窦益华

期刊论文

1. 章娅菲，许博军，张嘉华，窦益华（2026）. 弹簧护肩封隔器胶筒弹簧参数对密封性能影响分析. 《石油机械》.
2. 李明飞，王骁宇，李必红，王喜，窦益华，郑杰，李俊超（2026）. 射孔减震机理和射孔段管柱强度安全性研究进展. 《世界石油工业》.DOI
3. 万志国，刘君林，王健，秦彦斌，窦益华（2026）. 基于BPNN-Optuna-XGBoost的套管剩余强度智能预测模型. 《科学技术与工程》.
4. 马成云，段嘉骏，窦益华（2026）. 基于压降比的流道型AICD数值模拟研究. 《机电工程技术》.
5. 窦益华，黄海豪，万志国，马文海，陆红军，李国平（2026）. 油气井套管异常损坏因素分析与防治措施及其数智赋能. 《世界石油工业》.DOI
6. 曹银萍，马润青，温淼，于洋，窦益华（2026）. 基于全瞬态与半瞬态法的气井温压耦合及影响因素分析. 《石油与天然气化工》.
7. 窦益华，段嘉骏（2026）. 双入口流道型AICD流体敏感性分析. 《机电工程技术》.
8. Yafei Zhang, Weiguo Hao, Meimei Song, Yihua Dou, Lu-Yu Shi (2026). Service life prediction of spring-shoulder packer rubber based on tension–compression dual criterion. Engineering Failure Analysis.DOI
9. Haihao Huang, Zhiguo Wan, Yihua Dou, Haiqing Wen, Zehan Zheng, Wei Zhang, Zhanshan Niu (2026). Parametric FEM–CLPSO–LightGBM Surrogate Model for Deformation Prediction of Casings in Creep Formations. Applied Sciences.DOI
10. Zhitong Song, Wu Jiang, Hongxue Mi, Yinping CAO, Yihua Dou (2026). Analysis of Annular Pressure Drop Resistance across Tubing Joints Based on CFD and Nonlinear Fitting. SAE technical papers on CD-ROM/SAE technical paper series.DOI
11. Shiju Ren, Tianen Liu, Zhiguo Wan, Yihua Dou, Yan Xia, Kun Dai (2026). Collapse resistance and critical minimum wall thickness of eccentrically worn casing in deep wells. IET conference proceedings..DOI
12. Wenzhe Zhang, Wu Jiang, Ziwang Guo, Yinping CAO, Yihua Dou (2026). Analytical Analysis of Wellbore Stresses under Fluid Pressure and In-Situ Stress in Three-Dimensional Wellbores. SAE technical papers on CD-ROM/SAE technical paper series.DOI
13. Yinping CAO, Yujie Zhang, Qingying Yuan, Yang Yu, Yihua Dou (2026). Investigation on hydrogen-induced damage mechanism and sealing performance of 80S steel premium connections in hydrogen storage conditions. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
14. Haiqing Wen, Yihua Dou (2026). Deep Learning Model and Application for 3D Morphology Reconstruction of Casing Damage. Springer Link (Chiba Institute of Technology).DOI
15. Shuai Xue, Jiaxin Song, Yang Yu, Yinping CAO, Yihua Dou (2026). Nonlinear Evolution of Natural Frequencies in Premium Threaded Connections Under Varying Contact Stiffness: An Experimental Study. Applied Sciences.DOI
16. Yafei Zhang, Shengrong Wei, Qihui Wang, Xiaole Chen, Yihua Dou, Luyu Shi (2026). Mechanics-based design and sealing performance evaluation of bridge plug rubber cylinders with gradient porous structures. Mechanics Based Design of Structures and Machines.DOI
17. Chengyun Ma, Zehan Zheng, Yihua Dou, Wenjun Shan, Wei Wang (2026). Research on drilling fluid lost circulation and fracture width inversion in complex fractured formations based on fluid-solid coupling. Geomechanics for Energy and the Environment.DOI
18. H. Zhang, Xin Cao, Zhiming Jing, Guoliang Liu, MingFei Li, Yihua Dou (2026). Study on Distribution Law of Ground Stress Under Fracturing Condition Based on FLAC3D. Springer series in geomechanics and geoengineering.DOI
19. Haiqing Wen, Yihua Dou (2026). Deep Learning Model and Application for 3D Morphology Reconstruction of Casing Damage. E3S Web of Conferences.DOI
20. 窦益华，饶一伍，李明飞，张伟，朱松青，梁经纬（2025）. 充填射孔枪的射孔液压力脉动及管柱应力分析. 《石油机械》.
21. 秦彦斌，王健，万志国，李琳琳，窦益华（2025）. 基于RGPSO-LightGBM的套管磨损深度预测. 《石油机械》.
22. 郑杰，尚祖跃，刘卫东，窦益华，翁光远，苏楠，杨旭（2025）. 输油气管道机器人研究现状与展望. 《石油机械》.
23. 李明飞，张丹鹏，李必红，贺建磊，田斌，林立明，窦益华（2025）. 射孔枪泄压装置设计及强度安全性分析. 《石油机械》.
24. 李明飞，黄靖富，贾海，窦益华，梁经纬，桑鹏飞（2025）. 倾斜角度射孔套管剩余强度有限元分析. 《测井技术》.DOI
25. 万志国，赵伟，王治国，窦益华（2025）. 基于优化VMD-NLM与1DDRSN的齿轮箱故障诊断方法. 《机械传动》.
26. 万志国，张志泰，刘君林，窦益华（2025）. 油套管泄漏地面检测技术现状与展望. 《非常规油气》.DOI
27. 曹银萍，杜恒，陈刚，窦益华，杨亚龙（2025）. 热固耦合作用下水泥环缺失对套管强度的影响分析. 《机电工程技术》.
28. 马成云，窦益华，邓金根，赵凯，窦亮彬（2025）. 预充填挡砂介质对筛管过流能力影响的实验研究. 《西安石油大学学报(自然科学版)》.
29. Yunbin Ma, Kun He, Da-Chao Su, Bo Wan, Jie Zheng, Yihua Dou, Li Wang, Z. Ren, Cheng Bi (2025). Research progress on wax deposition mechanisms, influencing factors, prediction models, and wax removal and prevention measures in petroleum systems. Energy Exploration & Exploitation.DOI
30. Xiao-Feng Dang, Yao Li, Jie Zheng, Lu-Qing Cui, Kaiju Lu, Xiao-Qing Liang, Si-Hai Luo, Guang-Ni Zhou, Yang Jiao, Yihua Dou, Liu-Cheng Zhou, Wei-Feng He (2025). Shear banding mediated fracture mechanisms in additively manufactured IN738 superalloys under low-strain-rate loading. International journal of plasticity.DOI
31. Jun-Yan Liu, Wei Zhang, Tian-Ping Gu, Ju Liu, Jian-Xin Peng, Yihua Dou (2025). Mechanical Analysis of Lined Pipe System Under Temperature–Pressure Coupling in Elastic Laying. Processes.DOI
32. Yafei Zhang, Jing-Wei Liang, Bo Zhang, Yihua Dou, Wenjia Cheng (2025). Investigation of Dissolution and Sealing Performance of a Soluble Rubber Cylinder with Honeycomb Structure. Polymer testing.DOI
33. Lintao Li, Peng Cheng Su, Xiuping Chen, Yihua Dou, Yinping Cao (2025). Temperature-pressure coupling study of production tubing column of ultra-deep wells in a western oilfield.DOI
34. Jun Zhang, Shuren Liu, Zhangming Zou, Daokun Sun, Han Wang, Fenglan Xu, Yihua Dou (2025). Well test model coupled with heat and flow for high temperature and high pressure stress-sensitive reservoir. International Conference on Mathematics and Machine Learning (ICMML).DOI
35. Jingwei Liang, Yafei Zhang, Chang-jiang Han, Yihua Dou (2025). Out-of-Plane Bearing Capacity of Nanofluidic-Filled Honeycomb Composites: A Combined Finite Element and Parametric Study. Journal of Materials Engineering and Performance.DOI
36. Xiangyang Wu, Jianxun Li, Dong Chen, Yinping Cao, Yihua Dou, Xin Luo (2025). Tubing String Dynamics During Transient Start-Up and Shutdown in CO2 Flooding. Processes.DOI
37. Xiangyang Wu, Jianxun Li, Dong Chen, Yinping CAO, Yihua Dou (2025). Modeling and MATLAB Solution of FSI Vibration Equations for CO 2 -Compressible Tubing.DOI
38. Zhiguo Wan, Wei Zhao, Yanbin Qin, Yihua Dou (2025). Fusion of enhanced ACGAN and MSACNN for small samples of rotating machinery fault diagnosis methods. Engineering Research Express.DOI
39. Lian Liu, Zhongwei Huang, Peng Cheng Su, Yinping Cao, Yihua Dou (2025). Softening of Production Tubing Under Random Vibration Excitation and Prediction of Fatigue Life of the Entire Wellbore. Processes.DOI
40. Jie Zheng, Kun He, Pengyu Zhao, Yihua Dou, Boli Yang, Cheng Bi (2025). Study on hydrodynamic dual acoustic wax prevention based on arbitrary Lagrangian-Eulerian fluid-solid coupling methods. Petroleum Science and Technology.DOI
41. Yang Yu, Yang Liu, Yinping Cao, Qingying Yuan, Jiarui Tang, Yihua Dou (2025). Analysis of Energy Dissipation and Sealing Performance of the Premium Connection in Modal Vibrations. Applied Sciences.DOI
42. Jingwei Liang, Nan Qiang, Yong Wang, Yihua Dou, Yafei Zhang (2025). Research Status and Prospect of Perforation Technology in Oil and Gas Wells. Springer series in geomechanics and geoengineering.DOI
43. 曹银萍，刘渝，于洋，李贞贞，窦益华（2024）. 特殊螺纹接头密封面微滑接触行为研究. 《润滑与密封》.
44. 李明飞，董帆，曹欣，陈万林，梁经纬，窦益华（2024）. 椭圆度和偏心及微裂纹缺陷套管剩余强度分析. 《中国科技论文》.
45. 刘君林，万志国，满振峰，李国平，夏雪，罗敬兵，窦益华（2024）. 聚焦于碰摩诱导的非规则形貌套管磨损分析. 《石油机械》.
46. 王智勇，朱帅，曹银萍，万志国，窦益华（2024）. RTTS封隔器外中心管疲劳寿命分析. 《石油机械》.
47. 马成云，窦益华，邓金根，窦亮彬，姜海龙，郑杰（2024）. 外保护套对预充填筛管过流能力的影响研究. 《石油机械》.
48. 李明飞，张超，黄文鑫，张伟，梁经纬，窦益华（2024）. 射孔和储层参数对压裂裂缝扩展规律影响分析. 《石油机械》.
49. 窦益华，王子迪，李国亮，张伟，于洋（2024）. 基于Iwan模型的特殊螺纹接头密封面滞回曲线. 《中国石油大学学报(自然科学版)》.
50. 郑杰，白杨杰，任丰伟，窦益华（2024）. 连续油管井下牵引器自适应控制设计及仿真. 《计算机仿真》.
51. 曹银萍，潘莹，窦益华，郑杰（2024）. 连续管磨损程度及剩余抗内压强度敏感性分析. 《机械设计与制造》.
52. 秦彦斌，李俊城，于洋，曹银萍，窦益华（2024）. 球面-锥面特殊螺纹接头密封面能量耗散及密封性分析. 《机电工程技术》.
53. 李明飞，邱金平，刘军严，张伟，陈超峰，江武，王峰，李必红，窦益华（2024）. 弹间干扰对聚能射流成型及射孔穿深的影响规律. 《天然气工业》.
54. 章娅菲，窦益华，万志国（2024）. 翻转课堂教学模式在计算方法课程教学中的应用. 《西部素质教育》.
55. 李明飞，张明友，黄靖富，梁经纬，窦益华，景思宇（2024）. 射孔参数对定面射孔套管剩余强度的影响分析. 《油气井测试》.
56. Tian-Ping Gu, Zhanghua Lian, Yihua Dou, Z. Wu, Guo-Ping Li (2024). Simulation and experimental study on liner collapse of lined composite pipe. International Journal of Pressure Vessels and Piping.DOI
57. MingFei Li, Jingwei Liang, Yihua Dou (2024). Experimental Study on Mechanical Properties of Rock in Water-Sensitive Oil and Gas Reservoirs Under High Confining Pressure. Applied Sciences.DOI
58. Yinping Cao, Pengsheng Gu, Yu Lan Yang, Yihua Dou (2024). Research on Sealing Premium Connections in Corrosive CO2 Environments. Processes.DOI
59. Yu Yang, Yimeng Chen, Yihua Dou, Qingying Yuan, Jiarui Tang, Yinping Cao (2024). Parameter Identification and Energy Dissipation Analysis of Premium Connections Based on the Iwan Model. Processes.DOI
60. Wangyin Zuo, Yihua Dou, Junyan Liu, Lili Li, Wei Zhang (2024). Research on Temperature–Pressure Coupling Model of Gas Storage Well during Injection Production. Processes.DOI
61. Chengyun Ma, Yongcun Feng, Yihua Dou, Mingming Chu, Kai Zhao, Jingen Deng (2024). Experimental study on the design method of lost circulation materials for induced fractures. Geoenergy Science and Engineering.DOI
62. Jie Zheng, Jiahui Li, Weixiao Wang, Yihua Dou, Yang Xu, Yarong Zhang (2024). Establishment and application of temperature–pressure coupling model for opening and closing wells in HTHP gas wells. Energy Exploration & Exploitation.DOI
63. Jie Zheng, Zhihao Hu, Weixiao Wang, Yihua Dou, Jiahui Li, Yang Xu, Yarong Zhang, Yinping Cao (2024). Computational Fluid Dynamics Modeling and Analysis of Axial and Radial Temperature of Wellbore during Injection and Production Process. SPE Journal.DOI
64. 曹银萍，陈泽田，窦益华，郑杰，康钊飞（2023）. 螺旋屈曲状态下连续管冲蚀因素分析. 《石油机械》.
65. 曹银萍，康钊飞，李国亮，窦益华，孙祥鑫，郑杰，陈泽田（2023）. 基于Johnson-Cook模型的剪切闸板性能仿真. 《石油机械》.
66. 于洋，屈展，许富艳，曹银萍，窦益华，刘渝（2023）. 振动工况下特殊螺纹接头密封性能仿真研究. 《石油机械》.
67. 李国亮，张佳强，韦亮，曹银萍，窦益华（2023）. 基于BP神经网络的不同内压下连续油管疲劳寿命预测. 《机械设计与制造工程》.
68. 窦益华，张佳强，李国亮，韦亮，曹银萍（2023）. 基于优化BP神经网络的连续管疲劳寿命预测. 《石油机械》.
69. 郑杰，尚祖跃，窦益华，杨旭（2023）. 模块化同步自主变径输气管道机器人的研究设计. 《石油机械》.
70. 朱帅，王智勇，姜丽萍，南黄河，李明飞，窦益华（2023）. 井下安全阀力学行为仿真分析及性能曲线研究. 《石油机械》.
71. 马成云，窦益华，邓金根，冯永存，艾二鑫，赵凯，惠城（2023）. 动态裂缝堵漏试验装置的研制与应用. 《石油机械》.
72. 崔璐，邹方，程嘉瑞，王澎，李臻，窦益华（2023）. 全金属可溶桥塞异形接触结构密封特性. 《润滑与密封》.
73. 曹银萍，方凤英，潘莹，魏文澜，窦益华（2023）. 多工况连续油管疲劳寿命预测方法研究. 《钻采工艺》.
74. 仝少凯，岳艳芳，孙虎，张宏忠，王治国，窦益华，韩锐（2023）. 波动压裂作用下岩石破坏过程的损伤演化机制. 《2023油气田勘探与开发国际会议论文集Ⅰ》.DOI
75. 曹银萍，王璐瑶，窦益华，孙祥鑫（2023）. CO2驱注入管柱流固耦合振动模态分析. 《石油工业技术监督》.
76. 曹银萍，张祖琪，窦益华（2023）. CO2驱注入管柱温度压力耦合模型建立及其敏感性因素研究. 《中国科技论文》.
77. 章娅菲，闵世威，王海涛，梁经纬，窦益华（2023）. TPU蜂窝结构压缩及吸能特性研究. 《塑性工程学报》.
78. 章娅菲，肖洪玖，刘慎磊，桑鹏飞，窦益华（2023）. 孔径尺寸对梯级蓄能纳米流控系统特性的影响研究. Journal of Molecular Science.
79. 曹银萍，刘渝，于洋，窦益华（2023）. 气密封检测对特殊螺纹油管接头密封性能的影响. 《机电工程技术》.
80. 窦益华，童乐，刘卫东，李贞贞（2023）. 一种分层注水偏心配水器设计. 《机电工程技术》.
81. 章娅菲，万志国，窦益华（2023）. 有效性失败在机械类专业学习中的应用. 《装备制造技术》.
82. 窦益华，李贞贞，郑杰，李家辉，徐子凡（2023）. 基于瞬态温度场的桥塞段温度压力变化规律研究. 《机电工程技术》.
83. 章娅菲，张嘉华，魏文澜，窦益华（2023）. 智能传感器系统课程案例库建设与研究. 《机电工程技术》.
84. 窦益华，赵兴邦，米红学，贺建磊，牛占山，李明飞（2023）. 典型工况下完井管柱井下安全阀力学性能分析. 《石油钻采工艺》.
85. 王智勇，刘军严，朱帅，窦益华（2023）. 封隔器胶筒非线性仿真及性能评价. 《机械制造与自动化》.
86. Chengyun Ma, Yihua Dou, Jingen Deng, Cheng Hui, Kai Zhao, Yongcun Feng, Liangbin Dou (2023). Numerical simulations of sand‐screen performance in unconsolidated prepacked gravel screen. Energy Science & Engineering.DOI
87. Jie Zheng, Zhihao Hu, Yihua Dou, Jiahui Li, Yanbin Qin, Yang Xu, Yarong Zhang (2023). Experimental Study of Hydraulic Cavitation Tool for CBM Production Enhancement. Arabian Journal for Science and Engineering.DOI
88. Jie Zheng, Jiahui Li, Yihua Dou, Yichen Zhang, Yang Xu, Yarong Zhang (2023). Research progress on the calculation model of critical liquid carrying flow of gas well. Energy Science & Engineering.DOI
89. Jie Zheng, Jiahui Li, Yihua Dou, Zhihao Hu, Yang Xu, Yarong Zhang (2023). Research on Downhole Throttling Characteristics of Gas Wells Based on Multi-Field and Multi-Phase. Processes.DOI
90. Yafei Zhang, Haitao Wang, Hongjiu Xiao, Shenlei Liu, Wenlan Wei, Yihua Dou (2023). Study of Temperature Effect on Cascade Characteristics of Nanofluidic Energy Absorption System. Applied Sciences.DOI
91. Yafei Zhang, Yuqing Zhai, Shiwei Min, Yihua Dou (2023). The Influence of Layer Stacking Method on the Mechanical Properties of Honeycomb Skeleton. Materials.DOI
92. Yafei Zhang, Jiahua Zhang, Rui Luo, Yihua Dou (2023). Experimental Study on the Effects of Applied Electric Field on Liquid Infiltration into Hydrophobic Zeolite. Energies.DOI
93. Yang Yu, Yinping Cao, Zhan Qu, Yihua Dou, Zidi Wang (2023). Finite-Element Analysis on Energy Dissipation and Sealability of Premium Connections under Dynamic Loads. Processes.DOI
94. Yafei Zhang, Taihao Fan, Pengbo Zhang, Yihua Dou (2023). Structural Design and Sealing Performance Analysis of a Nanofluidic Self-Heating Unsealing Rubber Cylinder. Energies.DOI
95. Yang Yu, Zhan Qu, Yinping Cao, Yihua Dou, Juncheng Li (2023). Sealability Analyses of Premium Connections Characterized by a Surface Fractal Function. Applied Sciences.DOI
96. 李凡，王夫军，窦益华，李占春，于洋，万志国（2022）. 特殊螺纹接头密封面能量耗散与密封特性研究. 《石油机械》.
97. 满振峰，窦益华，秦彦斌，刘君林，万志国（2022）. 磨损形貌特征对套管承载性能影响的有限元分析. 《机电工程技术》.
98. 章娅菲，闵世威，王海涛，高漫，窦益华（2022）. 纳米流控封隔器胶筒一级蜂窝骨架承压分析. 《石油机械》.
99. 潘登，李家辉，郑杰，窦益华，李贞贞（2022）. 四闸板防喷器悬挂闸板卡瓦牙力学性能分析. 《石油机械》.
100. 章娅菲，梁经纬，刘军严，肖洪玖，窦益华（2022）. 纳米流控胶筒蜂窝骨架共面压缩吸能特性研究. 《石油机械》.
101. 李凡，窦益华，于洋，曹银萍（2022）. 锥面-锥面特殊螺纹接头密封面处能量耗散有限元分析. 《机电工程技术》.
102. 窦益华，强楠，于洋，曹银萍（2022）. 特殊螺纹油管接头上扣扭矩有限元分析. 《机电工程技术》.
103. 程嘉瑞，王忠政，张文哲，崔璐，窦益华（2022）. 深井测试绳缆受力分析及工具串配重规律研究. 《测井技术》.
104. 朱帅，李明飞，姜丽萍，窦益华，王智勇（2022）. 基于改进西原体模型的岩石流变特性分析. 《石油工业技术监督》.
105. 窦益华，韩硕，郑杰，李贞贞（2022）. 国内高温高压井下工具试验装置发展现状综述. 《石油化工应用》.
106. 曹银萍，张祖琪，窦益华（2022）. 基于FPGA的磁流变抑振器控制系统设计. 《新技术新工艺》.
107. 李明飞，康兵辉，王桥，窦益华（2022）. 典型工况下完井管柱伸缩管力学分析及安全性评价. 《石油钻采工艺》.
108. 郑杰，李家辉，万志国，李润洲，窦益华（2022）. 卓越计划2.0背景下机械设计制造及其自动化专业“三位一体”层次化实践教学体系优化. 《科技风》.
109. 窦益华，缑雅洁，郑杰，李贞贞（2022）. 高温高压气井温度压力耦合分布研究. 《机械设计与制造工程》.
110. 窦益华，徐浩，李明飞（2022）. 超深井下射孔弹侵彻超强砂岩的ALE仿真. 《应用力学学报》.
111. Zhi-Guo Wang, Haoyu Chen, Meng Wang, Xu Zhang, Yihua Dou (2022). Solid particle erosion prediction in elbows based on machine learning and swarm intelligence algorithm. Journal of Petroleum Science and Engineering.DOI
112. Jie Zheng, Jiahui Li, Yong Zheng, Yihua Dou, Yarong Zhang (2022). Mechanical Performance Analysis of the Contact Between of BOP Hanging Ram Slips and Oil Pipe. IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC).DOI
113. Yang Fan Yu, Zhan Qu, Yinping Cao, Yihua Dou (2022). The simulation analysis of sealing performance of cone-cone premium tubing connection under combined loads. Journal of Physics Conference Series.DOI
114. Yanbin Qin, Yinping Cao, Yihua Dou, Wenwen Lin, Jiahao Cao, Luyao Wang (2022). Strength Failure of CO2 Injection Tubular Strings Considering CO2 Phase Transition. Energies.DOI
115. Yang Yu, Zhan Qu, Yihua Dou, Yinping Cao (2022). Analysis of Energy Dissipation on the Sealing Surface of Premium Connection Based on a Microslip Shear Layer Model. Energies.DOI
116. Airong Xu, Yihua Dou, Changxing Feng, Jie Zheng, Xianke Cui (2022). Coiled Tubing Erosion Prediction and Fracturing Fluid Parameters Optimization During Hydraulic Jet Fracturing. Journal of Failure Analysis and Prevention.DOI
117. Jie Zheng, Cheng Bi, Heng Lu, Zhenzhen Li, Xu Yang, Yushan Yang, Yuan Lu, Yihua Dou, Yarong Zhang (2022). Design and Performance Analysis of Toothless Slip Type Magnetic Rotary Oil Well Pipe Tong. Journal of Physics Conference Series.DOI
118. Jie Zheng, Zhenzhen Li, Yihua Dou, Yarong Zhang, Cheng Bi, Yang Xu, Jiahui Li (2022). Study on Downhole Throttling Characteristics of High Water Content Gas. Geofluids.DOI
119. Jie Zheng, Yihua Dou, Zhenzhen Li, Yarong Zhang, Yang Xu, Cheng Bi (2022). Analysis on Fishing Failure Mechanism of Downhole Choke in Tight Gas Well. Journal of Failure Analysis and Prevention.DOI
120. Yafei Zhang, Jingwei Liang, Hongtao Liu, Hongxue Mi, Yihua Dou (2022). Recent Advances in Metallic Honeycomb Structure. Springer eBooks.DOI
121. Yang Yu, Yinping Cao, Fangting Hu, Maoxian Xiong, Yihua Dou (2022). Stress Analysis of Premium Tubing Connection with Different Make-Up Torque in Different Well Depth. Springer eBooks.DOI
122. 呼焕苗，曹银萍，韦亮，牛占山，潘莹，窦益华，郑杰（2021）. 缠绕弯曲多次循环下连续油管疲劳寿命仿真分析. 《机电工程技术》.
123. 章娅菲，高漫，窦益华，罗睿（2021）. 纳米流控封隔器胶筒蜂窝骨架承压性能研究. 《石油机械》.DOI
124. 张瑞萍，祝云，窦益华，杨晓儒，李明飞（2021）. 基于FLAC3D的压裂工况下地应力重新分布规律研究. 《石油机械》.
125. 曹银萍，李昊，万志国，窦益华（2021）. 修井钻磨涡动钻柱诱发套管磨损程度分析. 《石油机械》.
126. 王治国，屈航，窦益华，王文娟，曹锴（2021）. 清水与非牛顿胍胶溶液中磨料射流冲蚀行为对比. 《表面技术》.DOI
127. 张瑞萍，陈强，窦益华，于洋，郑杰（2021）. 非周期耦合式连续管减阻器设计. 《机电工程技术》.
128. 万志国，贺王鹏，廖楠楠，窦益华，郭宝龙（2021）. 齿根裂纹与齿面剥落故障的振动响应机理研究. 《西安电子科技大学学报》.
129. 万志国，窦益华，张明泉，李锁斌（2021）. 齿轮系统动力学模型内部激励参数的优化设置研究. 《机械设计与制造》.DOI
130. 郑杰，窦益华，万志国，曹银萍，章娅菲（2021）. 基于学科竞赛引领创新型人才培养的研究与实践. 《轻工科技》.
131. 李明飞，孙伟，王博，窦益华（2021）. SPH粒子初始化均布方法及其均布质量评价. 《力学季刊》.DOI
132. 田柯，高尔斯，王汉，崔璐，窦益华（2021）. 气举柱塞偏心环空间隙流场数值分析. 《科学技术与工程》.
133. 朱帅，李明飞，窦益华（2021）. 水泥环缺陷对套管强度安全性的影响分析. 《河南科学》.
134. 徐浩，李明飞，窦益华（2021）. 靶板强度对射孔弹穿深影响的有限元仿真. 《机电工程技术》.
135. Jie Zheng, Yihua Dou, Zhenzhen Li, Xin Yan, Yarong Zhang, Cheng Bi (2021). Investigation and application of wellbore temperature and pressure field coupling with gas–liquid two-phase flowing. Journal of Petroleum Exploration and Production Technology.DOI
136. Wei Zhang, Hongtao Liu, Yihua Dou, Xiaozeng Wang, Yinping Cao (2021). Experimental study of hoop stress of crescent shaped and eccentric worn casing. IOP Conference Series Earth and Environmental Science.DOI
137. Yinping Cao, Ying Jun Pan, Hongxue Mi, Jianxing Wang, Zhanshan Niu, Yihua Dou (2021). Analysis of the running capacity of coiled tubing in three-dimensional curved borehole. IOP Conference Series Earth and Environmental Science.DOI
138. Yinping Cao, Zetian Chen, Ying Pan, Jianxing Wang, Hongxue Mi, Yihua Dou (2021). Sensitivity analysis of coiled tubing erosion wear based on FLUENT. Journal of Physics Conference Series.DOI
139. Zhiguo Wang, Zaiqiang Wang, Wei Huang, Yihua Dou, Yinping Cao (2021). Progress in mechanical analysis of CO2 flooding injection string. IOP Conference Series Earth and Environmental Science.DOI
140. Yihua Dou, Wenlan Wei, Yinping Cao, Lu Cui (2021). Strengthening Mechanism of Low Cycle Fatigue Resistance for Cr-Mo Tempered Martensite Steel at 350 °C. Journal of Materials Engineering and Performance.DOI
141. Zhiguo Wan, Yihua Dou, Hao Li, Xinjuan Wei (2021). Modeling and Vibration Analysis of a Gear Rotor-Bearing System with a Shaft Crack. Journal of Failure Analysis and Prevention.DOI
142. Kelin Wang, Wei Zhang, Yihua Dou, Xiaozeng Wang, Yinping Cao (2021). Stresses and deformations of an eccentric cylindrical cam during hydro-joining. MATEC Web of Conferences.DOI
143. 窦益华，王智勇，曹银萍，郑杰（2020）. 水力诱振式双向耦合连续管减阻器设计. 《石油机械》.DOI
144. 李明飞，窦益华，刘玉雪（2020）. 射孔套管应力强度及影响因素仿真分析. 《计算机仿真》.
145. 李明飞，窦益华，曹银萍，李浩（2020）. 力法在多封隔器管柱轴向力分析中的应用. 《西安石油大学学报(自然科学版)》.
146. Yihua Dou, Zhen Li, Jiarui Cheng, Yafei Zhang (2020). Experimental Study on Corrosion Performance of Oil Tubing Steel in HPHT Flowing Media Containing O2 and CO2. Materials.DOI
147. Zhiguo Wan, Yu Wang, Binqiang Chen, Yihua Dou, Xinjuan Wei (2020). The Vibration of a Transversely Cracked Rotor Supported by Anisotropic Journal Bearings with Speed-Dependent Characteristic. Applied Sciences.DOI
148. Jie Zheng, Xin Yan, Yihua Dou (2020). Research on Failure Characteristics of Natural Gas Downhole Throttle. Journal of Failure Analysis and Prevention.DOI
149. Yihua Dou, Yufei Li, Yinping Cao, Yang Yu, Jiantao Zhang, Lin Zhang (2020). FE simulation of sealing ability for premium connection based on ISO 13679 CAL IV tests. International Journal of Structural Integrity.DOI
150. Wenhai Ma, Hang Qu, Weiming Huang, Yihua Dou, Zhiguo Wang (2020). Study on Failure Behavior of Gas Well Tubing Under CO2 Corrosion After Erosion. Journal of Failure Analysis and Prevention.DOI
151. Hongtao Liu, Yihua Dou, Lihu Cao, Yinping Cao, Yanpeng Xue (2020). Dynamic Response Analysis of Tubular String under Perforating Gun-shock Loads. Journal of Physics Conference Series.DOI
152. Lihu Cao, Yihua Dou, Kelin Wang, Shuai Xue, Hailong Geng (2020). Annular Pressure-Volume Interaction Analysis for HPHT Well Based on Multi-scale. Journal of Physics Conference Series.DOI
153. Lihu Cao, Yihua Dou, Junyan Liu, Mingfei Li, Wei Zhang (2020). Deformation Mechanism of Thin and Medium-Thickness Cylinder and Its Collapse Strength under Bending. Journal of Physics Conference Series.DOI
154. Yihua Dou, Stefan Z. Miska, Yinping Cao (2020). An Experimental Study of Whirling Motion and the Relationship between Torque and Rotary Speed for Simulated Casing Drilling. Chemistry and Technology of Fuels and Oils.DOI
155. Huifeng Liu, Wei Zhang, Yinping Cao, Yihua Dou (2020). Analysis of the Performance Improvement Effect of Combined Packing for Oil and Gas Well Packer. IOP Conference Series Earth and Environmental Science.DOI
156. Hongtao Liu, Wei Zhang, Yinping Cao, Yihua Dou (2020). Influence of FSI on the Natural Frequencies and Mode Shapes of Tubing. IOP Conference Series Earth and Environmental Science.DOI
157. Zhiguo Wan, Yihua Dou, Yuan Guan, Meng Qi, Suobin Li (2020). Dynamic Modeling of Gear System Based on 3D Finite Element Model and Its Application in Spalling Fault Analysis. Mathematical Problems in Engineering.DOI
158. Jie Zheng, Yihua Dou, Yinping Cao, Xin Yan (2020). Prediction and Analysis of Wellbore Temperature and Pressure of HTHP Gas Wells Considering Multifactor Coupling. Journal of Failure Analysis and Prevention.DOI
159. Ningsheng Zhang, Zhen Li, Lu Cui, Yihua Dou, Jiarui Cheng (2020). Difference in perforation rates of jetting tool nozzles and influencing factors. International Journal of Oil Gas and Coal Technology.DOI
160. 曹银萍，窦益华，李明飞，索红娟（2019）. 弯曲段套管的扁化变形及其对抗挤强度的影响. 《石油机械》.
161. 窦益华，韦堃，罗敬兵，王刚庆，李明飞（2019）. 水泥环缺失对水平井套管强度安全性影响分析. 《石油机械》.
162. 张杰，张良竹，李明飞，邹宁，窦益华（2019）. 新型超深井深穿透喷砂射孔工具研究与应用. 《石油机械》.
163. 曹银萍，窦益华，于洋，郭稚薇（2019）. 基于ISO 13679 B系试验载荷的特殊螺纹接头密封性能研究. 《润滑与密封》.
164. 李明飞，窦益华，曹银萍，于洋，曹亭（2019）. 考虑套管边界和液柱高压的射孔液压力脉动规律分析. 《振动与冲击》.DOI
165. 曹银萍，窦益华（2019）. 机械工程专业研究生培养体系研究. 《轻工科技》.
166. 窦益华，刘曼，郑杰，柳愿（2019）. 新型双卡瓦可退式连续油管打捞工具的设计与有限元分析. 《机械制造》.
167. 秦彦斌，姚杰，戴征宇，李明飞，窦益华（2019）. 射孔枪抗外挤强度的影响因素分析. 《石油机械》.DOI
168. 韩军，马勇，郑杰，程嘉瑞，窦益华（2019）. 煤层气自激振荡增产工具空化试验. 《石油机械》.DOI
169. 李明飞，窦益华，徐绯，刘玉雪（2019）. 高应变率载荷作用下P110S管材力学性能实验研究. 《实验力学》.
170. Zhiguo Wang, Rui Cui, Wenhai Ma, Hang Qu, Yihua Dou, Zhen Li (2019). Experimental Study on CO2 Corrosion of Super 13Cr Integrated Tubing with Erosion Damage. Journal of Failure Analysis and Prevention.DOI
171. Yinping Cao, Yihua Dou, Yuxi Huang, Jiarui Cheng (2019). Study on Vibration Characteristics of Fracturing Piping in Pump-Starting and Pump-Stopping Water Hammer. Journal of Failure Analysis and Prevention.DOI
172. Runzhou Li, Mingfei Li, Caili Song, Yihua Dou, Xaoying Yan (2019). Multidimensional Analysis Model of Perforation Optimizing Design Platform. Journal of Physics Conference Series.DOI
173. Suobin Li, Yihua Dou, Tianning Chen, Zhiguo Wan, Luyan Ju, Fan Zhang, Xiao Cui (2019). Forming Low-Frequency Complete Vibration Bandgaps in a thin Nonmetallic Elastic Metamaterial Plate. Acoustical Physics.DOI
174. Zhiguo Wang, Jun Zhang, Siamack A. Shirazi, Yihua Dou (2019). Predicting erosion in a non-Newtonian shear-thinning jet flow with validated CFD models from PIV and PTV measurements. Wear.DOI
175. Suobin Li, Yihua Dou, Tianning Chen, XU Jian-ning, Bing Li, Fan Zhang (2019). Designing a broad locally-resonant bandgap in a phononic crystals. Physics Letters A.DOI
176. Suobin Li, Yihua Dou, Tianning Chen, Zhiguo Wan, Jingjing Huang, Bing Li, Fan Zhang (2019). Evidence for complete low-frequency vibration band gaps in a thick elastic steel metamaterial plate. Modern Physics Letters B.DOI
177. Jiarui Cheng, Zhen Li, Ningsheng Zhang, Yihua Dou, Lu Cui (2019). Experimental Study on Erosion–Corrosion of TP140 Casing Steel and 13Cr Tubing Steel in Gas–Solid and Liquid–Solid Jet Flows Containing 2 wt % NaCl. Materials.DOI
178. Jiarui Cheng, Ningsheng Zhang, Liang Wei, Hongxue Mi, Yihua Dou (2019). A New Phenomenological Model for Single Particle Erosion of Plastic Materials. Materials.DOI
179. Yihua Dou, Yinping Cao, Mingfei Li, Yafei Zhang (2019). Experimental and Theoretical Study on the Mechanical Characteristics of Perforated Casings. Procedia Structural Integrity.DOI
180. Yufei Li, Yinping Cao, Yihua Dou, Yang Yu, Jiantao Zhang, Lin Zhang (2019). Simulation of Sealing Ability for Premium Connection Based on ISO 13679 CAL IV Tests. Procedia Structural Integrity.DOI
181. Yinping Cao, Yihua Dou, MingFei Li, HongJuan Suo (2019). Theoretical and Simulation Study on the Collapse Strength of a Curved Casing in Horizontal Wells. Procedia Structural Integrity.DOI
182. 李明飞，徐绯，窦益华，张卫净（2018）. 压裂工况下重复射孔套管强度安全性分析. 《石油机械》.
183. 李明飞，窦益华，曹银萍，于洋（2018）. 重复射孔套管抗外挤强度分析. 《测井技术》.
184. 章娅菲，窦益华，罗睿（2018）. 基于ZSM-5型沸石-水系统的封隔器胶筒材料密封性能研究. 《润滑与密封》.
185. Zhiguo Wang, Jun Zhang, Siamack A. Shirazi, Yihua Dou (2018). Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid. Wear.DOI
186. Jiarui Cheng, Yihua Dou, Ningsheng Zhang, Zhen Li, Zhiguo Wang (2018). A New Method for Predicting Erosion Damage of Suddenly Contracted Pipe Impacted by Particle Cluster via CFD-DEM. Materials.DOI
187. Mingfei Li, Lihu Cao, Hailong Geng, Junyan Liu, Yihua Dou (2018). An Experimental Study on Mechanical properties of P110S under Dynamic Loads. IOP Conference Series Materials Science and Engineering.DOI
188. Suobin Li, Yihua Dou, Tianning Chen, Zhiguo Wan, Zhengrong Guan (2018). A novel metal-matrix phononic crystal with a low-frequency, broad and complete, locally-resonant band gap. Modern Physics Letters B.DOI
189. Lu Cui, Zhen Li, Yihua Dou (2018). Erosion–Corrosion Behavior of 20Cr Steel in Corrosive Solid–Liquid Two-Phase Flow Conditions. Journal of Failure Analysis and Prevention.DOI
190. Jiarui Cheng, Yihua Dou, Jiding Zhang, Ningsheng Zhang, Zhen Li, Zhiguo Wang (2018). Experimental Study on Particle Erosion Failure of Abrupt Pipe Contraction in Hydraulic Fracturing. Journal of Failure Analysis and Prevention.DOI
191. Zuwen Wang, Shasha Wang, Shasha Wang, Yihua Dou, Zhiguo Wang, Zhiguo Wang (2018). Optimization of the nozzles' structure in gas well. International Forum on Energy, Environment Science and Materials (IFEESM).DOI
192. 窦益华，于凯强，杨向同，曹银萍（2017）. 输流弯管流固耦合振动有限元分析. 《机械设计与制造工程》.
193. 贺海军，韩璐，窦益华，曹银萍，曹立虎（2017）. 滚筒处连续油管疲劳寿命有限元分析. 《机械设计与制造工程》.
194. 李林涛，魏晓冬，窦益华，刘会锋（2017）. 考虑温度影响的特殊螺纹油管接头有限元分析. 《石油机械》.
195. Jie Zheng, Man Liu, Hailong Jiang, Yihua Dou (2017). Design of a self-adaptive pipe robot based on multi — axis differential system. IEEE Information Technology, Networking, Electronic and Automation Control Conference (ITNEC).DOI
196. Jiarui Cheng, Nuohao Zhang, Yinping Cao, Zhuyan Li, Yihua Dou (2017). Effect of proppant impingement on flow-induced corrosion of tubular steel super 13Cr via CFD and experiment. Egyptian Journal of Petroleum.DOI
197. Jiarui Cheng, Yinping Cao, Yihua Dou, Zhen Li (2017). Erosion of water-based fracturing fluid containing particles in a sudden contraction of horizontal pipe. Journal of Physics Conference Series.DOI
198. Jiarui Cheng, Ningsheng Zhang, Zhen Li, Yihua Dou, Yinping Cao (2017). Erosion Failure of Horizontal Pipe Reducing Wall in Power-Law Fluid Containing Particles via CFD–DEM Coupling Method. Journal of Failure Analysis and Prevention.DOI
199. Hailong Jiang, Mian Chen, Yan Jin, Yihua Dou (2017). Tensile Stress Close to a Wellbore in the High Pressure Gas Well Considering of Shear Stress.
200. Yinping Cao, Hao Li, Yihua Dou (2017). Mechanical Analysis and Safety Evaluation of Double-Packer String in a Horizontal Well.DOI
201. 窦益华，薛帅，曹银萍（2016）. 高温高压井套管多环空压力体积耦合分析. 《石油机械》.
202. 徐德奎，任虎彪，李明飞，曹银萍，窦益华（2016）. 考虑弯矩和剪切影响的造斜段套管抗挤强度分析. 《石油机械》.
203. 窦益华，马亮，李明飞，于洋（2016）. 过扭与欠扭工况下特殊螺纹油管接头三维有限元分析. 《石油矿场机械》.
204. 窦益华，闫蓉，李明飞（2016）. 基于有限元分析的高泵压压裂井射孔参数优选. 《油气井测试》.
205. 窦益华，杨浩，李明飞，曹银萍（2016）. 水力扩张式封隔器胶筒力学性能有限元分析. 《油气井测试》.
206. 南荣丽，窦益华，杨新克，王兴，曹银萍（2016）. 高温高压井完井封隔器卡瓦抗剪切强度分析. 《油气井测试》.
207. Hailong Jiang, Yihua Dou, Zhongchen Xi, Mian Chen, Yan Jin (2016). Microscopic choked flow for a highly compressible gas in porous media. Journal of Natural Gas Science and Engineering.DOI
208. Xin Sun, Yihua Dou, Heng Song, Xing Wang, Yinping Cao (2016). Analysis of the Interaction between Casing and Completion Packer Slip in HPHT Wells.DOI
209. 窦益华，王轲，于洋，曹银萍（2015）. 特殊螺纹油管接头上扣性能三维有限元分析. 《石油机械》.
210. 岳艳芳，仝少凯，窦益华（2015）. 高温高压深井射孔段套管应力理论计算与分析. 《石油机械》.
211. 刘雁蜀，秦龙，王治国，窦益华（2015）. 套管压裂过程中射孔孔眼冲蚀数值模拟. 《石油机械》.
212. 王治国，冉亚楠，隆世明，崔璐，窦益华（2015）. 水力喷射工具射孔过程液固两相流冲蚀数值模拟. 《石油机械》.
213. 窦益华，马振皓，陈家元，曹银萍（2015）. THT封隔器胶筒力学行为有限元分析. 《油气井测试》.
214. 马文海，段永刚，王治国，李臻，窦益华（2015）. P110油管钢在压裂过程中的冲蚀行为. 《钢铁研究学报》.
215. 崔璐，李臻，王建才，窦益华（2015）. 油井管的腐蚀疲劳研究进展. 《石油机械》.
216. Jiayuan Chen, Yihua Dou, Yinping Cao, Yanbin Qin (2015). Application of finite element analysis in mechanics analysis of completion packer.DOI
217. Ke Wang, Yihua Dou, Yu Yang, Yinping Cao (2015). Application of three dimensional finite element method in evaluation of seal characteristic of premium connection.DOI
218. Yihua Dou, Jinchuan Liu (2015). Safety analysis of completion tubing considering water hammer effect.DOI
219. Xiaozeng Wang, Zhan Qu, Yihua Dou, Wenhai Ma (2015). Loads of casing and cement sheath in the compressive viscoelastic salt rock. Journal of Petroleum Science and Engineering.DOI
220. Yong’an Zhao, Wenbin Cai, Lu Cui, Jiarui Cheng, Yihua Dou (2015). Erosion of Premium Connection Cross-over Joint in Solid-liquid Flow. MATEC Web of Conferences.DOI
221. 屈展，王小增，窦益华，马文海（2014）. 聚磺体系水基泥浆中套管磨损性能及磨损机理. 《热加工工艺》.
222. 李臻，程嘉瑞，杨向同，窦益华（2014）. 超级13Cr钢冲蚀数值模拟与试验研究. 《石油机械》.
223. 马文海，钱智超，李臻，王治国，窦益华（2014）. 超级13Cr油管在不同材料套管中磨损对比试验. 《石油机械》.
224. 窦益华，于晓，张福祥，杨向同（2014）. 高精度液压管钳扭矩标定仪的设计与实现. 《石油机械》.
225. 平郁才，孙支林，王鹏，贺敏，徐古林，刘丰宁，窦益华（2014）. 柱塞式注水泵技术改进与应用分析. 《石油机械》.
226. 魏少波，王新河，王小增，窦益华（2014）. 套管磨损正交试验及其影响因素的极差分析. 《石油机械》.
227. 米红学，李国亮，王小增，窦益华（2014）. 水基泥浆中P110钢级套管耐磨性能和磨损机制分析. 《润滑与密封》.
228. 窦益华，于洋，曹银萍，杨向同（2014）. 动载作用下特殊螺纹油管接头密封性对比分析. 《石油机械》.
229. 仝少凯，朱炳坤，曹银萍，窦益华（2014）. RTTS封隔器卡瓦力学性能分析. 《石油机械》.
230. 张福祥，巴旦，刘洪涛，李臻，窦益华（2014）. 压裂过程超级13Cr油管冲刷腐蚀交互作用研究. 《石油机械》.
231. 曹银萍，王小增，马文海，窦益华（2014）. 硬度对套管耐磨性能影响的实验研究. 《润滑与密封》.
232. 蔡茂佳，于洋，曹银萍，窦益华（2014）. 交变载荷作用下特殊螺纹油管接头连接强度及密封性分析. 《制造业自动化》.
233. Yihua Dou, Yafei Zhang, Jingwei Liang, Rui Chao (2014). Experimental study on application characteristics of zeolite/water stuffing for the nanofluidic packer rubber. Advances in Mechanical Engineering.DOI
234. Yihua Dou, Huanhuan Pan, Shaokai Tong, Yinping Cao, Wenxiang Gao (2014). Study on the Interaction Mechanism of Packer Slips and Thick Wall Casing. The Open Mechanical Engineering Journal.DOI
235. Yinping Cao, Shaokai Tong, Yihua Dou (2014). Analysis of Limit Setting Force of Casing Inside Slips Based on Cylindrical Shell Theory. The Open Mechanical Engineering Journal.DOI
236. 曹银萍，王小增，王新河，窦益华（2013）. 钻井液密度对高钢级套管磨损量的影响研究. 《石油机械》.
237. 王刚庆，刘旭辉，王小增，窦益华（2013）. 月牙形和偏心圆筒形内壁磨损套管应力分析. 《石油机械》.
238. 程嘉瑞，杨向同，李臻，窦益华，仝少凯（2013）. API油管接箍液固两相流体冲蚀数值模拟. 《腐蚀与防护》.
239. 陈朝晖，于洋，窦益华（2012）. 内压作用下API油管接头应力有限元分析. 《内蒙古石油化工》.
240. 许爱荣，邹云，杨向同，窦益华（2012）. 内压作用下含裂纹射孔套管临界开裂应力分析. 《石油机械》.
241. 窦益华，于洋，夏辉，曹银萍（2012）. 基于弹簧理论的螺旋弯曲管柱强度分析. 《石油机械》.
242. 窦益华，李明飞，张福祥，杨向同（2012）. 井身结构对射孔段油管柱强度安全性影响分析. 《石油机械》.
243. Yihua Dou, Jingwen Yang, Yinping Cao (2012). Analysis of Loads and Stresses of Drilling Tool in Trenchless Directional Drilling.DOI
244. Yinping Cao, Yihua Dou, Hui Xia (2012). Mechanical Analysis of Trenchless Directional Drill String in Horizontal Section and Slant Section.DOI
245. 胡华，汪艳，窦益华（2011）. 内壁磨损套管在非均匀地应力作用下的应力强度分析. 《内蒙古石油化工》.
246. Yihua Dou, Yinping Cao (2011). Mechanical Analysis of Drill Strings in Horizontal Directional Drilling.DOI
247. Yihua Dou (2011). An Analysis of Tubular Strings Buckled in Deflecting Part of Directional Wells. Inner Mongolia Petrochemical Industry.
248. Yihua Dou (2011). An Analysis of Buckling Behavior of Down-ward Bended Tubular Strings in Directional Wells. Science and Technology of West China.
249. 吕拴录，李元斌，王振彪，窦益华，韩勇，冯广庆，盛树彬，赵国仙，李江（2010）. 某高压气井13Cr油管柱泄漏和腐蚀原因分析. 《腐蚀与防护》.
250. 窦益华，杨鹏，张明友，庞东晓（2010）. 射孔测试改造联作套管强度热结构耦合分析. 《石油机械》.
251. 陶世军，刘剑辉，马建强，窦益华（2009）. 钻铤螺纹有限元分析及优化改进. 《石油机械》.
252. 姜学海，王耀峰，窦益华（2009）. 高温高压深井磨损套管应力热-结构耦合场分析. 《石油机械》.
253. 庞秉谦，杨松，窦益华，王耀锋（2009）. 套管磨损与水泥环缺陷位置对套管应力的影响. 《石油机械》.
254. 苏秀珠，窦益华，许爱荣，张浩（2008）. 高温高压深井直读试井电缆断裂原因探讨. 《2008年石油装备学术年会暨庆祝中国石油大学建校55周年学术研讨会》.
255. 黄显辉，窦益华，许爱荣，王维君（2008）. 高温高压深井射孔卡枪原因分析及对策. 《2008年石油装备学术年会暨庆祝中国石油大学建校55周年学术研讨会论文集》.
256. 窦益华，许爱荣，张福祥，张绍礼（2008）. 高温高压深井试油完井问题综述. 《2008年石油装备学术年会暨庆祝中国石油大学建校55周年学术研讨会论文集》.
257. 杨东，窦益华，许爱荣（2008）. 高温高压深井酸压封隔器失封原因及对策. 《2008年石油装备学术年会暨庆祝中国石油大学建校55周年学术研讨会论文集》.
258. 王小增，杨久红，窦益华（2008）. 套管磨损后剩余壁厚及剩余强度分析. 《石油钻探技术》.
259. Yihua Dou (2008). An Analyses for the Safety of Tubing Strings and Gas Reservoirs during Producing and Closing. Inner Mongolia Petrochemical Industry.
260. 张明友，窦益华（2007）. 影响套管磨损的因素、磨损预测及剩余强度分析. 《中国西部科技》.
261. 窦益华，张福祥，韩勇，宋延鹏（2007）. 试油作业用高强度特种油管的创新研制. 《石油机械》.
262. 窦益华，张福祥，王祖文，湛精华（2007）. 试油井下管柱载荷测试器的研制及应用. 《石油机械》.
263. 窦益华，徐海军，姜学海，朱东明（2007）. 射孔测试联作封隔器中心管损坏原因分析. 《石油机械》.
264. 张明友，姜学海，赵国仙，窦益华（2007）. H2S/CO2共存条件下油井管材及工具腐蚀试验研究. 《石油机械》.
265. 窦益华，许爱荣，张国政，刘士军（2007）. 螺纹参数公差对油管螺纹连接强度的影响分析. 《石油机械》.
266. 张明友，姜学海，赵国仙，窦益华（2007）. H 2 S/CO 2 共存条件下油井管材及工具腐蚀试验研究. 《2007年石油装备学术研讨会论文专辑》.
267. 窦益华，张福祥，王维君，张绍礼（2007）. 井下套管磨损深度及剩余强度分析. 《石油钻采工艺》.
268. 窦益华，姜学海，张福祥（2007）. 高密度钻井液润滑下套管磨损实验研究. 《润滑与密封》.
269. Yihua Dou (2007). Analysis of Buckling Configuration and Restraint Forces of Tubular Strings Sealed in Parkers. Oil Field Equipment.
270. Yihua Dou (2007). The Major Factors Influencing the Casing Wear During Drilling. Inner Mongolia Petrochemical Industry.
271. Yihua Dou (2007). Mechanical Analysis of Compressed Parking during Axial Compressing. Oil Field Equipment.
272. Yihua Dou (2007). Principle Design of Meters for Measuring Loads on down Hole Tubular String during Well Testing. Inner Mongolia Petrochemical Industry.
273. Yihua Dou (2007). Improved Compressible Parker Used in Open Hole Testing. Oil Field Equipment.
274. Yihua Dou (2007). The Worn Casing Collapse Strength Calculate. Oil Field Equipment.
275. 窦益华，贾连璧，郑跃辉，陈兴武，朱东明（1998）. 油管内壁损伤检测及评判方法. 《石油机械》.
276. 窦益华，唐俊才（1987）. 加权残值法分折埋地L型水平管段的升温载荷. 《油气储运》.

书籍章节

1. Yinping Cao, Stefan Z. Miska, Yihua Dou (2018). Theoretical Modeling and Experimental Study of the Whirling Motion of Casing Drilling. Springer series in geomechanics and geoengineering.DOI