李聚波｜河南科技大学｜学者主页

2026

成形法加工斜齿轮铣削力动态模型构建及实验验证

李帅，李聚波，杨建军，蒋闯，耿龙龙，信稳，程波

《河南科技大学学报(自然科学版)》

DOI

2026

A multimodal fusion approach with temporal convolutional networks for bearing fault diagnosis

Haichao Cai, Wanrong Li, Yujun Xue, Jubo Li, Xiangyi Hu, Xiaokang Yang, Jun Ye

Engineering Research Express

DOI

2026

Two elastohydrodynamic lubrication models for point contact herringbone gear with numerical simulation

Ya-Li Liu, Jian-jun Yang, Fei Gong, Ju-Bo Li, Bingyang Wei, Chuang Jiang

Journal of tribology

DOI

2025

考虑中心构件浮动的复合行星轮系动态特性分析

杨建军，任延波，李聚波，蒋闯，信稳，程波

《河南科技大学学报(自然科学版)》

2025

Deviation and error compensation method for small module gears based on visual measurement

Jianjun Yang, Jiaxin Song, Aijun Xu, Jubo Li, Yinan Han, Miaojiang Ding

Measurement Science and Technology

DOI

2025

Calculation of Time-Varying Mesh Stiffness of Internal Mesh Transmission and Analysis of Influencing Factors

Jubo Li, Hengbo Zhao, Yanbo Ren, Jianjun Yang

Applied Sciences

DOI

2025

A lightweight design scheme for a heavy-duty planetary gear three-stage transmission system based on the SQP algorithm and the response surface method

Ju-Bo Li, Huijie Zhang, Yan-Bo Ren, Jianjun Yang, Wen Xin, Chuang Jiang

Engineering Research Express

DOI

2024

基于自助法的弧齿锥齿轮齿面修正

赵岩，李聚波，王松林，苏建新，李天兴，蒋闯

《机床与液压》

2024

剖分式直齿锥齿轮的数控加工运动求解

段新峰，王斌，房建垒，耿瑞广，赵贺龙，李喜燕，李聚波

《机床与液压》

2024

重载行星轮系安装误差对系统均载性能的影响

郭世超，李聚波，杨建军，信稳

《机电工程》

2024

Sensitivity analysis and compensation for tooth surface deviation of spiral bevel gear machine tool

Jianjun Yang, Linlin Si, Jubo Li, Wen Xin, Bo Zhao, Bingyang Wei

Scientific Reports

DOI

2023

车桥锥齿轮加工误差修正方法

李聚波，李天兴，代震，张阳，夏鑫博

《河南科技大学学报(自然科学版)》

2023

基于数字孪生模型的齿轮试验台状态监测方法

王松林，徐爱军，李聚波，赵东辉，王鼎贺，石付生，李天兴，蒋闯，苏建新，赵岩

《机械传动》

DOI

2023

最低形变能条件下摆线针轮承载啮合区间确定方法

李聚波，夏鑫博，李天兴，赵岩，张慧洁，赵恒博

《河南科技大学学报(自然科学版)》

2023

立铣刀侧铣加工剖分式直齿锥齿轮时的刀位求解

李聚波，赵岩，王斌，段新峰，房建垒，耿瑞广

《河南科技大学学报(自然科学版)》

2023

基于学科竞赛的大学生实践基地建设模式探索——以地方高校机械类大学为例

耿龙龙，李天兴，李聚波，王帅

《山西青年》

2023

An analytical method for the meshing performance of deviation surface of spiral bevel gear based on a one-dimensional probe

Tianxing Li, Zhen Dai, Yang Zhang, Xinbo Xia, Jian Yao, Jubo Li, Wang Bi

Measurement Science and Technology

DOI

2023

A Bootstrap-Based Tooth Surface Errors Statistics Methodology for Batch Hypoid Gears after Heat Treatment

Jubo Li, Weihao Sun, Yan Ke Zhao, Jianxin Su, Tianxing Li, Hengbo Zhao, Huijie Zhang

Processes

DOI

2023

A Digital Twin-Based State Monitoring Method of Gear Test Bench

Jubo Li, Songlin Wang, Jianjun Yang, Huijie Zhang, Hengbo Zhao

Applied Sciences

DOI

2023

Inertia matching of CNC cycloidal gear form grinding machine servo system

Jubo Li, Jianxin Su, Ming Gao, Donghui Zhao, Leilei Zhang, Dinghe Wang, Fusheng Shi

Mechanics & Industry

DOI

2023

Erratum to: Inertia matching of CNC cycloidal gear form grinding machine servo system

Jubo Li, Jianxin Su, Ming Gao, Donghui Zhao, Leilei Zhang, Dinghe Wang, Fusheng Shi, Chenxiao Yan

Mechanics & Industry

DOI

2022

批量弧齿锥齿轮热处理变形齿面偏差的自助法统计模型

孙维浩，李聚波，李天兴，蒋闯，王松林，苏建新

《机械传动》

DOI

2022

基于STEP设计齿廓的摆线泵转子误差检测

张瑞瑶，李天兴，李聚波，苏建新，周静远

《现代制造工程》

2022

基于专业认证的“热工基础”教学改革探索

聂少武，李天兴，苏建新，李聚波

《教育教学论坛》

2022

Calculation of Machining Parameters and Contact Simulationof High Reduction Hypoid Gear on Surface Synthesis

Li Jubo, WANG Yongqiang, WEI Bingyang, YANG Jianjun

Journal of Mechanical Engineering

DOI

2021

Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears

Wang Bi, Chenxiao Yan, Jubo Li, Peiyao Feng, Shuaipu Wang, Shuo Chen, Jianxin Su

Strojniški vestnik – Journal of Mechanical Engineering

DOI

2020

复合结构研齿换能器的动力学特性与设计

朱德荣，杨建军，邓效忠，李聚波

《振动、测试与诊断》

DOI

2020

An integration method of design and machining for spiral bevel gears based on universal CNC machine tools

Jubo Li, Zhenshan Gao, Pingze Zhang, Lixin Feng, Guoxian Yin, Huiliang Wang, Jianxin Su, Wensuo Ma

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2019

大重合度负传动弧齿锥齿轮的设计及承载性能分析

张华，李梦亚，魏冰阳，李聚波

《机床与液压》

2019

Curvature synthesis for face-milling spiral bevel gears with high-order transmission errors

Jianjun Yang, Bingyang Wei, Hua Zhang, Zhenghong Shi, Jubo Li, Teik Chin Lim

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2019

Information description and integration of spiral bevel gear manufacturing process under networked manufacturing mode

Jubo Li, Pingze Zhang, Lixin Feng, Guoxian Yin, Zhu Chen, Wensuo Ma, Aijun Xu, Shaowu Nie, Hua Zhang

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2018

RV减速器摆线轮齿面展成磨削模型构建及影响因素分析

李天兴，邢春荣，王国峰，苏建新，王会良，安小涛，李聚波

《机械传动》

2018

圆弧等高齿弧齿锥齿轮的设计与性能分析

张华，何帅旗，魏冰阳，李天兴，李聚波

《河南科技大学学报(自然科学版)》

2018

Influence of gear parameters on dynamic characteristics of an ultrasonic vibration system

De-Rong Zhu, Jianjun Yang, Xiaozhong Deng, Chuang Jiang, Jubo Li

Transactions of the Canadian Society for Mechanical Engineering

DOI

2018

A manufacturing error measurement methodology for a rotary vector reducer cycloidal gear based on a gear measuring center

Tianxing Li, Junxiang Zhou, Xiaozhong Deng, Jubo Li, Chunrong Xing, Jianxin Su, Huiliang Wang

Measurement Science and Technology

DOI

2018

Digitized Modeling and Machining Simulation of Equal Base Bevel Gear

Bin Wang, Yunpeng He, Peiyao Feng, Xun Sun, Aijun Xu, Jubo Li, Tianxing Li, Xinjie Jia, Bo Zhang

ITM Web of Conferences

DOI

2017

弧齿锥齿轮齿面拓扑修形及加工参数计算

聂少武，邓静，邓效忠，张华，曹雪梅，李聚波

《航空动力学报》

2017

基于MATLAB的指形铣刀加工等基圆齿面三维造型验证

王斌，范明星，徐爱军，李聚波，李天兴

《机床与液压》

2017

Research on gear tooth forming control in the closed die hot forging of spiral bevel gear

Zhenshan Gao, Jubo Li, Xiaozhong Deng, Jianjun Yang, Fuxiao Chen, Aijun Xu, Lei Li

The International Journal of Advanced Manufacturing Technology

DOI

2017

A new digitized reverse correction method for hypoid gears based on a one-dimensional probe

Tianxing Li, Jubo Li, Xiaozhong Deng, Jianjun Yang, Genggeng Li, Wensuo Ma

Measurement Science and Technology

DOI

2016

弧齿锥齿轮与摆线齿锥齿轮统一数学模型及齿面比较

聂少武，邓效忠，魏冰阳，李聚波

《机械传动》

2016

奥利康制摆线齿锥齿轮切齿计算与啮合仿真软件开发

聂少武，邓效忠，张华，魏冰阳，李聚波

《机械传动》

2016

从动弧齿锥齿轮的精锻工艺与精锻加工试验

张华，陈建飞，杨建军，李天兴，李聚波

《机械传动》

2016

面向螺旋锥齿轮网络化闭环制造的集成系统框架

李聚波，徐爱军，高振山，杨建军，张华，王斌

《组合机床与自动化加工技术》

2016

An approach to realize the networked closed-loop manufacturing of spiral bevel gears

Jubo Li, Hui-Jie Ma, Xiaozhong Deng, Hua Zhang, J.J. Yang, Kai Xu, Tian-Xing Li, Ai-Jun Xu, Huiliang Wang

The International Journal of Advanced Manufacturing Technology

DOI

2016

Cutter position calculation of machining equal base circle bevel gears with a pot-shaped milling cutter

Wang Bi, Mingxing Fan, Xun Sun, Jubo Li, Aijun Xu, Genggeng Li, Jianjun Yang

The International Journal of Advanced Manufacturing Technology

DOI

2016

動弧歯Zhui歯車の精密化プロセスと精密加工試験【JST・京大機械翻訳】

Hua Zhang, Jian-Fei Chen, Jianjun Yang, Tian-Xing Li, Ju-Bo Li

2016

A novel lean flank designing methodology for spiral bevel gears

Xue-Mei Cao, Xin He, Shao-Wu Nie, Ju-Bo Li

DOI

2015

机械优化设计课程教学探索与实践

李聚波，贾新杰，邱明

《科技资讯》

DOI

2015

基于网络的弧齿锥齿轮数字化加工技术研究

李聚波，李更更，蒋闯，徐恺，张华，李天兴

《机械传动》

2015

螺旋锥齿轮网络化闭环制造的通信控制系统研究

李聚波，徐爱军，徐恺，李天兴，张华

《组合机床与自动化加工技术》

2015

面向“成果导向教育”的特种加工课程教学设计与探讨

贾新杰，李聚波，王会良

《科技资讯》

2015

A network-based manufacturing model for spiral bevel gears

Jing Deng, Jubo Li, Xiaozhong Deng

Journal of Intelligent Manufacturing

DOI

2015

The theoretical and experimental research of machining equal base circle bevel gears with a pot-shaped milling cutter

Jing Deng, Wang Bi, Xiaozhong Deng, Jubo Li

Journal of Advanced Mechanical Design Systems and Manufacturing

DOI

2015

Closed-Loop Feedback Flank Errors Correction of Topographic Modification of Helical Gears Based on Form Grinding

Huiliang Wang, Jubo Li, Yang Gao, Jianjun Yang

Mathematical Problems in Engineering

DOI

2015

Mathematical Model of Helical Gear Topography Measurements and Tooth Flank Errors Separation

Huiliang Wang, Xiaozhong Deng, Jianhai Han, Jubo Li, Jianjun Yang

Mathematical Problems in Engineering

DOI

2015

Dynamic Assessment of Vibration of Tooth Modification Gearbox Using Grey Bootstrap Method

Hui-Liang Wang, Xiaozhong Deng, Ju-Bo Li, Jianjun Yang

DOI

2013

通用采集卡在锥齿轮传动误差测量中的应用

徐爱军，李天兴，邓效忠，李聚波，徐恺

《河南科技大学学报(自然科学版)》

2013

螺旋锥齿轮网络化制造关键技术研究

李聚波

《江苏大学》

2013

齿距啮合偏差对准双曲面齿轮传动误差的影响

邓效忠，徐爱军，张静，李聚波，杨建军

《航空动力学报》

2012

基于时钟细分法的弧齿锥齿轮传动误差测量研究

徐爱军，邓效忠，徐恺，李聚波，张静

《机械传动》

2012

准双曲面齿轮振动噪声试验与预估分析研究

徐爱军，邓效忠，张静，李聚波，聂少武

《机械设计》

2012

A New Numerical Algorithm for Transmission Error Measurement at Gears Meshing

Ai-Jun Xu, Xiao-Zhong Deng, Jing Zhang, Kai Xu, Ju-Bo Li

DOI

2011

偏置斜齿面齿轮几何设计及齿宽特性分析

李大庆，邓效忠，魏冰阳，李聚波，李天兴

《机械设计》

2011

螺旋锥齿轮齿面误差分析与自动反馈修正

李天兴，邓效忠，李聚波，杨建军

《航空动力学报》

2011

Design of multichannel card oriented to hypoid gear measurement

Aijun Xu, Xiaozhong Deng, Jing Zhang, Jubo Li

International Conference on Computer Science and Service System

DOI

2011

System of Automatic Correction and Measurement for Hypoid Gears

Tian-Xing Li, Xiao-Zhong Deng, Zhen-Shan Gao, Ju-Bo Li

DOI

2010

基于数控弧齿锥齿轮铣齿机的齿面修正

张华，曹雪梅，杨建军，李聚波

《机械传动》

2010

齿轮企业基于面向服务架构的应用集成框架与实现

李聚波，邓效忠，徐爱军，李天兴，张华

《计算机应用研究》

2010

A web services-based approach to develop a networked information integration service platform for gear enterprise

Jianjun Yang, Jubo Li, Xiaozhong Deng, Kai Xu, Hua Zhang

Journal of Intelligent Manufacturing

DOI

2010

Notice of Retraction: Integrated control model for networked manufacturing enterprise

Qianjin Zhang, Jubo Li, Tianxing Li

DOI

2010

Sharing and integration of gear manufacturing information based on XML and Web services.

Ju-Bo Li, Xiao-Zhong Deng, Ai-Jun Xu, Tian-Xing Li, Zhen-Shan Gao

2010

Networked Information Integrated Service Platform for Gear Enterprise

Ju-Bo Li, Xiao-Zhong Deng, Tian-Xin Li

DOI

2009

面向网络化制造的企业集成控制模型研究

李剑锋，李红涛，李聚波，王丽芹，葛运旺

《工具技术》

2009

基于MAS与Web服务的网络化集成制造技术研究

王丽芹，李剑锋，李聚波

《工具技术》

2009

网络化制造企业的异构系统集成控制模型

李聚波，邓效忠，徐爱军，张华

《小型微型计算机系统》

2009

齿轮成型磨削的分度补偿技术研究

马艳，李聚波，张洛平，吴雨擎

《世界制造技术与装备市场》

2008

大型齿轮成型磨削的分度误差补偿技术研究

李聚波，邓效忠，张洛平

《机械传动》

2008

齿轮成形磨削的分度补偿技术

马艳，吴雨擎，李聚波，张洛平

《汽车工艺师》

2006

齿轮传动精度的分析与计算

李聚波，贺红霞，张洛平，杨晓蔚，李剑锋

《煤矿机械》

2006

正交车铣运动模型的研究

李剑锋，张洛平，李聚波，仲志丹，王磊

《煤矿机械》

2005

数控齿轮分度机构传动链的误差分析

李聚波，张洛平，杨晓蔚，李剑锋

《组合机床与自动化加工技术》

2005

基于PC的开放式数控系统研究

李剑锋，张洛平，李济顺，李聚波

《机械工程师》

2005

Error Analysis of Transmission Chain of Numerical Control Graduation Organization

Ju-Bo Li

精选作品

期刊论文

成形法加工斜齿轮铣削力动态模型构建及实验验证

A multimodal fusion approach with temporal convolutional networks for bearing fault diagnosis

Two elastohydrodynamic lubrication models for point contact herringbone gear with numerical simulation

考虑中心构件浮动的复合行星轮系动态特性分析

Deviation and error compensation method for small module gears based on visual measurement

Calculation of Time-Varying Mesh Stiffness of Internal Mesh Transmission and Analysis of Influencing Factors

A lightweight design scheme for a heavy-duty planetary gear three-stage transmission system based on the SQP algorithm and the response surface method

基于自助法的弧齿锥齿轮齿面修正

剖分式直齿锥齿轮的数控加工运动求解

重载行星轮系安装误差对系统均载性能的影响

Sensitivity analysis and compensation for tooth surface deviation of spiral bevel gear machine tool

车桥锥齿轮加工误差修正方法

基于数字孪生模型的齿轮试验台状态监测方法

最低形变能条件下摆线针轮承载啮合区间确定方法

立铣刀侧铣加工剖分式直齿锥齿轮时的刀位求解

基于学科竞赛的大学生实践基地建设模式探索——以地方高校机械类大学为例

An analytical method for the meshing performance of deviation surface of spiral bevel gear based on a one-dimensional probe

A Bootstrap-Based Tooth Surface Errors Statistics Methodology for Batch Hypoid Gears after Heat Treatment

A Digital Twin-Based State Monitoring Method of Gear Test Bench

Inertia matching of CNC cycloidal gear form grinding machine servo system

Erratum to: Inertia matching of CNC cycloidal gear form grinding machine servo system

批量弧齿锥齿轮热处理变形齿面偏差的自助法统计模型

基于STEP设计齿廓的摆线泵转子误差检测

基于专业认证的“热工基础”教学改革探索

Calculation of Machining Parameters and Contact Simulationof High Reduction Hypoid Gear on Surface Synthesis

Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears

复合结构研齿换能器的动力学特性与设计

An integration method of design and machining for spiral bevel gears based on universal CNC machine tools

大重合度负传动弧齿锥齿轮的设计及承载性能分析

Curvature synthesis for face-milling spiral bevel gears with high-order transmission errors

Information description and integration of spiral bevel gear manufacturing process under networked manufacturing mode

RV减速器摆线轮齿面展成磨削模型构建及影响因素分析

圆弧等高齿弧齿锥齿轮的设计与性能分析

Influence of gear parameters on dynamic characteristics of an ultrasonic vibration system

A manufacturing error measurement methodology for a rotary vector reducer cycloidal gear based on a gear measuring center

Digitized Modeling and Machining Simulation of Equal Base Bevel Gear

弧齿锥齿轮齿面拓扑修形及加工参数计算

基于MATLAB的指形铣刀加工等基圆齿面三维造型验证

Research on gear tooth forming control in the closed die hot forging of spiral bevel gear

A new digitized reverse correction method for hypoid gears based on a one-dimensional probe

弧齿锥齿轮与摆线齿锥齿轮统一数学模型及齿面比较

奥利康制摆线齿锥齿轮切齿计算与啮合仿真软件开发

从动弧齿锥齿轮的精锻工艺与精锻加工试验

面向螺旋锥齿轮网络化闭环制造的集成系统框架

An approach to realize the networked closed-loop manufacturing of spiral bevel gears

Cutter position calculation of machining equal base circle bevel gears with a pot-shaped milling cutter

動弧歯Zhui歯車の精密化プロセスと精密加工試験【JST・京大機械翻訳】

A novel lean flank designing methodology for spiral bevel gears

机械优化设计课程教学探索与实践

基于网络的弧齿锥齿轮数字化加工技术研究

螺旋锥齿轮网络化闭环制造的通信控制系统研究

面向“成果导向教育”的特种加工课程教学设计与探讨

A network-based manufacturing model for spiral bevel gears

The theoretical and experimental research of machining equal base circle bevel gears with a pot-shaped milling cutter

Closed-Loop Feedback Flank Errors Correction of Topographic Modification of Helical Gears Based on Form Grinding

Mathematical Model of Helical Gear Topography Measurements and Tooth Flank Errors Separation

Dynamic Assessment of Vibration of Tooth Modification Gearbox Using Grey Bootstrap Method

通用采集卡在锥齿轮传动误差测量中的应用

螺旋锥齿轮网络化制造关键技术研究

齿距啮合偏差对准双曲面齿轮传动误差的影响

基于时钟细分法的弧齿锥齿轮传动误差测量研究

准双曲面齿轮振动噪声试验与预估分析研究

A New Numerical Algorithm for Transmission Error Measurement at Gears Meshing

偏置斜齿面齿轮几何设计及齿宽特性分析

螺旋锥齿轮齿面误差分析与自动反馈修正

Design of multichannel card oriented to hypoid gear measurement

System of Automatic Correction and Measurement for Hypoid Gears

基于数控弧齿锥齿轮铣齿机的齿面修正

齿轮企业基于面向服务架构的应用集成框架与实现

A web services-based approach to develop a networked information integration service platform for gear enterprise

Notice of Retraction: Integrated control model for networked manufacturing enterprise

Sharing and integration of gear manufacturing information based on XML and Web services.

Networked Information Integrated Service Platform for Gear Enterprise

面向网络化制造的企业集成控制模型研究

基于MAS与Web服务的网络化集成制造技术研究

网络化制造企业的异构系统集成控制模型

齿轮成型磨削的分度补偿技术研究

大型齿轮成型磨削的分度误差补偿技术研究