郑瑶

2026

机房智能化管理应用方案研究

《机电一体化》

2026

Faster R-CNN With Variable-Sensitive Map for UAVs Fault Detection: Addressing Simultaneous Sensor Faults in Autonomous Flights

IEEE Transactions on Instrumentation and Measurement

DOI

2026

Real-time reciprocal collision avoidance trajectory planning for quadrotor tail-sitter UAV swarms

Aerospace Science and Technology

DOI

2026

Tilting rotor aerodynamic performance prediction based on vortex particle method coupled with large eddy simulation

AIP Advances

DOI

2025

Ground effect on the aerodynamic characteristics and flow structure of a hovering dragonfly

The Physics of Fluids

DOI

2025

Mimic biological flapping motion for a two-dimensional wing by reinforcement learning

Bioinspiration & Biomimetics

DOI

2025

Effects of interval blowing on drag reduction in compressible channel turbulent flows

The Physics of Fluids

DOI

2025

Numerical investigation on flow field and heat transfer in the combustor coupled with turbine guide vanes under different contraction ratios

International Journal of Heat and Mass Transfer

DOI

2025

Supersonic aircraft aerodynamic performance prediction based on machine learning approach

AIP Advances

DOI

2025

Numerical simulation of unsteady aerodynamic characteristics for a variable-sweep aircraft

The Physics of Fluids

DOI

2025

Asymmetry in drag reduction and increase via blowing/suction control in compressible channel flows

The Physics of Fluids

DOI

2025

Plasma actuation control of circular cylinder wake: Eulerian and Lagrangian perspective analysis

The Physics of Fluids

DOI

2025

Multi-fidelity Bayesian neural networks for aerodynamic data fusion with heterogeneous uncertainties

Computer Methods in Applied Mechanics and Engineering

DOI

2025

Aerodynamic Optimization of Airfoil in Wide Range of Operating Conditions Based on Reinforcement Learning

Aerospace

DOI

2025

Drag Reduction in Compressible Channel Turbulence with Periodic Interval Blowing and Suction

Applied Sciences

DOI

2024

基于深度学习的ChatGPT中文语音自动识别方法

《无线互联科技》

2024

Three-Dimensional Trajectory Optimization for Quadrotor Tail-Sitter AAVs: Traversing Through Given Waypoints

IEEE Transactions on Aerospace and Electronic Systems

DOI

2024

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Engineering Failure Analysis

DOI

2024

Rapid generation and implementation of Dubins paths for fixed-wing UAVs

1st Aerospace Frontiers Conference (AFC 2024)

DOI

2024

Energy-Harvest for Orographic Soaring in the Monsoon Climate

Aerospace Science and Technology

DOI

2024

A general integration kernel formulation for immersed boundary method

The Physics of Fluids

DOI

2024

Assessment of turbulence adjoint method in sensitivity calculation and aerodynamic design optimization of turbomachinery cascades

Aerospace Science and Technology

DOI

2024

Performance sensitivity analysis and aerodynamic optimization of compressor cascades by a turbulence adjoint method

AIP Advances

DOI

2024

Preliminary Design and Optimization of Primary Structures for a Tilt-Duct UAV

Aerospace

DOI

2024

Experimental investigation on multiple-site fatigue failure of the hollow compressor impeller

Engineering Failure Analysis

DOI

2024

An early detection indicator of combustion instability for an industrial gas turbine combustor

The Physics of Fluids

DOI

2024

The effect of swirling injector geometry on the flow dynamics of precessing vortex core

The Physics of Fluids

DOI

2024

Learning mappings of thermal updraft fields under unknown operating conditions using a deep operator network

The Physics of Fluids

DOI

2024

An experimental investigation of groove control for reducing drag in a flat turbulent boundary layer

Ocean Engineering

DOI

2023

Intelligent perception of tandem flapping wings' flow field environment with sparse detectors

The Physics of Fluids

DOI

2023

Neck Structure Optimal Design of the Turbine Wheel for Containment Design of the Air Turbine Starter

Aerospace

DOI

2023

Investigating the potential of parallel hybrid-electric retrofit of narrow-body airliner for emission reduction

Proceedings of the Institution of Mechanical Engineers. Part G, Journal of Aerospace Engineering

DOI

2023

Study on multiple fatigue cracks growth in the web of a hollow compressor impeller

Engineering Fracture Mechanics

DOI

2022

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

AIAA AVIATION 2022 Forum

DOI

2021

Parallel realistic visualization of particle‐based fluid

Comput. Animat. Virtual Worlds

DOI

2021

Local flame and flow properties of propagating premixed turbulent flames during light-round process in a MICCA-type annular combustor

DOI

2021

A gradient-based method assisted by surrogate model for robust optimization of turbomachinery blades

Chinese Journal of Aeronautics

DOI

2021

From active learning to deep reinforcement learning: Intelligent active flow control in suppressing vortex-induced vibration

The Physics of Fluids

DOI

2021

Retrofit and New Design of Regional Aircraft with Hybrid Electric Propulsion

2021 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS)

DOI

2021

Direct numerical simulation of atomization by jet impact using moving particle semi-implicit method with GPU acceleration

Computational Particle Mechanics

DOI

2021

Multi-fidelity deep neural network surrogate model for aerodynamic shape optimization

Computer Methods in Applied Mechanics and Engineering

DOI

2020

浅谈虚拟仿真实验在培养应用型人才中的作用——以通信工程专业为例

《数码世界》

2020

基于CPLD的应急信号检测技术

《自动化应用》

DOI

2020

Optimal Tolerance Allocation in Blade Manufacturing by Sensitivity-Based Performance Impact Evaluation

DOI

2020

Adaptive Sliding Mode Control with Transition Process for Flapping Wing Aerial Vehicle

International Conference on Intelligent Human-Machine Systems and Cybernetics

DOI

2020

Access to Empirical Formulations of Combustion Efficiency for Gas Turbine Combustors With Improved Generalization Ability

DOI

2020

Improvement of Pressure Calculations in the Moving Particle Semi-Implicit Method for Free-Surface Flows

International Journal of Computational Methods

DOI

2020

Experimental investigation of the ignition dynamics in an annular premixed combustor with oblique-injecting swirling burners

Fuel

DOI

2020

Effects of Localized Micro-blowing on a Spatially Developing Flat Turbulent Boundary Layer

Flow Turbulence and Combustion

DOI

2020

Kinematic parameter optimization of a flapping ellipsoid wing based on the data-informed self-adaptive quasi-steady model

DOI

2019

一种控制软件体系结构复杂性的方法

《微电子学与计算机》

DOI

2019

Multi-fidelity Kinematic Parameter Optimization of Flapping Airfoil

2019

Parallel algorithms for moving boundary problems by local remeshing

Engineering computations

DOI

2019

Asymmetric heating and buoyancy effects on heat transfer of hydrocarbon fuel in a horizontal square channel at supercritical pressures

Aerospace Science and Technology

DOI

2019

Effects of Flow Control Devices on an Airfoil

Advances in Effective Flow Separation Control for Aircraft Drag Reduction

DOI

2019

Vortex induced vibration of a circular cylinder with a filament by using penalty immersed boundary method

Ocean Engineering

DOI

2019

Implementation of the moving particle semi-implicit method for free-surface flows on GPU clusters

Computer Physics Communications

DOI

2019

移动粒子半隐式方法 GPU 加速的双股射流撞击雾化模拟

DOI

2019

Experimental Investigation of the Flame Front Propagation Characteristic During Light-round Ignition in an Annular Combustor

Flow Turbulence and Combustion

DOI

2019

Aerodynamic Shape Optimization of a Turbine Blade Considering Geometric Uncertainty Using an Adjoint Method

Turbomachinery

DOI

2018

一种度量软件体系结构复杂性的方法

《微电子学与计算机》

DOI

2018

Buoyancy effects on supercritical-pressure conjugate heat transfer of aviation kerosene in horizontal tubes

Journal of Supercritical Fluids

DOI

2018

Parameter assessment for virtual Stackelberg game in aerodynamic shape optimization

DOI

2018

Conceptual design and optimization of scramjet engines using the exergy method

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2018

Design and optimization of three-dimensional supersonic asymmetric truncated nozzle

DOI

2018

Performance of flapping airfoil propulsion with LBM method and DMD analysis

DOI

2018

Scalable generation of large-scale unstructured meshes by a novel domain decomposition approach

Advances in Engineering Software

DOI

2017

Performance of a jaws inlet under off-design conditions

DOI

2017

Drag reduction via turbulent boundary layer flow control

Science China Technological Sciences

DOI

2017

Smoothed profile method and its applications in VIV

DOI

2017

A hybrid algorithm of lattice Boltzmann method and finite difference–based lattice Boltzmann method for viscous flows

DOI

2017

Automatic sizing functions for unstructured surface mesh generation

DOI

2017

Towards Virtual Testing of Flapping Flight

2017

Automatic Sizing Functions for 3D Unstructured Mesh Generation

DOI

2017

Improved boundary constrained tetrahedral mesh generation by shell transformation

DOI

2016

Booleans of triangulated solids by a boundary conforming tetrahedral mesh generation approach

Computers & graphics

DOI

2016

A multi-threaded parallel algorithm for quality improvement of tetrahedral meshes

2016

A New High-Order Compact Scheme of Unstructured Finite Volume Method

DOI

2016

Design and Verification of Minimum Length Nozzles with Specific/Variable Heat Ratio Based on Method of Characteristics

DOI

2016

マルチスレッド並列四面体メッシュ最適化アルゴリズムを提案した。【JST・京大機械翻訳】

2016

Performances analysis of asymmetric minimum length nozzles

Advances in Complex Systems

DOI

2016

Application of iterative learning tuning to a dragonfly-like flapping wing micro aerial vehicle

Chinese Control and Decision Conference

DOI

2016

Tetrahedral mesh improvement by shell transformation

Engineering computations

DOI

2016

A Parallel Local Reconnection Approach for Tetrahedral Mesh Improvement

DOI

2016

An improved local remeshing algorithm for moving boundary problems

DOI

2016

Effects of cambers on gliding and hovering performance of corrugated dragonfly airfoils

DOI

2015

Automatic surface repairing, defeaturing and meshing algorithms based on an extended B-rep

Advances in Engineering Software

DOI

2015

Fine-Grained Parallel Algorithm for Unstructured Surface Mesh Generation

International Meshing Roundtable Conference

DOI

2014

Automatic Unstructured Element-sizing Specification Algorithm for Surface Mesh Generation

DOI

2012

A numerical simulation of VIV on a flexible circular cylinder

DOI

2012

Structural design and static analysis of a double-ring deployable truss for mesh antennas

DOI

2012

SHOCK INDUCED SEPARATING FLOWS IN SCRAMJET INTAKES

DOI

2012

Development of a Novel Double-Ring Deployable Mesh Antenna

DOI

2012

Improvements in the reliability and element quality of parallel tetrahedral mesh generation

DOI

2011

Unsteady simulation for a high-speed train entering a tunnel

DOI

2011

Three-dimensional constrained boundary recovery with an enhanced Steiner point suppression procedure

DOI

2011

Multi-Mode of Vortex-Induced Vibration of a Flexible Circular Cylinder

DOI

2011

Marching Cubes Based Front Tracking Method and its Application to Some Interface Instability Problems

DOI

2009

Evaluation of the viscous heating induced jam fault of valve spool by fluid–structure coupled simulations

DOI

2009

CAD/CAE integration framework with layered software architecture

2009 11th IEEE International Conference on Computer-Aided Design and Computer Graphics

DOI

2008

An extended advancing front technique for closed surfaces mesh generation

DOI

2008

Detailed Heat Transfer Measurements of Curved Fin Channels

DOI

2007

An Improved Laplacian Smoothing Approach for Surface Meshes

International Conference on Conceptual Structures

DOI

2007

Projecting Tetrahedra with a Simplified Basis Graph

International Multi-Symposium of Computer and Computational Sciences

DOI

2007

Unstructured Mesh Generation and Its Parallelization

DOI

2007

A Scalable Parallel Software Volume Rendering Algorithm for Large-Scale Unstructured Data

International Conference on Conceptual Structures

DOI

2007

A Novel Pointcloud-based Isosurface Extraction

2007 10th IEEE International Conference on Computer-Aided Design and Computer Graphics

DOI

2007

High-quality Texture-based Flow Visualization on Surfaces

2007 10th IEEE International Conference on Computer-Aided Design and Computer Graphics

DOI

2007

Enhanced Unsteady Flow Visualization

International Multi-Symposium of Computer and Computational Sciences

DOI

2007

Intelligent Volume Visualization for Medical Datasets

International Conferences on Biomedical and Bioinformatics Engineering

DOI

2007

Viewpoint Selection Using PSO Algorithms for Volume Rendering

International Multi-Symposium of Computer and Computational Sciences

DOI

2006

Proxy-Based Parallel Visualization in a Grid Environment with PC Clusters

International Multi-Symposium of Computer and Computational Sciences

DOI

2006

The method of fundamental solutions for inverse boundary value problems associated with the steady‐state heat conduction in anisotropic media

DOI

2006

Ontology Construction for Scientific Visualization

International Multi-Symposium of Computer and Computational Sciences

DOI

2006

Efficient rendering of breaking waves using MPS method

DOI

2006

Portal Access to Scientific Computation and Customized Collaborative Visualization on Campus Grid

IEEE Asia-Pacific Services Computing Conference

DOI

2006

Heat Transfer in Reciprocating Planar Curved Tube With Piston Cooling Application

DOI

2006

A General Framework for Parallel Planar Mesh Generation

International Multi-Symposium of Computer and Computational Sciences

DOI

2006

A Virtual Plant Ecosystem Featuring Parallel Computing and Distributed Visualization

International Multi-Symposium of Computer and Computational Sciences

DOI

2006

ParaView-Based Collaborative Visualization for the Grid

APWeb Workshops

DOI

2006

A meshless method for some inverse problems associated with the Helmholtz equation

DOI

2005

Boundary knot method for the Cauchy problem associated with the inhomogeneous Helmholtz equation

DOI

2005

Parallel Computation of Meshfree Methods for Extremely Large Deformation Analysis

DOI

2005

Boundary knot method for some inverse problems associated with the Helmholtz equation

DOI

2005

Parallel Unstructured Quadrilateral Mesh Generation

International Symposium on Image and Signal Processing and Analysis

DOI

2005

A meshfree method and its applications to elasto-plastic problems

Journal of Zhejiang University: Science A

DOI

2005

Scalable Parallel Quadrilateral Mesh Generation Coupled with Mesh Partitioning

International Conference on Parallel and Distributed Computing: Applications and Technologies

DOI

2004

EEMAS: An Enabling Environment for Multidisciplinary Application Simulations

GCC Workshops

DOI

2004

An enabling environment for distributed simulation and visualization

Fifth IEEE/ACM International Workshop on Grid Computing

DOI

2004

MASSIVE: a multidisciplinary applications-oriented simulation and visualization environment

IEEE International Conference onServices Computing, 2004. (SCC 2004). Proceedings. 2004

DOI

2003

Grid Service-Based Parallel Finite Element Analysis

International Conference on Grid and Cooperative Computing

DOI

2003

An Engineering Computation Oriented Visual Grid Framework

International Conference on Grid and Cooperative Computing

DOI

2002

An interactive geometry utility environment for multi‐disciplinary computational engineering

DOI

2000

Visual Steering of Grid Generation in a Parallel Simulation User Environment

DOI

2009

有重叠区域的SAR图像序列拼接新方法

《2009年中国智能自动化会议论文集（第三分册）》