马春伟｜上海工程技术大学｜学者主页

2025

Prediction of weld residual stresses based on numerical simulation and machine learning: a review

Yuli Qin, Chunwei Ma, Lin Mei

The International Journal of Advanced Manufacturing Technology

DOI

2024

The prediction of residual stress of welding process based on deep neural network

Yuli Qin, Chun-Wei Ma, Lin Mei, Yuan Fang, Yi Zhao

Materials Today Communications

DOI

2024

Prediction of residual stresses in welded structures based on neural network: a review

Yuli Qin, Chunwei Ma, Lin Mei

Journal of Materials Science

DOI

2023

熔化焊和摩擦焊残余应力分布规律分析

苏文韬，姚恺，方圆，马春伟

《锻压装备与制造技术》

2023

The Different Welding Layers and Heat Source Energy on Residual Stresses in Swing Arc Narrow Gap MAG Welding

Yuan Fang, Chun-Wei Ma, Guangkai Zhang, Yuli Qin, Wentao Cao

Materials

DOI

2022

基于ABAQUS的MAG焊接温度场数值模拟与热循环分析

明灿，马春伟

《电子科技》

2022

焊缝宽度对碳钢对接接头残余应力分布的影响

刘振雄，张光凯，马春伟，吴全龙

《轻工机械》

2022

Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni

Wanlong Dong, Chun-Wei Ma, Wei Li, Rui Cao, Chen Liang, Wanchao Zhu, Gaojun Mao, Xili Guo, Yong Jun Jiang, Jianhong Chen

Journal of Materials Engineering and Performance

DOI

2022

Investigation of Distribution of Residual Stress in Swing arc Narrow Gap MAG Welding by Numerical Simulation and Experiments

G. Zhang, Chunwei Ma, Z. Liu, W. Cao, Yuan Fang

Transactions of the Indian Institute of Metals

DOI

2021

窄间隙摆动电弧数值模拟

徐刚，张天雷，何林基，沈艳涛，马春伟

《轻工机械》

2021

焊缝宽度对对接接头疲劳强度的影响

刘振雄，徐刚，曹文涛，马春伟

《上海工程技术大学学报》

2021

摆动电弧窄间隙厚板焊接工艺与熔池演变数值研究

徐刚，张天雷，何林基，沈艳涛，马春伟

《轻工机械》

2021

不锈钢激光深熔焊熔池动态行为数值模拟

何林基，张天雷，徐刚，马春伟

《智能计算机与应用》

2021

表面张力对激光深熔焊熔池小孔的影响

何林基，张天雷，徐刚，顾广石，马春伟

《轻工机械》

2020

厚板窄间隙MIG焊接工艺的变形与分析

明灿，马春伟

《智能计算机与应用》

2020

基于MIG的电弧增材制造不同层间停留时间温度场仿真模拟

张天雷，徐刚，沈艳涛，明灿，何林基，马春伟

《轻工机械》

2020

基于MIG的电弧增材制造熔池行为的数值模拟

张天雷，徐刚，沈艳涛，何林基，马春伟

《智能计算机与应用》

2019

电弧增材制造304L奥氏体不锈钢的显微组织和高温力学性能研究

苏峰，马春伟，张天雷，明灿

《热加工工艺》

2016

外加横向磁场在焊接中的应用及发展

贾涵浩，马春伟，韩宁

《热加工工艺》

2016

熔体快淬工艺在制备La-Fe-Si合金中的应用与发展

韩宁，侯雪玲，马春伟，薛允，徐晖

《热加工工艺》

2015

加强车间和实验室对焊接检验教学的作用

马春伟，徐培全，任江伟，刘传根

《课程教育研究(中英文)》

2015

学生老师角色互换在焊接检验中的应用

马春伟，徐培全，任江伟，刘传根

《课程教育研究(中英文)》

2015

Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces

Jianhui Yuan, Chun-Wei Ma, Shanglei Yang, Zhishui Yu, Hua Long Li

Surface and Coatings Technology

DOI

2015

The Effect of Two Wire Submerge Welding Parameters on the Properties of Welded Joint

Chunwei Ma, Ting-Yu Liu, Ya Tang, Qing-Hua Lu, Chong-Gui Li, Hua Yan

DOI

2015

Resistance Spot Weldability of Hot-Formed Ultra High Strength Steel Based on Virtual and Physical Experiment

Zhi-Shui Yu, Wan-Peng Dong, Chunwei Ma, Jiang-Wei Ren, Bi-Hao Li, Yu-Rong Ji

DOI

2014

高强钢焊接研究现状及发展趋势

谭艳艳，马春伟

《上海工程技术大学学报》

2014

EGR(换热器)真空钎焊断裂机理研究

谭艳艳，马春伟，徐培全

《热加工工艺》

2012

TC4钛合金激光焊缝成形与显微组织分析

徐培全，马春伟，李永平，马丁，张培磊

《热加工工艺》

2012

Analysis of WC Dissolution Phenomenon Happened in TIG Welded Joint of Cemented Carbide and Invar Alloy

Pei-Quan Xu, Ding Ma, Chunwei Ma

DOI

2010

Numerical simulation of laser–tungsten inert arc deep penetration welding between WC–Co cemented carbide and invar alloys

Peiquan Xu, Chen-ming Bao, Fenggui Lu, Chun-Wei Ma, Jianping He, Haichao Cui, Shanglei Yang

The International Journal of Advanced Manufacturing Technology

DOI

2008

Numerical analysis for effect of process parameters of low-current micro-PAW on constricted arc

Peiquan Xu, Shun Yao, Jianping He, Chun-Wei Ma, Jiangwei Ren

The International Journal of Advanced Manufacturing Technology

DOI

2006

基于试验数据的焊缝试样C*参量估算

轩福贞，马春伟，涂善东，王正东

《机械工程学报》

马春伟

精选作品

期刊论文

Prediction of weld residual stresses based on numerical simulation and machine learning: a review

The prediction of residual stress of welding process based on deep neural network

Prediction of residual stresses in welded structures based on neural network: a review

熔化焊和摩擦焊残余应力分布规律分析

The Different Welding Layers and Heat Source Energy on Residual Stresses in Swing Arc Narrow Gap MAG Welding

基于ABAQUS的MAG焊接温度场数值模拟与热循环分析

焊缝宽度对碳钢对接接头残余应力分布的影响

Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni

Investigation of Distribution of Residual Stress in Swing arc Narrow Gap MAG Welding by Numerical Simulation and Experiments

窄间隙摆动电弧数值模拟

焊缝宽度对对接接头疲劳强度的影响

摆动电弧窄间隙厚板焊接工艺与熔池演变数值研究

不锈钢激光深熔焊熔池动态行为数值模拟

表面张力对激光深熔焊熔池小孔的影响

厚板窄间隙MIG焊接工艺的变形与分析

基于MIG的电弧增材制造不同层间停留时间温度场仿真模拟

基于MIG的电弧增材制造熔池行为的数值模拟

电弧增材制造304L奥氏体不锈钢的显微组织和高温力学性能研究

外加横向磁场在焊接中的应用及发展

熔体快淬工艺在制备La-Fe-Si合金中的应用与发展

加强车间和实验室对焊接检验教学的作用

学生老师角色互换在焊接检验中的应用

Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces

The Effect of Two Wire Submerge Welding Parameters on the Properties of Welded Joint

Resistance Spot Weldability of Hot-Formed Ultra High Strength Steel Based on Virtual and Physical Experiment

高强钢焊接研究现状及发展趋势

EGR(换热器)真空钎焊断裂机理研究

TC4钛合金激光焊缝成形与显微组织分析

Analysis of WC Dissolution Phenomenon Happened in TIG Welded Joint of Cemented Carbide and Invar Alloy

Numerical simulation of laser–tungsten inert arc deep penetration welding between WC–Co cemented carbide and invar alloys

Numerical analysis for effect of process parameters of low-current micro-PAW on constricted arc

基于试验数据的焊缝试样C*参量估算

研究方向