张真｜合肥工业大学｜学者主页

2026

Ni-Cr-Al-Fe合金冷轧变形组织及织构演变

张真，孙志杰，曹世举，许言午，李登云，姚力，周峰，朱凯，徐韬，章江铭，魏海根

《特种铸造及有色合金》

DOI

2026

镍基精密电阻合金热变形行为及热加工图研究

曹世举，李登云，周峰，朱凯，姚力，徐韬，章江铭，魏海根，张真

《热加工工艺》

DOI

2026

Cu-0.117Mn-0.013Ni合金热变形行为

张真，周子健，许言午，李登云，姚力，周峰，朱凯，徐韬，章江铭，梁家雄，蒲天宇，陈正坤，魏海根

《有色金属材料与工程》

DOI

2026

Inconel 625合金TIP-TIG堆焊涂层工艺及组织性能

张真，王晓军，马继国，陈龙

《腐蚀与防护》

2026

Chemical recycling of carbon fibre-reinforced bisphenol A-based epoxy-amine composite for fibre and monomer production: A review

Wu Liu, Cheng Li, Hui Liu, Zhen Zhang, Yuhe Liao, Xue-Hui Li, Xian-Yuan Wu

Green Energy & Environment

DOI

2026

A Chemocatalytic Route to Stereoregular Poly(3-hydroxyhexanoate) and Its Statistical and Tri-Block Copolymers

Min Zhu, Maëlle T. Gace, Zhen Zhang, E. Chen

Biomacromolecules

DOI

2025

Advances in Toughening Modification Methods for Epoxy Resins: A Comprehensive Review

Jiawei Zhang, Zhen Zhang, Ran Huang, Lianjiang Tan

Polymers

DOI

2025

Investigations of Edge Cutting Effects on Mechanical Behaviors of 3D Braided Composites with Different Braiding Angles

Yafei Bai, Zhen Zhang, Tao Liu, Zi-Yi Wu, Hao-Long Zhang, Ruixing Zhu, Yue Chen, Yi-Wei Ouyang, Jingjing Dong

Journal of Composites Science

DOI

2025

Mono‐Materials Created by Engineering a Continuum of P3HB Stereomicrostructures in a One‐Step Catalytic Process

Ethan C. Quinn, Celine R Parker, Maëlle T. Gace, Minjung Lee, Shu Xu, Ethan Poppen, Zhen Zhang, Deepak K Barange, Meltem Urgun-Demirtas, Nicholas A. Rorrer, E. Chen

Angewandte Chemie

DOI

2025

Stereomicrostructure-regulated biodegradable adhesives.

Zhen Zhang, Ethan C. Quinn, Jacob K. Kenny, Alexandra Grigoropoulos, Jason S. DesVeaux, Tiffany Chen, Li Zhou, Ting Xu, G. Beckham, E. Chen

Science

DOI

2025

Stereodivergent transformation of a natural polyester to enantiopure PHAs

Jun-Jie Tian, Ruirui Li, Ethan C. Quinn, Jiyun Nam, E. Chokkapu, Zhen Zhang, Li Zhou, Ravikumar R. Gowda, E. Chen

Nature

DOI

2025

The effect of calcium salt of carboxylic acid on the crystallization behavior and mechanical properties of Polybutylene succinate

Lai Jiang, Yijie Chen, Zhen Zhang, Shi-Cheng Zhao

Journal of polymer research

DOI

2025

Circular Polymer Designed by Regulating Entropy: Spiro-Valerolactone-Based Polyesters with High Gas Barriers and Adhesion Strength.

Cui-Ting Han, Kai Ma, Zhen Zhang, Ryan W. Clarke, Ravikumar R. Gowda, Tie-Qi Xu, E. Chen

Journal of the American Chemical Society

DOI

2025

Stereoregular Cyclic Poly(3-hydroxybutyrate) Enabled by Catalyst-Controlled Tacticity and Topology

Celine R Parker, Zhen Zhang, Ethan C. Quinn, Liam T. Reilly, Eugene Y.-X. Chen

Polymer Chemistry

DOI

2025

Beyond mechanical recycling: artificial photosynthesis enables polyester plastic upcycling into valuable chemicals

Meng-Meng Du, Zhen Zhang, Bocheng Qiu

Materials Futures

DOI

2024

TIP TIG堆焊Inconel625合金工艺及性能研究

张真

《兰州理工大学》

2024

冷却速率对Al-50%Si合金微观组织的影响

张真，张雨生，孔喆灏，陈欢欢，黄魏楼，胡先德，魏海根

《有色金属材料与工程》

2024

热挤压对快速凝固Al-Si-Fe-Cu-Mg合金显微组织及性能的影响

张真，孔喆灏，陈欢欢，杨明赛，张雨生，曹世举，魏海根，黄魏楼，胡先德

《有色金属加工》

2024

Influence of Carbon Nanotubes on the Mechanical Properties of PLA/MWCNTS Printed Parts in FDM Process

Zhen Zhang, Zhi-Yong Ma, Zhenkai Gao

Journal of Physics, Conference Series

DOI

2024

Chain-End Controlled Depolymerization Selectivity in α,α-Disubstituted Propionate PHAs with Dual Closed-Loop Recycling and Record-High Melting Temperature.

Li Zhou, Zhen Zhang, Ainara Sangroniz, Chang-Xia Shi, Ravikumar R. Gowda, Miriam Scoti, Deepak K Barange, Clarissa L. Lincoln, G. Beckham, E. Chen

Journal of the American Chemical Society

DOI

2024

Advances in developing thermally conductive polymers

Jinghang Dai, Zhen Zhang, Jian Luo, Hao Ma

Materials Research Letters

DOI

2024

Redesigned Nylon 6 Variants with Enhanced Recyclability, Ductility, and Transparency.

Jun-Jie Tian, Xiaoyang Liu, Liwei Ye, Zhen Zhang, Ethan C. Quinn, Chang-Xia Shi, L. Broadbelt, T. Marks, E. Chen

Angewandte Chemie

DOI

2023

Endowing Polythioester Vitrimer with Intrinsic Crystallinity and Chemical Recyclability.

Chang-Xia Shi, Zhen Zhang, Miriam Scoti, Xiao-Yun Yan, E. Chen

ChemSusChem

DOI

2023

Installing Controlled Stereo-Defects Yields Semicrystalline and Biodegradable Poly(3-Hydroxybutyrate) with High Toughness and Optical Clarity.

Ethan C. Quinn, Andrea H. Westlie, Ainara Sangroniz, M. R. Caputo, Shu Xu, Zhen Zhang, M. Urgun-Demirtas, A. Müller, E. Chen

Journal of the American Chemical Society

DOI

2023

Chemically circular, mechanically tough, and melt-processable polyhydroxyalkanoates

Li Zhou, Zhen Zhang, Chang-Xia Shi, Miriam Scoti, D. Barange, Ravikumar R. Gowda, E. Chen

Science

DOI

2023

Toughening Brittle Bio-P3HB with Synthetic P3HB of Engineered Stereomicrostructures.

Zhen Zhang, Ethan C. Quinn, Jorge L. Olmedo-Martínez, M. R. Caputo, Kevin A. Franklin, A. Müller, E. Chen

Angewandte Chemie

DOI

2022

表面机械研磨处理对AZ31镁合金力学性能的影响

吴勇，张真，陈欢欢，龙昌，张雨生，杨明赛，杜晓东，陈畅，王珊，吴玉程

《塑性工程学报》

2022

Spontaneous Alternating Copolymerization of Aziridines with Tosyl Isocyanate toward Polyureas

Huishan Huang, Haixiao Wei, Lu Huang, Ting Fan, Xu Li, Zhen Zhang, Tong-Fei Shi

European Polymer Journal

DOI

2022

Crystalline aliphatic polyesters from eight‐membered cyclic (di)esters

Xiao-Yan Tang, Chang-Xia Shi, Zhen Zhang, E. Chen

Journal of Polymer Science

DOI

2020

热处理对含钪6061铝合金组织和力学性能的影响

刘宁，马力，刘爱军，张真，陈名海，吴玉程

《材料热处理学报》

DOI

2019

镁合金中■两种孪晶界面的可动性比较

李亨，刘钊，张真，彭金华

《中国有色金属学报》

DOI

2018

压下量及时效对搅拌摩擦加工6061铝合金组织和力学性能的影响

李亨，司媛，罗志勇，周士昂，张真，吴玉程

《材料热处理学报》

2018

固溶时效对Al-0.2Ni铝合金组织和性能的影响

王丽媛，李亨，胡越，李明，张真

《热加工工艺》

2018

固溶及高温时效对Al-0.2Sc-0.04Zr、Al-0.15Sc-0.07Zr、Al-0.1Sc-0.05Zr合金力学性能的影响

李亨，胡越，徐圆义，张真

《轻金属》

2017

微量Sc、Zr及形变热处理对Al-Mg-Si合金组织与性能的影响

闫华，李亨，司媛，李明，张真，吴玉程

《金属热处理》

2017

AZ31镁合金压缩孪晶对组织及性能的影响

张辉，彭金华，张真，钟志宏，郑玉春，吴玉程

《金属热处理》

2017

时效状态对Cu-Cr-Zr系合金性能的影响

张真，陆冰沪，夏承东，张睿，陈畅，汪明朴

《有色金属材料与工程》

2016

添加Sc元素后Al-Mg合金的性能和结构变化

郑红梅，胡学飞，崔接武，王岩，张真，李玉坤，吴玉程

《材料热处理学报》

2011

AZ31B镁合金塑性变形行为的相关基础研究

张真

《中南大学》

2010

热轧过程中AZ31镁合金的组织及织构演变

张真，汪明朴，李树梅，蒋念，胡海龙，郝诗梦

《中国有色金属学报》

2010

AZ31B镁合金的低温压缩变形机制

李树梅，汪明朴，张真，李周，唐宁，雷前

《中国有色金属学报》

2010

La2O3对镦粗Mo棒的横向组织和塑性的影响

陈畅，汪明朴，谭望，张娟，金鹏，张真

《稀有金属材料与工程》

2009

不同厚度Ta-2.5wt%W合金箔材退火行为的研究

金鹏，汪明朴，郭明星，谭望，张真，陈畅

《矿冶工程》

2008

过程参数对双束熔体原位复合法制备的Cu-TiB2合金组织结构的影响

郭明星，汪明朴，张真，陈畅，申坤

《稀有金属材料与工程》

2007

粉末冶金法制备Mo-43wt%Re合金退火行为的研究

陈畅，汪明朴，郭明星，谭望，张真

《材料热处理学报》

2007

双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学

郭明星，汪明朴，申坤，张真，李树梅

《中国有色金属学报》

1992

Cu-AI-Ni形状记忆合金的超弹性和应力诱发相变

刘茂森，张真，陆问礼

《功能材料》

1992

NiTi(0.46wt%Cu)形状记忆合金中的诱发R相变

刘茂森，张真，陆问礼

《功能材料》

1987

Cu-Al-Ni形状记忆合金在热与应力循环下的行为

刘茂森，张真

《上海金属》

精选作品

期刊论文

Ni-Cr-Al-Fe合金冷轧变形组织及织构演变

镍基精密电阻合金热变形行为及热加工图研究

Cu-0.117Mn-0.013Ni合金热变形行为

Inconel 625合金TIP-TIG堆焊涂层工艺及组织性能

Chemical recycling of carbon fibre-reinforced bisphenol A-based epoxy-amine composite for fibre and monomer production: A review

A Chemocatalytic Route to Stereoregular Poly(3-hydroxyhexanoate) and Its Statistical and Tri-Block Copolymers

Advances in Toughening Modification Methods for Epoxy Resins: A Comprehensive Review

Investigations of Edge Cutting Effects on Mechanical Behaviors of 3D Braided Composites with Different Braiding Angles

Mono‐Materials Created by Engineering a Continuum of P3HB Stereomicrostructures in a One‐Step Catalytic Process

Stereomicrostructure-regulated biodegradable adhesives.

Stereodivergent transformation of a natural polyester to enantiopure PHAs

The effect of calcium salt of carboxylic acid on the crystallization behavior and mechanical properties of Polybutylene succinate

Circular Polymer Designed by Regulating Entropy: Spiro-Valerolactone-Based Polyesters with High Gas Barriers and Adhesion Strength.

Stereoregular Cyclic Poly(3-hydroxybutyrate) Enabled by Catalyst-Controlled Tacticity and Topology

Beyond mechanical recycling: artificial photosynthesis enables polyester plastic upcycling into valuable chemicals

TIP TIG堆焊Inconel625合金工艺及性能研究

冷却速率对Al-50%Si合金微观组织的影响

热挤压对快速凝固Al-Si-Fe-Cu-Mg合金显微组织及性能的影响

Influence of Carbon Nanotubes on the Mechanical Properties of PLA/MWCNTS Printed Parts in FDM Process

Chain-End Controlled Depolymerization Selectivity in α,α-Disubstituted Propionate PHAs with Dual Closed-Loop Recycling and Record-High Melting Temperature.

Advances in developing thermally conductive polymers

Redesigned Nylon 6 Variants with Enhanced Recyclability, Ductility, and Transparency.

Endowing Polythioester Vitrimer with Intrinsic Crystallinity and Chemical Recyclability.

Installing Controlled Stereo-Defects Yields Semicrystalline and Biodegradable Poly(3-Hydroxybutyrate) with High Toughness and Optical Clarity.

Chemically circular, mechanically tough, and melt-processable polyhydroxyalkanoates

Toughening Brittle Bio-P3HB with Synthetic P3HB of Engineered Stereomicrostructures.

表面机械研磨处理对AZ31镁合金力学性能的影响

Spontaneous Alternating Copolymerization of Aziridines with Tosyl Isocyanate toward Polyureas

Crystalline aliphatic polyesters from eight‐membered cyclic (di)esters

热处理对含钪6061铝合金组织和力学性能的影响

镁合金中■两种孪晶界面的可动性比较

压下量及时效对搅拌摩擦加工6061铝合金组织和力学性能的影响

固溶时效对Al-0.2Ni铝合金组织和性能的影响

固溶及高温时效对Al-0.2Sc-0.04Zr、Al-0.15Sc-0.07Zr、Al-0.1Sc-0.05Zr合金力学性能的影响

微量Sc、Zr及形变热处理对Al-Mg-Si合金组织与性能的影响

AZ31镁合金压缩孪晶对组织及性能的影响

时效状态对Cu-Cr-Zr系合金性能的影响

添加Sc元素后Al-Mg合金的性能和结构变化

AZ31B镁合金塑性变形行为的相关基础研究

热轧过程中AZ31镁合金的组织及织构演变

AZ31B镁合金的低温压缩变形机制

La2O3对镦粗Mo棒的横向组织和塑性的影响

不同厚度Ta-2.5wt%W合金箔材退火行为的研究

过程参数对双束熔体原位复合法制备的Cu-TiB2合金组织结构的影响

粉末冶金法制备Mo-43wt%Re合金退火行为的研究

双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学

Cu-AI-Ni形状记忆合金的超弹性和应力诱发相变

NiTi(0.46wt%Cu)形状记忆合金中的诱发R相变

Cu-Al-Ni形状记忆合金在热与应力循环下的行为