成国光

期刊论文

1. 李刚，俞杰，李尧，李世健，成国光（2026）. 含Ca汽车用结构钢中复合夹杂物的特征和形成机理. 《中国冶金》.DOI
2. 安金敏，赵浩恩，薛伟江，眭志松，李尧，成国光（2026）. 汽车用含硫齿轮钢超声探伤缺陷形成原因分析. 《中国冶金》.DOI
3. 彭峰，成国光，王冠博，邓峰，代卫星，冯波，王启明，胡月霞（2026）. 不锈钢连铸单流中间包充型及稳态浇铸过程的优化. 《连铸》.
4. 杨新龙，张涛，赵健，陈粤，成国光，陈兴润，潘吉祥（2026）. 冷却速率和氮含量对高锰无磁钢中AlN夹杂物析出和长大行为的影响. 《特殊钢》.DOI
5. 张国磊，王意平，刘志龙，邱免，成国光，乔通（2026）. 某42CrMo4风机主轴锻件超声检测不合格的成因分析. 《大型铸锻件》.DOI
6. Jian Zhao, Jin-long Lu, Guoguang Cheng, Xiangwang Wang, Hu Long, Zhong-Zhong Xun (2026). Characteristics of Inclusions During the Refining of 48 MnV Crankshaft Steel and Thermodynamic Design of Slag Composition for High Cleanliness. Steel Research International.DOI
7. Yun-Tian Zhang, Guoguang Cheng, Daohua Bao, Tong Qiao, Wei-Xing Dai, Bo Feng, Wei Huang, Tao Zhang (2026). The Effect of Ce Content on NbC precipitate in S30432 Austenitic Heat-Resistant Steel. Metallurgical and Materials Transactions B.DOI
8. Hao Zhao, Guoguang Cheng, Yun-Tian Zhang, Jinmin An, Wei-Jian Xue, Zhi-Song Sui, Yao Li (2026). Characteristics and Formation Mechanism of Oxide-Sulfide Complex Inclusions in Non-Ca-Treated Automotive Gear Steel. Metallurgical and Materials Transactions B.DOI
9. Haoen Zhao, Guoguang Cheng, Jinmin An, Weijiang Xue, Zhisong Sui, Yao LI (2026). Failure analysis and process optimization of ultrasonic testing defects in 20MnCrS5 automotive gear steel. Engineering Failure Analysis.DOI
10. 赵浩恩，成国光，鲍道华，周孟杰，张涛（2025）. 2507双相不锈钢中铝含量对氧含量及夹杂物的影响. 《钢铁研究学报》.DOI
11. 张国磊，郭云飞，韩鹏，张重阳，成国光，张涛（2025）. GCr15SiMn轴承钢钢液高洁净化的实验室研究：Al含量的影响. 《钢铁研究学报》.
12. 杨新龙，张涛，赵健，成国光，李璟宇，陈兴润，潘吉祥（2025）. 高锰无磁钢精炼过程中含钙夹杂物的演变. 《中国冶金》.DOI
13. 邓峰，成国光，李尧，彭峰（2025）. 20MnCrS5齿轮坯表面亮线缺陷特征及形成机制. 《钢铁》.DOI
14. 黄宇，韩玉梅，成国光，肖丙政（2025）. 稀土Ce对430铁素体不锈钢等轴晶率的影响机理. 《特殊钢》.DOI
15. 张云天，成国光，张涛，王涵（2025）. DD10母合金真空熔炼过程中的脱氧研究. 《稀有金属》.
16. 王涵，成国光，张涛，张云天（2025）. 浇注温度对DD10母合金微观偏析及碳化物的影响. 《稀有金属》.DOI
17. 张国磊，郭云飞，邱免，陈刚，成国光，张涛（2025）. 精炼渣碱度对GCr15SiMn轴承钢钢液洁净度的影响. 《特殊钢》.DOI
18. Jian Zhao, Jin-long Lu, Guoguang Cheng, Tao Zhang, Daohua Bao, Guan-Bo Wang, Hu Long, Chenghong Zhou, Zhong-Zhong Xun (2025). Formation Mechanism of Near‐Surface Defects in Crankshaft Induced by Chain‐Like Al2O3 Inclusions. Steel Research International.DOI
19. Daohua Bao, Guoguang Cheng, Jinwen Zhang, Zhixiang Wang, Wei Li, Songwei Wang (2025). Composition Characteristics and Control Methods of Al2O3 − CaO + (Mn,Ca)S Complex Inclusions in D2 High-Speed Railway Wheel Steel. Metallurgical and Materials Transactions B.DOI
20. Jian Zhao, Jin-long Lu, Guoguang Cheng, Tao Zhang, Guan-Bo Wang, Hu Long, Zhong-Zhong Xun (2025). Formation Mechanism of Chain-Like CaO–Al2O3–SiO2–MgO Large-Size Inclusions on the Surface of Crankshaft. Metallurgical and Materials Transactions B.DOI
21. Guanbo Wang, Guoguang Cheng, Yanling Zhang, Lie Chen, Lei Hui, Qiang Wang, Honghan Cai (2025). Characteristics of Single, Large-Sized, Spherical D-Type Inclusions in Ultra-High Clean Bearing Steel. Metallurgical and Materials Transactions B.DOI
22. 黄宇，肖丙政，彭学艺，邓伟，成国光（2024）. 残余Ti含量对H13钢中一次碳化物特征的影响. 《金属功能材料》.
23. 刘晓峰，申文君，陈露涛，成国光（2024）. Q355B钢精炼过程中非金属夹杂物的演变及分析. 《连铸》.
24. 鲍道华，成国光，张锦文，王之香，李伟，李尧，张涛（2024）. 钙处理对DZ2高速铁路车轴钢中夹杂物的影响. 《钢铁》.
25. 乔通，成国光，张延玲，张涛，鲍道华，周孟杰，代卫星，王启明，丁斌华（2024）. 2205双相不锈钢无缝管压弯试验失效原因分析. 《2024年（第四届）中国不锈钢科技发展论坛》.
26. 周孟杰，乔通，成国光，张涛，赵浩恩，代卫星，王启明，何伟海（2024）. NO8810耐蚀合金冶炼过程中夹杂物形成机理. 《钢铁》.
27. 鲍道华，成国光，陈兴润，乔通，潘吉祥（2024）. 2507双相不锈钢板材表面起皮缺陷的形成机理及控制. 《2024年（第四届）中国不锈钢科技发展论坛》.
28. 乔通，张延玲，成国光，张涛，周孟杰，代卫星，王启明，丁斌华（2024）. 超级304不锈钢棒材中大尺寸CaO-SiO 2 -CaF 2 -Al 2 O 3 -MgO复合夹杂物形成机理. 《2024年（第四届）中国不锈钢科技发展论坛》.
29. 张涛，成国光，张延玲，乔通，周孟杰，代卫星，王启明，丁斌华（2024）. 含铌超级奥氏体不锈钢中凝固组织对铌化物的影响. 《2024年（第四届）中国不锈钢科技发展论坛》.DOI
30. 鲍道华，成国光，张锦文，王之香，李伟，李尧，张涛（2024）. 高速铁路车轮钢中大尺寸CaO-Al2O3-SiO2类夹杂物的形成机理. 《中国冶金》.
31. 俞杰，申文君，李占春，李义龙，张云天，成国光（2024）. 风电齿轮钢超声探伤缺陷的形成原因分析. 《中国冶金》.
32. Daohua Bao, Guoguang Cheng, Jinwen Zhang, Zhixiang Wang, Wei Li, Yao Li, Tao Zhang (2024). Characteristics and Formation Mechanism of Oxide–Sulfide Complex Inclusions in High-Speed Railway Wheel Steel. Metallurgical and Materials Transactions B.DOI
33. Tao Zhang, Hu Long, Guoguang Cheng, Junyu Guo, Zhongyu Lei, Zhong-Zhong Xun (2024). Cause of bending fracture in high-strength fasteners and heredity of surface recarburization in high carbon steel. Engineering Failure Analysis.DOI
34. Daohua Bao, Guoguang Cheng, Jinwen Zhang, Zhixiang Wang, Wei Li, Yao Li, Tao Zhang (2024). Characteristics, Formation Mechanism, and Removal of Large‐Sized CaO–Al2O3–SiO2 Inclusions in D2 High‐Speed Railway Wheel Steel. Steel Research International.DOI
35. Tao Zhang, Hu Long, Guoguang Cheng, Junyu Guo, Zhongyu Lei, Zhong-Zhong Xun (2024). Harmful Effects, Origin, and Control of Banded Structures in Electroplated Fasteners of High‐Carbon Steel. Steel Research International.DOI
36. Yao Li, Guoguang Cheng, Jin-long Lu, Hu Long (2024). Characteristics and Formation Mechanism of Ca–Mg–Al–Si–O + (Ca,Mn)S Duplex Inclusions in Ca–S Free-Cutting Steel. Metals and Materials International.DOI
37. Wenjun Shen, Guoguang Cheng, Chuangju Zhang, Shisong Pan (2024). Effect of charging temperature of continuous casting slab on the surface cracks of HSLA steel thick plate. Engineering Failure Analysis.DOI
38. Tong Qiao, Yu Huang, Guoguang Cheng, Guanbo Wang, Yao Li, Daohua Bao, Yanling Zhang (2024). Formation and removal mechanism of SiO 2 -MnO-Al 2 O 3 inclusions in Al-killed 42CrMo4 wind turbine bearing steel forgings. Ironmaking & Steelmaking Processes Products and Applications.DOI
39. Tong Qiao, Yanling Zhang, Guoguang Cheng, Weixing Dai, Qiming Wang, Hui Yu Yang, Genbao Chen (2024). Formation mechanism of large-sized CaO-SiO 2 -CaF 2 -Al 2 O 3 -MgO composite inclusions in super 304H stainless steel rods. Ironmaking & Steelmaking Processes Products and Applications.DOI
40. Guanbo Wang, Guoguang Cheng, Yanling Zhang, Lie Chen, Lei Hui, Qiang Wang, Honghan Cai (2024). Numerical and Physical Simulation of Mixing Process in Argon-Stirred Ladles with Single and Dual Bottom Injection. JOM.DOI
41. Wenjun Shen, Guoguang Cheng, Chuangju Zhang, Shisong Pan, Lin Dai, Xiaofeng Liu (2024). Formation cause and oxidation behaviour of surface crack on the hot-rolled thick plate of high strength low alloy steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
42. Wenjun Shen, Guoguang Cheng, Chuangju Zhang, Shisong Pan (2024). Formation, Deformation and Oxidation Behavior of Small-Sized and Irregular-Morphological Surface Crack on the Hot-Rolled Thick Plate of HSLA Steel. Iron & Steel Technology Conference and Exposition (AISTech).DOI
43. Tong Qiao, Binhua Ding, Weixing Dai, Qiming Wang, Guoguang Cheng, Yanling Zhang, Yuan Gao (2024). Analysis of the failure causes in the flattening test of 2205 duplex stainless steel seamless tubes. Engineering Failure Analysis.DOI
44. Weifeng Zhang, Yanling Zhang, Guoguang Cheng, Guanbo Wang, Tong Qiao, Ruxing Shi (2024). Formation mechanism of inspection defects in hundred-ton class 55NiCrMoV7 die steel forging. Ironmaking & Steelmaking Processes Products and Applications.DOI
45. Guolei Zhang, Guoguang Cheng, Tao Zhang, Hongsheng Miao, Xu Zhang (2024). Evolution of oxide inclusions and cleanliness control in Al-killed GCr15SiMn bearing steel during secondary refining process. Ironmaking & Steelmaking Processes Products and Applications.DOI
46. Xingrun Chen, Guoguang Cheng, Jing Guo, Jixiang Pan (2024). Transformation of inclusions in S32101 duplex stainless steel during continuous casting. Metallurgical Research & Technology.DOI
47. 王启明，成国光（2023）. TP321不锈钢管探伤夹杂物确认与形成机理. 《2023年（第三届）中国不锈钢科技发展论坛》.
48. 张创举，申文君，潘时松，梁锋，杨华，成国光（2023）. Q355热轧板山峰状表面裂纹形貌特征和形成原因. 《中国冶金》.
49. 李优梅，成国光，苗志奇，代卫星，任清学，舒友亮（2023）. 六流对称中间包结构优化及死区体积模型. 《连铸》.
50. 孙蓉蓉，姚美意，王皓瑜，张文怀，胡丽娟，仇云龙，林晓冬，谢耀平，杨健，董建新，成国光（2023）. Fe22Cr5Al3Mo-xY合金在模拟LOCA下的高温蒸汽氧化行为. 《金属学报》.
51. 刘晓峰，申文君，张创举，潘时松，戴林，成国光（2023）. Q355热轧厚板的Z向拉伸层状撕裂缺陷分析. 《连铸》.
52. 张友祺，成国光，李尧，陈粤（2023）. 国内外钙处理含硫钢中硫化物的特征和分布. 《中国冶金》.
53. 陈兴润，成国光，乔通，鲍道华，钱张信，潘吉祥（2023）. 2507超级双相不锈钢板坯修磨过程脆断分析及控制. 《中国冶金》.
54. 詹中华，张延玲，石如星，成国光（2023）. 15-5PH不锈钢中DS类夹杂物形成机理及控制研究. 《2023年（第三届）中国不锈钢科技发展论坛论文集》.DOI
55. 陈粤，成国光，张涛，张友祺，龙鹄，郭俊宇（2023）. 45钢中CaO-SiO2-Al2O3-MgO系夹杂物的塑性化控制. 《炼钢》.
56. 苗志奇，成国光，李世健，任振海，徐必靖（2023）. 37Mn5钢精炼过程大尺寸Al2O3-SiO2-MnO类夹杂物形成与演变机理. 《炼钢》.
57. 乔通，代卫星，成国光，张延玲，杨辉，陈根保，丁斌华（2023）. 高质量304不锈钢棒材中大尺寸夹杂物的特征与分析. 《2023年（第三届）中国不锈钢科技发展论坛》.
58. Guan-Bo Wang, Yanling Zhang, Guoguang Cheng, Zhong-Zhong Xun, C. Deng, Hu Long (2023). Behavior of residual Zn oxides in metallized pellets applied in the converter steelmaking process. Journal of Materials Research and Technology.DOI
59. Shijian Li, Liu-Yu Zhang, Gaowei Qian, Zhan-Chun Li, Yi-Long Li, Guoguang Cheng (2023). Formation Mechanism and Control of Large-size CaO–MgO–Al2O3 Inclusions in Steel Used for Wind Power. ISIJ International.DOI
60. Daohua Bao, Guoguang Cheng, Yu Huang (2023). As-Cast Grain Refinement of H13 Steel by Cerium Sulfide Formed During Solidification. Metallurgical and Materials Transactions B.DOI
61. Yao Li, Guoguang Cheng, Jin-long Lu, Hu Long (2023). Characteristics of Sulfides in Commercial Ca-Treated Resulfurized Steel With Different Deoxidation Modes. Metallurgical and Materials Transactions B.DOI
62. Xing-Run Chen, Tong Qiao, Guoguang Cheng, Daohua Bao, Ji-Xiang Pan (2023). Sigma‐Phase Distribution in 2507 Super Duplex Stainless Steel Continuous Casting Slabs. Steel Research International.DOI
63. Guanbo Wang, Guoguang Cheng, Yanling Zhang, Qiang Ruan, Jixiang Pan, Xingrun Chen (2023). A Dynamic Decarburization Model in Vacuum Oxygen Decarburization Process for Ultrapure Ferritic Stainless Steel. steel research international.DOI
64. Jiachen Pang, Guoyu Qian, Sheng Pang, Wenhui Ma, Guoguang Cheng (2023). Design of a submerged entry nozzle for optimizing continuous casting of stainless steel slab. Journal of Iron and Steel Research International.DOI
65. Tao Zhang, Hu Long, Guoguang Cheng, Junyu Guo, Zhongyu Lei, Zhongzhong Xun (2023). Cause of Bending Fracture and Control of Inclusions in High-strength Fasteners Made of Al-bearing High Carbon Steel. ISIJ International.DOI
66. Yao Li, Guoguang Cheng, Jinlong Lu, Hu Long (2023). Growth Behavior of MnS on CaO–MgO–Al2O3 Oxide in Al-killed Ca-treated Resulfurized Steel. ISIJ International.DOI
67. Weifeng Zhang, Guanbo Wang, Yanling Zhang, Guoguang Cheng, Guolei Zhang (2023). A mathematical model for dehydrogenation of molten steel in the Vacuum degasser. Vacuum.DOI
68. Yanling Zhang, Guoguang Cheng, Zhonghua Zhan (2023). Inclusion Metallurgy. Metals.DOI
69. Guolei Zhang, Guoguang Cheng, Yu Huang, Yunpeng Wang, Wenjun Shen, Hongsheng Miao, Xu Zhang, Chengwen Yuan (2023). Formation and Control of Large Oxide Inclusions at the Spot-Segregation Defects of Al-Killed GCr15SiMn Ingots. Metallurgical and Materials Transactions B.DOI
70. Zhonghua Zhan, Guanbo Wang, Ruxing Shi, Weifeng Zhang, Yanling Zhang, Guoguang Cheng (2023). Inclusion Control of 15-5 PH High-strength Stainless Steel through Aluminum Deoxidation. ISIJ International.DOI
71. Zhonghua Zhan, Yanling Zhang, Ruxing Shi, Tong Qiao, Guanbo Wang, Guoguang Cheng (2023). Effect of Slag Basicity on Non-Metallic Inclusions and Cleanliness of 15-5PH Stainless Steel. Metals.DOI
72. Wenjun Shen, Guoguang Cheng, Chuangju Zhang, Shisong Pan, Lin Dai, Xiaofeng Liu (2023). Cause Analysis of Low Tensile Plasticity in Normal Direction for Hot‐Rolled Thick Plate of HSLA Steel. steel research international.DOI
73. Daohua Bao, Guoguang Cheng, Yu Huang, Tong Qiao (2023). Effect of Rare Earth Ce on the Solidification Structure of Fe–18Cr–0.8Si Ferritic Stainless Steel. Metallurgical and Materials Transactions B.DOI
74. 高茗，于浩，成国光，张延玲（2022）. 熔融金属/熔渣-氧化物高温润湿行为实验研究. 《实验技术与管理》.
75. 鲁金龙，成国光，丘文生，龙鹄，刘春林（2022）. 中碳高硫易切削钢中Zr添加对MnS夹杂物形貌特征的影响. 《钢铁研究学报》.
76. 李雨倩，陈超，成国光，王天扬，李林博，耿梦姣，范晋平（2022）. 中间包水模型数据的流出百分比分析方法. 《过程工程学报》.
77. 孙蓉蓉，姚美意，林晓冬，张文怀，仇云龙，胡丽娟，谢耀平，杨健，董建新，成国光（2022）. 添加Ti对Fe22Cr5Al3Mo合金在500℃过热蒸汽中腐蚀行为的影响. 《金属学报》.
78. 卢春光，张国磊，成国光，苗红生，张旭（2022）. GCr15SiMn轴承钢中大尺寸TiN生成与控制. 《钢铁》.
79. 张威风，石如星，张延玲，王冠博，成国光，王鹏飞（2022）. Cr5大型锻钢轧辊探伤缺陷的形成机理及控制. 《钢铁》.
80. 鲁金龙，丘文生，成国光，龙鹄，李尧（2022）. 含Ca汽车控制臂用钢中复合硫化物控制机理. 《钢铁》.
81. 詹欣林，成国光，申文君，李尧，刘俊江，郑宏光（2022）. SCM420连铸坯热送过程MnS-AlN复合相的析出行为. 《中国冶金》.
82. 左晓剑，张涛，成国光（2022）. GCr15SiMn轴承钢铸锭的原位统计分布分析. 《冶金分析》.
83. 张国磊，成国光，代卫星，张旭，姜新岩（2022）. 真空条件下钢液脱气过程的模拟研究. 《工程科学学报》.
84. 乔通，成国光，黄宇，李占春，鲍道华（2022）. 42CrMo4钢中CaO-MgO-Al2O3夹杂物形成机理的研究. 《江西冶金》.
85. Xin Ouyang, Wanming Lin, Yanzhao Luo, Yuxing Zhang, Jinping Fan, Chao Chen, Guoguang Cheng (2022). Effect of Salt Tracer Dosages on the Mixing Process in the Water Model of a Single Snorkel Refining Furnace. Metals.DOI
86. Zhiqi Miao, Guoguang Cheng, Shijian Li, Yunpeng Wang, Weixing Dai, WenWen Du (2022). Slag optimization to control CaO increase in inclusions during vacuum degassing of high carbon chromium-bearing steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
87. Wenjun Shen, Guoguang Cheng, Yuyang Hou, Yao Li, Xinlin Zhan, Junjiang Liu, H. G. Zheng (2022). Effects of the Cooling Rate and Recovery Temperature on the Growth of AlN Precipitates in Gear Steel. steel research international.DOI
88. Wenjun Shen, Guoguang Cheng, Guanbo Wang (2022). Formation and Deformation Mechanism of Mountain‐Like Surface Crack on the Hot‐Rolled Thick Plate of HSLA Steel. steel research international.DOI
89. Tao Zhang, Yue Chen, Guoguang Cheng, Xinlong Yang, Xingrun Chen, Jixiang Pan, Yu Huang, Qiming Wang (2022). Effect of Cooling Rate and High N Content on the Precipitation and Growth of AlN Inclusions in Fe–23Mn–2Al–0.08 V High‐Manganese Nonmagnetic Steel. steel research international.DOI
90. Tong Qiao, Guoguang Cheng, Yu Huang, Yao Li, Yanling Zhang, Zhanchun Li (2022). Formation and Removal Mechanism of Nonmetallic Inclusions in 42CrMo4 Steel during the Steelmaking Process. Metals.DOI
91. Yao Li, Guoguang Cheng, Jinlong Lu, Hu Long (2022). Characteristics and Formation Mechanism of Duplex (Ca,Mn)S Inclusions in Commercial Ca-Treated Resulfurized Steel. Metals and Materials International.DOI
92. Yao Li, Guoguang Cheng, Jinlong Lu, Jun Sun (2022). Characteristics and Formation Mechanism of Complex TiN Inclusions in 20CrMnTi Gear Steel. ISIJ International.DOI
93. Tao Zhang, Guoguang Cheng, Xinlong Yang, Xingrun Chen, Jixiang Pan, Jingyu Li, Yu Huang, Shijian Li (2022). Evolution mechanism of Ca-containing inclusions in 20Mn23AlV high-manganese non-magnetic steel during the refining process. Ironmaking & Steelmaking Processes Products and Applications.DOI
94. Yao Li, Guoguang Cheng, Jinlong Lu, Jun Sun (2022). The effect of TiN precipitated particles on the austenite grain and hardenability of 20CrMnTi gear steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
95. Guolei Zhang, Guoguang Cheng, Yunpeng Wang, Xu Zhang, Biao Tan, Chengwen Yuan, Hongsheng Miao (2022). A thermodynamic model of the titanium distribution behaviour between slag and molten steel during LF refining process: description and application. Ironmaking & Steelmaking Processes Products and Applications.DOI
96. Yuyang Hou, Guoguang Cheng, Kota Kadoi, Hiroshige Inoue, Qiang Ruan, Jixiang Pan, Xingrun Chen (2022). Formation Mechanism of Stripe Pattern Defect in Cold-Rolled AISI 441 Stainless Steel Stabilized by Ti and Nb. Metallurgical and Materials Transactions B.DOI
97. Yuyang Hou, Guoguang Cheng, Kota Kadoi, Hiroshige Inoue (2022). Acceleration mechanism of Ti2O3 on TiN formation and δ-ferrite nucleation of ferritic stainless steel. Journal of Alloys and Compounds.DOI
98. Weifeng Zhang, Guanbo Wang, Yanling Zhang, Guoguang Cheng, Zhonghua Zhan (2022). Formation Mechanism and Improvement of Magnetic Particle Inspection Defects in Cr5 Backup Roller Forged Ingot. Metals.DOI
99. Zhiqi Miao, Hu Long, Guoguang Cheng, Wensheng Qiu, Shoujun Zhong, Dahua Yu (2022). Agglomeration and Clustering of CaO-Al2O3-MgO Leading to Super Large-Size Line-Shape Inclusions in High Carbon Chromium Bearing Steel. Metallurgical and Materials Transactions B.DOI
100. 王启明，成国光（2021）. 含Ti不锈钢冶金工艺进展. 《工程科学学报》.DOI
101. 乔通，黄宇，成国光，鲍道华，代卫星（2021）. 2507双相不锈钢热轧板表面起皮缺陷的特征及成因分析. 《钢铁研究学报》.DOI
102. 詹中华，张延玲，成国光，张威风（2021）. 15-5PH不锈钢大型锻件冶炼脱氧工艺研究. 《钢铁研究学报》.DOI
103. 李尧，成国光，鲁金龙，孙军，黄宇（2021）. 20CrMnTi齿轮钢中TiN析出相对淬透性的影响. 《钢铁》.DOI
104. 王启明，成国光，李璟宇，窦文哲，胡学文（2021）. 核电用CF8A不锈钢大型铸件表面探伤缺陷的成因及控制. 《钢铁研究学报》.
105. 侯雨阳，成国光（2021）. 铁素体不锈钢铸坯凝固特性及等轴晶率控制. 《连铸》.DOI
106. 鲍道华，黄宇，成国光，乔通，代卫星（2021）. Ce含量对H13钢中稀土夹杂物析出行为的影响. 《钢铁研究学报》.DOI
107. 任振海，黄宇，成国光，徐必靖，陈占领，王冠博（2021）. Ti元素对H13模具钢中一次碳化物的影响. 《江西冶金》.DOI
108. 万文华，李世健，成国光，任振海，徐必靖，苗志奇（2021）. 37Mn5钢中宏观大尺寸夹杂物形成机理及控制. 《江西冶金》.DOI
109. Rongrong Sun, Meiyi Yao, Jie Zhang, Haoyu Wang, Xiaodong Lin, Wenhuai Zhang, Yunlong Qiu, Jian Yang, Guoguang Cheng, Jianxin Dong (2021). Effect of Y on the corrosion behavior of Fe22Cr5Al3Mo alloy in 500 ℃ super-heated steam. Corrosion Science.DOI
110. Xingrun Chen, Guoguang Cheng, Yuyang Hou (2021). Effects of titanium content on the large precipitates in 443 ultra-pure ferritic stainless steel. Canadian Metallurgical Quarterly.DOI
111. Daohua Bao, Guoguang Cheng, Yu Huang, Tong Qiao, Weixing Dai (2021). Refinement of Solidification Structure of H13 Steel by Rare Earth Sulfide. steel research international.DOI
112. Wenhuai Zhang, Yue Hong Qian, Rongrong Sun, Xiaodong Lin, Meiyi Yao, Yunlong Qiu, Jian Yang, Guoguang Cheng, Jianxin Dong (2021). Oxidation characteristics of Fe22Cr5Al3Mo-xNb alloys in high temperature steam. Corrosion Science.DOI
113. Zhonghua Zhan, Weifeng Zhang, Yanling Zhang, Ruxing Shi, Guoguang Cheng (2021). Formation and Evolution of DS-Type Inclusions in 15-5PH Stainless Steel. Metals.DOI
114. Dekun Liu, Jian Yang, Yinhui Zhang, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2021). Effect of Welding Heat Input on the Microstructure and Impact Toughness of HAZ in 420 MPa-Grade Offshore Engineering Steel. Frontiers in Materials.DOI
115. Zhiqi Miao, Guoguang Cheng, Shijian Li, Wensheng Qiu, Lingyu Zeng, Hu Long (2021). Formation Mechanism of Large-size CaO–Al2O3–MgO–SiO2 Inclusions in High Carbon Chromium Bearing Steel. ISIJ International.DOI
116. Yunpeng Wang, Guoguang Cheng, Shijian Li, Weixing Dai, Dajun Shang, Chunguang Lu (2021). A Novel Model to Design the Equilibrium Slag Compositions for Bearing Steel: Verification and Application. ISIJ International.DOI
117. Yu Ting Huang, Guoguang Cheng, Meiting Zhu, Shijian Li, Weixing Dai (2021). Effect of Nb Content on the Behavior of Primary Carbides in 0.4C-5Cr-1.2Mo-1V Steel. ISIJ International.DOI
118. Yu Huang, Guoguang Cheng, Meiting Zhu, Weixing Dai (2021). Effect of Cerium on the Behavior of Primary Carbides in Cast H13 Steels. Metallurgical and Materials Transactions B.DOI
119. 王冠博，成国光，李璟宇，阮强，潘吉祥，陈兴润（2020）. 超纯铁素体不锈钢VOD脱碳模型研究. 《钢铁研究学报》.DOI
120. 钱月，孙蓉蓉，张文怀，姚美意，张金龙，周邦新，仇云龙，杨健，成国光，董建新（2020）. Nb对Fe22Cr5Al3Mo合金显微组织和耐腐蚀性能的影响. 《金属学报》.
121. 张涛，成国光，侯雨阳（2020）. 过热度对GCr15SiMn轴承钢钢锭宏观偏析的影响. 《中国冶金》.DOI
122. 曹小军，李明林，黄宇，成国光，代卫星，谢有（2020）. Nb-H13钢中一次碳化物的析出机理和控制. 《中国冶金》.DOI
123. 车巨龙，鲜奋强，窦亚斌，鲁金龙，成国光（2020）. 非调质钢中MnS分布对轧材横向塑性的影响. 《中国冶金》.DOI
124. 龙鹄，成国光，丘文生，曾令宇，余大华，刘栋（2020）. 轴承钢中大尺寸夹杂物的特征、来源及改进工艺. 《中国冶金》.DOI
125. 黄宇，成国光，王启明，窦文哲，胡学文（2020）. 大尺寸夹杂物对12MDV6铸件冲击性能的影响. 《中国冶金》.DOI
126. 申文君，成国光，侯雨阳（2020）. 国内外2205双相钢连铸坯凝固组织及碳偏析分析. 《中国冶金》.DOI
127. 李尧，成国光，鲁金龙，孙军（2020）. 20CrMnTi齿轮钢中TiN夹杂物的特征与分布. 《中国冶金》.DOI
128. 黄宇，成国光，鲍道华（2020）. H13钢中一次碳化物的特征及控制进展. 《工程科学学报》.
129. Xiaoqian Pan, Jian Yang, Qingdong Zhong, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2020). Effects of coarse particles, prior austenite grains, and microstructures on impact toughness in heat-affected zone of Mg deoxidation steel plates without or with Al addition. Ironmaking & Steelmaking Processes Products and Applications.DOI
130. Guolei Zhang, Guoguang Cheng, Weixing Dai, Yu Huang, Qiming Wang (2020). Study on dehydrogenation behaviour of molten steel in single snorkel refining furnace (SSRF) by a mathematical model. Ironmaking & Steelmaking Processes Products and Applications.DOI
131. Xingrun Chen, Guoguang Cheng, Yuyang Hou, Jingyu Li, Jixiang Pan (2020). Influence of refining process and utilization of different slags on inclusions, titanium yield and total oxygen content of Ti-stabilized 321 stainless steel. Journal of Iron and Steel Research International.DOI
132. Yu Huang, Guoguang Cheng, Meiting Zhu (2020). Effect of Ti Content on the Behavior of Primary Carbides in H13 Ingots. Metals.DOI
133. Qiming Wang, Guoguang Cheng, Yuyang Hou (2020). Effect of Titanium Addition on As-Cast Structure and High-Temperature Tensile Property of 20Cr-8Ni Stainless Steel for Heavy Castings. Metals.DOI
134. Shijian Li, Guoguang Cheng, Yu Huang, Weixing Dai, Zhiqi Miao (2020). Mathematical model for design of optimized multi-component slag for electroslag remelting. Journal of Iron and Steel Research International.DOI
135. Yu Huang, Guoguang Cheng, Shijian Li, Weixing Dai (2020). Distribution Characteristics and Thermal Stability of Primary Carbide in Cast Ce-H13 Steel. ISIJ International.DOI
136. Weixing Dai, Guoguang Cheng, Guolei Zhang, Zhidong Huo, Peixian Lv, Yunlong Qiu, Weifei Zhu (2020). Investigation of Circulation Flow and Slag-Metal Behavior in an Industrial Single Snorkel Refining Furnace (SSRF): Application to Desulfurization. Metallurgical and Materials Transactions B.DOI
137. Yuyang Hou, Guoguang Cheng, Huijing Cheng (2020). Effect of Oxide Composition on the Orientation Relationship and Disregistry in Complex Nucleus of Ti and Nb Stabilized Ferritic Stainless Steel Revealed by EBSD Measurement. Metallurgical and Materials Transactions B.DOI
138. Siwei Wu, Jian Yang, Guangming Cao, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2020). Elevating Prediction Performance for Mechanical Properties of Hot-Rolled Strips by Using Semi-Supervised Regression and Deep Learning. IEEE Access.DOI
139. 黄宇，成国光，李世健，代卫星（2019）. Ce微合金化H13钢中一次碳化物的析出机理及热稳定性研究. 《金属学报》.
140. 李璟宇，成国光，陈兴润，潘吉祥，阮强（2019）. 含钛超纯铁素体不锈钢水口结瘤机制研究. 《连铸》.DOI
141. 张涛，成国光，侯雨阳，王云鹏（2019）. GCr15SiMn轴承钢中碳元素偏析与疏松的相关性. 《中国冶金》.DOI
142. 侯雨阳，成国光，阮强，潘吉祥，陈兴润（2019）. 436L超纯铁素体不锈钢冷轧板表面带状色差形成机理. 《2019年（首届）中国金属学会不锈钢科技发展论坛》.DOI
143. 黄宇，成国光，杨洪根，代卫星，李世健（2019）. 硼铬微合金钢的脆性断裂失效分析. 《中国冶金》.DOI
144. 李璟宇，成国光，李六一，胡斌，徐昌松，王贵民（2019）. 202不锈钢中非金属夹杂物的形成机理. 《工程科学学报》.
145. 陈兴润，成国光，惠恺，潘吉祥，李璟宇（2019）. 2205双相不锈钢连铸过程中夹杂物的形成机制. 《钢铁研究学报》.DOI
146. 宋晨，李璟宇，成国光，李六一，向阳，胡斌（2019）. Cr18Mn6Ni4N奥氏体不锈钢连铸坯热塑性及其影响机制. 《连铸》.DOI
147. Jingyu Li, Guoguang Cheng, Qiang Ruan, Jixiang Pan, Xingrun Chen (2019). Optimization of AISI 443 Stainless Steel Cleanness during Secondary Steelmaking Process. steel research international.DOI
148. Yinhui Zhang, Jian Yang, Longyun Xu, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong (2019). The Effect of Ca Content on the Formation Behavior of Inclusions in the Heat Affected Zone of Thick High-Strength Low-Alloy Steel Plates after Large Heat Input Weldings. Metals.DOI
149. Qiming Wang, Guoguang Cheng, Jingyu Li, Wenzhe Dou, Xuewen Hu (2019). Formation Mechanism of Large Inclusions in 80t 20Cr–8Ni Stainless Steel Casting for Nuclear Power. steel research international.DOI
150. Jingyu Li, Guoguang Cheng (2019). Hot ductility of Cr15Mn7Ni4N austenitic stainless steel slab. Journal of Materials Research and Technology.DOI
151. Jinlong Lu, Guoguang Cheng, Menghuai Wu, Guo Xiao Yang, Julong Che (2019). Detection and analysis of magnetic particle testing defects on heavy truck crankshaft manufactured by microalloyed medium-carbon forging steel. Journal of Iron and Steel Research International.DOI
152. Jingyu Li, Guoguang Cheng, Qiang Ruan, Jixiang Pan, Xingrun Chen (2019). Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Ti-Stabilized 18Cr Stainless Steel. Metallurgical and Materials Transactions B.DOI
153. Weixing Dai, Guoguang Cheng, Shijian Li, Yu Huang, Guolei Zhang (2019). Numerical Simulation of Multiphase Flow and Mixing Behavior in an Industrial Single Snorkel Refining Furnace: Effect of Bubble Expansion and Snorkel Immersion Depth. ISIJ International.DOI
154. Yuyang Hou, Guoguang Cheng (2019). An Investigation of Columnar to Equiaxed Transition and the Effect of Cooling Rate on Nucleus Density Distribution of an Industrial Ti and Nb-Stabilized Ferritic Stainless Steel. Metallurgical and Materials Transactions A.DOI
155. Jingyu Li, Guoguang Cheng, Liuyi Li, Bin Sheng Hu, Changsong Xu, Guimin Wang (2019). Formation Mechanism of Oxide Inclusions in Cr–Mn–Ni Stainless Steel. ISIJ International.DOI
156. Jingyu Li, Guoguang Cheng (2019). Effect of CaO–MgO–SiO2–Al2O3–TiO2 Slags with Different CaF2 Contents on Inclusions in Ti-Stabilized 20Cr Stainless Steel. ISIJ International.DOI
157. Shijian Li, Guoguang Cheng, Yu Huang, Weixing Dai, Zhiqi Miao (2019). Kinetics of Phosphorus Transfer during Industrial Electroslag Remelting of G20CrNi2Mo Bearing Steel. Metals.DOI
158. Yu Huang, Guoguang Cheng, Shijian Li, Weixing Dai (2019). Precipitation Behavior of Large Primary Carbides in Cast H13 Steel. steel research international.DOI
159. Yuyang Hou, Guoguang Cheng (2019). Effects of Nucleus Density and Dendritic Growth Influenced by Ti and Nb on Solidification Structure of Fe-18 Pct Cr Ferritic Stainless Steel. Metallurgical and Materials Transactions B.DOI
160. Weixing Dai, Guoguang Cheng, Shijian Li, Yu Huang, Guolei Zhang, Yunlong Qiu, Weifei Zhu (2019). Numerical Simulation of Multiphase Flow and Mixing Behavior in an Industrial Single Snorkel Refining Furnace (SSRF): The Effect of Gas Injection Position and Snorkel Diameter. ISIJ International.DOI
161. Shijian Li, Guoguang Cheng, Zhiqi Miao, Lie Chen, Xin-yan Jiang (2019). Effect of slag on oxide inclusions in carburized bearing steel during industrial electroslag remelting. International Journal of Minerals Metallurgy and Materials.DOI
162. Xingrun Chen, Guoguang Cheng, Yuyang Hou, Jingyu Li (2019). Oxide-Inclusion Evolution in the Steelmaking Process of 304L Stainless Steel for Nuclear Power. Metals.DOI
163. Yuyang Hou, Guoguang Cheng (2019). Formation Mechanism and Nucleation Effect of Ti2O3–TiN Complex Nucleus at Solidification Front of 18Cr Ferritic Stainless Steel. Metallurgical and Materials Transactions B.DOI
164. Yu Huang, Guoguang Cheng, Qiming Wang, Shijian Li, Weixing Dai (2019). Mathematical model for decarburization of ultra-low carbon steel during RH treatment. Ironmaking & Steelmaking Processes Products and Applications.DOI
165. Jingyu Li, Guoguang Cheng, Qiang Ruan, Jixiang Pan, Xingrun Chen (2019). Evolution behaviour of nonmetallic inclusions in Ti-bearing 11Cr stainless steel with calcium treatment. Ironmaking & Steelmaking Processes Products and Applications.DOI
166. Xingrun Chen, Guoguang Cheng, Yuyang Hou, Jingyu Li (2019). Inclusions evolution during the LF refining process of 439 ultra-pure ferritic stainless steel. Metallurgical Research & Technology.DOI
167. Xingrun Chen, Guoguang Cheng, Yao Li, Yuyang Hou (2019). Research on the oxygen content in 304L stainless steel during VOD-LF-CC process based on IMCT. Metallurgical Research & Technology.DOI
168. 王启明，成国光，黄宇（2018）. M2高速钢大尺寸碳化物的形貌特征及析出机理. 《钢铁》.
169. 李明林，陈列，寇玉山，代卫星，成国光（2018）. 30 t VOD钢包冶炼不锈钢钢液流动模拟研究. 《钢铁研究学报》.
170. 左晓剑，刘洋，成国光，李晶（2018）. GCr15轴承钢连铸方坯与电渣重熔铸锭的原位统计分布分析. 《冶金分析》.
171. 左晓剑，成国光，李晶（2018）. 20MnSi钢连铸方坯的原位统计分布分析. 《冶金分析》.
172. 侯雨阳，成国光（2018）. Nb对双稳定铁素体不锈钢晶粒的钉扎作用. 《连铸》.
173. 冯永山，侯雨阳，成国光（2018）. 70号钢连铸过程的凝固传热模型与组织研究. 《连铸》.
174. 黄宇，成国光，谢有（2018）. 稀土Ce对钎具钢中夹杂物的改质机理研究. 《金属学报》.
175. 冯永山，侯雨阳，成国光（2018）. HRB400连铸坯的凝固组织缺陷分析. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
176. 李世健，成国光，杨景军，刘刚，刘新斌（2018）. 真空还原精炼渣冶金特性及应用. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
177. 李璟宇，成国光，阮强，潘吉祥，陈兴润（2018）. 409L超纯铁素体不锈钢精炼工艺研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
178. 刘扬，成国光（2018）. 单嘴精炼炉中夹杂物去除影响因素及位置分布的数值模拟. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
179. 黄宇，谢有，成国光（2018）. 国内外23CrNi3Mo钎具钢洁净度的差异. 《中国冶金》.
180. 苗志奇，成国光，李世健，陈列，刘治权，李程伟（2018）. 工业电渣重熔过程电极插入深度数学模型及应用. 《钢铁》.
181. 郝勇飞，成国光，谢有（2018）. 高速钢W4Mo3Cr4VSi中碳化物的析出行为. 《钢铁》.
182. 李世健，成国光，苗志奇，陈列，姜新岩（2018）. 自耗电极冶金质量对G20CrNi2Mo轴承钢电渣锭洁净度的影响. 《特殊钢》.
183. Jinlong Lu, Yunpeng Wang, Qiming Wang, Huijing Cheng, Guoguang Cheng (2018). Effect of MnS Inclusions Distribution on Intragranular Ferrite Formation in Medium Carbon Non-Quenched and Tempered Steel for Large-Sized Crankshaft. ISIJ International.DOI
184. Jingyu Li, Guoguang Cheng, Qiang Ruan, Jixiang Pan, Xingrun Chen (2018). Formation and Evolution of Oxide Inclusions in Titanium-Stabilized 18Cr Stainless Steel. ISIJ International.DOI
185. Xingrun Chen, Guoguang Cheng, Jingyu Li, Yuyang Hou, Jixiang Pan, Qiang Ruan (2018). Characteristics and Formation Mechanism of Inclusions in 304L Stainless Steel during the VOD Refining Process. Metals.DOI
186. Yu Huang, Guoguang Cheng, Shi-Jian Li, Weixing Dai, You Xie (2018). Effect of Ti(C, N) Particle on the Impact Toughness of B-Microalloyed Steel. Metals.DOI
187. Yuyang Hou, Guoguang Cheng (2018). Effect of Nb on the As-cast Structure and Compactness Degree of Ferritic Stainless Steel Dual Stabilized by Ti and Nb. ISIJ International.DOI
188. Yu Huang, Guoguang Cheng, Shijian Li, Weixing Dai (2018). Effect of Cerium on the Behavior of Inclusions in H13 Steel. steel research international.DOI
189. Jinlong Lu, Guoguang Cheng, Julong Che, Liansheng Wang, Guojian Xiong (2018). Effect of Oxides on Characteristics of MnS and Transverse Mechanical Properties in Commercial Al-Killed Non-Quenched and Tempered Steel. Metals and Materials International.DOI
190. Yuyang Hou, Shijian Li, Guoguang Cheng (2018). Effect of Nb Addition on Dendrite Growth and Equiaxed Grain Ratio of Fe-20 Pct Cr High-Purity Ferritic Stainless Steel. Metallurgical and Materials Transactions A.DOI
191. Shijian Li, Guoguang Cheng, Zhiqi Miao, Weixing Dai, Lie Chen, Zhi‐Quan Liu (2018). Evolution of Oxide Inclusions in G20CrNi2Mo Carburized Bearing Steel during Industrial Electroslag Remelting. ISIJ International.DOI
192. Jingyu Li, Guoguang Cheng, Qiang Ruan, Jixiang Pan, Xingrun Chen (2018). Evolution Mechanism of Oxide Inclusions in Titanium-Stabilized AISI 443 Stainless Steel. Metallurgical and Materials Transactions B.DOI
193. Jingyu Li, Guoguang Cheng, Qiang Ruan, LI Ju-cang, Jixiang Pan, Xingrun Chen (2018). Evolution Mechanism of Inclusions in Al-killed, Ti-bearing 11Cr Stainless Steel with Ca Treatment. ISIJ International.DOI
194. Jinlong Lu, Guoguang Cheng, Lie Chen, Guojian Xiong, Liansheng Wang (2018). Distribution and Morphology of MnS Inclusions in Resulfurized Non-Quenched and Tempered Steel with Zr Addition. ISIJ International.DOI
195. Jinlong Lu, Guoguang Cheng, Biao Tan, Julong Che (2018). Effect of Zr, Al Addition on Characteristics of MnS and Formation of Intragranular Ferrite in Non-Quenched and Tempered Steel. ISIJ International.DOI
196. Jingyu Li, Guoguang Cheng, Liuyi Li, Bin Hu, Changsong Xu, Guimin Wang (2018). The Formation Mechanism of Mn–Al–O Inclusions in Fe–Cr–Mn Stainless Steel during Continuous Casting. steel research international.DOI
197. 黄宇，谢有，成国光，陈列，张燕东，严清忠（2017）. H13钢中Mg-Al-O系夹杂物的形成机理及控制. 《钢铁》.
198. 李璟宇，成国光，钱国余，李六一，胡斌，王贵民（2017）. 304不锈钢热(冷)轧板表面线缺陷. 《中国冶金》.
199. 屈志东，成国光，万文华，滕力宏，黄永生，王日红（2017）. 20Cr13不锈钢脱氧夹杂物研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
200. 郝勇飞，成国光，谢有（2017）. 含铌H13钢中一次碳氮化物生成机理及热稳定性. 《材料热处理学报》.
201. 王承顺，李六一，成国光，张建国，李渔，罗德洪（2017）. 304不锈钢板坯浸入式水口形状对铸坯凝固组织的影响. 《连铸》.
202. 屈志东，成国光，万文华，滕力宏，黄永生，王日红（2017）. Al脱氧961不锈钢夹杂物研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
203. 黄宇，谢有，成国光，陈列，严清忠，张燕东（2017）. 稀土对于H13钢中夹杂物的影响. 《中国稀土学会2017学术年会摘要集》.
204. 黄宇，谢有，成国光，陈列，张燕东，严清忠（2017）. 稀土对于H13钢中大尺寸非均质形核碳化物的影响. 《中国稀土学报》.
205. 曲明磊，成国光，李世健，陈列，严清忠，梁明（2017）. 2.3t电渣锭重熔过程电极插入深度的数学模型和应用. 《特殊钢》.
206. Liang Yang, Guoguang Cheng (2017). Characteristics of Al2O3, MnS, and TiN inclusions in the remelting process of bearing steel. International Journal of Minerals Metallurgy and Materials.DOI
207. Liuyi Li, Guoguang Cheng, Bin Hu, Cheng-Shun Wang, Guoyu Qian (2017). Formation of Non-metallic Inclusions of Si-killed Stainless Steel during GOR Refining Process. High Temperature Materials and Processes.DOI
208. Chao Chen, Guoguang Cheng (2017). Delta-Ferrite Distribution in a Continuous Casting Slab of Fe-Cr-Mn Austenitic Stainless Steel. Metallurgical and Materials Transactions B.DOI
209. Liang Yang, Bryan Arthur Webler, Guoguang Cheng (2017). Precipitation behavior of titanium nitride on a primary inclusion particle during solidification of bearing steel. Journal of Iron and Steel Research International.DOI
210. Shijian Li, Guoguang Cheng, Liang Yang, Lie Chen, Qingzhong Yan, Chengwei Li (2017). A Thermodynamic Model to Design the Equilibrium Slag Compositions during Electroslag Remelting Process: Description and Verification. ISIJ International.DOI
211. Shijian Li, Guoguang Cheng, Zhiqi Miao, Lie Chen, Chengwei Li, Xin-yan Jiang (2017). Kinetic Analysis of Aluminum and Oxygen Variation of G20CrNi2Mo Bearing Steel during Industrial Electroslag Remelting Process. ISIJ International.DOI
212. You Xie, Guoguang Cheng, Xiaoling Meng, Yu Huang (2017). Thermal stability of primary elongated V-rich carbonitrides in H13 tool steel. Metallurgical Research & Technology.DOI
213. Hao Yongfei, Guoguang Cheng, Qiqi Ma (2017). Effect of rare earth addition on the heterogeneous nucleation behavior of TiN in duplex stainless steel. Metallurgical Research & Technology.DOI
214. 代卫星，成国光（2016）. 真空下钢液中气泡上浮行为的数值模拟. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
215. 曲明磊，成国光（2016）. 电渣重熔过程中电极插入深度的数学模型. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
216. 孟晓玲，成国光（2016）. 特殊钢精炼渣系设计模型及应用. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
217. 陈列，谢有，寇玉山，成国光，张燕东，严清忠，赵海东（2016）. 铌微合金化H13钢中异相形核(Ti,Nb,V)(C,N)相形成机理研究. 《炼钢》.
218. 阮强，钱国余，潘吉祥，陈兴润，成国光（2016）. 含钛不锈钢夹杂物对浸入式水口堵塞的影响. 《炼钢》.
219. 钱国余，屈志东，成国光，李六一，张建国，李璟宇（2016）. FeSi中铝对不锈钢连铸和热轧板表面缺陷影响. 《钢铁》.
220. 钱国余，李六一，成国光，张建国，李渔，王承顺（2016）. GOR冶炼不锈钢深脱硫工艺. 《钢铁》.
221. 李璟宇，阮强，成国光，潘吉祥，侯海滨（2016）. 409L不锈钢脱氧工艺研究. 《第十九届（2016年）全国炼钢学术会议》.
222. 阮强，陈兴润，潘吉祥，成国光（2016）. 110t不锈钢钢包炉底吹氩水模拟. 《中国冶金》.
223. 谢有，成国光，陈列，张燕东，严清忠（2016）. H13热作模具钢大尺寸析出相特征及生成机制. 《中国冶金》.
224. 赵海东，陈列，严清忠，李世健，杨亮，成国光（2016）. 电渣重熔对GCr15轴承钢化学成分和夹杂物特性的影响. 《特殊钢》.
225. Liuyi Li, Guoguang Cheng, Bin Hu, Cheng-Shun Wang, Guoyu Qian (2016). Effect of Cr2O3 on the properties of stainless steel refining slags and desulfurization. Metallurgical Research & Technology.DOI
226. You Xie, Guoguang Cheng, Lie Chen, Yandong Zhang, Qingzhong Yan (2016). Mechanism of generation of large (Ti,Nb,V)(C,N)-type precipitates in H13 + Nb tool steel. International Journal of Minerals Metallurgy and Materials.DOI
227. You Xie, Guoguang Cheng, Lie Chen, Yandong Zhang, Qingzhong Yan (2016). Generating Mechanism of Large Heterogeneous Carbonitrides with Multiple Layers in H13 + Nb Bar. steel research international.DOI
228. Bing Fu, Haijun Wang, Jian-xin Yan, Xiang Li, Shengtao Qiu, Guoguang Cheng (2016). Effects of Temperature and Alloying Elements on γ Phase Fraction of Grain-oriented Silicon Steel. Journal of Iron and Steel Research International.DOI
229. You Xie, Guoguang Cheng, Lie Chen, Yandong Zhang, Qingzhong Yan (2016). The Characteristics and Generating Mechanism of Large Precipitates in Ti-Containing H13 Tool Steel. High Temperature Materials and Processes.DOI
230. Chao Chen, Peiyuan Ni, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Pär G. Jönsson (2016). A Model Study of Inclusions Deposition, Macroscopic Transport, and Dynamic Removal at Steel–Slag Interface for Different Tundish Designs. Metallurgical and Materials Transactions B.DOI
231. You Xie, Guoguang Cheng, Lie Chen, Yandong Zhang, Qingzhong Yan (2016). Characteristics and Generating Mechanism of Large Precipitates in Nb–Ti-microalloyed H13 Tool Steel. ISIJ International.DOI
232. You Xie, Guoguang Cheng, Xiaoling Meng, Lie Chen, Yandong Zhang (2016). Precipitation Behavior of Primary Precipitates in Ti-microalloyed H13 Tool Steel. ISIJ International.DOI
233. You Xie, Guoguang Cheng, Lie Chen, Yandong Zhang, Qingzhong Yan (2016). The degeneration of the heterogeneous nucleation for the large precipitates (Ti,Nb,V)(C,N) in ESR H13+Nb tool steel with low-MgO slag. Metallurgical Research & Technology.DOI
234. 李世健，杨亮，成国光，陈列，严清忠，赵海东（2015）. 电渣重熔GCr15轴承钢化学成分变化及夹杂物特性研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
235. 李风伟，成国光（2015）. GCr15轴承钢精炼渣成分预测模型. 《中国冶金》.
236. 崔国军，刘敬军，马富平，蔡士中，成国光（2015）. 邢钢小方坯连铸中碳铝镇静钢坯的三次冷却工艺. 《2015年炼钢品种、质量提升研讨会论文集》.
237. 谢有，成国光，孟晓玲，屈志东，陈列，张燕东，赵海东（2015）. 含钛H13热作模具钢中大尺寸析出物特征及热稳定性研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
238. 王承顺，李六一，成国光，张建国，李渔，屈志东（2015）. 不锈钢连铸中间包外壳倾角对流场影响的水模拟试验和应用. 《特殊钢》.
239. 王承顺，成国光，李六一，张建国，徐昌松，屈志东，刘扬（2015）. 不锈钢精炼钢包流场优化研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
240. 严清忠，陈列，李发文，佐辉，吴彬，鲁延明，李征，赵海东，成国光（2015）. 叶片钢1Cr12Ni2Mo2VN 1.1t电渣锭重熔工艺的优化. 《特殊钢》.
241. Liang Yang, Guoguang Cheng, Shijian Li, Min Zhao, Gui-ping Feng, Tao Li (2015). A coupled model of TiN inclusion growth in GCr15SiMn during solidification in the electroslag remelting process. International Journal of Minerals Metallurgy and Materials.DOI
242. Chao Chen, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Pär G. Jönsson (2015). Erratum to: A Mathematical Modeling Study of Tracer Mixing in a Continuous Casting Tundish. Metallurgical and Materials Transactions B.DOI
243. Chao Chen, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Pär G. Jönsson (2015). A mathematical modeling study of the influence of small amounts of KCl solution tracers on mixing in water and residence time distribution of tracers in a continuous flow reactor-metallurgical tundish. Chemical Engineering Science.DOI
244. Qiqi Ma, Chengchuan Wu, Guoguang Cheng, Fengwei Li (2015). Characteristic and Formation Mechanism of Inclusions in 2205 Duplex Stainless Steel Containing Rare Earth Elements. Materials Today Proceedings.DOI
245. Liang Yang, Guoguang Cheng, Shijian Li, Min Zhao, Gui-ping Feng (2015). Generation Mechanism of TiN Inclusion for GCr15SiMn during Electroslag Remelting Process. ISIJ International.DOI
246. Liang Yang, Guoguang Cheng, Shijian Li, Min Zhao, Gui-ping Feng (2015). Characteristics of MgAl2O4-TiN Complex Inclusion Precipitation and Growth during Solidification of GCr15SiMn in ESR Process. ISIJ International.DOI
247. Liang Yang, Shijian Li, Guoguang Cheng, Fuming Wang (2015). The Behavior of MgAl2O4-TiN Complex Inclusion in Consumable Electrode during ESR for GCr15SiMn. Materials Today Proceedings.DOI
248. 王鑫潮，游志敏，成国光，寇玉山，左辉，陈列（2014）. VOD炉冶炼20Cr13不锈钢硅脱氧工艺. 《钢铁》.
249. 杨景军，吴洋，成国光（2014）. CaO-SiO2-MgO-Al2O3-CaF2五元渣系熔化特性的研究. 《热加工工艺》.
250. 吴铖川，成国光（2014）. CaO-MnO-SiO2渣系的表面张力计算模型. 《热加工工艺》.
251. 田俊，薛顺，吴铖川，成国光，周国治，王文虎，盛伟（2014）. 弹簧钢热处理前后显微组织对抗腐蚀性能的影响. 《材料工程》.
252. 张迎春，成国光，钱国余，刘敬军，贾育华，邸永田（2014）. 改善2Cr13马氏体不锈钢150mm×150mm连铸坯表面质量的工艺实践. 《特殊钢》.
253. 付兵，项利，仇圣桃，成国光（2014）. 获得抑制剂法生产低温高磁感取向硅钢的抑制剂控制研究进展. 《过程工程学报》.
254. 王鑫潮，王红娜，成国光，寇玉山，左辉，陈列（2014）. 20Cr13不锈钢热轧棒材夹杂物研究. 《中国冶金》.
255. 王红娜，杨亮，郑宝安，樊世亮，陈列，成国光（2014）. 三流非对称连铸18t中间包流场的物理和数学模拟. 《特殊钢》.
256. 杨景军，庞瑞朋，成国光（2014）. 水冷模铸下430铁素体不锈钢温度场和流场的数值模拟. 《材料热处理学报》.
257. 付兵，项利，凌晨，樊立峰，仇圣桃，成国光（2014）. 薄板坯连铸连轧流程试制含钒钛取向硅钢中氮化物析出相. 《工程科学学报》.
258. 吴铖川，成国光（2014）. CaO-Al2O3-TiO2熔渣表面张力计算模型. 《上海金属》.
259. 吴铖川，成国光，马琦琦（2014）. CaF2-CaO-Al2O3-MgO-SiO2渣系表面张力计算模型. 《上海金属》.
260. 郝彦英，成国光，王强（2014）. 控制钢中氢含量的工艺措施. 《河北冶金》.
261. 杨亮，李世健，成国光，宫春林，周民俊（2014）. 电渣重熔GCr15SiMn轴承钢轧材夹杂物特征研究. 《上海金属》.
262. 吴铖川，成国光（2014）. RE2O3-MgO-SiO2（RE=La,Nd,Sm,Gd和Y）熔体表面张力的计算模型（英文）. Transactions of Nonferrous Metals Society of China.
263. 杨景军，成国光（2014）. CaO-Al2O3-MgO三元渣对钢液洁净度影响的研究. 《工业加热》.
264. Guoyu Qian, Guoguang Cheng, Zibing Hou (2014). The Influence of the Induced Ferrite and Precipitates of Ti-bearing Steel on the Ductility of Continuous Casting Slab. High Temperature Materials and Processes.DOI
265. Chengchuan Wu, Guoguang Cheng (2014). Calculating models on surface tension of RE2O3–MgO–SiO2 (RE=La, Nd, Sm, Gd and Y) melts. Transactions of Nonferrous Metals Society of China.DOI
266. Chao Chen, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Pär G. Jönsson (2014). A Mathematical Modeling Study of Tracer Mixing in a Continuous Casting Tundish. Metallurgical and Materials Transactions B.DOI
267. Zhimin You, Guoguang Cheng, Xinchao Wang, Zhe Qin, Jun Lei Tian, Jian Zhang (2014). Mathematical Model for Decarburization of Ultra-low Carbon Steel in Single Snorkel Refining Furnace. Metallurgical and Materials Transactions B.DOI
268. Zibing Hou, Guanghua Wen, Ping Tang, Guoguang Cheng (2014). Periodicity of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet by Using Singular Spectrum Analysis. Metallurgical and Materials Transactions B.DOI
269. Jixiang Pan, Guoyu Qian, Guoguang Cheng, Yan Li, Wei Pan, Zibing Hou, Chao Chen (2014). Effect of Cu on Surface Microcrack of Austenitic Stainless Cold Rolled Coil. Journal of Iron and Steel Research International.DOI
270. Guoyu Qian, Guoguang Cheng, Zibing Hou (2014). Effect of the Induced Ferrite and Precipitates of Nb–Ti Bearing Steel on the Ductility of Continuous Casting Slab. ISIJ International.DOI
271. Guoyu Qian, Fang Ming Jiang, Guoguang Cheng, C.-S. Wang (2014). Effect of TiO 2 addition to LF refining slag on the Ti, Al, and cleanliness of Ti-stabilized stainless steel. Metallurgical Research & Technology.DOI
272. 潘吉祥，钱国余，成国光，李岩，潘伟，侯自兵，陈超（2013）. Cu对奥氏体不锈钢冷轧卷表面裂纹的影响. 《第十七届（2013年）全国炼钢学术会议论文集（B卷）》.
273. 王红娜，王鑫潮，郑宝安，樊世亮，陈列，成国光（2013）. 三流异型连铸中间包结构优化的数值模拟. 《武汉科技大学学报》.
274. 薛顺，田俊，成国光，周国治，王文虎（2013）. 新型高铁弹条用弹簧钢的表面脱碳及氧化性能. 《钢铁研究学报》.
275. 吴铖川，成国光（2013）. 电渣重熔用La2O3-Al2O3-CaF2精炼渣作用浓度模型. 《钢铁研究学报》.
276. 薛顺，田俊，成国光，王文虎，盛伟（2013）. 高铁用新型弹条用钢连续冷却转变曲线与热处理工艺. 《热加工工艺》.
277. 张海泉，谢有，成国光，陈列，寇玉山（2013）. 含硫齿轮钢SAE8620H热轧棒材夹杂物. 《钢铁》.
278. 仇圣桃，付兵，项利，成国光（2013）. 高磁感取向硅钢生产技术与工艺的研发进展及趋势. 《钢铁》.
279. 田俊，薛顺，成国光，吴铖川（2013）. 中低碳高强度弹簧钢成分对表面脱碳的影响. 《金属热处理》.
280. 吴铖川，成国光，龙鹄（2013）. 含Ce2O3渣系作用浓度的计算模型. 《中国有色金属学报》.
281. 谢有，张海泉，寇玉山，陈列，成国光（2013）. 低氧GCr15轴承钢棒材夹杂物特征研究. 《第九届中国钢铁年会论文集》.
282. 杨亮，成国光，胥明旺，韦士来，叶高旗，李世健（2013）. 含铬铁水转炉冶炼的炉渣组成研究. 《第九届中国钢铁年会论文集》.
283. 游志敏，成国光（2013）. 单嘴精炼炉自然脱碳过程的数学模拟研究. 《第九届中国钢铁年会论文集》.
284. 王红娜，张毅勇，郑保安，尚大军，陈列，成国光（2013）. 五流特殊钢连铸中间包控流装置优化的水模型研究. 《第九届中国钢铁年会论文集》.
285. 侯自兵，成国光（2013）. 连铸方坯内拉坯方向碳元素分布时间序列的典型分析. 《第九届中国钢铁年会论文集》.
286. 成国光，芮其宣，秦哲，张鉴（2013）. 单嘴精炼炉技术的开发与应用. 《中国冶金》.
287. 陈超，侯海滨，成国光，潘吉祥，李岩，潘伟（2013）. 脱磷铁水-110t AOD-LF-CC-热轧流程304不锈钢中夹杂物的演变. 《特殊钢》.
288. 吴铖川，成国光，田俊，谢有（2013）. 稀土元素在含残余砷、锡09Cr2AlMoRE钢中的作用. 《中国稀土学报》.
289. 田俊，薛顺，吴铖川，成国光（2013）. 微量稀土对中低碳弹簧钢耐腐蚀性能的影响. 《腐蚀科学与防护技术》.
290. 芮其宣，成国光（2013）. 130 t单嘴精炼炉真空室内覆盖脱硫渣的钢液流场数值模拟. 《特殊钢》.
291. Chengchuan Wu, Guoguang Cheng, Hu Long (2013). Effect of Ce 2 O 3 and CaO/Al 2 O 3 on the Phase, Melting Temperature and Viscosity of CaO-Al 2 O 3 -10 Mass% SiO 2 Based Slags. High Temperature Materials and Processes.DOI
292. Chengchuan Wu, Guoguang Cheng, Jun Lei Tian (2013). A Thermodynamic Model for Evaluation of Mass Action Concentrations of La 2 O 3 -Al 2 O 3 -CaF 2 -CaO-MgO Slags for Electroslag Remelting Based on the Ion and Molecule Coexistence Theory. High Temperature Materials and Processes.DOI
293. Fang Ming Jiang, Guoguang Cheng, You Xie, Guoyu Qian, Qixuan Rui, Yunxia Song (2013). Reoxidation of Al-Killed Molten Steel by Fe2O3and Cr2O3in the Magnesia-Chromite Refractory. steel research international.DOI
294. Chao Chen, Qixuan Rui, Guoguang Cheng (2013). Effect of Salt Tracer Amount on the Mixing Time Measurement in a Hydrodynamic Model of Gas‐Stirred Ladle System. steel research international.DOI
295. Fang Ming Jiang, Guoguang Cheng, Guoyu Qian, You Xie, Qixuan Rui, Liang Yang (2013). Evaluation of Sulfur Addition to the High Basicity Slag on the Sulfur, Aluminum, and Cleanliness of High Sulfur Al‐Killed Molten Steel. steel research international.DOI
296. Zibing Hou, Guoguang Cheng, Fang Ming Jiang, Guoyu Qian (2013). Compactness Degree of Longitudinal Section of Outer Columnar Grain Zone in Continuous Casting Billet Using Cellular Automaton-Finite Element Method. ISIJ International.DOI
297. Cheng Guoguang (2013). Recent Research Trends and Developments of Production Process and Technology for High Magnetic Induction Grain-Oriented Silicon Steel. Ironmaking & Steelmaking Processes Products and Applications.
298. Cheng Guoguang (2013). Research Status and Technological Analysis of Producing High Magnetic Induction Grain-oriented Silicon Steel by Thin Slab Casting and Rolling Process. Cailiao daobao.
299. 钱国余，侯自兵，成国光（2012）. Nb对船板钢连铸坯高温力学性能的影响. 《2012年微合金钢连铸裂纹控制技术研讨会》.
300. 李崇巍，成国光，王新华，朱国森，崔爱民（2012）. RH吹氧操作对超低碳钢脱碳速率的影响. 《钢铁》.
301. 付邦豪，陈超，成国光，潘吉祥，李岩，潘伟（2012）. 430不锈钢冶炼过程的夹杂物. 《钢铁》.
302. 田俊，刘岩，成国光（2012）. 热轧H13钢硬度不均匀性的分析. 《钢铁》.
303. 段建平，张永亮，杨学民，成国光，张鉴（2012）. 80t单嘴真空精炼炉冶金功能的生产实验分析. 《特殊钢》.
304. 张志宏，刘江伟，郑锦峰，刘伟平，成国光（2012）. 20钢Φ300mm圆铸坯中间裂纹成因分析和改善工艺措施. 《特殊钢》.
305. Chengchuan Wu, Guoguang Cheng, Hu Long, Xiaohong Yang (2012). A Thermodynamic Model for Evaluation of Mass Action Concentrations of Ce 2 O 3 -contained Slag Systems Based on the Ion and Molecule Coexistence Theory. High Temperature Materials and Processes.DOI
306. Qixuan Rui, Fang Ming Jiang, Zhuang Ma, Zhimin You, Guoguang Cheng, Jian Zhang (2012). Effect of Elliptical Snorkel on the Decarburization Rate in Single Snorkel Refining Furnace. steel research international.DOI
307. Zibing Hou, Guoguang Cheng, Chengchuan Wu, Chao Chen (2012). Time-Series Analysis Technologies Applied to the Study of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet. Metallurgical and Materials Transactions B.DOI
308. Chao Chen, Guoguang Cheng, Haibo Sun, Zibing Hou, Xinchao Wang, Jiaquan Zhang (2012). Effects of Salt Tracer Amount, Concentration and Kind on the Fluid Flow Behavior in a Hydrodynamic Model of Continuous Casting Tundish. steel research international.DOI
309. Fang Ming Jiang, Yan Liu, You Xie, Guoguang Cheng (2012). Reoxidation of Al‐Killed Steel by Ca(OH)2 in the High Basicity Slag. steel research international.DOI
310. LI Chong-wei, Guoguang Cheng, Xinhua Wang, Guosen Zhu, Cui Ai-min (2012). Mathematical Model of RH Blow Argon Mode Affecting: Decarburization Rate in Ultra-Low Carbon Steel Refining. Journal of Iron and Steel Research International.DOI
311. Fang Ming Jiang, Guoguang Cheng (2012). Effects of gas injection with multihole orifices in upleg snorkel on bubble behaviour and decarburisation rate during RH refining. Ironmaking & Steelmaking Processes Products and Applications.DOI
312. Zibing Hou, Fang Ming Jiang, Guoguang Cheng (2012). Solidification Structure and Compactness Degree of Central Equiaxed Grain Zone in Continuous Casting Billet Using Cellular Automaton-Finite Element Method. ISIJ International.DOI
313. Cheng Guoguang (2012). Analysis of the Hardness Inhomogeneity in Hot-Rolled Product of H13 Steel. Ironmaking & Steelmaking Processes Products and Applications.
314. 侯自兵，成国光，饶添荣，马小春（2011）. 船板钢连铸坯的高温力学性能及断口液膜现象. 《钢铁研究学报》.
315. 马小春，于春梅，成国光，张鉴（2011）. MnO-FeO-SiO2-Al2O3渣系作用浓度的计算模型. 《钢铁研究学报》.
316. 侯自兵，成国光（2011）. 特殊钢连铸方坯中心区域宏观偏析定量化模型研究. 《连铸》.
317. 陈超，朱梅婷，杨海阔，于春梅，成国光（2011）. 四流中间包非正常工况下流动行为研究. 《连铸》.
318. 施晓芳，成国光，赵沛（2011）. Al对含钛430不锈钢夹杂物的影响. 《钢铁钒钛》.
319. 李崇巍，成国光，王新华，朱国森，崔爱民（2011）. RH真空压降模式对超低碳钢脱碳速率的影响. 《钢铁》.
320. 侯自兵，成国光，饶添荣（2011）. 连铸板坯中心线偏析形成机制与轻压下技术. 《钢铁》.
321. 段建平，张永亮，杨学民，成国光，张鉴，郭汉杰（2011）. 80t单嘴真空精炼装置脱碳工艺试验研究. 《钢铁》.
322. 付邦豪，侯海滨，成国光，潘吉祥，李岩，潘伟（2011）. 409L不锈钢冶炼过程夹杂物特征及成因. 《钢铁》.
323. 秦哲，潘宏伟，朱梅婷，成国光，张鉴（2011）. 单嘴精炼炉真空处理过程钢液流动行为模拟研究. 《钢铁》.
324. 段建平，张永亮，杨学民，成国光，张鉴（2011）. 80t多功能单嘴真空精炼炉脱硫冶金特性. 《炼钢》.
325. 李崇巍，成国光，王新华，朱国森，崔爱民（2011）. RH冶炼超低碳钢脱碳机理研究. 《炼钢》.
326. 张志宏，刘伟平，李国光，成国光（2011）. Φ500mm大圆坯连铸机的生产实践. 《特殊钢》.
327. Xiaohong Yang, Hu Long, Guoguang Cheng, Chengchuan Wu, Bin Wu (2011). Effect of refining slag containing Ce2O3 on steel cleanliness. Journal of Rare Earths.DOI
328. 李崇巍，成国光，王新华，朱国森，崔爱民（2011）. RH冶炼超低碳钢内部脱碳机理及控制工艺. 《工程科学学报》.
329. 马小春，成国光，张鉴（2011）. CaO—MnO—SiO2渣系作用浓度的计算模型. 《工程科学学报》.
330. 马小春，成国光（2011）. MnO-SiO2-Al2O3渣系作用浓度的计算模型. 《上海金属》.
331. 李红星，邹文喜，侯自兵，安邦，任振海，杜建峰，朱惠刚，成国光（2011）. 兴澄特钢新型钢包钢液流动物理模拟研究. 《特殊钢》.
332. Fang Ming Jiang, Yun-Xia Song, Guoguang Cheng (2011). Effect of orifice configuration on the volumetric mass transfer coefficient during ladle purging. Revue de Métallurgie.DOI
333. Cheng Guoguang (2011). Quantitative Model on Central Region Macrosegregation of Continuously Cast Billet of Special Steel. Continuous Casting.
334. Cheng Guoguang (2011). Investigation of the Fluid Flow Behavior Under the Non-Normal Operation in Four-Strand Tundish. Continuous Casting.
335. 余国松，成国光（2010）. 低碳易切削钢LF炉精炼渣控制工艺. 《钢铁》.
336. 邹文喜，任振海，杜建峰，李红星，刘绍康，侯自兵，安邦，成国光（2010）. 兴澄新型中间包钢液流动行为水模型研究. 《重型机械》.
337. 施晓芳，成国光，赵沛（2010）. 430铁素体不锈钢中Ti2O3+TiN复合核心形成的热力学研究. 《工程科学学报》.
338. 秦哲，潘宏伟，朱梅婷，成国光，张鉴（2010）. 单嘴精炼炉真空处理过程钢液流动行为研究. 《第十六届全国炼钢学术会议论文集》.
339. 施晓芳，成国光，赵沛（2010）. 钛改善430铁素体不锈钢凝固组织的研究. 《2010年全国冶金物理化学学术会议专辑(上册)》.
340. 饶添荣，李杰，成国光，侯自兵（2010）. DH36高强度船板拉伸断口分离缺陷分析. 《钢铁研究》.
341. 杨晓红，吴鹏飞，张金元，成国光（2010）. 高洁净特殊钢中铝酸稀土夹杂物形成机理. 《2010年全国冶金物理化学学术会议专辑（下册）》.
342. 李崇巍，成国光，王新华，朱国森，崔爱民（2010）. RH自然脱碳数学模型的建立以及脱碳机理研究. 《2010年全国冶金物理化学学术会议专辑(上册)》.
343. 杨晓红，吴鹏飞，吴铖川，成国光（2010）. 特殊钢中稀土变质夹杂物行为研究. 《中国稀土学报》.
344. 秦哲，朱梅婷，成国光，张鉴（2010）. 单嘴精炼炉真空处理过程气泡行为及冶金效果研究. 《特殊钢》.
345. 秦哲，朱梅婷，成国光，张鉴（2010）. 单嘴精炼炉合金料加入方式及混匀特性水模型研究. 《特殊钢》.
346. Guanghui Li, Bao Wang, Qing Liu, Xinzhong Tian, Rong Zhu, Li-ning Hu, Guoguang Cheng (2010). A process model for BOF process based on bath mixing degree. International Journal of Minerals Metallurgy and Materials.DOI
347. Minglin Wang, Guoguang Cheng, Shengtao Qiu, Pei Zhao, Yong Gan (2010). Roles of titanium-rich precipitates as inoculants during solidification in low carbon steel. International Journal of Minerals Metallurgy and Materials.DOI
348. 莫志英，王淼，秦哲，孙彦辉，成国光，蔡开科（2009）. RH处理超低碳钢中总氧含量的控制. 《炼钢》.
349. 李闯，郭汉杰，成国光（2009）. 铁水预处理中钛硅锰同时脱除规律及工艺研究. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会》.
350. 秦哲，孙彦辉，成国光，蔡开科（2009）. RH处理超低碳钢中总氧含量预报模型. 《钢铁》.
351. 杨晓红，吴鹏飞，张金元，成国光（2009）. 稀土铝铁合金的开发及应用. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会》.
352. 王明林，赵沛，成国光（2009）. 齿轮钢主要钢种高温力学性能研究. 《过程工程学报》.
353. 李闯，郭汉杰，成国光（2009）. 铁水温度、炉渣碱度和初始硅含量对碳饱和铁水脱锰的影响. 《特殊钢》.
354. 刘青，白素宏，卢军辉，张立强，成国光（2008）. 转炉特钢流程连铸-轧钢生产排产系统. 《工程科学学报》.
355. 施晓芳，成国光，赵沛（2008）. 含Ti复合核心对细化430铁素体不锈钢凝固组织的影响. 《2008年不锈钢连铸技术交流会论文集》.
356. 程子建，成东全，程树森，成国光（2008）. 酒钢板坯中间包等温钢液流场的数值模拟. 《钢铁研究学报》.
357. 程树森，成国光，程子建，成东全，杨晓强（2008）. 板坯中间包等温钢液流动的物理模拟与应用. 《炼钢》.
358. 施晓芳，成国光（2008）. 430不锈钢中TiN的形成和析出机理研究. 《炼钢》.
359. 杨晓红，张金元，吴鹏飞，成国光（2008）. 稀土铝铁合金脱氧夹杂物研究. 《2008年全国冶金物理化学学术会议专辑（上册）》.
360. Cai-xia Shi, Guoguang Cheng, Zhanjun Li, Pei Zhao (2008). Solidification Structure Refining of 430 Ferrite Stainless Steel With TiN Nucleation. Journal of Iron and Steel Research International.DOI
361. Cheng Guoguang (2008). Study on mechanism of TiN formation and precipitation in 430 stainless steel. Steelmaking.
362. Cheng Guoguang (2008). Numerical Simulation of Isothermal Liquid Steel Flow Field of Tundish for Slab Caster in Jiugang. Gangtie yanjiu xuebao.
363. 卢军辉，刘青，张立强，白素宏，成国光（2007）. 转炉特钢流程连铸—轧钢中间坯库的库存优化. 《工程科学学报》.
364. 史彩霞，施晓芳，成国光，赵沛（2007）. TiN对430铁素体不锈钢凝固组织的影响. 《特钢连铸技术研讨会》.
365. 施晓芳，成国光，史彩霞，赵沛（2007）. 含Ti复合核心细化430铁素体不锈钢凝固组织的研究. 《2007中国钢铁年会》.
366. 王明林，成国光，仇圣桃，赵沛，干勇（2007）. 凝固过程中含钛析出物的析出行为. 《钢铁研究学报》.
367. 成国光，孙红英，于春梅（2007）. GCr15轴承钢凝固组织对宏观碳偏析影响的基本规律. 《特钢连铸技术研讨会论文集》.
368. 于春梅，缪新德，杜建峰，石超民，成国光（2007）. 轴承钢不变形D类氧化物夹杂的形成与控制工艺. 《2007中国钢铁年会》.
369. 杨淑云，成国光（2007）. 板坯内部裂纹产生原因及控制. 《山西冶金》.
370. 成国光（2007）. 新编钢水精炼暨铁水预处理1500问. 《中国科学技术出版社》.
371. 刘平，成国光（2007）. 新钢硅钢冶炼工艺及质量分析. 《江西冶金》.
372. 缪新德，于春梅，石超民，杜建峰，朱惠刚，成国光（2007）. 轴承钢中钙铝酸盐夹杂物的形成及控制. 《工程科学学报》.
373. 韩全军，成国光（2006）. 0Cr18Ni9不锈钢的冶炼工艺研究. 《宽厚板》.
374. 刘宪民，成国光，郝增林（2006）. GCr15轴承钢小方坯连铸低倍缺陷分析与控制. 《河北冶金》.
375. 史彩霞，成国光，石超民，李战军，赵沛（2006）. 430铁素体不锈钢TiN形核细化凝固组织的研究. 《2006年全国冶金物理化学学术会议》.
376. 宿立伟，程树森，成国光（2006）. LF炉吹氩数值模拟研究. 《2006年全国冶金物理化学学术会议论文集》.
377. 丁建国，程树森，成国光（2006）. 单水口带气幕挡墙梯形中间包流场数值模拟. 《2006年全国冶金物理化学学术会议》.
378. 李战军，成国光，史彩霞（2006）. 炉渣熔体与合金熔体的界面张力计算模型. 《2006年全国冶金物理化学学术会议论文集》.
379. 郭颖韬，翟正龙，刘建华，成国光（2005）. 齿轮钢子钢号20CrMnTiH3开发研究. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
380. 李修安，成国光，张鉴，高文芳，袁伟霞（2005）. 基于转炉炉气在线分析的钢液碳含量和温度预报模型. 《冶金研究中心2005年“冶金工程科学论坛”》.
381. 赵建，王华，成国光，张鉴，范光前，余志祥，汪小川，区铁，袁伟霞（2005）. 单嘴精炼炉混匀特性水模型研究. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
382. 丁建国，程树森，成国光（2005）. 钢包长水口吹气对中间包流场影响的数值模拟. 《2005中国钢铁年会论文集（第3卷）》.
383. 张利君，程树森，成国光（2005）. 连铸中间包非等温钢液流场的研究. 《2005中国钢铁年会论文集（第3卷）》.
384. 王华，赵建，成国光，张鉴，余志祥，汪晓川，区铁，袁伟霞（2005）. 单嘴精炼炉脱碳特性的水模型研究. 《第八届全国冶金工艺理论学术会议》.
385. 高伟，缪新德，成国光，杜建峰，朱惠刚（2005）. 轴承钢中TiN夹杂物控制工艺及理论研究. 《第八届全国冶金工艺理论学术会议》.
386. 王明林，成国光，仇圣桃，赵沛（2004）. 含钛低碳洁净钢凝固过程氧化物的析出和长大. Proceedings of Second International Conference on Advanced Structural Steels(ICASS 2004) Part 2.
387. 王明林，成国光，赵沛，仇圣桃，干勇（2004）. 含钛低碳钢凝固过程中氧化钛形成的热力学. 《钢铁研究学报》.
388. 王明林，成国光，杨新娥，赵沛，仇圣桃，干勇（2004）. 含钛低碳钢凝固过程中氧化钛的析出和长大. 《钢铁研究学报》.
389. 成国光，朱晓霞，彭岩峰，王玉钢，赵沛（2002）. 洁净钢氮化钛凝固细化技术的基础. 《工程科学学报》.
390. 成国光（2001）. 钢铁冶金专业本科毕业论文指导的实践与思考. 《中国冶金教育》.
391. 王明林，赵沛，罗海文，成国光，朱国良（2001）. 20CrMnTi齿轮钢热塑性的研究. 《钢铁》.
392. 成国光，宋波，陆钢，王新华，赵沛（2001）. 钢液深脱硫精炼工艺的研究. 《钢铁》.
393. 陆钢，成国光，宋波，王玉刚，王新华，赵沛（2001）. 含BaO,Na2O渣系渣钢间硫平衡研究. 《内蒙古科技大学学报》.
394. 罗海文，赵沛，成国光，常曙光，李德胜，杨柏华（2000）. 含钛钢奥氏体中第二相析出的热力学分析和实验研究. 《钢铁》.
395. 陆钢，成国光，宋波，赵沛，王新华（2000）. 超低硫钢精炼工艺. 《工程科学学报》.
396. 储少军，牛强，成国光（2000）. 矿热炉炉料中的渗流结构. 《铁合金》.
397. 罗海文，赵沛，王明林，成国光，朱国良（1999）. 铸态齿轮钢16MnCr5高温区形变断裂机理的研究. 《钢铁研究学报》.
398. 罗海文，赵沛，王明林，成国光，朱国良（1999）. SCM420钢在600℃至熔点温度范围内的热塑性. 《钢铁》.
399. 成国光，赵沛，徐学禄，吴洁，王林英（1999）. 真空下钢液脱氮工艺研究. 《钢铁》.
400. 薄开涛，成国光，吴洁，赵沛（1999）. 双条型磁极对连铸结晶器内钢液流动特性的影响. 《工程科学学报》.
401. Cheng Guoguang (1999). ON HOT DUCTILITY OF SCM420 STEEL FROM 600 X TO SOLIDUS POINT. Ironmaking & Steelmaking Processes Products and Applications.
402. 成国光，赵沛，刘龙生，马晓辉（1997）. 表面活性元素影响钢液吸氮机理的研究. 《钢铁研究》.
403. 吴洁，赵沛，成国光，王林英，贾光霖，张国志，高允彦（1997）. 连铸结晶器内钢液弯月面行为的研究. 《工程科学学报》.
404. 成国光，赵沛，李小平，王林英，马晓辉（1997）. 表面活性元素影响钢液脱氮动力学. 《过程工程学报》.
405. 陈伟庆，李士琦，成国光，陈煜（1997）. 直接还原铁在电弧炉炼钢中应用. 《特殊钢》.
406. 成国光，张鉴，赵沛（1997）. 含B2O3渣系的热力学计算模型. 《中国有色金属学报》.
407. 吴洁，赵沛，成国光，王林英，贾光霖，张国志，高允彦（1997）. 连铸结晶器内钢液弯月面区域速度场的测定. 《工程科学学报》.
408. 成国光，张鉴（1994）. Al-Si,Ca-Al,Ca-Si,Ca-Al-Si合金熔体作用浓度计算模型. 《中国有色金属学报》.
409. 成国光，张鉴，易兴俊（1993）. 钢包底吹氩搅拌卷渣机理的研究. 《炼钢》.
410. 成国光，张鉴（1993）. Bi-Pb合金熔体作用浓度计算模型. 《有色金属材料与工程》.
411. 成国光，张鉴（1992）. Bi—In合金熔体作用浓度的计算模型. 《过程工程学报》.