周性坤｜大连海事大学｜学者主页

2026

Research on deep-sea mining risers damage identification based on Multi-Scale Squeeze-and-Excitation Residual Network

Yaning Dou, Wenhua Li, Haoran Ye, G F Li, Shanying Lin, Xingkun Zhou

Ocean Engineering

DOI

2026

Numerical study on the VIV response of a deep-sea mining riser considering time-varying axial tension and the combined effects of internal and external flows

Yan Li, Wenhua Li, Xingkun Zhou, Yaning Dou, Xiantao Zhang

Ocean Engineering

DOI

2025

Numerical analysis of parametric excitation characteristics of a deep-sea mining riser under vessel heave motions

Yan Li, Xingkun Zhou, Yaning Dou, Huade Cao, Wenhua Li

Ocean Engineering

DOI

2024

Numerical analysis of dynamic and fatigue characteristics of deep-sea mining riser considering irregular waves and currents

Yan Li, Xingkun Zhou, Yaning Dou, Xiantao Zhang, Wenhua Li

Ocean Engineering

DOI

2024

A novel damage index for crack identification of a drilling riser during deployment based on the modal vibration energy flow

Xingkun Zhou, Yan Li, Yaning Dou, Xiantao Zhang

Geoenergy Science and Engineering

DOI

2024

Dynamic Response Analysis of a Subsea Rigid M-Shaped Jumper under Combined Internal and External Flows

Guangzhao Li, Wenhua Li, Shanying Lin, Fenghui Han, Xingkun Zhou

Journal of Marine Science and Engineering

DOI

2024

Interpretable machine learning approaches for damage identification in drilling risers

Zhengguang Ge, Xingkun Zhou, Yan Li, Xiantao Zhang, Wenhua Li

Ocean Engineering

DOI

2024

Flow pattern evolution and flow-induced vibration response in multiphase flow within an M-shaped subsea jumper

Wenrui Song, Wenhua Li, Shanying Lin, Xingkun Zhou, Fenghui Han

Ocean Engineering

DOI

2023

基于多通道卷积神经网络的液压系统多故障诊断

李文华，牛国波，刘羽佳，周性坤，林珊颖，葛杨元

《组合机床与自动化加工技术》

2023

Experimental investigation and one-way coupled fluid-structure interaction analysis of gas-liquid two-phase flow conveyed by a subsea rigid M-shaped jumper

Guangzhao Li, Wenhua Li, Wenhua Li, Fenghui Han, Shanying Lin, Xingkun Zhou

Ocean Engineering

DOI

2023

Hydraulic system fault diagnosis of the chain jacks based on multi-source data fusion

Yujia Liu, Wenhua Li, Shanying Lin, Xingkun Zhou, Yangyuan Ge

Measurement

DOI

2022

锚链提升器水平液压管内气泡流型及其对边界层速度梯度影响分析

李文华，隆利，刘羽佳，周性坤，林珊颖，葛杨元

《液压与气动》

2022

深海绞车系统收放缆过程及动力行为

李文华，柯思诚，宋晓华，张洪欣，周性坤，杨宇

《船舶工程》

2022

Numerical evaluation of the coupled/uncoupled effects of lower marine riser package and/or blowout preventer with a lower flex joint in a hang-off drilling riser

Xingkun Zhou, Yan Li, Jinghao Chen, Wenhua Li, Menglan Duan

Ocean Engineering

DOI

2022

Modal state vectors of a free-hanging drilling riser during deployment and retrieval

Xingkun Zhou, Zhengguang Ge, Jinghao Chen, Wenhua Li

Journal of Petroleum Exploration and Production Technology

DOI

2022

NUMERICAL INVESTIGATIONS ON THE EFFECTS OF SEABED SHALLOW SOILS ON A TYPICAL DEEPWATER SUBSEA WELLHEAD SYSTEM

Xingkun Zhou, Jinghao Chen, Zhengguang Ge, Tong Zhao, Wenhua Li

Brodogradnja

DOI

2021

锚链和锚链轮刚柔耦合动力学建模及啮合过程力学分析

李文华，刘雄雁，林珊颖，周性坤，韩凤翚，潘瑞祥

《船海工程》

2021

锚泊定位系统锚链轮及其机架强度有限元分析

李文华，牛国波，韩凤翚，李根，周性坤，葛杨元

《机电设备》

DOI

2021

A Variable-Tensioned Transfer Matrix Method for Modal Analysis of Marine Risers and Its Application to Structural Damage Detection

Xingkun Zhou, Yuqing Sun, Wenhua Li

KSCE Journal of Civil Engineering

DOI

2021

A continuous stiffness approach for modeling edge-cracked beams with different cross-sections based on energy theory

Xingkun Zhou, Jinghao Chen, Wenhua Li, Yuqing Sun

Journal of mechanics of materials and structures

DOI

2021

Effects of breathing cracks on the dynamic characteristics of a drilling riser under irregular waves and the crack identification

Xingkun Zhou, Yuqing Sun, Wenhua Li

AIP Advances

DOI

2020

基于边界层理论的船舶液压管路污染等级评估研究

李文华，施雨，龙培基，林珊颖，周性坤，王国有，孙玉清

《机床与液压》

2020

Numerical investigation on crack identification using natural frequencies and mode shapes of a drilling riser during deployment and retrieval

Xingkun Zhou, Yuqing Sun, Menglan Duan, Wenhua Li

Journal of Petroleum Science and Engineering

DOI

2019

变张力传递矩阵法在海洋立管模态分析中的应用

李文华，周性坤，孙玉清，段梦兰

《中国造船》

2019

缆松弛补偿器液压管路边界层厚度与温度耦合关系仿真分析

李文华，隆利，龙培基，韩凤翚，周性坤，林珊颖，孙玉清

《船海工程》

2019

缆松弛补偿器液压系统传感器布置的仿真分析与优化

李文华，施雨，刘毅，周性坤，林珊颖，韩凤翚，孙玉清

《船海工程》

2019

液压系统乳化时管路边界层与系统参数的关系

李文华，柯思诚，龙培基，周性坤，林珊颖，孙玉清

《船舶工程》

DOI

2018

基于微分变换法的海洋立管模态参数影响分析

陈文礼，周性坤，郑苗子，段梦兰

《石油机械》

2017

浮力筒对自由站立式刚性主管轴向振动的影响

周性坤，段梦兰

《石油机械》

2015

钻井隔水管接头结构参数对其强度的影响研究

庹鑫，段梦兰，刘秉奇，周性坤，刘尧

《石油机械》

2015

J型铺设升沉运动下管道动态响应分析

焦晓楠，陈晓芳，段梦兰，周性坤，杨伟

《石油机械》

2015

隔水管快速接头强度及疲劳参数敏感性分析

庹鑫，段梦兰，刘秉奇，周性坤，陈景皓，袁宇翔，刘凯

《石油机械》

周性坤

精选作品

期刊论文

Research on deep-sea mining risers damage identification based on Multi-Scale Squeeze-and-Excitation Residual Network

Numerical study on the VIV response of a deep-sea mining riser considering time-varying axial tension and the combined effects of internal and external flows

Numerical analysis of parametric excitation characteristics of a deep-sea mining riser under vessel heave motions

Numerical analysis of dynamic and fatigue characteristics of deep-sea mining riser considering irregular waves and currents

A novel damage index for crack identification of a drilling riser during deployment based on the modal vibration energy flow

Dynamic Response Analysis of a Subsea Rigid M-Shaped Jumper under Combined Internal and External Flows

Interpretable machine learning approaches for damage identification in drilling risers

Flow pattern evolution and flow-induced vibration response in multiphase flow within an M-shaped subsea jumper

基于多通道卷积神经网络的液压系统多故障诊断

Experimental investigation and one-way coupled fluid-structure interaction analysis of gas-liquid two-phase flow conveyed by a subsea rigid M-shaped jumper

Hydraulic system fault diagnosis of the chain jacks based on multi-source data fusion

锚链提升器水平液压管内气泡流型及其对边界层速度梯度影响分析

深海绞车系统收放缆过程及动力行为

Numerical evaluation of the coupled/uncoupled effects of lower marine riser package and/or blowout preventer with a lower flex joint in a hang-off drilling riser

Modal state vectors of a free-hanging drilling riser during deployment and retrieval

NUMERICAL INVESTIGATIONS ON THE EFFECTS OF SEABED SHALLOW SOILS ON A TYPICAL DEEPWATER SUBSEA WELLHEAD SYSTEM

锚链和锚链轮刚柔耦合动力学建模及啮合过程力学分析

锚泊定位系统锚链轮及其机架强度有限元分析

A Variable-Tensioned Transfer Matrix Method for Modal Analysis of Marine Risers and Its Application to Structural Damage Detection

A continuous stiffness approach for modeling edge-cracked beams with different cross-sections based on energy theory

Effects of breathing cracks on the dynamic characteristics of a drilling riser under irregular waves and the crack identification

基于边界层理论的船舶液压管路污染等级评估研究

Numerical investigation on crack identification using natural frequencies and mode shapes of a drilling riser during deployment and retrieval

变张力传递矩阵法在海洋立管模态分析中的应用

缆松弛补偿器液压管路边界层厚度与温度耦合关系仿真分析

缆松弛补偿器液压系统传感器布置的仿真分析与优化

液压系统乳化时管路边界层与系统参数的关系

基于微分变换法的海洋立管模态参数影响分析

浮力筒对自由站立式刚性主管轴向振动的影响

钻井隔水管接头结构参数对其强度的影响研究

J型铺设升沉运动下管道动态响应分析

隔水管快速接头强度及疲劳参数敏感性分析

研究方向