周建平

期刊论文

1. 陈小康，王月杰，王浩博，周建平，姜宏，汪兵兵（2026）. 不同服役温度下X80管线钢焊接接头力学性能研究. 《热加工工艺》.
2. 周文涛，周建平，任瑜（2026）. 低压微弧单脉冲放电下C/SiC-ZrC复合材料的凹坑形成过程研究. 《机床与液压》.
3. 代桂鑫，许燕，周建平，张惠琪，叶琛琛（2026）. 振动式核桃采摘机的设计与试验. 《农机化研究》.
4. 武星宇，周建平，许燕，陈小康，张文亚，王青，周李文（2026）. 棉秸秆制人造板热压成型工艺优化. 《中南林业科技大学学报》.DOI
5. 牛巧茹，周建平，许燕，宋洁，范俊伟，连国禹（2026）. GWO优化CNN的短电弧铣削电极损耗状态监测模型. 《机床与液压》.
6. 赵营营，许燕，周建平，崔超，王小荣，陈金荣（2026）. 基于机器视觉的红花采摘机器人自主导航方法研究. 《中国农机化学报》.
7. 朱瑞哲，陈小康，许燕，周建平，张文亚，王青，周李文（2026）. 基于EDEM的棉秸秆皮质髓清选装置设计与试验. 《农机化研究》.DOI
8. 张惠琪，许燕，周建平，段春旭，秦春雨，代桂鑫，叶琛琛（2026）. 核桃枝干模态分析与振动采收参数优化. 《农机化研究》.
9. 李先康，许燕，周建平，汪浩远，徐翔，左佳伟（2026）. 机收干红花丝离散元参数标定与试验. 《农业工程学报》.
10. 杨伟康，周建平，许燕，张逸舟，丁胜威（2026）. 基于TC4薄壁件颤振特征参数的低压微弧铣削稳定性优化研究. 《机床与液压》.
11. 周建平（2026）. 载人月球探测专刊序. 《中国空间科学技术(中英文)》.
12. 代桂鑫，许燕，周建平，张惠琪，叶琛琛（2026）. 核桃振动采摘机设计与电液控制系统优化. 《中国农机化学报》.
13. 汪兵兵，秦曹阳，丁胜威，周建平，沙磊，陈小康（2026）. 电弧放电凹坑形成机制及电参数影响规律研究. 《电加工与模具》.
14. 何国威，周建平，张卫红，顾逸东，张攀峰，陈猛，康琦，龙勉，田强，张璐，巴金，朱继宏，王丽珍，吕守芹，李曌斌（2026）. 微重力科学：开拓未知疆域与变革性技术的新高地. 《力学进展》.
15. 黄博，许燕，周建平，崔超，李先康，汪浩远，罗鸣（2026）. 辊刷式干红花花丝采收机构优化设计与试验. 《农机化研究》.
16. 汪浩远，许燕，周建平，李先康，左佳伟，徐翔（2026）. 基于离散元法的新疆地区红花田土壤参数标定. 《浙江农业学报》.
17. Zongjie Zhou, Yingxin Liu, Meiqin Liu, Jianping zhou, Guangwei Wen, Zonglong Sun, Menglei Wang (2026). Multi-flow-channel curved-surface electrical arc milling: Insights into debris-removal mechanisms, multidirectional pathways, and multiscale performance characterization. Journal of Materials Processing Technology.DOI
18. Yue Zhao, Shengsheng Zhang, Shifeng Wen, Yan Zhou, Jianping Zhou (2026). Recast layer evolution and corrosion behavior of different metallic materials subjected to electric arc–electrochemical machining. Journal of Materials Research and Technology.DOI
19. Tianyu Sun, Shengwei Ding, Jianping Zhou, Yizhou Zhang, Yan Ze Xu, Weikang Yang, Junwei Fan, Fengbo Yan, Yibo Guo, Xiong Jie, Houfei Cui (2026). Study on surface integrity and Cu-Al2O3 electrode wear behavior in ultrasonic-assisted electric arc machining of Inconel 718. Journal of Materials Research and Technology.DOI
20. Yu Ren, Yan Ze Xu, Jianping Zhou, Bingbing Wang, Shengwei Ding, Wentao Zhou, Fengbo Yan (2026). Regulating thermochemical erosion to achieve high-cleanliness surfaces on C/SiC composites: Mechanisms of gas-medium assisted electric arc machining. Journal of Materials Research and Technology.DOI
21. Bo Wang, Jianping Zhou, Yan Ze Xu, Bin Liu, Longhao Pei, Shunhao Wang, Wei Tang, Guan Zhang, Guangrui Wen (2026). Low-voltage micro-arc discharge-grinding hybrid machining: Discharge energy regulation for high-surface-quality machining of Inconel 718. Materials & Design.DOI
22. Guoyu Lian, Ziteng Lu, Huang Jiayang, Qiaoru Niu, Weikang Yang, Jianping Zhou, Yan Ze Xu, Jianping Zhou, Yan Ze Xu (2026). Research on a novel low-voltage micro-arc electrode milling process for Ti6Al4V. The International Journal of Advanced Manufacturing Technology.DOI
23. Xiang Tan, Yeyi Liao, Tonghang Si, Junren Jia, Hang Dong, Yuan Guo, Jianping Zhou (2026). Molecular dynamics simulation of the Electrocoalescence behavior among multiple conductive droplets with varying radii. AIP Advances.DOI
24. Qizhen Sun, Yan Cai, Ning Du, Hang Dong, Qingsong Zhang, Yuan Guo, Jianping Zhou (2026). Formation of an easily removable recast layer in electrical discharge machining of Ti-6Al-4V using water-in-oil nanoemulsion. The International Journal of Advanced Manufacturing Technology.DOI
25. Yu Ren, Yan Ze Xu, Jianping Zhou, Bingbing Wang, Shengwei Ding, Wentao Zhou, Fengbo Yan (2026). Electrical arc machining mechanisms in C/SiC composites: Coupled effects of conductivity contrast and weaving architecture. Ceramics International.DOI
26. Yutian Xia, Yan Cai, Ning Du, Hang Dong, Qingsong Zhang, Yuan Guo, Jianping Zhou (2026). Mechanism of electrical discharge and electrochemical hybrid sinking machining using water-in-oil nanoemulsion: processing phenomena and multiphysics simulation. AIP Advances.DOI
27. Shuhao Zhao, Xujun Guo, Shengsheng Zhang, Qingyuan Zhao, Jianping Zhou, Yinan Zhao (2026). Electrical arc–grinding hybrid machining: Hybrid electrode stability, thermo-mechanical–grinding coupled modeling, and high-quality surface machining of GH4099. Journal of Materials Research and Technology.DOI
28. Shengsheng Zhang, Yinan Zhao, Jianping Zhou, Xiaoxiao Chen, Yufeng Wang, Wenwu Zhang (2026). Electric arc electrochemical machining: Synergistic effect, material removal mechanism and process research. Journal of Manufacturing Processes.DOI
29. He Ping Zhou, Jianping Zhou (2026). Microstructural evolution and mechanical performance of laser-welded aluminum alloy/steel joints with a multi-component interlayer. Results in Engineering.DOI
30. 王家豪，胡国玉，周建平，张晟晟，付斐（2025）. 短电弧-电化学复合加工单次放电凹坑形成影响研究. 《热加工工艺》.DOI
31. 仇未星，周建平，王翔，许燕，胡国玉（2025）. Ti-6Al-4V短电弧铣削加工随机热源温度场研究. 《热加工工艺》.
32. He Zhou, Jianping Zhou (2025). Enhancing the microstructure and mechanical performance of laser weld-brazed aluminum alloy/steel joints by introducing a multi-element interlayer. Materials & Design.DOI
33. Shengsheng Zhang, Yinan Zhao, Jianping Zhou, Xiaoxiao Chen, Wenwu Zhang, Zongjie Zhou (2025). Arc discharge behavior of corroded surface and electrochemical corrosion characteristics of recast layer of Ti6Al4V titanium alloy. Journal of Materials Research and Technology.DOI
34. Jianping Zhou, Shengsheng Zhang, Yinan Zhao, Zongjie Zhou, Guoyu Hu, Lizhong Wang, Yan Ze Xu (2025). Research on material removal behavior and influence mechanism of electrochemical electric arc machining. International Communications in Heat and Mass Transfer.DOI
35. Shengwei Ding, Jianping Zhou, Bingbing Wang, Xujun Guo, Yu Ren, Yan Ze Xu (2025). Ultrasonic vibration-assisted short electric arc milling of Inconel 718: Influence of electrode materials on surface integrity. Materials Today Communications.DOI
36. Bingbing Wang, Jianping Zhou, Hongwang Ma, Yuan Yu, Shengwei Ding, Xiaokang Chen, Yan Ze Xu (2025). Research on the short electric arc milling performance and defect suppression method of 2.5-dimensional C/SiC composites. The International Journal of Advanced Manufacturing Technology.DOI
37. Can Zhao, Xiang Tan, Na Kong, Pengfei You, Changke Chen, Hang Dong, Jianping Zhou (2025). Research on the Corrosion Behavior of Droplet-To-Metal Based on Reactive Molecular Dynamics Simulation. Springer Proceedings in Materials.DOI
38. Yingxin Liu, Kai Liu, Zongjie Zhou, Jianping Zhou, Gao Xinxin (2025). Dynamic plasma behavior and melt pool evolution on inclined electric arc machining. International Journal of Thermal Sciences.DOI
39. 李启伟，薛瑞雷，周建平，吴立斌（2024）. 全位置管道焊接机器人机头结构设计与运动仿真. 《热加工工艺》.
40. 代向宇，胡国玉，周建平，张儒，王家豪（2024）. 工艺参数对短电弧–电化学复合加工表面质量的影响研究. 《航空制造技术》.
41. 王丽红，满蛟，周建平（2024）. Cu-Al-Ni形状记忆合金马氏体逆相变的相场模拟研究. 《特种铸造及有色合金》.
42. Jiazheng Mao, Jianping Zhou, Bingbing Wang, Yan Ze Xu, Shengwei Ding (2024). Study of ablation behavior on 2.5-dimensional C/SiC composites processed via short electric arc milling with various parameters. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
43. Yu Feng Qiu, Hang Dong, Na Kong, Weixin Gong, Jianping Zhou, Pengfei You, Changke Chen (2024). Research of electrical discharge and electrochemical combined machining technology. International Conference on Mechanical, Electronics and Electrical and Automation Control (METMS).DOI
44. Shengsheng Zhang, Jianping Zhou, Guoyu Hu, Lizhong Wang, Yan Ze Xu, Yinan Zhao (2024). Surface structure evolution and measurement analysis of Ti6Al4V titanium alloy by electric arc electrochemical machining. Measurement.DOI
45. Zhiang Zhang, Hang Dong, Jianping Zhou, Qizhen Sun (2024). Application of electrical discharge machining technology in Ti6Al4V. International Conference on Advanced Manufacturing Technology and Electronic Information (AMTEI).DOI
46. Can Zhao, Hang Dong, Na Kong, Xiang Tan, Jianping Zhou (2024). Corrosion behavior of droplet moving on metal copper surfaces: A reactive molecular dynamics simulation investigation. Computational Materials Science.DOI
47. Shengwei Ding, Jianping Zhou, Bingbing Wang, Zijian Wang, Bisheng Zhou (2024). Research on the ultrasonic vibration-assisted short electric arc milling process of Inconel 718. The International Journal of Advanced Manufacturing Technology.DOI
48. Bingbing Wang, Jianping Zhou, Xiaokang Chen, Yan Ze Xu, Wei Xiao Tang, Caoyang Qin, Yu Ji, Xianhe Yin (2024). Experimental investigation on Ti2AlNb in high-efficiency short electric arc milling. The International Journal of Advanced Manufacturing Technology.DOI
49. Bingbing Wang, Jianping Zhou, Yan Ze Xu, Xiaokang Chen, Wei Xiao Tang, Yu Ji, Caoyang Qin, Hongwang Ma (2024). Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites. The International Journal of Advanced Manufacturing Technology.DOI
50. Shengsheng Zhang, Jianping Zhou, Fei Fu, Guoyu Hu, Yinan Zhao, Lizhong Wang, Yan Ze Xu (2024). Electric arc electrochemical machining of Ti6Al4V titanium alloy based on high-pressure internal flushing fluid. Journal of Manufacturing Processes.DOI
51. Yinan Zhao, Jianping Zhou, Shengsheng Zhang, Zongjie Zhou, Xujun Guo, Zhouwei Liu, Yan Ze Xu (2024). Electrode-assisted hydrodynamic arc breaking for efficient side-cutting of Ti2AlNb. Journal of Manufacturing Processes.DOI
52. Hang Dong, Can Zhao, Na Kong, Yu Jun Zhou, Jianping Zhou (2024). Coupling Process between Droplet and Iron Investigated by Reactive Molecular Dynamics Simulations. ACS Omega.DOI
53. Kelimu Tulugan, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2024). Preparation of MXene and its application in low temperature electrically conductive adhesive. Materials Letters.DOI
54. 周建平，吴季（2023）. 统筹空间科学、空间技术、空间应用协调发展的思考. 《中国工程科学》, Vol. 25, No. 2.下载原文
55. 李禹辰，曹志刚，苏佩建，周建平（2023）. 曲线落料管冬季制作焊接工艺分析. 《热加工工艺》.
56. 仇未星，周建平，许燕，胡国玉，陈小康（2023）. Ti-6Al-4V短电弧铣削加工热源的有限元分析. 《机床与液压》.
57. 李晨阳，许燕，周建平，李静（2023）. 焊接工艺参数对仰焊MAG堆焊成形的影响. 《焊接》.
58. 季玉，周建平，汪兵兵，秦曹阳，唐伟（2023）. 基于温度场的C/SiC复合材料短电弧放电加工等效热源研究. 《制造技术与机床》.DOI
59. 高枫，薛瑞雷，满蛟，翁益青，周建平（2023）. WC含量及热处理对WC-Fe60熔覆层组织与性能的影响. 《金属热处理》.
60. 翁益青，薛瑞雷，满蛟，高枫，周建平，陈艳华，韩永红（2023）. 热处理对高速激光熔覆不锈钢熔覆层组织性能的影响. 《金属热处理》.
61. Shengsheng Zhang, Jianping Zhou, Guoyu Hu, Lizhong Wang (2023). Research on mechanism and experimental effect of tubular electrode dimensions on electric arc electrochemical composite machining. Materials and Manufacturing Processes.DOI
62. Hang Dong, Weixin Gong, Yu Feng Qiu, Jianping Zhou (2023). Electrical discharge and electrochemical hybrid sinking machining using water-in-oil nanoemulsion. The International Journal of Advanced Manufacturing Technology.DOI
63. Guangzhen Ren, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Titanium/steel composites were prepared by composite interlayer and two pass laser welding. Journal of Materials Research and Technology.DOI
64. Shengsheng Zhang, Jianping Zhou, Guoyu Hu, Lizhong Wang, Yan Ze Xu (2023). Process characteristics of electrochemical discharge machining and hybrid methods: a review. The International Journal of Advanced Manufacturing Technology.DOI
65. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Effect of process parameters on interface microstructure and performance in laser welding of steel-ZrO2 ceramic. Ceramics International.DOI
66. Shengsheng Zhang, Jianping Zhou, Yinan Zhao, Guoyu Hu, Fei Fu, Lizhong Wang, Yan Ze Xu (2023). Numerical simulation and experimental study of optimized jet shape in electric arc electrochemical composite machining. International Communications in Heat and Mass Transfer.DOI
67. Hong‐Sheng Liu, Ruilei Xue, Jianping Zhou, Yang Bao, Xiaojuan Li (2023). Implementation of a two-stage algorithm for NG-GMAW seam tracking and oscillation width adaptation in pipeline welding. Science and Technology of Welding & Joining.DOI
68. Xujun Guo, Jianping Zhou, Yinan Zhao, Shengsheng Zhang, Xianhe Yin, Yan Ze Xu (2023). Multi-objective parameter optimization of Ti6Al4V surface integrity for SEAM. The International Journal of Advanced Manufacturing Technology.DOI
69. Hong‐Sheng Liu, Ruilei Xue, Jianping Zhou, Yang Bao (2023). Prediction of oscillating parameters of vertical oscillating arc all-position NG-GMAW based on optimized BPNN. The International Journal of Advanced Manufacturing Technology.DOI
70. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Ceramic/Steel Connection Using the Composite Interlayer Method. American Journal of Materials Synthesis and Processing.DOI
71. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Ceramic/Steel Connection Using a Single Interlayer Method. International Journal of Materials Science and Applications.DOI
72. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Self-Propagating High-Temperature Synthesis of Ceramic Matrix Composites. Engineering and Applied Sciences.DOI
73. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Non-Reactive Brazed Connections of Steel/Ceramics. American Journal of Applied Scientific Research.DOI
74. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Reactive Brazed Connections of Steel/Ceramics. American Journal of Applied Scientific Research.DOI
75. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research on Ceramic/Steel Connection Using the Composite Brazing Method. International Journal of Materials Science and Applications.DOI
76. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Developing high-strength titanium/steel composite structures by adding composite interlayer. Materials Letters.DOI
77. Xianhe Yin, Jianping Zhou, Xiaokang Chen, Xujun Guo, Bingbing Wang, Yan Ze Xu (2023). Milling performance of Ti2AlNb by DC short electric arc machining based on different electrode materials. The International Journal of Advanced Manufacturing Technology.DOI
78. Yuqiang Liu, Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Research advances on weldability of Mg alloy and other metals worldwide in recent 20 years. Journal of Materials Research and Technology.DOI
79. Hongsheng Liu, Ruilei Xue, Jianping Zhou, Yang Bao, Yan Hai Xu (2023). Effects of Oscillation Width on Arc Characteristics and Droplet Transfer in Vertical Oscillation Arc Narrow-Gap P-GMAW of X80 Steel. Metals.DOI
80. Bingbing Wang, Jianping Zhou, Xiaokang Chen, Yan Ze Xu, Wei Xiao Tang, Caoyang Qin, Yu Ji (2023). Effects of non-electrical parameters on the characteristics of discharge craters and machining performance in short electrical arc milling. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
81. Deshui Yu, Yan Zhang, Seyed Reza Elmi Hosseini, Jianping Zhou, Daqian Sun (2023). Element diffusion and microstructure evolution at interface of stainless steel/Ti alloy joint by laser welding with AgCuTi filler metal. Journal of Materials Research and Technology.DOI
82. Ruming Zhao, Hang Dong, Jianping Zhou, Ruixiang Li, Changke Chen, Pengfei You (2023). State of the Art in Power Supply of Electrical Discharge Machining, Electrochemical Machining and their Variants. Journal of Physics Conference Series.DOI
83. Yinan Zhao, Jianping Zhou, Shengsheng Zhang, Xiangyu Dai, Ru Zhang, Zhouwei Liu, Yan Ze Xu (2023). Study on the effect of air and argon assisted short electric arc machining on Ti6Al4V titanium alloy. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
84. Kai Liu, Muhammad Ajmal Khan, Zongjie Zhou, Dan Song, Jianping Zhou (2023). High-efficiency DC-SEAM for aerospace materials with Joule-arc heat transition and ignition mechanism. CIRP journal of manufacturing science and technology.DOI
85. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Effect of Ti3C2Tx/Ag/MWCNTs/Ag MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives. Ceramics International.DOI
86. Yan Zhang, Yuqiang Liu, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Preparation of High Conductive Medium and Establishment of Laege Capacity Conductive Channel. Advanced Materials.DOI
87. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Self-assembly of MXene V2CTx/Ag/rGO layered multiscale structure nanocomposite. Ceramics International.DOI
88. Yang Bao, Ruilei Xue, Jianping Zhou, Yan Hai Xu (2023). Effect of Increasing Oscillation Width on the Arc Characteristics and Droplet Transfer Behavior of X80 Steel in the Overhead Welding Position of Narrow Gap P-GMAW. Metals.DOI
89. Dan Song, Kai Liu, Muhammad Ajmal Khan, Hu Luo, Li Zhang, Zongjie Zhou, Jianbo Zhang, Beenish Bashir, Jianping Zhou (2023). Highly energy-efficient and safe-environment-friendly ultra short electrical arc machining for titanium alloy: Mechanism, characteristics, and parameter estimation. Journal of Cleaner Production.DOI
90. H.-P. Liu, Ruilei Xue, Jianping Zhou, Yang Bao, Yan Ze Xu (2023). Applying Statistical Models to Optimize the Weld Bead Geometry in the Vertical Oscillation Arc Narrow Gap All-Position GMAW. Applied Sciences.DOI
91. Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2023). Effect of Ti3C2Tx/Ag MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives. Ceramics International.DOI
92. Yang Bao, Ruilei Xue, Jianping Zhou, Hongsheng Liu, Yan Hai Xu (2023). The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process. Applied Sciences.DOI
93. 周祯童，周建平，许燕，刘宏胜（2022）. X80管线钢GMAW的数值模拟及组织研究. 《热加工工艺》.
94. 曹志刚，方亦元，李禹辰，苏佩建，周建平，曹雅涵（2022）. 使用φ6.5mm LS钢线材盘卷生产φ3.2mm冷拔丝的缺陷分析. 《热加工工艺》.
95. 周祯童，周建平，许燕（2022）. 基于GMAW堆焊成型的焊缝模型及搭接量研究. 《热加工工艺》.
96. 陈汉杰，周建平，胡剑锋（2022）. 先进多工位激光切割生产线. 《锻造与冲压》.
97. 周建平，李威，温求遒，夏群利，姜欢（2022）. 考虑滚仰导引头寄生回路的旋转导弹驾驶仪稳定性设计. 《兵工学报》.
98. Xiangyu Dai, Guoyu Hu, Kai Liu, Weixing Qiu, Shengsheng Zhang, Zongjie Zhou, Ru Zhang, Jianping Zhou (2022). Research on milling performance of titanium alloy in a new hybrid process combining short electric arc and electrochemical machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
99. Weixin Gong, Hang Dong, Jianping Zhou, Yu Feng Qiu, Changke Chen, Pengfei You (2022). Research Progress of Electrical Discharge and Electrochemical Hybrid Machining Technology. World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM).DOI
100. Xuezhi Li, Zewen Li, Tianbo Wu, Jianping Zhou (2022). Experimental research on short electric arc milling machining based on the mechanical-fluid coupling effect. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
101. Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Joining of titanium—copper TA2/T2 bimetallic sheet by double side laser—TIG welding. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
102. Zefeng Sheng, Yan Xu, Hao Guo, Jianping Zhou, Lianlai Chang, Weizhen Ding, Bao Jun Yang (2022). Study on droplet transfer behavior during medium and low power laser assisted pulsed MAG hybrid welding. Optik.DOI
103. Shengsheng Zhang, Guoyu Hu, Jianping Zhou, Lizhong Wang, Yan Xu, Xiangyu Dai, Jiahao Wang, Xinyang Ma (2022). Research on short electric arc–electrochemical combined machining performance of Ti–6Al–4V alloys using different electrode materials. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
104. Shengsheng Zhang, Jianping Zhou, Guoyu Hu, Lizhong Wang, Ru Zhang, Xiangyu Dai, Yan Ze Xu (2022). Effect of power excitation form on machining characteristics of TC4 titanium alloy by SEAM-ECM combined machining. The International Journal of Advanced Manufacturing Technology.DOI
105. Yinan Zhao, Jianping Zhou, Xiangyu Dai, Ru Zhang, Zhouwei Liu, Shengsheng Zhang, Yan Ze Xu (2022). Efficient and sustainable short electric arc machining based on SKD-11 material. Alexandria Engineering Journal.DOI
106. Zhouwei Liu, Kai Liu, Xiangyu Dai, Jianping Zhou, Yan Ze Xu, Zongjie Zhou (2022). Milling performance of Inconel 718 based on DC short electric arc machining with graphite and W-Ag electrode materials. The International Journal of Advanced Manufacturing Technology.DOI
107. Hang Dong, Ruming Zhao, Weixin Gong, Jianping Zhou (2022). High-efficient compound sinking machining of Ti6Al4V with the assistance of oxygen. Materials and Manufacturing Processes.DOI
108. DuiShui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Titanium/steel composites were prepared by machine tool machining and composite welding mechanism. Optics & Laser Technology.DOI
109. Yuqiang Liu, Yan Zhang, YanBo Bi, Deshui Yu, Jianping Zhou, ZhiZhou Wu, Daqian Sun (2022). Relationship between interface heat input and microstructure of titanium/steel composite material was prepared by laser processing. Optics & Laser Technology.DOI
110. Haoyuan Zeng, Deshui Yu, Yan Zhang, Jianping Zhou, Yankun Chen (2022). Microstructure and mechanical properties of laser indirect brazed titanium/steel composite joint with a CuZn filler metal. Materials Science and Technology.DOI
111. Yan Zhang, Yidi Gao, Deshui Yu, Jianping Zhou, Daqian Sun (2022). Preparation of high-strength TC4/304 dissimilar joint with TA2/304 composite interlayer by a dual-pass laser. Optics & Laser Technology.DOI
112. Hang Dong, Weixin Gong, Ruming Zhao, Jianping Zhou (2022). Gas-assisted green and efficient compound sinking machining of nickel-based alloy. Journal of Manufacturing Processes.DOI
113. Zongjie Zhou, Kai Liu, Jianping Zhou, Yan Ze Xu, Lizhong Wang (2022). A highly energy-efficient milling of Inconel 718 via modulated short electric arc machining. Journal of Manufacturing Processes.DOI
114. Zongjie Zhou, Kai Liu, Yan Ze Xu, Jianping Zhou, Lizhong Wang (2022). Experimental research on short electric arc milling of Ti6Al4V with different electrode polarities. The International Journal of Advanced Manufacturing Technology.DOI
115. Shengsheng Zhang, Lizhong Wang, Jianping Zhou, Xiangyu Dai, Yan Ze Xu, Weixing Qiu, Shuaishuai Wang, Guoyu Hu (2022). SEAM-ECM jet milling TC4 titanium alloy using gas–liquid mixed medium. The International Journal of Advanced Manufacturing Technology.DOI
116. Haoyuan Zeng, Jianping Zhou, Yan Zhang (2022). Research Progress of Composite Materials of NiTi SMA and Stainless Steel. Advances in Materials.DOI
117. Haoyuan Zeng, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Research Progress of Fusion Welding Techniques for Steel to Other Metals. American Journal of Mechanical and Materials Engineering.DOI
118. Zhijin Guo, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Research Progress of Fusion Welding Techniques for TiNi Alloy to Steel. International Journal of Mineral Processing and Extractive Metallurgy.DOI
119. ZhiJin Guo, WenBin Lu, Yan G. Zhang, Jianping Zhou, Daqian Sun (2022). MXene fillers and silver flakes filled epoxy resin for new hybrid conductive adhesives. Ceramics International.DOI
120. ZhiJin Guo, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Facile self-assembly of sandwich-like MXene layered multiscale structure nanocomposite. 2D Materials.DOI
121. WenBin Lu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Effect of MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives. Ceramics International.DOI
122. Bin Liu, Jianping Zhou, Liang Wang, You Wang (2022). Research Progress of Self-Healing Thermal Barrier Coatings: A Review. Coatings.DOI
123. Yan Zhang, WenBin Lu, Jianping Zhou, Daqian Sun, Hongmei Li (2022). The multiple synthesis of layered V2CTx-MXene composites with enhanced electrochemical properties. Journal of Alloys and Compounds.DOI
124. Yan Zhang, WenBin Lu, Jianping Zhou, Daqian Sun, Hongmei Li (2022). Facile self-assembly of sandwich-like MXene V2CTx/Ag/rGO/MWCNTs layered multiscale structure nanocomposite. Ceramics International.DOI
125. Yan Zhang, ZhiJin Guo, Jianping Zhou, Daqian Sun, Hongmei Li (2022). The multiple synthesis of 2D layered Ti3C2Tx/Ag/MWCNTs/Ag composites with enhanced electrochemical properties. Ceramics International.DOI
126. Yan Zhang, ZhiJin Guo, Jianping Zhou, Daqian Sun, Hongmei Li (2022). The multiple synthesis of 2D layered MXene Ti3C2Tx/Ag/Cu composites with enhanced electrochemical properties. Ceramics International.DOI
127. 张岩，曾浩源，于得水，周建平（2021）. 搭载四轴空间运动平台的小型管道激光焊接设备及其应用. 《“伊萨杯”先进焊接技术交流会文集》.DOI
128. 钟凯强，周建平，薛瑞雷，熊莹（2021）. 一种采用Lagrange插值的相贯线简化算法. 《热加工工艺》.DOI
129. 周建平（2021）. 序言. 《航空学报》.
130. 周建平，白桥栋，翁春生，王放，徐高（2021）. 环形燃烧室内气液同轴雾化数值模拟研究. 《推进技术》.
131. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Hongmei Li (2021). Compound connection mechanism of Al2O3 ceramic and TC4 Ti alloy with different joining modes. Scientific Reports.DOI
132. Yidi Gao, Yan Zhang, Yan Ze Xu, Jianping Zhou (2021). The butt of CP-Ti/304 stainless steel and CP-Ti/T2 bimetallic sheets using laser-induction heating welding technology. Materials Letters.DOI
133. Yidi Gao, Yan Zhang, Jing Li, Kai Liu, Yan Ze Xu, Jianping Zhou (2021). Research on the performance of laser-MIG arc tandem welding of CP-Ti/304 stainless steel bimetallic sheets. Materials Letters.DOI
134. Yan Zhang, Yuanbo Bi, Jianping Zhou, Daqian Sun, Hongmei Li (2021). Weldability and machinability of the dissimilar joints of Ti alloy and stainless steel – A review. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
135. Zongjie Zhou, Kai Liu, Yan Ze Xu, Jianping Zhou, Lizhong Wang (2021). Experimental study on high-efficiency DC short electric arc milling of titanium alloy Ti6Al4V. The International Journal of Advanced Manufacturing Technology.DOI
136. Dan Song, Jianping Zhou, Kedian Wang, Xuezhi Li, Xiaokang Chen, Kai Liu, Shuaishuai Wang, Xiang Wang (2021). Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc milling. The International Journal of Advanced Manufacturing Technology.DOI
137. Xiaokang Chen, Jianping Zhou, Kedian Wang, Yan Ze Xu (2021). Experimental research on single-pulse discharge crater morphology in SEAM. Materials and Manufacturing Processes.DOI
138. Li Zhang, Guoyu Hu, Jianping Zhou, Zongjie Zhou, Kai Liu, Shengsheng Zhang (2021). Investigating the pulse short electric arc milling of Ti6Al4V alloy. The International Journal of Advanced Manufacturing Technology.DOI
139. Yan Zhang, Yidi Gao, Jianping Zhou, Daqian Sun, Hongmei Li (2021). Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
140. Yan Zhang, Deshui Yu, Jianping Zhou, Daqian Sun, Hongmei Li (2021). Microstructure and mechanical property improvement of dissimilar metal joints for TC4 Ti alloy to Nitinol NiTi alloy by laser welding. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
141. Yan Zhang, Jianping Zhou, Daqian Sun, Xiaoyu Gu (2021). Characterization of Pulsed Laser Welded Titanium Alloy and Stainless Steel Joint Using Nb as Interlayer. steel research international.DOI
142. Zongjie Zhou, Jianping Zhou, Kai Liu, Yan Ze Xu, Guoyu Hu, Lizhong Wang (2021). Experimental study on short electric arc machining of Ti6Al4V in terms of power output characteristics. The International Journal of Advanced Manufacturing Technology.DOI
143. Yankun Chen, Jianping Zhou, Yan Zhang, Yan Ze Xu, Yang Bao (2021). Single-pass laser brazing of TC4 alloy and 304 stainless steel with Cu interlayer and Cu-Zn filler metal. Materials Letters.DOI
144. Hang Dong, Yu Jun Zhou, Chao Zheng, Jianping Zhou (2021). On the role of the amphiphobic surface properties in droplet wetting behaviors via molecular dynamics simulation. Applied Surface Science.DOI
145. Yang Bao, Jianping Zhou, Yan Zhang, Yan Ze Xu, Hongsheng Liu (2021). Microstructural and mechanical characteristics of direct laser welding 7075 super hard aluminum alloy/ D6AC ultra-high strength alloy structural steel. Materials Letters.DOI
146. Yan Zhang, Deshui Yu, Jianping Zhou, Daqian Sun (2021). A review of dissimilar welding for titanium alloys with light alloys. Metallurgical Research & Technology.DOI
147. 周建平，万天明（2020）. 水工金属结构常见技术及质量问题. 《焊接技术》.DOI
148. 于得水，张岩，周建平，毕元波，鲍阳（2020）. 钛合金与铝合金异种金属焊接的研究现状. 《焊接》.
149. 黄云，周鹏飞，危荃，李来平，周建平（2020）. 视频内窥镜技术在火箭管路上的应用. 《宇航材料工艺》.
150. 何建斌，许燕，周建平，鲍阳（2020）. 成形参数和搭接量对堆焊成形尺寸的影响. 《热加工工艺》.DOI
151. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Hongmei Li (2020). Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material. Metallurgical Research & Technology.DOI
152. Xuezhi Li, Jianping Zhou, Yan Zhang, Daqian Sun, Hongmei Li (2020). Discharge characteristics of W-Cu electrode in short electrical arc discharge machining of Inconel 718. The International Journal of Advanced Manufacturing Technology.DOI
153. Kai Liu, Jianping Zhou, Zongjie Zhou, Yan Ze Xu, Guoyu Hu, Li Zhang, Dan Song (2020). Milling performance of titanium alloy based on short electric arc machining with direct current power source. The International Journal of Advanced Manufacturing Technology.DOI
154. Yan Zhang, Haoyuan Zeng, Jianping Zhou, Ruilei Xue, Daqian Sun, Hongmei Li (2020). Characterization of laser beam offset welding TiNi alloy and 304 stainless steel with different joining modes. Optics & Laser Technology.DOI
155. Xuezhi Li, Jianping Zhou, Kedian Wang, Tianbo Wu, Yan Ze Xu, Guoyu Hu (2020). Arc characteristics in short electrical arc high-efficiency milling for GH4169. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
156. Yan Zhang, Yuanbo Bi, Jianping Zhou, Daqian Sun, Hongmei Li (2020). Microstructure and mechanical property improvement of Ti alloy and stainless steel joint based on a hybrid connection mechanism. Materials Letters.DOI
157. Yan Zhang, Yankun Chen, Jianping Zhou, Ruilei Xue, Daqian Sun, Hongmei Li (2020). Characterization of laser beam offset welding of titanium to steel with 38Zn-61Cu alloy filler. Optics & Laser Technology.DOI
158. 周建平，万天明（2019）. 水电工程用钢及其焊接材料应用情况. 《焊接技术》.DOI
159. 施传锐，周建平，伊里哈木·阿布都热木（2019）. 堆焊速度对堆焊成型质量的影响. 《热加工工艺》.DOI
160. 满蛟，周建平，薛瑞雷，许燕，宫伟兴，邓超，吕振家（2019）. 汽轮机叶片激光熔覆修复工艺模拟及试验研究. 《焊接技术》.DOI
161. 陈伟安，李明贤，徐东镇，黄俊，周建平，刘然（2019）. 一种智能拖地机器人设计与研究. 《机械》.
162. Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Three-pass laser welding of Ti alloy-stainless steel using Nb and Ni interlayers. Journal of Materials Research and Technology.DOI
163. Xiaokang Chen, Jianping Zhou, Kedian Wang, Yan Ze Xu, Guoyu Hu (2019). Experimental research on the influence of dielectrics on short electric arc machining of GH4169. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
164. Yan Zhang, Jianping Zhou, Daqian Sun, Xiaoyan Gu (2019). Nd:YAG laser welding of dissimilar metals of titanium alloy to stainless steel without filler metal based on a hybrid connection mechanism. Journal of Materials Research and Technology.DOI
165. Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Two pass laser welding of TC4 Titanium alloy to 301L stainless steel via pure V interlayer. Journal of Materials Research and Technology.DOI
166. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Xiaoyan Gu (2019). Forming mechanism and mechanical property of pulsed laser welded Ti alloy and stainless steel joint using copper as interlayer. Journal of Materials Research and Technology.DOI
167. Yan Zhang, Yuanbo Bi, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Strength improvement and interface characteristic of TC4 Ti alloy and 304 stainless steel joint based on a hybrid connection mechanism. Journal of Materials Research and Technology.DOI
168. Yan Zhang, Yuanbo Bi, Jianping Zhou, Daqian Sun, Xiaoyan Gu (2019). Butt laser welding of TC4 Titanium alloy and 304 stainless steel with Ag-base filler metal based on a hybrid connection mechanism. Optics & Laser Technology.DOI
169. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Microstructure and mechanical property in laser welding-brazing of stainless steel and titanium alloy using 63Sn-37Pb alloy as filler metal. Welding in the World.DOI
170. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Experimental and numerical study on microstructure and mechanical properties for laser welding-brazing of TC4 Titanium alloy and 304 stainless steel with Cu-base filler metal. Journal of Materials Research and Technology.DOI
171. Yan Zhang, Yankun Chen, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Interfacial microstructure evolution and mechanical properties of TC4 alloy-304 stainless steel joints with different joining modes. Materials Letters.DOI
172. Xiaokang Chen, Jianping Zhou, Kedian Wang, Yan Ze Xu, Guoyu Hu (2019). A study on machining characteristics of nickel-based alloy with short electric arc milling. The International Journal of Advanced Manufacturing Technology.DOI
173. Yan Zhang, Yidi Gao, Jianping Zhou, Daqian Sun, Hongmei Li (2019). Microstructure and Mechanical Property Improvement of Dissimilar Metal Joints for TC4 Ti Alloy to 304 Stainless Steel Using TA2/Q235 Composite Interlayer. Metals and Materials International.DOI
174. Yidi Gao, Jianping Zhou, Yan Zhang, Daqian Sun, Hongmei Li (2019). Two pass laser welding of TC4 titanium alloy and 304 stainless steel using TA2/Q235 composite interlayer. Materials Letters.DOI
175. Xiaokang Chen, Jianping Zhou, Kedian Wang, Yan Ze Xu (2019). Influence of different tool polarity on short electric arc machining of GH4169. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
176. 鲍阳，周建平，许燕，李丙如（2018）. 层间冷却时间及起弧方式对堆焊成型质量的影响. 《热加工工艺》.
177. 董杰，许燕，王恪典，周建平，伊里哈木·阿不都热木（2018）. 焊丝干伸长量对堆焊成形效果影响研究. 《铸造技术》.
178. 李丙如，周建平，许燕，鲍阳（2018）. 金属熔焊成形三维温度场数值模拟与分析. 《焊接学报》.
179. 来旭辉，许燕，周建平，伊里哈木·阿布都热木（2018）. 基于RBF网络的自适应熔焊插补容错算法. 《焊接学报》.
180. 来旭辉，许燕，周建平（2018）. 柱坐标熔焊机器人分层算法与成形效果分析. 《焊接学报》.
181. Lingli Cui, Xin Wang, Yonggang Xu, Hong Jiang, Jianping Zhou (2018). A novel Switching Unscented Kalman Filter method for remaining useful life prediction of rolling bearing. Measurement.DOI
182. Xuezhi Li, Jianping Zhou, Yan Ze Xu, Chenguang Zhu, Kedian Wang, Tianbo Wu (2018). Experimental study in SEAM machining performance of W-Cu alloy electrode materials. The International Journal of Advanced Manufacturing Technology.DOI
183. Xuezhi Li, Jianping Zhou, Kedian Wang (2018). Research on removal characteristics of recast layer of laser-electrolytic machining on small holes. The International Journal of Advanced Manufacturing Technology.DOI
184. Xuezhi Li, Jianping Zhou, Kedian Wang, Yan Ze Xu, Tianbo Wu (2018). Experimental research on machinability of different electrode materials for SEAM of the nickel-based superalloy GH4169. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
185. 江祥胜，许燕，周建平，单雪海（2017）. 基于GMAW堆焊成形的堆焊层焊道搭接量及力学性能研究. 《热加工工艺》.
186. 许燕，江祥胜，周建平，薛瑞雷，伊里哈木·阿布都热木（2017）. 堆焊时间间隔对堆焊件显微组织的影响. 《热加工工艺》.
187. 许燕，邓红敏，单学海，周建平（2017）. 堆焊快速成形中的缺陷分析及参数优化. 《热加工工艺》.
188. 许燕，来旭辉，周建平，薛瑞雷，伊里哈木·阿布都热木（2017）. 熔焊成型焊缝质量控制与实验验证. 《铸造技术》.DOI
189. 许燕，李丙如，鲍阳，周建平，薛瑞雷（2017）. 金属堆焊成型层间应力分析及工艺优化. 《铸造技术》.
190. Xuezhi Li, Jianping Zhou, Kedian Wang, Yan Ze Xu (2017). Temperature field simulation of the molten pool in SEAM. The International Journal of Advanced Manufacturing Technology.DOI
191. 操窘，周建平，许燕，尹贻梁，许以浩（2016）. 短电弧机床加工电源的反馈环路设计. 《焊接学报》.
192. 周建平，许燕，操窘，尹贻梁，许以浩（2016）. 基于BP神经网络和遗传算法的大功率脉冲电源优化设计. 《焊接学报》.
193. 李智钟，周建平，许燕，李丙如（2016）. 基于Sysweld的T形管焊接件温度及应力应变场数值模拟分析. 《焊接学报》.
194. 周建平，房旺，邓华（2016）. 一种新型顶升装置的位置调整机构. 《机械工程师》.
195. 危荃，金翠娥，周建平，周正干，孙广开（2016）. 空气耦合超声技术在航空航天复合材料无损检测中的应用. 《无损检测》.
196. 周建平，金翠娥，金牛牛（2015）. 镁合金铸造筒体的X射线数字成像检测. 《无损检测》.
197. 郑爱武，周建平（2014）. 直接再入大气的月地返回窗口搜索策略. 《航空学报》.
198. 王飞，周建平，涂俊，王业伟（2014）. 纤维缠绕复合材料气瓶声发射检测技术研究. 《航天制造技术》.
199. 李来平，周建平，危荃（2014）. 基于相控阵超声的铝合金熔焊缝缺陷深度定位技术研究. 《宇航材料工艺》.
200. 何强，周建平，章翔峰，许燕（2013）. 短电弧机床数控脉冲电源的研制. 《机械工程与自动化》.
201. 杨书营，迟建国，曹炜，许军，朱广飞，周建平（2013）. 船用柴油机气缸盖铸造工艺设计优化. 《2013(第23届)重庆市铸造年会》.
202. 白小宝，孙建罡，周建平，周莉，江运喜（2013）. 超声相控阵技术检测蜂窝复合材料案例. 《无损检测》.
203. Jianping Zhou, Yan Xu, Qiang He, Zhou Bisheng (2013). The NC Power Supply Design of Large Current and Wide Frequency Pulse in SEAM. TELKOMNIKA Indonesian Journal of Electrical Engineering.DOI
204. 周建平，曹炜，翟中波，杨书营，何荣曦，许军（2012）. 柴油机曲轴平衡块的工艺探索. 《2012(第22届)重庆市铸造年会论文集》.
205. 李家文，李道奎，周建平（2011）. 发动机谐振与箭体模态耦合稳定性及机理研究. 《航空学报》.
206. 周建平，杨飞，万天明（2011）. 瀑布沟水电站大型圆筒阀导向条安装与焊接优化研究. 《焊接技术》.
207. 杜培富，林森明，周建平，张建成（2011）. 基于二维工程图文件的Pro/E三维建模. 《机械工程与自动化》.
208. 马博，梁楚华，周建平（2011）. 基于MATLAB的短电弧加工工艺模型回归分析与研究. 《机械工程与自动化》.
209. 周建平（2011）. PROFIBUS通讯在热处理设备中的应用. 《中国仪器仪表》.
210. 周建平，杜涛，陈玉春，梁振欣，黄兴鲁（2011）. 冷却剂/氧化剂组合式SteamJet发动机特性. 《推进技术》.
211. 李文刚，梁楚华，周建平，李西坤（2010）. 基于F020的运动控制卡系统设计. 《机械工程与自动化》.
212. 杨璇，周建平，梁楚华，张传宇，许燕（2010）. T型管自动焊接机床焊接轨迹规划与运动控制. 《铸造技术》.
213. 童科伟，周建平，何麟书（2009）. 稀疏拟谱最优控制法求解Goddard火箭问题. 《固体火箭技术》.
214. 周碧胜，梁楚华，周建平（2009）. 短电弧切削技术的应用. 《第九届中国铸造科工贸大会》.
215. 罗陈，周建平，汪文元（2009）. 瀑布沟水电站分瓣转轮工地组装焊接技术. 《水电站机电技术》.
216. 童科伟，周建平，何麟书（2008）. Legendre-Gauss拟谱法求解最优控制问题. 《航空学报》.
217. 王雅娟，梁楚华，周建平（2007）. 焊缝曲线的数学模型及其仿真. 《机械工程师》.
218. 蒋志刚，曾首义，周建平（2007）. 刚性尖头弹侵彻有限厚度金属靶板分析模型. 《兵工学报》.
219. 蒋志刚，曾首义，周建平（2007）. 中等厚度金属靶板的三阶段贯穿模型. 《兵工学报》.
220. 曹永峰，梁楚华，周建平，滕文静（2006）. 短电弧数控车床运动控制卡的设计. 《机械工程与自动化》.
221. 杨中元，周建平（2006）. 超音速火焰喷涂CoCrW涂层的性能研究. 《中国表面工程》.
222. 孙勇，朱卫忠，周建平（2005）. 用于金属针布钢丝球化退火的罩式炉. 《金属热处理》.
223. 谢燕，雷勇军，周建平，唐国金（2005）. 惯导减振系统结构参数的优化. 《强度与环境》.
224. 吴非，雷勇军，周建平，蒙上阳（2005）. 强激光辐照下圆柱薄壳非线性振动分析. 《强度与环境》.
225. 肖万伸，周建平，刘又文（2004）. 粘弹塑性界面的断裂特性. 《固体火箭技术》.
226. 蒋志刚，曾首义，周建平（2004）. 刚性尖头弹侵彻贯穿金属薄靶板耗能分析. 《兵工学报》.
227. 雷勇军，唐国金，卓曙君，周建平（2003）. 复合材料圆柱壳失稳载荷的振动监测. 《实验力学》.
228. 张海联，周建平（2003）. 基于粘弹性随机有限元的固体推进剂药柱可靠性分析. 《固体火箭技术》.
229. 李道奎，周建平，雷勇军（2003）. 含内埋圆形或椭圆形脱层复合材料层合板的屈曲分析. 《固体力学学报》.
230. 祁文军，方建疆，周建平（2003）. 基于焊接CCT图的焊接接头组织和性能预测. 《焊接技术》.
231. 李道奎，周建平（2002）. 含环向贯穿脱层的轴压圆柱层壳屈曲分析:I——基本方程与定解条件. 《复合材料学报》.
232. 彭威，周建平，赵维昌，蒙上阳（2002）. 复合固体推进剂应力分布的数值模拟及损伤萌生分析. 《固体火箭技术》.
233. 刘甫，唐国金，周建平（2002）. 药柱结构完整性分析模型参数的确定. 《上海航天(中英文)》.
234. 肖万伸，唐国金，周建平（2002）. 双材料界面裂纹的弹塑性问题. 《固体火箭技术》.
235. 李道奎，周建平（2002）. 含环向贯穿脱层的轴压圆柱层壳屈曲分析:II——算例分析. 《复合材料学报》.
236. 刘志东，周建平（2001）. 线切割加工放电电流阶梯波脉冲电源的设计. 《2001年中国机械工程学会年会暨第九届全国特种加工学术年会论文集》.
237. 李海阳，雷勇军，周建平（2001）. 一维分布参数系统的数值传递函数方法. 《强度与环境》.
238. 张海联，周建平（2001）. 固体推进剂药柱泊松比随机粘弹性有限元分析. 《推进技术》.
239. 张海联，周建平（2001）. 固体火箭发动机药柱随机结构分析及其相关函数研究. 《固体火箭技术》.
240. 李海阳，雷勇军，周建平（2001）. 分布传递函数方法的梁杆几何非线性分析. 《强度与环境》.
241. 张海联，周建平（2001）. 固体推进剂药柱松弛模量随机粘弹性有限元分析. 《推进技术》.
242. 张海联，周建平（2001）. 固体推进剂药柱的近似不可压缩粘弹性增量有限元法. 《固体火箭技术》.
243. 欧阳勇，任钧国，周建平（2001）. 随机材料板结构的传递函数分析方法. 《强度与环境》.
244. 彭威，周建平，任均国，邓守春（2000）. 复合固体推进剂颗粒相互作用的增强效应分析. 《固体火箭技术》.
245. 彭威，周建平（2000）. 弹性连杆复合机构的灵敏度分析. 《强度与环境》.
246. 韩小云，周建平（2000）. 新增表面等效作用力模拟固体推进剂裂纹动态扩展. 《推进技术》.
247. 彭威，周建平（2000）. 凸轮弹性连杆复合机构的动力学修改. 《强度与环境》.
248. 彭威，任均国，周建平（2000）. 复合固体推进剂脱湿模型的研究. 《固体火箭技术》.
249. 雷勇军，李海阳，周建平（2000）. 变厚度圆锥壳的传递函数解. 《强度与环境》.
250. 彭威，任均国，周建平（1999）. 复合推进剂线粘弹本构方程的细观力学分析(Ⅰ)球形颗粒增强效应分析. 《推进技术》.
251. 韩小云，周建平（1999）. 固体推进剂裂纹燃烧扩展耦合的基本模式. 《推进技术》.
252. 袁杰红，唐国金，周建平，宋先村（1999）. 断裂力学在推进剂贮箱安全评定中的应用. 《强度与环境》.
253. 雷勇军，李海阳，周建平（1999）. 复合材料圆锥壳稳定性分析的传递函数法. 《国防科技大学学报》.
254. 雷勇军，李海阳，周建平（1999）. 复合材料组合梁的分布参数传递函数法分析模型. 《国防科技大学学报》.
255. 李海阳，周建平，冯志刚（1999）. 变截面梁的传递函数近似解法. 《强度与环境》.
256. 彭威，周建平，任均国（1999）. 复合固体推进剂非线性粘弹本构方程的微观力学分析. 《固体火箭技术》.
257. 雷勇军，周建平，卓曙君（1998）. 轴压复合材料组合梁的振动与稳定性相关性研究. 《复合材料学报》.
258. 韩小云，周建平（1998）. 固体推进剂燃烧断裂边界二维流场特性. 《推进技术》.
259. 冯志刚，周建平（1998）. 矩形变截面梁横向振动自振频率的传递函数渐近解法. 《强度与环境》.
260. 韩小云，周建平（1998）. 固体药柱燃烧断裂边界一维流场特性. 《推进技术》.
261. 唐国金，周建平（1998）. 裂纹梁的线弹簧模型. 《兵工学报》.
262. 冯志刚，周建平（1997）. 一维非均匀变截面结构瞬态响应的传递函数渐近解法. 《强度与环境》.
263. 韩小云，周建平（1997）. 固体推进剂裂纹对流燃烧和扩展的研究分析. 《推进技术》.
264. 黄放，董芳，周建平，杨勤（1995）. 酯硬水玻璃砂立式连续混砂机的研制. 《铸造设备与工艺》.
265. 唐国金，周建平（1994）. 自由装填药柱的结构完整性分析. 《固体火箭技术》.
266. 项久玉，周建平（1988）. 脱氧铜包铁线生产新工艺. 《机械工程材料》.
267. 周承倜，周建平（1986）. 多层复合材料圆柱壳的非线性失稳计算. 《应用数学和力学》.
268. 周承倜，周建平（1985）. 复合材料圆柱壳的非线性稳定性分析. 《复合材料学报》.

预印本

1. Bo Wang, Yan Ze Xu, Jianping Zhou, Guan Zhang, Wei Tang, Bin Liu, Longhao Pei, Jiangtao Hu, Shunhao Wang, Guangrui Wen (2026). Low-voltage micro-arc discharge–grinding hybrid machining (LV-MADG) of Inconel 718: discharge-state stabilization and surface integrity. SSRN Electronic Journal.DOI
2. Feibiao Yu, Jiaqi Cao, Baozhen Yang, Jianping Zhou, Zhendong Zhong, Z Y Miao (2026). Machine-learning-assisted Pareto screening of hardness and corrosion resistance in as-cast AlCoCrFeNi-X high-entropy alloys with microstructural correlations. SSRN Electronic Journal.DOI
3. Lei Xia, Jianping Zhou, Ruilei Xue, Xiaojuan Li, Tongwei Ma, Yong Jun Shen (2023). Real-Time Tracking of Welding Torch Height in Gmaw Process of Welding Robot Based on Passive Vision Sensing. SSRN Electronic Journal.DOI