百晓学者学者目录

顾轶卓

北京航空航天大学材料科学与工程学院

精选作品

期刊论文

  1. Zongqi Yang, Yizhuo Gu, You Shi, Xin Zhou, Yibin Li (2026). Enhanced Mechanical Properties of Carbon Fiber Reinforced Phthalonitrile Resin Matrix Composites at Elevated Temperature via Cyano‐Functionalized Graphene Oxide. Polymer Composites.DOI
  2. Ningqi Lu, Hongkun Gao, Yizhuo Gu, Hongtong Dou, Yuxia Li (2026). Mechanical Properties of Carbon Fiber and Polyimide Fiber Hybrid Reinforced Polyimide Resin Matrix Composites at Room and High Temperatures. Polymers.DOI
  3. Wei Zhang, Hao Fu, Quansheng Ma, S Wang, Yizhuo Gu, Yanjie Wang, Wei Zhang, Min Li (2026). Mechanical property degradation of fine z-pin reinforced polymer composites under substitute ocean water environment. Journal of Materials Research and Technology.DOI
  4. Tianshu Li, Fenghui Shi, Hongchen Yan, M. Li, Shaokai Wang, Yizhuo Gu, Baoyan Zhang (2026). Multiscale Interlaminar Enhancement of CNT Network/CF Hybrid Composites and In Situ Monitoring of Crack Propagation Behavior. Polymers.DOI
  5. Jichao Chen, Jiping Yang, Zhiyong Ma, Zhijian Wang, Yizhuo Gu (2026). High-Performance Polyimides with Enhanced Solubility and Thermal Stability for Biomimetic Structures in Extreme Environment. Biomimetics.DOI
  6. 张威，李敏，毕浩宇，周钰博，王绍凯，李庆辉，韩建超，顾轶卓（2025）. 碳纳米管协同六亚甲基四胺增韧改性酚醛树脂及其性能研究. 《复合材料学报》.DOI
  7. 范燕生，顾轶卓，王俊涛，石亮，王绍凯，李敏（2025）. 吸湿耦合四点弯曲载荷条件下碳纤维复合材料的性能演变规律. 《复合材料学报》.DOI
  8. 吴俊勇，顾轶卓，杨中甲，刘新宇，曾慧，王绍凯，李敏（2025）. 缠绕张力对T800级碳纤维力学性能转化率的影响. 《复合材料学报》.DOI
  9. 王绍凯，李敏，周钰博，顾轶卓（2025）. 基于虚拟仿真实验的复合材料成型工艺教学探索. 《教育教学论坛》.
  10. Benben Liu, Yizhuo Gu, Ruiqi Guo, Shaokai Wang, Min Li (2025). Multilayer design and multi-objective optimization of neutron shielding composites by means of MCNP simulation and machine learning. Composites Science and Technology.DOI
  11. Jiawen Li, Wei Zhang, Yizhuo Gu, Shaokai Wang, Min Li, Yanjie Wang (2025). Tailoring dielectric and mechanical properties of hollow glass microspheres-modified quartz fiber/hyperbranched polyetherketoneketone laminated composites. Composites Part B Engineering.DOI
  12. Yansheng Fan, Min Li, Yizhuo Gu, Shaokai Wang, Yanjie Wang (2025). Enhancement mechanism for Z ‐pin on carbon fiber composite. Polymer Composites.DOI
  13. Fengyong Guo, Yining Zhang, Fengdan Cui, Shaokai Wang, Qidan Wang, Zilan He, Jian Zhang, Yizhuo Gu, Min Li (2025). Effect of the construction of α-Al2O3 interface layer on the interfacial properties of Alumina fiber/Alumina-silica composites. Next research..DOI
  14. Yizhuo Gu, Ruiqi Guo, Yubo Zhou, Shaokai Wang, Li Min (2025). Effects of porogen content on curing process and performances of needled fiber preform reinforced phenolic aerogel composite using process simulation and comprehensive experiments. Composites Part A Applied Science and Manufacturing.DOI
  15. Haisheng Wu, Yizhuo Gu, Xinyu Liu, Chaobo Xin (2025). Frontal Polymerization of Epoxy Resins: Kinetic Modeling, Rate Regulation and Curing Process Simulation for Space Manufacturing Applications. Polymers.DOI
  16. Yi Shi, Beibei Wang, Kui Du, Yanan Liu, Ruiqi Kang, Shaokai Wang, Jiayu Zhang, Yizhuo Gu, Min Li (2025). Process Monitoring for Vacuum-Assisted Resin Infusion by Using Carbon Nanotube-Based Sensors. Polymers.DOI
  17. Yizhuo Gu, Benben Liu, Zhongjia Yang, Shaokai Wang, Min Li (2025). Multiscale design and fabrication of neutron shielding composites via boron-based polymers and layer-by-layer assembly of graphene oxide/B₄C on carbon fiber. Journal of Materials Research and Technology.DOI
  18. 武海生，罗锦涛，顾轶卓，孙天峰，刘佳，姚旗，黎昱（2024）. 高模量碳纤维复合材料管件高低温交变环境结构稳定性研究. 《复合材料科学与工程》.
  19. 高瑞杰，齐磊，郭瑞琪，顾轶卓，王绍凯，李敏（2024）. 纤维增强树脂基复合材料成型工艺在线监测方法研究进展. 《复合材料科学与工程》.
  20. 罗靓，白鹤宇，叶卓然，顾轶卓（2024）. 蜂窝夹层声衬材料宽频吸声性能优化. 《复合材料学报》.
  21. 刘雨舜，魏筱霖，刘奔奔，顾轶卓（2024）. 含钨粉体改性三维间隔连体织物复合材料γ射线屏蔽性能研究. 《复合材料科学与工程》.
  22. 周钰博，李敏，王绍凯，顾轶卓，陶飞，陈祥宝，张佐光（2024）. 面向AI时代的纤维增强树脂基复合材料工艺仿真. 《航空材料学报》.
  23. Zongqi Yang, Yizhuo Gu, Yuwei Liu, Maoyuan Li, Shaokai Wang, Min Li (2024). Thermal-oxidative aging mechanism of carbon fiber reinforced self-catalytic phthalonitrile resin matrix composite laminates at 450 ℃ ∼ 500 ℃. Composites Part A Applied Science and Manufacturing.DOI
  24. Ruiqi Guo, Yizhuo Gu, Yaofei Lei, Jia Shuo Liu, Shaokai Wang, Li Min (2024). Effects of crosslinker concentration on curing process and performances of needled fiber preform reinforced phenolic aerogel composite using process simulation and comprehensive experiments. Composites Part A Applied Science and Manufacturing.DOI
  25. Fei Xing, Zilan He, Shaokai Wang, Yizhuo Gu, Jianchao Han, Yanjie Wang, Wei Zhang, Min Li (2024). Nano‐particles doped carbon nanotube films for in‐situ monitoring of temperature and strain during the processing of carbon fiber/epoxy composites. Polymer Composites.DOI
  26. Yanjie Wang, Weitao Liang, Diyi Hao, Min Li, Haining Chen, Yizhuo Gu, Shaokai Wang (2024). Flexible, Stable, and Efficient Counter Electrode for Quantum-Dot-Sensitized Solar Cells Based on Carbon Nanotube Films. ACS Applied Materials & Interfaces.DOI
  27. Ruiqi Guo, Yizhuo Gu, Yubo Zhou, Shaokai Wang, Min Li (2024). On-line cure monitoring of phenol formaldehyde resin using embedded fiber Bragg grating sensor. Materials Today Communications.DOI
  28. Xiao Wang, Haipeng Liu, Yanjie Wang, Li Li, Kai Feng Li, Yizhuo Gu, Guojie Liang, Shaokai Wang, Min Li (2024). Experimental and numerical investigations of mesophase pitch-based carbon foam used for thermal conductivity enhancement of paraffinic phase change materials. Materials Today Communications.DOI
  29. Ruiqi Kang, Shaokai Wang, Yang Liu, H. Ye, Min Li, Yizhuo Gu (2024). Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites. Heliyon.DOI
  30. 罗雅煊，董亚丽，李露，郑瑞晓，顾轶卓，杨景兴（2023）. 基于数字图像相关方法的SiCf/SiC陶瓷基复合材料力学行为表征. 《航空材料学报》.
  31. 李天舒，王绍凯，武清，顾轶卓，李庆辉，李敏（2023）. 宇航级T800碳纤维复合材料界面调控. 《北京航空航天大学学报》.
  32. 周钰博，李敏，王绍凯，顾轶卓，陈祥宝（2023）. 复合材料数字孪生及其在制造过程中的应用. 《纤维复合材料》.
  33. Jiaxing Zhang, Wei Zhang, Shaokai Wang, Fei Xing, Yizhuo Gu, Yanjie Wang, Min Li (2023). Infiltration monitoring using carbon nanotube buckypaper for the characterization of out‐of‐plane unsaturated permeability. Polymer Composites.DOI
  34. Benben Liu, Yizhuo Gu, Yushun Liu, Shaokai Wang, Min Li (2023). Space neutron radiation shielding property of continuous fiber and functional filler reinforced polymer composite using Monte Carlo simulation. Composites Part A Applied Science and Manufacturing.DOI
  35. Min Li, Fei Xing, Tianshu Li, Shaokai Wang, Yizhuo Gu, Wei Zhang, Yanjie Wang, Qinghui Li (2023). Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites. Polymer Composites.DOI
  36. Yuwei Liu, Yizhuo Gu, Shaokai Wang, Min Li (2023). Optimization for testing conditions of inverse gas chromatography and surface energies of various carbon fiber bundles. Carbon letters.DOI
  37. Yubo Zhou, Min Li, Qiao Cheng, Shaokai Wang, Yizhuo Gu, Xiangbao Chen (2023). Quantitative relations between curing processes and local properties within thick composites based on simulation and machine learning. Materials & Design.DOI
  38. 王绍凯，顾轶卓，石一，刘海朋，李敏（2022）. 基于复合材料学生竞赛的实验实践教学研究. 《第三届全国高等学校航空航天类专业教育教学研讨会论文集》.DOI
  39. 李敏，王奇丹，顾轶卓，王绍凯，崔影，李庆辉，张佐光（2022）. 自动铺丝用预浸窄带的质量分析及其影响因素. 《复合材料学报》.
  40. 陈晓妍，刘千立，戴晶滨，王晓蕾，田杰，王绍凯，李敏，顾轶卓（2022）. 中间相沥青基碳纤维表面特性和界面粘结性能. 《上海航天(中英文)》.
  41. 叶卓然，罗靓，潘海燕，顾轶卓（2022）. 超高分子量聚乙烯纤维及其复合材料的研究现状与分析. 《复合材料学报》.
  42. Zihong Wu, Yan Ming Zhao, Kang Yang, Juan Guan, Shaokai Wang, Yizhuo Gu, Min Li, Yiyu Feng, Wei Feng, Robert O. Ritchie (2022). Enhancing the Mechanical Performance of Fiber‐Reinforced Polymer Composites Using Carbon Nanotubes as an Effective Nano‐Phase Reinforcement. Advanced Materials Interfaces.DOI
  43. Shuo Wang, Min Li, Zhe Che, Shaokai Wang, Yizhuo Gu, Wei Zhang (2022). Balance interlaminar improvement and in-plane adverse impact of hexagonal semi-embedded fine Z-pin reinforced polymer composite. Journal of Materials Research and Technology.DOI
  44. Fei Xing, Min Li, Shaokai Wang, Yizhuo Gu, Wei Zhang, Yanjie Wang (2022). Temperature Dependence of Electrical Resistance in Carbon Nanotube Composite Film during Curing Process. Nanomaterials.DOI
  45. Yushun Liu, Benben Liu, Yizhuo Gu, Shaokai Wang, Min Li (2022). Gamma radiation shielding property of continuous fiber reinforced epoxy matrix composite containing functional filler using Monte Carlo simulation. Nuclear Materials and Energy.DOI
  46. Yansheng Fan, Min Li, Yizhuo Gu, Shaokai Wang, Yanjie Wang (2022). Degradation mechanism for mechanical property of carbon fiber reinforced epoxy composite under simulated seawater absorption coupled with flexural load. Journal of Materials Research and Technology.DOI
  47. Donglu Wei, Yizhuo Gu, Hanrui Zhu, Min Li, Shaokai Wang (2022). Influence of Electrical Heating Metal Mesh and Power Density on Resistance Welding of Carbon Fiber/PEEK Composite. Polymers.DOI
  48. Zhe Che, Min Li, Shuo Wang, Shuo Wang, Shaokai Wang, Shaokai Wang, Yizhuo Gu, Wei Zhang (2022). Mode II interlaminar fracture toughness enhancement of fine z‐pin reinforced carbon fiber composite with low fraction of pins. Polymer Composites.DOI
  49. Cai Jiang, Jianwei Zhang, Dazhi Jiang, Shaokai Wang, Yizhuo Gu, Min Li, Yonglyu He (2022). Interaction between carbon nanotubes with functional groups and epoxy resin and its effect on thermal properties of carbon nanotubes/epoxy composites. Journal of Composite Materials.DOI
  50. Yansheng Fan, Min Li, Yizhuo Gu, Shaokai Wang, Yanjie Wang (2022). Effects of Z-pin on moisture absorption property and damage mode under flexural load for carbon fiber composite. Science and Engineering of Composite Materials.DOI
  51. 李天舒，王绍凯，顾轶卓，张伟，李敏（2021）. 碳纳米管膜层间改性碳纤维/双马来酰亚胺复合材料的结构调控及性能. 《复合材料学报》.DOI
  52. 范燕生，杨晓琳，贺靖，孙超明，王绍凯，顾轶卓，李敏（2021）. 热压成型蜂窝板工艺质量与力学性能研究. 《纤维复合材料》.
  53. Min Li, Zhe Che, Shaokai Wang, Yubo Zhou, Hao Fu, Yizhuo Gu, Wei Zhang (2021). Tuning interlaminar fracture toughness of fine z-pin reinforced polymer composite. Materials & Design.DOI
  54. Yansheng Fan, Xiaolin Yang, Jing He, Chaoming Sun, Shaokai Wang, Yizhuo Gu, Min Li (2021). The variation mechanism of core pressure and its influence on the surface quality of honeycomb sandwich composite with thin facesheets. Journal of Materials Research and Technology.DOI
  55. Jiyong Liang, Ming Bai, Yizhuo Gu, Shaokai Wang, Min Li, Zuoguang Zhang (2021). Enhanced electromagnetic shielding property and anisotropic shielding behavior of corrugated carbon fiber felt composite and its sandwich structure. Composites Part A Applied Science and Manufacturing.DOI
  56. Fuchao Hao, Shaokai Wang, Fei Xing, Min Li, Tianshu Li, Yizhuo Gu, Wei Zhang, Jiahui Zhang (2021). Carbon-Nanotube-Film-Based Electrical Impedance Tomography for Structural Damage Detection of Carbon-Fiber-Reinforced Composites. ACS Applied Nano Materials.DOI
  57. Linlin Ma, Jingwu He, Yizhuo Gu, Zuoguang Zhang, Zechuan Yu, Ao Zhou, Lik‐ho Tam, Chao Wu (2021). Structure Design of GFRP Composite Leaf Spring: An Experimental and Finite Element Analysis. Polymers.DOI
  58. Hanqing Wei, Haifei Zhan, Yanjie Wang, Yizhuo Gu, Shaokai Wang, Zuoguang Zhang, Min Li (2021). Impacts from the stacking morphology on the tensile performance of double-walled carbon nanotube bundles. Carbon.DOI
  59. Zhe Che, Shaokai Wang, Yizhuo Gu, Wei Zhang, Cai Jiang, Min Li (2021). The Fabrication and Properties of a Bendable High-Temperature Resistance Conductive Pitch-Based Carbon/CNT Film Nanocomposite. Nanomaterials.DOI
  60. Min Li, Zenong Fang, Shaokai Wang, Yizhuo Gu, Wei Zhang (2021). Thermal conductivity enhancement and synergistic heat transfer of z-pin reinforced graphite sheet and carbon fiber hybrid composite. International Journal of Heat and Mass Transfer.DOI
  61. Zhe Che, Han Wang, Shaokai Wang, Yizhuo Gu, Min Li (2021). Delamination properties and in situ damage monitoring of z-pinned carbon fiber/epoxy composites. Science and Engineering of Composite Materials.DOI
  62. 李庆辉，孔维纳，李喆，王少敏，王绍凯，顾轶卓，李敏（2020）. 基于高Q腔法测试氮化硅纤维的介电性能. 《复合材料学报》.DOI
  63. 徐伟伟，文友谊，顾轶卓，李博，涂家祎，张佐光（2020）. 航空用国产碳纤维/双马树脂复合材料湿热特性. 《北京航空航天大学学报》.
  64. 杨中甲，乔彩霞，顾轶卓，李敏，张佐光（2020）. 表面改性玄武岩鳞片及其无溶剂重防腐复合材料涂层. 《复合材料科学与工程》.
  65. 李博，文友谊，王千足，顾轶卓，李敏，张佐光（2020）. 航空用国产碳纤维/双马树脂复合材料湿热力学性能. 《航空材料学报》.
  66. 张尉博，张琦，徐宏涛，鞠博文，郝旭峰，王晓蕾，涂家祎，顾轶卓（2020）. 高稳定碳纤维格栅夹层反射器结构设计及型面热变形优化. 《复合材料科学与工程》.
  67. 范燕生，陈超，牛芳旭，贺靖，王绍凯，李敏，顾轶卓（2020）. 蜂窝夹层结构复合材料热压成型温度场分析与工艺优化. 《第二十一届全国复合材料学术会议（NCCM-21)》.DOI
  68. 邢丹，葸雄宇，郭泽世，岳秀，郝斌，梁存光，顾轶卓，陈涛，王瑞，马鹏程（2020）. 模拟月壤制备连续纤维的可行性研究. 《中国科学:技术科学》.
  69. 车辙，王绍凯，顾轶卓，李庆辉，张伟，李敏（2020）. CNT膜/沥青基复合材料的碳化工艺与性能分析. 《第二十一届全国复合材料学术会议（NCCM-21)》.DOI
  70. Yueqing Zhao, Yizhuo Gu, Tao Zhang, Hongfu Li, Boming Zhang, Zhenchong Zhang (2020). Characterization of intra‐ply shear behaviors of unidirectional prepregs during hot diaphragm forming process. Polymer Composites.DOI
  71. Xiaoyan Chen, Yizhuo Gu, Jiyong Liang, Ming Bai, Shaokai Wang, Min Li, Zuoguang Zhang (2020). Enhanced microwave shielding effectiveness and suppressed reflection of chopped carbon fiber felt by electrostatic flocking of carbon fiber. Composites Part A Applied Science and Manufacturing.DOI
  72. 徐鹏，顾轶卓，吴臣君，高龙飞，李敏，张佐光（2019）. 纤维波纹对层间增韧碳纤维/环氧复合材料单向板力学性能的影响. 《复合材料科学与工程》.
  73. 李艳霞，顾轶卓，李敏，王绍凯，张佐光（2019）. 复合材料固化工艺评价与优化虚拟仿真实验. 《实验技术与管理》.
  74. Hanrui Zhu, Yizhuo Gu, Zhongjia Yang, Qinghui Li, Min Li, Shaokai Wang, Zuoguang Zhang (2019). Fiber distribution of long fiber reinforced polyamide and effect of fiber orientation on mechanical behavior. Polymer Composites.DOI
  75. Yanjie Wang, Min Li, Yizhuo Gu, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2019). Mechanical and electrical enhancement of super-aligned carbon nanotube film by organic and inorganic doping. Nanotechnology.DOI
  76. Min Li, Zenong Fang, Shaokai Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2019). Thermal conductivity enhancement and heat transport mechanism of carbon fiber z-pin graphite composite structures. Composites Part B Engineering.DOI
  77. Kaomin Zhang, Yizhuo Gu, Min Li, Shaokai Wang, Zuoguang Zhang (2019). Effects of curing time and de-molding temperature on the deformation of glass fiber/epoxy resin prepreg laminates fabricated by rapid hot press. Polymers and Polymer Composites.DOI
  78. Zenong Fang, Min Li, Shaokai Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2019). Through-thickness thermal conductivity enhancement of carbon fiber composite laminate by filler network. International Journal of Heat and Mass Transfer.DOI
  79. Jiyong Liang, Yizhuo Gu, Ming Bai, Shaokai Wang, Min Li, Zuoguang Zhang (2019). Electromagnetic shielding property of carbon fiber felt made of different types of short-chopped carbon fibers. Composites Part A Applied Science and Manufacturing.DOI
  80. Yujie Zhao, Kaiqi Zhao, Junwen Yin, Jieying Yang, Jie Xu, Yizhuo Gu, Limin Liu, Jun Luo, Yan Li, Lidong Sun (2019). A nanopump for low-temperature and efficient solar water evaporation. Journal of Materials Chemistry A.DOI
  81. 李博，张尉博，文友谊，马开维，顾轶卓，文琼华，李敏，张佐光（2018）. 工型加筋结构模具方案对共固化过程树脂压力及成型质量的影响. 《复合材料科学与工程》.
  82. 朱涵睿，顾轶卓，孟庆宇，张佐光（2018）. 注塑成型长玻纤/尼龙复合材料车轮纤维分布规律研究. 《复合材料科学与工程》.
  83. 王倩，顾轶卓，刘宁，张承双，李敏，王绍凯，张佐光（2018）. PBO纤维与环氧树脂界面粘结性能及其影响因素研究. 《复合材料科学与工程》.
  84. 李婷婷，李艳霞，陈超，顾轶卓，王绍凯，李健芳，李桂洋，李敏，张佐光（2018）. 603环氧树脂体系固化动力学模型的建立与验证. 《复合材料学报》.
  85. 邓火英，梁馨，顾轶卓，张文卿，蒋文革，方洲（2018）. MWCNTs对环氧树脂及多尺度MWCNTs-碳纤维/环氧树脂复合材料力学性能的影响. 《复合材料学报》.
  86. 周钰博，李艳霞，顾轶卓，王绍凯，李敏，张佐光（2018）. 复杂双曲复合材料制件固化变形的自动化模拟技术. 《2018年全国固体力学学术会议摘要集（上）》.
  87. Change Wu, Kang Yang, Yizhuo Gu, Jun Xu, Robert O. Ritchie, Juan Guan (2018). Mechanical properties and impact performance of silk-epoxy resin composites modulated by flax fibres. Composites Part A Applied Science and Manufacturing.DOI
  88. Min Li, Junpeng Wang, Shaokai Wang, Tianyi Zuo, Wenbo Sun, Yizhuo Gu, Zuoguang Zhang (2018). Effect of microstructure on the piezoresistive behavior of carbon nanotube composite film. Materials Research Express.DOI
  89. Min Li, Tianyi Zuo, Shaokai Wang, Yizhuo Gu, Limin Gao, Yanxia Li, Zuoguang Zhang (2018). Piezoresistivity of resin-impregnated carbon nanotube film at high temperatures. Nanotechnology.DOI
  90. Chenjun Wu, Yizhuo Gu, Liang Luo, Peng Xu, Shaokai Wang, Min Li, Zuoguang Zhang (2018). Influences of in-plane and out-of-plane fiber waviness on mechanical properties of carbon fiber composite laminate. Journal of Reinforced Plastics and Composites.DOI
  91. Haichao Fan, Yizhuo Gu, Shaokai Wang, Min Li, Zuoguang Zhang (2018). Characterization and analysis of torsion property of carbon fiber bundle combined with epoxy resin. Polymer Composites.DOI
  92. Weibo Zhang, Xuhao Liang, Min Li, Yizhuo Gu, Yanxia Li, Shaokai Wang, Zuoguang Zhang (2018). Experimental and numerical studies on compaction of carbon fiber composite joint with variable cross‐section using thermal expansion process. Polymer Composites.DOI
  93. Yin Wang, Shaokai Wang, Min Li, Yizhuo Gu, Zuoguang Zhang (2018). Piezoresistive response of carbon nanotube composite film under laterally compressive strain. Sensors and Actuators A Physical.DOI
  94. Yafei Sun, Shaokai Wang, Min Li, Yizhuo Gu, Zuoguang Zhang (2018). Improvement of out-of-plane thermal conductivity of composite laminate by electrostatic flocking. Materials & Design.DOI
  95. Tianshu Li, Min Li, Yizhuo Gu, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2018). Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite. Composites Science and Technology.DOI
  96. Wenbo Sun, Yizhuo Gu, Zhongjia Yang, Min Li, Shaokai Wang, Zuoguang Zhang (2018). Enhanced tribological performance of hybrid polytetrafluoroethylene/Kevlar fabric composite filled with milled pitch‐based carbon fibers. Journal of Applied Polymer Science.DOI
  97. Cong Liu, Min Li, Yizhuo Gu, Yuanming Gong, Jiyong Liang, Shaokai Wang, Zuoguang Zhang (2018). Resistance heating forming process based on carbon fiber veil for continuous glass fiber reinforced polypropylene. Journal of Reinforced Plastics and Composites.DOI
  98. 吕雪，周泓，王艳洁，顾轶卓（2017）. 基于MPCM的先进复合材料构件制造成本分析. 《北京航空航天大学学报：社会科学版》, Vol. 30, No. 3.下载原文
  99. 吕雪，顾轶卓，张佐光（2017）. 高校检测实验室质量控制关键要素与管理体系建设方法——北京航空航天大学高性能碳纤维检测评价中心实例分析. 《科技管理研究》.
  100. 王婷婷，顾轶卓，王绍凯，李敏，方泽农，张佐光（2017）. 碳纤维轴向导热性能表征及其影响因素. 《北京航空航天大学学报》.
  101. 向炳东，李敏，李艳霞，顾轶卓，张佐光，李健芳，李桂洋（2017）. 筒状复合材料制件热压罐成型温度模拟及影响因素分析. 《航空学报》.
  102. 刘千立，王晓蕾，李敏，王绍凯，顾轶卓，田杰，张佐光（2017）. 取向碳纳米管膜/氰基树脂复合材料的制备与性能强化机制. 《复合材料学报》.
  103. 李潭，顾轶卓，王绍凯，李敏，张佐光（2017）. 碳纤维丝束起毛量测试方法. 《材料工程》.
  104. 周钰博，李艳霞，李敏，顾轶卓，张佐光，宋永忠，余立琼，程家（2017）. 细编穿刺织物的数学建模理论与实例. 《材料工程》.
  105. 陈菁，顾轶卓，杨中甲，李敏，王绍凯，张佐光（2017）. 高温处理对几种玄武岩纤维成分和拉伸性能的影响. 《材料工程》.
  106. Zenong Fang, Min Li, Shaokai Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2017). THE EFFECT OF PLY SCHEME ON THERMAL CONDUCTION OF FIBER REINFORCED COMPOSITE. 《第二十一届国际复合材料大会摘要集—专题一》.
  107. Tianshu Li, Min Li, Yizhuo Gu, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2017). JOULE HEAT TREATMENT ON CARBON NANOTUBE FILMS AT DIFFERENT ELEVATED TEMPERATURES. 《第二十一届国际复合材料大会论文集 专题一》.
  108. Yanjie Wang, Min Li, Mengsi Zhang, Yizhuo Gu, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2017). THE EFFECTS OF IRRADIATION MODIFICATION ON THE FLOATING CARBON NANOTUBE FILM. 《第二十一届国际复合材料大会论文集 专题一》.
  109. Jiyong Liang, Cong Liu, Yizhuo Gu, Min Li, Shaokai Wang, Yanxia Li, Zuoguang Zhang (2017). Electrical-Heating Molding Process Based on Carbon Fiber Felt for Fabricating Glass Fiber Reinforced Thermoplastic Composite. 《第二十一届国际复合材料大会摘要集—专题六》.
  110. Weibo Zhang, Min Li, Yizhuo Gu, Shaokai Wang, Zuoguang Zhang (2017). RESIN PRESSURE AND RESIN FLOW INSIDE A COMPOSITE JOINT DURING THERMAL EXPANSION PROCESS. 《第二十一届国际复合材料大会摘要集—专题六》.
  111. Yubo Zhou, Min Li, Yanxia Li, Yizhuo Gu, Zuoguang Zhang (2017). THE DETECTION METHOD OF PARTICLE DISTRIBUTION IN TERNARY COMPOSITES CONSISTING OF PARTICLES, RESIN MATRIX AND 3-D WOVEN REINFORCEMENT. 《第二十一届国际复合材料大会论文集 专题六》.
  112. Weixin Wang, Yizhuo Gu, Min Li, Shaokai Wang, Zuoguang Zhang (2017). Characterization of tensile property of high-performance fiber bundles combined with epoxy resin using advanced video extensometer. Journal of Composite Materials.DOI
  113. Jiyong Liang, Yizhuo Gu, Zhenchong Zhang, Shaokai Wang, Min Li, Zuoguang Zhang (2017). Densification of chlorine-doped continuous CNT sheet/polyvinylidene fluoride sandwich film and improvement of the mechanical and dielectric properties. Nanotechnology.DOI
  114. Zenong Fang, Min Li, Shaokai Wang, Yanxia Li, Xiaolei Wang, Yizhuo Gu, Qianli Liu, Jie Tian, Zuoguang Zhang (2017). Geometrical Effect on Thermal Conductivity of Unidirectional Fiber-Reinforced Polymer Composite along Different In-plane Orientations. Applied Composite Materials.DOI
  115. Shaokai Wang, Qianli Liu, Min Li, Tianshu Li, Yizhuo Gu, Qingwen Li, Zuoguang Zhang (2017). Property improvements of CNT films induced by wet-stretching and tension-heating post treatments. Composites Part A Applied Science and Manufacturing.DOI
  116. Yingwei Hou, Min Li, Yizhuo Gu, Zhongjia Yang, Ran Li, Zuoguang Zhang (2017). Gamma Ray Shielding Property of Tungsten Powder Modified Continuous Basalt Fiber Reinforced Epoxy Matrix Composites. Polymer Composites.DOI
  117. Yan‐Wen Zhao, Yizhuo Gu, Pei Huang (2017). Evaluation of crosslinking and surface coating on the moisture resistance of freeze‐dried clay aerogel. Polymer Composites.DOI
  118. Chao Chen, Yanxia Li, Yizhuo Gu, Min Li, Zuoguang Zhang (2017). Effect of MWCNTs added by electrostatic flocking method on adhesion of carbon fiber prepreg/Nomex honeycomb sandwich composites. Materials & Design.DOI
  119. Ran Li, Yizhuo Gu, Zhongjia Yang, Min Li, Yingwei Hou, Zuoguang Zhang (2017). Gamma ray shielding property, shielding mechanism and predicting model of continuous basalt fiber reinforced polymer matrix composite containing functional filler. Materials & Design.DOI
  120. Ran Li, Yizhuo Gu, Yidong Wang, Zhongjia Yang, Min Li, Zuoguang Zhang (2017). Effect of particle size on gamma radiation shielding property of gadolinium oxide dispersed epoxy resin matrix composite. Materials Research Express.DOI
  121. Ran Li, Yizhuo Gu, Gaolong Zhang, Zhongjia Yang, Min Li, Zuoguang Zhang (2017). Radiation shielding property of structural polymer composite: Continuous basalt fiber reinforced epoxy matrix composite containing erbium oxide. Composites Science and Technology.DOI
  122. Chao Chen, Yanxia Li, Yizhuo Gu, Min Li, Zuoguang Zhang (2017). An improved simplified approach for curing kinetics of epoxy resins by nonisothermal differential scanning calorimetry. High Performance Polymers.DOI
  123. Qingyu Meng, Yizhuo Gu, Liang Luo, Shaokai Wang, Min Li, Zuoguang Zhang (2017). Annealing effect on crystalline structure and mechanical properties in long glass fiber reinforced polyamide 66. Journal of Applied Polymer Science.DOI
  124. Yu Zhang, Min Li, Yizhuo Gu, Shaokai Wang, Zuoguang Zhang (2017). Preparation of high-content hexagonal boron nitride composite film and characterization of atomic oxygen erosion resistance. Applied Surface Science.DOI
  125. Chao Chen, Yanxia Li, Yizhuo Gu, Min Li, Zuoguang Zhang (2017). Improvement in skin–core adhesion of multiwalled carbon nanotubes modified carbon fiber prepreg/Nomex honeycomb sandwich composites. Journal of Reinforced Plastics and Composites.DOI
  126. 方泽农，李敏，王天宇，王绍凯，顾轶卓，张佐光（2016）. 中间相沥青基碳纤维/T700混杂复合材料的VARI工艺成型质量及导热性能分析. 《第十九届全国复合材料学术会议摘要集》.
  127. 梁吉勇，顾轶卓，杨中甲，李敏，王绍凯，张佐光（2016）. 磷酸阳极化处理对超混杂复合材料力学性能影响. 《第十九届全国复合材料学术会议》.
  128. 宋永忠，余立琼，程家，李艳霞，顾轶卓，李敏，张佐光（2016）. 基于FEPG有限元分析系统的树脂充模过程模拟. 《复合材料学报》.
  129. 徐永新，顾轶卓，马全胜，李敏，王绍凯，张佐光（2016）. 几种国产高模碳纤维特性实验分析. 《复合材料学报》.
  130. 王珍珍，李敏，刘千立，王绍凯，顾轶卓，张佐光（2016）. 浮动催化CVD法CNTs膜及CNTs膜/环氧复合材料拉伸特性. 《复合材料学报》.
  131. 文琼华，马开维，李博，文友谊，陈超，李艳霞，顾轶卓，李敏（2016）. 加压时机对碳纤维增强改性双马树脂复合材料力学性能的影响. 《复合材料科学与工程》.
  132. 冯娟，顾轶卓，李敏，王绍凯，张佐光（2016）. 弱电流对碳纤维/环氧树脂界面黏结性能的影响. 《材料工程》.
  133. 李然，顾轶卓，杨中甲，王绍凯，李敏，张佐光（2016）. 氧化铒掺杂玄武岩纤维增强复合材料的辐射屏蔽及力学性能研究. 《第十九届全国复合材料学术会议摘要集》.
  134. 赵艳文，李云飞，陈静，叶宏军，蒋蔚，顾轶卓（2016）. 纳米纤维素增强仿贝壳结构黏土复合材料性能研究. 《航空制造技术》.
  135. 王艳洁，李敏，李清文，顾轶卓，王绍凯，张佐光（2016）. 碳纳米管/邻苯二甲腈树脂薄膜的复合强化工艺研究. 《第十九届全国复合材料学术会议摘要集》.
  136. 宋彦辉，李敏，王绍凯，顾轶卓，李清文，张佐光（2016）. 新型CNT/C复合材料的制备与表征. 《第十九届全国复合材料学术会议摘要集》.
  137. 陈超，李艳霞，顾轶卓，李敏，张佐光（2016）. 碳纳米管对蜂窝夹层结构复合材料粘接性能的影响. 《第十九届全国复合材料学术会议摘要集》.
  138. Mengsi Zhang, Min Li, Shaokai Wang, Yanjie Wang, Yongyi Zhang, Yizhuo Gu, Qingwen Li, Zuoguang Zhang (2016). The loading-rate dependent tensile behavior of CNT film and its bismaleimide composite film. Materials & Design.DOI
  139. Chen Chen, Yizhuo Gu, Shaokai Wang, Zhenchong Zhang, Min Li, Zuoguang Zhang (2016). Fabrication and characterization of structural/dielectric three-phase composite: Continuous basalt fiber reinforced epoxy resin modified with graphene nanoplates. Composites Part A Applied Science and Manufacturing.DOI
  140. Pan Jiao, Min Li, Shaokai Wang, Yizhuo Gu, Qingwen Li, Zuoguang Zhang (2016). Hybrid effect of carbon nanotube film and ultrathin carbon fiber prepreg composites. Journal of Reinforced Plastics and Composites.DOI
  141. Quansheng Ma, Zhongjia Yang, Yizhuo Gu, Min Li, Shaokai Wang, Zuoguang Zhang (2016). Permeabilities along fiber direction of ramie bundles and through-thickness of ramie fabric stack for liquid composite molding. Journal of Reinforced Plastics and Composites.DOI
  142. Xingxing Wang, Min Li, Qing Lin Wu, Yizhuo Gu, Yanxia Li, Shaokai Wang, Zuoguang Zhang (2016). Influence of surface state on moisture sensitivity of carbon fiber and its composite interfacial properties. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  143. Chao Chen, Yanxia Li, Yizhuo Gu, Min Li, Zuoguang Zhang (2016). Prediction of the resin fillet size in honeycomb sandwich composites with self-adhesive prepreg skin. Journal of Reinforced Plastics and Composites.DOI
  144. Kang Yang, Robert O. Ritchie, Yizhuo Gu, Sujun Wu, Juan Guan (2016). High volume-fraction silk fabric reinforcements can improve the key mechanical properties of epoxy resin composites. Materials & Design.DOI
  145. Yanjie Wang, Min Li, Weibang Lu, Yizhuo Gu, Shaokai Wang, Rui Sun, Xuetong Zhang, Qingwen Li, Zuoguang Zhang (2016). Bio-inspired design and fabrication of an ultralight and strong nano-carbon gradient composite. Materials & Design.DOI
  146. Zhenchong Zhang, Yizhuo Gu, Shaokai Wang, Qingwen Li, Min Li, Zuoguang Zhang (2016). Enhanced dielectric and mechanical properties in chlorine-doped continuous CNT sheet reinforced sandwich polyvinylidene fluoride film. Carbon.DOI
  147. Quansheng Ma, Yizhuo Gu, Min Li, Shaokai Wang, Zuoguang Zhang (2016). Effects of surface treating methods of high-strength carbon fibers on interfacial properties of epoxy resin matrix composite. Applied Surface Science.DOI
  148. Zhenchong Zhang, Yizhuo Gu, Jiayu Bi, Shaokai Wang, Min Li, Zuoguang Zhang (2016). Tunable BT@SiO2 core@shell filler reinforced polymer composite with high breakdown strength and release energy density. Composites Part A Applied Science and Manufacturing.DOI
  149. 周雷，顾轶卓，邱学仕，李敏，王绍凯，李艳霞，张佐光（2015）. 碳纤维复丝压缩性能测试方法. 《复合材料学报》.
  150. 范雨娇，顾轶卓，邓火英，蒋文革，李敏，张佐光（2015）. 碳纳米管加入方式对碳纤维/环氧树脂复合材料层间性能的影响. 《复合材料学报》.
  151. 杨中甲，梁吉勇，王绍凯，顾轶卓，李敏，张佐光（2015）. 轨道交通用轻量化先进复合材料性能研究. 《电力机车与城轨车辆》.
  152. 李艳霞，顾轶卓，李敏，张佐光（2015）. 先进复合材料热压罐工艺成型过程压力监测技术. 《航空制造技术》.
  153. 顾轶卓，李敏，李艳霞，王绍凯，张佐光（2015）. 飞行器结构用复合材料制造技术与工艺理论进展. 《航空学报》.
  154. 李金良，顾轶卓，李敏，王绍凯，金超，张佐光（2015）. 复合材料柔性电热膜固化方法与温度分布. 《北京航空航天大学学报》.
  155. 李艳霞，顾轶卓，李敏（2015）. 复合材料热压罐成型工艺实验教学探讨. 《实验室研究与探索》.
  156. Yizhuo Gu, Shaokai Wang, Zhongjia Yang, Qingwen Li, Min Li, Zuoguang Zhang (2015). Effects of atomic oxygen exposure on the properties of carbon nanotube film and its polymer composite film. Abstract Book of the 6th International Conference on Nanoscience & Technology, China 2015.
  157. Wenfu Cai, Min Li, Shaokai Wang, Yizhuo Gu, Qingwen Li, Zuoguang Zhang (2015). Strong, flexible and thermal-resistant CNT/polyarylacetylene nanocomposite films. RSC Advances.DOI
  158. Jiayu Bi, Yizhuo Gu, Zhenchong Zhang, Shaokai Wang, Min Li, Zuoguang Zhang (2015). Core–shell SiC/SiO2 whisker reinforced polymer composite with high dielectric permittivity and low dielectric loss. Materials & Design.DOI
  159. Ran Li, Yizhuo Gu, Zhongjia Yang, Min Li, Shaokai Wang, Zuoguang Zhang (2015). Effect of γ irradiation on the properties of basalt fiber reinforced epoxy resin matrix composite. Journal of Nuclear Materials.DOI
  160. Kaomin Zhang, Yizhuo Gu, Jinglun Zhang, Min Li, Shaokai Wang, Zuoguang Zhang (2015). Rapid curing vacuum-assisted resin infusion molding using silicone rubber sheet heater and the effect of cooling process on the properties of carbon fiber/epoxy composites. Journal of Composite Materials.DOI
  161. Zhenchong Zhang, Yizhuo Gu, Jiayu Bi, Shaokai Wang, Min Li, Zuoguang Zhang (2015). SiC@SiO2 core@shell filler reinforced polymer composites with high dielectric permittivity and low loss. Materials Letters.DOI
  162. Ya-Nan Liu, Min Li, Yizhuo Gu, Yongyi Zhang, Qingwen Li, Zuoguang Zhang (2015). Ultrastrong carbon nanotube/ bismaleimide composite film with super-aligned and tightly packing structure. Composites Science and Technology.DOI
  163. Qing Lin Wu, Min Li, Yizhuo Gu, Shaokai Wang, Zuoguang Zhang (2015). Imaging the interphase of carbon fiber composites using transmission electron microscopy: Preparations by focused ion beam, ion beam etching, and ultramicrotomy. Chinese Journal of Aeronautics.DOI
  164. Chuanqi Xu, Yizhuo Gu, Zhongjia Yang, Min Li, Yanxia Li, Zuoguang Zhang (2015). Mechanical properties of surface-treated ramie fiber fabric/epoxy resin composite fabricated by vacuum-assisted resin infusion molding with hot compaction. Journal of Composite Materials.DOI
  165. Min Li, Zhenzhen Wang, Qianli Liu, Shaokai Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2015). Carbon nanotube film/epoxy composites with high strength and toughness. Polymer Composites.DOI
  166. Wei Zhang, Huagang Xiong, Shaokai Wang, Min Li, Yizhuo Gu (2015). Electromagnetic characteristics of carbon nanotube film materials. Chinese Journal of Aeronautics.DOI
  167. Yanjie Wang, Min Li, Yizhuo Gu, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2015). Structural modification for carbon nanotube film and the composite film by processing optimization. Applied Surface Science.DOI
  168. Wei Zhang, Huagang Xiong, Shaokai Wang, Min Li, Yizhuo Gu (2015). Negative permittivity behavior of aligned carbon nanotube films. Applied Physics Letters.DOI
  169. Aijun Gao, Yizhuo Gu, Qing Lin Wu, Chao Yuan, Min Li, Zuoguang Zhang (2015). Influence of processing temperature on interfacial behavior of HKT800 carbon fiber with BMI and epoxy matrices. Chinese Journal of Aeronautics.DOI
  170. Zhenchong Zhang, Yizhuo Gu, Shaokai Wang, Min Li, Jiayu Bi, Zuoguang Zhang (2015). Enhancement of dielectric and electrical properties in BT/SiC/PVDF three-phase composite through microstructure tailoring. Composites Part A Applied Science and Manufacturing.DOI
  171. Libing Jiao, Yizhuo Gu, Shaokai Wang, Zhongjia Yang, Han Wang, Qingwen Li, Min Li, Zuoguang Zhang (2015). Atomic oxygen exposure behaviors of CVD-grown carbon nanotube film and its polymer composite film. Composites Part A Applied Science and Manufacturing.DOI
  172. Qing Lin Wu, Min Li, Yizhuo Gu, Shaokai Wang, Xingxing Wang, Zuoguang Zhang (2015). Reaction of carbon fiber sizing and its influence on the interphase region of composites. Journal of Applied Polymer Science.DOI
  173. Qianli Liu, Min Li, Yizhuo Gu, Shaokai Wang, Yongyi Zhang, Qingwen Li, Limin Gao, Zuoguang Zhang (2015). Interlocked CNT networks with high damping and storage modulus. Carbon.DOI
  174. Yizhuo Gu, Xing Qin, Min Li, Kaomin Zhang, Zuoguang Zhang (2015). Temperature Distribution and Curing Behaviour of Carbon Fibre/ Epoxy Composite during Vacuum Assisted Resin Infusion Moulding Using Rapid Heating Methods. Polymers and Polymer Composites.DOI
  175. 李敏，王绍凯，顾轶卓，张佐光（2014）. 碳纳米管有序增强体及其复合材料研究进展. 《航空学报》.
  176. 陈超，张娅婷，顾轶卓，张华婷，仵剑，李艳霞，李敏，张佐光（2014）. 碳纤维/环氧复合材料孔隙缺陷的工艺影响因素研究. 《复合材料科学与工程》.
  177. 王绍凯，马绪强，李敏，顾轶卓，张佐光（2014）. 飞行器结构用复合材料四大核心技术及发展. 《复合材料科学与工程》.
  178. 陈洁，顾轶卓，李敏，孙晶，李艳霞，张佐光（2014）. 碳纤维/环氧预浸料摩擦滑移特性测试及其变化规律. 《复合材料学报》.
  179. 朱明明，李敏，武清，顾轶卓，张佐光（2014）. 温度条件对碳纤维上浆剂与双马树脂反应及其复合材料界面粘结的影响. 《航空学报》.
  180. 李艳霞，顾轶卓，李敏，张佐光（2014）. 复合材料热压罐成形工艺模拟特色实验. 《科技创新导报》.
  181. 方鲲，李玫，顾轶卓（2014）. 铝纤维填充工程塑料的制备与屏蔽性能研究. 《安全与电磁兼容》.
  182. Zhongjia Yang, Gu Yizhuo, Min Li, Yanxia Li, Jie Lu, Zuoguang Zhang (2014). Design and Analysis of Small-Scale Lift-Type Vertical-Axis Wind Turbine Using Composite Blade. Polymers and Polymer Composites.DOI
  183. Yanjie Wang, Min Li, Yizhuo Gu, Xiaohua Zhang, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2014). Tuning carbon nanotube assembly for flexible, strong and conductive films. Nanoscale.DOI
  184. Xuqiang Ma, Yanxia Li, Yizhuo Gu, Min Li, Zuoguang Zhang (2014). Numerical simulation of prepreg resin impregnation effect in vacuum-assisted resin infusion/prepreg co-curing process. Journal of Reinforced Plastics and Composites.DOI
  185. Xuqiang Ma, Yizhuo Gu, Yanxia Li, Min Li, Zuoguang Zhang (2014). Interlaminar properties of carbon fiber composite laminates with resin transfer molding/prepreg co-curing process. Journal of Reinforced Plastics and Composites.DOI
  186. Kaomin Zhang, Yizhuo Gu, Shaokai Wang, Li Jun Mi, Zuoguang Zhang (2014). Effects of Preheating Temperature of the Mould on the Properties of Rapid-Curing Carbon Fibre Composites Fabricated by Vacuum-Assisted Resin Infusion Moulding. Polymers and Polymer Composites.DOI
  187. Xuqiang Ma, Yizhuo Gu, Min Li, Yanxia Li, Zuoguang Zhang (2014). Investigation of carbon fiber composite stiffened skin with vacuum assisted resin infusion/prepreg co-curing process. Science China Technological Sciences.DOI
  188. Qing Lin Wu, Min Li, Yizhuo Gu, Shaokai Wang, Lirui Yao, Zuoguang Zhang (2014). Effect of sizing on interfacial adhesion of commercial high strength carbon fiber‐reinforced resin composites. Polymer Composites.DOI
  189. Xuqiang Ma, Zhongjia Yang, Yizhuo Gu, Yanxia Li, Min Li, Dongmei Zhang, Lijie Jia, Zuoguang Zhang (2014). Manufacture and characterization of carbon fiber composite stiffened skin by resin film infusion/prepreg co-curing process. Journal of Reinforced Plastics and Composites.DOI
  190. Xiaofang Liu, Caizhen Zhu, Jing Guo, Qianli Liu, Haixia Dong, Yizhuo Gu, Ruigang Liu, Ning Zhao, Zuoguang Zhang, Jian Zhi Xu (2014). Nanoscale dynamic mechanical imaging of the skin–core difference: From PAN precursors to carbon fibers. Materials Letters.DOI
  191. Mingming Zhu, Min Li, Qing Lin Wu, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2014). Effect of processing temperature on the micro- and macro-interfacial properties of carbon fiber/epoxy composites. Composite Interfaces.DOI
  192. Qianli Liu, Min Li, Yizhuo Gu, Yongyi Zhang, Shaokai Wang, Qingwen Li, Zuoguang Zhang (2014). Highly aligned dense carbon nanotube sheets induced by multiple stretching and pressing. Nanoscale.DOI
  193. 袁莉莉，顾轶卓，李敏，杨中甲，孙志杰，张佐光（2013）. 羧基碳纳米管增强酚醛泡沫的压缩性能及热性能. 《复合材料学报》.
  194. 张靠民，李敏，顾轶卓，张佐光（2013）. 先进复合材料从飞机转向汽车应用的关键技术. 《中国材料进展》.
  195. 姚双，李敏，顾轶卓，马晓星（2013）. 碳纤维复合材料C形结构热隔膜成型工艺. 《北京航空航天大学学报》.
  196. 赵艳文，叶宏军，翟全胜，顾轶卓，李敏，张佐光（2013）. 碳纳米管/玻纤/环氧层板超声真空灌注工艺及性能研究. 《航空材料学报》.
  197. 王伟霞，顾轶卓，李敏，刘洪新，张佐光（2013）. 单丝断裂双树脂法研究碳纤维/环氧树脂界面粘结性能. 《复合材料学报》.
  198. 边旭霞，顾轶卓，孙晶，李敏，张冬梅，张佐光（2013）. 热隔膜工艺温度与成型速率对C形复合材料成型质量的影响. 《复合材料科学与工程》.
  199. 何志平，李敏，顾轶卓，陈名海，张佐光，李清文（2013）. 石墨烯/热塑性聚氨酯薄膜的制备及性能. 《复合材料科学与工程》.
  200. 辛朝波，徐吉峰，顾轶卓，李敏，张佐光（2013）. 热压罐工艺树脂压力测试系统适用性实验研究. 《复合材料学报》.
  201. 刘小龙，顾轶卓，李敏，苏佳智，孙晶，孙志杰，张佐光（2013）. 采用薄膜传感器的树脂基复合材料热压罐工艺密实压力测试方法. 《复合材料学报》.
  202. 高聪，李敏，王娟，李艳霞，顾轶卓，孙志杰，张佐光（2013）. 化学处理和吸湿水对剑麻纤维及其与树脂界面性能的影响. 《复合材料学报》.
  203. 张靠民，顾轶卓，李敏，王超然，张佐光（2013）. 快速固化环氧树脂及其碳纤维/环氧复合材料性能. 《复合材料学报》.
  204. 刘冰，张靠民，李敏，顾轶卓，张佐光（2013）. 车用高分子复合材料发展趋势及建议. 《中国塑料》.
  205. 王炯，李敏，顾轶卓，王绍凯，张佐光（2013）. 炭纤维复合材料共固化液体成型工艺及层间性能研究. 《材料工程》.
  206. Zhiping He, Xiaohua Zhang, Minghai Chen, Min Li, Yizhuo Gu, Zuoguang Zhang, Qingwen Li (2013). Effect of the filler structure of carbon nanomaterials on the electrical, thermal, and rheological properties of epoxy composites. Journal of Applied Polymer Science.DOI
  207. Jing Sun, Min Li, Yizhuo Gu, Dongmei Zhang, Yanxia Li, Zuoguang Zhang (2013). Interply friction of carbon fiber/epoxy prepreg stacks under different processing conditions. Journal of Composite Materials.DOI
  208. Xiangnan Bian, Yizhuo Gu, Jing Sun, Mengzhao Li, W. P. Liu, Z. G. Zhang (2013). Effects of Processing Parameters on the Forming Quality of C-Shaped Thermosetting Composite Laminates in Hot Diaphragm Forming Process. Applied Composite Materials.DOI
  209. Yizhuo Gu, Xuelin Tan, Zhongjia Yang, Min Li, Zuoguang Zhang (2013). Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding. Materials & Design (1980-2015).DOI
  210. Kun Wang, Min Li, Ya-Nan Liu, Yizhuo Gu, Qingwen Li, Zuoguang Zhang (2013). Effect of acidification conditions on the properties of carbon nanotube fibers. Applied Surface Science.DOI
  211. Yizhuo Gu, Hongxin Liu, Min Li, Yanxia Li, Zuoguang Zhang (2013). Macro- and micro-interfacial properties of carbon fiber reinforced epoxy resin composite under hygrothermal treatments. Journal of Reinforced Plastics and Composites.DOI
  212. Min Li, Yizhuo Gu, Yanxia Li, Hong Shi Liu, Zuoguang Zhang (2013). Competition of diffusion and crosslink on the interphase region in carbon fiber/epoxy analyzed by multiscale simulations. Journal of Applied Polymer Science.DOI
  213. Min Li, Hongxin Liu, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2013). Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments. Applied Surface Science.DOI
  214. Zishun Zhou, Mengzhao Li, Yizhuo Gu, Xiaofeng Ma, Yunxiao Li, L.J. Jia, Z.G. Zhang (2013). Resin flow monitoring inside composite laminate during resin film infusion process. Polymer Composites.DOI
  215. Qing Lin Wu, Min Li, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2013). Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite. Composites Part A Applied Science and Manufacturing.DOI
  216. Kaomin Zhang, Yizhuo Gu, Min Li, Zuoguang Zhang (2013). Effect of rapid curing process on the properties of carbon fiber/epoxy composite fabricated using vacuum assisted resin infusion molding. Materials & Design (1980-2015).DOI
  217. Qianli Liu, Min Li, Zhenzhen Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2013). Improvement on the tensile performance of buckypaper using a novel dispersant and functionalized carbon nanotubes. Composites Part A Applied Science and Manufacturing.DOI
  218. Ya-Nan Liu, Min Li, Yizhuo Gu, Kun Wang, Dongmei Hu, Qingwen Li, Zuoguang Zhang (2013). A modified spray-winding approach to enhance the tensile performance of array-based carbon nanotube composite films. Carbon.DOI
  219. Zhong-Jia Yang, Yizhuo Gu, Min Li, Yanxia Li, Jie Lu, Zuoguang Zhang (2013). Design and verification of a small-scale lift-type vertical axis wind turbine composite blade.DOI
  220. Min Li, Yizhuo Gu, Hong Shi Liu, Yanxia Li, Shaokai Wang, Qing Lin Wu, Zuoguang Zhang (2013). Investigation the interphase formation process of carbon fiber/epoxy composites using a multiscale simulation method. Composites Science and Technology.DOI
  221. Ya-Nan Liu, Min Li, Yizhuo Gu, Zuoguang Zhang (2013). Characterization of torsion behavior and fracture morphology of single carbon fiber. Journal of Composite Materials.DOI
  222. Weiwei Xu, Yizhuo Gu, Min Li, Xuqiang Ma, Dongmei Zhang, Zuoguang Zhang (2013). Co-curing process combining resin film infusion with prepreg and co-cured interlaminar properties of carbon fiber composites. Journal of Composite Materials.DOI
  223. Chengjian Wang, Yizhuo Gu, Kexin Zhang, Mengzhao Li, Z.G. Zhang (2013). Rapid Curing Epoxy Resin and Its Application in Carbon Fibre Composite Fabricated Using Vartm Moulding. Polymers and Polymer Composites.DOI
  224. Zhongjia Yang, Lili Yuan, Yizhuo Gu, Min Li, Sun Zhijie, Zuoguang Zhang (2013). Improvement in mechanical and thermal properties of phenolic foam reinforced with multiwalled carbon nanotubes. Journal of Applied Polymer Science.DOI
  225. 刘亚男，顾轶卓，李敏，张佐光（2012）. 不同种类碳纳米管浸润剂对碳纤维/环氧树脂界面性能的影响. 《第17届全国复合材料学术会议（纳米复合材料与界面分论坛）论文集》.
  226. 刘洪新，顾轶卓，李敏，李艳霞，张佐光（2012）. 上浆剂对碳纤维/环氧树脂复合材料界面耐温性的影响研究. 《第17届全国复合材料学术会议（纳米复合材料与界面分论坛）论文集》.
  227. 武清，李敏，姚丽瑞，袁超，顾轶卓，张佐光（2012）. 工艺条件下上浆剂对碳纤维与树脂浸润、粘结特性的影响. 《第17届全国复合材料学术会议（纳米复合材料与界面分论坛）论文集》.
  228. 刘妍，李敏，刘千立，顾轶卓，李艳霞，张佐光（2012）. 多壁巴基纸/环氧复合材料拉伸性能的影响因素. 《复合材料学报》.
  229. 邵蒙，顾轶卓，程勇，孙晶，李敏，张佐光（2012）. 硅橡胶热膨胀模具设计与纵横加筋壁板成型质量分析. 《航空学报》.
  230. 张靠民，李敏，顾轶卓，张佐光（2012）. 汽车用先进复合材料的低成本技术. 《复合材料科学与工程》.
  231. 李珊，赵静娜，贾晶晶，顾轶卓，李敏，张骁骅，李清文，张佐光（2012）. 阵列法制备连续碳纳米管纤维及其性能研究. 《复合材料科学与工程》.
  232. 管培强，李艳霞，李敏，王冀，顾轶卓，孙志杰，张佐光（2012）. 碳纤维/环氧界面相准静态纳米压痕表征方法分析. 《复合材料科学与工程》.
  233. 曹晓明，顾轶卓，李超，李敏，张佐光（2012）. 碳纤维复合材料方管硅橡胶热膨胀成型工艺研究. 《复合材料科学与工程》.
  234. 朱宇，顾轶卓，杨中甲，黎作武，张佐光，孙志杰（2012）. 小型垂直轴风机叶片制备与设计实验验证. 《复合材料科学与工程》.
  235. 高相南，孙志杰，顾轶卓，张佐光（2012）. 碳纤维对环氧树脂固化反应过程的影响. 《复合材料科学与工程》.
  236. 罗刚堂，李敏，顾轶卓，张冬梅，马绪强，张佐光（2012）. 共胶接T型加筋壁板模具设计及成型工艺研究. 《复合材料科学与工程》.
  237. 李艳菲，李敏，顾轶卓，张佐光（2012）. 风电叶片用真空灌注型环氧树脂及其复合材料性能研究. 《复合材料科学与工程》.
  238. 吕晓敏，孙志杰，李敏，顾轶卓，张佐光（2012）. 多壁碳纳米管/玻璃纤维/环氧树脂界面粘结特性研究. 《复合材料科学与工程》.
  239. 马绪强，顾轶卓，李敏，李艳霞，张佐光（2012）. 共固化RTM工艺碳纤维复合材料层板力学性能研究. 《第17届全国复合材料学术会议（复合材料制造技术与设备分论坛）论文集》.
  240. 刘千立，李敏，刘妍，顾轶卓，张佐光（2012）. 酸化碳纳米管纸及其环氧复合材料拉伸性能研究. 《第17届全国复合材料学术会议（纳米复合材料与界面分论坛）论文集》.
  241. 罗辑，辛朝波，顾轶卓，李敏，李艳霞，张佐光（2012）. 热膨胀工艺硅橡胶芯模对复合材料圆管成型的影响. 《复合材料学报》.
  242. 王娟，李敏，王绍凯，顾轶卓，李艳霞，张佐光（2012）. 剑麻纤维表面特性及其浸润行为. 《复合材料学报》.
  243. 樊序敏，顾轶卓，刘亚男，李敏，张佐光（2012）. 碳纳米管浸润剂对碳纤维/环氧树脂界面性能的影响. 《复合材料学报》.
  244. 李春霞，孙志杰，王绍凯，顾轶卓，李敏，张佐光（2012）. 三维连体织物格栅夹芯材料力学特性实验研究. 《复合材料学报》.
  245. 朱莉莉，顾轶卓，孙志杰，李敏，张佐光（2012）. 分散方法对低含量碳纳米管-玻纤/环氧层板性能的影响. 《复合材料学报》.
  246. 杨中甲，顾轶卓，李敏，黎作武，张佐光（2012）. 小型垂直轴风电系统与其复合材料叶轮研制. 《第十九届玻璃钢/复合材料学术交流会》.
  247. 孙晶，顾轶卓，李敏，李艳霞，张佐光（2012）. 预浸料摩擦滑移特性研究与影响因素分析. 《第17届全国复合材料学术会议（复合材料及其原材料分论坛）论文集》.
  248. 张丽娇，顾轶卓，李敏，刘洪新，张佐光（2012）. 炭纤维特性与炭纤维/环氧树脂界面断裂能关联分析. 《材料工程》.
  249. 张靠民，顾轶卓，李敏，王超然，张佐光（2012）. 快速固化环氧树脂体系研究. 《第17届全国复合材料学术会议（复合材料及其原材料分论坛）论文集》.
  250. 李敏，顾轶卓，李艳霞，张佐光（2012）. 聚合物基复合材料专业课程考核方式改革探析. 《陕西教育(高教)》.
  251. F.L. Shan, Yizhuo Gu, M. Li, Y.N. Liu, Z.G. Zhang (2012). Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber‐reinforced epoxy composites using a developed spraying processing. Polymer Composites.DOI
  252. Jing Kun Guo, Min Li, Qianli Liu, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2012). Influence of oxidation and distribution of carbon nanotube on mechanical properties of buckypaper/epoxy composites. Journal of Reinforced Plastics and Composites.DOI
  253. Ya-Nan Liu, Min Li, Yizhuo Gu, Xiaohua Zhang, Jingna Zhao, Qingwen Li, Zuoguang Zhang (2012). The interfacial strength and fracture characteristics of ethanol and polymer modified carbon nanotube fibers in their epoxy composites. Carbon.DOI
  254. Lirui Yao, Min Li, Qing Lin Wu, Zhishuang Dai, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2012). Comparison of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy. Applied Surface Science.DOI
  255. Min Li, Yizhuo Gu, Yanan Liu, Yanxia Li, Zuoguang Zhang (2012). Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers. Carbon.DOI
  256. Jing Sun, Yizhuo Gu, Min Li, Xiaoxing Ma, Zuoguang Zhang (2012). Effect of forming temperature on the quality of hot diaphragm formed C-shaped thermosetting composite laminates. Journal of Reinforced Plastics and Composites.DOI
  257. Haichao An, Yunxiao Li, Mengzhao Li, Yizhuo Gu, Y.N. Liu, Z.G. Zhang (2012). Interfacial adhesion and micro-failure phenomena in multi-fiber micro-composites using fragmentation test. Composite Interfaces.DOI
  258. Yanxia Li, Min Li, Yizhuo Gu, Zuoguang Zhang, Peiqiang Guan (2012). Investigation of the nanoscale mechanical properties of carbon fiber/epoxy resin interphase. I. analysis of fiber‐stiffening effect during the nanoindentation process based on numerical simulation. Polymer Composites.DOI
  259. Hongxin Liu, Yizhuo Gu, Min Li, Zuoguang Zhang (2012). Characterization of interfacial toughness in carbon fiber/epoxy resin composite subjected to water aging using single‐fiber fragmentation method in an energy‐based model. Polymer Composites.DOI
  260. Min Li, Shaokai Wang, Yizhuo Gu, Yanxia Li, Kevin D. Potter, Zuoguang Zhang (2012). Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process. Composites Science and Technology.DOI
  261. Yizhuo Gu, Chaobo Xin, Min Li, Yong Chun Cheng, Zuoguang Zhang (2012). Resin pressure and resin flow inside tapered laminates during zero-bleeding and bleeding processes. Journal of Reinforced Plastics and Composites.DOI
  262. Gu Yizhuo (2012). STUDY ON INTERPHASE BONDING CHARACTERISTICS OF MULTI-WALLED CARBON NANOTUBES/GLASS FIBER/EPOXY RESIN. Fiber Reinforced Plastics/Composites.
  263. 赵艳文，顾轶卓，李敏，张佐光（2011）. 碳纳米管-玻璃纤维/环氧层板双真空灌注工艺及性能. 《复合材料学报》.
  264. 卢鑫，孙志杰，李超，顾轶卓，李敏，辛朝波，张佐光（2011）. 硅橡胶热膨胀工艺预浸料铺层内树脂压力变化规律. 《复合材料学报》.
  265. 肖杰，顾轶卓，李敏，张佐光（2011）. 多壁碳纳米管改性环氧树脂胶黏剂实验研究. 《复合材料学报》.
  266. 蔡群，李敏，罗辑，顾轶卓，刘洪新，张佐光（2011）. 单丝断裂能量法研究温度对碳纤维/环氧界面性能的影响. 《复合材料学报》.
  267. 宋元明，李敏，王绍凯，顾轶卓，张佐光（2011）. 三维夹芯层连织物透波复合材料性能研究. 《复合材料学报》.
  268. 王科，顾轶卓，李敏，张佐光（2011）. 零吸胶工艺复合材料层板成型质量与预浸料特性关联分析. 《复合材料科学与工程》.
  269. 曹芳维，李敏，王绍凯，顾轶卓，张佐光（2011）. 碳纤维与环氧树脂润湿和黏附作用. 《复合材料学报》.
  270. Zhishuang Dai, Baoyan Zhang, Fenghui Shi, Min Li, Zuoguang Zhang, Yizhuo Gu (2011). Chemical interaction between carbon fibers and surface sizing. Journal of Applied Polymer Science.DOI
  271. Jing Sun, Yizhuo Gu, Yanxia Li, Min Li, Zuoguang Zhang (2011). Role of Tool-Part Interaction in Consolidation of L-Shaped Laminates during Autoclave Process. Applied Composite Materials.DOI
  272. Chaobo Xin, Min Li, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2011). Measurement and analysis on in-plane and through-thickness air permeation of fiber/resin prepreg. Journal of Reinforced Plastics and Composites.DOI
  273. Chaobo Xin, Min Li, Yizhuo Gu, Ji Rong Luo, Zuoguang Zhang (2011). Study on the resin flow and fiber compaction of tapered composite laminates during autoclave processing. Journal of Reinforced Plastics and Composites.DOI
  274. Chaobo Xin, Yizhuo Gu, Mengzhao Li, Ji Rong Luo, Yunxiao Li, Z.G. Zhang (2011). Experimental and numerical study on the effect of rubber mold configuration on the compaction of composite angle laminates during autoclave processing. Composites Part A Applied Science and Manufacturing.DOI
  275. Jing Sun, Yanxia Li, Min Li, Yizhuo Gu, Zuoguang Zhang (2011). Numerical Study on Effects of Interaction between Rubber Mould and Lay-up on Consolidation of L-shaped Laminates in Autoclave Process. Polymers and Polymer Composites.DOI
  276. Zhishuang Dai, Baoyan Zhang, Fenghui Shi, Min Li, Zuoguang Zhang, Yizhuo Gu (2011). Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion. Applied Surface Science.DOI
  277. 刘洪新，顾轶卓，李敏，冯青，张佐光（2010）. 碳纤维/环氧树脂界面湿热性能单丝断裂法测试研究. 《第十六届全国复合材料学术会议》.
  278. 刘千立，顾轶卓，李敏，刘宁，张佐光（2010）. 基于动态模量成像的碳纤维复合材料界面结构表征. 《复合材料：创新与可持续发展(下册)》.
  279. 冯青，李敏，顾轶卓，刘洪新，张佐光（2010）. 不同湿热条件下碳纤维/环氧复合材料湿热性能实验研究. 《复合材料学报》.
  280. 易楠，顾轶卓，李敏，张佐光（2010）. 碳纤维复合材料界面结构的形貌与尺寸的表征. 《复合材料学报》.
  281. 甘丽，孙志杰，顾轶卓，李敏，张佐光（2010）. 升温与等温法非模型动力学研究环氧树脂固化反应. 《高分子学报》.
  282. 曹芳维，李敏，孙志杰，王绍凯，顾轶卓，张佐光（2010）. 碳纤维与环氧树脂的粘附特性研究(英文). 《'2010北京国际粘接技术研讨会论文集》.
  283. 张佐光，李敏，顾轶卓（2010）. 先进树脂基复合材料制造过程中的几个关键问题. 《2010年海峡两岸功能性复合材料论坛论文集》.
  284. 孙凯，李敏，顾轶卓，辛朝波，张佐光，刘军（2010）. 热压罐零吸胶工艺树脂压力在线测试及其变化规律. 《复合材料学报》.
  285. 陶积柏，王绍凯，李敏，顾轶卓，张佐光，李志远（2010）. 三维夹芯层连织物复合材料真空辅助成型工艺影响因素. 《复合材料学报》.
  286. 苗春卉，李敏，王绍凯，杨洁颖，顾轶卓，张佐光（2010）. 聚芳基乙炔树脂基复合材料固化缺陷的产生机制. 《复合材料学报》.
  287. 孟珍珍，顾轶卓，李敏，张佐光（2010）. 高能量超声波改性MWCNTs/环氧树脂特性分析. 《复合材料学报》.
  288. 武海生，孙志杰，贾晶晶，李敏，顾轶卓，张佐光（2010）. 高性能有机纤维单丝复合体系界面粘结性能实验研究. 《复合材料学报》.
  289. 谢旻，顾轶卓，李敏，苏玉芹，张佐光（2010）. 碳纤维/双马树脂预浸料固化过程动态力学性能. 《复合材料学报》.
  290. 朱黎黎，张佐光，李敏，王春璐，顾轶卓（2010）. 工艺温度下树脂与纤维的接触角及其粘附作用研究. 《复合材料学报》.
  291. 孙晶，李艳霞，顾轶卓，李敏，张佐光（2010）. U形层板热压罐成型温度场三维数值模拟. 《复合材料：创新与可持续发展(上册)》.
  292. 辛朝波，顾轶卓，李敏，李艳霞，张佐光（2010）. 适用于热压罐工艺的树脂压力测试系统研究. 《复合材料：创新与可持续发展(上册)》.
  293. 王绍凯，李敏，顾轶卓，吴伯明，张佐光（2010）. 三维夹芯层连织物复合材料连接特性. 《第十六届全国复合材料学术会议》.
  294. 贾晶晶，顾轶卓，李敏，张佐光（2010）. 纤维/树脂界面黏结性能单丝断裂法测试系统实验研究. 《第十六届全国复合材料学术会议》.
  295. Chaobo Xin, Yizhuo Gu, Min Li, Yanxia Li, Zuoguang Zhang (2010). Online monitoring and analysis of resin pressure inside composite laminate during zero‐bleeding autoclave process. Polymer Composites.DOI
  296. Shaokai Wang, Min Li, Yizhuo Gu, Zuoguang Zhang (2010). Studies on VARTM Forming Z-Stitched Foam Core Sandwich Composites. Polymers and Polymer Composites.DOI
  297. Shaokai Wang, Min Li, Yizhuo Gu, Zuoguang Zhang (2010). Experimental Study on Crack Defects Formation in Polyarylacetylene Composites and Modification Improvement of Resin. Journal of Composite Materials.DOI
  298. Yanxia Li, Min Li, Yizhuo Gu, Zuoguang Zhang (2010). Numerical and Experimental Study of the Bleeder Flow in Autoclave Process. Applied Composite Materials.DOI
  299. Min Li, Shaokai Wang, Yizhuo Gu, Zuoguang Zhang, Yanxia Li, Kevin D. Potter (2010). Dynamic capillary impact on longitudinal micro-flow in vacuum assisted impregnation and the unsaturated permeability of inner fiber tows. Composites Science and Technology.DOI
  300. Yizhuo Gu, Min Li, Ji Wang, Zuoguang Zhang (2010). Characterization of the interphase in carbon fiber/polymer composites using a nanoscale dynamic mechanical imaging technique. Carbon.DOI
  301. Yizhuo Gu, Min Li, Yanxia Li, Zuoguang Zhang (2010). Pressure Transfer Behaviour of Rubber Mould and the Effects on Consolidation of L-Shape Composite Laminates. Polymers and Polymer Composites.DOI
  302. Gu Yizhuo (2010). Contact angle and action of adhesion between epoxy resin and fibers at processing temperatures. Fuhe cailiao xuebao.
  303. 周娟，顾轶卓，谢旻，李敏，张佐光（2009）. 热固性预浸料凝胶特性的固体扭转测试方法. 《复合材料学报》.
  304. 鲁博，张佐光，顾轶卓，李敏，孙志杰（2009）. 一种双酚A型氰酸酯树脂流变特性及其改性研究. 《复合材料科学与工程》.
  305. 苏佳智，顾轶卓，李敏，张佐光（2009）. 弯曲载荷下碳纤维/双马复合材料湿热特性实验研究. 《复合材料学报》.
  306. 谢旻，张佐光，顾轶卓，李敏，苏玉芹，郭凯，李涵（2009）. 用DMA研究环氧预浸料的等温固化过程. 《复合材料学报》.
  307. 齐磊，李敏，顾轶卓，孙志杰，张佐光（2009）. 几种碳纤维/双马树脂复合材料湿热特性实验研究. 《航空学报》.
  308. 陈洁，李敏，张佐光，顾轶卓，孙志杰（2009）. 铁基非晶条带玻璃纤维混杂复合材料力学特性. 《复合材料学报》.
  309. 马晓东，孙志杰，顾轶卓，辛朝波，李敏，张佐光（2009）. 变厚度复合材料热压罐工艺层板厚度控制的实验研究. 《复合材料学报》.
  310. 马全胜，李敏，孙志杰，顾轶卓，张佐光（2009）. 固化阶段环氧树脂表面能及其极性变化的表征. 《复合材料学报》.
  311. 郑义珠，顾轶卓，孙志杰，李敏，张佐光（2009）. Nomex蜂窝夹层结构真空袋共固化过程蜂窝变形. 《复合材料学报》.
  312. Yizhuo Gu, Min Li, Zuoguang Zhang, Sun Zhijie (2009). Void formation model and measuring method of void formation condition during hot pressing process. Polymer Composites.DOI
  313. Yanxia Li, Min Li, Yizhuo Gu, Zuoguang Zhang (2009). Numerical and Experimental Study on the Effect of Lay-Up Type and Structural Elements on Thickness Uniformity of L-Shaped Laminates. Applied Composite Materials.DOI
  314. Min Li, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (2009). Numerical Simulation Based Process Window for Consolidation of Thermoset Composite Laminates. Polymers and Polymer Composites.DOI
  315. Min Xie, Zuoguang Zhang, Yizhuo Gu, Min Li, Yuqin Su (2009). A new method to characterize the cure state of epoxy prepreg by dynamic mechanical analysis. Thermochimica Acta.DOI
  316. Gu Yizhuo (2009). STUDY AND MODIFY ON RHEOLOGICAL PROPERTY OF A BISPHENOL A CYANATE RESIN. Fiber Reinforced Plastics/Composites.
  317. 顾轶卓，张佐光，李敏，谢富原（2008）. 复合材料变厚层板热压成型缺陷类型与成因实验研究. 《复合材料学报》.
  318. 李艳霞，张佐光，李敏，顾轶卓（2008）. 复合材料等厚层板热压成型中树脂流动过程数值模拟. 《复合材料学报》.
  319. 原崇新，李敏，顾轶卓，张佐光（2008）. 蜂窝夹层结构真空袋共固化工艺过程实验研究. 《复合材料学报》.
  320. 徐骥威，李敏，顾轶卓，张佐光（2008）. 热固性树脂中孔隙形成条件的定量测试方法与影响因素. 《复合材料学报》.
  321. 李艳霞，李敏，张佐光，顾轶卓（2008）. L形复合材料层板热压工艺密实变形过程的数值模拟. 《复合材料学报》.
  322. 谢旻，顾轶卓，李敏，孙志杰，张佐光（2008）. DMTA用于预浸料固化过程的表征研究. 《第十五届全国复合材料学术会议论文集（上册）》.
  323. 贾晶晶，李敏，顾轶卓，王冀，张佐光（2008）. E51环氧树脂固化过程表面张力测试方法与变化规律. 《第十五届全国复合材料学术会议论文集（上册）》.
  324. 辛朝波，顾轶卓，李敏，李艳霞，张佐光（2008）. L形层板热压罐工艺制造缺陷的实验分析. 《第十五届全国复合材料学术会议论文集（上册）》.
  325. 郝继军，张佐光，孙志杰，李敏，顾轶卓（2008）. X-Cor泡沫夹层结构侧压性能实验研究. 《第十五届全国复合材料学术会议论文集（上册）》.
  326. 原崇新，顾轶卓，李敏，张佐光（2008）. 蜂窝夹层结构胶接质量与面板质量工艺因素分析. 《第十五届全国复合材料学术会议论文集（上册）》.
  327. 李艳霞，李敏，顾轶卓，孙志杰，张佐光（2008）. 考虑封装材料复合材料热压温度场的数值模拟. 《第十五届全国复合材料学术会议论文集（下册）》.
  328. Yanxia Li, Min Li, Zuoguang Zhang, Yizhuo Gu (2008). Numerical analysis of parametric effects on consolidation of angle‐bended composite laminates. Polymer Composites.DOI
  329. Min Li, Yanxia Li, Zuoguang Zhang, Yizhuo Gu (2008). Pressure window analysis for thin laminated composites in autoclave process. Polymer Composites.DOI
  330. Yizhuo Gu, Min Li, Zuoguang Zhang, Yanxia Li (2008). Effects of resin storage aging on rheological property and consolidation of composite laminates. Polymer Composites.DOI
  331. Min Li, Yanxia Li, Zuoguang Zhang, Yizhuo Gu (2008). Numerical simulation of two‐dimensional flow and compaction during the consolidation of laminated composites. Polymer Composites.DOI
  332. Chongxin Yuan, Min Li, Zuoguang Zhang, Yizhuo Gu (2008). Experimental Investigation on the Co-Cure Processing of Honeycomb Structure with Self-Adhesive Prepreg. Applied Composite Materials.DOI
  333. Gu Yizhuo (2008). Numerical simulation on consolidation and deformation of L-shaped composite laminate in autoclave process. Fuhe cailiao xuebao.
  334. 汪赫男，张佐光，顾轶卓，李敏（2007）. 环氧复合材料层板热压成型孔隙缺陷影响因素. 《复合材料学报》.
  335. 邓火英，张佐光，顾轶卓，李敏（2007）. L形层板真空袋成型缺陷的实验研究. 《复合材料学报》.
  336. 周文，张佐光，顾轶卓，李敏（2007）. 热固性树脂体系流变特性随贮存条件变化规律. 《复合材料学报》.
  337. 顾轶卓，张佐光，李敏（2007）. 复合材料热压成型过程的树脂压力测试系统. 《复合材料学报》.
  338. 邓火英，顾轶卓，李敏，张佐光（2007）. 热压罐成型变厚度层板缺陷研究. 《宇航材料工艺》.
  339. 常文，张佐光，顾轶卓，李敏，孙志杰（2007）. 热压成型环氧复合材料层板孔隙缺陷可控性. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会》.
  340. 李敏，张佐光，李艳霞，顾轶卓（2007）. 复合材料层板热压工艺参数的分析与优化. 《材料工程》.
  341. 赵婧，李敏，李艳霞，张佐光，顾轶卓（2007）. 复合材料厚制件固化过程温度分布影响因素的模拟分析. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会》.
  342. 莫毓敏，张佐光，顾轶卓，李敏，孙志杰（2007）. 一种新型氰酸酯树脂流变特性及其改性研究. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会论文集》.
  343. Yanxia Li, Zuoguang Zhang, Min Li, Yizhuo Gu (2007). Numerical Simulation of Flow and Compaction During the Cure of Laminated Composites. Journal of Reinforced Plastics and Composites.DOI
  344. Min Li, Yizhuo Gu, Zuoguang Zhang, Sun Zhijie (2007). A simple method for the measurement of compaction and corresponding transverse permeability of composite prepregs. Polymer Composites.DOI
  345. Gu Yizhuo (2007). Analysis of Parameter of Pressure Application for Laminated Composites in Hot Pressing Process. Cailiao gongcheng.
  346. 刘洪新，张佐光，顾轶卓，李敏（2006）. 单向纤维布可压缩性的实验研究. 《复合材料学报》.
  347. 龚颖，张佐光，顾轶卓，孙志杰（2006）. 热压工艺参数对单向复合材料层板密实状态的影响. 《复合材料学报》.
  348. 简抗抗，张佐光，顾轶卓，孙志杰（2006）. 不同纤维堆积状态下饱和渗透率实验研究. 《复合材料学报》.
  349. 顾轶卓，张佐光，李敏，李艳霞（2006）. 复合材料热压成型过程树脂流动与纤维密实研究. 《复合材料——基础、创新、高效：第十四届全国复合材料学术会议论文集（上）》.
  350. Yizhuo Gu, Min Li, Zuoguang Zhang, Sun Zhijie (2006). Numerical Simulation and Experimental Study on Consolidation of Toughened Epoxy Resin Composite Laminates. Journal of Composite Materials.DOI
  351. 王科，张佐光，扎姆阿茹娜，顾轶卓，杨远洪（2005）. 光纤微弯压力测试系统实时监测复合材料热压成型过程. 《复合材料学报》.
  352. 顾轶卓，张佐光，李敏，张大兴（2005）. 新型环氧-酚醛树脂体系的固砂原理与技术. 《北京航空航天大学学报》.

预印本

  1. Xiao Wang, Haipeng Liu, Yanjie Wang, Li Li, Kai Feng Li, Yizhuo Gu, Guojie Liang, Shaokai Wang, Min Li (2023). Structural Analysis of High Thermal Conductivity Mesophase Pitch-Based Carbon Foam with Numerical Simulation for Thermal Conductivity Prediction. SSRN Electronic Journal.DOI

研究方向

材料科学有机化工航空航天科学与工程

此主页由公开资料整理，尚未经学者本人认领。