霍元明｜上海工程技术大学｜学者主页

2026

金属高应变率塑性成形时微观组织与力学性能演变机制研究综述

马克骋，霍元明，刘富贵，顾春晖，相少华，苗佳琦，马时进，王新宇，孙悦，蒋安琪

《塑性工程学报》

2026

不同能场对金属材料塑性诱导提升的技术研究现状

王新宇，霍元明，王志军，严祯荣，何涛，樊晓光，余雯翰，李志伟，王昭昭，孙乐乐

《塑性工程学报》

2026

基于GA-BP神经网络的12Cr1MoV晶粒尺寸激光超声识别研究

王钳华，严祯荣，王化南，霍元明，安壮壮，陈乐，李森林

《激光技术》

2026

High-throughput nanoindentation study on annealing-induced microstructural evolution and local creep behavior of NiAlCrFeMo high-entropy alloy

Yue Sun, Yuanming Huo, Zhi-Jun Wang, Zhiwei Li, Zhao-Zhao Wang, Xiaoguang Yue, S. R. Elmi Hosseini, Anqi Jiang, Xinyu Wang

Intermetallics (Barking)

DOI

2026

Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy

Jiaqi Miao, Yuanming Huo, Zixin Zhou, Anqi Jiang, Zhijun Wang, M. Crabbe, Gabriel Xiao-Guang Yue

Journal of Vacuum Science & Technology A

DOI

2026

Microstructural evolution and mechanical property optimization of a dual-phase AlCrFeNiMo high-entropy alloy during hot rolling

Fenfen Bai, Yuanming Huo, X G 晓光 Wang 王, Wenhan Yu, Jiaqi Miao, Kecheng Ma, Zhijun Wang, Gabriel Xiao-Guang Yue, Rakib Efendiev

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films

DOI

2025

晶体塑性理论及其在金属高低周疲劳寿命预测中的应用

蒋安琪，霍元明，周子鑫，严祯荣，何涛，王昭昭，纪宏超，孙悦，王新宇

《塑性工程学报》

2025

金属管道高温高压服役环境下微观损伤的激光超声识别

王化南，王钳华，李森林，朱水兴，霍元明，严祯荣

《无损检测》

2025

9-12%回火马氏体钢高温蠕变微观机制研究进展

孙悦，霍元明，严祯荣，何涛，王化南，余雯翰，周子鑫，蒋安琪，王新宇

《塑性工程学报》

2025

均匀化处理对7050铝合金ECAP的成形性影响机制

贾东昇，何涛，杜向阳，霍元明

《热加工工艺》

2025

Microstructure and nanoindentation creep behavior of NiAlCrFeMo high-entropy alloy

Yue Sun, Yuanming Huo, Wen-Han Yu, Zhenrong Yan, Zhi-Jun Wang, Zhiwei Li, Zhao-Zhao Wang, Hao Chen, Anqi Jiang, Xinyu Wang

Journal of Alloys and Compounds

DOI

2025

Comparison of Modified Arrhenius, Modified Zerilli–Armstrong, and Long Short-Term Memory Models for Predicting Hot Deformation Behavior of NiAlCrFeMo High-Entropy Alloy

Xinyu Wang, Yuanming Huo, Zhi-Jun Wang, Zhenrong Yan, Wen-Han Yu, Ke Ma, Hao Chen, Yue Sun, M. Crabbe, Xiaoguang Yue

Journal of materials engineering and performance (Print)

DOI

2025

An unified viscoplastic micro-damage constitutive model for NiAlCrFeMo high-entropy alloys at elevated temperatures considering triaxiality stress

Hao Chen, Yuanming Huo, Zhi-Jun Wang, Zhenrong Yan, Seyed Reza Elmi Hosseini, Hongchao Ji, Wen-Han Yu, Zhao-Zhao Wang, Zhiwei Li, Xiaoguang Yue

Journal of Alloys and Compounds

DOI

2025

Low-cycle fatigue behavior and life prediction of rolled WE43-T5 magnesium alloy: Experiments and crystal plasticity finite element method

Anqi Jiang, Yuanming Huo, Eralp Demir, Zixin Zhou, Zhenrong Yan, Yue Sun

Materials Today Communications

DOI

2025

Finite Element Simulation and Process Analysis for Hot-Forming WE43 Magnesium Alloy Fasteners: Comparison of Crystal Plasticity with Traditional Method

Anqi Jiang, Yuanming Huo, Zixin Zhou, Zhenrong Yan, Yue Sun

Metals

DOI

2025

Microstructure and Mechanical Properties of NiAlCrFeMo High-Entropy Alloy Sheet under Different Hot-Rolling Parameters

Xinyu Wang, Yuanming Huo, Zhijun Wang, Zhenrong Yan, Wenhan Yu, Yue Sun, Hao Chen, Anqi Jiang

Journal of Materials Engineering and Performance

DOI

2024

工艺参数对7075铝合金室温等通道转角拉伸载荷的影响

陈细林，何涛，杜向阳，霍元明，张俊杰，李健，张超

《塑性工程学报》

2024

Establishing a Unified Viscoplastic Constitutive Equation for EA4T Steel: Comparative Analysis with Arrhenius Model

Hao Chen, Yuanming Huo, Tao He, Zhenrong Yan, Zhiwei Li, Hongchao Ji, Seyed Reza Elmi Hosseini, Zhao-Zhao Wang, Zhiyuan Bian, Wen-Han Yu, Zixin Zhou

International Journal of Non-Linear Mechanics

DOI

2024

Experimental investigation and crystal plasticity modelling of dynamic recrystallisation in dual-phase high entropy alloy during hot deformation

Zixin Zhou, Yuanming Huo, Zhijun Wang, Eralp Demir, Anqi Jiang, Zhenrong Yan, Tao He

Materials Science and Engineering A

DOI

2024

Optimization of the Hot Working Parameters and Constitutive Analysis of NiAlCrFeMo High-Entropy Alloy during Hot Forming

Wenhan Yu, Yuanming Huo, Zhijun Wang, Tao He, Zhenrong Yan, Hongchao Ji, Hao Chen

Journal of Materials Engineering and Performance

DOI

2024

Microstructure evolution and mechanical properties of NiAlCrFeMo high entropy superalloy after different annealing treatment

Wenhan Yu, Yuanming Huo, Zhijun Wang, Zhenrong Yan, Tao He, Seyed Reza Elmi Hosseini, Hongchao Ji, Hao Chen

Intermetallics

DOI

2024

Effect of Pre-Equal Channel Angular Pressing Homogenization on Microstructure and Mechanical Properties of As-Cast 7050 Al Alloy

Junjie Zhang, Tao He, Xiangyang Du, Yuanming Huo, Dongsheng Jia, Xilin Chen

Journal of Materials Engineering and Performance

DOI

2024

CoCrFeNiMoTi High-Entropy Alloy Reinforced Mg Matrix Composites Produced by Multi-pass Friction Stir Processing: Focus on Pin Geometry, Microstructure and Mechanical Properties

Hamid Reza Ezatpour, M. Jalalabadi, Yuanming Huo, Hamid Sazegaran

Transactions of the Indian Institute of Metals

DOI

2024

Crystal plasticity finite element method investigation of normal tensile deformation anisotropy in rolled pure titanium sheet

Gang Chen, Yuanming Huo, Jianguo Lin, Tao He, Zhiwei Li, Zhenrong Yan, Hongchao Ji, Hamidreza Ezatpour, Donghai Lin

Thin-Walled Structures

DOI

2024

Microstructure, mechanical and tribological properties of Mg/CoCrFeNiMoTi high entropy alloy composites produced via FSP

Hamid Reza Ezatpour, M. Jalalabadi, Yuanming Huo, G.R. Ebrahimi

Engineering Failure Analysis

DOI

2023

EA4T车轴钢高温拉伸变形行为及塑性损伤演变规律

卞志远，霍元明，何涛，白杰，任旭，杜向阳

《锻压技术》

2023

基于高温拉伸与压缩实验的LZ50车轴钢热加工图研究

李诗谦，何涛，霍元明，杜向阳，贾东昇，李汉林

《塑性工程学报》

2023

多楔异速轧制25CrMo4实心车轴仿真结果分析

霍元明，刘克然，何涛，陈港

《塑性工程学报》

2023

等通道转角挤压与后续冷镦成形过程中7050铝合金紧固件的微观组织演变规律（英文）

贾东昇，何涛，宋淼，霍元明，杜向阳，Aleksey VERESHCHAKA，李健，胡华彦

Journal of Central South University

2023

修正的J-C和Z-A模型对LZ50钢高温流变应力预测

李诗谦，何涛，杜向阳，霍元明，贾东昇，李汉林

《钢铁》

2023

LZ50车轴钢高温拉伸变形本构模型研究

李汉林，何涛，霍元明，杜向阳，李诗谦，贾东昇

《锻压技术》

DOI

2023

铸态7075铝合金均匀化过程中晶粒生长动力学研究

张俊杰，何涛，霍元明，杜向阳，陈细林

《塑性工程学报》

2023

等通道转角挤压对真空吸铸成形纯铝力学性能及微观组织的影响

李健，何涛，贾东昇，霍元明，张俊杰，陈细林

《锻压技术》

2023

7075铝合金室温等通道转角拉伸模拟与试验

陈细林，何涛，霍元明，杜向阳，张俊杰，李健，张超

《锻压技术》

2023

Influence of niobium and hafnium doping on the wear and corrosion resistance of coatings based on ZrN

Tao He, Valery Zhylinski, Alexey Vereschaka, Anthon Keshin, Yuanming Huo, Filipp O. Milovich, Catherine S. Sotova, Anton Evgenievich Seleznev

Journal of Materials Research and Technology

DOI

2023

Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy

Dong-sheng Jia, Tao He, Miao Song, Yuanming Huo, Huayan Hu

Journal of Materials Research and Technology

DOI

2023

A multi-scale modelling by coupling cellular automata with finite element method and its application on cross-wedge rolling

Xu Ren, Yuanming Huo, Seyed Reza Elmi Hosseini, Tao He, Zhenrong Yan, Fábio A. O. Fernandes, António B. Pereira, Hongchao Ji, Jie Bai, Zhi-Yuan Bian, Xiangyang Du

Materials Today Communications

DOI

2023

Punching shear failure behavior of fine-grained ZK60 Mg alloy processed by a novel forward shear normal extrusion process at room and elevated temperatures

Hamid Reza Ezatpour, M. Torabi Parizi, G.R. Ebrahimi, Yuanming Huo

Engineering Failure Analysis

DOI

2023

The effect of electrospinning time on the structure and mechanical properties of TiO2 continuous nanofibers reinforced aluminum matrix composites

Davoud Khademi, Hamidreza Ezatpour, Yuanming Huo

Ceramics International

DOI

2023

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

Yuanming Huo, Wenhan Yu, Tao He, Seyed Reza Elmi Hosseini, Hongchao Ji, Jie Bai, Hao Chen, Zixin Zhou

Transactions of the Indian Institute of Metals

DOI

2023

Numerical prediction of microstructure evolution of high-speed railway axle formed using hot cross wedge rolling

Yuanming Huo, Cunlong Huo, Xu Ren, Tao He, Seyed Reza Elmi Hosseini, Baoyu Wang, Yongliang Cui, Changyuan Jia, Keran Liu, Xiangyang Du

Materials Today Communications

DOI

2023

Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method

Jie Bai, Yuanming Huo, Tao He, Zhi-Yuan Bian, Xu Ren, Xiangyang Du

Journal of Materials Engineering and Performance

DOI

2023

Constitutive Model and Cellular Automaton Simulation of the Dynamic Recrystallization of Railway EA4T‐Grade Steel

Xu Ren, Yuanming Huo, Tao He, Seyed Reza Elmi Hosseini, Zhi-Yuan Bian, Jie Bai, Xiangyang Du

steel research international

DOI

2022

镁合金从工艺到应用的发展研究现状

贾昌远，霍元明，何涛，杨万博，霍存龙，刘克然

《农业装备与车辆工程》

2022

航空航天紧固件用TC16钛合金在冷压缩过程中的组织演变（英文）

杨万博，霍元明，何涛，薛勇，胡玉佳，沈梦蓝

《稀有金属材料与工程》

2022

金属塑性损伤力学模型研究进展

贾东昇，何涛，霍元明，高建烨，李诗谦

《塑性工程学报》

2022

40CrNiMo钢高温拉伸变形行为和组织演变规律

贾昌远，霍元明，何涛，霍存龙，刘克然

《金属热处理》

2022

6063铝合金航空铆钉等径角挤压-冷镦复合成形实验研究

李诗谦，何涛，霍元明，姚婷婷，贾东昇，李汉林

《锻压技术》

DOI

2022

基于GA-Arrhenius本构模型的EA4T钢高温变形行为

白杰，霍元明，何涛，任旭，卞志远，王宝雨，杜向阳

《锻压技术》

DOI

2022

LZ50车轴钢高温拉伸变形行为及塑性损伤形成机理

李汉林，何涛，霍元明，杜向阳，李诗谦，贾东昇

《塑性工程学报》

2022

Corrigendum to ‘Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling’ [Materials Today Communications Volume 33, December 2022, 104942]

Yuanming Huo, Changyuan Jia, Tao He, Seyed Reza Elmi Hosseini, Wangqing Wu, Cunlong Huo, Baoyu Wang

Materials Today Communications

DOI

2022

Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling

Changyuan Jia, Yuanming Huo, Tao He, Seyed Reza Elmi Hosseini, Wangqing Wu, Cunlong Huo, Baoyu Wang

Materials Today Communications

DOI

2022

A Novel Unified Visco-Plastic Damage Constitutive Model Considering Stress State of TC16 Titanium Alloy during Cold Deformation

Yuanming Huo, Wanbo Yang, Tao He, Jie Bai, Jianye Gao, Cunlong Huo

Journal of Materials Engineering and Performance

DOI

2022

HOT-COMPRESSION DEFORMATION BEHAVIOR AND CONSTITUTIVE EQUATIONS OF LZ50 AXLE STEEL

Dongsheng Jia, Tao He, Yuanming Huo, Xiangyang Du, Baoyu Wang, Shiqian Li, Hanlin Li

Materiali in tehnologije

DOI

2022

Comparison of Five Different Models Predicting the Hot Deformation Behavior of EA4T Steel

Jie Bai, Yuanming Huo, Tao He, Zhi-Yuan Bian, Xu Ren, Xiangyang Du

Journal of Materials Engineering and Performance

DOI

2022

A Review: Double Multivariate Nonlinear Regression Constitutive Model of High-Speed Train Axle Steel 40CrNiMo during Hot Tension

Changyuan Jia, Yuanming Huo, Tao He, Cunlong Huo, Keran Liu, Baoyu Wang, Xiangyang Du

JOM

DOI

2021

AA6063铝合金韧性断裂断口分析

李汉林，何涛，霍元明，高建烨，李诗谦，贾东昇

《上海工程技术大学学报》

2021

40CrNiMo钢高温低速压缩变形行为及微观组织演变

霍存龙，霍元明，何涛，贾昌远，杨万博，刘克然

《材料热处理学报》

DOI

2021

基于Bai-Wierzbicki准则的ECAP塑性损伤研究

高建烨，何涛，霍元明，宋淼，姚婷婷，杨万博

《塑性工程学报》

2021

25CrMo4车轴钢高温变形多元非线性回归本构模型

刘克然，霍元明，何涛，霍存龙，贾昌远，杨万博

《塑性工程学报》

2021

Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063

Jianye Gao, Tao He, Yuanming Huo, Miao Song, Tingting Yao, Wanbo Yang

Chinese Journal of Mechanical Engineering

DOI

2021

HIGH-TEMPERATURE DEFORMATION BEHAVIOR AND HOT-PROCESSING MAP OF 25CrMo4 AXLE STEEL BASED ON FRICTION CORRECTION

Keran Liu, Yuanming Huo, Tao He, Cunlong Huo, Changyuan Jia, Xiangyang Duo, Baoyu Wang

Materiali in tehnologije

DOI

2021

MECHANICAL BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF THE Ti-3Al-5Mo-4.5V ALLOY AT AN ELEVATED DEFORMATION TEMPERATURE

Menglan Shen, Yuanming Huo, Tao He, Yong Jun Xue, Yujia Hu, Wanbo Yang

Materiali in tehnologije

DOI

2020

底漏式真空吸铸压力控制系统研究

东星倩，何涛，霍元明，孙安娜，王京

《现代制造工程》

DOI

2020

TC16钛合金航空紧固件冷镦成形实验研究

杨万博，霍元明，何涛，胡玉佳，沈梦蓝，霍存龙，刘克然，贾昌远

《塑性工程学报》

2020

SiC纳米颗粒表面处理方式对增强铝基复合材料组织和性能的影响

姚婷婷，何涛，王京，霍元明，高建烨

《现代制造工程》

DOI

2020

304不锈钢/TiNi纤维对增强ZL105A复合材料组织和性能的影响

孙安娜，何涛，霍元明，东星倩，王京

《现代制造工程》

DOI

2020

25CrMo4钢热压缩变形行为及流变应力本构方程

江洋，王宝雨，霍元明，肖星

《塑性工程学报》

2020

Forming analysis of steel ball bearings made with warm skew rolling

Yuanming Huo, Tao He, B. Wang, Zhenhua Zheng, W. Yang, Youmin Hu, Meng Shen

Materiali in tehnologije

DOI

2020

Comparison of two constitutive modelling methods in application of TC16 alloy at the elevated deformation temperature

Menglan Shen, Yuanming Huo, Tao He, Yong Jun Xue, Wanbo Yang, Yujia Hu, Xinxing Jiang

Materials Today Communications

DOI

2020

Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling

Yuanming Huo, Tao He, Baoyu Wang, Zhenhua Zheng, Yong Jun Xue

Metallurgical and Materials Transactions A

DOI

2020

Mechanical behavior and microstructure evolution of TC4 alloy during high temperature plastic deformation

Yujia Hu, Yuanming Huo, Tao He

Procedia Manufacturing

DOI

2020

Effects of different deformation routes of ECAP on AA6063 mechanical properties and microstructure

Jianye Gao, Tao He, Yuanming Huo, Tingting Yao, Haoyang Hong

Procedia Manufacturing

DOI

2020

Effect of deformation routes on microstructure of AA6063 during equal channel angular pressing

Tingting Yao, Tao He, Yuanming Huo, Jianye Gao, Haoyang Hong

Procedia Manufacturing

DOI

2019

真空吸铸水冷系统参数对铸件温降速率的影响

孙安娜，何涛，霍元明，东星倩，王京

《有色金属(冶炼部分)》

2019

楔横轧成形25CrMo4厚壁空心轴件的不圆度分析

江洋，王宝雨，霍元明，肖星

《工程科学学报》

DOI

2019

ZL116铝合金真空吸铸的有效应力分布预测与控制

潘婷婷，何涛，霍元明，赖磊捷，余宽平

《轻工机械》

2019

不同路径下等通道转角挤压变形规律研究

孙安娜，何涛，霍元明，东星倩，高建烨

《塑性工程学报》

2019

铝合金铸件定向凝固过程的数值模拟

衣晓杰，何涛，霍元明，赖磊捷，徐亚军

《中国冶金》

DOI

2019

短碳纤维增强铝基复合材料拉伸性能数值模拟分析

东星倩，何涛，霍元明，刘洪君，孙安娜，洪浩洋

《锻压技术》

DOI

2019

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidification parameters

X. Yi, Tao He, Yuanming Huo, Shuwen Chen, Yuling Xu, A. Y. Mahamane Sani

Materiali in tehnologije

DOI

2019

Microstructure evolution and unified constitutive equations for the elevated temperature deformation of SAE 52100 bearing steel

Yuanming Huo, Tao He, Shoushuang Chen, Hongchao Ji, Riming Wu

Journal of Manufacturing Processes

DOI

2018

底漏式真空吸铸铝合金成形缺陷仿真与实验研究

余宽平，何涛，霍元明，赖磊捷，潘婷婷

《轻工机械》

2018

ZL114A合金定向凝固过程的模拟与实验

徐亚军，何涛，霍元明，赖磊捷，衣晓杰

《轻工机械》

2018

Modeling of Carbide Spheroidization Mechanism of 52100 Bearing Steel Under Warm Forming Conditions

Tao He, Yuanming Huo, Xiaojun Shi, Shoushuang Chen

Metallurgical and Materials Transactions A

DOI

2018

Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy

Tao He, H. J. Liu, X. J. Shi, Yuanming Huo, Min Li, T. T. Pan

Strength of Materials

DOI

2018

Mechanical Behavior and Microstructure Evolution of Bearing Steel 52100 During Warm Compression

Yuanming Huo, Tao He, Shoushuang Chen, Riming Wu

JOM

DOI

2017

A New Damage Evolution Model for Cold Forging of Bearing Steel-Balls

Tao He, Yuanming Huo

Transactions of the Indian Institute of Metals

DOI

2016

淬火水温和回火温度对60Si2CrVA钢微观组织和硬度的影响

张春蕾，王宝雨，周靖，霍元明，黄河

《金属热处理》

2013

楔横轧高铁车轴钢25CrMo4塑性损伤形成机理

霍元明，王宝雨，林建国，周靖

《东北大学学报(自然科学版)》

2012

金属高温塑性成形微观组织演变研究进展

霍元明，王宝雨，林建国

《塑性工程学报》

精选作品

期刊论文

金属高应变率塑性成形时微观组织与力学性能演变机制研究综述

不同能场对金属材料塑性诱导提升的技术研究现状

基于GA-BP神经网络的12Cr1MoV晶粒尺寸激光超声识别研究

High-throughput nanoindentation study on annealing-induced microstructural evolution and local creep behavior of NiAlCrFeMo high-entropy alloy

Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy

Microstructural evolution and mechanical property optimization of a dual-phase AlCrFeNiMo high-entropy alloy during hot rolling

晶体塑性理论及其在金属高低周疲劳寿命预测中的应用

金属管道高温高压服役环境下微观损伤的激光超声识别

9-12%回火马氏体钢高温蠕变微观机制研究进展

均匀化处理对7050铝合金ECAP的成形性影响机制

Microstructure and nanoindentation creep behavior of NiAlCrFeMo high-entropy alloy

Comparison of Modified Arrhenius, Modified Zerilli–Armstrong, and Long Short-Term Memory Models for Predicting Hot Deformation Behavior of NiAlCrFeMo High-Entropy Alloy

An unified viscoplastic micro-damage constitutive model for NiAlCrFeMo high-entropy alloys at elevated temperatures considering triaxiality stress

Low-cycle fatigue behavior and life prediction of rolled WE43-T5 magnesium alloy: Experiments and crystal plasticity finite element method

Finite Element Simulation and Process Analysis for Hot-Forming WE43 Magnesium Alloy Fasteners: Comparison of Crystal Plasticity with Traditional Method

Microstructure and Mechanical Properties of NiAlCrFeMo High-Entropy Alloy Sheet under Different Hot-Rolling Parameters

工艺参数对7075铝合金室温等通道转角拉伸载荷的影响

Establishing a Unified Viscoplastic Constitutive Equation for EA4T Steel: Comparative Analysis with Arrhenius Model

Experimental investigation and crystal plasticity modelling of dynamic recrystallisation in dual-phase high entropy alloy during hot deformation

Optimization of the Hot Working Parameters and Constitutive Analysis of NiAlCrFeMo High-Entropy Alloy during Hot Forming

Microstructure evolution and mechanical properties of NiAlCrFeMo high entropy superalloy after different annealing treatment

Effect of Pre-Equal Channel Angular Pressing Homogenization on Microstructure and Mechanical Properties of As-Cast 7050 Al Alloy

CoCrFeNiMoTi High-Entropy Alloy Reinforced Mg Matrix Composites Produced by Multi-pass Friction Stir Processing: Focus on Pin Geometry, Microstructure and Mechanical Properties

Crystal plasticity finite element method investigation of normal tensile deformation anisotropy in rolled pure titanium sheet

Microstructure, mechanical and tribological properties of Mg/CoCrFeNiMoTi high entropy alloy composites produced via FSP

EA4T车轴钢高温拉伸变形行为及塑性损伤演变规律

基于高温拉伸与压缩实验的LZ50车轴钢热加工图研究

多楔异速轧制25CrMo4实心车轴仿真结果分析

等通道转角挤压与后续冷镦成形过程中7050铝合金紧固件的微观组织演变规律（英文）

修正的J-C和Z-A模型对LZ50钢高温流变应力预测

LZ50车轴钢高温拉伸变形本构模型研究

铸态7075铝合金均匀化过程中晶粒生长动力学研究

等通道转角挤压对真空吸铸成形纯铝力学性能及微观组织的影响

7075铝合金室温等通道转角拉伸模拟与试验

Influence of niobium and hafnium doping on the wear and corrosion resistance of coatings based on ZrN

Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy

A multi-scale modelling by coupling cellular automata with finite element method and its application on cross-wedge rolling

Punching shear failure behavior of fine-grained ZK60 Mg alloy processed by a novel forward shear normal extrusion process at room and elevated temperatures

The effect of electrospinning time on the structure and mechanical properties of TiO2 continuous nanofibers reinforced aluminum matrix composites

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

Numerical prediction of microstructure evolution of high-speed railway axle formed using hot cross wedge rolling

Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method

Constitutive Model and Cellular Automaton Simulation of the Dynamic Recrystallization of Railway EA4T‐Grade Steel

镁合金从工艺到应用的发展研究现状

航空航天紧固件用TC16钛合金在冷压缩过程中的组织演变（英文）

金属塑性损伤力学模型研究进展

40CrNiMo钢高温拉伸变形行为和组织演变规律

6063铝合金航空铆钉等径角挤压-冷镦复合成形实验研究

基于GA-Arrhenius本构模型的EA4T钢高温变形行为

LZ50车轴钢高温拉伸变形行为及塑性损伤形成机理

Corrigendum to ‘Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling’ [Materials Today Communications Volume 33, December 2022, 104942]

Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling

A Novel Unified Visco-Plastic Damage Constitutive Model Considering Stress State of TC16 Titanium Alloy during Cold Deformation

HOT-COMPRESSION DEFORMATION BEHAVIOR AND CONSTITUTIVE EQUATIONS OF LZ50 AXLE STEEL

Comparison of Five Different Models Predicting the Hot Deformation Behavior of EA4T Steel

A Review: Double Multivariate Nonlinear Regression Constitutive Model of High-Speed Train Axle Steel 40CrNiMo during Hot Tension

AA6063铝合金韧性断裂断口分析

40CrNiMo钢高温低速压缩变形行为及微观组织演变

基于Bai-Wierzbicki准则的ECAP塑性损伤研究

25CrMo4车轴钢高温变形多元非线性回归本构模型

Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063

HIGH-TEMPERATURE DEFORMATION BEHAVIOR AND HOT-PROCESSING MAP OF 25CrMo4 AXLE STEEL BASED ON FRICTION CORRECTION

MECHANICAL BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF THE Ti-3Al-5Mo-4.5V ALLOY AT AN ELEVATED DEFORMATION TEMPERATURE

底漏式真空吸铸压力控制系统研究

TC16钛合金航空紧固件冷镦成形实验研究

SiC纳米颗粒表面处理方式对增强铝基复合材料组织和性能的影响

304不锈钢/TiNi纤维对增强ZL105A复合材料组织和性能的影响

25CrMo4钢热压缩变形行为及流变应力本构方程

Forming analysis of steel ball bearings made with warm skew rolling

Comparison of two constitutive modelling methods in application of TC16 alloy at the elevated deformation temperature

Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling

Mechanical behavior and microstructure evolution of TC4 alloy during high temperature plastic deformation

Effects of different deformation routes of ECAP on AA6063 mechanical properties and microstructure

Effect of deformation routes on microstructure of AA6063 during equal channel angular pressing

真空吸铸水冷系统参数对铸件温降速率的影响

楔横轧成形25CrMo4厚壁空心轴件的不圆度分析

ZL116铝合金真空吸铸的有效应力分布预测与控制

不同路径下等通道转角挤压变形规律研究