徐光

期刊论文

1. 丁霄鹏，胡海江，甘晓龙，徐光，薛正良（2026）. 淬火温度对42CrMo轴承钢回火组织及力学性能的影响. 《材料热处理学报》.DOI
2. 肖雅倩，曾武，庞厚君，王运峰，徐光，田俊羽（2026）. 冷却温度和轧制温度对超低硅碳钢变形抗力与相变组织的影响. 《金属热处理》.DOI
3. 严杰，田俊羽，龚渝超，黄为，叶哲旭，徐光（2026）. 新型奥氏体化工艺对GCr15轴承钢相变和组织性能的影响. 《钢铁》.
4. 龚渝超，田俊羽，严杰，汪学军，赵司阳，肖芷怡，徐光（2026）. 奥氏体化温度对20CrNiMo轴承钢不同复合相区相变行为及组织性能的影响. 《钢铁》.
5. 殷昊辉，刘曼，甘晓龙，徐光（2026）. 锰硫比对超低碳钢夹杂物和导电率的影响. 《钢铁钒钛》.
6. 孙昌政，许立雄，柳会梅，熊俊伟，胡海江，徐光（2026）. 热处理脱碳对中碳合金钢表层组织和显微硬度的影响. 《物理测试》.DOI
7. 陈正坤，刘曼，殷昊辉，徐光（2026）. 退火工艺对冷变形超低碳钢组织与性能演变的影响. 《武汉科技大学学报》.
8. Kun Liu, Xiaolong Gan, wang wenjun, Bin Liu, Ziliu Xiong, Yang Yang, Guang Xu (2026). Effect of coiling temperature on microstructure and properties of 750 MPa Nb–Cr composite microalloyed steel. Journal of Materials Research and Technology.DOI
9. Ya-Qian Xiao, Jun-Yu Tian, Xiaolong Gan, Haijiang Hu, Ming-Xing Zhou, Guang Xu (2026). Effect of combining below-MS austempering with ausforming on transformation and microstructure-property in a medium carbon bainitic steel. Journal of Iron and Steel Research International.DOI
10. J W Zhang, Mingxing Zhou, Junyu Tian, Sheng Liu, Houxin Wang, Guang Xu (2026). Effect of reheating temperature on the microstructure and mechanical properties of hot-deformed Nb and Nb/V microalloyed high-carbon pearlite steels. Journal of Materials Research and Technology.DOI
11. Wanjie Zheng, Juan Xiao, Xian Li, Qinpan Yuan, Guang Xu, Junyu Tian (2026). Effect of deformation process on transformation and microstructure of low carbon containing Nb microalloy steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
12. Ya-Lin Liang, Ming-Xing Zhou, Xiao-Long Gan, Jun-Yu Tian, Zhen-Ye Chen, Guang Xu (2026). Improvement in mechanical properties of low-carbon carbide-free bainite steel by below-Ms austempering and two-step austempering. Journal of Iron and Steel Research International.DOI
13. Qi Zhang, Guanghui Chen, Nuoteng Xu, Guang Xu, Xiangliang Wan, Fuqiang Lv, Guoqing Luan, Junyu Tian (2026). Study on the Deformation Behavior of Lightweight Stainless Steels: Role of Al and Solution Treatment. Metals and Materials International.DOI
14. Yang Yang, Xiao‐Long Gan, Wen-Jun Wang, Zi‐Liu Xiong, Bin Liu, Kun Liu, Guang Xu (2026). Investigation of Phase Transformation Behavior and Strengthening Mechanisms in a Nb–Ti Microalloyed High‐Strength Steel. steel research international.DOI
15. Nuoteng Xu, Hang Zou, Xue Su, Guang Xu (2026). The Rapid Tempering Behaviors of a Low‐Carbon Bainitic Pipeline Steel With Two Strength Grades. steel research international.DOI
16. Linlin Bao, Le Xiong, Qingxiao Zhang, Wen Jie Liang, Xiaolong Li, Guang Xu, Shaobai Sang, Qing Yuan (2026). Tailoring Microstructure and Strength Contribution in a Mo–Nb–Ti Tempering Steel via Controlled Coiling and Tempering Temperatures. steel research international.DOI
17. Linlin Bao, Qing Yuan, Le Xiong, Wen Liang, Qingxiao Zhang, Shaobai Sang, Xiaolong Li, Guang Xu (2026). Microstructure and Strength in Nb-Ti Tempering Steel: The Role of Coiling and Tempering Temperatures. Journal of Materials Engineering and Performance.DOI
18. Wei Huang, Junyu Tian, Juan Xiao, Qinpan Yuan, Haijiang Hu, Qi Zhang, Xiaolong Gan, Guang Xu (2026). A quantitative analysis of transformation, microstructure and properties of a low-carbon Nb-microalloyed steel for building after deformation. Journal of Materials Research and Technology.DOI
19. 陈志辉，甘晓龙，徐光，薛正良，田浩，李德胜（2025）. 等温球化退火时间对GCr15轴承钢组织性能的影响. 《材料热处理学报》.
20. 郑万杰，庞厚君，曾武，王运峰，徐光，田俊羽（2025）. 轧制工艺对低碳微Nb钢变形抗力及其模型的影响研究. 《钢铁钒钛》.
21. 李彦龙，刘曼，孙林宇，吴俊辉，甘晓龙，徐光（2025）. HB550级低合金马氏体耐磨钢滑动磨损行为. 《钢铁钒钛》.
22. 刘曼，周明星，陈振业，尹伟凡，徐光（2025）. 中碳高硅Q&P钢马氏体相变动力学. 《钢铁》.DOI
23. 吴俊辉，官计生，刘曼，孙林宇，李彦龙，徐光（2025）. HB500低合金高强耐磨钢组织和性能. 《钢铁》.DOI
24. 曾武，田俊羽，庞厚君，郑万杰，王运峰，徐光（2025）. 硅含量和加热温度对低碳钢氧化行为的影响. 《钢铁》.DOI
25. 童善康，王威，甘晓龙，薛正良，田浩，李德胜，徐光（2025）. 盾构机用轴承钢热轧和球化退火过程中的组织演变及力学性能. 《金属热处理》.DOI
26. 徐光，齐江华，李阳，姜周华（2025）. 镁在钢中溶解度的计算与试验测定. 《炼钢》.
27. 杨雯蕊，薛正良，田浩，肖爱平，刘东明，徐光（2025）. 盾构机主轴承圆柱滚子用轴承钢中钛夹杂析出与控制. 《炼钢》.
28. 刘曼，左洋，陈冉婷，周子钰，聂子鹏，庞硕，徐光（2025）. 渗硼-等温淬火一体化工艺制备高性能贝氏体钢的组织和性能研究. 《热加工工艺》.
29. 童善康，刘坤，甘晓龙，田浩，薛正良，李德胜，徐光（2025）. 淬火回火工艺对大型盾构机用轴承钢组织性能的影响研究. 《中国材料大会2025论文汇编》.DOI
30. 孙林宇，刘曼，吴俊辉，李彦龙，徐光（2025）. 在线淬火低合金高强马氏体耐磨钢滑动磨损性能. 《摩擦学学报(中英文)》.DOI
31. Qiang Long, Guang Xu, Songyang Chen, Min Song, Y. Mansurov, Zhangwei Wang (2025). Martensitic twin formation mechanisms and work hardening in TiZrHfTa refractory high-entropy alloys. Tungsten.DOI
32. Qi Zhang, Jun Wang, Mingxing Zhou, Man Liu, Xiaolong Gan, Guang Xu (2025). Review on the Microalloying of Niobium, Vanadium, and Titanium in High‐Carbon Steels. steel research international.DOI
33. Le Xiong, Qingxiao Zhang, Jie Ren, Haijiang Hu, Xiaolong Li, Guang Xu, Qing Yuan (2025). Interaction of heating temperature and rate inducing abnormal grain growth in a novel Ti–Mo martensitic steel. Journal of Materials Research and Technology.DOI
34. Wu Zeng, Houjun Pang, Yunfeng Wang, Wanjie Zheng, Guang Xu, Junyu Tian (2025). Study on the Deformation Resistance and Microstructure of Interstitial Free Steel under Different Rolling Processes. Journal of Materials Engineering and Performance.DOI
35. Nuoteng Xu, Guanghui Chen, Guoqing Luan, F. Lv, Qi Zhang, Haijiang Hu, Guang Xu (2025). Impact of Al and Mn Addition on Microstructure and Mechanical Properties of Lightweight Stainless Steel. steel research international.DOI
36. Nuoteng Xu, Guanghui Chen, Qi Zhang, Haijiang Hu, Guang Xu (2025). Study on the Deformation Behavior and Mechanical Properties of Lightweight Economic Stainless Steels with Varying Al and Mn Contents. Journal of Manufacturing and Materials Processing.DOI
37. Ruimin Wang, Guanghui Chen, Nuoteng Xu, Linyu Sun, Junhui Wu, Guang Xu (2025). Impact of High Contact Stress on the Wear Behavior of U75VH Heat-Treated Rail Steels Applied for Turnouts. Metals.DOI
38. Ruimin Wang, Guanghui Chen, Nuoteng Xu, Zhihui Chen, Min Hua Zhu, Guang Xu (2025). Synergistic behavior of salt spray corrosion and fatigue wear of U75VH pearlite heat-treated rail. Materials Today Communications.DOI
39. Jun Wang, Man Liu, Haijiang Hu, Guang Xu (2025). Modeling of Solubility Product of TiN in Ti‐Microalloyed Steels. steel research international.DOI
40. Zhihui Chen, Xiaolong Gan, Man Liu, Zhengliang Xue, Hao Tian, Desheng Li, Guang Xu (2025). Deformation-induced pearlite transformation and spheroidization of bearing steel for new energy vehicles. Journal of Materials Research and Technology.DOI
41. Xue Su, Mingxing Zhou, Min Zhu, Houxin Wang, W.M. Yin, Junyu Tian, Guang Xu, Zhenye Chen, Caidong Zhang, Jiarui Guo, Jie Li, Shuai Ren (2025). On the Isothermal Pearlite Transformation Kinetics of High‐Carbon Hypoeutectoid Steels Affected by Nb Microalloying. steel research international.DOI
42. Kaiyuan Yu, Mingxing Zhou, Min Zhu, Houxin Wang, Zhenye Chen, W.M. Yin, Xue Su, Junyu Tian, Guang Xu (2025). Comparative study on the effects of Nb and V on the nucleation and growth of pearlite in high-carbon steels using in-situ method. Journal of Materials Research and Technology.DOI
43. Siyang Zhao, Man Liu, Junhui Wu, Linyu Sun, Guang Xu, W.M. Yin (2025). Sliding wear behaviors of medium-carbon high-strength bainitic steel treated by boro-austempering treatment. Engineering Failure Analysis.DOI
44. 伍伟，袁清，莫家璇，任杰，张志成，徐光（2024）. 低碳汽车齿轮钢20CrMnTi伪渗碳过程晶粒粗化行为. 《金属热处理》.
45. 张琪，沈逸平，陈光辉，薛正良，徐光（2024）. 固溶温度对Fe-30Mn-8Al-0.8C低密度钢组织及力学性能的影响. 《钢铁》.
46. 周明星，陈振业，田俊羽，蔡锋，薛正良，徐光（2024）. 应力作用下的贝氏体相变动力学模型研究. 《钢铁研究学报》.
47. 徐光，齐江华，马英建，彭志贤，黄峰，刘静（2024）. Mg处理对高碳工具钢75Cr1热轧组织及力学性能的影响. 《炼钢》.
48. 高鸿烨，周民，林鹏，赵司阳，袁清，徐光（2024）. Mn含量对热轧螺纹钢连续冷却相变行为影响研究. 《武汉科技大学学报》.
49. Li-bo Wang, X. Wan, Chen Hu, Guang Xu, Guang-qiang Li (2024). High-temperature confocal laser scanning microscopy analysis of phase transformation of steels: a review. Journal of Iron and Steel Research International.DOI
50. Siyang Zhao, Man Liu, Junyu Tian, Fangqin Dai, Guang Xu (2024). Review on Heat Treatment and Surface Modification Technology of High‐Strength Bainite Steels. steel research international.DOI
51. Qi Zhang, Guanghui Chen, Yuemeng Zhu, Zhengliang Xue, Guang Xu (2024). Effects of heating temperature and atmosphere on element distribution and microstructure in high-Mn/Al austenitic low-density steel. International Journal of Minerals Metallurgy and Materials.DOI
52. Qi Zhang, Guanghui Chen, Haijiang Hu, Wanjie Zheng, Xiangliang Wan, Zhengliang Xue, Guang Xu (2024). Temperature dependence of the deformation behavior and mechanical properties of a Fe–Mn–Al–C low-density steel for cryogenic application. Journal of Materials Research and Technology.DOI
53. Si-yang Zhao, Man Liu, Guang Xu, Jia-hui Zou, Bin Tang, Junyu Tian, Haijiang Hu, Fang-qin Dai (2024). Microstructure and properties of borided layer on medium-carbon high-strength bainitic steel treated by boro-austempering treatment. Journal of Iron and Steel Research International.DOI
54. Jun Wang, Haijiang Hu, Man Liu, Guang Xu (2024). Effects of solute alloying elements on solid solubility of TiC in austenite. Materials Today Communications.DOI
55. Jiahui Zou, Lei Fan, Qinpan Yuan, Juan Xiao, Guang Xu, Junyu Tian (2024). Study on the heating process, high temperature mechanical properties and fatigue properties of a low-carbon microalloyed steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
56. Junhui Wu, Man Liu, Linyu Sun, Yanlong Li, Fangqin Dai, Guang Xu (2024). Sliding wear behaviors of low alloy high strength martensite wear-resistant steels. Wear.DOI
57. Jiaxuan Mo, Qing Yuan, Wenping Liang, Zhicheng Zhang, Haijiang Hu, Guang Xu (2024). Effect of the Normalizing Temperature on the Size and Homogeneity of Austenite Grain in 20CrMnTi Carburized Gear Steel. Arabian Journal for Science and Engineering.DOI
58. Qing Yuan, Le Xiong, Wenping Liang, Ning Liu, Zhongbo Li, Guang Xu (2024). Experimental study on single value fluctuation of impact work in 700 MPa low-alloy tempering plate. Journal of Materials Research and Technology.DOI
59. Qi Zhang, Guanghui Chen, Zhengliang Xue, Zheng-kun Chen, Guang Xu (2024). Correlation between grain size, mechanical properties and deformed microstructure of Fe–20Mn–6Al–0.6C–0.15Si low-density steel. Journal of Iron and Steel Research International.DOI
60. Jun Wang, Man Liu, Lifan Wang, Ping He, Haijiang Hu, Guang Xu (2024). Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel. Materials.DOI
61. Yajun Liu, Xiaolong Gan, Shuize Wang, Liang Liang, Yaowen Xu, Guang Xu, Man Liu (2024). Effect of partitioning treatment on the strengthening and plasticising mechanism of one-step quenching and partitioning steels. Journal of Materials Research and Technology.DOI
62. Qing Yuan, Jiaxuan Mo, Jie Ren, Wenping Liang, Guang Xu (2024). A detailed exploration of microstructure evolution in a novel Ti–Mo martensitic steel through in-situ observation: The effect of heating rate. Journal of Materials Research and Technology.DOI
63. Yajun Liu, Junyu Tian, Man Liu, Xiaolong Gan, Sheng Liu, Guang Xu (2024). Effect of isothermal martensite and bainite transformation on microstructure and properties in a medium-carbon high-strength Q&P steel. Journal of Iron and Steel Research International.DOI
64. En Tang, Qing Yuan, Rui Zhang, Jie Ren, Zhongbo Li, Guang Xu (2024). Rapid heat treatment yields excellent strength and ductility balance in a wear-resistant steel. Journal of Materials Research and Technology.DOI
65. Qi Zhang, Junyu Tian, Min Zhu, Houxin Wang, Xue Su, Guang Xu, Mingxing Zhou (2024). Effects of Nb on dynamic recrystallization kinetics and pearlite transformation in high-carbon rail steels. Materials Science and Engineering A.DOI
66. Ping He, Haijiang Hu, Wei Wang, Lifan Wang, Guang Xu (2024). On the correlation among isothermal transformation, interphase precipitation behaviour and elements partitioning in Ti–Mo microalloyed steel. Journal of Materials Research and Technology.DOI
67. 王周头，袁清，张庆枭，刘升，徐光（2023）. 冷轧中碳梯度马氏体钢的组织与力学性能. 《金属学报》.
68. 沈逸平，张琪，陈光辉，袁清，薛正良，徐光（2023）. Fe-30Mn-8Al-0.8C奥氏体低密度钢变形中组织演变及变形机制. 《钢铁》.
69. 邹航，刘曼，田俊羽，徐光（2023）. 快速回火工艺条件下超高强低碳贝氏体钢的组织与性能. 《金属热处理》.
70. 任杰，袁清，莫家璇，张志成，唐恩，徐光（2023）. 快速加热对低碳微合金钢相变和微观组织的影响. 《武汉科技大学学报》.
71. 徐光，罗钢，陈奎，李阳（2023）. V微合金化对高强弹簧钢静态相变和拉伸性能的影响. 《材料与冶金学报》.
72. Qi Zhang, Guanghui Chen, Yiping Shen, Zhengliang Xue, Guang Xu (2023). Microstructure Evolution on the Surface of Fe-20Mn-6Al-0.6C-0.15Si Austenitic Low-Density Steel during Heat Treatment. Journal of Materials Engineering and Performance.DOI
73. Qing Yuan, Jie Ren, En Tang, Zhongbo Li, Jiaxuan Mo, Siyang Zhao, Guang Xu (2023). Rapid annealing of an ultralow carbon steel: in-depth exploration of the microstructure-mechanical properties evolution. Journal of Materials Research and Technology.DOI
74. Qing Yuan, Zhongbo Li, Qingxiao Zhang, Guang Xu (2023). Towards excellent strength-ductility synergy via high temperature short time annealing in low-carbon ultrafine grain steel. Materials Science and Engineering A.DOI
75. Lifan Wang, Haijiang Hu, Wei Wang, Ping He, Zhongbo Li, Guang Xu (2023). Analysis on the Key Parameters to Predict Flow Stress during Ausforming in a High-Carbon Bainitic Steel. Metals.DOI
76. Rui Zhang, Qing Yuan, En Tang, Jiaxuan Mo, Zhicheng Zhang, Haijiang Hu, Guang Xu (2023). Role of Precipitates on the Grain Coarsening of 20CrMnTi Gear Steel during Pseudo-Carburizing. Metals.DOI
77. Mingxing Zhou, Houxin Wang, Min Zhu, Junyu Tian, Xue Su, Qi Zhang, Aimin Guo, Guang Xu (2023). New insights to the metallurgical mechanism of niobium in high-carbon pearlitic steels. Journal of Materials Research and Technology.DOI
78. En Tang, Qing Yuan, Rui Zhang, Zhicheng Zhang, Jiaxuan Mo, Wenping Liang, Guang Xu (2023). On the grain coarsening behavior of 20CrMnTi gear steel during pseudo carburizing: A comparison of Nb-Ti-Mo versus Ti-Mo microalloyed steel. Materials Characterization.DOI
79. Mingxing Zhou, Junyu Tian, Wei Wang, Jun Wu, Zhengliang Xue, Guang Xu (2023). Bainite transformation under the effect of large stress in a carbide-free bainite steel. Journal of Materials Research and Technology.DOI
80. Zhongbo Li, Qing Yuan, Shaopu Xu, Yang Min Zhou, Sheng Liu, Guang Xu (2023). In Situ Observation of the Grain Growth Behavior and Martensitic Transformation of Supercooled Austenite in NM500 Wear-Resistant Steel at Different Quenching Temperatures. Materials.DOI
81. Xue Su, Mingxing Zhou, Min Zhu, Houxin Wang, Qi Zhang, Junyu Tian, Guang Xu (2023). Microstructure and mechanical properties of Nb microalloyed high‑carbon pearlitic steels subjected to isothermal transformation. Materials Characterization.DOI
82. Yajun Liu, Xiaolong Gan, Wen Liang, Guang Xu, Jianghua Qi, Man Liu (2023). Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures. Materials.DOI
83. Man Liu, Michael Bernhard, Monika KAWULOKOVÁ, Josef Walek, Maximilian Kern, Simona Zlá, Peter Presoly, Bedřich Smetana, Markéta Tkadlečková, Guang Xu, Youn‐Bae Kang, Christian Bernhard (2023). Decomposition of γ-Fe in 0.4C–1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: A comparative study using in-situ HT-LSCM, DSC and dilatometry. Journal of Materials Research and Technology.DOI
84. Yajun Liu, Xiaolong Gan, Shuize Wang, Hailin Yang, Yanqi Li, Guang Xu (2023). Effect of Coiling Temperature on Microstructure and Properties of a Ti–Nb Microalloyed High‐Speed Guardrail Steel. steel research international.DOI
85. Man Liu, Haijiang Hu, Maximilian Kern, Bernd Lederhaas, Guang Xu, Christian Bernhard (2023). Effect of integrated austempering and Q&P treatment on the transformation kinetics, microstructure and mechanical properties of a medium-carbon steel. Materials Science and Engineering A.DOI
86. Qing Yuan, Jie Ren, Jiaxuan Mo, Zhicheng Zhang, En Tang, Guang Xu, Zhengliang Xue (2023). Effects of rapid heating on the phase transformation and grain refinement of a low-carbon mciroalloyed steel. Journal of Materials Research and Technology.DOI
87. 张琪，王厚昕，朱敏，苏雪，周明星，徐光（2022）. Nb微合金化高碳钢奥氏体晶粒长大原位观察. 《钢铁研究学报》.
88. 韩理，胡海江，王巍，王俊，徐光（2022）. 低于Ms温度变形对等温贝氏体相变动力学和组织的影响. 《钢铁研究学报》.
89. 蔡锋，刘曼，徐光（2022）. 表面高硬度和耐腐蚀性高强贝氏体钢制备新工艺. 《钢铁》.
90. 苏雪，王厚昕，朱敏，张琪，田俊羽，徐光（2022）. 原位观察铌对高碳钢珠光体相变的影响. 《钢铁》.
91. 王瑞敏，刘曼，周剑华，张琪，苏雪，徐光（2022）. R350HT钢轨钢的连续冷却转变曲线. 《金属热处理》.
92. 蔡锋，田俊羽，胡海江，周明星，徐光（2022）. AM对低碳贝氏体钢等温相变和显微组织的影响. 《钢铁研究学报》.
93. 官计生，刘曼，徐光（2022）. 配分工艺对中碳Ti-Mo高强Q&P钢组织和性能的影响. 《钢铁研究学报》.
94. 樊雷，肖娟，李显，杨跃标，田俊羽，徐光（2022）. 应变速率对Q460连铸坯高温力学性能的影响. 《钢铁研究学报》.
95. Qingxiao Zhang, Wei Wang, Qing Yuan, Zhoutou Wang, Zhicheng Zhang, Guang Xu (2022). Effect of Niobium on the Thermal Stability and Mechanical Properties of a Low-Carbon Ultrafine Grain Steel. Metals and Materials International.DOI
96. Xue Su, Guang Xu, Min Hua Zhu, Qi Zhang, Feng Cai, Man Liu (2022). Investigation on the interaction between corrosion and wear of U68CuCr rail steel with different corrosion periods. Wear.DOI
97. Zhoutou Wang, Qing Yuan, Zhicheng Zhang, Qingxiao Zhang, Guang Xu (2022). Influence of Cementite Precipitation on Work Hardening Behavior in Ultrafine Grain Steels Rolled at Room and Cryogenic Temperatures. Metals.DOI
98. Junyu Tian, Wei Wang, Guang Xu, Xiang Wang, Mingxing Zhou, Hatem S. Zurob (2022). Microstructure and Properties of a Low Carbon Bainitic Steel Produced by Conventional and Inverted Two-Step Austempering Processes. Metals and Materials International.DOI
99. Zhirui Wei, Wei Wang, Man Liu, Junyu Tian, Guang Xu (2022). Comparison of wear performance of bainitic and martensitic structure with similar fracture toughness and hardness at different wear conditions. Wear.DOI
100. Zhen Cai, Xiaolong Gan, Yanqi Li, Sheng Liu, Siqian Bao, Guang Xu (2022). Influences of Strain on the Microstructure and Mechanical Properties of High-Carbon Steel. Metals.DOI
101. Guanghui Chen, Guang Xu, Horst Biermann, Javad Mola (2022). Microstructure and mechanical properties of Co-added and Al-added austenitic stainless steels. Materials Science and Engineering A.DOI
102. Hang Zou, Man Liu, Lei Fan, Qinpan Yuan, Guang Xu (2022). Effects of Rolling and Coiling Temperatures on Transformation Kinetics, Microstructure, and Properties of a Low-Carbon Bainitic Pipeline Steel. Journal of Testing and Evaluation.DOI
103. Man Liu, Junyu Tian, Feng Cai, Chenggang Pan, Guang Xu (2022). Chro-austempering treatment of a medium-carbon high-strength bainitic steel. Journal of Iron and Steel Research International.DOI
104. Feng Cai, Mingxing Zhou, Junyu Tian, Guang Xu (2022). Comparative study of the role of niobium in low-carbon ferritic and bainitic steels. Materials Science and Engineering A.DOI
105. Zhirui Wei, Xiaolong Gan, Haijiang Hu, Junyu Tian, Mingxing Zhou, Guang Xu (2022). Effect of High‐Temperature Deformation on Bainite Transformation of a Low‐Carbon Bainite Steel. steel research international.DOI
106. Mingxing Zhou, Gang Liu, Junyu Tian, Hao Zhang, Feng Cai, Guang Xu (2022). Microstructure and Crystallography of a Carbide-Free Bainite Steel Under the Effect of Stress. Metallurgical and Materials Transactions A.DOI
107. Haijiang Hu, Imed-Eddine Benrabah, Guang Xu, Junyu Tian, Mingxing Zhou, Yves J. M. Brechet, Hatem S. Zurob (2022). Effect of temperature, carbon content and crystallography on the lengthening kinetics of bainitic ferrite laths. Materials Characterization.DOI
108. Guanghui Chen, Reza Rahimi, Michael Harwarth, Mykhaylo Motylenko, Guang Xu, Horst Biermann, Javad Mola (2022). Non-cube-on-cube orientation relationship between M23C6 and austenite in an austenitic stainless steel. Scripta Materialia.DOI
109. Wenze Yan, Xiang Yan Luo, Guang Xu, Honghong Wang, Zidong Wang, Xiaohua Chen (2022). Significant improvement in CGHAZ toughness of HSLA steel via welding with trailing mechanical treatment. Materials Science and Engineering A.DOI
110. Jisheng Guan, Qing Yuan, Qi Zhang, Wenwei Qiao, Guang Xu (2022). Simultaneous Enhancement of Strength and Toughness in a Medium-Carbon Martensitic Steel by Ti-Mo Addition. Journal of Materials Engineering and Performance.DOI
111. Yuemeng Zhu, Qi Zhang, Qing Yuan, Jisheng Guan, Yuebiao Yang, Guang Xu (2022). Effects of Tempering Temperature on the Microstructure, Strength, and Toughness of Medium-Carbon Ti–Mo-Bearing Martensitic Steel. Arabian Journal for Science and Engineering.DOI
112. Junyu Tian, Houxin Wang, Min Zhu, Mingxing Zhou, Qi Zhang, Xue Su, Aimin Guo, Guang Xu (2022). Improving mechanical properties in high-carbon pearlitic steels by replacing partial V with Nb. Materials Science and Engineering A.DOI
113. Zhirui Wei, Haijiang Hu, Man Liu, Junyu Tian, Guang Xu (2022). Effect of Austempering below and above Ms on the Microstructure and Wear Performance of a Low-Carbon Bainitic Steel. Metals.DOI
114. 刘曼，胡海江，田俊羽，徐光（2021）. 变形对超高强贝氏体钢组织和力学性能的影响. 《金属学报》.
115. 刘曼，胡海江，田俊羽，陈光辉，徐光（2021）. 贝氏体钢等温淬火和淬火-配分复合工艺. 《钢铁》.DOI
116. 陈光辉，徐光，胡海江，刘曼，陈鑫（2021）. 1.6GPa级中碳高强贝氏体钢残余奥氏体调控机理. 《钢铁》.DOI
117. 邹航，刘曼，徐光（2021）. 轧后冷却条件对低碳贝氏体钢组织性能的影响. 《钢铁》.DOI
118. Xiang Yan Luo, Guang Xu, Xiaohua Chen, Zidong Wang (2021). Effect of undercooled austenite ausforming on the role of the M–A constituents in the CGHAZ toughness of the HSLA steels with bainite structure. Materials Science and Engineering A.DOI
119. Siying Song, Junyu Tian, Juan Xiao, Lei Fan, Yuebiao Yang, Qinpan Yuan, Xiaolong Gan, Guang Xu (2021). Effect of Vanadium and Strain Rate on Hot Ductility of Low-Carbon Microalloyed Steels. Metals.DOI
120. Man Liu, Wei Wang, Haijiang Hu, Feng Cai, Sheng Liu, Guang Xu (2021). The Corrosion and Wear Behaviors of a Medium-Carbon Bainitic Steel Treated by Boro-Austempering Process. Metals.DOI
121. Xue Su, Min Hua Zhu, Guang Xu, Qi Zhang, Feng Cai, Man Liu (2021). Comparison Between the Wear Behavior of U68CuCr and U71MnG Rail Steels. Journal of Materials Engineering and Performance.DOI
122. Qi Zhang, Min Hua Zhu, Feng Cai, Man Liu, Xue Su, Guang Xu (2021). Corrosion performance of a corrosion-resistant rail steel in the simulated subsea tunnel environment. Corrosion Reviews.DOI
123. Qingxiao Zhang, Qing Yuan, Zhoutou Wang, Wenwei Qiao, Guang Xu (2021). Enhanced Mechanical Properties in a Low-Carbon Ultrafine Grain Steel by Niobium Addition. Metallurgical and Materials Transactions A.DOI
124. Jisheng Guan, Man Liu, Junyu Tian, Zhenye Chen, Guang Xu (2021). Effects of Isothermal Transformation at the Quenching Temperature on the Microstructure and Mechanical Properties of a Medium-Carbon Steel. Transactions of the Indian Institute of Metals.DOI
125. Man Liu, Jisheng Guan, Qi Zhang, Lin Ai, Lei Fan, Guang Xu (2021). Microstructure and Properties of a Medium-Carbon Ti-Mo-Bearing Steel Treated by One-Step Quenching and Partitioning Treatment. Journal of Materials Engineering and Performance.DOI
126. Qingxiao Zhang, Qing Yuan, Zhiqiang Xiong, Man Liu, Guang Xu (2021). Effects of Q&T Parameters on Phase Transformation, Microstructure, Precipitation and Mechanical Properties in an Oil Casing Steel. The Physics of Metals and Metallography.DOI
127. Qingxiao Zhang, Qing Yuan, Zhoutou Wang, Wenwei Qiao, Guang Xu (2021). Enhanced Thermal Stability of the Low‐Carbon Ultrafine Grain Steel with Nanoprecipitates. steel research international.DOI
128. Zhirui Wei, Xiaolong Gan, Man Liu, Junyu Tian, Zhenye Chen, Guang Xu (2021). Comparison of the Impact Wear Performances of Quenching and Partitioning and Quenching and Tempering Steels. steel research international.DOI
129. Jisheng Guan, Qing Yuan, Qing Yuan, Qinpan Yuan, Qinpan Yuan, Lei Fan, Yuebiao Yang, Guang Xu (2021). Influences of Quenching Temperature on the Microstructure Evolution and Strength−Toughness of a Novel Medium‐Carbon Ti−Mo‐Bearing Martensite Steel. steel research international.DOI
130. Xiang Yan Luo, Zidong Wang, Xiaohua Chen, Yanlin Wang, Guang Xu (2021). Modifying of microstructure and toughness in the weld metal prepared by welding wire containing nanosized titanium oxides. Materials Science and Engineering A.DOI
131. Zishan Yao, Man Liu, Haijiang Hu, Junyu Tian, Guang Xu (2021). Microstructure and Wear Properties of a Bainite/Martensite Multi-phase Wear Resistant Steel. ISIJ International.DOI
132. Haijiang Hu, Guang Xu, Muhammad Nabeel, Neslihan Dogan, Hatem S. Zurob (2021). In Situ Study on Interrupted Growth Behavior and Crystallography of Bainite. Metallurgical and Materials Transactions A.DOI
133. 董常福，袁清，徐光，胡大（2020）. Nb对热轧低碳贝氏体钢组织与性能的影响. 《金属热处理》.
134. 姚耔杉，胡海江，田俊羽，周明星，徐光（2020）. 铬和铝元素对低碳贝氏体钢组织和性能影响. 《钢铁》.DOI
135. 邹航，徐光，刘曼（2020）. 轧后冷却工艺对低碳高强复相钢组织和性能的影响. 《钢铁研究学报》.DOI
136. 陈光辉，徐耀文，刘曼，陈振业，徐光（2020）. 高温变形和过冷度对中碳钢贝氏体相变的影响. 《钢铁研究学报》.DOI
137. Haijiang Hu, Junyu Tian, Guang Xu, Hatem S. Zurob (2020). New insights into the effects of deformation below-M on isothermal kinetics of bainitic transformation. Journal of Materials Research and Technology.DOI
138. Junyu Tian, Guang Xu, Haijiang Hu, Xiang Wang, Hatem S. Zurob (2020). Transformation kinetics of carbide-free bainitic steels during isothermal holding above and below MS. Journal of Materials Research and Technology.DOI
139. Guanghui Chen, Haijiang Hu, Guang Xu, Junyu Tian, Xiangliang Wan, Xiang Wang (2020). Optimizing Microstructure and Property by Ausforming in a Medium-carbon Bainitic Steel. ISIJ International.DOI
140. Wen Liang, Qing Yuan, Sheng Liu, Wenwei Qiao, Guang Xu (2020). Effect of Mo on the Precipitation Behavior of FB780 Steel with a High Hole-Expanding Ratio at Different Coiling Temperatures. Transactions of the Indian Institute of Metals.DOI
141. Man Liu, Guang Xu, Junyu Tian, Zhenye Chen, Ziliu Xiong (2020). The Effect of Primary Ferrite on Bainitic Transformation, Microstructure, and Properties of Low Carbon Bainitic Steel. Metal Science and Heat Treatment.DOI
142. Guanghui Chen, Reza Rahimi, Guang Xu, Horst Biermann, Javad Mola (2020). Impact of Al addition on deformation behavior of Fe–Cr–Ni–Mn–C austenitic stainless steel. Materials Science and Engineering A.DOI
143. Qingxiao Zhang, Qing Yuan, Wenwei Qiao, Guanghui Chen, Guang Xu (2020). Comparison of the strengthening effects of Nb, V, and Ti on the mechanical properties of 20MnSi low-alloy steel. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
144. Man Liu, Qing Yuan, Junyu Tian, Guanghui Chen, Wenwei Qiao, Guang Xu (2020). Investigation on the Oxidation Behavior of Dual-Phase Silicon-Containing Steel at Different Beginning Oxidation Temperatures. Arabian Journal for Science and Engineering.DOI
145. Man Liu, Jun Wang, Qi Zhang, Haijiang Hu, Guang Xu (2020). Optimized Properties of a Quenching and Partitioning Steel by Quenching at Fine Martensite Start Temperature. Metals and Materials International.DOI
146. Man Liu, Zhoutou Wang, Chenggang Pan, Qi Zhang, Haijiang Hu, Guang Xu (2020). Microstructure and Properties of a Medium‐Carbon High‐Strength Bainitic Steel Treated by Boro‐Austempering Treatment. steel research international.DOI
147. Yang Gao, Guang Xu, Xiaolong Guo, Guangqiang Li, Yong Wang (2020). Primary recrystallization characteristics and magnetic properties improvement of high permeability grain-oriented silicon steel by trace Cr addition. Journal of Magnetism and Magnetic Materials.DOI
148. Zishan Yao, Junyu Tian, Xin Chen, Zhirui Wei, Jun Wang, Guang Xu (2020). Investigation on Microstructure and Properties of Low‐Carbon Wear‐Resistant Steels with Addition of Cr and Ni. steel research international.DOI
149. Man Liu, Guang Xu, Junyu Tian, Qing Yuan, Xin Chen (2020). Effect of austempering time on microstructure and properties of a low-carbon bainite steel. International Journal of Minerals Metallurgy and Materials.DOI
150. Wen Liang, Qing Yuan, Sheng Liu, Guang Xu (2020). Investigation on Microstructural Delamination and Compositional Segregation in Flange Steel with a High Stretch Ratio. Metals and Materials International.DOI
151. Chengyang Hu, Xiangliang Wan, Kai Ming Wu, D.M. Xu, Guangqiang Li, Guang Xu, R.D.K. Misra (2020). On the impacts of grain refinement and strain-induced deformation on three-body abrasive wear responses of 18Cr–8Ni austenitic stainless steel. Wear.DOI
152. Man Liu, Guang Xu, Guanghui Chen, Zhoutou Wang (2020). Study on the transformation and microstructure evolution during hot-charging rolling process of a weathering steel. Metallurgical Research & Technology.DOI
153. Man Liu, Guang Xu, Xin Chen, Zhenye Chen, Ziliu Xiong (2020). Effect of Ausforming on Retained Austenite After Continuous Cooling Transformation in a Medium-Carbon High Strength Steel. Materials Research.DOI
154. 田俊羽，徐光，黄浩，陈光辉，胡海江（2019）. Ms以下温度等温淬火对中碳贝氏体钢相变和性能影响. 《钢铁研究学报》.DOI
155. 黄浩，徐光，戴方钦，宋章峰，郭丽涛，柯江军（2019）. 退火工艺对热镀锌用冷轧低碳高强钢组织和性能的影响. 《金属热处理》.DOI
156. 肖尊湖，刘宁，徐刚军，陈光辉，徐光，彭其春（2019）. 12Cr1MoV耐热钢热装热送过程相变行为及组织研究. 《连铸》.DOI
157. 刘曼，徐光，田俊羽，魏智睿，张庆枭（2019）. 硅含量对低碳贝氏体相变动力学和性能的影响. 《钢铁研究学报》.DOI
158. 熊涛，徐光，袁清，王周头，胡海江（2019）. 低温压力容器用07Ni5DR钢的动态CCT曲线. 《金属热处理》.DOI
159. Zishan Yao, Guang Xu, Zhengyi Jiang, Junyu Tian, Qing Yuan, Hongwei Ma (2019). Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels. Metals and Materials International.DOI
160. Mengen Liu, Ying Ma, Guang Xu, Guangyu Cai, Mingxing Zhou, Xi Zhang (2019). Effects of Plastic Stress on Transformation Plasticity and Microstructure of a Carbide-Free Bainite Steel. Metallography Microstructure and Analysis.DOI
161. Zishan Yao, Guang Xu, Haijiang Hu, Qing Yuan, Junyu Tian, Mingxing Zhou (2019). Effect of Ni and Cr Addition on Transformation and Properties of Low-Carbon Bainitic Steels. Transactions of the Indian Institute of Metals.DOI
162. Tao Xiong, Guang Xu, Qing Yuan, Haijiang Hu, Junyu Tian (2019). Effects of Initial Austenite Grain Size on Microstructure and Mechanical Properties of 5% Nickel Cryogenic Steel. Metallography Microstructure and Analysis.DOI
163. Hang Zou, Haijiang Hu, Guang Xu, Ziliu Xiong, Fangqin Dai (2019). Combined Effects of Deformation and Undercooling on Isothermal Bainitic Transformation in an Fe-C-Mn-Si Alloy. Metals.DOI
164. Haijiang Hu, Guang Xu, Fangqin Dai, Junyu Tian, Guanghui Chen (2019). Critical ausforming temperature to promote isothermal bainitic transformation in prior-deformed austenite. Materials Science and Technology.DOI
165. Jisheng Guan, Qing Yuan, Zhiqiang Xiong, Qingxiao Zhang, Guang Xu (2019). Effects of Q&T parameters on phase transformation, microstructure, precipitation and mechanical properties in a PS-30Cr2Nb pipeline steel. Materials Research Express.DOI
166. Guanghui Chen, Guang Xu, Haijiang Hu, Junyu Tian, Qing Yuan, Jun Wang (2019). Effect of two-step ausforming on bainite transformation and retained austenite in a medium-carbon bainitic steel. Materials Research Express.DOI
167. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Jianxin Yu, Guang Xu (2019). On the deformation mechanism of austenitic stainless steel at elevated temperatures: A critical analysis of fine-grained versus coarse-grained structure. Materials Science and Engineering A.DOI
168. Man Liu, Guang Xu, Guanghui Chen, Juan Jia, Zhenye Chen, Ziliu Xiong (2019). Effects of Stress on Martensite Transformation During Continuous Cooling and Mechanical Response of a Medium-Carbon High-Strength Steel. Metallurgical and Materials Transactions A.DOI
169. Xiaolong Gan, Xiangliang Wan, Yongjie Zhang, Honghong Wang, Guangqiang Li, Guang Xu, Kaiming Wu (2019). Investigation of characteristic and evolution of fine-grained bainitic microstructure in the coarse-grained heat-affected zone of super-high strength steel for offshore structure. Materials Characterization.DOI
170. Guanghui Chen, Guang Xu, Haijiang Hu, Xin Chen, Javad Mola (2019). Effect of Deformation during Austempering on Bainite Transformation and Retained Austenite in a Medium‐Carbon Bainitic Steel. steel research international.DOI
171. Junyu Tian, Guanghui Chen, Yaowen Xu, Zhengyi Jiang, Guang Xu (2019). Comprehensive Analysis of the Effect of Ausforming on the Martensite Start Temperature in a Fe-C-Mn-Si Medium-Carbon High-Strength Bainite Steel. Metallurgical and Materials Transactions A.DOI
172. Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu, Qing Yuan, Xiangliang Wan (2019). In-Situ Observation of Martensitic Transformation in a Fe–C–Mn–Si Bainitic Steel During Austempering. Metals and Materials International.DOI
173. Junyu Tian, Guang Xu, Zhengyi Jiang, Qing Yuan, Guanghui Chen, Haijiang Hu (2019). Effect of austenisation temperature on bainite transformation below martensite starting temperature. Materials Science and Technology.DOI
174. Man Liu, Guang Xu, Junyu Tian, Qing Yuan, Mingxing Zhou, Haijiang Hu (2019). The Effect of Stress on Bainite Transformation, Microstructure, and Properties of a Low‐Carbon Bainitic Steel. steel research international.DOI
175. Min Zhu, Guang Xu, Mingxing Zhou, Haijiang Hu (2019). The Effects of Cooling Mode on the Properties of Ti–Nb Microalloyed High-strength Hot-rolled Steels. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
176. Xiaolong Gan, Qing Yuan, Gang Zhao, Haijiang Hu, Junyu Tian, Guang Xu (2019). Investigating the Properties of Coil Tail in Ti–Nb–Mo Microalloyed Hot‐Rolled Strip. steel research international.DOI
177. Tao Xiong, Guang Xu, Qing Yuan, Haijiang Hu, Junyu Tian (2019). Correction to: Effects of Initial Austenite Grain Size on Microstructure and Mechanical Properties of 5% Nickel Cryogenic Steel. Metallography Microstructure and Analysis.DOI
178. Junyu Tian, Guang Xu, Haijiang Hu, Mingxing Zhou (2019). Effects of Undercooling and Transformation Time on Microstructure and Strength of Fe–C–Mn–Si Superbainitic Steel. Strength of Materials.DOI
179. Junyu Tian, Guang Xu, Mingxing Zhou, Haijiang Hu, Zhengliang Xue (2019). Effects of Al addition on bainite transformation and properties of high-strength carbide-free bainitic steels. Journal of Iron and Steel Research International.DOI
180. 熊志强，徐光，袁清，胡海江（2018）. 回火工艺对热轧高强贝氏体钢轨组织和力学性能的影响. 《武汉科技大学学报》.
181. 宋昭，文艺贝，张琪，黄煜博，田俊羽，徐光（2018）. Co和Al对超高强贝氏体钢组织和性能的影响. 《金属热处理》.
182. 黄浩，徐光，胡海江（2018）. 冷却模式对Ti-Nb微合金高强钢组织和性能的影响. 《金属热处理》.
183. 黄煜博，张琪，文艺贝，宋昭，周明星，徐光（2018）. Ni元素对高碳纳米结构贝氏体钢组织和性能的影响. 《钢铁研究学报》.
184. 姚耔杉，徐光，胡海江（2018）. 奥氏体预变形对等温贝氏体相变和组织影响. 《钢铁研究学报》.
185. De-Ming Xu, Xiang-Liang Wan, J.-X. Yu, Guang Xu, Guang-Qiang Li (2018). Effect of grain refinement on strain hardening and fracture in austenitic stainless steel.DOI
186. De-Ming Xu, Xiang-Liang Wan, J.-X. Yu, Guang Xu, Guang-Qiang Li (2018). Effect of strain rate on microstructures and mechanical properties of Fe–18Cr–8Ni steel. Materials Science and Technology.DOI
187. Junyu Tian, Guang Xu, Zhengyi Jiang, Xiangliang Wan, Haijiang Hu, Qing Yuan (2018). Transformation Behavior and Properties of Carbide‐Free Bainite Steels with Different Si Contents. steel research international.DOI
188. Weigang Li, Wei Yang, Yuntao Zhao, Guang Xu, Liu Xiang-hua (2018). A new method to predict mechanical properties for microalloyed steels via industrial data and mechanism analysis. Journal of Iron and Steel Research International.DOI
189. Qing Yuan, Guang Xu, Man Liu, Sheng Liu, Haijiang Hu (2018). Evaluation of Mechanical Properties and Microstructures of Ultrafine Grain Low-Carbon Steel Processed by Cryorolling and Annealing. Transactions of the Indian Institute of Metals.DOI
190. Yang Gao, Guang Xu, Xiaolong Guo, Guangqiang Li (2018). Effect of Cr on secondary recrystallization behaviors in high permeability grain oriented silicon steel manufactured by low-temperature slab reheating. Journal of Magnetism and Magnetic Materials.DOI
191. Guanghui Chen, Guang Xu, Hatem S. Zurob, Haijiang Hu, Xiangliang Wan (2018). Effect of Strain Rate on the Bainitic Transformation in Fe-C-Mn-Si Medium-Carbon Bainitic Steels. Metallurgical and Materials Transactions A.DOI
192. Junyu Tian, Guang Xu, Zhengyi Jiang, Mingxing Zhou, Haijiang Hu, Qing Yuan (2018). Transformation Behavior of Bainite during Two-step Isothermal Process in an Ultrafine Bainite Steel. ISIJ International.DOI
193. Xiaolong Gan, Guang Xu, Gang Zhao, Mingxing Zhou, Zhen Cai (2018). Composition Optimization of Nb-Ti Microalloyed High Strength Steel. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
194. Qing Yuan, Guang Xu, Man Liu, Haijiang Hu, Junyu Tian (2018). Effects of Rolling Temperature on the Microstructure and Mechanical Properties in an Ultrafine‐Grained Low‐Carbon Steel. steel research international.DOI
195. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Jie Yu, Yongjie Zhang, Guang Xu (2018). The significant impact of cold deformation on structure-property relationship in phase reversion-induced stainless steels. Materials Characterization.DOI
196. Zi Shan Yao, Guang Xu, Ming Xing Zhou (2018). Effect of Vanadium on the Microstructure and Property of Rebar Steel. Materials science forum.DOI
197. Guanghui Chen, Guang Xu, Haijiang Hu, Qing Yuan, Qingxiao Zhang (2018). Effect of Strain Rate on Deformation Resistance during Ausforming in Fe–C–Mn–Si High‐Strength Bainite Steels. steel research international.DOI
198. Yue Guo, Fangqin Dai, Shoutian Hu, Guang Xu (2018). Effect of Surface Oxidation on Decarburization of a Fe-3%Si Steel during Annealing. ISIJ International.DOI
199. Deming Xu, Xiangliang Wan, Jianxin Yu, Guang Xu, Guangqiang Li (2018). Effect of Cold Deformation on Microstructures and Mechanical Properties of Austenitic Stainless Steel. Metals.DOI
200. Qing Yuan, Guang Xu, Sheng Liu, Man Liu, Haijiang Hu, Guangqiang Li (2018). Effect of Rolling Reduction on Microstructure and Property of Ultrafine Grained Low-Carbon Steel Processed by Cryorolling Martensite. Metals.DOI
201. Min Zhu, Guang Xu, Mingxing Zhou, Qing Yuan, Junyu Tian, Haijiang Hu (2018). Effects of Tempering on the Microstructure and Properties of a High-Strength Bainite Rail Steel with Good Toughness. Metals.DOI
202. Xiaolong Gan, Gengwei Yang, Gang Zhao, Xinping Mao, Huihui Huang, Guang Xu (2018). Effect of Vanadium on the Phase Transformation Behavior of Ti–Mo Microalloyed Ultra‐High Strength Steel. steel research international.DOI
203. Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu, Mingxing Zhou (2018). Effect of Ni Addition on Bainite Transformation and Properties in a 2000 MPa Grade Ultrahigh Strength Bainitic Steel. Metals and Materials International.DOI
204. Qing Yuan, Guang Xu, Weicheng Liang, Mingxing Zhou, Haijiang Hu (2018). Effects of oxygen concentration on the passivation of Si-containing steel during high-temperature oxidation. Corrosion Reviews.DOI
205. Bei He, Guang Xu, Qing Yuan, Mingxing Zhou, Weicheng Liang (2018). New insight to the oxidation kinetics of silicon-containing steel at high temperature. Materials at High Temperatures.DOI
206. Dongdong Xu, Guangqiang Li, Xiangliang Wan, R.D.K. Misra, Xianguang Zhang, Guang Xu, Kaiming Wu (2018). The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel. Materials Science and Engineering A.DOI
207. Qing Yuan, Guang Xu, Weicheng Liang, Bei He, Mingxing Zhou (2018). Effects of oxygen content on the oxidation process of Si-containing steel during anisothermal heating. International Journal of Minerals Metallurgy and Materials.DOI
208. Junyu Tian, Guang Xu, Mingxing Zhou, Haijiang Hu (2018). Refined Bainite Microstructure and Mechanical Properties of a High‐Strength Low‐Carbon Bainitic Steel Treated by Austempering Below and Above MS. steel research international.DOI
209. Mingxing Zhou, Guang Xu, Haijiang Hu, Qing Yuan, Junyu Tian (2018). Kinetics model of bainitic transformation with stress. Metals and Materials International.DOI
210. 刘曼，徐光，周明星，田俊羽，袁清（2017）. 等温温度和时间对超级贝氏体钢Fe-0.40C-2.2Mn-1.5Si相变和组织性能的影响. 《武汉科技大学学报》.
211. 朱敏，徐光，侯蓉，郑建国，周建华（2017）. U68CuCr与U75V轨道钢磨损行为研究. 《表面技术》.
212. 梁伟成，徐光，戴方钦，巫嘉谋，胡海江（2017）. ZG40Cr25Ni20奥氏体耐热钢的烧损研究. 《材料热处理学报》.
213. Qing Yuan, Guang Xu, Bei He, Mingxing Zhou, Haijiang Hu (2017). A Method to Reduce the Oxide Scale of Silicon-Containing Steels by Adjusting the Heating Route. Transactions of the Indian Institute of Metals.DOI
214. Mingxing Zhou, Guang Xu, Qing Yuan (2017). The morphologies of oxide scale in a Si-containing steel. IOP Conference Series Materials Science and Engineering.DOI
215. Yaowen Xu, Guang Xu, Xinping Mao, Gang Zhao, Siqian Bao (2017). Method to Evaluate the Kinetics of Bainite Transformation in Low-Temperature Nanobainitic Steel Using Thermal Dilatation Curve Analysis. Metals.DOI
216. Mingxing Zhou, Guang Xu, Haijiang Hu, Qing Yuan, Junyu Tian (2017). Comprehensive analysis on the effects of different stress states on the bainitic transformation. Materials Science and Engineering A.DOI
217. Mingxing Zhou, Guang Xu, Junyu Tian, Haijiang Hu, Qing Yuan (2017). Bainitic Transformation and Properties of Low Carbon Carbide-Free Bainitic Steels with Cr Addition. Metals.DOI
218. Qing Yuan, Guang Xu, Junyu Tian, Weicheng Liang (2017). The Recrystallization Behavior in Ultrafine-Grained Structure Steel Fabricated by Cold Rolling and Annealing. Arabian Journal for Science and Engineering.DOI
219. Junyu Tian, Guang Xu, Li Wang, Mingxing Zhou, Haijiang Hu (2017). In Situ Observation of the Lengthening Rate of Bainite Sheaves During Continuous Cooling Process in a Fe–C–Mn–Si Superbainitic Steel. Transactions of the Indian Institute of Metals.DOI
220. Hailin Yang, Guang Xu, L. Wang, Qing Yuan, B. He (2017). A Study of Growth of Austenite Grains in a Steel Microalloyed with Ti and Nb. Metal Science and Heat Treatment.DOI
221. Junyu Tian, Guang Xu, Weicheng Liang, Qing Yuan (2017). Effect of Annealing on the Microstructure and Mechanical Properties of a Low-Carbon Steel with Ultrafine Grains. Metallography Microstructure and Analysis.DOI
222. Rong Hou, Guang Xu, Haijiang Hu, Mingxing Zhou (2017). Effects of Nb Addition on Transformation Kinetics and Microstructure Properties in Low-Carbon Bainitic Steels. Metallography Microstructure and Analysis.DOI
223. Haijiang Hu, Guang Xu, Mingxing Zhou, Qing Yuan (2017). New insights to the promoted bainitic transformation in prior deformed austenite in a Fe-C-Mn-Si alloy. Metals and Materials International.DOI
224. Dongdong Xu, Guangqiang Li, Xiangliang Wan, Renlong Xiong, Guang Xu, Kaiming Wu, Mahesh Chandra Somani, R.D.K. Misra (2017). Deformation behavior of high yield strength – High ductility ultrafine-grained 316LN austenitic stainless steel. Materials Science and Engineering A.DOI
225. Maoqiu Wang, Guang Xu, Li Wang, Yaowen Xu, Zhengliang Xue (2017). Effects of Mn on microstructures and properties of hot rolled low carbon bainitic steels. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
226. Junyu Tian, Guang Xu, Mingxing Zhou, Haijiang Hu, Xiangliang Wan (2017). The Effects of Cr and Al Addition on Transformation and Properties in Low‐Carbon Bainitic Steels. Metals.DOI
227. Qing Yuan, Guang Xu, Mingxing Zhou, Bei He, Haijiang Hu (2017). The Effect of P on the Microstructure and Melting Temperature of Fe2SiO4 in Silicon-Containing Steels Investigated by In Situ Observation. Metals.DOI
228. 袁清，徐光，何贝，周明星（2016）. 硅对热轧低碳贝氏体钢组织和力学性能的影响. 《热加工工艺》.
229. 朱敏，徐光，王瑞敏，刘文艳（2016）. U77CrNb钢轨钢连续冷却转变曲线研究. 《钢铁研究》.
230. Mingxing Zhou, Guang Xu, Haijiang Hu, Qing Yuan, Junyu Tian (2016). The Morphologies of Different Types of Fe2SiO4–FeO in Si-Containing Steel. Metals.DOI
231. Mingxing Zhou, Guang Xu, Haijiang Hu, Qing Yuan, Junyu Tian (2016). The Effect of Large Stress on Bainitic Transformation at Different Transformation Temperatures. steel research international.DOI
232. Mingxing Zhou, Guang Xu, Li Wang, Haijiang Hu (2016). Combined effect of the prior deformation and applied stress on the bainite transformation. Metals and Materials International.DOI
233. Qing Yuan, Guang Xu, Mingxing Zhou, Bei He (2016). New insights into the effects of silicon content on the oxidation process in silicon-containing steels. International Journal of Minerals Metallurgy and Materials.DOI
234. Mingxing Zhou, Guang Xu, Li Wang, Bei He (2016). Effects of Austenitization Temperature and Compressive Stress During Bainitic Transformation on the Stability of Retained Austenite. Transactions of the Indian Institute of Metals.DOI
235. Haijiang Hu, Guang Xu, Mingxing Zhou, Qing Yuan (2016). Effect of Mo Content on Microstructure and Property of Low-Carbon Bainitic Steels. Metals.DOI
236. Haijiang Hu, Guang Xu, Li Wang, Mingxing Zhou (2016). Effects of Strain and Deformation Temperature on Bainitic Transformation in a Fe-C-Mn-Si Alloy. steel research international.DOI
237. Bei He, Guang Xu, Mingxing Zhou, Qing Yuan (2016). Effect of Oxidation Temperature on the Oxidation Process of Silicon-Containing Steel. Metals.DOI
238. Mingxing Zhou, Guang Xu, Li Wang, Qing Yuan (2016). The Varying Effects of Uniaxial Compressive Stress on the Bainitic Transformation under Different Austenitization Temperatures. Metals.DOI
239. Qing Yuan, Guang Xu, Mingxing Zhou, Bei He (2016). The Effect of the Si Content on the Morphology and Amount of Fe2SiO4 in Low Carbon Steels. Metals.DOI
240. Qing Yuan, Guang Xu, Bei He, Rong Hou (2016). Effects of Ultra-Fast Cooling Technology on Microstructure and Properties of Low Carbon Steel. Metallography Microstructure and Analysis.DOI
241. 徐光，姜周华，李阳，胡汉涛，马志刚（2015）. X80管线钢中Ca处理氧硫化物夹杂的机理研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
242. 袁清，徐光，王利，何贝，周明星（2015）. 硅含量对热轧低碳贝氏体钢组织和性能的影响. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
243. 张晨，徐光，袁清，何贝（2015）. 微合金元素V和冷却工艺对C-Si-Mn系螺纹钢中纳米析出物的影响. 《钢铁钒钛》.
244. 何贝，徐光，袁清（2015）. 压力容器用12Cr2Mo1R钢150mm超厚板热处理对组织和性能的影响. 《特殊钢》.
245. 万响亮，李光强，周博文，马江华，徐光（2015）. 微米/纳米复合结构奥氏体不锈钢形变机理及应变硬化行为. 《材料热处理学报》.
246. 胡海江，徐光，张玉龙，周明星（2015）. 变形对贝氏体钢等温相变动力学影响. 《材料热处理学报》.
247. Mingxing Zhou, Guang Xu, Li Wang, Zhengliang Xue, Haijiang Hu (2015). Comprehensive analysis of the dilatation during bainitic transformation under stress. Metals and Materials International.DOI
248. Haijiang Hu, Guang Xu, Li Wang, Mingxing Zhou, Zhengliang Xue (2015). Effect of ausforming on the stability of retained austenite in a C-Mn-Si bainitic steel. Metals and Materials International.DOI
249. Haijiang Hu, Guang Xu, Yulong Zhang, Zhengliang Xue, Mingxing Zhou (2015). Dynamic observation of bainite transformation in a Fe-C-Mn-Si superbainite steel. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
250. Mingxing Zhou, Guang Xu, Yulong Zhang, Zhengliang Xue (2015). The effects of external compressive stress on the kinetics of low temperature bainitic transformation and microstructure in a superbainite steel. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
251. Haijiang Hu, Guang Xu, Li Wang, Zhengliang Xue, Yulong Zhang, Guang‐Hui Liu (2015). The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels. Materials & Design.DOI
252. Mingxing Zhou, Guang Xu, Li Wang, Haijiang Hu (2015). Effect of Undercooling and Austenitic Grain Size on Bainitic Transformation in an Fe–C–Mn–Si Superbainite Steel. Transactions of the Indian Institute of Metals.DOI
253. Qing Yuan, Guang Xu, Bei He, Yulong Zhang (2015). Effect of Ti on microstructure and properties of Ti-Nb microalloyed high strength steels.DOI
254. 胡张薇，徐光，王力，王敏，张益（2014）. C-Mn-Si-Mo系低碳贝氏体钢连续冷却转变曲线. 《金属热处理》.
255. 胡海江，徐光，刘峰（2014）. 超级贝氏体钢相变的原位观察研究. 《材料科学与工艺》.
256. 胡海江，徐光，张玉龙，刘峰（2014）. 先进贝氏体钢奥氏体晶粒长大行为的动态观察. 《材料热处理学报》.
257. 胡张薇，徐光，王凤琪，余茹（2014）. 冷却工艺对微合金钢析出和力学性能的影响. 《热加工工艺》.
258. Haijiang Hu, Hatem S. Zurob, Guang Xu, David Embury, G.R. Purdy (2014). New insights to the effects of ausforming on the bainitic transformation. Materials Science and Engineering A.DOI
259. Zhang-wei Hu, Guang Xu, Hailin Yang, Chen Zhang, Ru Yu (2014). The Effects of Cooling Mode on Precipitation and Mechanical Properties of a Ti-Nb Microalloyed Steel. Journal of Materials Engineering and Performance.DOI
260. Maoqiu Wang, Guang Xu, Zheng Xue, Tao Xiong, Ming Xing Zhou (2014). Effect of Mn and Si on the Microstructure and Mechanical Properties of Bearing Steel. Advanced materials research.DOI
261. Zhang Wei Hu, Guang Xu, Chen Zhang, Hai Jiang Hu (2014). Research on Continuous Cooling Transformation Curve of a C-Si-Mn Steel. Applied Mechanics and Materials.DOI
262. Yi Zhang, Guang Xu, Yue Yu, Hailin Yang, Ming Xing Zhou (2014). The Simulation of Temperature Field of 12Cr2Mo1R Ultra Thick Plate for Pressure Vessels during Heat Treatment by 3D-FEM. Applied Mechanics and Materials.DOI
263. Min Wang, Guang Xu, Hailin Yang, Ming Xing Zhou, Tao Xiong (2014). Research on CCT Curve of 12Cr2Mo1R Pressure Vessel Steel. Applied Mechanics and Materials.DOI
264. Ming Xing Zhou, Guang Xu, Hailin Yang, Tao Xiong (2014). Study on the Heat Treatment Process of Ultra Thick Plate of 12Cr2Mo1R Pressure Vessel Steel. Applied Mechanics and Materials.DOI
265. Chen Zhang, Guang Xu, Zhang Wei Hu, Hailin Yang (2014). Continuous Cooling Transformation Behavior of a Ti Addition Steel. Applied Mechanics and Materials.DOI
266. Zhang-wei Hu, Guang Xu, Haijiang Hu, Li Wang, Zhengliang Xue (2014). In situ measured growth rates of bainite plates in an Fe-C-Mn-Si superbainitic steel. International Journal of Minerals Metallurgy and Materials.DOI
267. Haijiang Hu, Guang Xu, Feng Liu, Li Wang, Lixin Zhou, Zhengliang Xue (2014). Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
268. Guang Xu, Tao Xiong, Yu Long Zhang, Ming Xing Zhou, Yi Zhang (2014). The Effects of High Temperature Deformation on Bainite Transformation. Applied Mechanics and Materials.DOI
269. Yi Zhang, Guang Xu, Ming Xing Zhou, Hailin Yang, Min Wang (2014). The Effect of Reheating Temperature on Precipitation of a High Strength Microalloyed Steel. Applied Mechanics and Materials.DOI
270. Hailin Yang, Guang Xu, Yi Zhang, Maoqiu Wang, Ming Xing Zhou (2014). Microstructure and Precipitation of a High Strength Microalloyed Steel. Applied Mechanics and Materials.DOI
271. 陈静，徐光，王凤琪，杨静（2013）. 超快冷却对含钒微合金钢组织和性能的影响. 《钢铁钒钛》.
272. Guang Xu, Feng Liua, Li Wang, Haijiang Hu（2013）. 超级贝氏体钢中贝氏体转变的一种新的定量分析方法. 《热处理技术与装备》.
273. Xiaoxu Zhang, Guang Xu, Xiang Wang, David Embury, Olivier Bouaziz, G.R. Purdy, Hatem S. Zurob (2013). Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels. Metallurgical and Materials Transactions A.DOI
274. Feng Liu, Guang Xu, Yulong Zhang, Haijiang Hu, Lin-xin Zhou, Zhengliang Xue (2013). In situ observations of austenite grain growth in Fe-C-Mn-Si super bainitic steel. International Journal of Minerals Metallurgy and Materials.DOI
275. Guang Xu, Hai Jiang Hu, Tao Xiong, Zhang Wei Hu (2013). Study of Precipitation in Continuously Casting Slabs of Microalloyed Steels. Applied Mechanics and Materials.DOI
276. Guang Xu, Feng Liu, Li Wang, Haijiang Hu (2013). A new approach to quantitative analysis of bainitic transformation in a superbainite steel. Scripta Materialia.DOI
277. Guang Xu, P. Deng, G. X. Wang, Long Cao, F. Liu (2013). Measurement of expansion coefficients of four steel types. Ironmaking & Steelmaking Processes Products and Applications.DOI
278. Guang Xu, Jing Yang, Tao Xiong, Peng Deng, Long Cao (2013). The Study on the Fabrication of Nano-Structured Steel by Cold Rolling and Annealing of Martensite. Advanced materials research.DOI
279. 补丛华，徐光，邹航，王翔（2012）. 亚纳米超细贝氏体钢的组织和性能. 《材料热处理学报》.
280. 徐光，邓鹏，邹航，补丛华（2012）. 奥氏体变形对超级贝氏体相变和组织的影响. 《热加工工艺》.
281. Xiang Wang, Hatem S. Zurob, Guang Xu, Qibin Ye, Olivier Bouaziz, David Embury (2012). Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite. Metallurgical and Materials Transactions A.DOI
282. Shuli Li, Run Wu, Yuan-zheng Wei, Zhifang Wu, Xuejun Zhou, Yongfu Zhang, Guang Xu (2012). Correlation of morphological anisotropy and Lankford value of deep drawing sheets hot-rolled by compact strip production. International Journal of Minerals Metallurgy and Materials.DOI
283. 补丛华，徐光，刘峰，邹航（2011）. 低温变形对Fe-C-Mn-Si超级贝氏体钢组织的影响. 《金属热处理》.
284. 徐光，杨静，邹航，补丛华，操龙飞（2011）. 含钒超级贝氏体钢组织和性能研究. 《钢铁钒钛》.
285. Guang Xu, Hang Zou, Cong Hua Bu (2011). The Effect of Bainitic Transformation on Martensite Start Temperature of a Fe-C-Mn-Si Alloy. Advanced materials research.DOI
286. Ting Chen, Guang Xu (2011). Study on Composition-graded Steel. Rejiagong gongyi.
287. 张聪，徐光，陈婷，罗丰（2010）. 热处理对一种高锰钢组织和性能的影响. 《热处理技术与装备》.DOI
288. 罗雄志，陈振业，徐光（2009）. 微合金高强度钢连续冷却转变及显微组织研究. 《钢铁研究》.
289. 刘莉，徐光，郁盛富，江彪（2009）. 退火工艺对CSP基板DDQ冷轧板深冲性能的影响. 《热处理技术与装备》.
290. 陈振业，徐光（2009）. 变形工艺对微合金高强度钢组织的影响. 《钢铁钒钛》.
291. 郁盛富，徐光，杨奕，刘莉，万伦（2009）. 冷轧薄板再结晶温度研究. 《热处理技术与装备》.DOI
292. 陈婷，徐光，李光强，肖爱达，罗丰（2009）. 钛微合金化X70管线钢动态CCT曲线研究. 《钢铁研究》.
293. 邹航，徐光，李光强，王建峰，甘晓龙（2009）. 钛微合金化X70管线钢热变形方程的建立. 《钢铁研究》.
294. Guang Xu, Xiaolong Gan, Guojun Ma, Feng Hua Luo, Hang Zou (2009). The development of Ti-alloyed high strength microalloy steel. Materials & Design (1980-2015).DOI
295. Guang Xu (2009). Revision of Misaka flow stress model. Southern Metals.
296. 杨奕，徐光，郁盛富，刘莉，万伦（2008）. 传统流程和短流程冷轧冲压板组织和性能的研究. 《钢铁研究》.
297. Guang Xu, Lun Wan, Shengfu Yu, Li Liu, Feng Hua Luo (2008). A new method for accurate plotting continuous cooling transformation curves. Materials Letters.DOI
298. Guang Xu, Lun Wan, Xin Qiang Zhang, Zheng Xue (2008). Study on Flow Stress Model of a Microalloyed High Strength Steel in CSP Hot Rolling. Materials science forum.DOI
299. Guang Xu, Zhenye Chen, Li Liu, Shengfu Yu (2008). Deformation behavior of ultra-low carbon steel in ferrite region during warm processing. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
300. Guang Xu, Li Liu, Zhenye Chen, Biao Jiang, Fei Guo (2008). Drawing Properties of Cold Rolled Sheets Produced from Thin-slab-casting-rolling Hot Strips. ISIJ International.DOI
301. 张云祥，徐光，赵刚，赵嘉蓉，周峰（2007）. CSP与常规热轧工艺生产Q345B钢带的组织性能对比. 《钢铁研究》.
302. 田勇，徐光，马成，张晓军，沈厚发（2007）. 连铸机工艺模拟软件开发及在冷却优化方面的应用. 《2007中国钢铁年会论文集》.
303. Guang Xu, Yi Tao Yang, Xinqiang Zhang (2007). Study of aging behavior of CSP hot bands for cold sheets. Materials Characterization.DOI
304. Guang Xu, Xianjun Liu, Jiarong Zhao, Junwei Xiong (2007). Analysis of CVC roll contour and determination of roll crown. International Journal of Minerals Metallurgy and Materials.DOI
305. Guang Xu, Yi Tao Yang, Xinqiang Zhang, Huangqiang Zhang (2007). Influence of Annealing Technology on Drawing Properties of Cold Sheets Rolled with Compact Strip Production Hot Bands. ISIJ International.DOI
306. 徐光，徐楚韶，赵嘉蓉（2006）. 铁素体低温轧制生产现状. 《钢铁研究》.
307. 徐光，徐楚韶，赵嘉蓉，刘显军，熊俊伟（2006）. 超低碳IF钢铁素体动态再结晶研究. 《钢铁》.
308. Guang Xu, XU Chu-shao, Jiarong Zhao (2006). Flow Stress Constitutive Model of Ultra Low Carbon Steel in Warm Deformation. ISIJ International.DOI
309. 张云祥，杭乃勤，余驰斌，徐光，赵嘉蓉（2005）. 82B钢奥氏体等温相变动力学方程的测定. 《武汉科技大学学报》.
310. 徐光，徐楚韶，赵嘉蓉，刘显军，熊俊伟（2005）. Ti-IF钢多道次变形静态再结晶研究. 《钢铁钒钛》.
311. 王立来，徐光，李万向（2003）. LD-LF-VD-CC流程生产X70管线钢的探索. 《中国金属学会2003中国钢铁年会论文集（3）》.

预印本

1. Yunfeng Wang, Junyu Tian, Yuanyuan Nie, Ruitao Huang, Ziyu Yang, Haijiang Hu, Guang Xu (2026). Study on Deformation Resistance Model under Different Rolling Processes of a Low-Carbon Ti-Containing Steel. SSRN Electronic Journal.DOI
2. Juan Xiao, Qi Zhang, Xiaolong Gan, Junyu Tian, Wei Huang, Guojun Ma, Feng Huang, Guang Xu (2026). Effects of Deformation Parameters on Microstructure and Mechanical Properties of a 1300 MPa Grade Steel for Engineering Machinery. SSRN Electronic Journal.DOI
3. Qing Yuan, Jie Ren, Jiaxuan Mo, Zhicheng Zhang, En Tang, Guang Xu, Zhengliang Xue (2023). Possibility of Rapid Heating in the Preparation of Low-Carbon Ultrafine Steel: Effect of Heating Rate on the Phase Transformation and Microstructure. SSRN Electronic Journal.DOI

书籍章节

1. Xiaolong Gan, Qing Yuan, Gang Zhao, Hongwei Ma, Wen Liang, Zhengliang Xue, Wenwei Qiao, Guang Xu (2020). Quantitative Analysis of Microstructures and Strength of Nb-Ti Microalloyed Steel with Different Ti Additions. Metallurgical and Materials Transactions A.DOI