百晓学者学者目录

左敦稳

南京航空航天大学机电学院

个人简介

左敦稳，南京航空航天大学机电学院教授、博士生导师，研究方向包括精密加工、超硬涂层与工具、抗疲劳加工、先进切磨削、智能加工、金刚石工具、数字化制造、光整抛光加工技术、半导体基片固结磨料研抛加工技术等。

精选作品

期刊论文

  1. 曹文涛，孙玉利，闫哲，杨范轩，卢文壮，左敦稳（2026）. 增材制件内腔微细流道水基磨粒流光整加工流场仿真与试验验证. 《南京航空航天大学学报(自然科学版)》.DOI
  2. 范永见，周大庆，邢通，陈建康，邓志涛，左敦稳，李军（2026）. 基于灵敏度分析的机动方舱轻量化设计. 《机械制造与自动化》.
  3. Chuang Zhao, Hao Yi, Jia-Le Guo, Li-Min Zhu, Lingxi Guo, Jie Lan, Yu-Li Sun, Dun-Wen Zuo (2026). Prediction of subsurface damage in precision grinding of hemispherical resonators. Precision engineering.DOI
  4. Rufeng Li, Xin-Xiu Yu, Duo-Sheng Li, Shuang-Shuang Yu, Qing-Hua Qin, Yin Ye, Dun-Wen Zuo, Yu-Yan Liu, Yang-Yang Dao (2026). Study on the microstructure and properties of WC–DLC coatings under different bias voltages. Journal of Physics D: Applied Physics.DOI
  5. Xuan Zhao, Yu-Li Sun, Liao-Yuan Wang, Fanxuan Yang, Chuang Zhao, Dun-Wen Zuo (2026). Experimental study on the preparation and finishing performance of glass fiber-reinforced magnetic abrasives prepared by a curing-demolding method. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture.DOI
  6. Chuang Zhao, Yu-Li Sun, Zi-Shuo Zhang, Yi-Xin Yang, Wen-Zhuang Lu, Dan Zhang, Ye-Bin Sun, Dun-Wen Zuo (2026). Nanofluid-assisted heterogeneous nucleation for controlled preparation of ice-bonded abrasive particles via cryogenic atomization. Powder Technology.DOI
  7. Zi-Shuo Zhang, Yu-Li Sun, Chuang Zhao, Xiaoxiang Wang, Wenzhuang Lu, Dan Zhang, Ye-Bin Sun, Dun-Wen Zuo (2026). Investigation on phase change behavior and regulation of water-based nanofluids. Powder Technology.DOI
  8. Xian-Qing Shi, Cheng-Zuan Gao, Feng Xu, Wen-Xuan Zhao, Yuan Liu, Yanan Ge, Ying Hong, Dun-Wen Zuo (2026). Enhanced tribo-corrosion resistance in DLC films via balancing (NbTaMoWAl)x multi-element doping stoichiometric. Tribology International.DOI
  9. Zhan-Jiang Li, Xianrui Zhao, Yu-Lang Xu, Xunbai Du, Deyin Li, Qiangyong Zhang, Dun-Wen Zuo, Wenzhuang Lu, Qun-Hua Tang, Pin-Qiang Dai (2026). Microstructure evolution and compression properties of NbTiV lightweight refractory medium entropy alloys with different Si contents. Intermetallics (Barking).DOI
  10. Xiaoxiang Wang, Dan Zhang, Yu-Li Sun, San Li, Q. Guan, Ji-Jian Wei, Yuan-Chong Zhang, Dun-Wen Zuo (2026). Research on mathematical modeling and geometric characteristics of the S-shaped fillet. The International Journal of Advanced Manufacturing Technology.DOI
  11. Zhan-Jiang Li, Xianrui Zhao, Yu-Lang Xu, Xunbai Du, Deyin Li, Qiangyong Zhang, Dun-Wen Zuo, Wenzhuang Lu, Qun-Hua Tang, Pin-qiang Dai (2026). Excellent strength and ductility of heterogeneous grain structures high-entropy alloys via salt bath flash annealing. Journal of Materials Research and Technology.DOI
  12. Wen-Xuan Zhao, Feng Xu, Xian-Qing Shi, Cheng-Zuan Gao, Yuan Liu, Yan-Chao Zhao, Wenchang Lang, Junhong Liu, Duo-Sheng Li, Dun-Wen Zuo (2026). Effect of acetylene flow rate on the mechanical, electrochemical, and tribocorrosion properties of Si-DLC coatings. Surface & Coatings Technology.DOI
  13. Xiaoxiang Wang, Dan Zhang, San Li, Q. Guan, Huijian Lu, Xishui Zhou, Jia-Jun Wang, Yu-Li Sun, Dun-Wen Zuo (2026). Actual Tool Pose-Driven Iterative Axis Displacement Compensation for Five-Axis Machine Tools. Precision engineering.DOI
  14. Xianqing Shi, Feng Hua Xu, Chengzuan Gao, Xu Ji, Hun Guo, Wenxuan Zhao, Dunwen Zuo (2026). Carbon stoichiometry-driven structural evolution in high-entropy multilayer coatings for superior tribo-corrosion resistance and biocompatibility. Surfaces and Interfaces.DOI
  15. Ping Zhang, Dunwen Zuo, Feng Xu (2026). Current-induced plasticity and softening mechanism of silicon carbide under direct current. Applied Surface Science.DOI
  16. Shuquan Song, Long Liu, Haoyu Sun, Yu Yan Sun, Dunwen Zuo, Fei Dou, Xiaoqiang Shen (2026). Preparation of carbide tool edges using magnetorheological fluids containing diamond abrasives: removal mechanism and process optimization. The International Journal of Advanced Manufacturing Technology.DOI
  17. Yuan Liu, Feng Xu, Wang Ma, Qiu-zhi Xu, Huan Wu Cheng, Xianqing Shi, Wenxuan Zhao, Chengzuan Gao, Dunwen Zuo (2026). Study on the phase structure and comprehensive properties of ReNx coatings prepared by magnetron sputtering. Surface and Coatings Technology.DOI
  18. Li Wensheng, Wu Kun, WANG Shuai, Xia Binhong, Zuo Dunwen, Lu Wenzhuang (2026). Design and experimental verification of the loading mechanism for a compact bolt installation tool. Mechanical sciences.DOI
  19. Huayang Wu, Jiejing Li, Haixu Liu, Dunwen Zuo (2025). An analysis of heat source contribution and design of optimal cooling method for ball screw feed system. International Journal Of Computer Integrated Manufacturing, Vol. 380, No. 2.DOI
  20. 刘彦磊，孙玉利，杨范轩，汪洪峰，范武林，胡鸿，左敦稳（2025）. 三通阀门内腔磨粒流光整加工流场仿真分析与试验验证. 《南京航空航天大学学报(自然科学版)》.
  21. 马震宇，徐锋，漆昌恒，何坤，樊建军，左敦稳（2025）. 滚压力对GH4169高温合金螺栓圆角滚压加工的影响. 《机械制造与自动化》.DOI
  22. 何坤，马震宇，樊建军，赵阳，漆昌恒，徐锋，左敦稳（2025）. GH4169螺栓圆角滚压对表面粗糙度和变形量的影响. 《机械制造与自动化》.DOI
  23. Cheng-Zuan Gao, Xian-Qing Shi, Feng Xu, Wen-Xuan Zhao, Yuan Liu, Dun-Wen Zuo (2025). Effects of inserting nano high-entropy carbide layers on the tribo-corrosion behavior of multilayer GLC films. Ceramics International.DOI
  24. Wen-Xuan Zhao, Feng Xu, Xian-Qing Shi, Cheng-Zuan Gao, Yuan Liu, Yan-Chao Zhao, Lei Shu, Dun-Wen Zuo (2025). Effects of pulsed direct current power supply on ta-C coatings: Microstructure, mechanical properties and tribocorrosion behavior. Surface & Coatings Technology.DOI
  25. Yan-Chao Zhao, Feng Xu, Liu Yuan, Wen-Xuan Zhao, Hailong Zhang, Dun-Wen Zuo (2025). Microstructural, mechanical and tribological performances of DLC/CrN multilayer films with different modulation period. Diamond and related materials.DOI
  26. Fanxuan Yang, Yu-Li Sun, Wen-Tao Cao, Yanlei Liu, Ye-Bing Sun, Hongfeng Wang, Dun-Wen Zuo (2025). Study on Fluid Abrasive Wear and Its Impact on Machining Performance. Wear.DOI
  27. Hailong Zhang, Xian-Qing Shi, Feng Xu, Ying Zhang, Yuan Liu, Lei Shu, Dun-Wen Zuo (2025). Machine learning to explore the corrosion resistance and descriptor-property correlation analysis of high-entropy alloys. Materials Today Communications.DOI
  28. Zhan-Jiang Li, Xianrui Zhao, Yu-Lang Xu, Xunbai Du, Li Chen, Deyin Li, Qiangyong Zhang, Dun-Wen Zuo, Wen-Zhuang Lu, Pin-qiang Dai, Qun-Hua Tang (2025). Tuning heterogeneous structure and enhancing tensile properties in a FeCoCrNiMnPx high-entropy alloys. Materials Science & Engineering: A.DOI
  29. Wen-Xuan Zhao, Feng Xu, Ao Yu, Shengji Zhou, Shuo Sun, Yuan Liu, Dun-Wen Zuo (2025). Morphological evolution mechanism of maskless diamond nanocones via Ar ion etching. Diamond and related materials.DOI
  30. Yangyang Zhao, Xianrui Zhao, Xiaoming Chen, Jingfu Song, Hui Wang, Fengli Niu, Xunbai Du, Wen-Zhuang Lu, Dun-Wen Zuo (2025). Particle breakage behavior of plastic abrasives and effect on coating removal from carbon fiber-reinforced polymer surface. The International Journal of Advanced Manufacturing Technology.DOI
  31. Zhan-Jiang Li, Xianrui Zhao, Yu-Lang Xu, Xunbai Du, Li Chen, Deyin Li, Qiangyong Zhang, Dun-Wen Zuo, Wen-Zhuang Lu, Qun-Hua Tang, Pinqiang Dai (2025). Effects of heterogeneous grain structure and Si addition on the corrosion behavior of FeCoCrNiMn high entropy alloys in 3.5 wt.% NaCl. Journal of Alloys and Compounds.DOI
  32. Shengbin Zhang, Houlong Zhang, Xiao-Peng Ding, Guoqing Cai, Dun-Wen Zuo, Xinlei Wei (2025). Laser-Limiting Performance of Wide-band Heterostructure based on Synergistic Effects of Thermal Phase Transition and Nonlinear Scattering. Surfaces and Interfaces.DOI
  33. Xian-Qing Shi, Feng Xu, Cheng-Zuan Gao, Qian Zhou, Hailong Zhang, Wen-Xuan Zhao, Yanan Ge, Dun-Wen Zuo (2025). Microstructure, mechanical and wear mechanisms of NbTaMoWAlC high entropy ceramics coating designed based on chemical descriptors. Materials Today Communications.DOI
  34. Gui-Guan Zhang, Wentian Ma, Yue-Wu Gao, Yu-Gang Zhao, Guo-Yong Zhao, Jianbing Meng, Dun-Wen Zuo, Yu-Li Sun (2025). Clarification of the effect of cooling rate on abrasive embedding behavior of PDMS in cryogenic abrasive air-jet machining. Journal of Manufacturing Processes.DOI
  35. Fanxuan Yang, Yu-Li Sun, Chang-Cheng Li, Rui-Feng Pan, Hongfeng Wang, Wen-Zhuang Lu, Ye-Bin Sun, Dun-Wen Zuo (2025). Mechanistic insights and performance assessment of multi‑sized fluid abrasives in abrasive flow machining. Tribology International.DOI
  36. Yuan Liu, Feng Xu, Chenxukun Lou, Yue Yan, Xian-Qing Shi, Wen-Xuan Zhao, Wang Ma, Hailong Zhang, Dun-Wen Zuo (2025). Effect of reactive ion etching on the photoluminescence intensity of nitrogen-vacancy color centers in microwave plasma chemical vapor deposition diamond films. Journal of Vacuum Science & Technology A.DOI
  37. Gui-Zhong Guo, Shusen Hou, Bing Liu, Xingzhu Du, Dun-Wen Zuo (2025). Improving the Corrosion Resistance and Blood Compatibility of Magnesium Alloy via Fe-Based Amorphous Composite Coating Prepared by Magnetron Sputtering. Coatings.DOI
  38. Ping Zhang, Haixu Liu, Xu Feng, Dunwen Zuo (2025). Comparative simulations of stress modulated properties of SiC and Si during the lapping process. Journal of Materials Research and Technology.DOI
  39. Shuquan Song, Long Liu, Yufeng Sun, Fei Dou, Haoyu Sun, Dunwen Zuo (2025). Magnetorheological preparation using electromagnetic-permanent magnet composite excitation for the fabrication of variable cutting edge. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  40. Haixu Liu, Ping Zhang, Dunwen Zuo (2025). Picosecond laser modification enhances machinability of SiC slices through surface structure evolution. Materials Science and Engineering B.DOI
  41. Ping Zhang, Haixu Liu, Dunwen Zuo (2025). Multiscale simulations of stress field effects on the properties of silicon carbide. Vacuum.DOI
  42. Haixu Liu, Zhipeng Li, Ping Zhang, Dunwen Zuo (2025). Influence of SiC surface/subsurface state on laser ablation thresholds. Materials Science in Semiconductor Processing.DOI
  43. Li Zhu, Zhipeng Li, Di Tian, Haixu Liu, Jinjun Wang, Feng Ying Xu, Dunwen Zuo (2025). Investigation of the structure characteristics and formation mechanisms of pure molybdenum metal alloy induced by laser processing and laser water-assisted processing. Journal of Materials Research and Technology.DOI
  44. 徐朋冲，孙玉利，张桂冠，康诗杰，卢文壮，孙业斌，左敦稳（2024）. 低温微磨料气射流加工的硬脆材料耐冲蚀性能对比. 《金刚石与磨料磨具工程》.
  45. 张桂冠，赵玉刚，赵国勇，高跃武，孟建兵，孙玉利，左敦稳（2024）. 微磨料气射流加工技术研究现状与展望. 《航空制造技术》.
  46. 蔡超利，张丹，郭权，左敦稳（2024）. 基于改进多头绒泡菌算法的布线空间预处理技术. 《机械制造与自动化》.
  47. 王燎原，孙玉利，张桂冠，吴鹏飞，易思广，孙业斌，左敦稳（2024）. 基于Taguchi-GA协同的磁性磨料抛光性能预测及制备工艺参数寻优. 《湖南大学学报(自然科学版)》.
  48. 李高扬，黎向锋，赵康，金玉超，易志东，左敦稳（2024）. 全粒子推动野马优化算法的无人机三维路径规划. 《系统仿真学报》.DOI
  49. 金玉超，黎向锋，梁铖，闫泓驰，王斌，左敦稳（2024）. 考虑物料配送的混流装配线协同优化. 《计算机集成制造系统》.
  50. 蔡中伟，孙玉利，陈法宇，盛一，左敦稳（2024）. 电防锈磨削的加工性能研究. 《金刚石与磨料磨具工程》.
  51. 张丹，蔡超利，徐锋，左敦稳（2024）. “机械制造技术”课程虚拟仿真实验系统设计. 《工业和信息化教育》.
  52. Hao Du, Ke Zhang, Feng Xu, Dun-Wen Zuo, Wenchang Lang (2024). Investigation of arc spot splitting behavior on aluminum, titanium, and their alloy cathodes under different gas flows. Journal of Vacuum Science & Technology A.DOI
  53. Yangyang Zhao, Xianrui Zhao, Xiaoming Chen, Jingfu Song, Yunsong Cui, Fengli Niu, Xunbai Du, Wen-Zhuang Lu, Dun-Wen Zuo (2024). Modeling and analysis of plastic abrasive jet flow characteristics. Journal of Manufacturing Processes.DOI
  54. Shijie Kang, Yu-Li Sun, Fayu Chen, Liao-Yuan Wang, Gui-Guan Zhang, Jia-Le Guo, Dun-Wen Zuo (2024). Experimental study on magnetic ball-assisted magnetic abrasive finishing for irregular spherical internal cavity of waveguide formed by selective laser melting. The International Journal of Advanced Manufacturing Technology.DOI
  55. Fanxuan Yang, Yu-Li Sun, Wu-Lin Fan, Yanlei Liu, Chaoyue Sun, Ye-Bin Sun, Dun-Wen Zuo (2024). Experimental study on abrasive flow finishing of narrow inner cavity of alumina-dispersed copper absorber. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture.DOI
  56. Liao-Yuan Wang, Yu-Li Sun, Zhong-Min Xiao, Li-Ming Yao, Jia-Le Guo, Shijie Kang, Weihao Mao, Dun-Wen Zuo (2024). Experimental Investigation on Magnetic Abrasive Finishing for Internal Surfaces of Waveguides Produced by Selective Laser Melting. Materials.DOI
  57. Shuo Sun, Feng Xu, Shengji Zhou, Xian-Qing Shi, Yuan Liu, Dun-Wen Zuo (2024). Morphology evolution and non-uniformity removal mechanism analysis of diamond nanocone arrays by reactive ion etching. Diamond and related materials.DOI
  58. Cheng-Zuan Gao, Feng Xu, Xian-Qing Shi, Wen-Xuan Zhao, Qian Zhou, Liu Yuan, Qi-Chen Zhan, Dun-Wen Zuo (2024). Enhanced tribo-corrosion resistance of biocompatible TiNbTaZrWC coating through intelligent design strategy. Chemical Engineering Journal.DOI
  59. Xianrui Zhao, Xunbai Du, Zhan-Jiang Li, Dun-Wen Zuo, Yangyang Zhao, Qiang-Yong Zhang, Wen-Zhuang Lu, Feng Xu (2024). Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature. International Journal of Refractory Metals and Hard Materials.DOI
  60. Fanxuan Yang, Yu-Li Sun, Hongfeng Wang, Dun-Wen Zuo (2024). Impact of fluid abrasive viscosity on machining performance. Materials and Manufacturing Processes.DOI
  61. Gui-Zhong Guo, Shusen Hou, Zhan-Kui Wang, Dun-Wen Zuo (2024). In vitro corrosion behavior of PTFE coating on AZ31 by RF magnetron sputtering for biomedical application. Surface Engineering.DOI
  62. Si-Guang Yi, Wen-Zhuang Lu, Xingzhu Du, Zhao Zhang, Chaoyi Wu, Dun-Wen Zuo (2024). High-temperature tribological properties of (TiZrNbMoTa)N and (TiZrNbMoTa)CN ceramic coatings. Wear.DOI
  63. Liao-Yuan Wang, Yu-Li Sun, Zhong-Min Xiao, Fanxuan Yang, Shijie Kang, Yanlei Liu, Dun-Wen Zuo (2024). A Review of Magnetic Abrasive Finishing for the Internal Surfaces of Metal Additive Manufactured Parts. Journal of Manufacturing and Materials Processing.DOI
  64. Xue Li, Pengfei Wu, Nan-Nan Zhu, Dun-Wen Zuo, Yong-Wei Zhu (2024). Effects of chemical action of polishing medium on the material removal of SiC. Precision engineering.DOI
  65. Shuquan Song, Yufeng Sun, Fei Dou, Haoyu Sun, Long Liu, Dunwen Zuo (2024). Formation Mechanism and Quality Assessment of Microstructures Fabricated on PCD Tools by Electrical Discharge Machining. International Journal of Precision Engineering and Manufacturing.DOI
  66. Lisheng Zuo, Youjian Han, Wendeng Shao, Xingquan Zhang, Dunwen Zuo (2024). Revealing microstructure evolution and mechanical properties of Al/Cu joints during high-speed friction stir welding. Journal of Materials Research and Technology.DOI
  67. Haixu Liu, Zhipeng Li, Ping Zhang, Dunwen Zuo, Wenkun Xie (2024). Study of damage mechanism on single crystal 4H-SiC surface layer by picosecond laser modification (PLM). Applied Surface Science.DOI
  68. Zhipeng Li, Mengmeng Jin, Haixu Liu, Dunwen Zuo, Wenkun Xie (2024). The ablation behavior and modification mechanism of SiC under different laser energy. Journal of Materials Research and Technology.DOI
  69. Haixu Liu, Zhipeng Li, Jiejing Li, Huayang Wu, Dunwen Zuo (2024). Removal mechanism on 4H–SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP). Ceramics International.DOI
  70. 赵洋洋，卢文壮，吴泊鋆，孙玉利，左敦稳（2023）. 冲蚀角对碳纤维增强树脂复合材料（CFRP）蒙皮涂层去除及重涂附着力的影响. 《中国表面工程》.
  71. 杨范轩，孙玉利，马杰，范武林，赵建社，盛一，左敦稳（2023）. 航空用不锈钢磨粒流光整加工表面完整性研究. 《南京航空航天大学学报(自然科学版)》.
  72. 徐吉，张丽萍，李露，徐锋，郭魂，晁海涛，左敦稳（2023）. 基于GA-SVM的多规格小批量生产的装配工时估算模型（英文）. Transactions of Nanjing University of Aeronautics and Astronautics.
  73. 孙翔宇，盛一，陈山鹏，左敦稳（2023）. 基于WGAN-GP的轴承健康诊断方法. 《机械制造与自动化》.
  74. 汤张喆，孙玉利，王利峰，朱力敏，柯泰龙，左敦稳（2023）. 伺服交叉孔零件磨粒流去毛刺仿真研究及试验验证. 《航空制造技术》.
  75. 陈文强，张丹，朱锡生，左敦稳（2023）. 基于Cosserat模型和位置动力学的柔性线缆实时仿真. 《机械制造与自动化》.
  76. Wensheng Li, Yiding Zhang, Yan-Wei Xu, Guang-Ming Jiao, Dun-Wen Zuo, Wenting Lu, Quanshi Cheng, Jia-Qiang Yu, Ya-Jun Chen (2023). Effect of post-treated methods on corrosion resistance of MF-DC magnetron sputtering Al coating on TC4. Anti-Corrosion Methods and Materials.DOI
  77. Zhen-Heng Zheng, Sheng-Bin Zhang, Hongzhi Tian, Xiaoyu Chen, Yuqi Wang, Yanhui Li, Dun-Wen Zuo (2023). The Optical Properties of V2O5 Films Deposited on Single Crystal Diamond Under Homogenizing Preparation Technology. Integrated Ferroelectrics.DOI
  78. Shuai-Cheng Tian, Feng Xu, Zhen-Yu Ma, Qianguang Zhou, Yan-Chao Zhao, Zheng Li, Dong Wang, G. Zeng, Dun-Wen Zuo (2023). Effect of the modulation periods on the mechanical and tribological properties of cBN/NCD multilayer composite coating. Diamond and related materials.DOI
  79. Liping Zhang, Feng Xu, Yu Liu, Dan Zhang, Liang Gui, Dun-Wen Zuo (2023). A posture detection method for augmented reality–aided assembly based on YOLO-6D. The International Journal of Advanced Manufacturing Technology.DOI
  80. Jie-Jing Li, Huayang Wu, Haixu Liu, Dun-Wen Zuo (2023). Surface and property characterization of selective laser-melted Ti-6Al-4V alloy after laser polishing. The International Journal of Advanced Manufacturing Technology.DOI
  81. Liao-Yuan Wang, Yu-Li Sun, Fayu Chen, Gui-Guan Zhang, Si-Guang Yi, Dun-Wen Zuo (2023). Investigating the mechanical properties of epoxy resin composites modified by polyamide and nano‐ Al 2 O 3. Journal of Applied Polymer Science.DOI
  82. Liao-Yuan Wang, Yu-Li Sun, Gui-Guan Zhang, Pengfei Wu, Ye-Bin Sun, Dun-Wen Zuo (2023). Investigation on the preparation and finishing performance of a novel nanoparticle-enhanced bonded magnetic abrasive. The International Journal of Advanced Manufacturing Technology.DOI
  83. Xu Liu, Gui-Guan Zhang, Pengchong Xu, Hang Gao, Dun-Wen Zuo, Yu-Li Sun (2023). Generation of micro-channel on PDMS substrate by cryogenic micro-abrasive air-jet machining. The International Journal of Advanced Manufacturing Technology.DOI
  84. Duo-Sheng Li, Qing Feng, Yin Ye, Wu Jiang, Nan Zhao, Dun-Wen Zuo, Feng Xu (2023). Effect of the Interlayer Phase Angle on the Characteristics of Ti-6al-4v Fabricated by Laser Powder Bed Fusion. Social Science Research Network.DOI
  85. Liao-Yuan Wang, Yu-Li Sun, Fayu Chen, Gui-Guan Zhang, Ye-Bin Sun, Dun-Wen Zuo (2023). Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method. The International Journal of Advanced Manufacturing Technology.DOI
  86. Cheng-Zuan Gao, Feng Xu, Xian-Qing Shi, Si-Guang Yi, Qian Zhou, Wen-Xuan Zhao, Yan-Chao Zhao, Dun-Wen Zuo (2023). Effects of carbon doping on microstructure, electrochemical and tribo-corrosion performances of biocompatible TiZrNbTaMoC N coatings. Ceramics International.DOI
  87. Qian Zhou, Feng Xu, Cheng-Zuan Gao, Wen-Xuan Zhao, Lei Shu, Xianqing Shi, Muk-Fung Yuen, Dun-Wen Zuo (2023). Design of high-performance high-entropy nitride ceramics via machine learning-driven strategy. Ceramics International.DOI
  88. Xian-Rui Zhao, Xun-Jun Du, Feng Xu, Dun-Wen Zuo, Zhan-Jiang Li, Wen-Zhuang Lu, Qiang-Yong Zhang (2023). Cutting parameters optimization and cutting performance of Ti(C,N)-based cermets by reactive hot-pressing from Co–Ti–C–BN system in dry turning austenitic stainless steels. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  89. Si-Guang Yi, Wen-Zhuang Lu, Cheng-Zuan Gao, Zhao Zhang, Jiagang Pan, Dong-Xu Zhao, Xingzhu Du, Liao-Yuan Wang, Dun-Wen Zuo (2023). Composition, structure, and wear resistance of (TiZrNbMoTa)C N1- high entropy alloy carbonitride coatings prepared by reactive radio-frequency magnetron sputtering. Surface & Coatings Technology.DOI
  90. Xun-Jun Du, Feng Xu, Xian-Rui Zhao, Yan-Chao Zhao, Zhan-Jiang Li, Dun-Wen Zuo (2023). Reaction Mechanism of Combustion Synthesized ZrC–2ZrB2-Based Cu Cermets. MATERIALS TRANSACTIONS.DOI
  91. Jiejing Li, Huayang Wu, Haixu Liu, Dunwen Zuo (2023). The effect of molten pool evolution on the formation of surface structures during laser polishing. Precision Engineering.DOI
  92. Haixu Liu, Mengmeng jin, Jiejing Li, Zhipeng Li, Dunwen Zuo (2023). Picosecond laser-induced evolution of processing properties of 4H–SiC. Optical Materials.DOI
  93. Ji Xu, Feng Hua Xu, Chenxukun Lou, Liping Zhang, Hun Guo, Dunwen Zuo (2023). An image fusion-based method for recovering the 3D shape of roll surface defects. Measurement Science and Technology.DOI
  94. Huayang Wu, Jiejing Li, Haixu Liu, Dunwen Zuo (2023). Modeling and solving of temperature field of screw–nut pair based on geometric error distribution probability. Numerical Heat Transfer Part B Fundamentals.DOI
  95. Haihong Tang, Yanmin Tang, Yuxiang Su, Wuwei Feng, Bing Wang, Peng Chen, Dunwen Zuo (2023). Feature extraction of multi-sensors for early bearing fault diagnosis using deep learning based on minimum unscented kalman filter. Engineering Applications of Artificial Intelligence.DOI
  96. Huayang Wu, Jiejing Li, Haixu Liu, Dunwen Zuo (2023). Time-varying thermoelastic coupling analysis of heat source of ball screw feed drive system. The International Journal of Advanced Manufacturing Technology.DOI
  97. Xiangyu Guan, Donghai Zhao, Yaxin Yu, Dunwen Zuo, Shuquan Song (2023). Controllable preparation of non-uniform tool edges by magnetorheological finishing. The International Journal of Advanced Manufacturing Technology.DOI
  98. 柯泰龙，孙玉利，汤张喆，马杰，张鹏，左敦稳（2022）. 增材制造异形波导管内腔的磨粒流抛光方法研究. 《航空制造技术》.
  99. 贾昆鹏，徐锋，赵延超，王俊峰，左敦稳（2022）. 基体偏压对Cr/DLC薄膜结构及力学性能的影响. 《机械制造与自动化》.
  100. 钱炳坤，孙玉利，张桂冠，刘旭，高航，左敦稳（2022）. 低温微磨料气射流加工PDMS传热仿真及实验研究. 《南京航空航天大学学报(自然科学版)》.
  101. 张桂冠，孙玉利，范武林，王燎原，杨范轩，盛一，卢文壮，左敦稳（2022）. 钛合金加工表面完整性的研究现状与展望. 《航空制造技术》.
  102. 金玉超，黎向锋，梁铖，闫泓驰，王斌，左敦稳（2022）. 混流装配线协同优化的研究综述. 《现代制造工程》.
  103. 王子旋，黎向锋，高文博，胡嘉琨，徐礼林，左敦稳（2022）. 基于ACS-DE的混合式直线力电机结构优化研究. 《微电机》.
  104. 蔡中伟，孙玉利，徐朋冲，盛一，杜红雨，左敦稳，西川尚宏（2022）. 绿色磨削加工技术研究进展. 《机械制造与自动化》.
  105. 王子旋，黎向锋，肖一秦鹏，胡嘉琨，徐礼林，左敦稳（2022）. 基于Python与Ansoft的混合式直线力电机参数化设计系统研究. 《微特电机》.
  106. Wei-Wei Song, Dun-Wen Zuo, Yungui Shi, Hong-Feng Wang, Jia-Fei Pu (2022). EBSD and Raman Spectroscopy Analysis of Copper Alloy H62/GOp-modified Layer Prepared by Friction Stir Surface Processing. Materials Science.DOI
  107. Fanxuan Yang, Yu-Li Sun, Yaji Wang, Hong-Lei Mo, Li-Min Zhu, Hang Yuan, Bo Lu, Gui-Guan Zhang, Dun-Wen Zuo (2022). Modeling and Experimental Verification of Surface Roughness for Grinding Monocrystalline Silicon Lens. Advanced Theory and Simulations.DOI
  108. Yan-Chao Zhao, Feng Xu, Ji Xu, Duo-Sheng Li, Shuo Sun, Cheng-Zuan Gao, W. Zhao, Wen-Chang Lang, Jun Liu, Dun-Wen Zuo (2022). Effect of the bias-graded increment on the tribological and electrochemical corrosion properties of DLC films. Diamond and related materials.DOI
  109. Yangyang Zhao, Xingzhu Du, Zhuang Yuan, Yu-Li Sun, Dun-Wen Zuo, Wen-Zhuang Lu (2022). Development of coating removal From carbon fiber reinforced plastic skin surfaces by abrasive jet machining. Journal of composite materials.DOI
  110. Yangyang Zhao, Wen-Zhuang Lu, Yan-Song Zhu, Dun-Wen Zuo (2022). Development of erosion equations for removal of organic coating on carbon fiber reinforced polymer surface by plastic abrasive. Journal of Coatings Technology and Research.DOI
  111. Sheng-Bin Zhang, Yan-Hui Li, Nan-Nan Zhu, Dun-Wen Zuo, Yuqi Wang, Xiaoyu Chen (2022). Surface Morphology and Optical Mutation Properties of V2O5 Films Prepared with Different Oxygen Partial Pressures. Integrated Ferroelectrics.DOI
  112. Wei-Wei Song, Dun-Wen Zuo, Yungui Shi, Hong-Feng Wang, Jia-Fei Pu (2022). Analysis of the microstructure and wear resistance of H62/GOp modified layer by friction stir surface processing. Ferroelectrics (Print).DOI
  113. Kuixing Lin, Duo-Sheng Li, Yin Ye, Zhi-Guo Ye, Wu-Gui Jiang, Q. Qin, Dun-Wen Zuo (2022). Corrigendum to “Friction behavior of 2D hydrogenated diamond-like films and bilayer graphene” [Diam. Relat. Mater., 127 (2022) 109179]. Diamond and related materials.DOI
  114. Qian Zhou, Feng Xu, Cheng-Peng Gao, Dan Zhang, Xianqing Shi, Muk-Fung Yuen, Dun-Wen Zuo (2022). Machine learning-assisted mechanical property prediction and descriptor-property correlation analysis of high-entropy ceramics. Ceramics International.DOI
  115. Yangyang Zhao, Wen-Zhuang Lu, Yan-Song Zhu, Dun-Wen Zuo (2022). Pretreatment of aircraft carbon fiber-reinforced plastic skin by plastic abrasive jet machining. Journal of Adhesion Science and Technology.DOI
  116. L. Zuo, Yan Zhang, Rui Hu, Xing-Quan Zhang, Dun-Wen Zuo, Jiajun Nie (2022). Microstructure evolution and mechanical properties on friction stir welding of SiCp/Al composites. Welding International.DOI
  117. Yan-Chao Zhao, Feng Xu, Dan Zhang, Ji Xu, Xianqing Shi, Shuo Sun, Wenxuan Zhao, Cheng-Peng Gao, Dun-Wen Zuo (2022). Enhanced tribological and corrosion properties of DLC/CrN multilayer films deposited by HPPMS. Ceramics International.DOI
  118. Kuixing Lin, Duo-Sheng Li, Yin Ye, Zhi-Guo Ye, Wu-Gui Jiang, Q. Qin, Dun-Wen Zuo (2022). Friction behavior of 2D hydrogenated diamond-like films and bilayer graphene. Diamond and related materials.DOI
  119. Huayang Wu, Dunwen Zuo (2022). Digital map and probability compensation model for repeated positioning error of feed axis. The International Journal of Advanced Manufacturing Technology.DOI
  120. Jie Xiao, Xuefeng Xu, Dunwen Zuo, Shitian Wu, Lin Huang (2022). Effect of contact states in the tube on the push bending with low-melting-point alloy as filling medium. The International Journal of Advanced Manufacturing Technology.DOI
  121. Yaxin Yu, Xiaoyan Ji, Sheng Long Dai, Dunwen Zuo, Shuquan Song (2022). Profile design and simulation verification of hard whirling tool for ZC1 worm machining. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  122. Hongfeng Wang, Weiwei Song, Jiafei Pu, Dunwen Zuo (2022). Analysis on friction stir welding process of 7022 aluminum alloy. Ferroelectrics.DOI
  123. Huayang Wu, Qiang Guan, Chenfei Xi, Dunwen Zuo (2022). Construction of dynamic temperature field model of ball screw based on superposition of positive and negative temperature fields. Numerical Heat Transfer Part A Applications.DOI
  124. Yangyang Zhao, Wenzhuang Lu, Yansong Zhu, Dunwen Zuo (2022). Erosion mechanism and damage behavior of CFRP in plastic abrasive jet machining. The International Journal of Advanced Manufacturing Technology.DOI
  125. Jiejing Li, Yuedong Jin, Yuqing Chang, Dunwen Zuo (2022). Finite element simulation and experimental study of single-laser track in laser polishing of Ti6Al4V. The International Journal of Advanced Manufacturing Technology.DOI
  126. Shuo Sun, Feng Hua Xu, Lili Shi, Shengji Zhou, Yanchao Zhao, Chengzuan Gao, Dunwen Zuo (2022). Lapping performance of diamond cone array tool prepared by double bias assisted HFCVD. Materials Today Communications.DOI
  127. Lisheng Zuo, Wendeng Shao, Xingquan Zhang, Dunwen Zuo (2022). Investigation on tool wear in friction stir welding of SiCp/Al composites. Wear.DOI
  128. 赵先锐，左敦稳，张强勇，刘桂香，杜训柏（2021）. 304不锈钢TIG焊接工艺及数值模拟. 《电焊机》.
  129. 贾昆鹏，王雪，徐锋，施莉莉，赵延超，左敦稳（2021）. 调制比对HiPIMS制备多层DLC薄膜耐腐蚀性能的影响. 《中国表面工程》.
  130. 李泽阳，祝宗煌，左立生，左敦稳，汪洪峰（2021）. 6061铝合金盒体的搅拌摩擦封装温度场研究. 《机械制造与自动化》.DOI
  131. 钱炳坤，孙玉利，张桂冠，刘旭，高航，左敦稳（2021）. 低温微磨料气射流加工微流道专用机床. 《南京航空航天大学学报(自然科学版)》.DOI
  132. 刘敏，杨扬，左敦稳（2021）. 低频条件下二维振动应力释放规律研究. 《机械制造与自动化》.DOI
  133. 王雪，程磊，徐锋，贾昆鹏，左敦稳（2021）. 基于Comsol的矩形磁控溅射靶磁场模拟与分析. 《机械制造与自动化》.DOI
  134. 王子旋，黎向锋，张宇翔，胡嘉琨，徐礼林，左敦稳（2021）. 基于DNN的舵机用永磁式线性力电机驱动力预测模型. 《电机与控制应用》.
  135. 刘宇，徐锋，张丹，阮桥，左敦稳（2021）. 基于增强现实的装配引导技术综述. 《金属加工(冷加工)》.
  136. 祝宗煌，左立生，李泽阳，左敦稳（2021）. 一种搅拌头轴肩临界值的计算方法. 《机械制造与自动化》.
  137. 刘召朝，张丹，周琛，左敦稳（2021）. 基于改进粒子群算法的多分支电缆自动布线技术. 《机械制造与自动化》.DOI
  138. 徐锋，赵延超，张丹，左敦稳（2021）. “新工科”理念下的知识体系和能力培养机制探讨——以机械工程专业为例. 《工业和信息化教育》.
  139. 谢潮，孙翔宇，盛一，左敦稳，陈山鹏（2021）. 机床健康诊断小型分体式系统的设计. 《机械制造与自动化》.DOI
  140. Yan-Song Zhu, Wen-Zhuang Lu, Dun-Wen Zuo, T. Ko, Bangyi Li, Dong Sun (2021). Modeling of strain gradient-dependent strengthening effect in grinding of boron-diffusion-hardened titanium alloy. Journal of Materials Processing Technology.DOI
  141. Si-Guang Yi, Wen-Zhuang Lu, Fan Wu, Peng Ding, Zhao-Kuan Zhang, Yu-Li Sun, Yu-Hong Zou, Xiaoqing Tian, Dun-Wen Zuo (2021). Investigation of rapid composite plating of core wire magnetized electroplated diamond wire saw.DOI
  142. Duo-Sheng Li, W. Zou, Shengli Song, Yin Ye, Zhi-Guo Ye, Q. Qin, Dun-Wen Zuo, Wen-Zhuang Lu (2021). Graphene with reciprocating carbon chains for long-term corrosion protection.DOI
  143. Gui-Guan Zhang, Yu-Li Sun, Hang Gao, Xu Liu, Dun-Wen Zuo (2021). PDMS material embrittlement and its effect on machinability characteristics by cryogenic abrasive air-jet machining. Journal of Manufacturing Processes.DOI
  144. Gui-Guan Zhang, Yu-Li Sun, Xu Liu, Liao-Yuan Wang, Dun-Wen Zuo (2021). Prediction of erosion volume of PDMS by cryogenic micro-abrasive jet machining based on dimensional analysis method and experimental verification. The International Journal of Advanced Manufacturing Technology.DOI
  145. Liaoyuan Wang, Yuli Sun, Fayu Chen, Guiguan Zhang, Peng Zhang, Dunwen Zuo (2021). Experimental study on vibration-assisted magnetic abrasive finishing for internal blind cavity by bias external rotating magnetic pole. Precision Engineering.DOI
  146. Guiguan Zhang, Yuli Sun, Hang Gao, Xu Liu, Dunwen Zuo (2021). Characteristics of cryogenic abrasive air-jet direct-write machining: A comparison with abrasive air-jet direct-write machining at oblique angles. Journal of Materials Processing Technology.DOI
  147. Guiguan Zhang, Yuli Sun, Xu Liu, Hang Gao, Dunwen Zuo (2021). Experimental investigations of machining characteristics on polydimethylsiloxane (PDMS) by cryogenic abrasive air-jet machining. The International Journal of Advanced Manufacturing Technology.DOI
  148. Guiguan Zhang, Yuli Sun, Hang Gao, Dunwen Zuo, Xu Liu (2021). A theoretical and experimental investigation of particle embedding and erosion behaviour of PDMS in micro-abrasive air-jet machining. Wear.DOI
  149. Jun Li, Cheng Wu, Shun Ming, Yongwei Zhu, Dunwen Zuo (2021). Damage Control of Ultra-Thin YAG Crystal in Nano-Machining Process. Integrated ferroelectrics.DOI
  150. Taowen Wu, Ning Wang, Minghe Chen, Dunwen Zuo, Lansheng Xie, Wenxiang Shi (2021). Effect of Pre-Strain on Microstructure and Tensile Properties of Ti-6Al-4V at Elevated Temperature. Metals.DOI
  151. Caizi Xiong, Duosheng Li, Shengli Song, Yin Ye, Zhiguo Ye, Dunwen Zuo (2021). Research on the performance of rGO-CNTs synergistically enhanced copper matrix composites. Powder Technology.DOI
  152. Ze Yu, Yuli Sun, Guiguan Zhang, Wenzhuang Lu, Dunwen Zuo (2021). Experimental study on machining germanium wafer with ice particle, fixed abrasive tools. The International Journal of Advanced Manufacturing Technology.DOI
  153. Jinfang Wang, Dunwen Zuo, Liu Zhu, Zhibiao Tu, Lin Xiao, Yinan Wu, Weiwei Li, Xiaoqiong Zhang (2021). Effect of Y2O3 Addition on High-Temperature Oxidation of Binderless Tungsten Carbide. Frontiers in Materials.DOI
  154. Weida Lou, Guohua Qin, Dunwen Zuo (2021). Investigation on Cotes-formula-based prediction method and its experimental verification of milling stability. Journal of Manufacturing Processes.DOI
  155. Jiejing Li, Dunwen Zuo (2021). Laser polishing of additive manufactured Ti6Al4V alloy: a review. Optical Engineering.DOI
  156. Ze Yu, Dunwen Zuo, Yuli Sun, Jianshe Zhao, Xuemei Chen, Kaibo Shi, Wei Chen (2021). Study on EDM technology of distributed group electrodes in titanium alloy with large inclined angle and thin-walled group holes. The International Journal of Advanced Manufacturing Technology.DOI
  157. 宋波，翟洋洋，左敦稳，邓永芳（2020）. Al/Mg异种合金搅拌摩擦焊的材料流动可视化和数值模拟研究（英文）. 《稀有金属材料与工程》.
  158. 李泽阳，祝宗煌，左敦稳，左立生，汪洪峰（2020）. 铝合金盒体的搅拌摩擦焊封装. 《焊接》.
  159. 邱哲睿，邓永芳，刘赣华，左敦稳（2020）. 铝/钢异种材料搅拌摩擦焊接研究现状及发展. 《特种铸造及有色合金》.DOI
  160. 涂禄强，徐锋，田帅，许晨辉，王雪，高继业，左敦稳（2020）. 立方氮化硼涂层刀具制备及切削性能研究现状. 《机械制造与自动化》.
  161. 明舜，李军，张羽驰，邱阳，朱永伟，左敦稳（2020）. 磨粒尺寸和基体硬度对固结磨料抛光YAG晶体的影响. 《金刚石与磨料磨具工程》.DOI
  162. 李岚，左敦稳，侯源君，顾胜宇，刘敏（2020）. 基于有限元分析的二维振动法应力释放装置设计. 《机械制造与自动化》.
  163. 王维，张丹，胡曾一震，左敦稳（2020）. 面向AR辅助维修的3D物体识别技术. 《机械制造与自动化》.
  164. Yuanjun Hou, Dun-Wen Zuo, Le Wang, Lan Li (2020). Experimental evaluation for internal trapezoidal thread with axial ultrasonic vibration cutting of Ti–6Al–4V. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  165. Xian-Rui Zhao, Zhan-Jiang Li, Qin-Tao Li, Dun-Wen Zuo, Qiang-Yong Zhang, Zheng-Yu Zhu, Gui-Xiang Liu, Yong Chen, Feng Xu (2020). Reaction Process and Influence of WC Content on Microstructure and Mechanical Properties of Ti(C, N)-Based Cermets. MATERIALS TRANSACTIONS.DOI
  166. Xian-Rui Zhao, Meng-Xian Zhang, Dun-Wen Zuo, Yi-Hang Fang, Qiang-Yong Zhang, Zheng-Yu Zhu, Gui-Xiang Liu, Feng Xu (2020). Ti(C,N)-based cermet with different TaC/(TaC+WC) weight ratio by in-situ reactive hot pressing: Microstructure and mechanical properties.DOI
  167. Yan-Song Zhu, Jun Wu, Wen-Zhuang Lu, Dun-Wen Zuo, He-Ping Xiao, Da-Wei Cao, T. Ko (2020). Surface Formation Mechanics and its Microstructural Characteristics of AAJP of Aluminum Alloy by Using Amino Thermosetting Plastic Abrasive. International Journal of Precision Engineering and Manufacturing - Green Technology.DOI
  168. Lili Shi, Feng Xu, Jiye Gao, Muk-Fung Yuen, Shuo Sun, Ji Xu, Kun Jia, Dun-Wen Zuo (2020). Nanostructured boron-doped diamond electrode for degradation of the simulation wastewater of phenol. Diamond and related materials.DOI
  169. L. Zuo, Xian-Rui Zhao, Zeyang Li, Dun-Wen Zuo, Hong-Feng Wang (2020). A review of friction stir joining of SiCp/Al composites.DOI
  170. Gui-Guan Zhang, Yu-Li Sun, Bingkun Qian, Hang Gao, Dun-Wen Zuo (2020). Experimental study on mechanical performance of polydimethylsiloxane (PDMS) at various temperatures. Polymer testing.DOI
  171. Yan-Song Zhu, Yu-Xuan Yin, Jun Wu, Yun-Fei Liu, Wen-Zhuang Lu, Dun-Wen Zuo, He-Ping Xiao, Da-Wei Cao, T. Ko (2020). Effect of RE on accelerating the kinetics of boride layer growth on titanium alloy.DOI
  172. Zhao-Kuan Zhang, Wen-Zhuang Lu, Wei Feng, Xingzhu Du, Dun-Wen Zuo (2020). Effect of substrate surface texture on adhesion performance of diamond coating.DOI
  173. Hongfeng Wang, Dunwen Zuo, Shengrong Liu, Jiafei Pu, Weiwei Song (2020). Performance Analysis of Friction Stir Welded Lightweight Aluminum Alloy Sheet. Journal of Engineering and Technological Sciences.DOI
  174. Ze Yu, Dunwen Zuo, Yuli Sun, Guohua Li, Xuemei Chen, Jianshe Zhao, Kaibo Shi (2020). Study on the improvement of the surface integrity and efficiency of electrical-discharge-machined TC4 titanium alloy via abrasive flow machining. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  175. Jie Xiao, Xuefeng Xu, Dunwen Zuo, Yubin Fan, Kongwei Wu (2020). Influences on the extended length and performance of push bending for the GH4169 superalloy tube with small bending radius of 1D. The International Journal of Advanced Manufacturing Technology.DOI
  176. Yuan-Jun Hou, Dunwen Zuo, Yuli Sun, Ze-Nan Liao (2020). Semi-analytical torque modeling of Ti-6Al-4V-alloy internal trapezoidal thread extrusion forming with an emphasis on low-frequency torsional vibration. Journal of Materials Processing Technology.DOI
  177. Luqiang Tu, Shuai Tian, Feng Hua Xu, Xue Wang, Chenhui Xu, Bin He, Dunwen Zuo, Wenjun Zhang (2020). Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron. Journal of Manufacturing Processes.DOI
  178. Duosheng Li, Shengli Song, Dunwen Zuo, Wenzheng Wu (2020). Effect of Pore Defects on Mechanical Properties of Graphene Reinforced Aluminum Nanocomposites. Metals.DOI
  179. Haichao Ye, Qin Guo-hua, Wang Huamin, Zuo Dunwen, Xiong Han (2020). A machining position optimization approach to workpiece deformation control for aeronautical monolithic components. The International Journal of Advanced Manufacturing Technology.DOI
  180. 崔晓飞，左敦稳，孙玉利，侯源君，廖泽南，叶赵伟（2019）. 梯形螺纹振动辅助冷挤压工艺参数影响分析. 《南京航空航天大学学报(自然科学版)》.DOI
  181. 娄元帅，孙玉利，王亚霁，公正，刘志刚，左敦稳（2019）. 低温磨料气射流加工PDMS实验研究. 《南京航空航天大学学报(自然科学版)》.DOI
  182. 王华敏，秦国华，林锋，左敦稳，韩雄，陈雪梅（2019）. 面向7075-T7451铝合金厚板加工变形控制的变向迭代优化方法. 《稀有金属材料与工程》.
  183. 叶海潮，秦国华，林锋，左敦稳，吴竹溪，罗育果（2019）. 面向7075铝厚板加工变形的初始残余应力释放与再分布模型. 《稀有金属材料与工程》.
  184. 朱永成，左敦稳，李泽阳，左立生（2019）. 纳米SiC对2024铝合金搅拌摩擦焊的影响研究. 《热加工工艺》.DOI
  185. 施凯博，孙玉利，余泽，李国华，左敦稳（2019）. 钛合金磨料流光整加工表面完整性研究. 《表面技术》.
  186. 王健杰，李军，黄俊阳，明舜，朱永伟，左敦稳（2019）. 球形固结磨料磨头研磨TC4钛合金的工艺探索. 《金刚石与磨料磨具工程》.DOI
  187. 耿琪，张丹，刘召朝，左敦稳（2019）. 面向机电产品布线规划的空间预处理技术. 《航空精密制造技术》.
  188. 崔晓飞，左敦稳，孙玉利，侯源君，廖泽南（2019）. 梯形螺纹振动辅助冷挤压机床的激振装置作用探究. 《航空制造技术》.DOI
  189. 叶赵伟，左敦稳，左立生（2019）. 基于多传感器技术的搅拌摩擦焊在线监测系统开发. 《机床与液压》.
  190. 赵路，孙玉利，施凯博，赵建社，左敦稳（2019）. 整体叶盘磨粒流加工仿真与试验研究. 《航空制造技术》.DOI
  191. 李露，徐锋，张超，吴金鑫，张丹，左敦稳（2019）. 基于CBR和BP神经网络的壳体零件制造工时定额技术研究. 《机械制造与自动化》.DOI
  192. 许晨辉，徐锋，施莉莉，高继业，王雪，左敦稳（2019）. 基于纳秒激光加工技术的表面织构工艺参数研究. 《机械制造与自动化》.DOI
  193. 刘俨后，麻娟，左敦稳，李学伟（2019）. 基于改进烟花算法的随机装配线混流调度. 《控制与决策》.DOI
  194. 晁海涛，徐锋，许晨辉，李露，左敦稳（2019）. 复杂机电产品装配工时定额计算方法研究. 《机械制造与自动化》.
  195. Jun Li, Jun-Yang Huang, Cheng-Xu Hua, Jianjie Wang, Yong Zhu, Dun-Wen Zuo (2019). Design of surface grooves on a polishing pad based on slurry uniform flow. The International Journal of Advanced Manufacturing Technology.DOI
  196. Chenhui Xu, Feng Xu, Lili Shi, Jiye Gao, Luqiang Tu, Dun-Wen Zuo (2019). Enhancement of substrate-coating adherence of boron-doped diamond electrodes by nanosecond laser surface texturing pretreatment. Surface & Coatings Technology.DOI
  197. Jia-Lin Shen, Yuangang Lu, Hai-Xiao Ma, Ji-Ming Wang, Feng Xu, Dun-Wen Zuo (2019). Nonlinear Laser-Limiting Method Based on One-Dimensional Photonic Crystals with Double Defects. Chinese Journal of Lasers.DOI
  198. Jun Li, Yong-Kai Tang, Long-Long Song, Yong Zhu, Dun-Wen Zuo (2019). Effect of FAP characteristics on fixed abrasive polishing of CaF2 crystal. International Journal of Nanomanufacturing.DOI
  199. Yixiang Xu, Yuangang Lu, Yu-Jie Zuo, Feng Xu, Dun-Wen Zuo (2019). Z-scan measurements of nonlinear refraction and absorption for aluminum-doped zinc oxide thin film. Applied Optics.DOI
  200. Shuquan Song, Bin Lu, Dunwen Zuo, Hai Lun Zhou, Zhen Lei, Feng Zhou (2019). A new cutting edge surface reconstruction method for hard whirling tools. Measurement.DOI
  201. Yuan-Jun Hou, Dunwen Zuo, Yuli Sun, Le Wang, Lan Li (2019). Distributional analysis of residual stresses with the Ti-6Al-4V internal trapezoidal thread torsional vibration extrusion. The International Journal of Advanced Manufacturing Technology.DOI
  202. Luqiang Tu, Feng Hua Xu, Xue Wang, Jiye Gao, Shuai Tian, Muk‐Fung Yuen, Dunwen Zuo (2019). Temperature distribution of cubic boron nitride–coated cutting tools by finite element analysis. The International Journal of Advanced Manufacturing Technology.DOI
  203. Jiye Gao, Feng Hua Xu, Zhenyu Ma, Lili Shi, Xue Wang, Dunwen Zuo (2019). Adherent diamond coating deposited on Ti by ultrasonic after carbonization pretreatment. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  204. Shuai Tian, Feng Hua Xu, Sheng Sun, Yuquan Zhao, Xiang Wang, Dunwen Zuo (2019). Growth rate and surface free energy of diamond films using different gas-sources. Surface Engineering.DOI
  205. Duosheng Li, Wei Zou, Shengli Song, Yin Ye, Wugui Jiang, Qing‐Hua Qin, Yi Xiao, Zhiguo Ye, Liang Chen, Dunwen Zuo (2019). Selective coupling reaction inhibits graphene defects: regulating the orderly precipitation of carbon atoms. Applied Nanoscience.DOI
  206. Zhao Zhang, Wenzhuang Lu, Wei Liu, Dunwen Zuo (2019). Friction-reducing effect and damage mechanism of laser micro-texture on diamond films during friction. Modern Physics Letters B.DOI
  207. Weiwei Song, Dunwen Zuo, Xiaojing Xu, Hongfeng Wang, Shengrong Liu (2019). Electrochemical Corrosion Performance of FSSP-Modified Copper Alloy Surface. International Journal of Electrochemical Science.DOI
  208. Shuai Tian, Feng Hua Xu, Peng Ye, Jinxin Wu, Luqiang Tu, Dunwen Zuo, Yuangang Lu (2019). The effect of deposition parameters on microstructure and properties of cBN films by linear ion source assisted RFMS. Integrated ferroelectrics.DOI
  209. Ryo NAGAOKA, Yuya Kobaru, Dunwen Zuo, Rintaro KYODA, Kazuya Yamashita (2019). Tool wear characteristics in cutting of hypereutectic Al-Si alloy. The Proceedings of Conference of Kyushu Branch.DOI
  210. Wanshan Tian, Yu Shouxin, Pang Jing, Wei Liu, Zuo Dunwen, Lu Wenzhuang (2019). Mathematical model of sapphire micromachining by CVD diamond coating tool. Integrated ferroelectrics.DOI
  211. Wang Huamin, Qin Guo-hua, Wu Zhuxi, Zuo Dunwen (2019). A workpiece stability-based iterative planning of clamping forces for fixturing layout specification of a complex workpiece. The International Journal of Advanced Manufacturing Technology.DOI
  212. Yu Shouxin, Zhao Zhang, Lu Wenzhuang, Zuo Dunwen (2019). Effect of deposition parameters on crystalline of CVD diamond. Integrated ferroelectrics.DOI
  213. Hongfeng Wang, Zuo Dunwen, Liu Shengrong, Weiwei Song (2019). Analysis of metallographic structure and hardness of magnesium alloy area using friction stir welding. Advanced Composites Letters.DOI
  214. 娄元帅，孙玉利，刘志刚，卢文壮，左敦稳（2018）. 低温磨料气射流加工装置的研制与实验验证. 《南京航空航天大学学报(自然科学版)》.
  215. 叶赵伟，朱永成，左敦稳，左立生（2018）. 基于声发射技术的搅拌摩擦焊接工具磨损监测. 《南京航空航天大学学报(自然科学版)》.
  216. L. Zuo, Dun-Wen Zuo, Yongcheng Zhu, Hong-Feng Wang (2018). Acoustic emission analysis for tool wear state during friction stir joining of SiCp/Al composite. The International Journal of Advanced Manufacturing Technology.DOI
  217. Jun Li, Cheng-Xu Hua, Long-Long Song, Yong Zhu, Dun-Wen Zuo (2018). Optimization of process parameters with Taguchi method for nano machining CaF2 crystal.DOI
  218. L. Zuo, Dun-Wen Zuo, Yongcheng Zhu, Hong-Feng Wang (2018). Effect of process parameters on surface topography of friction stir welding. The International Journal of Advanced Manufacturing Technology.DOI
  219. Nan-Nan Zhu, Yong Zhu, Jun Xu, Zhan-Kui Wang, Sheng Xu, Dun-Wen Zuo (2018). Modeling and Validation of Indentation Depth of Abrasive Grain into Lithium Niobate Wafer by Fixed-Abrasive Lapping.
  220. Suyang Tang, Yu-Li Sun, Yong Wang, Jun Li, Yang Xu, Zhigang Liu, Yong Zhu, Dun-Wen Zuo (2018). Subsurface Damage of Monocrystalline Germanium Wafers by Fixed and Free Abrasive Lappings.
  221. Ya-Feng He, Wen-Zhuang Lu, W. Gan, Jian-She Zhao, Dun-Wen Zuo (2018). Polarization of Ti6Al4V alloy in NaBr electrolyte and surface fractal analysis.DOI
  222. Hong Yan Miao, Xiang Shan, Shanwen Zhang, Yifu Jin, Dunwen Zuo (2018). Process Online Monitoring on Cold Extrusion of Internal Thread in High-strength Steel. MANUFACTURING TECHNOLOGY.DOI
  223. Shuai Tian, Feng Hua Xu, Ye Peng, Jinxin Wu, Yousheng Zou, Dunwen Zuo (2018). Deposition of cubic boron nitride films by anode layer linear ion source assisted radio frequency magnetron sputtering. Thin Solid Films.DOI
  224. Jing Pang, Wenzhuang Lu, Wei Liu, Sheng Zhang, Yuli Sun, Dunwen Zuo (2018). Diffusion of carbon and nitrogen in TC4 titanium alloy plasma electrolytic saturation. Chemical Physics.DOI
  225. Yuli Sun, Songhao Tang, Wei Lü, Jian Li, Dunwen Zuo (2018). Research on ice fixed-abrasive polishing mechanism and technology for high-definition display panel glass. International Journal of Nanomanufacturing.DOI
  226. Tang Suyang, Sun Yuli, Lou Yuanshuai, Yang Xu, Lu Wenzhuang, Jun Li, Zuo Dunwen (2018). Study on the influence of ambient temperature on surface/subsurface damage of monocrystalline germanium lapping wafer. Procedia CIRP.DOI
  227. 李佶，黎向锋，陈冠宇，左敦稳，孙业斌，李敏，朱长发（2017）. 不同硬度301型不锈钢带材双轴柔性滚弯成形过程仿真及实验. 《塑性工程学报》.
  228. 张林，马乐娟，薛海鹏，卢文壮，左敦稳（2017）. 硬质合金刀具表面微/纳米金刚石复合涂层制备研究. 《机械制造与自动化》.
  229. 刘森，卢文壮，闫鹏庆，潘韩飞，左敦稳（2017）. Ti-Si-C涂层刀具切削淬火钢性能研究. 《机械制造与自动化》.
  230. 廖泽南，左敦稳，孙玉利，侯源君，李岚，崔晓飞（2017）. 不锈钢梯形内螺纹振动辅助冷挤压试验探究. 《南京航空航天大学学报(自然科学版)》.
  231. Yan-Song Zhu, Wen-Zhuang Lu, Yu-Li Sun, Dun-Wen Zuo (2017). Grinding characteristics in high-speed grinding of boron-diffusion-hardened TC21-DT titanium alloy with vitrified CBN wheel.DOI
  232. Fangzhi Zheng, Nan-Nan Zhu, Yong Zhu, Xinlu Li, Jun Li, Dun-Wen Zuo (2017). Self-conditioning performance of hydrophilic fixed abrasive pad.DOI
  233. Jun Li, Jian-Dong Huang, Lei Xia, Yong Zhu, Dun-Wen Zuo (2017). Effect of chemical additive on fixed abrasive pad self-conditioning in CMP.DOI
  234. Sheng-Bin Zhang, Nan-Nan Zhu, Dun-Wen Zuo, Wen-Zhuang Lu (2017). Structural and optical properties of vanadium pentoxide nano-thin films with different thickness.DOI
  235. Jinfang Wang, Dunwen Zuo, Liu Zhu, Weiwei Li, Zhibiao Tu, Sheng Long Dai (2017). Effects and influence of Y 2 O 3 addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering. International Journal of Refractory Metals and Hard Materials.DOI
  236. Hong Yan Miao, Qing Mei, Jingyun Yuan, Shanwen Zhang, Yifu Jin, Dunwen Zuo (2017). Numerical Simulation and Experimental Research on Cold Form Tapping Process of Internal Thread. MANUFACTURING TECHNOLOGY.DOI
  237. Weiwei Song, Xiaojing Xu, Dunwen Zuo, Jianli Wang, Gang Wang (2017). Effect of Processing Parameters and Temperature on Sliding Wear of H62 Copper Alloy Modified by Friction Stir Surface Processing. Materials Science.DOI
  238. Jun Li, Yongkai Tang, Chengxu Hua, Taiyu Guo, Yongwei Zhu, Dunwen Zuo (2017). Effect of process parameters on fixed abrasive pad self-conditioning in micro/nano machining. Integrated ferroelectrics.DOI
  239. Yunliang Sun, Songhao Tang, Yi Xu, Z. G. Liu, Weixue Lu, Jian Li, Dunwen Zuo (2017). Study on dispersion property of sub-micro α-Al2O3 powders in water suspension by physical-chemical process. Integrated ferroelectrics.DOI
  240. Ye Peng, Feng Hua Xu, Jinxin Wu, Shuai Tian, Xianrui Zhao, Xiaolong Tang, Dunwen Zuo (2017). Effects of anode layer linear ion source on the microstructure and mechanical properties of amorphous carbon nitride films. Surface and Coatings Technology.DOI
  241. Jinxin Wu, Feng Hua Xu, Ye Peng, Tang Xiaolong, Zuo Dunwen (2017). The effects of nitrogen partial pressure on the microstructure of amorphous carbon nitride films. Integrated ferroelectrics.DOI
  242. 宋龙龙，李军，王文泽，胡章贵，朱永伟，左敦稳（2016）. 固结磨料抛光LBO晶体非水基抛光液优化. 《功能材料》.
  243. 汪洪峰，汪建利，左敦稳，宋娓娓，吉玲（2016）. TC11/TC17异质钛合金线性摩擦连接区疲劳性能分析. 《焊接学报》.
  244. 宋波，左敦稳，邓永芳（2016）. 2024铝合金搅拌摩擦连接作用力幅值及周期性. 《焊接学报》.
  245. 王彩勇，黎向锋，左敦稳，陈冠宇，李佶，李敏，朱长发（2016）. 开缝衬套冷挤压孔疲劳寿命仿真模型建立及验证. 《兵器材料科学与工程》.
  246. 陈思彪，左敦稳，孙玉利，吉玲，邓永芳（2016）. 2024-T3铝合金搅拌摩擦连接接头力学性能研究. 《机械制造与自动化》.
  247. 吕程昶，孙玉利，王勇，郭凌曦，朱力敏，袁航，左敦稳（2016）. 双转盘偏心槽球体研磨均匀性定量评价方法. 《南京航空航天大学学报(自然科学版)》.
  248. 唐晓龙，徐锋，徐俊华，叶鹏，吴海兵，左敦稳（2016）. 掺硼金刚石/硬质合金膜基结合和摩擦磨损性能的研究. 《功能材料》.
  249. 邵雳，孙玉利，吕程昶，夏保红，王勇，左敦稳（2016）. 亚微米SiC在水相介质中的分散性能. 《南京航空航天大学学报(自然科学版)》.
  250. Luchengchang, Yu-Li Sun, Yong Wang, Ling-Xiao Guo, Li-Ming Zhu, Hang Yuan, Dun-Wen Zuo（2016）. 二重回転円板の球面研磨均一性の定量的評価法【JST・京大機械翻訳】.
  251. H. Miao, Qing Mei, Jing-Yun Yuan, Zai-Xiang Zheng, Yi-Fu Jin, Dun-Wen Zuo (2016). Low cycle fatigue and strengthening mechanism of cold extruded large diameter internal thread of Q460 steel. Chinese Journal of Mechanical Engineering.DOI
  252. Sheng-Bin Zhang, Dun-Wen Zuo, Xing Liu, Wen-Gang Lu, Feng Xu (2016). Broadband laser protection method and structure.
  253. Jian-Dong Huang, Jun Li, Long-Long Song, Cheng-Xu Hua, Zhang-Gui Hu, Yong Zhu, Dun-Wen Zuo（2016）. 硫化亜鉛結晶の固定研磨剤研磨に及ぼす種々の酸性及びアルカリ性スラリーの影響【Powered by NICT】.
  254. Yong-Wei Zhu, Qi Shen, Zi-Kun Wang, Shun-Zhi Ling, Jun Li, Dun-Wen Zuo（2016）. 多結晶ダイヤモンド強化研磨剤研磨パッドの石英ガラスの性能探索【JST・京大機械翻訳】.
  255. Sheng-Bin Zhang, Dun-Wen Zuo, Wen-Zhuang Lu, Yang-Ping Zuo (2016). Optical and Electrical Properties of Vanadium Pentoxide Films Deposited on Different Substrates.DOI
  256. Xian-Rui Zhao, Dun-Wen Zuo, Meng-Xian Zhang, Feng Xu, Shangshen Feng（2016）. Co‐Ti‐C‐BN系から反応性ホットプレスによる極微細Ti(C,N)‐TiB2‐Coサーメットのその場製造.
  257. Yong Zhu, Shen Qi, Zi-Kun Wang, Shun-Zhi Ling, Jun Li, Dun-Wen Zuo (2016). Lapping performance on quartz glass of fixed abrasive pad embedded with multi-grain diamond grits.DOI
  258. Nan-Nan Zhu, Fangzhi Zheng, Yong Zhu, Sheng Xu, Dun-Wen Zuo (2016). Research of abrasive embedment-free lapping on soft-brittle lithium niobate wafer. The International Journal of Advanced Manufacturing Technology.DOI
  259. Yan Zhao, Dun-Wen Zuo, Yu-Li Sun, Min Wang (2016). Experimental study on multi-layer ice fixed abrasive polishing of single crystal germanium wafer.DOI
  260. Jun Li, Long-Long Song, Jian-Dong Huang, Yong-Kai Tang, Yong Zhu, Dun-Wen Zuo (2016). Effect of alkaline slurries on nano machining CaF2 crystal.DOI
  261. Jian-Dong Huang, Jun Li, Long-Long Song, Cheng-Xu Hua, Zhang-Gui Hu, Yong Zhu, Dun-Wen Zuo (2016). Influence of Different Acid and Alkaline Slurry on Fixed Abrasive Polishing of Zinc Sulfide Crystal.
  262. Hongjun Wang, Dunwen Zuo, Feng Hua Xu, Wenzhuang Lu (2016). Fabrication of Nano-Crystalline Diamond Duplex Micro-Gear by Hot Filament Chemical Vapor Deposition. MATERIALS TRANSACTIONS.DOI
  263. Bin Tang Yang, Wenzhuang Lu, Wei Feng, Yang Xu, Dunwen Zuo (2016). Adsorption and deposition of micro diamond particles in preparing diamond magnetic abrasives by electroless composite plating. Diamond and Related Materials.DOI
  264. Yansong Zhu, Wei Lü, Dunwen Zuo, Dawei Cao (2016). A novel rare earth-salt bath nitriding of TC21-DT titanium alloy. Surface Engineering.DOI
  265. Hongfeng Wang, Jianli Wang, Weiwei Song, Dunwen Zuo, Ding-lin Shao (2016). Analysis on the Corrosion Performance of Friction Stir Welding Joint of 7022 Aluminum Alloy. International Journal of Electrochemical Science.DOI
  266. Wei Feng, Wenzhuang Lu, Hai Lun Zhou, Bin Tang Yang, Dunwen Zuo (2016). Surface characterization of diamond film tool grinding on the monocrystal sapphire under different liquid environments. Applied Surface Science.DOI
  267. Yansong Zhu, Wei Lü, Yuli Sun, Rabin Basnet, Dunwen Zuo (2016). Effect of rare earth addition on diffusion kinetics of borided TC21-DT titanium alloy. Surface Engineering.DOI
  268. Weiwei Song, Xiaojing Xu, Dunwen Zuo, Jianli Wang (2016). Study on the corrosion of copper alloy by friction stir surface processing. Anti-Corrosion Methods and Materials.DOI
  269. Ling Kang Ji, Dunwen Zuo, M. Wang (2016). Force response characteristics and mechanical properties of friction stir welded AA2024 sheets. Materials Science and Technology.DOI
  270. Xianrui Zhao, Dunwen Zuo, Mengxian Zhang, Feng Hua Xu, Jinfang Wang, Shangshen Feng (2016). Effect of Sintering Temperature on the Microstructure and Properties of Ultra-Fine Ti(C,N)-Based Cermets. MATERIALS TRANSACTIONS.DOI
  271. Xianrui Zhao, Dunwen Zuo, Mengxian Zhang, Feng Hua Xu, Shangshen Feng (2016). Influence of applied pressure on the microstructure and properties of Ti(C,N)–TiB2–Co cermets prepared in situ by reactive hot-pressing. Journal of the Ceramic Society of Japan.DOI
  272. Sheng Long Dai, Dunwen Zuo, Chun Fang, Liu Zhu, Cheng Hu, Yuxin Gao, Weiwei Li (2016). Characteration of Laser Cladded Fe-Mn-Cr Alloy Coatings Modified by Plasma Nitriding. MATERIALS TRANSACTIONS.DOI
  273. Ye Peng, Feng Hua Xu, Tang Xiaolong, Haibin Wu, Lu Wenzhuang, Ying Liu, Zuo Dunwen (2016). Study on preparation and properties of mesh Ti/BDND electrode. Integrated ferroelectrics.DOI
  274. 蔡文俊，卢文壮，王晗，朱延松，左敦稳（2015）. TC21钛合金稀土渗硼强化表面组织及性能. 《航空学报》.
  275. 闫鹏庆，卢文壮，刘森，潘韩飞，张吴晖，左敦稳（2015）. TC4钛合金直流液相等离子体法强化层的生长. 《中国表面工程》.
  276. 李建忠，黎向锋，左敦稳，许瑞华，陈竹（2015）. 模拟研究离焦量对7050铝合金Al/Ti熔覆过程的影响. 《红外与激光工程》.
  277. 李多生，吴文政，QIN Qing-hua，周贤良，左敦稳，鲁世强，郜友彬（2015）. 石墨烯/Al复合材料的微观结构及力学性能. 《中国有色金属学报》.
  278. 陈竹，黎向锋，左敦稳，李建忠，许瑞华（2015）. 激光工艺参数对7050铝合金Al/Ti熔覆温度场影响规律的模拟. 《材料科学与工程学报》.
  279. 黄宇峰，左敦稳，徐锋，罗伟（2015）. 基于刀具磨损的钛合金薄壁件加工变形研究. 《机械制造》.
  280. 秦国华，林锋，左敦稳（2015）. 基于材料非均匀性铝厚板预拉伸残余应力的预测方法. 《中国有色金属学报》.
  281. 宋娓娓，汪洪峰，汪建利，左敦稳，黎向锋，田昕（2015）. 焊接顺序对焊接变形的影响分析. 《焊接技术》.
  282. 吉玲，左敦稳，邓永芳，王珉（2015）. 外界因素对焊接咬边问题的影响规律. 《材料热处理学报》.
  283. 吴海兵，徐锋，刘召志，周春，卢文壮，左敦稳 (2015). Preparation of Large-Scale Double-Side BDD Electrodes and Their Electrochemical Performances. Transactions of Nanjing University of Aeronautics and Astronautics.
  284. Mengjun Zhang, Yu-Li Sun, Dun-Wen Zuo, Chun-Xiang Xie, Chun-Ming Zhang (2015). Experimental Study on Slicing of Sapphire with Fixed Abrasive Diamond Wire Saw.
  285. Jun Li, Wenze Wang, Zhang-Gui Hu, Yong Zhu, Dun-Wen Zuo (2015). Effect of Chemical Additive on Fixed Abrasive Polishing of LBO Crystal with Non-water Based Slurry.
  286. Wei Feng, Wen-Zhuang Lu, Wei-Wei Li, Bin-Hua Yang, Xu Yang, Wu-Hu Zhang, Yu-Li Sun, Dun-Wen Zuo (2015). Sapphire ball cover grinding tool based on controlled structure CVD diamond film.
  287. Jun Li, Hui-Min Wang, Wenze Wang, Jian-Dong Huang, Yong-Wei Zhu, Dun-Wen Zuo (2015). Model of Surface Roughness in Fixed Abrasive Lapping of K9 Glass.
  288. 赵研，左敦稳，孙玉利，王珉 (2015). Effect of Heat-Insulating Layer Thickness on Melting Rate of Ice Fixed Abrasives Polishing Pad. Transactions of Nanjing University of Aeronautics and Astronautics.
  289. Qing-Hua Qin, Duo-Sheng Li, Wenzheng Wu, Xian-liang Zhou, Dun-Wen Zuo, Shi-Qiang Lu, You-Bin Gao (2015). Microstructure and mechanical properties of graphene/Al composites.
  290. Jun Li, Wenze Wang, Hui-Min Wang, Long-Long Song, Zhang-Gui Hu, Yong Zhu, Dun-Wen Zuo (2015). Influence of acid slurries on surface quality of LBO crystal in fixed abrasive CMP.DOI
  291. Xianrui Zhao, Dunwen Zuo, Mengxian Zhang, Feng Hua Xu, Shangshen Feng (2015). In situ production of ultra-fine Ti(C,N)–TiB2–Co cermets by reactive hot processing from the Co–Ti–C–BN system. International Journal of Refractory Metals and Hard Materials.DOI
  292. Zhilan Ju, Yongwei Zhu, Jianbin Wang, Dunwen Zuo (2015). The effect of different slurries on material removal of sapphire surface in fixed-abrasive lapping. International Journal of Machining and Machinability of Materials.DOI
  293. Feng Wei, Lu Wenzhuang, Cai Wenjun, Yaping Yu, Zuo Dunwen (2015). Influence Research of Diamond Micro-Nano Particulates on Single Crystal Sapphire's Friction Properties. Integrated ferroelectrics.DOI
  294. Tang Xiaolong, Feng Hua Xu, Liu Zhaozhi, Zhang Chao, Zhao Xianrui, Xiang Bin Kun, Lu Wenzhuang, Zuo Dunwen (2015). Preparation of Boron-Doped Nanocrystalline Diamond Electrode and Its Wastewater Treatment Performance. Integrated ferroelectrics.DOI
  295. 张圣斌，左敦稳，宋波，董春林（2014）. 2024铝合金搅拌摩擦焊残余应力分布研究. 《航空制造技术》.
  296. 朱延松，卢文壮，左敦稳，孙玉利，王晗，胥军（2014）. 新型损伤容限型钛合金TC21稀土催化固体渗硼. 《稀有金属材料与工程》.
  297. 徐俊华，徐锋，刘召志，赵先锐，卢文壮，左敦稳（2014）. 基于离子渗铌过渡层的金刚石刀具涂层结合性能研究. 《人工晶体学报》.
  298. 刘俨后，左敦稳，张丹（2014）. 基于矩阵的装配过程建模方法. 《南京航空航天大学学报(自然科学版)》.
  299. 戴晟，左敦稳，方淳，赵先锐，王金芳，朱流（2014）. 激光熔覆Ni/TiC复合涂层组织与性能. 《机械制造与自动化》.
  300. 左敦稳，张圣斌（2014）. 搅拌摩擦连接技术应用及其过程作用力研究. 《机械制造与自动化》.
  301. 许瑞华，黎向锋，左敦稳，王宏宇，江世好，李建忠（2014）. 扫描速度对钛合金NiCoCrAlY熔覆涂层显微组织及硬度的影响. 《稀有金属》.
  302. 胥军，卢文壮，王晗，朱延松，黄群超，左敦稳（2014）. TC4-DT钛合金磨削表面特性及其摩擦磨损性能. 《航空学报》.
  303. 汪洪峰，汪建利，左敦稳，宋娓娓，段杏林（2014）. 航空铝合金板材搅拌摩擦连接有限元分析. 《焊接学报》.
  304. 李建忠，黎向锋，左敦稳，王宏宇，江世好，陈竹（2014）. 纳米La2O3含量对NiCrCoAlY熔覆涂层组织及硬度的影响. 《功能材料》.
  305. 邓永芳，左敦稳，宋波，孙玉利（2014）. 铝合金FSJ接头弧纹形成过程及主要影响因素分析. 《焊接学报》.
  306. 李建忠，黎向锋，左敦稳，许瑞华，陈竹（2014）. 7050铝合金表面Al/Ti激光熔覆工艺实验及温度场模拟分析. 《激光与光电子学进展》.
  307. 黄群超，卢文壮，李鹏程，左敦稳，丁盛，许仁伟，姜文鸽（2014）. 18CrNiMo7-6齿轮钢淬火精确数值模拟. 《金属热处理》.
  308. 汪洪峰，左敦稳，戴晟，潘玲（2014）. 7022铝合金FSJ拼连板材残余应力和变形分析. 《材料工程》.
  309. 龚靖平，黎向锋，左敦稳，康晓军，邱佳斌（2014）. 小直径开缝衬套翻边的有限元模拟. 《塑性工程学报》.
  310. Duosheng Li, Qing H.Qin, Xianliang Zhou, Yingwei Yu, Dunwen Zuo, Aihua Zou, Xiaozhen Hu, Wenzheng Wu, Youbin Gao (2014). Synthesis and Characterization of SiCp Reinforced Aluminum Metal Matrix Composites. 《2014功能材料国际会议》.
  311. Chi Zhou, Dun-Wen Zuo, Yu-Li Sun (2014). Experimental Investigation of Integrated Heat Pipe Heat Sink for Multi-chip LED Module in Natural Convection.DOI
  312. Qi-Bao Zhu, B. Xiang, Ye Yang, Z. Meng, S. Wang, Dun-Wen Zuo (2014). Research on Synthesis of Diamond-Like Carbon (DLC) Films with Assistance of Copper Ions by Electrodeposition Technique at Low Voltage.DOI
  313. Jun Li, Biao Li, Zhang-Gui Hu, Yong Zhu, Dun-Wen Zuo (2014). Optimization of FAP in Nano Machining Process.DOI
  314. Duo-Sheng Li, Qing H. Qin, Dun-Wen Zuo, R. Boswell, Wen-Zhuang Lu, Z. Stachurski (2014). Nanocrystalline Diamond Thin Films Synthesis on Curved Surface. Plasma chemistry and plasma processing.DOI
  315. Jun Li, Lei Xia, Xiao-Ming Wang, Yong Zhu, Dun-Wen Zuo (2014). Effect of triethanolamine concentration on self-sharpening performance of fixed abrasive pad.DOI
  316. Yu-Li Sun, Bao-Hong Xia, Chun-Xiang Xie, Shou-Xin Yu, Xiao-Liang Zhu, Wen-Zhuang Lu, Jun Li, Dun-Wen Zuo (2014). Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics.DOI
  317. Jian-Zhong Li, Xiang-Feng Li, Dun-Wen Zuo, Rui-Hua Xu, Zhuo Chen (2014). Process Test and Temperature Field Simulation of the Al/Ti Laser Cladding Coating Above 7050 Aluminum Alloy.DOI
  318. Chi Zhou, Dun-Wen Zuo, Yu-Li Sun, Yu-Jie Zuo (2014). Method and device for testing thermal performance of LED radiator.
  319. Duo-Sheng Li, Dun-Wen Zuo, Qing-Hua Qin (2014). Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films. Strength of Materials.DOI
  320. Wen-Zhuang Lu, Yang-Ping Zuo, Ya-Ping Yu, Wei Feng, Xing-Lin Duan, Peng-Qing Yan, Sen Liu, Han-Fei Pan, Yu-Li Sun, Dun-Wen Zuo (2014). Ferromagnetic diamond abrasive material prepared by means of wet method.
  321. Feng Hua Xu, Muk‐Fung Yuen, Bin He, Chundong Wang, Xianrui Zhao, Xuexin Tang, Dunwen Zuo, Wenjun Zhang (2014). Microstructure and tribological properties of cubic boron nitride films on Si 3 N 4 inserts via boron-doped diamond buffer layers. Diamond and Related Materials.DOI
  322. Yi Zhu, Weixue Lu, Dunwen Zuo, W. Feng, Yongxi He (2014). Microstructure and tribological properties of REs borided TC21 alloy. Surface Engineering.DOI
  323. Shuquan Song, Dunwen Zuo (2014). Modelling and simulation of whirling process based on equivalent cutting volume. Simulation Modelling Practice and Theory.DOI
  324. Sun Yuli, Zuo Dunwen, Tong Ju-te, Wenzhuang Lu, Jun Li, Zhu Yongwei (2014). Dispersibility of CeO2 Nanoparticles in Water–Ethanol Suspensions. Integrated ferroelectrics.DOI
  325. Lu Wenzhuang, Feng Wei, Han Wang, Jun Xu, Huang Qunchao, Zhang Min, Zuo Dunwen (2014). Nano Hardness and Elastic Modulus of Nanocrystalline Diamond Coating. Integrated ferroelectrics.DOI
  326. 许瑞华，黎向锋，左敦稳，王宏宇，柳振平，李建忠（2013）. 粉末压片冷等静压处理对高温合金NiCoCrAlY熔覆涂层结合界面的影响. 《激光与光电子学进展》.
  327. 徐锋，左敦稳，张旭辉，户海峰，张骋，王珉（2013）. 基于微纳米金刚石过渡层的cBN刀具涂层制备. 《南京航空航天大学学报(自然科学版)》.
  328. 李文帅，相炳坤，庆振华，左敦稳，孟兆升（2013）. 直流等离子体喷射法制备氮化碳涂层的研究. 《工具技术》.
  329. 梁瑜轩，黎向锋，左敦稳，黄小龙，缪宏（2013）. 内螺纹低频振动冷挤压试验研究. 《航空学报》.
  330. 胥军，卢文壮，王晗，朱延松，黄群超，左敦稳（2013）. 陶瓷结合剂CBN砂轮高速磨削钛合金TC4-DT. 《金刚石与磨料磨具工程》.
  331. 汪洪峰，汪建利，宋娓娓，左敦稳，王珉（2013）. 7022铝合金搅拌摩擦焊工艺参数的优化. 《热加工工艺》.
  332. 赵先锐，左敦稳，程虎，李勤涛，戴晟，冯尚申（2013）. 塑料模具钢表面激光熔覆WxC/Ni基合金涂层的组织及性能. 《材料热处理学报》.
  333. 孙玉利，左敦稳，祝晓亮，朱永伟，黎向锋（2013）. 高能球磨法对水相介质中微米α-Al2O3分散性能的影响. 《功能材料》.
  334. 许瑞华，黎向锋，左敦稳，王宏宇，柳振平，李建忠（2013）. 球磨工艺参数对纳米悬浮液分散效果的流场仿真研究及实验验证. 《材料科学与工程学报》.
  335. 潘玲，左敦稳，汪建利，汪洪峰，黄铭敏（2013）. 7022铝合金FSJ过程温度场特点分析. 《机械设计与制造工程》.
  336. 汪洪峰，左敦稳，戴晟，王珉，王建彬（2013）. 7022铝合金FSJ拼连板材铣削变形分析. 《南京航空航天大学学报(自然科学版)》.
  337. 缪宏，左敦稳，张瑞宏（2013）. Q460高强度钢冷挤压内螺纹的表层显微组织及力学性能. 《高压物理学报》.
  338. 邓永芳，左敦稳，宋波（2013）. 搅拌摩擦焊接偏心挤压流动模型. 《焊接学报》.
  339. 户海峰，徐锋，左敦稳，赵云（2013）. 硬质合金基体金刚石涂层沉积工艺研究. 《机械制造与自动化》.
  340. 龚潺，徐锋，徐俊华，左敦稳（2013）. 航空薄壁结构件铣削加工变形数值模拟分析. 《机械制造与自动化》.
  341. 朱伟军，卢文壮，刘杨，董平和，杨波，左敦稳（2013）. 焊接残余应力引起铣削加工变形的研究. 《机械制造与自动化》.
  342. Yang Yang, Dun-Wen Zuo, Yu-Li Sun, Lian-Jing Cao (2013). Effect of Water-based Cutting Fluid on Sawing Performance for Nucleated Glass.
  343. Gui-Xiang Zhang, Yu-Gang Zhao, Dong-Biao Zhao, Dun-Wen Zuo, Feng-Shi Yin (2013). New iron-based SiC spherical composite magnetic abrasive for magnetic abrasive finishing. Chinese Journal of Mechanical Engineering.DOI
  344. Zuo Dunwen (2013). Research on fixed abrasive lapping of cerium doped glass and K9 glass. Diamond & Abrasives Engineering.
  345. Feng Xu, H. Hu, Dun-Wen Zuo, Chun Xu, Z. Qing, Min Wang (2013). Numerical analysis of Nd:YAG pulsed laser polishing CVD self-standing diamond film. Chinese Journal of Mechanical Engineering.DOI
  346. Yu-Li Sun, Dun-Wen Zuo, Lian-Jing Cao, Wen-Zhuang Lu, Yong Zhu, Jun Li (2013). Characterization of carbon fiber reinforced resin composites by the nanoindentation technique. Other Conferences.DOI
  347. Yu-Li Sun, Dun-Wen Zuo, Xiao-Liang Zhu, Yong Zhu, Xiang-Feng Li (2013). Effect of high energy ball milling on dispersion of α-Al2O3 micro-powders in water suspension.
  348. Yu-Li Sun, Lian-Jing Cao, Dun-Wen Zuo, Rui Li, Jin Xiang, Peng Zhao (2013). Electroplating diamond fretsaw with grinding materials controllably distributed and preparation method.
  349. Dun-Wen Zuo (2013). Discrete Element Method Simulation of Dental Zirconia Turning Process.
  350. Yu-Li Sun, Lian-Jing Cao, Dun-Wen Zuo, Rui Li, Jin Xiang, Peng Zhao (2013). Abrasive controllable electroplated diamond wire saw arrangement and method of preparation.
  351. Zuo Dunwen (2013). Research on the Preparation of Double-sided Diamond Coated Electrode with Gas Doping of Boron. Rengong jingti xuebao.
  352. Jun Li, Lei Xia, Peng-Peng Li, Yong Zhu, Yu-Li Sun, Dun-Wen Zuo (2013). Relationship between coefficient of friction and surface roughness of wafer in nanomachining process. Other Conferences.DOI
  353. Yu-Li Sun, Dun-Wen Zuo, Yong Zhu, Jun Li (2013). Using Taguchi Method to Optimize Polishing Parameters in Ice Fixed Abrasive Polishing.DOI
  354. Yi Zhu, Wei Lü, Dunwen Zuo, Yuli Sun, Haibo Wang, Jiang Xu (2013). Effects of rare earth additions during surface boriding on microstructure and properties of titanium alloy TC21. Materials Science and Technology.DOI
  355. Haibo Wang, Wei Lü, Juan Xu, Yansong Zhu, Qian Huang, Lifang Zhang, Dunwen Zuo (2013). Effect of rare earth (RE) on pack boronising process of titanium alloy. Surface Engineering.DOI
  356. Wenzhuang Lu, Guoping Ai, Pin Li, Yuli Sun, Dan Zhang, Dunwen Zuo (2013). Micro CVD diamond heat sink. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  357. Feng Hua Xu, Jiang Xu, Muk‐Fung Yuen, Liqin Zheng, Weixue Lu, Dunwen Zuo (2013). Adhesion improvement of diamond coatings on cemented carbide with high cobalt content using PVD interlayer. Diamond and Related Materials.DOI
  358. Lu Wenzhuang, Haipeng Xue, Sun Dafei, Hao Wang, Zuo Dunwen (2013). Original Crack and Adhesion Development of Nano Diamond Coating. Integrated ferroelectrics.DOI
  359. Zuo Dunwen (2013). Numerical Simulation Analysis of Milling Distortion for Aero-thin-walled Components. Machine Building & Automation.
  360. Zuo Dunwen (2013). Gas flow field simulation and structure analysis of HFCVD system for uniform deposition of double-sided large-area BDD. Diamond & Abrasives Engineering.
  361. 徐锋，左敦稳，张旭辉，户海峰，张骋，王珉（2012）. 切削刀具用立方氮化硼涂层的研究进展. 《硅酸盐通报》.
  362. 柳振平，黎向锋，左敦稳，王宏宇，孙玉利，江世好（2012）. 微米CeO2的细化及其悬浮液的分散稳定性研究. 《稀有金属》.
  363. 江世好，黎向锋，左敦稳，王宏宇，柳振平，许瑞华（2012）. 高分散微细La2O3水悬浮液的球磨工艺及分散机理. 《功能材料》.
  364. 郑琳，左敦稳，徐锋，卢文壮，张旭辉，黄美健，朱良杰（2012）. 铝过渡层沉积CVD金刚石涂层的研究. 《机械制造与自动化》.
  365. 柳振平，黎向锋，左敦稳，王宏宇，孙玉利，江世好（2012）. 超细CeO2粉体在醇水混合介质中的超声分散行为. 《材料科学与工程学报》.
  366. 张旭辉，左敦稳，徐锋，庆振华，黄美健，郑琳（2012）. 微/纳米CVD金刚石涂层的制备. 《机械制造与自动化》.
  367. 刘杨，卢文壮，朱伟军，汪新国，杨波，左敦稳（2012）. 喷丸处理对重型运输车车架纵梁焊接变形的影响. 《机械制造与自动化》.
  368. 黄美健，左敦稳，卢文壮，徐锋，张旭辉（2012）. CVD金刚石涂层拉丝模温度场数值分析. 《机械制造与自动化》.
  369. 李缓缓，徐锋，左敦稳（2012）. TiN涂层刀具高速铣削铝衬PCB的刀具磨损规律. 《南京航空航天大学学报(自然科学版)》.
  370. 张圣斌，左敦稳，宋波，董春林（2012）. 装卡方式对搅拌摩擦连接残余应力分布的影响. 《焊接》.
  371. 黄小龙，黎向锋，左敦稳，史大彬，梁瑜轩（2012）. 基于数值模拟的内螺纹冷挤压成形过程工艺参数优化. 《锻压技术》.
  372. 黄小龙，黎向锋，左敦稳，梁瑜轩，史大彬（2012）. 内螺纹冷挤压成形过程数值模拟. 《塑性工程学报》.
  373. 缪宏，左敦稳，张瑞宏，王珉，汪洪峰（2012）. 工件底孔直径对Q460高强度钢冷挤压内螺纹的影响. 《南京航空航天大学学报(自然科学版)》.
  374. 董学伟，黎向锋，左敦稳，汪洪峰，王吉胜，董春林，李光（2012）. 7022铝合金搅拌摩擦焊接全过程温度场的数值模拟. 《机械工程材料》.
  375. 董学伟，黎向锋，左敦稳，王吉胜，董春林，李光（2012）. 基于热力耦合模型铝合金搅拌摩擦焊接顺序优化仿真分析. 《功能材料》.
  376. 汪洪峰，汪建利，左敦稳，段杏林，王珉（2012）. 7022铝合金FSJ连接区减薄机理分析. 《功能材料》.
  377. Jie Fu, Yun-Feng Liu, Xiao-Xiao Tang, Hong-Lei Mo, Dun-Wen Zuo, Yong Zhu, Jun Li, Biao Li (2012). Composite abrasive grain in grain/alumina core-shell structure and preparation method and application of composite abrasive grain.
  378. Yang Yang, Dun-Wen Zuo, Yu-Li Sun, Zhang-Yi Yang, Ju-Te Tong (2012). Water-based cutting fluid for microcrystalline glass processing, and preparation method thereof.
  379. Yu-Li Sun, Dun-Wen Zuo, Xiao-Jun Kang, Zhen-Ping Liu, Shi-Hao Jiang, Hong-Yu Wang, Rui-Hua Xu, Jia-Bin Qiu, Xiang-Feng Li (2012). Preparation method of micro cerium oxide slurry.
  380. Zuo Dunwen (2012). Study on ultra-precision machining of K9 glass by fixed abrasive lapping and polishing. Diamond & Abrasives Engineering.
  381. Duo-Sheng Li, Xian-liang Zhou, Dun-Wen Zuo, Ai-Hua Zou (2012). Deposition of Nano-Crystalline Diamond Films of Spherical Shell.DOI
  382. Shou-Xin Yu, Wen-Gang Lu, Yu-Li Sun, Dai-Fei Sun, Dun-Wen Zuo, Lin Zhang, Feng Xu, Pin-Fu Wang, Hao Wang, Hai-Peng Xue (2012). Preparation method of complex CVD (chemical vapor deposition) diamond cutter.
  383. Yan-Song Zhu, Wen-Gang Lu, Han Wang, Jun Xu, Dun-Wen Zuo, Ya-Feng He, Yu-Li Sun, Guo-Ping Ai, Wen-Jun Cai, Feng Xu (2012). Low-temperature surface nitriding method of titanium alloy.
  384. Shihao Jiang, Xiangfeng Li, Dunwen Zuo, Hongyu Wang, Zhenping Liu, Ruihua XU (2012). A comparative study on nano La2O3 suspension treated by ultrasonic and ball milling. Journal of Rare Earths.DOI
  385. Shinichi Yoshimitsu, Shinobu Satonaka, Yoshihiro Kawano, Dunwen Zuo, Shunichi YAMASHITA (2012). Two-dimensional Monitoring System for Tool Behavior in End Milling with Small Diameter Tool (2nd Report). Journal of the Japan Society for Precision Engineering.DOI
  386. Lu Wenzhuang, Yansong Zhu, Yuan Jiajing, Zhu Liang-jie, Wang Hongjun, Zuo Dunwen, Feng Xu (2012). Limiting Aspect Ratio of Diamond Microstructure Fabricated by Model Copy Technology. Integrated ferroelectrics.DOI
  387. Zuo Dunwen (2012). Case-based Reasoning Approach for Design of Extrusion Tap. Manufacture Information Engineering of China.
  388. 缪宏，左敦稳，张瑞宏，王珉，王树宏（2011）. 基于高强度钢的冷挤压内螺纹抗疲劳机理研究. 《功能材料》.
  389. 缪宏，左敦稳，王珉，张瑞宏（2011）. 10Ni3MnCuAl钢加工表面析出硬化层的性能研究. 《功能材料》.
  390. 汪洪峰，左敦稳，黄铭敏，陈明和（2011）. 5050铝合金板材高温流变行为研究. 《材料工程》.
  391. 刘影，左敦稳，王耀华，赵钧，颜海春，纪冲，何继贤（2011）. 客机舱门承受爆炸冲击荷载的数值模拟及加固试验. 《交通运输工程学报》.
  392. 汪洪峰，左敦稳，邵定林，李光，董春林（2011）. 工艺参数对搅拌摩擦焊7022铝合金残余应力及耐磨耐蚀性能的影响. 《航空材料学报》.
  393. 孙玉利，左敦稳，王宏宇，朱永伟，李军（2011）. 表面活性剂对纳米CeO2在水介质中分散性能的影响. 《南京航空航天大学学报(自然科学版)》.
  394. 邵定林，卢文壮，左敦稳，汪洪峰，黄铭敏（2011）. 7022铝合金搅拌摩擦焊变形有限元分析. 《焊接技术》.
  395. 陈刚，黎向锋，左敦稳，王宏宇，孙玉利（2011）. 球磨工艺参数对醇水系纳米CeO2悬浮液稳定性的影响. 《功能材料》.
  396. 董学伟，黎向锋，左敦稳，王吉胜，董春林，李光（2011）. 铝合金搅拌摩擦焊接过程传热和塑性流动数值分析. 《兵器材料科学与工程》.
  397. 王宏宇，左敦稳，王明娣，孙桂芳，缪宏，孙玉利（2011）. 纳米颗粒增强NiCoCrAlY熔覆涂层的高温摩擦磨损行为(英文). Transactions of Nonferrous Metals Society of China.
  398. 江世好，黎向锋，左敦稳，王宏宇，柳振平（2011）. 基于预置压片的高温合金激光熔覆温度场仿真. 《兵器材料科学与工程》.
  399. 刘影，王宏宇，左敦稳，王强，潘文平（2011）. 氧化铈对NiCoCrAlY涂层抗热腐蚀性能的影响. 《陆军工程大学学报》.
  400. 张骋，徐锋，赵云，左敦稳（2011）. 硬质合金刀具金刚石涂层的热应力仿真. 《机械制造与自动化》.
  401. 董学伟，黎向锋，左敦稳，汪洪峰，王吉胜，董春林，李光（2011）. 基于FLUENT的7022铝合金搅拌摩擦焊接过程数值模拟与分析. 《机械制造与自动化》.
  402. 汪洪峰，左敦稳，王珉，缪宏（2011）. 5554铝合金异种焊料焊接的显微组织及力学性能. 《吉林大学学报(工学版)》.
  403. Guang-Yu Fu, Wen-Gang Lu, Yi-Fan Wu, Yu-Li Sun, Dun-Wen Zuo, Feng Xu, Pin-Fu Wang, Han Wang, Zheng-Xin Wang (2011). Elastic tensioning device for growth of diamond film electrode.
  404. Ping Gao, Jun Li, Yong Zhu, Biao Li, Yan Zhang, Ji-Long Fan, Yu-Li Sun, Bin Jiang, Dun-Wen Zuo (2011). Study on Subsurface Damage after Fixed-Abrasive Lapping with Different Particle Size.DOI
  405. Duo-Sheng Li, Xian-liang Zhou, Dun-Wen Zuo, Xiao-Zhen Hua (2011). Fabrication and Simulation of Shell Diamond Film.DOI
  406. Yu-Li Sun, Dun-Wen Zuo, Yong Zhu, Jun Li (2011). Use of Nanoindentation and Nanoscratching Tests to Characterize the Ductile-Brittle Transition.DOI
  407. Jun Li, Peng Gao, Yong Wei Zhu, Binghua Li, Yuli Sun, Dunwen Zuo (2011). Research on Subsurface Damage After Abrasives and Fixed-Abrasive Lapping of K9 Glass. Key engineering materials.DOI
  408. Hongyu Wang, Dunwen Zuo, Mingdi Wang, Guifang Sun, Hong Yan Miao, Yuli Sun (2011). High temperature frictional wear behaviors of nano-particle reinforced NiCoCrAlY cladded coatings. Transactions of Nonferrous Metals Society of China.DOI
  409. Duosheng Li, Dunwen Zuo, Xianliang Zhou, Hua Xiaozhen (2011). Fabrication and Simulation of Shell Diamond Thin Film. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry.DOI
  410. Yuli Sun, Dunwen Zuo, Hongyu Wang, Yongwei Zhu, Jun Li (2011). Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate. International Journal of Minerals Metallurgy and Materials.DOI
  411. Zuo Dunwen (2011). Simulation of the Thermal Stress of the Diamond-Coated Cemented Carbide Cutting Tool. Machine Building & Automation.
  412. Zuo Dunwen (2011). Mathematical modeling and trajectory optimization of double-sided polishing process. Optical Technique.
  413. Zuo Dunwen (2011). Preparation and applications of boron-doped diamond films. Vacuum.
  414. 汪洪峰，左敦稳，王宏宇，邵定林（2010）. 5554铝合金TIG焊缝组织与性能. 《南京航空航天大学学报(自然科学版)》.
  415. 缪宏，左敦稳，张敏，汪洪峰（2010）. Q460高强度钢内螺纹挤压力的模型. 《南京航空航天大学学报(自然科学版)》.
  416. 林欢庆，卢文壮，左敦稳，徐锋，袁佳晶，马乐娟（2010）. 整体硬质合金铣刀上制备CVD金刚石涂层的系统三维流场研究. 《人工晶体学报》.
  417. 李多生，周贤良，左敦稳，邹爱华（2010）. 等离子体稳定性对曲面金刚石膜生长的影响. 《功能材料》.
  418. 汪洪峰，左敦稳，王珉，李光，董春林（2010）. 厚板7022铝合金搅拌摩擦焊接实验研究. 《功能材料》.
  419. 程序，闫静，王宏宇，左敦稳，李锁柱（2010）. 高结合性能涂层与基体界面结合强度测定模型的有限元模拟. 《机械设计与制造工程》.
  420. 汪洪峰，左敦稳，王珉，李光，董春林（2010）. 7022铝合金搅拌摩擦焊焊接区的组织与力学性能. 《华南理工大学学报(自然科学版)》.
  421. 王宏宇，左敦稳，黎向锋，余亚平，蒋艳（2010）. 纳米SiCp增强NiCoCrAlY涂层的组织和抗氧化性能. 《材料科学与工艺》.
  422. 汪洪峰，左敦稳，邵定林，黄铭敏，应峰（2010）. 退火温度对7022铝合金干摩擦性能的影响. 《深圳大学学报(理工版)》.
  423. 陈刚，黎向锋，左敦稳，王宏宇，程序（2010）. 压片预置式激光熔覆温度场的数值模拟模型及其验证. 《应用激光》.
  424. 汪洪峰，左敦稳，黄铭敏，陈明和，缪宏（2010）. 不同温度和应变速率下7022铝合金流变应力行为(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  425. Dun-Wen Zuo (2010). Affect of diamond wire saw on the surface quality of gallium arsenide chip.
  426. Jiang-Feng Ye, Yu-Li Sun, Dun-Wen Zuo, Yong Zhu, Jun Li, Ji-Long Fan (2010). Grinding and polishing pad for cured grinding material based on thermal initiation curing and preparation method thereof.
  427. Wen-Zhuang Lu, Chen-Hong Shi, Yu-Li Sun, Dun-Wen Zuo, Guo-Jiang Zhang, Lian-Jing Cao, Yong Zhu, Jun Li, Xiao-Liang Zhu (2010). Mold for preparing frozen fixed abrasive pad.
  428. Shou-Xin Yu, Dun-Wen Zuo, Hong-Feng Wang, Hong Mou, Ding-Lin Shao, Xiang-Feng Li (2010). Weld seam lowering and thickness thinning combined stirrer used for friction stir welding.
  429. Ye-Bin Sun, Yu-Li Sun, Dun-Wen Zuo, Jing Kang, Yong Zhu, Xiao-Liang Zhu, Yun Zhao (2010). Polishing loading device capable of uniformly distributing load on surface of loader.
  430. Jun Li, Yong Zhu, Dun-Wen Zuo, Yong Zhu, Chuangtian Chen (2010). Effect of Anisotropy on Chemical Mechanical Polishing of LBO Crystal.DOI
  431. Wen-Zhuang Lu, Chen-Hong Shi, Yu-Li Sun, Dun-Wen Zuo, Guo-Jiang Zhang, Lian-Jing Cao, Yong Zhu, Jun Li, Xiao-Liang Zhu (2010). Frozen consolidated abrasive polishing pad bearing device and polishing pad thereof.
  432. Hong-Yu Wang, Dun-Wen Zuo, Jing Yan, Ming-Min Huang, Xiang-Feng Li (2010). Effects of Nanometer Al2O3 Particles on Oxidation Behaviors of Laser Cladding Low Al NiCoCrAlY Coatings.DOI
  433. Shou-Xin Yu, Dun-Wen Zuo, Hong-Feng Wang, Ji-Sheng Wang, Xue-Wei Dong, Xiang-Feng Li (2010). Method and device for controlling residual stress on stir friction welding surface.
  434. Hongyu Wang, Dunwen Zuo, Gang Chen, Guifang Sun, Xiangfeng Li, Cheng Xu (2010). Hot corrosion behaviour of low Al NiCoCrAlY cladded coatings reinforced by nano-particles on a Ni-base super alloy. Corrosion Science.DOI
  435. Hongyu Wang, Dunwen Zuo, Xiangfeng Li, Kangmin Chen, Mingmin Huang (2010). Effects of CeO2 nanoparticles on microstructure and properties of laser cladded NiCoCrAlY coatings. Journal of Rare Earths.DOI
  436. Zuo Dunwen (2010). Study on Fabrication of Diamond Microstructure Based on Model Replication Technique. Rengong jingti xuebao.
  437. Jiayuan He, Feng Hua Xu, Xiaojun Wu, Duan Zhenzhong, Yunxia Zhou, Jia Yao, Zuo Dunwen (2010). Simulation Study of Temperature Field of Diamond Film Drilled by Picosecond Pulse Laser. Machine Building & Automation.
  438. Zuo Dunwen (2010). Comparison of Lapping of Silicon Wafer between Fixed-abrasive Pad and Diamond Pellets. Guisuanyan tongbao.
  439. Zuo Dunwen (2010). Study on Lapping of K9 Glass by Fixed Abrasive Pad. Guisuanyan tongbao.
  440. 左敦稳，李军，黎向锋（2009）. 国内部分高校机械制造技术类专业必修课的比较研究. 《南京航空航天大学学报(社会科学版)》.
  441. 冯海虎，缪宏，左敦稳，薛善良（2009）. 飞机起落架抗疲劳制造工艺决策支持系统研究. 《机械设计与制造工程》.
  442. 王明娣，左敦稳，王珉，石世宏（2009）. 光内送粉激光熔覆工艺参数对单层熔覆质量的影响. 《南京航空航天大学学报(自然科学版)》.
  443. 王宏宇，左敦稳，王明娣，邵建兵（2009）. 纳米CeO2p对镍基高温合金表面NiCoCrAlY激光熔覆涂层氧化行为的影响. 《金属学报》.
  444. 杨春，卢文壮，左敦稳，徐锋，任卫涛（2009）. Si3N4陶瓷轴承NCD涂层制备中的温度场模拟. 《机械制造与自动化》.
  445. 丁子昀，左敦稳，郭魂，黎向锋（2009）. 多点装夹方案对多框体铣削变形影响的有限元分析. 《南京航空航天大学学报(自然科学版)》.
  446. 田昕，黎向锋，左敦稳，陈锦东（2009）. 基于有限元带隔板双槽钢焊接梁焊接仿真优化. 《机械制造与自动化》.
  447. 陈锦东，黎向锋，左敦稳，田昕（2009）. 基于MSC.Fatigue的带孔板疲劳寿命仿真. 《机械制造与自动化》.
  448. 黄铭敏，左敦稳，汪洪峰（2009）. 汽车激光焊接模拟热源模型研究. 《汽车工艺师》.
  449. 相炳坤，左敦稳，黎向锋（2009）. 从专利文献分析金刚石涂层工具技术进展. 《人工晶体学报》.
  450. 卢文壮，左敦稳，任卫涛，杨春，徐锋，王珉（2009）. 金刚石涂层的纳米压痕力学性能研究. 《人工晶体学报》.
  451. 王宏宇，左敦稳，马浩，王明娣，陆英艳（2009）. 工艺参数对压片预置式激光熔覆涂层微观质量的影响. 《材料工程》.
  452. 王鸿翔，左敦稳，卢文壮，徐峰（2009）. 硅衬底上高增透金刚石膜的制备研究. 《功能材料》.
  453. Chun Yang, Wen-Gang Lu, Dun-Wen Zuo, Feng Xu, Wei-Tao Ren（2009）. SI_3N_4セラミック軸受における熱流束解析を行った。【JST・京大機械翻訳】.
  454. 王宏宇，左敦稳，孙玉利，徐锋，张丹 (2009). Microstructure of nanometer Al2O3dispersion strengthened Ni-based high-temperature protective coatings by laser cladding. Transactions of Nonferrous Metals Society of China.
  455. Jun Li, Yong Zhu, Dun-Wen Zuo, Yong Zhu, Chuangtian Chen (2009). Influence of slurry pH on material removal rate and surface roughness of super-precision polishing of LBO crystal. International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).DOI
  456. Dun-Wen Zuo, Yu-Li Sun, Yu-Fei Zhao, Yong Zhu (2009). Basic research on polishing with ice bonded nanoabrasive pad.DOI
  457. Chun Yang, Wen-Gang Lu, Dun-Wen Zuo, Feng Xu, Wei-Tao Ren（2009）. HFCVDシステムにおける基板温度場と気相空間場の数値解析【JST・京大機械翻訳】.
  458. Jun Li, Yong-Wei Zhu, Dun-Wen Zuo, Yongcheng Zhu, Chuan Chen（2009）. Taguchi方法优化LBO晶体化学机械抛光参数Optimization of Polishing Parameters with Taguchi Method for LBO Crystal in CMP.
  459. Wen-Gang Lu, Dun-Wen Zuo, Wei-Tao Ren, Chun Yang, Feng Xu, Min Wang（2009）. ダイヤモンド被覆のナノインデンテーション特性を研究した。【JST・京大機械翻訳】.
  460. Feng Hua Xu, Dunwen Zuo, Wenzhuang Lu, Yongwei Zhu, Min Wang (2009). Grid and substrate bias effects on mechanical properties of diamond films prepared by HFCVD. Transactions of Nonferrous Metals Society of China.DOI
  461. Kui Liu, Dunwen Zuo, X. P. Li, M. Rahman (2009). Nanometric ductile cutting characteristics of silicon wafer using single crystal diamond tools. Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena.DOI
  462. 莫国影，左敦稳，朱笑笑（2008）. 基于CCD图像的表面疲劳裂纹识别与长度计算. 《机械制造与自动化》.
  463. 莫国影，左敦稳，黎向锋（2008）. 基于CCD图像的表面疲劳裂纹检测方法. 《机械制造与自动化》.
  464. 孙玉利，左敦稳，朱永伟，王宏宇，卢文壮（2008）. 纳米α-Al2O3在水相介质中的分散性能. 《南京航空航天大学学报(自然科学版)》.
  465. 李庆林，黎向锋，左敦稳（2008）. 基于BP神经网络的冷挤压孔疲劳寿命预测. 《航空精密制造技术》.
  466. 许鸿昊，左敦稳，朱笑笑，王珉（2008）. 拉伸高速铣削对TC4钛合金疲劳性能的影响. 《南京航空航天大学学报(自然科学版)》.
  467. 王宏宇，左敦稳，孙玉利，朱永伟（2008）. 微纳米粉体机械复合的配比关系. 《中国有色金属学报》.
  468. 相炳坤，左敦稳，黎向锋（2008）. 国内外类金刚石膜技术现状专利分析. 《功能材料》.
  469. 李军，朱永伟，左敦稳，朱镛，陈创天（2008）. LBO晶体的超精密加工工艺研究. 《功能材料》.
  470. 王宏宇，左敦稳，陆英艳，许鸿昊（2008）. 镍基合金激光熔覆MCrAlY涂层基体裂纹的成因与控制. 《航空材料学报》.
  471. 徐锋，左敦稳，卢文壮，张海余，王珉（2008）. 纳米金刚石薄膜的微结构和残余应力. 《金属学报》.
  472. 许鸿昊，左敦稳，朱笑笑，张振金，赵灿，王珉（2008）. 拉伸装夹对TC4钛合金铣削表面质量的影响. 《应用科学学报》.
  473. 王宏宇，左敦稳，余亚平，许晓静（2008）. 激光熔覆纳米SiCp增强NiCrAlY涂层的组织和硬度分布. 《第十五届全国高技术陶瓷学术年会摘要集》.
  474. 郭魂，左敦稳，王焱，王珉，郑权（2008）. BT20数控铣削力模型研究. 《机械》.
  475. Dun-Wen Zuo, Yong Zhu (2008). Fixed abrasive polishing pad with self-finishing function and even wear.
  476. Yu-Li Sun, Dun-Wen Zuo, Yong Zhu (2008). Fixed abrasive grinding polishing pad and method of manufacturing the same.
  477. Dun-Wen Zuo (2008). Effect of Boron-doping on the Stress in CVD Diamond Thick Film.
  478. Yu-Li Sun, Dun-Wen Zuo, Yong Zhu (2008). Method and device for controlling polishing temperature of freezing fixed abrasive.
  479. Duosheng Li, Dunwen Zuo, Wenzhuang Lu, Rongfa Chen, Xiang Bingkun, Min Wang (2008). Effects of methane concentration on diamond spherical shell films prepared by DC-plasma jet CVD. Solid State Ionics.DOI
  480. Guangbin Bu, Can Zhao, Dunwen Zuo, Min Wang (2008). The Influence of Material Removal on the Modal Change of Blade. Lecture notes in computer science.DOI
  481. Zuo Dunwen (2008). Accuracy Analysis of Holes Drilled on Inclined Workpiece Surface. Machine Building & Automation.
  482. 李多生，左敦稳，陈荣发，相炳坤，赵礼刚，王珉（2007）. 直流等离子体CVD金刚石薄膜微观结构分析. 《稀有金属材料与工程》.
  483. 李多生，左敦稳，陈荣发，相炳坤，赵礼刚（2007）. 大尺寸金刚石膜生长中等离子体弧源的稳定性. 《南京航空航天大学学报(自然科学版)》.
  484. 唐国兴，郭魂，左敦稳，王树宏，王珉（2007）. 残余应力引起的铣削变形有限元分析. 《机械》.
  485. 唐国兴，郭魂，左敦稳，鹿婷（2007）. 航空结构件残余应力释放引起加工变形的数值模拟. 《装备制造技术》.
  486. Wen-Zhuang Lu, Yu-Li Sun, Dun-Wen Zuo, Yong Zhu, Li-Gang Zhao (2007). Monocrystalline silicon high-efficient composite cutting method and cutting system thereof.
  487. Yuli Sun, Dunwen Zuo, Yongwei Zhu, Min Wang (2007). Surface Formation of Single Silicon Wafer Polished with Nano-sized Al2O3 Powders. Chinese Journal of Chemical Physics.DOI
  488. Hong-Yu Wang, Dun-Wen Zuo, Duo-Sheng Li, Xin-Yi Luo, Ming-Di Wang, Yong Zhu (2007). Mechanical process of preparing composite nanometer ceramic and micron metal powder.
  489. Shou-Xin Yu, Yu-Li Sun, Dun-Wen Zuo, Guang-Ming Jiao, Hong-Yu Wang (2007). Nanometer ceria sizing agent and preparing method thereof.
  490. Zuo Dunwen, Yoshihiro Kawano (2007). Application of projection image of end mill to monitor its behaviour. International Journal of Computer Applications in Technology.DOI
  491. Zuo Dunwen (2007). Study on Control System of Miniature Equipement for CVD Diamond Deposition. Guisuanyan tongbao.
  492. Duo-sheng LI, Dunwen Zuo, Xianliang Zhou, Xiao-zhen HUA, Rongfa Chen, Li-gang ZHAO (2007). Microdistortion behavior of Al alloy reinforced by SiCp. Transactions of Nonferrous Metals Society of China.DOI
  493. Yuli Sun, Dunwen Zuo, Yongwei Zhu, Feng Hua Xu, Min Wang (2007). Characterization of Surface Layer of Silicon Wafer by Using Nano Indenter. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
  494. 陈荣发，左敦稳，李多生，相炳坤，赵礼刚，王珉（2006）. 直流电弧喷射等离子体炬阳极喷嘴积碳现象的研究. 《航空材料学报》.
  495. 郭魂，左敦稳，王树宏，王珉（2006）. 铝合金预拉伸厚板内残余应力分布的测量. 《华南理工大学学报(自然科学版)》.
  496. 任旭东，张永康，左敦稳，周建忠，高长伟（2006）. 涂层对钛合金激光冲击效果的影响. 《江苏大学学报(自然科学版)》.
  497. 王宗荣，左敦稳，王珉（2006）. 基于GA-NN的钛合金工件磨削表面烧伤裂纹图像的自动识别. 《南京理工大学学报》.
  498. 骆心怡，左敦稳，王珉，李顺林，杨文涛，常华（2006）. 纳米CeO2/Zn复合粉末的高能球磨法制备与表征. 《南京航空航天大学学报(自然科学版)》.
  499. 莫国影，左敦稳，马浩，陈荣媛（2006）. 高温合金磨削烧伤表面的CCD图像特征研究. 《机械制造与自动化》.
  500. Yoshihiro Kawano, Dunwen Zuo, Shinobu Satonaka, Shinichi Yoshimitu, Shunichi YAMASHITA (2006). Monitoring System for Behavior of Small-diameter End Mill by Use of CCD Image (2nd Report). Seimitsu kougakkaishi rombunshuu/Seimitsu kougakkaishi/Seimitsu Kougakkaishi rombunshuu.DOI
  501. 陈明和，高霖，朱知寿，左敦稳，王珉（2005）. 基于模糊神经网络的升温超塑性成形工艺参数优化. 《南京航空航天大学学报(自然科学版)》.
  502. 陈荣发，左敦稳，李多生，相炳坤，赵礼刚，王珉（2005）. 甲烷浓度对等离子喷射金刚石厚膜生长稳定性的影响. 《金属学报》.
  503. 王树宏，左敦稳，黎向锋，王珉（2005）. 预拉伸铝合金厚板7050T7451内部残余应力分布测试理论及试验研究. 《应用科学学报》.
  504. 陈明和，谢优华，芮玉龙，左敦稳，王珉（2005）. Al-6Mg-0.2Sc合金高应变速率超塑成形性能. 《中国有色金属学报》.
  505. 王宗荣，左敦稳，王珉（2005）. TC4钛合金高速铣削参数的模糊正交优化. 《南京理工大学学报》.
  506. 高长伟，黎向锋，左敦稳，王珉，张永康，任旭东（2005）. TC4钛合金板激光冲击成形实验研究. 《应用激光》.
  507. 张永康，张雷洪，左敦稳，冯爱新，孔德军，周建忠，葛涛，张凌峰，任旭东（2005）. 激光冲击成形下3A21铝板料表面残余应力. 《南京航空航天大学学报(自然科学版)》.
  508. 布光斌，程足发，左敦稳，王珉（2005）. 拉紧条件下铝合金铣削残余应力的试验研究. 《南京航空航天大学学报(自然科学版)》.
  509. 杨建阳，左敦稳，黎向锋，张永康，王珉（2005）. 激光冲击成形TA2钛合金板的变形与残余应力. 《南京航空航天大学学报(自然科学版)》.
  510. 徐锋，左敦稳，卢文壮，黎向锋，相炳坤，李磊，王珉（2005）. 连续多试样纳米金刚石膜沉积设备及工艺. 《南京航空航天大学学报(自然科学版)》.
  511. 陈明和，高霖，薛玉雷，左敦稳，王珉（2005）. 板料应力成形极限判据的有限元分析程序. 《南京航空航天大学学报(自然科学版)》.
  512. 郭魂，左敦稳，王树宏，王焱，王珉（2005）. 拉伸装夹对航空框类零件加工变形影响的有限元分析. 《南京航空航天大学学报(自然科学版)》.
  513. 王明娣，钟康民，左敦稳，王珉（2005）. 绿色夹具——基于气动肌腱与机械增力机构的夹具系统. 《南京航空航天大学学报(自然科学版)》.
  514. Duo-Sheng Li, Dun-Wen Zuo, Xian-liang Zhou, Xiao-Zhen Hua, Tong-Cai Chen, Jian-yun Zhang (2005). Effect of residual-stress on microyield behavior of Al alloy reinforced by SiC_p.
  515. Zuo Dunwen (2005). Feasibility of Evaluation for Machining Burn on Work Surface Based on CCD Image. Journal of Suzhou Institute of Silk Textile Technology.
  516. Yoshihiro Kawano, Dunwen Zuo, Shinobu Satonaka, Shinichi Yoshimitu, Shunichi YAMASHITA (2005). Monitoring System for Behavior of Small-diameter End Mill by Use of CCD Image. Seimitsu kougakkaishi rombunshuu/Seimitsu kougakkaishi/Seimitsu Kougakkaishi rombunshuu.DOI
  517. 卢文壮，左敦稳，王珉，黎向锋（2004）. 基于Cr过渡层沉积CVD金刚石涂层的试验研究. 《南京航空航天大学学报(自然科学版)》.
  518. 王树宏，左敦稳，王珉，王宗荣（2004）. 改进剥层应变法测量铝合金预拉伸厚板内部残余应力分布(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  519. 王树宏，左敦稳，润长生，王珉，徐礼林（2004）. LY12,В95п.ч和7050铝合金预拉伸厚板内部残余应力分布特征评估与分析. 《材料工程》.
  520. Dun-Wen Zuo (2004). Study on Mechanical Polishing for CVD Diamond Thick Film and Its Residual Stresses.
  521. Dun-Wen Zuo (2004). Fabrication and Applications of Diamond-like Carbon Films.
  522. Zuo Dunwen (2004). Analysis on Electromachinied Surface of B-Doped CVD Diamond Film. Journal of Suzhou Institute of Silk Textile Technology.
  523. Zuo Dunwen (2004). The Laser Forming of The Shell. Journal of Suzhou Institute of Silk Textile Technology.
  524. 陈明和，谢兰生，周建华，左敦稳，王珉（2003）. 基于BP神经网络的TC4钛合金超塑性变形后组织及性能预测研究. 《机械工程材料》.
  525. 卫中山，王珉，左敦稳，李亮（2003）. 钛合金的微动疲劳及其防护. 《材料科学与工程学报》.
  526. 庄磊，左敦稳，王珉（2002）. 直线电机驱动的凸轮车削伺服刀架系统研究. 《南京航空航天大学学报(自然科学版)》.
  527. 张明，王珉，左敦稳（2002）. 45#钢微动疲劳特性的研究. 《南京航空航天大学学报(自然科学版)》.
  528. 张 明，王 珉，左敦稳（2002）. 抗疲劳制造技术的研究现状与发展趋势. 《机械设计与制造》.
  529. 卫中山，吴申庆，王珉，左敦稳（2002）. 钛酸钾晶须增强铝基复合材料的热循环尺寸稳定性. 《复合材料学报》.
  530. 张明，王珉，左敦稳（2002）. TC4钛合金微动疲劳特性的研究. 《机械设计与制造》.
  531. 周宗明，左敦稳，王珉（2001）. 温度快速跟踪控制算法的研究与实现. 《南京航空航天大学学报(自然科学版)》.
  532. 徐锋，方捷，左敦稳，陈建满，张静（2000）. 高校管理信息系统若干问题的探讨. 《南京航空航天大学学报(社会科学版)》.
  533. 谢国治，左敦稳，王珉（2000）. 单层钎焊砂盘磨粒分布有序性研究. 《南京航空航天大学学报(自然科学版)》.
  534. Zuo Dunwen (2000). Gaussian Decomposition for Raman Spectra of hydrogen-free Diamond-Like Carbon Film Based on LM Algorithm. Zhongguo jixie gongcheng.
  535. 左敦稳，朱纪军，王珉（1999）. 过滤式阴极电弧沉积类金刚石薄膜的特性分析. 《航空学报》.
  536. 黎向锋，左敦稳，王珉（1999）. Ni-Mo电沉积层的组成和结构. 《南京航空航天大学学报(自然科学版)》.
  537. 张春明，黎向锋，左敦稳，王珉，杨胜昌（1999）. 等离子喷涂压电陶瓷涂层的基础研究. 《航空制造技术》.
  538. 左敦稳，王珉，刘奎，傅仕伟（1998）. 双轴柔性滚弯技术的实验研究. 《南京航空航天大学学报(自然科学版)》.
  539. 张春明，左敦稳，王珉（1998）. 等离子喷涂中粉末熔化过程的数值分析. 《南京航空航天大学学报(自然科学版)》.
  540. 刘奎，左敦稳，王珉，李亮，梅胜敏（1998）. 铁基金刚石节块的热处理及其耐磨性能研究. 《南京航空航天大学学报(自然科学版)》.
  541. 傅仕伟，王珉，左敦稳（1998）. 冷挤压孔抗疲劳增寿机理与试验研究. 《航空制造技术》.
  542. 左敦稳（1996）. 抗疲劳制造技术取得新进展. 《表面技术》.

预印本

  1. Xuang Zhao, Yuli Sun, Zhe Yan, Guoqing Jiang, Wenzhuang Lu, Yebin Sun, Dunwen Zuo (2026). Abrasive media viscosity regulation in abrasive flow finishing of additively manufactured waveguides: balancing boss surface smoothing and edge profile retention. Research Square.DOI
  2. Wenxuan Zhao, Feng Hua Xu, Xianqing Shi, Chengzuan Gao, Yuan Liu, Yanchao Zhao, Dunwen Zuo (2026). Enhancing tribocorrosion durability of a-C:H films via Cr/Si co-doping: Microstructure-interface synergistic regulation mechanism. SSRN Electronic Journal.DOI
  3. Yuan Liu, Feng Hua Xu, Ming Zhou, Huan Wu Cheng, Xianqing Shi, Wenxuan Zhao, Dunwen Zuo (2026). Study on Electrochemical and Tribological Properties of ReCN Coatings Prepared by Magnetron Sputtering. SSRN Electronic Journal.DOI
  4. Guizhong Guo, Shusen Hou, Zhankui Wang, Dunwen Zuo (2025). Corrosion Resistance and Biocompatibility of Fe-Based Film on Az31 Mg-Alloy. SSRN Electronic Journal.DOI
  5. Wen-Xuan Zhao, Feng Hua Xu, Ao Yu, Shengji Zhou, Shuo Sun, Yuan Liu, Dunwen Zuo (2025). Effects of Ar Ion Physical Etching on Maskless Diamond Nanocone Structures: Simulation and Experiment. SSRN Electronic Journal.DOI
  6. Chenxukun Lou, Feng Hua Xu, Liang Gui, Runhan Li, Changheng Qi, Dunwen Zuo (2024). Temperature field reconstruction of stirred friction welding based on deep learning work conditions features fusion. Research Square.DOI
  7. Xianqing Shi, Feng Xu, Chengzuan Gao, Qian Zhou, Hailong Zhang, Wenxuan Zhao, Yanan Ge, Dunwen Zuo (2024). Non-Equimolar Nbtamowalc Coating Design Integration Based Chemical Descriptors and Mechanical Attributes by Machine Learning. SSRN Electronic Journal.DOI
  8. Guizhong Guo, Shusen Hou, Zhankui Wang, Dunwen Zuo (2024). Corrosion Resistance and Biocompatibility of Fe-Based Composite Coating on Az31 Magnesium Alloy. SSRN Electronic Journal.DOI
  9. Huayang Wu, Jiejing Li, Dunwen Zuo (2022). An analysis of the heat source contribution of ball screw based on WNN and PSO. Research Square.DOI
  10. Yangyang Zhao, Wenzhuang Lu, Yansong Zhu, Dunwen Zuo (2021). Pretreatment of CFRP by Amino Thermoset Abrasive Air Jet Machining. Research Square.DOI

书籍章节

  1. Ning He, Kai Wu, Zhigang Wang, Chengyu Jiang, Dunwen Zuo (2002). Precision Machining of Thin-walled Workpiece by NC Compensating Deflection. Springer eBooks.DOI
  2. J.H. Xu, Dunwen Zuo (1996). COMBINED CUT AND FORM TAPPING IN A TITANIUM ALLOY. Elsevier eBooks.DOI
  3. Dunwen Zuo, Yong Ming Dai, Min Wang (1994). Effect of Diamond Surface Modification on Its Cutting Performance. Elsevier eBooks.DOI

研究方向

金属学及金属工艺航空航天科学与工程化学物理学

此主页由公开资料整理，尚未经学者本人认领。