李秀青｜河南科技大学｜学者主页

2026

自生碳化物混杂增强Fe-C复合材料的组织及性能

宋延沛，陈丹萍，周汉，林小丽，李秀青，黄晓冬

《材料热处理学报》

2026

Microstructure and properties of Cu-W-CeO2 alloys with different contents of CeO2 and relevant strengthening mechanism

Longwei Zhou, Xiuqing Li, Qingxia Yang, Zengye Ning, Dan Jia, Huijie Liu

Ceramics International

DOI

2026

Influence of Co element content on the microstructure and electrical contact performance under vacuum environment of Cu-Co-W alloy

Xiuqing Li, Zengye Ning, Qingxia Yang, Shizhong Wei, Liujie Xu

Journal of Alloys and Compounds

DOI

2026

Effect of tungsten content on microstructure, friction and wear behavior of copper-tungsten alloys

Yaju Zhou, Jingyi Zhou, Jianglei Fan, Shen Wu, Feilong Gong, Dongyao Wang, Xiuqing Li, Q. Chen, Shizhong Wei

Materials Characterization

DOI

2026

Overcoming strength-ductility-conductivity trade-off in Cu-W immiscible alloys by yttrium-modulated tungsten nano-dispersion

Yaju Zhou, Xiaolong Liu, Shen Wu, Jianglei Fan, Jianfeng Qu, Xiang Lei, Xiuqing Li, Shizhong Wei

Journal of Rare Earths

DOI

2025

消失模铸造液态金属充型能力测试方法研究

张杰琼，李锋军，何帅伟，轩世成，常云朋，李秀青

《金属加工(热加工)》

2025

消失模铸造工艺研究现状及展望

李秀青，杨晴霞，宁增业，李锋军，常云朋，张杰琼，何帅伟

《铸造技术》

DOI

2025

Influence of Mo Content on the Microstructure and Mechanical Properties of Cu-Mo Composites Fabricated by Mechanical Alloying and Spark Plasma Sintering

Jieyun Wu, Xiuqing Li, Qingxia Yang

Coatings

DOI

2025

Friction and wear properties of B4C-graphene composite ceramics sliding against TC4 titanium alloy

Xinyu Zhang, Xiuqing Li, Qingxia Yang, Jieyun Wu, Zengye Ning, Haiyang Pei, Huijie Liu, Dan Jia, Longwei Zhou

Ceramics International

DOI

2025

Microstructure and performance of Cu-Ta-W alloy with the variation of Ta content and correlative mechanism

Xiuqing Li, Zengye Ning, Qingxia Yang, Shizhong Wei, Liujie Xu

Materials Science and Engineering A

DOI

2025

Effect of Cr content on microstructure and properties of Cu-Cr-W alloy based on theoretical and experimental analysis

Zengye Ning, Xiuqing Li, Qingxia Yang, Jingkun Liang, Tianyao Guo, Jieyun Wu, Huijie Liu, Dan Jia, Longwei Zhou

Journal of Alloys and Compounds

DOI

2025

Microstructure and dynamic compression behavior of Cu-Cr-W alloy under different impact rates

Zengye Ning, Xiuqing Li, Qingxia Yang, Jieyun Wu, Tianyao Guo, Xinyu Zhang, Lewei Lu, Haiyang Pei, Huijie Liu, Dan Jia, Longwei Zhou

Materials Science and Engineering A

DOI

2025

Effect of W particle size on microstructure and mechanical properties of Cu-10W composites prepared by spark plasma sintering

Jingkun Liang, Xiuqing Li, Zengye Ning, Xinyu Zhang, Jieyun Wu, Haiyang Pei

Journal of Alloys and Compounds

DOI

2025

Experimental and theoretical research on the effect of Co addition on microstructure and properties of Cu-W alloy

Zengye Ning, Xiuqing Li, Qingxia Yang, Jingkun Liang, Tianyao Guo, Jieyun Wu, Xinyu Zhang, Haiyang Pei, Liangdong Chen

Materials Science and Engineering A

DOI

2025

Tribological Performance of B 4 C‐hBN/TC4 Titanium Alloy Pair in Seawater: Influence of Sliding Speed

Xiuqing Li, Liangdong Chen, Qingxia Yang, Xinyu Zhang, Liujie Xu

Advanced Engineering Materials

DOI

2025

Microstructure and property of Cu–Ti–W alloy taking into account the influence of Ti content

Haiyang Pei, Xiuqing Li, Yucheng Zhou, Zengye Ning, Qingxia Yang, Shizhong Wei, Liujie Xu

Journal of Materials Science

DOI

2025

Improvement the thermal stability and mechanical properties of ODS Cu alloy by forming composite oxide dispersion

Yaju Zhou, Jingyi Zhou, Weiwei Zhang, Jianglei Fan, Shen Wu, Xiuqing Li, Shizhong Wei

Materials Characterization

DOI

2025

Research on the dynamic compressive properties of Cu-Co-W alloys with different Co contents

Zengye Ning, Xiuqing Li, Qingxia Yang, Shizhong Wei, Jingkun Liang, Tianyao Guo, Jieyun Wu, Xinyu Zhang, Haiyang Pei, Liangdong Chen, Huijie Liu, Dan Jia, Longwei Zhou

Vacuum

DOI

2024

陶瓷颗粒增强镍基复合材料力学性能研究进展

杨丹，周玉成，徐流杰，李秀青

《特种铸造及有色合金》

2024

利用SRIM分析辐照对碳化物和氧化物陶瓷的影响（英文）

罗春阳，徐流杰，申华海，李秀青，魏世忠

《稀有金属材料与工程》

2024

W-Cu复合材料的应用现状及掺杂改性的研究进展

娄文鹏，李秀青，魏世忠，王琪，梁菁琨，陈良栋，徐流杰

《稀有金属与硬质合金》

2024

稀土复合添加剂在近净成形热锻模具钢中的作用研究

宋延沛，林小丽，陈丹萍，周汉，李秀青

《稀土》

2024

Frictional study of B4C-hBN multiphase ceramics and TC4 alloy tribological pair in synthetic seawater

Liangdong Chen, Xiuqing Li, Jingkun Liang, Xinyu Zhang, Zengye Ning, Jieyun Wu, Haiyang Pei, Qingxia Yang

Ceramics International

DOI

2024

Effect of Y2O3 content on the corrosion behavior of Cu-10W composites prepared by spark plasma sintering

Xiuqing Li, Wenpeng Lou, Shizhong Wei, Liujie Xu, Yucheng Zhou

Journal of Alloys and Compounds

DOI

2024

Effect of Y2O3 on high temperature thermal compression performance of Cu–10W composites and microstructure analysis

Wenpeng Lou, Xiuqing Li, Shizhong Wei, Jingkun Liang, Liangdong Chen, Zengye Ning, Xinyu Zhang, Jie Wu, Haiyang Pei, Liujie Xu, Jinshu Wang

Ceramics International

DOI

2024

Microstructure and characteristics of Cu-W composite prepared by W-coated Cu powder with different W contents

Xiuqing Li, Qi Wang, Shizhong Wei, Wenpeng Lou, Liujie Xu, Yucheng Zhou

Materials Science and Engineering A

DOI

2024

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

Zengye Ning, Xiuqing Li, Shizhong Wei, Jingkun Liang, Jieyun Wu, Xinyu Zhang, Haiyang Pei, Liujie Xu, Yucheng Zhou

Journal of Materials Science

DOI

2023

Microstructure and Texture of Pure Copper under Large Compression Deformation and Different Annealing Times

Xiuqing Li, Qian Zhang, Wenpeng Lou, Fengjun Li, Jianjun Liang, Shimin Gu

Coatings

DOI

2023

Simultaneous improvement of strength and plasticity of TZM alloys by introducing α-Al2O3 ceramic particles

Gaolong Tian, Liujie Xu, Hong Fang, Zhou Li, Xiuqing Li, Yuchen Zhou, Shizhong Wei

Ceramics International

DOI

2023

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Xiuqing Li, Qi Wang, Shizhong Wei, Wenpeng Lou, Jingkun Liang, Liangdong Chen, Liujie Xu, Yucheng Zhou

Journal of Alloys and Compounds

DOI

2023

Effect of nano-Y2O3 on the microstructure and mechanical properties of Cu-10W composites prepared by spark plasma sintering

Wenpeng Lou, Xiuqing Li, Shizhong Wei, Qi Wang, Jingkun Liang, Liangdong Chen, Liujie Xu, Yucheng Zhou

Ceramics International

DOI

2023

Deformation behavior and microstructure evolution of TZM alloy with 1.0 wt%ZrO2 under high temperature compression

Gaolong Tian, Liujie Xu, Hong Fang, Zhou Li, Xiuqing Li, Yuchen Zhou, Shizhong Wei

International Journal of Refractory Metals and Hard Materials

DOI

2023

EBSD Analysis of Hot Deformation Behavior of Oxide-Doped Molybdenum Alloys

Bin Wang, Yucheng Zhou, Liujie Xu, Dan Yang, Xiuqing Li, Shizhong Wei

Metals

DOI

2023

Mechanical properties and corrosion behavior in molten zinc of Mo–ZrO2 alloys

Bin Wang, Dan Yang, Yucheng Zhou, Liujie Xu, Yunpeng Li, Xiuqing Li, Shizhong Wei

Journal of Materials Research and Technology

DOI

2023

Tribological Properties of Cu-Based Self-Lubricating Materials Composed with Cu- or Ni-Plated Graphite

Yiran Wang, Liujie Xu, Xiuqing Li

Lubricants

DOI

2022

冷变形及退火对Ta-2.5W合金微观组织及力学性能的影响

张倩，李秀青，魏世忠，王琪，张程，徐流杰，周玉成

《稀有金属与硬质合金》

2022

B4C-SiC复合陶瓷的制备及其物理力学性能研究

陈威，郝文慧，高东强，李秀青

《中国材料进展》

2022

仿木年轮结构Si3N4/Ni复合材料微观组织及物理力学性能

陈威，朱朝龙，贾鑫，赵自强，李秀青

《硅酸盐学报》

2022

压缩变形及退火对纯铜组织及性能的影响

张倩，李秀青，魏世忠，王琪，娄文鹏，徐流杰

《河南科技大学学报(自然科学版)》

2022

Compressive properties and deformation behaviors of sintered W-m-ZrO2 alloy under different temperature

Yunchao Zhao, Liujie Xu, Mingyi Guo, Zhou Li, Xiuqing Li, Shizhong Wei

Materials Science and Engineering A

DOI

2022

Influence Evaluation of Tungsten Content on Microstructure and Properties of Cu-W Composite

Xiuqing Li, Minjie Zhang, Guoshang Zhang, Shizhong Wei, Qi Wang, Wenpeng Lou, Jingkun Liang, Liangdong Chen, Liujie Xu, Yucheng Zhou, Kunming Pan

Metals

DOI

2022

Phase and Microstructure Transition of High Cu Content Cu-W Composite Powder Fabricated by Spray Drying

Qi Wang, Xiuqing Li, Shizhong Wei, Wenpeng Lou, Liujie Xu, Yucheng Zhou

Metals

DOI

2022

Dynamic recrystallization behavior of a Mo-2.0%ZrO2 alloy during hot deformation

Zhaoning Xu, Liujie Xu, Ning Xiong, Yuan Yao, Xiuqing Li, Shizhong Wei

International Journal of Refractory Metals and Hard Materials

DOI

2022

Effect of spark plasma sintering temperature on structure and performance characteristics of Cu-20wt%W composite

Xiuqing Li, Minjie Zhang, Guoshang Zhang, Shizhong Wei, Liujie Xu, Yucheng Zhou

Journal of Alloys and Compounds

DOI

2022

Tribological behaviors of B 4 C–SiC composites self‐mated pairs in seawater and pure water

Wei Chen, Xuantong Liu, Wenhui Hao, Chaolong Zhu, Xiuqing Li

International Journal of Applied Ceramic Technology

DOI

2021

高温金属结构材料单晶制备及其研究进展

张晨阳，潘昆明，徐流杰，周玉成，李秀青，张桥保

《稀有金属》

DOI

2021

B4C质量分数对Cu-B4C复合材料组织和性能的影响

张敏杰，张国赏，李秀青，张倩，王琪，杨晴霞，魏骁，魏森森，张程，周玉成

《河南科技大学学报(自然科学版)》

DOI

2021

Research on the hot deformation behavior of Cu-20 wt%W composite under different temperatures

Xiuqing Li, Minjie Zhang, Guoshang Zhang, Qian Zhang, Qi Wang, Shizhong Wei, Liujie Xu, Yucheng Zhou

Materials Science and Engineering A

DOI

2021

Effect on Microstructure and Performance of B4C Content in B4C/Cu Composite

Dayu Shu, Xiuqing Li, Qingxia Yang

Metals

DOI

2021

Mechanical properties and tribological characteristics of B 4 C-SiC ceramic composite in artificial seawater

Wei Chen, Wenhui Hao, Ziqiang Zhao, Nairu He, Xiuqing Li, Huaqiang Li

Journal of Asian Ceramic Societies

DOI

2020

Establishment of processing map, microstructure and high-temperature tensile properties of W-0.25 wt% Al2O3 alloys

Changji Wang, Laiqi Zhang, Shizhong Wei, Xiuqing Li, Xiaochao Wu, Qingkui Li, Kunming Pan

Journal of Alloys and Compounds

DOI

2020

Study on thermal fatigue performance of the molybdenum plate doped with Al2O3 particles

Yucheng Zhou, Shizhong Wei, Limin Wang, Liujie Xu, Xiuqing Li, Kungming Pan

Journal of Alloys and Compounds

DOI

2019

钨铜合金电导率模型及理论值计算（英文）

王喜然，魏世忠，潘昆明，徐流杰，李秀青，单康宁

《稀有金属材料与工程》

2019

Tribological performance of self-matching pairs of B4C/hBN composite ceramics under different frictional loads

Xiuqing Li, Shizhong Wei, Qingxia Yang, Yimin Gao, Zhichao Zhong

Ceramics International

DOI

2018

Development of tungsten heavy alloy reinforced by cubic zirconia through liquid-liquid doping and mechanical alloying methods

Liujie Xu, Fangnao Xiao, Shizhong Wei, Yucheng Zhou, Kunming Pan, Xiuqing Li, Jiwen Li, Wei Liu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Research on high-temperature properties of the molybdenum sheet doped with 1.0 wt%Al2O3 particles

Yucheng Zhou, Shizhong Wei, Liujie Xu, Xiuqing Li

Journal of Alloys and Compounds

DOI

2018

Influences of hBN content and test mode on dry sliding tribological characteristics of B4C-hBN ceramics against bearing steel

Xiuqing Li, Yimin Gao, Liancheng Song, Qingxia Yang, Shizhong Wei, Long You, Yucheng Zhou, Guoshang Zhang, Liujie Xu, Bin Yang

Ceramics International

DOI

2018

Preparation of w–cu nano-composite powders with high copper content using a chemical co-deposition technique

Xiran Wang, Shizhong Wei, Liujie Xu, Jiwen Li, Xiuqing Li, Kangning Shan

Advanced Powder Technology

DOI

2017

纳米W-Cu复合粉体制备工艺的研究进展

李秀青，魏世忠

《热加工工艺》

2017

Sliding tribological performance of B4C-hBN composite ceramics against AISI 321 steel under distilled water condition

Xiuqing Li, Yimin Gao, Qingxia Yang

Ceramics International

DOI

2016

Tribological behaviors of B 4 C-hBN ceramic composites used as pins or discs coupled with B 4 C ceramic under dry sliding condition

Xiuqing Li, Yimin Gao, Shizhong Wei, Qingxia Yang

Ceramics International

DOI

2016

Dry sliding tribological properties of self-mated couples of B4C-hBN ceramic composites

Xiuqing Li, Yimin Gao, Shizhong Wei, Qingxia Yang, Zhichao Zhong

Ceramics International

DOI

2011

外加颗粒法制备双金属复合材料的组织与性能研究

李秀青

《河南科技大学》

2011

奥氏体化温度对复合轧辊表面工作层力学性能的影响

李秀青，宋延沛

《铸造技术》

2011

载荷对外加颗粒双金属复合材料摩擦性能的影响

李秀青，宋延沛

《特种铸造及有色合金》

2011

WCp/Fe-C再生复合材料的高速摩擦磨损性能研究

陈作栋，宋延沛，李秀青，白婷婷，张云博，黄克豹

《铸造》

2010

Application research of ferrous matrix composites in roller ring used in high-speed wire/bar rolling mill

Yanpei Song, Xiuqing Li, BI Shuang-xu

Materials Science and Engineering A

DOI

2010

Microstructures and Properties of Recycled Composites – Particle Reinforced Iron Matrix Functionally Graded Materials Fabricated by Centrifugal Casting

Yanpei Song, BI Shuang-xu, Xiuqing Li

Engineering

DOI

精选作品

期刊论文

自生碳化物混杂增强Fe-C复合材料的组织及性能

Microstructure and properties of Cu-W-CeO2 alloys with different contents of CeO2 and relevant strengthening mechanism

Influence of Co element content on the microstructure and electrical contact performance under vacuum environment of Cu-Co-W alloy

Effect of tungsten content on microstructure, friction and wear behavior of copper-tungsten alloys

Overcoming strength-ductility-conductivity trade-off in Cu-W immiscible alloys by yttrium-modulated tungsten nano-dispersion

消失模铸造液态金属充型能力测试方法研究

消失模铸造工艺研究现状及展望

Influence of Mo Content on the Microstructure and Mechanical Properties of Cu-Mo Composites Fabricated by Mechanical Alloying and Spark Plasma Sintering

Friction and wear properties of B4C-graphene composite ceramics sliding against TC4 titanium alloy

Microstructure and performance of Cu-Ta-W alloy with the variation of Ta content and correlative mechanism

Effect of Cr content on microstructure and properties of Cu-Cr-W alloy based on theoretical and experimental analysis

Microstructure and dynamic compression behavior of Cu-Cr-W alloy under different impact rates

Effect of W particle size on microstructure and mechanical properties of Cu-10W composites prepared by spark plasma sintering

Experimental and theoretical research on the effect of Co addition on microstructure and properties of Cu-W alloy

Tribological Performance of B 4 C‐hBN/TC4 Titanium Alloy Pair in Seawater: Influence of Sliding Speed

Microstructure and property of Cu–Ti–W alloy taking into account the influence of Ti content

Improvement the thermal stability and mechanical properties of ODS Cu alloy by forming composite oxide dispersion

Research on the dynamic compressive properties of Cu-Co-W alloys with different Co contents

陶瓷颗粒增强镍基复合材料力学性能研究进展

利用SRIM分析辐照对碳化物和氧化物陶瓷的影响（英文）

W-Cu复合材料的应用现状及掺杂改性的研究进展

稀土复合添加剂在近净成形热锻模具钢中的作用研究

Frictional study of B4C-hBN multiphase ceramics and TC4 alloy tribological pair in synthetic seawater

Effect of Y2O3 content on the corrosion behavior of Cu-10W composites prepared by spark plasma sintering

Effect of Y2O3 on high temperature thermal compression performance of Cu–10W composites and microstructure analysis

Microstructure and characteristics of Cu-W composite prepared by W-coated Cu powder with different W contents

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

Microstructure and Texture of Pure Copper under Large Compression Deformation and Different Annealing Times

Simultaneous improvement of strength and plasticity of TZM alloys by introducing α-Al2O3 ceramic particles

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Effect of nano-Y2O3 on the microstructure and mechanical properties of Cu-10W composites prepared by spark plasma sintering

Deformation behavior and microstructure evolution of TZM alloy with 1.0 wt%ZrO2 under high temperature compression

EBSD Analysis of Hot Deformation Behavior of Oxide-Doped Molybdenum Alloys

Mechanical properties and corrosion behavior in molten zinc of Mo–ZrO2 alloys

Tribological Properties of Cu-Based Self-Lubricating Materials Composed with Cu- or Ni-Plated Graphite

冷变形及退火对Ta-2.5W合金微观组织及力学性能的影响

B4C-SiC复合陶瓷的制备及其物理力学性能研究

仿木年轮结构Si3N4/Ni复合材料微观组织及物理力学性能

压缩变形及退火对纯铜组织及性能的影响

Compressive properties and deformation behaviors of sintered W-m-ZrO2 alloy under different temperature

Influence Evaluation of Tungsten Content on Microstructure and Properties of Cu-W Composite

Phase and Microstructure Transition of High Cu Content Cu-W Composite Powder Fabricated by Spray Drying

Dynamic recrystallization behavior of a Mo-2.0%ZrO2 alloy during hot deformation

Effect of spark plasma sintering temperature on structure and performance characteristics of Cu-20wt%W composite

Tribological behaviors of B 4 C–SiC composites self‐mated pairs in seawater and pure water

高温金属结构材料单晶制备及其研究进展

B4C质量分数对Cu-B4C复合材料组织和性能的影响

Research on the hot deformation behavior of Cu-20 wt%W composite under different temperatures

Effect on Microstructure and Performance of B4C Content in B4C/Cu Composite

Mechanical properties and tribological characteristics of B 4 C-SiC ceramic composite in artificial seawater

Establishment of processing map, microstructure and high-temperature tensile properties of W-0.25 wt% Al2O3 alloys

Study on thermal fatigue performance of the molybdenum plate doped with Al2O3 particles

钨铜合金电导率模型及理论值计算（英文）

Tribological performance of self-matching pairs of B4C/hBN composite ceramics under different frictional loads

Development of tungsten heavy alloy reinforced by cubic zirconia through liquid-liquid doping and mechanical alloying methods

Research on high-temperature properties of the molybdenum sheet doped with 1.0 wt%Al2O3 particles

Influences of hBN content and test mode on dry sliding tribological characteristics of B4C-hBN ceramics against bearing steel

Preparation of w–cu nano-composite powders with high copper content using a chemical co-deposition technique

纳米W-Cu复合粉体制备工艺的研究进展

Sliding tribological performance of B4C-hBN composite ceramics against AISI 321 steel under distilled water condition

Tribological behaviors of B 4 C-hBN ceramic composites used as pins or discs coupled with B 4 C ceramic under dry sliding condition

Dry sliding tribological properties of self-mated couples of B4C-hBN ceramic composites

外加颗粒法制备双金属复合材料的组织与性能研究

奥氏体化温度对复合轧辊表面工作层力学性能的影响

载荷对外加颗粒双金属复合材料摩擦性能的影响

WCp/Fe-C再生复合材料的高速摩擦磨损性能研究

Application research of ferrous matrix composites in roller ring used in high-speed wire/bar rolling mill

Microstructures and Properties of Recycled Composites – Particle Reinforced Iron Matrix Functionally Graded Materials Fabricated by Centrifugal Casting

研究方向