百晓学者学者目录

彭旭东

浙江工业大学机械工程学院

个人简介

彭旭东,浙江工业大学机械工程学院教授、博士生导师,现任高端装备摩擦学与流体密封技术研究所所长。研究方向为流体密封技术、气体动压润滑密封及高端装备滑动轴承。主持国家自然科学基金项目7项、国家重点基础研发计划项目和国防973项目子专题各1项,发表学术论文300余篇,获国家发明专利75件。

精选作品

期刊论文

  1. 郭世博,孟祥铠,赵文静,王梦娇,江锦波,彭旭东(2026). 基于热流固耦合模型的涡轮泵螺旋槽端面密封启动特性分析. 《化工学报》.
  2. 章凯,冯晓东,孟祥铠,江锦波,赵文静,彭旭东(2026). 气体润滑机械密封端面型槽的拓扑优化. 《化工学报》.
  3. 陈源,郑施源,李运堂,熊典峰,王冰清,彭旭东(2026). 高速高温箔片端面密封热气弹耦合性能分析. 《化工学报》.
  4. 张孟丽,江锦波,彭旭东,洪军,许永利,孟祥铠(2026). 静子面动压槽深分布对双流环密封瓦浮起和温升特性影响研究. 《中国机械工程》.
  5. 王梦娇,崔永琪,孟祥铠,江锦波,彭旭东(2026). 波浪沟槽微织构对CuAl10Fe5Ni5摩擦学性能影响研究. 《摩擦学学报(中英文)》.
  6. 王梦娇,王澳,孟祥铠,彭旭东,王金清(2026). 金属离子配位自组装氧化石墨烯涂层摩擦学特性研究. 《摩擦学学报(中英文)》.DOI
  7. 苗育欣,马艺,吴旭杭,孟祥铠,彭旭东(2026). 快速氢减压下橡胶密封微元体空腔演化特性. 《液压气动与密封》.
  8. 师博闻,孟祥铠,王梦娇,赵文静,彭旭东(2026). 轴向激励下液氧涡轮泵机械密封动态响应特性研究. 《摩擦学学报(中英文)》.
  9. Jie Liu, Wenjing Zhao, Xiangkai Meng, Kun Li, Xiang Li, Siyun Ding, Xudong Peng (2026). Deformation Characteristics of the High-Pressure Mechanical Seal Based on the Thermo-Elasto-Hydrodynamic Lubrication Model. Lubricants.DOI
  10. Xi Zhang, Yishen Fang, Jinbo Jiang, Jing Zheng, Sun Shengdi, Jian Peng, Xianzhi Hong, Daquan Tang, Hong Wei Yu, Xudong Peng (2026). Condensation flow phenomena in compressible steam flow through tandem-orifice hydrostatic dry gas seals. Physics of Fluids.DOI
  11. Ming Ye, Xiangkai Meng, Yi Ma, Jinbo Jiang, Wenjing Zhao, Xudong Peng (2026). Study on Dynamic Characteristics of Mechanical Seal Bellows Assembly for Turbopump Under Base Excitation. Applied Sciences.DOI
  12. Mingqiang Ren, Yi Ma, Xiangkai Meng, Xudong Peng, Jinbo Jiang (2026). Transient Lubrication Characteristics and Wear Behavior in VL-Type Reciprocating Seals. Journal of Tribology.DOI
  13. Xi Zhang, Xudong Dai, Duo Xu, Jinbo Jiang, Zhongjin Ni, Xudong Peng, Minfeng Yu (2026). Study on the leakage characteristics of actively flexible supported cylindrical gas film seals under large eccentricity. Flow Measurement and Instrumentation.DOI
  14. Fan Wu, Jinbo Jiang, Xudong Peng, Xiangkai Meng (2026). Study on the coupled deformation characteristics and parameter effects of dry gas seals in natural gas pipeline compressors. International Communications in Heat and Mass Transfer.DOI
  15. Xuan Zhang, Duo Xu, Zhong-Jin Ni, Jin-Bo Jiang, Shengdi Sun, Xudong Peng, Min-Feng Yu, Kang Li (2026). Study on the sealing performance and regulation mechanism of a novel four-zone airbag-foil flexible support cylindrical clearance seal. Aerospace Science and Technology.DOI
  16. Meng-Li Zhang, Jin-Bo Jiang, Xudong Peng, Jun Hong, Yongli Xu, Zhongwai Guo, Xuan Zhang (2026). Study on the cross-flow and temperature rise characteristics of double-flow-ring seals with functional grooves in air-hydrogen intermediate section. International journal of thermal sciences.DOI
  17. 江锦波,陈竹鑫,肖洋溢,彭新,陈源,于辰,孟祥铠,彭旭东(2025). 运行工况对超临界CO2干气密封端面热力学过程及稳态性能影响研究. 《化工学报》.
  18. 潘嘉阳,江锦波,彭旭东,孟祥铠,马艺(2025). 双面开槽石墨圆周密封分层计算模型及开槽位置影响研究. 《化工学报》.
  19. 陈源,陈隆,彭旭东,赵厚锐,王丹,李运堂,王冰清(2025). 热气弹多场耦合下航空发动机弹性箔片柱面气膜密封热效应影响研究. 《机械工程学报》.
  20. 李雨诗,陈源,李运堂,彭旭东,王冰清,李孝禄(2025). 新型柔性坝箔片端面气膜密封变形协调分析及性能智能优化. 《化工学报》.
  21. 王梦娇,胡凯学,孟祥铠,江锦波,彭旭东(2025). 碳化硅表面微织构尺寸和面密度对滑动密封面摩擦学性能的影响. 《化工学报》.
  22. 余嘉桐,孟祥铠,赵文静,刘磊,张力豪,彭旭东(2025). 热力耦合作用下涡轮泵用镶装式机械密封端面变形规律研究. 《化工学报》.
  23. 张俊杰,陈源,李运堂,李孝禄,王冰清,彭旭东(2025). 超椭圆织构浮动坝箔片端面气膜密封动态性能分析与优化. 《化工学报》.
  24. 李学萍,孟祥铠,韩丽云,赵文静,彭旭东(2025). 分部式多孔质T型槽机械密封耦合模型与性能分析. 《摩擦学学报(中英文)》.DOI
  25. 王梦娇,胡新政,刘焜,樊学峰,孟祥铠,彭旭东,王金清(2025). 激光微织构排布方式对铝青铜摩擦学性能影响研究. 《摩擦学学报(中英文)》.DOI
  26. 潘永健,陈源,李运堂,彭旭东,江锦波,章聪(2025). 超临界二氧化碳柔性坝箔片端面气膜密封运行机理及性能分析. 《摩擦学学报(中英文)》.
  27. 侯正烜,孟祥铠,师博闻,赵文静,刘磊,彭旭东(2025). 涡轮泵动静压机械密封端面液氧相变特性研究. 《摩擦学学报(中英文)》.
  28. 宋轩敏,孟祥铠,江锦波,马艺,彭旭东(2025). 核主泵可倾瓦主推力轴承热弹流润滑模型与性能研究. 《高技术通讯》.
  29. 杨任义,孟祥铠,赵文静,马艺,彭旭东(2025). 气液深冷介质典型动压端面密封性能对比. 《高技术通讯》.
  30. 王冰清,李晓暄,彭旭东,李运堂,陈源,金杰(2025). 宽温高湿环境下油水两相O形液压杆封性能分析. 《润滑与密封》.
  31. 尹佳乐,赵文静,孟祥铠,江锦波,彭旭东(2025). 基于压电陶瓷的机械密封端面变形可控研究. 《工程科学与技术》.
  32. Bingqing Wang, Xiaoxuan Li, Yuntang Li, Xudong Peng, Yuan Chen, Xiaolu Li (2025). Multiobjective Structure–Material Codesign Optimization of Hydraulically Controllable Reciprocating Seals With Mixed Thermoelastohydrodynamic Lubrication Analysis. Journal of Tribology.DOI
  33. Xuan Zhang, Jinbo Jiang, Jianbing Peng, Jing Zheng, Xianzhi Hong, Daquan Tang, Xudong Peng, Hong Wei Yu, Duo Xu, Zhongrong Zhou (2025). Study on the steady-state performance and condensation phase change flow of steam hydrostatic dry gas seals. Thermal Science and Engineering Progress.DOI
  34. Bingqing Wang, Xiaoxuan Li, Yu Liao, Yuntang Li, Xudong Peng, Yuan Chen (2025). Sealing characteristics and control strategies of hydraulically controllable rod seal for deep-sea hydraulic manipulators. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  35. Ma Yi, Min Liu, Xiangkai Meng, Xudong Peng, Jinbo Jiang (2025). Transient sealing performance of rubber seals during high-pressure hydrogen filling process. International Journal of Hydrogen Energy.DOI
  36. Fan Wu, Jinbo Jiang, Xudong Peng, Liming Teng, Min‐Feng Yu (2025). Influence of natural gas composition and operating conditions on the phase change of dry gas seals for pipeline compressors. International Journal of Heat and Fluid Flow.DOI
  37. Mengjiao Wang, Mingbo Zhu, Xiangkai Meng, Xudong Peng (2025). Effects of Laser Bionic Textures and Diamond-like Carbon Coatings on Tribological Properties of CuAl10Fe5Ni5 Under Oil Lubrication. Coatings.DOI
  38. Bingqing Wang, Xi Yang, Bing Hou, Yuntang Li, Yuan Chen, Xudong Peng (2025). Performance analysis and structural optimization of VL-type hydraulic reciprocating seal in a deep-sea hydraulic system. Ocean Engineering.DOI
  39. Qingyuan Lu, Jinbo Jiang, Xiangkai Meng, Yuan Chen, Ma Yi, Xudong Peng (2025). Effect of the 3D layered flow channels within the rotating ring on the steady-state performance of dry gas seals. Tribology International.DOI
  40. Yuan Chen, Y.T. Li, Yuntang Li, Yongjian Pan, Xiaolu Li, Bingqing Wang, Xudong Peng (2025). Leakage control design and performance analysis on upstream pumping compliant foil face gas seal. Industrial Lubrication and Tribology.DOI
  41. Ma Yi, Lvwen Wu, Chuanming Li, Xiangkai Meng, Xudong Peng, Jinbo Jiang (2025). Thermal-mechanical-diffusion multi-field coupling behavior of rubber seals in high-pressure hydrogen environment. International Journal of Hydrogen Energy.DOI
  42. Xiaoxuan Li, Xiaoxuan Li, Bingqing Wang, Bingqing Wang, Yuntang Li, Yuntang Li, Xudong Peng, Yuan Chen, Xiaolu Li, Xiaolu Li (2025). Multi-Objective Structural Optimization of Hydraulically Controllable Reciprocating Seals With Comprehensive Static and Dynamic Performance. Journal of Tribology.DOI
  43. Ma Yi, Lei Chen, Yijia Xu, Xiangkai Meng, Xudong Peng (2025). Numerical study on contact characteristics and sealing performance of rubber-bellows mechanical seals in ESPs. Industrial Lubrication and Tribology.DOI
  44. Yuan Chen, Aoxiang Jiang, Yuntang Li, Xiaolu Li, Bingqing Wang, Jinbo Jiang, Xudong Peng (2025). Transient Performance Study of Compliant Foil Cylindrical Gas Film Seal With Supercritical Carbon Dioxide. Journal of Tribology.DOI
  45. Zhengxuan Hou, Xiangkai Meng, Wenjing Zhao, Mengjiao Wang, Xudong Peng (2025). Inertia and phase change effects on hydrodynamic-hydrostatic mechanical seals under cryogenic conditions. Tribology International.DOI
  46. Zhengxuan Hou, Xiangkai Meng, Wenjing Zhao, Mengjiao Wang, Xudong Peng (2025). Study on LOX phase change characteristics of T-grooved mechanical face seals. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  47. Chirun Zhuo, Jinbo Jiang, Xudong Peng, Xiangkai Meng, Ma Yi (2025). A Method for Measuring Film Pressure on the Whole Surface of Gas-Lubricated Grooved Face Seals or Bearings under Zero Shaft Speed Conditions. Tribology Transactions.DOI
  48. Xueping Li, Xiangkai Meng, Yangyang Liang, Jinbo Jiang, Xudong Peng (2025). Mass transfer of a hybrid porous T-groove mechanical face seal under Elasto-hydrodynamic model. Heat and Mass Transfer.DOI
  49. Mengjiao Wang, Ao Wang, Xiangkai Meng, Xudong Peng, Jinqing Wang (2025). Effect of interlayer bonding and stacking structure on the tribological properties of graphene oxide coatings. Tribology International.DOI
  50. Duo Xu, Zhong-Jin Ni, Xuan Zhang, Hao-Ran Fan, Jin-Bo Jiang, Xudong Peng, Hao-Xuan Hu (2025). Effect of seal clearance on leakage and dynamic characteristics of hole-pattern damping seals. Industrial Lubrication and Tribology.DOI
  51. 江澳翔,陈源,李运堂,江锦波,彭旭东,章聪,王冰清(2024). 微间隙高速流体效应对箔片柱面气膜密封性能的影响. 《化工学报》.
  52. 柴杨洋,彭旭东,江锦波,孟祥铠,马艺(2024). 浸锑石墨与无压烧结SiC和3D打印SiC密封材料配对副的摩擦磨损特性研究. 《化工学报》.
  53. 孟祥铠,肖远航,赵文静,江锦波,彭旭东(2024). 涡轮泵用动静压型机械密封性能数值分析. 《航空动力学报》.
  54. 潘振威,江锦波,彭旭东,孟祥铠,马艺,赵文静(2024). 轴向叠层回流泵送槽干气密封泄漏特性及其参数影响研究. 《摩擦学学报(中英文)》.
  55. 翁文豪,胡航领,江锦波,彭旭东,林志民,王林涛,孟祥铠(2024). 高压干气密封三体双向流固耦合模型及端面力变形规律研究. 《摩擦学学报(中英文)》.
  56. 李晓暄,王冰清,彭旭东,李运堂,李孝禄,陈源,金杰(2024). 丁腈橡胶硬度对O形液压杆封密封性能的影响(英文). Journal of Zhejiang University-Science A.
  57. 尹佳乐,孟祥铠,赵文静,江锦波,彭旭东(2024). 压电陶瓷可控机械密封多场耦合模型与调控性能分析. 《润滑与密封》.
  58. Min‐Feng Yu, Xudong Peng, Xiangkai Meng, Jinbo Jiang, Ma Yi, Fan Wu (2024). The research for the recommended flush flow of high-speed mechanical seal with textured side-wall. International Journal of Heat and Fluid Flow.DOI
  59. Long Chen, Yuan Chen, Yuntang Li, Xudong Peng, Xiaolu Li, Dan Wang, Bingqing Wang (2024). Thermal-Gas-Elastic Coupling Modeling and Performance Analysis of Foil Cylindrical gas Film Seal Considering Speed Slip, Temperature Jump and Shaft Misalignment. Journal of Tribology.DOI
  60. Mengli Zhang, Jinbo Jiang, Jun Hong, Yongli Xu, Xiangkai Meng, Xudong Peng (2024). Non-uniform flow and heat transfer characteristics and parametric study of generator hydrogen double-flow ring seal. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  61. Mengjiao Wang, Mingbo Zhu, Xinzheng Hu, Kun Liu, Xuefeng Fan, Xiangkai Meng, Xudong Peng, Jinqing Wang (2024). Synergistic Effect of Elliptic Textures and H-DLC Coatings for Enhancing the Tribological Performance of CuAl10Fe5Ni5 Valve Plate Surfaces. Coatings.DOI
  62. Xuan Zhang, Duo Xu, Jinbo Jiang, Xudong Peng, Canlong Li, Zhongjin Ni, Chunyu Wen (2024). The leakage and rotordynamic performance of the novel bulkhead-tooth labyrinth seal. Tribology International.DOI
  63. Xuan Zhang, Jinbo Jiang, Xudong Peng, Zhongjin Ni, Jun Pan (2024). A comparative study on rotordynamics characteristics of hole-pattern damping seals with different cavity shapes. Industrial Lubrication and Tribology.DOI
  64. Xuan Zhang, Jinbo Jiang, Xudong Peng, Zhongjin Ni, Jun Pan, Kang Yu, Yan Lu (2024). Influence of operating parameters and cavity geometry on rotor dynamic characteristics of hole-pattern damping seal with dovetail-like diversion grooves. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  65. Fan Wu, Jinbo Jiang, Xudong Peng, Liming Teng, Xiangkai Meng, Jiyun Li (2024). Influence of Natural Gas Composition and Operating Conditions on the Steady-State Performance of Dry Gas Seals for Pipeline Compressors. Lubricants.DOI
  66. Min‐Feng Yu, Xudong Peng, Xiangkai Meng, Jinbo Jiang, Ma Yi (2024). The influence of cooling medium and cooling channel on heat transfer of textured seal in presence of viscous dissipation. International Journal of Heat and Fluid Flow.DOI
  67. Ma Yi, Ziang Li, Ziyang Yuan, Xiangkai Meng, Xudong Peng, Jinbo Jiang (2024). Multi-Field Coupling Numerical Analysis and Experimental Validation of Surface-Textured Metal Seals in Roller Cone Bits. Lubricants.DOI
  68. Xiaoxuan Li, Bingqing Wang, Xudong Peng, Yuntang Li, Xiaolu Li, Yuan Chen, Jie Jin (2024). Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals. Journal of Zhejiang University. Science A.DOI
  69. Bingqing Wang, Xiaoxuan Li, Yuntang Li, Xudong Peng, Yuan Chen, Xiaolu Li (2024). Leakage Control Mechanisms and Strategies for Hydraulically Driven Controllable Rod Seals. Journal of Tribology.DOI
  70. Liming Teng, Jinbo Jiang, Xudong Peng, Fan Wu, Wenjing Zhao (2024). Influence of separation, collision and friction of rotating ring in sleeve on vibration characteristics of gas face seals. Industrial Lubrication and Tribology.DOI
  71. Ma Yi, Xi Jiang Wu, Xiaoling Deng, Xudong Peng, Xiangkai Meng (2024). Mechanical and diffusion property and multi-objective optimization of rubber seals exposed to high-pressure hydrogen gas. Science Progress.DOI
  72. Xueping Li, Xiangkai Meng, Wenjing Zhao, Xudong Peng (2024). Numerical investigation on a hybrid Porous-Spiral Groove Mechanical Face Seal. Tribology International.DOI
  73. Liming Teng, Jinbo Jiang, Xudong Peng, Fan Wu, Wenjing Zhao, Jiyun Li (2024). Investigation on transient response of gas face seals based on a double mass kinematic model considering Coulomb friction. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  74. 许文烜,江锦波,彭新,门日秀,刘畅,彭旭东(2023). 宽速域三种典型型槽油气密封泄漏与成膜特性对比研究. 《化工学报》.
  75. 江锦波,彭新,许文烜,门日秀,刘畅,彭旭东(2023). 泵出型螺旋槽油气密封泄漏特性及参数影响研究. 《化工学报》.
  76. 谢玉汉,孟祥铠,赵文静,王禹衡,洪先志,彭旭东(2023). 高压工况上游泵送机械密封热力变形与密封性能分析. 《化工学报》.
  77. 江锦波,江鹏,彭旭东,彭建,洪先志,唐大全(2023). 超临界二氧化碳动静压干气密封稳态性能和加热模式对比研究. 《热力发电》.
  78. 张敏佳,马艺,孟祥铠,彭旭东,王玉明(2023). 单金属密封间隙两相流动及密封性能研究. 《摩擦学学报(中英文)》.DOI
  79. Mengjiao Wang, Ao Wang, Ao Wang, Ao Wang, Wenjing Zhao, Xiangkai Meng, Xudong Peng, Jinqing Wang (2023). The ion diffusion-directed self-assembled graphene oxide coating and its synergistic lubrication mechanism against environmental moisture. Tribology International.DOI
  80. Wenjing Zhao, Simin Zheng, Liming Teng, Jinbo Jiang, Mengjiao Wang, Xudong Peng (2023). Deformation Characteristics of Mechanical Seal Face under Alternating Loads. Applied Sciences.DOI
  81. Min‐Feng Yu, Xudong Peng, Xiangkai Meng, Jinbo Jiang, Ma Yi (2023). Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall. Lubricants.DOI
  82. Bingqing Wang, Xiaoxuan Li, Xudong Peng, Yuntang Li, Xiang Li, Yuan Chen, Jie Jin (2023). Influence of Nitrile Butadiene Rubber (NBR) Shore Hardness and Polytetrafluoroethylene (PTFE) Elastic Modulus on the Sealing Characteristics of Step Rod Seals. Lubricants.DOI
  83. Bingqing Wang, Xiaoxuan Li, Xudong Peng, Yuntang Li, Yuan Chen, Jie Jin (2023). Thermoelastohydrodynamic Mixed Lubrication of Combined Rod Seals Operating at High Pressures and Speeds: Mathematical Modeling and Numerical Analysis. Journal of Tribology.DOI
  84. Yuan Chen, Kai Chen, Xudong Peng, Yuntang Li, Xiaolu Li, Bingqing Wang, Jie Jin (2023). Transient elasto-aerodynamically coupling behavior and performance analysis of bump-type compliant foil face gas seal at ultra-high speeds. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  85. Xuan Zhang, Jin-Bo Jiang, Xudong Peng, Zhong-Jin Ni (2023). Experimental and numerical simulation study on the influence of structural factors on the leakage characteristics of clearance seals. Flow Measurement and Instrumentation.DOI
  86. 赵文静,屠治荣,孟祥铠,江锦波,彭旭东(2022). 非规则V形表面织构化机械端面密封性能研究. 《化工学报》.
  87. 孟祥铠,孟令超,马艺,江锦波,彭旭东(2022). 多孔质机械密封耦合润滑模型与密封性能分析. 《化工学报》.
  88. Ma Yi, Yixiao Xu, Yutao Chen, Xiangkai Meng, Xudong Peng (2022). Dynamic Characteristics of Metal Seals in Roller Cone Bits. Lubricants.DOI
  89. Liming Teng, Jinbo Jiang, Xudong Peng, Jiyun Li (2022). Influence of surface grooving methods on steady and dynamic performance of spiral groove gas face seals. Alexandria Engineering Journal.DOI
  90. Haonan Cai, Jinbo Jiang, Xiangkai Meng, Ma Yi, Jiyun Li, Xudong Peng (2022). Fluid-structure coupling model and output characteristics of a diaphragm-type restrictor. Advances in Mechanical Engineering.DOI
  91. Yuan Chen, Qinggang Wang, Xudong Peng, Yuntang Li, Bingqing Wang, Jie Jin (2022). Flow field and sealing performance analysis of compliant foil face gas seal. Advances in Mechanical Engineering.DOI
  92. Cong Zhang, Jinbo Jiang, Wenjing Zhao, Jie Jin, Xudong Peng (2022). A comprehensive multi-objective, multi-parameter and multi-condition optimization of a spiral groove in dry gas seals. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  93. Liming Teng, Jinbo Jiang, Xudong Peng, Jiyun Li, Simin Zheng (2022). Study on Angular Free Vibration Stability and Parameters Influence of Dry Gas Seal Based on the Characteristic Equation. Shock and Vibration.DOI
  94. Xiangkai Meng, Zhirong Tu, Ma Yi, Jinbo Jiang, Xudong Peng (2022). Topology optimization of liquid lubricating zero-leakage mechanical face seals. Tribology International.DOI
  95. Hao Shang, Yuan Chen, Xiaolu Li, Yuntang Li, Bingqing Wang, Xudong Peng (2022). Investigation of performance and parametric optimization of the typical spiral groove dry gas seal under transient disturbance operating condition. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  96. Yuan Chen, Xudong Peng, Bingqing Wang, Jinbo Jiang, Jiyun Li (2022). Experimental and theoretical investigations on dry gas seal transient performance and its disparity with steady performance. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  97. Jie Jin, Xudong Peng, Xiangkai Meng, Wenjing Zhao, Jinbo Jiang (2022). Effect of phase change on sealing performance parameters and surface topography of a spiral groove mechanical seal. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  98. Jie Jin, Xudong Peng, Yuntang Li, Xiaolu Li, Yuan Chen, Bingqing Wang (2022). Comparison and analysis of the performance of a spiral groove mechanical seal subjected to phase change with different sealing media. Applied Thermal Engineering.DOI
  99. Xuan Zhang, Jinbo Jiang, Xudong Peng, Cong Zhang, Jiyun Li (2022). A novel leakage behavior characterization model of hole pattern seal and its mechanism analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  100. Yuan Chen, Kai Chen, Xudong Peng, Bingqing Wang, Xiaolu Li, Jie Jin (2022). Research on the operation mechanism and performance of bump-type compliant foil face gas seal. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  101. Cong Zhang, Jinbo Jiang, Xudong Peng, Xuan Zhang (2022). An Investigation on Phase Transitions in a Supercritical CO2 Dry Gas Seal. Tribology Transactions.DOI
  102. Cong Zhang, Jinbo Jiang, Xudong Peng (2022). Numerical analysis of supercritical CO 2 dry gas seals with phase transitions. Industrial Lubrication and Tribology.DOI
  103. Jinbo Jiang, Xuan Zhang, Wenjing Zhao, Yi Ma, Xudong Peng (2022). Leakage Characteristics of a Novel Hole-Pattern Damping Seal With Dovetail-Like Diversion Grooves: Numerical Simulation and Experiment. Journal of Engineering for Gas Turbines and Power.DOI
  104. 江锦波,滕黎明,孟祥铠,李纪云,彭旭东(2021). 基于多变量摄动的超临界CO2干气密封动态特性. 《化工学报》.
  105. 商浩,陈源,李孝禄,王冰清,李运堂,彭旭东(2021). 膜厚扰动下的非线性效应对干气密封性能影响研究. 《化工学报》.
  106. 于辰,江锦波,赵文静,李纪云,彭旭东,王玉明(2021). 基于微段组合的干气密封端面型槽结构模型及其参数影响. 《化工学报》.
  107. 江鹏,江锦波,彭旭东,孟祥铠,马艺(2021). 传热模型对近临界工况CO2干气密封温压分布和稳态性能影响. 《化工学报》.
  108. Xiangkai Meng, Yujie Qiu, Ma Yi, Xudong Peng (2021). An investigation into the thermo-elasto-hydrodynamic effect of notched mechanical seals. Nuclear Engineering and Technology.DOI
  109. Yuan Chen, Hao Shang, Xiaolu Li, Yuntang Li, Bingqing Wang, Xudong Peng (2021). The influence of 3-DOF film thickness disturbance on transient performance of typical spiral groove dry gas seals. Industrial Lubrication and Tribology.DOI
  110. Ma Yi, Ziyang Yuan, Yang Ni, Xiangkai Meng, Xudong Peng (2021). Performance prediction and multi-objective optimization of metal seals in roller cone bits. Journal of Petroleum Science and Engineering.DOI
  111. Cong Zhang, Jinbo Jiang, Xudong Peng, Xiangkai Meng, Jiyun Li (2021). The influence and a direct judgement method of the flow state in supercritical CO2 dry gas seal. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  112. Jie Jin, Xudong Peng, Xiangkai Meng, Wenjing Zhao, Jinbo Jiang (2021). Analysis of stability of two-phase flow mechanical seal with spiral groove under high speeds. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  113. Xuan Zhang, Jinbo Jiang, Xudong Peng, Wenjing Zhao, Jiyun Li (2021). Leakage reduction by optimization of hole-pattern damping seal with inclined hole cavity. International Journal of Heat and Mass Transfer.DOI
  114. 车健,江锦波,李纪云,彭旭东,马艺,王玉明(2020). 节流孔出气模式对静压干气密封稳态性能影响. 《化工学报》.
  115. 马学忠,孟祥铠,张伟政,彭旭东,丁雪兴(2020). 反向瑞利台阶构型液膜空化性能与机械密封空化抽吸效应评价. 《化工学报》.
  116. Xuan Zhang, Jinbo Jiang, Xudong Peng, Jiyun Li (2020). Leakage and rotordynamic characteristics of labyrinth seal and hole-pattern damping seal with special-shaped 3D cavity. Industrial Lubrication and Tribology.DOI
  117. Yujie Qiu, Xiangkai Meng, Yangyang Liang, Xudong Peng (2020). Thermal mixing effect and heat transfer in U-shaped notch on the mechanical seal face. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  118. Bingqing Wang, Xiangkai Meng, Xudong Peng, Yuan Chen (2020). Experimental investigations on the effect of rod surface roughness on lubrication characteristics of a hydraulic O-ring seal. Tribology International.DOI
  119. Xuezhong Ma, Xiangkai Meng, Yuming Wang, Yangyang Liang, Xudong Peng (2020). Fluid Inertia Effect on Spiral-Grooved Mechanical Face Seals Considering Cavitation Effects. Tribology Transactions.DOI
  120. Jinbo Jiang, Wenjing Zhao, Xudong Peng, Jiyun Li (2020). A novel design for discrete surface texture on gas face seals based on a superposed groove model. Tribology International.DOI
  121. 倪成良,江锦波,彭旭东,孟祥铠,李纪云(2019). 浸酚醛树脂石墨与9Cr18不锈钢配副的摩擦磨损正交试验研究. 《流体机械》.
  122. 王文强,彭旭东,梁杨杨,李纪云(2019). 基于田口方法的中低压油封稳健性设计. 《流体机械》.
  123. 孟祥铠,江莹莹,赵文静,彭旭东(2019). 螺旋槽液膜密封热流体动力润滑性能分析. 《化工学报》.
  124. 徐奇超,江锦波,彭旭东,李纪云,王玉明(2019). 基于遗传算法的干气密封双向槽统一模型与参数优化. 《化工学报》.
  125. 陈源,江锦波,彭旭东,严天宏,李运堂,李孝禄,李纪云(2019). 干气密封力学系统动态性能及其影响因素间的交互作用分析. 《摩擦学学报(中英文)》.DOI
  126. 孟祥铠,江莹莹,赵文静,江锦波,彭旭东(2019). 考虑空化效应的螺旋槽机械密封液膜动力学特性研究. 《摩擦学学报(中英文)》.DOI
  127. 沈伟,彭旭东,江锦波,李纪云(2019). 高速超临界二氧化碳干气密封实际效应影响分析. 《化工学报》.
  128. Jie Jin, Xudong Peng, Jinbo Jiang, Xiangkai Meng, Wenjing Zhao (2019). Frictional characteristics of impregnated graphite with different graphitization degree versus chromium stainless steel under varying PV values. Tribology International.DOI
  129. Xiao Dong Yang, Xudong Peng, Xiangkai Meng, Jinbo Jiang, Yuming Wang (2019). Thermo-elasto-hydrodynamic analysis of triangular textured mechanical face seals. Journal of Zhejiang University. Science A.DOI
  130. Jinbo Jiang, Xudong Peng, Cong Zong, Wenjing Zhao, Yuan Chen, Jiyun Li (2019). Enhancing Film Stiffness of Spiral Groove Dry Gas Seal via Shape Modification at Low Speed: Numerical Results and Experiment. Tribology Transactions.DOI
  131. 金晚君,孟祥铠,梁杨杨,沈明学,彭旭东(2018). 旋转油封密封织构化界面的密封性能研究. 《流体机械》.
  132. 马学忠,孟祥铠,王玉明,赵文静,沈明学,彭旭东(2018). 机械端面密封反向螺旋槽空化效应与泄漏控制机理. 《化工学报》.
  133. 江锦波,陈源,赵文静,李纪云,彭旭东(2018). 干气密封螺旋槽几何参数优选交互影响. 《化工学报》.
  134. Xuezhong Ma, Xiangkai Meng, Yuming Wang, Xudong Peng (2018). Suction effect of cavitation in the reverse-spiral-grooved mechanical face seals. Tribology International.DOI
  135. Bingqing Wang, Xudong Peng, Xiangkai Meng (2018). Simulation of the effects of non-Newtonian fluid on the behavior of a step hydraulic rod seal based on a power law fluid model. Journal of Zhejiang University. Science A.DOI
  136. Bingqing Wang, Xudong Peng, Xiangkai Meng (2018). A thermo-elastohydrodynamic lubrication model for hydraulic rod O-ring seals under mixed lubrication conditions. Tribology International.DOI
  137. Yuan Chen, Xudong Peng, Jinbo Jiang, Xiangkai Meng, Jiyun Li (2018). Experimental and theoretical studies of the dynamic behavior of a spiral-groove dry gas seal at high-speeds. Tribology International.DOI
  138. Jinbo Jiang, Xudong Peng, Jiyun Li, Yuan Chen (2018). Leakage and Stiffness Characteristics of Bionic Cluster Spiral Groove Dry Gas Seal. Chinese Journal of Mechanical Engineering.DOI
  139. Xiangkai Meng, Wenjing Zhao, Mingxue Shen, Xudong Peng (2018). Thermohydrodynamic analysis on herringbone-grooved mechanical face seals with a quasi-3D model. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  140. 彭旭东,宗聪,江锦波(2017). 干气密封单向螺旋槽及其衍生结构功能演变进展. 《化工学报》.
  141. Mingxue Shen, Zhaoxiang Zhang, Xudong Peng, Xiuzhou Lin (2017). Microstructure evolution and tribological properties of acrylonitrile–butadiene rubber surface modified by atmospheric plasma treatment. Applied Physics A.DOI
  142. Yuan Chen, Jinbo Jiang, Xudong Peng (2017). Dynamic characteristics and transient sealing performance analysis of hyperelliptic curve groove dry gas seals. Tribology International.DOI
  143. 程香平,孟祥铠,彭旭东,张友亮,付远,康林萍(2016). 端面锥形参数对锥-孔组合型机械密封性能的影响. 《化工学报》.
  144. 沈明学,李文静,谢林君,励行根,魏世军,彭旭东(2016). 反应堆压力容器法兰面沟槽尺寸参数对其金属O形环密封性能的影响. 《原子能科学技术》.
  145. 王世宏,王冰清,彭旭东(2016). 高固含量催化剂泵用机械密封失效分析与改造. 《化工机械》.
  146. 李文静,沈明学,彭旭东,励行根,郑劲松,王玉明(2016). 弹簧结构参数对赋能型金属C形环力学行为及密封性能的影响. 《润滑与密封》.
  147. Dong Feng, Mingxue Shen, Xudong Peng, Xiangkai Meng (2016). Surface Roughness Effect on the Friction and Wear Behaviour of Acrylonitrile–Butadiene Rubber (NBR) Under Oil Lubrication. Tribology Letters.DOI
  148. Yuan Chen, Jinbo Jiang, Xudong Peng (2016). Gas film disturbance characteristics analysis of high-speed and high-pressure dry gas seal. Chinese Journal of Mechanical Engineering.DOI
  149. Mingxue Shen, Feng Dong, Zhaoxiang Zhang, Xiangkai Meng, Xudong Peng (2016). Effect of abrasive size on friction and wear characteristics of nitrile butadiene rubber (NBR) in two-body abrasion. Tribology International.DOI
  150. Chunhong Ma, Shaoxian Bai, Xudong Peng (2016). Thermoelastohydrodynamic characteristics of T-grooves gas face seals. International Journal of Heat and Mass Transfer.DOI
  151. B C Gao, Xiangkai Meng, Mingxue Shen, Xudong Peng (2016). Transient thermal-mechanical coupling behavior analysis of mechanical seals during start-up operation. IOP Conference Series Materials Science and Engineering.DOI
  152. Jinbo Jiang, Xudong Peng, Jiyun Li, Yuan Chen (2016). A comparative study on the performance of typical types of bionic groove dry gas seal based on bird wing. Journal of Bionic Engineering.DOI
  153. Mingxue Shen, Zhenbing Cai, Jinfang Peng, Xudong Peng, Min-hao Zhu (2016). Antiwear Properties of Bonded MoS2 Solid Lubricant Coating under Dual-Rotary Fretting Conditions. Tribology Transactions.DOI
  154. Yuan Chen, Jing-B. Jiang, Xudong Peng(2016). 高速・高圧ドライガスシールのガス膜外乱特性解析【Powered by NICT】.
  155. 沈明学,郑金鹏,孟祥铠,厉淦,江华生,彭旭东(2015). 往复轴封氟橡胶O型圈微动摩擦学特性. 《机械工程学报》.
  156. 江锦波,彭旭东,白少先,李纪云(2015). 仿生集束螺旋槽干式气体密封特性的数值分析. 《机械工程学报》.
  157. 沈明学,谢林君,赵丽娜,励行根,王燕,彭旭东(2015). 反应堆压力容器用Inconel 718合金O形环密封性能. 《上海交通大学学报》.
  158. 楼建铭,孟祥铠,李纪云,彭旭东(2015). 波度端面机械密封温度场的有限元分析. 《流体机械》.
  159. 宫晓清,孟祥铠,李纪云,彭旭东(2015). 核主泵用流体动压型机械密封温度场的数值研究. 《流体机械》.
  160. 江华生,孟祥铠,沈明学,彭旭东(2015). 唇形密封轴表面方向性微孔的润滑特性. 《化工学报》.
  161. 励行根,沈明学,王成林,魏世军,励洁,彭旭东(2015). 柔性石墨金属波纹复合增强垫片密封性能试验. 《化工学报》.
  162. Mingxue Shen, Xudong Peng, Linjun Xie, Xiangkai Meng, LI Xing-gen (2015). Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel. Nuclear Engineering and Technology.DOI
  163. Mingxue Shen, Xudong Peng, Xiangkai Meng, Jin-peng Zheng, Min-hao Zhu (2015). Fretting wear behavior of acrylonitrile–butadiene rubber (NBR) for mechanical seal applications. Tribology International.DOI
  164. Mingxue Shen, Jin-peng Zheng, Xiangkai Meng, Xiao Li, Xudong Peng (2015). Influence of Al2O3 particles on the friction and wear behaviors of nitrile rubber against 316L stainless steel. Journal of Zhejiang University. Science A.DOI
  165. Chunhong Ma, Shaoxian Bai, Xudong Peng (2015). Thermo-hydrodynamic characteristics of spiral groove gas face seals operating at low pressure. Tribology International.DOI
  166. Mingxue Shen, Zhenbing Cai, Zhou Yan, Xudong Peng, Min-hao Zhu (2015). Characterization of friction-induced local convex topography under dual-rotary fretting. Tribology International.DOI
  167. 彭旭东,江锦波,白少先,李纪云,王玉明(2014). 中低压干气密封螺旋槽结构参数优化. 《化工学报》.
  168. 包超英,孟祥铠,李纪云,彭旭东(2014). 基于渗流原理的液体润滑机械密封的泄漏率研究. 《流体机械》.
  169. 佘宝瑛,彭旭东,孟祥铠,李纪云(2014). 不同形状方向性型孔液体润滑端面密封性能对比. 《化工学报》.
  170. 程香平,孟祥铠,彭旭东(2014). 大菱形孔端面密封力变形及密封性能分析. 《化工学报》.
  171. Jing Lei Xu, Xudong Peng, Shaoxian Bai, Xiangkai Meng, Jiyun Li (2014). Experiment on wear behavior of high pressure gas seal faces. Chinese Journal of Mechanical Engineering.DOI
  172. Chunhong Ma, Shaoxian Bai, Xudong Peng, Yonggang Meng (2014). Transient spreading of water droplet on laser micro-structured SiC surfaces. Applied Surface Science.DOI
  173. Xiangkai Meng, Shaoxian Bai, Xudong Peng (2014). Lubrication film flow control by oriented dimples for liquid lubricated mechanical seals. Tribology International.DOI
  174. Xiangkai Meng, Shaoxian Bai, Xudong Peng (2014). An efficient adaptive finite element method algorithm with mass conservation for analysis of liquid face seals. Journal of Zhejiang University. Science A.DOI
  175. Xudong Peng (2014). Correlational Research of Bionics Design of Dry Gas Face Seal Groove. Journal of Mechanical Engineering.DOI
  176. Shaoxian Bai, Chunhong Ma, Xudong Peng, Shizhu Wen (2014). Thermoelastohydrodynamic Behavior of Gas Spiral Groove Face Seals Operating at High Pressure and Speed. Journal of Tribology.DOI
  177. 刘杰,李鲲,吴兆山,李香,彭旭东(2013). 镶嵌式直线深槽流体动压型机械密封性能研究. 《流体机械》.
  178. 彭旭东,刘坤,白少先,李纪云,盛颂恩(2013). 典型螺旋槽端面干式气体密封动压开启性能. 《化工学报》.
  179. 许静,彭旭东,白少先,李纪云,王玉明(2013). 端面微尺度效应和热黏效应对干气密封性能的影响. 《化工学报》.
  180. 唐飞翔,孟祥铠,李纪云,彭旭东(2013). 基于质量守恒的LaserFace液体润滑机械密封数值分析. 《化工学报》.
  181. 许静,彭旭东,白少先,李纪云(2013). 机械密封的扭转变形计算方法与影响因素. 《化工学报》.
  182. 彭旭东,张风云,白少先,李纪云(2013). 仿鸟翼型双流通槽干气密封静压特性模拟. 《排灌机械工程学报》.
  183. 刘坤,白少先,李纪云,盛颂恩,彭旭东(2013). 径向变深雁形槽干气密封开启性能研究. 《流体机械》.
  184. Chunhong Ma, Shaoxian Bai, Yonggang Meng, Xudong Peng (2013). Hydrophilic control of laser micro-square-convexes SiC surfaces. Materials Letters.DOI
  185. Chunhong Ma, Shaoxian Bai, Xudong Peng, Yonggang Meng (2013). Anisotropic wettability of laser micro-grooved SiC surfaces. Applied Surface Science.DOI
  186. Xudong Peng (2013). Study on Opening Characteristics of Dry Gas Seals with Radial Tapered Goose Grooves. Fluid Machinery.
  187. 马媛媛,彭旭东,白少先,孟祥铠,古通生(2012). 双向旋转树型槽密封端面气膜动压特性. 《流体机械》.
  188. 彭旭东,康玉茹,孟祥铠,白少先,盛颂恩(2012). 核主泵用流体静压型机械密封性能的影响因素研究. 《机械工程学报》.
  189. 彭旭东,张岳林,白少先,李纪云,盛颂恩(2012). 转速压力对T型槽干气密封槽型几何结构参数优选值的影响. 《化工学报》.
  190. Chunhong Ma, Shaoxian Bai, Xudong Peng, Yonggang Meng (2012). Improving hydrophobicity of laser textured SiC surface with micro-square convexes. Applied Surface Science.DOI
  191. Shaoxian Bai, Xudong Peng, Linqing Bai (2012). Experimental Investigation of an Inclined Ellipse Dimpled Gas Face Seal. Tribology Transactions.DOI
  192. Xin Liu, Xudong Peng, Xiangkai Meng (2012). Thermo-Elasto-Hydrostatic Effect Analysis of the Double Tapered Hydrostatic Mechanical Seals for Reactor Coolant Pumps under the Influence of Flow Regime. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
  193. Shaoxian Bai, Xudong Peng, Yefeng Li, Song-En Sheng (2012). Gas Lubrication Analysis Method of Step-Dimpled Face Mechanical Seals. Journal of Tribology.DOI
  194. Shaoxian Bai, Xudong Peng, Yonggang Meng, Shizhu Wen (2012). Modeling of Gas Thermal Effect Based on Energy Equipartition Principle. Tribology Transactions.DOI
  195. Xudong Peng, Huyan Chenlong, Shaoxian Bai, Jiyun Li, Sheng Song-en (2012). Design of a Biomorphic Groove Dry Gas Seal Based on Bird Wing Outlines. Tribology.
  196. 彭旭东,刘鑫,孟祥铠,李纪云,盛颂恩(2011). 疏水表面的自密封性对机械密封性能的影响. 《化工学报》.
  197. 孟祥铠,彭旭东,王乐勤(2011). 瞬态启停机械密封轴对称动力学模型与密封行为分析. 《化工学报》.
  198. 彭旭东,刘鑫,孟祥铠,白少先,盛颂恩(2011). 锥面-微孔组合端面机械密封性能. 《化工学报》.
  199. 康玉茹,孟祥铠,彭旭东,李纪云,盛颂恩(2011). 核主泵用流体静压型机械密封耦合模型与性能分析. 《流体机械》.
  200. Wei Liu, Ying Liu, Yuming Wang, Xudong Peng (2011). Parametric Study on a Wavy-Tilt-Dam Mechanical Face Seal in Reactor Coolant Pumps. Tribology Transactions.DOI
  201. Shaoxian Bai, Xudong Peng, Jiyun Li, Xiangkai Meng (2011). Experimental study on hydrodynamic effect of orientation micro-pored surfaces. Science China Technological Sciences.DOI
  202. Xudong Peng (2011). Fluid-solid coupling of a hydrodynamic mechanical seal with a wavy face. Journal of Tsinghua University(Science and Technology).
  203. Xudong Peng (2011). Study on Performance of a Liquid Lubricated LaserFace Seal. Fluid Machinery.
  204. 方艳峰,彭旭东,孟祥铠,白少先,盛颂恩(2010). 热冲击对流体静压型机械密封性能影响的研究. 《流体机械》.
  205. 黄莉,彭旭东,白少先,李纪云,盛颂恩(2010). 不同型槽端面干气密封的性能对比研究. 《流体机械》.
  206. 彭旭东,吴朝辉,孟祥铠,卢碎榜(2010). 多孔扇形分布端面机械密封的结构优化. 《排灌机械工程学报》.
  207. 彭旭东,黄莉,白少先,李纪云,古通生(2010). 雁型槽干式气体端面密封性能的数值分析. 《化工学报》.
  208. 刘鑫,彭旭东,孟祥铠,钟伟明,古通生(2010). 斜排微孔端面机械密封富集效应的理论研究. 《化工学报》.
  209. Shaoxian Bai, Xudong Peng, Yefeng Li, Song-En Sheng (2010). A Hydrodynamic Laser Surface-Textured Gas Mechanical Face Seal. Tribology Letters.DOI
  210. 赵中,彭旭东,盛颂恩,白少先,李纪云(2009). 多孔扇形分布端面机械密封性能的数值分析. 《化工学报》.
  211. 白少先,彭旭东,孟永钢,温诗铸(2009). 磁头/硬盘超薄膜气体润滑动态性能分析. 《应用力学学报》.
  212. Shaoxian Bai, Xudong Peng, Yonggang Meng, Shizhu Wen (2009). Pseudo-Nine-Point Finite Difference Method for Numerical Analysis of Lubrication. Journal of Tribology.DOI
  213. Xudong Peng, Lili Tan, Jiyun Li, Song-En Sheng, Shaoxian Bai (2008). Numerical Analysis of Dry Gas Face Seals With Spiral Groove and Inner Annular Groove. 2008 Second International Conference on Integration and Commercialization of Micro and Nanosystems.DOI
  214. Xudong Peng, Song-En Sheng, Jiyun Li, Yong-Ning Cai, Shaoxian Bai (2008). Study on Deformation of a Laser Surface Textured Mechanical Seal. 2008 Second International Conference on Integration and Commercialization of Micro and Nanosystems.DOI
  215. 潘晓梅,蔡永宁,骆建国,胡滨,彭旭东(2007). 激光加工多孔端面机械密封静压分析. 《流体机械》.
  216. 李纪云,曾群锋,彭旭东(2007). 均匀设计法在聚醚醚酮复合材料摩擦学特性试验中的应用研究. 《润滑与密封》.
  217. Xudong Peng, Jiyun Li, Qunfeng Zeng (2007). Study on the Friction and Wear Behavior of PEEK Composites Filled With Nanometer Compounds and PTFE. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
  218. Xudong Peng, Song-En Sheng, Xiao-ni Yin, Jiyun Li (2007). Effects of Surface Roughness and Slip Flow on the Performance of a Spiral Groove Gas Face Seal. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
  219. 曾群锋,彭旭东,李纪云(2006). 纳米氧化硅粒子和聚四氟乙烯填充聚醚醚酮复合材料的摩擦学特性研究. 《2006全国摩擦学学术会议论文集(一)》.
  220. 杜东波,骆建国,胡滨,彭旭东(2006). 激光加工多孔端面机械密封的理论研究. 《流体机械》.
  221. Xudong Peng, Y. B. Xie, Yunqing Gu (2006). Simpler method for volatile medium pump mechanical seals. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  222. 杜东波,彭旭东(2005). 熔体泵用螺旋密封的优化模型与优化计算. 《流体机械》.
  223. 彭旭东,曾群锋(2005). 聚醚醚酮基复合材料的热性质和物理性质预测及其摩擦销三维温度场的数值模拟. 《摩擦学学报(中英文)》.
  224. 彭旭东,曾群锋,马红玉,雷毅(2005). 纳米粒子及PTFE填充PEEK复合材料摩擦特性的载荷和时间依赖性. 《润滑与密封》.
  225. 彭旭东,马红玉,雷毅(2004). 纳米Al2O3和聚四氟乙烯填充聚醚醚酮基复合材料摩擦学特性研究. 《中国石油大学学报(自然科学版)》.
  226. 彭旭东,马红玉,曾群峰,雷毅(2004). 无机纳米微粒及聚四氟乙烯填充聚醚醚酮复合材料的摩擦学性能. 《摩擦学学报(中英文)》.
  227. 雷毅,彭旭东,张雁翔,郭建良(2004). 基于超高分子量聚乙烯及其复合材料摩擦学研究进展. 《化工进展》.
  228. 窦存金,彭旭东,刘立成,刘训刚(2004). 熔体泵轴封的故障分析和改造. 《化工机械》.
  229. 马红玉,彭旭东(2003). 气体压缩机高聚物摩擦部件的温升研究. 《流体机械》.
  230. 彭旭东,雷毅,马红玉(2002). 聚醚醚酮基复合材料的摩擦学研究进展. 《中国石油大学学报(自然科学版)》.
  231. 彭旭东,刘淑琴,谢友柏(1998). 机械密封监控技术的研究. 《流体机械》.
  232. 彭旭东,谢友柏,顾永泉,陈逊(1997). 热流体动力楔机械密封性能参数的近似计算. 《流体机械》.
  233. 彭旭东,谢友柏,顾永泉(1996). 机械密封端面温度的确定. 《化工机械》.
  234. 彭旭东(1990). 机械端面密封动力学的发展概况. 《中国石油大学学报(自然科学版)》.

预印本

  1. Jiang Tao, Jinbo Jiang, Yubo He, Xiangkai Meng, Yang Chunyang, Xudong PENG (2026). Study on the Tribological Characteristics and Wear-Mitigation Strategies of Anti-Rotation Pin Slot in Contact-Type Graphite Circumferential Seals. SSRN Electronic Journal.DOI
  2. Zhentao Yu, Jinbo Jiang, Xuan Zhang, Mengli Zhang, Xiangkai Meng, Canlong Li, Xudong Peng (2024). Comparative Study on the Leakage Characteristics and Parameter Influence of Bio-Inspired Fishway Staggered Labyrinth Seals. SSRN Electronic Journal.DOI

此主页由公开资料整理,尚未经学者本人认领。