百晓学者学者目录

刘占生

哈尔滨工业大学能源科学与工程学院

个人简介

刘占生,哈尔滨工业大学能源科学与工程学院教授、博士生导师,研究方向为航空航天科学与工程、动力工程、工业通用技术及设备,长期从事转子动力学、轴承与密封、旋转机械振动及故障诊断相关研究。

精选作品

期刊论文

  1. 韩冰,刘占生,何鹏,颜培刚(2026). 不平衡扰动下裂纹转子振动特性试验. 《振动、测试与诊断》.DOI
  2. 王瑱珑,李斌,马瑞贤,廖明夫,张广辉,刘占生(2026). 大涵道比发动机模拟转子动力学设计与验证. 《节能技术》.
  3. 刘占生,杨宜顺,于树博,孙原理(2026). 环面与锥腔结构静压气体静平衡装置特性仿真与试验. 《振动工程学报》.
  4. Xi Kuang, Zhansheng Liu, Peng He (2026). Dynamic modeling of rotating disk-shaft systems considering flexible interfacial connection. International Journal of Mechanical Sciences.DOI
  5. 于香宇,刘占生,何鹏,齐金磊(2025). 航空发动机转子热弯曲变形及动力学试验研究. 《航空动力学报》.DOI
  6. 韩冰,刘占生,何鹏,颜培刚(2025). 不同裂纹参数下的转子系统振动特性试验. 《振动工程学报》.
  7. 刘占生,杨宜顺,于树博,孙原理(2025). 多种制造误差对静压气体静平衡装置的涡流力矩影响. 《润滑与密封》.
  8. Xi Kuang, Peng He, Zhansheng Liu, Wei Dou (2025). An Improved Isogeometric Rotation-Free Approach for Rotating Disk-Shaft Systems Considering the Removal of Outliers and FOP. Journal of Vibration Engineering & Technologies.DOI
  9. Shihao Li, Zhansheng Liu, Peng He, Daohui Lv (2025). Impacts of panel vibration and fluctuating backpressure on shock train behavior in scramjet isolators. Physics of Fluids.DOI
  10. Xi Kuang, Cosmin Anitescu, Peng He, Zhansheng Liu, Timon Rabczuk (2025). A hybrid-dimensional modeling method for the vibration of embedding 1D rotation-free beam into 3D solid under rotating scenarios. Engineering Analysis with Boundary Elements.DOI
  11. Zhansheng Liu, Jinlei Qi, Xiangyu Yu, Peng He, Wenjie Ji (2025). Condensation effects on the static performance of externally pressurized steam-lubricated thrust bearing. Physics of Fluids.DOI
  12. 韩冰,刘占生,何鹏,颜培刚(2024). 裂纹深度逐渐增加的转子动力学特性试验. 《航空动力学报》.
  13. Xi Kuang, Zhansheng Liu, Cosmin Anitescu, Timon Rabczuk (2024). An outliers-free isogeometric modeling method of rotating disk-shaft systems under elastic boundary conditions. Frontiers of Structural and Civil Engineering.DOI
  14. shubo yu, Zhansheng Liu, Saibo Wang, Gaorong Zhang (2024). A novel adaptive gramian angle field based intelligent fault diagnosis for motor rolling bearings. Journal of Physics Conference Series.DOI
  15. shubo yu, Zhansheng Liu, Gaorong Zhang, Saibo Wang (2024). Dynamic simulation-assisted Gaussian mixture alignment approach for fault diagnosis of rotation machinery under small samples. Measurement Science and Technology.DOI
  16. shubo yu, Zhansheng Liu, Saibo Wang, Gaorong Zhang (2024). A feature separation simulation-assisted transfer framework for rotating machinery fault intelligent diagnosis. Measurement Science and Technology.DOI
  17. shubo yu, Zhansheng Liu, Zhao Chen, Dongfang Lv (2024). A clustering multi-stage training transfer learning framework for cross simulation domain and experimental domain fault diagnosis. Measurement Science and Technology.DOI
  18. Peng Xia, Xiaofei Jin, Wenlong Song, Yangqiao Liang, Shicheng Xu, Jiabao Liu, Zhansheng Liu, Wensheng Ma (2024). A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  19. Jianan Guo, Yingzan Wang, Xingwei Zhang, Sheng Wei Cao, Zhansheng Liu (2024). Dynamic characteristic of rudder loop with rough revolute joint clearance. Nonlinear Dynamics.DOI
  20. Bing Han, Zhansheng Liu, Peng He, Peigang Yan (2023). Rotor crack breathing under unbalanced disturbance. Journal of Sound and Vibration.DOI
  21. Zhansheng Liu, Jinlei Qi, Xiangyu Yu, Peng He, Bing Han, Yishun Yang, Jiaqi Wang (2023). Effects of Relief Hole on the Static Characteristics of Externally Pressurized Steam-Lubricated Hybrid Journal-Thrust Bearing. Mechanisms and machine science.DOI
  22. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang, Wei-Bin Yang (2023). Comprehensive hydraulic performance improvement in a pump-turbine: An experimental investigation. Energy.DOI
  23. Zhansheng Liu, Jinlei Qi, Xiangyu Yu (2023). Effects of Conical Cavity on the Load Capacity of Externally Pressurized Steam-Lubricated Journal Bearing.DOI
  24. Bing Han, Peigang Yan, Zhansheng Liu, Peng He (2023). Interference of Unbalance on the Dynamic Characteristics of Cracked Rotor: An Experimental Research.DOI
  25. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang, Yongjian Song (2023). Optimization on high-pressure side of pump-turbine runner based on high efficiency and stability criterion via multi-objective genetic algorithm method. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
  26. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang (2023). Mechanism of runner high-pressure side on stall characteristics at typical unsteady operating points in both modes of a pump turbine. Physics of Fluids.DOI
  27. 徐科繁,冯磊,张广辉,刘占生(2022). 考虑滑移效应的织构化气体箔片轴承静特性分析. 《第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛论文集(第五册)》.DOI
  28. 李锋,周婕群,拜云山,刘占生,李明海(2022). 小孔节流动静压混合式浮动环密封承载与泄漏特性分析. 《推进技术》.
  29. 庄乾才,王红海,马德鹏,黄延忠,刘占生(2022). 汽轮机转子轮盘加工跳动量引起的振动特性研究. 《汽轮机技术》.
  30. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang (2022). Investigation on the relationship between hydraulic loss and vortex evolution in pump mode of a pump-turbine. Journal of Hydrodynamics.DOI
  31. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang (2022). Investigation on hydraulic loss component and distribution in hydraulic machinery: A case study of pump-turbine in pump mode. Journal of Energy Storage.DOI
  32. Yonglin Qin, Deyou Li, Hongjie Wang, Zhansheng Liu, Xianzhu Wei, Xiaohang Wang (2022). Multi-objective optimization design on high pressure side of a pump-turbine runner with high efficiency. Renewable Energy.DOI
  33. Ruixian Ma, Jiangbo Huang, Zhansheng Liu, Mingfu Liao (2022). Effects of Flat-Plate Extension of Trailing Edge on Noise Generation for NACA 0012 Airfoil at Moderate Reynolds Numbers Using Direct Noise Simulations. AIAA/CEAS Aeroacoustics Conference.DOI
  34. 徐科繁,张广辉,刘占生,刘勋(2021). 燃气轮机滚动轴承故障及振动传递特性研究. 《热能动力工程》.DOI
  35. 冯永志,孟凡刚,黄延忠,何鹏,刘占生(2021). 重型燃气轮机转子启动过程热弯曲故障实验研究. 《节能技术》.
  36. 孟凡刚,黄延忠,冯永志,刘占生(2021). 重型燃气轮机转子不对中故障动力学数值仿真研究. 《热能动力工程》.DOI
  37. 马瑞贤,王术光,廖明夫,刘占生(2021). 高速涡轮机转子-轴承内摩擦振动实验研究. 《第十四届全国振动理论及应用学术会议(NVTA2021)摘要集》.DOI
  38. 梁波,罗欣洋,宁家强,程定斌,徐科繁,张广辉,刘占生(2021). 基于三维有限元波箔片模型的气体箔片轴承承载性能研究. 《节能技术》.
  39. Xiaofei Jin, Peng Xia, Zhansheng Liu, Wensheng Ma, Pu Zhang, Yangqiao Liang (2021). Thermo-hybrid lubrication FSI-CFD model for the static characteristics of hybrid porous tilting pad bearings. Tribology International.DOI
  40. Ruixian Ma, Zhaoyuan Guo, Zhansheng Liu, Mingfu Liao (2021). Experimental Study on Internal Friction Induced Vibrations of a High-Speed Turbine Rotor-Bearing System. Lecture notes in electrical engineering.DOI
  41. 孟凡刚,冯永志,于宁,刘占生(2020). 燃气轮机典型故障统计分析及运行维护. 《电气时代》.
  42. 马瑞贤,刘占生,吴桂华,张广辉,何鹏(2020). 考虑任意来流方向的运动力源辐射声压解析式. 《船舶力学》.
  43. 王震林,刘占生,徐宁,王维强(2020). 基于双向流固耦合弹性环式挤压油膜阻尼器建模及动力学特性研究. 《汽轮机技术》.
  44. Peng He, Zhaohua Zhou, Jigang Feng, Xiangyu Yu, Zhansheng Liu (2020). Prediction of the thermal bow of rotor based on the measured displacement and temperature. International Journal of Distributed Sensor Networks.DOI
  45. Weigang Wang, Fengchao Yuan, Zhansheng Liu (2020). Sparsity discriminant preserving projection for machinery fault diagnosis. Measurement.DOI
  46. Xiangyu Yu, Zhansheng Liu, Zhaohua Zhou, Jigang Feng, Peng He (2020). Experimental Research on the Characteristics of Thermal Bow in an Aeroengine HP Spool.DOI
  47. Guanghui Zhang, Shubo Yu, Zhansheng Liu, Kefan Xu, Yu Li (2020). The Thermo-Hydrodynamic Analysis of the Plain Journal Bearing With Centered Circumferential Groove: Numerical Simulation vs. Experiment.DOI
  48. Ruixian Ma, Zhansheng Liu, Guanghui Zhang, Con J. Doolan, Danielle Moreau (2020). Acoustic analysis of a forced-oscillating cylinder in flow using a hybrid method. Aerospace Science and Technology.DOI
  49. 夏鹏,宣统,周泽新,刘占生(2019). 浮动环密封自锁位置的试验研究. 《推进技术》.
  50. 王震林,徐宁,刘占生,王维强(2019). 弹性环式挤压油膜阻尼器动力学特性系数测试. 《航空动力学报》.DOI
  51. 王震林,刘占生,张广辉,周泽新(2019). 基于厚板的弹性环式挤压油膜阻尼器建模及动力学特性系数识别. 《航空动力学报》.DOI
  52. 王维刚,陶京,刘占生(2019). 基于半监督最大间隔字典学习的故障诊断方法. 《振动、测试与诊断》.DOI
  53. 马瑞贤,刘占生,陈晖,张广辉,何鹏(2019). 线性化欧拉拟特征方程模拟圆柱绕流声场方法. 《哈尔滨工程大学学报》.
  54. 郭嘉楠,何鹏,黄洪雁,刘占生,黄玉平,丁伟涛(2019). 行星滚柱丝杠副刚度特性分析及试验验证. 《哈尔滨工程大学学报》.
  55. Peng He, Jiaxin Liu, Chengyuan Zhang, Zhansheng Liu (2019). Analytical modeling of axial stiffness of tensile bolted joints under concentric external load. Journal of Mechanical Science and Technology.DOI
  56. Ruixian Ma, Zhansheng Liu, Guanghui Zhang, Con J. Doolan, Danielle Moreau (2019). Control of Aeolian tones from a circular cylinder using forced oscillation. Aerospace Science and Technology.DOI
  57. Zhenlin Wang, Zhansheng Liu, Guanghui Zhang (2019). Dynamic characteristics of elastic ring squeeze film damper. Industrial Lubrication and Tribology.DOI
  58. Ruixian Ma, Zhansheng Liu, Con J. Doolan, Danielle Moreau, Michał Leszek Czarnecki (2019). Hybrid Artificial Boundary Conditions for the Application of Blunt-Body Aerodynamic Noise Prediction. Archives of Acoustics.DOI
  59. Jianan Guo, Peng He, Zhansheng Liu, Hongyan Huang (2019). Investigation of an improved planar revolute clearance joint contact model with rough surface. Tribology International.DOI
  60. Peng Xia, Hui Chen, Zhansheng Liu, Wensheng Ma, Baofeng Yang (2019). Analysis of whirling motion for the dynamic system of floating ring seal and rotor. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  61. Peng He, Zhiqiang Fan, Xiangyu Yu, Zhansheng Liu (2019). Influence of the axial position of the external load on the mechanical behavior of the bolted lap joint with different materials. Mechanics & Industry.DOI
  62. 欧阳运芳,何鹏,刘占生(2018). 基于有限元仿真的航空发动机振动传感器布局优化方法研究. 《汽轮机技术》.
  63. 闫佳佳,刘占生,张广辉,李豫,徐亮(2018). 平箔片厚度轴向变化的新型箔片轴承性能. 《哈尔滨工业大学学报》.
  64. 郭嘉楠,何鹏,黄洪雁,刘占生,黄玉平,丁伟涛(2018). 行星滚柱丝杠动力学特性分析及试验研究. 《推进技术》.
  65. 李锋,刘占生,李明海,夏鹏,何鹏(2018). 非零压差边界下间隙流动雷诺方程近似解析解. 《航空动力学报》.
  66. 王凤森,王泽钦,刘占生(2018). 温度梯度对航空发动机转子热弯曲的影响分析. 《汽轮机技术》.
  67. 李亚政,王峥,孙亚非,张广辉,黄洪雁,刘占生(2018). 基于损伤力学和XFEM的舰船蒸汽轮机叶片裂纹扩展研究. 《船舶力学》.
  68. Zhenxing Liu, Yanming Wei, Lei Chen, Zhansheng Liu, Xianghe Wang (2018). Simulation of oil whirl for geared rotor journal bearing system. Journal of Physics Conference Series.DOI
  69. Fangcheng Xu, Yi Sun, Guanghui Zhang, Zhansheng Liu (2018). Effect of bump structural friction on the performance of bump foil bearing and rotor dynamic behavior: Experimental study. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  70. Lei Hou, Huizheng Chen, Yushu Chen, Kuan Lu, Zhansheng Liu (2018). Bifurcation and stability analysis of a nonlinear rotor system subjected to constant excitation and rub-impact. Mechanical Systems and Signal Processing.DOI
  71. Jiajia Yan, Zhansheng Liu, Guanghui Zhang, Xiangyu Yu, Liang Xu (2018). Feasibility study of a turbocharger rotor supported by air foil bearings with diameter of 17 mm focusing on rotordynamic performance. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
  72. Peng Xia, Zhansheng Liu, Xiangyu Yu, Jingming Zhao (2018). A transient bulk flow model with circular whirl motion for rotordynamic coefficients of annular seals. Chinese Journal of Aeronautics.DOI
  73. 夏鹏,王祥和,刘占生,温健全(2017). CFD优化火箭涡轮泵间隙密封静动态特性计算模型. 《推进技术》.
  74. 徐宁,王庆超,王震林,刘占生(2017). 考虑接触热阻的非连续转子快速启动热分析. 《航空动力学报》.
  75. 夏鹏,刘占生(2017). 浮环密封结构弹性对间隙泄漏量和动力学系数的影响. 《推进技术》.
  76. 闫佳佳,刘占生,王铮,高佳颖(2017). 基于Newton-Raphson迭代的动压气体止推箔片轴承特性研究. 《汽轮机技术》.
  77. Jiajia Yan, Guanghui Zhang, Zhansheng Liu, Jingming Zhao, Liang Xu (2017). Performance of a novel foil journal bearing with surface micro-grooved top foil. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  78. Jianan Guo, Peng He, Hongyan Huang, Zhansheng Liu, Yuping Huang, Weitao Ding (2017). Analytical and experimental of planetary roller screw axial stiffness. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
  79. Peng Xia, Zhansheng Liu, Jiajia Yan, Guanghui Zhang (2017). Lock-up characteristics of floating ring seals considering rotor whirling motion. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  80. Zhenlin Wang, Ning Xu, Xiangyu Yu, Zhansheng Liu, GuangHui Zhang (2017). The Dynamic Characteristic Analysis of Elastic Ring Squeeze Film Damper by Fluid-Structure Interaction Approach.DOI
  81. Peng Xia, Guanghui Zhang, Jingming Zhao, Zhansheng Liu (2017). Investigations on Rotordynamic Characteristics of a Floating Ring Seal Considering Structural Elasticity.DOI
  82. Cheng Yao, Guanghui Zhang, Zhansheng Liu (2017). Forced Shock Oscillation Control in Supersonic Intake Using Fluid–Structure Interaction. AIAA Journal.DOI
  83. Lei Hou, Yushu Chen, Yiqiang Fu, Huizheng Chen, Zhenyong Lu, Zhansheng Liu (2017). Application of the HB–AFT method to the primary resonance analysis of a dual-rotor system. Nonlinear Dynamics.DOI
  84. 姚程,张广辉,刘占生(2016). 背压脉动引起的超声速进气道流固耦合振动分析. 《推进技术》.
  85. 赵辛午,黄洪雁,马瑞贤,刘占生(2016). 基于流道优化的局部进气高速涡轮机气动噪声控制实验研究. 《推进技术》.
  86. 闫佳佳,刘占生,张广辉,韦继勤(2016). 考虑稀薄气体效应的止推箔片轴承静特性分析. 《航空动力学报》.
  87. 徐方程,刘占生,张广辉,张雯,孙毅(2016). 气体止推箔片轴承试验台设计及试验. 《航空动力学报》.
  88. 徐方程,张广辉,孙毅,刘占生,张雯(2016). 平箔片楔形高度对气体止推箔片轴承特性影响. 《航空动力学报》.
  89. 徐宁,王庆超,刘占生(2016). 涡轮转子起动温升曲线优化及试验研究. 《机械工程学报》.
  90. 叶振环,刘占生,王黎钦(2016). 基于疲劳寿命的角接触球轴承结构参数优化分析. 《机械传动》.
  91. 张敏,张广辉,刘占生(2016). 大型船舶推进轴系校中多点非线性弹性支承模型研究. 《船舶力学》.
  92. 徐宁,王庆超,刘占生,杨帆(2016). 基于热弹耦合的涡轮转子瞬态热冲击研究. 《哈尔滨工程大学学报》.
  93. Zhenxing Liu, Zhenxing Liu, Zhansheng Liu, Zhansheng Liu, Yu Li, Guanghui Zhang (2016). Dynamics response of an on-board rotor supported on modified oil-film force considering base motion. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  94. Zhenhuan Ye, Zhansheng Liu, Liqin Wang (2016). CALCULATION OF ADDITIONAL AXIAL FORCE OF ANGULAR-CONTACT BALL BEARINGS IN ROTOR SYSTEM. Transactions of the Canadian Society for Mechanical Engineering.DOI
  95. Zhenxing Liu, Zhenxing Liu, Zhansheng Liu, Zhansheng Liu, Jingming Zhao, Guanghui Zhang (2016). Study on interactions between tooth backlash and journal bearing clearance nonlinearity in spur gear pair system. Mechanism and Machine Theory.DOI
  96. Zhenlin Wang, Guanghui Zhang, Jian-quan Wen, Zhansheng Liu (2016). Numerical modeling of the flow in the squeeze film dampers with oil feed groove by computational fluid dynamic analysis. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  97. Guanghui Zhang, Qiang Ke Chen, Jiajia Yan, Xianghe Wang, Zhansheng Liu, Fangcheng Xu (2016). Theoretical Analysis and Numerical Simulation of Oil Lubricated Foil Bearing With Elastic Supported Bump Foil Structure.DOI
  98. Zhansheng Liu (2016). Study on Noise Reduction Mechanism of Flow Induced Noise for Flexible Body Based on Fluid-structure Interaction. Journal of Mechanical Engineering.DOI
  99. 姚程,张广辉,刘占生(2015). 跨声速扩压器弹性壁板流固耦合振动研究. 《推进技术》.
  100. 徐宁,刘占生,董延阳,王震林,王庆超(2015). 接触特性对非连续性转子热致振动的影响. 《航空动力学报》.
  101. 徐宁,刘占生,王庆超(2015). 基于舰船发动机转子热应力的快速启动优化. 《船舶力学》.
  102. 叶振环,刘占生,王黎钦(2015). 转子耦合效应对高速角接触球轴承振动的影响分析. 《机械传动》.
  103. 叶振环,刘占生,王黎钦(2015). 套圈转动方式对角接触球轴承动力学性能的影响. 《轴承》.
  104. 徐宁,刘占生,董延阳,杨帆,王庆超(2015). 转子热致振动现象的瞬态响应特性研究. 《振动与冲击》.
  105. 叶振环,刘占生,王黎钦(2015). 高速角接触球轴承保持架结构参数优化分析. 《煤矿机械》.
  106. Cheng Yao, Guanghui Zhang, Fangcheng Xu, Zhansheng Liu (2015). Influence of Wall Vibration on the Aero Performance of Transonic Diffuser. AIAA Computational Fluid Dynamics Conference.DOI
  107. Jiajia Yan, Guanghui Zhang, Zhansheng Liu, Fan Yang (2015). Static Characteristics of Gas Foil Thrust Bearing Based on Gas Rarefaction Model.DOI
  108. Peng He, Ning Xu, Zhansheng Liu (2015). Influence of Temperature Distribution on Tighten Force in Tie-Bolt Fastened Rotor With Considering Thermal Contact Conductance.DOI
  109. Cheng Yao, Zhansheng Liu, Jiajia Yan, Guanghui Zhang (2015). Aeroelastic Analysis of Supersonic Intake Under Downstream Perturbation.DOI
  110. Ruixian Ma, Guanghui Zhang, Zhansheng Liu, Dian-lai Li (2015). Numerical Study on Flow Characteristics and Flow Induced Noise of Flexible NACA0018 Airfoil.DOI
  111. Weigang Wang, Zhansheng Liu (2015). Classification of time–frequency images based on locality-constrained linear coding optimization model for rotating machinery fault diagnosis. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  112. Yongliang Wang, Yu Zhou Gao, Ying Cui, Zhansheng Liu (2015). Establishment of Approximate Analytical Model of Oil Film Force for Finite Length Tilting Pad Journal Bearings. International Journal of Rotating Machinery.DOI
  113. Deyou Li, Ruzhi Gong, Hongjie Wang, Xianzhu Wei, Zhansheng Liu, Daqing Qin (2015). Numerical investigation on transient flow of a high head low specific speed pump-turbine in pump mode. Journal of Renewable and Sustainable Energy.DOI
  114. Deyou Li, Ruzhi Gong, Hongjie Wang, Gaoming Xiang, Xianzhu Wei, Zhansheng Liu (2015). Dynamic analysis on pressure fluctuation in vaneless region of a pump turbine. Science China Technological Sciences.DOI
  115. 亢维佳,刘占生,卢江波,王羽,张广辉(2014). 转子涡动对旋转冲压转子进气道起动及性能的影响. 《推进技术》.
  116. 徐方程,刘占生,张雯,马瑞贤,王羽(2014). 箔片摩擦效应对转子-箔片轴承系统动力学特性影响试验. 《航空动力学报》.
  117. 徐方程,刘占生,张广辉,马瑞贤(2014). 基于库伦摩擦效应的箔片轴承极限承载力理论与试验. 《航空动力学报》.
  118. 徐方程,刘占生,马瑞贤,黄飞淋(2014). 波箔型径向气体箔片轴承-转子系统升降速动态特性试验. 《航空动力学报》.
  119. 刘占生,曹智选,沈勇,欧阳运芳,张广辉(2014). 某型涡轴发动机气路故障数值仿真. 《振动、测试与诊断》.
  120. 何鹏,刘占生,黄飞淋,刘镇星(2014). 拉杆转子临界转速随拉紧力变化规律试验. 《振动、测试与诊断》.
  121. Fangcheng Xu, Guanghui Zhang, Yi Sun, Zhansheng Liu, Yu Hao Wang, Ning Xu (2014). The Effect of Coulomb Friction in Foil Structure on the Static and Dynamic Performance of Bump Foil Journal Bearings.DOI
  122. Ning Xu, Zhansheng Liu, Peng He (2014). Transient Thermal Stress Analysis of the Typical Structures in Turbine Rotor Based on Thermomechanical Analysis.DOI
  123. Cheng Yao, Zhansheng Liu, Jiqin Wei, Shiyun Qu, Guanghui Zhang (2014). Effect of Wall Deformation on Aerodynamic Performance for Mixed Compression Intake. AIAA Fluid Dynamics Conference.DOI
  124. Weijia Kang, Zhansheng Liu, Yu Wang, Yanyang Dong, Yong Xiong Sun (2014). A Numerical Study on the Effect of Bleed System on Starting Ability and Flow Performance of Rampressor Inlet. Journal of Engineering for Gas Turbines and Power.DOI
  125. Guanghui Zhang, Xie Liang, Yu Wang, Zhansheng Liu (2014). Performance Analysis of Oil Lubricated Foil Bearing With Flexible Supported Back Spring Structure—Part I: Model Development and Numerical Investigation. Journal of Engineering for Gas Turbines and Power.DOI
  126. Guanghui Zhang, Xie Liang, Yu Wang, Zhansheng Liu (2014). Performance Analysis of Oil Lubricated Foil Bearing With Flexible Supported Back Spring Structure—Part II: Comparison of Predictions and Measured Test Data. Journal of Engineering for Gas Turbines and Power.DOI
  127. Weijia Kang, Zhansheng Liu, Jiangbo Lu, Yu Wang, Yanyang Dong (2014). A Numerical Study for Flow Excitation and Performance of Rampressor Inlet considering Rotor Motion. Shock and Vibration.DOI
  128. 窦唯,褚宝鑫,刘占生(2013). 轴承支承总刚度对液体火箭发动机涡轮泵转子系统稳定性影响研究. 《推进技术》.
  129. 亢维佳,刘占生,张广辉,马瑞贤(2013). 背压脉动作用下旋转冲压转子进气道流场激励特性. 《推进技术》.
  130. 钱大帅,刘占生,王乐,解亮(2013). 干摩擦对称黏滑响应的级数解及黏滑边界特性. 《航空动力学报》.
  131. 胡丽国,张广辉,解亮,刘占生,闫佳佳,徐方程(2013). 油润滑弹性支撑多叶箔片轴承静态特性. 《航空动力学报》.
  132. 徐方程,刘占生,张广辉,黄飞淋(2013). 箔片结构库伦摩擦效应对径向箔片轴承特性的影响. 《航空动力学报》.
  133. 徐方程,刘占生,马瑞贤,闫佳佳(2013). 箔片摩擦对波箔型径向气体轴承静刚度和悬浮转速影响实验. 《航空动力学报》.
  134. 窦唯,刘占生(2013). 液体火箭发动机涡轮泵轴承支承刚度及轴向位置对转子系统临界转速的影响. 《导弹与航天运载技术(中英文)》.
  135. 窦唯,刘占生(2013). 流体激振力对高速泵转子振动特性的影响研究. 《机械科学与技术》.
  136. 王维刚,刘占生(2013). 多目标粒子群优化的支持向量机及其在齿轮故障诊断中的应用. 《振动工程学报》.
  137. 张广辉,胡丽国,解亮,刘占生,马瑞贤(2013). 弹簧支撑多叶油润滑箔片轴承动态特性研究. 《振动工程学报》.
  138. Guanghui Zhang, Guilong Wang, Zhansheng Liu, Ruixian Ma (2013). Stability Characteristics of Steam Turbine Rotor Seal System With Analytical Floating Ring Seal Force Model.DOI
  139. Yao Cheng, Zhansheng Liu, Ruixian Ma, Guanghui Zhang (2013). Numerical Vibration Analysis of Supersonic Mixed-Compression Intake.DOI
  140. Min Zhang, Guanghui Zhang, Zhansheng Liu (2013). Study on Dynamic Characteristics of Large Ship Rotor-Bearing System Based on an Advanced Water-Lubricated Rubber Bearing Model.DOI
  141. Liguo Hu, Guanghui Zhang, Zhansheng Liu, Ruixian Ma, Yu Wang, Jinfeng Zhang (2013). Performance analysis of multi-leaf oil lubricated foil bearing. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  142. Peng He, Zhansheng Liu, Feilin Huang, Ruixian Ma (2013). A study of elastic–plastic contact of statistical rough surfaces. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  143. Peng He, Zhansheng Liu, Chun Li (2013). An Improved Beam Element for Beams with Variable Axial Parameters. Shock and Vibration.DOI
  144. Zhansheng Liu (2013). Effects of Bearing Supporting Stiffness on Dynamic Stability of Turbopump Rotor System in Liquid Rocket Engine. Journal of Propulsion Technology.
  145. 窦唯,刘占生(2012). 液体火箭发动机涡轮泵转子弯扭耦合振动研究. 《火箭推进》.
  146. 张颖,苏宪章,刘占生,王维刚(2012). 旋转机械参数图形软形态学自适应边缘检测. 《哈尔滨工业大学学报》.
  147. 赵广,刘盼年,于贺春,马文琦,崔颖,刘占生(2012). 静压气体轴承气膜力及其与转子耦合动力学特性研究. 《航空动力学报》.
  148. 王永亮,刘占生,钱大帅,何鹏(2012). 有限长椭圆瓦轴承油膜力近似解析模型. 《航空动力学报》.
  149. 刘占生,徐方程,张广辉,曹智选(2012). 基于二维厚板模型的波箔片轴承静特性. 《航空动力学报》.
  150. 钱大帅,刘占生(2012). 基于线性互补原理的干摩擦振动系统非光滑数值算法. 《振动工程学报》.
  151. 张宏涛,顾忠华,王祥锋,韩万金,刘占生(2012). 薄叶气封流场结构与密封、扭矩特性的数值研究. 《汽轮机技术》.
  152. 王维刚,刘占生,倪红梅(2012). 求解混合变量约束优化问题的改进粒子群算法. 《系统仿真学报》.DOI
  153. 刘树鹏,刘占生(2012). 干摩擦隔振器隔振特性的研究. 《机械制造》.
  154. 窦唯,刘占生(2012). 高速离心泵隔舌对流体激振力的影响研究. 《振动工程学报》.
  155. Fangcheng Xu, Zhansheng Liu, Guanghui Zhang, Zhixuan Cao (2012). Effects of shear stiffness in top foil structure on gas foil bearing performance based on thick plate theory. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  156. Guanghui Zhang, Zhenxing Liu, Weijia Kang, Zhansheng Liu, Tian Xin (2012). Nonlinear dynamic characteristics of rotating ramjet rotor supported by hybrid gas bearing. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
  157. Guanghui Zhang, Shupeng Liu, Zhixuan Cao, Ruixian Ma, Zhansheng Liu (2012). Analytical model of self-acting journal bearing subjected to base excitation for marine engine system. Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment.DOI
  158. Peng He, Zhansheng Liu, Guanghui Zhang (2012). A study of overall contact behavior of an elastic perfectly plastic hemisphere and a rigid plane. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  159. Donghua Wang, Wanyou Li, Zhigang Liu, Zhansheng Liu (2012). Constrained Optimization of a Rotor-Bearing System Based on an Evolutionary Algorithm.DOI
  160. Yahui Cui, Zhansheng Liu, Yongliang Wang, YE Jianhuai (2012). Nonlinear Dynamic of a Geared Rotor System With Nonlinear Oil Film Force and Nonlinear Mesh Force. Journal of vibration and acoustics.DOI
  161. Ying Cui, Zhansheng Liu, Daren Yu, Yanfeng Duan (2012). Establishment of Nonlinear Dynamic Model for Prediction of Rotordynamic Instability of Steam Turbine Rotor-Bearing System Caused by Partial Admission. Journal of Engineering for Gas Turbines and Power.DOI
  162. Zhansheng Liu (2012). Non-smooth numerical algorithm for vibration system with dry friction based on linear complementarity principle.
  163. Zhansheng Liu (2012). A fault diagnosis method based on graphic recognition for rotating machinery. Zhendong yu chongji.
  164. Zhansheng Liu (2012). Oil Film Whirl Dynamic Characteristics and Influence Factors in High Speed Rotor-bearing System. Noise and Vibration Control.
  165. Zhansheng Liu (2012). Research on gas film force of aerostatic gas bearing and its coupled dynamics with rotor. Journal of Aerospace Power.
  166. Weijia Kang, Zhansheng Liu, Zhixuan Cao, Le Wang, Gangwei Wang (2012). Numerical Research on Flow Characteristics of Inlet Flow-Path for Ram-Rotor.DOI
  167. 王永亮,刘占生,钱大帅(2011). 可倾瓦轴承瓦块摆动特性. 《哈尔滨工业大学学报》.
  168. 窦唯,刘占生(2011). 液体火箭发动机涡轮泵故障诊断的新方法. 《推进技术》.
  169. 周鸿儒,顾忠华,韩万金,刘占生(2011). 气冷涡轮叶栅流场计算方法及其应用. 《热能动力工程》.
  170. 周鸿儒,顾忠华,韩万金,刘占生(2011). 气冷涡轮级气热耦合非定常数值模拟. 《热能动力工程》.
  171. 许怀锦,刘占生,吕伟剑,李华峰(2011). 气体润滑弹性波箔片轴承动态特性分析. 《航空动力学报》.
  172. 王永亮,刘占生(2011). 圆瓦滑动轴承油膜力近似解析模型. 《中国电机工程学报》.
  173. 张楠,吴乃军,刘占生,姜兴渭(2011). 高速转子-轴承系统油膜涡动故障仿真研究. 《机械科学与技术》.
  174. 丁春华,常山,刘占生,张广辉(2011). 大转矩弹性橡胶联轴器高频减振特性分析. 《机械传动》.
  175. 王东华,刘占生 (2011). A new evolutionary algorithm for constrained optimization problems. Journal of Harbin Institute of Technology(New series).
  176. Guanghui Zhang, Yi Sun, Zhansheng Liu, Min Zhang, Jiajia Yan (2011). Dynamic characteristics of self-acting gas bearing–flexible rotor coupling system based on the forecasting orbit method. Nonlinear Dynamics.DOI
  177. Yongliang Wang, Zhansheng Liu (2011). Study on tilting characteristic of pads in tilting pad bearing.DOI
  178. Guang Zhao, Yang Yu, Shupei Gao, Tao Sun, Zhansheng Liu (2011). Study on Dynamic Misalignment of Coupled Rotor- Coupling-Isolator System in Marine Power Plant. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
  179. Fangcheng Xu, Zhansheng Liu, Guanghui Zhang, Xie Liang (2011). Hydrodynamic Analysis of Compliant Foil Bearings With Modified Top Foil Model.DOI
  180. Zhansheng Liu (2011). Dynamics of rotor-gear coupling-bearing system with misalignment. Dalian Ligong Daxue xuebao.
  181. Peng He, Zhansheng Liu, Wang Guilong, Min Zhang (2011). Rotor Dynamic Analysis of Tie-Bolt Fastened Rotor Based on Elastic-Plastic Contact.DOI
  182. Dashuai Qian, Zhansheng Liu, Jiajia Yan, Liquan Sun, Yongliang Wang (2011). Numerical and Experimental Research on Periodic Solution Stability of Inclined Rotor Journal Bearing System.DOI
  183. Guanghui Zhang, Zhansheng Liu, Guilong Wang, Jiajia Yan (2011). Analytical Forces Parameters Identification of Hybrid Journal Gas Bearing Based on Transfer Function.DOI
  184. Zhansheng Liu (2011). Approximate Analytical Model of Oil-film Force for Cylindrical Journal Bearing. Proceedings of the CSEE.
  185. Zhansheng Liu (2011). Performance Analysis of Membrane Restrictor Hybrid Journal Gas Bearings.
  186. 张金锋,刘占生,解亮(2010). 某燃气轮机齿轮减速发电机组动力学特性分析. 《第9届全国转子动力学学术讨论会ROTDYN'2010论文集》.
  187. 张广辉,刘占生(2010). 径向气体轴承-柔性转子耦合系统动力学研究. 《航空动力学报》.
  188. 周鸿儒,王振峰,颜培刚,刘占生(2010). 具有转捩流动特性的高压燃气气冷涡轮叶栅的气热耦合计算. 《航空动力学报》.
  189. Yongliang Wang, Zhansheng Liu, Guanghui Zhang, Liquan Sun (2010). Theoretical and Experimental Study on Stability of Rotor System With Cylindrical Bearing and Elliptical Bearing.DOI
  190. Ying Zhang, Xianzhang Su, Zhansheng Liu (2010). A multi-structuring elements edge detection method based on gray-scale morphology of parameter image for rotating machinery. International Congress on Image and Signal Processing (CISP).DOI
  191. Daren Yu, Yanfeng Duan, Jinfu Liu, Zhansheng Liu, Qinghua Hu (2010). Experimental Study on Fault Caused by Partial Arc Steam Forces and Its Economic Solution. Journal of Engineering for Gas Turbines and Power.DOI
  192. Zhansheng Liu (2010). Dynamic study of journal gas bearings-flexible rotor coupling system. Journal of Aerospace Power.
  193. Zhansheng Liu (2010). Conjugate heat transfer simulation of a high pressure air-cooled gas turbine with transition flow characteristics. Journal of Aerospace Power.
  194. 刘占生,许怀锦,张广辉,王永亮(2009). 箔片预变形对箔片气体径向轴承静特性影响分析. 《航空动力学报》.
  195. 张广辉,刘占生(2009). 旋转冲压发动机高速动静混合气体轴承性能分析. 《推进技术》.
  196. 刘占生,许怀锦,张广辉,王永亮(2009). 多叶油润滑箔片轴承试验研究. 《宇航学报》.
  197. 窦唯,刘占生 (2009). A recognition method of vibration parameter image based on improved immune negative selection algorithm for rotating machinery. Journal of Harbin Institute of Technology(New series).
  198. 刘全忠,王洪杰,刘占生 (2009). Rotordynamic forces generated by discharge-to-suction leakage flows in centrifugal pumps. Journal of Harbin Institute of Technology(New series).
  199. Guang Zhao, Zhansheng Liu, Yongliang Wang, Jinfeng Zhang (2009). Study on Stabilities of Rotor-Bearing Systems With Different Types of Couplings.DOI
  200. Zhansheng Liu (2009). A fault diagnosis method based on gray level-gradient co-occurrence matrix of time-frequency image for rotating machinery.
  201. 窦唯,刘占生,王政先(2008). 旋转机械振动故障诊断的灰度-梯度共生矩阵方法. 《航空动力学报》.
  202. 窦唯,刘占生,马晓峰(2008). 旋转机械故障诊断的灰度-基元共生矩阵方法研究. 《航空动力学报》.
  203. 刘占生,张云峰,田新(2008). 冲压发动机超声速进气道流动自激振荡研究. 《航空动力学报》.
  204. 王东华,刘占生,窦唯(2008). 一种改进的转子系统临界转速调整方法. 《航空动力学报》.
  205. 窦唯,刘占生,王政先,何鹏(2008). 旋转机械状态参数图形识别的免疫-模糊形态学方法. 《航空动力学报》.
  206. Dou Wei, Zhansheng Liu (2008). Genetic Integration of Different Diagnosis Methods and/or Fault Features for Improvement of Diagnosis Accuracy. Journal of vibration and acoustics.DOI
  207. Guang Zhao, Zhansheng Liu, Feng Chen (2008). Meshing Force of Misaligned Spline Coupling and the Influence on Rotor System. International Journal of Rotating Machinery.DOI
  208. Zhansheng Liu (2008). Fluid-structure Interaction Simulation with Subcycling and Spline Interpolation Based Predict-correct Scheme. Chinese Journal of Mechanical Engineering.
  209. Zhansheng Liu, Zhang Yunfeng, Tian Xin (2008). Fluid-structure interaction of panel in supersonic fluid passage. Ha'erbin gongye daxue xuebao.
  210. Zhansheng Liu (2008). Study on the Leakage Flow Characteristics in the Stepped Labyrinth Seal Based on CFD. Turbine Technology.
  211. 刘占生,张云峰(2007). 非线性壁板颤振计算的子循环预测校正方法研究. 《航空动力学报》.
  212. 刘占生,李存生,黄智勇,宣统(2007). 涡轮泵转子弯扭耦合振动与分岔特性研究. 《火箭推进》.
  213. 张云峰,刘占生(2007). 粘弹壁板颤振的非线性动力特性. 《推进技术》.
  214. 刘占生,窦唯,王晓伟,赵广(2007). 基于人工免疫的直升机传动系统在线异常监测方法. 《航空学报》.
  215. 于达仁,刘占生,李强,刘金福(2007). 汽轮机配汽设计的优化. 《动力工程学报》.
  216. 叶建槐,刘占生(2007). 非线性转子-密封系统稳定性与分岔. 《航空动力学报》.
  217. Dou Wei, Zhansheng Liu (2007). A Fault Diagnosis Method Based on Clone and Mutation Mechanisms.DOI
  218. Zhansheng Liu, Senlin Huang, Jiexian Su (2007). Nonlinear Dynamic Analysis of an Unsymmetrical Generator-Bearing System. Journal of vibration and acoustics.DOI
  219. Wei Dou, Zhansheng Liu, Donghua Wang (2007). Combination Diagnosis Based on Genetic Algorithm for Rotating Machinery. International Conference on Natural Computation (ICNC).DOI
  220. Dou Wei, Zhansheng Liu, Wang Xiaowei (2007). Application of Image Recognition Based on Artificial Immune in Rotating Machinery Fault Diagnosis. International Conference on Bioinformatics and Biomedical Engineering.DOI
  221. Zhansheng Liu (2007). Study on the stability and bifurcation of nonlinear rotor-seal system. Journal of Aerospace Power.
  222. Zhansheng Liu, Xiaowei Wang, Wei Dou (2007). Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing.DOI
  223. 杨金福,杨昆,于达仁,杨勇平,付忠广,刘占生(2005). 滑动轴承非线性动态油膜压力分布特性的研究. 《动力工程学报》.
  224. 刘占生,张云峰(2005). 拉伸弹簧与扭转弹簧模拟动态网格方法分析与改进. 《哈尔滨工业大学学报》.
  225. 崔颖,刘占生,黄文虎,韩万金(2005). 高维转子-轴承系统非线性动力稳定性分析. 《哈尔滨工业大学学报》.
  226. 杨金福,杨昆,付忠广,于达仁,刘占生(2005). 滑动轴承转子系统稳定性判别与控制技术. 《中国动力工程学会第三届青年学术年会论文集》.
  227. 杨金福,杨昆,付忠广,于达仁,刘占生(2005). 滑动轴承轴颈涡动机理的非线性特性研究. 《中国动力工程学会第三届青年学术年会论文集》.
  228. Zhansheng Liu (2005). Rotor Structure Optimal Design Based on Genetic Algorithms. Turbine Technology.
  229. 刘占生,崔颖,冷淑香,韩万金,黄文虎(2004). 200MW汽轮机低压转子-轴承系统的非线性动力学分析. 《动力工程学报》.
  230. 刘占生,鲁建,吕伟剑,迟鼎南(2004). 转子—电磁轴承系统动静件碰摩动力特性研究. 《航空动力学报》.
  231. 杨金福,刘占生,于达仁,解永波(2004). 滑动轴承非线性动态油膜力及稳定性的研究. 《动力工程学报》.
  232. Zhansheng Liu, Senlin Huang, Jiexian Su, Songbo Xia (2003). Dynamic Analysis of an Unsymmetrical Rotor Supported by Oil Film Bearing.DOI
  233. 刘占生,叶建槐,隋玉秋(2002). 航空发动机刷式密封结构的动力学特性研究. 《哈尔滨工业大学学报》.
  234. 刘占生,叶建槐(2002). 刷式密封接触动力学特性研究. 《航空动力学报》.
  235. Senlin Huang, Zhansheng Liu, Jiexian Su (2002). On Double Frequency Vibration of a Generator-Bearing System With Asymmetrical Stiffness.DOI
  236. 刘占生,黄森林,苏杰先,唐炳照(2001). 非对称转子-轴承系统的稳定性分析. 《热能动力工程》.
  237. Zhansheng Liu, Senlin Huang, Jiexian Su, Wenhu Huang (2001). Dynamic Analysis of Unsymmetrical Flexible Rotor-Bearing Foundation System Under an Unsteady Oil-Film Force.DOI
  238. 刘占生,黄森林,唐炳照(2000). 轴表面误差对转子动平衡精度的影响. 《热能动力工程》.
  239. 刘占生,刘成敏,刘树春,范显峰,唐炳照(1999). 小波分析和分形几何在转子动静碰摩故障诊断中的应用. 《哈尔滨工业大学学报》.
  240. 陈照波,焦映厚,夏松波,刘占生,蒋书运(1999). 结构对称的SFD—柔性转子系统双稳态现象发生规律研究. 《航空动力学报》.
  241. 刘占生,武新华,张新江(1998). 基于神经网络及专家系统的混合诊断法. 《航空动力学报》.
  242. 刘占生,张新江,杨建国,夏松波(1998). 转子轴心轨迹故障诊断特征识别方法研究. 《哈尔滨工业大学学报》.
  243. 刘占生,武新华,夏松波(1997). 加快神经网络训练速度的方法在旋转机械故障诊断中的应用. 《航空动力学报》.
  244. 刘荣强,武新华,夏松波,刘占生(1996). 滑动轴承最佳稳定性的优化方法. 《航空动力学报》.

预印本

  1. Jiaqi Wang, Zhansheng Liu, Peng He, Dou Wei, Xuan Zou (2026). An approximate analytical method for hydrodynamic lubrication of finite-width wavy face mechanical seals. SSRN Electronic Journal.DOI
  2. Weigang Wang, Yuhang Chen, Zhansheng Liu, Jingyi Lu (2025). Innovative Data Augmentation Using Lightweight Diffusion Transformer for Imbalanced Fault Diagnosis. SSRN Electronic Journal.DOI

此主页由公开资料整理,尚未经学者本人认领。