姜兆亮｜山东大学｜学者主页

2026

Heterogeneous interface control in direct ink writing of functionally graded ceramics

Lichao Gong, Zhaoliang Jiang, Siliang Wang, Xun Meng, Weiwei Guo

Additive manufacturing

DOI

2026

Fabrication, surface quality, and mechanical properties of graded zirconia/graphene oxide ceramics for bone tissue engineering

Cheng Zhang, Li Zhao, Zhen Wang, Zhaoliang Jiang, Mingxuan Li, Xiaolei Zhu, Xiaofeng Lu

Ceramics International

DOI

2025

Direct ink writing of functionally graded bone scaffolds using ceramic foams to mimic natural bone hierarchical porosity and multiple gradients

Weiwei Guo, Anquan Ma, Zhaoliang Jiang, Lichao Gong, Huawen Dai, Shiyuan Han

Composites Part B Engineering

DOI

2024

Hierarchically porous bone scaffold fabricated via direct foam writing with TCP/ZrO2 composite ink

Weiwei Guo, Junyuan Sun, Zhaoliang Jiang, Xinyu Liu, Jing Xu, Jing Wang, Honghao Zhong

Journal of Alloys and Compounds

DOI

2023

Research on the Construction of Virtual Simulation Training System for Intelligent Manufacturing Based on Outcomes - Based Education Concept

Jia-Qi Zhao, Jian-Yong Li, Jing-Fang Li, Jian-Feng Li, Kai Guo, Zhaoliang Jiang, Minghui Li

SHS Web of Conferences

DOI

2023

Regulation of residual stress in stereolithography printing of ZrO2 ceramics

Li Zhao, Zhaoliang Jiang, Cheng Zhang, Weiwei Guo

Ceramics International

DOI

2022

3D printing of multifunctional gradient bone scaffolds with programmable component distribution and hierarchical pore structure

Weiwei Guo, Zhaoliang Jiang, Honghao Zhong, Guopeng Chen, Xinde li, Hongru Yan, Cheng Zhang, Li Zhao

Composites Part A Applied Science and Manufacturing

DOI

2022

Impact of online mixing via KSM on the accuracy of ingredient deposition in manufacturing FGMs

Weiwei Guo, Zhaoliang Jiang, Honghao Zhong, Ruiyuan Hou, Jing Xu

International Journal of Mechanical Sciences

DOI

2022

Theoretical model based on stress waves and experimental verification of residual stress in stereolithography printed ZrO2 porous ceramics

Li Zhao, Zhaoliang Jiang, Songhua Ma, Cheng Zhang, Weiwei Guo

Ceramics International

DOI

2021

发动机装配线关键工位物料动态配送方法

刘玉浩，姜兆亮，阚平，王振武，崔毅刚

《包装工程》

DOI

2021

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Weiwei Guo, Zhaoliang Jiang, Zhaoliang Jiang, Cheng Zhang, Li Zhao, Zongxiang Jiang, Zongxiang Jiang, Xinde Li, Guopeng Chen

Journal of the European Ceramic Society

DOI

2021

Influence of 3D printing stress wave on residual stress

Li Zhao, Zhaoliang Jiang, Cheng Zhang, Wenping Liu

Europhysics Letters (EPL)

DOI

2021

Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography

Cheng Zhang, Zhaoliang Jiang, Zhaoliang Jiang, Li Zhao, Weiwei Guo, Zongxiang Jiang, Zongxiang Jiang, Xinde Li, Guopeng Chen

International Journal of Mechanical Sciences

DOI

2021

Theoretical modeling based on stress wave propagation and experimental verification of residual stress in stereolithography printed ZrO2 ceramic suspensions

Li Zhao, Zhaoliang Jiang, Zhaoliang Jiang, Cheng Zhang, Weiwei Guo, Zongxiang Jiang, Zongxiang Jiang, Xueqing Gao, Yigang Cui, Xiaorui Shi

Ceramics International

DOI

2021

Stability, rheological behaviors, and curing properties of 3Y–ZrO2 and 3Y–ZrO2/GO ceramic suspensions in stereolithography applied for dental implants

Cheng Zhang, Zhaoliang Jiang, Li Zhao, Weiwei Guo, Xueqing Gao

Ceramics International

DOI

2021

Development model and experimental characterization of residual stress of 3D printing PLA parts with porous structure

Li Zhao, Zhaoliang Jiang, Zhaoliang Jiang, Cheng Zhang, Zongxiang Jiang, Zongxiang Jiang

Applied Physics A

DOI

2020

Effect of graphene oxide on the mechanical, tribological, and biological properties of sintered 3Y–ZrO2/GO composite ceramics for dental implants

Cheng Zhang, Feilong Wang, Zhaoliang Jiang, Jing Quan Lan, Li Zhao, Pengchao Si

Ceramics International

DOI

2020

Residual stress and fracture toughness of sintered body of ZrO2-GO composite ceramics material

Li Zhao, Zhaoliang Jiang, Cheng Zhang

Ceramics International

DOI

2020

Mechanical properties and tribological behaviors of yttria-zirconia ceramics with additions of graphene oxide by hot-press sintering for dental implants

Cheng Zhang, Zhaoliang Jiang, Li Zhao

Surface Topography Metrology and Properties

DOI

2020

Synthesis and characterization of multilayer graphene oxide on yttria-zirconia ceramics for dental implant

Cheng Zhang, Zhaoliang Jiang, Li Zhao, Wenping Liu, Pengchao Si, Jing Quan Lan

Journal of materials research/Pratt's guide to venture capital sources

DOI

2020

Generation mechanism of stress wave while milling aluminium 2219

Zhaoliang Jiang, Guanglun Li, Li Zhao, Ziqun Zhang

Australian Journal of Mechanical Engineering

DOI

2019

A detection algorithm of spatter on welding plate surface based on machine vision

Xin-miao Xia, Zhaoliang Jiang, Peng-fei Xu

Optoelectronics Letters

DOI

2019

Modeling Drying-Energy Consumption in Automotive Painting Line Based on ANN and MLR for Real-Time Prediction

Songhua Ma, Zhaoliang Jiang, Wenping Liu

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2018

汽车三维在线展示与虚拟试驾系统研究

赵阳，姜兆亮，马嵩华，朱先萌

《包装工程》

2018

无色差光滑曲面特征点的提取及匹配算法

许鹏飞，姜兆亮，赵阳，朱先萌

《光学学报》

2017

多品种小批量产品冲压计划排程多目标优化

朱先萌，姜兆亮，魏清月，马嵩华

《计算机集成制造系统》

DOI

2017

Multi-variation propagation prediction based on multi-agent system for complex mechanical product design

Songhua Ma, Zhaoliang Jiang, Wenping Liu

Concurrent Engineering

DOI

2017

Design Property Network-Based Change Propagation Prediction Approach for Mechanical Product Development

Songhua Ma, Zhaoliang Jiang, Wenping Liu, Chuanzhen Huang

Chinese Journal of Mechanical Engineering

DOI

2016

汽车涂装生产线能耗监测系统

魏清月，姜兆亮，张子群

《组合机床与自动化加工技术》

2016

Evaluation of a design property network-based change propagation routing approach for mechanical product development

Songhua Ma, Zhaoliang Jiang, Wenping Liu

Advanced Engineering Informatics

DOI

2016

Configuration semantics representation: A rule-based ontology for product configuration

Sisi Xuanyuan, Yan Li, Lalit Patil, Zhaoliang Jiang

2016 SAI Computing Conference (SAI)

DOI

2016

A design change analysis model as a change impact analysis basis for semantic design change management

Songhua Ma, Zhaoliang Jiang, Wenping Liu

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2015

双点压板夹紧对薄板件铣削平面度的影响研究

邵为宪，姜兆亮，仪维，韩祥程

《工具技术》

2015

Temperature Simulation and Control System for Automobile Coating Line Drying Rooms

Zhaoliang Jiang, Wenping Liu, Qingyue Wei, Zhishen Li

Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing

DOI

2014

A novel prediction model for thin plate deflections considering milling residual stresses

Zhaoliang Jiang, Yumei Liu, Lin Li, Weixian Shao

The International Journal of Advanced Manufacturing Technology

DOI

2013

基于PLC的夹紧力在线调控系统

崔宇清，姜兆亮，仪维

《机电工程》

2013

Mixed-Model Assembly Line Sequencing Optimization Based on Workstation Overload Analysis

Zhaoliang Jiang, Zhi Li

DOI

2012

Order-oriented cooperative sequencing optimisation in multi-mix-model assembly lines

Zhaoliang Jiang, Lin Li, Zhi Li, Zhaoqian Li

International Journal Of Production Research，Vol. 500, No. 24

DOI

2011

Inventory-shortage driven optimisation for product configuration variation

Zhaoliang Jiang, Sisi Xuanyuan, Lin Li, Zhaoqian Li

International Journal Of Production Research，Vol. 490, No. 4

DOI

2011

基于UG的整体硬质合金立铣刀数字化建模

张晓东，姜兆亮，陈露露

《组合机床与自动化加工技术》

2011

基于薄板件装夹变形控制的夹紧点位置优化方法研究

刘玉梅，姜兆亮，刘文平，李智，张晓东

《组合机床与自动化加工技术》

2010

基于设计规范的产品三维建模方法研究

姜兆亮，陈露露，范志君，尹涛

《制造技术与机床》

2010

Case reuse based product fuzzy configuration

Sisi Xuanyuan, Zhaoliang Jiang, Yan Li, Zhaoqian Li

Advanced Engineering Informatics

DOI

2010

Assembly sequencing oriented product configuration optimization

Zhaoliang Jiang, Wenping Liu, Sisi Xuanyuan

2009

基于双层配置体系的产品配置算法研究

轩辕思思，姜兆亮，李岩，李兆前

《计算机集成制造系统》

2009

产品配置的模糊求解及优化算法研究

轩辕思思，姜兆亮，李岩，李兆前

《武汉理工大学学报》

2009

基于本体的产品配置知识模型的研究

轩辕思思，姜兆亮，李岩，李兆前

《机械工程师》

2008

大规模定制下的汽车销售订单生命周期管理

姜兆亮，王桂从，李兆前，轩辕思思

《控制工程》

2008

Supplier selection and order splitting in multiple-sourcing inventory systems

Guicong Wang, Zhaoliang Jiang, Zhaoqian Li, Wenping Liu

Frontiers of Mechanical Engineering in China

DOI

2008

Multi-Objective Optimization of Product Configuration

Sisi Xuanyuan, Zhaoliang Jiang, Lalit Patil, Yan Li, Zhaoqian Li

DOI

2007

基于制造联盟的采购管理过程优化研究

王桂从，姜兆亮，刘文平，亓茂富，李兆前

《工具技术》

2007

协同供应下的库存控制及供应商选择

王桂从，姜兆亮，李兆前

《现代制造工程》

DOI

2007

A Simulation Study of Logistics Activities in Mixed-model Assembly Lines with Genetic Algorithm

Wenping Liu, Zhaoliang Jiang, Guicong Wang, Zhaoqian Li

IEEE International Conference on Automation and Logistics (ICAL)

DOI

2006

协同集成反求工程系统关键技术研究

崔焕勇，高琦，姜兆亮，李兆前

《组合机床与自动化加工技术》

2005

汽车覆盖件模具协同报价系统集成

郑波，姜兆亮，孙家坤

《模具工业》

2005

基于Web的分布式协同设计平台的开发

姜兆亮，王桂从，李兆前

《工具技术》

2005

基于协同设计的虚拟项目管理系统

郑波，高琦，姜兆亮，孙家坤

《工具技术》

2004

基于Web的分布式工作流管理系统

姜兆亮，李兆前，高琦，冯仕红，杨超英

《工具技术》

2004

基于BOM的PDM与CAPP系统集成研究

姜兆亮，李兆前，郑波，冯仕红，黄传真，高琦，杨超英

《现代制造工程》

DOI

2004

基于MAS的企业动态联盟CSCPP

姜兆亮，李兆前，高琦，郑波，杨超英

《制造技术与机床》

2004

PDM在汽车模具行业的应用

姜兆亮，李兆前，冯仕红，郑场波，杨超英

《工具技术》

2004

基于Web的计算机协同工作流管理系统

郑波，高琦，姜兆亮

《山东大学学报(工学版)》

2004

基于CSCW的复杂产品协同工艺设计

姜兆亮，郑波，冯仕红，崔焕勇，李兆前，杨超英

《计算机工程》

2003

基于iMAN的CAPP系统——WIT-CAPP

姜兆亮

《智能制造》

2003

客户化CAPP系统的研制与开发

姜兆亮，李兆前，冯仕红，郑波，杨超英

《成组技术与生产现代化》

2002

SDWIT-CAPP2000集成化工艺设计与工艺管理系统

姜兆亮，孙恒建

《智能制造》

精选作品

期刊论文

Heterogeneous interface control in direct ink writing of functionally graded ceramics

Fabrication, surface quality, and mechanical properties of graded zirconia/graphene oxide ceramics for bone tissue engineering

Direct ink writing of functionally graded bone scaffolds using ceramic foams to mimic natural bone hierarchical porosity and multiple gradients

Hierarchically porous bone scaffold fabricated via direct foam writing with TCP/ZrO2 composite ink

Research on the Construction of Virtual Simulation Training System for Intelligent Manufacturing Based on Outcomes - Based Education Concept

Regulation of residual stress in stereolithography printing of ZrO2 ceramics

3D printing of multifunctional gradient bone scaffolds with programmable component distribution and hierarchical pore structure

Impact of online mixing via KSM on the accuracy of ingredient deposition in manufacturing FGMs

Theoretical model based on stress waves and experimental verification of residual stress in stereolithography printed ZrO2 porous ceramics

发动机装配线关键工位物料动态配送方法

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Influence of 3D printing stress wave on residual stress

Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography

Theoretical modeling based on stress wave propagation and experimental verification of residual stress in stereolithography printed ZrO2 ceramic suspensions

Stability, rheological behaviors, and curing properties of 3Y–ZrO2 and 3Y–ZrO2/GO ceramic suspensions in stereolithography applied for dental implants

Development model and experimental characterization of residual stress of 3D printing PLA parts with porous structure

Effect of graphene oxide on the mechanical, tribological, and biological properties of sintered 3Y–ZrO2/GO composite ceramics for dental implants

Residual stress and fracture toughness of sintered body of ZrO2-GO composite ceramics material

Mechanical properties and tribological behaviors of yttria-zirconia ceramics with additions of graphene oxide by hot-press sintering for dental implants

Synthesis and characterization of multilayer graphene oxide on yttria-zirconia ceramics for dental implant

Generation mechanism of stress wave while milling aluminium 2219

A detection algorithm of spatter on welding plate surface based on machine vision

Modeling Drying-Energy Consumption in Automotive Painting Line Based on ANN and MLR for Real-Time Prediction

汽车三维在线展示与虚拟试驾系统研究

无色差光滑曲面特征点的提取及匹配算法

多品种小批量产品冲压计划排程多目标优化

Multi-variation propagation prediction based on multi-agent system for complex mechanical product design

Design Property Network-Based Change Propagation Prediction Approach for Mechanical Product Development

汽车涂装生产线能耗监测系统

Evaluation of a design property network-based change propagation routing approach for mechanical product development

Configuration semantics representation: A rule-based ontology for product configuration

A design change analysis model as a change impact analysis basis for semantic design change management

双点压板夹紧对薄板件铣削平面度的影响研究

Temperature Simulation and Control System for Automobile Coating Line Drying Rooms

A novel prediction model for thin plate deflections considering milling residual stresses

基于PLC的夹紧力在线调控系统

Mixed-Model Assembly Line Sequencing Optimization Based on Workstation Overload Analysis

Order-oriented cooperative sequencing optimisation in multi-mix-model assembly lines

Inventory-shortage driven optimisation for product configuration variation

基于UG的整体硬质合金立铣刀数字化建模

基于薄板件装夹变形控制的夹紧点位置优化方法研究

基于设计规范的产品三维建模方法研究

Case reuse based product fuzzy configuration

Assembly sequencing oriented product configuration optimization

基于双层配置体系的产品配置算法研究

产品配置的模糊求解及优化算法研究

基于本体的产品配置知识模型的研究

大规模定制下的汽车销售订单生命周期管理

Supplier selection and order splitting in multiple-sourcing inventory systems

Multi-Objective Optimization of Product Configuration

基于制造联盟的采购管理过程优化研究

协同供应下的库存控制及供应商选择

A Simulation Study of Logistics Activities in Mixed-model Assembly Lines with Genetic Algorithm

协同集成反求工程系统关键技术研究

汽车覆盖件模具协同报价系统集成

基于Web的分布式协同设计平台的开发

基于协同设计的虚拟项目管理系统

基于Web的分布式工作流管理系统

基于BOM的PDM与CAPP系统集成研究

基于MAS的企业动态联盟CSCPP

PDM在汽车模具行业的应用

基于Web的计算机协同工作流管理系统

基于CSCW的复杂产品协同工艺设计

基于iMAN的CAPP系统——WIT-CAPP

客户化CAPP系统的研制与开发

SDWIT-CAPP2000集成化工艺设计与工艺管理系统

会议论文

Multi-objective Optimization of Order Oriented Mixed-Model Assembly line sequencing Problem

A Non-Dominated Sorting Particle Swarm Optimization Algorithm For Mixed-Model Assembly Line Sequencing Problem

预印本

Core-Shell Coating Structure in Digital Light Processing of Zro2 Ceramics and its Microstructure Evolution on Mechanical Properties

Effects of Sintering Behaviors on Dimensional Accuracy, Surface Quality, and Mechanical Properties of Stereolithography-printed 3Y-ZrO2 Ceramics

研究方向