李圣怡

期刊论文

1. Shengyi Li, Fei Gao, Wen-Bin Qiu (2025). Gradient microstructure and mechanical properties of LPBF fabricated CuCrZr alloys. Materials letters (General ed.).DOI
2. Yang Tan, Jian-Bao Wang, F. Feng, Junbiao Guo, Y. Lian, Xiang Liu, Juan Du, Shengyi Li, Tianyu Zhao, Chuan Wu, Jun Tang (2024). Additive manufacturing of W/RAFM hypervapotron plasma-facing components and the steady state thermal fatigue behavior. Journal of Nuclear Materials.DOI
3. Shengyi Li, Wen-Bin Qiu, Tianyu Zhao, A. Li, Yang Tan, P. Wen, Chuan Wu, Juan Du, Jun Tang (2023). Microstructure and mechanical properties comparison of ferritic/martensitic steel fabricated by wrought and selective laser melting. Materials letters (General ed.).DOI
4. P. Wen, Xun-Xiang Hu, Cuncai Fan, Yang Tan, Wen-Bin Qiu, Tianyu Zhao, Shengyi Li, Chuan Wu, Juan Du, Jun Tang (2023). Irradiation hardening of WK-based PFM exposed to 14 MeV protons. Fusion engineering and design.DOI
5. Shengyi Li, Long-Qing Chen, Wen-Bin Qiu, P. Wen, Yang Tan, Chuan Wu, Tianyu Zhao, Juan Du, Junying Tang (2022). Performance and evolution of W/steel joint fabricated by selective laser melting. Science and technology of welding and joining.DOI
6. Long-Qing Chen, Shengyi Li, Wen-Bin Qiu, Bo Huang, Y. Lian, Xiang Liu, Jun Tang (2021). Combining the K-bubble strengthening and Y-doping: Microstructure, mechanical/thermal properties, and thermal shock behavior of W-K-Y alloys. International Journal of Refractory Metals and Hard Materials.DOI
7. Hang Du, Ci Song, Shengyi Li, Xiaoqiang Peng, Feng Shi, Mengwei Zhao (2020). Multi-tool selection model for the error control of mid-to-high frequency and rapid fabrication on large-scale aspheric optics. Optik.DOI
8. Wenqiang Peng, Xiong Deng, Zhenbing Luo, Shengyi Li (2018). A nano-imprint method analysis of the optical subsurface quality processed by hydrodynamic effect polishing. Optik.DOI
9. Feng Guan, Hao Hu, Shengyi Li, Xiaoqiang Peng, Feng Shi (2018). Analysis of material removal rate and stability in lap-magnetorheological finishing. Optical Engineering.DOI
10. Feng Guan, Hao Hu, Shengyi Li, Zhongyan Liu, Xiaoqiang Peng, Feng Shi (2018). A novel Lap-MRF method for large aperture mirrors. The International Journal of Advanced Manufacturing Technology.DOI
11. Hang Du, Ci Song, Shengyi Li (2018). Study on Surface Roughness of Modified Silicon Carbide Mirrors polished by Magnetorheological Finishing. IOP Conference Series Materials Science and Engineering.DOI
12. 万丽荣，杨素，董国正，李圣怡（2017）. 双抛光轮磁流变机床设计与抛光工艺研究. 《组合机床与自动化加工技术》.
13. 葛坤鹏，李圣怡，胡皓（2017）. 铝合金反射镜磁流变抛光表面质量控制的参数优化. Nanotechnology and Precision Engineering.
14. 李圣怡（2017）. 太空“千里眼”的神奇光学制造技术. 《中国基础科学》.
15. 林昱轩，宋辞，石峰，李圣怡（2017）. 实现高效率低损伤研磨加工的磨料优化研究. 《航空精密制造技术》.
16. Wenqiang Peng, Shengyi Li, Chaoliang Guan, Yuan Li, Xudong Hu (2017). Ultra-precision optical surface fabricated by hydrodynamic effect polishing combined with magnetorheological finishing. Optik.DOI
17. Shengyi Li, Ci Song, Hang Du (2017). Research on convergence efficiency optimization of large and middle-scale silicon carbide mirrors.DOI
18. Hang Du, Ci Song, Shengyi Li, Mingjin Xu, Xiaoqiang Peng (2017). Optimization technique for rolled edge control process based on the acentric tool influence functions. Applied Optics.DOI
19. Dede Zhai, Shanyong Chen, Ziqiang Yin, Shengyi Li (2017). Review of self-referenced measurement algorithms: Bridging lateral shearing interferometry and multi-probe error separation. Frontiers of Mechanical Engineering.DOI
20. Mingjin Xu, Yifan Dai, Xuhui Xie, Lin Zhen Zhou, Shengyi Li, Wenqiang Peng (2017). Ion beam figuring of continuous phase plates based on the frequency filtering process. Frontiers of Mechanical Engineering.DOI
21. Shanyong Chen, Shuai Xue, Yifan Dai, Shengyi Li (2017). Subaperture stitching test of convex aspheres by using the reconfigurable optical null. Optics & Laser Technology.DOI
22. 管峰，李圣怡，关朝亮，铁贵鹏（2016）. 气体静压轴承设计及关键零件加工工艺研究. 《机械科学与技术》.
23. 杨平，石峰，李圣怡，戴一帆（2016）. 纳米射流抛光装置设计及其试验. 《强激光材料与元器件学术研讨会暨激光破坏学术研讨会》.
24. 杨平，彭文强，李圣怡，石峰（2016）. 熔石英元件纳米射流超光滑抛光流场仿真与实验. 《航空精密制造技术》.
25. 李圣怡（2016）. 光学非球面镜制造中的面形测量技术 = The form error measurement technology in manufacturing of aspheric optical components. 《国防科技大学出版社》.
26. Shengyi Li, Yifan Dai (2016). Ion Beam Figuring Technology.DOI
27. Shengyi Li, Yifan Dai (2016). CCOS Technology Based on Small Polishing Pad.DOI
28. Shengyi Li, Yifan Dai (2016). Front Matter.DOI
29. Shengyi Li, Yifan Dai (2016). Index.DOI
30. Shengyi Li, Yifan Dai (2016). Evaluation of Deterministic Optical Machining Errors.DOI
31. Shengyi Li, Yifan Dai (2016). Subsurface Damage of Optical Components in Manufacturing Processes.DOI
32. Shengyi Li, Yifan Dai (2016). The Basic Theory of Aspheric Optical Lapping and Polishing Technology.DOI
33. Shengyi Li, Yifan Dai (2016). Phase Retrieval In Situ Testing of Large‐Middle Optical Surfaces.DOI
34. Shengyi Li, Yifan Dai (2016). Magnetorheological Figuring.DOI
35. Shengyi Li, Yifan Dai (2016). Measurement Technology in Manufacturing of Large‐Middle Optical Surfaces.DOI
36. Shengyi Li, Yifan Dai (2016). Foundation of the Aspheric Optical Polishing Technology.DOI
37. Shengyi Li, Yifan Dai (2016). Coordinate Measuring Technology of Optical Aspheric Surface.DOI
38. Shengyi Li, Yifan Dai (2016). Subaperture Stitching Interferometry.DOI
39. Wenqiang Peng, Chaoliang Guan, Shengyi Li, Zhuo Wang (2016). The improvement of laser induced damage resistance of optical workpiece surface by hydrodynamic effect polishing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
40. Hang Du, Shengyi Li, Ci Song (2016). Control of rolled edge based on the discrete local error figuring technique. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
41. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2016). Computations involved in IBF process and introduction of the software IBFCAM. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
42. Baolu Shi, Yifan Dai, Xuhui Xie, Shengyi Li, Lin Zhen Zhou (2016). An experimental study on arcing in arc-enhanced plasma machining technology for etching of silicon carbide ceramics. The International Journal of Advanced Manufacturing Technology.DOI
43. Lin Zhen Zhou, Lei Huang, Nathalie Bouet, Konstantine Kaznatcheev, Matthew Vescovi, Yifan Dai, Shengyi Li, Mourad Idir (2016). New figuring model based on surface slope profile for grazing-incidence reflective optics. Journal of Synchrotron Radiation.DOI
44. Shanyong Chen, Yifan Dai, Xiaoqiang Peng, Shengyi Li (2016). Error analysis and surface reconstruction for swing arm profilometry. Measurement.DOI
45. Fujing Tian, Ziqiang Yin, Shengyi Li (2016). Theoretical and experimental investigation on modeling of surface topography influenced by the tool-workpiece vibration in the cutting direction and feeding direction in single-point diamond turning. The International Journal of Advanced Manufacturing Technology.DOI
46. Baolu Shi, Yifan Dai, Xuhui Xie, Shengyi Li, Lin Zhen Zhou (2016). Arc-Enhanced Plasma Machining Technology for High Efficiency Machining of Silicon Carbide. Plasma Chemistry and Plasma Processing.DOI
47. Fujing Tian, Ziqiang Yin, Shengyi Li (2016). A novel long range fast tool servo for diamond turning. The International Journal of Advanced Manufacturing Technology.DOI
48. 董国正，胡皓，李圣怡，阳灿（2015）. 基于永磁体的小口径磁流变抛光装置设计与优化. Nanotechnology and Precision Engineering.
49. Lin Zhen Zhou, Mourad Idir, Nathalie Bouet, Konstantine Kaznatcheev, Lei Huang, Matthew Vescovi, Yifan Dai, Shengyi Li (2015). One-dimensional ion-beam figuring for grazing-incidence reflective optics. Journal of Synchrotron Radiation.DOI
50. Shaoshan Chen, Shengyi Li, Hao Hu, Guipeng Tie, Chaoliang Guan, Qi Li (2015). Analysis of surface quality and processing optimization of magnetorheological polishing of KDP crystal. Journal of Optics.DOI
51. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2015). Obliquely incident ion beam figuring. Optical Engineering.DOI
52. Zhuo Wang, Lin Wang, Wenqiang Peng, Yujun Cao, Junhong Yang, Li Dan Tang, Shengyi Li (2015). Origin and distribution of redeposition layer in polished fused silica. Optical Engineering.DOI
53. Fujing Tian, Ziqiang Yin, Shengyi Li (2015). Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors. The International Journal of Advanced Manufacturing Technology.DOI
54. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Wenlin Liao, Shengyi Li (2015). Translation-reduced ion beam figuring. Optics Express.DOI
55. Tao Wang, Guilin Wang, Dengchao Zhu, Shengyi Li (2015). Influence of measuring algorithm on shape accuracy in the compensating turning of high gradient thin-wall parts. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
56. Shanyong Chen, Yifan Dai, Xuqing Nie, Shengyi Li (2015). Parametric registration of cross test error maps for optical surfaces. Optics Communications.DOI
57. Shaoshan Chen, Shengyi Li, Xiaoqiang Peng, Hao Hu, Guipeng Tie (2015). Research of polishing process to control the iron contamination on the magnetorheological finished KDP crystal surface. Applied Optics.DOI
58. 刘勇，尹自强，李圣怡，关朝亮（2014）. 微槽结构单点金刚石飞切加工的切削力建模. 《国防科技大学学报》.
59. 田富竟，李圣怡，尹自强，李宁（2014）. 快轴伺服系统的设计与性能测试. 《国防科技大学学报》.
60. 彭文强，关朝亮，李圣怡 (2014). Defect-free surface of quartz glass polished in elastic mode by chemical impact reaction. Journal of Central South University.
61. 佐晓波，尹自强，王建敏，李圣怡（2014）. 自补偿液体静压轴承静/动态特性有限元分析. 《湖南大学学报(自然科学版)》.
62. 尹国举，李圣怡，解旭辉，周林，戴一帆（2014）. 光学元件离子束修形去除效率分析. Nanotechnology and Precision Engineering.
63. 李圣怡（2014）. 碳化硅光学反射镜超精密加工的基础理论与方法.
64. Shanyong Chen, Shengyi Li, Guilin Wang (2014). Subaperture test of wavefront error of large telescopes: error sources and stitching performance simulations. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
65. Shaoshan Chen, Shengyi Li, Hao Hu, Qi Li, Guipeng Tie (2014). Influence law of structural characteristics on the surface roughness of a magnetorheological-finished KDP crystal. Applied Optics.DOI
66. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2014). Surface evaluation and evolution during hydrodynamic effect polishing for quartz glass. Applied Optics.DOI
67. Xuqing Nie, Shengyi Li, Hao Hu, Qi Li (2014). Control of mid-spatial frequency errors considering the pad groove feature in smoothing polishing process. Applied Optics.DOI
68. Yepeng Li, Shanyong Chen, Bing Song, Shengyi Li (2014). Optomechanical design of near-null subaperture test system based on counter-rotating CGH plates. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
69. Guoju Yin, Shengyi Li, Xuhui Xie, Lin Zhen Zhou (2014). Ultra-precision process of CaF2single crystal. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
70. Xuqing Nie, Shengyi Li, Ci Song, Hao Hu (2014). Combined fabrication process for high-precision aspheric surface based on smoothing polishing and magnetorheological finishing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
71. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2014). Surface quality of silicon wafer improved by hydrodynamic effect polishing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
72. Fujing Tian, Ziqiang Yin, Shengyi Li (2014). Fast axis servo for the fast and precise machining of non-rotational symmetric optics. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
73. Ziqiang Yin, Shengyi Li, Fujing Tian (2014). Exact reconstruction method for on-machine measurement of profile. Precision Engineering.DOI
74. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2014). Efficient fabrication of ultrasmooth and defect-free quartz glass surface by hydrodynamic effect polishing combined with ion beam figuring. Optics Express.DOI
75. Yong Shu, Xuqing Nie, Feng Shi, Shengyi Li (2014). Compare study between smoothing efficiencies of epicyclic motion and orbital motion. Optik.DOI
76. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2014). Material removal mechanism of ceria particles with different sizes in glass polishing. Optical Engineering.DOI
77. Xuqing Nie, Shengyi Li, Feng Shi, Hao Hu (2014). Generalized numerical pressure distribution model for smoothing polishing of irregular midspatial frequency errors. Applied Optics.DOI
78. Shanyong Chen, Chunyu Zhao, Yifan Dai, Shengyi Li (2014). Reconfigurable optical null based on counter-rotating Zernike plates for test of aspheres. Optics Express.DOI
79. Lin Zhen Zhou, Shengyi Li, Wenlin Liao, Hao Hu, Yifan Dai, Xuhui Xie (2014). Ion Beam Technology: Figuring, Adding and Smoothing for High-precision Optics. Classical Optics 2014.DOI
80. 佐晓波，尹自强，王建敏，李圣怡，刘晓东（2013）. 自补偿液体静压精密转台轴承设计与实验. 《国防科技大学学报》.
81. 李圣怡，彭小强（2013）. 光学零件可控柔体制造的理论基础与方法. 《机械工程学报》.
82. 王彦哲，李圣怡，胡皓（2013）. 磁流变抛光工件自动定位原理与方法研究. 《航空精密制造技术》.
83. 张良，李圣怡，周林，解旭辉，丁杰（2013）. 基于法拉第杯的离子束抛光机束流密度检测研究. 《航空精密制造技术》.
84. Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dail, Zhuo Wang (2013). Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing. Optical Engineering.DOI
85. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2013). Material removal mode affected by the particle size in fluid jet polishing. Applied Optics.DOI
86. Chao Xie, Shengyi Li, Shangyong Chen, Yanglin Peng, Bing Song (2013). Optical wavefront measurement using phase retrieval with subaperture stitching method. Optik.DOI
87. Wenqiang Peng, Chaoliang Guan, Shengyi Li (2013). Ultrasmooth surface polishing based on the hydrodynamic effect. Applied Optics.DOI
88. Feng Shi, Yong Shu, Yifan Dai, Xiaoqiang Peng, Shengyi Li (2013). Magnetorheological elastic super-smooth finishing for high-efficiency manufacturing of ultraviolet laser resistant optics. Optical Engineering.DOI
89. Xuqing Nie, Shengyi Li, Yifan Dai, Ci Song (2013). A new polishing process for large-aperture and high-precision aspheric surface. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
90. Chao Xie, Shengyi Li, Shanyong Chen (2013). A method for calibrating the position error of phase retrieval with transverse translation diversity in optical wavefront measurement. Optik.DOI
91. Xiaobo Zuo, Wang Jian-min, Ziqiang Yin, Shengyi Li (2013). Performance Analysis of Multirecess Angled-Surface Slot-Compensated Conical Hydrostatic Bearing. Journal of Tribology.DOI
92. Xiaobo Zuo, Jianmin Wang, Ziqiang Yin, Shengyi Li (2013). Comparative performance analysis of conical hydrostatic bearings compensated by variable slot and fixed slot. Tribology International.DOI
93. Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dai, Zhuo Wang (2013). Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing. Optical Engineering.DOI
94. Shanyong Chen, Chunyu Zhao, Yifan Dai, Shengyi Li (2013). Stitching algorithm for subaperture test of convex aspheres with a test plate. Optics & Laser Technology.DOI
95. Shengyi Li (2013). Basic Theory and Method of Controllable Compliant Tools for Optic Elements Manufacturing. Journal of Mechanical Engineering.DOI
96. Xiaobo Zuo, Shengyi Li, Ziqiang Yin, Wang Jian-min (2013). Design and Parameter Study of a Self-Compensating Hydrostatic Rotary Bearing. International Journal of Rotating Machinery.DOI
97. 舒谊，周林，解旭辉，廖文林，李圣怡（2012）. 离子束倾斜入射抛光对表面粗糙度的影响. Nanotechnology and Precision Engineering.
98. 曾育伟，李圣怡，戴一帆，彭小强，胡皓，聂徐庆（2012）. KDP晶体的磁流变抛光工艺研究. 《航空精密制造技术》.
99. Chao Xie, Shengyi Li, Linyan Ding, Shangyong Chen (2012). Phase retrieval technology for off-axis ellipsoid surface test with a high dynamic range algorithm. Optik.DOI
100. Yin Wang, Shengyi Li, Xiaoqiang Peng, Xuqing Nie, Ci Song (2012). Study on combination technology in off-axis asphere manufacture. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
101. Yong Shu, Shengyi Li, Xiaobo Zuo, Ci Song, Yin Wang (2012). Novel method for fabricating steep aspheric mirrors. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
102. Yong Liu, Shengyi Li, Ziqiang Yin, Chaoliang Guan (2012). Ultra-precision stylus measurement of micro V-groove array for optical fiber location. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
103. Shanyong Chen, Wenlin Liao, Yifan Dai, Shengyi Li (2012). Self-calibrated subaperture stitching test of hyper-hemispheres using latitude and longitude coordinates. Applied Optics.DOI
104. Xuhui Xie, Hao Yu, Lin Zhen Zhou, Yifan Dai, Shengyi Li (2012). High thermal expansion optical component machined by ion beam figuring. Optical Engineering.DOI
105. Shengyi Li (2012). Impact of Oblique Incidence in Ion Beam Figuring on Surface Roughness. Nanotechnology and Precision Engineering.
106. 彭文强，吴宇列，李圣怡，刘勇（2011）. 光波导微模具飞切加工工艺. 《国防科技大学学报》.
107. 李圣怡（2011）. 大中型光学非球面镜制造与测量新技术 = New technology for manufacturing and measurement of large and middle-scale aspheric surfaces. 《国防工业出版社》.
108. 王雄，肖定邦，周泽龙，陈志华，吴学忠，李圣怡（2011）. 新型摇摆质量微陀螺的设计与制作(英文). Nanotechnology and Precision Engineering.
109. 舒谊，周林，戴一帆，沈永祥，解旭辉，李圣怡（2011）. 离子束作用下KDP晶体表面粗糙度研究. 《人工晶体学报》.
110. 袁磊，李圣怡，彭小强，胡皓（2011）. 磁流变机床误差分析和加工工艺优化. 《航空精密制造技术》.
111. Shanyong Chen, Yifan Dai, Shengyi Li, Xiaoqiang Peng, Jianmin Wang (2011). Error reductions for stitching test of large optical flats. Optics & Laser Technology.DOI
112. Xuhui Xie, Lin Zhen Zhou, Yifan Dai, Shengyi Li (2011). Ion beam machining error control and correction for small scale optics. Applied Optics.DOI
113. Shengyi Li (2011). Study on Surface Roughness of KDP Crystal in Ion Beam Figuring. Rengong jingti xuebao.
114. Yong Liu, Ziqiang Yin, Shengyi Li, Yulie Wu, Yifan Dai (2011). Topography simulation and vibration analysis of ultra-precision diamond flycutting micro V-groove. International Journal of Nanomanufacturing.DOI
115. 李圣怡（2010）. 国防工业的先进制造技术. 《国防科技》.
116. 丁凌艳，吴宇列，李圣怡（2010）. 相位恢复测量长焦距镜面(英文). 《光子学报》.
117. 贾立德，王家伍，李婷，李圣怡（2010）. 高精度接触式扫描测头动态特性分析. 《航空精密制造技术》.
118. Shanyong Chen, Shengyi Li, Yifan Dai, Xiaoqiang Peng, Weiwei Zhang (2010). Fast and precise registration of quasi-planar free-form wavefronts. Journal of the Optical Society of America A.DOI
119. Zhaoze Li, Shengyi Li, Yifan Dai, Xiaoqiang Peng (2010). Optimization and application of influence function in abrasive jet polishing. Applied Optics.DOI
120. Lingyan Ding, Yulie Wu, Shengyi Li, Yang Liao, Yong Shu (2010). Phase retrieval in situ measurement for large aperture parabolic mirror. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
121. Shengyi Li, Xuhui Xie, Yifan Dai (2010). Research on controllable compliant tools (CCT) theory and technology. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
122. Changjun Jiao, Shengyi Li, Xuhui Xie, Shanyong Chen, Dongliang Wu, Nianhui Kang (2010). Figuring algorithm for high-gradient mirrors with axis-symmetrical removal function. Applied Optics.DOI
123. 徐从启，解旭辉，戴一帆，李圣怡（2009）. 新型蠕动式微型管道机器人的牵引力及爬坡能力研究. 《机械科学与技术》.
124. 贾立德，王家伍，郑子文，李圣怡，戴一帆（2009）. 光学非球面形摆臂式轮廓法测量顶点曲率半径优化算法研究. 《仪器仪表学报》.DOI
125. 解旭辉，焦长君，李圣怡，段纬然，周林（2009）. 离子束螺旋扫描方式修正光学镜面方法. 《机械工程学报》.
126. 肖定邦，吴学忠，侯占强，陈志华，李圣怡（2009）. 基于双正弦载波调制的微陀螺测控电路研究. 《兵工学报》.
127. 王卓，吴宇列，戴一帆，李圣怡，鲁德凤，徐惠赟（2009）. 光学材料抛光亚表面损伤检测及材料去除机理. 《国防科技大学学报》.
128. 肖定邦，侯占强，满海鸥，吴学忠，李圣怡（2009）. 微陀螺闭环驱动方法. 《国防科技大学学报》.
129. 丁凌艳，吴宇列，李圣怡（2009）. 相位恢复镜面检测性能研究. 《国防科技大学学报》.
130. 周林，戴一帆，解旭辉，李圣怡（2009）. 计算机控制抛光中基于等面积增长螺旋线的加工路径. 《国防科技大学学报》.
131. 康念辉，李圣怡，郑子文（2009）. 化学气相沉积碳化硅超光滑抛光机理与表面粗糙度影响因素. 《国防科技大学学报》.
132. 肖定邦，吴学忠，侯占强，陈志华，董培涛，李圣怡 (2009). High-performance micromachined gyroscope with a slanted suspension cantilever. Journal of Semiconductors.
133. 徐从启，戴一帆，解旭辉，李圣怡（2009）. 三维受限刚体的摩擦接触分析. 《高技术通讯》.
134. 李圣怡，焦长君，解旭辉，周林（2009）. 离子束修正光学镜面误差中拼接加工方法研究. 《中国科学:技术科学》.
135. 周林，戴一帆，解旭辉，李圣怡（2009）. 计算机控制光学表面成形中的频域分析. 《中国科学:技术科学》.
136. 戴一帆，石峰，彭小强，李圣怡（2009）. 基于熵增原理抑制磁流变抛光中高频误差. 《中国科学:技术科学》.
137. 李圣怡（2009）. 超精密加工技术与机床的新进展. 《航空精密制造技术》.
138. 谢超，李圣怡，彭小强，宋辞（2009）. 机床定位精度对磁流变抛光的影响分析. 《航空精密制造技术》.
139. 刘勇，吴宇列，李圣怡（2009）. 基于普通车床的微V型槽飞切装置分析与设计. 《航空精密制造技术》.
140. 张发，李圣怡，尹自强，胡皓（2009）. 基于磁流变斑点法的热压多晶氟化镁加工亚表面损伤实验研究. 《航空精密制造技术》.
141. 贾立德，李婷，王家伍，李圣怡，李云骄（2009）. 高精度接触式测头测量力影响分析与建模*. 《航空精密制造技术》.
142. 李圣怡（2009）. 超精密加工技术成就现代国防. 《国防制造技术》.
143. 肖定邦，侯占强，谢立强，吴学忠，李圣怡（2009）. 基于二次谐波检测的电容式微惯性器件频率响应测试方法研究. 《传感技术学报》.
144. 王浩旭，谢立强，吴学忠，李圣怡（2009）. 石英湿法腐蚀及侧壁晶棱修平工艺研究. 《传感技术学报》.
145. 李圣怡，胡晓军，吴宇列（2009）. 大镜面在位检测中的相位恢复技术研究. 《光子学报》.
146. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2009). Optimum removal in ion-beam figuring. Precision Engineering.DOI
147. Shengyi Li, Changjun Jiao, Xuhui Xie, Lin Zhen Zhou (2009). Stitching algorithm for ion beam figuring of optical mirrors. Science China Technological Sciences.DOI
148. Yifan Dai, Shanyong Chen, Nianhui Kang, Shengyi Li (2009). Error calculation for corrective machining with allowance requirements. The International Journal of Advanced Manufacturing Technology.DOI
149. Yifan Dai, Feng Shi, Xiaoqiang Peng, Shengyi Li (2009). Restraint of mid-spatial frequency error in magneto-rheological finishing (MRF) process by maximum entropy method. Science China Technological Sciences.DOI
150. Changjun Jiao, Shengyi Li, Xuhui Xie (2009). Figuring technology of nonaxisymmetric errors with a spiral path. Applied Optics.DOI
151. Changjun Jiao, Shengyi Li, Xuhui Xie (2009). Algorithm for ion beam figuring of low-gradient mirrors. Applied Optics.DOI
152. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2009). Frequency-domain analysis of computer-controlled optical surfacing processes. Science China Technological Sciences.DOI
153. Yulie Wu, Haitao Yang, Shengyi Li (2009). Online measurement and correction of post-weld shift in laser welding packaging for laser diodes. The International Journal of Advanced Manufacturing Technology.DOI
154. Ci Song, Yifan Dai, Xiaoqiang Peng, Shengyi Li, Feng Shi (2009). Deterministic magnetorheological finishing of optical aspheric mirrors. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
155. Shengyi Li (2009). Design and Analysis Micro V-groove Fly-cutting System Based on Conventional Lathe. Hangkong jingmi zhizao jishu.
156. Shengyi Li (2009). Realization of Velocity Mode in Flat Optics Machining Using Ion Beam.
157. Shengyi Li (2009). In-situ Surface Measurement for Large Aperture Optical Mirror Based on Phase Retrieval Technology. Chinese Journal of Mechanical Engineering.
158. 徐从启，解旭辉，戴一帆，李圣怡（2008）. 微小管道机器人适应不同管径的3种调节机构的力学分析. 《机械科学与技术》.
159. 徐从启，解旭辉，戴一帆，李圣怡，尚建忠（2008）. 一种新型蠕动式微小管内机器人的研制. 《机械设计与研究》.
160. 康念辉，李圣怡，郑子文（2008）. 基于多体系统理论的非球面磨削误差模型与补偿技术. 《机械工程学报》.
161. 王卓，吴宇列，戴一帆，李圣怡（2008）. 研磨加工中光学材料亚表面损伤的表征方法. Nanotechnology and Precision Engineering.
162. 焦长君，李圣怡，戴一帆（2008）. 基于椭圆路径的回转二次曲面铣磨误差模型研究. 《航空精密制造技术》.
163. 王卓，吴宇列，戴一帆，李圣怡，周旭升（2008）. 光学材料研磨亚表面损伤的快速检测及其影响规律. 《光学精密工程》.
164. 李圣怡（2008）. 保形红外光学元件制造技术. 《航空制造技术》.
165. 焦长君，解旭辉，李圣怡，周林（2008）. 光学镜面离子束加工的材料去除效率. 《光学精密工程》.
166. 肖定邦，吴学忠，李伟东，董培涛，侯占强，李圣怡（2008）. 一种具有隔振框架的解耦硅微陀螺. Journal of Semiconductors.
167. 郑子文，翁雷，陈善勇，李圣怡（2008）. 高精度六面体垂直度误差测量的一种新方法. 《光学技术》.
168. 焦长君，李圣怡，解旭辉，王登峰，周林（2008）. 光学镜面离子束加工去除函数工艺可控性分析. 《光学技术》.
169. 康念辉，李圣怡，戴一帆，吴宇列（2008）. 碳化硅反射镜坯体光学加工的残余应力测量与分析. 《光学技术》.
170. 戴一帆，周林，解旭辉，焦长君，李圣怡（2008）. 应用离子束进行光学镜面确定性修形的实现. 《光学学报》.
171. 刘志军，李圣怡，王卓，彭小强（2008）. 光学元件抛光亚表面损伤实验研究. 《航空精密制造技术》.
172. 翁雷，郑子文，李圣怡（2008）. 超声研磨工具的有限元优化设计. 《航空精密制造技术》.
173. Zhuo Wang, Yulie Wu, Yifan Dai, Shengyi Li (2008). Subsurface damage distribution in the lapping process. Applied Optics.DOI
174. Shanyong Chen, Shengyi Li, Yifan Dai, Lingyan Ding, Shengyue Zeng (2008). Experimental study on subaperture testing with iterative stitching algorithm. Optics Express.DOI
175. Shengyi Li (2008). A novel method for perpendicularity measurement of high precision hexahedron. Optical Technique.
176. Shengyi Li (2008). Characterization of Subsurface Damage of Optical Materials in Lapping Process. Nanotechnology and Precision Engineering.
177. Shengyi Li (2008). Finite Element Optimum Design for Ultrasonic Lapping Tool. Hangkong jingmi zhizao jishu.
178. Xiaojun-Hu, Shengyi-Li, Yulie-Wu (2008). Resolution-enhanced subpixel phase retrieval method. Applied Optics.DOI
179. 张学成，戴一帆，李圣怡，彭小强（2007）. 基于CFD的磁射流抛光去除机理分析. 《国防科技大学学报》.
180. 王金娥，郑煜，吴宇列，李圣怡（2007）. 熔锥型保偏光纤耦合器耦合系数分析. 《国防科技大学学报》.
181. 谢立强，吴学忠，李圣怡（2007）. 石英微陀螺的机械耦合问题研究. 《国防科技大学学报》.
182. Xiaojun Hu, Shengyi Li, Yulie Wu (2007). High resolution test for large optics with sub-pixel phase retrieval method. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
183. Shengyi Li, Zhuo Wang, Yulie Wu (2007). Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes. Journal of Materials Processing Technology.DOI
184. Xusheng Zhou, Shengyi Li, Yifan Dai, Xuhui Xie (2007). Optimized method for manufacturing large aspheric surfaces. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
185. Lin Zhen Zhou, Xuhui Xie, Yifan Dai, Changjun Jiao, Shengyi Li (2007). Ion beam figuring system in NUDT. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
186. Xuecheng Zhang, Yifan Dai, Shengyi Li, Xiaoqiang Peng (2007). Optimization of removal function for magnetorheological jet polishing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
187. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2007). Testing of large optical surfaces with subaperture stitching. Applied Optics.DOI
188. Yulie Wu, Aicheng Zhang, Jing Chun, Shengyi Li (2007). Simulation and Experimental Study of Laser Hammering for Laser Diode Packaging. IEEE Transactions on Components and Packaging Technologies.DOI
189. Shengyi Li (2007). Model and Method to Determine Dwell Time in Ion Beam Figuring. Nanotechnology and Precision Engineering.
190. Shengyi Li (2007). Principle and experiments of swing-arm profilometer. Optics and Precision Engineering.
191. Shengyi Li (2007). Finite Element Analysis and Experimental Observation on Post-Weld-Shift in Laser Welding Technique for Opto-electronic Devices. Journal of Optoelectronics·laser.
192. Shengyi Li (2007). ACCESSMENT OF APERIODIC SPINDLE ERROR MOTION IN SINGLE CIRCLE. Chinese Journal of Mechanical Engineering.
193. 李伟东，吴学忠，李圣怡（2006）. 一种压阻式微压力传感器. 《仪表技术与传感器》.
194. 张金江，吴宇列，解旭辉，李圣怡（2006）. 基于ADSP2181的红外导引头实时通用信号处理系统. 《现代制造工程》.DOI
195. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2006). Iterative algorithm for subaperture stitching test with spherical interferometers. Journal of the Optical Society of America A.DOI
196. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2006). Lattice design for subaperture stitching test of a concave paraboloid surface. Applied Optics.DOI
197. Nianhui Kang, Shengyi Li, Ziwen Zheng (2006). Research on geometric model of grinding large and medium scales optical aspheric surfaces. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
198. Changjun Jiao, Shengyi Li, Yifan Dai (2006). Line-contact maching of conic surfaces of revolution and error analysis. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
199. Xusheng Zhou, Shengyi Li (2006). Application of maximum entropy principle in plane lapping. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
200. Shanyong Chen, Shengyi Li, Yifan Dai (2006). An efficient iterative algorithm for subaperture stitching interferometry for aspheric surface. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
201. Shengyi Li (2006). Analysis and Design of Magnetic Field for MJP. Hangkong jingmi zhizao jishu.
202. Shengyi Li (2006). Orthogonal experiment and analysis on polishing parameters of MRF. Optical Technique.
203. Shengyi Li (2006). NONLINEAR MODELLING AND FEEDBACK LINEARIZATION OF VAVLE-CONTROLLED ASYMMETRICAL CYLINDER. Chinese Journal of Mechanical Engineering.
204. 任永平，李圣怡（2005）. 模糊控制曲面的参数设计和曲面估算. 《兵工自动化》.
205. 任永平，李圣怡（2005）. 一种时变准滑模变结构控制器设计. 《测控技术》.DOI
206. 任永平，李圣怡（2005）. 一种新型控制器的设计方法. 《控制与决策》.
207. 淳静，吴宇列，戴一帆，李圣怡（2005）. 光纤有源器件封装制造中的自动对准方法研究. 《中国机械工程》.
208. 林哲辉，王金娥，吴宇列，李圣怡（2005）. 保偏光纤自动化定轴方法研究. 《光通信技术》.
209. 刘危，解旭辉，李圣怡（2005）. 捷联惯性导航系统的姿态算法. 《北京航空航天大学学报》.
210. Shanyong Chen, Shengyi Li, Yifan Dai (2005). Iterative algorithm for subaperture stitching interferometry for general surfaces. Journal of the Optical Society of America A.DOI
211. Shengyi Li (2005). Nonlinear PID Controller and Its Parameter Analysis. Information and Computation.
212. Shengyi Li (2005). An Approach for Nonlinear PD Controller Design. Control Engineering of China.
213. Shengyi Li (2005). Design method of a kind of new controller. Kongzhi yu juece.
214. Shengyi Li (2005). Automatic alignment between a laser diode and a single-mode fiber. Guangdian gongcheng.
215. Shengyi Li (2005). Parameter Design and Evaluation of Fuzzy Control Surface. Ordnance Industry Automation.
216. 粟时平，李圣怡（2004）. 多体系统理论在数控加工精度软件预测中的应用. 《组合机床与自动化加工技术》.
217. 刘钢，吴智勇，李圣怡，范大鹏，胡德文（2004）. 轨迹已知类伺服系统运动控制的工程实现. 《组合机床与自动化加工技术》.
218. 李圣怡，尹自强（2004）. 超精密工件在线直线度多传感器测量方法. Nanotechnology and Precision Engineering.
219. 淳静，吴宇列，戴一帆，李圣怡（2004）. 激光二极管与单模光纤自动对准搜索算法. 《国防科技大学学报》.
220. 刘危，解旭辉，李圣怡（2004）. 捷联惯导系统的圆锥误差补偿算法研究. 《南京航空航天大学学报(自然科学版)》.
221. 李圣怡，刘宗林，吴学忠（2004）. 微加速度计研究的进展. 《国防科技大学学报》.
222. 刘钢，李圣怡，范大鹏（2004）. 机电伺服系统的预测函数控制算法研究. 《国防科技大学学报》.
223. 彭小强，戴一帆，李圣怡，尤伟伟（2004）. 回转对称非球面光学零件磁流变成形抛光的驻留时间算法. 《国防科技大学学报》.
224. 粟时平，李圣怡（2003）. 五轴数控机床综合空间误差的多体系统运动学建模. 《组合机床与自动化加工技术》.
225. 吴学忠，谢立强，李圣怡（2003）. 超磁致伸缩薄膜性能测试与评价. 《全球化、信息化、绿色化提升中国制造业——2003年中国机械工程学会年会论文集（微纳制造技术应用专题）》.
226. 颜树华，李圣怡，吴学忠，杨键（2003）. 并行直写系统制作微光学器件的理论研究. 《全球化、信息化、绿色化提升中国制造业——2003年中国机械工程学会年会论文集（微纳制造技术应用专题）》.
227. 尹自强，李圣怡（2003）. 振动影响下金刚石车削表面的形貌仿真. 《国防科技大学学报》.
228. 王贵林，李圣怡，戴一帆（2003）. 光学表面的分形特点与模拟表征算法. 《国防科技大学学报》.
229. 蒋根深，张明亮，解旭辉，李圣怡（2003）. M16C/62单片机在仪器仪表中的应用. 《自动化仪表》.
230. 王贵林，李圣怡，戴一帆（2003）. 光学非球面复合加工机床的设计与精度分析. 《中国机械工程》.
231. 解旭辉，戴一帆，李圣怡（2003）. 基于模糊滑模控制器的伺服跟踪控制研究. 《控制理论与应用》.
232. 刘危，解旭辉，李圣怡（2003）. 微机械惯性传感器的技术现状及展望. 《光学精密工程》.
233. 粟时平，李圣怡，王贵林（2003）. 基于鞍点规划法的形位误差计算机评定. 《计量学报》.
234. Yulie Wu, Xuezhong Wu, Guanfeng Liu, Shengyi Li (2003). Topology analysis of close-chain mechanisms. Proceedings - IEEE International Conference on Robotics and Automation/Proceedings.DOI
235. Shengyi Li (2003). Fuzzy sliding mode controller for servo tracking control in precision machine tools. Control theory & applications.
236. 沈辉，吴学忠，李圣怡，李泽湘（2002）. 并联机构的奇异位形分析及冗余驱动控制方法. 《国防科技大学学报》.
237. 郑子文，李圣怡（2002）. 超精密机床进给系统的QFT控制器的设计. 《国防科技大学学报》.
238. 陈志华，李圣怡，杨舜洲，崔红娟（2002）. 直线电机直接驱动的伺服刀架控制器的研究. 《控制理论与应用》.
239. 王贵林，李圣怡，戴一帆（2002）. 空间相机SiC反射镜的制作. 《机械工程材料》.
240. 王宪平，戴一帆，李圣怡（2002）. 一般机构的解耦运动. 《国防科技大学学报》.
241. Jun Wu, Shengyi Li, Pan Mengchun (2002). A novel parameter identification method for induction motors.DOI
242. Shengyi Li (2002). Identification of relative vibration in ultra-precision turning. Optics and Precision Engineering.
243. 吴宇列，吴学忠，刘冠峰，李圣怡（2001）. 并联机构奇异点分析的新方法. 《国防科技大学学报》.
244. 粟时平，李圣怡，王贵林（2001）. 多轴数控机床的通用运动学综合空间误差模型. 《国防科技大学学报》.
245. 吴宇列，吴学忠，李圣怡（2001）. 冗余并联机构的PD控制. 《国防科技大学学报》.
246. 吴学忠，吴宇列，李圣怡（2001）. 平面二自由度并联执行机构的设计与实现. 《国防科技大学学报》.
247. 王兴波，李圣怡（2001）. 自动计算NURBS初始权因子的方法. 《航空学报》.
248. 刘阳，李圣怡，戴一帆（2001）. 基于CAD模型的工件定位算法研究. 《自动化学报》.
249. Bing Luo, Zhe-hui Lin, Shengyi Li, Yifan Dai (2001). Driving property of twist-roller friction mechanism in ultraprecision positioning system. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
250. Shengyi Li, Zhe-hui Lin, Bing Luo, Yifan Dai (2001). Gray-scale mask fabrication system for diffractive micro-optics. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
251. Xuezhong Wu, Yulie Wu, Shengyi Li (2001). Parallel manipulator for micro-assembly and micromachining. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
252. Shengyi Li (2001). Ultra-precision positioning and tracking using ballscrew. Optics and Precision Engineering.
253. 李圣怡，戴一帆，彭小强（2000）. 超精密加工机床及其新技术发展. 《国防科技大学学报》.
254. 郑子文，李圣怡，刘宗林（2000）. 滚珠丝杠传动机构的超精密定位及轨迹跟踪. 《第一届国际机械工程学术会议》.
255. 王宪平，李圣怡（2000）. 直线度误差分离方法的误差分析. 《仪器仪表学报》.DOI
256. 王兴波，李圣怡（2000）. 平面NURBS曲线的椭圆弧自适应逼近. 《国防科技大学学报》.
257. 李圣怡，张云洲，郑子文（2000）. DSP在超精密数控系统中的应用. 《机电工程》.
258. Shengyi Li (2000). Development of Ultra precision Manufacturing and Its Key Technologies. Zhongguo jixie gongcheng.
259. Shengyi Li (2000). Development of Ultra-Precision Machining Technology and Our Strategy. Zhongguo jixie gongcheng.
260. 张明亮，解旭辉，李圣怡（1999）. 开放性数控技术的发展. 《机电工程》.
261. 戴一帆，李圣怡，罗兵，彭莉（1999）. 扭轮摩擦驱动系统研究. 《国防科技大学学报》.
262. 柳卓之，李圣怡（1999）. 面向产品生命周期的虚拟制造系统结构. 《制造业自动化》.
263. 吴学忠，李圣怡，刘晓贵（1999）. 基于多传感器的刀具状态监测系统. 《数据采集与处理》.
264. 吴学忠，李圣怡（1998）. 复合神经网络模型在刀具状态监测中的应用. 《航空精密制造技术》.
265. 吴学忠，李圣怡，范大鹏（1998）. 刀具状态监测的模糊集方法. 《国防科技大学学报》.
266. 罗兵，李圣怡，李艾利（1998）. 超精密扭轮摩擦传动动力学研究. 《国防科技大学学报》.
267. 葛根焰，李圣怡，吴明根（1998）. 超精密CNC平面磨床在线测量、补偿加工及对刀功能的自动化实现. 《航空精密制造技术》.
268. 唐罗生，李圣怡，刘阳，柳卓之（1998）. PAI-CAD/CAM 模型及实现技术研究. 《国防科技大学学报》.
269. 柳卓之，李圣怡，王罗，唐罗生，魏桂林，刘西杰（1998）. 虚拟加工过程的建模与仿真. 《国防科技大学学报》.
270. 吴宇列，解健，李圣怡（1997）. 应用于超精密测量的电容传感器. 《航空精密制造技术》.
271. 付永红，李圣怡，马晓宇（1997）. 柔性制造系统机器人上下料技术研究. 《机械与电子》.
272. 李圣怡，范大鹏（1997）. 第九届国际精密工程、第四届超精密制造工程学术会议简介. 《国防科技》.
273. 解旭辉，廖德志，李圣怡（1997）. 超精密金刚石车床伺服进给数学模型. 《国防科技大学学报》.
274. 朱建忠，李圣怡，黄凯（1997）. 超精密机床变分法精度分析及其应用. 《国防科技大学学报》.
275. 解旭辉，李圣怡（1997）. 基于神经网络的超精密机床伺服进给非线性模型辨识. 《国防科技大学学报》.
276. 唐罗生，李圣怡，刘阳，柳卓之（1997）. 复杂零件产品虚拟开发技术研究. 《国防科技大学学报》.
277. 李圣怡，戴一帆（1997）. 超精密加工技术与现代武器制造. 《国防科技》.
278. 李圣怡（1995）. 智能制造技术基础：智能控制理论、方法及应用. 《国防科技大学出版社》.
279. 李圣怡（1995）. 智能制造技术和智能制造系统. 《国防科技大学学报》.
280. 李圣怡，谭捷，潘培元（1993）. 精密三点法——在线测量精密机床直线度的新方法. 《国防科技大学学报》.
281. 李圣怡，邹向阳，吴振峰（1992）. 压电执行器NLDDS及神经网络非线性建模与控制. 《国防科技大学学报》.
282. 李圣怡，梁建成（1992）. 超精加工中压电陶瓷刀具位置的自学习控制. 《国防科技大学学报》.
283. 李圣怡，C.James Li（1991）. 声发射分析用于轴承状态监测的研究. 《国防科技大学学报》.
284. 潘仲明，王世民，王浩凡，李圣怡（1988）. 压电微动伺服机构. 《国防科技大学学报》.

书籍章节

1. Xuhui Xie, Shengyi Li (2014). Ion Beam Figuring Technology. Springer eBooks.DOI

书籍

1. Shengyi Li, Yifan Dai (2016). Large and Middle‐Scale Aperture Aspheric Surfaces. Wiley eBooks.DOI