，宋刚，莫纪平，徐红星，许晓静（2007）. 强化固溶态2024铝合金ECAP加工后的拉伸性能. 《江苏大学学报(自然科学版)》.
343. 许晓静（2007）. 纳米结构Ti表面室温磁控溅射SiC/CNx薄膜的结构与摩擦学性能. 《第八届全国真空冶金与表面工程学术会议论文摘要集》.
344. Xiaojing Xu, Jinqi Cao (2007). A Simulation and Study on Strain Uniformity of Equal Channel Angular Pressing. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
345. Xiaojing Xu, Xuefeng Zhang, Jinqi Cao, Kangmin Chen, Li Pan (2007). Tensile Properties and Dislocation Strengthening of CP-Ti Processed by Equal-Channel Angular Pressing at 723K. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
346. Xiaojing Xu (2007). Tensile properties of 2024 Al alloy processed by enhanced solid-solution and subsequent equal-channel angular pressing. Journal of Jiangsu University.
347. Xiaojing Xu (2007). Effect of SiC_p Size and Content on Electrical and Mechanical Properties of SiC_p/Cu Matrix Composite. Rejiagong gongyi.
348. 许晓静，张雪峰，曹进琪，汪建敏，蒋维平（2006）. 常规固溶态2024铝合金ECAP加工后的拉伸性能. 《稀有金属材料与工程》.
349. 戈晓岚，许晓静，张洁，居志兰（2006）. 亚微米SiCp/Al复合材料的磨损性能. 《江苏大学学报(自然科学版)》.
350. 戈晓岚，许晓静，张洁（2006）. 亚微米SiCp增强Al基复合材料摩擦磨损性能研究. 《2006全国摩擦学学术会议论文集（一）》.
351. 戈晓岚，许晓静，张洁（2006）. 亚微米SiCP增强Al基复合材料摩擦磨损性能. 《复合材料学报》.
352. 汪建敏，陆晋，许晓静，姜银方，潘励（2006）. 中碳钢在等通道角挤压过程中的组织演化. 《中国机械工程》.
353. 王宏宇，许晓静，陈康敏，王兰（2006）. 中温回火对钛基体上镍基喷焊涂层组织和性能的影响. 《焊接学报》.
354. 许晓静，曹进琪，姜玉杰，陆树显，张雪峰（2006）. TA2在823K温度ECAP变形后的拉伸性能与位错强化. 《2006年全国功能材料学术年会专辑》.
355. Hongxin Xu, Xiaonong Cheng, Gang Song, J.P. Mo, Xiaojing Xu (2006). WITHDRAWN: Effect of Ecap on Mechanical properties of 2024 Al alloy. Materials Science and Engineering A.DOI
356. 王宏宇，许晓静，陈康敏，张雪峰，刘曦（2005）. La2O3对钛合金表面镍基喷焊涂层组织和性能的影响. 《中国稀土学报》.
357. 王伟，许晓静（2005）. 添加少量纳米SiCp对铜基材料电学和摩擦学性能的影响. 《机械工程材料》.
358. 王宏宇，刘桂林，吉平平，陈康敏，许晓静（2005）. 粉末冶金铝-铁合金的组织和性能. 《机械工程材料》.
359. 石凤健，汪建敏，许晓静（2005）. ECAP法制备超细晶铜的再结晶行为研究. 《热加工工艺》.
360. 戴峰泽，许晓静（2005）. 微米SiCp/Cu基复合材料的组织与性能. 《热加工工艺》.
361. 张洁，许晓静，蒋国永，白红祥（2005）. 1700精轧机组主传动SWC620万向接轴断裂分析. 《金属热处理》.
362. 王宏宇，陈康敏，许晓静，张雪峰，刘桂玲（2005）. 钛合金Ti-6Al-4V的磨损失效及其表面耐磨处理技术. 《轻金属》.
363. 王宏宇，许晓静，陈康敏，刘桂玲，徐文维（2005）. 钛合金表面镍基喷焊涂层的组织和耐磨行为. 《航空材料学报》.
364. 王宏宇，张雪峰，许晓静，刘曦，陈康敏，潘励（2005）. 喷焊工艺对钛基体镍基涂层显微组织和性能的影响. 《中国有色金属学报》.
365. 戈晓岚，许晓静，蔡兰，陈康敏，居志兰（2005）. SiCp含量和尺寸对Al基复合材料摩擦学特性的影响. 《中国有色金属学报》.
366. Xiaojing Xu (2005). Inflence of Addtion of a Small Amout of Ultrafine SiC_p on Electrical and Tribological Properties of Cu Matrix Materials. Materials for Mechanical Engineering.
367. Xiaojing Xu (2005). Study on Recrystallization Behavior of Ultra-fine Grain Copper Fabricated by Equal Channel Angular Pressing. Rejiagong gongyi.
368. Xiaojing Xu (2005). Microstructure and Properties of Al-Fe Alloys Made by Powder Metallurgy. Materials for Mechanical Engineering.
369. 王伟，许晓静（2004）. 亚微米SiCp含量对SiCp/Cu基复合材料性能的影响. 《热加工工艺》.
370. 汪建敏，许晓静，石凤健，姜银方，陈康敏（2004）. 等径角挤压获得超细晶铜的研究. 《热加工工艺》.
371. 居志兰，花国然，许晓静，戈晓岚（2004）. 粉末冶金Al-10%Ti复合材料的力学和耐磨性能. 《南通大学学报(自然科学版)》.
372. 居志兰，花国然，许晓静，戈晓岚（2004）. SiCp尺寸及含量对Al基复合材料磨损表层、亚表层形貌的影响. 《润滑与密封》.
373. 许晓静，徐海卫，张洁，汪建敏，刘忠德，程晓农，蔡兰（2004）. 铸锭铝合金Al-Cu-Mg-Ti高应变速率超塑性. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
374. 戴峰泽，许晓静，陈康敏，花世群，蔡兰（2004）. 微米SiCp/Cu基复合材料的机械和耐磨性能. 《农机化研究》.
375. 石凤健，汪建敏，许晓静（2003）. 等截面角形挤压的研究内容及现状. 《热加工工艺》.
376. 许晓静，戈晓岚（2003）. SiCW/Zn-22Al复合材料的超塑性. 《复合材料学报》.
377. 张洁，许晓静（2003）. 冷作模具用高速钢热处理性能和变形研究. 《模具工业》.
378. 许晓静，戈晓岚（2003）. SiC晶须增强铝基复合材料超塑性. 《复合材料学报》.
379. 居志兰，戈晓岚，许晓静（2003）. ECAP细化晶粒法的仿真与分析. 《材料科学与工程学报》.
380. 张洁，许晓静，陈康敏，吴晶，潘励，徐文维（2003）. SiCp尺寸对SiCp/Cu基复合材料抗磨性能的影响. 《摩擦学学报(中英文)》.DOI
381. 许晓静，陈康敏，戴峰泽，蔡兰（2002）. SiC p /LD2铝基复合材料的超塑性. 《江苏省机械工程学会第六次会员代表大会》.
382. 许晓静，陈康敏，戴峰泽，蔡 兰（2002）. SiCp增强2024铝基复合材料超塑性的研究. 《金属学报》.
383. 许晓静，王伟，蔡兰（2002）. SiCp/LD2铝基复合材料的超塑性. 《机械工程材料》.
384. 许晓静（2002）. SiCp/Al复合材料超塑性变形的断口特征. 《理化检验-物理分册》.
385. 居志兰，戈晓岚，许晓静（2002）. 块体纳米材料的研究现状与发展思路. 《江苏大学学报(自然科学版)》.
386. 韩韡，许晓静，刘延山（2002）. 硬质合金刀具材料的研究现状与发展思路. 《工具技术》.
387. 许晓静，王伟（2002）. 工业供应态LY12铝合金的超塑性. 《宇航材料工艺》.
388. 许晓静，蔡兰，戴峰泽（2001）. SiC晶须增强铝基复合材料超塑性的研究. 《2001年中国机械工程学会年会暨第九届全国特种加工学术年会》.
389. 许晓静（1999）. 微量液相与铝基复合材料的高应变速率超塑性. 《宇航材料工艺》.
390. 许晓静（1999）. 压力浸渗SiCW/LY12复合材料的超塑性. 《材料工程》.
391. 许晓静，张荻，施忠良，赵昌正，吴人洁（1999）. 挤压铸造铝基复合材料的高应变速率超塑性. 《中国有色金属学报》.
392. 许晓静（1999）. SiC晶须增强纯铝基复合材料的高应变速率超塑性. 《江苏大学学报(自然科学版)》.
393. 许晓静，张荻，施忠良，赵昌正，吴人洁（1999）. 冷轧态SiCp/LY12复合材料超塑性及变形机制. 《材料工程》.
394. 许晓静，赵昌正，吴人洁，张荻，施忠良（1998）. 铝基复合材料超塑性变形机制. 《机械工程材料》.
395. 许晓静，赵昌正，吴人洁，张荻，施忠良（1998）. 轧制与增强体对铝基复合材料超塑性的影响. 《宇航材料工艺》.

预印本

1. Xizhou Kai, Ruikun Chen, Yanjie Peng, Anjun Shi, Ran Tao, Xiangfeng Liang, Guirong Li, Gang Chen, Xiaojing Xu, Yutao Zhao (2022). Effects of In-Situ Zrb2 Nanoparticles and Rare Earth Sc on the Microstructure and Mechanical Property of 7n01 Aluminum Alloy. SSRN Electronic Journal.DOI