张清东

期刊论文

1. Jintao Shi, J. Zuo, Qingdong Zhang, Jie Guo, Lei Feng, Jingguo Song, Lu Fang, Dong-Jia Yao, Chaofeng Ma, Fa-Xiang Li (2026). Comprehensive Study on Hot Deformation Behavior and Mechanical Properties of Al-0.8Mg-1.2Si-0.5Cu-0.5Fe-0.3Mn-3.0Zn With Fast Age Hardening Response. Materials Today Communications.DOI
2. Zhiying Gao, Hechuan Song, Boyang Zhang, Qingdong Zhang, Qingdong Zhang (2026). Thermal-magnetic stress relief induced evolution of residual stress and mechanical properties in selectively laser melted AlSi10Mg alloy. Materials Science and Engineering A.DOI
3. Shuo Cai, Pengliang Ji, Zhiying Gao, Song Zeng, Qingdong Zhang, Boyang Zhang (2026). Research on evolution behavior and mechanism of flatness defects during laminar cooling of hot-rolled high-strength steel plates. The International Journal of Advanced Manufacturing Technology.DOI
4. 宋和川，周晓敏，张清东，熊青霞，张勃洋（2025）. 磁处理对铁磁材料残余应力调控规律及机理研究. 《机械工程学报》.
5. Qingdong Zhang, Jin-Rong Zuo, Chen Yang, Zheng Ma, Xue-Dao Shu, Kai Chen, Xiaofeng Wang, Ying Wang, Xian Yao, Bizhou Mei (2025). Multi-objective optimization of hot extrusion process parameters for complex cross-section aluminum profiles with high aging response alloys. The International Journal of Advanced Manufacturing Technology.DOI
6. Chi Lin, Xuehua Zhou, Hechuan Song, Qingdong Zhang, Boyang Zhang (2025). A hybrid KSFA-ICA-MVNCA framework for shape quality monitoring and anomaly tracing in cold rolling of high-strength steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
7. Yanli Xin, Zhiying Gao, Xiaoyong Wang, Qingdong Zhang, Xiaomin Zhou (2025). Dynamic Modeling and Response Characteristics Analysis in High-Temperature Melting and Rolling Process of Laminated Steel. Journal of Engineering and Technological Sciences.DOI
8. Shuo Cai, Qingdong Zhang, Boyang Zhang, Bin Wang, Pengliang Ji, Bo Chen (2025). Research progress on edge cracking behavior and mechanisms of steel strip during rolling process: A review. Journal of Manufacturing Processes.DOI
9. Hao Li, Qingdong Zhang, Bin Wang (2025). The preparation and bonding property of PET-steel composite sheet with the interlayer of PU film. Journal of Physics Conference Series.DOI
10. Zhiying Gao, Hechuan Song, Qingdong Zhang, Boyang Zhang (2025). Research on non-destructive detection method of steel plate internal stress based on magnetoelastic effect. Nondestructive Testing And Evaluation.DOI
11. Xiaomin Zhou, Qingxia Xiong, Bin Wang, Hechuan Song, Qingdong Zhang (2025). Lasso constraint regularized multi-objective variable hierarchical decoupling optimization flatness control strategies. The International Journal of Advanced Manufacturing Technology.DOI
12. Zhiying Gao, Hechuan Song, Qingdong Zhang, Boyang Zhang (2025). Synergistic control mechanism of thermal vibration stress relief on residual stress and mechanical properties of additively manufactured AlSi10Mg. Additive manufacturing.DOI
13. Bin Wang, G.Q. Shang, Boyang Zhang, Qingdong Zhang, Xiaomin Zhou, Shuo Cai (2025). An intelligent cross-process prediction model integrating the mechanistic model and LSTM. Journal of Physics Conference Series.DOI
14. Bin Wang, Pengliang Ji, Shuo Cai, Qingdong Zhang, Boyang Zhang (2025). Research on width-balanced variable crown roll contour design and flatness control strategy. Ironmaking & Steelmaking Processes Products and Applications.DOI
15. 黄钢，张清东，张勃洋，姬保平，于铭洋（2024）. 钢板残余应力检测方法的实验比较. 《振动、测试与诊断》.
16. Qingdong Zhang, Jin-Rong Zuo, Yingxiang Xia, J. Tomczak, Z. Pater, Zheng Ma, Chen Yang, Xue-Dao Shu, Bizhou Mei, Guo-Biao Wang (2024). Investigation of hot deformation behavior and Three-Roll Skew Rolling Process for Hollow Stepped Shaft of Al-Zn-Mg-Cu Alloy. Journal of Materials Research and Technology.DOI
17. Qingdong Zhang, Jin-Rong Zuo, Chen Yang, Yingxiang Xia, Xuedao Shu, Bizhou Mei, Ying Wang, Long Cui (2024). Investigation of deformation behavior and strain-induced precipitations in Al–Zn–Mg–Cu alloys across a wide temperature range. Scientific Reports.DOI
18. Xiaomin Zhou, Qingxia Xiong, Boyu Jia, Hechuan Song, Qingdong Zhang, Boyang Zhang (2024). Data-driven flatness presetting control ensemble method for skin pass rolling mill. The International Journal of Advanced Manufacturing Technology.DOI
19. Hao Li, Mingyang Yu, Qingdong Zhang, Bin Wang (2024). A method for reducing the length difference of Vickers indentation diagonal. Metrology and Measurement Systems.DOI
20. Xiaoyong Wang, Zhiying Gao, Yan-li Xin, Qingdong Zhang (2024). Dynamic modeling and analysis on rigid-flexible coupling between vertical chatter and transverse bending vibration in process of cold rolling. Journal of Iron and Steel Research International.DOI
21. Zhijun Chen, Lingyun Qian, Jinguang Du, Ruikang Cui, Qingdong Zhang (2024). A novel method to predict residual stress by coupling the phase transition effect for LA103Z Mg-Li alloy milling. Journal of Manufacturing Processes.DOI
22. Hechuan Song, Xiaoke Hu, Junqiang Wang, Xiaomin Zhou, Qingdong Zhang, Boyang Zhang (2024). Evolution and formation mechanism of residual stress in Al-Cu alloy rings during ring rolling and quenching. Engineering Failure Analysis.DOI
23. Xiaoke Hu, Hechuan Song, Kai Yang, Xiaomin Zhou, Qingdong Zhang, Boyang Zhang (2024). Research on the Flatness Control Performance and Parameter Influence Law of Four-High Skin Pass Rolling Mill. Journal of Materials Engineering and Performance.DOI
24. Xiaoke Hu, Hechuan Song, Kai Yang, Xiaomin Zhou, Qingdong Zhang, Boyang Zhang (2024). Bonding Behavior and Mechanism of Composite Interface Between Carbon Steel/Stainless Steel Laminates at Different Temperatures and Strain Rates. steel research international.DOI
25. Baoping Ji, Jianshu Cao, Qingdong Zhang (2024). Evaluation of the Bond Quality of Metal-Clad Plates Using Laser Ultrasonic Local Resonance. Coatings.DOI
26. Zhijun Chen, Lingyun Qian, Xiaoyuan Ji, Qingdong Zhang, Tengbowen Wei, Jingju Chen, Sufeng Hao (2024). Machining-induced residual stress and deformation during Mg–Li alloy thin-walled rib-web parts milling. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
27. Hechuan Song, Chenlong Song, Xiaoke Hu, Kai Yang, Zhiying Gao, Qingdong Zhang (2024). Dynamic response law and residual stress evolution mechanism of high-strength steel flexible body controlled by vibration stress relief. Materials Today Communications.DOI
28. Hechuan Song, Zhiying Gao, Xiaomin Zhou, Qingdong Zhang, Boyang Zhang (2024). Research on the evolution law and control mechanism of residual stress under vibration stress relief. Materials Today Communications.DOI
29. 李东山，孔宁，张清东，曹学乾，鲁志斌，万晓娜，林博（2023）. 二维纳米石墨烯作为传动油添加剂的齿轮承载性能研究. 《表面技术》.
30. Yingxiang Xia, Xuedao Shu, Qingdong Zhang, Z. Pater, Zi-Xuan Li, Haijie Xu, Zheng Ma, Cheng Xu (2023). Modified Arrhenius constitutive model and simulation verification of 2A12-T4 aluminum alloy during hot compression. Journal of Materials Research and Technology.DOI
31. Yan-li Xin, Zhiying Gao, Bo Han Tian, Qingdong Zhang (2023). Influence of friction-lubrication characteristics varying with rolling speed on instability of chatter and slip in cold tandem rolling process. Journal of Iron and Steel Research International.DOI
32. Hechuan Song, Hanjun Gao, Qingdong Zhang, Xiaomin Zhou, Boyang Zhang (2023). Long-term stress relaxation behaviors and mechanisms of 2219 Al–Cu alloy under various temperatures and initial stresses. Journal of Material Science and Technology.DOI
33. Baoping Ji, Haonan Zhang, Jianshu Cao, Qingdong Zhang (2023). Evaluation of the Thickness of Each Layer of Cu/Al Laminate Using Laser Ultrasonic. Coatings.DOI
34. Jiaqi Li, Boyang Zhang, Qingdong Zhang, Rui Li (2023). The influence of surface topography on mixed plasto-elastohydrodynamic lubrication in point contacts. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
35. Hao Li, Qingdong Zhang, Mingyang Yu (2023). Interface Structure Change and Carbon Diffusion of Stainless Steel-Carbon Steel-Laminated Composite under High-Temperature Condition. Journal of Materials Engineering and Performance.DOI
36. Zhijun Chen, Lingyun Qian, Baoping Ji, Yan Liang, Huiqiang Zhen, Qingdong Zhang (2023). Investigation into thermodynamic behavior of LA103Z Mg Li alloy during turning based on modified Johnson–Cook model. Journal of Manufacturing Processes.DOI
37. 周晓敏，李雄，李丽琦，巩宪锋，张清东，张勃洋（2022）. 基于自适应矩估计算法的冷连轧机板形反馈优化控制策略. 《冶金自动化》.
38. 于孟，王春海，张晓峰，文杰，王永强，张清东（2022）. 不锈钢/碳钢复合板平整轧制过程板形翘曲行为. 《钢铁》.
39. 姬保平，曹建树，黄钢，于铭洋，陈志君，张清东（2022）. 钢板内应力激光超声导波检测方法研究. 《中国激光》.
40. Gang Huang, Qingdong Zhang (2022). Effect of Combined Magnetic-Vibration Treatment on Residual Stress and Macroscopic Properties of Silicon Steel. Journal of Materials Engineering and Performance.DOI
41. Mingyang Yu, Bin Wang, Bo Li, Boyang Zhang, Qingdong Zhang (2022). Multi-channel non-destructive testing of steel strip stress based on magneto-elastic effect. Nondestructive Testing And Evaluation.DOI
42. Shushan Hu, Qingdong Zhang, Ronge Liu (2022). The Effect of Water Penetration Velocity on Temperature Field of Strip Steel. International Conference on Computer Modeling and Simulation (ICCMS).DOI
43. Shu-Shan Hu, Qingdong Zhang, Qiang Cao, Ronge Liu (2022). The Effect of Stress on Ferrite Transformation During the Continuous Annealing of DP780 High-Strength Steel. Science of Advanced Materials.DOI
44. Qingdong Zhang, Mingyang Yu, Boyang Zhang, Hao Li (2022). Effect of surface roughness of electroplating chromium coated steel on bonding strength of polymer coated steel. Polymers and Polymer Composites.DOI
45. Qingdong Zhang, Mingyang Yu, Boyang Zhang, Hao Li (2022). Growth behavior of interface microstructure between stainless steel and carbon steel during bonding process. Materials Today Communications.DOI
46. Luo Zhang, Yetao Li, Qingdong Zhang, Sheng Zhang (2022). Microstructure evolution, phase transformation and mechanical properties of IN738 superalloy fabricated by selective laser melting under different heat treatments. Materials Science and Engineering A.DOI
47. 张勃洋，张煜东，李嘉琪，李瑞，张清东（2021）. 非光滑带钢在粗糙轧辊平整轧制过程中表面微观形貌的转印行为与演变规律. 《工程科学学报》.
48. 王春海，张清东，李豪，张立元，张勃洋（2021）. 金属层合板板形翘曲变形行为. 《工程科学学报》.DOI
49. Dongshan Li, Ning Kong, Ruishan Li, Boyang Zhang, Yongshun Zhang, Zhiguo Wu, Qingdong Zhang (2021). The tribological performance of W-DLC in solid–liquid lubrication system addivated with Cu nanoparticles. Surface Topography Metrology and Properties.DOI
50. Luo Zhang, Yetao Li, Sheng Zhang, Qingdong Zhang (2021). Selective laser melting of IN738 superalloy with a low Mn+Si content: Effect of energy input on characteristics of molten pool, metallurgical defects, microstructures and mechanical properties. Materials Science and Engineering A.DOI
51. Gang Huang, Qingdong Zhang, Boyang Zhang, Shuo Li (2021). Microscopic mechanism of the combined magnetic-vibration treatment for residual stress reduction. Results in Physics.DOI
52. Baoping Ji, Jianshu Cao, Mingyang Yu, Zhijun Chen, Qingdong Zhang (2021). Application of laser ultrasonic for detecting delamination in Cu/Al composites. Optik.DOI
53. Shu-Shan Hu, Qingdong Zhang, Ronge Liu (2021). High-Temperature Behavior and Constitutive Modeling of MS1180 High-Strength Steel. Science of Advanced Materials.DOI
54. Jiyang Liu, Qingdong Zhang, Boyang Zhang, Mingyang Yu (2021). The Influence of the Roll-Laminating Process on the Bonding Quality of Polymer-Coated Steel Interface. Coatings.DOI
55. Baoping Ji, Qingdong Zhang, Jianshu Cao, Boyang Zhang, Liyuan Zhang (2021). Delamination Detection in Bimetallic Composite Using Laser Ultrasonic Bulk Waves. Applied Sciences.DOI
56. Gang Huang, Qingdong Zhang, Shuo Li (2021). Research on Magnetic-Vibration Combination Treatment Based on Multifield Coupled Finite Element Analysis. Smart and Sustainable Manufacturing Systems.DOI
57. Gang Huang, Qingdong Zhang, Shuo Li (2021). Study on a stress-magnetic relationship of DO3 based on first principles. Materials Today Communications.DOI
58. 黄钢，张清东，王春海，张勃洋，孔宁（2020）. 钢板残余应力盲孔测量法试验及应用. 《焊接学报》.
59. 刘阳，郜志英，周晓敏，张清东（2020）. 工业数据驱动下薄板冷轧颤振的LSTM智能预报. 《机械工程学报》.
60. Baoping Ji, Qingdong Zhang, Liyuan Zhang, Jianshu Cao, Boyang Zhang (2020). Non-contact Detection of Delamination in Cu/Al Laminated Plate with Laser Ultrasonic. IOP Conference Series Materials Science and Engineering.DOI
61. Dazhi Zhang, Mingsheng Guan, Qingdong Zhang, Aiguo Wang, Zhou Xinliang (2020). Simulation study on steel pipe deformation behavior in retained mandrel pipe mill. Journal of Physics Conference Series.DOI
62. Ning Kong, Chuan Zhen Zhao, Jianguo Cao, Qingdong Zhang (2020). A Study on Potential Strip Shape Control of High‐Strength Steel during Hot Pinch Rolling Process. steel research international.DOI
63. Qingdong Zhang, Gang Huang, Shuo Li (2020). Mechanical Properties of DO3 Based on First Principles. Crystals.DOI
64. Zhiying Gao, Yang Liu, Qingdong Zhang, Maolin Liao, Bo Han Tian (2020). Chatter model with structure-process-control coupled and stability analyses in the cold rolling system. Mechanical Systems and Signal Processing.DOI
65. Jiyang Liu, Qingdong Zhang, Boyang Zhang, Mingyang Yu (2020). The Bonding Mechanism of the Micro-Interface of Polymer Coated Steel. Polymers.DOI
66. Dongshan Li, Ning Kong, Boyang Zhang, Bo Zhang, Ruishan Li, Qingdong Zhang (2020). Comparative study on the effects of oil viscosity on typical coatings for automotive engine components under simulated lubrication conditions. Diamond and Related Materials.DOI
67. Baoping Ji, Qingdong Zhang, Jianshu Cao, Hao Li, Boyang Zhang (2020). Non-contact detection of delamination in stainless steel/carbon steel composites with laser ultrasonic. Optik.DOI
68. Gang Huang, Qingdong Zhang, Shuo Li (2020). Tension and compression effect on mechanical properties of Fe and B2. Materials Research Express.DOI
69. Hao Li, Liyuan Zhang, Boyang Zhang, Qingdong Zhang (2020). Effect of substrate on metallographic corrosion of cladding in stainless/carbon steel bimetal plate. Results in Physics.DOI
70. Hao Li, Liyuan Zhang, Boyang Zhang, Qingdong Zhang (2020). Effect of Heat Treatment on the Microstructure and Corrosion Resistance of Stainless/Carbon Steel Bimetal Plate. Advances in Materials Science and Engineering.DOI
71. Jiyang Liu, Qingdong Zhang, Libo Geng, Boyang Zhang, Liyuan Zhang (2020). Study on evolution law of lateral thickness difference of polymer-coated steel in laminating process. Materials Today Proceedings.DOI
72. 王森，张勃洋，张立元，张清东（2019）. 三维稳态板轧制过程快速无网格伽辽金法模拟. 《塑性工程学报》.
73. 张清东，林潇，刘吉阳，胡树山（2019）. Q&P钢热处理过程有限元法数值模拟模型研究. 《金属学报》.
74. 张清东，李硕，张勃洋，谢璐，李瑞（2019）. 金属轧制复合过程微观变形行为的分子动力学建模及研究. 《金属学报》.
75. 凌启辉，张维，赵前程，闫晓强，张清东（2019）. 轧机垂直系统动力学参数辨识. 《钢铁》.DOI
76. Hao Li, Liyuan Zhang, Boyang Zhang, Qingdong Zhang (2019). Interfacial fracture morphologies of stainless steel clad plates after uniaxial tension. IOP Conference Series Earth and Environmental Science.DOI
77. Hao Li, Liyuan Zhang, Boyang Zhang, Qingdong Zhang (2019). Interfacial fracture behavior of a stainless/carbon steel bimetal plate in a uniaxial tension test. Results in Physics.DOI
78. Qingdong Zhang, Shuo Li, Rui Li, Boyang Zhang (2019). Multiscale Comparison Study of Void Closure Law and Mechanism in the Bimetal Roll-Bonding Process. Metals.DOI
79. Hao Li, Liyuan Zhang, Boyang Zhang, Qingdong Zhang (2019). Microstructure Characterization and Mechanical Properties of Stainless Steel Clad Plate. Materials.DOI
80. 李硕，李根，张勃洋，张清东（2018）. 冷轧工作辊表面微观形貌磨损行为研究. 《华中科技大学学报(自然科学版)》.
81. 陈斌，游慧超，宋鸣，刘国勇，朱冬梅，张清东（2018）. 热连轧工况对工作辊温度场的影响. 《机械制造与自动化》.
82. Qingdong Zhang, Xiaomin Zhou, Boyang Zhang, Xiao Chuan Lin (2018). Elongation control of the ultra-thin tinplate during two-stand temper rolling unsteady process. Ironmaking & Steelmaking Processes Products and Applications.DOI
83. Qingdong Zhang, Shuo Li, Jiyang Liu, Yanan Wang, Boyang Zhang, Liyuan Zhang (2018). Study of a Bimetallic Interfacial Bonding Process Based on Ultrasonic Quantitative Evaluation. Metals.DOI
84. Bin Chen, Ming Ming Mao, Ming Yang Song, Guoyong Liu, Ning Kong, Qingdong Zhang, Guomin Han (2018). Optimization on the cooling nozzles arrangement of hot rolling work roll. Joint International Information Technology, Mechanical and Electronic Engineering Conference (JIMEC).DOI
85. 戴竞舸，朱涛，陈光，樊志强，何小丽，张清东，刘巨双（2017）. 冷连轧机薄料轧制出现的泡泡浪板形缺陷问题研究. 《第十一届中国钢铁年会论文集——S03.轧制与热处理》.
86. 史亚鸣，李志敏，曹占元，张立元，张清东（2017）. 钛带冷轧过程塑性变形与板形调控功效的仿真研究. 《金属世界》.
87. 史亚鸣，李志敏，曹占元，张立元，张清东（2017）. 钛带在带钢连续退火炉内张应力横向分布仿真. 《中国冶金》.
88. 王康健，王欣，郜志英，张清东（2017）. 冷轧薄板高速轧制时的振动问题及抑振措施. 《第十一届中国钢铁年会论文集——S17.冶金设备与工程技术》.
89. 孙磊，张清东，张立元（2017）. 带钢平整张力神经网络预设定模型研究. 《轧钢》.
90. 林潇，张清东（2017）. HC1150/1400MS马氏体钢的高温本构模型. 《金属热处理》.
91. 凌启辉，赵前程，王宪，闫晓强，张清东（2017）. 热连轧机机液耦合系统振动特性. 《钢铁》.
92. 张清东，林潇，曹强，卢兴福，张勃洋，胡树山（2017）. 冷轧高强钢板淬火过程板形瓢曲缺陷演变规律研究. 《金属学报》.
93. 徐泷，刘吉阳，李硕，张清东（2017）. 热静压复合工艺条件对不锈钢/碳钢界面复合率的影响. 《第十一届中国钢铁年会论文集——S03.轧制与热处理》.
94. Qingdong Zhang, Xiao Chuan Lin, Qiang Cao, Chaoyang Sun, Liyuan Zhang, Boyang Zhang (2017). Flatness evolution of cold-rolled high-strength steel strips during quenching process. Advances in Mechanical Engineering.DOI
95. Qingdong Zhang (2017). Experimental Study on Residual Stress Reduction for the High-strength Steel Based on Vibration Stress Relief. Journal of Mechanical Engineering.DOI
96. 张清东，张勃洋，李瑞，马磊（2016）. 镀锡钢板表面光泽度轧制转印控制. 《机械工程学报》.
97. 张清东，张勃洋，马磊，李瑞，张雍（2016）. 高强度带钢表面粗糙度轧制转印规律及预测模型. 《工程科学学报》.
98. Chaoyang Sun, Yu Xiang, Geng Liu, Xun Zuo, Mengqi Wang, Qingdong Zhang (2016). Extrusion limit diagram of IN 690 super-alloy tube based on hot processing map. The International Journal of Advanced Manufacturing Technology.DOI
99. Qingdong Zhang, Boyang Zhang, Xingfu Lu (2016). Two dimensional element free Galerkin coupled flow function method and its application. Engineering Computations.DOI
100. Qingdong Zhang (2016). Control of Surface Glossiness during Temper Rolling Aimed at Improving Visual Aesthetics of Tinplate. Journal of Mechanical Engineering.DOI
101. Qingdong Zhang (2016). Simulation of the Rolling Wear of Work Roll Surface Asperities during Strip Cold Rolling by Discrete Element Method. Journal of Mechanical Engineering.DOI
102. Qingdong Zhang, Yuanxiao Su, Liyuan Zhang, Jia Bi, Jiang Bo Luo (2016). Magnetoelastic Effect-Based Transmissive Stress Detection for Steel Strips: Theory and Experiment. Sensors.DOI
103. 李根，叶学卫，张清东，马磊（2015）. 带钢冷轧机工作辊表面微观形貌耐磨性研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
104. 林潇，张清东（2015）. 马氏体薄带钢张力水淬残余应力的数值模拟. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
105. 冯哲，张清东，张立元（2015）. 基于内聚力模型的金属复合板再轧制减薄有限元模拟. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
106. 冯哲，张清东，张勃洋（2015）. 不锈钢/铜/钛复合板复合界面元素扩散行为研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
107. 张晓华，徐刚，王英杰，张清东（2015）. 非稳态连续退火过程带钢张应力分布仿真分析. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
108. 张亚文，刘亚军，张清东（2015）. 极薄带钢非稳态轧制过程板形仿真研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
109. 李宇，李秀军，张清东（2015）. 极薄板带钢S型翘曲变形行为研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”;第十届中国钢铁年会暨第六届宝钢学术年会》.
110. 苏愿晓，张清东，曾杰伟（2015）. 高强度钢板残余应力消减方法研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
111. 张雍，张清东，李瑞，张勃洋（2015）. 带钢冷轧机工作辊表面轧制磨损形貌的模拟仿真. 《中国表面工程》.
112. 李博，张清东，张晓峰（2015）. 带钢平整轧制过程中板形缺陷的遗传和演变规律. 《工程科学学报》.
113. 焦宗寒，卢兴福，冯哲，孙大乐，王学敏，张清东（2015）. 多辊矫直机板形调控性能仿真研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
114. 曾杰伟，张清东，苏兰海，徐立坪，马翔华，缪存孝（2015）. 基于磁弹效应的钢板内应力传感器无损检测系统. 《仪表技术与传感器》.
115. 刘宝军，朱简如，曹强，张清东（2015）. 基于中间辊辊形优化的冷连轧机同板差控制技术. 《宝钢技术》.
116. 张清东，周岁，银家琛（2015）. 薄带材浪形缺陷生成与拉伸矫直过程数值仿真. 《工程科学学报》.
117. 曾杰伟，张清东，缪存孝，苏兰海，毕佳（2015）. 透射式磁弹性带钢应力无损检测. 《工程科学学报》.
118. Rui Li, Qingdong Zhang, Xiaofeng Zhang, Meng Yu, Bo Wang (2015). Control method for steel strip roughness in Two-stand temper mill rolling. Chinese Journal of Mechanical Engineering.DOI
119. Qingdong Zhang (2015). Element Free Galerkin Method Coupled Flow Function for Plane Strain Strip Rolling Process. Journal of Mechanical Engineering.DOI
120. 张清东，尹忠俊，秦勤，吴迪平，李洪波，张晓峰，曹建国，闫晓强，刘国勇，杨海波，阳建宏，黎敏（2014）. 冶金机械及自动化分学科发展——冶金机械. 《2012—2013冶金工程技术学科发展报告》.
121. 张清东，李博，张晓峰（2014）. 带钢平整轧制板形控制行为及效应的研究. 《机械工程学报》.
122. 李博，张清东，张晓峰（2014）. 非对称轧制力能参数与带钢张应力分布规律. 《哈尔滨工业大学学报》.
123. 李博，张清东，张晓峰（2014）. 带钢平整轧制残余应力场的二维数值模拟. 《轧钢》.
124. 张晓峰，卢兴福，张清东（2014）. 薄宽带钢任意位置局部浪形屈曲变形行为分析. 《第23届全国结构工程学术会议论文集（第Ⅰ册）》.
125. 张清东，卢兴福，张晓峰（2014）. 正交各向异性带钢瓢曲变形行为样条有限元研究. 《工程力学》.
126. 凌启辉，闫晓强，张清东，张义方（2014）. 双动力源作用下热连轧机工作辊非线性水平振动特性研究. 《振动与冲击》.
127. 毛艺伦，张清东，张晓峰，孙朝阳（2014）. 金属管材曲线型凹模挤压力的基础流函数法求解. 《工程力学》.
128. 刘宝军，曹强，张清东（2014）. UCMW冷连轧机板形控制系统优化. 《宝钢技术》.
129. 张清东，卢兴福，戴杰涛，秦剑（2014）. 冷轧带钢板形翘曲变形过程及规律的解析. 《工程科学学报》.
130. 张清东，卢兴福，张晓峰（2014）. 表观平直带钢裁切加工后翘曲变形行为研究. 《工程力学》.
131. 凌启辉，闫晓强，张清东，张义方（2014）. 双动力源驱动下的热连轧机振动特征. 《振动、测试与诊断》.
132. 张清东，卢兴福，张晓峰（2014）. 具有初始翘曲缺陷冷轧薄带钢板形瓢曲变形行为研究. 《工程力学》.
133. 曾杰伟，苏兰海，徐立坪，张晓峰，张清东（2014）. 逆磁致伸缩效应钢板内应力检测技术研究. 《机械工程学报》.
134. 张勃洋，张清东，毛艺伦，张晓峰（2014）. Inconel690合金圆管挤压变形行为无网格法研究. 《机械工程学报》.
135. 李瑞，曹建行，张清东，张晓峰（2013）. 镀锡板表面视觉质量与分形维数的关系研究. 《第九届中国钢铁年会论文集》.
136. 李博，张清东，张晓峰（2013）. 带钢平整轧制过程中残余应力场的二维有限元分析. 《第九届中国钢铁年会论文集》.
137. 张清东，代畅，文杰，张晓峰，秦剑（2013）. 二十辊森吉米尔轧机板形调控性能仿真研究. 《轧钢》.
138. 曹强，张清东（2013）. 先进高强度钢温变形特性分析及其本构关系的建立. 《第九届中国钢铁年会论文集》.
139. 李博，张清东，张晓峰（2013）. 平整轧制过程工艺参数对带钢残余应力场的影响. 《塑性工程学报》.
140. 卢兴福，张清东，张晓峰（2013）. 薄宽带钢翘曲变形行为解析研究. 《第九届中国钢铁年会论文集》.
141. Chaoyang Sun, Geng Liu, Qingdong Zhang, Rui Li, Liliang Wang (2013). Determination of hot deformation behavior and processing maps of IN 028 alloy using isothermal hot compression test. Materials Science and Engineering A.DOI
142. Chaoyang SUN, Junyuan Luan, Geng Liu, Rui Li, Qingdong Zhang (2013). PREDICTED CONSTITUTIVE MODELING OF HOT DEFORMATION FOR AZ31 MAGNESIUM ALLOY. Acta Metallurgica Sinica.DOI
143. Qingdong Zhang, Qiang Cao (2013). Planar anisotropy of commercially pure titanium sheets. Rare Metals.DOI
144. Qingdong Zhang (2013). Theory and Technology of Transverse Thickness Deviation Control for DI Tinplate during Tandem Cold Rolling. Journal of Mechanical Engineering.DOI
145. 吴彬，张清东，张晓峰（2012）. 冷连轧机辊型配置对高强钢板形控制的影响. 《轧钢》.
146. 孙朝阳，栾京东，刘赓，李瑞，张清东（2012）. AZ31镁合金热变形流动应力预测模型. 《金属学报》.
147. 吴彬，张清东，张晓峰（2012）. 粗糙表面镀锡基板连退平整轧制过程表面控制. 《中国冶金》.
148. Jian Ping Qin, Qingdong Zhang, Kefu Huang (2012). Nonlinear Spline Finite Element Method for Ribbing of Cold-Rolled Coils. Journal of Iron and Steel Research International.DOI
149. 张晓峰，张清东（2011）. 薄带钢冷连轧非稳态轧制过程厚度与张力控制研究. 《第八届（2011）中国钢铁年会》.
150. 孙朝阳，刘金榕，李瑞，张清东（2011）. Incoloy 800H高温变形流动应力预测模型. 《金属学报》.
151. 吴彬，张清东，张晓峰（2011）. 高强钢冷连轧机辊形配置对板形控制性能的影响. 《第八届（2011）中国钢铁年会》.
152. Jian Ping Qin, Qingdong Zhang, Kefu Huang (2011). Oblique and Herringbone Buckling Analysis of Steel Strip by Spline FEM. Journal of Iron and Steel Research International.DOI
153. Xiaofeng Zhang, Qingdong Zhang (2011). Robust control of strip tension for tandem cold rolling mill.
154. Chaoyang Sun, Changyou Liu, Rui Li, Qingdong Zhang (2011). CONSTITUTIVE MODELING FOR ELEVATED TEMPERATURE FLOW BEHAVIOR OF INCOLOY 800H SUPERALLOY. Acta Metallurgica Sinica.DOI
155. Chaoyang Sun, Jinrong Liu, Rui Li, Qingdong Zhang, Jianxin Dong (2011). Constitutive relationship of IN690 superalloy by using uniaxial compression tests. Rare Metals.DOI
156. Qingdong Zhang (2011). Analysis and Experiment on Central Buckling and Post Buckling of Thin Cold-rolled Sheet.
157. Qingdong Zhang (2011). Optimization of deformation zone parameter for IN690 superalloy during tube hot extrusion. Duanya jishu.
158. Rui Li, Hao Cheng, Chaoyang Sun, Qingdong Zhang (2011). An experimental Study on lubrication behavior of glass during deformation process of alloy Incoloy 800H. International Conference on Mechanic Automation and Control Engineering.DOI
159. 于孟，张清东，周俊，黄钢，徐展（2010）. 硬质薄规格镀锡板平整轧制变形行为与辊形技术. 《工程科学学报》.
160. 于孟，张清东，何汝迎，李实，叶乃威（2010）. 冷轧SUS301和SUS304不锈钢表面硬度控制工艺优化研究. 《钢铁》.
161. 张清东，白剑，文杰，徐乐江，吴彬，饶志雄（2010）. 宝钢2030冷连轧机组机型研究与改善. 《钢铁》.
162. 戴杰涛，张清东，黄河（2010）. 薄带钢轧制过程中工作辊辊端压靠研究. 《钢铁》.
163. 孙朝阳，张栋，张清东，李实，蔡永跃（2010）. 不锈钢带拉矫过程变形行为的数值模拟研究. 《钢铁》.
164. 于孟，张清东，李瑞，王波（2010）. R2级表面镀锡基板平整轧制过程表面粗糙度控制. 《钢铁》.
165. 文杰，张清东，饶志雄，路凤智（2010）. 四辊冷连轧机高强钢板形控制技术研究. 《轧钢》.DOI
166. Qingdong Zhang (2010). Effect of process parameters on the exit temperature of IN690 alloy tubes during hot extrusion. Journal of University of Science and Technology Beijing.
167. 张清东，孙彦广，尹忠俊，秦勤，曹建国，刘国勇，阳建宏，闫晓强，苏兰海（2009）. 冶金机械及自动化分学科发展. 《2008-2009冶金工程技术学科发展报告》.
168. 张清东，白剑，徐乐江，王康健，许健勇（2009）. 1420mm冷连轧机机型改进与板形控制能力扩展. 《钢铁》.
169. 郑武，张清东，王波（2009）. UCMW冷连轧机板形闭环控制模型优化研究. 《冶金设备》.
170. 戴杰涛，张清东，夏小明，张国河，卞皓（2009）. 梅钢热轧支持辊辊形遗传算法设计与极限规格板形改善. 《钢铁》.
171. 夏小明，张清东，戴杰涛，张永雪（2009）. 梅钢1422热连轧机组上游机架工作辊辊形研究. 《钢铁》.
172. 常铁柱，张清东，姜正连，吴彬，彭俊（2009）. 热镀锌过程边部过镀锌的有限元仿真. 《钢铁》.
173. Xiaofeng Zhang, Qingdong Zhang, Chaoyang Sun (2009). Gauge and tension control in unsteady state of cold rolling using mixed H2/H∞ control. International Conference on Control and Automation.DOI
174. 孙朝阳，曾攀，赵书行，张清东（2008）. 装甲防护厚板淬火过程形状畸变的预测. 《金属热处理》.
175. 黄河，张清东，文杰（2008）. 自动立式吊具外钳口内廓曲面形状优化设计. 《冶金设备》.
176. 张晓峰，张清东，黄佩杰，王康健，吴彬（2008）. 冷连轧机厚带头启动轧制张力控制模型改进研究. 《钢铁》.
177. 张清东，张晓峰，吴彬，彭俊，饶志雄（2008）. 连续退火线带钢张力控制数学模型研究. 《钢铁》.
178. 张清东，宫兆鸿，李博（2008）. UC冷轧机中间辊端部辊形设计研究. 《冶金设备》.
179. 张清东，郭帅科，白剑（2008）. VC支持辊板形调节原理与特性研究. 《冶金设备》.
180. 张新鹏，张清东，白剑，文杰（2008）. 冷轧带钢表面粗糙度预测模型研究. 《冶金设备》.
181. 常铁柱，张清东，丁军（2008）. 冷轧带钢卷取过程中受力与变形研究. 《钢铁》.
182. 李博，张清东（2008）. 四辊CVC冷带轧机板形预测控制研究. 《冶金设备》.
183. 王文广，张清东，吴彬，朱简如（2008）. 拉伸弯曲矫直机S辊组周期性打滑机理及对策研究. 《冶金设备》.
184. 阙月海，张清东，白剑，许健勇（2008）. 冷轧过程中带钢横向变形的研究. 《冶金设备》.
185. 徐兴刚，张清东，瞿标，李实（2008）. 基于遗传算法的森吉米尔轧机压下负荷分配法. 《冶金设备》.
186. 张连军，张清东，于孟（2008）. 20辊森吉米尔轧机板形调控性能研究. 《冶金设备》.
187. 张清东，徐兴刚，于孟，瞿标，李实（2008）. 基于遗传神经网络的不锈钢带冷轧轧制力模型. 《钢铁》.
188. Qingdong Zhang (2008). Loss of elongation in tension levelling of wide strip. Heavy Machinery.
189. 王文广，张清东，林秀贞，吴彬，朱简如（2007）. 拉伸弯曲矫直机S辊周期性打滑与带钢颤振研究. 《2007中国钢铁年会》.
190. 张清东，张晓峰，邹玉贤，彭俊，饶志雄（2007）. 连续退火线带钢张力控制数模的机理建模与仿真. 《2007中国钢铁年会论文集》.
191. 白剑，张清东，阙月海，李有元，许健勇（2007）. 冷连轧DI材基板的边部板形控制. 《2007中国钢铁年会》.
192. 张晓峰，张清东，王康健，黄佩杰，王欣（2007）. 冷连轧机启动轧制阶段带钢张力的动态仿真. 《2007中国钢铁年会》.
193. 于孟，张清东，沃海波，杜海宪，蒋伟挺，王福旭（2007）. 硬态不锈钢轧制表面硬度预报模型的研究. 《2007中国钢铁年会》.
194. 黄河，张清东，尹忠俊，戴学诚，王骏飞，周为民（2007）. 立式钢卷起吊过程表面夹伤仿真分析. 《2007中国钢铁年会》.
195. 张连军，张清东，叶乃威，李实，乔爱民，王庆强（2007）. 二十辊森吉米尔轧机辊系弹性变形有限元研究. 《2007中国钢铁年会》.
196. 杨轶婷，张清东，王文广，白剑（2007）. 带钢冷连轧轧件辊系一体化仿真研究. 《轧钢》.
197. 白剑，张清东，常铁柱，李有元，许健勇（2007）. 1420冷连轧机组第1机架板形控制目标曲线研究. 《钢铁》.
198. 周晓敏，张清东，王长松，吴平（2007）. UCMW轧机的边缘降自动控制系统及其优化. 《钢铁》.
199. 张清东，常铁柱，黄河，姜正连，吴彬（2007）. 全硬薄宽镀锌带钢的拉伸弯曲矫直工艺. 《钢铁》.
200. 周晓敏，张清东，王长松，吴平（2007）. UCMW轧机边降和平坦度的解耦控制. 《钢铁》.
201. 魏钢城，张清东，陈先霖（2007）. 2250mm带钢热连轧机板形调控性能改善与提高. 《钢铁》.
202. 张清东，刘天浩，王文广，朱简如（2007）. 宽带钢拉弯矫直工艺参数关系模型研究. 《钢铁》.
203. 常铁柱，张清东，姜正连，吴彬，彭俊（2007）. 全硬钢热镀锌板形控制工艺技术研究. 《2007中国钢铁年会论文集》.
204. 张国河，张清东，夏晓明，宫兆鸿，黄河（2007）. 1422粗轧带钢板廓形状变化仿真研究. 《冶金设备》.
205. 丁军，张清东，常铁柱，姜正连，吴彬（2007）. 基于神经网络的连续热镀锌线拉矫机工艺参数设定模型. 《冶金设备》.
206. 唐慕华，张清东，王文广（2007）. 1420冷连轧机穿带启动轧制工艺及过程仿真. 《冶金设备》.
207. Jiangbo Dai, Qingdong Zhang, Chang Tiezhu (2007). FEM analysis of large thermo-deflection of strips being processed in a continuous annealing furnace. International Journal of Minerals Metallurgy and Materials.DOI
208. Xiancui Liu, Lanhai Su, Li Zhong-Fu, Zhilin Fu, Qingdong Zhang, Chun He (2007). Elongation distribution between tension leveler and temper mill for pickling line 2030 in Baosteel. Frontiers of Mechanical Engineering in China.DOI
209. 张清东，白剑，常铁柱，邹玉贤，黄夏兰（2006）. 连续退火炉内带钢张力设定模型研究. 《钢铁》.
210. 张清东，常铁柱，姜正连（2006）. 带钢卷取过程中边波的产生与控制. 《2006中国金属学会青年学术年会论文集》.
211. 孙向明，张清东，白剑（2006）. 热轧来料楔形对冷连轧机组轧制状态的影响. 《轧钢》.
212. 刘天浩，张清东，朱简如（2005）. 宽带钢拉伸弯曲矫直变形过程的有限元仿真. 《2005中国钢铁年会》.
213. 张清东，孙林，陈先霖，刘本仁，吴炳火（2005）. 2800四辊轧机板形控制功能完善及雪橇板控制参数优化. 《冶金设备》.
214. 朱简如，吴平，张清东（2004）. UCMW冷连轧机辊系与轧件一体化仿真系统的开发. 《2004年全国炼钢、轧钢生产技术会议文集》.
215. 王文广，张清东，周晓敏，林秀贞，饶志雄，顾华中，李志勇（2004）. 酸洗连轧联合机组自动穿带系统研究. 《冶金设备》.
216. 何安瑞，张清东，杨荃，许健勇，姜正连，汪晨（2004）. 现代化冷连轧机的最佳机型配置. 《钢铁》.
217. 周西康，张清东，吴彬，王俊飞，吴文彬（2004）. DSR板形调控功效的ANSYS仿真. 《冶金设备》.
218. 吴越，张清东，刘军，戴江波（2003）. 冷轧带钢表面粗糙度实测研究. 《中国金属学会2003中国钢铁年会》.
219. 何安瑞，张清东，杨荃，许健勇，姜正连，汪晨（2003）. 宽带钢冷连轧机机型配置理论与应用. 《中国金属学会2003中国钢铁年会论文集（4）》.
220. 戴江波，张清东，陈先霖，王骏飞，张宝平（2003）. 连续退火炉内导向辊辊形对带钢张力横向分布影响的研究. 《中国金属学会2003中国钢铁年会论文集（4）》.
221. 孙林，张翔，吴炳火，杨贵娥，俞智华，张清东，陈先霖，何安瑞，戴江波（2003）. 2800mm四辊轧机工作辊和支持辊辊形的解耦同步设计. 《中国金属学会2003中国钢铁年会论文集（4）》.
222. 戴江波，张清东，陈先霖，孙林，张光新，张晨（2002）. 2800mm中厚板轧机轧制力模型研究. 《工程科学学报》.
223. 孙林，张清东，邵建生，戴江波，吴炳火，宋耀华，张光新，廖东骏，罗铭，段东明（2002）. 考虑板形的中板轧机负荷分配策略及模型的研究. 《钢铁研究》.
224. 孙林，张清东，陈先霖，王慧，邵建生，张翔，吴炳火，张华，周佩，俞智华（2002）. 中板轧机板形控制性能的研究. 《钢铁》.
225. 王骏飞，魏春生，张清东（2001）. 板带钢冷轧动态板形辊(DSR)技术的机理与实践. 《2001中国钢铁年会》.
226. 孙林，张清东，邵建生，戴江波，张光新，詹胜利，廖东骏，罗铭，刘克非（2001）. 可逆中板精轧机压下负荷分配策略和模型的研究. 《2001中国钢铁年会论文集（下卷）》.
227. 何安瑞，杨荃，张清东，魏钢城，杨金安（2001）. 热轧精轧机组工作辊热磨制度的研究. 《2001中国钢铁年会》.
228. 孙林，张清东，陈先霖，刘炳南，吴炳火，张晨（2001）. 2800四辊轧机“逆宽”轧制中的凸度控制. 《工程科学学报》.
229. 孙林，张清东，陈先霖，何安瑞，戴江波，吴炳火，宋耀华，张光新，俞智华，段东明（2001）. 2800四辊轧机工作辊磨损模型研究. 《冶金设备》.
230. 张清东，周晓敏，刘静涛（2001）. 冷轧带钢板形评价与统计方法. 《2001中国钢铁年会》.
231. 张清东，何安瑞，黄纶伟，陈先霖，魏钢城，黄四清（2001）. 板形控制与热轧带钢自由规程轧制. 《钢铁》.
232. 陈先霖，张杰，张清东，王长松，杨荃，刘本仁，王岭，魏钢城，黄四清，杨金安（2000）. 宽带钢热连轧机板形控制系统的开发. 《钢铁》.
233. 何安瑞，张清东，徐金梧，陈先霖，魏钢城，黄四清（2000）. 热轧工作辊磨损模型的遗传算法. 《钢铁》.
234. 王宏伟，陈先霖，张清东，魏钢城，黄四清（2000）. 宽带钢热连轧机多机架板形控制模型的探讨. 《冶金设备》.
235. 黄纶伟，陈先霖，张清东，陈守群，魏春生，吴彬，王骏飞（2000）. 板带冷轧机板形控制技术调控功效的比较研究. 《冶金设备》.
236. 顾云舟，张杰，张清东，华建新，魏春生，王骏飞，于孟生（2000）. 宝钢2030冷连轧机组1#～4#机架弯辊力的自动设定. 《冶金设备》.
237. 严洪凯，杜素周，张清东（2000）. CVC工作辊磨损和热凸度对轧机板形控制性能的影响. 《冶金设备》.
238. 何安瑞，张清东，曹建国，魏钢城，杨金安（1999）. 热轧精轧机组工作辊磨损分析及预报. 《冶金设备》.
239. 张清东，陈先霖，何安瑞，黄纶伟，徐乐江，华建新，徐耀寰，吴彬（1999）. 冷轧宽带钢板形检测与自动控制. 《钢铁》.
240. 包仲南，陈先霖，张清东，王岭，魏钢城，宋平，张京安（1999）. 带钢热连轧机工作辊热磨辊的研究. 《钢铁》.
241. 何安瑞，张清东（1998）. 热连轧精轧机组轧件走偏的探究. 《冶金设备》.
242. 杨荃，张清东，陈先霖（1993）. 冷轧带钢翘曲形状分析与浪形函数. 《钢铁》.

预印本

1. Hao Li, Lingling Hu, Qingdong Zhang (2025). The Effect of Residual Stress on the Fatigue Crack Propagation of 18crnimo7-6 Alloy Steel Under Different Stress Radio. SSRN Electronic Journal.DOI
2. Hao Li, Qingdong Zhang, Mingyang Yu (2023). The Indentation Shape of Vickers Indenter with Different Orientation on the Anisotropic Material. SSRN Electronic Journal.DOI