百晓学者学者目录

董建新

北京科技大学材料科学与工程学院

个人简介

董建新,北京科技大学材料科学与工程学院材料学系教授,主讲及博士生等课程。研究方向为高温合金、耐热耐蚀合金、特殊钢、材料仿真和优化设计,代表性工作涉及镍基高温合金动态再结晶机制、微量元素微合金化、粉末冶金超合金夹杂物临界尺寸数据驱动判定、中重合金组织与软化行为、晶向依赖性点蚀行为及变形高温合金制备工艺优化。

精选作品

期刊论文

  1. 蔡琦,江河,董建新(2026). 真空自耗熔速及氦冷对GH4350铸锭组织的影响. 《特殊钢》.DOI
  2. 江河,董建新,刘广华,于梦圆,班兆伟,秦江,沈国劬,赵展(2026). 工艺参数对超大型30Cr2Ni4MoV钢锭冶金质量影响研究. 《中国重型装备》.DOI
  3. 束国刚,江河,董建新,徐超,夏杰,白小龙,秦江,沈国劬(2026). 30Cr2Ni4MoV超纯净钢夹杂物特征研究. 《大型铸锻件》.DOI
  4. 冷子晗,江河,朱雄明,董建新(2026). 真空感应和电渣重熔冶炼工艺参数对GH3625合金铸锭质量的影响. 《特殊钢》.
  5. 吕梦雪,姚志浩,马存强,王晓辉,董建新(2026). GH4169高温合金环件成形全流程组织预测与验证. 《航空制造技术》.
  6. 孙攀贺,李昕,李澍,张亨年,姚凯俊,张少辉,江河,姚志浩,董建新(2026). 重型燃机用650℃级特大型GH4169高温合金透平盘制备关键技术. 《动力工程学报》.DOI
  7. 李澍,张亨年,江河,姚志浩,董建新(2026). 特大型GH4169铸锭真空自耗过程工艺优化及控制. 《航空学报》.
  8. 孙攀贺,张亨年,江河,姚志浩,董建新(2026). 大尺寸GH4169合金涡轮盘模锻过程组织演变及表面混晶层预测方法. 《大型铸锻件》.
  9. 张琰琳,陈硕,江河,董建新(2026). Inconel 718合金涡轮盘服役后一次碳化物演变规律及微区力学性能的研究. 《稀有金属材料与工程》.
  10. 魏振,江河,董建新(2026). 锭型尺寸与合金成分对镍基高温合金锭热透性的影响. 《金属热处理》.DOI
  11. 谭润芳,江河,姚志浩,董建新(2026). 紧固件高温合金应力松弛对比及机理研究. 《兵器材料科学与工程》.DOI
  12. 朱兴,江河,董建新,万志鹏(2026). 高合金化难变形高温合金GH4975热裂敏感性研究. 《稀有金属材料与工程》.
  13. 梁凯,姚志浩,付莹莹,王洪瑛,张砻耀,程健,代卫星,董建新(2026). 新型耐热合金SP2215的热变形行为. 《稀有金属材料与工程》.
  14. 孙攀贺,张亨年,张少辉,李昕,江河,姚志浩,董建新(2026). 大型GH4738合金开坯工艺研究方法及设计依据. 《稀有金属材料与工程》.
  15. 张亨年,江河,姚志浩,董建新(2026). 大型GH4738高温合金铸锭快锻机开坯过程棒料表面混晶层判据及预测控制. 《金属学报》.
  16. 张琼元,张子越,杨啊涛,吕梦雪,贺群功,姚志浩,王海洋,董建新(2026). 热处理工艺对定向凝固高温合金4777DS再结晶的影响. 《稀有金属材料与工程》.
  17. 王川,江河,董建新(2026). 加热路径对GH4738合金亚固溶温度热变形行为和组织演变的影响. 《中国有色金属学报》.
  18. 江河,李昕,徐超,刘伟,夏杰,刘广华,白小龙,董建新(2026). 基于第一性原理的杂质元素对重型燃机用钢脆化行为影响分析. 《中国冶金》.DOI
  19. 信景轩,陈庭轩,江河,董建新(2026). 高温合金GH4065合金凝固过程相析出行为及铸态组织. 《中国有色金属学报》.
  20. 李澍,钟佳,姚凯俊,江河,姚志浩,董建新(2026). 高温合金径向锻造工艺的研究进展. 《稀有金属材料与工程》.
  21. 魏振,李昕,江河,王川,董建新(2026). GH4169高温合金环轧过程组织模型适配性研究及应用. 《金属学报》.
  22. 孙攀贺,李澍,江河,董建新(2026). Monel K-500合金真空感应熔炼工艺优化依据及控制. 《稀有金属材料与工程》.
  23. 张亨年,李澍,江河,姚志浩,董建新(2026). 大型GH4738合金真空感应熔炼铸锭凝固与缩孔研究. 《兵器材料科学与工程》.DOI
  24. 张琼元,张子越,杨啊涛,姚志浩,贺群功,王海洋,董建新(2026). 喷砂对定向凝固4777DS高温合金再结晶影响及其机理研究. 《稀有金属材料与工程》.
  25. 赵晓,徐超,江河,姚志浩,董建新(2026). GH4738镍基高温合金O累积程度对疲劳性能与晶界损伤的影响及表征. 《金属学报》.
  26. Jixuan Duan, Teng An, Yu Gu, Zhongnan Bi, Jinhui Du, Jianxin Dong (2026). The Effect of Stacking Faults Networks and Lommer-Cotterell Lock on the Creep Resistance of Ni-Co Based Superalloys in Dynamic Environments. Journal of Materials Research and Technology.DOI
  27. Hongying Wang, Zhihao Yao, Jiehua Li, Dayu Li, Kaijun Yao, Jie Zhao, Jing Guo, Lei Wang, Jianxin Dong (2026). Stress-controlled fatigue damage evolution and failure mechanisms in a PM Ni-based superalloy under service conditions. Materials Science and Engineering A.DOI
  28. Muzhen Jia, Zhihao Yao, Wenyue Jin, Rong Liu, Jianxin Dong (2026). Orientation-dependent recrystallization mechanisms of DS447A superalloy during hot deformation. Materials Science and Engineering A.DOI
  29. Xu Han, Zhihao Yao, Changjie Zhao, Jingming Yang, Zhiheng Wen, Jianxin Dong (2026). AlZr2 phase evolution and mechanical properties regulation driven by segregation elimination during heat treatment of a novel refractory high-entropy alloy. Intermetallics.DOI
  30. Xu Han, Zhihao Yao, Changjie Zhao, Jingming Yang, Yimiao Zhang, Jianxin Dong (2026). Effect of hot isostatic pressing on the microstructure and mechanical properties of a novel B-containing refractory high-entropy alloy. Materials Science and Engineering A.DOI
  31. Zhen Wei, He Jiang, Jianxin Dong (2026). Coupled effect of non-isothermal hot deformation and heat treatment on microstructure evolution of GH4169 alloy. Journal of Alloys and Compounds.DOI
  32. Zhen Wei, He Jiang, Jianxin Dong (2026). Study on dynamic recrystallization mechanism during hot deformation of Haynes 242 Ni-based superalloy. Materials Characterization.DOI
  33. Wenyue Jin, Zhihao Yao, Muzhen Jia, Jianxin Dong, Rong Liu (2026). Synergistic regulation of dynamic recrystallization during hot deformation of GH4751 superalloy. Materials Characterization.DOI
  34. Zhiyang Ni, Min Guo, Zhanghua Chen, Jianxin Dong, He Jiang (2026). Derivative-free optimization for crystal plasticity parameter calibration: benchmarking, non-uniqueness, and transferability. Materials & Design.DOI
  35. Shu Li, He Jiang, Zhihao Yao, Jianxin Dong (2026). Evaluation Method for Shrinkage Porosity Tendency in Superalloys Based on Residual Liquid Parameters. Metallurgical and Materials Transactions B.DOI
  36. Xiaofeng Yan, Jianxin Dong, He Jiang (2026). Effect of Solution Treatment Temperature on Microstructural Evolution and Mechanical Properties of GH4698 Superalloy. Materials.DOI
  37. Chuan Wang, He Jiang, Jianxin Dong (2026). Simulation of Grain Growth Model for GH4738 Alloy with Steady-State Grain Size. JOM.DOI
  38. Shu Li, Jia Zhong, He Jiang, Zhihao Yao, Jianxin Dong (2026). Effect of Microstructure and Liquid Characteristics During Final Stage of Solidification on Porosity in a Difficult-to-Deform Superalloy. Metallurgical and Materials Transactions B.DOI
  39. Shuo Chen, He Jiang, Fa Cang Wang, Jianxin Dong (2026). Carbon Content and Properties of a Novel Carbide-Strengthened Ni-Based Superalloy. JOM.DOI
  40. Hongying Wang, Zhihao Yao, Ying Chen, Dayu Li, Jing Guo, Jianxin Dong (2026). Data-driven determination of the critical inclusion characteristic size in powder metallurgy superalloys. Acta Materialia.DOI
  41. Jia Zhong, He Jiang, Zhihao Yao, Jianxin Dong (2026). Dissolution Behavior and Kinetic of (γ + γ′) Eutectic Microstructure in Hard-to-Deform Ni-Base Superalloy. JOM.DOI
  42. Jia Zhong, Fa Wang, He Jiang, Jianxin Dong (2026). Ultrafine grain processing window and hot deformation mechanism in hard-to-deform GH4151 superalloy with high γ′ phases. Journal of Alloys and Compounds.DOI
  43. Shu Li, 孙攀河, Hengnian Zhang, Xin Li, Kaijun Yao, Shaohui Zhang, Tao Zhang, He Jiang, Zhihao Yao, Jianxin Dong (2026). Manufacturing of 2440 mm Diameter Gas Turbine Disc for GH4169 Superalloy. ˜The œminerals, metals & materials series.DOI
  44. He Jiang, Jianxin Dong, Maicang Zhang (2026). Hot Extrusion Characteristics and Microstructure-Based Hot Extrusion Control Principle of Alloy 617B Tube. ˜The œminerals, metals & materials series.DOI
  45. 王洪瑛,姚志浩,李大禹,郭婧,姚凯俊,董建新(2025). 高γ'相含量粉末及变形高温合金组织和力学性能的异同性. 《金属学报》.
  46. 张亨年,王川,李昕,孙攀贺,江河,姚志浩,董建新(2025). ?1500 mm级大型GH4738合金涡轮盘锻造技术和工艺控制. 《大型铸锻件》.DOI
  47. 张亨年,赵展,李澍,张涛,江河,姚志浩,董建新(2025). 大锭型GH4169合金铸锭真空感应熔炼凝固过程及缩孔控制. 《中国有色金属学报》.
  48. 钟佳,王法,江河,姚志浩,董建新(2025). 高γ′相含量GH4151变形高温合金铸态组织与开裂敏感性分析. 《金属学报》.
  49. 李澍,赵展,江河,董建新(2025). 高碳镍基高温合金凝固过程相变与热裂敏感性关联分析. 《稀有金属材料与工程》.
  50. 李大禹,姚志浩,赵杰,董建新,郭婧,赵宇(2025). FGH4720Li粉末高温合金在近服役条件下的组织与力学性能演变规律. 《金属学报》.
  51. 叶献文,姚志浩,王洪瑛,王子成,张砻耀,董建新(2025). 增材制造难变形高温合金GH4975的裂纹形成及其愈合机制. 《金属学报》.
  52. 吴雨萌,姚志浩,董建新(2025). GH4169高温合金铸锭开坯锻造的组织模拟预测研究. 《精密成形工程》.
  53. Chuan Wang, Rui Zhong, Yue Liu, He Jiang, Jianxin Dong (2025). Post-dynamic recrystallization in a Ni-based Waspaloy under non-isothermal sub-solvus thermomechanical processing. Journal of Materials Research and Technology.DOI
  54. Shu Li, Jingxuan Xin, He Jiang, Zhihao Yao, Jianxin Dong (2025). Effect of mushy zone behavior on hot cracking susceptibility of GH4065 superalloy during the final stage of solidification. Journal of Alloys and Compounds.DOI
  55. Shu Li, He Jiang, Zhihao Yao, Jianxin Dong (2025). Effect of liquid characteristics during final stage of solidification on shrinkage porosity in IN718 superalloy. Materials & Design.DOI
  56. Jilong Shen, Xiaoxiang Zhu, He Jiang, Jianxin Dong (2025). An investigation on the effect of Sc microalloying on creep property improvement in γ′-phase strengthened nickel-based superalloy. Materials Science and Engineering A.DOI
  57. Zhen Wei Wei, He Jiang, Jianxin Dong (2025). Effect of temperature and strain on microstructure evolution of GH4169 superalloy ring forging during ring rolling. Journal of Alloys and Compounds.DOI
  58. Zhiyang Ni, Min Guo, Zhanghua Chen, Jianxin Dong, He Jiang (2025). Crystal plasticity simulation of the tensile response and microstructural evolution in hastelloy X foils. Journal of Alloys and Compounds.DOI
  59. Rong Liu, Dadi Zhou, Zhihao Yao, Zihan Li, Hongying Wang, Yumeng Wu, Jianxin Dong (2025). Microstructure regulation of INCOLOY 945 Alloy: Thermomechanical-Microstructural coupling dynamic recrystallization during hot processing. Materials Science and Engineering A.DOI
  60. Hengnian Zhang, Xin Li, He Jiang, Zhihao Yao, Jianxin Dong (2025). Integrated methodology for predicting and optimizing homogenization heat treatment processes of large scale Waspaloy superalloy ingots. Journal of Alloys and Compounds.DOI
  61. Pengfei Liu, Zhanghua Chen, Xiao Ling Zhao, Jianxin Dong, He Jiang (2025). A Crystal Plasticity Phase-Field Study on the Effects of Grain Boundary Degradation on the Fatigue Behavior of a Nickel-Based Superalloy. Materials.DOI
  62. Hua Long Yu, Xin Li, He Jiang, Jianxin Dong (2025). Study on the relationship between microstructure and tensile mechanical behavior of Hastelloy X foil. Journal of Materials Research and Technology.DOI
  63. Yang Chen, Zhihao Yao, Hongying Wang, Jianxin Dong, Jialin Peng, Mo Ren, Huanyu Yang, Liuxi Leng (2025). Damage mechanism on superalloy surface of coated gas turbine vanes after long-term service. Engineering Failure Analysis.DOI
  64. Chuan Wang, Xin Li, He Jiang, Jianxin Dong (2025). Evolution of Microstructure in Waspaloy During Profiled Ring Rolling Process. Metallurgical and Materials Transactions A.DOI
  65. Jixuan Duan, Teng An, Yu Gu, Jinhui Du, Jianxin Dong (2025). Effects of grain size on the stacking fault propagation behavior at interrupted-creep process of new Ni-Co based superalloy. Materials Science and Engineering A.DOI
  66. Yajing Li, Jingming Yang, Zhihao Yao, Wenyuan Zhao, Yingying Fu, Z.-Z. Jin, Jianxin Dong, Lei Jin (2025). Effect of Zr on microstructure and mechanical properties of novel Al0.5Mo0.5NbTi1.25V0.5Zrx lightweight refractory high-entropy alloys. Journal of Alloys and Compounds.DOI
  67. Wannian Wang, Zhanxing Chen, Tengfei Ma, Xiaohong Wang, Gang Qin, Ruirun Chen, Guoxin Cao, Jianxin Dong (2025). In-situ synthesized duplex core–shell heterostructures in hypoeutectic Ni–W medium–heavy alloys: a strategy for ultrahigh strength. Materials Research Letters.DOI
  68. Guoxin Cao, Jianxin Dong, Yongsheng He, He Jiang, Hao Fang, Zhihua Nie, Tengfei Ma, Baoquan Fu (2025). Effect of Co element on microstructure and softening behavior of NiW medium heavy alloy. Intermetallics.DOI
  69. Guoxin Cao, Jianxin Dong, Guoliang Xie, Zhihua Nie, Tengfei Ma, Baoquan Fu (2025). A Novel Ni‐42W‐10Co‐1Mo Medium–Heavy Alloy with Excellent Static/Dynamic Properties. Advanced Engineering Materials.DOI
  70. Guo-xin Cao, Jianxin Dong, Yong-sheng He, He Jiang, Hao Fang, Zhihua Nie, Tengfei Ma, Bao-quan Fu (2025). Positive effect of Mo on mechanical properties of a Ni-42W-10Co-xMo medium heavy alloy. China Foundry.DOI
  71. 曹国鑫,董建新,张胜,姚志浩,解国良,聂志华,马腾飞,付宝全(2024). 超高W含量NiW中/重合金热加工行为研究. 《稀有金属材料与工程》.
  72. 余华,李昕,江河,姚志浩,董建新(2024). 碳化物特征对GH3536合金冷变形损伤的影响及控制. 《金属学报》.
  73. 王京京,姚志浩,张鹏,赵杰,张迈,王蕾,董建新,陈迎(2024). 镍基高温合金中S元素对基体与热障涂层界面稳定性的影响. 《金属学报》.
  74. Shuo Chen, Jiang He, Fa Wang, Jianxin Dong (2024). Potential of carbide strengthened economical wrought nickel-based alloy for high temperature. Journal of Materials Research and Technology.DOI
  75. Yingying Fu, Zhihao Yao, Yang Chen, Hongying Wang, Yajing Li, Dong Jianxin (2024). Progress in the Deposition Mechanisms and Key Performance Evaluation of Thermal Barrier Coatings for Turbine Blades: A Review. Acta Metallurgica Sinica (English Letters).DOI
  76. Yumeng Wu, Zhihao Yao, Longyao Zhang, Kaijun Yao, Hongying Wang, Jianxin Dong (2024). Microstructural characteristics and mechanism of recrystallization during hot deformation for GH4141 Ni-based superalloy. Materials Characterization.DOI
  77. Hengnian Zhang, Shu Li, Xin Li, He Jiang, Zhihao Yao, Jianxin Dong (2024). A Simulation Method for Predicting Shrinkage Cavity and Cracking Tendency in Waspaloy Vacuum Induction Melting Ingot. Journal of Materials Engineering and Performance.DOI
  78. Pengfei Liu, Zhanghua Chen, Chao Xu, Jianxin Dong, He Jiang (2024). A crystal plasticity phase-field model for microstructure sensitive fatigue crack growth in a superalloy. Engineering Fracture Mechanics.DOI
  79. Shu Li, Zhankui Zhao, Tao Zhang, Xin Li, Tingxuan Chen, He Jiang, Jianxin Dong (2024). Integrated simulation method and experimental validation for the vacuum induction melting process. Journal of Materials Research and Technology.DOI
  80. Yang Chen, Zhihao Yao, Jingjing Wang, Jianxin Dong, Mo Ren, Jialin Peng, Huanyu Yang, Liuxi Leng (2024). Microstructural evolution and diffusion mechanism of MCrAlY coated nickel-based superalloy turbine blades after serviced for 47,000 h. Surface and Coatings Technology.DOI
  81. Hengnian Zhang, Xin Li, Tao Zhang, He Jiang, Zhihao Yao, Jianxin Dong (2024). Remelting Model and Cracking Criterion for Vacuum Arc Remelting of Superalloys: Taking IN718 as an Example. Metallurgical and Materials Transactions B.DOI
  82. Kaijun Yao, Zhihao Yao, Qingguo Ren, Jie Zhao, Yumeng Wu, Cheng Qin, Jianxin Dong, Maicang Zhang (2024). Difference in hot deformation behavior of a Ni–Fe based superalloy through cast-wrought and additive manufactured processes. Materials Science and Engineering A.DOI
  83. Yang Chen, Zhihao Yao, Jianxin Dong, Huanyu Yang, Mo Ren, Jialin Peng, Liuxi Leng, Xiaoming Zhang, Jingming Yang (2024). Microstructural deterioration mechanism of directionally solidified Ni-based superalloy used in first-stage industrial gas turbine blades after ultra long-term service. Materials Characterization.DOI
  84. Haoran Peng, Yueguang Yu, Jianxin Dong, Tianjie Shi, Kang Yuan, Zheng Yan, Botian Bai (2024). The Effects of Induction Plasma Spheroidization on the Properties of Yttrium-Stabilized Zirconia Powders and the Performance of Corresponding Thermal Barrier Coatings for Gas Turbine Engine Applications. Coatings.DOI
  85. Hua Long Yu, Xin Li, He Jiang, Jianxin Dong (2024). Influence of initial heat treatment on microstructure evolution and mechanical properties during cold rolling and annealing of Hastelloy X. Journal of Alloys and Compounds.DOI
  86. 姚汉新,江河,姚志浩,董建新(2023). 超超临界机组转子COST-FB2钢630℃长期时效稳定性研究. 《稀有金属材料与工程》.
  87. 王法,江河,董建新(2023). 基于热加工图的均匀化态GH4151合金热变形行为研究. 《稀有金属材料与工程》.
  88. 江河,佴启亮,徐超,赵晓,姚志浩,董建新(2023). 镍基高温合金疲劳裂纹急速扩展敏感温度及成因. 《金属学报》.
  89. 孙蓉蓉,姚美意,王皓瑜,张文怀,胡丽娟,仇云龙,林晓冬,谢耀平,杨健,董建新,成国光(2023). Fe22Cr5Al3Mo-xY合金在模拟LOCA下的高温蒸汽氧化行为. 《金属学报》.
  90. 王法,江河,董建新(2023). 高合金化GH4151合金复杂析出相演变行为. 《金属学报》.
  91. 梁凯,姚志浩,谢锡善,姚凯俊,董建新(2023). 新型耐热合金SP2215组织与性能的关联性. 《金属学报》.
  92. 李昕,江河,姚志浩,董建新(2023). O原子对高温合金基体Ni、Co和NiCr晶界作用的理论计算分析. 《金属学报》.
  93. 任庆国,姚志浩,董建新,叶献文(2023). 激光增材制造高温合金复合材料研究进展. 《稀有金属材料与工程》.
  94. 姚汉新,江河,姚志浩,董建新(2023). 超超临界机组转子钢FB2持久性能和组织演变研究. 《稀有金属材料与工程》.
  95. Wenyuan Zhao, Qingguo Ren, Zhihao Yao, Jie Zhao, He Jiang, Jianxin Dong (2023). Multi-scale Calculation-Aided Composition Optimization Design of Low-Density and High-Strength Nickel-Based Superalloy. Metallurgical and Materials Transactions A.DOI
  96. Chonglin Pan, Zhihao Yao, Yiwei Ma, Dayu Li, Kaijun Yao, Yang Chen, Jianxin Dong (2023). Solidification microstructure characteristics and their formation mechanism of K447A nickel-based superalloy for dual-performance blisk. Materials Characterization.DOI
  97. Xin Li, Tao Zhang, He Jiang, Jianxin Dong (2023). Predicting the three-dimensional grain structure of superalloys during vacuum arc remelting process. Journal of Materials Research and Technology.DOI
  98. Pengfei Liu, He Jiang, Jianxin Dong, Zhanghua Chen (2023). Effect of micron-scale nonmetallic inclusions on fatigue crack nucleation in a nickel-based superalloy. International Journal of Solids and Structures.DOI
  99. He Jiang, Wang Fa, Jianxin Dong (2023). Potential for carbide dispersive precipitation strengthening Ni-based alloy for high temperature. Journal of Materials Research and Technology.DOI
  100. 孙蓉蓉,姚美意,林晓冬,张文怀,仇云龙,胡丽娟,谢耀平,杨健,董建新,成国光(2022). 添加Ti对Fe22Cr5Al3Mo合金在500℃过热蒸汽中腐蚀行为的影响. 《金属学报》.
  101. 马祎炜,姚志浩,李大禹,刘梦飞,董建新,盖其东(2022). 高γ′含量高温合金整体细晶叶盘铸造凝固行为和组织特征模拟研究. 《稀有金属材料与工程》.
  102. 姚凯俊,姚志浩,王强,董建新,赵文源,潘崇林(2022). 高温合金涡轮盘制备数值模拟方法研究进展. 《稀有金属材料与工程》.
  103. 李昕,赵展,董建新,仇云龙(2022). 825合金斜轧穿孔过程的温升和应力分布. 《稀有金属材料与工程》.
  104. 王法,江河,董建新(2022). 放电等离子烧结制备对Ni/SiCf界面反应的影响. 《稀有金属材料与工程》.
  105. 江河,杨健,董建新(2022). 工程案例在材料分析方法课程教学中的应用. 《中国冶金教育》.
  106. Zhihao Yao, Jie Shan Hou, Yang Chen, Wenyong Xu, He Jiang, Jianxin Dong (2022). Effect of micron-sized particles on the crack growth behavior of a Ni-based powder metallurgy superalloy. Materials Science and Engineering A.DOI
  107. Hanxin Yao, Jianxin Dong, Zhihua Gong, Jiqing Zhao, Gang Yang (2022). Influence of Replacing Molybdenum with Tungsten on the Creep Fracture Property of Waspaloy Nickel-Based Alloy. Metals.DOI
  108. He Jiang, Xuemei Xiang, Jianxin Dong (2022). The morphology and characteristics evolution of MC carbide during homogenization in hard-to-deform superalloy GH4975. Journal of Alloys and Compounds.DOI
  109. Yang Chen, Zhihao Yao, Jianxin Dong, Wenyuan Zhao, Hang Xiao, Xi Chen (2022). Molecular dynamics simulation of the γ’ phase deformation behaviour in nickel-based superalloys. Materials Science and Technology.DOI
  110. Fa Wang, He Jiang, Zhihao Yao, Jianxin Dong (2022). Interface instability of SiCf-reinforced superalloy matrix composites. Journal of Alloys and Compounds.DOI
  111. He Jiang, Xuemei Xiang, Jianxin Dong (2022). The relationship between microstructure evolution and impact toughness degeneration of alloy 617B during long term aging. Journal of Materials Research and Technology.DOI
  112. 江河,王法,李昕,董建新(2021). SiC纤维增强高温合金复合材料可行性分析. 《稀有金属材料与工程》.
  113. 江河,李姚军,刘其源,董建新(2021). 终锻温度对GH4738高温合金热变形行为的影响. 《稀有金属材料与工程》.
  114. 刘超,姚志浩,江河,董建新(2021). GH4720Li合金毫米级粗大晶粒热变形获得均匀等轴晶粒的可行性及工艺控制. 《金属学报》.
  115. 刘超,姚志浩,郭婧,彭子超,江河,董建新(2021). 粉末高温合金FGH4720Li在近服役温度下的组织演变规律. 《金属学报》.
  116. 张慧,江河,董建新(2021). 重型燃气轮机燃烧室用高温合金研究进展. 《兵器材料科学与工程》.DOI
  117. 江河,何方有,许亮,董建新(2021). 高温合金环形件环轧工艺研究进展. 《稀有金属材料与工程》.
  118. Rongrong Sun, Meiyi Yao, Jie Zhang, Haoyu Wang, Xiaodong Lin, Wenhuai Zhang, Yunlong Qiu, Jian Yang, Guoguang Cheng, Jianxin Dong (2021). Effect of Y on the corrosion behavior of Fe22Cr5Al3Mo alloy in 500 ℃ super-heated steam. Corrosion Science.DOI
  119. Wenhuai Zhang, Yue Hong Qian, Rongrong Sun, Xiaodong Lin, Meiyi Yao, Yunlong Qiu, Jian Yang, Guoguang Cheng, Jianxin Dong (2021). Oxidation characteristics of Fe22Cr5Al3Mo-xNb alloys in high temperature steam. Corrosion Science.DOI
  120. Dekun Liu, Jian Yang, Yinhui Zhang, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2021). Effect of Welding Heat Input on the Microstructure and Impact Toughness of HAZ in 420 MPa-Grade Offshore Engineering Steel. Frontiers in Materials.DOI
  121. 钱月,孙蓉蓉,张文怀,姚美意,张金龙,周邦新,仇云龙,杨健,成国光,董建新(2020). Nb对Fe22Cr5Al3Mo合金显微组织和耐腐蚀性能的影响. 《金属学报》.
  122. 向雪梅,江河,董建新,姚志浩(2020). 难变形高温合金GH4975的铸态组织及均匀化. 《金属学报》.
  123. Xiaoqian Pan, Jian Yang, Qingdong Zhong, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2020). Effects of coarse particles, prior austenite grains, and microstructures on impact toughness in heat-affected zone of Mg deoxidation steel plates without or with Al addition. Ironmaking & Steelmaking Processes Products and Applications.DOI
  124. Zhihao Yao, Biao Zhou, Kaijun Yao, Hongying Wang, Jianxin Dong, Theresa Davey (2020). Influence and Sensitivity of Temperature and Microstructure on the Fluctuation of Creep Properties in Ni-Base Superalloy. Materials.DOI
  125. He Jiang, Jianxin Dong, Maicang Zhang, Jiang-Yang Li (2020). A new insight into rapid oxidation of alloy 925 contaminated by oxide powder. Rare Metals.DOI
  126. Zhihao Yao, Hongying Wang, Jianxin Dong, Jinglin Wang, He Jiang, Biao Zhou (2020). Characterization of Hot Deformation Behavior and Dislocation Structure Evolution of an Advanced Nickel-Based Superalloy. Metals.DOI
  127. Fa Wang, He Jiang, Jianxin Dong, Zhihao Yao (2020). A study of reaction processes in SiC fiber reinforced Ni-Fe matrix composite during HIP. Composite Interfaces.DOI
  128. Chao Liu, He Jiang, Jianxin Dong, Zhihao Yao, Yongji Niu (2020). Cold deformation mechanism of cobalt-base superalloy GH5605. Materials Letters.DOI
  129. Siwei Wu, Jian Yang, Guangming Cao, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2020). Elevating Prediction Performance for Mechanical Properties of Hot-Rolled Strips by Using Semi-Supervised Regression and Deep Learning. IEEE Access.DOI
  130. 杜金辉,吕旭东,董建新,孙文儒,毕中南,赵光普,邓群,崔传勇,马惠萍,张北江(2019). 国内变形高温合金研制进展. 《金属学报》.
  131. 颜晓峰,董建新,石照夏,段春华(2019). 镍基高温合金GH4282的凝固和偏析行为. 《稀有金属材料与工程》.
  132. 江河,董建新,张麦仓,姚志浩,杨静(2019). 服役条件下镍基高温合金应力松弛微观机制. 《金属学报》.
  133. 向雪梅,董建新,江河,姚志浩,孙林根(2019). 617B镍基高温合金长期时效组织演变. 《稀有金属材料与工程》.
  134. Jing Yang, Jianxin Dong, He Jiang, Zhihao Yao (2019). “Ʌ”-shaped trend of stress relaxation stability of Inconel718 superalloy with initial stress increasing. Materialia.DOI
  135. Yinhui Zhang, Jian Yang, Longyun Xu, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2019). The Effect of Ca Content on the Formation Behavior of Inclusions in the Heat Affected Zone of Thick High-Strength Low-Alloy Steel Plates after Large Heat Input Weldings. Metals.DOI
  136. He Jiang, Chao Liu, Jianxin Dong, Maicang Zhang (2019). The effect of Mo and Ti elements on long-term microstructure stability of 617B nickel-base superalloy. Journal of Alloys and Compounds.DOI
  137. Kai Chen, Jianxin Dong, Zhihao Yao (2019). Creep Failure and Damage Mechanism of Inconel 718 Alloy at 800–900 °C. Metals and Materials International.DOI
  138. Zeyu Zhao, Jianxin Dong (2019). Effect of Eutectic Characteristics on Hot Tearing of Cast Superalloys. Journal of Materials Engineering and Performance.DOI
  139. He Jiang, Jianxin Dong, Maicang Zhang, Weimin Guo (2019). Microstructural Evolution and Oxidation Behavior of Alloy Ni-13Mo-13Cr-9W-3Fe-3Ti-2Al During Isothermal Exposure at 900 °C. Metallurgical and Materials Transactions A.DOI
  140. Kai Chen, Shu-yuan Rui, Fa Wang, Jianxin Dong, Zhihao Yao (2019). Microstructure and homogenization process of as-cast GH4169D alloy for novel turbine disk. International Journal of Minerals Metallurgy and Materials.DOI
  141. C. Xu, Zhihao Yao, Jianxin Dong (2019). The sharp drop in fatigue crack growth life at a critical elevated temperature for a PM Ni-based superalloy FGH97. Materials Science and Engineering A.DOI
  142. Xuemei Xiang, Zhihao Yao, Jianxin Dong, Lingen Sun (2019). Dissolution behavior of intragranular M23C6 carbide in 617B Ni-base superalloy during long-term aging. Journal of Alloys and Compounds.DOI
  143. Haiyan Fan, He Jiang, Jianxin Dong, Zhihao Yao, Maicang Zhang (2019). An optimization method of upsetting process for homogenized, nickel-based superalloy Udimet 720Li ingot considering both cracking and recrystallization. Journal of Materials Processing Technology.DOI
  144. 李郑周,佴启亮,莫少华,王宝顺,王曼,董建新(2018). 热处理对四代核电用镍基合金薄壁管组织与性能的影响. 《工程科学学报》.
  145. 沈祎舜,姚志浩,陈筱菲,董建新,江河(2018). GH105合金元素含量对析出相的影响. 《有色金属材料与工程》.
  146. 李景阳,董建新,姚志浩,张麦仓(2018). 镍基耐蚀925合金均匀化及固溶过程组织演变规律. 《稀有金属材料与工程》.
  147. 李郑周,佴启亮,王宝顺,苏诚,董建新(2018). 高应变速率对690合金热变形及可挤性的影响. 《稀有金属材料与工程》.
  148. 李郑周,佴启亮,王宝顺,苏诚,杨亮,董建新(2018). 热挤压工艺对690合金组织的影响及控制. 《稀有金属材料与工程》.
  149. He Jiang, Jianxin Dong, Maicang Zhang (2018). The characteristics of μ phase precipitated during 720 °C long-term aging in alloy 617B. Journal of Materials Research and Technology.DOI
  150. He Jiang, Jianxin Dong, Maicang Zhang (2018). The phase decomposition with related element interaction and redistribution during long term aging of 740H superalloy. Journal of Alloys and Compounds.DOI
  151. Kai Chen, Jianxin Dong, Zhihao Yao, Tong-Wei Ni, Minqing Wang (2018). Creep performance and damage mechanism for Allvac 718Plus superalloy. Materials Science and Engineering A.DOI
  152. Chao Xu, Zhihao Yao, Jianxin Dong, Yukun Jiang (2018). Mechanism of high‐temperature oxidation effects in fatigue crack propagation and fracture mode for FGH97 superalloy. Rare Metals.DOI
  153. He Jiang, Jianxin Dong, Maicang Zhang (2018). Phase transformation of alloy 617B during 10000 h aging: An element redistribution-related process. Journal of Alloys and Compounds.DOI
  154. He Jiang, Linhan Li, Jianxin Dong, Xishan Xie (2018). Microstructure-based hot extrusion process control principles for nickel-base superalloy pipes. Progress in Natural Science Materials International.DOI
  155. Jing Yang, He Jiang, Zhihao Yao, Jianxin Dong (2018). Limitations of calculating stress relaxation limit by function-fitting of Inconel718 superalloy. Materials Letters.DOI
  156. Lina Zhang, Jerzy A. Szpunar, Jianxin Dong, Olanrewaju Akanbi Ojo, Xu Wang (2018). Dependence of Crystallographic Orientation on Pitting Corrosion Behavior of Ni-Fe-Cr Alloy 028. Metallurgical and Materials Transactions B.DOI
  157. 江河,董建新,张麦仓,姚志浩(2017). 700℃超超临界锅炉材料617B合金冷变形和退火过程中的组织演变. 《中国有色金属学报》.
  158. 佴启亮,董建新,张麦仓,郑磊,姚志浩,曲敬龙(2017). GH4720Li合金疲劳裂纹扩展速率的温度敏感性. 《稀有金属材料与工程》.
  159. 李浩宇,董建新,李林翰(2017). GH4738合金均匀化过程组织演变及热变形行为. 《材料热处理学报》.
  160. 姚志浩,董建新,张麦仓,张玉峰,谢伟,李蓬川(2017). 高强GH4738合金成分设计计算与验证. 《稀有金属材料与工程》.
  161. 赵展,李景阳,董建新,姚志浩,张麦仓(2017). 925镍铁基耐蚀合金均匀化及高温氧化行为. 《中国腐蚀与防护学报》.
  162. 高亚伟,董建新,姚志浩,张麦仓,牛永吉(2017). GH5188高温合金组织特征及冷热加工过程组织演变. 《稀有金属材料与工程》.
  163. 孟凡国,董建新,吴剑涛,李俊涛(2017). 镍基合金热挤压工艺参数的影响规律分析. 《钢铁研究学报》.
  164. 朱擎,董建新,张麦仓,姚志浩(2017). GH4738高温合金的应力松弛影响因素. 《稀有金属材料与工程》.
  165. 陈佳语,于秋颖,董建新,张麦仓,姚志浩(2017). GH720Li合金γ'相回溶过程对后续析出的遗传影响. 《稀有金属材料与工程》.
  166. 王玲,许斌斌,刘林,董建新(2017). 重熔温度对Inconel718定向凝固过程中糊状区偏析和Rayleigh数的影响. 《稀有金属材料与工程》.
  167. 徐超,佴启亮,姚志浩,江河,董建新(2017). 晶界氧化对GH4738高温合金疲劳裂纹扩展的作用. 《金属学报》.
  168. He Jiang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2017). Phenomenological model for the effect of strain rate on recrystallization and grain growth kinetics in the 617B alloy. Journal of Alloys and Compounds.DOI
  169. Xiaofei Chen, Zhihao Yao, Jianxin Dong, Hongwei Shen, Yu Wang (2017). The effect of stress on primary MC carbides degeneration of Waspaloy during long term thermal exposure. Journal of Alloys and Compounds.DOI
  170. Tong-Wei Ni, Jianxin Dong (2017). Creep behaviors and mechanisms of Inconel718 and Allvac718plus. Materials Science and Engineering A.DOI
  171. Zhihao Yao, Ya-Ting Ruan, Jianxin Dong, Qiuying Yu, Shiqing Zhang, Xi Chen (2017). Study on Gamma Prime and Carbides of Alloy A286 by Traditional Thermodynamic Calculation. High Temperature Materials and Processes.DOI
  172. Zhihao Yao, Shao-cong Wu, Jianxin Dong, Qiuying Yu, Maicang Zhang, Guangwei Han (2017). Constitutive behavior and processing maps of low-expansion GH909 superalloy. International Journal of Minerals Metallurgy and Materials.DOI
  173. 李俊涛,燕平,吴剑涛,董建新,王磊,曾强(2016). 新型高强抗热腐蚀定向凝固高温合金DZ409. 《钢铁研究学报》.
  174. 佴启亮,董建新,张麦仓,姚志浩(2016). 多组织因素对GH4738合金裂纹扩展速率的交互影响. 《金属学报》.
  175. 江河,董建新,张麦仓,姚志浩(2016). 700℃超超临界锅炉管用617B合金时效组织演变. 《稀有金属材料与工程》.
  176. 邵卫东,董建新(2016). 析出相对UNS N08028合金腐蚀行为的影响. 《金属功能材料》.
  177. 姚志浩,阮雅婷,董建新,张十庆,张麦仓,倪童伟,秦琴(2016). 固溶时效热处理对A286合金组织演变规律的影响. 《材料热处理学报》.
  178. He Jiang, Jianxin Dong, Maicang Zhang, Zhihao Yao, Jue Wang (2016). A Study on the Recrystallization Behavior of Ni-Based Alloy G3 During Hot Deformation. Journal of Materials Engineering and Performance.DOI
  179. Xishan Xie, Chengyu Chi, Hongyao Yu, Jianxin Dong, Maicang Zhang, Yaohe Hu, Hui Dong Yang, Cheng Zhu, Jianxin Song, Qiuhua Zhu, Zhengqiang Cui, Fusheng Lin (2016). Research and Development of a New Austenitic Heat-Resisting Steel SP2215 for 600-620°C USC Boiler Superheater/Reheater Application. Advances in materials technology for fossil power plants :.DOI
  180. Yuzhou Wang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2016). Stress relaxation behavior and mechanism of AEREX350 and Waspaloy superalloys. Materials Science and Engineering A.DOI
  181. He Jiang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2016). A Study on the Effect of Strain Rate on the Dynamic Recrystallization Mechanism of Alloy 617B. Metallurgical and Materials Transactions A.DOI
  182. Jiayu Chen, Jianxin Dong, Maicang Zhang, Zhihao Yao (2016). Deformation mechanisms in a fine-grained Udimet 720LI nickel-base superalloy with high volume fractions of γ′ phases. Materials Science and Engineering A.DOI
  183. He Jiang, Jianxin Dong, Maicang Zhang, Lei Zheng, Zhihao Yao (2016). Hot corrosion behavior and mechanism of FGH96 P/M superalloy in molten NaCl–Na 2 SO 4 salts. Rare Metals.DOI
  184. He Jiang, Liang Yang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2016). The recrystallization model and microstructure prediction of alloy 690 during hot deformation. Materials & Design.DOI
  185. Jue Wang, Jianxin Dong, Maicang Zhang (2016). Nucleation mechanisms of dynamic recrystallization for G3 alloy during hot compression. Rare Metals.DOI
  186. Qiuying Yu, Zhihao Yao, Jianxin Dong (2016). Hot deformation behavior of uniform fine-grained GH4720Li alloy based on its processing map. International Journal of Minerals Metallurgy and Materials.DOI
  187. 彭以超,张麦仓,杜晨阳,董建新(2015). 服役态Cr35Ni45Nb合金高温真空渗碳行为及相演化机理研究. 《金属学报》.
  188. 董建新,李林翰,李浩宇,张麦仓,姚志浩(2015). 高温合金铸锭均匀化程度对开坯热变形的再结晶影响. 《金属学报》.
  189. 孟凡国,董建新,张麦仓,姚志浩(2015). 镍基合金028时效析出规律及转变动力学. 《稀有金属材料与工程》.
  190. 叶建水,董建新,张麦仓,谢锡善(2015). 700℃超超临界电站锅炉用高温合金617B和740H管道氩弧焊接头微观组织特征. 《稀有金属材料与工程》.
  191. 江河,董建新,张麦仓,姚志浩(2015). 700℃超超临界锅炉过热器管材Inconel 740H合金冷变形行为研究. 《稀有金属材料与工程》.
  192. 肖将楚,张麦仓,彭以超,董建新(2015). Incoloy800H合金管材服役过程的开裂机制. 《材料热处理学报》.
  193. 于秋颖,姚志浩,董建新,张盼达,韩刚(2015). 难变形高温合金GH4720Li的超塑性变形行为. 《材料热处理学报》.
  194. 赵薇,董建新,张麦仓,姚志浩(2015). GH4169、GH4169plus和GH4738高温合金组织稳定性. 《材料热处理学报》.
  195. 李明扬,叶建水,章清泉,傅祖明,董建新,谢锡善(2015). 一种Ni-Cr-Co型镍基合金接头组织性能分析. 《矿冶》.
  196. 顾宝兰,董建新,徐彤(2015). T92钢700℃高温时效组织与性能. 《材料热处理学报》.
  197. 彭以超,张麦仓,肖将楚,杜晨阳,董建新(2015). 真空渗碳处理对Cr35Ni45Nb合金高温持久寿命的影响. 《材料热处理学报》.
  198. 江河,叶建水,董建新,张麦仓,姚志浩(2015). 超超临界电站用GH4740H合金焊接接头组织特征研究. 《第十三届中国高温合金年会摘要文集》.
  199. Fangfang Liu, Jiayu Chen, Jianxin Dong, Maicang Zhang, Zhihao Yao (2015). The hot deformation behaviors of coarse, fine and mixed grain for Udimet 720Li superalloy. Materials Science and Engineering A.DOI
  200. He Jiang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2015). Evolution of twins and substructures during low strain rate hot deformation and contribution to dynamic recrystallization in alloy 617B. Materials Science and Engineering A.DOI
  201. Yunsheng Wu, Maicang Zhang, Xishan Xie, Jianxin Dong, Fusheng Lin, Shuangqun Zhao (2015). Hot deformation characteristics and processing map analysis of a new designed nickel-based alloy for 700 °C A-USC power plant. Journal of Alloys and Compounds.DOI
  202. Qiangliang Yu, Zhihao Yao, Jianxin Dong (2015). Deformation and recrystallization behavior of a coarse-grain, nickel-base superalloy Udimet720Li ingot material. Materials Characterization.DOI
  203. He Jiang, Jianxin Dong, Maicang Zhang, Lei Zheng, Zhihao Yao (2015). Hot deformation characteristics of Alloy 617B nickel-based superalloy: A study using processing map. Journal of Alloys and Compounds.DOI
  204. Yichao Peng, Maicang Zhang, Jiangchu Xiao, Jianxin Dong, Chenyang Du (2015). Investigations on carburizing mechanisms of Cr35Ni45Nb subjected to different service conditions in a high-temperature vacuum environment. Journal of materials research/Pratt's guide to venture capital sources.DOI
  205. He Jiang, Jianxin Dong, Maicang Zhang, Lei Zheng, Zhihao Yao (2015). Oxidation Behavior and Mechanism of Inconel 740H Alloy for Advanced Ultra-supercritical Power Plants Between 1050 and 1170 °C. Oxidation of Metals.DOI
  206. Jiayu Chen, Panda Zhang, Jianxin Dong, Maicang Zhang, Zhihao Yao (2015). Relevance of Primary γ′ Dissolution and Abnormal Grain Growth in UDIMET 720LI. MATERIALS TRANSACTIONS.DOI
  207. 李林翰,董建新,张麦仓,姚志浩(2014). GH4738合金涡轮盘锻造过程的集成式模拟及应用. 《金属学报》.
  208. 孟凡国,董建新,张麦仓,姚志浩(2014). 028合金热变形行为及加工图. 《材料热处理学报》.
  209. 宋若康,张麦仓,杜晨阳,董建新(2014). Cr35-Ni45炉管服役过程中的结焦机理和组织特征. 《材料热处理学报》.
  210. 江河,董建新,张麦仓,姚志浩(2014). 700℃超超临界用锅炉管材617合金研究进展. 《世界钢铁》.
  211. 王璞,董建新(2014). 晶界碳化物对GH864合金裂纹扩展速率的影响. 《稀有金属材料与工程》.
  212. 宋若康,张麦仓,杜晨阳,董建新(2014). Cr35Ni45钢高温长期服役过程中的组织演化规律分析. 《稀有金属材料与工程》.
  213. 王璞,董建新(2014). 固溶处理对GH864合金裂纹扩展速率的影响. 《稀有金属材料与工程》.
  214. 姚志浩,郭会明,董建新,张麦仓,于秋颖,何胜春(2014). 单晶高温合金DD6热变形再结晶行为. 《材料热处理学报》.
  215. 王璞,董建新,张义文(2014). 长期时效过程中FGH97合金γ′相演化规律. 《稀有金属材料与工程》.
  216. 李云婷,董建新,张麦仓,贾新云(2014). IC10合金的组织特征及B对合金组织的影响. 《稀有金属材料与工程》.
  217. 曹国鑫,张麦仓,董建新,姚志浩,郑磊(2014). Nb含量对GH4169合金钢锭凝固及均匀化过程相演化规律的影响. 《稀有金属材料与工程》.
  218. 姚志浩,董建新,张麦仓,陈昊(2014). 铸造高温合金K480及DD407热处理中γ'相的析出行为. 《材料热处理学报》.
  219. 孟凡国,董建新,张麦仓,姚志浩(2014). 镍基耐蚀合金028平衡相的析出行为. 《中国有色金属学报》.
  220. 吴保平,李林翰,吴剑涛,王祯,董建新,李俊涛(2014). 固溶温度对铸造waspaloy合金组织的影响. 《材料热处理学报》.
  221. 彭以超,张麦仓,肖将楚,董建新,杜晨阳(2014). 组织损伤对Cr35Ni45Nb钢蠕变持久寿命的影响. 《材料热处理学报》.
  222. Jinhui Du, Qun Deng, Jianxin Dong, Xishan Xie, Zhigang Wang, Changhong Zhao, Guosheng Chen, Wei Dong Xie, Tongwei Luo, Xincai Wang, Yong Zhang (2014). Recent Progress of Manufacturing Technologies on C&W Superalloys in China.DOI
  223. Zhihao Yao, Linhan Li, Maicang Zhang, Jianxin Dong, Xishan Xie (2014). Research on Large‐Scale Turbine Disk of Wrought GH4738 Superalloy Using Microstructure Evolution Precision Control Models Combined with Integrated Simulation Methods.DOI
  224. Bao-ping Wu, Linhan Li, Jiantao Wu, Zhen Wang, Yanbin Wang, Xingfu Chen, Jianxin Dong, Jun‐Tao Li (2014). Effect of boron addition on the microstructure and stress-rupture properties of directionally solidified superalloys. International Journal of Minerals Metallurgy and Materials.DOI
  225. L.N. Zhang, Jerzy A. Szpunar, Jianxin Dong, M.C. Zhang (2014). Influence of heat treatment on the microstructure and corrosion behavior of Ni–Fe–Cr alloy 028. Journal of materials research/Pratt's guide to venture capital sources.DOI
  226. Zhaoxia Shi, Jianxin Dong, Maicang Zhang, Lei Zheng (2014). Solidification characteristics and hot tearing susceptibility of Ni-based superalloys for turbocharger turbine wheel. Transactions of Nonferrous Metals Society of China.DOI
  227. Zhihao Yao, Yao Yao, Jianxin Dong, Maicang Zhang (2014). Pulsed electric current bonding between Ni-based single crystal and powder metallurgy superalloys. Materials Letters.DOI
  228. Lina Zhang, Jerzy A. Szpunar, Ritwik Basu, Jianxin Dong, Maicang Zhang (2014). Influence of cold deformation on the corrosion behavior of Ni–Fe–Cr alloy 028. Journal of Alloys and Compounds.DOI
  229. He Jiang, Jianxin Dong, M.C. Zhang (2014). Manufacture process design of Inconel 617B superheater tubes for ultra-supercritical power plants. Materials Research Innovations.DOI
  230. Bao-ping Wu, Linhan Li, Jiantao Wu, Zhen Wang, Yanbin Wang, Xingfu Chen, Jianxin Dong, Jun‐Tao Li (2014). Microstructure and stress rupture properties of polycrystal and directionally solidified castings of nickel-based superalloys. International Journal of Minerals Metallurgy and Materials.DOI
  231. 王浩宇,赵薇,董建新,张麦仓,姚志浩(2013). 基于Deform-3D和正交实验法的GH4169合金涡轮盘热模锻工艺优化. 《锻压技术》.
  232. 姚志浩,董建新,张麦仓,郑磊,于秋颖(2013). GH738高温合金热加工行为. 《稀有金属材料与工程》.
  233. 于秋颖,董建新,张麦仓,谢锡善,姚志浩(2013). 热处理制度对超超临界电站用GH80A合金组织和性能的影响. 《稀有金属材料与工程》.
  234. 叶校瑛,董建新,张麦仓(2013). GH738合金冷变形及中间退火再结晶行为研究. 《稀有金属材料与工程》.
  235. 王珏,吴赟,董建新,张麦仓,谢锡善,徐芳泓(2013). 700℃超超临界锅炉材料GH4700合金铸态组织及均匀化工艺. 《稀有金属材料与工程》.
  236. 吴赟,王珏,董建新,张麦仓(2013). 超超临界电站用617合金的组织特征及平衡相析出规律. 《稀有金属材料与工程》.
  237. 张麦仓,曹国鑫,董建新,郑磊,姚志浩(2013). 基于经典动态模型的GH4169合金钢锭中Laves相的回溶规律分析. 《金属学报》.
  238. 姚瑶,董建新,姚志浩,张麦仓,国为民(2013). DD407/FGH95合金热等静压扩散连接反应层元素互扩展规律 Ⅱ.模型验证及实验分析. 《金属学报》.
  239. 姚瑶,叶建水,董建新,姚志浩,张麦仓,国为民(2013). DD407/FGH95合金热等静压扩散连接反应层元素互扩展规律 Ⅰ.扩散连接模型的建立. 《金属学报》.
  240. 杨健,董建新,张麦仓,贾建,陶宇(2013). 新型镍基粉末高温合金FGH98的高温疲劳裂纹扩展行为研究. 《金属学报》.
  241. 彭以超,张麦仓,李伟,董建新,杜晨阳(2013). 过火处理对Q345R钢组织性能的影响. 《材料热处理学报》.
  242. 张丽娜,董建新,张麦仓,姚志浩(2013). 油井管用铁镍基耐蚀合金研究. 《世界钢铁》.
  243. 叶建水,董建新,张麦仓,姚志浩,郑磊(2013). 700℃先进超超临界电站用617和740镍基合金焊接研究进展. 《世界钢铁》.
  244. 孟凡国,董建新,张麦仓,郑磊,姚志浩(2013). 油井管用镍基耐蚀合金的两种冶炼工艺比较. 《世界钢铁》.
  245. 于秋颖,张麦仓,董建新(2013). 亚固溶温度热处理对GH720Li难变形高温合金γ′相的影响. 《工程科学学报》.
  246. 姚志浩,董建新,张麦仓,洪成淼(2013). 固溶及稳定化工艺对GH738合金碳化物和γ'相析出规律的影响. 《材料热处理学报》.
  247. 于秋颖,董建新,张麦仓(2013). GH710高温合金长期时效中的组织演变. 《材料热处理学报》.
  248. 姚志浩,董建新,陈旭,张麦仓,郑磊(2013). GH738高温合金长期时效过程中γ'相演变规律. 《材料热处理学报》.
  249. 石照夏,董建新,张麦仓,郑磊(2013). K418合金车用增压涡轮热裂倾向性分析及预测. 《中国有色金属学报》.
  250. 张麦仓,曹国鑫,董建新(2013). 冷却速度对GH4169合金凝固过程微观偏析及糊状区稳定性的影响. 《中国有色金属学报》.
  251. 韦家虎,董建新,付书红,姚志浩,张麦仓(2013). 形变参数对GH4169合金热变形行为的影响. 《材料热处理学报》.
  252. Dong Jianxin (2013). Effect of Nb Content on Micro-segregation Evolution of GH4169 Ingots. Rejiagong gongyi.
  253. Dong Jianxin (2013). Influence of heat treatments at temperatures below the γ′ solvus on γ′ phase in nickel-base superalloy GH720Li. Journal of University of Science and Technology Beijing.
  254. Maicang ZHANG, Guoxin Cao, Jianxin DONG, Lei Zheng, Zhihao Yao (2013). INVESTIGATIONS ON DISSOLUTION MECHANISM OF LAVES PHASE IN GH4169 ALLOY INGOT BASED ON CLASSICAL DYNAMICAL MODEL. Acta Metallurgica Sinica.DOI
  255. Jian Ying Yang, Jianxin DONG, Maicang Zhang, Jian Jia, Yu TAO (2013). HIGH TEMPERATURE FATIGUE CRACK GROWTH BEHAVIOR OF A NOVEL POWDER METALLURGY SUPERALLOY FGH98. Acta Metallurgica Sinica.DOI
  256. Yao Yao, Jianshui YE, Jianxin DONG, Zhihao Yao, Maicang ZHANG, Weimin Guo (2013). ELEMENTS DIFFUSION LAW OF DD407/FGH95 DIFFU-SIGN BONDING UNDER HOT ISOSTATIC PRESSINGI. Building Diffusion Bonding Model. Acta Metallurgica Sinica.DOI
  257. Yao Yao, Jianxin DONG, Zhihao Yao, Maicang ZHANG, Weimin Guo (2013). ELEMENTS DIFFUSION LAW OF DD40?/FGH95 DIFFU-SION BONDING UNDER HOT ISOSTATIC PRESSUREII. Model Verification and Experimental Analysis. Acta Metallurgica Sinica.DOI
  258. Xishan Xie, Chengyu Chi, Qiuying Yu, Zhihao Yao, M.X. Zhang, Yaohe Hu, Jianxin Dong, Hongyao Yu, Shuangqun Zhao, Fusheng Lin, Xia Liu, Lin-Bo Mei, Huachun Yang, Mingyang Li (2013). An Investigation on Structure Stability of Advanced Austenitic Heat-Resisting Steels and Ni-Base Superalloys for 600–700 °C A-USC Power Plant Application. Advances in materials technology for fossil power plants :.DOI
  259. L.N. Zhang, P. Wang, Jianxin Dong, M.C. Zhang (2013). Microstructures' effects on high temperature fatigue failure behavior of typical superalloys. Materials Science and Engineering A.DOI
  260. Zhaoxia Shi, Jianxin Dong, Maicang Zhang, Lei Zheng (2013). Solidification characteristics and segregation behavior of Ni-based superalloy K418 for auto turbocharger turbine. Journal of Alloys and Compounds.DOI
  261. Zhihao Yao, Maicang Zhang, Jianxin Dong (2013). Stress Rupture Fracture Model and Microstructure Evolution for Waspaloy. Metallurgical and Materials Transactions A.DOI
  262. Jue Wang, Jianxin Dong, Maicang Zhang, Xishan Xie (2013). Hot working characteristics of nickel-base superalloy 740H during compression. Materials Science and Engineering A.DOI
  263. 杨亮,董建新,张麦仓(2012). 690合金高温变形行为与动态再结晶模型. 《稀有金属材料与工程》.
  264. 杨亮,董建新,张麦仓(2012). 镍基690合金的动态再结晶行为研究. 《锻压技术》.
  265. 王珏,董建新,张麦仓,郑磊(2012). 镍基耐蚀合金G3后动态再结晶行为研究. 《锻压技术》.
  266. 陈昊,董建新,张麦仓(2012). 热处理工艺对铸造高温合金K480组织的影响. 《材料热处理学报》.
  267. 郭婧,耿志宇,董建新,张麦仓(2012). 镍基耐蚀825合金的组织特征及热力学计算. 《稀有金属材料与工程》.
  268. 石照夏,董建新,张麦仓(2012). 汽车增压器涡轮用铸造高温合金热裂研究进展. 《材料工程》.
  269. 石照夏,董建新,张麦仓(2012). K418合金显微组织及其增压器涡轮叶片热裂的研究. 《稀有金属材料与工程》.
  270. 郑磊,张麦仓,董建新(2012). 690合金平衡相析出规律的热力学数值模拟. 《稀有金属材料与工程》.
  271. 张丽娜,王璞,董建新,张麦仓,郑磊,张义文(2012). 长期时效对FGH97合金γ'相演化的影响. 《材料热处理学报》.
  272. 杨亮,董建新,张麦仓(2012). 晶粒度对690合金热变形特性的影响. 《稀有金属材料与工程》.
  273. 石照夏,董建新,张麦仓,郑磊(2012). K418合金车用增压涡轮熔模铸造过程数值模拟及热裂预测. 《铸造》.
  274. 孔胜国,王祯,韩伟,于望生,李俊涛,董建新(2012). K488合金大尺寸涡轮叶片精铸工艺研究. 《金属功能材料》.
  275. 石宇野,焦少阳,董建新,张麦仓(2012). 镍基高温合金γ′相析出的经典动态模型及应用. 《金属学报》.
  276. Dong Jianxin (2012). Study on Investment Casting of Large-size Turbine Blade of K488 Alloy. Metallic Functional Materials.
  277. Yuye SHI, Shaoyang JIAO, Jianxin DONG, Maicang ZHANG (2012). CLASSICAL PRECIPITATION DYNAMIC MODEL OF γ' PHASE OF NICKEL--BASED SUPER ALLOYS AND APPLICATIONS. Acta Metallurgica Sinica.DOI
  278. Zhongnan Bi, Jianxin Dong, Lei Zheng, Xishan Xie (2012). Phenomenon and Mechanism of High Temperature Low Plasticity in High-Cr Nickel-based Superalloy. Journal of Material Science and Technology.DOI
  279. Libo Wang, Long Liu, Jianxin Dong, X.S. Xie (2012). Effects of solidification rate on segregation and fluid flow tendency in mushy zone of directionally solidified superalloy Inconel 718. Materials Science and Technology.DOI
  280. Li Zheng, M C Zhang, Mohammed Reda Chellali, H. Bouchikhaoui, Jianxin Dong (2012). Oxidation property of powder metallurgy EP741NP Ni based superalloy at elevated temperatures. Materials Technology.DOI
  281. Chengyu Chi, Hongyao Yu, Jianxin Dong, Wenqing Liu, Shichang Cheng, Zhengdong Liu, Xishan Xie (2012). The precipitation strengthening behavior of Cu-rich phase in Nb contained advanced Fe–Cr–Ni type austenitic heat resistant steel for USC power plant application. Progress in Natural Science Materials International.DOI
  282. Liang Yang, Guanni Zhu, Jianxin Dong, Maicang Zhang (2012). Hot deformation characteristics and forging process of corrosion resistant nickel-base C-276 alloy. Procedia Engineering.DOI
  283. Liang Yang, Zhiyu Geng, Maicang Zhang, Jianxin Dong (2012). Study on hot deformation behavior and numerical simulation for hot extrusion process of corrosion resistant 825 alloy. Procedia Engineering.DOI
  284. Rong Zhang, Dongsheng Song, Tongxun Du, Jing Zhang, Jianxin Dong (2012). Effect of ageing heat treatment process on the microstructure and mechanical properties for high hardness 3J40 alloy. Procedia Engineering.DOI
  285. 焦少阳,朱冠妮,董建新,章清泉(2011). Hastelloy C-276中碳化物析出及晶界贫Mo规律研究. 《材料工程》.
  286. 姚志浩,董建新,张麦仓,于秋颖(2011). GH864合金870℃高温时效过程中强化相的退变. 《材料热处理学报》.
  287. 姚志浩,董建新,张麦仓,于秋颖,郑磊(2011). 固溶温度对GH864合金组织性能的影响. 《材料热处理学报》.
  288. 姚志浩,董建新,张麦仓(2011). GH738高温合金热变形过程显微组织控制与预测 Ⅰ.组织演化模型的构建. 《金属学报》.
  289. 葛婷婷,董建新,张麦仓,郑磊,高思文(2011). GH80A组织特征及平衡相析出行为的热力学计算分析. 《稀有金属材料与工程》.
  290. 赵双群,谢锡善,董建新(2011). 700℃超超临界燃煤电站用镍基高温合金Inconel740/740H的组织与性能. 《第九届电站金属材料学术年会》.
  291. 王璞,董建新,张麦仓,郑磊,谢锡善(2011). GH864合金蠕变/疲劳裂纹扩展速率及a-N曲线分析. 《稀有金属材料与工程》.
  292. 罗坤杰,张麦仓,王宝顺,董建新(2011). Hastelloy G-3合金热变形特性研究. 《稀有金属材料与工程》.
  293. 王晓辉,郑磊,张麦仓,董建新(2011). GH4133B合金组织特征及平衡相析出热力学研究. 《稀有金属材料与工程》.
  294. 王宝顺,董建新,张麦仓(2011). G3镍基合金热挤压模具型腔优化设计. 《稀有金属材料与工程》.
  295. 王珏,董建新,张麦仓,谢锡善(2011). 三种700℃以上超超临界电站用过热器管材. 《世界钢铁》.
  296. 郭婧,姚志浩,董建新,张麦仓(2011). 高温合金中晶粒异常长大及临界变形量研究进展. 《世界钢铁》.
  297. 程茜,董建新,张麦仓(2011). 三代粉末高温合金的特征及发展. 《世界钢铁》.
  298. 姚志浩,王秋雨,张麦仓,董建新(2011). GH738高温合金热变形过程显微组织控制与预测 Ⅱ.组织演化模型验证与应用. 《金属学报》.
  299. 王宝顺,林奔,张麦仓,董建新(2011). G3镍基耐蚀合金管材热挤压工艺润滑行为研究 Ⅰ.玻璃润滑膜厚度模型建立及应用. 《金属学报》.
  300. 林奔,王宝顺,张麦仓,董建新(2011). G3镍基耐蚀合金管材热挤压工艺润滑行为研究 Ⅱ.玻璃润滑剂黏度-成分计算方法及应用. 《金属学报》.
  301. 迟成宇,于鸿垚,董建新,陈梦谪,谢锡善(2011). 富铜纳米析出相在18Cr9Ni3CuNbN奥氏体耐热钢中的时效强化. 《材料热处理学报》.DOI
  302. 姚志浩,王秋雨,张麦仓,董建新(2011). GH864合金涡轮盘锻造过程中微观组织的数值模拟. 《锻压技术》.
  303. 杨亮,董建新,何智勇,张麦仓(2011). 690合金管冷轧及退火处理过程中的组织演变. 《材料热处理学报》.
  304. Dong Jianxin (2011). Selection of Superalloys for Superheater Tubes of Domestic 700 ℃ A-USC Boilers. Journal of Chinese Society of Power Engineering.
  305. Dong Jianxin (2011). Numerical simulation of microstructure evolution during GH864 alloy disc forging. Duanya jishu.
  306. Lei Zheng, Maicang Zhang, Mohammed Reda Chellali, Jianxin Dong (2011). Investigations on the growing, cracking and spalling of oxides scales of powder metallurgy Rene95 nickel-based superalloy. Applied Surface Science.DOI
  307. Chaoyang Sun, Jinrong Liu, Rui Li, Qingdong Zhang, Jianxin Dong (2011). Constitutive relationship of IN690 superalloy by using uniaxial compression tests. Rare Metals.DOI
  308. Lei Zheng, Maicang Zhang, Jianxin Dong, Meng Ye (2011). Relationship Between Grain Boundary Segregation of Antimony and Temper Embrittlement in Titanium-Doped Nickel-Chromium Steel. Journal of Iron and Steel Research International.DOI
  309. 林奔,王晓辉,郑磊,蒙肇斌,董建新,张麦仓(2010). 镍基高温合金GH4133B长期时效后组织演化分析. 《钢铁研究学报》.
  310. 洪成淼,董建新,张麦仓,郑磊(2010). 热变形参数对GH864合金显微组织的影响. 《稀有金属材料与工程》.
  311. 于秋颖,董建新,张麦仓,郑磊(2010). 难变形高温合金GH720Li平衡析出相的热力学计算. 《稀有金属材料与工程》.
  312. 迟成宇,董建新,刘文庆,谢锡善(2010). 3DAP研究Super304H耐热不锈钢中富Cu相的析出行为. 《金属学报》.
  313. 姚志浩,董建新,张麦仓,郑磊(2010). GH864合金显微组织与力学性能的关联性. 《稀有金属材料与工程》.
  314. 王璞,董建新,张义文,谢锡善(2010). 热处理对FGH96粉末高温合金裂纹扩展速率的影响. 《稀有金属材料与工程》.
  315. 毕中南,董建新,张麦仓,郑磊,章清泉(2010). Ni-Cr-Al合金中Cr、Al含量对热加工性的影响. 《稀有金属材料与工程》.
  316. 于鸿垚,董建新,谢锡善(2010). 18Cr10NiNb耐热钢析出相的热力学计算和平衡相分析. 《材料研究学报》.
  317. 谢锡善,董建新,付书红,张麦仓(2010). γ″和γ′相强化的Ni-Fe基高温合金GH4169的研究与发展. 《金属学报》.
  318. 于鸿垚,董建新,谢锡善(2010). 新型奥氏体耐热钢HR3C的研究进展. 《世界钢铁》.
  319. 王宝顺,林奔,罗坤杰,张麦仓,董建新(2010). 玻璃润滑剂在钢热挤压工艺中的应用. 《世界钢铁》.
  320. Lei Zheng, Zhang Maicang, Dong Jianxin (2010). Hot corrosion behavior of powder metallurgy Rene95 nickel-based superalloy in molten NaCl–Na2SO4 salts. Materials & Design (1980-2015).DOI
  321. Hongyao Yu, Dong Jianxin, Xie Ti-Shan (2010). Thermodynamic Calculation and Analysis on Precipitated Phases in 18Cr10NiNb Heat--resistant Steel. Cailiao yanjiu xuebao.
  322. Dong Jianxin (2010). Finite-element analyses of die wear during hot extrusion of Hastelloy G3 tubes. Journal of University of Science and Technology Beijing.
  323. Shuhong Fu, Jianxin Dong, Maicang Zhang, Ning Wang, Xishan Xie (2010). Research on Inconel 718 Type Alloys with Improvement of Temperature Capability.DOI
  324. Jinglong Qu, Minqing Wang, Jianxin Dong, Guilin Wu, Ji Zhang (2010). Effect of Compound Jacketing Rolling on Microstructure and Mechanical Properties of Superalloy GH4720Li.DOI
  325. Guosheng Chen, Wang Qingzeng, Fengjun Liu, Zixing Wang, Jianxin Dong, Xishan Xie (2010). Microstructure and Properties of Fine Grain IN718 Alloy Bar Products Produced by Continuous Rolling.DOI
  326. Maicang Zhang, Jianxin Dong, Zhongnan Bi, Qiuying Yu, Yuchun Zhang (2010). The Effect of Primary γ′ Distribution on Grain Growth Behavior of GH720Li Alloy.DOI
  327. Xishan Xie, Chengyu Chi, Hongyao Yu, Qiuying Yu, Jianxin Dong, Mengzhe Chen, Shuangqun Zhao (2010). Results from Structural Stability Studies of Advanced Heat-Resistant Steels and Alloys for Fossil Power Plants in China. Advances in materials technology for fossil power plants :.DOI
  328. Ling Wang, Yijun Yao, Jianxin Dong, Maicang Zhang (2010). EFFECT OF COOLING RATES ON SEGREGATION AND DENSITY VARIATION IN THE MUSHY ZONE DURING SOLIDIFICATION OF SUPERALLOY INCONEL 718. Chemical Engineering Communications.DOI
  329. Ling Wang, Lin Liu, Hongyan Wu, Jianxin Dong, Maicang Zhang (2010). EFFECTS OF SUPERHEAT ON THE MICROSEGREGATION AND FLUID FLOW TENDENCY DURING DIRECTIONAL SOLIDIFICATION OF SUPERALLOY In718. Chemical Engineering Communications.DOI
  330. Ling Wang, Yijun Yao, Bin Liu, Bo-ying Zhong, Jianxin Dong (2010). Effect of cooling rate on the phase transformation and stability of the mushy zone during the solidification of Waspaloy. International Journal of Minerals Metallurgy and Materials.DOI
  331. Lei Zheng, Maicang Zhang, Jianxin Dong (2010). Oxidation behavior and mechanism of powder metallurgy Rene95 nickel based superalloy between 800 and 1000°C. Applied Surface Science.DOI
  332. Zhongnan Bi, Jianxin Dong, Maicang Zhang, Lei Zheng, Xishan Xie (2010). Mechanism of α-Cr precipitation and crystallographic relationships between α-Cr and δ phases in Inconel 718 alloy after long-time thermal exposure. International Journal of Minerals Metallurgy and Materials.DOI
  333. Zhongnan Bi, Maicang Zhang, Jianxin Dong, Kunjie Luo, Jue Wang (2010). A new prediction model of steady state stress based on the influence of the chemical composition for nickel-base superalloys. Materials Science and Engineering A.DOI
  334. 洪成淼,董建新,张玉峰,张麦仓,郑磊(2009). GH864合金热加工过程中组织特征研究. 《稀有金属材料与工程》.
  335. 韩寿波,张义文,迟悦,贾建,董建新(2009). C和Hf对FGH97粉末冶金高温合金热力学平衡相析出的影响. 《粉末冶金工业》.
  336. 吕家欣,郑磊,张麦仓,董建新(2009). 镍基合金FGH95在熔融NaCl-Na2SO4中的腐蚀行为. 《金属学报》.
  337. 焦少阳,董建新,张麦仓,谢锡善(2009). 耐蚀合金/碳钢热等静压扩散焊接反应层元素互扩散规律研究. 《材料工程》.
  338. 熊继春,李嘉荣,赵金乾,刘世忠,董建新(2009). 单晶高温合金DD6再结晶晶界析出相特征及其形成机制. 《金属学报》.
  339. 王宝顺,董建新,张麦仓,郑磊(2009). Pro/E曲面建模在ProCAST网格划分中的应用. 《铸造技术》.
  340. 谢锡善,董建新,胡尧和,张麦仓,郑磊(2009). 铁镍基高温耐蚀合金的研究与发展. 《世界钢铁》.
  341. 王宝顺,罗坤杰,张麦仓,董建新(2009). 油井管用镍基耐蚀合金的研究与发展. 《世界钢铁》.
  342. 焦少阳,董建新,张麦仓,郑磊(2009). 双金属热轧复合的界面结合影响因素及结合机理. 《材料导报》.
  343. S.Y. Jiao, M.C. Zhang, Lei Zheng, Jianxin Dong (2009). Investigation of Carbide Precipitation Process and Chromium Depletion during Thermal Treatment of Alloy 690. Metallurgical and Materials Transactions A.DOI
  344. Ling Wang, Chuanqi Li, Jianxin Dong, Maicang Zhang (2009). AN INVESTIGATION OF MICROSEGREGATION AND LIQUID DENSITY REDISTRIBUTION DURING SOLIDIFICATION OF INCONEL 718. Chemical Engineering Communications.DOI
  345. Dong Jianxin (2009). Research and Development of Nickel-based Corrosion Resistant Alloy for Oil Country Tubular Goods. World Iron & Steel.
  346. Dong Jianxin (2009). EFFECT OF C AND Hf ON THERMODYNAMIC EQUILIBRIUM PHASE PRECIPITATION IN FGH97 PM SUPERALLOY. Powder Metallurgy Industry.
  347. Dong Jianxin (2009). CORROSION BEHAVIOR OF NICKEL BASE ALLOY FGH95 IN MOLTEN NaCl-Na_2SO_4. Acta Metallurgica Sinica.
  348. 韩积亭,姜明智,张麦仓,董建新,张继(2008). Ti/Al摩尔比对铸造TiAl合金组织及力学性能的影响. 《特种铸造及有色合金》.
  349. 田玉亮,董建新,许根国,杨晓剑,任先京(2008). 氦冷Φ660 mm铸锭偏析及均匀化工艺模拟. 《金属材料与冶金——第九届北京冶金青年优秀科技论文集》.
  350. Ling Wang, Jianxin Dong, Yuliang Tian, Lei Zhang (2008). Microsegregation and Rayleigh number variation during the solidification of superalloy Inconel 718. International Journal of Minerals Metallurgy and Materials.DOI
  351. Shuhong Fu, Jianxin Dong, M.C. Zhang, Xiaodong Xie (2008). Alloy design and development of INCONEL718 type alloy. Materials Science and Engineering A.DOI
  352. 洪成淼,董建新,张麦仓,张立红,张玉峰,李克雄(2007). GH4738合金烟气轮机涡轮盘组织和力学性能研究. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  353. 赵双群,董建新,谢锡善(2007). 700℃蒸汽参数超超临界锅炉过热器管材用高温合金. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  354. 胡尧和,董建新,谢锡善,任福全,傅祖明(2007). 真空镍铌合金在铸造高温合金中应用的研究. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  355. 王玲,董建新,郭磊,仲博颖,田玉亮(2007). 几种高温合金铸锭中偏析和均匀化研究. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  356. 郑磊,张麦仓,董建新,胡尧和(2007). GH3690合金晶界反应及模拟运行后的组织演化. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  357. 张麦仓,董建新,郑磊(2007). GH4169合金φ660mm钢锭快锻开坯工艺过程数值分析. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  358. 付书红,董建新,张麦仓,谢锡善(2007). 改型GH4169合金的研究. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  359. 毕中南,董建新,张麦仓(2007). Ni-Cr基高温合金中α-Cr相演变及稳定化处理. 《动力与能源用高温结构材料——第十一届中国高温合金年会论文集》.
  360. 王玲,董建新,张麦仓,郑磊(2007). 两种Ni-Cr-Co基高温合金的凝固偏析及其对Rayleigh数的影响. 《铸造技术》.
  361. 宫磊,付书红,董建新,张麦仓,谢锡善(2007). 新型718合金的元素强化作用及组织稳定性研究. 《稀有金属材料与工程》.
  362. 郑磊,徐庭栋,邓群,司红,董建新(2007). 高温合金GH4169(Inconel 718)中磷晶界偏聚特性的实验研究. 《金属学报》.
  363. 郭磊,王玲,董建新,张麦仓,郑磊(2007). GH742合金等温凝固过程中偏析规律的研究. 《稀有金属材料与工程》.
  364. 王玲,仲博颖,董建新,张麦仓(2007). Waspaloy合金凝固过程中偏析和液体密度的变化. 《稀有金属材料与工程》.
  365. 韦家虎,张麦仓,董建新(2007). GH4738合金涡轮盘剩余寿命预测. 《动力与能源用高温结构材料——第十一届中国高温合金年会》.
  366. 王玲,董建新,杨春军,谢锡善(2007). 宏观偏析黑斑形成机理及其判据. 《铸造技术》.
  367. Xishan Xie, Shuangqun Zhao, Jianxin Dong, Gaylord D. Smith, Brian Baker, S. L. Patel (2007). A New Improvement of Inconel Alloy 740 for USC Power Plants. Advances in materials technology for fossil power plants :.DOI
  368. Lei Zheng, Tingdong Xu, Qun Deng, Jianxin Dong (2007). Experimental study on the characteristic of grain-boundary segregation of phosphorus in Ni-base superalloy. Materials Letters.DOI
  369. 王玲,董建新,田玉亮,谢锡善(2006). GH3044合金宏观偏析行为及凝固过程中元素偏析规律研究. 《稀有金属材料与工程》.
  370. 田玉亮,王玲,董建新,张麦仓,曾燕屏(2006). 均匀化处理过程中Waspaloy合金铸锭中元素分配规律的研究. 《稀有金属材料与工程》.
  371. 董建新,张麦仓,曾燕屏(2006). Inconel706合金宏观偏析“黑斑”的形成特征及组织行为. 《稀有金属材料与工程》.
  372. 王玲,董建新(2006). 宏观偏析“黑斑”形成的Rayleigh判据及应用. 《兵器材料科学与工程》.
  373. 韦家虎,董建新,张麦仓,曾燕屏,赵京晨(2006). 细晶铸造K4169合金微观组织对力学性能的影响. 《兵器材料科学与工程》.
  374. 朱磊,张麦仓,董建新,庞克昌(2006). TC11合金本构关系的建立及其在盘件等温锻造工艺设计中的应用. 《稀有金属材料与工程》.
  375. 田玉亮,王玲,董建新,张麦仓(2006). GH742铸锭偏析及均匀化过程中元素分布规律. 《稀有金属材料与工程》.
  376. 孙影,张麦仓,董建新,杨忠民(2006). Q235钢的热变形特性. 《钢铁研究学报》.
  377. 宛农,周悠,董建新,郑晓,谢锡善(2006). 经济型大截面空淬铸钢的成分设计与试验验证. 《铸造技术》.
  378. 赵双群,董建新,张麦仓,谢锡善(2005). 新型镍基高温合金在950℃和1000℃的氧化行为. 《稀有金属材料与工程》.
  379. 董建新,谢锡善(2005). 不同Cr含量高温合金中α-Cr相析出行为及作用. 《金属学报》.
  380. 宛农,董建新,谢锡善(2005). AlSi7 Mg系铝合金组织的热力学分析. 《特种铸造及有色合金》.
  381. 国为民,董建新,吴剑涛,张凤戈,陈淦生,陈生大(2005). FGH96镍基粉末高温合金的组织和性能. 《钢铁研究学报》.
  382. 董建新,张麦仓,曾燕屏(2005). 新型Ni-Cr基GH648合金成分对热力学平衡相析出行为的影响. 《稀有金属材料与工程》.
  383. 宛农,董建新,谢锡善(2005). 15Cr系高铬铸铁组织特征的热力学分析. 《铸造》.
  384. 董建新,张麦仓,曾燕屏(2005). "黑斑"形成机理及判据. 《兵器材料科学与工程》.
  385. Xiaoyu Xie, Ge Wang, Jianxin Dong, Cheng Xu, Wenfang Cao, R.L. Kennedy (2005). Structure Stability Study on a Newly Developed Nickel-Base Superalloy - Allvac 718Plus. International Symposium on Superalloys 718, 625, 706 and Various Derivatives.DOI
  386. 宛农,谢锡善,徐志超,董建新(2004). 金属材料高温持久强度的预测模型. 《理化检验-物理分册》.
  387. 高惠菊,刘攀,艾家和,董建新,谢锡善,沈永香,甄玉(2004). 新一代高性能合金弹簧钢的开发与应用. 《钢铁》.
  388. 董建新,张麦仓,谢锡善(2004). 镍基IN718合金时效过程中α-Cr相演变行为. 《稀有金属材料与工程》.
  389. 赵双群,张麦仓,董建新,谢锡善(2003). 新型高温合金700℃时效组织及力学性能. 《稀有金属材料与工程》.
  390. 郑传林,徐重,谢锡善,贺志勇,董建新,张麦仓(2003). NiCrMoNb合金化层对TiAl金属间化合物抗氧化性能的影响. 《稀有金属材料与工程》.
  391. 赵双群,董建新,谢锡善(2003). Ni-Cr-Co基高温合金704℃和760℃时效组织稳定性. 《中国有色金属学报》.
  392. Wang Gailian, Wu Cuiwei, Zhang Maicang, Dong Jianxin, Xie Xishan, John F. Radavich, Bruce A. Lindsley, Gangshu Shen (2003). The microstructural changes and their effect on CCGR after long time thermal exposure in DA718 and STD718. Materials Science and Engineering A.DOI
  393. 王改莲,吴翠微,张麦仓,董建新,谢锡善(2002). α-Cr在Incone1718合金中析出行为的微观分析. 《稀有金属材料与工程》.
  394. 张麦仓,董建新,曾燕屏,谢锡善,罗子健(2002). PM René 95合金涡轮盘等温锻造工艺的模拟式设计. 《金属学报》.
  395. 谢锡善,张丽娜,张麦仓,董建新(2002). 镍基粉末高温合金中夹杂物的微观力学行为研究. 《金属学报》.
  396. 刘仲青,董建新,张麦仓,赵双群,谢锡善,Gaylord,D.Smith(2002). 高强耐蚀Ni-Co-Cr高温合金的组织稳定性. 《金属学报》.
  397. 周建波,董建新,徐志超,谢锡善(2002). 热处理工艺对FGH95合金涡轮盘组织和性能的影响. 《金属热处理》.
  398. 徐江,董建新,谢锡善,徐重(2002). 双层辉光离子多元共渗中的源极变化. 《中国有色金属学报》.
  399. 曾燕屏,张麦仓,董建新,谢锡善(2002). 宝钢SPHC出口钢卷“腰折”的消除. 《钢铁》.
  400. 赵同春,张麦仓,董建新,艾家和,谢锡善(2002). 60Si2MnA弹簧钢的热变形行为. 《钢铁研究学报》.
  401. Jianxin Dong, Maicang Zhang, Xishan Xie, Raymond G. Thompson (2002). Interfacial segregation and cosegregation behaviour in a nickel-base alloy 718. Materials Science and Engineering A.DOI
  402. Dong Jianxin (2002). MICRO-MECHANICAL BEHAVIOR STUDY OF NON-METALLIC INCLUSIONS IN NICKEL-BASE P/M SUPERALLOY. Acta Metallurgica Sinica.
  403. 艾家和,董建新,胡尧和,谢锡善(2001). 4Cr13线材轧制后冷却速率对表面宏观应力和微观组织影响的研究. 《兵器材料科学与工程》.
  404. 艾家和,曾凡,张江海,董建新,胡尧和,谢锡善(2001). 304Hc-2不锈钢开坯轧制时表面开裂的研究. 《热加工工艺》.
  405. 吴翠微,董建新,张麦仓,王改莲,谢锡善(2001). α-Cr相在IN718合金中的析出及其热力学计算. 《金属学报》.
  406. 李晓,董建新,张丽娜,张麦仓,胡尧和,谢锡善,国为民(2001). 疲劳保载时间与固溶处理对PM René95合金高温裂纹扩展速率的影响. 《金属学报》.
  407. 张旭,谢锡善,董建新,徐重,张通和(2001). Ni-Cr-Mo-Nb合金的阴极溅射行为. 《中国有色金属学报》.
  408. 王改莲,吴翠微,董建新,谢锡善(2001). Inconel718合金中的α-Cr析出相. 《兵器材料科学与工程》.
  409. 张丽娜,张麦仓,李晓,董建新,谢锡善(2001). Ni基P/M Rene 95合金中非金属夹杂物导致裂纹萌生和扩展的扫描电镜原位观察. 《稀有金属材料与工程》.
  410. 艾家和,董建新,张江海,谢锡善(2001). 4Cr9Si2阀门钢丝冷拔过程中脆断的失效分析. 《兵器材料科学与工程》.
  411. 毛征东,谢锡善,董建新,林清英(2001). Pb在GH871合金晶界的偏聚. 《特殊钢》.
  412. Jianxin Dong, Kota Sawada, Kenji Yokokawa, Fujio Abe (2001). Internal nitridation behavior during long-term creep in a nickel-base superalloy. Scripta Materialia.DOI
  413. Xingbo Liu, Jianxin Dong, Xishan Xie, Keh‐Minn Chang (2001). The appearance of magnesium and its effect on the mechanical properties of Inconel 718 with low sulfur content. Materials Science and Engineering A.DOI
  414. Xingfei Xie, Guan Wang, Jianxin Dong, Chengyi Wu, John F. Radavich, G. Shen, Bruce A. Lindsley (2001). Alpha Chromium Formation in Alloy 718 and its Effect on Creep Crack Propagation. International Symposium on Superalloys 718, 625, 706 and Various Derivatives.DOI
  415. Xishan Xie, Lina Zhang, Jianxin Dong, Xiao Li (2001). Inclusion Effect on Crack Propagation and Fracture Behavior of P/M Nickel-Base superalloy. Proceedings of the Asian Pacific Conference on Fracture and Strength and International Conference on Advanced Technology in Experimental Mechanics.DOI
  416. Jianxin Dong, Xiaodong Xie, Raymond G. Thompson (2000). The influence of sulfur on stress-rupture fracture in inconel 718 superalloys. Metallurgical and Materials Transactions A.DOI
  417. Sarwan Mannan, Shailesh Patel, Jianxin Dong, Xishan Xie (2000). Crack Growth and High Temperature Thermal Stability of INCONEL Alloy 725.DOI
  418. 刘雅晶,李玉清,谢锡善,J.H.Tundermann,董建新,郭晓倬(1999). Al,Ti和Nb对Fe-Ni-Cr-Co-Nb—Ti-Al合金铸态组织的影响. 《金属学报》.
  419. 刘雅晶,李玉清,谢锡善,胡尧和,董建新,JohnH.Tundermann(1999). Ni-Cr-Mo-Fe-W合金中宏观“黑斑”缺陷特征的形成. 《材料科学与工艺》.
  420. X Liu, Hong Bo Liu, Jianxin Dong, Xingfei Xie (1999). Molecular dynamics simulation on phosphorus behavior at Ni grain boundary. Scripta Materialia.DOI
  421. Xingbo Liu, Jianxin Dong, Bin Tang, Yaohe Hu, Xishan Xie (1999). Investigation of the abnormal effects of phosphorus on mechanical properties of INCONEL718 superalloy. Materials Science and Engineering A.DOI
  422. 唐宾,董建新,胡尧和,李咏梅(1998). 低磷GH169和常规GH169合金力学性能的对比研究. 《材料科学与工艺》.
  423. 李成明,田林海,徐重,谢锡善,董建新(1998). 双层辉光离子渗金属中W-Mo合金供给源的研究. 《材料科学与工艺》.
  424. 唐宾,董建新,胡尧和,谢锡善(1998). 磷对Inconel 718形变合金力学性能的影响. 《中国有色金属学报》.
  425. 唐宾,刘兴博,董建新,胡尧和,谢锡善(1997). 磷对 GH 169 合金静态力学性能影响的研究. 《兵器材料科学与工程》.
  426. 谢锡善,董建新,陈卫,梁强,徐志超,倪克诠,陈梦谪(1997). γ″和γ′复合析出强化新型镍基高温合金的研究. 《材料热处理学报》.DOI
  427. 董建新(1996). INCONEL718高温合金的发展. 《兵器材料科学与工程》.
  428. 董建新(1996). 增压器叶片K17合金失效分析. 《兵器材料科学与工程》.
  429. Dong Jianxin, Xie Xishan, Zhang Shouhua (1995). Coarsening behavior of γ″ precipitates in modified inconel 718 superalloy. Scripta Metallurgica et Materialia.DOI
  430. X. Xie, Q. Liang, Jianxin Dong, W. Meng, Z. Xu, M. Chen, F. Wang, Yancheng Cai, Jingfeng Zhang, N. Wang, Éric Andrieu, A. Pineau (1994). Investigation on High Thermal Stability and Creep Resistant Modified Inconel 718 with Combined Precipitation of γ" and γ'. International Symposium on Superalloys 718, 625, 706 and Various Derivatives.DOI
  431. Jianxin Dong, Xingfei Xie, Z. Xu, S. Zhang, M. Chen (1994). Tem Study on Microstructure Behavior of Alloy 718 After Long Time Exposure at High Temperatures. International Symposium on Superalloys 718, 625, 706 and Various Derivatives.DOI
  432. Shouhua Zhang, Xishan Xie, Dong Jianxin, Chen Mengzhe (1994). The development of new modification of Inconel 718.
  433. 董建新,谢蔚,徐志超,谢锡善,章守华(1993). Mg及δ相对GH169高温合金力学性能的影响. 《金属学报》.
  434. 董建新,谢锡善,章守华(1993). INCONEL718型合金中γ″和γ′的复合及单独析出对组织稳定性的影响. 《金属学报》.
  435. 董建新,谢锡善,王宓(1993). GH169高温合金主要相分析. 《兵器材料科学与工程》.
  436. 董建新,梁强,孟维钢,谢锡善(1991). Inconel718合金组织的电镜观察. 《兵器材料科学与工程》.
  437. 董建新,陈复民,陈金铭,刘文西(1990). Cu-Zn-Al合金逆形状记忆组织的电镜观察. 《金属学报》.
  438. 第一性原理研究 Sc,Yuan-Su-Can-Za-Zai Ni,Ni.,Al 合金低指数相界的强化作用 贾亚鹏,Ya-Peng Jia,Junjun Cai,Jiang He,Jianxin Dong. First Principles Study on the Strengthening Effect of Sc Element Doping on the Low Index Phase Boundary of Ni/Ni 3 Al Alloy.

预印本

  1. Jixuan Duan Duan, Teng An, Yu Gu, Zhongnan Bi, Jinhui Du, Jianxin Dong (2026). Creep Environmental Switching Drives Microstructural Reconfiguration toward Enhanced Creep Resistance in a Ni-Co Based Superalloy. SSRN Electronic Journal.DOI
  2. Jixuan Duan Duan, Teng An, Yu Gu (162342), Zhongnan Bi, Jinhui Du, Jianxin Dong (2026). Achieving synergetic optimization of tensile strength and creep resistance in a novel Ni-Co based superalloy through a multi-scale design window. SSRN Electronic Journal.DOI
  3. Jixuan Duan Duan, Teng An, Yu Gu, Fangzhen Duan, Jinhui Du, Zhongnan Bi, Jianxin Dong (2026). Pre-formed short stacking faults in secondary γ′ precipitates origin stability and contribution to tensile strengthening in the Ni-Co based superalloy. SSRN Electronic Journal.DOI
  4. Jixuan Duan, Teng An, Yu Gu, Zhongnan Bi, Jinhui Du, Jianxin Dong (2025). Converting creep damage in Ni-Co based superalloys into a strengthening mechanism through creep environment switching. SSRN Electronic Journal.DOI

书籍章节

  1. He Jiang, Jing Yang, Jianxin Dong, Maicang Zhang, Zhihao Yao, Xishan Xie (2018). Stress Relaxation Behavior Comparison of Typical Nickel-Base Superalloys for Fasteners. ˜The œminerals, metals & materials series.DOI
  2. Minqing Wang, Jinhui Du, Qun Deng, Xudong Lv, Chengbin Yang, Jianxin Dong (2018). The Effect of Grain Size on the Dwell Fatigue Crack Growth Rate of Alloy ATI 718Plus®. ˜The œminerals, metals & materials series.DOI
  3. Jiayu Chen, Jianxin Dong (2017). The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI. ˜The œminerals, metals & materials series.DOI

此主页由公开资料整理,尚未经学者本人认领。