百晓学者学者目录

罗来马

副教授、副研究员、助理研究员、博士生导师、教授、研究员、讲师，合肥工业大学

精选作品

期刊论文

2026

烧结温度对钨纤维/钨复合材料的组织和弯曲力学性能的影响

崔浩然，陈畅，陈寅，吕鹏程，王珊，汪京，罗来马

《中国钨业》

2026

钨粉改性工艺对喂料流变性能及钡钨阴极多孔钨基体孔隙性能的影响

何高勇，陈锦文，昝祥，罗来马，吴玉程

《粉末冶金技术》

DOI

2026

He+辐照对弥散强化Cu-Y2O3铜合金微观结构演化及性能影响

马冰，陈子仡，魏军颖，李季霏，张宏鹏，罗来马，许杰，刘家琴，吴玉程

《金属学报》

2026

高温耐热钨基复合粉体制备与特性的研究进展

吴玉程，朱晓勇，汤俊宇，陈宇，姚刚，罗来马，刘家琴

《中国粉体技术》

2026

预辐照对钨及钨-镍-铁合金中氘滞留与脱附行为的影响

薛海宇，朱特，刘晟，罗来马，张鹏，伍海彪，袁大庆，曹兴忠，程品晶

《核技术》

2026

碳化铪弥散强化钨铼合金的制备及力学性能研究

刘畅，罗来马，陈九雄，李国藩，陈越，王楠，蒋康威

《中国钨业》

2026

Carrier Transport Regulation Empowers Optimization and Enhancement of Thermoelectric Figure of Merit in Sn-Doped Cu₃SbSe₄ Thermoelectric Materials

Jian Sun, Yinghang Lei, Mingliu Xia, Juan Li, Dongsheng Wang, Laima Luo

Materials Today Communications

DOI

2026

Shape retention and properties of diamond/Cu composites prepared by BJ3DP combined with different Cu infiltration contents

Pengfei Gao, Mengmeng Ding, Hao Fu, Jian Sun, Xue Yang, Laima Luo

Additive Manufacturing Frontiers

DOI

2026

Effect of interfaces on the evolution of dislocation loops in W-Y2O3 composites after He irradiation at different temperatures

Jing Wang, Yingying Jia, M. Pan, Shi-Ping Hong, Yi-Fan Zhang, Chang Chen, Laima Luo, Yu-Cheng Wu

Journal of Nuclear Materials

DOI

2026

Effects of different annealing temperatures on the microstructure and radiation resistance of tungsten

Hong-Yu Chen, Jian Ma, Wei Fang, Qiu Xu, Guoqing Wei, Gang Yao, Peng-Qi Chen, Chang Chen, Laima Luo

Journal of Nuclear Materials

DOI

2026

The effect of pre-irradiation on deuterium retention and desorption behavior in tungsten and tungsten alloys

Haiyu Xue, T. Zhu, Sheng Liu, Laima Luo, Peng Zhang, Hai-Biao Wu, Da-Qing Yuan, Xing-Zhong Cao, Pinjing Cheng

Nuclear Techniques

DOI

2026

Edge effect in the oxidation of W-Cr-Zr Alloys from 800 to 1100°C: Mechanisms and a first-order geometrical estimation

Zhao Gao, Xiaoyue Tan, Chenjun Xu, Yuming Chen, Yafei Pan, Wujie Wang, A. Litnovsky, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2026

One-step preparation and performance improvement of the SPTAs/CLAM steel joints used in fusion engineering via SPS powder metallurgy route

Xiaoyue Tan, Chenjun Xu, Yuchen Shen, Weihong Liu, Yuming Chen, Qingbo Tu, Andrey M. Litnovsky, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2026

Quantitative analysis of thermal conductivity reversal in binary alloys by an experimentally constrained first-principles calculation framework

Zhao Gao, Fusheng Tan, Xiaoyue Tan, Yuming Chen, Laima Luo, Yucheng Wu

Computational Materials Science

DOI

2026

The study on microstructure and mechanical properties of 7075 aluminum alloy matrix composites using single-wall carbon nanotubes

Aijun Liu, Xinyu Wang, Ya Pan, Weiqing Yang, Ning Liu, Laima Luo, Minghai Chen

Materials Today Communications

DOI

2026

Effects of combined TaC and CeO2 additions on the microstructure, mechanical properties, and short-term oxidation behavior of WC–10Co cemented carbides

Yongqiang Qin, Keyu Hu, Benliang Chen, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Binder-fine powder interaction-induced interlayer defects in binder jetting: Formation mechanism and mitigation by shell printing

Junyu Tang, Laima Luo, Xiaoyong Zhu, Yucheng Wu, Jiaqin Liu

Materials Characterization

DOI

2026

Effect of sintering temperature on the sintering behavior and porosity of binder jet 3D printed porous tungsten green bodies

Jifei Li, Guanbo Wang, Bing Ma, Yusheng Zhou, Junying Wei, Jiaqin Liu, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Research on the Microstructure and Properties of Laser Welding of Cu/Ti with Ni Interlayer

Fei Liu, Yunyi Xiao, Ping Gao, Kuijing Song, Laima Luo

Metallurgical and Materials Transactions A

DOI

2026

Microstructure and Properties of Al/Cu laser-welded joints based on an AgNi interlayer

Fei Liu, Sheng Liu, 王明庆, Lei Xiao, Laima Luo, Yucheng Wu

Materials Characterization

DOI

2026

Effects of Process Parameters on Microstructure and Mechanical Properties of 6061 Aluminum Alloy in Low-Temperature SPS Diffusion Bonding

Dashuang Liu, Jiaxiong Huang, Chun Li, Ping Wei, Xionghui Li, Xiaonan Wang, Lei Zhang, Laima Luo, Yue Zhao

Journal of Materials Engineering and Performance

DOI

2026

Achieving superior oxidation resistance in W-Cr-Zr alloy via grain refinement and nanoscale ZrO2 dispersion by spark plasma sintering

Yuming Chen, Xiaoyue Tan, Chenjun Xu, Yafei Pan, Shuyuan Liu, Andrey M. Litnovsky, Wujie Wang, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Development of ErB4 particulate reinforced W1Ni matrix composites as promising plasma-facing materials

Burçak Boztemur, Ammar Basil Nader Alkraidi, Yi Xu, Laima Luo, Duygu Ağaoğulları

Ceramics International

DOI

2026

Regulating the residual stresses and mechanical properties of diamond composites by introducing Si3N4 ceramic phases

Tianxu Qiu, Yuanyuan Wang, Fusheng Tan, Changfang Zhao, Laima Luo

Journal of Alloys and Compounds

DOI

2026

Comparative study on microstructure response of Cu-Al2O3 and Cu-Y2O3 alloys under sequential He+/D+ ion irradiation

Y Zhang, Yang An, Shi Hong, Xiaoyuan Sun, Bing Ma, Jing Wang, Chi Xu, Laima Luo, Y N Wu

Nuclear Materials and Energy

DOI

2026

Competition between grain boundary migration and sliding in refractory high-entropy alloy induced by segregation and temperature

Fusheng Tan, Tianxu Qiu, Zheng Fang, Lei Yu, Laima Luo, Yucheng Wu

Intermetallics

DOI

2026

Simultaneous improvement of tensile properties, corrosion and oxidation resistance of Cu-Ta alloy by Ti microalloying

Zhenghao Yao, Mingyang Li, Guodong Sun, Xuansheng Ren, Shoukai Xu, Laima Luo

Materials Research Letters

DOI

2026

The effect of W precursors on in-situ induced Y2O3/W dispersive particles synergistically strengthened copper composites

Bing Ma, Yangyang Zhang, Boyuan Yuan, Yifan Zhang, Laima Luo, Jing Wang, Chang Chen, Xueyang Sheng, Jiaqin Liu, Yucheng Wu

Fusion Engineering and Design

DOI

2026

Synergistic modification of WC-10Co cemented carbide with Y2O3-VC and its friction and wear behavior under multiple environments

Zhenyun Lu, Yongqiang Qin, Xiaoyong ZHU, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Preparation of porous tungsten materials via binder jet 3D printing: Material and process improvement

Junyu Tang, Laima Luo, Xiaoyong ZHU, Xiaojie Wang, Jiaqin Liu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Effect of different oxygen sources on the in-situ oxidation process in the preparation of Cu-Y2O3 composites

Bing Ma, Boyuan Yuan, Hao Ding, Yifan Zhang, Guanghua Zhang, Jing Wang, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2026

Influence of the sintering-current on the microstructure evolutions of W-Cr-Zr alloys during the SPS process

Xiaoyue Tan, Chenjun Xu, Shuyuan Liu, Yuming Chen, Weihong Liu, Andrey M. Litnovsky, Dongye Zhao, Jie Chen, Zelin Shu, Xiaoyong Zhu, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2026

Effect of electroless copper plating modified graphite flakes on thermo-mechanical properties of graphite flake/copper composites

Yongqiang Qin, Yuhang Wang, Hao Liang, Bing Ma, Yifan Zhang, Tian-xu QIU, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2026

Revealing the interfacial strain accommodation mechanism in W–Y₂O₃/Cu HIP joints enabled by laser surface texturing via in-situ TEM observation

Xiaoyu Ding, Chen-Shuo Tu, Yibo Zhang, Li-Sha Fan, Bo Li, Laima Luo, Yucheng Wu, Yao Jian-hua

Materials Characterization

DOI

2026

Investigation of bimodal microstructure design and fracture behavior in ZrO2 dispersion-strengthened tungsten alloys

Wei Ye, Zhen Liu, Ming-Yang Li, Youjun Lu, Laima Luo

Journal of Alloys and Compounds

DOI

2026

Study on the mechanism of strength-ductility enhancement in W alloys via synergistic effects of ZrO2 dispersion strengthening and heterostructure

Wei Ye, Zhen Liu, Tian-xu QIU, Ming-Yang Li, Youjun Lu, Laima Luo, Yu-Cheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2026

Characterization of tensile properties and fracture mechanism of high ductility TZM-Y2O3 composite fabricated by SPS

Yong Wei, Ling-Zi Tao, Hui-Ling Yang, Xiao-Yun Sun, Chengyang Wang, Laima Luo

Journal of Materials Research and Technology

DOI

2026

Liquid film shearing polishing: a new method for irradiation resistance modification of tungsten materials used in fusion reactors

Hong–Yu Chen, Bin-Bin Hong, Bing Hai Lyu, Yunxiao Han, Te Zhu, Xing-Zhong Cao, Qiu Xu, Peng-Qi Chen, Chang Chen, Laima Luo, Y N Wu

Tungsten

DOI

2026

Investigation of microstructure and properties in WTaVCrTi0.1 high-entropy alloy

Xiao-Yu Ding, Lu-Ping Yang, Shan Lin, Laima Luo, Yu-Cheng Wu, Jian-Hua Yao

Materials Today Communications

DOI

2026

Ductility improvement and strengthening-toughening mechanism of TZM alloy with Y2O3 particles

Luoyi Tao, Yong Wei, Hui-Ling Yang, Laima Luo

International Journal of Refractory Metals and Hard Materials

DOI

2026

Effect of La2O3 content on TZM alloy tensile properties and strengthening-toughening mechanisms

Hui-Ling Yang, Yong Wei, Ling-Zi Tao, Laima Luo

Materials Characterization

DOI

2026

Synergistic modulation of rheological and electrical behavior in W–Cu pastes via particle size gradient and ball milling-induced morphology reconstruction

Wang-Zhi Xu, Hai-Sheng Gong, Min-Hui Wang, Di Zhang, Jian Sun, Youjun Lu, Laima Luo

Ceramics International

DOI

2026

Revealing the sintering and strengthening mechanisms of W-Cu composites with minor Fe alloying

Xi-Peng Ding, Di Zhang, Xin-Xiang Wang, Zhu-Pin Huang, Tian-xu QIU, Laima Luo, Wu Yue

Journal of Alloys and Compounds

DOI

2025

铼在钨、钼及镍合金中的多尺度调控机制研究进展

罗来马，李国藩，刘畅，陈九雄，王亚锋，吴玉程

《中国有色金属学报》

2025

偏滤器用钨基材料的热负荷损伤行为研究进展

罗来马，陈宇，姚刚，朱晓勇，朱大焕，吴玉程

《金属学报》

2025

钨材料中缺陷的形成及演化规律

罗来马，魏国庆，刘祯，朱晓勇，吴玉程

《金属学报》

2025

粘结剂与粉末特性对金属注射成形喂料性能影响的研究进展

罗来马，阮方杰，叶伟，黄竹品，昝祥，吴玉程

《粉末冶金技术》

DOI

2025

基于双峰晶粒结构的金属材料强塑性协同优化及应用探讨

罗来马，叶伟，魏国庆，刘祯，马冰，昝祥，吴玉程

《中国有色金属学报》

2025

合金元素Re对W合金力学性能与形变机制影响的研究进展

罗来马，王亚锋，陈九雄，孙飞，吴玉程

《中国有色金属学报》

2025

Shape, microstructure and properties of diamond/copper composites prepared by binder jet additive manufacturing

Mengmeng Ding, Hao Fu, Yun-fei Tian, Jian Sun, Xue Yang, Laima Luo

International Journal of Refractory Metals and Hard Materials

DOI

2025

A novel W-Cu Thick Film Fabricated on High-Temperature Co-fired Ceramic Substrates Using W-CuO Raw Powder Materials

Diyu Zhu, Wang-Zhi Xu, Xiangquan Meng, Hao Fu, Mengmeng Ding, Jian Sun, Xue Yang, Laima Luo

Journal of Electronic Materials

DOI

2025

Liquid film shearing polishing for high quality and low damage tungsten surface: Process optimization, removal mechanism, and processing defects

Binbin Hong, Yiyang Chen, Hong-Yu Chen, T. Zhu, Peng Zhang, Xingzhong Cao, Xiao-Yun Zhao, Laima Luo, Peng-Qi Chen, Haifeng Li, B. Lyu

International Journal of Refractory Metals and Hard Materials

DOI

2025

Pathways to enhancing the irradiation resistance of tungsten-based material: Advantages and mechanisms of swaged tungsten

Guoqing Wei, Yi-Peng Li, Yifan Ding, Xue-Peng Liu, Wei Ye, Zhen Liu, Hongyu Chen, Laima Luo

Materials letters (General ed.)

DOI

2025

Influence of the Injection Process on Two-Phase Separation in Stainless-Steel Metal Powder Injection Molding

Yan Li, Xingjie Peng, Xiang Zan, Laima Luo, Yucheng Wu

Metals

DOI

2025

Effect of Ti3AlC2 addition on the microstructure and mechanical properties of copper-graphite composites

Yongqiang Qin, Xuan Huang, Bing Ma, Yifan Zhang, Tian-xu Qiu, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2025

Bimodal grain structure design and property optimisation of tungsten‑titanium alloys

Ye Wei, Tian-Xu Qiu, Guo-Qing Wei, Zhen Liu, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2025

Effects of heat treatment on the microstructure and mechanical properties of CLF-1 steel for fusion blankets

Xu Shen, Gang Yao, Zhi-Hong Liu, Wei Wen, Songlin Liu, Xiaoyong Zhu, Jia-Qin Liu, Laima Luo, Yucheng Wu

Journal of Materials Research and Technology

DOI

2025

High-throughput explorations of mechanical and diffusion properties of CoNi-based alloys by using diffusion multiples

Tianxu Qiu, Ruochong Wang, Jing Zhong, Lijun Zhang, Laima Luo, Yong Liu

Materials Science and Engineering A

DOI

2025

Research on optimization of electroless copper plating process and coating properties on the surface of microwave dielectric ceramics

Dong–Guang Liu, Xin-Peng Yang, Sha-Sha Chang, Sheng-Jen Cheng, Hui Liu, Chenhao Wu, Chong Ma, Zequn Li, Chunfu Hong, Laima Luo

Ceramics International

DOI

2025

Deuterium plasma-driven permeation and retention in 9-12Cr ODS steels

Hongyan Tan, Yue Xu, Yan He, Xiaoping Tian, Haiying Fu, Laima Luo

Fusion Engineering and Design

DOI

2025

Size Effect and the Mechanical Property Anisotropy of Commercial Purity Nickel Foils

S. Wang, Lili Zhao, Q. Q. Shi, C. Chen, J. Wang, H. Gong, Laima Luo

Journal of Materials Engineering and Performance

DOI

2025

Dynamic evolution of vacancy based on Object Kinetic Monte Carlo and its influence on hydrogen isotope retention behavior

Fei Sun, Xiangming Lin, Xingyu Fang, Jie Shan Hou, Jipeng Zhu, Laima Luo, Yasuhisa Oya, Yucheng Wu

Journal of Nuclear Materials

DOI

2025

Effect of irradiation temperature on the microstructure and hardness of W-0.3Cr alloy after irradiation with 6.4 MeV Fe ions

Jing Wang, Jingxian Sun, Yingying Jia, Yifan Zhang, Yuji Hatano, Diancheng Geng, Katsuya Suzuki, Chang Chen, Laima Luo, Kiyohiro Yabuuchi, Ryuta Kasada

Materials & Design

DOI

2025

Enhancing the microstructure and mechanical properties of ultrafine-grained WC-10FeNiCo cemented carbide by optimizing CeO2 addition content

Yongqiang Qin, Lunke He, Bing Ma, Tian-xu Qiu, Laima Luo, Yu-Cheng Wu

Journal of Alloys and Compounds

DOI

2025

Influence of TiB2 and Ni addition on microstructure and mechanical properties of WC–10Co ultra–coarse grain cemented carbides

Xuming Wang, Yongqiang Qin, Xiaoyong Zhu, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2025

Effect of heat treatment at different stages of mechanical alloying on the Cu–Y2O3 composites synthesized using Y2(CO3)3 precursor

Junying Wei, Bing Ma, Laima Luo, Yifan Zhang, Jing Wang, Jie Xu, Jiaqin Liu, Yucheng Wu

Journal of Materials Research and Technology

DOI

2025

Microstructure and mechanical properties of Al2O3 dispersion strengthened Cu by laser in-situ aluminum thermal reduction processing

Xiaoyu Ding, Yunlong Fu, Bo Li, Shan Lin, Laima Luo, Yucheng Wu, Jian-Hua Yao

Materials & Design

DOI

2025

Joining and characterization of SPTAs/V/CLAM steel joints using SPDB technique with different current directions

Xiao–Yue Tan, Chengjun Xu, Weihong Liu, Yuming Chen, Qingbo Tu, Andrey M. Litnovsky, Laima Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2025

Optimization of binder Jet 3D Printing Parameters for Porous Tungsten: Sintering and Pore Morphology Analysis

Sha-Sha Chang, Dong–Guang Liu, Sheng-Jen Cheng, Siwei Zhou, Chenhao Wu, Chong Ma, Xuxin Yang, Chunfu Hong, Laima Luo

International Journal of Refractory Metals and Hard Materials

DOI

2025

Investigation of thermoplastic deformation behavior and microstructural evolution of CLF-1 steel for fusion blankets

Xu Shen, Gang Yao, Xiaoyong Zhu, Jia-Qin Liu, Laima Luo, Yu-Cheng Wu

Nuclear Materials and Energy

DOI

2025

Fabrication of high ductility TZM-La2O3 alloy and characterization of microstructure and mechanical properties

Yong Gang Wei, Hui-Ling Yang, Ling-Zi Tao, Xiao-Yun Sun, Chengyang Wang, Laima Luo

International Journal of Refractory Metals and Hard Materials

DOI

2025

Mechanism analysis of microstructural evolution induced by Y2O3 particles during the rolling process of W-Y2O3 composite

Laima Luo, Yu Chen, Xiaoyong Zhu, Gang Yao, Dahuan Zhu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2025

Preparation of porous tungsten materials for dispenser cathodes–A brief review

Junyu Tang, Jiaqin Liu, Xiaojie Wang, Laima Luo, Yucheng Wu

Journal of Materials Research and Technology

DOI

2025

Influence of pressure on densification process of W-Cr-Y-Zr alloy consolidated at 1200 °C using spark plasma sintering

Xiao–Yue Tan, Shuyuan Liu, Chenjun Xu, Yuming Chen, Andrey M. Litnovsky, Jie Chen, Huijuan Zhu, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2025

The synergistic effect of deuterium and helium on the microstructure evolution of W–Y2O3 material during plasma exposure

Meiye Pan, Lipeng Sun, Yifan Zhang, Jing Wang, Laima Luo, Yucheng Wu

Nuclear Fusion

DOI

2025

Trapping and de-trapping behavior of hydrogen isotopes in <100> interstitial dislocation loops of tungsten

Fei Sun, Qihang Liu, Bai-Chuan Xu, Xiao-Chun Li, Jipeng Zhu, Dahuan Zhu, Hai-Shan Zhou, Hongxiang Zong, Laima Luo, Yasuhisa Oya, Yucheng Wu

Nuclear Fusion

DOI

2025

The effect of reduction heat treatment after mechanical alloying on the microstructure and properties of Cu-Y2O3/W composites

Yusheng Zhou, Wenjie Ding, Junying Wei, Laima Luo, Bing Ma, Yifan Zhang, Jing Wang, Jiaqin Liu, Wanxiu Hai, Yucheng Wu

Journal of Alloys and Compounds

DOI

2025

Microstructure and mechanical properties enhancement of WC-10Co cemented carbide with Y2O3 and VC composite additives

Zhenyun Lu, Yongqiang Qin, Xiaoyong Zhu, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2025

Surface damage evolution during helium plasma irradiation of W-Y2O3 composite materials in different grain orientations

Zhen Liu, Guo-Qing Wei, Ye Wei, Gang Yao, Yi-Fan Zhang, Laima Luo, Yu-Cheng Wu

Journal of Nuclear Materials

DOI

2025

Preparation of W–Cu composite with Cu-network structure via W-coated Cu powder structure optimization

Gang Yao, Xu Shen, Cai-Yan Wang, Xi-Peng Ding, Laima Luo, Jia-Qin Liu, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2025

The effect of W/Cu phase boundary on the evolution of end-of-range dislocation loop induced by He ion irradiation at 773 K

Huaqing Sang, An Yang, Yifan Zhang, Jing Wang, Qian Zhan, Laima Luo, Yucheng Wu

Materials Characterization

DOI

2025

Deformation behaviors and microstructure evolution of sintered W-10Re alloy under different conditions

Ya-Feng Wang, Guo-Fan Li, Jiu-Xiong Chen, Laima Luo, Yongqiang Qin, Fei Sun, Di Dong, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2025

Effect of annealing twinning on the microstructure and microtexture of pure nickel

Q.Q. Shi, S. Wang, J. Qiao, Jing Wang, C. Chen, Laima Luo

Materials Characterization

DOI

2025

Effect of the transmutation element rhenium on the retention, desorption, and diffusion behaviors of hydrogen isotopes in tungsten

Baolong Fan, Fei Sun, Qihang Liu, Xiao-Chun Li, Jipeng Zhu, Kang-Yan Lu, Huilong Yang, Hai-Shan Zhou, Rui Ding, Laima Luo, Yasuhisa Oya, Yucheng Wu

Journal of Nuclear Materials

DOI

2025

A vacancy dynamic evolution model based on rate theory and its influence on hydrogen isotope retention behavior

Fei Sun, Xiangming Lin, Yijin Huang, Jipeng Zhu, Long Cheng, Yifan Zhang, Hai-Shan Zhou, Laima Luo, Yasuhisa Oya, Yucheng Wu

Journal of Nuclear Materials

DOI

2025

Influence of rhenium addition on deuterium plasma-driven permeation and retention in tungsten coatings

Xiaoping Tian, Yue Xu, Hongyan Tan, Yan He, Haiying Fu, Laima Luo

Fusion Engineering and Design

DOI

2025

Effects of helium irradiation damage on deuterium plasma-driven permeation through tungsten coated RAFM steel

Yue Xu, Xiaoping Tian, Hongyan Tan, Haiying Fu, Junjie Ni, Laima Luo, Yucheng Wu

Nuclear Fusion

DOI

2025

Bulk fabrication of tungsten-based composite materials with excellent low-temperature strength and ductility through powder innovation

Guoqing Wei, Zhen Liu, Ye Wei, Yifan Zhang, Xuan Meng, Laima Luo, Yucheng Wu

Materials Science and Engineering A

DOI

2025

A model to evaluate the ductile-to-brittle transition of bcc-W based on small tensile test and dislocation characterization

Xingzhan Yuan, Hong Shi, Jing Wang, Bing Ma, Yifan Zhang, Man Niu, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2025

Development of Tungsten Composites as Plasma-Facing Materials by Doping Rare-Earth Boride Particulates

Burçak Boztemur, Yue Xu, Laima Luo, Mustafa Lütfi Öveçoğlu, Duygu Ağaoğulları

˜The œminerals, metals & materials series

DOI

2024

钨纤维增韧钨基复合材料的研究进展

陈畅，李宽路，陈寅，王珊，汪京，罗来马

《机械工程材料》

2024

SPS制备SPTAs块体过程的有限元模拟及其微观组织分析

吕旷，谭晓月，涂清波，丁杰，马英群，罗来马，吴玉程

《粉末冶金材料科学与工程》

2024

时效处理对Cu-Y2O3-Ti复合材料组织及性能的影响

秦永强，韦国宣，罗来马，庄翌，马冰，张一帆，吴玉程

《材料热处理学报》

2024

HfO2掺杂对湿化学法制备W-20Cu复合材料微观组织和性能的影响

许皖南，王彩艳，丁希鹏，罗来马，吴玉程

《中国有色金属学报》

2024

Hf含量对湿化学法制备超细W-Y2O3复合材料显微组织与性能的影响

刘祯，颜硕，罗来马，昝祥，吴玉程

《中国有色金属学报》

2024

Effect of post-sinter annealing on structure and coercivity of (Zr, Ti)-doped Nd-Ce-Fe-B magnets

Zhiwei Wang, Jun-Jie Ni, Bo Song, Xuegeng Wang, Xiaolian Liu, Kai Xu, Shutai Zhou, Chengchao Hu, Yue Xu, Laima Luo

Journal of Alloys and Compounds

DOI

2024

Relations of magnetic and electrochemical anti-corrosion properties of (Zr, Ti)-doped NdCeFeB magnets with Ti content

Yuxuan Shao, Jun-Jie Ni, Zhiwei Wang, Xuegeng Wang, Kai Xu, Bo Song, Yue Xu, Shutai Zhou, Tao Liu, Laima Luo

Journal of Materials Research and Technology

DOI

2024

Heterogeneous electrocatalyst of nanoscale Fe-based medium-entropy alloy and sulfide for oxygen evolution reaction.

Yuxuan Shao, Jun-Jie Ni, Jie Yin, Xinqing Liu, Yulai Song, Yue Xu, Shuai Guo, Laima Luo

Journal of Colloid and Interface Science

DOI

2024

Fe-Rich Medium-Entropy Core-Shell Electrocatalyst for Hydrogen Evolution Reaction Under Large Current Density.

Yuxuan Shao, Jun-Jie Ni, Jie Yin, Xinqing Liu, Shuai Guo, Yue Xu, Bo Song, Yulai Song, Xin-Xin Li, Laima Luo, Cheng-Hua Sun

Small

DOI

2024

Exploration of pretreatment process and wettability of high bonding Ni-P coatings on W-Cu composites for electronic packaging

Jinxin Zou, Chong Ma, Hui Liu, Shasha Chang, Chunfu Hong, D.G. Liu, Laima Luo

Applied Surface Science

DOI

2024

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

Xiaoyu Ding, Di Ma, Yun-Fei Fu, Laima Luo, Yucheng Wu, Jianhua Yao

Metals

DOI

2024

NbMoVTa refractory high-entropy alloy incorporated WNi matrix composite as a future plasma-facing material: Evaluation of mechanical properties and helium ion irradiation behavior

Burçak Boztemur, Kaan Filiz, Zahide Karagüney, Eyüpcan Gökaydın, Yasin Bozkurt, Ceren Özbasmacı, Kübra Gürcan Bayrak, Yue Xu, Laima Luo, Duygu Ağaoğulları, Mustafa Lütfi Öveçoğlu

Intermetallics

DOI

2024

Evolution of microstructure and mechanical properties of warm-rolled W 10Re alloy during annealing at 1500 °C

Ya-Feng Wang, Jiu-Xiong Chen, Laima Luo, Yongqiang Qin, F. J. Sun, Di Dong, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2024

Research progress and development of strengthening-toughening methods for molybdenum alloys prepared by powder metallurgy

Yong Wei, Hui-Ling Yang, Ling-Zi Tao, Kaixuan Gui, Laima Luo

Journal of Alloys and Compounds

DOI

2024

Strengthening mechanisms and research progress in the W/Cu interfaces

Laima Luo, Xi-Peng Ding, Wang-Zhi Xu, Cai-Yan Wang, Yongqiang Qin, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2024

Effects of Carbon Deposition on Deuterium Plasma-Driven Permeation Through Tungsten-Coated RAFM Steel

Yue Xu, Xiaoping Tian, Hongyan Tan, Haiying Fu, Zheng Gong, Junjie Ni, Laima Luo

Fusion Science & Technology

DOI

2024

Optimisation of properties of Ti3SiC2 reinforced copper matrix composites

Yongqiang Qin, Guo-Xuan Wei, Bing Ma, Yifan Zhang, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2024

High strength and tackling structural relaxation by sub-grains synergistic deformation in W-Re alloy

Ya-Feng Wang, Zhi Hong Chen, Jiu-Xiong Chen, Laima Luo, Sun Fei, Yucheng Wu

Materials Science and Engineering A

DOI

2024

Annealing characteristics and mechanism interpretation of high-performance swaged W-Y2O3 alloy

Guoqing Wei, Shihao Li, Yudie Chen, Yifan Zhang, Xuan Meng, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2024

A novel plasma-facing NdB6 particulate reinforced W1Ni matrix composite: Powder metallurgical fabrication, microstructural and mechanical characterization

Burçak Boztemur, Ammar Basil Nader Alkraidi, Yue Xu, Laima Luo, Mustafa Lütfi Öveçoğlu, Duygu Ağaoğulları

International Journal of Refractory Metals and Hard Materials

DOI

2024

Effects of Y2Zr2O7 particles and rolling deformation process on the mechanical properties and heat load behavior of W–Y2Zr2O7 plate

Gang Yao, Shen Xu, Jia-Qin Liu, Hong-Yu Chen, Laima Luo, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2024

Damage caused by He and D plasma exposure in Mo/Zr-added W-Y 2 O 3 composites

Xiaona Ren, Gang Yao, Laima Luo, Y. Xu, Atsushi Yabuuchi, Qiu Yu Xu

Radiation effects and defects in solids

DOI

2024

Formation mechanism of W-coated Cu composite powders and the metal injection molding using polyoxymethylene-based binders

Xi-Peng Ding, Cai-Yan Wang, Fang-Jie Ruan, Zhu-Pin Huang, Wan-Nan Xu, Laima Luo, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2024

Microstructure and properties of tungsten‐40 wt.–% copper composites fabricated by binder jet 3D printing

Yanmei Tian, Jian Sun, Zhiqiang Xu, Xiuqing Meng, Z. Chen, Junrong Tang, P. Tao, Laima Luo, Yang Wu

Materialwissenschaft und Werkstofftechnik

DOI

2024

Study and theoretical explanation on high-temperature strength of ODS-W alloy

Guoqing Wei, Qi Zhang, Xuepeng Liu, Yifan Zhang, Xuan Meng, Haixin Li, Zhipeng Li, Laima Luo, Yucheng Wu

Materials Characterization

DOI

2024

Competitive barrier and trapping effects of helium bubbles on hydrogen isotopes migration behavior in tungsten

Fei Sun, D.Y. Chen, Q.H. Liu, Jinhua Zhu, Xiao-Chun Li, H. Zhou, Yasuhisa Oya, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2024

Microstructure and failure mechanism of Y2O3 coating on the W fiber in Wf/W composites during field assisted sintering

C. Chen, Yue Chen, X. Han, K.L. Li, Song Wang, Yunfeng Zhang, Y. Mao, J.W. Coenen, Jincheng Wang, Laima Luo

Journal of Materials Research and Technology

DOI

2024

In-situ observation of restoration of tungsten plate via high-temperature confocal laser scanning microscopy

Kang Wang, Jiaqin Liu, Xiang Zan, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2024

Multiphase strengthening mechanism of Cu-Y2O3/W composites prepared by mechanical alloying

Xueyang Sheng, Bing Ma, Laima Luo, Jie Xu, Yoshimitsu Hishinuma, Yuji Wu, Jiaqin Liu, Yucheng Wu

Nuclear Materials and Energy

DOI

2024

Study on damage behavior of the outer horizontal target in the EAST lower divertor after plasma operations

Gang Yao, Xu Shen, Jiaqin Liu, Xiao–Yong Zhu, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2024

Microstructure evolution of the rolled tungsten during the current-assisted annealing treatment

Yiwei Liu, Xiao–Yue Tan, Yuming Chen, Xiaoyong Zhu, Wujie Wang, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2024

Potential plasma facing materials: A case study on CeB6 particulate reinforced W–1Ni matrix composites produced via different sintering techniques

Burçak Boztemur, Ammar Basil Nader Alkraidi, Mertcan Kaba, Yue Xu, Laima Luo, Hüseyin Çi̇menoǧlu, Mustafa Lütfi Öveçoğlu, Duygu Ağaoğulları

Journal of Science Advanced Materials and Devices

DOI

2024

Mechanism of hydrogen isotope exchange for tritium removal in plasma-facing materials: a multi-scale investigation

Fei Sun, C. Hao, D.Y. Chen, Hai-Shan Zhou, Yasuhisa Oya, Jipeng Zhu, Jun Tang, Hongxiang Zong, Laima Luo, Yucheng Wu

Nuclear Fusion

DOI

2024

Study on the effect of vacuum fusion infiltration technology on the properties of tungsten/copper joining interface

Haojie Zhang, Xue-qin Tian, Xiaoyu Ding, Hui-Yun Zheng, Laima Luo, Yucheng Wu, Jianhua Yao

Nuclear Engineering and Technology

DOI

2024

Failure analysis of damaged tungsten monoblock components of upper divertor outer target in EAST fusion device

Kang Wang, Ya Xi, Xiang Zan, Dahuan Zhu, Laima Luo, Rui Ding, Yucheng Wu

Nuclear Engineering and Technology

DOI

2024

A model to evaluate the radiation-hardening in shallow ion-irradiated metallic materials

Yifan Zhang, Jing Wang, Bing Ma, Qian Zhan, Laima Luo, Yucheng Wu

Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms

DOI

2024

Effect of process control agent on the synthesis of Cu-Y2O3 by mechanical alloying

Bing Ma, Hao Ding, Feng Jiang, Yoshimitsu Hishinuma, Laima Luo, Yifan Zhang, Jing Wang, Xueyang Sheng, Hiroyuki Noto, Jiaqin Liu, Jingyi Shi, Takeo Muroga, Yucheng Wu

Nuclear Materials and Energy

DOI

2024

Enhanced thermal-mechanical properties of rolled tungsten bulk material reinforced by in situ nanosized Y–Zr–O particles

Gang Yao, Hongyu Chen, Laima Luo, Xiang Zan, Yucheng Wu

Nuclear Engineering and Technology

DOI

2024

Study on Microstructure and High Temperature Stability of WTaVTiZrx Refractory High Entropy Alloy Prepared by Laser Cladding

Xiaoyu Ding, Weigui Wang, Haojie Zhang, Xueqin Tian, Laima Luo, Yucheng Wu, Jianhua Yao

Entropy

DOI

2024

Restoration kinetics and microstructural evolution of moderately warm-rolled yttria dispersion-strengthened tungsten plate during annealing at high temperatures

Kang Wang, Ya Xi, Xiang Zan, Laima Luo, Jiaqin Liu, Yucheng Wu

Journal of Nuclear Materials

DOI

2024

Effect of Y precursors on the synthesis of Cu-Y2O3 by mechanical alloying and spark plasma sintering

Jie Xu, Bing Ma, Laima Luo, Feng Jiang, Yifan Zhang, Jing Wang, Jiaqin Liu, Yucheng Wu

Journal of Nuclear Materials

DOI

2023

弥散强化铜中碳纳米管和氧化钇的协同强化机制

秦永强，司永健，罗来马，马冰，张一帆，吴玉程

《材料热处理学报》

2023

合金元素Zr对Cu-Y2O3复合材料组织和性能的影响（英文）

秦永强，庄翌，罗来马，张一帆，吴玉程

Transactions of Nonferrous Metals Society of China

2023

退火对熔渗法制备W/Y2O3-Cu复合材料组织和性能的影响

陈玉柏，傅义毅，李世豪，罗来马

《中国钨业》

2023

掺杂Y2O3钨基复合材料在近韧脆转变温区的静载拉伸特性

黄俊，李阳阳，袁国虎，左彤，罗来马，徐光青，吕珺，谭晓月，洪雨，朱晓勇，吴玉程

《机械工程材料》

2023

湿化学法W-Re合金制备与性能

黄胜猛，徐旺之，罗来马，吴玉程

《中国有色金属学报》

2023

低能高通量氦离子辐照下W28Ta28V28Zr8Sc8高熵合金损伤行为研究

王亚锋，陈志鸿，徐云凤，罗来马，昝祥，朱晓勇，吴玉程

《稀有金属材料与工程》

2023

原位反应制备Cu-Y2O3弥散强化铜中机械合金化进程

马冰，王宏博，菱沼良光，黄波，秦永强，罗来马，吴玉程

《金属功能材料》

2023

面向等离子体材料用先进钨复合材料的改性研究进展与趋势

罗来马，颜硕，刘祯，昝祥，吴玉程

《粉末冶金技术》

2023

合金元素对掺杂钨基材料力学、抗辐照性能影响研究进展

罗来马，叶伟，陈宇蝶，吴玉程

《中国钨业》

2023

孔隙率和晶粒度对纯钨导热性能的影响

潘鹏程，陈昱溟，刘楠，罗来马，吴玉程

《中国钨业》

2023

钨与异种材料连接的研究进展

刘大双，吴玉程，许建华，李雄辉，罗来马，武昭妤，钟素娟

《电焊机》

2023

Research Progress of WC-Co Cemented Carbide Forming Process

Luo Laima, TANG Jun-yu, WU Yu-cheng

Journal of Mechanical Engineering

DOI

2023

Microstructure Evolution and Effect on Deuterium Retention in TiC- and ZrC-Doped Tungsten under He+ Ion Irradiation

Xiaoyu Ding, Jiahui Fang, Qiu Yu Xu, Panpan Zhang, Haojie Zhang, Laima Luo, Yucheng Wu, Jianhua Yao

Metals

DOI

2023

Investigation of the Y Effect on the Microstructure Response and Radiation Hardening of PM V-4Cr-4Ti Alloys after Irradiation with D Ions

Yifan Zhang, Xiaoyuan Sun, Bing Ma, Jing Wang, Laima Luo, Yucheng Wu

Metals

DOI

2023

Study on elemental composition and interfacial structure of the second phase in WC-8Co hard alloy doped with rare earth components

Yu Yang, Zhenyun Lu, Xiang Zan, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2023

Change of interfacial structure between the matrix and second phase of Y–Zr-modified WC-8Co cemented carbide

Yu Yang, Zhenyun Lu, Xiang Zan, Laima Luo, Yucheng Wu

Ceramics International

DOI

2023

Microstructure of tungsten coatings effect on deuterium plasma-driven permeation through RAFM steel

Kai Yang, Yue Xu, Xiaoping Tian, Laima Luo, Junjie Ni, Yucheng Wu

Nuclear Materials and Energy

DOI

2023

Microstructure, mechanical properties and hermeticity of W-Cu/HTCC brazed joints with surface metallization

Dong–Guang Liu, Jinxin Zou, Hui Liu, Zequn Li, Sha-Sha Chang, Liang Zheng, Laima Luo, Chunfu Hong

International Journal of Refractory Metals and Hard Materials

DOI

2023

Ultrafine/nano WC-Co cemented carbide: Overview of preparation and key technologies

Yucheng Wu, Zhenyun Lu, Yongqiang Qin, Zhiyong Bao, Laima Luo

Journal of Materials Research and Technology

DOI

2023

Effect of alloying element Zr on microstructure and properties of Cu−Y2O3 composites

Yongqiang Qin, Yi Zhuang, Laima Luo, Yifan Zhang, Yucheng Wu

Transactions of Nonferrous Metals Society of China

DOI

2023

Influence of laser texturing on interfacial bonding strength of W/Cu joint by spark plasma sintering

Haojie Zhang, Xue-qin Tian, Xiaoyu Ding, Hui-Yun Zheng, Laima Luo, Yucheng Wu, Jianhua Yao

Fusion Engineering and Design

DOI

2023

Enhancement of in-situ NbC oxidation with size reduction and its effect on electrochemical corrosion resistance of Cu-matrix composites

Zhiwei Wang, Junjie Ni, Yu Yang Bian, Xiaoqiang Li, Yuxuan Shao, Yulai Song, Xuehui Hao, Yue Xu, Jian Ye, Laima Luo

Ceramics International

DOI

2023

A comparative study on the microstructure and performance stability of Cu-Al2O3 and Cu-Y2O3 alloys after high-temperature annealing

Xiaoyuan Sun, Yifan Zhang, Bing Ma, Jing Wang, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2023

Recent progress in research on bonding technologies of W/Cu monoblocks as the divertor for nuclear fusion reactors

Dang Xu, Jigui Cheng, Pengqi Chen, Kaichao Fu, Bangzheng Wei, Ruizhi Chen, Laima Luo, Qiu Yu Xu

Nuclear Materials and Energy

DOI

2023

Effect of anisotropic mechanism of W-2%wt Y2O3 alloy on DBTT and fracture analysis under small punch testing

Jun Hua Huang, Guohu Yuan, Tong Zuo, Wei Song, Xiao–Yue Tan, Laima Luo, XiaoYong Zhu, Jiaqin Liu, JunLing Chen, Yucheng Wu

Materials Science and Engineering A

DOI

2023

Estimation of different calculation models for evaluating heavy ion-induced damage in plasma facing materials

Fei Sun, D.Y. Chen, C. Hao, Yasuhisa Oya, J.P. Zhu, Denghang Li, Laima Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2023

Shape retention of W-30Cu composites prepared by 20 wt% Cu melt infiltration into W-10Cu green parts made via BJ3DP

Yunfei Tian, Jian Fei Sun, Zhenqi Xu, Xiangquan Meng, Zhuo Chen, Junyu Tang, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2023

MoB2/MoB ceramic particulate reinforced W-1 wt % Ni matrix composites as potential plasma facing materials

Burçak Boztemur, Yiğit Cem Gültekin, Seyfullah Ceylan, Emre Görgün, Okan Hasan Memiş, Yue Xu, Laima Luo, Mustafa Lütfi Öveçoğlu, Duygu Ağaoğulları

Ceramics International

DOI

2023

Effects of composite oxide addition on the microstructure and properties of ODS copper

Yongqiang Qin, Chen–Yu Deng, Bing Ma, Yifan Zhang, Laima Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2023

Investigation on microstructure and mechanical properties in explosive welded Mo–Cu/Cu interface

Yong Wei, Xianjun Wu, Ze-Rui Xie, Ming Chen, Tong Liu, Gang Wang, Xiao-Yun Sun, Tianan Rui, Jinhua Peng, Laima Luo, Yucheng Wu

Journal of Materials Research and Technology

DOI

2023

Microstructure and properties of W Cu composites with low copper content at different sintering temperatures

Xi-Peng Ding, Wan-Nan Xu, Laima Luo, Yongqiang Qin, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2023

The anomalous annealing hardening behaviors in commercial pure Tantalum foil

S. Wang, M. Kang, X. Han, C. Chen, Z. Zhang, Zhi Hong Zhong, Laima Luo

Materials Science and Engineering A

DOI

2023

The optimization of Cu6Y sourced ODS-Cu: Effect of Y2O3 content

Bing Ma, Laima Luo, Yoshimitsu Hishinuma, Jing Wang, Yifan Zhang, Hiroyuki Noto, Yucheng Wu, Takeo Muroga

Nuclear Materials and Energy

DOI

2023

Study on Effect of High-Entropy Alloy Binder on Microstructure and Properties of WC Cemented Carbide Doped with Rare Earth Oxide

Yongqiang Qin, Jian Yuan, Yi Zhuang, Bing Ma, Laima Luo, Yucheng Wu

Coatings

DOI

2023

Characterization of the Crack and Recrystallization of W/Cu Monoblocks of the Upper Divertor in EAST

Ya Xi, Gaoyong He, Xiang Zan, Kang Wang, Dahuan Zhu, Laima Luo, Rui Ding, Yucheng Wu

Applied Sciences

DOI

2022

时效温度对CuCrZr-WC复合材料显微组织及性能影响

秦永强，庄翌，罗来马，宋晓戈，韩旭，崔接武，吴玉程

《材料热处理学报》

2022

熔渗法制备W/Y2O3-Cu复合材料的组织及性能

傅义毅，罗来马，吴玉程

《金属功能材料》

2022

轧制加工对聚变装置用颗粒增强钨合金性能影响的研究进展

罗来马，赵志豪，姚刚，昝祥，朱晓勇，程继贵，吴玉程

《中国有色金属学报》

2022

W-Re合金的制备与应用

罗来马，徐旺之

《中国钨业》

2022

离心喷雾干燥制备W-10Re合金粉末及其烧结行为研究

王亚锋，陈志鸿，徐旺之，王越，罗来马，昝祥，吴玉程

《中国钨业》

2022

Corrosion and microstructure evolution of He+ plasma irradiated tungsten PFMs

Jun Guo Huang, Yangyang Li, Guohu Yuan, Qing Liu, Tong Zuo, Guangqing Xu, Jun Lv, Xiaoyu Ding, Yu Hong, Laima Luo, Xiao–Yue Tan, JunLing Chen, Yuchen Wu

Fusion Engineering and Design

DOI

2022

Effect of different Y components on optimization of dispersive Y2O3 particles in ODS-Cu

Bing Ma, Yoshimitsu Hishinuma, Hiroyuki Noto, Yifan Zhang, Jing Wang, Laima Luo, Takeo Muroga

Journal of Nuclear Materials

DOI

2022

Simultaneous improvement of microstructure and high-temperature tensile properties in CNT-doped Mo-based composites

Yong Wei, Xian-Ke Lu, Gang Wang, Yu Feng Zhao, Jiansheng Li, Xiao-Yun Sun, Laima Luo, Yucheng Wu

Vacuum

DOI

2022

Manufacturing of magnetron sputtering tungsten coatings and irradiation damage behavior under helium plasma exposure

Yunfeng Xu, Yue Xu, Laima Luo, Xiang Zan, Yucheng Wu

Vacuum

DOI

2022

Investigation of microstructure and strengthening mechanism in CNTs reinforced Mo-based composites

Yong Wei, Gang Wang, Yu Feng Zhao, Jiansheng Li, Xiao-Yun Sun, Laima Luo, Yucheng Wu

Journal of Materials Research and Technology

DOI

2022

Microstructure and properties of silver-added W-Cu prepared by infiltration sintering

Dong–Guang Liu, Lin Meng, Jinxin Zou, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2022

Interfacial microstructure and thermal shock resistance of diffusion bonding ODS-W and molybdenum alloy by spark plasma sintering

Dong–Guang Liu, Lin Meng, Chong-Fei Ruan, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2022

Shape retention of cemented carbide prepared by Co melt infiltration into un-sintered WC green parts made via BJ3DP

Junyu Tang, Laima Luo, Zhen Liu, Xiang Zan, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2022

Electrochemical corrosion behavior of hot-deformed NdFeB magnet with different content of nano-TiC

Xiaoqiang Li, Junjie Ni, Zhiwei Wang, Jian Li, Yue Xu, Shutai Zhou, Kai Xu, Xuehui Hao, Chengchao Hu, Xuedong Na, Laima Luo

Journal of Alloys and Compounds

DOI

2022

Enhanced mechanical and electrical properties of CuCrZr-WC alloy prepared by mechanical alloying and spark plasma sintering

Yongqiang Qin, Yi Zhuang, Yue Wang, Yifan Zhang, Laima Luo, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2022

Preparation and properties of Al2O3/SiO2 composite tritium permeation barrier and its effects on the inner walls of pipelines

Yu–Lan Liu, Tingting Yang, Liu Zhu, Laima Luo, Dong–Guang Liu, Yucheng Wu

Fusion Engineering and Design

DOI

2022

A prospect of using ternary W-5 wt%V-5 wt%Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material

Hongjing Cui, Ning Liu, Laima Luo, Yue Xu, Jigui Cheng, Yucheng Wu

Journal of Alloys and Compounds

DOI

2022

Diffusion bonding and interface structure of advanced carbide-dispersion-strengthened Cu and oxide-dispersion-strengthened W

Lu Han, Jing Wang, Yuanyuan Chen, Zhang Liu, Yuan Huang, Dongguang Liu, Laima Luo, Chenxi Liu, Yongchang Liu, Zumin Wang

Journal of Materials Processing Technology

DOI

2022

Irradiation damage of reduced activation ferritic/martensitic steel CLAM exposed to low-energy high-flux D + He mixture plasma

Yue Xu, Yue Xu, Yunfeng Xu, Yunfeng Xu, Kai Yang, Laima Luo, Shuyu Dai, Haiying Fu, Yucheng Wu

Fusion Engineering and Design

DOI

2022

Effects of Zr/Mo addition on He bubble formation in Y2O3-added W alloys

Qiu Yu Xu, M. Miyamoto, Laima Luo

Tungsten

DOI

2022

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

Gang Yao, Hong–Yu Chen, Zhihao Zhao, Laima Luo, Yong Ma, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2022

Effect of Pressure on Densification and Microstructure of W-Cr-Y-Zr Alloy during SPS Consolidated at 1000 °C

Huijuan Zhu, Xiao–Yue Tan, Qingbo Tu, Y. Mao, Zelin Shu, Jie Chen, Laima Luo, Andrey M. Litnovsky, J.W. Coenen, Ch. Linsmeier, Yucheng Wu

Metals

DOI

2022

Surface Damage and Microstructure Evolution of Yttria Particle-Reinforced Tungsten Plate during Transient Laser Thermal Shock

Daya Ren, Ya Xi, Jie Rong Yan, Xiang Zan, Laima Luo, Yucheng Wu

Metals

DOI

2022

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications

Xiaoyu Ding, Hui-Yun Zheng, Pan-Pan Zhang, Laima Luo, Yucheng Wu, Jianhua Yao

Journal of Materials Engineering and Performance

DOI

2022

Hydrogen isotope plasma-driven permeation through RAFM steel: isotope exchange and helium irradiation effect

Yue Xu, Kai Yang, Yunfeng Xu, Laima Luo, Junjie Ni, Yucheng Wu

Nuclear Fusion

DOI

2022

The preparation process of ultrafine gain W-Re powder by wet chemical method and its effect on alloy properties

Wang–Zhi Xu, Jing Wang, Laima Luo, Xiang Zan, Yucheng Wu

Materials Today Communications

DOI

2022

Tribological and electrochemical corrosion behaviors of Cu-based powder metallurgy composites reinforced by in-situ WC with different morphology

Zhiwei Wang, Yu Yang Bian, Junjie Ni, Xiaoqiang Li, Yue Xu, Yuxuan Shao, Jinming Zhen, Liping Cai, Laima Luo

Journal of Materials Research and Technology

DOI

2021

粉末冶金及放电等离子体烧结制备Fe-（12-14 mass%）Cr-Y2O3合金的性能

沈倩倩，黄依娜，吴玉程，罗来马

《材料热处理学报》

DOI

2021

Zr、Ti元素掺杂对高比重W-Cu-Ni/Y2O3复合材料的显微组织和性能的影响规律研究

刘东光，张力，罗来马

《中国钨业》

2021

Fe-（9～11）Cr-Y2O3作为ITER结构材料的制备与表征

王珍珍，黄依娜，吴玉程，罗来马

《过程工程学报》

2021

High-strength diffusion bonding of oxide-dispersion-strengthened tungsten and CuCrZr alloy through surface nano-activation and Cu plating

Yuanyuan Chen, Yuan Huang, Fei Li, Lu Han, Dongguang Liu, Laima Luo, Zongqing Ma, Yongchang Liu, Zumin Wang

Journal of Material Science and Technology

DOI

2021

67%变形量纯钨轧板在1250℃退火过程中的再结晶行为

周智伟，王康，昝祥，罗来马，吴玉程

《精密成形工程》

2021

Transient thermal shock and helium ion irradiation damage behaviors of ODS-W/CuCrZr joints

Yuanyuan Chen, Haixue Hou, Gang Yao, Dongguang Liu, Laima Luo, Chong Li, Chenxi Liu, Yuan Huang, Zumin Wang

Materials Characterization

DOI

2021

Effect of surface quality on hydrogen/helium irradiation behavior in tungsten

Hongyu Chen, Qiu Yu Xu, Jiahuan Wang, Peng Li, Julong Yuan, Binghai Lyu, Jinhu Wang, Kazutoshi Tokunaga, Gang Yao, Laima Luo, Yucheng Wu

Nuclear Engineering and Technology

DOI

2021

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

Gang Yao, Xuepeng Liu, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Zumin Wang, Qiu Yu Xu, Yucheng Wu

Materials & Design

DOI

2021

Spontaneous dissociation of H2 and high energy barrier of H invasion on W doped Al2O3(0001) surface

Long Qian, Chunsheng Guo, Xiaojun Xin, Rui Ding, Laima Luo, Xin Zhang, Heng Li, Zilin Cui, Yuhong Xu, Changjian Tang

International Journal of Hydrogen Energy

DOI

2021

The interfacial microstructure and fracture toughness of W/Ta multilayer composites

C. Chen, Shanzhong Yang, Ruirui Liu, Yikai Chen, Y. Mao, Shuo Wang, Z. Zhang, Laima Luo, Yang Wu

Materials Science and Engineering A

DOI

2021

High-strength vacuum diffusion bonding of Cu-plated, sandblasted W and CuCrZr alloy

Yuanyuan Chen, Yuan Huang, Lu Han, Dongguang Liu, Laima Luo, Chong Li, Chenxi Liu, Zumin Wang

Journal of Materials Research and Technology

DOI

2021

Preparation and Characterization of SiO2/α‐Al2O3 Tritium Permeation Barriers at Low Temperature

Yulan Liu, Tingting Yang, Laima Luo, Dong–Guang Liu, Yucheng Wu

Advanced Engineering Materials

DOI

2021

Behavior of high-entropy W-rich alloys Wx(TaVCrTi)y under He+ irradiation

Hongjing Cui, Ning Liu, Laima Luo, Yue Xu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2021

Evaluating surface damage behavior of W-(Y0.9La0.1)2O3 composites during spark plasma sintering process improvement

Gang Yao, Xuepeng Liu, Zhi-Yuan Zhao, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

Microstructure and annealing behavior of three rolled pure tungsten plates with different thickness reduction

Kang Wang, Ya Xi, Xiang Zan, Laima Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2021

Fabrication of diamond/W–Cu functionally graded material by microwave sintering

Chenlong Wei, Jigui Cheng, Mei Zhang, Rui Zhou, Bangzheng Wei, Xinxi Yu, Laima Luo, Pengqi Chen

Nuclear Engineering and Technology

DOI

2021

Fabrication and characterization of W/Cu/Ni-based high specific gravity alloy with Zr and Ti combined addition

Dong–Guang Liu, Peng Zhang, Chong-Fei Ruan, Lin Meng, Laima Luo, Zumin Wang, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Effects of solid–liquid doping and spark plasma sintering on the microstructure and mechanical properties of Y2O3-doped copper matrix composites

Yongqiang Qin, Yu Ming Tian, Yi Zhuang, Laima Luo, Xiang Zan, Yucheng Wu

Vacuum

DOI

2021

Damage evolutions of completely recrystallized W–Y2O3 composite evaluated using the dual effects of electron beam thermal shock and helium ion irradiation

Gang Yao, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Materials Chemistry and Physics

DOI

2021

Evolution of microstructure and texture in a warm-rolled yttria dispersion-strengthened tungsten plate during annealing in the temperature range between 1200 °C and 1350 °C

Kang Wang, Daya Ren, Xiang Zan, Laima Luo, Wolfgang Pantleon, Yucheng Wu

Journal of Alloys and Compounds

DOI

2021

Anisotropy and stability of the mechanical properties of the W alloy plate reinforced with Y-Zr-O particles and prepared by a wet chemical method

Zhihao Zhao, Gang Yao, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Tensile fracture behavior and texture evolution of a hot-rolled W–Y2(Zr)O3 alloy

Zhihao Zhao, Gang Yao, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

Interface diffusion and mechanical properties of ODS-W/Cu prepared by spark plasma sintering

Dong–Guang Liu, Haoran Ma, Chong-Fei Ruan, Laima Luo, Yong Ma, Zumin Wang, Yucheng Wu

Vacuum

DOI

2021

On grain growth and phase precipitation behaviors during W-Cr-Zr alloy densification using field-assisted sintering technology

W.J. Wang, Xiao–Yue Tan, Shenlin Yang, Laima Luo, X.Y. Zhu, Y. Mao, Andrey M. Litnovsky, J.W. Coenen, Ch. Linsmeier, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Zhisheng Yan, Yina Huang, Yucheng Wu, Laima Luo, Lukas Saul, Gang Yao

Journal of Fusion Energy

DOI

2021

Influence of the applied pressure on the microstructure evolution of W-Cr-Y-Zr alloys during the FAST process

Shenlin Yang, W.J. Wang, Xiao–Yue Tan, Huijuan Zhu, Andrey M. Litnovsky, F. Klein, Y. Mao, J.W. Coenen, Ch. Linsmeier, Laima Luo, Ping Li, Yatao Wu

Fusion Engineering and Design

DOI

2021

Effective joining between oxide dispersion strengthened tungsten-based material (ODS-W) and TZM alloy via spark plasma sintering technology

Dong–Guang Liu, Haoran Ma, Chong-Fei Ruan, Laima Luo, Xiang Zan, Zumin Wang, Yucheng Wu

Results in Materials

DOI

2021

Recent progress on preparation routes and performance evaluation of ODS/CDS-W alloys for plasma facing materials in fusion devices

Laima Luo, Zhihao Zhao, Gang Yao, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

Recrystallization behavior of pure tungsten hot-rolled with high accumulated strain during annealing at 1250 °C–1350 °C

Kang Wang, Daya Ren, Xiang Zan, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Materials Science and Engineering A

DOI

2021

Thermal shock and tritium resistance of SiO2 coating on the inner wall of 316L stainless steel pipeline

Dong–Guang Liu, Tingting Yang, Yulan Liu, Laima Luo, Yucheng Wu

Vacuum

DOI

2021

Characteristics of Microstructure Evolution during FAST Joining of the Tungsten Foil Laminate

Xiao–Yue Tan, Wujie Wang, Xiang Chen, Y. Mao, Andrey M. Litnovsky, F. Klein, Pawel Bittner, J.W. Coenen, Ch. Linsmeier, Jiaqin Liu, Laima Luo, Yucheng Wu

Metals

DOI

2020

机械合金化和放电等离子体烧结技术制备Fe-(8/15)Cr合金及其微观结构分析

靳忠伟，黄依娜，吴玉程，罗来马，卫勇

《材料热处理学报》

DOI

2020

聚变堆结构材料表面阻氚涂层的制备与展望

刘东光，张力，郑亮，罗来马

《金属功能材料》

DOI

2020

La2O3含量对湿化学法制备超细W-Y2O3复合材料显微组织与性能影响规律研究

罗来马，赵志远，吴玉程

《中国钨业》

2020

钨层状材料的韧化机理与研究现状

刘家琴，陈翔，谭晓月，王武杰，吴眉，罗来马，朱晓勇，吴玉程

《中国有色金属学报》

2020

Supermodulus effect by grain-boundary wetting in nanostructured multilayers

Jing Wang, Lu Han, Xiaohu Li, Dongguang Liu, Laima Luo, Yuan Huang, Yongchang Liu, Zumin Wang

Journal of Material Science and Technology

DOI

2020

Plasma-surface interaction experimental device: PSIEC and its first plasma exposure experiments on bulk tungsten and coatings

Yue Xu, Yunfeng Xu, Zuosheng Wu, Laima Luo, Xiang Zan, Gang Yao, Ya Xi, Yafeng Wang, Xiaoyu Ding, Hailin Bi, Xiao–Yong Zhu, Qiu Yu Xu, J. Wu, Yucheng Wu

Fusion Engineering and Design

DOI

2020

Design and properties of FeAl/Al2O3/TiO2 composite tritium-resistant coating prepared through pack cementation and sol–gel method

Liu Zhu, Liang Zheng, Hao Xie, Dong–Guang Liu, Qiu Xu, Laima Luo, Yucheng Wu

Materials Today Communications

DOI

2020

Preparation technologies and performance studies of tritium permeation barriers for future nuclear fusion reactors

Laima Luo, Yulan Liu, Dong–Guang Liu, Liang Zheng, Yucheng Wu

Surface and Coatings Technology

DOI

2020

Evolution of microstructure and texture of moderately warm-rolled pure tungsten during annealing at 1300 °C

Kang Wang, Haitao Sun, Xiang Zan, Umberto Maria Ciucani, Wolfgang Pantleon, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2020

Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites

Yongqiang Qin, Yu Ming Tian, Yu–Qiang Peng, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2020

Synthesis of Y2O3-doped WC-Co powders by wet chemical method and its effect on the properties of WC-Co cemented carbide alloy

Yu Yang, Laima Luo, Xiang Zan, Xiao-Yong Zhu, Liu Zhu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2020

The influence of different isochronal annealing temperature on helium ion irradiation damage of W-Nb composites

Hongyu Chen, Yu-Fen Zhou, Mengyao Xu, Laima Luo, Qiu Yu Xu, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2020

D2 retention behavior and microstructural evolution of W-2wt.%Y2O3 alloy during He-ion irradiation at high temperatures

Qiu Yu Xu, Laima Luo, Zhe Chen, M. Hirakawa, M. Miyamoto, HanTuo Chen, Koichi Sato, H. Tsuchida

Journal of Nuclear Materials

DOI

2020

Microstructure evolution and effect on deuterium retention in oxide dispersion strengthened tungsten during He+ irradiation

Xiaoyu Ding, Qiu Yu Xu, Xiao-yong Zhu, Laima Luo, Jianjun Huang, Bin Yu, Xiang Gao, Jiangang Li, Yucheng Wu

Nuclear Engineering and Technology

DOI

2020

High-Performance Al–Si Coatings Toward Enhancing Oxidation Resistance of Tungsten by Halide-Activated Pack Cementation

Liu Zhu, Yuxiang Zhang, Jinfang Wang, Laima Luo

Frontiers in Materials

DOI

2020

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: An Overview

Yucheng Wu, Yu Yang, Xiao–Yue Tan, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Jigui Cheng

Frontiers in Materials

DOI

2020

Effect of Y2O3 on microstructure and mechanical properties of WC-Co-cemented carbides prepared via solid-liquid doping method and spark plasma sintering

Yongqiang Qin, Yu–Qiang Peng, Yu Ming Tian, Laima Luo, Yong Ma, Xiang Zan, Xiao-Yong Zhu, Yucheng Wu

Materials Today Communications

DOI

2020

A powder metallurgy route to fabricate CNT-reinforced molybdenum-hafnium-carbon composites

Yong Wei, Laima Luo, Huai-Bing Liu, Xiang Zan, J. Song, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Materials & Design

DOI

2020

Microstructural evolution and mechanical properties of carbon nanotubes–reinforced TZM composites synthesized by powder metallurgy

Yong Wei, Laima Luo, Xiang Zan, Jiupeng Song, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2020

Transport parameters and permeation behavior of hydrogen isotopes in the first wall materials of future fusion reactors

Yue Xu, Zuosheng Wu, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2020

Influence of helium ion irradiation damage behavior after laser thermal shock of W-2%vol Y2O3 composites

Gang Yao, Xiao–Yue Tan, Laima Luo, Xiang Zan, Yue Xu, Qiu Yu Xu, Xiao–Yong Zhu, Kazutoshi Tokunaga, Yucheng Wu

Progress in Nuclear Energy

DOI

2020

Surface damage during transient thermal load of 50% thickness reduced W-2% (Vol.) Y2O3 sheet with different recrystallization volume fraction

Xiang Zan, Jie Yan, Haitao Sun, Kang Wang, Youyun Lian, Xiao–Yue Tan, Laima Luo, Xiang Liu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2019

陶瓷阻氚涂层的研究现状及进展

黄俊，谢浩，罗来马，张桂凯，汪小琳，吴玉程

《稀有金属》

DOI

2019

钼基材料的强韧化技术研究现状和发展趋势

罗来马，周宇芬，章宇翔，昝祥，刘家琴，朱晓勇，吴玉程

《中国有色金属学报》

DOI

2019

掺杂Y2O3对钨中氘渗透行为的影响

严俊，刘清元，叶小球，吴吉良，蒋春丽，于文臻，饶咏初，谌晓洪，陈长安，罗来马，李强

《材料热处理学报》

DOI

2019

机械球磨时间对W-Nb合金氦辐照行为的影响（英文）

罗来马，徐梦瑶，昝祥，徐虬，朱晓勇，刘家琴，程继贵，吴玉程

《稀有金属材料与工程》

2019

自钝化钨合金在未来核聚变装置中的潜在应用与研究现状

谭晓月，王武杰，吴眉，罗来马，朱晓勇，吴玉程

《材料热处理学报》

DOI

2019

Preparation and properties of FeAl/Al2O3 composite tritium permeation barrier coating on surface of 316L stainless steel

Jun Huang, Hao Xie, Laima Luo, Xiang Zan, Dong–Guang Liu, Yucheng Wu

Surface and Coatings Technology

DOI

2019

Formation and properties of ZrO2–Cu composite nanoglass films

Leqi Yin, Lu Han, Jing Wang, An Zhang, Dongguang Liu, Laima Luo, Yuan Huang, Zumin Wang

Vacuum

DOI

2019

Deuterium irradiation resistance and relevant mechanism in W–ZrC/Sc2O3 composites prepared by spark plasma sintering

Gang Yao, Hongyu Chen, Ming-Qi Fu, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Progress in Nuclear Energy

DOI

2019

Deuterium concentration depth profiling in sputter-deposited tungsten coated F82H using secondary ion mass spectrometry

Yue Xu, Yoshi Hirooka, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2019

Functionally Graded W-Cu Materials Prepared from Cu-Coated W Powders by Microwave Sintering

Wenchao Chen, Pengqi Chen, Jianfeng Li, Jianhua Zhang, Laima Luo, Jigui Cheng

Journal of Materials Engineering and Performance

DOI

2019

Effect of annealing on the microstructure behavior of D+-irradiated W-2vol.%TiC composite prepared by wet-chemical method

Yu-Xiang Zhang, Xiao–Yue Tan, Xiang Zan, Laima Luo, Yue Xu, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Microstructural evolution in W-1%TiC alloy irradiated He ions at high temperatures

Qiu Yu Xu, Hongyu Chen, Laima Luo, M. Miyamoto, Masayuki TOKITANI, Yucheng Wu

Tungsten

DOI

2019

Microstructure evolutions of the W–TiC composite conducted by dual-effects from thermal shock and He-ion irradiation

Yu-Fen Zhou, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Tungsten

DOI

2019

Effect of W-coated diamond on the microstructure and thermal conductivity of diamond/W matrix composites for plasma-facing materials (PFMs)

Dong–Guang Liu, Liang Zheng, Li Zhang, Xiao–Yue Tan, Laima Luo, Haoran Ma, Jiaqin Liu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Recrystallization kinetics of 50% hot-rolled 2% Y2O3 dispersed tungsten

Xiang Zan, Mu Gu, Kang Wang, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Combined effect of laser thermal shock and helium ion irradiation on W-Y2O3 composites

Yu-Xiang Zhang, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Surface damage evolution during transient thermal shock of W-2%vol Y2O3 composite material in different surfaces

Gang Yao, Xiao–Yue Tan, Laima Luo, Kai-Jun Hong, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Youyun Lian, Xiang Liu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Effect of Y2O3 particles on the helium ion irradiation damage of W-2%Y2O3 composite prepared by wet chemical method

Gang Yao, Laima Luo, Xiao–Yue Tan, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Eryang Lu, Xing-Zhong Cao, Jigui Cheng, Yucheng Wu

Materialia

DOI

2019

Microstructure and Its High Temperature Oxidation Behavior of W-Cr Alloys Prepared by Spark Plasma Sintering

Qingqing Hou, Ke Huang, Laima Luo, Xiao–Yue Tan, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Materialia

DOI

2018

核聚变堆用钨及钨基材料热负荷损伤行为的研究进展

吴玉程，姚刚，罗来马，昝祥，朱晓勇，李萍，程继贵

《中国有色金属学报》

2018

掺杂复合稀土氧化物对W-20Cu复合材料组织与性能的影响（英文）

陈会培，程继贵，张明龙，陈闻超，魏邦争，陈鹏起，罗来马，吴玉程

《稀有金属材料与工程》

2018

TiC含量对W-30Cu/TiC复合材料显微结构和性能的影响（英文）

谌景波，黄丽枚，罗来马，昝祥，吴玉程

《稀有金属材料与工程》

2018

自蔓延高温合成高熔点粉体的研究现状与发展

罗来马，章宇翔，昝祥，刘家琴，朱晓勇，吴玉程

《稀有金属》

2018

Effect of Silver Element on Microstructure and Properties of W-30Cu/TiC Composites

Xiaoli Chen, Laima Luo, Zan Xiang, Xiaoyong Zhu, Yucheng Wu

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2018

第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展

吴玉程，卫勇，罗来马，昝祥，朱晓勇，罗广南，陈俊凌

《核聚变与等离子体物理》

2018

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Yu-Fen Zhou, Zhi-Yuan Zhao, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yu-Cheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Preparation of ultrafine-grained/nanostructured tungsten materials: An overview

Yucheng Wu, Qingqing Hou, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Ping Li, Qiu Yu Xu, Jigui Cheng, Guang–Nan Luo, Jun–Ling Chen

Journal of Alloys and Compounds

DOI

2018

TEM studies of 1 MeV Fe+ ion-irradiated W alloys by wet chemical method: high-temperature annealing and deuterium retention

Xiaoyu Ding, Jiaqin Liu, Laima Luo, Qiu Yu Xu, Xiang Gao, Jianjun Huang, Bin Yu, Jiangang Li, Yucheng Wu

Nuclear Fusion

DOI

2018

Isotropic thermal conductivity in rolled large-sized W-Y2O3 bulk material prepared by powder metallurgy route and rolling deformation technology

Gang Yao, Xiao–Yue Tan, Ming-Qi Fu, Laima Luo, Xiang Zan, Qiu Yu Xu, Jiaqin Liu, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Tungsten-coated diamond powders prepared by microwave-heating salt-bath plating

Chenlong Wei, Jigui Cheng, Jian‐Feng Li, Wenchao Chen, Pengqi Chen, Laima Luo, Junwu Liu

Powder Technology

DOI

2018

Microstructure and transient laser thermal shock behavior of W–TiC–Y2O3 composites prepared by wet chemical method

Mengyao Xu, Laima Luo, Jin–Shan Lin, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2018

Effect of laser beam thermal shock on the helium ion irradiation damage behavior of W-TiC-Y2O3 composites

Mengyao Xu, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2018

An overview of oxidation-resistant tungsten alloys for nuclear fusion

Dong–Guang Liu, Liang Zheng, Laima Luo, Xiang Zan, Jiupeng Song, Qiu Yu Xu, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2018

Nanosized copper powders prepared by gel-casting method and their application in lubricating oil

Wenchao Chen, Jigui Cheng, Hui-pei CHEN, Nan-min YE, Bangzheng Wei, Laima Luo, Yucheng Wu

Transactions of Nonferrous Metals Society of China

DOI

2018

Helium irradiation behavior of tungsten-niobium alloys under different ion energies

Meng-Yao Xu, Laima Luo, Yu-Feng Zhou, Xiang Zan, Yue Xu, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Thermal stability and evolution of microstructures induced by He irradiation in W–TiC alloys

Q. Xu, Xiaoyu Ding, Laima Luo, M. Miyamoto, Masayuki TOKITANI, J. Zhang, Yucheng Wu

Nuclear Materials and Energy

DOI

2018

Influence of Nb content on the microstructure and deuterium retention of W–Nb alloys

Laima Luo, Jingbo Chen, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Microstructure and helium irradiation performance of W–ZrC/Sc 2 O 3 composites prepared spark plasma sintering

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Te Zhu, Jiaqin Liu, Jigui Cheng, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Microstructure and damage behavior of W–Cr alloy under He irradiation

Ke Huang, Laima Luo, Xiang Zan, Qiu Yu Xu, Dong–Guang Liu, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2018

Numerical Simulation and Experimental Research of the Hydrostatic Extrusion Process of Pure Tungsten

Shengqiang Du, Kai-Jun Hong, Xiang Zan, Ping Li, Laima Luo, Yang Yu, Yucheng Wu

Springer proceedings in energy

DOI

2018

Effect of Rare Earth Oxide Addition on the Microstructure and Properties of Ultrafine Grain W-20Cu Composites

Chen Huipei, Cheng Jigui, Zhang Minglong, Chen Wenchao, Bangzheng Wei, Chen Pengqi, Luo Laima, WU Yu-cheng

《稀有金属材料与工程》

DOI

2018

Influence of TiC Content on Microstructure and Properties of W-30Cu/TiC Composites

Chen Jingbo, Huang Limei, Luo Laima, Zan Xiang, WU Yu-cheng

《稀有金属材料与工程》

DOI

2017

不同轧制比纯钨1250～1350℃下的再结晶行为

余明，王康，昝祥，罗来马，吴玉程

《材料热处理学报》

2017

W/Si复合材料的制备及抗激光冲击性能

陈泓谕，罗来马，林锦山，昝祥，朱晓勇，吴玉程

《中国有色金属学报》

2017

微量元素Nb、C强化W-Lu2O3复合材料的组织及性能

张俊，罗来马，朱晓勇，罗广南，程继贵，吴玉程

《稀有金属材料与工程》

2017

Preparation and properties of fine-grained and ultrafine-grained W-TiC-Y2O3 composite

Jin–Shan Lin, Laima Luo, Ke Huang, Xiang Zan, Qiu Yu Xu, Jiaqin Liu, Xiao-Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Preparation of TiC-doped W-Ti alloy and heat flux performance test under laser beam facility

Jing Shi, Laima Luo, Shuang Wang, Wei-Qi Pan, Qiu Yu Xu, Xiang Zan, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Thermal shock behavior of W–ZrC/Sc2O3 composites under two different transient events by electron and laser irradiation

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Jia-Qin Liu, Xiao–Yong Zhu, Ji-Gui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2017

Residual stress relief of hard a-C films though buckling

D.G. Liu, Liang Zheng, J.Q. Liu, Laima Luo, Yucheng Wu

Ceramics International

DOI

2017

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Jia-Qin Liu, Dong–Guang Liu, Xiao–Yong Zhu, Ji-Gui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Repair behavior of He+-irradiated W–Y2O3 composites after different temperature-isochronal annealing experiments

Gang Yao, Xiao–Yue Tan, Laima Luo, Xiang Zan, Jiaqin Liu, Qiu Yu Xu, Xifao-Yong Zhu, Yucheng Wu

Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms

DOI

2017

Microstructure and performances of W–TiC–Y2O3 composites prepared by mechano-chemical and wet-chemical methods

Jin–Shan Lin, Yuchen Hao, Laima Luo, Meiling Zhao, Qiu Yu Xu, Xiang Zan, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2017

D2 retention and microstructural evolution during He irradiation in candidate plasma facing material W-La2O3 alloy

Q. Xu, Xiaoyu Ding, Laima Luo, M. Miyamoto, Masayuki TOKITANI, J. Zhang, Yucheng Wu

Journal of Nuclear Materials

DOI

2017

Investigation of W–B behavior during short transient events by laser irradiation

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Surface metallization of Cu/Ni/Au coatings on diamond/Cu composite materials for heat sink application

D.G. Liu, Yongjin Mai, Jian Fei Sun, Z.J. Luan, Wenchao Shi, Laima Luo, Huijun Li, Yucheng Wu

Ceramics International

DOI

2017

Hardness loss and microstructure evolution of 90% hot-rolled pure tungsten at 1200–1350 °C

Mingquan Yu, Kang Wang, Xiang Zan, Wolfgang Pantleon, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Microstructure and deuterium retention after ion irradiation of W–Lu 2 O 3 composites

Jin–Shan Lin, Laima Luo, Qiu Yu Xu, Xiang Zan, Te Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2017

Microstructure and properties of La2O3 doped W composites prepared by a wet chemical process

Jianfeng Li, Jigui Cheng, Bangzheng Wei, Minglong Zhang, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2017

Effects of thickness reduction on recrystallization process of warm-rolled pure tungsten plates at 1350 °C

Kang Wang, Xiang Zan, Mingquan Yu, Wolfgang Pantleon, Laima Luo, Xiao–Yong Zhu, Ping Li, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Super-low friction nickel based carbon nanotube composite coating electro-deposited from eutectic solvents

D.G. Liu, Jianfei Sun, Z.X. Gui, K.J. Song, Laima Luo, Yucheng Wu

Diamond and Related Materials

DOI

2017

Comparison of Hydrostatic Extrusion between Pressure-Load and Displacement-Load Models

Shengqiang Du, Xiang Zan, Ping Li, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Metals

DOI

2017

Effect of Ni Content on Microstructure and Properties of WC-Ni Composites Prepared by Electroless Plating and Powder Metallurgy

Chen Hongyu, Zhaocheng Wang, Luo Laima, Zhu Liu, Zhibiao Tu, WU Yu-cheng

《稀有金属材料与工程》

DOI

2016

化学镀和粉末冶金法制备W/Cu梯度热沉材料（英文）

罗来马，谭晓月，丁孝禹，卢泽龙，罗广南，昝翔，朱晓勇，吴玉程

《稀有金属材料与工程》

2016

W-Ni/Yb2O3复合材料的制备及烧结性能

赵美玲，罗来马，王爽，谭晓月，朱晓勇，昝祥，吴玉程

《稀有金属材料与工程》

2016

超细Y2O3/W-Cu复合粉体的制备及其烧结体的组织性能

张明龙，程继贵，陈会培，李剑峰，罗来马，吴玉程

《材料热处理学报》

2016

掺杂合金元素面向等离子体钨基材料的研究现状与发展趋势

罗来马，施静，昝祥，李萍，罗广南，陈俊凌，吴玉程

《中国有色金属学报》

2016

轧膜成形制备W-Cu层状功能梯度材料及其性能研究

沈晓，程继贵，李剑峰，陈闻超，卫陈龙，罗来马，吴玉程

《粉末冶金工业》

2016

Damage behavior of REE-doped W-based material exposed to high-flux transient heat loads

Jing Shi, Laima Luo, Jin–Shan Lin, Xiang Zan, Xiao–yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2016

Influence of ball milling processing on the microstructure and characteristic of W–Nb alloy

Jingbo Chen, Laima Luo, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2016

Microstructure and performance of rare earth element-strengthened plasma-facing tungsten material

Laima Luo, Jing Shi, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Scientific Reports

DOI

2016

Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc2O3 composites

Hongyu Chen, Laima Luo, Jingbo Chen, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Guang–Nan Luo, Junling Chen, Yucheng Wu

Scientific Reports

DOI

2016

Effect of mechanical alloying on the microstructure and properties of W–Ti alloys fabricated by spark plasma sintering

Shuang Wang, Laima Luo, Jing Shi, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Powder Technology

DOI

2016

Effect of second-phase particles on the properties of W-based materials under high-heat loading

Xiao–Yue Tan, Ping Li, Laima Luo, Qiu Yu Xu, Kazutoshi Tokunaga, Xiang Zan, Yucheng Wu

Nuclear Materials and Energy

DOI

2016

Thermal shock behavior of W-0.5 wt% Y2O3 alloy prepared via a novel chemical method

Meiling Zhao, Laima Luo, Jing-Shan Lin, Xiang Zan, Xiao-Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2016

Investigation of microstructure and irradiation behavior of W–Nb/Ti composites prepared by spark plasma sintering

Jingbo Chen, Laima Luo, Meiling Zhao, Qiu Yu Xu, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2016

Properties of Lu2O3 doped tungsten and thermal shock performance

Shuang Wang, Jun Zhang, Laima Luo, Xiang Zan, Qiu Yu Xu, Xiao–Yong Zhu, Kazutoshi Tokunaga, Yucheng Wu

Powder Technology

DOI

2016

Microstructure and properties of TiN-reinforced W–Ti alloys prepared by spark plasma sintering

Shuang Wang, Laima Luo, Meiling Zhao, Xiang Zan, Xiao-Yong Zhu, Guang–Nan Luo, Yucheng Wu

Powder Technology

DOI

2016

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten via Spark Plasma Sintering

Xiaoyu Ding, Laima Luo, Hongyu Chen, Xiao–Yong Zhu, Xiang Zan, Jigui Cheng, Yucheng Wu

Materials

DOI

2016

Fabrication of W/Cu Graded Heat-sink Materials by Electroless Plating and Powder Metallurgy

Luo Laima, Tan Xiaoyue, Xiaoyu Ding, Ze-Long Lu, Luo Guangnan, Zan Xiang, Xiaoyong ZHU, WU Yu-cheng

《稀有金属材料与工程》

DOI

2015

真空等离子喷涂钨涂层组织与热行为研究（英文）

朱晓勇，罗来马，李萍，陈俊凌，罗广南，吴玉程

《稀有金属材料与工程》

2015

活化处理对W-1.5% TiC复合粉体烧结行为影响规律研究

丁孝禹，罗来马，黄丽枚，罗广南，昝祥，朱晓勇，吴玉程

《稀有金属材料与工程》

2015

压制压力对纯钨显微组织和力学性能的影响

石俊，刘宁，刘爱军，苏宇，吴玉程，罗来马

《热处理》

2015

核聚变堆用钨及钨合金辐照损伤研究进展

丁孝禹，罗来马，黄丽枚，罗广南，李萍，吴玉程

《稀有金属》

2015

化学镀和粉末冶金法制备W-15Cu复合材料及性能研究（英文）

罗来马，谭晓月，卢泽龙，罗广南，昝祥，程继贵，吴玉程

《稀有金属材料与工程》

2015

钨基材料强韧化技术的现状与发展趋势

王爽，罗来马，赵美玲，罗广南，朱晓勇，吴玉程

《稀有金属》

2015

简化预处理辅助化学镀制备Cu包覆TiC复合粉末（英文）

卢泽龙，罗来马，黄新民，谭晓月，丁孝禹，程继贵，朱流，吴玉程

《材料热处理学报》

2015

纤维增韧钨基复合材料的研究现状

陈泓谕，罗来马，谭晓月，李萍，吴玉程

《机械工程材料》

2015

W-Ni/TiC复合材料的制备与组织

赵美玲，罗来马，李浩，伍枝正，张延召，吴玉程

《材料热处理学报》

2015

Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS

Hongyu Chen, Laima Luo, Jun Zhang, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2015

Effect of mechanical milling on the microstructure of tungsten under He+ irradiation condition

Xiao–Yue Tan, Ping Li, Laima Luo, Hongyu Chen, Xiang Zan, Te Zhu, Guang–Nan Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2015

Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation

Xiao–Yue Tan, Laima Luo, Hongyu Chen, Xiao–Yong Zhu, Xiang Zan, Guang–Nan Luo, Junling Chen, Ping Li, Jigui Cheng, Dongping Liu, Yucheng Wu

Scientific Reports

DOI

2015

Effects of TiN nanoparticles on the microstructure and properties of W–30Cu composites prepared via electroless plating and powder metallurgy

Limei Huang, Laima Luo, Meiling Zhao, Guang–Nan Luo, Xiao–Yong Zhu, Jigui Cheng, Xiang Zan, Yucheng Wu

Materials & Design (1980-2015)

DOI

2015

The influence of TiB2 content on microstructure and properties of W–30Cu composites prepared by electroless plating and powder metallurgy

Limei Huang, Laima Luo, Jigui Cheng, Xiao–Yong Zhu, Yucheng Wu

Advanced Powder Technology

DOI

2015

Synthesis and formation mechanism of W/TiC composite powders by a wet chemical route

Xiao–Yue Tan, Laima Luo, Hongyu Chen, Ping Li, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2015

Microstructure and properties of W/Sm2O3 composites prepared spark plasma sintering

Xiao-Yong Zhu, Jun Zhang, Laima Luo, Junling Chen, Jigui Cheng, Yucheng Wu

Advanced Powder Technology

DOI

2015

Fabrication of W–1 wt.% TiC composites by spark plasma sintering

Xiaoyu Ding, Laima Luo, Hongyu Chen, Guang–Nan Luo, Xiao-Yong Zhu, Xiang Zan, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2015

Effect of Sc2O3 particles on the microstructure and properties of tungsten alloy prepared by spark plasma sintering

Hongyu Chen, Laima Luo, Jingbo Chen, Ping Li, Guang–Nan Luo, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2015

Preparation and Properties of W-15Cu Composite by Electroless Plating and Powder Metallurgy

Luo Laima, Tan Xiaoyue, Ze-Long Lu, Luo Guangnan, Zan Xiang, Cheng Jigui, WU Yu-cheng

《稀有金属材料与工程》

DOI

2015

Thermal Performance and Microstructure of Vacuum Plasma Sprayed Tungsten Coatings under Cyclic Heat Load

Xiaoyong ZHU, Luo Laima, Ping Li, Chen Junling, Luo Guangnan, WU Yu-cheng

《稀有金属材料与工程》

DOI

2014

面向等离子体ODS-W复合材料的制备工艺

张俊，朱晓勇，罗来马，罗广南，程继贵，吴玉程

《核聚变与等离子体物理》

2014

钨铜复合材料的研究进展

黄丽枚，罗来马，丁孝禹，罗广南，昝祥，洪雨，吴玉程

《机械工程材料》

2014

湿化学法制备W-TiC复合粉体及其SPS烧结行为

丁孝禹，罗来马，黄丽枚，罗广南，李萍，朱晓勇，吴玉程

《中国有色金属学报》

2014

第一壁材料W/Cu界面设计与制备研究现状

罗来马，谭晓月，罗广南，昝祥，朱晓勇，吴玉程

《核聚变与等离子体物理》

2014

Preparation of TiC/W core–shell structured powders by one-step activation and chemical reduction process

Xiaoyu Ding, Laima Luo, Limei Huang, Guang–Nan Luo, Xiao-Yong Zhu, Jigui Cheng, Yucheng Wu

Journal of Alloys and Compounds

DOI

2014

Chemically produced tungsten–praseodymium oxide composite sintered by spark plasma sintering

Xiaoyu Ding, Laima Luo, Ze-Long Lu, Guang–Nan Luo, Xiao-Yong Zhu, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2014

Influence of TiN nanoparticles on the microstructure and properties of W matrix materials prepared by spark plasma sintering

Shuang Wang, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Xiao-Yong Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2014

Fabrication of W–Cu/La2O3 composite powder with a novel pretreatment prepared by electroless plating and its sintering characterization

Laima Luo, Ze-Long Lu, Huang Xin-min, Xiao–Yue Tan, Guang–Nan Luo, Jigui Cheng, Xiang Zan, Xiao-Yong Zhu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2014

Study on activated W powders by chemical activation pretreatment and its sintering behavior

Xiaoyu Ding, Laima Luo, Limei Huang, Xiao–Yue Tan, Hao Li, Guang–Nan Luo, Xiang Zan, Yu Hong, Jigui Cheng, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2014

Microstructure and properties of tungsten–samarium oxide composite prepared by a novel wet chemical method and spark plasma sintering

Xiaoyu Ding, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Ping Li, Xiang Zan, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2014

Effects of simplified pretreatment process on the morphology of W–Cu composite powder prepared by electroless plating and its sintering characterization

Limei Huang, Laima Luo, Xiaoyu Ding, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2014

Preparation and characteristics of W–1wt.% TiC alloy via a novel chemical method and spark plasma sintering

Laima Luo, Xiao–Yue Tan, Hongyu Chen, Guang–Nan Luo, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2014

Fabrication of W–Cu/CeO2 composites with excellent electric conductivity and high strength prepared from copper-coated tungsten and Ceria powders

Ze-Long Lu, Laima Luo, Jingbo Chen, Huang Xin-min, Jigui Cheng, Yucheng Wu

Materials Science and Engineering A

DOI

2014

Effect of doped niobium on the microstructure and properties of W–Nb/TiC composites prepared by spark plasma sintering

Laima Luo, Jingbo Chen, Hongyu Chen, Guang–Nan Luo, Xiao–Yong Zhu, Jigui Cheng, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2014

Development of tungsten as plasma-facing materials by doping tantalum carbide nanoparticles

Xiao–Yue Tan, Laima Luo, Ze-Long Lu, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2014

Electroless plating of copper on Al2O3 and its heat treatment behaviour

Zhongliang Lu, Z.C. Wang, Laima Luo, Xiaoguang Huang, Xiao–Yue Tan, J.-B. Chen, J-G. Cheng, Yucheng Wu

Surface Engineering

DOI

2014

Effect of doped Lu2O3 on the microstructures and properties of tungsten alloy prepared by spark plasma sintering

Jun Zhang, Laima Luo, Xiao-Yong Zhu, Hongyu Chen, Junling Chen, Xiang Zan, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2013

非贵金属活化预处理化学镀Ni包覆TiC陶瓷粉体的研究

朱流，罗来马，吴玉程，程继贵

《材料热处理学报》

2013

国际热核试验堆第一壁材料的研究进展

丁孝禹，李浩，罗来马，黄丽枚，罗广南，昝祥，朱晓勇，吴玉程

《机械工程材料》

2013

稀土改性钨合金的研究现状与发展趋势

罗来马，卢泽龙，李浩，罗广南，昝祥，吴玉程

《稀有金属》

2013

Sintering behavior of W–30Cu composite powder prepared by electroless plating

Laima Luo, Xiao–Yue Tan, Ze-Long Lu, Xiao-Yong Zhu, Xiang Zan, Guang–Nan Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2013

A specific chemical activation pretreatment for electroless nickel plating on SiC ceramic powders

Laima Luo, Ze-Long Lu, Xiao–Yue Tan, Xiaoyu Ding, Limei Huang, Jigui Cheng, Liu Zhu, Yucheng Wu

Powder Technology

DOI

2013

PREPARATION OF ULTRAFINE W – Cu COMPOSITE POWDER USING ULTRASONIC-ASSISTED ELECTROLESS PLATING

Limei Huang, Laima Luo, Xiaoyu Ding, Xiang Zan, Yu Hong, Jigui Cheng, Yucheng Wu, Guang–Nan Luo, Liu Zhu

Modern Physics Letters B

DOI

2012

超细/纳米W-Cu复合粉末制备的研究进展

黄丽枚，罗来马，吴玉程，罗广南

《稀有金属与硬质合金》

2012

The influence of powder characteristics on mechanical properties of Al2O3–TiC–Co ceramic materials prepared by Co‐coated Al2O3/TiC powders

Liu Zhu, Laima Luo, Jian Li, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2011

Effect of electroless plating Ni–Cu–P layer on brazability of cemented carbide to steel

Liu Zhu, Laima Luo, Juan Luo, Yucheng Wu, Jian Li

Surface and Coatings Technology

DOI

2011

Effect of electroless plating Ni–Cu–P layer on the wettability between cemented carbides and soldering tins

Liu Zhu, Laima Luo, Juan Luo, Jian Li, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2011

Preparation of nickel-coated tungsten carbide powders by room temperature ultrasonic-assisted electroless plating

Laima Luo, Yucheng Wu, Jian Li, Yuchun Zheng

Surface and Coatings Technology

DOI

2010

Thermal shock resistance of FeMnCrAl/Cr3C2–Ni9Al coatings deposited by high velocity arc spraying

Laima Luo, Shaoguang Liu, Jian Li, Yucheng Wu

Surface and Coatings Technology

DOI

2010

Oxidation behavior of arc-sprayed FeMnCrAl/Cr3C2–Ni9Al coatings deposited on low-carbon steel substrates

Laima Luo, Shaoguang Liu, Jian Li, WU Yu-cheng

Surface and Coatings Technology

DOI

会议论文

2014

化学镀法制备超细W-Cu复合粉体

谭晓月，罗来马，黄丽枚，朱晓勇，昝祥，吴玉程

《安徽省机械工程学会第八次会员代表大会暨学会成立50周年庆典》

预印本

2025

The Influence of Heat Treatment at Different Stages on the Synthesis of Cu-Y2o3 Via Mechanical Alloying and Spark Plasma Sintering

Junying Wei, Bing Ma, Laima Luo, Yifan Zhang, Jing Wang, Jie Xu, Jiaqin Liu, Yucheng Wu

SSRN Electronic Journal

DOI

2025

Ceo2 Preparation and Properties of Modified Wc-10fenico Ultra-Fine Grain Size Cemented Carbide

Yongqiang Qin, Lunke He, Bing Ma, Tian-xu Qiu, Laima Luo, Yucheng Wu

SSRN Electronic Journal

DOI

2025

Fine Powder Spreading Behavior and Simulation Validation in Binder Jet 3d Printing Process

Junyu Tang, Jiaqin Liu, Xiaoyong ZHU, Laima Luo, Xiaojie Wang, Yucheng Wu

SSRN Electronic Journal

DOI

2025

Microstructure and Performance Study of WC-12Co Cemented Carbide Fabricated by Material Extrusion Additive Manufacturing

Laima Luo, Min–Hui Wang, Yongqiang Qin, Xiang Zan, Yucheng Wu

SSRN Electronic Journal

DOI

2023

One-Step Preparation of Α-Al2o3/Sio2 Composite Tritium Permeation Barrier Via Slurry Spin Coating Method and Performance Investigation

Dongguang Liu, Jinxin Zou, Tingting Yang, Siwei Zhou, Luo Laima, Chunfu Hong

Research Square

DOI

2022

In Situ Observation of the Atomic-scale High-temperature Phase Transition Enhancement Mechanism at the ODS-W Interface

Guoqing Wei, Luo Laima, Qi Zhang, Xuepeng Liu, Yifan Zhang, Haixin Li, Zhipeng Li, Yucheng Wu

Research Square

DOI

书籍章节

2014

Microstructure and properties of W-TiC/Cf composites prepared by spark plasma sintering

Huilin Chen, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Ping Li, Xiang Zan, Xiao–Yong Zhu, Yang Wu

Elsevier eBooks

DOI

此主页由公开资料整理，尚未经学者本人认领。