徐久军｜大连海事大学｜学者主页

2026

Influence of wetting pinning on lubrication performance of bionic fluted structural surface under oil rich condition

Mengwen Hou, Lianglong Zou, Yuanyuan Jiang, Wenbin Chen, Zhijun Yan, Mei-Hua Jin, Jiujun Xu

Tribology International

DOI

2026

Lubrication Performance of Gas–Liquid Two-Phase through Low-Surface-Energy Textures with Bubble Inducing and Stabilizing

Lixia Xue, Yuanyuan Jiang, Jiujun Xu, Zhijun Yan, Y. R. Shen

Tribology Letters

DOI

2026

Impact of Different Solid Lubricant-Filled Micro-textures on Anti-wear Performance for Chrome-Plated Liners

Leize Li, Yan Ni Shen, Zukai Zhao, Jie Liu, Junjing Fan, Jiujun Xu, Tongshan Zhang

Journal of Materials Engineering and Performance

DOI

2025

表面织构分布模式对滑动摩擦副流体润滑性能的影响

孙浩程，严志军，徐久军，刘泽，吴世博，孙涛

《中国表面工程》

2025

基于超声波的涂层活塞环油膜厚度仿真

罗佳美，韩晓光，单英春，王静思，徐久军

《内燃机学报》

DOI

2025

Introducing PES porous membrane to establish bionic autocrine channels: A lubricating, anti-wear antifouling coating.

Rui Zhao, Jine Wang, Zhe Cheng, Lianglong Zou, Mei-Hua Jin, Jiujun Xu

Marine Pollution Bulletin

DOI

2025

Tribofilm Enhancement of Aminoguanidine Ionic Liquid With ZDDP/MoDTC for Heavy-Duty Interface

Junjing Fan, Yan Shen, Xiaoshuai Yuan, Jinghao Qu, Jie Liu, Baihong Yu, Jiujun Xu, Tongshan Zhang

Journal of Tribology

DOI

2025

The effect of electrodeposition combined with surface texturing on the tribology performance of cylinder liner

Xiaoguang Han, Di Zhang, Zhi Li, Yingchun Shan, Jingsi Wang, Jiujun Xu

Surface Topography Metrology and Properties

DOI

2025

Ultra-low friction with SiO2 nanoparticles bonded sorbitan monostearate oleogel as green lubricant additives

Baihong Yu, Yan Shen, Leize Li, Junjing Fan, Jinghao Qu, Jiujun Xu

Tribology International

DOI

2025

Improved Friction and Wear Performance Utilized with Aminoguanidine-Based Ionic Liquid Over Wide Temperature Range for Reciprocating Frictional Contact Surface

Junjing Fan, Yan Ni Shen, Ye Liu, Jinghao Qu, Jie Liu, Baihong Yu, Jiujun Xu

Tribology Letters

DOI

2025

Wear Reliability Assessment of Piston Ring and Cylinder Liner Components Based on Probability Mapping

Peijian Guo, Jiujun Xu, Zhijun Yan, Ruoxuan Huang

Journal of Tribology

DOI

2025

Effects of ionic liquid and MoDTC additives on the anti-wear performance of soot-containing lubricants for tribopair interface

Junjing Fan, Yan Ni Shen, Hui Qiang, Qihang Cui, Baihong Yu, Jiujun Xu, Tongshan Zhang

Surface Topography Metrology and Properties

DOI

2025

Friction characteristics of rapid spreading surface with annular microtexture at reciprocating contact interface

Jie Liu, Yan Ni Shen, Qingyi Ma, Jin Mei-hua, Zhixiang Liu, Leize Li, Jiujun Xu, Chengdi Li

Applied Surface Science

DOI

2024

Lubrication performance of 5CB liquid crystal combined with different wear-resistant coatings on friction surface

Qihang Cui, Jingsi Wang, Jingsi Wang, Jiayuan Wang, Jiayuan Wang, Chengdi Li, Yan Ni Shen, Pay Jun Liew, Jiujun Xu

Tribology International

DOI

2024

Effects of double-sided textures matching on friction and wear performance in reciprocating contact interface

Zhixiang Liu, Yan Ni Shen, Jie Liu, Jinghao Qu, Jiujun Xu, Chengdi Li

Wear

DOI

2024

Preparation and tribological properties of the friction induced Mo-based film

Zichun Wang, Ruoxuan Huang, Zhiqiang Zhao, Qiang Hui, Jingsi Wang, K.E. Grinkevych, Jiujun Xu

Tribology International

DOI

2024

Low and high temperature effects on friction and wear performance of Cr-plated cylinder liner

Zukai Zhao, Yan Ni Shen, Ye Liu, Chuanfei Xing, Jie Liu, Junjing Fan, Jiujun Xu

Wear

DOI

2024

A new efficient flow continuity lubrication model for the cylinder liner‐piston ring based on the locally oriented roughness

Wen‐Bin Chen, Deliang Liu, Jiujun Xu

Lubrication Science

DOI

2024

Tribological performance of lubricant with high concentration graphene additive dispersed by ultrasonic technology

Zichun Wang, Jingsi Wang, Jingsi Wang, Ruoxuan Huang, Jiayuan Wang, Jiayuan Wang, Boshen Zhang, K.E. Grinkevych, Jiujun Xu

Tribology International

DOI

2024

The effect of MoS2 concentration on the thickness and tribology performance of electro-codeposited Ni–Cr–MoS2 coatings

Zhi Li, Xiaoguang Han, Yingchun Shan, Yan Ni Shen, Jiujun Xu

Wear

DOI

2024

Tribological Properties of Nano-Scale Al2O3 Particles with Different Shapes as Lubricating Oil Additives

Zichun Wang, Jingsi Wang, Jingsi Wang, Jiayuan Wang, Jiayuan Wang, Heyuan Tian, Boshen Zhang, K.E. Grinkevych, Jiujun Xu

Journal of Marine Science and Engineering

DOI

2024

Wear life prediction of piston ring and cylinder liner based on integration of experiment and bench test data

Peijian Guo, Zhijun Yan, Jiujun Xu, Yan Ni Shen, Jingsi Wang

Engineering Failure Analysis

DOI

2023

Earthworm Skin Inspired Rapid Secretion of Continuous Liquid Slippery Film via Nanochannels

Jia-Hui Yu, Rui Zhao, Jine Wang, Nü Wang, Jiujun Xu, Mei-Hua Jin, Yong Zhao

Tribology International

DOI

2023

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Yan Ni Shen, Qi Li, Zhixiang Liu, Bin Ye, Junjing Fan, Jiujun Xu

Wear

DOI

2022

电解微织构对镀铬气缸套摩擦磨损性能的影响

邢传斐，沈岩，袁晓帅，刘志翔，范君静，徐久军

《中国表面工程》

2022

Effect of Laser Surface Texturing on the Tribological Properties and Scuffing Mechanism of CKS Piston Ring Against Cast Iron Cylinder Liner Under High Intensifying

Xiaoguang Han, Guangchong Chen, Dong He, Yingchun Shan, Jiujun Xu

Tribology Transactions

DOI

2022

Characterization and tribology performance of polyaniline-coated nanodiamond lubricant additives

Ruoxuan Huang, Shinan Han, Tianchi Zhang, Zichun Wang, K.E. Grinkevych, Xiangnan Chen, Jiujun Xu

Nanotechnology Reviews

DOI

2021

CKS活塞环表面微织构几何形貌及排布方式对摩擦学性能的影响

赫冬，韩晓光，陈广聪，汪哲宇，陈文滨，徐久军

《中国表面工程》

2021

液相等离子制备石墨烯润滑添加剂的摩擦磨损特性

马青怡，沈岩，袁晓帅，刘志翔，邢传斐，徐久军

《车用发动机》

2021

基于双点接触电阻法的润滑状态研究

郭晨，严志军，邹玉堂，徐久军

《润滑与密封》

2021

激光表面织构微坑形貌及面积占有率对氮化气缸套摩擦学性能的影响

徐阳阳，韩晓光，徐久军，单英春，陈玉珍，黄若轩

《中国表面工程》

2021

Enhancement of heavy-duty friction and wear characteristics of cast-iron surface by electrolytic micro-textures filled with MoS2

Yan Ni Shen, Bin Ye, Baihong Yu, Zhixiang Liu, Ruoxuan Huang, Jiujun Xu

Surface and Coatings Technology

DOI

2021

Tribological performance and scuffing behaviors of several automobile piston rings mating with chrome-plated cylinder liner

Zeyu Ma, Ruoxuan Huang, Xiaoshuai Yuan, Yan Ni Shen, Jiujun Xu

Friction

DOI

2021

Cyclic Indentation Method Applied to Evaluating Surface Degradation of Cylinder-Piston Group Parts

Jiayan Wang, H. Li, K.E. Grinkevych, Ruoxuan Huang, Jiujun Xu, G. V. Tsyban’ov, I. Tkachenko

Strength of Materials

DOI

2020

激光参数对硼磷合金铸铁缸套微坑形貌影响研究

郎平，徐阳阳，袁晓帅，徐久军，单英春，韩晓光

《应用激光》

DOI

2020

典型激光参数对高硅铝合金缸套表面微坑几何形貌影响

吕佳霏，韩晓光，赫冬，杜凤鸣，陈玉珍，徐久军

《激光与光电子学进展》

2020

基于电阻法的双点接触摩擦试验装置

刘德良，郭晨，刘真，严志军，徐久军

《大连海事大学学报》

DOI

2020

The influence of protruding silicon particle shape on the friction performance of Al–Si alloy

Chengdi Li, Xiao Chen, Fengming Du, Yan Ni Shen, Jiujun Xu

Surface Topography Metrology and Properties

DOI

2020

Effects of molecular structures of poly α-olefin mixture on nano-scale thin film lubrication

Weiwei Wang, Xiao Zhang, Yang Li, Ruoxuan Huang, Jiujun Xu, Lin Yang

Materials Today Communications

DOI

2020

Friction and wear behavior of Al–Si alloy cylinder liner prepared by surface shaping treatments

Chengdi Li, Xiao Chen, Xiaowei Zhang, Shunjian Xu, Yao Bo Hu, Huihua Jian, Jiujun Xu

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2020

Tribological performance of nano-diamond composites-dispersed lubricants on commercial cylinder liner mating with CrN piston ring

Ruoxuan Huang, Zichun Wang, Xiaoshuai Yuan, Tianchi Zhang, Siqi Ma, Xiangnan Chen, Jiujun Xu

Nanotechnology Reviews

DOI

2019

珩磨角和粗糙度对CuNiCr气缸套摩擦学性能的影响

陈文滨，马思齐，王正，徐久军

《车用发动机》

2019

轴向分区冷却方式对气缸套-活塞环摩擦功耗影响的仿真研究

陈文滨，王子淳，徐久军

《大连海事大学学报》

DOI

2019

Anti-Wear Property of Aluminum–Silicon Alloy Treated by Chemical Etching, Mechanical Honing and Laser Finishing

Fengming Du, Chengdi Li, Zetian Mi, Yan Ni Shen, Ruoxuan Huang, Xiaoguang Han, Yong Dong, Jiujun Xu

Materials

DOI

2019

Wear Evolution of the Glass Fiber-Reinforced PTFE under Dry Sliding and Elevated Temperature

Ruoxuan Huang, Siqi Ma, Meidi Zhang, Jie Yang, Dehong Wang, Liang Zhang, Jiujun Xu

Materials

DOI

2019

The Effect of Honing Angle and Roughness Height on the Tribological Performance of CuNiCr Iron Liner

Siqi Ma, Yuchen Liu, Zichun Wang, Zheng Wang, Ruoxuan Huang, Jiujun Xu

Metals

DOI

2019

Friction Performance of Aluminum-Silicon Alloy Cylinder Liner after Chemical Etching and Laser Finishing

Fengming Du, Chengdi Li, Zetian Mi, Ruoxuan Huang, Xiaoguang Han, Yan Ni Shen, Jiujun Xu

Metals

DOI

2019

On the Adhesive Strength Quantification and Tribological Performance of the Multilayered Fe–Ni Coating Fabricated by Electroplating

Ruoxuan Huang, Zeyu Ma, W. Z. Dong, Yan Ni Shen, Fengming Du, Jiujun Xu, M. Jin

Strength of Materials

DOI

2018

第十二届国际摩擦学研讨年会“发动机工业中摩擦学”将于2018年11月召开

徐久军

《中国表面工程》

2018

水平缸套发动机油膜分布状态在线测量技术研究

韩晓光，陈文滨，袁晓帅，关健，陈泽忠，徐久军

《内燃机工程》

2018

Wear Properties and Scuffing Resistance of the Cr–Al2O3 Coated Piston Rings: The Effect of Convexity Position on Barrel Surface

Siqi Ma, Wenbin Chen, Chengdi Li, Mei Jin, Ruoxuan Huang, Jiujun Xu

Journal of Tribology

DOI

2018

Modeling of Gas Pressure and Dynamic Behavior of the Piston Ring Pack for the Two-Stroke Opposed-Piston Engine

Wenbin Chen, De-Liang Liu, Jiujun Xu, Ruoxuan Huang, Zezhong Chen, Fengming Du, Zhijun Yan

Journal of Tribology

DOI

2018

Friction Property of MoS2 Coatings Deposited on the Chemical-Etched Surface of Al–Si Alloy Cylinder Liner

Chengdi Li, Weiwei Wang, Mei Jin, Yan Ni Shen, Jiujun Xu

Journal of Tribology

DOI

2018

Reciprocating electrolyte jet with prefabricated-mask machining micro-dimple arrays on cast iron cylinder liner

Yan Ni Shen, Yutao Lv, Bin Li, Ruoxuan Huang, Baihong Yu, Weiwei Wang, Chengdi Li, Jiujun Xu

Journal of Materials Processing Technology

DOI

2017

微坑分布位置对复合润滑结构缸套摩擦磨损性能的影响规律

金梅，韩晓光，沈岩，李承娣，杜凤鸣，徐久军

《中国表面工程》

2017

冷却强度、配对副以及润滑介质对活塞环槽温度限值的影响

韩晓光，杜凤鸣，吴迪，金梅，袁晓帅，胡定云，庞铭，徐久军

《车用发动机》

2017

松孔镀铬缸套磨损机理研究

朱峰，徐久军，孙健，沈岩，韩晓光

《内燃机学报》

2017

超长直列汽缸套接缝处冲击磨损试验装置及其试验研究

王德红，徐久军，朱峰，李玉隐，徐涛

《润滑与密封》

2017

气缸套表面微造型与微纳米颗粒填充对摩擦学性能的影响

许悦雷，朱新河，徐久军，付景国，严志军，程东，马春生

《润滑与密封》

2017

铸铁缸套表面石墨含量对抗拉缸性能的影响

李雪，王维伟，沈岩，李承娣，徐久军

《表面技术》

2017

激光光整对高硅铝合金缸套材料摩擦磨损性能的影响

李承娣，金梅，徐久军，沈岩

《中国表面工程》

2017

滑移速度对织构表面气穴效应的影响

曹淑华，唐平，徐久军

《机床与液压》

2017

活塞环Cu-Sn镀层对球墨铸铁缸套摩擦性能影响

李斌，沈岩，李承娣，金梅，朱峰，徐久军

《内燃机学报》

2017

Effect of surface chemical etching on the lubricated reciprocating wear of honed Al–Si alloy

Chengdi Li, Bin Li, Yan Ni Shen, Mei Jin, Jiujun Xu

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2017

Friction performance of MoDTP and ester‐containing lubricants between CKS piston ring and cast iron cylinder liner

Weiwei Wang, Chengdi Li, Jie Yang, Yan Ni Shen, Jiujun Xu

Lubrication Science

DOI

2017

Wear behavior of the aluminum-silicon alloy cylinder liner wear against Chrom–Keramik–Schicht piston ring

Chengdi Li, Bin Li, Mei Jin, Yan Ni Shen, Jiujun Xu

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2017

Tribological performance of three surface-modified piston rings matched with chromium-plated cylinder liner

Feng Jun Zhu, Jiujun Xu, Xiaoguang Han, Yan Ni Shen, Mei Jin

Industrial Lubrication and Tribology

DOI

2017

Wear behavior of Al-Si alloy cylinder liner prepared by laser finishing

Chengdi Li, Mei Jin, Fengming Du, Weiwei Wang, Yan Ni Shen, Jiujun Xu

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2016

FeNi合金镀铁缸套的摩擦磨损性能

金梅，韩晓光，董文仲，沈岩，朱峰，徐久军

《中国表面工程》

2016

表面硅颗粒整形对高硅铝合金缸套摩擦磨损性能的影响

李承娣，徐佳子，沈岩，金梅，徐久军

《中国表面工程》

2016

陶瓷颗粒含量对Cr-Al2O3复合镀活塞环摩擦磨损性能的影响

徐佳子，李承娣，朱峰，沈岩，徐涛，徐久军

《中国表面工程》

2016

陶瓷颗粒含量对Cr-Al2O3活塞环抗黏着性能的影响

马乐，金梅，吴迪，李斌，沈岩，姜鹏程，徐久军

《车用发动机》

2016

Rounded silicon edges on the surface of Al-Si alloy cylinder liner by means of mechanical grinding treatment

Chengdi Li, Jia-Zi Xu, Jiujun Xu, Jiu-Jun Xu, Jiu-Jun Xu, Yan Ni Shen, Mei Jin

Tribology International

DOI

2016

Deposit formation on chromium-plated cylinder liner in a fully formulated oil

Feng Jun Zhu, Jiujun Xu, Xiaoguang Han, Yan Ni Shen, Mei Jin

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2016

Lubrication film thickness calculation from contact resistance measurement in point contact

De-Liang Liu, Shu-hua Cao, Shifeng Zhang, Jiujun Xu

Industrial Lubrication and Tribology

DOI

2016

Synthesis of high viscosity index base stock and study on the lubricating properties

Weiwei Wang, Shan Jiang, Yan Ni Shen, Shunba Xia, Jiujun Xu

Industrial Lubrication and Tribology

DOI

2015

缸套-活塞环三维润滑状态模拟分析

张世锋，徐久军，严志军，曹淑华

《车用发动机》

2015

基于Boltzmann方法的摩擦表面织构数值模拟

刘德良，曹淑华，崔鲁进，徐久军

《机械科学与技术》

2015

Experimental research and numerical analysis in thin film lubrication of point contact

Deliang Liu, Shu-hua Cao, Jiujun Xu

Industrial Lubrication and Tribology

DOI

2014

合金铸铁缸套与PVD(CrN)活塞环配对时缸套磨损机理

朱峰，王增全，王建平，沈岩，徐久军

《内燃机学报》

2014

缸套-活塞环摩擦磨损评价方法研究

徐久军

《工程与试验》

2014

缸套磨损表面波纹度和粗糙度形貌特征变化规律

朱亚琼，沈岩，金梅，徐久军

《中国表面工程》

2014

化学刻蚀高硅铝合金缸套的摩擦磨损性能

李承娣，沈岩，王永彬，朱峰，金梅，徐久军

《中国表面工程》

2014

CKS活塞环与合金铸铁缸套的抗拉缸性能分析

沈岩，徐久军，金梅，袁晓帅，王建平，刘烨，朱峰，王增全

《润滑与密封》

2014

气缸套活塞环摩擦副上止点附近的低速润滑特性

沈岩，徐久军，金梅，王建平，刘烨，朱亚琼，朱峰，王增全

《润滑与密封》

2014

缸套-活塞环摩擦状态转化形貌特征演变规律分析

沈岩，金梅，王建平，朱峰，徐久军，王增全

《内燃机学报》

2014

CKS活塞环与合金铸铁缸套匹配规律研究

陆传荣，朱峰，金梅，徐久军

《柴油机》

2013

基于三维的摩擦表面分形维数计算方法

孙昂，朱新河，徐久军

《润滑与密封》

2013

重载条件下缸套磨损表面的分形特征研究

孙昂，徐久军，朱新河

《润滑与密封》

2013

水润滑橡胶轴承的摩擦性能

廖明义，辛波，金美花，徐久军

《大连海事大学学报》

2012

高能球磨法制备气缸套表面强化层的技术研究

付景国，朱新河，徐久军，严志军，程东

《大连海事大学学报》

2012

点接触弹流问题中粗糙度的影响

张世锋，刘德良，孙昂，徐久军

《大连海事大学学报》

2012

基于贫油试验方法的镀铬缸套—喷钼活塞环抗黏着性能研究

金梅，沈岩，朱亚琼，严志军，朱新河，徐久军

《车用发动机》

2012

载荷对线接触热弹流温度场的影响

刘德良，孙昂，徐久军

《机床与液压》

2012

The Effects of Loads on Temperature Field of the Line Contact Thermal EHL

Jiujun Xu

Machine Tool & Hydraulics

2011

线接触弹流问题中可压缩性的影响

刘德良，孙昂，徐久军

《润滑与密封》

2011

点接触弹流问题的数值分析

刘德良，孙昂，徐久军

《大连海事大学学报》

2011

Numerical analysis of the EHL point contact problems

Jiujun Xu

Journal of Dalian Maritime University

2009

Effect of La2O3 on microstructure and high-temperature wear property of hot-press sintering FeAl intermetallic compound

Xingwei Ma, Zhuji Jin, Shi YAN, Jiujun Xu

Journal of Rare Earths

DOI

2008

缸套—活塞环摩擦学系统分析

张叶龙，赵宝刚，徐久军，严立

《中国修船》

2007

神经网络技术在缸套磨损研究中的应用

张叶龙，赵宝刚，徐久军

《船舶设计通讯》

2006

基于虚拟仪器的尼龙轴承摩擦磨损实验机设计

刘硕，朱新河，徐久军

《润滑与密封》

2006

超弹TiNi合金机敏摩擦学特性的有限元研究

王立民，徐久军，严立，杨钢，刘正东

《中国有色金属学报》

2006

新型缸套-活塞环零部件摩擦磨损试验机及其测控系统

纪玉龙，徐久军，林炳凤，陈磊，张银东

《润滑与密封》

2006

镍钛形状记忆合金冲蚀磨损研究进展

董坤，徐久军，孙玉清

《润滑与密封》

2006

热处理对NiTi形状记忆合金冲蚀磨损性能的影响

董坤，徐久军，程晓寅，石三强，纪玉龙，林炳凤，孙玉清

《摩擦学学报(中英文)》

2006

FEM study of smart tribological properties of pseudo-elastic TiNi alloys

Li-Min Wang, Jiu-Jun Xu

2005

铌铸铁缸套表面矩形硬质相的磨损行为的有限元研究

刘文莲，徐久军，姚曼

《润滑与密封》

2004

耐磨TiNi形状记忆合金设计准则的有限元研究

王立民，徐久军，严立，杨钢，刘正东

《摩擦学学报(中英文)》

DOI

2003

表面修饰纳米TiO2的表征及改善润滑油摩擦性能

孙昂，严立，朱新河，徐久军，史雅琴，高玉周

《大连海事大学学报》

2003

纳米级金属粉改善润滑油摩擦学性能

孙昂，严立，朱新河，徐久军，史雅琴，高玉周

《大连海事大学学报》

2003

基于TiNi合金的超弹性对其相关磨损机制的FEM研究

王立民，徐久军，严立，林炳凤

《材料科学与工程学报》

2003

不同材料模型的超弹TiNi合金法向接触的有限元分析

王立民，徐久军，严立，高玉周，潘新祥，朱新河，刘一梅

《中国有色金属学报》

2002

常压等离子体渗氮层摩擦学性能的试验研究

史雅琴，高玉周，刘莎，张会臣，徐久军，严立

《大连海事大学学报》

2001

TiNi合金在法向位移接触载荷作用下的有限元分析

王立民，徐久军，严立

《中国表面工程》

2000

粗糙面在梯度表面层上滑动接触的应力分布

潘新祥，严立，徐久军，王亮，高玉周

《应用力学学报》

2000

NiTi形状记忆合金沙蚀磨损的机敏行为

徐久军，严立，朱新河，严志军，杨胜，杨大智

《中国有色金属学报》

2000

船舶柴油机气缸套拉缸机理的试验研究

徐久军，严立

《润滑与密封》

1999

磨损问题的仿真求解研究

严立，徐久军，潘新祥

《摩擦学学报(中英文)》

1999

船舶柴油机缸套活塞环微观滑动接触模型研究

徐久军，严立，王鹏，刘宗利

《润滑与密封》

1999

Elastic-plastic deformation analysis of multi-layer surface coating under sliding contact

Pan Xinxiang, Yan Li, Jiujun Xu

Thin Solid Films

DOI

1998

TiNi 系形状记忆合金两体磨粒磨损机制研究

徐久军，张会臣，王刚，严立，杨大智

《大连理工大学学报》

1998

多层表面膜在滑动接触时的弹塑性有限元分析

潘新祥，徐久军，严立

《中国表面工程》

精选作品

期刊论文

Influence of wetting pinning on lubrication performance of bionic fluted structural surface under oil rich condition

Lubrication Performance of Gas–Liquid Two-Phase through Low-Surface-Energy Textures with Bubble Inducing and Stabilizing

Impact of Different Solid Lubricant-Filled Micro-textures on Anti-wear Performance for Chrome-Plated Liners

表面织构分布模式对滑动摩擦副流体润滑性能的影响

基于超声波的涂层活塞环油膜厚度仿真

Introducing PES porous membrane to establish bionic autocrine channels: A lubricating, anti-wear antifouling coating.

Tribofilm Enhancement of Aminoguanidine Ionic Liquid With ZDDP/MoDTC for Heavy-Duty Interface

The effect of electrodeposition combined with surface texturing on the tribology performance of cylinder liner

Ultra-low friction with SiO2 nanoparticles bonded sorbitan monostearate oleogel as green lubricant additives

Improved Friction and Wear Performance Utilized with Aminoguanidine-Based Ionic Liquid Over Wide Temperature Range for Reciprocating Frictional Contact Surface

Wear Reliability Assessment of Piston Ring and Cylinder Liner Components Based on Probability Mapping

Effects of ionic liquid and MoDTC additives on the anti-wear performance of soot-containing lubricants for tribopair interface

Friction characteristics of rapid spreading surface with annular microtexture at reciprocating contact interface

Lubrication performance of 5CB liquid crystal combined with different wear-resistant coatings on friction surface

Effects of double-sided textures matching on friction and wear performance in reciprocating contact interface

Preparation and tribological properties of the friction induced Mo-based film

Low and high temperature effects on friction and wear performance of Cr-plated cylinder liner

A new efficient flow continuity lubrication model for the cylinder liner‐piston ring based on the locally oriented roughness

Tribological performance of lubricant with high concentration graphene additive dispersed by ultrasonic technology

The effect of MoS2 concentration on the thickness and tribology performance of electro-codeposited Ni–Cr–MoS2 coatings

Tribological Properties of Nano-Scale Al2O3 Particles with Different Shapes as Lubricating Oil Additives

Wear life prediction of piston ring and cylinder liner based on integration of experiment and bench test data

Earthworm Skin Inspired Rapid Secretion of Continuous Liquid Slippery Film via Nanochannels

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

电解微织构对镀铬气缸套摩擦磨损性能的影响

Effect of Laser Surface Texturing on the Tribological Properties and Scuffing Mechanism of CKS Piston Ring Against Cast Iron Cylinder Liner Under High Intensifying

Characterization and tribology performance of polyaniline-coated nanodiamond lubricant additives

CKS活塞环表面微织构几何形貌及排布方式对摩擦学性能的影响

液相等离子制备石墨烯润滑添加剂的摩擦磨损特性

基于双点接触电阻法的润滑状态研究

激光表面织构微坑形貌及面积占有率对氮化气缸套摩擦学性能的影响

Enhancement of heavy-duty friction and wear characteristics of cast-iron surface by electrolytic micro-textures filled with MoS2

Tribological performance and scuffing behaviors of several automobile piston rings mating with chrome-plated cylinder liner

Cyclic Indentation Method Applied to Evaluating Surface Degradation of Cylinder-Piston Group Parts

激光参数对硼磷合金铸铁缸套微坑形貌影响研究

典型激光参数对高硅铝合金缸套表面微坑几何形貌影响

基于电阻法的双点接触摩擦试验装置

The influence of protruding silicon particle shape on the friction performance of Al–Si alloy

Effects of molecular structures of poly α-olefin mixture on nano-scale thin film lubrication

Friction and wear behavior of Al–Si alloy cylinder liner prepared by surface shaping treatments

Tribological performance of nano-diamond composites-dispersed lubricants on commercial cylinder liner mating with CrN piston ring

珩磨角和粗糙度对CuNiCr气缸套摩擦学性能的影响

轴向分区冷却方式对气缸套-活塞环摩擦功耗影响的仿真研究

Anti-Wear Property of Aluminum–Silicon Alloy Treated by Chemical Etching, Mechanical Honing and Laser Finishing

Wear Evolution of the Glass Fiber-Reinforced PTFE under Dry Sliding and Elevated Temperature

The Effect of Honing Angle and Roughness Height on the Tribological Performance of CuNiCr Iron Liner

Friction Performance of Aluminum-Silicon Alloy Cylinder Liner after Chemical Etching and Laser Finishing

On the Adhesive Strength Quantification and Tribological Performance of the Multilayered Fe–Ni Coating Fabricated by Electroplating

第十二届国际摩擦学研讨年会“发动机工业中摩擦学”将于2018年11月召开

水平缸套发动机油膜分布状态在线测量技术研究

Wear Properties and Scuffing Resistance of the Cr–Al2O3 Coated Piston Rings: The Effect of Convexity Position on Barrel Surface

Modeling of Gas Pressure and Dynamic Behavior of the Piston Ring Pack for the Two-Stroke Opposed-Piston Engine

Friction Property of MoS2 Coatings Deposited on the Chemical-Etched Surface of Al–Si Alloy Cylinder Liner

Reciprocating electrolyte jet with prefabricated-mask machining micro-dimple arrays on cast iron cylinder liner

微坑分布位置对复合润滑结构缸套摩擦磨损性能的影响规律

冷却强度、配对副以及润滑介质对活塞环槽温度限值的影响

松孔镀铬缸套磨损机理研究

超长直列汽缸套接缝处冲击磨损试验装置及其试验研究

气缸套表面微造型与微纳米颗粒填充对摩擦学性能的影响

铸铁缸套表面石墨含量对抗拉缸性能的影响

激光光整对高硅铝合金缸套材料摩擦磨损性能的影响

滑移速度对织构表面气穴效应的影响

活塞环Cu-Sn镀层对球墨铸铁缸套摩擦性能影响

Effect of surface chemical etching on the lubricated reciprocating wear of honed Al–Si alloy

Friction performance of MoDTP and ester‐containing lubricants between CKS piston ring and cast iron cylinder liner

Wear behavior of the aluminum-silicon alloy cylinder liner wear against Chrom–Keramik–Schicht piston ring

Tribological performance of three surface-modified piston rings matched with chromium-plated cylinder liner

Wear behavior of Al-Si alloy cylinder liner prepared by laser finishing

FeNi合金镀铁缸套的摩擦磨损性能

表面硅颗粒整形对高硅铝合金缸套摩擦磨损性能的影响

陶瓷颗粒含量对Cr-Al2O3复合镀活塞环摩擦磨损性能的影响

陶瓷颗粒含量对Cr-Al2O3活塞环抗黏着性能的影响

Rounded silicon edges on the surface of Al-Si alloy cylinder liner by means of mechanical grinding treatment

Deposit formation on chromium-plated cylinder liner in a fully formulated oil

Lubrication film thickness calculation from contact resistance measurement in point contact

Synthesis of high viscosity index base stock and study on the lubricating properties

缸套-活塞环三维润滑状态模拟分析

基于Boltzmann方法的摩擦表面织构数值模拟