张松

2026

Prediction and compensation of axial thermal error of spindle system considering structural deformation

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2026

A finite element simulation and experimental investigation of residual stress distribution below the machined surface in high-speed milling of Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2026

Tool wear prediction based on multi-scale dilated convolution long short-term memory network with channel-spatial attention

The International Journal of Advanced Manufacturing Technology

DOI

2026

Modeling and compensation for radial thermal error of a vertical machining center spindle

The International Journal of Advanced Manufacturing Technology

DOI

2026

A review of modeling for thermal error of motorized spindles of advanced machine tools

The International Journal of Advanced Manufacturing Technology

DOI

2025

Multiscale Simulation for Predicting grain Size and Microhardness in High-Speed Milling of Inconel 718

Metals and Materials International

DOI

2025

A decoupling modeling method for thermal error prediction of machine tool linear feed axes applicable to cross-conditions

Applied Thermal Engineering

DOI

2025

FEM-based numerical modeling of serrated chip formation in milling of Inconel 718

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2025

Experimental and simulation-based investigation of serrated chip formation in high-speed milling of Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2025

Finite element modeling for serrated chip formation and microstructure analysis of machined surface layer in high-speed milling of Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2025

Point clouds restoration of milling surfaces with considering micro-nano scale geometric features

Measurement

DOI

2025

Surface topography model for ball-end milling process based on modified sine-cosine algorithm

Surface Topography Metrology and Properties

DOI

2025

Position error decomposition and prediction of CNC machine tool under thermal–mechanical coupling loads

The International Journal of Advanced Manufacturing Technology

DOI

2024

多结构特征零件车铣复合加工工步排序优化

《组合机床与自动化加工技术》

2024

Prediction and compensation of position error based on deformation analysis of ball screw under complex loads

The International Journal of Advanced Manufacturing Technology

DOI

2024

Stochastic vibration analysis for linear rolling guide with considering geometric errors

Nonlinear Dynamics

DOI

2024

Cutting condition effects on microstructure and mechanical characteristics of Ni-based superalloys—a review

The International Journal of Advanced Manufacturing Technology

DOI

2023

基于贝叶斯优化Bi-LSTM的刀具磨损状态监测模型

《工具技术》

2023

考虑尺寸误差与径向载荷的双螺母滚珠丝杠静刚度分析

《中国机械工程》

2023

Effect of combined geometric errors on static load distribution and deformations for linear rolling guide

Tribology International

DOI

2023

A high efficiency 3D surface topography model for face milling processes

Journal of Manufacturing Processes

DOI

2023

Quasistatic deflection analysis of slender ball-end milling cutter

International Journal of Mechanical Sciences

DOI

2023

Investigation of static characteristics for linear rolling guide with considering geometric errors

Tribology International

DOI

2023

On the correlation between processing parameters, plastic deformation, and mechanical property in hard machining of H13 steel

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2022

基于误差分布特性的凹球面铣削轮廓误差预测

《计算机集成制造系统》

2022

基于能耗的铣削功率分析及切削参数多目标优化

《工具技术》

2022

箱体零件辅助加工时间建模及工步排序优化

《组合机床与自动化加工技术》

2022

On the importance of heat source model determination for numerical modeling of selective laser melting of IN625

Optics & Laser Technology

DOI

2022

Advancements in accuracy decline mechanisms and accuracy retention approaches of CNC machine tools: a review

The International Journal of Advanced Manufacturing Technology

DOI

2022

Laser micro-texture formation mechanism based on modified heat-mass transfers and hydrodynamic models

International Journal of Mechanical Sciences

DOI

2022

Energy consumption investigation of a three-axis machine tool and ball-end milling process

The International Journal of Advanced Manufacturing Technology

DOI

2022

Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies

Frontiers of Mechanical Engineering

DOI

2022

Oblique Cutting Based Mechanical Model for Insertion Torque of Dental Implant

Chinese Journal of Mechanical Engineering

DOI

2022

State-of-the-art in cutting performance and surface integrity considering tool edge micro-geometry in metal cutting process

Journal of Manufacturing Processes

DOI

2022

Numerical and experimental investigation on thermo-mechanically induced residual stress in high-speed milling of Ti-6Al-4V alloy

Journal of Manufacturing Processes

DOI

2022

A novel dental reconfigurable drilling guide based on standardized drilling sleeves and personalized substrate

Procedia CIRP

DOI

2021

改进的球头铣刀加工表面形貌建模方法

《计算机集成制造系统》

DOI

2021

数控机床平动轴几何误差辨识方法改进

《计算机集成制造系统》

DOI

2021

Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy

Journal of Manufacturing Processes

DOI

2021

Microstructural and mechanical property investigation of machined surface layer in high-speed milling of Ti-6Al-4V alloy

The International Journal of Advanced Manufacturing Technology

DOI

2021

Modified cutting force prediction model considering the true trajectory of cutting edge and in-process workpiece geometry in ball-end milling operation

The International Journal of Advanced Manufacturing Technology

DOI

2021

Modified iterative approach for predicting machined surface topography in ball-end milling operation

The International Journal of Advanced Manufacturing Technology

DOI

2021

Microstructure investigation of dynamic recrystallization in hard machining: From thermodynamic irreversibility perspective

Frontiers of Mechanical Engineering

DOI

2020

数控机床轻量化技术研究进展

《航空制造技术》

DOI

2020

铸造式和焊接式主轴箱体的动态特性对比分析

《制造技术与机床》

2020

Effects of Feed per Tooth and Radial Depth of Cut on Amplitude Parameters and Power Spectral Density of a Machined Surface

Materials

DOI

2020

Dislocation density and grain size evolution in hard machining of H13 steel: numerical and experimental investigation

Journal of Materials Research and Technology

DOI

2020

Surface topography model with considering corner radius and diameter of ball-nose end miller

The International Journal of Advanced Manufacturing Technology

DOI

2020

Effect of feed condition on thrust force and torque during continuous and step-by-step drilling of cortical bone

Procedia CIRP

DOI

2019

矿物复合材料机床支承件动静态特性研究

《制造技术与机床》

DOI

2019

H13钢硬态铣削表面变质层研究

《工具技术》

2019

基于分布式的柴油机缸体多品种小批量加工生产线规划

《工具技术》

2019

基于Plant Simulation的柴油机缸体生产线仿真与配置优化

《制造技术与机床》

DOI

2019

Quantitative evaluation of mechanical properties of machined surface layer using automated ball indentation technique

Materials Science and Engineering A

DOI

2019

Effect of edge hone radius on plowing-induced plastic deformation in hard milling: analytical modeling and experimental validation

The International Journal of Advanced Manufacturing Technology

DOI

2019

Effects of cutting parameters on surface quality in hard milling

Materials and Manufacturing Processes

DOI

2019

Deformation behaviour and texture evolution of martensite steel subjected to hard milling

Materials Characterization

DOI

2019

Investigation on plastic deformation behaviors in hard milling of H13 steel

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2019

Toward understanding of metallurgical behaviours in dry machining of hardened steel: phase transformation and surface oxidation

Journal of Materials Research and Technology

DOI

2019

Simulated and experimental analysis on serrated chip formation for hard milling process

Journal of Manufacturing Processes

DOI

2019

Modified Chip-Evacuation Force Modeling and Chip-Clogging Prediction in Drilling of Cortical Bone

IEEE Access

DOI

2018

基于表面形貌仿真模型的球头铣削参数多目标优化

《工具技术》

2018

Effect of deep cryogenic treatment on microstructure, mechanical properties and machining performances of coated carbide tool

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2018

Plastic deformation and grain refinement in surface layer induced by thermo-mechanical loads for hard milling process

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2018

Modelling of phase transformations induced by thermo-mechanical loads considering stress-strain effects in hard milling of AISI H13 steel

International Journal of Mechanical Sciences

DOI

2018

Comprehensive effects of tool paths on energy consumption, machining efficiency, and surface integrity in the milling of alloy cast Iron

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effect of edge hone radius on chip formation and its microstructural characterization in hard milling of AISI H13 steel

The International Journal of Advanced Manufacturing Technology

DOI

2018

Modeling of surface topography based on relationship between feed per tooth and radial depth of cut in ball-end milling of AISI H13 steel

The International Journal of Advanced Manufacturing Technology

DOI

2018

Modified power prediction model based on infinitesimal cutting force during face milling process

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2018

Deep cryogenic treatment of carbide tool and its cutting performances in hard milling of AISI H13 steel

Procedia CIRP

DOI

2018

Trade-off analysis of tool wear, machining quality and energy efficiency of alloy cast iron milling process

Procedia Manufacturing

DOI

2017

基于SolidWorks的滚齿过程几何仿真及切削力计算

《组合机床与自动化加工技术》

2017

加工中心进给系统动态特性分析及工作台尺寸优化设计

《制造技术与机床》

2017

Mechanical properties of bovine cortical bone based on the automated ball indentation technique and graphics processing method

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2017

Influence of edge hone radius on cutting forces, surface integrity, and surface oxidation in hard milling of AISI H13 steel

The International Journal of Advanced Manufacturing Technology

DOI

2017

Analysis of tool wear in face milling of alloy cast iron under constant material removal volume condition

The International Journal of Advanced Manufacturing Technology

DOI

2017

Three Dimensional Finite Element Simulation of Cutting Forces and Cutting Temperature in Hard Milling of AISI H13 Steel

Procedia Manufacturing

DOI

2016

基于射频识别技术的车间级刀具管理系统

《计算机集成制造系统》

DOI

2016

Tool path planning and milling surface simulation for vehicle rear bumper mold

Advances in Mechanical Engineering

DOI

2016

Optimal Cutting Parameters to Reduce Power Consumption in Face Milling of a Cast Iron Alloy for Environmental Sustainability

Smart innovation, systems and technologies

DOI

2016

Dynamic Characteristics Analysis for the Headstock of a Vertical Machining Center

Materials science forum

DOI

2015

基于指数函数的机床主轴热误差补偿模型

《计算机集成制造系统》

DOI

2015

Verification of finite element analysis of fixed partial denture with in vitro electronic strain measurement

Journal of Prosthodontic Research

DOI

2015

Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition

The International Journal of Advanced Manufacturing Technology

DOI

2015

Electrochemical Corrosion Resistance of AISI H13 Steel Machined by Electro Discharge Machining

DOI

2014

龙门加工中心溜板动静态特性分析及优化

《制造技术与机床》

2014

高速龙门加工中心摆角铣头动态特性分析

《制造技术与机床》

2014

球头铣刀加工表面形貌仿真预测

《计算机集成制造系统》

2014

Evaluation and ANN-Based Prediction on Functional Parameters of Surface Roughness in Precision Grinding of Cast Iron

Advanced materials research

DOI

2014

Electrochemical characteristics of white layer generated by hard milling AISI H13 steel

The International Journal of Advanced Manufacturing Technology

DOI

2014

Fracture mechanics analyses of ceramic/veneer interface under mixed-mode loading

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2014

Effect Analysis and ANN Prediction of Surface Roughness in End Milling AISI H13 Steel

Materials science forum

DOI

2014

Sensitivity Analysis of Temperature Measuring Points for Machine Tool Spindle Based on Grey System Theory

Materials science forum

DOI

2014

Effect of Thickness Ratio on Load‐Bearing Capacity of Bilayered Dental Ceramics

Journal of Prosthodontics

DOI

2014

Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method

Journal of Dentistry

DOI

2014

Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions

Advances in Mechanical Engineering

DOI

2013

球头铣刀加工倾角对表面形貌的影响

《计算机集成制造系统》

2013

An Experimental Investigation of Cutting Forces in Hard Milling of H13 Steel under Different Cooling/Lubrication Conditions

Key engineering materials

DOI

2013

CFD Analysis of Cryogenic Oil Mist of Milling Cutters with Different Interior Channels

Key engineering materials

DOI

2013

Static and Dynamic Analyses of Beam in Gantry-Type Milling Machine

Key engineering materials

DOI

2013

Saw-tooth chip formation and its effect on cutting force fluctuation in turning of Inconel 718

International Journal of Precision Engineering and Manufacturing

DOI

2012

Computer Fluid Dynamics Analysis of Cryogenic Oil Mist and Structural Optimization of Spraying Nozzle

Applied Mechanics and Materials

DOI

2012

Tool Wear Behavior in Turning Inconel 718 with Coated Inserts

Key engineering materials

DOI

2011

航空发动机整体机匣铣—车复合加工工艺优化

《计算机集成制造系统》

2011

Statistical Modeling of Surface Roughness in Hard Milling H13 Steel

Materials science forum

DOI

2011

Prediction of Surface Roughness Using Back-Propagation Neural Network in End Milling Ti-6Al-4V Alloy

Advanced materials research

DOI

2011

Experimental Investigation on Tool Wear when End-Milling Inconel 718 with Coated Carbide Inserts

Advanced materials research

DOI

2011

Optimization of Cutting Parameters for Desirable Surface Roughness in End-Milling Hardened AISI H13 Steel under a Certain Metal Removal Rate

Advanced materials research

DOI

2010

Statistical Analysis of Cutting Forces in Turning Inconel 718 with Coated Carbide Tools

Advanced materials research

DOI

2010

Optimal Cutting Parameters for Desired Surface Roughness in End Milling Inconel 718

Advanced materials research

DOI

2010

Estimation of Heat Transfer Coefficients in Dry and Cold-Air Cutting

Advanced materials research

DOI

2010

Tool wear criterion, tool life, and surface roughness during high-speed end milling Ti-6Al-4V alloy

Journal of Zhejiang University. Science A

DOI

2010

Optimizing end-milling parameters for surface roughness under different cooling/lubrication conditions

The International Journal of Advanced Manufacturing Technology

DOI

2010

Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel

The International Journal of Advanced Manufacturing Technology

DOI

2010

Research on Tool-Chip Friction during Ti6Al4V Milling Process with Different Cooling/Lubrication Methods

Advanced materials research

DOI

2010

Optimization of Cutting Parameters for Surface Roughness in Cold-Air Milling Ti6Al4V

Key engineering materials

DOI

2010

FEM-Based Dynamic Performances of HSK Spindle/Toolholder Interface

Key engineering materials

DOI

2009

Erratum to: Al7050-T7451 turning simulation based on the modified power-law material model

The International Journal of Advanced Manufacturing Technology

DOI

2009

Al7050-T7451 turning simulation based on the modified power-law material model

The International Journal of Advanced Manufacturing Technology

DOI

2009

Design Optimization of Cutting Parameters Using Taguchi Method and ANOVA during High-Speed Machining Hardened H13 Steel

Materials science forum

DOI

2009

The Effect of Cooling Lubrication Methods on Surface Roughness Measured by the White Light Interferometer

Advanced materials research

DOI

2008

高速切削加工稳定性研究的现状和发展趋势

《制造技术与机床》

2008

Tool Wear in High-Speed Milling of Ti-6Al-4V Alloy

Key engineering materials

DOI

2008

Present Situation and Trend of High Speed Cutting Stability

Manufacturing Technology & Machine Tool

2007

航空铝合金7050-T7451高速切削加工中流动应力模型(英文)

Transactions of Nanjing University of Aeronautics and Astronautics

2007

On the Taper Interference Fit in the HSK Spindle/Toolholder Interface

Key engineering materials

DOI

2007

Deformation Analysis of Aero Thin-Walled Workpiece Under Multi-Stress Coupled Effect

DOI

2006

航空整体结构件的高速切削加工

《工具技术》

2006

Performances of HSK Spindle/Toolholder Interface for HSM

Materials science forum

DOI

2006

Effects of Dynamic Characteristics of High-Speed Machine Tool/Cutting Tool System on Machining Quality

Key engineering materials

DOI

2006

Failure analysis on clamping bolt of milling cutter for high-speed machining

International Journal of Machining and Machinability of Materials

DOI

2004

高速主轴/刀柄联结特性的有限元分析

《现代制造工程》

DOI

2004

高速主轴/刀柄联接的离心力效应分析

《工具技术》

2004

Dynamic Modeling for High-Speed Milling System with Centrifugal Force and Gyroscopic Effect

Key engineering materials

DOI

2004

Connection Performance of Spindle/Toolholder Interface under High Rotational Speed

Key engineering materials

DOI

2004

Balancing of Tool/Toolholder Assembly for High-Speed Machining

Materials science forum

DOI

2004

Structure Dynamic Modification and Optimization for High-Speed Face Milling Cutter

Materials science forum

DOI

2003

高速主轴过盈联结特性研究

《制造技术与机床》

2003

7:24主轴/刀柄联接非均匀应力场的有限元分析

《工具技术》

2000

数控机床加工循环中的精度检测及补偿

《组合机床与自动化加工技术》

2008

Study of Cutting Temperature in Cold-Air Milling of Ti6Al4V Alloy

Springer eBooks

DOI