百晓学者学者目录

周仲荣

西南交通大学机械工程学院摩擦学研究所

个人简介

周仲荣,西南交通大学机械工程学院摩擦学研究所教授,博士生导师。研究方向为力学、机械工业、金属学及金属工艺。代表性成果包括轮轨界面微动损伤分析、高速列车制动闸片状态监测、人牙磨损行为、单晶铜/硅径向纳米微动、超高分子量聚乙烯扭转微动、表面织构对轮轨黏着影响、陶瓷摩擦学性能调控、高原铁路轮轨界面摩擦学、闸片尺寸对制动振动噪声的调控、陶瓷框架增强聚四氟乙烯仿生复合材料等。

精选作品

期刊论文

  1. 程家豪,宋辛辛,张沭玥,徐梦楠,王文健,郭俊,周仲荣(2026). 干态下表面织构对轮轨黏着特性影响规律研究. 《摩擦学学报(中英文)》.
  2. 王文健,徐梦楠,岳子恒,张沭玥,丁昊昊,赵鑫,周仲荣(2026). 高原铁路轮轨界面摩擦学研究现状及挑战. 《摩擦学学报(中英文)》.
  3. 曹钱,周游,史瑞,赵仲航,雷磊,郑靖,周仲荣(2026). 陶瓷摩擦学性能调控方法研究进展. 《摩擦学学报(中英文)》.DOI
  4. Shuyue Zhang, H. Ye, Z.H. Yue, Jun Li Guo, Haohao Ding, WJ Wang, Zhongrong Zhou (2026). On the crushing strength and breakage characteristics of hard particle used for wheel-rail adhesion restoration. Engineering Fracture Mechanics.DOI
  5. Licheng Hua, Z Ryan Tian, Zhenwu Ning, Jing Zheng, Zhongrong Zhou (2026). Mechanoregulation of biomineralization in the rat incisor. MechanoEngineering.DOI
  6. Sainan Ma, Xiaomin Wang, Yuan Wang, Wang Wenjian, Shuyue Zhang, Qing He, Qiyue Liu, Zhou Zhong-rong, Haohao Ding (2026). Research on the Evolution Behaviors of Rail Surface Temperature During Train Acceleration/Deceleration Processes. Journal of Tribology.DOI
  7. 吴柄男,李佳辛,宋辛辛,师陆冰,张沭玥,丁昊昊,王文健,刘启跃,Lewis Roger,周仲荣(2025). 不同施用条件下轨顶摩擦调节剂的减摩性能研究. 《摩擦学学报(中英文)》.
  8. 王任侠,项载毓,陈伟,莫继良,周仲荣(2025). 闸片摩擦块尺寸设计对高速列车制动振动噪声的调控作用. 《摩擦学学报(中英文)》.DOI
  9. 杨子腾,张蒙祺,莫继良,章龙管,周仲荣(2025). 新型TBM螺旋槽滚刀磨损自锐性研究. 《摩擦学学报(中英文)》.DOI
  10. 韩振宇,汪渊,丁昊昊,张沭玥,王文健,刘佳朋,刘启跃,周仲荣(2025). 不同运行参数下珠光体与贝氏体钢轨钢滚动磨损与接触疲劳行为研究. 《摩擦学学报(中英文)》.
  11. 周仲荣(2025). 关于高速列车超级制动研究的思考. 《机械工程学报》.
  12. Fan Zhang, R. Wei, Yusheng Xiao, Zhongrong Zhou, Zhenbing Cai (2025). Influence of γ irradiation on the structure and tribological properties of polyphenylene sulfide. Chinese Journal of Mechanical Engineering.DOI
  13. Fan Zhang, R. Wei, Yusheng Xiao, Yangxin Ou, Zhongrong Zhou, Zhenbing Cai (2025). Effect of γ-irradiation on the mechanical properties of polyamide 66. Materials Today Communications.DOI
  14. Hujun Wang, Hongcai Huang, Jun Zhang, Gaohui Han, Wei Tian, Fumin Zuo, Wei Liu, Jing Zheng, Zhihui Zhang, Zhongrong Zhou (2025). Macroscale Superlubricity on High‐Roughness Engineering Steel Surface Through Wear Debris‐Converted Tribofilm and Carbon Nanotubes. Advanced Functional Materials.DOI
  15. Min Zhang, Qi Feng, Jiliang Mo, Zaiyu Xiang, Zhongrong Zhou (2025). Cross-speed brake pads state monitoring for long ramps high-speed trains with wheel-rail noise. Measurement.DOI
  16. Renxia Wang, Zaiyu Xiang, Qixiang Zhang, Shaohao Deng, Zhaolin Liu, Jiliang Mo, Zhongrong Zhou (2025). The influence of friction block size on the tribological behavior of high-speed train brake interfaces in cold environments. Engineering Failure Analysis.DOI
  17. Heng Xiao, Lei Lei, Jing Zheng, Zhongrong Zhou (2025). Quantitative characterization of indentation initiated crack growth in bovine enamel. Scientific Reports.DOI
  18. Min Zhang, Wenxin Xu, Jiliang Mo, Zaiyu Xiang, Zhongrong Zhou (2025). Monitoring the deterioration state of braking friction performance of high-speed train under imbalanced data. Engineering Applications of Artificial Intelligence.DOI
  19. Zhang Mengqi, Zhao Youquan, Zhiyao Zhang, Mo Jiliang, Zhou Zhong-rong (2025). On the rock-cutting mechanism and vibration characteristics of TBM insert tooth cutter based on discrete element-dynamics coupling model. Engineering Fracture Mechanics.DOI
  20. Honghao Wang, Wenjian Wang, Shuyue Zhang, H. Y. Xue, Haohao Ding, Zhiyong Shi, Enrico Meli, Roger Lewis, Qiyue Liu, Andrea Rindi, Zhongrong Zhou (2025). Effect of pearlite and proeutectoid ferrite on crack propagation in hypoeutectoid rails considering microstructural deformation. Wear.DOI
  21. Lei Lei, Michael Vincent Swain, You Zhou, Rui Shi, Jing Zheng, Zhongrong Zhou (2025). Critical role of enamel micro- nano-interfaces in providing ductile-like tribological wear resistance. Tribology International.DOI
  22. S.Q. Dou, D.M. Lin, X.Q. Huang, W.J. Wang, Haohao Ding, S.Y. Zhang, Wenbo Yang, Zhongrong Zhou (2025). Effect of material characteristics and axle loads on heavy-haul railway train wheel wear and rolling contact fatigue behavior. Tribology International.DOI
  23. Xinyu Yao, Qiang Lin, Haohao Ding, Yi Yang, Hongtao Zhu, Hongbin Zhu, Wenjian Wang, Huan Qi, Zhongrong Zhou (2025). A novel method to eliminate Laves phases in Ni-based superalloy laser cladding by in-situ theory. Journal of Materials Processing Technology.DOI
  24. Lei Lei, Qian Cao, Yuchi Wu, Mintang Liu, Jing Zheng, Yuanyuan Mei, Zhongrong Zhou (2025). Bioinspired ceramic scaffold-reinforced PTFE composites achieving near-zero wear and self-lubrication under extreme conditions. Friction.DOI
  25. Jiabao Su, Haohao Ding, Wenjian Wang, Xiaoqing Huang, Shuyue Zhang, Roger Lewis, Enrico Meli, Qiyue Liu, Zhongrong Zhou (2025). Experimental study on the effect of brake shoe pressure on wheel wear and fatigue damage behavior during tread braking. Wear.DOI
  26. 王泓豪,丁昊昊,汪渊,陈崇木,王文健,周仲荣(2024). -35℃低温下珠光体/贝氏体钢轨磨损与滚动接触疲劳行为研究. 《钢铁钒钛》.
  27. 伍雨驰,雷磊,刘旻帑,赵仲航,郑靖,周仲荣(2024). 陶瓷框架增强聚四氟乙烯仿生复合材料及其摩擦学性能研究. 《摩擦学学报(中英文)》.
  28. 杨康辉,吴志鑫,苏叶茂,刘少锐,郑靖,周仲荣(2024). 仿生侵蚀介质对滚刀/大理岩滚动摩擦磨损行为的影响. 《表面技术》.
  29. 窦随权,张晓峰,张沭玥,丁昊昊,王文健,刘启跃,周仲荣(2024). 重载铁路磨耗与接触疲劳失效车轮损伤机制研究. 《表面技术》.
  30. 张皓诣,张蒙祺,莫继良,段文军,周仲荣(2024). 不同刃型TBM滚刀载荷与振动特性实验研究. 《中南大学学报(自然科学版)》.
  31. Hujun Wang, Xiuyuan Zhao, Zhengcan Xie, Biao Yang, Jing Zheng, Kai Yin, Zhongrong Zhou (2024). Bioinspired directional structures for inhibiting wetting on super-melt-philic surfaces above 1200 °C. International Journal of Extreme Manufacturing.DOI
  32. Zhongrong Zhou (2024). Tribology in China. Friction.DOI
  33. Bingnan Wu, Jiaxin LI, Shu-yue Zhang, Lubing Shi, Haohao Ding, Qiang Lin, WJ Wang, Jun Li Guo, Zhongrong Zhou, Roger Lewis, Jianhua Zhou (2024). Study on the application amount optimization of water-based friction modifier based on field experiments. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit.DOI
  34. Ruixue Sun, Mengqi Zhang, Jiliang Mo, Haoyi Zhang, Zhongrong Zhou (2024). Coupling effect of cross-section and contact status on load and vibration characteristics of TBM cutters. Mechanical Systems and Signal Processing.DOI
  35. Mengqi Zhang, Ruixue Sun, Jiliang Mo, Zhongrong Zhou (2024). Frictional contact-vibration coupling model for tbm rock cutting with multi-cutter. Computers and Geotechnics.DOI
  36. Yuanke Wu, Wei Chen, Youguang Zhu, Zaiyu Xiang, Honghua Qian, Jiliang Mo, Zhongrong Zhou (2024). The effect of friction block hole configurations on the brake tribological performance of high-speed trains. Friction.DOI
  37. Min Zhang, Ruohui Hu, Jiliang Mo, Zaiyu Xiang, Zhongrong Zhou (2024). A cross-domain state monitoring method for high-speed train brake pads based on data generation under small sample conditions. Measurement.DOI
  38. Min Zhang, Jiamin Li, Jiliang Mo, Mingxue Shen, Zaiyu Xiang, Zhongrong Zhou (2024). High-Speed Train Brake Pads Condition Monitoring Based on Trade-Off Contrastive Learning Network. IEEE Transactions on Instrumentation and Measurement.DOI
  39. Z.Y. Han, Hsiang-Hsu Wang, Weijie Wang, S.Y. Zhang, Dongdong Lin, Yier Wang, Haohao Ding, Zhongrong Zhou, Q.Y. Liu (2024). The correlation between material deformed microstructure and rolling contact fatigue crack propagation of U71Mn rail when matching with CL60 wheel. Tribology International.DOI
  40. Hujun Wang, Yue Feng Tang, Haonan Qiu, Jingyang Hu, Yuan Su, Jing Zheng, Zhongrong Zhou (2024). Enamel matrix proteins in promoting saliva lubrication. Friction.DOI
  41. Min Zhang, Shihao Xu, Jiliang Mo, Zaiyu Xiang, Zhongrong Zhou (2024). Effect of uneven wear on the stability of friction braking system in high-speed train. Engineering Failure Analysis.DOI
  42. 邓雨,张蒙祺,莫继良,周仲荣(2023). 复合地层中不同刃形滚刀与岩石接触行为研究. 《表面技术》.
  43. 刘启昂,莫继良,项载毓,陈伟,张棋翔,周仲荣(2023). 实现振动解耦的摩擦学行为模拟试验台设计方法. 《摩擦学学报(中英文)》.
  44. 王朝晖,吴志鑫,杨康辉,苏叶茂,郑靖,周仲荣(2023). 仿生中性络合剂对花岗岩摩擦磨损行为的影响研究. 《摩擦学学报(中英文)》.
  45. 段文军,张蒙祺,勾斌,莫继良,周仲荣(2023). 刃形对硬岩地层中TBM滚刀磨损行为的影响研究. 《摩擦学学报(中英文)》.DOI
  46. 张蒙祺,王一博,章龙管,段文军,苏叶茂,莫继良,周仲荣(2023). 不同岩石和围压下刃形对滚刀破岩性能的影响. 《西南交通大学学报》.
  47. 孙瑞雪,张蒙祺,莫继良,周仲荣(2023). 隧道掘进机离散元-系统动力学耦合分析方法. 《第十五届全国振动理论及应用学术会议摘要集》.DOI
  48. ZHANG Mengqi, GOU Bin, Yu Deng, DUAN Wenjun, Jiliang Mo, Zhou Zhong-rong (2023). Cutting Performance and Contact Behavior of a Novel TBM Cutter with Surface Spiral Grooves. Journal of Mechanical Engineering.DOI
  49. Quan Wang, Zhiwei Wang, Jiliang Mo, Caizhou Zhai, Qingbing Gou, Zhongrong Zhou (2023). Dynamic response analysis of a train braking system with time-varying coefficient of friction excitations. Mechanical Systems and Signal Processing.DOI
  50. Zhiwei Wang, Jiliang Mo, Kaiyun Wang, Zhongrong Zhou (2023). A novel vehicle-track coupled dynamics model with disc brake systems: modelling and validation. Vehicle System Dynamics.DOI
  51. Quan Wang, Zhiwei Wang, Jiliang Mo, Zhongrong Zhou (2023). Modelling and stability analysis of a high-speed train braking system. International Journal of Mechanical Sciences.DOI
  52. Ruixue Sun, Jiliang Mo, Mengqi Zhang, Zhongrong Zhou (2023). Interaction between partial-worn TBM cutters and rocks: experimental and numerical investigation. Bulletin of Engineering Geology and the Environment.DOI
  53. Dan Yang, Wentao Liu, Yingjia Chen, Jing Zheng, Peter S. Ungar, Zhongrong Zhou (2023). Friction regulation of chiton radulae through the interlocking effect of rigid-flexible structures. Tribology International.DOI
  54. Hujun Wang, Haonan Qiu, Wei Liu, Lulin Tian, Jing Zheng, Zhihui Zhang, Zhongrong Zhou (2023). Anti-wear properties of multi-bioinspired textures with hierarchical and superhydrophobic structures under water lubrication. Wear.DOI
  55. Zhixin Wu, Lei Lei, Yemao Su, Kanghui Yang, Jing Zheng, Zhongrong Zhou (2023). Limpet radula-inspired triangular groove TBM cutter for hard rock breakage with low specific wear. Tribology International.DOI
  56. Bingnan Wu, Lubing Shi, Haohao Ding, Jun Li Guo, Qiyue Liu, Zhongrong Zhou, Roger Lewis, Wenjian Wang (2023). Influence of different solid particles in friction modifier on wheel-rail adhesion and damage behaviours. Wear.DOI
  57. H.H. Wang, W.J. Wang, Z.Y. Han, Y. Wang, Haohao Ding, Roger Lewis, Qiang Lin, Q.Y. Liu, Zhongrong Zhou (2023). Wear and rolling contact fatigue competition mechanism of different types of rail steels under various slip ratios. Wear.DOI
  58. S.Y. Zhang, Zhengmao Feng, W.J. Wang, Hai Zhao, Haohao Ding, Qian Liu, Maksym Spiryagin, Zhongrong Zhou (2023). Effects of varying normal loads on the rail rolling contact fatigue behavior under various frequencies and creepages. Wear.DOI
  59. Shanfei Zhang, Haohao Ding, Qiang Lin, Qiaoyuan Liu, Maksym Spiryagin, Qing Wu, Weijie Wang, Zhongrong Zhou (2023). Experimental study on wheel-rail rolling contact fatigue damage starting from surface defects under various operational conditions. Tribology International.DOI
  60. 范志勇,项载毓,莫继良,钱泓桦,陈伟,周仲荣(2022). 摩擦粒子填充材料对高速列车闸片制动性能的影响. 《摩擦学学报(中英文)》.DOI
  61. Ruoyu Sun, Jing Zhao, Jiliang Mo, Nengkai Yu, Zhongrong Zhou (2022). Study of the drag reduction performance on steel spheres with superhydrophobic ER/ZnO coating. Materials Science and Engineering B.DOI
  62. De Chen, Yukun Li, Xuemei Cao, Taiheng Wu, Haoran Zhang, Zhi Qiang Qiao, Changchang Niu, Yingdan Wang, Si Wang, Ling Cheng, Qian Su, Zhongrong Zhou (2022). Evaluating characteristics of particles’ surface micro-texture of granular materials based on the spectral analysis method. International Journal of Pavement Engineering.DOI
  63. Lei Lei, Dan Yang, Jing Zheng, Zhixin Wu, Heng Xiao, Zhongrong Zhou (2022). Bioinspired inverse enamel-like columnar composites reproducing the mechanical properties and tribological performance of human enamel. Applied Materials Today.DOI
  64. Haohao Ding, Jingchao Li, Xiaolu Cui, Qian Xiao, Jun Li Guo, Qiyue Liu, Wenjian Wang, Zhongrong Zhou (2022). Peridynamic simulationons of RCF crack growth in laser quenched rail material. Engineering Fracture Mechanics.DOI
  65. Jiapin Peng, Heng Xiao, Lei Lei, Dan Yang, Jing Zheng, Zhongrong Zhou (2022). Heterogeneous hardening of enamel surface by occlusal loading: Effect of nanofiber orientation. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  66. Zhenwu Ning, Zhongrong Zhou, Jing Zheng (2022). The correlation between biotribological function and structural characteristics of bamboo rat teeth. Biosurface and Biotribology.DOI
  67. S.Y. Zhang, Hai Zhao, Haohao Ding, Qiang Lin, W.J. Wang, Jianqiang Guo, PengXiao Wang, Zhongrong Zhou (2022). Effect of vibration amplitude and axle load on the rail rolling contact fatigue under water condition. International Journal of Fatigue.DOI
  68. Yue Feng Tang, Lei Lei, Dan Yang, Jing Zheng, Qihang Zeng, Heng Xiao, Zhongrong Zhou (2022). Calcium release-mediated adsorption and lubrication of salivary proteins on resin-based dental composites. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  69. S.Y. Zhang, Q.Y. Liu, Weijie Wang, Maksym Spiryagin, Qiang Lin, Haohao Ding, Qing Wu, Zhongrong Zhou (2022). Implications of water medium for the evolution of rolling contact fatigue under rail surface defect conditions. Tribology International.DOI
  70. Mengqi Zhang, Bin Gou, Jiliang Mo, Wenjun Duan, Zhongrong Zhou (2022). Rock-cutting and wear performance of a novel TBM disc cutter with spiral grooves. Tunnelling and Underground Space Technology.DOI
  71. Haohao Ding, Jinyu Yang, Wenjian Wang, Qiyue Liu, Jun Li Guo, Zhongrong Zhou (2022). Wear mechanisms of abrasive wheel for rail facing grinding. Wear.DOI
  72. Ruixue Sun, Jiliang Mo, Mengqi Zhang, Yemao Su, Zhongrong Zhou (2022). Cutting performance and contact behavior of partial-wear TBM disc cutters: A laboratory scale investigation. Engineering Failure Analysis.DOI
  73. Qun Li, Bingnan Wu, Haohao Ding, Radovan Galas, Daniel Kvarda, Qiyue Liu, Zhongrong Zhou, Milan Omasta, Wenjian Wang (2022). Numerical prediction on the effect of friction modifiers on adhesion behaviours in the wheel-rail starved EHL contact. Tribology International.DOI
  74. Jiapin Peng, Lei Lei, Heng Xiao, Dan Yang, Jing Zheng, Zhongrong Zhou (2022). Restoration of enamel anti-wear properties via remineralization: Role of occlusal loading. Friction.DOI
  75. 段文军,李贞,王好平,莫继良,章龙管,李建斌,周仲荣(2021). 盾构滚刀材料表面镍基碳化钨涂层摩擦学性能研究. 《表面技术》.
  76. 项载毓,范志勇,刘启昂,吴元科,莫继良,周仲荣(2021). 高速列车制动闸片摩擦块形状对制动界面摩擦学行为的影响. 《摩擦学学报(中英文)》.DOI
  77. 聂佳辉,吴志鑫,雷磊,郑靖,周仲荣(2021). TBM的刀具改性与辅助破岩技术研究现状. 《机械》.
  78. Zhenwu Ning, Kun Chen, Jing Zheng, Dan Yang, Shaobing Zhou, Zhongrong Zhou (2021). Biomimetic Fe‐hydroxyapatite nanoparticle‐reinforced bisphenol A‐glycol methacrylate/triethyleneglycol‐dimethacrylate resins for dental restorative application. Journal of Applied Polymer Science.DOI
  79. Wenjun Duan, Longguan Zhang, Mengqi Zhang, Yemao Su, Jiliang Mo, Zhongrong Zhou (2021). Numerical and Experimental Studies on the Effects of the TBM Cutter Profile on Rock Cutting. KSCE Journal of Civil Engineering.DOI
  80. Heng Xiao, J.A. Arsecularatne, Jing Zheng, Mark Hoffman, Zhongrong Zhou (2021). Effect of HAP crystallite orientation upon corrosion and tribocorrosion behavior of bovine and human dental enamel. Corrosion Science.DOI
  81. Xiaofan Wang, Jiliang Mo, Huajiang Ouyang, Zaiyu Xiang, Wei Chen, Zhongrong Zhou (2021). Simultaneous energy harvesting and tribological property improvement. Friction.DOI
  82. Haohao Ding, Xinpeng Mu, Yi Zhu, Wenbin Yang, Qian Xiao, Wenjian Wang, Qiyue Liu, Jun Li Guo, Zhongrong Zhou (2021). Effect of laser claddings of Fe-based alloy powder with different concentrations of WS2 on the mechanical and tribological properties of railway wheel. Wear.DOI
  83. Jing Zheng, Zhixin Wu, Jiahui Nie, Lei Lei, Zhongrong Zhou, Jianbin Li (2021). From rock‐boring organisms to tunnel boring machines: A new rock breaking technology by bioinspiration. Biosurface and Biotribology.DOI
  84. X.C. Li, Haohao Ding, Weijie Wang, Junlong Guo, Q.Y. Liu, Zhongrong Zhou (2021). Investigation on the relationship between microstructure and wear characteristic of rail materials. Tribology International.DOI
  85. Lei Lei, Yue Feng Tang, Jing Zheng, Genlei Ma, Zhongrong Zhou (2021). Influence of two polyphenols on the structure and lubrication of salivary pellicle: An in vitro study on astringency mechanism. Friction.DOI
  86. S.Y. Zhang, X.J. Zhao, Haohao Ding, Maksym Spiryagin, Junlong Guo, Q.Y. Liu, Weijie Wang, Zhongrong Zhou (2021). Effects of dent size on the evolution process of rolling contact fatigue damage on defective rail. Wear.DOI
  87. Chuangwe Wang, Lubing Shi, Haohao Ding, Weijie Wang, Radovan Galas, Junlong Guo, Q.Y. Liu, Zhongrong Zhou, Milan Omasta (2021). Adhesion and damage characteristics of wheel/rail using different mineral particles as adhesion enhancers. Wear.DOI
  88. 范志勇,项载毓,谭德强,唐斌,李贞,莫继良,周仲荣(2020). CRH380A型高速动车组制动闸片摩擦损伤分析. 《摩擦学学报(中英文)》.DOI
  89. 曾启航,唐悦,周均,郑靖,周仲荣(2020). 唾液蛋白的吸附与润滑行为研究进展. 《表面技术》.DOI
  90. 刘陶峰,李一员,李炜,周仲荣(2020). 确定性纹理表面特征高度对皮肤摩擦感知的影响. 《西南交通大学学报》.
  91. Z.Y. Xiang, Weirong Chen, Jiliang Mo, Q.A. Liu, Z.Y. Fan, Zhongrong Zhou (2020). The effects of the friction block shape on the tribological and dynamical behaviours of high-speed train brakes. International Journal of Mechanical Sciences.DOI
  92. Heng Xiao, Liang Zheng, Wei Han, Rui Fen Wu, Jing Zheng, Zhongrong Zhou (2020). Protective effects of two food hydrocolloids on dental erosion: Nanomechanical properties and microtribological behavior study. Friction.DOI
  93. Bingrui Wang, JianTao Liu, Wei Li, Zhongrong Zhou (2020). Modeling the initial-volume dependent approximate compressibility of porcine liver tissues using a novel volumetric strain energy model. Journal of Biomechanics.DOI
  94. Mengqi Zhang, Zhongrong Zhou (2020). Semi-analytical contact model for analyzing rock fragmentation induced by an indenter. Tunnelling and Underground Space Technology.DOI
  95. Lei Lei, Liang Zheng, Heng Xiao, Jing Zheng, Zhongrong Zhou (2020). Wear mechanism of human tooth enamel: The role of interfacial protein bonding between HA crystals. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  96. Chuan He, Haohao Ding, Lubing Shi, Junlong Guo, Enrico Meli, Q.Y. Liu, Andrea Rindi, Zhongrong Zhou, Weijie Wang (2020). On the microstructure evolution and nanocrystalline formation of pearlitic wheel material in a rolling-sliding contact. Materials Characterization.DOI
  97. Chengxiong Lin, Pan Ren, Wei Li, Hengyi Deng, Zhongrong Zhou (2020). Patient-specific finite element analysis of frictional behavior in different esophageal regions during endoscopy. Acta of Bioengineering and Biomechanics.DOI
  98. De Chen, Si Wang, Mingliang Shen, Qingting Qian, Qian Su, Jiliang Mo, Zhongrong Zhou, Tewodros Girmay (2020). Aggregate micro tribological properties of sponge city permeable pavement base layer under vehicle loading. Construction and Building Materials.DOI
  99. Jiapin Peng, Heng Xiao, Dan Yang, Lei Lei, Jing Zheng, Zhongrong Zhou (2020). Surface Hardening Behavior of Enamel by Masticatory Loading: Occurrence Mechanism and Antiwear Effect. ACS Biomaterials Science & Engineering.DOI
  100. Chengxiong Lin, Wei Chiang Liu, Jingyang Xie, Wei Li, Zhongrong Zhou (2020). The Lubricating Function of Mucin at the Gastroscope Device-Esophagus Interface. Tribology Letters.DOI
  101. Donglong Li, Mengqi Zhang, Lechun Xie, Zhanjiang Wang, Zhongrong Zhou, Ning Zhao, D.E.B. Palmer, Q. Jane Wang (2020). Contact Yield Initiation and Its Influence on Rolling Contact Fatigue of Case-Hardened Steels. Journal of Tribology.DOI
  102. Kai Tang, Wenjian Wang, Haohao Ding, Liucheng Zhou, Jun Li Guo, Weifeng He, Zhenbing Cai, Qiyue Liu, Zhongrong Zhou (2020). Influence of laser shock peening on fatigue performance of LZ50 axle steel for railway wheel set. Fatigue & Fracture of Engineering Materials & Structures.DOI
  103. Chengxiong Lin, Pan Ren, Wei Li, Hengyi Deng, Zhongrong Zhou (2020). Finite‐element modelling of frictional behaviour between oesophagus and endoscope. Biosurface and Biotribology.DOI
  104. Honghua Qian, Jiliang Mo, Zaiyu Xiang, Bin Hui Tang, Zhiyong Fan, Zhongrong Zhou (2020). The effect of the macroscopic contact surface status caused by the uneven wear on friction induced vibration.DOI
  105. 尹美贵,蔡振兵,李正阳,周仲荣,王文建,何卫锋(2019). 激光冲击强化改善Ti-6Al-4V合金冲击磨损性能(英文). Transactions of Nonferrous Metals Society of China.
  106. 张力,戴安,李炜,周仲荣(2019). 缝合打结过程中手术缝合线力学性能研究. 《生物医学工程学杂志》.
  107. Lei Chen, Zhe Chen, Xiaoyu Tang, Wenmeng Yan, Zhongrong Zhou, Linmao Qian, Seong H. Kim (2019). Friction at single-layer graphene step edges due to chemical and topographic interactions. Carbon.DOI
  108. Li Zhang, An Lun Dai, Wei Li, Zhongrong Zhou (2019). [Study on the mechanical properties of sutures in the process of suturing]. PubMed.DOI
  109. Licheng Hua, W.Y. Wang, Michael Vincent Swain, C.L. Zhu, Haibo Huang, Jianke Du, Zhongrong Zhou (2019). The dehydration effect on mechanical properties of tooth enamel. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  110. Jindong Wang, Cong Cheng, Xiaotao Zeng, Jing Zheng, Zhongrong Zhou (2019). Bionic-tribology design of tooth surface of grinding head based on the bovine molar. Tribology International.DOI
  111. Haohao Ding, C.R. Su, Weijie Wang, Zhenbing Cai, Diankang Wang, Junlong Guo, Q.Y. Liu, Zhongrong Zhou (2019). Investigation on the rolling wear and damage properties of laser discrete quenched rail material with different quenching shapes and patterns. Surface and Coatings Technology.DOI
  112. Xin Quan, Jiliang Mo, Bo Huang, Bin Hui Tang, Huajiang Ouyang, Zhongrong Zhou (2019). Influence of the Friction Block Shape and Installation Angle of High-Speed Train Brakes on Brake Noise. Journal of Tribology.DOI
  113. Xiaosong Lu, Jinzhao Zhao, Jiliang Mo, Yi Wu, J.W. Xu, Y. F. Zhang, Zhongrong Zhou (2019). Suppression of Friction-Induced Stick–Slip Behavior and Improvement of Tribological Characteristics of Sliding Systems by Introducing Damping Materials. Tribology Transactions.DOI
  114. Meigui Yin, Zhenbing Cai, Zhenyang Li, Zhongrong Zhou, Wenjian Wang, Weifeng He (2019). Improving impact wear resistance of Ti-6Al-4V alloy treated by laser shock peening. Transactions of Nonferrous Metals Society of China.DOI
  115. Yu Rong Lin, Shiyan Ding, Liucheng Zhou, Weifeng He, Zhenbing Cai, Wenjian Wang, Zhongrong Zhou (2019). Influence of laser shock peening parameters on the abrasive wear behavior of TC4 titanium alloy under controlled cycling impact. Materials Research Express.DOI
  116. Qihang Zeng, Jing Zheng, Dan Yang, Yue Feng Tang, Zhongrong Zhou (2019). Effect of calcium ions on the adsorption and lubrication behavior of salivary proteins on human tooth enamel surface. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  117. Quanping Feng, Wei Li, Xidong Liu, Wei Ji, Zhongrong Zhou (2019). Investigation of reciprocating friction characteristics between different bionic surfaces of prosthesis materials and skin. Biosurface and Biotribology.DOI
  118. Deqiang Tan, Jiliang Mo, Jifan He, Luo Jian, Qi Zhang, Minhao Zhu, Zhongrong Zhou (2019). Effect of structural stiffness on impact-sliding wear behavior of aluminium alloy. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  119. Yu Rong Lin, Zhenbing Cai, Zhengyang Li, Meigui Yin, Wenjian Wang, Weifeng He, Zhongrong Zhou (2019). Study on the abrasive wear behavior of laser shock peening Ti-6Al-4V titanium alloy under controlled cycling impact. Wear.DOI
  120. Qihang Zeng, Genlei Ma, Heng Xiao, Dan Yang, Jing Zheng, Liang Zheng, Zhongrong Zhou (2019). Effect of saliva flow rate on the adsorption kinetics and lubrication of salivary pellicle on human tooth enamel surface. Wear.DOI
  121. C.R. Su, Lubing Shi, Weijie Wang, Diankang Wang, Zhenbing Cai, Q.Y. Liu, Zhongrong Zhou (2019). Investigation on the rolling wear and damage properties of laser dispersed quenched rail materials treated with different ratios. Tribology International.DOI
  122. Yue Hu, C.R. Su, L.C. Guo, Q.Y. Liu, Junlong Guo, Zhongrong Zhou, Weijie Wang (2019). Effect of rolling direction on microstructure evolution of CL60 wheel steel. Wear.DOI
  123. 莫继良,王东伟,李建熹,李贞,朱旻昊,周仲荣(2018). 摩擦热对界面磨损及制动系统稳定性的影响. 《上海交通大学学报》.
  124. 李炜,鲍雄,周仲荣(2018). 微创手术缝合针刺破组织过程中能量耗散研究. 《机械工程学报》.
  125. 李凯,林承雄,李炜,周仲荣(2018). 不同润滑介质下食管组织的摩擦特性研究. 《摩擦学学报(中英文)》.
  126. 谭德强,莫继良,罗健,张琦,朱旻昊,周仲荣(2018). 高速铁路接触网定位钩和定位支座失效分析. 《中国铁道科学》.
  127. 王进,李炜,周仲荣(2018). 腹腔镜手术钳夹持组织过程中安全性研究. 《生物医学工程学杂志》.
  128. Zhenbing Cai, Zhengyang Li, Yuan Fa Ding, Jing Zheng, Jianhua Liu, Zhongrong Zhou (2018). Preparation and impact resistance performance of bionic sandwich structure inspired from beetle forewing. Composites Part B Engineering.DOI
  129. Jing Xia, Zhongrong Zhou, Linmao Qian, Peter S. Ungar (2018). Comment on van Casteren et al . (2018): softer metallic spheres do abrade harder enamel. Royal Society Open Science.DOI
  130. Wei Gong, Sheng Yang, Liang Zheng, Heng Xiao, Jing Zheng, Bin Wu, Zhongrong Zhou (2018). Consolidating effect of hydroxyapatite on the ancient ivories from Jinsha ruins site: Surface morphology and mechanical properties study. Journal of Cultural Heritage.DOI
  131. Licheng Hua, Jing Zheng, Zhongrong Zhou, Z. Ryan Tian (2018). Water-Switchable Interfacial Bonding on Tooth Enamel Surface. ACS Biomaterials Science & Engineering.DOI
  132. X. G. Cao, Lubing Shi, Zhenbing Cai, Q.Y. Liu, Zhongrong Zhou, Weijie Wang (2018). Investigation on the microstructure and damage characteristics of wheel and rail materials subject to laser dispersed quenching. Applied Surface Science.DOI
  133. Qiang Deng, ZHIFANG ZONG, Zhenwu Ning, Jing Zheng, Jiantao Liu, Zhongrong Zhou (2018). A COMPUTATIONAL STRATEGY TO EXAMINE THE PROFILE EFFECTS OF MICROPRISM REGIONS ON THE OVERALL ANISOTROPY OF HUMAN ENAMELS. Journal of Mechanics in Medicine and Biology.DOI
  134. Jin Wang, Wei Li, Zhongrong Zhou (2018). [Security research of laparoscopic graspers during tissue clamping operation]. PubMed.DOI
  135. Heng Xiao, Lei Lei, Jiapin Peng, Dan Yang, Qihang Zeng, Jing Zheng, Zhongrong Zhou (2018). Research of the role of microstructure in the wear mechanism of canine and bovine enamel. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  136. Chengxiong Lin, W. Li, Hengyi Deng, K. Li, Zhongrong Zhou (2018). Friction Behavior of Esophageal Mucosa Under Axial and Circumferential Extension. Tribology Letters.DOI
  137. Deqiang Tan, Jiliang Mo, Weifeng He, Jian Ju Luo, Qi Zhang, Min-hao Zhu, Zhongrong Zhou (2018). Suitability of laser shock peening to impact-sliding wear in different system stiffnesses. Surface and Coatings Technology.DOI
  138. Jin Wang, Li Ma, Wei Li, Zhongrong Zhou (2018). Safety of laparoscopic graspers with different configurations during liver tissue clamping. Biosurface and Biotribology.DOI
  139. Lubing Shi, Lei Ma, Junlong Guo, Q.Y. Liu, Zhongrong Zhou, Weijie Wang (2018). Influence of low temperature environment on the adhesion characteristics of wheel-rail contact. Tribology International.DOI
  140. D.W. Wang, Jiliang Mo, Huajiang Ouyang, Zhongrong Zhou (2018). Improving Dynamic and Tribological Behaviours by Means of a Mn–Cu Damping Alloy with Grooved Surface Features. Tribology Letters.DOI
  141. Q. Zhang, Jiliang Mo, Xiaosong Lu, Jinzhao Zhao, D.W. Wang, Zhongrong Zhou (2018). Grooved-structure design for improved component damping ability. Tribology International.DOI
  142. 张宇轩,纪伟,刘陶峰,李炜,周仲荣(2017). 迷彩服织物与人体肘部皮肤摩擦特性研究. 《摩擦学学报(中英文)》.
  143. 张青,崔晓璐,陈光雄,周仲荣(2017). 沟槽织构对盘形制动噪声的影响. 《机械设计》.
  144. 王东伟,莫继良,张琦,朱章扬,周仲荣(2017). 沟槽表面填充材料对界面摩擦振动噪声的影响. 《摩擦学学报(中英文)》.
  145. 纪伟,展茂利,李炜,周仲荣(2017). 假肢接受腔-人体皮肤界面往复摩擦能量损耗的研究. 《摩擦学学报(中英文)》.
  146. 于卿源,钱诗梦,林承雄,杨青原,赵豪川,刘建涛,周仲荣(2017). 食管黏膜组织在轴向延伸下的摩擦特性研究. 《摩擦学学报(中英文)》.DOI
  147. Qihang Zeng, Liang Zheng, Jun Zhou, Heng Xiao, Jing Zheng, Zhongrong Zhou (2017). Effect of alcohol stimulation on salivary pellicle formation on human tooth enamel surface and its lubricating performance. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  148. Tao Liu, Qiang Deng, Dan Yang, Jing Zheng, JianTao Liu, Zhongrong Zhou (2017). Automatic modeling together with numerical simulation of the different-scale microstructures of human tooth enamels. Science China Technological Sciences.DOI
  149. Zhongrong Zhou, Paul J. Constantino, Mark Hoffman, Mugino O. Kubo, Gildas Merceron, Mark A. Purnell, Eugeniusz Sajewicz, Gordon D. Sanson, Ellen Schulz‐Kornas, Michael Steven Swain, Mark F. Teaford, Jing Zheng, Linmao Qian, Licheng Hua, Peter S. Ungar (2017). Dental Biotribology: Final thoughts and future directions. Biosurface and Biotribology.DOI
  150. Jing Xia, Zhihui Tian, Licheng Hua, Lei Chen, Zhongrong Zhou, Linmao Qian, Peter S. Ungar (2017). Enamel crystallite strength and wear: nanoscale responses of teeth to chewing loads. Journal of The Royal Society Interface.DOI
  151. Li Zhang, Wei Li, Chengxiong Lin, Zhongrong Zhou (2017). Friction Behavior at the Interface Between Surgical Sutures and Tissues. Tribology Letters.DOI
  152. Cheng-mo Cai, Qing-Yuan Yu, Wei Li, Jing Zheng, Zhongrong Zhou (2017). Experimental creep behavior of porcine liver under indentation with laparoscopic grasper for MIS applications. Biosurface and Biotribology.DOI
  153. Yang Sun, Zhenbing Cai, Zhiqiang Chen, Hao Qian, Lichen Tang, Yongcheng Xie, Zhongrong Zhou, Min-hao Zhu (2017). Impact fretting wear of Inconel 690 tube with different supporting structure under cycling low kinetic energy. Wear.DOI
  154. Liang Zheng, Jiapin Peng, Jing Zheng, Dongwen Liu, Zhongrong Zhou (2017). Surface properties of eroded human primary and permanent enamel and the possible remineralization influence of CPP-ACP. Wear.DOI
  155. 张猛,莫继良,徐敬业,周仲荣(2016). 一种分析手指接触摩擦的新型试验装置. 《摩擦学学报(中英文)》.
  156. 付和林,郝汝飞,郑靖,周仲荣(2016). 高频电刀电凝模式下304不锈钢和钨两种电极表面的组织粘附行为. 《中国表面工程》.
  157. 茹磊磊,郑靖,栗云龙,周仲荣(2016). 电刀功率对肌肉组织损伤影响的有限元分析. 《中国生物医学工程学报》.
  158. D.W. Wang, Jiliang Mo, Zhenyu Zhu, Huajiang Ouyang, Minhao Zhu, Zhongrong Zhou (2016). How do grooves on friction interface affect tribological and vibration and squeal noise performance. Tribology International.DOI
  159. Zhongmin M. Jin, Jing Zheng, W. Li, Zhongrong Zhou (2016). Tribology of medical devices. Biosurface and Biotribology.DOI
  160. Zhenbing Cai, Hai-da Guan, Zhiqiang Chen, Hao Qian, Lichen Tang, Zhongrong Zhou, Min-hao Zhu (2016). Impact fretting wear behavior of 304 stainless steel thin-walled tubes under low-velocity. Tribology International.DOI
  161. Y.F. Zhang, Jing Zheng, Liang Zheng, Zhongrong Zhou (2016). Influence of centrifugation treatment on the lubricating properties of human whole saliva. Biosurface and Biotribology.DOI
  162. Jing Zheng, Yangyang Zeng, Jian Bo Wen, Liang Zheng, Zhongrong Zhou (2016). Impact wear behavior of human tooth enamel under simulated chewing conditions. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  163. 张青,崔晓璐,陈光雄,周仲荣(2015). 钢轨打磨热力耦合分析. 《铁道学报》.
  164. Licheng Hua, Peter S. Ungar, Zhongrong Zhou, Zhenwu Ning, Jing Zheng, Linmao Qian, Jerome C. Rose, Dan Yang (2015). Dental development and microstructure of bamboo rat incisors. Biosurface and Biotribology.DOI
  165. Jing Xia, Jing Zheng, Diaodiao Huang, Z. Ryan Tian, Lei Chen, Zhongrong Zhou, Peter S. Ungar, Linmao Qian (2015). New model to explain tooth wear with implications for microwear formation and diet reconstruction. Proceedings of the National Academy of Sciences.DOI
  166. Wen Li, Q. Pang, Minhua Lu, Yu Liu, Zhongrong Zhou (2015). Rehabilitation and adaptation of lower limb skin to friction trauma during friction contact. Wear.DOI
  167. Zhongrong Zhou, Zhongmin M. Jin (2015). Biotribology: Recent progresses and future perspectives. Biosurface and Biotribology.DOI
  168. 闻健,郑靖,郑良,周仲荣(2014). 冲击接触加载下人体天然牙的磨损行为研究. 《摩擦学学报(中英文)》.
  169. 张冰玉,李炜,石磊,周仲荣(2014). 不同法向力和纹理间距下的手指皮肤感知能力研究. 《摩擦学学报(中英文)》.
  170. 文鸣,郑靖,周仲荣(2014). 有机相对人牙釉质力学性能影响的有限元分析. 《润滑与密封》.
  171. 张青,王古月,张科元,陈光雄,周仲荣(2014). 列车轮盘制动系统的热-机耦合分析. 《润滑与密封》.
  172. Y.F. Zhang, Jing Zheng, Liang Zheng, Zhongrong Zhou (2014). Effect of adsorption time on the adhesion strength between salivary pellicle and human tooth enamel. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  173. D.W. Wang, Jiliang Mo, Huajiang Ouyang, G.X. Chen, Minhao Zhu, Zhongrong Zhou (2014). Experimental and numerical studies of friction-induced vibration and noise and the effects of groove-textured surfaces. Mechanical Systems and Signal Processing.DOI
  174. Erqing Zhang, Pan Fu, Kesi Li, Xiaohui Li, Zhongrong Zhou (2014). Film Thickness Measurement Of Mechanical Seal Based On Cascaded Artificial Neural Network Recognition Model. International Journal on Smart Sensing and Intelligent Systems.DOI
  175. Wen Li, Zhanrong Jia, Jingtai Wang, Lei Shi, Zhongrong Zhou (2014). Friction behavior at minimally invasive grasper/liver tissue interface. Tribology International.DOI
  176. Wei Li, Lei Shi, Hengyi Deng, Zhongrong Zhou (2014). Investigation on Friction Trauma of Small Intestine In Vivo Under Reciprocal Sliding Conditions. Tribology Letters.DOI
  177. 张亚锋,郑靖,钱林茂,周仲荣(2013). 吸附时间对人牙表面唾液吸附膜润滑性能的影响研究. 《第十一届全国摩擦学大会论文集》.
  178. 石茂渝,郑靖,周仲荣(2013). 激光处理对人牙釉质酸蚀和耐磨性能的影响. 《机械》.
  179. 华李成,郑靖,周仲荣(2013). 不同食性哺乳动物牙齿的微观结构. 《第十一届全国摩擦学大会》.
  180. 郭静,王文健,刘启跃,周仲荣(2013). 不同工况下轮轨材料间的摩擦磨损行为. 《机械工程材料》.
  181. 华李成,郑靖,周仲荣(2013). 水分对猪牙表面硬度和摩擦系数的影响. 《摩擦学学报(中英文)》.
  182. Wangping Qian, G. X. Chen, Weihua Zhang, Huajiang Ouyang, Zhongrong Zhou (2013). Friction-Induced, Self-Excited Vibration of a Pantograph-Catenary System. Journal of vibration and acoustics.DOI
  183. Zhou Zhong-rong (2013). Friction and Wear Behavior of Wheel/Rail Materials under Different Working Conditions. Materials for Mechanical Engineering.
  184. Guangxiong Chen, Hongjuan Yang, Weihua Zhang, Yu-Ting Lu, Saidan Zhang, Zhongrong Zhou (2013). Effect of the strip inclination angle on the friction and wear behavior of contact strip against contact wire with electric current. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  185. D.W. Wang, Jiliang Mo, Z.G. Wang, G.X. Chen, Huajiang Ouyang, Zhongrong Zhou (2013). Numerical study of friction-induced vibration and noise on groove-textured surface. Tribology International.DOI
  186. Wangping Qian, G.X. Chen, Zhongrong Zhou (2013). Dynamic transient analysis of squealing vibration of a reciprocating sliding system. Wear.DOI
  187. Jing Zheng, L.Q. Weng, Mingzhao Shi, Jianzhong Zhou, Licheng Hua, Linmao Qian, Zhongrong Zhou (2013). Effect of water content on the nanomechanical properties and microtribological behaviour of human tooth enamel. Wear.DOI
  188. 张晓宇,任平弟,钟发春,朱旻昊,周仲荣(2012). 0Cr20Ni32AlTi合金的高温微动磨损及摩擦氧化特性(英文). Transactions of Nonferrous Metals Society of China.
  189. 李炜,蒋玉石,庞强,翟正绘,周仲荣(2012). 不同性别人体皮肤摩擦不舒适度感知功能的研究. 《摩擦学学报(中英文)》.
  190. 李刚,金城,陈光雄,周仲荣(2012). 摩擦振动引起的波状磨耗的试验研究. 《润滑与密封》.
  191. 张捷,肖新标,王谛,周仲荣,金学松(2012). 350km/h以上高速列车观光区噪声特性及其评价研究. 《铁道学报》.
  192. 曾飞,陈光雄,周仲荣(2012). 缩比模型轮对与原型轮对过盈配合面微动幅值的相似关系. 《上海交通大学学报》.
  193. Zhou Zhong-rong (2012). Discomfort Perception on Human Skin among Different Gender During Friction Contact. Tribology.
  194. Long Hua, Bingjun Yu, Chenfei Song, Linmao Qian, Zhongrong Zhou (2012). Nanotribological behaviors of friction-induced hillocks on monocrystalline silicon. International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
  195. Jian Wei Guo, Chenfei Song, Xiaoying Li, Bingjun Yu, Hanshan Dong, Linmao Qian, Zhongrong Zhou (2012). Fabrication mechanism of friction-induced selective etching on Si(100) surface. Nanoscale Research Letters.DOI
  196. Liang Zheng, Yadong Li, Jing Zheng, M. Wen, Y.F. Zhang, Linmao Qian, Zhongrong Zhou (2012). A comparative study on the sliding wear behaviors of human tooth enamel, Cu–Zn alloy and Al2O3 ceramic. Wear.DOI
  197. Y.F. Zhang, Jing Zheng, Liang Zheng, X.Y. Shi, Linmao Qian, Zhongrong Zhou (2012). Effect of adsorption time on the lubricating properties of the salivary pellicle on human tooth enamel. Wear.DOI
  198. Wei Li, Qiang Pang, Yushi Jiang, Zhenghui Zhai, Zhongrong Zhou (2012). Study of Physiological Parameters and Comfort Sensations During Friction Contacts of the Human Skin. Tribology Letters.DOI
  199. Dan Yang, Shuxin Qu, Sunzhong Lin, Jie Ju Huang, Rong Fu, Zhongrong Zhou (2012). Preliminary study on the effect of wear process on drug release of ALN-loaded UHMWPE. Applied Surface Science.DOI
  200. Jing Zheng, Yang Li, Mingzhao Shi, Y.F. Zhang, Linmao Qian, Zhongrong Zhou (2012). Microtribological behaviour of human tooth enamel and artificial hydroxyapatite. Tribology International.DOI
  201. Jiaxin Yu, Seong H. Kim, Bingjun Yu, Linmao Qian, Zhongrong Zhou (2012). Role of Tribochemistry in Nanowear of Single-Crystalline Silicon. ACS Applied Materials & Interfaces.DOI
  202. 林修洲,朱旻昊,莫继良,陈光雄,金学松,周仲荣(2011). 碳/铜载流滑动摩擦过程中摩擦学与电弧行为(英文). Transactions of Nonferrous Metals Society of China.
  203. 刘海萍,王彩芸,申鹏,刘启跃,周仲荣(2011). 轮轨粘着面积的数值研究. 《机械设计》.
  204. 郑靖,郑良,石茂渝,钱林茂,周仲荣(2011). 再矿化对人牙釉质酸蚀磨损的抑制与修复作用. 《青年摩擦学者与“十二五”发展——2011年全国青年摩擦学与表面工程学术会议》.
  205. 单欢乐,莫继良,陈光雄,邵天敏,周仲荣(2011). 沟槽形表面织构对摩擦噪声的影响. 《青年摩擦学者与“十二五”发展——2011年全国青年摩擦学与表面工程学术会议》.
  206. 任元,莫继良,朱旻昊,周仲荣(2011). AlCrN涂层转动微动摩擦学行为. 《中国表面工程》.
  207. 郑靖,李彦,石茂渝,钱林茂,周仲荣(2011). 人牙釉质与合成羟基磷灰石微观摩擦学性能的对比研究. 《青年摩擦学者与“十二五”发展——2011年全国青年摩擦学与表面工程学术会议》.
  208. 金学松,凌亮,肖新标,朱旻昊,周仲荣(2011). 复杂环境下高速列车动态行为数值仿真和运行安全域分析. 《计算机辅助工程》.
  209. 陈光雄,金学松,邬平波,戴焕云,周仲荣(2011). 车轮多边形磨耗机理的有限元研究. 《铁道学报》.
  210. 徐传来,米彩盈,周仲荣(2011). 基于APDL语言的车轮参数化形状优化. 《铁道学报》.
  211. Dan Yang, Shuxin Qu, Jie Ju Huang, Zhenbing Cai, Zhongrong Zhou (2011). Characterization of alendronate sodium-loaded UHMWPE for anti-osteolysis in orthopedic applications. Materials Science and Engineering C.DOI
  212. Chenfei Song, Xiaoying Li, Bingjun Yu, Hanshan Dong, Linmao Qian, Zhongrong Zhou (2011). Friction-induced nanofabrication method to produce protrusive nanostructures on quartz. Nanoscale Research Letters.DOI
  213. Xiuzhou Lin, Min-hao ZHU, Jiliang Mo, Guangxiong Chen, Xuesong Jin, Zhongrong Zhou (2011). Tribological and electric-arc behaviors of carbon/copper pair during sliding friction process with electric current applied. Transactions of Nonferrous Metals Society of China.DOI
  214. Zhou Zhong-rong (2011). Finite Element Study on the Generation Mechanism of Polygonal Wear of Railway Wheels. Journal of the China Railway Society.
  215. Zhou Zhong-rong (2011). Dynamic behaviour numerical simulation and safety boundary analysis for high speed trains in severe environments. Computer-aided engineering.
  216. Zhou Zhong-rong (2011). Numerical study on adhesion area of wheel-rail. Journal of Machine Design.
  217. Zhou Zhong-rong (2011). Wheel Shape & Parameter Optimization Based on APDL Language. Journal of the China Railway Society.
  218. Zhou Zhong-rong (2011). Rotational Fretting Behaviour of AlCrN Coating. China Surface Engineering.
  219. Fei Zeng, Zhenbing Cai, Zhi‐Qiang Feng, Zhongrong Zhou (2011). In situ observation and analysis of a shrink-fitted PMMA shaft subjected to rotating bending. Tribology International.DOI
  220. Wen Li, S.X. Qu, Yu Zheng, Qingdong Pang, Jing Zheng, Zhongrong Zhou (2011). Skin self-adaptation to friction trauma under reciprocal sliding conditions. Tribology International.DOI
  221. Lei Chen, Mingchu Yang, Jiaxin Yu, Linmao Qian, Zhongrong Zhou (2011). Nanofretting behaviours of ultrathin DLC coating on Si(100) substrate. Wear.DOI
  222. Jing Zheng, Her‐Hsiung Huang, Mingzhao Shi, Liang Zheng, Linmao Qian, Zhongrong Zhou (2011). In vitro study on the wear behaviour of human tooth enamel in citric acid solution. Wear.DOI
  223. Shucan Zheng, Jing Zheng, Shumei Gao, Bingjun Yu, Haiyang Yu, Linmao Qian, Zhongrong Zhou (2011). Investigation on the microtribological behaviour of human tooth enamel by nanoscratch. Wear.DOI
  224. X.D. Wang, Jiaxin Yu, Longfei Chen, Linmao Qian, Zhongrong Zhou (2011). Effects of water and oxygen on the tribochemical wear of monocrystalline Si(100) against SiO2 sphere by simulating the contact conditions in MEMS. Wear.DOI
  225. Liang Zheng, Jing Zheng, L.Q. Weng, Linmao Qian, Zhongrong Zhou (2011). Effect of remineralization on the nanomechanical properties and microtribological behaviour of acid-eroded human tooth enamel. Wear.DOI
  226. Jinling Liu, Hanshan Dong, Joseph Buhagiar, Chenfei Song, Bingjun Yu, Linmao Qian, Zhongrong Zhou (2011). Effect of low-temperature plasma carbonitriding on the fretting behaviour of 316LVM medical grade austenitic stainless steels. Wear.DOI
  227. W. Li, X.D. Liu, Zhenbing Cai, Jing Zheng, Zhongrong Zhou (2011). Effect of prosthetic socks on the frictional properties of residual limb skin. Wear.DOI
  228. Minhao Zhu, Zhongrong Zhou (2011). On the mechanisms of various fretting wear modes. Tribology International.DOI
  229. W. Zhong, Jia Hu, Zheyu Li, Q.Y. Liu, Zhongrong Zhou (2011). A study of rolling contact fatigue crack growth in U75V and U71Mn rails. Wear.DOI
  230. 古柏林,刘捍卫,朱旻昊,张鹏程,周仲荣(2010). TiN/Ti复合涂层高温微动磨损特性研究. 《第八届全国表面工程学术会议暨第三届青年表面工程学术论坛论文集(四)》.
  231. 王艳,周仲荣(2010). 钛合金表面非平衡磁控溅射制备TiN薄膜的冲击磨损性能. 《中国表面工程》.
  232. 张晓宇,任平弟,张亚非,朱昊,周仲荣(2010). Incoloy800合金的高温微动磨损特性. 《中国有色金属学报》.
  233. 廖正君,莫继良,郑健峰,杨皎,周仲荣,朱旻昊(2010). LZ50车轴钢转动微动摩擦学特性研究. 《机械强度》.DOI
  234. 董霖,陈光雄,周仲荣(2010). 载流磨损的最佳法向载荷三维关系模型研究. 《机械设计与制造》.
  235. 罗荣,冯波,屈树新,鲁雄,陈建敏,周仲荣(2010). 不同管径氧化钛纳米管层的微动磨损性能. 《摩擦学学报(中英文)》.DOI
  236. 徐小军,刘捍卫,朱旻昊,邱绍宇,周仲荣(2010). Ti-Al-Zr钛合金的高温微动磨损行为研究. 《核动力工程》.
  237. 黄梦妮,曾飞,周仲荣(2010). 轮轴过盈配合面损伤分析及对策. 《铁道机车车辆》.
  238. Zhou Zhong-rong, Rob S. Dwyer-Joyce (2010). Guest Editorial. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  239. Zhou Zhong-rong (2010). Analysis and Countermeasure of Fretting Damage on Wheel/Axle Interface. Railway Locomotive & Car.
  240. Zhou Zhong-rong (2010). Influence of Material on Rail Contact Fatigue Damage and Research on High-speed Rail Selection.
  241. Jun Peng, Chenfei Song, Mingxue Shen, Jianfeng Zheng, Zhongrong Zhou, Minhao Zhu (2010). An experimental study on bending fretting fatigue characteristics of 316L austenitic stainless steel. Tribology International.DOI
  242. Zhenbing Cai, Shanshan Gao, Min-hao Zhu, Juan Liu, Huoming Shen, Haiyang Yu, Zhongrong Zhou (2010). Investigation of micro-cracking behaviors of human femur cortical bone during radial fretting. Tribology International.DOI
  243. Jiaxin Yu, Shuang Zhang, Linmao Qian, Jun Xu, Wangyu Ding, Zhongrong Zhou (2010). Radial nanofretting behaviors of ultrathin carbon nitride film on silicon substrate. Tribology International.DOI
  244. Varaprasad Katta Clement, Jiliang Mo, Minhao Zhu, Mingxue Shen, Zhongrong Zhou (2010). Research on the Rotational Fretting Wear of Ti6Al4V Alloy against Silicon Nitride. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  245. Wei Peng, Linmao Qian, Jing Zheng, Zhongrong Zhou (2010). Effect of Water on the Mechanical and Frictional Behaviors of Human Fingernails. Tribology Letters.DOI
  246. Bingjun Yu, Linmao Qian, Hanshan Dong, Jiaxin Yu, Zhongrong Zhou (2010). Friction-induced hillocks on monocrystalline silicon in atmosphere and in vacuum. Wear.DOI
  247. G. X. Chen, Zhongrong Zhou (2010). A New Mechanism for Squealing Noise and Friction-Induced Vibrations in the Railway Industry. STLE/ASME International Joint Tribology Conference (IJTC).DOI
  248. 王泽爱,周仲荣(2009). 四种合成油微动磨损性能比较研究. 《摩擦学学报(中英文)》.
  249. 屈金山,周仲荣(2009). Domex 700MC钢焊接接头的微动磨损性能. 《机械工程材料》.
  250. 肖枫,郑靖,周仲荣,钱林茂(2009). 人牙釉质的酸蚀行为研究. 《摩擦学学报(中英文)》.DOI
  251. 赵雪芹,王文健,钟雯,刘启跃,朱旻昊,周仲荣(2009). 钢轨滚动疲劳裂纹与磨损耦合关系研究. 《铁道学报》.
  252. 王泽爱,周仲荣,陈国需(2009). 脲基脂润滑下钢材料的微动磨损. 《石油学报(石油加工)》.
  253. 丁涛,陈光雄,卜俊,周仲荣(2009). 载流摩擦磨损中不同放电现象的机理研究. 《中国铁道科学》.
  254. 董霖,陈光雄,周仲荣(2009). 电极性对地铁第三轨摩擦磨损行为的影响. 《中国铁道科学》.
  255. 董霖,陈光雄,周仲荣(2009). 加载系统刚度对第三轨受电摩擦磨损特性的影响. 《润滑与密封》.
  256. 王泽爱,周仲荣(2009). 润滑剂减缓微动磨损研究进展. 《润滑与密封》.
  257. 董霖,陈光雄,周仲荣(2009). 载流摩擦磨损系统研究. 《润滑与密封》.
  258. 王艳,周仲荣(2009). TC4合金冲击磨损性能与机制的研究. 《润滑与密封》.
  259. 马磊,刘捍卫,朱旻昊,邱绍宇,周仲荣(2009). 等离子喷涂WC-12Co涂层滑移区高温微动磨损特性研究. 《润滑与密封》.
  260. 陈光雄,戴焕云,曾京,周仲荣(2009). 摩擦尖叫噪声有限元预测分析的可靠性研究. 《润滑与密封》.
  261. 金学松,郭俊,肖新标,温泽峰,周仲荣(2009). 高速列车安全运行研究的关键科学问题. 《工程力学》.
  262. 陈光雄,戴焕云,曾京,周仲荣(2009). 车轮双侧踏面制动尖叫噪声和颤振的有限元分析. 《工程力学》.
  263. Zhou Zhong-rong (2009). Comparative Study of Fretting Wear Behavior of Four Types of Synthetic Lubricating Oils. Tribology.
  264. Bingjun Yu, Hanshan Dong, Linmao Qian, Yunfei Chen, Jiaxin Yu, Zhongrong Zhou (2009). Friction-induced nanofabrication on monocrystalline silicon. Nanotechnology.DOI
  265. Linmao Qian, Shuang Zhang, Dongyang Li, Zhongrong Zhou (2009). Spherical indentation for determining the phase transition properties of shape memory alloys. Journal of materials research/Pratt's guide to venture capital sources.DOI
  266. Zhou Zhong-rong (2009). A FINITE ELEMENT ANALYSIS OF THE SQUEAL AND CHATTER PROPENSITY FOR A DOUBLE PADS-WHEEL BRAKE SYSTEM. Engineering Mechanics.
  267. Zhou Zhong-rong (2009). Effects of the Polarity on the Friction and Wear of the Third Rail in Subway. Zhongguo tiedao kexue.
  268. Jing Zheng, F. Xiao, Liang Zheng, Linmao Qian, Zhongrong Zhou (2009). Erosion behaviors of human tooth enamel at different depth. Tribology International.DOI
  269. Jing Zheng, Yi Ting Huang, Linmao Qian, Zhongrong Zhou (2009). Nanomechanical properties and microtribological behaviours of human tooth enamel. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  270. Zhenbing Cai, Min-hao Zhu, Zhongrong Zhou (2009). An experimental study torsional fretting behaviors of LZ50 steel. Tribology International.DOI
  271. Shanshan Gao, Shengbin Huang, Linmao Qian, Haiyang Yu, Zhongrong Zhou (2009). Wear behavior of early carious enamel before and after remineralization. Wear.DOI
  272. Zhenbing Cai, Minhao Zhu, Huoming Shen, Zhongrong Zhou, Xuesong Jin (2009). Torsional fretting wear behaviour of 7075 aluminium alloy in various relative humidity environments. Wear.DOI
  273. Jiaxin Yu, Linmao Qian, Bingjun Yu, Zhongrong Zhou (2009). Nanofretting behaviors of monocrystalline silicon (100) against diamond tips in atmosphere and vacuum. Wear.DOI
  274. Zhenbing Cai, Min-hao Zhu, Jianfeng Zheng, Xuesong Jin, Zhongrong Zhou (2009). Torsional fretting behaviors of LZ50 steel in air and nitrogen. Tribology International.DOI
  275. Linmao Qian, Jingyi Zhang, Zhongrong Zhou (2009). Radial nanofretting behavior of four typical structural materials in MEMS under high loads. Tribology International.DOI
  276. Jing Zheng, F. Xiao, Linmao Qian, Zhongrong Zhou (2009). Erosion behavior of human tooth enamel in citric acid solution. Tribology International.DOI
  277. 周仲荣(2008). 关于工程耐磨系统设计的思考. 《第七届全国表面工程学术会议暨第二届表面工程青年学术论坛论文集(一)》.
  278. 蔡振兵,朱旻昊,俞佳,周仲荣(2008). 扭动微动的模拟及其试验研究. 《摩擦学学报(中英文)》.
  279. 董霖,陈光雄,朱旻昊,周仲荣(2008). 支撑刚度对载流摩擦磨损特性的影响. 《交通运输工程学报》.
  280. 孔梅,李炜,李海丽,刘夕东,周仲荣(2008). 四种常用假肢材料与人体皮肤摩擦学特性的研究. 《生物医学工程学杂志》.
  281. 尹晓利,任平弟,蔡振兵,朱旻昊,周仲荣(2008). Hank’s溶液和生理盐水中纯钛的复合微动腐蚀特性. 《中国有色金属学报》.
  282. 薛峰,周仲荣(2008). AZ91D镁合金在水介质下的冲击磨损特性研究. 《机械》.
  283. 李海丽,陈光雄,周仲荣(2008). 微晶玻璃/H300铸铁、45#钢低速摩擦学性能试验研究. 《润滑与密封》.
  284. 李炜,孔梅,刘夕东,周仲荣(2008). 汗液对皮肤摩擦特性的影响研究. 《摩擦学学报(中英文)》.DOI
  285. 董光能,张俊锋,杨华斌,周仲荣,谢友柏(2008). 激光微凸化超弹TiNi合金表面摩擦学性能. 《稀有金属材料与工程》.
  286. 刘启跃,王文健,钟雯,周仲荣(2008). 钢轨分级使用的试验研究. 《2008年中国机械工程学会年会暨甘肃省学术年会》.
  287. 朱旻昊,蔡政兵,莫继良,林修洲,周仲荣(2008). 微动磨损的研究进展. 《2008年中国机械工程学会年会暨甘肃省学术年会》.
  288. 郭林茂,王泽爱,周仲荣(2008). 干态及脂润滑条件下微动磨损白层的对比研究. 《中国表面工程》.
  289. 李炜,屈树新,孔梅,周仲荣(2008). 摩擦对兔皮肤损伤的研究. 《生物医学工程学杂志》.
  290. 蔡振兵,朱旻昊,高姗姗,于海洋,周仲荣(2008). 人股骨密质骨横断面径向微动行为. 《上海交通大学学报》.
  291. Zhou Zhong-rong (2008). Experimental Investigation and Simulation of Tortional Fretting Mode. Tribology.
  292. Zhou Zhong-rong (2008). The impact wear behavior of AZ91D magnesium alloys in de-ionized water. Modern Machinery.
  293. Zhenbing Cai, Minhao Zhu, Haiyang Yu, Huoming Shen, Qian Huang, Zhongrong Zhou (2008). Radial fretting damage behavior of human femur cortical bone and fem analysis. Journal of Biotechnology.DOI
  294. Jia Yu, Zhenbing Cai, Minhao Zhu, Shuxin Qu, Zhongrong Zhou (2008). Study on torsional fretting behavior of UHMWPE. Applied Surface Science.DOI
  295. Aiqin Liu, Shuxin Qu, Mengmeng Chao, Minhao Zhu, Jie Weng, Zhongrong Zhou (2008). UHMWPE carrying estradiol to treat the particle‐induced osteolysis—Processing and characterizing. Journal of Biomedical Materials Research Part A.DOI
  296. Zhongrong Zhou, Jing Zheng (2008). Tribology of dental materials: a review. Journal of Physics D Applied Physics.DOI
  297. Zhou Zhong-rong (2008). STABILITY OF A SQUEALING NOISE MODEL WITH TIME DELAY. Zhendong yu chongji.
  298. Zhou Zhong-rong (2008). A Comparative Study of White Layer on Fretting Wear under Dry Condition and Grease Lubrication. China Surface Engineering.
  299. Jiaxin Yu, Linmao Qian, Bingjun Yu, Zhongrong Zhou (2008). Nanofretting Behavior of Monocrystalline Silicon (100) Against SiO2 Microsphere in Vacuum. Tribology Letters.DOI
  300. Bingjun Yu, Linmao Qian, Jiaxin Yu, Zhongrong Zhou (2008). Effects of Tail Group and Chain Length on the Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum. Tribology Letters.DOI
  301. Linmao Qian, Qingping Sun, Zhongrong Zhou (2008). The role of martensite reorientation in the fretting behaviour of nickel titanium shape memory alloy. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  302. Wen Li, Mei Kong, X.D. Liu, Zhongrong Zhou (2008). Tribological behavior of scar skin and prosthetic skin in vivo. Tribology International.DOI
  303. 蔡立君,王艳,周仲荣(2007). ZM5镁合金冲击磨损行为研究. 《润滑与密封》.
  304. 林修洲,朱旻昊,陈光雄,张卫华,周仲荣(2007). 高速电气化铁路弓/网系统的摩擦磨损研究进展. 《润滑与密封》.
  305. 屈金山,张晖,周仲荣(2007). 不锈钢焊接区金属微动磨损行为研究. 《润滑与密封》.
  306. 张晖,周仲荣(2007). ZM5镁合金微动磨损特性研究. 《润滑与密封》.
  307. 朱旻昊,徐进,周仲荣(2007). 抗微动损伤的表面工程设计. 《中国表面工程》.
  308. 屈金山,张晖,周仲荣(2007). 滑移区内不同堆焊层熔敷金属的微动摩擦磨损性能研究. 《摩擦学学报(中英文)》.
  309. 屈金山,张晖,周仲荣(2007). 焊缝金属微动磨损性能研究. 《焊接》.
  310. 刘启跃,王文健,周仲荣(2007). 高速与重载铁路钢轨损伤及预防技术差异研究. 《润滑与密封》.
  311. 周丹,郑靖,周仲荣(2007). 食物粒度和硬度对人牙釉质三体磨粒磨损特性的影响. 《润滑与密封》.
  312. 王艳,石心余,蔡立君,周仲荣(2007). 新型小载荷冲击磨损试验机的研制及其实验研究. 《摩擦学学报(中英文)》.DOI
  313. 董霖,陈光雄,朱旻昊,周仲荣(2007). 地铁钢铝复合式第三轨/受电靴载流摩擦磨损特性研究. 《摩擦学学报(中英文)》.DOI
  314. 李炜,屈树新,周仲荣(2007). 不同年龄、性别和解剖部位人体皮肤摩擦特性的研究. 《生物医学工程学杂志》.
  315. Zhou Zhong-rong (2007). PREDICTION OF FRICTION SQUEAL USING FINITE ELEMENT METHOD. Chinese Journal of Mechanical Engineering.
  316. Xuesong Jin, Zefeng Wen, Xinbiao Xiao, Zhongrong Zhou (2007). A numerical method for prediction of curved rail wear. Multibody System Dynamics.DOI
  317. Linmao Qian, Zhongrong Zhou, Qingping Sun, Wenyi Yan (2007). Nanofretting behaviors of NiTi shape memory alloy. Wear.DOI
  318. Jing Zheng, Zhongrong Zhou (2007). Study of in vitro wear of human tooth enamel. Tribology Letters.DOI
  319. 郑靖,周丹,周仲荣(2006). 人牙釉质的磨损机制研究. 《润滑与密封》.
  320. 梁爽,陈光雄,戴繁云,曾京,周仲荣(2006). 四种车辆制动闸瓦材料摩擦特性试验研究. 《润滑与密封》.
  321. 雷斌,朱旻昊,莫继良,徐轶,周仲荣(2006). TiAlN涂层往复滑动的摩擦学性能研究. 《润滑与密封》.
  322. 王勇,任平弟,朱旻昊,周仲荣(2006). Ti6Al4V合金在Saline溶液中的微动腐蚀特性. 《润滑与密封》.
  323. 任平弟,王勇,张鹏,朱旻昊,陈光雄,周仲荣(2006). 水膜及油水混合膜对GCr15钢微动磨损行为的影响. 《润滑与密封》.
  324. 蔡振兵,朱旻昊,刘军,徐轶,俞佳,周仲荣(2006). 激光熔覆Ni60和Co-Cr-W合金层的高温磨损特性研究. 《润滑与密封》.
  325. 董霖,李丰学,陈光雄,周仲荣(2006). 有无电流工况下钢铝复合轨/受电靴的摩擦磨损特性. 《润滑与密封》.
  326. 陈光雄,戴焕云,曾京,周仲荣(2006). 摩擦噪声系统的振动特性研究. 《润滑与密封》.
  327. 梁爽,陈光雄,戴焕云,曾京,周仲荣(2006). 制动颤振的试验研究. 《润滑与密封》.
  328. 黄鹍鹏,刘捍卫,朱旻昊,邱绍宇,周仲荣(2006). TiAlZr合金微动磨损性能研究. 《润滑与密封》.
  329. 林修洲,朱旻昊,陈光雄,张卫华,周仲荣(2006). 高速电气化铁路弓/网系统的摩擦磨损研究进展. 《2006全国摩擦学学术会议》.
  330. 郑靖,周仲荣(2006). 四种牙科高分子修复材料摩擦学行为的对比研究. 《润滑与密封》.
  331. 李炜,石心余,吴乐轩,周仲荣(2006). 新型皮肤摩擦特性测量装置的实验研究. 《摩擦学学报(中英文)》.DOI
  332. 周仲荣(2006). 摩擦学发展前沿. 《科学出版社》.
  333. 徐轶,朱旻昊,莫继良,雷斌,周仲荣(2006). 两种TiAlN涂层的往复滑动摩擦学性能研究. 《中国表面工程》.
  334. 张静宜,钱林茂,周仲荣(2006). 高载下单晶铜和单晶硅的径向纳动与损伤行为研究. 《摩擦学学报(中英文)》.
  335. 莫继良,朱旻昊,安剑,雷斌,周仲荣(2006). 物理气相沉积CrN涂层的研究进展. 《第六届全国表面工程学术会议论文集》.
  336. 任平弟,王勇,朱旻昊,周仲荣(2006). 阴极极化对滑移区微动腐蚀行为的影响. 《材料研究学报》.
  337. Zhou Zhong-rong (2006). Radial Nanofretting of Single Crystal Copper and Silicon under High Load. Tribology.
  338. Zhou Zhong-rong (2006). TIME-FREQUENCY CHARACTERISTICS OF FRICTION-INDUCED VIBRATION. Chinese Journal of Mechanical Engineering.
  339. Zhou Zhong-rong (2006). A New Skin Frictional Property Testing Apparatus. Tribology.
  340. Hui Min Yang, Linmao Qian, Zhongrong Zhou, Xinhua Ju, Hanshan Dong (2006). Effect of surface treatment by ceramic conversion on the fretting behavior of NiTi shape memory alloy. Tribology Letters.DOI
  341. Jiang Xu, Zhongrong Zhou, C.H. Zhang, Minhao Zhu, Jianbin Luo (2006). An investigation of fretting wear behaviors of bonded solid lubricant coatings. Journal of Materials Processing Technology.DOI
  342. Wen Li, S. X. Qu, Zhongrong Zhou (2006). Reciprocating sliding behaviour of human skin in vivo at lower number of cycles. Tribology Letters.DOI
  343. Zhongrong Zhou, Jing Zheng (2006). Oral tribology. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  344. Jing Zheng, Zhongrong Zhou (2006). Friction and wear behavior of human teeth under various wear conditions. Tribology International.DOI
  345. Minhao Zhu, Hai Yang Yu, Zhongrong Zhou (2006). Radial fretting behaviours of dental ceramics. Tribology International.DOI
  346. Haiyang Yu, Z.B. Cai, Pingdi Ren, Minghao Zhu, Zhongrong Zhou (2006). Friction and wear behavior of dental feldspathic porcelain. Wear.DOI
  347. Zhongrong Zhou, K. Nakazawa, Minhao Zhu, N. Maruyama, Ph. Kapsa, Ludovic Vincent (2006). Progress in fretting maps. Tribology International.DOI
  348. 黄学文,董光能,周仲荣,谢友柏(2005). 金属摩擦副干滑动摩擦噪声机理研究. 《润滑与密封》.
  349. 于海洋,蔡振兵,朱旻昊,周仲荣(2005). 人股骨皮质骨轴面微动摩擦磨损特性研究. 《机械工程学报》.
  350. 王文健,刘启跃,周仲荣(2005). 车轮钢滚动剥离摩擦磨损特性研究. 《摩擦学学报(中英文)》.
  351. 黄伟九,侯滨,庞佑霞,张津,周仲荣(2005). 两种压铸镁合金的微动磨损行为研究. 《摩擦学学报(中英文)》.
  352. 任平弟,朱旻昊,赵婧,杜润,周仲荣(2005). 水介质对0Cr18Ni9不锈钢微动运行特性的影响. 《机械工程材料》.
  353. 郑华,陈光雄,周仲荣(2005). 在往复滑动条件下摩擦噪声发生时磨痕形貌的观察. 《润滑与密封》.
  354. 刘捍卫,黄鹍鹏,朱旻昊,邱绍宇,周仲荣(2005). TiAlZr合金及其热喷涂Ni-Cr合金涂层高温微动磨损的研究. 《核动力工程》.
  355. 刘捍卫,邱绍宇,朱旻昊,黄鹍鹏,周仲荣(2005). 1Cr13不锈钢部分滑移区和滑移区的高温微动磨损特性. 《核动力工程》.
  356. 刘捍卫,邱绍宇,周彤,黄鵾鹏,朱旻昊,周仲荣(2005). TiC/Ti(C,N)/TiN复合涂层在滑移区的高温微动磨损特性. 《核动力工程》.
  357. 王勇,任平弟,朱旻昊,于海洋,周仲荣(2005). 纯钛在蒸馏水和Saline溶液中的微动腐蚀行为. 《上海交通大学学报》.
  358. 朱旻昊,周仲荣,刘启跃,张文桂,闫开印,蒋葛夫(2005). 建立本科生科研和工程实践体系的成功探索. 《高等工程教育研究》.
  359. 熊芳,于海洋,廖运茂,朱智敏,周仲荣,朱昊(2005). 冲蚀对牙科氧化铝渗透陶瓷强度的影响. 《生物医学工程学杂志》.
  360. Zhou Zhong-rong (2005). Study on Friction and Wear Properties of Wheel Steel under Rolling-Sliding Condition. Tribology.
  361. Linmao Qian, Hui Min Yang, Minhao Zhu, Zhongrong Zhou (2005). Experimental Verification of the Strain-Gradient Plasticity Model for Indentation. Journal of materials research/Pratt's guide to venture capital sources.DOI
  362. Jing Zheng, Zhongrong Zhou (2005). Effect of age on the friction and wear behaviors of human teeth. Tribology International.DOI
  363. Weijiu Huang, Bin Hou, Youxia Pang, Zhongrong Zhou (2005). Fretting wear behavior of AZ91D and AM60B magnesium alloys. Wear.DOI
  364. Linmao Qian, Zhongrong Zhou, Qingping Sun (2005). The role of phase transition in the fretting behavior of NiTi shape memory alloy. Wear.DOI
  365. Q.Y. Liu, Xuesong Jin, Zhongrong Zhou (2005). An investigation of friction characteristic of steels under rolling–sliding condition. Wear.DOI
  366. 朱昊,李政,周仲荣(2004). 低碳钢的复合微动磨损特性研究. 《材料工程》.
  367. 黄学文,董光能,周仲荣,谢友柏(2004). 应变速率对TiNi形状记忆合金压缩力学行为的影响. 《中国有色金属学报》.
  368. 郑靖,于海洋,周仲荣(2004). 天然牙和树脂牙体外三体磨粒磨损性能研究. 《摩擦学学报(中英文)》.
  369. 郑靖,石心余,周仲荣(2004). 人牙釉质在人工唾液润滑下与不同偶件对摩时的摩擦学性能研究. 《摩擦学学报(中英文)》.DOI
  370. 于海洋,周仲荣,何立弘,朱旻昊,郑靖(2004). 表面处理工艺对长石质牙科陶瓷摩擦学特性的影响. 《摩擦学学报(中英文)》.DOI
  371. 周仲荣(2004). 复合微动磨损. 《上海交通大学出版社》.
  372. 王勇,任平弟,刘家浚,周仲荣(2004). “摩圣”(PBC)技术及其摩擦磨损特性. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
  373. 于海洋,蔡振兵,朱旻昊,周仲荣(2004). 人股骨密质骨横断面的微动磨损特性研究. 《摩擦学学报(中英文)》.
  374. 徐进,朱旻昊,周仲荣(2004). 粘结石墨固体润滑涂层微动磨损性能研究. 《机械工程材料》.
  375. 郑靖,沙伟,周仲荣(2004). 不同年龄段天然牙的摩擦磨损行为研究. 《摩擦学学报(中英文)》.
  376. 黄伟九,陈安华,侯滨,曾荣昌,周仲荣,孙智富(2004). AM60B镁合金在滑移区的微动磨损行为研究. 《武汉理工大学学报》.
  377. 任平弟,朱旻昊,周仲荣(2004). 不同水介质下GCr15/45#钢微动腐蚀行为研究. 《润滑与密封》.
  378. 任平弟,朱旻昊,周仲荣(2004). 油、水介质对GCr15钢微动磨损特性的影响. 《西安交通大学学报》.
  379. 侯滨,黄伟九,陈波水,周仲荣(2004). AZ91D和AM60B镁合金微动图的研究. 《润滑与密封》.
  380. 侯滨,黄伟九,陈波水,周仲荣,李春生(2004). AZ91D镁合金滑移区域微动磨损机理研究. 《摩擦学学报(中英文)》.
  381. 徐进,朱旻昊,陈建敏,周惠娣,周仲荣(2004). 三种粘结固体润滑涂层微动磨损性能比较研究. 《摩擦学学报(中英文)》.
  382. 朱旻昊,周仲荣(2004). 微动白层形成的控制因素及其对磨损过程的影响. 《摩擦学学报(中英文)》.
  383. 李炜,郑靖,屈树新,周仲荣(2004). 关于皮肤摩擦学特性的研究. 《润滑与密封》.
  384. 黄学文,董光能,周仲荣,谢友柏(2004). TiNi合金的耐磨机制及其摩擦学应用研究. 《材料工程》.
  385. 黄学文,杨华斌,董光能,周仲荣,谢友柏(2004). TiNi合金轴向压缩动载荷下的超弹性研究. 《钛工业进展》.
  386. 金学松,温泽峰,张卫华,曾京,周仲荣,刘启跃(2004). 世界铁路发展状况及其关键力学问题 全国结构工程学术会议特邀报告. 《工程力学》.
  387. 金学松,温泽峰,张卫华,曾京,周仲荣,刘启跃(2004). 世界铁路发展状况及其关键力学问题. 《工程力学学术研讨会》.
  388. 金学松,温泽峰,张卫华,曾京,周仲荣,刘启跃(2004). 世界铁路发展状况及其关键力学问题——全国结构工程学术会议特邀报告. 《第十三届全国结构工程学术会议论文集(第Ⅰ册)》.
  389. 刘启跃,朱旻昊,周仲荣,吴鹿鸣(2004). 开展科研实践 培养创新能力. 《实验室研究与探索》.
  390. 姚新胜,黄洪钟,周仲荣(2004). 机械满意优化中满意度函数的建立方法. 《机械科学与技术》.
  391. Zhongrong Zhou (2004). ON BIO-TRIBOLOGY IN CHINA.DOI
  392. Zhou Zhong-rong (2004). Tribological Behavior of Natural Teeth of Different Ages. Tribology.
  393. Zhou Zhong-rong (2004). Factors Controlling White Layer Initiation in Fretting and the Effect on Wear Process. Tribology.
  394. Huang Xue-wen, Dong Guang-neng, Zhou Zhong-rong, Xie You-bai (2004). The deformation behavior of TiNi shape memory alloy under axial dynamic compression. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  395. Zhou Zhong-rong (2004). Composite Fretting Wear of Low Carbon Steel. Cailiao gongcheng.
  396. Zhou Zhong-rong (2004). Fretting Wear Behavior of Bonded Graphite Solid Lubrication Coating. Materials for Mechanical Engineering.
  397. Linmao Qian, Ming Li, Zhongrong Zhou, Hui Min Yang, Xinyu Shi (2004). Comparison of nano-indentation hardness to microhardness. Surface and Coatings Technology.DOI
  398. Jingmang Xu, Minhao Zhu, Zhongrong Zhou (2004). Fretting wear behavior of PTFE-based bonded solid lubrication coatings. Thin Solid Films.DOI
  399. Xuesong Jin, Weihua Zhang, Jing Zeng, Zhongrong Zhou, Qingjie Liu, Zefeng Wen (2004). Adhesion experiment on a wheel/rail system and its numerical analysis. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
  400. 郑靖,周仲荣(2003). 天然牙釉质/纯钛摩擦磨损行为的研究. 《润滑与密封》.
  401. 张杰,黎红,周仲荣,郑靖(2003). 柠檬酸对牙釉质和塑料义齿耐磨性影响的研究. 《润滑与密封》.
  402. 朱旻昊,周仲荣(2003). GCr15轴承钢的复合微动磨损行为研究. 《机械工程材料》.
  403. 徐进,朱旻昊,江晓禹,沈永平,周仲荣(2003). 柴油机连杆齿形配合面裂纹成因研究. 《机械工程材料》.
  404. 朱旻昊,罗唯力,周仲荣(2003). 表面工程技术抗微动损伤的研究现状. 《机械工程材料》.
  405. 刘启跃,张波,周仲荣,张卫华(2003). 滚动轮波形磨损实验研究. 《摩擦学学报(中英文)》.DOI
  406. 徐进,朱旻昊,刘捍卫,陈建敏,周仲荣(2003). 湿度、温度及润滑油对粘结MoS2固体润滑涂层微动磨损寿命的影响. 《机械工程材料》.
  407. 黄洪钟,姚新胜,周仲荣(2003). 基于满意度原理的装载机工作装置的多目标优化设计. 《机械工程学报》.
  408. 徐进,朱旻昊,陈建敏,周慧娣,周仲荣(2003). 制备工艺对MoS2粘结固体润滑涂层微动磨损寿命的影响. 《摩擦学学报(中英文)》.
  409. 任平弟,陈光雄,周仲荣(2003). 不同水介质润滑下GCr15钢的微动磨损特性. 《摩擦学学报(中英文)》.
  410. 朱旻昊,周仲荣(2003). 7075铝合金复合微动行为的研究. 《摩擦学学报(中英文)》.
  411. 陈光雄,周仲荣(2003). 基于小波变换的摩擦噪声模态耦合机理研究. 《摩擦学学报(中英文)》.
  412. 郑靖,周仲荣,于海洋,张杰,黎红(2003). 口腔环境因素对树脂牙摩擦学特性的影响. 《摩擦学学报(中英文)》.
  413. 周仲荣,张文桂,朱昊,杨川,黄楠,张卫华(2003). 重点实验室参与本科教学实践的启示. 《高等工程教育研究》.
  414. 姚新胜,黄洪钟,周仲荣(2003). 广义满意度原理及其特性分析. 《西南交通大学学报》.
  415. 黄学文,董光能,周仲荣,王慧,谢友柏(2003). 三元Ti49.2Ni49.3Co1.5形状记忆合金的低频阻尼特性. 《西安交通大学学报》.
  416. 徐向阳,徐滨士,刘文今,刘世参,周仲荣(2003). 薄带钎料真空熔结制备CoCrW耐磨涂层. 《稀有金属材料与工程》.
  417. 周仲荣,朱旻昊(2003). 中法“4+4”合作计划的实施与探索. 《高等工程教育研究》.
  418. 赵华,金雪岩,朱民昊,周仲荣(2003). 微动接触应力的数值分析. 《工程科学与技术》.
  419. 黄学文,董光能,王慧,周仲荣,谢友柏(2003). TiNi形状记忆合金阻尼特性的研究. 《材料工程》.
  420. 徐向阳,徐滨士,刘文今,刘世参,钟敏霖,周仲荣(2003). 用镍基薄带钎料真空熔结Cr3C2-NiCr涂层的组织和性能. 《材料工程》.
  421. Zhongrong Zhou (2003). TRIBOLOGICAL SIZE EFFECT AND RELATED PROBLEMS.DOI
  422. Minhao Zhu, Zhongrong Zhou (2003). Dual-motion fretting wear behaviour of 7075 aluminium alloy. Wear.DOI
  423. Guizhen H. Xu, Minghao Zhu, Jiajun Liu, Zhongrong Zhou, Hong Yu Liang (2003). The effect of pre-treatment of substrate on fretting tribological behavior of MoS2 coatings. Wear.DOI
  424. Jing Zheng, Zhongrong Zhou, J Zhang, Haiyang Li, Haojia Yu (2003). On the friction and wear behaviour of human tooth enamel and dentin. Wear.DOI
  425. 石心余,周仲荣(2002). 一种新的表面形貌检测方法. 《润滑与密封》.
  426. 周仲荣(2002). 微动磨损. 《科学出版社》.
  427. 朱旻昊,周惠娣,陈建敏,周仲荣(2002). 二硫化钼粘结固体润滑涂层的径向和切向微动损伤的比较研究. 《摩擦学学报(中英文)》.
  428. 周仲荣(2002). 摩擦学尺寸效应及相关问题的思考. 《第七届全国摩擦学大会论文集(二)》.
  429. 朱旻昊,周仲荣(2002). GCr15轴承钢的复合微动磨损机制. 《第七届全国摩擦学大会论文集(二)》.
  430. 陈光雄,周仲荣,石心余(2002). 金属往复滑动摩擦噪声源的识别. 《摩擦学学报(中英文)》.
  431. 黄学文,董光能,王慧,周仲荣,谢友柏(2002). 超弹Ti-Ni合金的摩擦学特性研究. 《摩擦学学报(中英文)》.
  432. 徐进,朱旻昊,周仲荣,石心余,刘家浚(2002). 电刷镀铅—镍复合镀层微动磨损性能研究. 《中国表面工程》.
  433. 黎红,周仲荣,石心余,汤晓东,李洪庆(2002). 纯钛对天然牙的磨损特性研究. 《第九届全国生物材料学术会议(CBMS-9)论文集》.
  434. 何毓珏,陈光雄,刘启跃,朱旻昊,周仲荣(2002). 过渡区的摩擦特性研究. 《润滑与密封》.
  435. 吴爱民,刘捍卫,邹建新,周仲荣,董闯(2002). D2钢电子束表面改性抗微动磨损性能研究. 《核技术》.
  436. 徐向阳,徐滨士,刘文今,刘世参,周仲荣(2002). K417镍基高温合金微动磨损行为的研究. 《航空材料学报》.
  437. 姚新胜,黄洪钟,周仲荣,田志刚,李海滨(2002). 基于广义满意度原理的多目标优化理论研究. 《应用科学学报》.
  438. 张杰,黎红,周仲荣,陈光雄,宋之敏(2002). 人体天然牙不同深度层次的显微硬度与耐磨性的研究. 《生物医学工程学杂志》.
  439. Chen Guangxiong, Zhou Zhong-rong, Philippe Kapsa, L.D. “Lou” Vincent (2002). Effect of surface topography on formation of squeal under reciprocating sliding. Wear.DOI
  440. Guizhen H. Xu, Jiajun Liu, Zhongrong Zhou (2002). The Effect of the Third Body on the Fretting Wear Behavior of Coatings. Journal of Materials Engineering and Performance.DOI
  441. 黎红,张杰,周仲荣,石心余,李哲,杨德芸(2001). 新型牙科修复材料——钛与天然牙摩擦学特性匹配的研究. 《生物医学工程学杂志》.
  442. 黎红,周仲荣,张杰,陈光雄(2001). 天然牙及几种牙科修复材料的摩擦磨损性能比较研究. 《摩擦学学报(中英文)》.
  443. 陈光雄,周仲荣(2001). 金属往复滑动摩擦振动形成机理的实验研究和分析. 《摩擦学学报(中英文)》.
  444. 刘启跃,周仲荣,石心余(2001). 45#钢/GCr15钢摩擦副的滚动磨损特性研究. 《摩擦学学报(中英文)》.DOI
  445. 徐进,朱昊,周仲荣,刘家浚(2001). 稀土表面工程及其摩擦学应用的研究现状. 《中国表面工程》.
  446. 徐向阳,刘世参,张振学,徐滨士,周仲荣(2001). 等离子喷涂CoCrW涂层微动磨损特性的研究. 《材料工程》.
  447. 朱旻昊,周仲荣(2001). 关于复合式微动的研究. 《摩擦学学报(中英文)》.
  448. Guizhen H. Xu, Jiajun Liu, Zhou Zhong-rong, Wu Xiao-Li (2001). The fretting wear-resistant properties of steel with ion-sulphuration+shop-peening and shot-peening+ion-sulphuration duplex treatments. Tribology International.DOI
  449. Huijie Li, Zhongrong Zhou (2001). Wear behaviour of human teeth in dry and artificial saliva conditions. Wear.DOI
  450. Minhao Zhu, Zhongrong Zhou, Ph. Kapsa, Ludovic Vincent (2001). An experimental investigation on composite fretting mode. Tribology International.DOI
  451. Q.Y. Liu, Zhongrong Zhou (2001). Effect of tangential force on wear behaviour of steels in reciprocating rolling and rolling–sliding contact. Wear.DOI
  452. Guizhen H. Xu, Jiajun Liu, Zhongrong Zhou (2001). Prediction of the fretting fatigue resistance of various surface-modification layers on 1045 steel: the role of fretting maps. Tribology International.DOI
  453. Minhao Zhu, Zhongrong Zhou (2001). An investigation of molybdenum disulfide bonded solid lubricant coatings in fretting conditions. Surface and Coatings Technology.DOI
  454. Minhao Zhu, Zhongrong Zhou (2001). An experimental study on radial fretting behaviour. Tribology International.DOI
  455. 朱旻昊,周仲荣,石心余,刘启跃(2000). 新型径向微动装置. 《摩擦学学报(中英文)》.
  456. 朱旻昊,周仲荣(2000). TiN涂层的径向微动行为. 《摩擦学学报(中英文)》.
  457. 赵华,周仲荣(2000). 数值方法在微动疲劳研究中的应用进展. 《摩擦学学报(中英文)》.
  458. 陈光雄,周仲荣,谢友柏(2000). 摩擦噪声研究的现状和进展. 《摩擦学学报(中英文)》.
  459. 周仲荣(2000). 摩擦学设计:案例分析及论述. 《西南交通大学出版社》.
  460. 黎红,黄楠,周仲荣(2000). 生物摩擦学及表面工程的研究现状和进展. 《中国表面工程》.
  461. 徐向阳,周仲荣,张振学,刘世参,徐滨士(2000). 等离子喷涂CoCrW、Cr 3 C 2 /NiCr和WC/Co涂层的微动磨损行为. 《第一届国际机械工程学术会议》.
  462. 黎红,王永,周仲荣,孟晓黎,梁钦业,张雪洋,赵云凤(2000). 钛的氩弧焊试件的应力腐蚀的实验研究. 《生物医学工程学杂志》.
  463. 朱旻昊,周仲荣,陈光雄(1999). TiN涂层的冲击微动磨损. 《'99摩擦学表面工程学术会议论文集》.
  464. 徐桂珍,刘家浚,马晓华,周仲荣(1999). 45钢上几种表面涂层的微动损伤行为和机理研究. 《中国表面工程》.
  465. 朱旻昊,周仲荣,刘家浚(1999). 摩擦学白层的研究现状. 《摩擦学学报(中英文)》.
  466. 刘启跃,周仲荣(1999). 脂润滑对100C6钢微动磨损特性的影响. 《摩擦学学报(中英文)》.
  467. 朱昊,白彬,陈元儒,周仲荣(1999). 扩散处理对氮离子注入纯铁摩擦学性能的影响. 《摩擦学学报(中英文)》.
  468. 刘启跃,周仲荣,徐桂珍,刘家俊(1999). 微动滑移区域内不同润滑方式的研究. 《第五届全国青年摩擦学学术会议论文集》.
  469. 徐桂珍,周仲荣,刘家浚(1999). 基体材料特性对涂层抗微动磨损性能的影响. 《摩擦学学报(中英文)》.
  470. 刘启跃,周仲荣 (1999). Frequency Effectsin Fretting on 100C6 Steel. Railway Engineering Science.
  471. 黎红,赵云凤,肖茂春,梁春燕,李晓菁,张涛,周仲荣,潘英(1999). 激光焊接烤瓷合金的实验研究. 《中国口腔种植学杂志》.
  472. Sunqing Qiu, Zhongrong Zhou, Junxiu Dong, Guoxu Chen (1999). Preparation of Ni Nanoparticles and Evaluation of Their Tribological Performance as Potential Additives in Oils. Journal of Tribology.DOI
  473. Zhongrong Zhou, Ludovic Vincent (1999). Lubrication by thin polystyrene coating in fretting. Wear.DOI
  474. Zhongrong Zhou, Ludovic Vincent (1999). Lubrication in fretting—a review. Wear.DOI
  475. Guizhen H. Xu, Zhongrong Zhou, Jiajun Liu, Xiaohua Ma (1999). An investigation of fretting behavior of ion-plated TiN, magnetron-sputtered MoS2 and their composite coatings. Wear.DOI
  476. Guizhen H. Xu, Zhongrong Zhou, Jiajun Liu (1999). A comparative study on fretting wear-resistant properties of ion-plated TiN and magnetron-sputtered MoS2 coatings. Wear.DOI
  477. 刘启跃,王夏秋,周仲荣(1998). 钢轨表面波浪形磨损研究. 《摩擦学学报(中英文)》.
  478. 刘启跃,周仲荣(1998). 润滑脂对 100C6 碳钢微动磨损的影响. 《西南交通大学学报》.
  479. 周仲荣(1998). 微动图在抗微动失效中的应用. 《中国表面工程》.
  480. 徐桂珍,刘家浚,周仲荣(1998). 表面改性技术在微动摩擦学领域中的应用. 《摩擦学学报(中英文)》.
  481. Zhuang Daming, Liu Jiajun, Zhu Baoliang, Zhou Zhong-rong, L.D. “Lou” Vincent, Philippe Kapsa (1998). Effect of Stress State of Different Tin Films on Their Tribological Behavior. Journal of Tribology.DOI
  482. Zhongrong Zhou, Ph. Kapsa, Ludovic Vincent (1998). Grease Lubrication in Fretting. Journal of Tribology.DOI
  483. 周仲荣,罗唯力,刘家浚(1997). 微动摩擦学的发展现状与趋势. 《摩擦学学报(中英文)》.DOI
  484. P.Reybet Degat, Zhongrong Zhou, Ludovic Vincent (1997). Effect of chromic acid anodizing treatment on fretting behaviour during fretting tests on pre-stressed specimens. Thin Solid Films.DOI
  485. P.Reybet Degat, Zhongrong Zhou, Ludovic Vincent (1997). Fretting cracking behaviour on pre-stressed aluminium alloy specimens. Tribology International.DOI
  486. Zhongrong Zhou, Ludovic Vincent (1997). Cracking Induced by Fretting of Aluminium Alloys. Journal of Tribology.DOI

预印本

  1. Jiabao Yin, Yuanke Wu, Chun Lu, Wei Chen, Jiliang Mo, Zhongrong Zhou (2021). The Influence of Friction Blocks Connection Configuration on High-speed Railway Brake Systems Performance. Research Square.DOI
  2. Chun Lu, Jiliang Mo, Ruixue Sun, Yuanke Wu, Zhiyong Fan, Zhongrong Zhou (2020). Investigation into multiaxial fatigue character of thermomechanical damage on high-speed railway brake disc.DOI

书籍章节

  1. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Yan (2013). Clinical Evaluation and Laboratory Wear-Testing Methods. Springer eBooks.DOI
  2. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Yan (2013). Effect of the Oral Environment on the Tribological Behavior of Human Teeth. Springer eBooks.DOI
  3. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Jing Yan (2013). Friction and Wear Behavior of Human Teeth. Springer eBooks.DOI
  4. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Jing Yan (2013). Introduction to Teeth. Springer eBooks.DOI
  5. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Yan (2013). Tribological Behavior of Dental Restorative Materials. Springer eBooks.DOI
  6. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Jing Yan (2013). Inspiration from the Wear of Human Teeth. Springer eBooks.DOI
  7. Zhongrong Zhou, Haiyang Yu, Jing Zheng, Linmao Qian, Yu Jing Yan (2013). Microtribology of Human Teeth. Springer eBooks.DOI
  8. Jiliang Mo, Z. J. Liao, Minhao Zhu, Zhongrong Zhou (2009). An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel. Springer eBooks.DOI
  9. Zhenbing Cai, J. Yu, Zhongrong Zhou, Minhao Zhu, S.X. Qu (2009). Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies. Springer eBooks.DOI
  10. Jiaxin Yu, Bingjun Yu, Linmao Qian, Zhongrong Zhou (2009). Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum. Springer eBooks.DOI
  11. Bingjun Yu, Jiaxin Yu, Zhongrong Zhou, Linmao Qian, Jun Ming Luo (2009). Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum. Springer eBooks.DOI
  12. Xiaomin Liu, Aiqin Liu, Shuxin Qu, Xiaohong Li, Linmao Qian, Zhongrong Zhou (2009). Study on the Release of Estradiol from UHMWPE Loading Estradiol Wear Debris in vitro. Springer eBooks.DOI
  13. Shuxin Qu, Aiqin Liu, Xiaomin Liu, Shengfu Li, Jie Weng, Zhongrong Zhou (2009). Study on UHMWPE Carrying Estradiol to Treat the Particle-Induced Osteolysis. Springer eBooks.DOI

数据集

  1. Yang Ziteng, Wang Yibo, Zhang Mengqi, Mei Yuanyuan, Mo Jiliang, Zhou Zhongrong (2026). Abrasive Wear Process of TBM Disc Cutter and Its Effects on Cutting Performance. ScienceDB.DOI
  2. Cao Qian, travel around, Shi Rui, Zhao Zhonghang, Lei Lei, Zheng Jing, Zhou Zhongrong (2026). Progress on the Regulation of Tribological Properties of Ceramics. ScienceDB.DOI
  3. Cheng Jiahao, Song Xinxin, Zhang Shujun, 徐孟南 Xu Mengnan, Wang Wenjian, Guo Jun, Zhou Zhongrong (2026). Influence Law of Surface Texture on Wheel-Rail Adhesion Characteristics under the Dry Condition. ScienceDB.DOI

此主页由公开资料整理,尚未经学者本人认领。